Model TS spray paint
Model TS spray paints for vibrant, durable paintwork: ideal for precise, even colour results and a long-lasting surface coating!
TS spray colours
TS-13 Clear Gloss 100 ml, paint spray, clear coat
300085013€10.491 l = €104.90
TS-13 Clear Gloss is a 100 ml clear coat spray for model finishing, designed to add a transparent gloss layer over painted surfaces while leaving the underlying colour visible. The aerosol format supports fast, even coverage across larger sections such as bodyshells, body panels and other exterior parts where a uniform sheen matters. The formula is identified in the supplied data as a special acrylic resin spray, and the can is marked for plastics, making it suitable for plastic model work. Applied in light coats, the clear layer helps bring separate painted sections into a more consistent overall finish and can visually unify decals and colour areas under one glossy surface. The spray can format also suits broad curves and recessed shapes that are slower to cover with a brush. REACH declaration data states that this version does not contain substances of very high concern above 0.1% according to the ECHA Candidate List. For model builders working on car bodies, fairings or other display surfaces, TS-13 Clear Gloss adds the final reflective layer that completes the painted look. The can should be shaken vigorously before use and sprayed in a well-ventilated area, with attention to the hazard guidance shown for flammability and irritation. Warning! Not suitable for children under 14 years.
TS spray colours
TS-14 Black Gloss, spray paint, 100 ml
300085014€10.491 l = €104.90
TS-14 Black Gloss is a 100 ml spray paint for model finishing, combining a deep black tone with a gloss surface that suits body shells, exterior panels and other visible parts. The aerosol format covers wider areas quickly, making it useful when a model needs an even sprayed coat rather than brush marks. This TS paint is described as a special acrylic resin spray and is presented for plastic model use. Light coats can be built up across curved sections, edges and recessed areas, which helps keep the finish visually consistent on shaped parts. The can label identifies it as TS-14 and marks the net volume as 100 ml. The safety data for this aerosol classifies it as an extremely flammable aerosol under pressure, with storage and handling precautions that belong to workshop use. The same documentation also identifies the mixture as containing binders, pigments and solvents in a pressurised can. On the bench, this kind of spray paint fits body preparation, colour coating and final exterior finishing on scale builds where a gloss black surface is part of the look. It can be used when separate parts need the same colour match across the model, or when larger plastic sections call for a sprayed finish with steady visual coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-80 Flat Clear, paint spray, 100 ml lacquer
300085080€11.491 l = €114.90
TS-80 Flat Clear is a 100 ml spray lacquer for model finishing, designed to cover larger surfaces quickly and leave a flat final look over glossy paint finishes. The aerosol format suits broad body panels and shell sections where an even coat matters, and the synthetic lacquer cures in a short period of time to keep paint work progressing between stages. This spray is part of the TS paint range and is intended for model use where a smooth clear coat is needed across full surfaces rather than small brush-painted areas. One can is enough to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a useful guide when planning a full shell finish or multiple smaller projects. The formula is not affected by acrylic or enamel paints, so once the main painted assembly is complete, further detail work can be added with those paint types. For clear coating, the underlying paint should be fully cured before TS-80 is applied; the guidance given is up to 1 week to avoid cracking caused by different cure rates. Clear coating over decals should also be tested first, as some decals can be harmed by the coat. On the bench, TS-80 suits full-body finishing, panel-by-panel top coating and final surface adjustment when a glossy base needs a flatter appearance. In model car work, it gives a straightforward way to unify the finish across larger exterior areas before smaller painted details are picked out separately. Warning! Not suitable for children under 14 years.
TS spray colours
TS-17 Aluminum Silver Gloss, spray paint, 100 ml
300085017€10.491 l = €104.90
TS-17 Aluminum Silver Gloss is a 100 ml spray paint for model finishing, built to cover larger surfaces quickly with a bright metallic silver tone and a gloss sheen. The aerosol format helps lay colour across body shells, fairings and shaped parts in smooth passes, creating an even look on broad panels and tighter contours alike. This TS colour belongs to the special acrylic resin spray range and is intended for plastic model work. The aluminum silver shade suits full-body colour coats as well as accent areas where a reflective metal effect is needed. On car bodies, aircraft sections or mechanical details, the gloss finish gives edges and panel shapes stronger definition under light. The spray format also helps reach vents, recesses and curved mouldings that are slower to cover with a brush. For hobby benches that handle multiple subassemblies, the 100 ml can offers enough paint for repeated finishing sessions across several parts. Used for scale models, custom bodies or detail refresh work, TS-17 fits projects that call for a clean metallic surface rather than a flat coat. Light, even passes support controlled coverage on spoilers, cowls, fuselage sections and armour panels. This makes the shade a practical choice when a build needs a crisp silver finish with the speed and reach of aerosol application. Warning! Not suitable for children under 14 years.
TS spray colours
TS-29 Semi Gloss Black, spray paint, 100 ml
300085029€10.491 l = €104.90
TS-29 Semi Gloss Black brings a controlled black finish to model work with a 100 ml aerosol can and a semi gloss surface effect that sits between flat and full gloss. The special acrylic resin formula is made for plastics, making it a practical choice for colouring body parts, panels and other compatible model sections where an even sprayed coat matters. The aerosol format changes how the paint reaches the surface: instead of loading a brush, the colour is sprayed across wider areas in a continuous mist, which helps keep the finish more uniform on broad panels and curved shapes. Semi Gloss Black suits builds that need a darker tone with a slight sheen rather than a fully reflective look. The can is part of the TS paint range, a line used for model finishing where colour accuracy and surface appearance shape the final look of the build. The 100 ml net volume also gives useful capacity for larger shells or several smaller parts within one project. On the bench, TS-29 fits body painting, panel work and colour matching across separate components in the same build. It also works well when a project calls for black trim, darker accent sections or a consistent repaint of replacement parts on compatible plastic models. Warning! Not suitable for children under 14 years.
TS spray colours
TS-26 White Gloss, spray paint, 100 ml aerosol
300085026€10.491 l = €104.90
TS-26 White Gloss brings a bright solid tone and a reflective finish to model painting, with a 100 ml aerosol format that suits broad, even coverage on plastic parts. The spray can layout supports fast colour application across body sections and shaped components where a brush can leave visible stroke patterns. The can is identified as a special acrylic resin spray within the TS paint range, giving model makers a dedicated finishing option for hobby work. Visible use guidance on the can recommends shaking vigorously and applying light coats from 25 to 30 cm, a method that helps the paint build up in controlled layers rather than flooding fine contours. The gloss white shade works well where a clean, high-contrast surface is needed for racing liveries, civil vehicle finishes or custom colour schemes. The 100 ml fill also gives enough material for repeated passes across larger shells, wings or body panels in one painting session. On the bench, the aerosol format fits projects that move from primed parts to final colour with minimal interruption. It can be used when separate model sections need a uniform white coat before decals, trim painting or display finishing, keeping the overall look crisp and consistent across matched parts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-8 Italian Red Gloss, spray paint, 100 ml
300085008€10.491 l = €104.90
TS-8 Italian Red Gloss brings a vivid gloss red finish to plastic model surfaces in a 100 ml spray format that covers broad exterior areas quickly and evenly. The special acrylic resin paint is designed for model work, making it a practical choice for body shells, fairings, panels and other visible outer parts where a smooth colour coat shapes the final look. The aerosol format changes how the paint is applied: light passes from the can lay colour across curves, edges and larger sections without the brush marks that can interrupt a uniform surface. The label identifies this as paint for plastics, so it fits projects built around plastic model components rather than general household use. As part of the TS spray range, the shade name TS-8 Italian Red Gloss gives a clear match point when planning a specific colour scheme or replacing a previous can in an ongoing build. On the bench, the 100 ml volume suits full-body colour work as well as refresh coats on selected sections. The gloss finish works especially well on racing, road or custom subjects where a strong red surface and clean reflections help the painted parts read clearly once decals and final details are added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-38 Gun Metal Semi Gloss, spray paint, 100 ml
300085038€10.491 l = €104.90
TS-38 Gun Metal Semi Gloss is a 100 ml spray paint for model building, supplied in an aerosol can for direct application to plastic parts. The Gun Metal tone combines a metallic grey look with a semi gloss finish, making it useful for body sections, trim pieces and mechanical areas that benefit from a darker sprayed color with a subtle sheen. The TS paint format is suited to covering broader surfaces quickly, especially where curved shells, panel shapes or recessed details are harder to finish evenly with a brush. The aerosol spray lays down color across larger sections in one continuous pass, which helps keep the finish visually consistent on scale model components. For builds that call for more shine, the color coat can be followed with TS-13 glossy clear coat. This adds a glossier top layer while keeping the underlying TS-38 shade in place. On a car bodyshell, aircraft section or other plastic model assembly, the Gun Metal shade works well for contrast areas, technical details and darker accent zones. The 100 ml can size fits neatly into hobby bench use, whether the goal is a full exterior coat or selected sprayed sections that need a metallic grey finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-30 Metallic Silver Gloss, spray paint, 100 ml
300085030€10.491 l = €104.90
TS-30 Metallic Silver Gloss is a spray paint for model finishing that combines a metallic silver tone with a gloss surface in a 100 ml aerosol format. The special acrylic resin spray is intended for model work, where broad panels, curved sections and shaped parts benefit from an even coat laid down by a fine spray rather than a brush. The can is marked for plastics, making it suitable for compatible plastic model parts that need a uniform metallic appearance. Aerosol application helps cover contours, edges and recessed areas with the same colour character, which is especially useful when a build includes multiple connected surfaces. The metallic silver shade works well wherever a bright machined look, body colour accent or reflective trim effect is wanted on scale subjects. The gloss finish also gives decals and further detailing a clean painted base once the coat has cured. On the workbench, TS-30 suits body panels, fairings, exterior parts and other prepared components that call for a sprayed finish instead of hand brushing. The 100 ml can size fits both single-colour touchups and broader coverage across larger model sections. Use only with the handling care required for an aerosol paint. Warning! Not suitable for children under 14 years.
TS spray colours
TS-4 German-Grey Flat, spray paint, 100 ml
300085004€10.491 l = €104.90
TS-4 German-Grey Flat is a 100 ml spray paint from the TS range, made for plastic model finishing with a muted grey tone and an even aerosol application. The flat surface works especially well where a low-sheen look suits the subject, from military equipment to mechanical details and scale body sections. The paint is identified in the range as TS-4 and belongs to the Spezial-Acryl-Harz-Spray line. Its aerosol can format is designed for broad, consistent coverage on exterior surfaces, making it useful for body panels, housings and shaped parts that benefit from a uniform coat. The 100 ml fill gives enough material for repeated light passes across larger areas while keeping the colour tone consistent from section to section. The German-Grey shade lends itself to subdued finishes, technical components and painted assemblies where a glossy effect would not match the intended look. On the workbench, the spray format helps move quickly from prepared parts to full-colour coverage on plastic assemblies and accessories. It fits painting sessions focused on shells, structural sections or detail groups that need the same flat grey across multiple pieces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-50 Mica Blue Spray Paint, model paint, 100 ml
300085050€10.491 l = €104.90
TS-50 Mica Blue Spray Paint brings a metallic blue tone to model work in a 100 ml aerosol can, combining quick coverage with a semi gloss finish that suits broad body panels and shaped parts. The spray format helps distribute colour in a fine mist, making it easier to cover contours, edges and recessed sections with a more uniform coat than hand brushing. The paint is specified for plastics, which makes it relevant for many model shells and accessory parts used in hobby building. The mica effect gives the blue shade extra visual depth as light moves across the painted surface, so curved fenders, rooflines and body sides show more variation than a flat solid colour. The can label identifies it as a spray paint for adult modelers only, and the aerosol format is paired with handling guidance such as vigorous shaking and application in light coats. The 100 ml fill size also gives enough material for repeated passes across larger sections where a single heavy coat would be less controlled. For finishing work, TS-13 glossy clear coat can be used over TS-50 when a higher-shine result is wanted. That makes the paint useful for model car bodies, exterior panels and other plastic parts where colour consistency and surface character matter in the final presentation. In a workshop setup, the can suits staged painting sessions with drying time between coats and a final clear layer when a brighter gloss is the goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-6 Flat Black, spray paint, 100 ml aerosol
300085006€10.491 l = €104.90
TS-6 Flat Black is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as a special acrylic resin spray. The flat black colour gives plastic model parts a non-gloss surface that suits body sections, panels and detail areas where a muted finish is the goal. The can is labelled for plastics, making it a clear fit for hobby work on compatible model surfaces. As an aerosol, it covers broad areas faster than hand painting and reaches curved shapes with an even mist when applied in controlled passes. The visible handling guidance points to a simple working method: shake the can vigorously, spray in light coats and allow drying between passes. Clearing the nozzle after use helps keep the spray pattern ready for the next session. The 100 ml fill offers enough paint for repeated workshop use across multiple stages of a build or refinishing job. On the bench, TS-6 Flat Black suits body preparation, colour blocking and final surface work on plastic model assemblies. It also fits touch-up tasks where a flat black section needs to match surrounding painted parts with the same low-sheen look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-95 Pure Metallic Red, paint spray, gloss 100 ml
300085095€11.491 l = €114.90
TS-95 Pure Metallic Red is a gloss spray paint for model finishing, supplied in a 100 ml aerosol can and formulated as a synthetic lacquer. The fast-curing formula suits larger model surfaces where an even metallic coat matters, such as car bodies, fairings and broad exterior panels that benefit from a smooth sprayed finish. The colour is identified as Pure Metallic Red, giving bodywork a bright metallic tone that catches light across curves, edges and recessed lines. Because the TS spray formula is not affected by acrylic or enamel paints, the main colour coat can be followed with hand-painted detail work in other paint types once the larger surfaces are covered. That makes it useful for separating the main body colour from smaller trim areas, vents, frames or accent sections without changing the base finish. The aerosol format also helps distribute paint evenly across wide sections that are harder to cover with a brush. On a workbench, one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear reference point for planning multi-body projects or repeat colour use on matching builds. The spray format suits full-body coating first, followed by detail painting once the main shell has cured, keeping the finishing process focused and orderly. Warning! Not suitable for children under 14 years.
