RC electronics
Explore a wide selection of RC electronic spare parts for your RC vehicles: from LEDs and speed controllers to servos and more, everything you need to equip your models perfectly. For more information, click here.
RC electronics
3mm LED Light Red, RC light set for TLU-01
300054009€16.49
This 3 mm red LED light set adds a crisp scale lighting accent to compatible RC body projects and is built specifically for use with the TLU-01 Light Control Unit. The compact format suits smaller light positions on model bodies, where a larger diameter would interrupt the proportions of the shell. Each set contains 2 LED bulbs and a wired lead arrangement that supports clean integration into custom lighting layouts. The red colour works well for rear light positions, brake light styling or other scale details where a defined red point of light is needed. Tamiya developed this LED line to expand lighting options across polycarbonate RC car bodies, making it easier to tailor the visual setup to a specific vehicle style rather than relying on a single standard arrangement. These LEDs are not compatible with other units such as MFC Units for 1/14 R/C Tractor Trucks. On a touring car shell, drift body or road vehicle replica, the 3 mm size helps place light neatly into tighter lamp areas while keeping the scale look consistent. The set is suited to builders who want to refine a body with working light details and a more finished appearance during display or running sessions. Warning! Not suitable for children under 14 years.
RC electronics
3mm Orange LED Light, RC accessory for TLU-01
300053912€13.99
This 3 mm orange LED light set adds a focused scale lighting effect to compatible polycarbonate RC car bodies. The compact diameter supports neat placement in tighter body areas, while the orange light colour helps create custom lighting layouts with a distinct visual signature. The set contains 2 LED bulbs and each one comes with a 16 inch lead for flexible cable routing inside the bodyshell. The connector layout is made for the TLU-01 Light Control Unit, so the wiring matches that system directly rather than requiring a mixed electronics setup. This is an RC accessory rather than a standalone lighting unit, and it is intended specifically for TLU-01 use. Scope of delivery: 1x LED set. Installed on a touring car, drift shell or other compatible polycarbonate body, the pair can be positioned for indicator-style accents, side markers or other scale lighting details supported by the chosen layout. The small format and paired configuration make it suitable for builders shaping a clean, model-specific lighting arrangement with orange illumination. Warning! Not suitable for children under 14 years.
RC electronics
5mm LED Light red, lighting set for TLU-01
300053911€13.99
This red 5 mm LED light set brings scale-style illumination to compatible polycarbonate RC car bodies and adds a more defined lighting layout to custom vehicle builds. Each set contains 2 LED bulbs, pre-wired for installation and intended specifically for the TLU-01 Light Control Unit. The 16" wires provide useful reach for routing through the bodyshell and positioning the lamps where red lighting is needed. The compact 5 mm format suits a wide range of body lighting concepts, whether the goal is rear light placement, marker light accents or a more detailed competition look. The dedicated connector layout is designed around the TLU-01 system, so the set integrates into that lighting setup rather than serving as a general-purpose LED harness. This accessory fits hobby projects where lighting details are part of the final finish on an RC car body. For compatibility, the set is designed for use with TLU-01 only and cannot be used with other items such as 1/14 R/C Tractor Trucks. The scope of delivery contains 1 LED set with 2 red LEDs. Warning! Not suitable for children under 14 years.
RC electronics
Buggy Light Pod Set for LEDs, RC accessory
300054972€12.79
The Buggy Light Pod Set for LEDs adds a focused scale upgrade to Tamiya buggy builds with 2 distinct pod shapes and matching polycarbonate lenses. Round and square designs create different front-end accents, letting the body or bumper take on a more purposeful competition look once the pods are positioned and fixed in place. The set supplies 4 round pods and 4 square pods, plus 4 round and 4 square lenses to match each style. The lenses are formed on a polycarbonate sheet and are cut out along the marked lines before installation. Separately sold 5 mm LEDs can be fitted into the pods, and illumination can be powered through units such as the TLU-01. The mounting concept also allows different pod combinations, so the same set can support a compact paired layout or a fuller multi-light arrangement depending on the chosen buggy setup. Compatibility is stated for WR-02 and GF-01 series chassis when the P Parts bumper from the GF-01CB chassis is used. The pods can also be positioned on bumper, body or side mounting points as the build allows, giving re-issue buggies and comical chassis projects extra visual depth through added lamp detail and optional lighting effects.
