Powertrain

Looking for a powertrain? You've come to the right place, discover gears, motor pinions and everything you need to get your RC model moving.

Powertrain

Looking for a powertrain? You've come to the right place, discover gears, motor pinions and everything you need to get your RC model moving.

More
12 mm Wheel Hub Hexagon Set, RC chassis accessory

Axes & drive shafts

12 mm Wheel Hub Hexagon Set, RC chassis accessory

300053056

€10.59

This 12 mm wheel hub hexagon set brings a clean aluminium upgrade to the wheel mounting area on a wide range of RC chassis. The pin-type design pairs each hex hub with a matching pin, creating the interface that transfers drive from the axle to the wheel while keeping the fit consistent during assembly, maintenance and parts replacement. The scope of delivery includes 4 wheel hub hexagons and 4 pins. The aluminium construction gives these small drivetrain parts a crisp machined look, and the 12 mm hex format matches the standard wheel mounting size used across many compatible on-road and off-road platforms. Fitment listed in the data covers CR-01, DF-03, DF-02, DT-03, DT-03T, DT-02, F103GT, M-06, M-06 PRO, M-05, M-05 PRO, M-05 ver.II PRO, MF-01X, TT-02B, TT-02FT, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. For workshop stock, rebuilds or replacing worn wheel mounting parts, this set covers one full chassis with 4 matching hubs and pins. It suits bench work where exact chassis compatibility matters and keeps the wheel mounting hardware aligned with the specified 12 mm standard used by the listed platforms.  Warning! Not suitable for children under 14 years.

12 mm Wheel Hub Hexagon Set, RC chassis accessory
19T Pinion Gear, model accessory, M0.6

Gears & motor pinions

19T Pinion Gear, model accessory, M0.6

303505049

€5.69

This 19T pinion gear is a compact drivetrain part for model applications that use module M0.6 gearing. Its 19 straight teeth mesh with the matching gear stage to pass motor rotation into the transmission, making it a functional choice when a specific tooth count is needed in the drive layout. The dark metal gear body is shaped for shaft mounting, with a central round bore and a side set-screw hole visible on the part. The top surface is marked with 19, which helps distinguish this version from other tooth counts during maintenance or parts sorting. As a small mechanical component, the pinion sits at the point where motor output meets the rest of the drivetrain, so the tooth count directly relates to the gearing combination used in the model. It fits naturally into workshop tasks such as replacing a worn pinion, restoring a compatible drivetrain, or keeping a matching spare ready for service intervals. On the bench, the compact form and visible marking make it straightforward to identify alongside other transmission parts and gearing options.  Warning! Not suitable for children under 14 years.

19T Pinion Gear, model accessory, M0.6
20/21T Pinion Gear Set, RC motor accessory, aluminum

Gears & motor pinions

20/21T Pinion Gear Set, RC motor accessory, aluminum

300050356

€9.99

This 20/21T Pinion Gear Set is a compact drivetrain upgrade for compatible RC chassis, pairing 2 aluminum pinions with 2 grub screws for secure mounting on the motor shaft. The 20-tooth and 21-tooth options give a clear gearing choice when replacing worn parts or adjusting the drive layout for a specific chassis setup. The machined aluminum construction keeps the focus on precise tooth engagement and clean fitment in model drivetrains that use module 0.6 gearing. One pinion is marked 20 for quick identification during setup, which helps separate the two ratios at the workbench. The set is intended for a wide spread of Tamiya platforms including M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02CB, GF-01, GF-01TR, GF-01CB, G6-01, G6-01TR and TB-05 PRO. It also supports CC-01 with 20T only, plus TA06, TA06 PRO, TA06 MS and TC-01 with 21T only. Additional chassis-specific notes are defined for several applications: DF-02 is used with 53703, F104PRO II is used with 51609, and TA07 MS is used with 51356, 51423 and 51548. That makes the set a practical spare or tuning part for keeping compatible RC cars running with the correct motor pinion combination.  Warning! Not suitable for children under 14 years.

20/21T Pinion Gear Set, RC motor accessory, aluminum
37mm SwingShafts, RC spare part for XV-02

Axes & drive shafts

37mm SwingShafts, RC spare part for XV-02

300051700

€16.19

These 37 mm SwingShafts are a focused RC spare part for keeping compatible chassis setups running cleanly and consistently. Designed for the XV-02 chassis, they replace worn swing shafts in the assembly universal area, where accurate fit and free movement matter to drivetrain response and stable operation during repeated running sessions. Each shaft is marked A • 37 and the set supplies 2 matching parts for the same specified length. The black rod form with metal inserts at both ends reflects the compact mechanical role these parts play inside the chassis assembly. On TT-02 based cars, the shafts can also be used alongside Item 54623 and 51444 for defined compatibility. Combined with Item 54874, they also allow a wider camber angle adjustment range on the TT-02 chassis, opening more setup latitude for fine tuning suspension geometry. This kind of replacement suits regular workshop maintenance, rebuilds after heavy use, or planned setup changes between chassis configurations. In a tuning session, fresh shafts can restore precise movement in the relevant assembly area, while in a parts box they serve as a chassis-specific option for XV-02 and selected TT-02 builds.

37mm SwingShafts, RC spare part for XV-02
39mm Drive Shaft Set, RC spare part for TT-01E

Axes & drive shafts

39mm Drive Shaft Set, RC spare part for TT-01E

300050883

€12.99

This RC spare part set provides 2 drive shafts in a 39 mm format for selected Tamiya chassis. Designed for TA-01, TA-04, TA-05 and TT-01E platforms, the shafts sit in the drivetrain where rotating assemblies need a compact link that can keep transmitting power while suspension parts move through their travel. Each shaft uses a straight center section with rounded ends and cross pins, a dogbone-style layout commonly used to connect outdrives and wheel-side drive components. That shape allows the shaft to articulate inside the drivetrain rather than acting as a fixed rod, which matters when a chassis is cornering, accelerating or running over uneven surfaces. The 39 mm dimension is the key fit point here, so matching the stated length is essential when replacing worn or missing drivetrain parts. Supplied as a 2-piece set, the pack suits paired servicing work without forcing a mixed left and right setup. In workshop use, these shafts fit naturally into rebuilds, maintenance sessions and parts-box planning for compatible touring car chassis. They also make sense as a trackside spare when a running session calls for a quick drivetrain refresh on TA-01, TA-04, TA-05 or TT-01E based models.  Warning! Not suitable for children under 14 years.

39mm Drive Shaft Set, RC spare part for TT-01E
3x23mm Turn-Buckle Shaft, RC spare part, 4 pcs

Axes & drive shafts

3x23mm Turn-Buckle Shaft, RC spare part, 4 pcs

309805780

€4.69

This set of 4 turn-buckle shafts in 3x23 mm format adds a precise replacement option for RC model maintenance and setup work. The metal shafts are threaded on both ends and use a compact central section that supports handling during installation, removal and adjustment inside a linkage assembly. Used in steering or similar connection points where exact length matters, turn-buckle shafts allow the assembly to be tuned by changing the effective linkage position rather than replacing the whole mechanism. The 3x23 mm specification is the key fit detail for matching an existing compatible build, and the pack of 4 provides a practical quantity for servicing paired linkage points or keeping matching spares on hand. The dark metallic finish and cleanly cut threads reflect the functional, workshop-focused character of the part. These shafts fit naturally into bench work such as replacing worn connectors, refreshing a running chassis or preparing a model for its next setup session. In a parts box, pit case or hobby drawer, a matched set of 4 helps keep compatible RC assemblies ready when a linkage needs a fast, like-for-like swap.  Warning! Not suitable for children under 14 years.

3x23mm Turn-Buckle Shaft, RC spare part, 4 pcs
44 mm TRF Half Cardan Shafts, RC spare part

Axes & drive shafts

44 mm TRF Half Cardan Shafts, RC spare part

300022104

€23.49

These 44 mm TRF half cardan shafts are a focused RC spare part for double jointed shaft drivetrains, supplied as a 2-piece set for compatible on-road chassis. Paired with ball bearings, they help cut friction through the driveline and reduce speed loss when the car is cornering, supporting smoother power transfer during fast direction changes. The shafts are intended for builders maintaining or refining established racing platforms rather than changing the basic layout of a chassis. Compatibility is stated for the TRF420, TA08PRO, TRF420X and TA08R, giving a direct fit option across several Tamiya on-road designs. When fitted to the TRF421 chassis, the setup calls for item 51762 ball bearing set for universal shafts, item 51763 TRF421X front direct cups and item 51764 TRF421X differential joints. That combination defines the matching driveline parts needed for correct use on the TRF421 platform. In workshop use, a replacement set like this supports routine driveline service after wear or impact damage. It also suits chassis builds where low-loss cornering performance matters, especially in sessions that place repeated load on the front or rear transmission during technical laps.

New
44 mm TRF Half Cardan Shafts, RC spare part
44mm TRF L.F. Drive Shafts, RC spare part

Axes & drive shafts

44mm TRF L.F. Drive Shafts, RC spare part

300042362

€22.49

These 44 mm TRF L.F. drive shafts are built for double cardan joint drivetrains that use swing shaft caps from Item 54921. The steel construction and fluorine surface coating focus on two key demands in RC driveline tuning: controlled movement at the joint and reduced friction where the shaft is working under load. Supplied as 2 matching shafts, the set supports a balanced left and right installation in compatible chassis layouts. A key update is the 10.8 mm needle pin section, which is 1 mm longer than on previous shafts. That extra length is specified to get more from swing shaft cap option parts, making these shafts a targeted upgrade for builders refining a double cardan setup rather than changing unrelated areas of the car. The LF44 marking shown on the shafts helps identify the part during maintenance or when several driveline options are kept in a pit box. In workshop use, these shafts suit rebuilds after wear, planned driveline updates, or a fresh parts selection for a compatible competition chassis. They are best matched with the stated cap system, where the longer pin section and low-friction coating can be used as intended in the assembled transmission layout.

44mm TRF L.F. Drive Shafts, RC spare part
45mm Drive Shafts, TRF421 spare part set

Axes & drive shafts

45mm Drive Shafts, TRF421 spare part set

300042387

€18.99

These 45 mm drive shafts for TRF421 are a focused drivetrain spare for model car maintenance, supplied as 2 matching parts for Low Friction Double Cardan Joint Shafts. The dark metal shafts are marked LF45 and use a straight shaft form with joint ends shaped for the matching assembly. At the shaft end, each part uses a 10.8 mm needle pin. This detail is specified to work together with Item 54921 Reinforced Swing Shaft Caps, with 2 pieces each for front and rear fitment. The compatibility note is narrow by design: these shafts are only for cars that use Item 54921, which keeps the replacement choice tied to the correct drivetrain layout instead of a broad universal fit claim. As a spare part set, the pair supports maintenance after wear in the transmission area and restores the intended shaft length of 45 mm on both sides. The 2-piece format suits workshop stock, scheduled rebuilds and targeted repairs on a TRF421 setup. In a bench session, the matched pair helps keep the drivetrain specification consistent when replacing both corresponding shafts in the same assembly.  Warning! Not suitable for children under 14 years.

45mm Drive Shafts, TRF421 spare part set
46 mm TRF Swing Shafts, RC accessory, aluminium

Axes & drive shafts

46 mm TRF Swing Shafts, RC accessory, aluminium

300051760

€18.99

These TRF 46 mm aluminium half cardan shafts add a focused drivetrain upgrade for compatible RC chassis, combining low weight with a ball bearing mounted layout that helps the axle rotate with less friction. In running, that reduced drag supports steadier power delivery through direction changes, where speed loss at the shaft can affect how cleanly a car carries momentum. The set contains 2 lightweight 46 mm swing axles and is intended as a chassis-specific accessory rather than a universal fit part. The half cardan design suits drivetrain maintenance, replacement work and targeted tuning where the shaft assembly is a key wear point. For TRF421X use, the specification names compatibility with ball bearing set 51762 and differential joints 51764 when the shafts are installed on the TRF421 chassis 42384. That combination gives a clear reference for planning a matching drivetrain setup instead of mixing unspecified parts. On the bench, the defined 46 mm length helps identify the correct shaft format before installation. During track use, the ball bearing mounted construction supports smoother axle movement in repeated corner entries and exits, where friction control matters most in a responsive RC drivetrain.  Warning! Not suitable for children under 14 years.

46 mm TRF Swing Shafts, RC accessory, aluminium
A-Parts Axlehousing CC-01, spare parts set

Axes & drive shafts

A-Parts Axlehousing CC-01, spare parts set

300005519

€22.79

A-Parts Axlehousing CC-01 is a spare parts set for the CC-01 platform and is listed as parts for 58132. The black injection-molded runner carries several unused structural components in one frame, including axle housing style sections and mounting pieces that support a clean replacement job when original parts need to be swapped. The molded layout keeps each piece attached until removal, which helps with identification before assembly and reduces mix-ups between similar shapes. The visible parts include long housing sections, bracketed elements and a larger case-like component, all formed with mounting holes and connection points that suit chassis or drivetrain installation. Because the pieces come as a matched set on one sprue, builders can replace damaged sections with components produced together rather than mixing unrelated leftovers from a parts box. This kind of spare set fits naturally into bench maintenance, rebuild work and parts sorting between running sessions. When a CC-01 chassis needs fresh housing components after wear or breakage, the set provides the specific molded forms needed to return the assembly to working order.

A-Parts Axlehousing CC-01, spare parts set
BB-01 48 Pitch Spur Gear 86T, RC spare part

Gears & motor pinions

BB-01 48 Pitch Spur Gear 86T, RC spare part

300051714

€4.59

The BB-01 48 Pitch Spur Gear 86T is a dedicated RC spare part for drivetrain setups that use a 48 pitch gear standard. Its circular toothed form and 86-tooth count define how it meshes with the matching pinion, making it a precise choice when a worn transmission part needs replacement or a specific gearing ratio is required for a build. This pack contains 1 spur gear. The part is intended for use with a 48 pitch pinion gear, so the tooth profile stays within the same pitch system across the gear mesh. That matters during maintenance and rebuild work, because matching pitch standards help the teeth engage correctly during rotation. The gear is shown as a molded component with a central mounting hole and reinforced face structure, details that support its role as a fitted mechanical part rather than a general workshop accessory. In practical use, the gear suits bench repairs, scheduled part changes and drivetrain refreshes on various R/C cars that accept this specification. When an RC chassis calls for an 86T spur gear in 48 pitch format, this part provides a direct, clearly defined replacement to keep the transmission setup on the intended gearing standard.

BB-01 48 Pitch Spur Gear 86T, RC spare part
BB-01 D-Parts Suspension Arms, chassis spare set

Axes & drive shafts

BB-01 D-Parts Suspension Arms, chassis spare set

300051713

€12.79

The BB-01 D-Parts suspension arm set supplies the core chassis pieces that guide wheel movement at both the front and rear of a BB-01 build. With 2 front arms and 2 rear arms in the pack, the set supports a matched replacement across both ends, keeping the suspension layout consistent when worn or damaged parts need changing. Each arm is molded in glass fiber-reinforced nylon, a material choice suited to detailed chassis parts with hinge-pin mounts and outer pivot points. The shared right and left component shape reduces sorting during maintenance, since the same form is used on both sides. The included D-Parts for the BB-01 chassis focus on the mechanical areas that control suspension travel and the connection points around the wheel assemblies. This set fits workshop use, routine upkeep, or a rebuild after hard off-road sessions with a BB-01 machine. It also works as a practical spare to keep alongside other chassis parts, ready for quick replacement when the front or rear arm assemblies need attention.

BB-01 D-Parts Suspension Arms, chassis spare set
BB-01 Dogbone Shafts, RC spare part, steel

Axes & drive shafts

BB-01 Dogbone Shafts, RC spare part, steel

300022068

€18.99

These BB-01 Dogbone Shafts are a dedicated steel spare part for the BB-01 chassis and supply a matched pair for drivetrain service. The 2 shafts use the classic dogbone layout, with a pinned ball end on one side and a cup-style joint end on the other, so rotational force can pass between connected drivetrain parts while suspension movement changes the working angle. Crafted in carbon tool steel, the shafts focus on the part of the drivetrain that sees repeated motion under load. The black metal finish and the identical left and right pieces shown in the set make them suited to a like-for-like replacement when an existing pair needs renewal. As a chassis-specific component, the fitment stays tied to the BB-01 platform rather than a broad universal range, which helps keep maintenance accurate and parts selection straightforward. On a bench build, repair session or routine drivetrain refresh, this 2-piece set covers the shaft pair in one pack. It suits keeping a running chassis in service, replacing worn transmission links, or preparing spares for future maintenance on BB-01 based RC vehicles.

BB-01 Dogbone Shafts, RC spare part, steel
BB-01 Front Upright Set, RC spare parts, 2 pcs

Axes & drive shafts

BB-01 Front Upright Set, RC spare parts, 2 pcs

300051712

€7.19

The BB-01 C-Parts front upright set supplies 2 replacement components for the front end of a BB-01 chassis, giving RC model maintenance a direct way to renew a key mounting area. Each upright is molded in glass fiber-reinforced nylon, a material choice that suits parts handling steering pivot loads, wheel support points and repeated workshop fitting. The set uses the same component shape for right and left, which simplifies parts identification when a front corner is being rebuilt. The large circular opening in each upright forms the bearing seat area, while the molded mounting points connect with the surrounding chassis hardware. As C-Parts for the BB-01 platform, these pieces belong to the chassis structure itself rather than to bodywork or trim, making them relevant for repair, upkeep and keeping an existing build in running condition. On a bench setup, the pair can replace worn, damaged or missing originals during a front-end refresh on a BB-01 model. The 2-piece format also suits keeping matching spares on hand for routine service, especially when steering and wheel support components need to be exchanged as a pair.

BB-01 Front Upright Set, RC spare parts, 2 pcs
BB-01 T Parts, rear suspension mount set

Axes & drive shafts

BB-01 T Parts, rear suspension mount set

319225237

€14.29

The BB-01 T Parts rear suspension mount set is a focused replacement and maintenance set for the specified suspension area, giving builders the exact molded shapes needed for work on the rear mounting section. The sprue format keeps the components together in one organized frame until removal, which helps with part identification before fitting begins. The visible layout includes multiple molded pieces in black and dark gray, with each shape formed for a technical role within the assembly rather than as a generic mixed parts pack. Numbered positions on the runner support orientation during workshop handling, and the molded frame format helps keep smaller connectors and bracket-style pieces grouped before installation. This makes the set useful when a damaged mount section needs renewal or when a build calls for the named BB-01 rear suspension area to be rebuilt with matching parts. On the bench, the set suits careful repair sessions, planned maintenance, or keeping key replacement parts ready alongside an existing BB-01 build. It also works well as workshop stock for model owners who prefer to keep the specified suspension mount section serviceable with the correct dedicated parts.