TS spray colours
TS-21 Gold Gloss, spray paint, 100 ml aerosol
300085021€10.491 l = €104.90
TS-21 Gold Gloss is a 100 ml spray paint aerosol for model finishing, supplied in a ready-to-use can that applies colour by fine spray across plastic parts. The gloss gold tone suits builds that need a bright metallic surface, whether the aim is a full body colour, accent sections or selected trim areas that stand out under a clear, reflective finish. The paint is identified as a special acrylic resin spray within the TS range, giving model makers a clearly coded colour reference for repeat use on matching parts or later touch-ups. The aerosol format helps cover broad shells, panels and exterior sections more quickly than brush application, especially where an even coat matters across curved surfaces. The can is marked for plastics, which keeps material choice clear when planning a finishing sequence for model kits and separate body components. Visible hazard labelling and handling information on the can underline that this is a workshop material intended for careful hobby use. On the bench, TS-21 fits naturally into painting sessions for scale bodies, accessories and detail sections that call for a metallic gold effect. It works well when a build moves from surface preparation to colour coating, with the 100 ml can size offering enough paint for repeated passes on larger model parts or several smaller sections. Warning! Not suitable for children under 14 years.
TS spray colours
TS-33 Flat Hull-Red, spray paint, 100 ml
300085033€10.491 l = €104.90
TS-33 Flat Hull-Red is a 100 ml spray paint for plastic model parts, built around a special acrylic resin formula and delivered through an aerosol can for broad, even coverage. The flat color finish suits subjects that call for a muted surface rather than shine, whether the goal is a ship hull tone, structural detailing or a weathered painted section on a scale build. The aerosol format helps lay color across larger panels and shaped parts with a steady spray pattern, which is useful on curved shells, molded recesses and edges that are slower to cover by hand. The can is labeled for plastics, making it a focused choice for model kit finishing rather than a general household coating. The TS-33 designation also helps match the shade within an established hobby paint range when a build calls for a specific color reference. As an aerosol paint, the can is classified as extremely flammable and pressurized, and it should be used only with careful handling and good ventilation. On the bench, this spray suits primed assemblies, separate body sections and detail groups that need an even flat red-brown tone across multiple parts. It also works well when a build calls for quick, consistent color application before further detailing, masking or weathering steps are added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-34 Camel Yellow Gloss, spray paint, 100 ml
300085034€10.491 l = €104.90
TS-34 Camel Yellow Gloss is a 100 ml aerosol spray paint for plastic models, built for fast, even colour application on larger surfaces and shaped parts. The gloss yellow shade gives body panels, fairings and exterior sections a bright, solid finish that reads cleanly on display models and working RC builds alike. This TS paint is described as a special acrylic resin spray, combining pigments, binders and solvents in a pressurised can for direct spray use. The can is intended for plastic model work, where broad coverage matters more than brush marks or uneven edges. Applied in light coats from about 25 to 30 cm, the spray pattern helps colour reach curves, corners and recessed sections with a more consistent layer build. The 100 ml fill suits full-body coverage as well as smaller repaint jobs and matching detail sections across a build. On the bench, TS-34 Camel Yellow Gloss fits projects that need a strong yellow body colour, a contrasting accent area or a fresh repaint on worn exterior parts. It works well when several plastic components need the same tone across the whole model, keeping the finish visually coherent from the first pass to the final dried coat. Warning! Not suitable for children under 14 years.
TS spray colours
TS-40 Metallic Black, spray paint, 100 ml
300085040€10.491 l = €104.90
TS-40 Metallic Black brings a dark metallic tone to plastic model surfaces with a semi gloss finish that gives panels and shaped parts a clean, light-catching look. The aerosol format lays colour across broad areas quickly, making it well suited to body shells, exterior panels and other model sections where an even coat matters. This spray paint comes in a 100 ml can and is part of the TS paint range for plastic models. The Metallic Black shade combines a black base with a metallic effect, which helps edges, curves and moulded lines stand out under changing light. On larger surfaces, the spray pattern supports more consistent coverage than hand brushing, especially where recessed contours or rounded forms make brush marks harder to avoid. The semi gloss surface sits between flat and high gloss, giving the finish visible depth without a mirror-like shine. When a brighter final sheen is required, TS-13 glossy clear coat can be applied over the colour layer. In model building sessions, this shade suits vehicle bodies, fairings and accessory parts that call for a darker metallic appearance. It also works well when a build needs contrast between painted exterior sections and smaller detail areas, while the can format keeps application straightforward across repeated coats. Warning! Not suitable for children under 14 years.
TS spray colours
TS-45 Pearl White Gloss, spray paint, 100 ml
300085045€10.491 l = €104.90
TS-45 Pearl White Gloss is a 100 ml TS paint spray made for finishing plastic model surfaces with a bright gloss coat and a pearl effect that catches light across curves, edges and larger exterior sections. The aerosol format suits broad coverage on body shells and other outer parts where an even colour layer matters to the final look. This paint belongs to the TS spray range and is identified as a special acrylic resin spray in the supplied safety data. The can is intended for model painting rather than general household use, and the label states for adult modelers only. Pearl white works especially well on shaped panels where the finish can show subtle changes in tone as light moves across the surface. For the stated colour result, Tamiya recommends using TS-26 Glossy White as the primer beneath TS-45, giving the top coat a lighter base to build on. On the bench, TS-45 suits car bodies, cowlings and other plastic parts that benefit from a smooth sprayed finish instead of hand-painted coverage. Light coats on prepared surfaces help build the final appearance step by step, whether the goal is a clean road-car body, a race livery base or a bright custom colour scheme. Warning! Not suitable for children under 14 years.
TS spray colours
TS-42 Light Gun Metal, spray paint, semi gloss
300085042€10.491 l = €104.90
TS-42 Light Gun Metal is a special acrylic resin spray paint for model finishing, supplied in a 100 ml aerosol can. The semi gloss Light Gun Metal shade gives plastic model surfaces a metallic look with a controlled sheen that avoids the fully flat or mirror-gloss appearance often used for different effects. The aerosol format helps lay down colour across wider panels and shaped exterior sections in a continuous coat, which is useful on body shells, fairings, covers and other visible parts where an even surface matters. As part of the TS paint range, this shade is suited to model painting tasks that call for a darker metallic tone. The can is labelled for plastics, aligning it with common model-building materials used in hobby kits. When a brighter top finish is wanted, the BasicText specifies TS-13 glossy clear coat as the matching overcoat for a glossy surface finish. On the bench, TS-42 fits projects where metallic bodywork, trim sections or equipment housings need a darker gun metal appearance. It also works well in finishing stages where a spray-applied coat is preferred over brush application for smoother coverage across larger visible areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-27 Flat White, spray paint, 100 ml aerosol
300085027€10.491 l = €104.90
TS-27 Flat White is a 100 ml spray paint designed for model finishing, combining a flat white tone with aerosol application for broad, even coverage on plastic surfaces. The special acrylic resin formula is made for hobby use, where smooth colour laydown across shaped parts, larger panels and curved sections helps keep the finish consistent. The can delivers paint as a fine spray rather than a brush-applied coat, which makes it useful for covering shells, body parts and other model components with fewer visible stroke marks. The Flat White shade works well where a matte white surface is needed for clean colour separation, solid coverage or a neutral base before further detailing. As an aerosol paint, it is classified as extremely flammable and as a pressurised container. Use only outdoors or in well-ventilated areas, avoid inhaling spray mist, and protect the can from heat and direct sunlight above 50°C. On the workbench, TS-27 suits builders finishing scale models, refreshing painted sections or preparing parts for additional masking and colour work. The 100 ml fill gives a practical amount for repeated hobby use across multiple painting sessions. Warning! Not suitable for children under 14 years.
TS spray colours
TS-3 Dark Yellow Flat, spray paint, 100 ml
300085003€10.491 l = €104.90
TS-3 Dark Yellow Flat is a 100 ml spray paint for model work that gives plastic surfaces a muted yellow-olive coat with a flat finish. The aerosol format suits broad body sections, curved panels and shaped parts where an even colour layer matters across the whole surface. This special acrylic resin spray is intended for plastics and is applied in light passes, with the can used at a recommended distance of 25 to 30 cm. The flat colour helps avoid a glossy look when a build calls for a subdued military, utility or worn appearance. The can is labelled for adult modelers only, and the paint sits in a pressurised aerosol format. The safety data identifies it as an extremely flammable aerosol, and the container must not be exposed to temperatures above 50°C. Use is stated for well ventilated areas. On the bench, TS-3 suits full body coverage, single-colour base coats and repaint work on plastic model parts. It also fits builds where a matte surface is needed before further finishing steps, letting colour placement stay consistent across larger sections and smaller formed details alike. Warning! Not suitable for children under 14 years.
TS spray colours
TS-48 Gunship Grey Flat, spray paint, 100 ml
300085048€10.491 l = €104.90
TS-48 Gunship Grey Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can for broad, even coverage across larger sections and shaped parts. The Gunship Grey tone and flat finish suit subjects that call for a muted surface, from aircraft panels to military equipment details and mechanical bodywork. This special acrylic resin spray is intended for plastics and gives builders a practical way to cover surfaces that are slower to finish with a brush. The aerosol mist helps reach curves, edges and recessed shaping with a more consistent coat across the same section. The can is labelled TS-48 within the TS paint range, making the shade easy to match when a build calls for a specific colour reference. Hazard pictograms on the can identify it as a flammable aerosol and indicate careful handling during use and storage. On the bench, the 100 ml volume suits repeated work across multiple assemblies, touch-ups on larger model sections, or a full colour stage on a single build. It fits naturally into painting sessions focused on armour, aircraft, sci-fi subjects or utility vehicles where a flat grey finish supports realistic surface character. Warning! Not suitable for children under 14 years.
TS spray colours
TS-79 Semi Gloss Clear, paint spray, 100 ml
300085079€11.491 l = €114.90
TS-79 Semi Gloss Clear is a 100 ml paint spray for model finishing, designed to give larger surfaces a semi gloss clear coat with the speed and coverage of a synthetic lacquer aerosol. The fast-curing formula helps move a build from colour work to final surface treatment without a long wait between stages. This spray is especially useful on broad model areas where a brush can leave visible overlap, such as car bodies, fairings and other shell sections. The semi gloss finish sits between flat and full gloss, making it suitable for builds that need a softer final sheen rather than a high-shine coat. A 100 ml can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a concrete guide for planning workshop stock and multi-build sessions. The formula also supports layered finishing, because enamel and acrylic paints can be added after the overall coating stage for smaller details and accents. On the bench, TS-79 works well as the clear stage after the main colour has been completed and dried. It suits modelers who want consistent coverage across larger panels, then return with finer brush-painted details to complete trim, markings or small visual contrasts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-19 Metallic Blue Spray Paint, Model Finish
300085019€10.491 l = €104.90
TS-19 Metallic Blue brings a metallic blue semi gloss finish to plastic model surfaces in a 100 ml aerosol format, giving shells, body panels and exterior parts a clean, even colour layer with the visual depth that metallic paint adds under light. The TS paint range is formulated as a special acrylic resin spray, making it suited to hobby finishing where smooth colour application matters across shaped surfaces. The aerosol can supports light, repeated passes over larger sections, which helps maintain a more uniform coat on curved panels, fairings and body contours. The metallic pigment gives the blue tone a brighter, reflective character than a flat colour, while the semi gloss finish keeps the surface short of a full high-shine look. For a glossier result, the product data recommends TS-13 glossy clear coat over the colour layer. The can is labelled for plastic model use and carries 100 ml net volume. This paint suits model car bodies, motorcycle fairings and other plastic kit parts that benefit from even spray coverage and a metallic finish. In a hobby workspace, it fits the stage where assembled or prepared parts move into colour finishing, whether covering a full bodyshell or refreshing selected exterior sections with a consistent blue tone. Warning! Not suitable for children under 14 years.
TS spray colours
TS-71 Smoke Transparent Gloss Spray Paint 100ml
300085071€10.491 l = €104.90
TS-71 Smoke Transparent Gloss is a spray paint for model finishing that combines a transparent smoke tone with a gloss surface, making it suited to tinted effects on clear parts and darker visual accents across larger assemblies. The synthetic lacquer formula cures in a short time, so broad surfaces can move on to the next stage without a long wait at the bench. The 100 ml aerosol format is designed for model work where an even coat matters across body shells and other wide sections. One can is stated to cover 2 or 3 car model bodies in 1:24 scale, which gives a practical guide when planning a full paint session. The paint is not affected by acrylic or enamel paints, so different paint types can be used in sequence on the same build. That makes it easier to add smaller colour areas, trim details or highlighted sections after the main smoke coat has been applied and dried. In use, TS-71 suits model car bodies, clear sections and other parts that benefit from a darker transparent finish with gloss depth. It fits neatly into finishing work where the main surface is sprayed first and finer accents are added later with a brush, helping keep large areas smooth while leaving room for precise detail painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-83 Metallic Silver Gloss, paint spray, 100 ml
300085083€24.991 l = €249.90
TS-83 Metallic Silver Gloss is a 100 ml paint spray for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with a smooth metallic coat. On car bodies, broad fenders, roofs and doors can be coated in one consistent colour pass, giving the shell a clean gloss look that suits silver road cars, race liveries and custom builds. The spray format is especially useful when a brush would leave visible strokes across wide panels. One can is stated to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear guide for planning full repaints or multiple shells in the same colour. After the main coat has dried, further detailing can be added with acrylic or enamel paints because the TS lacquer layer is not affected by them. That makes it easier to separate the main body colour from window trim, vents, grilles or other fine painted accents. When used for metallic silver or metallic gold finishes, a glossy black primer underneath is recommended to support the final visual depth of the colour. On the bench, the can suits full-body coating before smaller painted details are picked out by hand. It also fits repeat use across several 1/24 car projects where a consistent metallic silver gloss finish is needed. Warning! Not suitable for children under 14 years.