RC electronics
Cable Clip 4 pcs., model accessory, self-adhesive
309400429€4.89
This 4-piece Cable Clip set adds a simple routing point for LED wiring in compatible model applications. Each clip combines a flat self-adhesive base with a raised retaining tab, so the wire can be guided along a chosen path instead of hanging loose inside the build. The silver base and dark upright tab keep the construction compact, which helps when space around body panels or chassis sections is limited. The clip shape is focused on cable management rather than decoration. The adhesive backing allows placement directly where the lead needs support, while the upright tab holds the cable at a defined point and helps maintain a cleaner internal layout. That can be useful when fitting lighting components, arranging wire runs around existing parts, or keeping the installation visually ordered during finishing work. Supplied as 4 matching clips, the set provides several attachment points for one build or for multiple routing positions. In use, the clips suit model projects that add LED lighting and need the wiring kept close to the intended route. They can be placed where a lead changes direction, passes along an inner surface, or needs a fixed anchor to keep the layout controlled and tidy during assembly and display. Warning! Not suitable for children under 14 years.
RC electronics
LED 3mm Halogen White, model light set, TLU-01
300054599€15.49
The LED 3mm Halogen White TLU-01 brings a classic halogen-style glow to scale vehicle lighting, using a 3 mm format that suits smaller lamp housings and period-inspired body styles. Its halogen white tone is aimed at recreating the look associated with older road cars, rally machines and utility vehicles rather than a colder modern light effect. The set contains 2 high-brightness LEDs and is intended for connection to the TLU-01 Light Control Unit. That direct connection makes it a focused choice for builders planning wired illumination on compatible Tamiya model vehicles. The 3 mm lamp size can be used to depict headlights, fog lamps, position lights and reverse lamps, which opens up several authentic placement options across one shell. The wired layout and connector format support neat routing inside a body where compact lighting points matter. This light set suits projects where the visual character of the lamps matters as much as the body shape, especially on classic auto subjects and other scale vehicles with smaller light openings. It is also useful when replacing or expanding lighting on an existing compatible build. Please note the stated compatibility restriction: this set is not compatible with Multi-Function Control Units 53957, 56511 and 56523.
RC electronics
LED 5mm Halogen white TLU-01, model light set
300054600€15.49
This 5 mm halogen-style white LED set brings a classic lamp tone to model lighting, with a softer halogen shade that suits vintage road cars, rally machines and scale builds that call for period-correct illumination. The 2 clear LEDs arrive pre-wired, making them ready to place where a build needs focused white light rather than a blue-tinted modern effect. Each LED can be used to depict a different lamp position depending on the build plan, including headlights, fog lamps, position lights and reverse lamps. The long paired wires end in a small 2-pin connector dedicated to the TLU-01 Light Control Unit, so the electrical connection follows the intended Tamiya lighting format. A small metal mounting piece is also included for installation support where the light unit needs a fixed position inside the body or lamp area. This accessory suits scale projects where the lighting finish matters as much as the body shape, especially on classic autos and other models with visible front or rear lamp details. Compatibility is limited to the TLU-01 system; Multi-Function Control Units 53957, 56511 and 56523 are not supported, so the fit should be checked before wiring a build.
RC electronics
LED Light white 3mm, RC light set for TLU-01
300054008€16.99
This RC light set adds white illumination to scale vehicle builds with 3 mm LED bulbs sized for compact lamp positions on polycarbonate RC car bodies. The clear LED heads and attached leads support clean integration into custom body lighting, whether the aim is a subtle road-car look or a brighter race-inspired layout. Each set contains 2 wired LED bulbs, giving a matched pair for symmetrical light placement across the front or rear of a body shell. The long leads support routing through the shell toward the control unit, which helps keep the visible lighting points small while the wiring runs inside the body. The white output suits headlight-style applications and other clear lighting accents where a neutral light colour is needed. These LEDs are designed specifically for the TLU-01 Light Control Unit and cannot be used with other items such as MFC units for 1/14 R/C tractor trucks. In a workshop setup, the pair can be positioned to match molded lamp buckets or custom drilled openings in a polycarbonate shell. On a finished RC car, the 3 mm format keeps the lighting detail in scale while opening up more individual design options across different body styles. Warning! Not suitable for children under 14 years.