BB-01 T Parts, rear suspension mount set
Bevel Gear Differential Set, RC spare part kit

Gears & motor pinions

Bevel Gear Differential Set, RC spare part kit

300050602

€5.99

This bevel gear differential set is a drivetrain spare part kit for selected RC chassis, built around the internal mechanism that distributes drive through a differential assembly. Supplied as a kit version, it provides 8 pieces for differential service on compatible platforms and suits repair work that focuses on the gear internals rather than the complete chassis. The set is specified for CR-01 and DT-02 chassis, making it a targeted choice when those platforms need matching replacement parts in the differential area. The included contents are 1 bevel gear differential set with 8 pieces. Studio imagery shows the internal layout clearly, with larger bevel gears, smaller mating gears, a 3-armed carrier and 2 flat washers or shims, all centered on the gear action inside the assembly. That component mix supports rebuilds where worn or damaged internal differential parts affect drivetrain function. In workshop use, this kind of set suits routine maintenance, repair after heavy running, or a planned refresh of the axle internals on a compatible chassis. It is not available for XB models, so the fit remains tied to the listed chassis platforms and their matching differential setup.  Warning! Not suitable for children under 14 years.

Bevel Gear Differential Set, RC spare part kit
Bevel Pinion Gear, spare part for model drivetrain

Axes & drive shafts

Bevel Pinion Gear, spare part for model drivetrain

305455040

€3.59

This bevel pinion gear is a dedicated spare part for model drivetrain service, built to pass rotational force through an angled gear interface inside a transmission assembly. The compact metal component combines a toothed upper edge with a conical body, making it suitable for mechanical layouts where direction changes within the drive line are required. Reinforced rib-like shaping along the gear body adds structural definition to the part itself, while the central mounting opening is formed for installation on a shaft or axle. That layout supports correct positioning within the surrounding mechanism and helps restore clean meshing when an original gear shows wear or damage. Supplied as 1 individual gear, it suits selective replacement work where only the affected transmission element needs to be exchanged. The plain silver-gray finish keeps the mechanical form easy to identify during maintenance and parts sorting. In workshop use, this spare gear fits repair jobs on model assemblies that rely on compact internal power transfer between connected drivetrain parts. It also serves as a practical replacement to keep an existing build in running condition after wear in a heavily used transmission section.  Warning! Not suitable for children under 14 years.

Bevel Pinion Gear, spare part for model drivetrain
Bevelgear Set, model spare parts for drivetrain

Gears & motor pinions

Bevelgear Set, model spare parts for drivetrain

319440510

€5.19

This bevelgear set brings the key transmission parts needed for focused drivetrain maintenance on compatible model assemblies. The set contains 5 metal gears: 2 larger bevel gears with central bore openings and 3 smaller pinion-style bevel gears with short shafts. Their angled teeth are made to mesh at intersecting shaft positions, a layout commonly used to redirect rotary motion through a compact gearbox section. The combination of larger hub gears and smaller pinions supports replacement work where worn or damaged gear teeth can affect smooth running. Because bevel gears transfer motion across a change in shaft direction, they are suited to mechanical areas where drive needs to turn through an angle rather than continue in a straight line. The silver-gray metal construction gives each gear a clearly defined tooth profile and a technical finish that matches the functional role of these parts. Compatibility is stated for BB18, BB19 and BB20, with reference to 58618 Mt.Bee. On the workbench, this set suits planned servicing, targeted repair, or keeping essential transmission parts ready for a compatible model. The clearly differentiated gear sizes also help when matching the correct meshing pair during maintenance and reassembly.  Warning! Not suitable for children under 14 years.

Bevelgear Set, model spare parts for drivetrain
BT-01 C Parts, wheel axle spare parts set

Axes & drive shafts

BT-01 C Parts, wheel axle spare parts set

300051732

€6.99

The BT-01 C Parts set supplies original replacement components for the BT-01 chassis, centering on wheel axle and centre shaft parts used in the drivetrain. Differential cup joints, axle shafts, dogbone shafts and propeller shaft joints are grouped on one sprue, giving a direct source for matching parts when a running chassis needs repair or a rebuild calls for fresh hardware. These components handle connection and rotation transfer inside the BT-01 layout. Dogbone shafts link moving drivetrain sections, while cup joints and shaft ends sit at key handoff points between connected assemblies. Using original parts helps maintain the intended fit of the chassis design and keeps replacement work aligned with the existing BT-01 structure. The set is described as C Parts wheel axles and centre shaft, which makes its role within the chassis system clear for maintenance planning. This spare parts set fits workshop use, routine upkeep and targeted replacement after wear or damage in regular RC running. It also supports keeping a BT-01 chassis ready for the next rebuild session by covering several related drivetrain components in one pack. Compatible with the BT-01 chassis.  Warning! Not suitable for children under 14 years.

BT-01 C Parts, wheel axle spare parts set
BT-01 T Parts, RC spare parts, suspension arms

Axes & drive shafts

BT-01 T Parts, RC spare parts, suspension arms

300051736

€6.79

The BT-01 T Parts set is an original spare parts sprue for the BT-01 chassis, bringing together key structural pieces used around the suspension and body mounting areas. Molded in black and supplied as a single T runner, the set gives a direct source for replacing worn, damaged or missing chassis parts while keeping the fit aligned with the BT-01 platform. Alongside suspension arms, the sprue carries body mounts, bumpers and damper shafts, plus further related pieces formed as part of the same runner. The image layout shows mirrored left and right components, support posts, mounting sections and smaller braces, which helps identify each part before installation. This kind of grouped spare set is useful when several connected areas need attention at once, rather than replacing only one isolated piece. As an original spare part from Tamiya, it is intended to match the chassis design named in the data rather than serve as a universal RC car part. On the bench, the set suits routine maintenance after repeated running sessions, impact damage or a rebuild of a BT-01 chassis. It also helps keep a parts box stocked with core replacement pieces that are often needed around suspension and body support points.  Warning! Not suitable for children under 14 years.

BT-01 T Parts, RC spare parts, suspension arms
C-Parts Gearboxguard, model spare parts for CC-01

Gears & motor pinions

C-Parts Gearboxguard, model spare parts for CC-01

300005521

€15.79

C-Parts Gearboxguard for CC-01 supplies replacement molded components for drivetrain and chassis-area service on a compatible model build. The black sprue format keeps the individual sections together until trimming, making it easier to identify the required shapes during a repair session at the workbench. The set is presented as model spare parts rather than a complete kit, with molded guard, housing and fastening-area forms visible on the frame. Ribbed detailing, screw holes and cylindrical mounting posts support the mechanical role of the parts once fitted into the existing assembly. Several circular pieces and hexagonal cap-like forms add further replacement coverage for the same component group, which helps when an older build needs targeted maintenance instead of a full parts change. This format suits rebuilds after wear, damage or disassembly, and it also helps keep a CC-01 chassis in running condition with matching replacement sections on hand. AreBatteriesIncluded is stated as false in the data, and no battery is included with these spare parts.

C-Parts Gearboxguard, model spare parts for CC-01
CC-01 B-Parts, steering servo saver spare set

Axes & drive shafts

CC-01 B-Parts, steering servo saver spare set

300005520

€15.79

CC-01 B-Parts brings the steering and servo saver section together in one spare parts sprue, giving compatible builds a direct route back to clean mechanical function. The black injection-molded runner presents the parts in an organized layout, with larger mirrored pieces, smaller linkage forms and circular clips arranged for clear identification at the bench. This set is intended as replacement hardware for the CC-01 rather than as a complete vehicle kit, so the focus stays on the steering assembly where accurate fit matters most. Visible molded part numbers such as 8, 9, 10, 11 and 13 help distinguish the individual shapes during preparation. The runner format keeps each component attached until needed, which supports tidier handling while checking the required section against an existing build. Glossy black molded surfaces and crisp edges reflect the technical character expected from RC maintenance parts. On a repair bench, the sprue suits worn steering sections, missing servo saver pieces or a planned refresh of an older chassis. It also fits neatly into a spares collection for hobby work, where keeping the correct CC-01 steering parts close at hand can shorten downtime between rebuild sessions.

CC-01 B-Parts, steering servo saver spare set
CC-01 G-Parts, spare parts set for 58132

Gears & motor pinions

CC-01 G-Parts, spare parts set for 58132

309005422

€17.29

CC-01 G-Parts for 58132 provide a focused spare-parts set for drivetrain service, centered on molded mechanical components used in rotational power transfer. The set brings together black injection-molded gear elements and related mounting parts that suit repair work on an existing compatible model. Visible components include multiple spur gears, bevel gears, a larger gear with an integrated vertical pinion, a round plate with screw holes, and additional small parts carried on a sprue frame. That combination points to gearbox or differential-related functions where meshing teeth, axle positions and cover placement all need to match the original layout. The larger geared part with integrated pinion supports a compact transfer step within the mechanism, while the bevel gear forms indicate angled drive movement inside the assembly. The round plate adds a fitted structural piece rather than loose hardware, helping restore the intended arrangement of the surrounding mechanism. On the bench, this set suits planned maintenance, wear-related replacement, or the completion of a drivetrain rebuild when original molded parts are no longer usable. It also works well as workshop stock for model owners who keep compatible mechanical spares ready for future service on 58132-based running gear.  Warning! Not suitable for children under 14 years.

CC-01 G-Parts, spare parts set for 58132
CC-01 Universal Joint, model accessory for Pajero

Axes & drive shafts

CC-01 Universal Joint, model accessory for Pajero

304135042

€15.99

The CC-01 Universal Joint is a dedicated model accessory for Pajero 58132 and serves as a replacement drivetrain part where a precise rotating connection is needed. Its universal-joint design allows torque to pass between connected parts even when the angle changes, which is important on a chassis layout that moves through steering and suspension travel. Used during maintenance or repair, this component helps bring a worn drivetrain area back to a defined mechanical fit. The clear CC-01 designation keeps the application focused on the matching platform, while the Pajero 58132 reference identifies the intended model directly. That makes part selection more straightforward when servicing an existing build rather than replacing larger assemblies unnecessarily. As a single-purpose spare part, it suits bench work that focuses on keeping the drivetrain operating cleanly and consistently. In a workshop setting, the joint can be fitted during routine overhaul after extended running or when a damaged coupling starts to affect smooth rotation. It also works as a practical stock spare for model owners who maintain a CC-01 Pajero 58132 and want the correct replacement ready for the next service interval.  Warning! Not suitable for children under 14 years.

CC-01 Universal Joint, model accessory for Pajero
CC-02 SS Adjust Tie-Rod Set, chassis accessory

Axes & drive shafts

CC-02 SS Adjust Tie-Rod Set, chassis accessory

300054929

€23.99

The CC-02 SS Adjust Tie-Rod Set adds a more tunable steering linkage to compatible CC-02 chassis cars by replacing the standard rigid molded link with stainless steel turnbuckle shafts. That change brings toe angle adjustment into the setup, allowing the chassis to be dialed in with greater precision for different running conditions and handling preferences. The set includes 1 x 104 mm stainless steel tie-rod, 1 x 53 mm stainless steel tie-rod, adjusters, and small attachment parts. The turnbuckle shafts feature hex adjustment sections, so length can be changed with a wrench as shown in the set documentation. This mechanism makes it possible to alter the linkage length directly through the shaft rather than removing and replacing a fixed rod. Stainless steel construction gives the main rods a durable metal format suited to repeated setup changes on the chassis. Installed in place of the standard kit linkage, the set supports fine setup work when steering response needs a more exact toe setting than the stock molded part allows. It suits bench tuning, rebuilds, and upgrade work on CC-02 based builds where adjustable linkage geometry is part of the chassis setup.  Warning! Not suitable for children under 14 years.

CC-02 SS Adjust Tie-Rod Set, chassis accessory
Cup Joint Universal Shaft for TT-01 DF-02

Axes & drive shafts

Cup Joint Universal Shaft for TT-01 DF-02

300053790

€21.29

This Cup Joint Universal Shaft is a drivetrain spare part for TT-01 and DF-02 chassis setups, built to work at the gearbox in combination with an assembly cardan shaft. The pot joint design is intended to suppress drive losses, supporting smoother running when the drivetrain is under power. The set contains a left and a right part, giving the specified pair needed for the matching drivetrain layout. Its application is clearly defined for use with the DF-02 Assembly Universal Shaft 53791 or the Assembly Universal Shaft for TT-01 and TA04 53792. That makes it a focused choice for maintenance, replacement, or a driveline setup built around those universal shaft systems. The compact metal parts are shaped for precise fit within the transmission area, where clean engagement matters for consistent rotation. On the bench, this kind of component belongs in rebuilds, wear-part replacement, or a planned drivetrain update on compatible chassis. In running use, the gearbox connection and universal shaft pairing support a more fluid transfer of drive through the system, especially where a correctly matched left and right set is required.  Warning! Not suitable for children under 14 years.

Cup Joint Universal Shaft for TT-01 DF-02
D-Parts F/R Upright, model spare part, 1 pc.

Axes & drive shafts

D-Parts F/R Upright, model spare part, 1 pc.

300005296

€14.49

D-Parts F/R Upright is a model spare part for selected Tamiya vehicle builds and is supplied as 1 piece. The molded black component is shaped for front and rear upright use, making it a practical choice when an original part from a compatible chassis setup needs replacement during maintenance or repair. The part is specified for compatibility with 58321, 58232 and 58256. Its form combines mirrored upright sections with circular housings, angled support arms, fastening holes and molded connection points in a single unit. That layout matters during repair work because the geometry of an upright part affects how surrounding running gear components line up and mount. Replacing a worn or damaged section with the correct designated part helps restore the intended fit within the assembly area. This spare part suits workshop stock for ongoing model upkeep, rebuilds after heavy running, or the completion of an older chassis that needs the original designated component. Kept alongside other maintenance parts, it supports faster repairs when a compatible model returns to the bench for service or parts replacement.

D-Parts F/R Upright, model spare part, 1 pc.
DB-01 Fluorine Coated Suspension Balls, RC parts

Axes & drive shafts

DB-01 Fluorine Coated Suspension Balls, RC parts

300053709

€16.79

DB-01 Fluorine Coated Suspens. Balls(8) is a suspension hardware set for RC chassis tuning and maintenance. The fluorine coating reduces friction between each suspension ball and its mount, which supports more fluid suspension movement when the chassis changes direction, settles into corners or reacts to surface input. The scope of delivery contains 8 balls for wishbone shafts, making this set suitable for replacing worn contact points with matching hardware across the suspension assembly. Compatibility reaches across several Tamiya chassis families: TA06, TA06 PRO, TA06 MS, TB-03 VDS and TA05 ver.II use these balls with 54064-54074 and 54171-54175. FF-03, FF-03 PRO, TB-03, TB-04 and TB-04 PRO use them with 54064 to 54074. M-07 CONCEPT and M-08 CONCEPT use them with 54760, while TC-01 uses them with 54760 and 54787. This suspension set suits regular workshop servicing, chassis refreshes and targeted setup work where smooth ball-to-mount movement matters. It also fits neatly into a spares box for track days or bench maintenance, with 8 matching pieces ready for the specified chassis applications.  Warning! Not suitable for children under 14 years.

DB-01 Fluorine Coated Suspension Balls, RC parts
DB-01/TRF501X Pinion Gear 24/25T 48DP Set

Gears & motor pinions

DB-01/TRF501X Pinion Gear 24/25T 48DP Set

300054218

€16.79

The DB-01/TRF501X Pinion Gear 24/25T 48DP set adds a focused drivetrain tuning option to compatible RC chassis with 2 metal pinion gears in 24T and 25T sizes. The 48 pitch format and newly designed tooth profile are intended to reduce noise and friction loss, supporting a cleaner mesh and a smoother running feel during track sessions, maintenance work or ratio changes. Each gear uses 2 grub screw attachment holes, so the fastening position can be selected during installation on the motor shaft. The set also comes with 3 grub screws and an L-shaped hex key for fitting and adjustment. This makes the set useful both as a replacement for worn drivetrain parts and as a practical gearing option when refining acceleration, response or running characteristics on a supported chassis. Compatibility covers DB01-Chassis, DB02-Chassis, DN-01-Chassis, TD2-Chassis, TD4-Chassis, TRF201-Chassis, TRF201XMW-Chassis, TRF211XM-Chassis and TRF502X-Chassis. For TD2-Chassis and TD4-Chassis, use with 22031 is required. On the bench, the 24T and 25T choice allows quick comparison between 2 gearing steps while keeping the same 48DP standard across the setup.  Warning! Not suitable for children under 14 years.

DB-01/TRF501X Pinion Gear 24/25T 48DP Set
DB-01/TRF501X Spur Gear, RC spare part, 91T 48DP

Gears & motor pinions

DB-01/TRF501X Spur Gear, RC spare part, 91T 48DP

300051314

€6.99

The DB-01/TRF501X Spur Gear 91T 48DP is a dedicated RC spare part for compatible drivetrain setups, combining a 91-tooth count with a 48 pitch tooth profile for precise transmission matching during maintenance or repair. Built for use with the DB01 and TF503 chassis named in the data, it gives the drivetrain a clearly specified replacement component rather than a generic gear. The 91T layout determines the driven gear size within the transmission, while the 48DP format identifies the fine tooth pitch used for correct meshing with the matching pinion. That makes this gear relevant when restoring the original gearing arrangement on a compatible chassis after wear, damage or routine workshop service. As a model supply in the Models & Accessories range, it suits bench work focused on drivetrain upkeep rather than cosmetic changes. The listed designation DB-01/TRF501X also helps place the gear within specific RC platform families. In practical use, this spare part belongs in the workshop alongside other transmission service components for compatible off-road chassis builds. During maintenance sessions, it supports a straightforward parts swap that keeps the drivetrain specification aligned with the stated 91T 48DP format for continued running on the correct platform.  Warning! Not suitable for children under 14 years.

DB-01/TRF501X Spur Gear, RC spare part, 91T 48DP
DF-02 B-Parts Upright/Steering Arm Spare Set

Axes & drive shafts

DF-02 B-Parts Upright/Steering Arm Spare Set

300051076

€14.29

DF-02 B-Parts Upright/Steering Arm is a chassis spare set for the DF-02 and TT-02B platform, built to restore key steering and wheel support points with matching replacement components. The black molded parts are arranged as 4 sprues with 20 pieces, making this set a practical choice when worn or damaged suspension and steering sections need to be renewed. The upright and steering arm shapes handle pivot and linkage mounting duties within the front end layout, while the mirrored forms support correct left and right installation. Multiple mounting holes are formed into the parts for chassis attachment and linkage connection. The set also includes 4 wheel nuts and 8 washers, adding the fastening hardware needed for the relevant assemblies. As a dedicated spare set, it suits routine maintenance, repair work after running sessions, or keeping workshop stock ready for future rebuilds. On the bench, the parts help bring a DF-02 or TT-02B chassis back into running condition with matching replacement geometry instead of mixed substitutes. For hobby maintenance, rebuild projects, or replacing damaged steering components after track use, this set keeps the fit focused on the specified chassis types.  Warning! Not suitable for children under 14 years.