TS spray colours
TS-86 Brilliant Red, paint spray, 100 ml
300085086€11.491 l = €114.90
TS-86 Brilliant Red is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover larger surfaces with an even colour coat. The bright red shade suits full body shells, broad panels and other parts where a smooth, continuous finish gives the model a clean overall look. The aerosol format is especially useful when a brush would slow down coverage across wide sections. One can contains enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a clear guide for planning a complete paint job. After the main coat has been applied, enamel and acrylic paints can be used for smaller details and picked-out sections because the spray layer is not affected by those paint types. That makes it easier to separate the main body colour from trim lines, lights, frames or other fine accents added later. On the bench, TS-86 Brilliant Red supports a straightforward workflow: broad areas first, then detail painting once the main surface has cured. It fits model projects that need a strong solid red finish across exterior shells, whether the goal is a clean road-car look or a vivid racing style.
TS spray colours
TS-2 Dark Green Flat, spray paint, 100 ml
300085002€10.491 l = €104.90
TS-2 Dark Green Flat is a 100 ml spray paint for plastic model surfaces, combining a deep muted green tone with the quick, even application of an aerosol can. On larger shells, body panels or grouped parts, the flat finish reduces shine and gives painted sections a more scale-like appearance under workshop light. This colour belongs to the TS range of special acrylic resin sprays used in model finishing. The spray format helps cover broad areas more uniformly than hand brushing, which is especially useful on curved panels, body shells and repeated parts that need the same tone across the whole build. The dark green shade suits military subjects, utility vehicles and classic colour layouts where a matte surface supports the visual character of the model. The 100 ml fill offers a practical amount for planned paint sessions on plastic components. On the bench, the can suits builders preparing exterior parts before decals and final detailing, or refreshing a single body section in the same colour family. In hobby use focused on plastic kits and RC bodyshells, TS-2 Dark Green Flat adds a controlled sprayed coat that keeps the finish understated while letting panel lines and shapes remain clear. Warning! Not suitable for children under 14 years.
TS spray colours
TS-41 Coral Blue Gloss, spray paint, 100 ml
300085041€10.491 l = €104.90
TS-41 Coral Blue Gloss is a 100 ml spray paint from the TS range, made for model finishing with a bright gloss colour that reads between coral blue and light turquoise on the cap and can marking. The aerosol format lays colour across larger surfaces quickly, which suits body panels, shells and other shaped parts where an even visual flow matters. The paint is identified in the range as TS-41 and belongs to the acrylic resin spray line shown in the safety data sheet as Spezial-Acryl-Harz-Spray TS-Farben. As a ready-to-spray can, it removes the need to decant or mix colour before use and helps keep coverage consistent across repeated passes on matching parts. The gloss finish gives edges, curves and raised details a cleaner light catch than a flat coat, which can make panel lines and colour blocking read more clearly on completed models. The 100 ml fill also gives enough material for multi-part painting sessions or for carrying the same shade across several sections of one build. On a workbench, TS-41 suits full-colour body coverage, contrasting trim sections or standout accent areas that need a vivid gloss tone. The spray-can format also fits builders who want one coded shade ready for touch-ups, repeat projects or coordinated finishing across separate model components. Warning! Not suitable for children under 14 years.
TS spray colours
TS-53 Deep Metallic Blue, spray paint, 100 ml
300085053€10.491 l = €104.90
TS-53 Deep Metallic Blue brings a rich metallic blue tone to model painting in a 100 ml aerosol can, making it well suited to broad, even colour application on hobby surfaces. The semi gloss finish gives the colour a subtle sheen straight from the can, with metallic particles adding visible depth across curved panels and larger sections. This spray belongs to the TS paint range and is described as a special acrylic resin spray for model use. The aerosol format supports fast coverage on parts where brush marks would interrupt the finish, and it suits projects that need a consistent tone across multiple sections. For a glossier final appearance, TS-13 glossy clear coat can be used over the dried colour layer. The paint is supplied in a pressurised can, and the label identifies it as a flammable aerosol for adult modelers only. It fits naturally into body finishing, colour changes, and restoration work on hobby builds where a deep metallic blue is the target shade. Used in light coats across prepared surfaces, the spray can help create an even visual result on shells, panels, and other larger components that benefit from smooth colour coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-76 Mica Silver, spray paint, 100 ml gloss
300085076€11.491 l = €114.90
TS-76 Mica Silver is a spray paint for model finishing that combines a metallic silver tone with a gloss surface and the fast-curing behaviour of synthetic lacquer. The aerosol format helps cover broad body panels evenly, making it especially useful when a build calls for a uniform coat across larger exterior surfaces. Each can contains 100 ml of paint, and the stated coverage is enough to fully coat 2 to 3 car model bodies in 1/24 scale. That quantity gives clear planning for repeat colour work across more than one shell or for keeping the same finish available for a second body. The paint system also supports layered detailing after the main colour is down. Acrylic and enamel paints can be applied for smaller accents and picked-out sections because they do not affect the TS spray coat. On a car model body, the metallic tone settles best when broad areas such as the roof, bonnet and side sections need a consistent finish. For builders aiming at a higher-shine result, the data recommends TS-13 glossy clear coat as the next step for an even glossier surface. Warning! Not suitable for children under 14 years.
TS spray colours
TS-16 Yellow Gloss, spray paint, 100 ml
300085016€10.491 l = €104.90
TS-16 Yellow Gloss is a 100 ml spray paint for model finishing, supplied in an aerosol can and specified as a special acrylic resin spray. The gloss yellow colour is suited to broad exterior sections where an even coat and consistent surface appearance matter across the whole painted area. The formula is identified for plastics on the can, making it a practical choice for many model bodies and formed parts that benefit from spray application rather than brush painting. Aerosol delivery helps cover larger panels in a continuous pass, which is useful when matching colour across curved shells, body sides or other wide surfaces. The safety data identifies the contents as a pressurised aerosol mixture with binders, pigments and solvents in a propellant pack. The can carries flammable and irritant hazard warnings, and the documentation states storage below 50°C as well as use in well-ventilated areas. On the workbench, TS-16 Yellow Gloss fits painting sessions that focus on clean, full-surface colour application for scale models and hobby parts. It also works well when a bright gloss yellow tone is needed for body sections, accent panels or coordinated finishing across several compatible components. Warning! Not suitable for children under 14 years.
TS spray colours
TS-5 Olive Drab 1, spray paint, 100 ml
300085005€10.491 l = €104.90
TS-5 Olive Drab 1 is a 100 ml spray paint for model finishing, combining a flat surface effect with broad aerosol coverage for clean, even colour on plastic parts. The muted Olive Drab 1 shade suits military subjects and utility equipment, giving panels and shaped sections a restrained, non-gloss appearance that reads convincingly once the coat has settled. This TS paint is identified in the data as a special acrylic resin spray and is presented for plastics, making it a focused choice for model builders working on shells, bodywork, accessories or scenery parts. The aerosol format helps carry colour into recessed lines, curved edges and larger uninterrupted areas where brush marks can interrupt the finish. A 100 ml fill offers enough paint for repeated light coats across multiple sections of a build, which is useful when colour depth needs to be built gradually. The flat character of the finish also supports weathered, service-use or field-applied looks where a reflective surface would not fit the subject. On the bench, TS-5 Olive Drab 1 fits projects that need a uniform base coat before detail painting, decals or further finishing steps. It also works well when separate components such as fuel cans, stowage pieces or exterior panels need the same consistent tone across the whole build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-61 NATO Green Flat, spray paint, 100 ml
300085061€10.491 l = €104.90
TS-61 NATO Green Flat is a 100 ml spray paint for model finishing, supplied in a ready-to-use aerosol can for broad, even coverage on plastic parts. The flat NATO Green tone gives military subjects and other subdued paint schemes a matte surface that reduces visible brush streaks and helps large areas read as one consistent color. This TS paint belongs to the special acrylic resin spray range for model use. The aerosol format is especially useful on body shells, hull sections, armor panels and other shaped components where a brush can leave overlaps at edges and corners. A sprayed coat can settle more evenly across recessed lines, raised details and curved surfaces, which helps preserve the look of molded structure after painting. The 100 ml volume also gives enough material for repeated finishing sessions or for covering multiple assemblies, depending on the size of the parts being painted. On the workbench, the can suits builders who want a fast route to a uniform base color before adding markings, weathering or detail accents. It also fits restoration or touch-up work on existing model projects where a flat military green shade needs to match the rest of the finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-63 NATO Black Flat, spray paint, 100 ml
300085063€10.491 l = €104.90
TS-63 NATO Black Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as part of the TS paint range. The flat black tone suits subdued colour layouts, dark trim sections and military-style paint schemes where a non-gloss surface is needed across larger areas. The formula is described in the product data as a special acrylic resin spray with pigments and solvents in a pressurised can. That aerosol delivery helps lay colour across wide panels, body sections and separate parts with a more uniform coat than hand brushing on the same surfaces. The can is intended for plastics, making it suitable for plastic model components where an even overall colour is the goal. The 100 ml fill offers enough paint for repeated passes on multipart builds, touch-up work on matching sections, or a full colour stage within a larger finishing plan. On the bench, TS-63 can be used for exterior body pieces, armour panels, accessories and other model parts that call for a flat black accent or base tone. It fits builders planning camouflage layouts, dark underlayers or restrained contrast details, and the spray format keeps the painting step focused on coverage, tone consistency and a clean matte look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-66 IJN Grey Flat Kure Arsenal, spray paint
300085066€12.291 l = €122.90
TS-66 IJN Grey Flat Kure Arsenal is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The aerosol format helps cover larger surfaces with a consistent colour layer, whether the work focuses on a car body, a hull section or other broad exterior parts that are harder to coat evenly with a brush. The flat grey tone is named for Kure Arsenal and suits subjects that call for a restrained military finish rather than a gloss surface. Because the cured coat is not affected by acrylic or enamel paints, the main colour can be sprayed first and smaller details can be added later with other paint types. That sequence supports cleaner separation between the base coat and picked-out features. A single can holds enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, giving a clear reference point for planning larger paint jobs. On the bench, TS-66 fits projects where broad panels need fast, even coverage before finer weathering or detail painting begins. It also works well when several matching parts need the same flat grey finish across a build, helping keep the overall colour treatment consistent from the first pass to the final detail stage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-11 Maroon Gloss, spray paint, 100 ml
300085011€10.491 l = €104.90
TS-11 Maroon Gloss brings a deep maroon tone and a gloss surface to plastic model parts in a 100 ml spray can, making it well suited to larger exterior sections where an even finish matters. The aerosol format lays colour across broad areas in a continuous pass, creating a clean visual result on body shells, panels and other shaped surfaces. This special acrylic resin spray is specified for plastics and is intended for hobby finishing work rather than brush detail painting. The label guidance calls for light coats applied from 25 to 30 cm, a method that helps colour build gradually across contours and edges. Shaking the can vigorously before use supports an even mix in the spray. After painting, clearing the nozzle with a brief upside-down spray helps keep the can ready for the next session. The gloss maroon shade suits projects that call for a rich, polished body colour. On the bench, the can fits painting stages where separate parts are prepared, coated and left to dry between passes. Use in well ventilated areas is required, and the aerosol should be kept away from heat and open flames during handling and storage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-23 Light Blue Gloss, spray paint, 100 ml
300085023€10.991 l = €109.90
TS-23 Light Blue Gloss brings a clean, glossy light blue finish to plastic model work in a 100 ml aerosol can. The spray format suits broad surfaces and shaped parts alike, so body shells, fairings and exterior panels can take colour with a smooth visual flow instead of visible brush marks. This TS paint is identified in the data as a special acrylic resin spray for model use. The can is intended for plastics, making it a practical choice when a project calls for an even colour layer across curved sections, edges and recessed contours. A gloss finish gives the painted surface a brighter, more reflective look than a flat coat, which helps light catch on body lines and molded details. The 100 ml fill also gives useful coverage for larger model sections or for several matching parts within one build. On the bench, the aerosol can supports light, repeated passes across prepared components, whether the goal is a full exterior colour, a coordinated accent on selected panels or a fresh finish for replacement parts. In model car, bike, aircraft or similar hobby projects, the light blue shade stands out clearly while keeping the surface look crisp and uniform. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
TS spray colours
TS-25 Pink Gloss, spray paint, 100 ml aerosol
300085025€10.491 l = €104.90
TS-25 Pink Gloss brings a bright glossy pink tone to model painting in a 100 ml aerosol format that is easy to apply across larger surfaces. The special acrylic resin spray is intended for plastics, making it a practical choice for scale model bodies and shaped parts where an even colour coat matters. The spray format helps cover curved panels, recessed sections and broad outer surfaces more quickly than hand brushing, especially when a uniform gloss look is the goal. Within the TS paint range, TS-25 serves as a distinct colour option for custom schemes, bold accent areas and full exterior coating plans. The can is labelled as an aerosol model paint and carries a net volume of 100 ml. The material information identifies it as a paint mixture with binders, pigments and solvents in a pressurised can. On the workbench, TS-25 Pink Gloss suits builders finishing plastic car bodies, fairings or detail panels that call for a vivid polished colour impression. It also fits repainting tasks, touch-up stages and coordinated multi-colour model projects where a spray-applied gloss pink shade needs to sit cleanly alongside other planned tones. Warning! Not suitable for children under 14 years.
