RC spare parts
Discover first-class RC spare parts from Tamiya. Screws, shock absorbers, drives and much more! If you want to find out more, you can read on here.
Other spare parts & accessories
10mm Shim Set, RC accessory, 0.1-0.3 mm spacers
300053588€13.49
This 10 mm shim set brings fine mechanical adjustment to RC chassis work, with 30 spacers sized at 10 mm inner diameter and 13 mm outer diameter for controlled spacing at shaft mounting points. The 3 thickness options of 0.1 mm, 0.2 mm and 0.3 mm make it possible to correct small gaps that can lead to unwanted movement in suspension or wheel axle assemblies. Instead of relying on a single washer size, the set gives stepped tuning options that suit different setup needs across on-road and off-road vehicles. Each shim can be placed to shift the position of a mounted part in small increments, including forward adjustment where the chassis layout calls for tighter spacing. That makes the set useful during maintenance, rebuilds and race-focused setup changes where alignment and reduced slippage matter. Scope of delivery: 1 spacer set with 30 pieces. On the bench, the assortment supports careful fitting of moving parts before a run. During a rebuild or handling-focused setup session, the different shim thicknesses help dial in cleaner spacing at the exact point where play needs to be reduced. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
1150 Ball Bearing Set, RC bearing pack, sealed
300053008€36.29
The 1150 Ball Bearing set brings a direct drivetrain upgrade to compatible RC chassis by replacing plain rotating points with sealed ball bearings. Each bearing uses rubber-covered sides and an 11 mm outer diameter, 5 mm inner diameter and 4 mm width, creating a compact format for hubs, axles and other moving assemblies where clean rotation matters. Installing ball bearings is a common first step when tuning running performance because they reduce drive loss and support smoother movement through the transmission. The sealed construction adds high dust resistance, which helps the bearings keep turning freely in regular road, buggy and track use. The pack includes 4 bearings for targeted replacement or routine maintenance on frequently used assemblies. Compatibility covers a broad list of chassis, including TD4, TD2, DF-02, DF-03, DT-02, DT-03, DT-03T, TT-02, TT-02B, TT-02D, TT-02RR, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02FT, TT-01D TYPE-E, TT-01 TYPE-E, M-05, M-05 PRO, M-06, M-06 PRO, M-07 CONCEPT, M-08 CONCEPT, MF-01X, RM-01, TB-04, TB-04 PRO, TRF101, TRF102, TRF103, F103GT and F104 Ver.II PRO. On a workshop bench, the 4-piece set suits regular servicing before the next run or a focused upgrade on a fresh chassis build. Once fitted, the bearings support freer rotation in the moving parts that shape how efficiently the model puts power down. Warning! Not suitable for children under 14 years.
Axes & drive shafts
12 mm Wheel Hub Hexagon Set, RC chassis accessory
300053056€10.59
This 12 mm wheel hub hexagon set brings a clean aluminium upgrade to the wheel mounting area on a wide range of RC chassis. The pin-type design pairs each hex hub with a matching pin, creating the interface that transfers drive from the axle to the wheel while keeping the fit consistent during assembly, maintenance and parts replacement. The scope of delivery includes 4 wheel hub hexagons and 4 pins. The aluminium construction gives these small drivetrain parts a crisp machined look, and the 12 mm hex format matches the standard wheel mounting size used across many compatible on-road and off-road platforms. Fitment listed in the data covers CR-01, DF-03, DF-02, DT-03, DT-03T, DT-02, F103GT, M-06, M-06 PRO, M-05, M-05 PRO, M-05 ver.II PRO, MF-01X, TT-02B, TT-02FT, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. For workshop stock, rebuilds or replacing worn wheel mounting parts, this set covers one full chassis with 4 matching hubs and pins. It suits bench work where exact chassis compatibility matters and keeps the wheel mounting hardware aligned with the specified 12 mm standard used by the listed platforms. Warning! Not suitable for children under 14 years.
Gears & motor pinions
19T Pinion Gear, model accessory, M0.6
303505049€5.69
This 19T pinion gear is a compact drivetrain part for model applications that use module M0.6 gearing. Its 19 straight teeth mesh with the matching gear stage to pass motor rotation into the transmission, making it a functional choice when a specific tooth count is needed in the drive layout. The dark metal gear body is shaped for shaft mounting, with a central round bore and a side set-screw hole visible on the part. The top surface is marked with 19, which helps distinguish this version from other tooth counts during maintenance or parts sorting. As a small mechanical component, the pinion sits at the point where motor output meets the rest of the drivetrain, so the tooth count directly relates to the gearing combination used in the model. It fits naturally into workshop tasks such as replacing a worn pinion, restoring a compatible drivetrain, or keeping a matching spare ready for service intervals. On the bench, the compact form and visible marking make it straightforward to identify alongside other transmission parts and gearing options. Warning! Not suitable for children under 14 years.
Gears & motor pinions
20/21T Pinion Gear Set, RC motor accessory, aluminum
300050356€9.99
This 20/21T Pinion Gear Set is a compact drivetrain upgrade for compatible RC chassis, pairing 2 aluminum pinions with 2 grub screws for secure mounting on the motor shaft. The 20-tooth and 21-tooth options give a clear gearing choice when replacing worn parts or adjusting the drive layout for a specific chassis setup. The machined aluminum construction keeps the focus on precise tooth engagement and clean fitment in model drivetrains that use module 0.6 gearing. One pinion is marked 20 for quick identification during setup, which helps separate the two ratios at the workbench. The set is intended for a wide spread of Tamiya platforms including M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02CB, GF-01, GF-01TR, GF-01CB, G6-01, G6-01TR and TB-05 PRO. It also supports CC-01 with 20T only, plus TA06, TA06 PRO, TA06 MS and TC-01 with 21T only. Additional chassis-specific notes are defined for several applications: DF-02 is used with 53703, F104PRO II is used with 51609, and TA07 MS is used with 51356, 51423 and 51548. That makes the set a practical spare or tuning part for keeping compatible RC cars running with the correct motor pinion combination. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
2mm C-Ring-Set, model accessory, 8-piece
300084171€2.19
This 2 mm C-Ring-Set supplies 8 matching retaining clips for model maintenance, repair work and parts replacement. The compact format suits assemblies that use small fastening points, where a C-shaped ring locks into a groove on a shaft or similar mounting point to hold parts in position. The set groups identical metal clips together, which helps when a rebuild calls for consistent replacement parts rather than mixed hardware. The open centre cutout allows each ring to snap into place on the intended fitting, making this type of fastener useful wherever a low-profile retainer is needed in a mechanical model assembly. The silver-coloured finish also makes the pieces easy to identify in a parts tray or workshop setup alongside screws, washers and other small hardware. Used as spare parts, these C-rings support routine servicing, careful restoration work and the replacement of missing retainers in existing builds. Kept in a hobby drawer, the 8-piece pack provides a practical stock of matching clips for future workshop tasks on compatible model mechanisms. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
2mm E-Ring Satz, model accessory, 15 pieces
300050588€3.09
This E-Ring Satz provides 15 matching retaining clips in a 2 mm size for model maintenance, repairs and mechanical assembly work. Each E-ring is made as a small stamped metal fastener that presses onto a grooved shaft or axle from the side, where it acts as a stop to hold mounted parts in place. The flat clip profile keeps the fastening point compact, which is useful in tight spaces around driveline and wheel assemblies. The pack suits jobs where worn or missing retaining hardware needs a direct replacement in the correct size. A 2 mm E-ring can be used wherever the assembly calls for this specification, including axle or shaft setups that carry gears, bushings or wheels. The 2 mm thickness stated in the data adds a clear reference point when matching spare hardware to an existing build. With 15 identical pieces in one set, the supply supports repeated service work and keeps consistent hardware ready for future rebuilds. On the workbench, these clips fit naturally into parts sorting trays, spare hardware boxes and routine maintenance kits for RC and scale model projects. They are especially useful when a rebuild calls for several matching retainers across multiple connection points or when a small clip needs quick replacement after disassembly. Warning! Not suitable for children under 14 years.