DF-02 B-Parts Upright/Steering Arm Spare Set
DF-02 Drive Shaft Set, RC spare part, 64 mm

Axes & drive shafts

DF-02 Drive Shaft Set, RC spare part, 64 mm

300051081

€13.29

This DF-02 Drive Shaft set provides a direct spare part solution for the DF-02 chassis and includes 2 drive shafts with a stated length of 64 mm. The matching pair format suits maintenance work where both sides of the drivetrain need the same part specification, keeping the assembly consistent across the axle setup. Each shaft follows a straight cylindrical form with ball-shaped ends and cross pins for connection at the mounting points. That layout is designed for mechanical transfer within the drivetrain while matching the geometry required by the DF-02 platform. The black finish and compact rod profile make the parts easy to identify during a rebuild or parts check. As replacement components rather than a general accessory, these shafts are intended for the named chassis application instead of broad multi-model use. The set fits routine workshop tasks such as replacing worn transmission links during servicing, refreshing a stored chassis before running, or keeping matching spare parts ready for a future repair. In a bench setup focused on DF-02 maintenance, the 2 included shafts cover a complete paired change with the specified 64 mm dimension.  Warning! Not suitable for children under 14 years.

DF-02 Drive Shaft Set, RC spare part, 64 mm
DF-02 E-Parts, spare parts set, wheel axle

Axes & drive shafts

DF-02 E-Parts, spare parts set, wheel axle

309005756

€9.79

The DF-02 E-Parts set provides replacement components for the wheel axle and differential joint area, giving compatible model maintenance a direct route to restoring key drivetrain connections. Black moulded parts are supplied on sprues, with the axle-related and joint-related sections grouped for clear identification before removal and fitting. This spare parts set is designated as E Parts for 58328 and is intended for focused servicing rather than broad replacement across unrelated assemblies. The visible component mix includes cylindrical axle-linked pieces, connector forms and longer structural elements that belong to the same parts tree. Keeping these pieces together on one runner helps confirm part shape and orientation during workshop preparation. The set format also suits repair benches where damaged drivetrain sections need matching replacement geometry from the original parts family. Used during maintenance, rebuilds or parts replacement after wear, the DF-02 E-Parts set supports continued running with the correct component group kept on hand. It fits naturally into a spares collection for model upkeep, especially when the axle and differential connection points need renewed parts to return a chassis to working order.  Warning! Not suitable for children under 14 years.

DF-02 E-Parts, spare parts set, wheel axle
DF-02 Metal Parts Bag A, model spare parts

Gears & motor pinions

DF-02 Metal Parts Bag A, model spare parts

309400152

€30.49

DF-02 Metal Parts Bag A is a model spare parts set identified in the source data for 58328. The designation points to a defined replacement pack rather than a general accessory, making it a practical choice when an existing build needs the matching hardware group restored or completed. The stated metal construction gives this set a clear material identity, while the DF-02 naming keeps the part reference specific for workshop organisation. As a parts bag, it suits maintenance, repair and replacement tasks on a compatible build already in use. The source data places it in model supplies, which fits its role as a support component for an established model rather than a standalone vehicle or assembly kit. This also helps when sorting spares by platform and bag reference during bench work. On the work surface, a clearly named replacement pack saves time during upkeep because the part group is already narrowed to DF-02 Metal Parts Bag A for 58328. It works well as a stock spare for routine servicing, for completing an older build, or for replacing missing original metal components with the specified bag reference.  Warning! Not suitable for children under 14 years.

DF-02 Metal Parts Bag A, model spare parts
DF-02 Universal Shaft Assembly, RC drivetrain set

Axes & drive shafts

DF-02 Universal Shaft Assembly, RC drivetrain set

300053791

€56.99

The DF-02 Universal Shaft Assembly is an RC drivetrain upgrade set built to cut friction where the axle moves through the steering angle. In place of a standard dog bone drive shaft, the universal joint layout keeps power delivery more direct while the front end changes direction, which helps the chassis carry drive more cleanly through bends and technical sections. The set contains 1 ball cardan shaft set with 13 pieces and is built around 2 universal shafts. Visible components include wheel axle parts, cross joints, pins, grubscrews, AW grease and a hex wrench for assembly. The shafts are marked 70, and the document notes grease application at multiple moving contact points in the joint and cup areas. The assembly is designed to be taken apart again, which allows consumable parts to be replaced when wear appears instead of discarding the full shaft unit. Fitment is specified for DF-02, DT-02, DT-03, DT-03T and TT-02B chassis with the matching cup joints listed in the data. On a buggy set up for repeated steering input, jumps and direction changes, this drivetrain layout supports a more consistent feel at the driven axle and gives maintenance-focused builders a clear upgrade path within compatible Tamiya chassis.  Warning! Not suitable for children under 14 years.

DF-02 Universal Shaft Assembly, RC drivetrain set
DF-03 D-Parts Rear Upright Hub Carrier Set

Axes & drive shafts

DF-03 D-Parts Rear Upright Hub Carrier Set

300051251

€9.59

The DF-03 D-Parts Rear Upright Hub Carrier set is a chassis-specific replacement set for the DF-03 platform, supplying the molded parts used in the rear upright and hub carrier area. With 1 D parts tree and 6 parts in the box, it gives the build a direct source for the designated components when maintenance, rebuild work or part replacement is due. The set is focused on one defined chassis section rather than a mixed hardware assortment, which keeps part selection clear during workshop use. The molded layout on the runner helps identify each piece before removal and fitting, especially when comparing worn parts against fresh replacements. Because the set is tied to the DF-03 chassis, it suits repairs that need the matching geometry and mounting form for that platform. The rear upright and hub carrier area plays a key role in how the corresponding rear assembly is put together, so using the intended parts helps restore the specified structure of that section. On the bench, this set fits naturally into routine servicing, rebuilds after heavy running, or a planned stock of spare chassis parts. It also works well as a replacement pack to keep alongside a DF-03 model, so the required rear section components are on hand when a damaged part needs to be exchanged.  Warning! Not suitable for children under 14 years.

DF-03 D-Parts Rear Upright Hub Carrier Set
DF-03 Gear Parts Bag, RC spare parts set

Gears & motor pinions

DF-03 Gear Parts Bag, RC spare parts set

309400411

€39.99

The DF-03 Gear Parts Bag for 58370 focuses on one of the most important working areas in an RC drivetrain: the differential. This spare parts set brings together the core service components needed when the original assembly shows wear, so the drive system can return to clean, controlled power delivery under load. The set is presented as a dedicated bag for the DF-03 and, based on the included contents, covers the internal differential hardware rather than general chassis maintenance. Visible parts include a large metal gear with shaft, a smaller metal gear, 2 black outdrives, 2 black differential housings or cams, 4 large shim washers, additional small shims and washers, 2 metal pins, 2 groups of ball bearings, 6 white bushings or spacers, 4 coil springs, and a tube marked Ball Diff Grease. That combination supports rebuild work, replacement of worn running parts, and fine adjustment of the differential stack. On the bench, the mix of gears, bearings, shims and grease gives a clear route for servicing a used transmission assembly or refreshing a stored chassis before the next run. As a model-specific spare parts bag for 58370, it also helps keep maintenance organised when a DF-03 build needs the correct drivetrain components close at hand.  Warning! Not suitable for children under 14 years.

DF-03 Gear Parts Bag, RC spare parts set
DF-03Ra Assembly Universal Shaft RC Parts Set

Axes & drive shafts

DF-03Ra Assembly Universal Shaft RC Parts Set

300053792

€35.49

The DF-03Ra Assembly Universal Shaft brings a serviceable drivetrain upgrade to compatible RC chassis, combining a ball cardan shaft layout with high-precision machining that reduces the stalling feel during steering and supports smoother cornering. In the workshop or at the track, the metal shaft parts, pins and couplers form a focused tuning set for driveline maintenance and response. The scope of delivery contains 1 ball cardan shaft set with 13 pieces. Visible set contents include 2 long shafts marked 39, joint hardware, pins, set screws, an L-shaped hex key and AW anti-wear grease for the moving contact points. The PTO shaft can be assembled and disassembled, which allows worn consumable parts to be exchanged instead of replacing the whole assembly. That serviceable layout helps keep the driveline working with the same intended action over repeated running sessions. Compatibility is specified for TT-02 chassis, TT-02D chassis, TT-02FT chassis, TT-01 TYPE-E chassis and TT-01D TYPE-E chassis when combined with the listed companion parts. This makes the set suited to targeted repair work, drivetrain upkeep and handling-focused tuning where steering load and cornering smoothness matter most.  Warning! Not suitable for children under 14 years.

DF-03Ra Assembly Universal Shaft RC Parts Set
Diff. Gear Bag Grasshopper Hornet Spare Parts

Gears & motor pinions

Diff. Gear Bag Grasshopper Hornet Spare Parts

319115010

€6.49

This spare parts set is made for differential service on compatible Grasshopper and Hornet RC models. Supplied as a 6-piece gear bag, it focuses on one specific drivetrain area and gives repair or rebuild work the matching gears needed for a direct replacement task. The set belongs to the model supplies range and is intended for maintenance rather than first-time vehicle assembly. By concentrating on the differential section, it helps address wear in a part of the drivetrain that affects power transfer during running. The bag format keeps the relevant gears grouped together for workshop use, whether the job involves replacing worn parts or refreshing an older compatible chassis. Compatibility is stated for Grasshopper and Hornet, so the set can be selected for those named models without adding unrelated universal-fit claims. On the bench, this kind of replacement set fits routine upkeep, targeted repairs and parts storage for future service work. It is a focused choice for RC model maintenance where the differential needs the correct matching gear components rather than a general mixed spares assortment.

Diff. Gear Bag Grasshopper Hornet Spare Parts
DN-01/M-Ch. 1-piece Steel Front Axle & Hub

Axes & drive shafts

DN-01/M-Ch. 1-piece Steel Front Axle & Hub

300022106

€12.29

This 1-piece steel front axle and hub set brings a specific DN-01SR front-end layout to compatible chassis builds and parts replacement work. Taken from the DN-01SR Chassis Kit, Item 58761, it combines the axle and hub in one steel component group for builders working on matching front suspension assemblies. Compatibility covers the DN-01SR chassis as well as M-08 and M-07 platforms, making the set relevant for several established on-road chassis lines. The part can also be used in place of Item 54996, the M-Chassis Lightweight One-Piece Aluminum Axle & Hub Set, when a build calls for this steel version instead. Separately sold spacers and screws are required for installation. The designation DN-01/M-Ch. 1-piece Steel Front Axle & Hub keeps the application clear for workshop sorting and parts planning. In a maintenance setup, the set supports worn front-end parts replacement with a chassis-matched component. During a fresh build or a parts change, the stated compatibility with DN-01SR, M-08 and M-07 helps narrow fitment quickly and keeps the front axle area aligned with the intended layout.

New
DN-01/M-Ch. 1-piece Steel Front Axle & Hub
Drive Shaft, RC spare part, steel, 45 mm

Axes & drive shafts

Drive Shaft, RC spare part, steel, 45 mm

309805551

€12.99

This RC spare part supplies 2 steel drive shafts at 45 mm length for model vehicle drivetrains that use ball differential drives. The shaft format matches Manta Ray and Fire Dragon applications named in the data, giving a direct way to replace worn drivetrain links while keeping the intended mechanical layout in place. Each shaft uses a long steel rod with formed ends that sit into the drivetrain connection points, where rotation is passed through the linked assemblies. The 45 mm measurement matters in this role because shaft length determines how the connected parts line up during running. With 2 identical pieces in the pack, both sides can be fitted with the same specification instead of mixing different lengths or constructions. The part is listed for bowling and ball differential drives, so the stated drivetrain type stays clear when selecting the replacement. This kind of spare part suits repair work, routine maintenance and the refresh of an older chassis that needs the original shaft format restored. It can also be paired with the matching ball cardan shafts named in the data when a compatible drivetrain setup is being completed with related components.

Drive Shaft, RC spare part, steel, 45 mm
Drive Shaft, spare part set for 58087 model

Axes & drive shafts

Drive Shaft, spare part set for 58087 model

309805370

€13.99

This spare part set provides 2 drive shafts for model 58087 and focuses on one clear job: replacing the matching drivetrain components with the correct designated parts. The shafts shown combine a long metal rod with white end connectors and protruding metal pins, giving the assembly the connection points needed for the intended mounting position. As a dedicated replacement set, the value lies in fit and function for the specified model rather than in generic compatibility. The 2-piece format suits repairs where both corresponding shafts are changed together, and it also supports planned maintenance when worn drivetrain parts need renewal. The metal rod section forms the main shaft body, while the molded end pieces create the shaped interfaces required by the assembly. This keeps the repair focused on the exact component group named in the set. On the workbench, these drive shafts suit routine servicing, rebuilds after wear, or the completion of an unfinished model that is missing original running parts. For collectors and builders maintaining model 58087, the set supplies the exact replacement category needed for a clean, model-specific repair.  Warning! Not suitable for children under 14 years.

Drive Shaft, spare part set for 58087 model
DT-02/03 Upright L/R, RC spare part set

Axes & drive shafts

DT-02/03 Upright L/R, RC spare part set

300555059

€10.19

The DT-02/03 Upright L/R is a dedicated RC spare part set for restoring the front end of compatible chassis builds. Supplied as left and right uprights, the set replaces the side-specific mounting pieces that support wheel assembly and connected steering or suspension movement during running. Its value lies in precise fitment for the DT-02 and DT-03 platform family, where a damaged upright can affect alignment and interrupt smooth operation. Replacing the affected parts with the correct upright pair helps bring the chassis back to its intended layout without changing unrelated assemblies. The compact parts format also suits the usual maintenance cycle of hobby-grade RC vehicles, where individual wear points are renewed as needed rather than swapping complete sections. For bench work, the set is easy to sort, store and match to the relevant repair task because the application is clearly defined in the designation. This spare part set fits naturally into routine buggy upkeep after repeated use, contact with track barriers or general wear in the front corner area. It also serves as a practical stock part in a workshop drawer, ready for scheduled maintenance or a direct replacement when a DT-02 or DT-03 chassis needs the correct upright on each side.  Warning! Not suitable for children under 14 years.

DT-02/03 Upright L/R, RC spare part set
DT-04 B Parts Uprights, chassis spare parts

Axes & drive shafts

DT-04 B Parts Uprights, chassis spare parts

300051755

€8.99

The DT-04 B Parts Uprights set brings together molded replacement components for the new DT-04 chassis, making it easier to restore worn mounting points or replace damaged running gear with matching parts. Black resin pieces for the front and rear sections keep the fit aligned with the original chassis layout, whether the workbench task is a targeted repair or a broader rebuild. Beyond the uprights, the set covers several key connection areas of the chassis. C-hubs support the front end structure, while damper stays provide the shock mounting sections used in the suspension setup. The steering linkage transfers servo movement through the steering assembly, and the servo horn forms the connection point between servo output and linkage movement. Hex hubs complete the wheel mounting area, so the set reaches across several mechanical zones instead of covering only one isolated part. This parts group suits maintenance sessions after heavy running, rebuilds of a used chassis, or keeping workshop stock ready for future repairs. It also helps when a fresh DT-04 build needs replacement pieces on hand for the steering, suspension and hub areas most likely to see regular service.  Warning! Not suitable for children under 14 years.

DT-04 B Parts Uprights, chassis spare parts
F Diff. Joint L & R, model spare parts for 58370

Gears & motor pinions

F Diff. Joint L & R, model spare parts for 58370

309808059

€20.99

F Diff. Joint L & R for 58370 supplies 2 dedicated spare parts for the front differential area, with one left and one right version matched to the named model reference. The black molded pieces show a technical, component-led form with flanged heads and split forked ends that suit connection points in a mechanical assembly. As model spare parts, these joints are intended for targeted maintenance rather than general upgrading. The paired L and R layout matters where the front drivetrain uses side-specific geometry, allowing the correct part to sit in the correct position instead of forcing a universal substitute. The visible shape of each piece supports that role: the cylindrical body forms the main connection section, while the forked end is made to interface with adjoining moving parts in the assembly. This keeps the focus on fit, alignment and restoring the original mechanical layout of 58370. On the workbench, the set suits planned servicing, replacement of worn front differential components, or completion of an existing build that needs the specified joints. The 2-part format keeps both sides of the front assembly covered in one pack, making it easier to match left and right positions during installation.  Warning! Not suitable for children under 14 years.

F Diff. Joint L & R, model spare parts for 58370
F101-F104 G-Parts Spur Gear Set, RC spare parts

Gears & motor pinions

F101-F104 G-Parts Spur Gear Set, RC spare parts

300050506

€10.29

The F101-F104 G-Parts Spur Gear M0.6/63Z set is a drivetrain spare-parts pack for selected RC chassis, centered on a 63-tooth main gear with module 0.6 gearing. It gives a direct replacement route for wear parts in the transmission area and keeps compatible running gear ready for service sessions, rebuilds and routine maintenance. The set is specified for F104PRO II, F104W, F104 and F103GT chassis. For the F104PRO II chassis, the data states that only the 63T06 spur gear is used. Scope of delivery contains 1x G-Parts tree with 7 pieces, grouping the gear and related molded components in one pack for organized parts handling at the bench. The black molded parts shown in the set include the large spur gear and smaller matching pieces shaped for mounting and spacing within the assembly. This spare-parts set suits drivetrain refresh work after regular use, replacement during a rebuild, or keeping key transmission components on hand between running sessions. In a workshop setup, the defined chassis compatibility and exact 63-tooth specification make it easier to match the correct gear set before installation.  Warning! Not suitable for children under 14 years.

F101-F104 G-Parts Spur Gear Set, RC spare parts
F103 Turnbuckle Tie Rod Set, RC spare parts

Axes & drive shafts

F103 Turnbuckle Tie Rod Set, RC spare parts

300053150

€14.99

The F103 Turnbuckle Tie Rod Set brings adjustable linkage hardware to the F103GT chassis in a compact 20-piece spare parts pack. At the center are 2 turnbuckle shafts in 3 x 42 mm size, built to create a tunable connection within the steering or rod linkage layout. A reverse screw on 1 side of each shaft allows the rod length to be changed by turning the shaft itself, which helps when alignment needs fine correction during maintenance or reassembly. Alongside the shafts, the set provides 6 adjusters and 4 cushion balls in 5 mm size, plus the related small hardware for mounting and connection. This combination supports the pivoting and threaded joints used in RC chassis linkages, where clean fit and measured adjustment matter more than fixed-length parts. The included parts are suited to replacing worn linkage components or restoring a chassis with matching hardware dimensions already specified in the set. On the bench, the set fits naturally into steering service, linkage renewal or a parts refresh for an F103GT build. The compact format also makes it useful to keep with workshop spares, so the required rods, adjusters and joint hardware are ready when a setup change or replacement is needed.  Warning! Not suitable for children under 14 years.

F103 Turnbuckle Tie Rod Set, RC spare parts
F104/F103 Special King Pin, model spare part

Axes & drive shafts

F104/F103 Special King Pin, model spare part

300053119

€4.49

The F104/F103 Special King Pin is a dedicated spare part for compatible F104 and F103 chassis, intended for maintenance, repair and ongoing setup work. As a king pin, it belongs to the front suspension area where precise alignment between steering and suspension components matters during rebuilds and replacement work. This part is supplied for the F104/F103 platform rather than as a generic hardware piece, which helps keep servicing focused on the correct chassis family. It suits replacing a worn or damaged king pin during routine maintenance, or keeping a matching spare ready in workshop storage for future repairs. The compact format also fits neatly into parts boxes and bench organisers used for model upkeep, making it easier to separate chassis-specific hardware from general screws and fittings. On the workbench, the part supports clean, direct replacement when a front-end rebuild is needed after running sessions or inspection. It also fits tuning and restoration tasks where the original suspension layout of an F104 or F103 chassis needs the correct replacement component rather than an improvised substitute.  Warning! Not suitable for children under 14 years.