TS spray colours
TS-32 Haze Grey Flat, spray paint, 100 ml
300085032€10.491 l = €104.90
TS-32 Haze Grey Flat brings a muted grey tone and a matte surface to plastic model work in a 100 ml aerosol can. The spray format helps cover larger sections evenly, whether the task is a body shell, exterior panel or accessory part that needs a uniform colour without visible brush texture. This TS paint is identified as a special acrylic resin spray and is made for plastics, making it a practical match for scale model finishing. Light coats can be built up gradually, and the can is intended to be shaken vigorously before use for an even spray pattern. The visible usage guidance recommends a spraying distance of 25 to 30 cm and allowing drying time between coats, which helps maintain a clean surface on detailed parts. The flat Haze Grey shade works well where a non-gloss appearance suits military, industrial or understated road-car styling on model subjects. On the bench, the aerosol can suits builders who want quick colour coverage across multiple parts in one session. It also fits touch-up or finishing work on plastic assemblies where a consistent matte grey helps separate body sections, trim pieces or add-on details from glossier painted areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-36 Fluorescent Red Gloss, spray paint, 100 ml
300085036€11.491 l = €114.90
TS-36 Fluorescent Red Gloss brings a vivid, high-visibility colour tone to model finishing in a 100 ml aerosol can, pairing a bright gloss surface with the fast coverage that spray application gives on larger plastic parts. On a bodyshell, fairing or exterior panel, the colour reads boldly and catches the eye under display lighting or out on a running model. This paint belongs to the TS range of special acrylic resin sprays for hobby use. The aerosol format helps lay colour across curved sections, panel contours and wider areas with a more uniform pass than hand brushing on the same surfaces. Fluorescent red suits standout liveries, accent sections and custom paint schemes where a strong visual contrast matters. The can shown for plastics aligns with common model-finishing tasks such as coating exterior shells and formed parts. As an aerosol, this paint should be handled with care and used in well-ventilated conditions. On the bench, TS-36 fits projects that need a bright gloss statement colour, from competition-inspired bodywork to display models with bold trim and panel sections. The 100 ml volume also supports layered application across several sessions when a finish calls for multiple light coats rather than one heavy pass. Warning! Not suitable for children under 14 years.
TS spray colours
TS-44 Brillant Blue Gloss, spray paint, 100 ml
300085044€10.491 l = €104.90
TS-44 Brillant Blue Gloss brings a vivid blue gloss finish to plastic model surfaces in a 100 ml aerosol can. The ready-to-spray format suits larger sections where an even colour layer matters, such as bodyshells, fairings or broad exterior panels on scale builds. The TS paint range is described as a special acrylic resin spray, with pigments, binders and solvents in a pressurised can. That composition is built for direct spray application rather than brush work, making it useful when a project calls for continuous colour across curved or recessed shapes. The can is labelled for plastics, which makes it relevant for many model kits and RC bodyshell projects that use formed synthetic parts. The gloss finish adds a reflective surface character to the Brillant Blue shade instead of a flat or satin look. On the bench, TS-44 fits painting stages where a single, consistent colour coat defines the outer appearance of the build. The 100 ml fill gives practical volume for one or more model painting sessions, depending on the size and number of parts being coated. As an aerosol paint, it should be handled according to the stated precautions and used only outdoors or in well-ventilated areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-46 Light Sand Flat Spray Paint, 100 ml Can
300085046€10.491 l = €104.90
TS-46 Light Sand Flat is a 100 ml acrylic resin spray paint for model finishing, combining a muted sand tone with the speed and reach of an aerosol can. The flat finish gives painted parts a dry, low-sheen surface that suits military subjects, desert vehicles and weathered details on larger sections where brush marks would interrupt the look. This TS paint is supplied as a ready-to-spray aerosol, so coverage is applied directly from the can rather than mixed for airbrush use. The safety data identifies it as an extremely flammable aerosol in a pressurised container, with hazard labelling for skin and eye irritation and for respiratory effects, so use belongs outdoors or in a well-ventilated area. The visible can format also keeps the colour code TS-46 easy to identify on the workbench when several shades are in rotation during a paint session. On armour builds, field equipment, scenery parts or body details, Light Sand Flat works where a subdued earth tone is needed across wider surfaces and repeated shapes. The 100 ml fill supports multiple passes on model components, touch-up stages between coats, or keeping one dedicated shade on hand for ongoing finishing work. Warning! Not suitable for children under 14 years.
TS spray colours
TS-52 Candy Lime Green Spray Paint, 100 ml
300085052€10.491 l = €104.90
TS-52 Candy Lime Green brings a bright coated finish to model work with a 100 ml aerosol format that covers larger surfaces quickly and evenly. The semi gloss colour sits between a flatter painted look and a full shine, giving body sections, panels and shaped parts a clean, vivid presence straight after spraying. This TS paint is identified as a special acrylic resin spray and is intended for model finishing use. The aerosol format helps lay colour across contours, edges and broader sections in one continuous pass, which is especially useful when a brush would leave visible strokes on the surface. The can is marked for plastics, making it suited to many common model parts where an even coat and consistent colour matter. When a higher-shine result is wanted, TS-13 glossy clear coat 300085013 can be applied over the colour layer to change the final surface appearance. The 100 ml fill works well for hobby benches where single-colour coverage is needed for shells, panels or accessory parts in a matching shade. Candy Lime Green stands out on display pieces, custom builds and restoration work where a strong green tone helps define the finished look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-64 Dark Mica Blue Gloss, paint spray, 100 ml
300085064€10.491 l = €104.90
TS-64 Dark Mica Blue Gloss is a 100 ml spray paint for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with a consistent coat. The dark mica blue gloss colour gives car bodies a rich metallic look that stands out under light and suits both factory-style finishes and custom paint schemes. The aerosol format is especially useful when a build calls for broad, smooth colour coverage across body panels, roofs and curved sections that are harder to finish evenly with a brush. Tamiya states that one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a practical guide for planning paint use before a project starts. After the main coat has been applied, acrylic and enamel paints can be used for smaller details because the TS lacquer layer is not affected by them. That makes it easier to separate the main body colour from trim, lights, frames or other picked-out areas during the finishing stage. On the bench, this paint suits full-body colour work on car models where a smooth gloss surface and even metallic tone matter. It also fits multi-step finishing routines in which the main shell is sprayed first and detail painting follows once the body colour has cured. Warning! Not suitable for children under 14 years.
TS spray colours
TS-68 Wooden Deck-Tan, spray paint, 100 ml
300085068€12.291 l = €122.90
TS-68 Wooden Deck-Tan Li.Brown Fla. is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and suits broad surfaces that are awkward to cover with a brush. The aerosol format helps lay down an even coat across larger body panels and deck sections, giving scale builds a consistent base colour with fewer passes. This TS paint is designed so later detail work can follow with enamel and acrylic paints, allowing trim, panel accents or small fittings to be picked out after the main colour has dried. The can carries the TS-68 code on the cap for quick shade recognition during a session, and the cap colour gives a direct visual cue for the Wooden Deck-Tan Li.Brown Fla. tone. A 100 ml fill provides a useful planning benchmark, with enough paint to fully cover 2 or 3 car model bodies in 1/24 scale. The paint is intended for adult modelers only. On car bodies, ship deck sections or other large model parts, the spray format supports steady coverage across wide areas where brush marks would interrupt the finish. It fits naturally into multi-step paint work, where a full base coat comes first and smaller accents follow with other paint types once the main surface is complete. Warning! Not suitable for children under 14 years.
TS spray colours
TS-69 Linoleum Deck Brown Flat, spray paint, 100 ml
300085069€12.291 l = €122.90
TS-69 Linoleum Deck Brown Flat is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The spray application suits broad surfaces where an even, uninterrupted colour layer matters, such as deck areas, body panels and other larger sections that benefit from full coverage. After the main coat is applied, enamel and acrylic paints can be used for added details, panel accents or picked-out sections because the spray layer is not affected by those paint types. That makes TS-69 useful for staged finishing work where the base colour goes on first and smaller features follow later with a brush. The flat Linoleum Deck Brown tone gives a muted, non-gloss appearance that fits scale subjects calling for a restrained surface finish rather than a reflective coat. A single can contains 100 ml of paint, with coverage stated for 2 or 3 1/24 scale car model bodies. This gives a practical reference point when planning a full repaint, a fresh body shell, or several matching sections in one session. Used in light coats across larger areas, the spray format supports clean, consistent results on model builds that need broad colour coverage and follow-up detail painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-84 Metallic Gold Gloss, spray paint, 100 ml
300085084€24.991 l = €249.90
TS-84 Metallic Gold Gloss is a spray paint for model finishing that combines a metallic gold tone with a glossy surface in a 100 ml aerosol can. The synthetic lacquer formula cures in a short time, which helps move larger painting stages along when body shells, panels or other broad parts need an even coat. The paint is described for large model surfaces, where a spray pattern can cover wide areas more efficiently than brush application. One can is stated as enough to fully cover 2 or 3 car model bodies in 1/24 scale, giving a concrete reference point for planning a full build or a repaint project. The formula is not affected by acrylic or enamel paints, so detail colours can be added after the main coat has been applied and cured. For work with TS-83 Metallic Silver and TS-84 Metallic Gold, the stated recommendation is a base of TS-14 Glossy Black primer. On the bench, this makes TS-84 a strong choice for full body painting, matching separate detail stages to a metallic main colour without changing paint systems mid-build. It suits car bodies, exterior panels and other larger parts where a uniform metallic gloss matters as much as colour depth. The 100 ml format also keeps the paint quantity clear when planning materials for one shell or several 1/24 scale bodies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-87 Titanium Gold, paint spray, 100 ml
300085087€12.991 l = €129.90
TS-87 Titanium Gold is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps lay down an even coat across broad surfaces. The metallic Titanium Gold tone gives body shells and larger panels a strong, clean colour presence that suits full exterior coverage rather than detail-only touchups. The spray format is especially useful when a build includes wide curved sections, long side panels or roof areas that benefit from a continuous coat. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a practical reference point before starting a project. The lacquer layer also supports multi-stage finishing, because acrylic and enamel paints can be applied afterwards for smaller painted details. That makes it easier to separate the main body colour from trim, vents, frames or other picked-out sections once the larger surfaces are complete. On the bench, TS-87 suits full-body colour work on car models, custom repaint projects and refresh jobs on existing shells. It also fits display-focused builds where a metallic gold finish helps shaped lines and panel transitions stand out under room light or cabinet lighting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-9 British-Green Gloss, spray paint, 100 ml
300085009€10.491 l = €104.90
TS-9 British-Green Gloss is a 100 ml spray paint for model finishing, combining a deep British-Green shade with a gloss surface that gives shells and parts a clean, uniform colour coat. The aerosol format helps lay colour across broader areas in a continuous pass, which is especially useful when a build calls for an even visual finish rather than visible brush marks. The paint is identified in the technical data as a special acrylic resin spray. That composition supports use in hobby painting where consistent surface coverage matters across shaped panels, edges and curved sections. The can is marked TS-9, so the colour stays easy to match within an established paint range when touch-ups or repeat builds are planned. The net content is 100 ml, a practical size for keeping a dedicated shade on hand for bodywork, accessories or other model parts that need the same gloss green tone. This spray suits finishing sessions at the workbench, whether the goal is coating a single body shell or adding a defined colour accent to selected sections of a model. Because it is an aerosol, painting should be carried out in well ventilated conditions with attention to the handling guidance on the can. Warning! Not suitable for children under 14 years.
TS spray colours
TS-97 Pearl Yellow gloss, paint spray, 100 ml
300085097€11.491 l = €114.90
TS-97 Pearl Yellow gloss is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and lays down an even coat across large surfaces. On car bodies, broad bonnets, roofs and side panels can be covered in one continuous colour pass, giving the shell a bright gloss finish with a pearl effect. The spray format is especially suited to full-body painting where brush application would leave a less uniform result across wide panels. A single can is stated to cover 2 or 3 car model bodies in 1/24 scale, which gives a practical guide for planning a complete paint session. After the main colour has dried, smaller trim areas and picked-out details can still be worked in with acrylic or enamel paints. That compatibility supports layered finishing on grilles, window surrounds, mirrors or other accent areas without disturbing the base coat. On the bench, TS-97 suits builders preparing a fresh bodyshell or refinishing a display model that needs a vivid yellow tone with added pearl depth. It also fits multi-stage paintwork where the main body colour is sprayed first and the finer visual details are completed afterward with separate paint types. Warning! Not suitable for children under 14 years.