Screws & ball head screws
2mm/M2 Lock Nut Mini 4WD hardware set
300094690€4.99
This hardware set brings 10 compact M2 lock nuts into Mini 4WD maintenance, repair and fresh assembly work. The 2 mm format suits small threaded connections, while the lock-nut construction with a nylon insert ring is designed to hold more firmly once tightened, a useful detail on fast-moving model assemblies where vibration can work against standard fasteners. The close-fitting hex shape supports careful tool use on small parts, and the metal finish gives each nut a clearly defined edge during installation. Keeping matching M2 hardware together also helps maintain a consistent fit across repeated rebuilds, part swaps and setup changes. Because the pack contains 10 pieces, it covers multiple fastening points and leaves spares ready for later workshop use. The set is focused, simple and specific: small fastening hardware for Mini 4WD systems where the right thread size matters. On the bench, these lock nuts suit routine replacement after wear, rebuilding a chassis with fresh hardware, or keeping spare fixings ready in a parts box between race-day adjustments. They also fit neatly into a regular stock of model workshop essentials, alongside the screws, shafts and brackets used in ongoing Mini 4WD upkeep. Warning! Not suitable for children under 14 years.
Screws & ball head screws
2x8mm Differential Tapping Screws, model spare set
300050573€3.29
This spare screw set focuses on one specific workshop need: 10 matching 2x8 mm differential self-tapping screws for compatible model maintenance and repair. The uniform size keeps replacement work consistent when original fasteners are worn, missing or set aside during a rebuild, and the metal construction suits repeated use in model assembly tasks where a precise screw type matters. The domed heads use a crosshead drive, allowing the tool to seat cleanly during installation and removal. A fully threaded shaft is suited to fastening duties where the thread needs to bite along the full length of the screw rather than only near the tip. Because all 10 screws share the same format, the set supports organized parts storage and avoids mixing unmatched hardware into a differential assembly. The pack contents are stated plainly: 10 differential self-tapping screws. On the bench, this set fits naturally into routine servicing, replacement of lost fasteners, or preparation of spare hardware before a rebuild begins. It also works as a practical stock addition for model toolboxes and parts drawers, where a clearly defined 2x8 mm screw can save time during maintenance on compatible assemblies. Warning! Not suitable for children under 14 years.
Screws & ball head screws
2x8mm Hex C-sunk Head Tapping Screw, model screws
319804477€5.99
This pack contains 10 hex C-sunk head tapping screws in a 2x8 mm size for model building, maintenance and parts replacement. The countersunk head sits into a matching recess so the fastening point stays level with the surrounding surface, which is useful where body panels, brackets or other fitted parts need a neat finish. The tapping design forms its thread directly in the receiving material during installation, making these screws suitable for compatible model assemblies that use self-tapping hardware. The 2 mm diameter and 8 mm length place them in the small-format hardware range used for detailed fastening jobs, and the hex head gives a defined drive point for controlled fitting. As workshop stock, a 10-piece pack helps keep replacement fasteners on hand when a build is interrupted by missing or worn screws. These screws fit naturally into bench tasks such as replacing lost hardware, refreshing older assemblies or securing parts during a rebuild. In regular model maintenance, having the same head style and size ready can keep repairs consistent across compatible sections of a project. Warning! Not suitable for children under 14 years.
Axes & drive shafts
37mm SwingShafts, RC spare part for XV-02
300051700€16.19
These 37 mm SwingShafts are a focused RC spare part for keeping compatible chassis setups running cleanly and consistently. Designed for the XV-02 chassis, they replace worn swing shafts in the assembly universal area, where accurate fit and free movement matter to drivetrain response and stable operation during repeated running sessions. Each shaft is marked A • 37 and the set supplies 2 matching parts for the same specified length. The black rod form with metal inserts at both ends reflects the compact mechanical role these parts play inside the chassis assembly. On TT-02 based cars, the shafts can also be used alongside Item 54623 and 51444 for defined compatibility. Combined with Item 54874, they also allow a wider camber angle adjustment range on the TT-02 chassis, opening more setup latitude for fine tuning suspension geometry. This kind of replacement suits regular workshop maintenance, rebuilds after heavy use, or planned setup changes between chassis configurations. In a tuning session, fresh shafts can restore precise movement in the relevant assembly area, while in a parts box they serve as a chassis-specific option for XV-02 and selected TT-02 builds.
Axes & drive shafts
39mm Drive Shaft Set, RC spare part for TT-01E
300050883€12.99
This RC spare part set provides 2 drive shafts in a 39 mm format for selected Tamiya chassis. Designed for TA-01, TA-04, TA-05 and TT-01E platforms, the shafts sit in the drivetrain where rotating assemblies need a compact link that can keep transmitting power while suspension parts move through their travel. Each shaft uses a straight center section with rounded ends and cross pins, a dogbone-style layout commonly used to connect outdrives and wheel-side drive components. That shape allows the shaft to articulate inside the drivetrain rather than acting as a fixed rod, which matters when a chassis is cornering, accelerating or running over uneven surfaces. The 39 mm dimension is the key fit point here, so matching the stated length is essential when replacing worn or missing drivetrain parts. Supplied as a 2-piece set, the pack suits paired servicing work without forcing a mixed left and right setup. In workshop use, these shafts fit naturally into rebuilds, maintenance sessions and parts-box planning for compatible touring car chassis. They also make sense as a trackside spare when a running session calls for a quick drivetrain refresh on TA-01, TA-04, TA-05 or TT-01E based models. Warning! Not suitable for children under 14 years.
Gears & motor pinions
39T Ring Gear XV-02/TT-02 GD, RC spare parts
300051695€6.39
This RC spare parts set centers on a 39T ball differential ring gear and a 15T bevel pinion gear for XV-02 and TT-02 chassis cars. The matched gear pairing supports the differential drive path where torque changes direction through the bevel teeth, making it a focused replacement choice for drivetrain maintenance on compatible models. Alongside the 2 gears, the set also provides a differential case and a gasket. That combination covers the main housing and sealing elements around the gear area, so service work can address more than a single worn tooth or damaged gear face. The square center opening on the bevel pinion and the mounting pattern on the ring gear are shaped for their intended assembly points, while the gasket sits between housing parts where a clean fit matters. As a dedicated spare parts pack, the set is aimed at repair, rebuild, or routine drivetrain upkeep rather than general customization. On the bench, these parts suit planned maintenance after repeated running sessions or a targeted differential rebuild on an XV-02 or TT-02 chassis car. The separate components also make it easier to replace the affected drivetrain section with matching parts from one set instead of sourcing each piece individually.