F104/F103 Special King Pin, model spare part
FF-03 Spur Gear 68T M0.6, RC spare part

Gears & motor pinions

FF-03 Spur Gear 68T M0.6, RC spare part

300051423

€4.59

This spur gear brings a defined 68T tooth count and M0.6 pitch to compatible RC chassis, giving the drivetrain a concrete replacement part for service, repair and setup work. As a single main gear, it suits bench maintenance where a worn transmission component needs to be swapped for the correct specification. The part is listed for FF-03 chassis and FF-04 EVO chassis, and it also covers a broad compatibility range across TD4, TD2, TA06, TA06 MS, TA06 PRO, TA07 PRO, TA08 PRO, TT-02, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02D, TT-02RR, XV-02PRO, XV-01, XV-01 PRO and XV-01T chassis. That spread makes it relevant for racers and builders managing several platforms within one workshop. On TT-02 based cars, use can also apply to vehicles equipped with 54500. For TT-02RR chassis, the gear is listed as kit standard equipment. In practical use, this is the kind of transmission part kept on hand for routine rebuilds, drivetrain refreshes and chassis-specific parts planning. The single-piece scope of delivery keeps the replacement straightforward when preparing a compatible touring, front-wheel-drive or rally platform for the next maintenance session.  Warning! Not suitable for children under 14 years.

FF-03 Spur Gear 68T M0.6, RC spare part
Front Upright Set, model spare parts, MB10/11

Axes & drive shafts

Front Upright Set, model spare parts, MB10/11

319808262

€18.49

This front upright set supplies 2 matching metal parts for MB10/11, with left and right versions shaped as a mirrored pair for front-end replacement work. The silver finish and compact machined form give each piece a clean mechanical look, while the curved arm and pivot section point to a defined mounting role within the assembly. Each upright shows a circular attachment hole at one end and a rounded housing at the other, creating the connection points needed for a controlled mechanical fit. A vertical cylindrical shaft extends from each part and ends in a threaded screw tip, adding a fastening detail that supports installation into the intended front assembly position. One housing appears to carry internal threading, indicating that the two sides are not interchangeable and are made for their specific left or right placement. This set suits repair, maintenance or parts replacement on a compatible MB10/11 model where worn or missing front hardware needs a like-for-like component shape. Kept as workshop spares or fitted during a rebuild, the pair provides the dedicated geometry needed for accurate front-end restoration.  Warning! Not suitable for children under 14 years.

Front Upright Set, model spare parts, MB10/11
Front Upright Set, RC spare part for Tamiya chassis

Axes & drive shafts

Front Upright Set, RC spare part for Tamiya chassis

300051352

€6.19

This front upright set supplies 2 steering knuckles for the front axle of compatible RC chassis, giving the steering assembly the exact mirrored left and right parts needed for repair or routine maintenance. The shape with circular axle openings and multiple mounting points supports correct integration into the front suspension area, where precise alignment matters for wheel guidance and steering movement. The set is listed for a wide range of chassis platforms: FF-04 EVO, FF-03, FF-03 PRO, TA07 MS, TA07 PRO, TA06 MS, TA06, TA06 PRO, TA05 Ver. II, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS and TT-02 TYPE-S. That broad compatibility makes this pair useful for keeping several touring car and front-wheel-drive builds in running condition with one clearly matched spare. The scope of delivery contains 2 front steering knuckles from C-Parts TB-03. In workshop use, this pair suits worn, damaged or missing front uprights on supported chassis and helps return the front end to its intended mounting layout. It also serves as a practical stock spare for regular service between driving sessions, especially on platforms that share steering and suspension hardware.  Warning! Not suitable for children under 14 years.

Front Upright Set, RC spare part for Tamiya chassis
Gear Bag for 58340, model spare gear set

Gears & motor pinions

Gear Bag for 58340, model spare gear set

309335432

€7.19

This gear bag for 58340 brings the drivetrain back into service with 4 replacement parts shaped for geared power transfer. The set contains white injection-moulded components shown as 2 large gears, 1 smaller double pinion gear and 1 circular cover plate with 3 mounting holes, giving the gearbox area the core parts needed for a targeted repair. The larger gear with a raised cylindrical hub works alongside the second large toothed gear, while the smaller double pinion links motion between stages of the transmission. That layout points to reduction and transfer inside the gearbox rather than cosmetic trim, so the set is suited to maintenance where worn teeth, missing internals or damaged drive parts interrupt movement. The separate cover plate closes the assembly at the matching mounting points and helps return the parts to their intended position inside the housing. Used during a rebuild, service interval or parts replacement, this set supports focused work on the transmission section of 58340 without replacing unrelated assemblies. It also fits neatly into a spares collection for model maintenance, where keeping the correct gears on hand can shorten downtime between bench work and the next run.  Warning! Not suitable for children under 14 years.

Gear Bag for 58340, model spare gear set
Gear Box Joint, replacement part for 43520

Axes & drive shafts

Gear Box Joint, replacement part for 43520

309804237

€8.99

The Gear Box Joint set for 43520 supplies 2 matching replacement parts for a drivetrain connection point where accurate fit matters. The machined metal finish and compact cylindrical form suit technical model maintenance, helping restore a clean mechanical link in the gearbox area when an original joint is worn, damaged or missing. Each joint is shaped as a dedicated spare for use with model number 43520 rather than as a generic workshop component. The 2-piece format provides a matched pair for repair planning and parts storage, which is useful when both sides of a mechanism need the same connection standard. The metal construction supports a precise seating surface at the contact point, which matters in assemblies where connected parts need to meet cleanly. As a small drivetrain component, this set fits naturally into regular service work on running models and mechanical rebuilds. On the workbench, the pair can be kept ready for scheduled maintenance or used to replace a failed connection during a repair session. For model builders who maintain existing vehicles over time, dedicated spare parts like these help keep compatible assemblies operating with the intended hardware.  Warning! Not suitable for children under 14 years.

Gear Box Joint, replacement part for 43520
GF-01 Full Ball Bearing Set, chassis accessory

Axes & drive shafts

GF-01 Full Ball Bearing Set, chassis accessory

300054924

€39.99

The GF-01 Full Ball Bearing Set is a chassis accessory made to give GF-01 models a complete bearing upgrade with the exact quantities needed in one pack. The set contains 24 x 1150 ball bearings and 2 x 850 ball bearings, replacing the standard bearing arrangement at the rotating points across the chassis. By swapping in ball bearings for the kit standard plastic and metal bearings, the running gear can turn with less drag and a more consistent mechanical feel. The different bearing sizes cover the positions required by the GF-01 layout, so the set is built around the chassis rather than a generic assortment of parts. The compact metal components suit maintenance work, rebuilds and planned performance upgrades where efficient rotation matters. On the bench, the set supports a straightforward refresh of a used GF-01 runner or a more refined specification for a fresh chassis build. Once fitted, the smoother movement through the rotating assemblies helps the model make cleaner use of its available power during regular driving sessions.

GF-01 Full Ball Bearing Set, chassis accessory
Hard Joint Cup-Set Gear Differential Spare Part

Gears & motor pinions

Hard Joint Cup-Set Gear Differential Spare Part

300053218

€14.99

This spare part set combines a differential output with a hardened cone differential for gear differential service on compatible model vehicles. The pairing suits focused drivetrain maintenance where the differential assembly needs renewal with the two named components supplied together. The hardened cone differential is the key technical element in the set, adding a wear-oriented replacement part for rebuilds and repair work. In a gear differential, this component supports the transfer of drive through the transmission while the differential output forms the matching connection point within the assembly. The scope of delivery is clearly defined as 1 differential output and 1 hardened cone differential, which helps when planning a direct replacement around the existing drivetrain layout. The set is intended as an accessory and replacement component rather than a complete model. On the workbench, this combination fits routine servicing, repair after drivetrain wear, or preparation of a compatible chassis for further running. It also suits parts storage for model maintenance, where a clearly specified differential set can be kept ready for the next rebuild.  Warning! Not suitable for children under 14 years.

Hard Joint Cup-Set Gear Differential Spare Part
Left Upright Front, RC spare part with ball stud

Axes & drive shafts

Left Upright Front, RC spare part with ball stud

300445169

€6.99

This front left upright is a dedicated spare part for the Stadium Blitzer and is intended to restore a specific suspension or steering connection point in the front corner assembly. The molded piece combines a compact arm shape with a central round mounting hole, creating the defined pivot location needed for the surrounding mechanism to sit correctly. A brass-colored ball stud at one end adds the articulated connection point for the linked assembly. The upright also carries a silver metal shaft with a threaded tip, which provides the fastening point for installation into the matching front section. Reinforced ribs in the molded body support the shape of the part around the mounting area, while the white finish makes the component easy to identify during maintenance or parts sorting. Supplied as 1 piece, it is specified as the front left version rather than a universal side-to-side replacement. This kind of spare part suits focused repairs after wear, damage or a missing original component in the Stadium Blitzer. Kept in a workshop drawer or parts box, it supports routine maintenance and helps return the front assembly to its intended mechanical layout with the correct left-side geometry.  Warning! Not suitable for children under 14 years.

Left Upright Front, RC spare part with ball stud
M-05 Ball Bearing Set, chassis accessory, 18 pcs

Gears & motor pinions

M-05 Ball Bearing Set, chassis accessory, 18 pcs

300054179

€41.49

The M-05 Ball Bearing Set is a chassis accessory made for M-05 machines and brings the full bearing count needed for a focused running gear update into one pack. With 18 metal ball bearings in 2 specified sizes, it supports smoother mechanical movement at the points where rotating parts meet, helping the chassis run with less drag during regular use. The set contains 6 x 850 ball bearings and 12 x 1150 ball bearings, matching the size combination stated for M-05 chassis compatibility. That size split makes the set useful for planned maintenance as well as for replacing worn bearings during a rebuild. In an RC chassis, ball bearings sit at key rotating points and reduce friction compared with basic bushings, which can help the drivetrain turn more freely and keep the response of the running gear more consistent. The silver-coloured metal finish reflects the precision-part character of the set and fits the technical look of workshop spares and tuning parts. On the bench, this bearing set suits routine chassis servicing, parts replacement after extended running, or preparation for a cleaner rolling setup before the next session. It also works as a practical stock part for M-05 owners who prefer to keep the specified 850 and 1150 bearing sizes ready for future maintenance.

M-05 Ball Bearing Set, chassis accessory, 18 pcs
M-05 C-Parts, suspension spare parts set

Axes & drive shafts

M-05 C-Parts, suspension spare parts set

300051391

€17.49

The M-05 C-Parts suspension spare parts set supplies the designated C section for several compact Tamiya chassis, making it a practical choice when suspension-related components need replacement during maintenance or repair. With 46 pieces on 1 parts tree, the set groups matching molded sections together for rebuild work on compatible RC car platforms. Compatibility covers M-06, M-06 PRO, M-05 ver.Ⅱ PRO, M-05, M-05 PRO and MF-01X chassis. That broad fit makes this set useful for workshops, spare parts storage and ongoing running repairs across more than one chassis type. The molded parts format also helps identify and separate the required sections before installation, which keeps rebuild work organized when replacing worn or damaged areas. Scope of delivery: 1x C parts, 46 pieces. This spare parts set suits routine servicing after track use, collision damage or part loss during disassembly. It also fits planned refresh work on an existing chassis, where keeping the correct designated section on hand can shorten downtime between maintenance sessions.  Warning! Not suitable for children under 14 years.

M-05 C-Parts, suspension spare parts set
M-05 F-Teile, spare parts set, wheel hub

Axes & drive shafts

M-05 F-Teile, spare parts set, wheel hub

300051393

€9.39

The M-05 F-Teile set is a dedicated spare parts pack for compatible Tamiya chassis, supplying 12 replacement components for maintenance on running gear assemblies. The set is intended for M-06, M-06 PRO, M-05 ver.II PRO, M-05 and M-05 PRO chassis, making it a practical match when original parts need replacement after regular use. The included F parts are shown as black moulded resin components with multiple mounting holes, pivot points and axle or bearing openings shaped for their specific positions in the assembly. Left and right mirrored forms support correct placement during rebuilds, while the mix of upright, hub and small insert style pieces helps address wear in connected front-end areas. This kind of chassis-specific parts pack is useful when keeping an existing RC car in running condition rather than replacing a full assembly. On the bench, the set suits routine servicing, repair after contact damage, or preparation of a second chassis for use with the same platform family. It also helps maintain parts support across several related M chassis versions, which is useful for hobby setups that rotate between M-05 and M-06 based builds.  Warning! Not suitable for children under 14 years.

M-05 F-Teile, spare parts set, wheel hub
M-05Ra F-Parts, RC chassis parts set

Axes & drive shafts

M-05Ra F-Parts, RC chassis parts set

300051425

€9.99

The M-05Ra F-Parts set is a dedicated RC chassis parts set for the M-05 RA chassis, centered on the upright front and rear area. With 21 pieces in 1 F-parts frame, it provides the specific molded shapes needed when a suspension or steering section has to be rebuilt with matching left and right components. The set contains black molded parts with multiple mounting holes, cylindrical pivot sections and forked connection points. These details matter during assembly because they define how links, axles and adjacent hardware sit in the chassis. The layout shown for the parts also includes small spacers, washers and connector plates, which support alignment and spacing in the assembled upright section. Rather than replacing unrelated sections, this set addresses one clearly defined area of the M-05 RA platform. That focused fitment suits maintenance after heavy running, accident damage or a full chassis refresh. It also helps when keeping a build consistent with the original M-05 RA configuration, using parts intended for that exact platform. The scope of delivery contains 1x F parts set with 21 pieces.  Warning! Not suitable for children under 14 years.

M-05Ra F-Parts, RC chassis parts set
M-07 Concept Spur/Counter Gear RC Spare Set

Gears & motor pinions

M-07 Concept Spur/Counter Gear RC Spare Set

300051601

€4.59

The M-07 Concept Spur/Counter Gear set is a model-specific transmission spare for M-07 Concept chassis cars, supplying the 2 molded gearbox gears needed for a full internal replacement. The set contains 1 main spur gear and 1 counter gear, each formed as a compound gear so the paired tooth counts work together inside the gearbox. The spur gear is specified as 37T/21T and the counter gear as 29T/23T. Those tooth combinations are the key mechanical detail of the set, because they determine how the gears mesh across the transmission stages in the M-07 Concept gearbox. As replacement parts, these gears are intended to renew the internal drive path where wear or damage affects smooth running. The studio image shows white molded gears with fine, evenly spaced teeth, hollow center openings and integrated stepped sections shaped for their gearbox positions. This set suits routine drivetrain maintenance on an M-07 Concept chassis car or a targeted gearbox rebuild after heavy use. Kept in a pit box, workshop drawer or spares case, the matched pair gives a direct way to restore the complete gearbox with the specified gear combination for this chassis platform.  Warning! Not suitable for children under 14 years.

M-07 Concept Spur/Counter Gear RC Spare Set
M-08/M-07/TA06 Gear Diff. Gasket (2), spare part

Gears & motor pinions

M-08/M-07/TA06 Gear Diff. Gasket (2), spare part

300051464

€2.69

This spare part set provides gear differential gaskets for compatible Tamiya chassis and supports clean, precise maintenance of the cone differential area. The pack contains 4 flat gaskets, each formed as a circular seal with a shaped center opening, 4 inward tabs and 4 outer holes for the matching mounting pattern. Compatibility covers M-08 CONCEPT, M-07 CONCEPT, TA06, TA06 PRO, TA06 MS, TA05 Ver.II, TD2, TD4, DB01, FF-04 EVO, TRF503, TRF211XM, TRF201XMW, XV-01, XV-01 PRO and XV-01T chassis. For specific setups, TA05 Ver.II uses the gasket with 54312, DB01 uses it with 54329, and TD4 and TD2 use it with 54471. The thin gasket format suits replacement during differential service when worn or compressed seals need to be exchanged for matching new parts. In workshop use, the 4-piece pack supports repeated maintenance sessions or more than one compatible chassis in the collection. The clearly defined cut shape helps align the gasket with the cone differential section during installation, keeping service work focused on fit and correct parts matching.  Warning! Not suitable for children under 14 years.

M-08/M-07/TA06 Gear Diff. Gasket (2), spare part
MB-01 29T Pinion Module 0.6, RC pinion gear

Gears & motor pinions

MB-01 29T Pinion Module 0.6, RC pinion gear

300051726

€5.39

The MB-01 29T Pinion Module 0.6 is a drivetrain spare part made for the Tamiya MB-01 chassis. With 29 teeth and module 0.6 gearing, it gives the transmission a clearly specified replacement component for maintenance work, rebuilds and planned parts stocking around an existing MB-01 setup. The compact gear uses a toothed outer profile and a central mounting hole to sit in the drive system as intended for this chassis platform. The engraved 29 marking provides a quick visual check during bench work, which helps when matching the installed ratio to workshop notes or separating parts between different builds. As a single-piece replacement, it suits targeted servicing where one worn pinion needs to be exchanged rather than a full drivetrain refresh. The metal construction also makes it a natural fit for a mechanical assembly that depends on accurate tooth engagement. In workshop use, this pinion gear supports routine transmission maintenance, parts sorting and chassis-specific repairs. It also works well as a spare kept alongside other MB-01 running gear, ready for rebuild sessions or for replacing a used gear after repeated track time.  Warning! Not suitable for children under 14 years.

MB-01 29T Pinion Module 0.6, RC pinion gear
MB-01 C-Parts Transmission Spare Parts Set

Axes & drive shafts

MB-01 C-Parts Transmission Spare Parts Set

300051721

€7.19

The MB-01 C-Parts Transmission set supplies replacement drivetrain parts for the MB-01 chassis, centering on the transmission area where matched fit matters most. Black molded components and metal shaft sections form a compact service set for restoring the original mechanical layout with the specified C-parts. Included are differential cup joints, axle shafts, dogbone shafts and propeller shafts, grouped for transmission-related maintenance on the MB-01 platform. The forked cup pieces and connecting shafts handle the mechanical link between rotating drivetrain sections, while the smaller spacers and retaining hardware shown in the set support correct assembly of the replacement parts. This makes the set useful when worn or damaged transmission components need to be exchanged with the designated matching parts rather than improvised substitutes. On the workbench, the set supports targeted repair of an MB-01 drivetrain without changing to a different chassis standard. It suits routine maintenance, rebuilds after heavy running, or keeping spare transmission components ready for the next service interval on an MB-01 model.

MB-01 C-Parts Transmission Spare Parts Set
MB-01 D-Parts Gearbox, chassis spare parts

Gears & motor pinions

MB-01 D-Parts Gearbox, chassis spare parts

300051722

€9.49

The MB-01 D-Parts Gearbox brings together key chassis components for repair, maintenance and parts replacement on the MB-01 platform. This sprue covers several of the mechanical sections that shape the layout of the chassis, with moulded parts for the drivetrain area, deck structure and steering system arranged as one matched set. Alongside the motor mount, gearbox and upper deck, the set also provides an R/C equipment deck and wheelbase adjustment parts for the MB-01 chassis. The black moulded pieces show reinforced ribbing, axle openings, hinge points and screw locations that suit structural mounting and gearbox housing tasks within the chassis build. Because these parts are supplied together on the D-Parts sprue, matching sections can be replaced with the correct group intended for the same platform. This set suits workshop use when an MB-01 chassis needs worn or damaged sections exchanged, or when a stored build is being returned to running condition with the proper chassis hardware. It also fits ongoing bench maintenance where drivetrain housings, steering mounts or deck sections need the original replacement parts for the model.  Warning! Not suitable for children under 14 years.