TS spray colours
TS-1 Red Brown Flat, paint spray, 100 ml
300085001€10.491 l = €104.90
TS-1 Red Brown Flat is a 100 ml paint spray for model work that gives broad surfaces a smooth, even coat with a flat finish. The synthetic lacquer formula cures in a short time, which helps keep painting sessions moving when body shells, panels or other larger sections need full coverage in one colour. The spray format is especially useful on wide model surfaces where brush marks would interrupt the finish. TS spray paints are not affected by acrylic or enamel paints, so the main colour layer can be followed by hand-painted trim, cockpit details or small exterior accents in a separate step. The red brown flat shade brings a muted, non-gloss look that suits military tones, aged bodywork and subdued custom colour schemes. On 1/24 scale car bodies, one can provides enough paint to fully cover 2 or 3 bodies, which also makes it practical for matching replacement shells or repainting several parts in the same tone. At the workbench, the can supports fast base-coating before detail painting begins. It also fits neatly into longer build projects where bodywork, accessories and touch-up stages are handled in sequence with one consistent colour reference. Warning! Not suitable for children under 14 years.
TS spray colours
TS-101 Base White, paint spray, gloss undercoat
300085101€11.991 l = €119.90
TS-101 Base White is a 100 ml paint spray developed as a gloss white undercoat for model finishing work. When light colours need to go over dark surfaces, this dense white base helps prevent the darker substrate from shifting the final shade, so the topcoat reads cleaner and closer to its intended tone. The formula is described as a special acrylic resin spray paint, delivered in an aerosol can for direct application. Its role is not to replace the final colour, but to prepare the surface beneath it with a solid white layer that supports clearer colour development above. This makes it especially useful before applying lighter gloss shades, where dark material underneath can otherwise dull the result. The long description states that only minimal layers are needed to create this base, which helps keep the preparation stage focused on coverage rather than heavy buildup. On model parts in dark moulded colours, TS-101 can be used as the first paint stage before the chosen gloss topcoat follows. It fits painting sessions where body panels, accessories or other components need a bright, even foundation so the final finish appears more lustrous and visually consistent. Warning! Not suitable for children under 14 years.
TS spray colours
TS-18 Metallic Red, spray paint, 100 ml
300085018€10.491 l = €104.90
TS-18 Metallic Red is a spray paint for model finishing that brings a vivid metallic tone to plastic surfaces in a semi gloss finish. The aerosol format lays colour across larger sections quickly, making it useful for body panels, exterior shells and separate detail parts where an even coat matters. The can contains 100 ml and is part of the TS paint range described as a special acrylic resin spray. That paint type suits model work where shaped parts, edges and recessed lines need full coverage without heavy brush texture. Metallic Red gives the surface a brighter, light-catching look than a flat colour, while the semi gloss sheen keeps the finish controlled rather than mirror bright. When a higher shine is wanted, TS-13 glossy clear coat 300085013 can be applied over the colour layer for a glossier final surface. This paint fits finishing sessions where plastic components are prepared, coated in light passes and left with a uniform metallic appearance across matching parts. It also works well for refresh projects, custom colour schemes and replacement panels that need to match the same TS-18 shade across the build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-35 Park Green Gloss, spray paint, 100 ml
300085035€10.491 l = €104.90
TS-35 Park Green Gloss is a 100 ml spray paint for plastic model work, combining a solid green shade with a glossy finish that reads clearly on body panels, fairings and exterior parts. The aerosol format helps cover broad surfaces quickly, so larger shells and shaped sections can take on an even colour coat with fewer visible brush marks. This TS colour belongs to Tamiya's special acrylic resin spray range for plastics. The paint is supplied in a pressurised can and is identified as TS-35 Park Green Gloss, making it easy to match within an established hobby colour system when a build calls for a specific green tone. The gloss finish reflects light across curves, edges and raised details, which helps shaped surfaces show their lines after painting. On custom projects, the colour can be used for full-body coverage or for selected exterior sections that need a strong, clean contrast against other painted parts. Used on scale model shells and components, the spray format suits sessions where smooth passes across the surface matter as much as the final shade. The 100 ml fill offers a practical amount for regular bench use, whether the task is refreshing a single body panel, coating a full shell or adding a crisp green accent to a detailed build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-49 Bright Red Gloss, spray paint, 100 ml
300085049€10.491 l = €104.90
TS-49 Bright Red Gloss brings a strong, glossy red tone to plastic model work in a ready-to-use 100 ml aerosol can. The spray format suits broad body panels, curved shells and separate trim parts, creating a clean colour layer that gives model surfaces a vivid, uniform appearance. This Tamiya Color paint is identified as a spray for plastics and belongs to the TS paint range for model finishing. The acrylic resin spray formula is supplied in a pressurised can, so colour can be applied directly without mixing in the can itself. The Bright Red Gloss shade works well where a solid, high-visibility red is needed across exterior sections, and the gloss finish helps body lines and shaped contours read clearly once coated. The can size also makes it practical for keeping one dedicated colour on hand for repeat touch-ups or matching multiple parts within the same build. On the bench, TS-49 suits model car bodies, fairings, panels and other plastic components that call for an even red topcoat. It also fits projects where separate pieces need the same colour across the full build, helping maintain a consistent finish from the main shell to smaller exterior details. Warning! Not suitable for children under 14 years.
TS spray colours
TS-65 Pearl Clear Gloss, spray paint, 100 ml
300085065€12.291 l = €122.90
TS-65 Pearl Clear Gloss is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover large surfaces with an even coat. On car bodies, fairings and other broad sections, the aerosol application supports a smooth gloss look with less interruption than hand brushing across the same area. The formula is especially useful when a build needs a clear finishing layer over larger plastic parts. The can is sized to cover 2 or 3 car model bodies in 1/24 scale, which gives a practical reference point when planning one full build or several smaller painting sessions. After the main spray coat has dried, enamel and acrylic paints can still be used for detail work because they are not affected by the TS spray layer. That makes it easier to separate broad surface coverage from later trim painting, badge work or small accent areas that need a brush. In a model workshop, TS-65 Pearl Clear Gloss fits naturally into body finishing stages where a uniform sheen matters across roofs, bonnets, doors or rear sections. It also suits projects that combine spray coverage for the main shell with hand-painted details once the larger surfaces are complete. Warning! Not suitable for children under 14 years.
TS spray colours
TS-7 Racing White Gloss Spray Paint, 100 ml
300085007€10.491 l = €104.90
TS-7 Racing White Gloss brings a bright gloss white tone to model finishing in a spray-can format built for broad, even application. The 100 ml aerosol format suits hobby benches where clean colour coverage across plastic parts, body panels and shaped surfaces matters as much as the final shade. This paint belongs to the TS range of special acrylic resin sprays and is intended for adult modelers. The can is marked for plastics, making it a focused choice for plastic model kits and similar hobby assemblies. Aerosol delivery helps lay colour across wider sections without brush marks, which is especially useful on curved shells, fairings and larger exterior panels. Racing White Gloss also works where a uniform sheen is needed to match motorsport-inspired liveries, clean bodywork or high-contrast trim areas. The compact can size fits neatly into regular workshop storage while still offering enough paint for focused finishing tasks. On the bench, TS-7 suits projects that need a crisp white base coat, a full gloss body colour or careful repainting of selected sections. It also fits builders who keep a dedicated shade ready for repairs, replacement parts or fresh exterior detailing on plastic models. Warning! Not suitable for children under 14 years.
TS spray colours
TS-70 Olive Drab Flat, paint spray, 100 ml
300085070€10.491 l = €104.90
TS-70 Olive Drab Flat is a 100 ml paint spray for model work that combines fast-curing synthetic lacquer with broad, even coverage on larger surfaces. The aerosol format helps lay down a uniform olive drab flat coat across body shells, panels and other wide sections where brush marks would interrupt the finish. The paint is intended for model surfaces and is especially useful when a build needs one consistent base colour before smaller accents are added. Its synthetic lacquer formula dries in a short time, which keeps painting stages moving and helps the next finishing steps follow sooner. The flat olive drab tone suits military, utility and scale subjects that call for a muted, non-gloss appearance. A single can contains 100 ml of paint, and that volume is enough to fully cover 2 or 3 car model bodies in 1/24 scale. Once the main coat is in place and dry, enamel and acrylic paints can be applied for detail work, trim lines and smaller picked-out sections. This makes the spray a strong fit for model benches where larger body parts need quick, even colour before hand-painted finishing begins. It also supports projects that combine a sprayed base coat with later brush-painted details, keeping the main surface and the fine accents in separate, workable stages. Warning! Not suitable for children under 14 years.
TS spray colours
TS-72 Clear Blue Gloss, spray paint, 100 ml
300085072€10.491 l = €104.90
TS-72 Clear Blue Gloss brings a transparent blue tone and glossy finish to larger model surfaces in an aerosol format that is built for broad, even coverage. The synthetic lacquer formula cures in a short period of time, which helps keep painting work moving when body panels, shells or other wide sections need a uniform coat. This spray paint comes in a 100 ml can and is positioned for model finishing rather than brush application on small details. The lacquer layer is not affected by acrylic or enamel paints, so detail work can be added after the main color coat has been applied across the assembly. That sequence suits projects where window surrounds, trim lines or other fine accents are painted in separate stages. The stated coverage is enough to fully cover 2 or 3 car model bodies in 1/24 scale, giving a concrete guide for planning material use before a build reaches the paint bench. On a car bodyshell, the clear blue gloss can be used to establish the main visual effect first, then followed with enamel or acrylic touches once the larger areas are finished. It also fits hobby workflows that focus on smooth coverage across curved panels and other broad exterior sections where an aerosol coat is more efficient than hand painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-74 Clear Red Gloss, paint spray, 100 ml
300085074€10.491 l = €104.90
TS-74 Clear Red Gloss is a 100 ml paint spray for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with an even coat. The clear red gloss tone suits builds that need a transparent colour layer with shine, whether on body sections, light areas or selected trim where a deeper red effect is wanted. The aerosol format is especially useful when broad panels need smooth, continuous coverage that is harder to achieve with a brush on wide surfaces. One can is stated to cover 2 or 3 car model bodies in 1:24 scale, giving a concrete guide for full-body painting work. The TS paint layer also supports staged finishing, because enamel and acrylic paints can be added after the main coat to pick out smaller details. That makes the spray suitable for builders who separate the main body colour from trim, frames or fine accents during the final paint process. On the bench, the can supports fast coating of shells and body parts before detail colours are added in later steps. For display models, race cars or road car builds in 1:24 scale, TS-74 Clear Red Gloss brings a bright transparent finish that reads cleanly across larger shaped surfaces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-75 Champagne Gold, paint spray, 100 ml
300085075€11.491 l = €114.90
TS-75 Champagne Gold is a 100 ml paint spray for model finishing, combining a metallic gold tone with the fast-curing behaviour of synthetic lacquer. The aerosol format helps lay down colour across broad body sections in an even coat, so larger surfaces can be covered with fewer interruptions during painting. This spray is especially useful on model bodies and other wide exterior parts where brush application would leave a less uniform result. A single can contains enough paint to fully cover 2 to 3 car bodies in 1/24 scale, which gives a practical benchmark when planning a build or a repaint. The lacquer layer also works well in mixed paint workflows because acrylic and enamel paints can be applied afterward for smaller details and picked-out trim. For a glossier surface finish, TS-13 glossy clear coat can be used over the colour coat. On the bench, TS-75 suits full-body colour application, touch-up work on larger panels, and coordinated finishing across several scale car projects. The Champagne Gold shade brings a crisp metallic look to body shells, while the spray format supports steady coverage on roofs, doors, bonnets and other shaped surfaces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-81 British Navy Grey, spray paint, 100 ml
300085081€12.291 l = €122.90
TS-81 British Navy Grey is a 100 ml spray paint developed for model finishing, with a synthetic lacquer formula that cures in a short period of time and helps cover larger surfaces with a smooth, even colour pass. The aerosol format suits broad areas that are harder to finish evenly with a brush, such as body shells, hull panels or other wide exterior sections on scale builds. The colour reference is British Navy Grey, giving a specific muted grey tone for projects that call for a controlled, technical finish rather than a bright accent. Tamiya TS spray paints are described as not being affected by acrylic or enamel paints, which supports a layered workflow once the main colour has been applied across the assembly. That makes it easier to return to vents, trim lines, fittings or other small sections with a finer brush-painted finish. A single can contains 100 ml of paint, and the stated coverage is enough to fully cover 2 or 3 car model bodies in 1/24 scale. On the bench, this makes TS-81 useful for full-body colour coats, larger subassemblies and projects where an even grey base is needed before smaller painted details are added. It also fits repainting sessions where several matching parts need the same tone across one build or across multiple 1/24 scale bodies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-88 Titanium Silver, spray paint, 100 ml
300085088€12.991 l = €129.90
TS-88 Titanium Silver is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The aerosol format helps cover larger surfaces with an even coat, making it well suited to car bodyshells and other broad sections where brush painting can leave a less uniform finish. The colour is Titanium Silver, giving model builds a metallic tone that suits bodywork, exterior panels and other visible areas that benefit from a consistent sprayed finish. The paint is described as especially useful for large model surfaces, which makes it a practical choice when a build calls for full-body coverage rather than small touch-up work. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, offering a concrete guide for planning paint use across multiple projects or repeat coats where needed. Once the main sprayed coat has cured, further finishing work can continue with enamel and acrylic paints for picked-out details. That compatibility supports layered paintwork on grilles, trim, frames and other smaller sections after the main colour has been laid down, keeping the broad sprayed base and the finer hand-painted accents in the same workflow. Warning! Not suitable for children under 14 years.