RC electronics
LED Light white 5mm, RC light set for TLU-01
300053910€18.99
This 5 mm white LED light set brings a clean scale lighting effect to compatible RC body projects and gives custom builds a sharper visual finish once installed. The pre-wired layout is made for the TLU-01 Light Control Unit, so the connection concept stays focused on one dedicated system rather than mixed electronics. The set contains 2 LED bulbs and a 16 in lead length on each light, which gives useful reach when routing wiring through a polycarbonate bodyshell or placing light points at separate mounting positions. The white light tone suits front lighting, auxiliary lamps or other detail-focused layouts where a clear, bright appearance matters. The compact 5 mm format also helps when planning openings and placement in body sections shaped for scale light details. In use, the light set fits builders refining an RC car bodyshell with working illumination rather than leaving molded lamp areas unlit. It also suits replacement or expansion work on an existing TLU-01 based setup where matching size, colour and connector format matter. This accessory is intended for ages 14 years and up. Warning! Not suitable for children under 14 years.
RC electronics
Position Light/F J15, model accessory, LED wiring
317175097€14.79
Position Light/F J15 is a model accessory built as an LED wiring harness for lighting functions in a compatible setup. Multiple connected leads, white plug-in connectors and a long orange cable section create a clear electrical link between installed components while keeping the wiring path easy to follow inside the model. The harness combines teal, white and orange wires in a bundled layout held together by a central strap, so the cable run stays grouped instead of spreading across the installation area. Visible metal terminals in the connector ends indicate a direct plug connection rather than loose bare-wire fitting. The extended loop of orange wire adds extra reach where the lighting circuit needs to cross a wider section of the chassis or body interior. As a spare or replacement electrical assembly, it supports repair work when an existing light connection needs to be renewed with the same style of routed lead set. This kind of harness suits model builds that use dedicated lighting functions and internal cable routing between electronic units. It can be fitted where organised lead management, connector-based installation and a defined wire path matter for a tidy technical layout.
RC electronics
Sensor Cable Soft 9cm, brushless ESC accessory
300022100€5.29
This soft sensor cable is made for the sensor connection between a brushless ESC and a compatible motor, giving RC electronics a compact 9 cm link that fits neatly into tighter chassis layouts. The flexible lead is easier to route around installed components, which helps keep the wiring path controlled when space inside the model is limited. As a single replacement or spare cable, it covers one specific task in the drivetrain electronics: carrying the sensor signal between matched brushless components. The soft construction matters most during installation, because the cable can bend more readily through narrow sections of the chassis than a stiffer lead. That makes it useful for maintenance, for refreshing an existing setup, or for completing a new electronics arrangement where cable length needs to stay short and precise. On the bench, the 9 cm format suits compact RC builds that place the ESC and motor close together. In running models with limited room around the drivetrain, the short lead helps avoid excess cable inside the chassis while keeping the sensor connection in place. Warning! Not suitable for children under 14 years.
RC electronics
Sensor Cable, Brushless ESC Accessory, 16 cm
300022102€5.29
This soft sensor cable provides the dedicated link between a brushless ESC and a compatible motor, with a 16 cm length that suits compact model layouts where wiring needs to pass cleanly between mounted electronics. The flexible lead is shaped for installations that call for tighter bends and tidier cable runs inside the chassis. As a single included cable, it serves as a direct replacement for an existing lead or as part of a new brushless electronics setup. The soft construction helps when routing around battery trays, upper decks, motor mounts or nearby drivetrain parts, where a stiffer lead can be harder to position. Its role is specific and functional: it carries the sensor connection required by compatible brushless ESC and motor combinations. The compact format also makes it easier to integrate into builds where available room is limited by the surrounding radio and drive components. In workshop use, the cable can be fitted during an electronics refresh, a motor swap or a chassis rebuild that calls for a fresh sensor lead. It also suits keeping a spare in the pit box for maintenance between running sessions, when a worn or damaged connection cable needs a like-for-like replacement. Warning! Not suitable for children under 14 years.