MB-01 D-Parts Gearbox, chassis spare parts
MB-01 G-Parts Gears, chassis parts set

Gears & motor pinions

MB-01 G-Parts Gears, chassis parts set

300051723

€4.79

The MB-01 G-Parts Gears set supplies drivetrain-related replacement parts for the MB-01 chassis, centered on a G-Parts sprue with a 65T spur gear and differential components. This layout gives the chassis a direct source for key internal gear parts when wear, damage or a full teardown calls for fresh hardware. Within the sprue, the 65T spur gear serves as a defined transmission component rather than a generic gear, while the differential parts address another separate section of the drivetrain. Keeping these parts grouped under the G-Parts designation helps match them to the MB-01 platform during workshop sorting and chassis maintenance. The set is aimed at repair, servicing and parts replacement for an existing model, not at a complete vehicle build. No scale is stated in the data, and the pack is identified specifically for the MB-01 chassis. On the bench, this set fits naturally into routine gearbox service, differential refresh work or a rebuild after heavy use. It also suits keeping a dedicated replacement sprue on hand for the MB-01, so the correct gear and matching internal parts are ready when the chassis is opened for maintenance.

MB-01 G-Parts Gears, chassis parts set
MB-01 M-Parts, chassis spare parts sprue

Axes & drive shafts

MB-01 M-Parts, chassis spare parts sprue

300051724

€5.39

The MB-01 M-Parts sprue brings together several of the chassis pieces that matter most when an MB-01 build needs replacement hardware rather than a full new kit. This set is centered on the MB-01 platform and groups key black molded parts on one sprue, making it a practical match for repair work, routine maintenance, or keeping workshop stock ready for the next rebuild. Alongside suspension arms, the sprue also carries body mounts, a bumper and damper shafts, covering parts that sit across the running gear and upper mounting structure. That mix is useful when wear or impact affects more than one area at once, because the set addresses several connected mounting points in a single purchase. The molded layout also helps identify each piece before removal from the sprue, which keeps preparation straightforward at the bench. As a chassis parts set rather than a complete vehicle, it focuses on restoring original MB-01 component positions and connections. On the workbench, this sprue suits planned servicing as well as targeted replacement after track contact or repeated running sessions. It can be kept as a ready spare for an existing MB-01 chassis or used when a rebuild calls for fresh molded components in the suspension and body support areas.

MB-01 M-Parts, chassis spare parts sprue
Pinion Gear-Set 16/17T Alu M0.6 for RC Chassis

Gears & motor pinions

Pinion Gear-Set 16/17T Alu M0.6 for RC Chassis

300050354

€8.99

This aluminum pinion gear set brings 2 tooth-count options to compatible RC chassis, with one 16T gear and one 17T gear in M0.6 pitch for drivetrain replacement or gearing changes. The silver-finish parts have a compact machined form, and each pinion is secured with a grub screw for firm mounting on the motor shaft. The set is intended for clearly defined chassis combinations rather than general use. TT-02FT, M-05, M-05 PRO, M-05 ver.II PRO, M-06 and M-06 PRO chassis use only the 16T gear. XV-02PRO, TA07 PRO, TA08 PRO and M-08 CONCEPT chassis use only the 17T gear. For F104PRO II chassis, the set is used with 51609. For TA07 MS chassis, only the 17T gear is usable and it is used with 51356, 51423 and 51548. Scope of delivery: 2 pinions and 2 grub screws. That makes the set a practical choice for workshop stock, scheduled maintenance or a direct replacement when a specific chassis calls for one of these tooth counts. In a bench setup, the stamped 16 and 17 markings help identify the correct gear quickly before installation, keeping chassis-specific drivetrain work clear and organized.  Warning! Not suitable for children under 14 years.

Pinion Gear-Set 16/17T Alu M0.6 for RC Chassis
Pinion Gear-Set 18/19T Alu M0.6, RC gear set

Gears & motor pinions

Pinion Gear-Set 18/19T Alu M0.6, RC gear set

300050355

€9.99

The Pinion Gear-Set 18/19T Alu M0.6 brings 2 aluminum motor pinions into one compact drivetrain set, with 18T and 19T tooth counts for compatible Tamiya chassis. Each gear mounts with a grub screw, creating a firm connection on the motor shaft for controlled power transfer through the drivetrain. This set is intended for tuning, replacement and maintenance work across several chassis families. It fits M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, WR-02, WR-02G, WR-02C and WR-02CB chassis. Use on some platforms follows specific tooth-count rules: GF-01CB uses only the 18T pinion, while TT-01 TYPE-E and TT-01D TYPE-E use only the 19T pinion. F104PRO II uses the set with 51609, TA07 MS Chassis uses it with 51356, 51423 and 51548, and F103GT uses only the 18T pinion with 50506. In workshop use, the 2 included pinions give a straightforward way to compare gearing options during a rebuild or drivetrain refresh. The M0.6 specification keeps the set aligned with matching gear applications, whether the goal is restoring a worn drive part or preparing a chassis for a different running setup.  Warning! Not suitable for children under 14 years.

Pinion Gear-Set 18/19T Alu M0.6, RC gear set
Pinion Gear-Set 22/23T Alu M0.6, RC gear set

Gears & motor pinions

Pinion Gear-Set 22/23T Alu M0.6, RC gear set

300050357

€9.99

This pinion gear set brings 2 aluminum motor pinions into one compact drivetrain upgrade for compatible RC chassis. With 22T and 23T tooth counts and an M0.6 specification, it supports clear gearing choices when adjusting acceleration response or matching a replacement part during maintenance. Each pinion is machined with a central bore and a side threaded hole for the grub screw, so the gear mounts directly to the motor shaft in a straightforward mechanical layout. The included contents are 2 pinions and 2 grub screws. The 22T and 23T markings on the gears make identification quick during setup, storage or parts sorting. Aluminum construction keeps the set focused on a precise drivetrain component rather than a general hardware mix. For TT-01 TYPE-E chassis, the set offers both tooth-count options, while TT-01D TYPE-E chassis can use only the 22T gear. On the bench, this set suits routine replacement work, ratio comparison between 22T and 23T, or keeping a second pinion ready in the parts box for compatible RC running sessions. It also fits neatly into a workshop stock of drivetrain spares where exact tooth count and pitch matter.  Warning! Not suitable for children under 14 years.

Pinion Gear-Set 22/23T Alu M0.6, RC gear set
Pinion Gear-Set 24/25T Alu M0.6, motor pinion set

Gears & motor pinions

Pinion Gear-Set 24/25T Alu M0.6, motor pinion set

300050477

€10.79

This motor pinion set brings a focused drivetrain upgrade to compatible RC chassis with 2 aluminum pinions in 24T and 25T plus 2 grub screws for mounting. The M0.6 gear specification makes it a targeted choice for model builders who need the correct tooth pitch for matching transmission parts and a clean fit on the motor shaft. The set is intended for several established chassis platforms in the Tamiya range. It fits M-07 CONCEPT and M-08 CONCEPT chassis, with the note that only the 24T pinion can be used on M-08 CONCEPT. It also fits TT-01 TYPE-E and TT-01D TYPE-E chassis, where it is used with 53665. That compatibility detail matters during drivetrain setup, because the pinion must match both the chassis layout and the related gear components already in use. The aluminum construction adds a crisp machined finish and a precise look that suits technical RC assemblies. On the bench, this set supports replacement work after wear or a gearing change during a fresh build. In workshop use, the 2 included pinions give a direct choice between 24T and 25T, while the grub screws complete the mounting hardware needed for installation.  Warning! Not suitable for children under 14 years.

Pinion Gear-Set 24/25T Alu M0.6, motor pinion set
Shaft 2 x 9.8 mm, model spare part, 10 pcs

Axes & drive shafts

Shaft 2 x 9.8 mm, model spare part, 10 pcs

309805776

€3.99

This spare shaft set brings exact replacement dimensions to model maintenance with 10 steel shafts measuring 2 x 9.8 mm. The compact format suits small mechanical assemblies where a worn, bent or missing shaft can affect how connected parts sit and move. The 2 mm diameter and 9.8 mm length give a clear reference for matching an existing part before installation. As a workshop consumable, the set supports repeated servicing across compatible hobby models instead of relying on a single replacement piece. The short shaft format is suited to detail areas where space is limited and clean alignment matters. Keeping identical spares on hand can simplify routine upkeep when several connection points use the same measurement. In a home workshop, club pit area or model bench, this shaft pack fits neatly into regular maintenance supplies for ongoing repair work. It also serves as a practical stock addition when checking assemblies, replacing lost hardware or preparing compatible builds for the next running session.  Warning! Not suitable for children under 14 years.

Shaft 2 x 9.8 mm, model spare part, 10 pcs
TA-01 DF-01 G Parts Gear Set for RC Models

Gears & motor pinions

TA-01 DF-01 G Parts Gear Set for RC Models

309005322

€14.99

The TA-01/DF-01 G-Parts gear set focuses on the mechanical core of compatible RC model assemblies, with injection-moulded components shaped for drivetrain and gearbox-related service work. Visible in the set are a large spur gear with an integrated central bevel gear, 2 medium cylindrical gears with fine outer teeth, smaller gear-form parts on a sprue, and 2 round disc-shaped pieces with raised pegs and centre holes. These parts support repair and replacement tasks where worn, missing or damaged transmission elements affect the running condition of a TA-01 or DF-01 based build. The different tooth forms, mounting holes and moulded connection points indicate use in geared drive sections rather than body or decorative areas. As unassembled service parts, the set gives builders the correct component shapes needed for maintenance without requiring improvised substitutions. On the workbench, the clearly separated moulded pieces help with checking fit before installation and with comparing old and new parts during a rebuild. This makes the set useful for planned servicing as well as for bringing an older chassis back into operating condition after drivetrain wear or gear damage.  Warning! Not suitable for children under 14 years.

TA-01 DF-01 G Parts Gear Set for RC Models
TA-01/02/DF-01 Ball Diff. Unit, RC spare part

Gears & motor pinions

TA-01/02/DF-01 Ball Diff. Unit, RC spare part

300053070

€43.99

The TA-01/02/DF-01 Ball Diff. Unit is a dedicated RC spare part for compatible TA-01, TA-02 and DF-01 chassis, bringing the differential section back into working order with a matching replacement assembly. As a ball differential, it is intended for the drivetrain, where controlled internal movement helps manage how drive is transferred through the gearbox during running. The set is supplied as 1 ball differential with 8 pieces, giving the core parts needed for this specific maintenance job rather than a mixed assortment of unrelated hardware. The accompanying assembly information refers to ball differential grease during installation, showing that this unit is built as a serviceable mechanical component rather than a sealed module. Documented elements such as the differential spur gear, gearbox joint, hexwrench steps and placement notes point to a structured assembly sequence with attention to part orientation. That makes the unit relevant for repair benches, rebuild projects and routine drivetrain upkeep on older compatible chassis. In workshop use, the unit fits naturally into a maintenance cycle that includes inspection, replacement of worn drivetrain parts and reassembly of the gearbox area. For existing TA-01, TA-02 or DF-01 models, it provides a direct route to keeping a compatible chassis in running condition with the correct differential format.  Warning! Not suitable for children under 14 years.

TA-01/02/DF-01 Ball Diff. Unit, RC spare part
TA-01/02/FF-01 C-Parts, rear upright spare set

Axes & drive shafts

TA-01/02/FF-01 C-Parts, rear upright spare set

310005377

€12.79

The TA-01/02/FF-01 C-Parts rear upright set is a chassis-specific spare for compatible Tamiya models, supplying the moulded parts needed in the rear upright area on a single black sprue. For repair, maintenance or a careful rebuild, the matched layout keeps related pieces together and ready for selection at the bench. The injection-moulded frame holds several components in their original positions until removal, which helps preserve part identification during preparation and fitting. Mirrored shapes for left and right assembly can be checked before cutting from the runner, reducing mix-ups when replacing worn or damaged suspension-side parts. The sprue format also supports clean storage between repair sessions, since unused pieces remain attached and easier to track than loose small parts. Visible moulded markings on the runner further reflect its role as a functional service part for model maintenance. This spare set fits situations where a compatible chassis needs renewed rear upright components after use, damage or a missing part in a long-running build. It also suits keeping a dedicated replacement sprue on hand for workshop stock, so servicing can stay focused on the exact chassis section rather than replacing unrelated assemblies.

TA-01/02/FF-01 C-Parts, rear upright spare set
TA-01/02/TB-01/02/TG Wheel Axle Set, RC spare part

Axes & drive shafts

TA-01/02/TB-01/02/TG Wheel Axle Set, RC spare part

300050808

€12.79

This RC spare part set supplies 2 metal wheel axles for compatible TA-01/02, TB-01/02 and TG chassis, giving a direct replacement option where a 39 mm axle is specified. The machined shape combines a threaded end, a cross-hole and a slotted coupling section, so the part matches the connection points used in these model vehicle platforms. The 39 mm format is the key reference for installation planning and parts matching. The pair layout supports side-to-side replacement with matching hardware rather than mixing old and new axle parts. The metal construction shown in the data suits a mechanical role where rotation, fastening and drivetrain connection meet in one compact component. Because the set is defined for TA-01/02, TB-01/02 and TG chassis, the copy stays focused on those stated applications only. In workshop use, this axle set suits routine maintenance, repair after wear, or restoring a compatible chassis to running condition with the specified part format. The 2-piece scope of delivery keeps the contents clear for parts drawers, bench stock and planned service work on supported RC models.  Warning! Not suitable for children under 14 years.

TA-01/02/TB-01/02/TG Wheel Axle Set, RC spare part
TA-01/DF-01 Upright (2), RC spare part, black

Axes & drive shafts

TA-01/DF-01 Upright (2), RC spare part, black

300445572

€8.69

TA-01/DF-01 Upright (2) is a black RC spare part set for compatible TA-01 and DF-01 chassis builds, supplying 2 mirrored uprights on a single molded sprue for direct replacement work. The paired form supports left and right side installation, making it easier to restore the original mounting layout when an existing part is worn, cracked or missing. Each upright is injection-molded and shaped with cylindrical mounting sections, angled arms and reinforcing ribs that support the part where screws or pins pass through the fixing points. The molded geometry is designed for chassis assemblies that rely on precise alignment between connected components, so replacement with the correct upright helps maintain clean mechanical fit. The central sprue keeps both matching pieces together until installation and helps identify the set as one complete replacement pair. This spare part suits workshop use during routine maintenance, rebuilds after running wear, or parts-box preparation for TA-01 and DF-01 platforms. Kept on hand with other service components, the 2-piece set supports faster repairs when suspension or wheel-mount areas need attention.  Warning! Not suitable for children under 14 years.

TA-01/DF-01 Upright (2), RC spare part, black
TA-02 Gear Set, RC spare part, 15-piece drivetrain

Gears & motor pinions

TA-02 Gear Set, RC spare part, 15-piece drivetrain

300050529

€12.99

The TA-02 Gear Set is a dedicated RC spare part set for transmission repair, built around the updated gear layout shown for this drivetrain. Its 15 included pieces support service work on compatible TA-02 based models, with the main revision centered on a one-piece molded spur and drive gear that replaces the earlier separate parts arrangement. This change brings the large spur gear and the smaller drive gear together in a single repair component, so the transmission uses the revised integrated format specified for this set. The package also uses an idler gear in resin instead of the earlier metal version, and the ball retainer specification is G4. These details matter when replacing worn internal drivetrain parts, because the set is designed around that exact update rather than a generic mix of gears. The scope of delivery is 1 gear set with 15 pieces. On the workbench, the set suits planned transmission overhauls as well as targeted replacement of worn gear components after regular RC running. It is intended for compatible TA-02 applications and is not compatible with 1/10 R/C off-road buggies, making the fit context clear before installation begins.  Warning! Not suitable for children under 14 years.

TA-02 Gear Set, RC spare part, 15-piece drivetrain
TA-02/CC-01/FF-01 Front Upright Pair, RC Spare Part

Axes & drive shafts

TA-02/CC-01/FF-01 Front Upright Pair, RC Spare Part

300050705

€7.29

This spare part set is made for TA-02, CC-01 and FF-01 chassis and supplies 2 black front uprights for the steering end of the front axle. The mirrored left and right layout supports a matched fit during repair work and helps restore the intended geometry at the front wheel mounting points. Each upright is moulded with a circular hub opening, fastening holes and a reinforced arm section that connects into the surrounding steering hardware. The ribbed structure adds material where the shape changes direction, while the drilled connection points support accurate screw-based installation with the corresponding chassis parts. As a dedicated replacement part, the set focuses on the front upright area rather than a universal fit across unrelated platforms. The pair suits routine maintenance, rebuilds after wear, or the completion of an older TA-02, CC-01 or FF-01 chassis project. In workshop use, the 2-piece set makes it possible to replace both front sides together and keep the steering assembly consistent across the axle.  Warning! Not suitable for children under 14 years.

TA-02/CC-01/FF-01 Front Upright Pair, RC Spare Part
TA-02/FF-01 Front Upright, spare part, blue

Axes & drive shafts

TA-02/FF-01 Front Upright, spare part, blue

300445246

€8.69

The TA-02/FF-01 Front Upright blue set supplies 2 replacement uprights for compatible front-end assemblies. Each part is formed as a mirrored counterpart, so the left and right sides can be positioned correctly when restoring the steering or suspension layout on a TA-02 or FF-01 chassis. The shape combines a large cylindrical hub section with a smaller upper mounting point and a flat arm with a fastening hole. Reinforcing ribs add structure to the moulded form, and the visible metal insert at the upper mount provides a ready fixing point within the assembly. The blue colour helps separate this pair from other small chassis parts during sorting, servicing and rebuild work. As a dedicated spare part, this set is intended for precise replacement rather than general-purpose adaptation. The 2-piece format suits routine maintenance, repair of worn front components or keeping matching replacements on hand for workshop use. In a build area or pit box, the mirrored pair can be checked against the existing front assembly before fitting, helping keep the chassis layout consistent on both sides.  Warning! Not suitable for children under 14 years.

TA-02/FF-01 Front Upright, spare part, blue
TA-05/TB-03 Drive Shaft, metal spare part, 45 mm

Gears & motor pinions

TA-05/TB-03 Drive Shaft, metal spare part, 45 mm

300051216

€11.99

The TA-05/TB-03 Drive Shaft 45 mm is a metal spare part for compatible Tamiya chassis setups, with 2 matching shafts supplied for drivetrain service on FF-03 chassis, FF-03 PRO chassis, TA05 Ver.II and TA05. The 45 mm length gives a clear fit reference when a build or repair calls for this exact shaft size. Each shaft uses a straight rod form with ball ends and cross pins, a layout designed to connect with the surrounding drivetrain hardware in the intended mounting points. The metal construction and polished finish give the part a clean technical look while keeping the focus on mechanical function inside the chassis. As a dedicated replacement component, it suits maintenance work, parts refreshes and like-for-like swaps where the named platforms require this specific format. In workshop use, the 2-piece set supports planned servicing or the replacement of worn drivetrain hardware on one of the listed chassis types. Kept alongside other RC spares, the clearly stated compatibility and 45 mm dimension make this part easy to identify before installation.  Warning! Not suitable for children under 14 years.