TS spray colours
TS-89 Pearl Blue, paint spray, 100 ml aerosol
300085089€11.991 l = €119.90
TS-89 Pearl Blue is a 100 ml paint spray for model finishing, supplied in an aerosol can and formulated as part of the TS-Paint Spray range. The Pearl Blue colour is intended for smooth, even application on model surfaces, with a semi gloss finish that gives painted parts a clear, controlled sheen straight after the colour coat. The acrylic resin spray format helps cover broad areas and shaped sections with a uniform layer, which is especially useful on body shells, fairings and other curved components where brush marks would interrupt the finish. In the source data, this colour is noted for recreating the distinctive blue finish used on the 1/20 Scale Red Bull RB6 model. That makes TS-89 a focused choice when a specific motorsport shade matters, while still serving general model painting tasks that call for a pearl blue tone. For a glossier surface finish, TS-13 glossy clear coat can be applied over the painted surface. On the bench, the 100 ml can size suits planned paint sessions where several passes are needed to build colour evenly. It fits naturally into model projects that move from surface preparation to colour coating and final finishing, especially when a clean sprayed look is the goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-94 Metallic Gray, paint spray, gloss 100 ml
300085094€11.491 l = €114.90
TS-94 Metallic Gray is a gloss paint spray for plastic models that brings a clean metallic finish to larger painted sections. The 100 ml can is sized for broad coverage and is stated to fully cover 2 or 3 car bodies in 1:24 scale, making it a practical choice for complete body shells and other wide exterior parts. The formula is a synthetic lacquer that cures in a short period of time, which helps keep multi-stage paintwork moving at a steady pace. Its spray application is especially useful on large surfaces where an even coat matters across the whole panel. After the main colour has been applied and cured, enamel and acrylic paints can be used to add smaller details and contrast areas. That compatibility supports layered finishing work, with the metallic base laid down first and finer accents added later where the model calls for them. On a car body, TS-94 Metallic Gray suits full exterior coverage before window frames, trim lines or other small sections are picked out separately. It also fits bench sessions focused on repainting larger assemblies, where a gloss metallic tone and fast-curing lacquer help move the work from masking to detailing with fewer interruptions. Warning! Not suitable for children under 14 years.
TS spray colours
TS-96 Fluorescent Orange, spray paint, gloss 100 ml
300085096€12.991 l = €129.90
TS-96 Fluorescent Orange is a gloss spray paint designed for model finishing, with a synthetic lacquer formula that cures in a short time and lays down colour efficiently across large surfaces. The 100 ml aerosol format suits broad body sections where an even coat and strong visual impact matter, such as car shells, fairings or other large exterior panels. The TS formula is especially useful when a build combines several paint types. After the main coat has dried, acrylic or enamel paints can be used to pick out smaller details because the spray layer is not affected by those paint types. That makes the can a practical choice for staged finishing work, where the main body colour goes on first and trim, markings or fine accents follow later. The fluorescent orange tone gives competition-inspired builds a vivid, high-contrast look, while the gloss finish helps the colour read cleanly across curved surfaces and panel lines. One can contains enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a clear guide for planning material use before painting begins. On the bench, that supports anything from a single full-body respray to several coordinated shells in the same colour family, with room to add hand-painted detail once the main coat has cured. Warning! Not suitable for children under 14 years.
TS spray colours
TS-98 Pure Orange Gloss, spray paint, 100 ml
300085098€11.491 l = €114.90
TS-98 Pure Orange Gloss is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and lays down colour across large surfaces with efficient coverage. On car bodies, fairings or other broad shell sections, the gloss orange tone creates a bold, even finish that reads clearly across curves, edges and panel shapes. The formula is especially useful when a brush would leave visible overlap on wider areas. One can is stated to fully cover 2 or 3 car model bodies in 1:24 scale, which gives a practical guide for planning a full paint session before detail work begins. After the main coat has been applied, enamel and acrylic paints can be used to pick out trim, accents and smaller painted sections without affecting the spray layer. That sequence supports clean separation between the base colour and later hand-painted details. On the bench, TS-98 suits full-body colour work where speed and an even gloss surface matter more than piecemeal brushing. It also fits projects that combine a sprayed main coat with follow-up accent painting, whether the goal is a road car body, a race livery base or another model with broad exterior panels. Warning! Not suitable for children under 14 years.
TS spray colours
TS-10 French Blue Gloss, spray paint, 100 ml
300085010€10.491 l = €104.90
TS-10 French Blue Gloss is a spray paint for plastic models that brings a strong blue tone and a glossy surface finish to visible parts. The 100 ml can suits painting sessions where broad, even colour coverage matters, whether the focus is a body shell, a fairing or exterior trim on a scale build. This TS series paint is identified in the safety data as a special acrylic resin spray with pigments and solvents in a pressurised aerosol can. The spray format helps lay colour across curved panels, recessed sections and longer edges in one continuous pass, which is useful when separate brush marks would interrupt the finish. The cap shows the colour family clearly for quick selection at the workbench. The can is labelled for plastic model use, keeping the application focused on model making rather than general household painting. On the bench, TS-10 French Blue Gloss fits finishing work where a bright solid colour defines the look of the build, from race-inspired bodywork to accent panels on display models. The compact 100 ml size also makes it easy to keep several shades in a paint setup for different liveries, touch-up work or matching smaller detail sections to the main exterior colour. Warning! Not suitable for children under 14 years.
TS spray colours
TS-100 Semi Gloss Bright Gun Metal Spray 100ml
300085100€11.491 l = €114.90
TS-100 Semi Gloss Bright Gun Metal brings a metallic semi-gloss finish to scale model painting, closely matching the shade used on the 1/24 scale Mercedes-AMG GT3 static model. The aerosol can delivers the colour in a ready-to-spray format, so broad body sections, trim pieces and selected detail areas can be coated with one consistent tone. This special acrylic resin spray is designed for modelling use and comes in a 100 ml can, giving enough paint for focused finishing work across multiple parts. The bright gun metal tone sits between a flat industrial grey and a high-shine metallic, which helps it suit body accents, vents, grilles and mechanical-looking sections where a softer sheen reads more to scale. Because the paint is supplied as an aerosol, application can be built up in light coats over curved panels and recessed shapes without switching to a brush-loaded finish. On the bench, TS-100 works well when a model calls for a darker metallic contrast against brighter body colours or clear-coated surfaces. It also suits custom projects beyond the Mercedes-AMG GT3 reference, where the same semi-gloss gun metal effect can tie together exterior details and selected components in a unified finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-102 Cobalt Green Gloss, spray paint, 100 ml
300085102€11.491 l = €114.90
TS-102 Cobalt Green Gloss brings a bold, glossy colour coat to model finishing with a 100 ml spray can sized for practical workshop use. The cobalt green tone gives shells, panels and formed parts a clear solid colour that reads strongly under light, whether the aim is a full exterior coat or a focused accent on selected sections. The aerosol format is designed for spray application, which helps distribute paint evenly across shaped surfaces and recessed contours that are harder to cover with a brush. The gloss finish changes how the colour presents on the model, reflecting light across curves, edges and moulded lines for a cleaner finished appearance. This paint sits within the TS range used for model work, making it relevant for body shells, exterior parts and custom colour layouts where a single defined shade is needed. The 100 ml content also gives useful capacity for repeated passes across larger areas during a painting session. On the bench, TS-102 suits projects that need a saturated green statement, from full-body colour schemes to trim sections that break up a multi-tone design. It can also serve repaint work on replacement parts or fresh finishing on new builds where a gloss cobalt green tone is central to the final visual plan.
TS spray colours
TS-24 Purple Gloss, spray paint, 100 ml
300085024€10.491 l = €104.90
TS-24 Purple Gloss brings a bold purple tone and a glossy surface to plastic model projects in a 100 ml spray can. The aerosol format suits larger sections where an even coat matters, such as bodyshell panels, fairings or other shaped exterior parts that benefit from smooth colour coverage. This TS paint is identified as a special acrylic resin spray for model use. The can is intended for plastics, making it a practical choice when a project calls for a uniform finish across curved surfaces, edges and recessed shapes. The gloss effect adds a polished visual character that stands out under light and gives painted parts a cleaner finished appearance. The 100 ml fill offers enough paint for substantial exterior areas while keeping the handling familiar for hobby bench work. As an aerosol paint, it is classified as flammable and the pressurised can must be handled with care. On the workbench, TS-24 Purple Gloss fits projects that need a strong single-colour statement, whether refreshing a bodyshell, finishing a custom build or adding a distinctive accent to visible plastic parts. Used on prepared surfaces in light coats, it supports a neat, consistent result across model components with complex contours. Warning! Not suitable for children under 14 years.
TS spray colours
TS-28 Olive Drab 2 Flat, spray paint, 100 ml
300085028€10.491 l = €104.90
TS-28 Olive Drab 2 Flat brings a muted military shade to plastic model work in a 100 ml aerosol can. The flat finish keeps reflections low, so vehicle panels, equipment parts and other surfaces read with a more scale-focused appearance once the paint has cured. This TS series spray is identified in the data as a special acrylic resin spray for plastics. The aerosol format helps lay colour across wider sections where a brush would leave visible stroke patterns, and it can be used on curved shells, flat armour plates or shaped exterior parts that need an even coat. Olive Drab 2 suits military vehicles, field accessories and subdued camouflage schemes where a non-gloss surface is part of the final look. The 100 ml fill gives useful capacity for multiple parts or a larger single build, depending on the size of the surfaces being painted. On the bench, the can supports quick colour application for body sections, exterior panels and detail groups that share the same shade. For hobby painting sessions, it fits naturally into projects that call for a uniform flat green tone across plastic components while keeping the finish visually restrained rather than shiny. Warning! Not suitable for children under 14 years.
TS spray colours
TS-37 Lavender Gloss, spray paint, 100 ml
300085037€10.491 l = €104.90
TS-37 Lavender Gloss brings a vivid purple tone and a reflective finish to plastic model projects in a 100 ml aerosol format. The spray can layout suits broad, even application on curved shells, body panels and formed parts, where a brush can leave visible stroke marks across the surface. This TS colour is identified as a special acrylic resin spray for model use, with the shade code TS-37 clearly matched to Lavender Gloss. The aerosol format is designed for plastic model surfaces, making it suitable for scale car bodies, motorcycle fairings and other shaped components that benefit from a continuous coat. A gloss finish changes how light reads across edges, contours and panel shapes, so moulded lines and body forms stay visually clear after painting. The 100 ml fill also gives enough material for complete colour coverage on many single model bodies or for repeated work across smaller parts. In a hobby workspace, the can suits builders who want a fast, uniform base colour before decals, detail work or final display. It also fits repainting jobs, custom colour schemes and replacement parts that need to match a bright, polished look on plastic model assemblies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-39 Mica Red, spray paint, 100 ml aerosol
300085039€10.491 l = €104.90
TS-39 Mica Red brings a vivid red tone to model painting in a 100 ml aerosol format that suits broad, even colour application. The semi gloss finish gives painted parts a clean surface appearance straight from the can, making it a strong choice for body sections, shells and other visible exterior areas. As part of the TS spray paint range, this colour is supplied as a special acrylic resin spray for hobby use. The aerosol format helps lay down colour across curved panels, edges and recessed shapes without switching tools between sections. Mica Red works especially well where a brighter, more eye-catching finish is needed on scale subjects, whether the goal is a full body colour or selected accent areas. The red cap and TS-39 marking make the shade easy to identify within a paint setup or workshop drawer. For a glossier final look, TS-13 glossy clear coat can be applied over the painted surface. On the bench, TS-39 Mica Red fits naturally into body finishing, repaint work and colour matching across model projects. It suits builders who want a spray-applied red shade for plastic model parts and other hobby surfaces that call for a smooth, consistent coat. Warning! Not suitable for children under 14 years.
TS spray colours
TS-43 Racing Green Gloss, spray paint, 100 ml
300085043€10.491 l = €104.90
TS-43 Racing Green Gloss brings a deep green tone and a reflective finish to model painting in a compact 100 ml aerosol can. The spray format supports broad, even coverage on visible exterior sections, making it useful for body shells, fairings and other parts where a uniform coat shapes the final look. This colour belongs to the TS series of special acrylic resin sprays for model work. The can is intended for plastic surfaces, and the aerosol application suits larger areas that are harder to cover evenly with a brush. Racing Green Gloss fits naturally into classic motorsport schemes, heritage-inspired vehicle builds and custom colour plans that need a darker green with a polished surface effect. The cap colour also gives a quick visual reference when selecting shades from a paint rack or workbench setup. On the bench, the 100 ml size is easy to keep alongside masking materials, primers and finishing supplies for body painting sessions. For car, bike or aircraft modelling, the gloss surface provides a strong base appearance on its own and can also sit within multi-colour paint layouts where clean, consistent coverage across outer panels is the main goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-47 Chrome Yellow Gloss, spray paint, 100 ml
300085047€10.491 l = €104.90
TS-47 Chrome Yellow Gloss brings a bright yellow tone and a glossy surface to model painting work in a 100 ml aerosol can. As a special acrylic resin spray for plastics, it is suited to coating larger sections with an even colour layer, whether the task is a body shell, exterior panel or shaped accessory part on a model build. The can is marked TAMIYA COLOR FOR PLASTICS and AIRSPRAY 100 ml net volume, placing it clearly in the finishing stage of scale modelling. The spray instructions visible on the can indicate vigorous shaking before use, application from about 25 to 30 cm and building the colour in light coats. That sequence helps the paint settle across curves, edges and recessed sections instead of flooding detail. The Chrome Yellow Gloss shade also makes it useful where a clean, high-visibility colour accent is needed within a broader paint scheme. On the bench, this spray fits projects that call for fast coverage over parts that would take longer to brush paint evenly. It can be used when matching multiple components in the same colour or when a gloss yellow finish needs to stand out on a completed model. This is an aerosol paint and should be used only with the handling precautions stated on the can. Warning! Not suitable for children under 14 years.