RC electronics
Soft Sensor Cable 12cm, brushless ESC accessory
300022101€5.29
This soft sensor cable creates the signal link between a brushless ESC and a compatible motor in RC model electronics, with a 12 cm length that suits short routing paths inside the chassis. The flexible lead is easier to guide through tight installation areas where rigid wiring can be awkward to position. As a single replacement or setup component, it supports sensor-based brushless systems that rely on a dedicated cable between speed controller and motor. The soft construction helps the lead follow the layout of nearby electronics and drivetrain parts with less resistance during installation. That makes it useful when the cable path passes close to side guards, upper decks or battery holders and a compact run is preferred over extra slack. Included contents are 1 soft sensor cable for brushless ESC and motors. In workshop use, the cable fits neatly into fresh RC builds as well as maintenance on existing chassis. It also suits electronics refreshes where a damaged or overly stiff lead needs to be exchanged for a 12 cm connection that is easier to place cleanly within the model. Warning! Not suitable for children under 14 years.
RC electronics
TBLE-01S Sensor Cable 160mm, RC motor lead
300054318€5.19
The TBLE-01S Sensor Cable 160mm is a dedicated RC electronics lead for sensored brushless setups, pairing a 160 mm cable length with matching end connectors for the link between controller and motor. It is designed for use with the Tamiya Brushless ESC 01 Sensored Type and the TBLM-01S series of Tamiya brushless motors, where the sensor connection supports the motor control system inside the vehicle. This separate cable set contains 2 pieces, giving a direct replacement when an existing lead is damaged or a second cable is needed for another compatible chassis layout. The bundled multi-wire construction keeps the run neat through the electronics bay, and the compact connector format suits installations where the ESC and motor sit at different points in the car. Tamiya also offers a 120 mm version, while this 160 mm version suits layouts that call for extra reach between the installed units. In workshop use, the cable can be routed between the mounted ESC and motor during a fresh build, a repair, or an electronics swap. It also fits as a spare kept alongside other RC maintenance parts, ready for quick replacement when a sensored drive system needs the correct connection lead. Warning! Not suitable for children under 14 years.
RC electronics
TBLE-01S Sensor Cable, RC motor accessory, 120 mm
300054317€5.19
The TBLE-01S Sensor Cable 120 mm is a dedicated RC electronics accessory for sensored brushless setups, linking the Tamiya Brushless ESC 01 Sensored with motors from the TBLM-01S series. Its 120 mm length gives a measured cable run for compact chassis layouts where the speed controller and motor sit near each other, keeping the sensor connection tidy and correctly matched to the installation. Each pack contains 2 cables, making it useful both as a replacement part and as a spare kept with workshop supplies for maintenance or rebuilds. The cable uses matching multi-pin plugs at both ends, with black insulated wiring gathered into compact connector housings. Strain relief sleeves near the plugs support the cable where repeated connection and removal place the most stress. This separate spare part mirrors the cable supplied with the compatible ESC, so an existing sensored system can be restored with the same connection type. In an RC car build, the 120 mm format suits installations that do not need extra slack between the ESC and motor. It can be fitted during a fresh electronics layout, kept in a pit box for service work, or used when replacing a worn lead in a compatible sensored drive system. Warning! Not suitable for children under 14 years.
RC electronics
TSU-04 Analog Servo, RC servo, drip proof
300045061€35.49
The TSU-04 Analog Servo brings compact RC control hardware into a drip-proof format built for model vehicle use. Its 40.0 x 20.0 x 37.0 mm housing and 41 g weight make it easy to place in chassis layouts where space, balance and clean linkage routing matter, while the attached lead and connector keep installation straightforward. At 6V, the servo delivers 4.0 kg·cm torque and a movement speed of 0.17 sec per 60°, giving steering or control systems a clear, direct response. The operating voltage range of 4.8V to 6.0V supports common RC electronics setups. The operating angle reaches more than 45° to one side, including neutral, which gives the output shaft usable travel for linkage geometry and horn positioning. A cross-shaped servo horn and a 2.6 x 8 mm tapping screw are included for attachment. Mounted in an RC chassis, the TSU-04 suits steering duties and other control tasks that rely on measured rotational movement through the servo horn. On mixed surfaces or in changeable weather, the drip-proof construction adds reassurance when a model meets spray or damp ground during a run. Warning! Not suitable for children under 14 years.