TA-05/TB-03 Drive Shaft, metal spare part, 45 mm
TA-05IFS D-Parts, RC chassis suspension arms

Axes & drive shafts

TA-05IFS D-Parts, RC chassis suspension arms

300051297

€10.99

TA-05IFS D-Parts is an RC chassis spare parts set with 4 molded suspension arms arranged as 2 front and 2 rear pieces. The wishbone-style shape, mounting holes and central attachment points support correct installation on compatible touring car platforms and restore the intended suspension layout after wear or impact damage. The scope of delivery contains 1x D parts tree with 4 parts. These black molded components are intended for replacement and maintenance work rather than universal use, so the value lies in exact fit across the listed chassis families. Compatibility covers FF-03, FF-03 PRO, TA06 MS, TA06, TA06 PRO, TA05 ver.II, TB-Evo.7, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS, TRF419XR, TRF419X, TRF419, TT-02 TYPE-SR and TT-02 TYPE-S. That broad fit list makes the set useful in a spares box for racers and builders maintaining more than one platform. During workshop servicing, replacement arms like these help return free suspension travel and proper linkage alignment on the compatible chassis. They also suit planned rebuilds where fresh running gear parts are fitted before the next track session.  Warning! Not suitable for children under 14 years.

TA-05IFS D-Parts, RC chassis suspension arms
TA-06 Rear Gear Diff. Case Set 52T Spare Part

Gears & motor pinions

TA-06 Rear Gear Diff. Case Set 52T Spare Part

300051462

€4.79

The TA-06 Rear Gear Diff. Case Set 52T is a dedicated spare part for compatible Tamiya chassis, built around a rear bevel gear differential housing layout that supports accurate servicing of the drivetrain. With 7 pieces in the set, it provides the core parts needed for replacing the rear diff case assembly when wear, damage or a rebuild calls for fresh components. This set is specified for TA06, TA06 PRO, TA06 MS, XV-01, XV-01 PRO, XV-01T, M-07 CONCEPT, M-08 CONCEPT and FF-04 EVO chassis. It also fits TD4 and TD2 chassis when used with 54471, which makes the compatibility scope especially useful for hobby benches handling several platforms. The black moulded parts shown for the assembly use multiple fastening points and a separate cover section, supporting a clean mechanical fit around the differential area. On a maintenance bench, the set helps restore a worn rear transmission section with chassis-specific parts instead of improvised substitutes. During a rebuild, the 52T case format and rear mounting design support a focused replacement job for the differential housing section while keeping the chassis setup aligned with the listed applications.  Warning! Not suitable for children under 14 years.

TA-06 Rear Gear Diff. Case Set 52T Spare Part
TA02 D-Parts Suspension Arms, RC spare parts

Axes & drive shafts

TA02 D-Parts Suspension Arms, RC spare parts

310555091

€18.79

TA02 D-Parts Suspension Arms bring core running gear pieces together in one replacement set for RC chassis maintenance. The black molded sprues show mirrored suspension components, linkage-style parts and smaller inserts, giving a clear starting point when worn or broken originals need to be swapped out. The sprue layout keeps related shapes organised before removal, which helps when matching left and right side parts during a repair. Large A-arm style pieces sit alongside long narrow bars with multiple mounting points, plus smaller lever-like forms and circular bush-style elements. This mix supports detailed work on suspension-related areas rather than general cosmetic changes. The molded numbering on the runners also helps identify individual sections during parts preparation and fitment. On the bench, this set suits routine chassis upkeep, restoration of older TA02-based builds and replacement after hard running sessions. It also works as a practical spare to keep in a workshop drawer, ready for rebuilds that call for original-style suspension hardware and linked structural pieces.

TA02 D-Parts Suspension Arms, RC spare parts
TA05 IFS Ver.II Spur Gear, RC spare part, 70T M0.6

Gears & motor pinions

TA05 IFS Ver.II Spur Gear, RC spare part, 70T M0.6

300051215

€6.29

The TA05 IFS Ver.II Spur Gear is a dedicated RC spare part for drivetrain service on selected Tamiya chassis. With 70 teeth and module 0.6, this main gear is built for transmission use where the gear ratio and tooth format must match the existing layout, making it a focused choice for repair or planned parts replacement. The component is supplied as 1 main gear 70T and is shown as a black molded gear with a fine outer tooth ring, a large center hole and multiple evenly spaced inner holes. That geometry matters during maintenance because the mounting pattern and hub area have to align with the drivetrain hardware already in the chassis. Compatibility is stated for TD4 chassis, TD2 chassis, TA08 PRO chassis, TA05 Ver.II chassis and TA05, which keeps selection tied to named platforms rather than broad guesswork. On the bench, this gear suits routine transmission refreshes, rebuilds after wear, or a direct swap when a matching 70T M0.6 part is needed for one of the listed chassis. The single-part scope also keeps the replacement straightforward when an existing drivetrain setup is being restored with the same specification rather than changed to a different ratio.  Warning! Not suitable for children under 14 years.

TA05 IFS Ver.II Spur Gear, RC spare part, 70T M0.6
TA08 06 Module Spur Gear 71T, RC spare gear

Gears & motor pinions

TA08 06 Module Spur Gear 71T, RC spare gear

300051667

€3.69

The TA08 06 Module Spur Gear 71T is a drivetrain spare part for TA08 chassis cars, built to replace a worn gear with the same 06 module format and 71T tooth count. In the transmission, the spur gear works directly with the pinion gear to pass motor power into the driveline, so a fresh gear can restore clean meshing where wear has built up over time. The part shown has a black moulded finish, a large centre hole and multiple circular cut-outs around the hub. Those openings are part of the gear design and sit around the central mounting area while the fine outer teeth carry the load of the gear mesh. Used as routine maintenance, this replacement helps keep the chassis in running condition when the original gear shows visible wear on the teeth. The pack contains 1 TA08 06 Module Spur Gear 71T. It suits workshop upkeep between running sessions, whether the transmission is being refreshed after repeated use or a worn gear is being swapped before the next outing. For TA08 owners who keep spares on hand, this gear covers a core wear point in the drivetrain with the exact compatibility stated for TA08 chassis cars.

TA08 06 Module Spur Gear 71T, RC spare gear
TA08 A Parts Steering Arm Pully RC Spare Set

Axes & drive shafts

TA08 A Parts Steering Arm Pully RC Spare Set

310015144

€14.49

TA08 A Parts Steering Arm Pully 58693 is a replacement parts sprue for RC model maintenance, centred on steering arm and pulley components that restore key chassis functions on the intended TA08 build. The black moulded frame presents the parts in a clearly organised layout, with each piece held in place until needed at the workbench. The runner carries a mix of larger structural shapes and smaller fitting pieces, including arm forms, ring elements and compact mounting details that belong together within the same assembly area. Moulded reference marks with the letter A and numbers 1 through 14 are visible on the sprue, giving a direct visual guide when matching each section to the required build step or service task. This format helps separate similar-looking pieces before cutting and supports a tidier repair process when a worn section needs replacement rather than a full rebuild. On a maintenance bench, the grouped layout makes it easier to prepare the required sections before installation and keep unused pieces together until later service work. For ongoing chassis care, a dedicated replacement frame like this helps return the matching model to proper mechanical condition with the correct part shapes kept in one set.

TA08 A Parts Steering Arm Pully RC Spare Set
TA08 D Parts Suspension Arms for TA08 Chassis

Axes & drive shafts

TA08 D Parts Suspension Arms for TA08 Chassis

300051669

€13.49

TA08 D Parts suspension arms are replacement chassis components for TA08 cars, supplied as 2 parts for maintenance when existing arms are worn. The set focuses on a key suspension area, making it useful for restoring the chassis with matching parts intended for the named platform. The molded parts shown in the set use a mirrored left and right layout, with multiple pivot points and mounting positions formed into each arm. This geometry matters in an RC chassis because the suspension arms connect the wheel assembly to the main structure and guide movement through compression and rebound. Metal-lined pivot holes are visible in the image, adding defined contact points where the parts mount into the suspension system. The black finish keeps the look consistent with typical chassis hardware and makes the parts easy to integrate into an existing TA08 build. These parts suit routine workshop maintenance, rebuilds after heavy running, or a fresh chassis refresh before the next session. In a repair setup, the 2-piece format supports replacing worn arm sections as a matched pair so the suspension layout stays even across the car.

TA08 D Parts Suspension Arms for TA08 Chassis
TA08 Front Belt 132T, RC spare part for chassis

Gears & motor pinions

TA08 Front Belt 132T, RC spare part for chassis

300051670

€12.19

The TA08 Front Belt 132T is a dedicated replacement part for compatible TA08 chassis cars, built to restore the front drivetrain with the specified tooth count and matching belt format. Its black toothed loop is shaped to run around the front transmission pulleys, where it transfers motion through the drivetrain and helps return a worn setup to its intended mechanical operation. As a service part, this belt is focused on fit and function rather than cosmetic change. The 132-tooth layout is the defining specification for this component, making it relevant when an existing belt shows wear through repeated running or maintenance inspection. The thin, flexible construction allows the belt to sit correctly within the chassis transmission path, while the toothed inner profile is made to mesh with the matching pulley system used in the TA08 platform. This replacement suits regular workshop upkeep, planned drivetrain refreshes and repair after belt wear has affected running consistency. Kept as a spare for a TA08 chassis car, it supports faster maintenance decisions when the front drive system needs the correct belt specification rather than a universal substitute.

TA08 Front Belt 132T, RC spare part for chassis
TA08 Rear Belt 101T, chassis spare part

Gears & motor pinions

TA08 Rear Belt 101T, chassis spare part

300051671

€9.19

The TA08 Rear Belt 101T is a dedicated spare part for TA08 chassis cars, built to replace the rear transmission belt when wear starts to affect the drive system. Its toothed inner surface is designed to engage with matching pulleys, creating the mechanical link that carries rotational force through the rear section of the chassis. Used as part of routine maintenance, this replacement belt helps preserve the intended drivetrain function of a TA08 setup. The circular flexible belt format allows it to sit correctly around the pulley path, while the 101T specification identifies the exact rear belt version supplied here. The pack contains 1 rear belt, making it a direct service part rather than a multi-piece upgrade set. Because this is a chassis-specific component, compatibility is stated for TA08 chassis cars. In workshop use, a fresh rear belt is fitted when an existing belt has become worn through repeated running. That makes this part a practical choice for keeping a TA08 car ready for further track sessions, tuning work, and regular upkeep of the transmission system.

TA08 Rear Belt 101T, chassis spare part
TB-03/TT-02SG Spur Gear, RC spare part, 64T

Gears & motor pinions

TB-03/TT-02SG Spur Gear, RC spare part, 64T

300051356

€5.69

The TB-03/TT-02SG Spur Gear 64T M0.6 is an RC spare part built for drivetrain service, replacement and gearing maintenance on compatible chassis. With 64 teeth and module 0.6, it forms the main gear interface that transfers drive through the transmission, making it a concrete choice when an existing setup needs the same specification again. This gear is supplied as 1 main gear and is intended for use with TT-02 chassis, TT-02D chassis, TT-02 TYPE-S chassis and TT-02 TYPE-SR chassis. It can also be used on vehicles equipped with 54500. For TT-02RR chassis, the 64T gear is standard kit equipment, which helps when matching the original drivetrain specification during routine parts replacement. The visible central mounting hole and surrounding fixing points suit its role as a mounted transmission component rather than a general workshop accessory. In workshop use, a like-for-like 64T replacement keeps a compatible chassis aligned with its intended gearing layout after wear or damage. It also suits RC model maintenance benches where specific tooth counts and module sizes matter for keeping transmission parts consistent across different compatible builds.  Warning! Not suitable for children under 14 years.

TB-03/TT-02SG Spur Gear, RC spare part, 64T
TB-04 One-way/Gear Dif. Ring Gear Set 40T

Gears & motor pinions

TB-04 One-way/Gear Dif. Ring Gear Set 40T

300051547

€7.39

The TB-04 One-way/Gear Dif. Ring Gear Set 40T is a drivetrain spare part for selected RC chassis, built around a 40-tooth ring gear and matching bevel components for freewheel or gear differential use. Its dedicated fitment keeps maintenance work focused on the transmission systems named for this set. The set contains 1 bevel gear set with 3 parts. The large ring gear uses a circular form with evenly cut teeth around the outer edge, while the smaller matching gears complete the assembly for the stated drivetrain function. This makes the set suitable for replacing worn internal transmission parts or preparing a compatible chassis for differential or one-way service work. Compatibility is stated for TB-Evo.7 chassis, TB-Evo.6 MS chassis, TB-Evo.6 chassis, TB-05 PRO chassis, TB-04 chassis, TB-04 PRO chassis and TC-01 chassis. In workshop use, the set supports targeted repairs on the named platforms rather than broad universal fitment. The 40T specification gives a clear reference point when matching replacement drivetrain parts during servicing, rebuilds or planned maintenance on compatible RC car chassis.  Warning! Not suitable for children under 14 years.

TB-04 One-way/Gear Dif. Ring Gear Set 40T
TB-05 06 Module Spur Gear 63T, spare gear

Gears & motor pinions

TB-05 06 Module Spur Gear 63T, spare gear

300051609

€3.89

The TB-05 06 Module Spur Gear 63T is the direct spare gear for the TB-05 chassis, built to return the drivetrain to the original kit specification with a 63-tooth layout and 06 module tooth form. As an OEM replacement, it is intended for the same transmission position as the stock part, so the gear train can be restored with the correct meshing profile and ratio. The moulded gear uses fine outer teeth around the full circumference to transfer rotational force through the drivetrain, while the large centre bore locates the part on its mounting point. The inner web includes multiple moulded support sections and cutouts that shape the gear body around the hub area. This is a single replacement component rather than a conversion part, making it suitable when the original spur gear is worn or when the stock specification is needed again. The tooth pitch is optimised for use with common gear ratios, as stated in the product data. In workshop use, this spare gear suits routine drivetrain maintenance on a TB-05 chassis or a rebuild that returns the transmission to the original kit setup. It can also serve as a like-for-like replacement to keep a running chassis aligned with the factory gear specification.  Warning! Not suitable for children under 14 years.

TB-05 06 Module Spur Gear 63T, spare gear
TC-01 C/D-Parts Suspension, chassis spare parts

Axes & drive shafts

TC-01 C/D-Parts Suspension, chassis spare parts

300051663

€12.79

The TC-01 C/D-Parts Suspension set is a dedicated spare parts pack for TC-01 chassis cars, built around 2 C/D parts trees that support accurate maintenance of the suspension system. With molded replacement pieces for key chassis assemblies, it helps restore clean fit and consistent movement where the running gear works hardest. Within the set are suspension arm, knuckle and rocker arm components, grouped as useful service spares for the TC-01 platform. These parts sit in areas that guide wheel movement, support steering articulation and connect suspension elements across the chassis layout. Using model-specific replacement parts keeps mounting points, pivot locations and part geometry aligned with the original TC-01 design. The black molded finish also matches the technical look commonly used across RC chassis assemblies. This set suits workshop maintenance, rebuilds after heavy running sessions, or keeping a spare pack ready for future repairs on a TC-01 car. It can be used when refreshing worn assemblies, replacing damaged pieces after contact, or rebuilding one side with matching counterpart parts from the same set.

TC-01 C/D-Parts Suspension, chassis spare parts
TD4 Universal Shaft Set, RC drivetrain parts

Axes & drive shafts

TD4 Universal Shaft Set, RC drivetrain parts

300022028

€33.99

The TD4 Universal Shaft Set brings a focused drivetrain upgrade or replacement to RC model maintenance, centered on 2 assembled universal shafts and the matching wheel-end hardware. Black-coated metal construction and the articulated joint layout support power transfer where rotating parts need to keep working through steering input and suspension travel. Each shaft is marked 73 and uses a looped eye at one end with a ball end at the other, a mechanical arrangement suited to angled driveline connections rather than a fixed straight link. Alongside the shafts, the set provides 2 axle or outdrive-style components with threaded sections and cross-holes, plus retaining rings, straight pins and 2 short cylindrical couplers. That combination gives the assembly the small locking and joining parts required for a complete drivetrain fitment around the shaft connection points. On the bench, this set suits repair work after wear in the driveline or a planned parts refresh during a chassis rebuild. The compact hardware selection also helps keep RC maintenance organised, with the matching metal pieces grouped for one shaft-related installation rather than drawn from mixed spare parts.

TD4 Universal Shaft Set, RC drivetrain parts
TL-01 G-Parts Gear Set, chassis spare parts

Gears & motor pinions

TL-01 G-Parts Gear Set, chassis spare parts

300050738

€12.29

The TL-01 G-Parts Gear Set is a dedicated spare parts pack for the TL-01 chassis, built around the transmission components used in this platform. With 10 pieces in the set, it provides a focused way to replace worn gearbox parts, refresh a running chassis, or support a rebuild with matching molded elements. The scope of delivery includes 1x G-Parts set with 10 pieces. The visible component group covers several gear forms used in drivetrain layouts, including larger spur-style gears, smaller geared parts and round cover-like elements shaped for gearbox assembly. These molded parts are intended for power transfer inside the chassis transmission, where the gear train routes motor output through meshing teeth and mounted shafts. Using a chassis-specific set helps keep fit and function aligned with the TL-01 layout instead of relying on mixed generic parts. On the bench, this set fits routine service, fault tracing after drivetrain wear, or a planned refresh of an older TL-01 build. It also works well as a workshop spare kept alongside other chassis-specific parts, ready when gearbox maintenance calls for the correct G-Parts group.  Warning! Not suitable for children under 14 years.

TL-01 G-Parts Gear Set, chassis spare parts
TL-01 Upright C-Holder Set, chassis spare parts

Axes & drive shafts

TL-01 Upright C-Holder Set, chassis spare parts

300050736

€10.79

This TL-01 B-Teile Achsschenkel/C-Halter set is a dedicated spare parts pack for the TL-01 chassis, supplying the molded components needed when key mounting points on the running gear need replacement. The scope of delivery includes 1x B parts group with 21 pieces, arranged as a matched set for chassis service and rebuild work. The molded black components include upright and C-holder forms together with related small fittings from the same parts section, so the replacement pieces come from one coordinated runner group. Image details show mirrored left and right parts, circular bearing housings, pivot points, hex-shaped hub-style pieces and marked small levers, all indicating precise placement within the chassis assembly. This makes the set useful for restoring worn or damaged areas while keeping the fit consistent with the original TL-01 layout. On the workbench, the set supports routine maintenance, targeted repairs after running sessions or the refresh of an older chassis build. Kept as workshop stock, these chassis-specific parts help avoid mixing incompatible components and make it easier to return a TL-01 model to proper mechanical condition.  Warning! Not suitable for children under 14 years.