TS spray colours
TS-51 Racing Blue Spray Paint, model color, 100 ml
300085051€10.491 l = €104.90
TS-51 Racing Blue is a special acrylic resin spray for hobby and scale model work, supplied in a 100 ml aerosol can. The semi gloss shade gives plastic model parts a strong blue finish that reads clearly on bodywork, fairings and shaped panels, especially where an even coat matters across wider surfaces. The aerosol format is built for direct application, so color can be sprayed onto contours, recesses and curved sections without mixing or decanting first. On plastic parts, that makes it useful for shells, exterior panels and other components that benefit from a uniform painted layer. The BasicText names TS-51 specifically as Racing Blue semi Gloss, making it a defined color choice within the TS spray range rather than a generic blue. For a glossier final appearance, the stated pairing is TS-13 glossy clear coat, which can be applied as a separate clear layer over the painted surface. This spray suits model building sessions where a single color needs to cover larger visible areas with a consistent tone. It also fits custom projects that call for a motorsport-style blue on plastic assemblies, whether the goal is a full body color, accent sections or coordinated repaint work across matching parts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-55 Dark Blue Gloss, spray paint, 100 ml
300085055€10.491 l = €104.90
TS-55 Dark Blue Gloss brings a deep blue colour coat to plastic model surfaces with the speed and reach of a 100 ml aerosol spray. The gloss finish catches light across body panels and curved parts, giving shells, fairings and other exterior sections a smooth, uniform appearance that suits display builds and race-inspired liveries. This paint belongs to the TS spray range and is identified by the TS-55 code, making it easy to match within a planned finishing scheme. The can is formulated as an acrylic resin spray for plastics, a common choice for model bodies and exterior parts that benefit from broad, even coverage. The aerosol application helps paint reach panel edges, curves and recessed shaping in one continuous pass, which is especially useful on larger sections where brush marks would interrupt the finish. Dark Blue Gloss also works well when a build needs a solid base colour before further detailing and markings are added. On the bench, TS-55 suits body shells, cowlings and other visible plastic parts that define the final look of a model. In a finishing session with multiple subassemblies prepared side by side, the spray format helps keep colour application consistent across matching parts while the gloss surface gives the completed build a crisp, polished character. Warning! Not suitable for children under 14 years.
TS spray colours
TS-56 Brillant Orange Gloss, spray paint, 100 ml
300085056€10.491 l = €104.90
TS-56 Brillant Orange Gloss is a 100 ml aerosol paint for plastic models, bringing a vivid orange tone and a gloss surface to bodyshells, fairings and exterior parts. The spray format helps lay colour across broad panels and curved sections with a more uniform finish than hand brushing, which is especially useful when a build calls for a clean, uninterrupted coat. This TS paint belongs to the Tamiya Color spray range for plastics and is intended for model finishing rather than general household use. The can contains a special acrylic resin spray mixture with pigments and solvents in a pressurised aerosol format. The label identifies it as flammable, and the safety data states that use should be limited to well-ventilated areas. For modelers working on car shells, bike cowlings or other shaped components, the aerosol pattern helps reach contours, corners and recesses that can be slower to cover with a brush. TS-56 suits projects where a bright gloss orange is part of the livery, body colour or accent scheme. It can be used during the painting stage of scale builds, whether covering a full outer shell or adding a bold colour block to selected plastic parts. This paint is intended for adult modelers only. Warning! Not suitable for children under 14 years.
TS spray colours
TS-58 Pearl Light Blue Gloss, spray paint, 100 ml
300085058€10.491 l = €104.90
TS-58 Pearl Light Blue Gloss brings a bright pearl tone and a reflective gloss surface to plastic model finishing in a 100 ml aerosol can. The spray format helps lay colour across larger body panels, curved shells and shaped exterior parts with a more continuous coat than hand painting can usually achieve on the same surfaces. This special acrylic resin spray is intended for model use on plastic parts, where an even outer layer and a clean visual finish matter to the final look. Pearl Light Blue Gloss adds both colour and sheen, making it useful for full body coverage as well as selected accent areas that need a lighter metallic character. The aerosol can supports broad, sweeping passes over prepared surfaces, which is especially useful on contours, edges and recessed sections that can show brush marks more easily. The 100 ml volume also gives enough paint for more than a single small section, depending on the size of the model and the coverage style used. On the bench, TS-58 fits naturally into body finishing, exterior detailing and repaint work on plastic model kits. Used in light coats on clean parts, it supports a smoother visual result on car bodies, fairings, panels and other formed components where colour consistency is part of the finished presentation. Warning! Not suitable for children under 14 years.
TS spray colours
TS-59 Pearl Light Red Gloss, spray paint, 100 ml
300085059€10.491 l = €104.90
TS-59 Pearl Light Red Gloss is a 100 ml spray paint for plastic model finishing, combining quick colour application with a glossy pearl effect that reads clearly across curved bodies and shaped parts. The aerosol format helps cover larger surfaces in smooth passes, making it well suited to body shells, fairings and other model sections where an even coat matters to the final look. This TS colour belongs to Tamiya's special acrylic resin spray range and is intended for hobby painting work rather than general household use. The Pearl Light Red shade brings a light red base with a lustrous finish that changes the character of a model more strongly than a flat coat. The can is labelled for adult modelers only, and the net content is 100 ml. As an aerosol, it is classified as extremely flammable and pressurised, so handling belongs in well ventilated working areas and away from heat or open flames. In practical use, this spray suits model projects that need fast, even coverage across larger plastic parts before detailing and final assembly. It also fits repainting sessions, custom colour layouts and refresh work on existing builds where a gloss pearl tone is part of the planned finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-62 NATO Brown Flat, spray paint, 100 ml
300085062€10.491 l = €104.90
TS-62 NATO Brown Flat is a 100 ml spray paint for model finishing, giving plastic surfaces a muted brown coat with the speed and reach of an aerosol can. The flat colour suits military subjects, field accessories and weathered details where a low-sheen surface helps preserve the scale look across broader areas. This TS series paint is described as a special acrylic resin spray, combining pigments, binder and propellant in a pressurised can for direct application. The aerosol format helps cover larger sections more evenly than hand brushing, which is useful on body shells, armour panels and terrain parts with repeated edges or recessed shapes. The colour reference TS-62 keeps the shade easy to match within a planned paint scheme or touch-up workflow. The can contains 100 ml net volume, giving enough material for multiple passes depending on the size and shape of the painted parts. Used on model kits and hobby components, the spray suits bench sessions where broad, consistent colour coverage matters as much as the final tone. For handling, the safety data states that the aerosol is extremely flammable, the container is pressurised and should not be exposed to temperatures above 50°C, so application belongs in well-ventilated work areas with careful storage between sessions. Warning! Not suitable for children under 14 years.
TS spray colours
TS-73 Clear Orange Gloss, paint spray, 100 ml
300085073€10.491 l = €104.90
TS-73 Clear Orange Gloss is a synthetic lacquer spray developed for model painting, with a 100 ml can size that suits broad body sections where an even coat matters. The aerosol format helps cover large surfaces quickly, and the short curing time keeps painting sessions moving when a shell, body panel or other exterior part needs a smooth gloss layer. The Clear Orange Gloss colour works especially well where a transparent orange effect is needed rather than a solid opaque coat. On model car bodies in 1/24 scale, one can provides enough paint to fully cover 2 or 3 bodies, which gives a useful reference when planning a full repaint or preparing several shells in the same finish. Because the TS formula is not affected by acrylic or enamel paints, detail colours can be added after the main sprayed coat has dried. That makes it easier to separate broad colour coverage from smaller painted accents and trim lines. On the workbench, the spray can format suits steady passes across curved panels, roofs and larger side sections. It also fits staged finishing, where the main colour is applied first and smaller details are picked out later with enamel or acrylic paints for a more defined final look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-90 Brown JGSDF Spray Paint, Lacquer 100 ml
300085090€12.991 l = €129.90
TS-90 Brown JGSDF Spray Paint is a 100 ml lacquer aerosol created for Japanese ground vehicle finishes, bringing the JGSDF brown tone onto larger model surfaces with fast, even coverage. Released in conjunction with the Japanese Type 10 Tank, it gives builders a direct colour option for a realistic exterior finish on this modern main battle tank subject. Beyond the Type 10, TS-90 is also suitable for Type 61, Type 74 and Type 90 Japanese tank models, so the same can supports several armour builds within the same national scheme. The colour is also available in the acrylic paint range as XF-72 Brown JGSDF, which helps when a build combines sprayed base coats with brush-painted detail work in matching tones. As a lacquer spray, it is shaped for broad panels such as hull sides, turret tops and other exterior sections where an even coat matters to the final appearance. On the workbench, this paint suits builders preparing a full vehicle finish or refreshing a specific JGSDF subject already in the collection. It fits naturally into armour modelling sessions where accurate military colours, smooth surface coverage and consistent tone across multiple panels define the finished result. Warning! Not suitable for children under 14 years.
TS spray colours
TS-90 Dark Green JGSDF, spray paint, 100 ml
300085091€12.991 l = €129.90
TS-90 Dark Green JGSDF is a lacquer spray paint developed for military model finishing, with a 100 ml aerosol can that lays down broad colour coverage across larger surfaces. The dark green JGSDF shade is intended to help recreate the appearance of Japanese Ground Self Defense Force vehicles, especially when a model calls for a uniform, realistic coat over hull and turret panels. This colour was released in connection with the Japanese Type 10 Tank and is also suitable for Type 61, Type 74 and Type 90 tank models named in the data. The lacquer formula makes it useful where a smooth sprayed layer is needed across flat armour plates, edges and shaped body sections. In the wider paint range, the same military colour family is also available as acrylic references XF-72 Brown JGSDF and XF-73 Dark Green JGSDF, which helps when a build combines sprayed base coats with brush-painted detail work. The aerosol format suits modelers who want fast, even application on larger assemblies rather than building the finish through repeated brush coats. On the bench, the 100 ml can fits naturally into camouflage and finishing stages for modern Japanese armour subjects. Use is intended in well ventilated areas, with the aerosol handled carefully because the can is extremely flammable and under pressure. Warning! Not suitable for children under 14 years.
TS spray colours
TS-99 IJN Gray, paint spray, flat 100 ml
300085099€12.991 l = €129.90
TS-99 IJN Gray brings a specific Japanese Navy color reference into a 100 ml paint spray that is easy to apply on model surfaces. The flat finish keeps the final look muted rather than glossy, which suits military and naval subjects where a service-style appearance matters across larger painted sections. This TS paint spray is identified as the Maizuru arsenal shade of IJN Gray, giving the color a defined historical reference instead of a broad general gray. The aerosol format supports fast application on hull panels, deck structures and other broad areas where brush marks can interrupt the finish. The can contains 100 ml, a practical volume for repeated passes across larger assemblies or for keeping one consistent tone across multiple matching sections. The paint belongs to the TS spray range and is intended for model use. On the workbench, TS-99 fits builds that need a flat naval gray for ships, military subjects or other projects calling for this exact named tone. It also works well when separate sections need to be painted in the same color family, helping keep the overall finish visually consistent from one stage of the build to the next. Warning! Not suitable for children under 14 years.
TS spray colours
TS-12 Orange Gloss Spray Paint, Model Paint 100 ml
300085012€10.491 l = €104.90
TS-12 Orange Gloss is a 100 ml model paint spray designed for plastic parts, combining fast aerosol coverage with a bright gloss finish that gives larger surfaces a clean, uniform look. The special acrylic resin formula suits exterior model sections where brush marks can interrupt the final appearance, such as body panels, fairings and other shaped components. The aerosol format is especially useful when a build calls for broad, even colour across curved shells or multiple matching parts. Light passes help the colour build gradually, while the gloss finish brings extra visual depth to orange bodywork and trim. The can is labelled for plastics, making it a focused choice for model makers working on compatible plastic assemblies rather than general household painting. As part of the TS paint range, TS-12 offers a straightforward route to bold colour application on scale projects where consistency across visible outer surfaces matters. On the bench, it suits body finishing, colour changes and accent work on custom builds. In a model workshop setting, the 100 ml can size gives useful capacity for covering larger sections while keeping the application method simple and direct. Warning! Not suitable for children under 14 years.