Other spare parts & accessories
3mm 5.5x5.0mm Spacer, model accessory, 10-pack
319804641€8.19
This spacer set is built around exact measurements that matter during model maintenance and parts replacement. Each piece is specified at 3 mm with 5.5 x 5.0 mm dimensions, giving a clear reference for assemblies that rely on this format to maintain the intended spacing between compatible components. The set contains 10 matching spacers, which supports repeated service work without mixing different sizes in the same build. The defined dimensions make this set useful when an existing assembly already calls for 3 mm spacers and when consistent fit across several mounting points is needed. Rather than relying on approximate sizing, the stated 5.5 x 5.0 mm format gives a direct basis for checking compatibility against the parts already in use. On the workbench, these spacers suit routine maintenance, measured replacement and keeping spare hardware ready for future adjustments. The 10-piece count also helps when several identical positions in one assembly need the same spacer size, or when matching replacements are kept in reserve for later servicing. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3mm O-Ring black, model accessory, 10-piece
300084195€1.99
This 10-piece pack of black 3 mm O-rings adds a practical spare-parts supply for model maintenance, repair work and small mechanical assemblies. Each ring shares the same compact diameter and circular form, making the set useful wherever a matching seal or replacement ring is needed to restore fit between moving or joined parts. The pack contains 10 identical rubber O-rings, which helps keep replacements consistent across repeated service jobs instead of mixing unmatched sizes. Their black finish makes them easy to distinguish from other small workshop parts during sorting and storage. In model building and accessory upkeep, small sealing components often matter as much as larger visible parts, especially when a worn ring needs a direct like-for-like swap rather than an improvised substitute. Kept in a parts drawer, tool case or bench organiser, these O-rings are ready for routine maintenance sessions and quick repairs. The uniform 3 mm format also suits builders who prefer to keep duplicate consumable parts available before starting detailed assembly or servicing work. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3mm Shim-Set, RC spacer set, 0.1/0.2/0.3mm
300053585€11.29
The 3mm Shim-Set brings precise spacing control to RC car maintenance with 30 thin washers sized for 3 mm shafts. Each shim has a 3 mm inner diameter and a 5 mm outer diameter, making the set a practical choice for fine adjustment at suspension and other attachment points where excess movement can affect fit. Inside the set are 10 shims each in 0.1 mm, 0.2 mm and 0.3 mm thicknesses. That spread allows small, deliberate changes instead of forcing a single spacing value onto every location. On 3 mm suspension shafts, the shims can be placed to take up unwanted slack and refine how connected parts sit against one another. The ring format keeps the adjustment focused on the shaft position itself, which is useful when tuning linkage or suspension areas that react to very small dimensional changes. For workshop use, the set suits routine maintenance, chassis rebuilding and targeted setup corrections on many Tamiya RC cars. A builder can test one thickness, stack combinations where needed, and match the spacing to the exact attachment point rather than replacing larger components. The scope of delivery contains 1 spacer set with 30 pieces. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3mm Washer MA14, model accessory, 15-piece set
300050586€3.09
This MA14 washer set brings a straightforward supply of 15 matching 3 mm washers to the workbench, supporting model maintenance, replacement tasks and assembly jobs that call for correctly sized small hardware. The compact format suits builders who need a ready reserve for routine parts handling rather than a mixed assortment. Each washer is identified in the data as 3 mm Washer and grouped under Models Supplies, placing it clearly in the spare-parts and workshop-accessory side of model building. The 15-piece count gives a practical quantity for keeping common hardware on hand during repairs or when an existing build needs fresh fastening components. The MA14 reference helps distinguish this set from other small parts in a broader workshop stock, especially where several washer sizes may be stored together. On the bench, a dedicated washer pack like this supports cleaner preparation before assembly starts and quicker replacement when a small part is missing during maintenance. It also fits neatly into organised spares storage, where size-specific hardware can be sorted by reference and reached quickly for the next build session.
Other spare parts & accessories
3x0.7mm Aluminum Spacer Set, model accessory
309805645€6.29
These aluminum spacers in 3x0.7 mm format support accurate spacing in detailed model assembly, where a defined gap can influence fit, alignment and component position. The 10-piece pack gives a ready supply for workshop drawers, replacement needs or builds that use several matching spacers in one setup. The 3 mm size and 0.7 mm thickness make this set suited to fine adjustment work rather than broad structural filling. In model construction, spacers like these sit between mounted parts to create consistent separation and help maintain the intended position of screws, brackets or other fitted elements. Aluminum brings a clean, technical finish to this small but useful hardware format and fits naturally into precision-focused hobby work. Whether used during a fresh build, a repair or a measured setup change, the defined dimensions make selection straightforward when a specific spacing value is needed. Kept in a parts box or bench organizer, the set adds a practical option for builders who work through detailed fitting tasks one measured step at a time. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x10 Tapping Screw BK, model screw set, 10 pcs
309804392€6.19
This screw set supplies 10 black 3x10 tapping screws for model assembly, replacement work and workshop stock. The compact format suits builders who need the exact fastener type stated on a parts list or want matching hardware ready for routine maintenance on compatible models. The 3x10 specification gives a direct reference for size, which helps when sorting spare hardware for repairs or preparing parts before a build begins. The black finish supports a uniform appearance on visible fixing points where darker hardware is preferred. As tapping screws, these fasteners are intended for fastening duties in suitable model applications where this screw type is required. The pack count of 10 pieces provides a practical quantity for replacing missing screws, refreshing used fixings or keeping a small reserve in the workshop. On the bench, this set fits naturally into regular maintenance tasks such as securing parts after disassembly or replacing worn hardware during a rebuild. It also works well as a dedicated spare pack kept alongside model tools and sorted fasteners, ready when the correct 3x10 tapping screw is needed. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3x10mm Alum. Turnbuckle Shaft, chassis accessory
300053892€11.99
These 3 x 10 mm aluminium turnbuckle shafts bring precise anti-roll bar adjustment to compatible chassis setups while adding a clear blue finish to the hardware. The set contains 4 shafts and is intended as a chassis accessory for fine tuning left and right anti-roll bar settings without removing the adjuster. The compact 3 x 10 mm dimensions suit dedicated on-road racing platforms where small setup changes matter. As a replacement for 9804250, this set gives a direct route to refreshing existing hardware with the same stated function. Compatibility is listed for TRF415MSX, TRF415MS, TB Evo. IV MS and TB Evo. IV. TA05 fitment is also specified, with the condition that adjusters must be shortened. At the workbench, these shafts support quick setup changes between runs when anti-roll bar balance needs a finer response. In regular maintenance, the 4-piece pack also helps keep a matching set ready for rebuilds, repairs or chassis-specific spares within a race box. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x10mm Steel CS HexHead Screws, model hardware
300051629€2.89
These 3x10mm Steel CS HexHead Screws are replacement model hardware for fastening points that require a countersunk head and a hex socket drive. The steel construction and fully threaded shafts support firm seating in compatible assemblies, while the black finish matches the clean, technical look often used in model components. Each screw uses a flat tapered head that sits flush when installed in the correct countersunk opening, which helps maintain proper part alignment on compatible builds and repairs. The 3x10mm size is the key fit detail for matching existing hardware, and the pack of 10 gives a ready supply for workshop drawers, routine servicing or targeted replacement of missing fasteners. The hex socket head is designed for secure tightening with the appropriate tool, making it suitable for controlled maintenance work where a precise fit matters. Used as spare hardware, these screws suit regular upkeep on compatible model vehicles and assemblies that call for this exact specification. They can be kept on hand for repair sessions, rebuilds or scheduled parts replacement, especially when worn fasteners need to be changed before they affect how connected parts stay in place.
Screws & ball head screws
3x10mm Steel Hex Head Screws, model hardware
300051628€2.89
These 3x10 mm steel hex head screws bring precise fastening to model maintenance, repair and assembly work. The steel construction and threaded shaft support a firm hold in compatible mounting points, while the hex socket head is shaped for secure tool engagement during tightening and removal. With 10 matching screws in the pack, this hardware set suits routine workshop stock as well as targeted replacement jobs on frequently serviced models. The 3 mm diameter and 10 mm length provide a clearly defined format for builds and repairs that call for this exact screw size. The rounded button-style head sits neatly against mounted parts, and the fully threaded shaft is suited to fastening tasks where even thread contact matters across the full length. On the bench, these screws fit naturally into rebuilds, part swaps and general upkeep between running sessions. Keeping the correct fastener size close at hand helps avoid delays when worn or missing hardware needs to be replaced, and a matching 10-piece set makes it easier to maintain consistency across repeated service work.