TL-01 Upright C-Holder Set, chassis spare parts
TL01 Stainless Steel Suspension Shaft Set

Axes & drive shafts

TL01 Stainless Steel Suspension Shaft Set

300053301

€9.59

The TL01 Stainless Steel Suspension Shaft Set is a hop-up hardware set for TL01 chassis models, built around 8 grooved stainless steel shafts and 16 matching 2 mm E-rings. The shaft layout follows the replacement guide shown for the chassis, with 4 shafts at 3 x 48.5 mm and 4 at 3 x 37 mm, giving the suspension mounting points the specified metal parts for service or upgrade work. The grooved shaft ends are designed to accept the included E-rings, which snap into place to retain each shaft after installation through the relevant suspension points. The guide identifies these shafts as replacements for 3 x 46 mm and 3 x 32 mm screw pins, changing the fixing method from threaded pins to retained shafts with clips. That layout is useful when refreshing a used chassis, replacing missing hardware or preparing a TL01 build with the correct hop-up parts. The set focuses on the pivot hardware itself rather than cosmetic changes, making it a functional addition for maintenance benches and parts boxes. During assembly or repair, the two shaft lengths help match the correct front or rear mounting positions shown in the fitting diagram. The compact metal parts format also makes the set easy to store alongside other chassis spares for routine rebuilds and running upkeep.

TL01 Stainless Steel Suspension Shaft Set
TRF 44 mm Swing Shafts, RC spare part, 2-piece

Axes & drive shafts

TRF 44 mm Swing Shafts, RC spare part, 2-piece

300022103

€18.99

This 2-piece set of TRF 44 mm lightweight half cardan shafts is built for on-road RC chassis that use a compact, efficient driveline layout. The 44 mm length gives a defined fit for supported platforms, while the lightweight shaft design supports responsive rotation through the transmission under racing loads. Each shaft is intended for use with ball bearings, where the reduced friction helps limit speed loss in corners and keeps the driveline running with less drag. The set is suited to maintenance as well as targeted tuning, especially when a chassis needs fresh driveline parts after repeated track sessions. Supported compatibility includes the TRF420, TA08PRO, TRF420X and TA08R chassis. For the TRF421 chassis, use with ball bearing set 51762 and differential joints 51764 is specified when fitted to chassis 42384. In workshop use, this set fits naturally into a rebuild focused on transmission efficiency and consistent corner exit response. It also serves as a practical spare for race-day parts boxes, where exact length, defined chassis fit and low-friction operation matter more than generic universal hardware.

New
TRF 44 mm Swing Shafts, RC spare part, 2-piece
TRF 46 mm Drive Shafts, RC accessory, double cardan

Axes & drive shafts

TRF 46 mm Drive Shafts, RC accessory, double cardan

300051761

€23.49

The TRF 46 mm aluminium drive shafts are a dedicated RC accessory for double cardan shaft systems on the TRF421 and TRF421X chassis. Supplied as 2 shafts, they support a driveline layout that works with ball bearings to keep rotation efficient through fast direction changes and technical corner sections. Their role sits at the centre of the transmission path, where reduced friction can help preserve drive feel when the chassis is loaded in turns. The 46 mm length matches the stated application, and the aluminium construction gives this set a focused mechanical specification for competition-oriented maintenance. When fitted on the TRF421 chassis, the setup is used with item 51762 for universal shaft ball bearings, item 51763 for TRF421X front direct joint bearings, and item 51764 for differential joints. This set suits bench servicing, race-day spares planning, and targeted drivetrain refreshes on compatible chassis. In a workshop setup or between heats, the shafts slot into a parts selection built around TRF421 and TRF421X running gear, keeping the transmission system aligned with the intended double cardan configuration.

New
TRF 46 mm Drive Shafts, RC accessory, double cardan
TRF Drive Shaft 42mm W Cardan, RC spare part

Axes & drive shafts

TRF Drive Shaft 42mm W Cardan, RC spare part

300042239

€20.99

The TRF Drive Shaft 42mm W Cardan is a drivetrain upgrade part shaped for front-end use on Tamiya touring cars, where the Double Cardan layout helps cut rotational vibration and gives the steering a cleaner, more settled feel through direction changes. Each shaft uses 2 joint sections, a configuration aimed at smoother power transfer in a part of the chassis where precision is easy to notice. This set contains 2 shafts and is based on the 44 mm Double Cardan Joint Shaft from Item 42216, but with each shaft shortened by 2 mm. That change brings the overall length in line with a standard 42 mm universal drive shaft while leaving more room for suspension setup changes. The result is a tuning part that supports finer adjustment of front suspension geometry without moving away from the familiar 42 mm fit. The dark mechanical finish and compact joint housings match the technical look of competition-focused RC running gear. Installed on the front end of a touring car chassis, these shafts suit builds where steering response, corner entry feel and setup flexibility matter during track tuning. They also work well as replacement drivetrain parts when a front assembly is being refreshed with matching left and right components.

TRF Drive Shaft 42mm W Cardan, RC spare part
TRF420 Alu. F Direct Cups, spare parts, aluminum

Gears & motor pinions

TRF420 Alu. F Direct Cups, spare parts, aluminum

300051647

€19.29

The TRF420 Alu. F Direct Cups set is a focused spare parts release for the front drivetrain of the TRF420 chassis. With 2 aluminum front direct cups and 1 swing shaft cap parts set in the pack, it provides the named replacement parts needed when wear begins to affect the front drive section and running efficiency starts to drop. The direct cups are made from lightweight aluminum and finished with a hard coating. That combination gives the parts a low-mass construction at a point in the drivetrain where repeated contact matters, while the coated surface is specified to support durability during regular use. The shape is designed for the TRF420 chassis, so the set suits planned maintenance as well as like-for-like replacement during a rebuild of the front end. Compatibility also extends to cars using the TRF420 Front Direct Pulley 37T, which broadens fitment within TRF420-based setups. On the bench, this set fits naturally into routine drivetrain servicing, especially when worn cups begin to influence how cleanly the front section transfers drive. It also makes sense as a workshop spare for race-day maintenance, where having the correct front-end hardware ready can shorten downtime between running sessions.

TRF420 Alu. F Direct Cups, spare parts, aluminum
TRF420 C-Parts Front Uprights, chassis spare part

Axes & drive shafts

TRF420 C-Parts Front Uprights, chassis spare part

300051638

€6.39

TRF420 C Parts Front Uprights bring the specified spare steering components back to the front end of a compatible touring car chassis. The set is intended as a replacement for the TRF420 race car chassis and uses a 2-part upright layout that divides the arm and bearing housing into separate pieces, giving the assembly the structure required by this design. That 2-piece construction is the key technical detail here: the arm and bearing housing are molded as distinct components rather than a single combined part. This layout matches the newer TRF420 front upright design and can also be used on existing touring car racing platforms named in the compatibility data. The parts are molded in carbon fiber-reinforced material, a specification chosen here for higher rigidity in this steering area. The set contains 1 TRF420 C Parts pack. Compatibility covers TRF420, TRF419, TA07 and TB-05 PRO chassis cars, which makes this spare set useful both for direct replacement and for updating supported front-end configurations on other listed platforms. In a workshop setup, these uprights fit naturally into maintenance, rebuild or race-prep routines where worn steering hardware needs to be exchanged for the correct designated parts.

TRF420 C-Parts Front Uprights, chassis spare part
TRF420 E-Parts Rear Uprights, RC spare parts

Axes & drive shafts

TRF420 E-Parts Rear Uprights, RC spare parts

300051640

€7.59

TRF420 E-Parts Rear Uprights are replacement suspension components for the TRF420 racing car chassis, made to return the rear end to its intended mounting layout. The carbon fiber-reinforced resin construction focuses on rigidity, so the upright keeps its shape where the shaft and bearing seats need stable support during running. Each set contains 1 TRF420 E Parts sprue, supplying the rear upright pieces shown for this chassis family. The bearing positions are precisely aligned, a detail that matters at the rear hub area where smooth rotation and efficient transfer depend on accurate seating. These parts are designed for use with 3 mm diameter shafts, and they work with cars using Item 51639 TRF420 D Parts suspension arms. That combination makes them a direct maintenance choice when worn or damaged rear suspension hardware needs to be replaced with the correct matching parts. On a workshop bench, these uprights fit into a focused chassis refresh where the rear suspension is being rebuilt around the original TRF420 geometry. They also suit race-day spares storage, where keeping the right molded parts on hand helps return the car to running condition with the intended component match.

TRF420 E-Parts Rear Uprights, RC spare parts
TRF420/419 Gear Diff Bevel Set, model spare parts

Gears & motor pinions

TRF420/419 Gear Diff Bevel Set, model spare parts

300051567

€5.89

The TRF420/419 Gear Diff Bevel Set is a drivetrain spare-parts set for selected Tamiya chassis, built around redesigned bevel gears for the newer TRF419 gear differential unit. As replacement internal parts, these gears support accurate restoration of the differential mechanism when the original bevel gears show wear through repeated running and maintenance cycles. The set is described for the TRF419 gear differential unit and also appears in the designation for TRF421X, TRF420 and TA08, making it relevant for several closely related platforms. The redesigned gear shape is specified for the newer differential unit with large oil capacity, a detail that matters when matching internal parts to the correct generation of assembly. The pack contains 2 Gear Differential Unit Bevel Sets in the GV parts category, providing a clear service quantity for workshop stock or scheduled rebuilds. This kind of spare part fits naturally into bench maintenance between race meetings, setup revisions or routine transmission overhauls. Kept alongside other drivetrain consumables, the bevel sets help return a compatible gear differential to its intended internal configuration with the correct replacement parts on hand.  Warning! Not suitable for children under 14 years.

TRF420/419 Gear Diff Bevel Set, model spare parts
TRF420/419/418 Cross Joint, spare parts set

Axes & drive shafts

TRF420/419/418 Cross Joint, spare parts set

300051444

€4.19

The TRF420/419/418 Cross Joint is a spare parts set for a broad range of Tamiya chassis platforms, bringing together the small connector hardware needed for targeted maintenance and replacement work. In the set are 6 pieces, shown as black cylindrical connector parts, silver metal pins and split rings, giving a clear mechanical match for compact linkage or joint assemblies within the stated fitment range. Compatibility extends across TD4 chassis, TD2 chassis, M-08 CONCEPT chassis, M-07 CONCEPT chassis, TA08 PRO chassis, TA07 MSX chassis, TA07 MS chassis, TA07 PRO chassis, TA06 PRO chassis, TB-Evo.7 chassis, TB-Evo.6 MS chassis, TB-Evo.6 chassis, TB-05 PRO chassis, TRF420X chassis, TRF420 chassis, TRF419XR chassis, TRF419X chassis, TRF419 chassis, XV-02PRO chassis and XV-01 PRO chassis. For TD4 chassis and TD2 chassis, the set is used with 22028. That specific pairing helps when checking fit before a rebuild or when keeping matching service parts ready for repeated chassis upkeep. The small-format parts suit bench work where worn connectors, pins or retaining pieces need a direct replacement instead of a full assembly change. Laid out as separate hardware components, the set supports precise servicing on compatible racing and off-road platforms where correct fit matters during ongoing maintenance.  Warning! Not suitable for children under 14 years.

TRF420/419/418 Cross Joint, spare parts set
TRF420/419/TA-07 Gasket (4), spare part set

Gears & motor pinions

TRF420/419/TA-07 Gasket (4), spare part set

300051648

€5.59

The TRF420/419/TA-07 Gasket set brings the shared gear differential seal used in the TRF420, TRF419 and TA07 into the Tamiya spare parts range as a dedicated 4-piece replacement pack. Each gasket is a flat ring with a profiled center cutout and 4 mounting holes, shaped to sit within the differential assembly where accurate positioning matters during service work. Replacing worn gaskets at the right time helps keep the differential unit properly sealed and ready for continued use. The 4 included pieces provide matching replacements for maintenance sessions, rebuilds or parts-box stock, especially on chassis that use the common gear differential design named in the compatibility list. The brown fibre-style gasket material shown in the set is suited to its role as a sealing layer between mechanical parts, while the identical cut pattern across all 4 pieces supports consistent fitment. In workshop use, these gaskets suit routine diff overhauls on compatible touring chassis, whether the goal is refreshing a frequently run car or preparing spare seals before the next rebuild. Kept alongside other service parts, the set gives TRF420, TRF419 and TA07 owners the exact gasket type specified for these gear differential units.

TRF420/419/TA-07 Gasket (4), spare part set
TRF420/TA-07 Direct Pulley (37T), RC spare part

Axes & drive shafts

TRF420/TA-07 Direct Pulley (37T), RC spare part

300051642

€13.29

The TRF420/TA-07 Direct Pulley (37T) is a dedicated RC spare part for front drivetrain service on compatible chassis cars. Its integrated front direct pulley and holder form 1 molded assembly, trimming 2 g compared with the separate-part layout used on earlier TRF chassis and keeping the rotating section lighter. Included 0.2 mm and 0.3 mm shims allow pulley position and clearance adjustment during installation, which is especially useful when the part is fitted on chassis other than TRF420. The pulley flange pushes into the pulley with a snap-fit connection, creating a compact assembly around the central hub opening. Direct cups are mounted with screws rather than the 2 x 9.8 mm pins used on the previous chassis generation, so cup replacement can be handled separately from the pulley itself. The set contains 1 TRF420 front direct pulley and 4 shim washers, with 2 pieces in each shim thickness. In workshop use, this part suits routine drivetrain refreshes after wear or damage, and it also supports careful fitment tuning where clearance needs fine adjustment. Compatibility covers TRF420 and TA-07 chassis cars, while TRF419 fitment requires separately sold front direct cups.

TRF420/TA-07 Direct Pulley (37T), RC spare part
TRF421 A Parts Upper Arms, model spare parts

Axes & drive shafts

TRF421 A Parts Upper Arms, model spare parts

300051739

€7.99

TRF421 A Parts Upper Arms are model spare parts made for the TRF421 platform, supplying the designated upper arm components for suspension maintenance and chassis rebuild work. The set focuses on one exact assembly group, which makes it easier to replace worn or damaged pieces while keeping the build aligned with the original parts layout. As A Parts, these components belong to a defined section of the TRF421 parts structure rather than a general hardware mix. That clear designation helps when sorting workshop stock, planning a rebuild, or selecting the correct replacement set after track use. Upper arms play a central role in the suspension layout by linking key mounting points and supporting the geometry that guides wheel movement through the chassis travel. Using the correct replacement group helps preserve the intended fit within that section of the model. This set suits bench maintenance, race preparation and post-run servicing when the chassis is stripped for inspection. It also fits well into a spares collection kept ready for fast turnaround between practice sessions, rebuilds and ongoing setup work on the TRF421.  Warning! Not suitable for children under 14 years.

TRF421 A Parts Upper Arms, model spare parts
TRF421 Axle Shafts, RC spare part, double cardan

Axes & drive shafts

TRF421 Axle Shafts, RC spare part, double cardan

300042388

€15.79

These TRF421 axle shafts are a dedicated RC spare part for double cardan joint shafts and are supplied as a 2-piece set for the TRF421 chassis kit. The pair gives the drivetrain matching replacement components where a rebuild, maintenance cycle or worn shaft calls for the original fit. Each shaft combines a silver cylindrical section with black joint ends, and the visible cross-hole and threaded end show the mechanical connection points used in the assembly. The double cardan layout is designed for articulated drivetrain movement, so the shaft can work through the steering and suspension motion built into the chassis. As a chassis-specific spare part, the set is aimed at accurate fitment rather than universal use, which keeps parts selection clear during workshop preparation. On a bench setup, the 2 matching shafts suit routine service work on the TRF421 platform and help keep left and right replacement parts consistent within the same drivetrain area. For racers maintaining a competition chassis between runs, this set supports quick parts planning by focusing on one exact component group for the TRF421 kit.  Warning! Not suitable for children under 14 years.

TRF421 Axle Shafts, RC spare part, double cardan
TRF421 C Parts Uprights, RC spare part

Axes & drive shafts

TRF421 C Parts Uprights, RC spare part

300051741

€6.49

TRF421 C Parts Uprights provide a direct replacement set for the TRF421 chassis, focusing on the suspension area where accurate part geometry matters during maintenance. The black moulded parts are shaped as dedicated uprights, with the mounting structure needed to restore the original layout when existing components are worn, damaged or missing. Their compact technical form suits bench work that calls for the correct chassis-specific fit rather than a universal workaround. The moulded construction supports clean alignment with the surrounding hardware, and the C parts designation helps identify the set quickly within a larger spares collection. For regular RC maintenance, keeping model-specific replacement parts on hand can shorten downtime after contact on track or wear from repeated running sessions. These uprights fit naturally into workshop routines such as scheduled servicing, partial rebuilds and pre-race checks on the TRF421 platform. They also make a practical addition to a pit box or home parts organiser, where clearly identified replacement sets help keep repairs focused on the exact section of the chassis that needs attention.  Warning! Not suitable for children under 14 years.

TRF421 C Parts Uprights, RC spare part
TRF421 D Parts, suspension arms for RC models

Axes & drive shafts

TRF421 D Parts, suspension arms for RC models

300051742

€8.99

TRF421 D Parts suspension arms are replacement components for a compatible RC model chassis, supplying the left and right arm shapes needed where suspension geometry and mounting accuracy matter. The pair is shown in black molded material with a mirrored layout, so each side follows the intended orientation within the assembly. Each arm uses a lightweight truss pattern with large triangular openings, molded reinforcement ribs and smooth curved edges. That structure concentrates material around the load-bearing sections and the connection areas rather than filling the whole shape solid. Several circular mounting holes are formed directly into each piece, and the visible bushing-style inserts mark the points where compatible hardware is fitted. Hexagonal recess details and molded reference marks add further visual cues when sorting parts during maintenance. These components suit rebuilds, wear replacement or a fresh chassis assembly where the original arm set needs to be renewed. In a workshop setup, the mirrored pair can be matched side by side before installation, helping keep the suspension layout organized and the mounting sequence clear on a compatible TRF421 platform.  Warning! Not suitable for children under 14 years.

TRF421 D Parts, suspension arms for RC models
TRF421 Drive Belt, replacement part, 116T

Gears & motor pinions

TRF421 Drive Belt, replacement part, 116T

300051746

€10.19

The TRF421 Drive Belt 116T is a dedicated replacement part for the drivetrain of the matching TRF421 chassis. Its closed-loop form and evenly spaced inner teeth are made to run around the corresponding pulley path, creating the mechanical link that carries rotation through the transmission during RC use. The 116T specification identifies the belt size for the intended setup and helps maintain the original drive ratio and belt path of the chassis. The black belt material is flexible enough to route through the drivetrain layout while the toothed inner surface is shaped for positive engagement with matching gears or pulleys. This makes the part relevant during routine maintenance, a full rebuild, or the replacement of a worn belt after repeated running sessions. As a single drivetrain component, it is best chosen by the exact designation rather than by appearance alone. In workshop use, the belt fits naturally into service tasks where the transmission is being refreshed or restored to its stated specification. On a race chassis, a correctly matched drive belt helps keep the power system operating through the intended pulley sequence, so the rest of the drivetrain can work as designed.  Warning! Not suitable for children under 14 years.