RC electronics
TSU-06 Digital Servo, low profile RC servo
300045065€62.99
The TSU-06 Digital Servo combines a low-profile layout with digital control in a compact RC component built for vehicle installations where space is limited. Its 40.0 x 20.0 x 26.0 mm housing and 26 g weight make it easier to place the servo in tighter chassis areas while keeping steering or linkage movement direct and controlled. This servo operates on 4.8 to 6.0V and reaches 3.5 kg-cm torque at 6V, giving compatible RC vehicle models a clear, mechanical response at the linkage. Operating speed is 0.1 sec/60° using 6V, and the operating angle reaches more than 45° to one side including trim, which supports practical steering travel in installation. The attached cable and connector link the servo to onboard electronics, and the supplied servo horn mounts on the splined output shaft with the included 2.6 x 8 mm tapping screw. Included spacers can be used to adjust attachment during installation. Drip-proof construction adds protection in running conditions with light moisture. When used as a steering servo, a servo saver is required. This servo is intended for RC vehicle models and cannot be used with Tamiya TEU-105BK and TEU-302BK ESCs.
RC electronics
TBLE-04S ESC Speed Controller for RC Models
300045069€73.99
The TBLE-04S is an electronic speed controller for RC ground models that combines sensored brushless precision with broad motor compatibility in a compact 47 g unit. By detecting rotor position, the controller feeds power more accurately to the motor, which helps deliver smoother response when accelerating, braking and changing pace through tight sections. Its operating range covers sensored brushless motors from 15.5 turns and brushed motors from 25 turns, with forward, brake and reverse functions built in. Input voltage is 6.6 to 7.2 V, and receiver output is rated at 6 V and 1.5 A. The housing measures 41.5 x 33.4 x 18 mm, making it easier to place alongside other onboard electronics in compact chassis layouts. Setup is handled through the set button and LED indications, with selectable reverse, battery cut-off and motor mode functions available through the controller itself. Overheat protection cuts power to the motor if the ESC becomes too hot and restarts automatically after cooling, while overload protection shuts the motor down when current demand rises too far. On the bench or at the track, that combination supports repeatable tuning sessions, cleaner throttle feel and controlled braking adjustments across different RC car builds.
RC electronics
TBLE-04SR ESC, RC speed controller, sensored
300045070€86.99
The TBLE-04SR ESC brings precise motor control to RC vehicle setups with sensored brushless operation that reads rotor position for smoother response and more efficient power delivery. Its compact 41.5 x 33.4 x 27 mm housing and 56 g weight including cables make it easy to place in chassis layouts where space and wire routing matter. This controller works with sensored brushless motors and also supports brushed motors from 23 turns upward, which opens the door to different drivetrain configurations within one electronics package. A cooling fan is mounted on the unit to support heat management during sustained running. The wired switch module and pre-fitted cables create a ready-to-install layout for hobby workbenches and race prep. It is compatible with Ni-Cd, Ni-MH and Li-Fe battery packs, covering several established RC power formats. On track, the 10-step neutral brake and 10-step brake adjustment allow deceleration to be tuned for tighter technical sections, flowing sweepers or repeated stop-and-go driving. Overheat and overload protection functions add a practical layer of control when sessions become demanding, whether the controller is fitted to a fresh build or used to update an existing RC car.
RC electronics
TLU-01 LED-Light Unit, RC lighting set, 5 mm LEDs
300053909€56.99
The TLU-01 LED-Light Unit adds working illumination to RC vehicle bodies with a compact control module, 2 white 5 mm LEDs for the front and 2 red 5 mm LEDs for the rear. The included wiring set creates a clean starting point for headlights and tail lights, giving touring cars, trucks or custom builds a more realistic presence when the body is mounted and powered. The control box provides 8 numbered connection ports, so the lighting layout can grow beyond the included 2 LED pairs. Additional LED pairs are available in white, red and orange, allowing the same unit to support extra headlamps, brake lights or indicator positions where the bodyshell design allows them. An EXT. connection on the module opens the way to linked control options, and with the TLU-02 control unit, 2 TLU-01 units can be operated together for more complex light effects such as pace car style patterns. A branch cable and cable clip are included to help organise the wire runs inside the shell. The set suits RC builds where lighting is part of the finish rather than an afterthought. During installation, the 5 mm LEDs can be placed at front and rear light positions, while the long lead wires give flexibility for routing through different body shapes and mounting points. Warning! Not suitable for children under 14 years.