Screws & ball head screws
3x12mm Counter Screw, model screw set, 10 pieces
300050581€3.29
This screw set provides 10 matching countersunk screws in a 3 x 12 mm format for model assembly, maintenance and hardware replacement. The flat countersunk head supports a flush finish on compatible parts, which helps keep surfaces even where protruding fasteners would interfere with fit or movement. The set is supplied as metal fastening hardware and suits tasks that call for the same stated size across several fixing points. A 12 mm length gives reach through compatible layered parts, while the 3 mm diameter defines the thread size for matching holes and receiving material. Because all 10 screws share the same format, the pack works well for replacing lost fasteners in groups rather than mixing different sizes during a repair. The pointed threaded shafts are shaped for fastening use, and the Phillips drive allows controlled tightening with a matching screwdriver. On the workbench, the set supports routine upkeep of model builds, spare-parts sorting and planned rebuilds where identical hardware is needed across several positions. It also fits neatly into parts storage for future service jobs, keeping a clearly specified screw size ready when a compatible assembly calls for 3 x 12 mm countersunk fixings. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x12mm Steel CS HexHead Screws, model accessory
300051631€2.79
These 3x12mm Steel CS HexHead Screws are a focused workshop accessory for maintaining compatible model and RC assemblies. The steel construction provides the specified material for replacement use, while the countersunk screw form is made to sit into matching recessed mounting points for a flush finish. Each screw uses a hex head, giving a defined tool interface for secure tightening during fitting and servicing. The pack contains 10 screws, which makes it useful for routine maintenance, repair work, or keeping matching fasteners ready in the parts box. The 3x12mm size is the key reference for checking compatibility with the intended assembly point, especially where the original build calls for the same thread and length. As replacement hardware, these screws are suited to restoring firm connections after wear, loss, or repeated disassembly during setup changes and repairs. On the workbench, they fit naturally into regular service tasks such as refreshing mounting points on a chassis, reattaching compatible sections, or replacing individual fasteners before the next run. For model builders who keep spare hardware sorted by size, this 10-piece set adds a clear, easy-to-store option for ongoing maintenance. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x12mm Steel Hex Head Screws, model hardware
300051630€2.89
These 3x12mm steel hex head screws are small but essential model hardware for keeping compatible assemblies firmly fastened. The steel construction and hex head shape support a secure connection at fastening points where a precise fit matters, whether replacing worn screws or completing routine maintenance on a model car. Each screw measures 3x12mm and uses a fully threaded shaft, making the set useful wherever that exact size is required. The pack contains 10 matching screws, giving enough hardware for several mounting points or for keeping spares on hand in a workshop drawer or parts case. The silver metallic finish matches the straightforward function of workshop hardware and makes each screw easy to identify among other small components. On a repair bench, during a rebuild, or while refreshing frequently used running gear, replacement fasteners help keep compatible model sections properly attached. This set suits regular upkeep of model vehicles and other assemblies that use the same screw format, with the hex head allowing controlled tightening during fitting and replacement work.
Screws & ball head screws
3x14 mm Step Screw, spare part for TT-01 TA-01
300050582€3.39
This spare part set supplies 5 step screws in a 3x14 mm format for TT-01 and TA-01 model applications. The defined dimensions support a direct hardware match where this specific fastener size is required, whether a missing screw needs replacing or an existing build needs the correct fitting part restored. Each screw has a stepped profile that combines a rounded head, a smooth shaft section and a ribbed lower section. That shape suits fastening points designed for this hardware style and helps maintain the intended connection between compatible model parts. With 5 matching screws in one pack, the set covers small repair jobs and routine workshop replenishment without mixing different sizes. On the bench, these screws suit rebuilds, maintenance sessions and parts sorting for ongoing chassis care. The compact 3x14 mm specification also makes the set practical as reserve hardware for TT-01 or TA-01 projects where the correct screw type needs to stay close at hand. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x15mm Tapping Screw, model accessory, 10-pack
300050583€3.39
This 10-pack of 3x15 mm tapping screws is a focused workshop spare for model maintenance, repairs and ongoing assembly needs. The exact 3x15 mm size gives a clear match point when worn, missing or damaged fasteners need to be replaced with the same format, and the TA-01 and TA-02 designation identifies the intended application directly in the part name. The set consists of 10 silver metal screws with a threaded shaft, rounded pan head and cross-head drive as shown in the product image. That head shape supports secure seating against the mounted part, while the cross-head recess allows controlled tightening with a suitable screwdriver. Keeping identical screws together in one pack helps maintain a consistent fit across the relevant fixing points instead of mixing different lengths or thread types during service work. On the bench, this kind of hardware is useful for routine chassis upkeep, replacing lost fasteners after disassembly, or keeping matching spares ready between rebuilds. For TA-01 and TA-02 based model work, the pack offers a straightforward way to restore the specified fixing point with the correct screw format.
Axes & drive shafts
3x23mm Turn-Buckle Shaft, RC spare part, 4 pcs
309805780€4.69
This set of 4 turn-buckle shafts in 3x23 mm format adds a precise replacement option for RC model maintenance and setup work. The metal shafts are threaded on both ends and use a compact central section that supports handling during installation, removal and adjustment inside a linkage assembly. Used in steering or similar connection points where exact length matters, turn-buckle shafts allow the assembly to be tuned by changing the effective linkage position rather than replacing the whole mechanism. The 3x23 mm specification is the key fit detail for matching an existing compatible build, and the pack of 4 provides a practical quantity for servicing paired linkage points or keeping matching spares on hand. The dark metallic finish and cleanly cut threads reflect the functional, workshop-focused character of the part. These shafts fit naturally into bench work such as replacing worn connectors, refreshing a running chassis or preparing a model for its next setup session. In a parts box, pit case or hobby drawer, a matched set of 4 helps keep compatible RC assemblies ready when a linkage needs a fast, like-for-like swap. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x5mm Flathead-Screw, model screw set, Phillips
300051211€2.89
This screw set supplies 5 matching 3 x 5 mm flathead fasteners for model building, maintenance and hardware replacement. The compact size and crosshead design make the screws easy to identify at the bench, while the flat head sits neatly against compatible parts for a clean, flush connection. Each screw has a Phillips-style drive and a short machine thread, as shown by the defined head shape and threaded shaft. That combination suits small fastening points where controlled tightening matters and where oversized hardware would interfere with surrounding parts. The set is useful when an original screw is lost during assembly, when worn hardware needs replacing, or when a matching group of fasteners is needed for a repair. The black finish keeps the hardware visually understated on many technical builds. On a workbench, these screws fit naturally into routine model care: securing a bracket, refitting a cover, or restoring a connection after disassembly. Kept alongside other spare hardware, the 5-piece pack provides a practical reserve for compatible model sections that call for the same 3 x 5 mm format. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x6mm Steel CS HexHead Screws, model hardware
300051625€2.89
These 3x6mm Steel CS HexHead Screws provide compact fastening hardware for model maintenance, repairs and fresh assembly work. The steel build pairs a countersunk head with a hex socket drive, so each screw can sit flush in a matching recess while allowing firm, controlled tool engagement during installation. In the pack are 10 matching screws, shown with a dark metal finish and short threaded shafts suited to precise mounting points. The 3x6mm size makes this hardware relevant wherever that exact thread and length are specified in a compatible model or accessory assembly. A countersunk head is used where the screw needs to settle into the surface rather than stand proud, which helps preserve clean part alignment around plates, brackets or other fitted sections. The hex socket format also reduces the chance of slipping compared with a simple slotted head when careful tightening is needed on small-scale assemblies. These screws fit naturally into routine workshop tasks such as replacing worn fasteners, securing parts after servicing, or keeping spare hardware on hand for future adjustments. On RC cars and other model builds, timely replacement of damaged mounting hardware helps maintain consistent fit at the fastening point and supports reliable running after repeated use. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x6mm Steel Hex Head Screws, model accessory
300051624€2.89
These 3x6 mm steel hex head screws are replacement fastening hardware for model maintenance, repair and parts changes. The steel construction and internal hex drive support secure tightening with a matching tool, while the compact size suits smaller mounting points where consistent hardware dimensions matter. Supplied as a set of 10, they provide a practical stock of matching screws for workshop drawers, pit boxes or spare-parts cases. The rounded head shape and fully threaded shaft are suited to refitting components that rely on small, uniform fasteners. When an original screw is worn, lost or damaged, replacing it with the same 3x6 mm format helps preserve the intended fit at the fixing point. The dark metal finish keeps the set visually consistent, and the identical sizing across all 10 pieces simplifies sorting and selection during repair work. On a workbench, these screws suit routine servicing, rebuilds and hardware replacement on model assemblies that call for this exact size. They are also useful to keep on hand as spare fastening hardware, ready for quick swaps when a repair should not be delayed by a missing screw. Warning! Not suitable for children under 14 years.