TS spray colours
TS-15 Blue Gloss, spray paint, 100 ml aerosol
300085015€10.491 l = €104.90
TS-15 Blue Gloss brings a deep blue tone and a glossy surface to scale model work in a 100 ml aerosol format that is made for plastic parts. The spray pattern suits larger body sections, curved panels and shells where an even colour layer matters as much as the shade itself. This TS paint belongs to Tamiya Color for plastics and is identified as a special acrylic resin spray. The aerosol format helps lay down thin coats across broad surfaces, while the gloss finish gives painted sections a brighter, more reflective look than a flat colour. The can is marked for adult modelers only, and the paint is supplied in a pressurised container. Visible use guidance on the can recommends shaking vigorously, spraying from 25 to 30 cm and applying light coats before drying. These details make it easier to plan coverage on bodywork, fairings or exterior model panels where a brush-applied finish can look uneven. On the bench, TS-15 suits projects that need a solid blue base coat before markings, trim painting or a final clear layer. It can be used on single-colour sections or as part of a multi-step paint scheme where clean, even coverage across plastic surfaces is the main goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-20 Metallic Green, spray paint, 100 ml
300085020€10.491 l = €104.90
TS-20 Metallic Green brings a vivid green tone to plastic model surfaces with the speed and reach of an aerosol spray. The semi gloss finish gives body panels, fairings and formed parts a coloured coat that reads clearly on curves, edges and larger sections. This TS paint is supplied in a 100 ml can and is intended for model finishing rather than brush application on small areas. The aerosol format helps cover broad exterior sections in fewer passes than hand painting, which is useful on car bodies, cowlings and other shaped components. The paint belongs to the TS spray range shown as a special acrylic resin spray in the supplied documentation. For a different final sheen, TS-13 glossy clear coat can be applied over TS-20 to create a glossier surface finish while retaining the underlying Metallic Green colour. On the bench, TS-20 suits coordinated colour work across multiple matching parts that need the same tone and surface character. It also fits repainting sessions where a single green shade needs to carry across a full shell, separate panels or replacement components for a consistent finished appearance. Warning! Not suitable for children under 14 years.
TS spray colours
TS-22 Light Green Gloss, spray paint, 100 ml
300085022€10.491 l = €104.90
TS-22 Light Green Gloss brings a vivid light green tone and a glossy surface to model finishing in a 100 ml aerosol can. The spray format lays colour across broad areas quickly, making it useful for body panels, shells and other parts that benefit from an even coat and a clean, uniform sheen. This TS paint is identified in the data as a special acrylic resin spray and is presented for plastics, placing it squarely in model painting workflows rather than general household use. The can carries the TS-22 code on both cap and label, which helps keep colour planning clear when several shades are lined up on the bench. Aerosol delivery also reaches curves, edges and recessed shapes differently from brush application, which matters when a finish needs consistent coverage across shaped model parts. The 100 ml fill gives enough paint for more than a single small touch-up, so larger sections and batches of smaller components can be coated in the same colour run. On a build table, TS-22 Light Green Gloss fits naturally into body finishing, accent work and repaint jobs where a bright gloss green is the target shade. It can be used when refreshing a single panel, coating a full shell or bringing matching colour to separate parts that need the same surface character across the completed model. Warning! Not suitable for children under 14 years.
TS spray colours
TS-31 Bright Orange Gloss, spray paint, 100 ml
300085031€10.491 l = €104.90
TS-31 Bright Orange Gloss brings a vivid orange tone and a glossy surface to plastic model work, with aerosol application that covers broad panels and shaped parts in a smooth, even coat. The 100 ml can suits finishing sessions where a brush would struggle to keep large surfaces visually consistent. This special acrylic resin spray is identified by the TS-31 code and is intended for plastic model surfaces. The gloss finish gives body sections, fairings and exterior details a brighter, cleaner look than a flat coat, which helps colour lines and panel shapes stand out clearly. The cap shows the paint shade for quick visual reference when matching colours across a build or planning contrast areas. As an aerosol format, it is suited to sweeping passes over shells and panels rather than detail-by-detail application with a brush. On scale model projects, the colour works well for full body coverage, bold accent areas or repainting selected exterior parts. The can is easy to keep alongside other finishing supplies for repeat touch-up work, livery planning or colour-coded builds that need a strong gloss orange presence. Warning! Not suitable for children under 14 years.
TS spray colours
TS-54 Light Metallic Blue, spray paint, 100 ml
300085054€10.491 l = €104.90
TS-54 Light Metallic Blue brings metallic colour and spray application together in a 100 ml can made for model finishing. The semi gloss tone gives plastic surfaces a blue finish with a reflective character that catches light across curved bodywork, spoilers and shaped detail parts. This special acrylic resin spray is supplied as an aerosol, so colour reaches broad panels, recesses and edges in a continuous coat rather than in separate brush strokes. The Light Metallic Blue shade suits full body shells as well as accent sections where a cooler metallic tone is needed. The can format supports quick, consistent coverage on model components that benefit from an even painted surface. BasicText also names TS-13 glossy clear coat as the matching option when a higher-gloss final appearance is wanted over this colour layer. On the bench, TS-54 fits painting sessions for car bodies, fairings, exterior panels and other plastic model parts that need a uniform metallic finish. It also works well when several matching sections need the same shade, keeping colour continuity across separate components in one build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-57 Blue Violet Gloss, spray paint, 100 ml
300085057€10.491 l = €104.90
TS-57 Blue Violet Gloss brings a vivid coated finish to plastic model work with a spray format that covers broad surfaces quickly and evenly. The 100 ml can suits body sections, exterior panels and shaped parts where a uniform gloss colour helps the finished build read cleanly under light. This special acrylic resin spray contains pigments, binders and solvents in a pressurised aerosol, so the paint is delivered as a fine mist rather than by brush contact. That application method helps reach contours, edges and recessed areas on model parts with a more continuous coat across the surface. The Blue Violet Gloss shade adds a saturated colour note that stands out on display builds, custom liveries and detail-focused finishing projects. The can is labelled for plastics, making it a direct match for many model kit components used in hobby assembly and finishing. During painting sessions, light coats support controlled colour build-up on shells, panels and trim pieces. Use in well ventilated areas and keep the aerosol away from heat, sparks and open flames, as the can is extremely flammable and pressurised. Warning! Not suitable for children under 14 years.
TS spray colours
TS-60 Pearl Green Gloss, spray paint, 100 ml
300085060€10.491 l = €104.90
TS-60 Pearl Green Gloss is a 100 ml spray paint for plastic model work, combining a pearl green color tone with a gloss finish that catches light across shaped surfaces. The aerosol format makes it suited to broad exterior areas such as bodyshells, fairings and larger panels where an even visual result matters. This TS series paint is identified in the data as a special acrylic resin spray, placing it within hobby finishing workflows for scale models and similar builds. The can is labeled for plastics, so it fits projects where molded parts need a consistent color layer without brush marks across wider sections. Pearl finishes change character as light moves over edges, curves and recesses, which gives sculpted forms more visual separation than a flat color alone. The 100 ml fill also makes the can practical for single larger bodies or several smaller painted sections, depending on the size of the build. On the bench, TS-60 suits custom color schemes, replacement body finishing and detail-led repainting where a glossy green surface is part of the final look. It can be used to unify separate plastic components under one color direction or to create standout accent areas on racing, road or fantasy subjects. Warning! Not suitable for children under 14 years.
TS spray colours
TS-67 IJN Grey Flat Sasebo Arsenal Spray Paint
300085067€12.291 l = €122.90
TS-67 IJN Grey Flat Sasebo Arsenal is a 100 ml spray paint for model building that lays down a flat grey coat across larger surfaces with the speed and reach of an aerosol can. The synthetic lacquer formula cures in a short time, which helps keep painting sessions moving when a body shell, hull or other broad section needs full colour coverage. The paint is intended for large model surfaces rather than small brush details, and the aerosol format supports an even pass across wide panels. One can contains enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a useful coverage reference before a project starts. After the main sprayed coat has dried, enamel and acrylic paints can be used to pick out smaller details on top. That sequence makes it easier to separate broad base colour work from later trim, markings or panel accents. On the workbench, TS-67 suits builds that call for a subdued arsenal grey with a flat finish instead of shine. It fits painting stages where a complete exterior coat comes first and finer colour work follows after, keeping the main surface treatment and the detail stage clearly separated. Warning! Not suitable for children under 14 years.
TS spray colours
TS-77 Flat Flesh 2, spray paint, 100 ml
300085077€12.291 l = €122.90
TS-77 Flat Flesh 2 is a 100 ml spray paint for model finishing that brings fast coverage to larger plastic surfaces. The synthetic lacquer formula cures in a short period of time, which helps keep painting sessions moving when a body shell, fairing or broad exterior panel needs a uniform coat. This spray is especially useful when a brush would leave larger areas slower to cover or harder to keep visually consistent. The paint is intended for plastics, making it suited to many scale model assemblies where smooth, even colour across curved panels matters. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a clear planning reference before starting a full exterior coat. After the main colour has dried, enamel and acrylic paints can be applied for smaller details, so trim, accents and fine painted sections can be added in a separate step without changing the base coat approach. On the bench, the spray format suits broad passes across bodywork and other large exterior parts where steady coverage matters most. It fits naturally into model painting routines that start with an overall colour coat and then move to finer hand-painted detail work on selected areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-78 Field Grey 2 Flat, paint spray, 100 ml
300085078€12.291 l = €122.90
TS-78 Field Grey 2 Flat is a 100 ml paint spray made for model work where broad surfaces need a fast, even coat. The synthetic lacquer formula cures in a short time, so body shells, panels and other larger sections can move on to the next finishing step without a long wait at the bench. The aerosol format is especially useful when a brush would leave visible stroke patterns across wide areas. Field Grey 2 Flat gives a muted, non-gloss finish that suits military subjects and other builds that call for a restrained colour tone. The can is sized to cover about 2 to 3 car bodies in 1/24 scale, which makes it suitable for a complete body coat and repeat work on related parts. The paint layer also supports mixed finishing methods, because enamel and acrylic paints can be applied afterwards for smaller accents and picked-out details. On a scale car body, the spray can handle the main exterior colour before window frames, trim lines or small parts are finished by hand. On military models or display pieces, it works well for larger hull, body or equipment sections where a flat surface and consistent tone matter across the whole build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-82 Black Rubber Flat, paint spray, 100 ml
300085082€12.991 l = €129.90
TS-82 Black Rubber Flat is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover broad surfaces with an even coat. On car bodies, body panels and other larger parts, the aerosol format supports smooth application where brush painting can leave visible overlap on wide areas. The stated coverage gives a useful planning point: one can is enough to fully cover 2 or 3 car model bodies in 1/24 scale. That makes the spray suitable for a single detailed project with spare capacity or for several smaller finishing sessions across matching builds. The Black Rubber Flat tone suits parts that call for a restrained, non-gloss look rather than a reflective surface. After the main coat has dried, enamel and acrylic paints can be used to pick out smaller details, because the TS lacquer layer is not affected by those paint types. In practice, this supports a clear finishing sequence on scale models: broad areas first with the spray can, then finer accents added by hand on trim, edges or mechanical details. For builders working on car model bodies and similar large parts, TS-82 combines fast coverage, a flat black rubber tone and compatibility with follow-up detail painting in one focused finishing step. Warning! Not suitable for children under 14 years.
TS spray colours
TS-85 Bri. Mica Red Gloss F60, paint spray
300085085€11.491 l = €114.90
TS-85 Bri. Mica Red Gloss F60 is a synthetic lacquer spray made for coating large model surfaces with a smooth, even color layer. The 100 ml aerosol format suits broad body sections where brush painting would leave a slower, more segmented finish, and the bright mica red gloss tone gives car bodies a vivid, polished look. The formula cures in a short time, which helps keep painting work moving between base coating and later detail stages. Tamiya states that the spray paint is not affected by acrylic or enamel paints, so trim lines, small accents and picked-out parts can be added after the main color coat with those paint types. A single can provides enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a useful reference point for planning stock and project size. As an aerosol paint, it is supplied in a pressurized can and should be used with the handling care appropriate to that format. On the bench, TS-85 fits projects that need fast coverage across curved shells, fenders and roof sections before smaller details are finished by hand. It also works well in multi-stage paint routines where the main body color goes on first and secondary accents follow once the lacquer coat has cured. Warning! Not suitable for children under 14 years.
TS spray colours
TS-92 Metallic Orange Spray Paint, 100 ml Can
300085092€11.491 l = €114.90
TS-92 Metallic Orange spray paint brings bright metallic colour to larger model surfaces with the convenience of an aerosol can and the fast curing behaviour of synthetic acrylic lacquer. The 100 ml can is sized for broad coverage, making it well suited to full body shells and other sections where an even coat matters. The paint is formulated as a synthetic acrylic lacquer that cures in a short period of time, which helps keep multi-step finishing work moving. One can provides enough paint to fully cover 2 or 3 plastic model car bodies in 1/24 scale, giving a useful planning guide before a painting session starts. The metallic orange finish adds a reflective, vivid look that stands out on body lines, curves and larger panels. The formula is not affected by acrylic or enamel paints. It may also be applied over a cured spray painted surface, which supports layered paint schemes and follow-up colour work. At the workbench, the can suits broad passes across car bodies, body panels and similar model parts where brush painting would take longer to level out. For repainting, touch-up sessions or full colour changes on compatible model surfaces, TS-92 keeps the process focused on coverage, colour depth and a clean sprayed finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-93 Pure Blue gloss, spray paint, 100 ml
300085093€11.491 l = €114.90
TS-93 Pure Blue gloss is a spray paint for plastic models that brings a strong blue finish to larger surfaces with the speed and reach of an aerosol can. The 100 ml format is sized for broad body sections, where an even coat matters across doors, roofs, bonnets or full shell exteriors. The paint is a synthetic lacquer that cures in a short period, helping colour work progress without long waits between stages. Tamiya states that one can covers 2 or 3 car bodies in 1/24 scale, which gives a useful guide when planning a single shell or several builds in the same colour. The formula is described as not being affected by acrylic or enamel paints, so detail colours can be added after the main blue coat has been laid down. That makes it easier to separate the main body colour from smaller painted elements instead of trying to complete every section with one paint type alone. On a workbench, TS-93 Pure Blue gloss suits full-body colour application on model car shells and other large exterior parts that benefit from spray coverage rather than brush painting. It also fits finishing sessions where the main colour is applied first and smaller accents are added later with other paint types for a more defined final look. Warning! Not suitable for children under 14 years.