RC electronics
TLU-02 Light Control Unit, RC lighting module
300053937soon available again
The TLU-02 Light Control Unit brings transmitter-linked lighting control to an electric radio control touring car, turning separately available LED lights into active signals that change with driving inputs. Headlights, position lights and fog lights can be selected for evening-style running, while brake lights, backup lights and blinkers respond through the control system for a more convincing road-car look. Beyond constant illumination, the module adds programmed effects that shift with vehicle behaviour. Hazard lights flash after the car stops, passing lights can be triggered for brief bursts, and acceleration can activate flashing sequences that give the body shell a more animated presence on the track. The unit also supports siren-like LED patterns, unidirectional flashing of 8 LED lights, and back-and-forth flashing of 8 LED lights. With 2 separately available TLU-01 units connected, the system can operate up to 16 LED sets, or 32 lights in total. The control layout is designed along lines similar to an ESC, which keeps installation logic familiar within many RC electronics setups. In a workshop build or a finished touring car refresh, the module opens up more detailed light behaviour than a fixed on-off arrangement. A transmitter, battery, TLU-01 unit and LED lights are required separately. Warning! Not suitable for children under 14 years.
RC electronics
TSU-05 Digital Servo, RC accessory, drip proof
300045062soon available again
The TSU-05 Digital Servo brings digital control, drip proof construction and compact RC fitment into one electronic component for steering and linkage tasks. With 4.0 kg*cm output torque at 6V and an operating speed of 0.17 sec/60 degrees at 6V, it combines controlled force with quick response when a model needs accurate movement through the servo arm. Its housing measures 40.0 x 20.0 x 37.0 mm and weighs 40 g, making it suitable for installations where space and component weight both matter. The operating angle reaches more than 45 degrees to one side, giving the output shaft a useful sweep for connected steering or control linkages. Power supply is rated for 4.8 to 6.0V, matching common RC electronics layouts. A gold-colored heatsink is fitted to the case, and the set contains 1 drip proof digital servo, 1 servo horn and 1 2.6 x 8 mm tapping screw for horn attachment. Mounted in an RC chassis, the TSU-05 can drive steering inputs through the splined output shaft and horn, translating electronic commands into mechanical movement at the linkage. It also suits other model control functions that rely on compact servo travel, stable voltage input and a clearly defined mounting format.
RC electronics for your models: quality from Tamiya
The right RC electronics are the heart of every successful RC model project. Whether you have an RC car, an RC truck, or another RC model – the appropriate electronics ensure perfect control and impressive effects. At Tamiya, we offer high-quality RC electronic components that take your model’s driving experience to the next level.
Our range of RC electronics
In our selection, you'll find a comprehensive range of RC electronic parts, specifically designed for Tamiya RC models. From lighting elements and speed controllers to digital servos – each component contributes to the performance and appearance of your model. Here, you can learn more about the possibilities our RC electronics offer.
LED lighting for realistic effects
Our LED components are the perfect choice to make your model more realistic. Whether headlights, LED cable holders, or LED control units – with our RC lighting electronics, you bring authentic looks to the road. Not only do the LEDs create an impressive appearance, but they also improve the visibility of your model, allowing you to drive safely even at dusk.
Speed controllers and multifunction units for full control
Electronic speed controllers are essential components for precise control of your model. With a high-quality speed controller, you can regulate speed precisely and get the best performance from your vehicle. Our multifunction units provide additional features such as light and sound effects – ideal for those who want to add even more realism to their model.
Precise control with digital servos
For exact control, our digital servos are indispensable. They are fast, reliable, and ensure that your RC truck or RC car remains controllable even in the most demanding situations. Tamiya's RC car electronics give you the ability to control your model precisely and perform all manoeuvres with the highest accuracy.
Why choose RC electronics from Tamiya?
Tamiya's RC electronic components are specifically designed for our RC models and offer the highest quality and reliability. Each part is easy to integrate and ensures optimal performance. With the right electronics, you can be sure that your model functions well and looks impressive. Our goal is to provide you with high-quality products that are perfectly tailored to your needs and bring lasting enjoyment. Ready to upgrade your model?