Screws & ball head screws
3x8mm Steel CS HexHead Screws, model hardware
300051627€2.89
These 3x8mm Steel CS HexHead Screws are model hardware for maintenance, repair and replacement work on compatible assemblies. The steel construction and countersunk head shape suit mounting points where the screw needs to sit flush with the surface, while the hex socket is designed for controlled installation with an Allen key style tool. The set contains 10 matching screws, making it useful for replacing lost fasteners or refreshing worn hardware in one go. Each screw combines a threaded shaft with a countersunk profile, a format often used where clean seating and secure fastening matter to the fit of surrounding parts. In regular workshop use, spare hardware like this helps keep a build mechanically consistent instead of mixing different screw types or sizes. The 3x8mm specification gives a clear reference when matching existing fittings on a compatible model. Kept in a parts box, the set is ready for routine servicing, rebuilds or targeted repairs after wear. It also suits bench work where a damaged fastener needs to be exchanged quickly so the assembly can return to proper running condition.
Screws & ball head screws
3x8mm Steel Hex Head Screws, model accessory
300051626€2.89
These 3x8 mm steel hex head screws are a compact spare parts accessory for model maintenance, repair and ongoing workshop use. The steel construction provides the stated material specification, while the hex socket head is shaped for controlled tightening with the matching driver. In the pack, 10 matching screws are supplied for direct replacement where the same size and head type are required. The 3x8 mm measurement gives a clear reference for fit when replacing worn or missing hardware on compatible assemblies. Their machine screw form suits fastening points that rely on threaded metal hardware rather than clips or push pins. The internal hex drive helps apply torque through the center of the head, which is useful when working in small spaces common to model chassis and related components. As a spare parts set, the focus stays on restoring the original fastening function with the correct format rather than adapting a different screw type. In regular bench maintenance, a set of matching screws helps keep repairs consistent across repeated fastening points. For RC car servicing and rebuild work, timely replacement of worn hardware can help maintain proper assembly and keep compatible vehicles running as intended.
Screws & ball head screws
4 mm Adjuster M2, model accessory, 6-piece set
300050633€3.19
This 4 mm Adjuster M2 pack provides 6 matching ball pans for model maintenance, repair work and fresh assemblies that call for the same connection part throughout a linkage setup. The compact shape and M2 specification make the set a practical choice when worn or missing joint pieces need to be replaced with matching components. Each ball pan is supplied as a separate small part, so the pack can support several connection points in one project or stay on hand as workshop spares for later servicing. The 4 mm dimension gives a direct reference when matching existing hardware, while the uniform off-white moulded finish helps keep the parts easy to identify among other small model components. Scope of delivery: 6 ball pans. This set suits bench repairs, routine parts replacement and planned builds where identical linkage fittings are required across the assembly. It also works well as a stock spare for model toolboxes and hobby drawers, ready for the moment a control connection or adjuster point needs the same M2 and 4 mm format again. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4 mm Flange Lock Nut, model hardware, 4 pcs.
309805557€3.99
This set of 4 mm flange lock nuts brings secure fastening to model maintenance and mechanical assembly work. Each metal nut pairs a hex outer shape with a built-in flange and a nylon insert, creating a self-locking connection that helps threaded joints stay in place when vibration and repeated movement are part of the job. The flange base supports a broader contact area than a standard nut alone, which can be useful where mounted parts need even clamping across the surface. The nylon ring inside the thread adds friction as the nut is tightened onto a matching bolt, so the connection resists backing off during running, transport or repeated handling. With 4 pieces in the pack, the set suits small repairs, hardware replacement and keeping spare fasteners ready at the workbench. The silver metal finish also makes the parts easy to identify among mixed model hardware. Used on model vehicles, mechanical linkages or general hobby assemblies, these lock nuts fit naturally into routine service tasks where dependable retention matters. They are a practical choice for replacing missing hardware, refreshing older builds or stocking essential workshop spares for future adjustments. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4 mm Serrated Wheel Nuts, model accessory, steel
300042282€4.19
These 4 mm serrated wheel nuts are made for compatible 1:10 models and bring a clean, functional solution to wheel mounting and replacement work. The steel construction gives each nut the solid threaded form needed for repeated fitting, while the serrated base increases contact at the mounting point when tightened. In the workshop or at the track, that combination supports a firm connection between wheel and axle hardware. The set contains 8 wheel nuts, making it useful for complete wheel swaps as well as keeping matching spares ready for service intervals. The compact format suits routine maintenance jobs where lost or worn fasteners need to be replaced with the correct size. The metallic finish and flanged nut shape match the hardware style commonly used on model vehicle wheel hubs, and the threaded interior is designed for direct fastening rather than decorative use. As a dedicated accessory part, this set focuses on one specific task: securing wheel assemblies with the correct 4 mm steel nut. On a repair bench, the 8-piece count supports organized replacement across multiple corners of a chassis. During rebuilds or setup changes on compatible 1:10 models, the serrated contact face helps the nut seat with a more positive mechanical hold as the wheel is fitted and tightened. Warning! Not suitable for children under 14 years.
Axes & drive shafts
44mm TRF L.F. Drive Shafts, RC spare part
300042362€22.49
These 44 mm TRF L.F. drive shafts are built for double cardan joint drivetrains that use swing shaft caps from Item 54921. The steel construction and fluorine surface coating focus on two key demands in RC driveline tuning: controlled movement at the joint and reduced friction where the shaft is working under load. Supplied as 2 matching shafts, the set supports a balanced left and right installation in compatible chassis layouts. A key update is the 10.8 mm needle pin section, which is 1 mm longer than on previous shafts. That extra length is specified to get more from swing shaft cap option parts, making these shafts a targeted upgrade for builders refining a double cardan setup rather than changing unrelated areas of the car. The LF44 marking shown on the shafts helps identify the part during maintenance or when several driveline options are kept in a pit box. In workshop use, these shafts suit rebuilds after wear, planned driveline updates, or a fresh parts selection for a compatible competition chassis. They are best matched with the stated cap system, where the longer pin section and low-friction coating can be used as intended in the assembled transmission layout.
Axes & drive shafts
45mm Drive Shafts, TRF421 spare part set
300042387€18.99
These 45 mm drive shafts for TRF421 are a focused drivetrain spare for model car maintenance, supplied as 2 matching parts for Low Friction Double Cardan Joint Shafts. The dark metal shafts are marked LF45 and use a straight shaft form with joint ends shaped for the matching assembly. At the shaft end, each part uses a 10.8 mm needle pin. This detail is specified to work together with Item 54921 Reinforced Swing Shaft Caps, with 2 pieces each for front and rear fitment. The compatibility note is narrow by design: these shafts are only for cars that use Item 54921, which keeps the replacement choice tied to the correct drivetrain layout instead of a broad universal fit claim. As a spare part set, the pair supports maintenance after wear in the transmission area and restores the intended shaft length of 45 mm on both sides. The 2-piece format suits workshop stock, scheduled rebuilds and targeted repairs on a TRF421 setup. In a bench session, the matched pair helps keep the drivetrain specification consistent when replacing both corresponding shafts in the same assembly. Warning! Not suitable for children under 14 years.
Axes & drive shafts
46 mm TRF Swing Shafts, RC accessory, aluminium
300051760€18.99
These TRF 46 mm aluminium half cardan shafts add a focused drivetrain upgrade for compatible RC chassis, combining low weight with a ball bearing mounted layout that helps the axle rotate with less friction. In running, that reduced drag supports steadier power delivery through direction changes, where speed loss at the shaft can affect how cleanly a car carries momentum. The set contains 2 lightweight 46 mm swing axles and is intended as a chassis-specific accessory rather than a universal fit part. The half cardan design suits drivetrain maintenance, replacement work and targeted tuning where the shaft assembly is a key wear point. For TRF421X use, the specification names compatibility with ball bearing set 51762 and differential joints 51764 when the shafts are installed on the TRF421 chassis 42384. That combination gives a clear reference for planning a matching drivetrain setup instead of mixing unspecified parts. On the bench, the defined 46 mm length helps identify the correct shaft format before installation. During track use, the ball bearing mounted construction supports smoother axle movement in repeated corner entries and exits, where friction control matters most in a responsive RC drivetrain. Warning! Not suitable for children under 14 years.
Screws & ball head screws
4mm Flange Lock Nut Bla (8), RC accessory set
300054642€3.89
This RC hardware set brings a clean wheel finish and a more secure fastening point to compatible model cars. Each 4 mm flange lock nut uses a nylon insert that grips the thread as the nut is tightened, helping the connection stay in place when the chassis is exposed to repeated vibration, direction changes and regular wheel removal. The set contains 8 blue flange lock nuts, shown as individual metal fasteners with a flanged base and visible locking ring. That flange gives the nut a broader contact surface than a plain hex nut, which helps distribute clamping force at the mounting point. The blue colour variation also changes the look of the wheel area, making it useful for refresh work on existing builds or for replacing standard hardware supplied in many RC kits. The parts are intended as accessory or spare hardware rather than a complete vehicle component group. Compatibility covers a range of touring car and off-road cars, making the set useful for workshop drawers, rebuild projects and routine running maintenance. When wheel hardware has been removed repeatedly or no longer matches the rest of the chassis, this 8-piece set provides a straightforward replacement option with a locking function built into each nut.
Screws & ball head screws
4mm Flange Lock Nut Blue, RC accessory, 5-pack
300053159€13.79
These 4 mm flanged lock nuts bring a functional hardware upgrade to compatible RC vehicle setups, combining blue anodized aluminum with a compact fastening format that trims weight and sharpens the look of exposed wheel hardware. The metallic finish stands out clearly against darker rims, suspension parts and chassis details, giving maintenance work and final setup a more technical appearance. Each nut uses a hexagonal body with a threaded center hole and a wide integrated flange. That flange increases the contact area at the mounting point, which helps distribute pressure more evenly across the wheel surface than a narrow nut alone. The lock-nut format is suited to repeated fitting and removal during tuning, cleaning and routine parts changes. With 5 matching pieces in the pack, one extra nut remains available after a standard 4-wheel installation, which is useful to keep with trackside spares or workshop hardware. The small size and clear 4 mm specification make this set easy to match with compatible wheel axles and hubs in RC maintenance or customisation work. Whether replacing worn hardware, refining the finish of a competition-inspired build or keeping a spare ready between running sessions, these aluminum nuts add a precise mechanical detail where it is seen most.
Screws & ball head screws
4mm Shift Ball Connector M3, model spare part
319804831€4.29
This 4 mm Shift Ball Connector with M3 thread is a dedicated spare part for Truck and HiLift model applications. The stated size and thread specification provide a direct reference for replacing the same connector type in an existing assembly, where the correct fit of small linkage hardware matters to the overall mechanism. Its role is focused and practical: restoring a worn, missing, or damaged connection point with the specified 4 mm ball format and M3 threading. Because the product data identifies Truck and HiLift compatibility, the connector is suited to those model ranges rather than to general, undefined use. That makes it a useful workshop part for routine maintenance, repair work, and keeping compatible builds equipped with the correct hardware standard. The compact format also stores easily alongside other model service parts, so the required connector type is ready when a rebuild or replacement is due. In a repair session, this spare part can be selected by its exact connector size and thread rather than by guesswork. For ongoing model upkeep, it supports a tidy stock of application-specific hardware for Truck and HiLift assemblies. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
4mm Shim Set, RC accessory, 0.1/0.2/0.3 mm
300053586€11.29
This 4 mm shim set brings fine mechanical adjustment to RC maintenance and model workshop tasks where shaft spacing needs a precise correction. The pack contains 30 shims in total, divided into 10 pieces each at 0.1 mm, 0.2 mm and 0.3 mm, so clearance can be tuned in small measured steps instead of forcing a single thickness into every job. Each shim fits 4 mm shafts and is intended for situations where more clearance is required. The thin ring format slips onto the shaft to change spacing directly at the point of assembly, which helps when rotating parts need a more exact position. Combining different thicknesses from the set also allows intermediate spacing values, giving more control during drivetrain setup, axle work or other moving assemblies that rely on accurate alignment. On the bench, the 3 thickness options support methodical trial fitting during maintenance, rebuilds or parts replacement. The grouped sizes make it straightforward to compare spacing changes, correct excess play and refine the fit of compatible components without replacing the shaft itself.
Screws & ball head screws
4x10mm Step Screw, spare screw set for M-Chassis
300050585€4.39
This spare screw set provides 5 matching 4x10 mm step screws for compatible model chassis work, with a compact format that suits replacement, maintenance and rebuild tasks. The stepped design combines a threaded section, a cylindrical shoulder and a domed head, so one fastener can secure a part while also maintaining the spacing that a plain screw may not provide. The data names TA02, TA03 and M-Chassis compatibility, giving a direct reference for parts matching during service work. In a workshop tray or spares box, the 4x10 mm size is easy to identify when a build calls for the same specification. The 5-piece quantity supports targeted replacement rather than forcing a full hardware change across a chassis. The metal construction fits the role of a small mechanical fastening part where repeated fitting and removal are part of normal model upkeep. This screw pack suits bench repairs, scheduled maintenance and the final stages of a rebuild when the correct shoulder screw is needed to complete a mounting point. It also works as a useful reserve for keeping compatible TA02, TA03 or M-Chassis models ready for the next running session.
Screws & ball head screws
5.8x5mm Hex Ball Connector, model spare part
319803488€7.49
The TRF421/X 5.8x5mm Hex Ball Connector is a dedicated model spare part for precise repair and maintenance work. Its specified 5.8 x 5 mm size gives a clear reference when an existing connector needs to be matched, helping keep a compatible assembly consistent at the fastening point where the part is used. With 2 connectors in the pack, this replacement set covers a paired hardware change without shifting into a mixed assortment of unrelated small parts. The hex ball connector format points to a compact mechanical role inside a model assembly, where correct dimensions matter for fit and connection. Because the data identifies this as a supplies and accessories part rather than a complete model, the focus stays on exact replacement and upkeep rather than on a full build. Batteries are not included. This kind of spare part fits naturally into routine bench maintenance, whether a worn connector is being exchanged during servicing or a damaged piece is being replaced to return a compatible model assembly to working order. The compact format also makes it practical to keep a matching pair on hand for planned repairs. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm Adjuster Short, RC spare part set, 8 pieces
300054489€2.89
This spare part set brings 8 short 5 mm adjusters into the suspension area of an R/C car, where low-friction material helps linked joints move with a smoother action. Each piece is shaped for use at connection points that need a pivoting link, making it a practical choice for maintenance, worn-part replacement or a fresh chassis build that calls for matching hardware. The short format suits tighter installation points than a longer adjuster and keeps the linkage layout compact around the joint. In use, the circular eyelet opening forms the attachment point for the connected rod or pin, while the low-friction composition focuses on reducing drag at the moving interface. That can help suspension parts articulate more freely as the chassis loads and unloads through direction changes, uneven surfaces and repeated laps. The set contains 8 identical adjusters, which supports consistent fit across several matching positions on a compatible R/C car. On a workbench, these adjusters fit naturally into routine rebuilds, suspension refreshes and setup corrections where several joints need the same part at once. During running sessions, smoother linkage movement can support cleaner suspension response as the car transitions through braking, turn-in and acceleration.
Screws & ball head screws
5mm Adjuster, model accessory, 19mm length
300050596€3.49
This model accessory set supplies 6 ball pans sized at 5 mm diameter and 19 mm length for compatible maintenance and replacement work. The specified dimensions make the set easy to match against an existing assembly, especially when a worn or missing fitting needs the same connection size and overall length. The pack is intended for use with 50592, which gives a direct compatibility reference instead of leaving the fit to estimation. Ball pans sit at the connection point of linked parts, so the stated 5 mm diameter matters when selecting the correct hardware for a rebuild or service task. The quantity of 6 supports repeated replacement work across the same assembly and leaves matching spares available for later upkeep. On the workbench, this set fits neatly into routine model maintenance, whether a compatible build is being refreshed after use or a stored chassis is being brought back into running condition. The compact hardware format also makes it practical to keep alongside other small fittings for planned repairs and parts organisation. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm Ball Connector Nut, model accessory, 4pcs
309804206€5.49
The 5mm Ball Connector Nut set supplies 4 matching threaded fittings for model assembly, repair and maintenance work. Each piece combines an internal screw thread with a hexagonal base, giving small mechanical connections a defined contact point for tightening and adjustment during a build. The compact black metal parts are shaped for clean integration into technical assemblies where consistent hardware matters. Their uniform form keeps all 4 fittings visually and mechanically aligned across the same application, which helps when replacing worn connector nuts or preparing matching hardware for a fresh setup. The 5 mm sizing gives a clear reference for compatibility within the intended assembly, while the threaded interior supports a direct fit onto the corresponding shaft or screw. On the workbench, these fittings suit routine servicing, parts replacement and detail-focused model projects that call for precise small hardware rather than mixed spare nuts. The 4-piece pack also leaves matching components ready for follow-up maintenance when the same connection point appears more than once in an assembly. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5mm Ball Head M3, model accessory, 10-piece set
300050592€6.79
This 10-piece set of 5 mm Ball Head M3 parts adds a precise connection component to model maintenance, repair and assembly work. Each ball head uses an M3 threaded shaft and a 5 mm ball, a combination that suits compatible linkage and mounting points where a compact pivoting connection is needed. The metal construction and hex shoulder shown on each part support secure tightening during installation. The pack includes 10 matching ball heads, which helps keep spare hardware on hand for repeated service jobs or fresh builds that call for the same fitting throughout. The spherical head shape is suited to moving connection points that need controlled articulation rather than a fixed joint. The short threaded section keeps the mounting format specific and easy to match against existing compatible parts. The gold-coloured finish shown in the set also makes each piece easy to identify in a parts tray or workshop drawer. On a repair bench, these fittings suit the replacement of worn connection points on compatible models. During a new build, the matching 10-piece quantity supports consistent hardware selection across multiple mounting positions and leaves reserve parts available for later maintenance. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
5mm Body O-Rings, model accessory, 10 pieces
300054384€3.09
These 5 mm body O-rings are small model accessory parts that make a visible difference at the body mounts. Fitted to body mount rods, they allow fine height adjustment of the bodyshell position, so the shell can sit with a more controlled fit on the chassis during setup. The set contains 10 O-rings for replacement stock or fresh installation on compatible body posts. Their role is not limited to spacing: each ring also provides a cushioning effect between the bodyshell and the mount point. On rougher driving surfaces, that added cushion helps reduce body chatter that can appear when the shell moves against the posts over bumps. This gives the shell mount a tidier, more settled feel while the model is running. In workshop use, the rings are easy to keep on hand for routine maintenance, rebuilds, or shell changes between different bodyshell setups. They suit drivers who fine-tune shell height on body mount rods and want spare mounting hardware ready for regular track or car park sessions. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
5mm Shim Set, RC accessory, 0.1 0.2 0.3mm
300053587€11.29
This 5 mm shim set brings precise spacing control to RC chassis work, with 3 thicknesses at 0.1 mm, 0.2 mm and 0.3 mm for fine mechanical adjustment. Used at 5 mm fitment points, the shims help take up excess movement where a cleaner, tighter setup is needed around suspension parts or wheel axles. The set includes 30 shims in total, arranged as 10 pieces of each thickness, which supports repeated setup changes without relying on a single size. Small spacing differences can change how parts sit against each other, and these thin rings make those corrections measurable rather than improvised. On a maintenance bench, they can be selected to match the amount of free play present at a given point. On a fresh build, they support more exact placement of moving parts before the chassis goes into use. The shim assortment suits both on-road and off-road Tamiya vehicles, so the same pack can serve different running platforms in one workshop. Whether the goal is tidying axle movement, refining suspension fit or keeping a race chassis more closely adjusted, the 5 mm format gives a compact tuning part that earns its place in a spares box.
Screws & ball head screws
5mm/M3 Ball Socket Set, model accessory, 8 pieces
300050875€5.99
This 5 mm/M3 ball socket set brings a straightforward replacement option for compatible model linkages, with 8 matching parts ready for maintenance, repair work or a fresh build. The rod-end style shape and circular socket opening suit connection points that rely on a compact joint with controlled movement. Each piece is formed as a small connector end with a faceted outer body, a cylindrical shaft and a socket head that pairs with the stated 5 mm/M3 specification. That combination helps when an existing setup needs the same dimension rather than a close substitute. The pack format keeps several identical parts on hand at once, which is useful when multiple joints on one chassis use the same fitting or when spare hardware belongs in a regular bench stock. The black finish keeps the set visually consistent with many technical assemblies without drawing attention away from the surrounding components. In workshop use, the set fits naturally into routine servicing after wear at steering or suspension connection points. It also suits rebuilds where matching linkage ends across several rods help keep the assembly consistent and easy to sort during installation. Warning! Not suitable for children under 14 years.
Screws & ball head screws
5x9mm Ball Connector, model accessory, 5 pcs.
309805611€7.89
These 5x9 mm ball connectors add a compact mechanical link point to RC and model assemblies where a threaded joint and a smooth pivot surface need to work together. Each piece combines a 5 mm ball, an M3 threaded shaft and a 9 mm length, creating a clear fit for linkage tasks that depend on accurate spacing and dependable attachment. The polished metal finish and defined ball shape suit moving connections such as steering rods, suspension joints or other articulated model hardware, while the hexagonal shoulder provides a practical grip area during fitting. With 5 matching connectors in the pack, the set supports fresh builds, maintenance work and the replacement of worn fastening points. The small format also makes these parts useful for keeping workshop drawers or field boxes stocked with commonly needed RC hardware. In a chassis rebuild, the connectors can be fitted where rods or jointed parts need a threaded anchor and a pivoting contact point. On the bench, the uniform dimensions help keep left and right linkage positions consistent when several matching connection points are required in the same assembly. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
6 mm Shim Set, model accessory, 0.1 0.2 0.3 mm
300053726€16.29
This 6 mm shim set brings precise spacing control to model assemblies that need a cleaner fit on 6 mm shafts. With 3 thicknesses at 0.1 mm, 0.2 mm and 0.3 mm, the set supports small corrections where mechanical play affects alignment, rotation or part position. The set contains 30 pieces in total, arranged as 10 shims of each thickness. That spread makes it possible to compare different spacer combinations during a build or while servicing an existing model, instead of working around a single dimension. The thin shim format suits jobs where only a fraction of a millimetre is needed to correct end float or reduce unwanted movement between parts. Used singly or in combination, the spacers help adapt the fit to the exact requirement of the assembly point. On the bench, the set suits gearbox work, axle spacing and other 6 mm shaft applications where measured adjustment matters. As a compact workshop supply for model maintenance, repair or fresh assembly, it adds a practical range of fine spacer sizes that can be kept ready for repeated mechanical setup tasks. Warning! Not suitable for children under 14 years.
Axes & drive shafts
A-Parts Axlehousing CC-01, spare parts set
300005519€22.79
A-Parts Axlehousing CC-01 is a spare parts set for the CC-01 platform and is listed as parts for 58132. The black injection-molded runner carries several unused structural components in one frame, including axle housing style sections and mounting pieces that support a clean replacement job when original parts need to be swapped. The molded layout keeps each piece attached until removal, which helps with identification before assembly and reduces mix-ups between similar shapes. The visible parts include long housing sections, bracketed elements and a larger case-like component, all formed with mounting holes and connection points that suit chassis or drivetrain installation. Because the pieces come as a matched set on one sprue, builders can replace damaged sections with components produced together rather than mixing unrelated leftovers from a parts box. This kind of spare set fits naturally into bench maintenance, rebuild work and parts sorting between running sessions. When a CC-01 chassis needs fresh housing components after wear or breakage, the set provides the specific molded forms needed to return the assembly to working order.
Other spare parts & accessories
A-Parts Gearbox F/R 58370, RC spare parts
300004432€14.29
This A-Parts sprue is made for the 58370 and provides black injection-molded components for the gearbox F/R area of the DF-03. The unassembled runner groups housing halves, covers and structural sections in one set, giving repair work a direct route back to the intended drivetrain layout. The molded pieces show reinforced ribs, screw holes and cylindrical shaft or bearing mounts that matter when a transmission case needs its original geometry. A larger frame-like section with elongated slots adds another chassis-facing support element, while rounded shell parts serve as protective case sections around moving drivetrain parts. Because the components are supplied on the sprue, each shape stays clearly separated until preparation begins, which helps with part checking before installation. The glossy black finish matches the technical look of many RC chassis internals. This spare parts set suits maintenance benches, rebuild projects and targeted gearbox repairs where damaged housings, brackets or covers need replacement with matching forms. It also supports keeping a DF-03 running with dedicated structural parts on hand for future service work.
Other spare parts & accessories
Alligator Clip for P. Stand, model tool set
300074528€5.99
These alligator clips add a simple, controlled way to hold small model parts while cement or paint dries. The spring-loaded hinge and serrated jaws grip components firmly, so freshly finished pieces can stay separated from the work surface and remain easier to handle during careful bench work. Each pack contains 4 matching clips, which supports parallel work on several parts in the same session. The oval wire loop at the end of each clip provides a clear connection point for mounting on a compatible stand. The clips are intended for use with the Painting Stand, Work Stand and Bottled Paint Stand named in the product data, making them a practical addition for painting, gluing and drying steps where direct hand contact can disturb a finish. On a model bench, the clips can hold newly cemented sections while joints set, or keep painted components raised and separated between coats. Their compact metal form suits detail-focused tasks where small parts need a temporary grip point and a cleaner path through finishing work.
Shock absorbers & springs
Alum. Damper Retainer -1mm, RC part, blue anod
300053876€27.99
The Alum. Damper Retainer -1mm is a suspension tuning part for compatible RC chassis, combining machined aluminum construction with a blue anodized finish and a precise fit around the damper spring area. By lowering the spring set position by 1 mm compared with the aluminum mount of the OP595TRF shock, it supports a lower vehicle height and a more exact starting point for chassis setup. This set contains 4 spring plates for matched installation across the suspension. The rigid aluminum holder is made for reliable initial adjustment of the damper spring, helping setup changes translate more directly at the shock. Compatibility extends beyond the main chassis list: on TD4 and TD2 chassis, only standard front dampers can be installed. On MF-01X chassis, use with 42102 or 42273 or 42354 or 42355 or 54000. On F104 and F104W chassis, use with 53901. In workshop use, the 1 mm change gives a concrete option when refining stance and spring preload on touring, formula, or off-road based builds that share these chassis families. The 4-piece set suits rebuilds, replacement work, or a fresh suspension setup where consistent hardware across the dampers matters. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Alum. Turnbuckle Wrench blue, model tool, 3.0 mm
300053602€14.99
The Alum. Turnbuckle Wrench blue is a dedicated model tool for fine setup work on vehicles with 3 mm adjustable tie rods or camber rods. Its 3.0 mm clamping axle format is made to engage the turnbuckle directly, so alignment changes can be made with a controlled hand movement at the workbench between runs or during a full chassis service. The blue aluminum handle combines low weight with a firm feel, and the ribbed cylindrical shape supports stable finger placement while small adjustments are made. A forked open-end tip slides around the rod section to apply leverage where a standard wrench would be too bulky. This focused shape suits RC maintenance jobs where steering links and camber rods sit close to surrounding parts. The scope of delivery contains 1 clamping axle wrench. On a tuning bench, in a pit box, or beside a partly stripped chassis, this tool supports repeatable suspension and steering setup work without taking extra space. It also works well as a dedicated addition to a model building tool roll where 3 mm linkage hardware is adjusted regularly. Warning! Not suitable for children under 14 years.
Shock absorbers & springs
Aluminium Shock Absorbers, 55.62 mm, 2-Piece Set
300053155€51.99
These aluminium shock absorbers bring a low-friction damper setup to compatible Tamiya M chassis models, combining a machined cylinder interior with a 55.62 mm overall assembled length. The metal damper design is intended for smooth operation, giving the suspension a more even response as the shafts move through the cylinder. Compatibility covers the M-06 chassis, M-06 PRO chassis, M-05 ver.II PRO chassis, M-05 chassis and M-05 PRO chassis. The set contains 2 shock absorbers and is supplied with 48 pieces for assembly, including the hardware and sealing parts needed for the damper build. Aluminium bodies, coil springs, shafts, rod ends, clips and rings form a detailed suspension set that suits replacement, rebuilding or chassis tuning work on the listed platforms. Mounted on a compatible M chassis, the dampers support controlled suspension movement during cornering, braking and direction changes. The purple finish gives the underbody a distinctive technical look, while the complete 2-piece configuration fits neatly into workshop sessions focused on maintenance, setup changes or restoring smooth damper action. Warning! Not suitable for children under 14 years.
The best selection of RC spare parts
Whether you're looking to upgrade your RC model or repair it after an action-packed run – in our RC spare parts category, you'll find everything you need. Tamiya offers a wide range of high-quality spare parts for your RC models. Our spares cover all essential components to ensure your model is always in top shape.
Spare parts for RC cars: variety for every model
Our RC spare parts are specifically designed to enhance the performance and lifespan of your model. The range includes everything from steering knuckles, drive shafts, and control arms to ball joints and leaf springs. With over 400 different items, we offer everything a hobbyist could wish for. Whether you're searching for spare parts for RC cars or specific components like axle housings or oil dampers – you’ll find it here.
Why RC spare parts are important
No RC model can run without the right spare parts. RC spare parts not only ensure that your model is always ready for action but also boost performance and improve durability. Whether you need spare parts for RC cars or specific components like axles and gearbox protectors – regular maintenance and the replacement of worn-out parts are key to an optimal driving experience. With the right RC car spare parts, you can ensure that your model stays in top condition, allowing you to enjoy the full driving experience.
The benefits of Tamiya RC spare parts
When you choose Tamiya RC spare parts, you're opting for quality and precision. Each of our spare parts is perfectly matched to our models and offers the highest reliability. Thanks to high-quality materials and precise manufacturing, you can be sure that your model building project will always deliver the best performance. Whether you're just starting out in RC model building or you're an experienced hobbyist – Tamiya RC spare parts guarantee quality you can feel.
Browse through our RC spare parts shop
Explore our extensive range of RC spare parts and get your model back in top form. In our RC spare parts shop, you'll find everything you need to maintain, repair, or improve your vehicle. From beginners to professionals – we have the right RC car spare parts to take your model building to the next level.