TRF421 Drive Belt, replacement part, 116T
TRF421 Fr. Direct Pulley 37T, RC spare part

Gears & motor pinions

TRF421 Fr. Direct Pulley 37T, RC spare part

300051744

€11.19

The TRF421 Fr. Direct Pulley 37T is a dedicated RC spare part for drivetrain service on compatible model setups. Its circular pulley form, central hub and evenly spaced outer teeth are built for direct engagement with a toothed belt, so rotational motion can be transferred through the front drive section with the specified 37T configuration. The black component uses a perforated inner disc with multiple round cutouts, a detail that removes material from the rotating section while keeping the outer toothed ring and hub structure intact. The raised hub section provides the mounting point, and the toothed circumference guides the belt along a defined path instead of relying on friction contact. This makes the part relevant wherever a worn pulley, damaged teeth or drivetrain refresh calls for a like-for-like replacement. The studio image also shows a ring-shaped companion part with an inner groove, indicating a matching hardware element within the spare-part set. In workshop use, the pulley suits routine maintenance, rebuilds and parts replacement after extended running sessions. It fits naturally into a spares box for racers and tuners who keep belt-drive assemblies working with the correct front transmission hardware.  Warning! Not suitable for children under 14 years.

TRF421 Fr. Direct Pulley 37T, RC spare part
TRF421 Gear Diff Set, RC differential parts set

Gears & motor pinions

TRF421 Gear Diff Set, RC differential parts set

300051745

€39.99

The TRF421 Gear Diff Set brings the core parts of a gear differential into one RC maintenance and assembly pack, with a 37T differential case, bevel gears, cross pieces and metal outdrive cups arranged for a focused driveline rebuild. The included oil, gasket plate and sealing parts support the internal mechanism where the gears rotate inside the closed housing. Inside the set are 2 black housing halves, 2 large silver bevel gears, 4 smaller bevel gears, 2 white cross-shaped internal parts, 2 metal shafts or pins, 2 small straight pins, 2 ring bearings, blue O-rings, washers, shims, spacer discs, clips and screws. These parts work together through a clear mechanical sequence: the bevel gears sit inside the case on the cross pieces, the outdrive cups connect at each side, and the housing closes around the assembly with the gasket and screws. The bearings support the rotating sections, while shims and spacers help position the moving parts within the differential body. This set suits workshop use, scheduled maintenance and replacement of worn differential internals on a TRF421 build. On the bench, the laid-out parts make it easy to sort the assembly stages, check each sealing and spacing component, and rebuild the differential with the required hardware close at hand.  Warning! Not suitable for children under 14 years.

TRF421 Gear Diff Set, RC differential parts set
TRF421 Wheel Axles, chassis accessory, 2 pcs

Axes & drive shafts

TRF421 Wheel Axles, chassis accessory, 2 pcs

300042386

€13.79

The TRF421 Wheel Axles set supplies 2 matching axle parts for the TRF421 chassis kit, giving maintenance builds and replacement work the exact component type named for that platform. Each axle uses a grub screw attachment, a fastening method that fits the specified chassis layout and keeps the connection method consistent with the intended hardware. The parts shown here have a machined metal construction with a forked end, a smooth cylindrical shaft, a transverse hole and a threaded tip. That geometry matters during assembly because it defines how the axle seats, aligns and connects at its mounting point. As a 2-piece pack, the set covers a paired replacement rather than a mixed assortment of hardware. The note on fit is equally specific: these axles are not compatible with clip type shafts, so the connection standard is clearly separated before installation starts. This set suits workshop stock for the TRF421 chassis kit, whether the goal is a direct replacement, a rebuild after wear, or keeping matching spare drivetrain parts ready between running sessions. The focused pack format also makes it easy to keep the correct axle type on hand for planned service work on the same chassis.  Warning! Not suitable for children under 14 years.

TRF421 Wheel Axles, chassis accessory, 2 pcs
TRF421/420/419 Spur Gear 116T M0.4, spare part

Gears & motor pinions

TRF421/420/419 Spur Gear 116T M0.4, spare part

300051557

€4.49

The TRF421/420/419 Spur Gear 116T M0.4 is a dedicated spare part for compatible Tamiya racing chassis, built around a 116-tooth layout and module 0.4 specification. That combination makes it a direct drivetrain replacement when the original gear shows wear, helping restore the intended transmission setup for continued running and regular workshop service. Its role sits at the center of the drivetrain, where tooth count and module need to match the chassis design exactly. The pack contains 1 spur gear, so maintenance can stay focused on the specific part that needs replacement rather than a larger mixed set. The source data also names compatibility with the TRF418 chassis in the long text, while the short designation states TRF421/420/419; this copy therefore follows the current product designation without extending fitment beyond the provided naming. As a model accessory in the Models Supplies category, it suits bench stock for rebuilds, wear replacement and planned servicing. During routine maintenance, a fresh spur gear can be fitted when drivetrain wear becomes visible or when a rebuild calls for the stated 116T M0.4 specification. Kept in a parts case or workshop drawer, it gives compatible chassis a like-for-like replacement ready for the next service interval.  Warning! Not suitable for children under 14 years.

TRF421/420/419 Spur Gear 116T M0.4, spare part
TRF421/X Diff. Case Parts Bag (37T), spare part

Gears & motor pinions

TRF421/X Diff. Case Parts Bag (37T), spare part

319007664

€7.79

TRF421/X Diff. Case Parts Bag (37T) is a model supplies spare part created for differential-related service work. The designation identifies the component group directly, making it easier to match a replacement to the correct area of a compatible build when worn or missing parts need to be exchanged. The 37T marking provides a concrete specification within the part name, which helps separate this bag from other drivetrain or case components in a workshop stock. As a dedicated replacement rather than a general accessory, it suits planned maintenance, rebuilds and the careful upkeep of running gear assemblies. The bag format also keeps the included parts grouped together instead of loose in a parts box, which supports clearer storage and faster identification during repair sessions. On the bench, this spare part fits naturally into routine model servicing, whether a differential is being refreshed after use or a stored chassis is being brought back into running condition. It also works as a practical reserve component for builders who keep key drivetrain spares ready between race-day checks and workshop maintenance.  Warning! Not suitable for children under 14 years.

TRF421/X Diff. Case Parts Bag (37T), spare part
TRF421/X Shaft 1.6x9mm, model spare part

Axes & drive shafts

TRF421/X Shaft 1.6x9mm, model spare part

319803336

€6.19

The TRF421/X Shaft 1.6x9mm is a dedicated model spare part for double cardan assemblies, built around a clearly stated 1.6 x 9 mm shaft size and supplied in a pack of 5. That combination gives maintenance benches and race boxes a direct replacement option when a matching driveline pin is needed, without relying on broad, unspecific hardware choices. Its role is straightforward: this shaft belongs in a double cardan setup, where the correct diameter and length matter for fit within the joint assembly. The 5-piece pack supports repeated servicing across more than one maintenance session and helps keep identical replacements on hand for rebuilds. Because the data identifies this part specifically as a shaft rather than a general accessory, the search value sits in the exact designation and measurement, which makes it easier to match against an existing TRF421/X parts list or a worn component removed during service. On the workbench, this kind of spare suits routine drivetrain upkeep, parts-box organisation and targeted replacement before the next running session. In a workshop stock drawer or trackside tool case, the compact 5-pack keeps the required size ready when a double cardan assembly calls for the same 1.6 x 9 mm specification.  Warning! Not suitable for children under 14 years.

TRF421/X Shaft 1.6x9mm, model spare part
TRF421/X Spur Gear Nut Blue, model accessory

Gears & motor pinions

TRF421/X Spur Gear Nut Blue, model accessory

313451527

€7.29

The TRF421/X Spur Gear Nut Blue is a dedicated model accessory for the drivetrain area, supplying a specific replacement part for compatible RC builds and maintenance work. Its blue finish gives this small fastening component a clear visual identity on the bench, where quick part recognition matters during rebuilds and servicing. Used at the spur gear mounting point, the nut supports accurate replacement when an original part is worn, misplaced or being swapped during routine upkeep. The compact format makes it easy to sort into organiser trays, hardware boxes or spare-parts drawers alongside other workshop essentials. Because the data identifies this part by its exact TRF421/X designation, it also helps keep parts selection focused on the intended application instead of relying on generic hardware. On a home workbench, in a club pit area or during pre-run checks, a dedicated spare like this keeps drivetrain maintenance moving with less interruption. It fits naturally into regular service routines where small fastening parts are checked, replaced and kept ready for the next rebuild.  Warning! Not suitable for children under 14 years.

TRF421/X Spur Gear Nut Blue, model accessory
TRF421X Front Direct Cup, RC spare part set

Axes & drive shafts

TRF421X Front Direct Cup, RC spare part set

300051763

€20.29

The TRF421X Front Direct Cup set is a dedicated RC spare part pack for focused maintenance on the TRF421X platform. With 2 matching front direct cups in one set, it provides the exact replacement format for this specific drivetrain area when worn parts need to be exchanged. As a model supply rather than a full kit, this set is built around precise replacement work. The direct cup design serves the front section named in the part title, which helps keep servicing accurate and avoids replacing unrelated assemblies. The pack format of 2 matching pieces suits symmetrical front-end maintenance and gives a clear fit for rebuild planning, workshop stock or routine parts rotation. Where a drivetrain component has taken wear through repeated running, a dedicated replacement like this keeps the repair centered on the affected section. On the bench, the set fits naturally into regular RC maintenance schedules, from checking drivetrain wear during a rebuild to preparing spares before track use. It also suits hobby storage systems where model-specific replacement parts are kept ready for fast servicing between running sessions.  Warning! Not suitable for children under 14 years.

TRF421X Front Direct Cup, RC spare part set
TRF421X Gear Diff Set, model accessory set

Axes & drive shafts

TRF421X Gear Diff Set, model accessory set

300051767

€39.99

The TRF421X Gear Diff Set is a model accessory set centered on drivetrain service for compatible hobby builds. Its designation points directly to the differential area, making it a clear choice when a workshop setup calls for a dedicated gear diff replacement or a matching spare kept ready beside the chassis. Within the Models & Accessories range and listed under Models Supplies, this set belongs to the maintenance side of model building rather than the finished vehicle itself. That makes it useful for planned rebuilds, parts sorting, and repair work where the differential assembly needs the correct set under a single name. The wording Gear Diff Set also gives a concrete search anchor for hobbyists looking specifically for differential-related spares instead of general accessories. Batteries are not included. On the bench, the set fits naturally into routine drivetrain work such as refreshing a used build, preparing parts before a rebuild, or keeping a compatible spare ready between track sessions. For collectors and active builders alike, the clear TRF421X designation helps separate this set from broader workshop stock and keeps parts selection focused on the intended assembly area.  Warning! Not suitable for children under 14 years.

TRF421X Gear Diff Set, model accessory set
TRF421X GearDiff Joints BB, model accessory

Axes & drive shafts

TRF421X GearDiff Joints BB, model accessory

300051764

€17.29

TRF421X GearDiff Joints BB is a dedicated model accessory for drivetrain-related maintenance and replacement work. The exact designation points to a specific component set within the TRF421X parts range, making it a focused choice when a compatible build needs the matching GearDiff Joints BB part. This accessory is supplied as a separate component rather than a general-purpose workshop consumable, which matters when service work depends on the correct fit within an existing assembly. The naming indicates use around the gear differential area, so it belongs in repair planning, rebuild preparation, or routine parts replacement where drivetrain wear has to be addressed with the proper matching piece. Because the provided data identifies the part by its exact designation, the clearest buying cue is precise part matching rather than broad category claims. On the bench, this kind of replacement part supports scheduled maintenance, targeted repairs after wear, or preparation of spare components for future service intervals. The compact format also makes it practical to keep alongside other model spares, so a compatible drivetrain can be returned to running condition with the correct designated part when needed.  Warning! Not suitable for children under 14 years.

TRF421X GearDiff Joints BB, model accessory
TT-01 A-Parts Steering Arm Upright Spare Set

Axes & drive shafts

TT-01 A-Parts Steering Arm Upright Spare Set

300051002

€15.49

The TT-01 A-Parts Steering Arm Upright spare set is made for the TT-01 TYPE-E chassis and brings key front-end components together in one molded parts group. Steering arm and upright sections are central to wheel guidance and mounting geometry, so a matching replacement set helps keep a build aligned with the original chassis layout during repair or maintenance. The scope of delivery contains 1x A-Parts with 26 pieces. Keeping the components on a single runner supports clear identification before removal and helps separate mirrored left and right shapes during assembly. The black molded parts format suits workshop use where individual sections may need to be replaced after wear, damage or a rebuild. Because this set is tied specifically to the TT-01 TYPE-E platform, it serves as a direct chassis component group rather than a universal assortment for unrelated RC models. On the bench, the set fits naturally into maintenance sessions that focus on steering hardware, upright mounting points and surrounding front suspension connections. It also supports planned refresh work on an existing TT-01 TYPE-E build when original molded sections need to be exchanged with matching replacement parts.  Warning! Not suitable for children under 14 years.

TT-01 A-Parts Steering Arm Upright Spare Set
TT-01/DF-02 Ball Differential Set, RC drivetrain part

Gears & motor pinions

TT-01/DF-02 Ball Differential Set, RC drivetrain part

300053663

€64.49

The TT-01/DF-02 Ball Differential Set is an RC drivetrain upgrade designed to add a limited slip differential effect to compatible chassis. When 1 driven wheel loses contact with the surface, the ball differential helps maintain drive instead of letting power fade away, which supports steadier acceleration on mixed grip sections and uneven ground. This is an assembly-type differential set, and the included gearbox joints form part of the build. The mechanism is adjusted by tightening the 2x10 mm cap screw until the ring gear does not slip, then backing off within an adjustment range of up to 1 turn from the fully tightened position. During adjustment, the 2x5 mm cap screw is removed and then tightened again to prevent loosening. The instruction material also identifies parts such as disk springs, a ball thrust bearing, an 850 metal bearing, a screw bushing and a pressure plate cap, showing the internal layout of the unit and how the rotating parts are aligned. Fitment covers TT-02, TT-02 Type-S, TT-02D, TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E, DF-02 and TT-02B chassis. For TT-02 Type-S, use with Item 53806 TT-01 Ball Differential Cup Joint for Universal Shaft. For TT-02B, MB16 6 mm O-rings are used in different positions depending on front or rear installation.

TT-01/DF-02 Ball Differential Set, RC drivetrain part
TT-01/E/R Drive Shaft Set, chassis spare parts

Axes & drive shafts

TT-01/E/R Drive Shaft Set, chassis spare parts

300051006

€13.49

The TT-01/E/R Drive Shaft Set brings the core running gear back into service with 2 wheel axles and drive shaft parts made for TT-01D TYPE-E and TT-01 TYPE-E chassis. Black moulded sections and metal shafts combine the shapes needed for axle mounting, driven connections and secure fastening points, so the compatible chassis can return to smooth mechanical operation. This spare-parts set is aimed at the drivetrain area where rotation, power transfer and wheel fit all depend on correctly matched components. The included parts are supplied as 2 wheel axles and are intended for replacement rather than visual customising, which makes them useful when existing axle parts show wear, damage or loss. Threaded shaft ends support wheel attachment, while the formed housings and square drive ends match the technical layout shown for this set. As a dedicated chassis component, the set fits into regular maintenance work, rebuilds and repair sessions on compatible TT-01 variants. On the bench, the parts suit planned servicing as well as targeted fixes after heavy running. In a workshop setup for RC maintenance, the set helps restore the mechanical link between drivetrain and wheel assembly on the specified chassis types.  Warning! Not suitable for children under 14 years.

TT-01/E/R Drive Shaft Set, chassis spare parts
TT-01/E/R G-Parts Gear Set, drivetrain spare parts

Gears & motor pinions

TT-01/E/R G-Parts Gear Set, drivetrain spare parts

300051004

€10.29

The TT-01/E/R G-Parts Gear Set is a drivetrain spare-parts set for the TT-01D TYPE-E and TT-01 TYPE-E chassis. With 8 included E/R/G parts, it provides a direct replacement option for gearbox-related components when wear, damage or a rebuild calls for matching parts inside the transmission area. The set is shown with molded black drivetrain pieces such as gear elements, housing-style parts and a ring-shaped spacer component. Toothed gears transfer motion by meshing with one another, while the shaped case parts support correct placement of the internal mechanism during repair or reassembly. This makes the set useful when a compatible chassis needs specific transmission parts rather than a full overhaul with unrelated components. The 8-piece format also keeps the scope focused on the relevant section of the build. On the bench, the set supports planned maintenance as well as targeted replacement after heavy running sessions. It also fits neatly into a spare-parts collection for TT-01D TYPE-E and TT-01 TYPE-E chassis, where matching drivetrain components help keep future repair work straightforward.  Warning! Not suitable for children under 14 years.

TT-01/E/R G-Parts Gear Set, drivetrain spare parts
TT-01/TNS/M-05 Bevel Gear Set, RC spare part

Gears & motor pinions

TT-01/TNS/M-05 Bevel Gear Set, RC spare part

300051008

€6.39

The TT-01/TNS/M-05 Bevel Gear Set is an RC spare part for differential maintenance on selected chassis from the Tamiya range. Metal bevel gears with conical, angled teeth are designed to mesh within the differential assembly, where they help keep drivetrain movement consistent as the transmission changes load through corners and acceleration. This set is specified for M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO, TT-01D TYPE-E and TT-01 TYPE-E chassis. The scope of delivery contains 1 bevel gear set diff., making it a focused replacement choice when the differential internals need renewal rather than a full gearbox rebuild. The visible parts layout includes larger gears with square centre openings, smaller matching gears with round centre holes and a 3-arm metal piece shaped for the assembly. That combination points to the internal differential gear train rather than external transmission parts. In workshop use, this kind of spare part suits planned servicing after extended running sessions or a targeted repair when a compatible chassis shows drivetrain wear. Kept alongside other maintenance parts, it also helps support faster rebuilds between track sessions and regular bench work on M-05, M-06 and TT-01 TYPE-E based models.  Warning! Not suitable for children under 14 years.

TT-01/TNS/M-05 Bevel Gear Set, RC spare part
TT-02 A Parts Upright, chassis spare parts

Axes & drive shafts

TT-02 A Parts Upright, chassis spare parts

300051527

€8.59

TT-02 A Parts Upright brings a focused replacement set to workshop repairs on compatible Tamiya on-road chassis. The 1x A-Parts pack contains 30 pieces and is intended for restoring worn or damaged sections with matching molded components that fit the original platform layout. Compatibility covers the TT-02 chassis as well as TT-02FT, TT-02RR, TT-02 TYPE-S and TT-02 TYPE-SR variants, which makes this set useful when several related builds share service parts on the bench. The black molded parts are suited to repair tasks around upright and chassis assemblies where exact platform matching matters during maintenance. As a dedicated spare-parts pack, the set supports targeted replacement instead of buying a full kit again. The grouped format also helps keep rebuild work organized when a damaged section needs to be exchanged during routine servicing. On a hobby bench, the pack can be kept alongside frequently used service parts for quick access during teardown and reassembly. It also fits planned maintenance on running chassis that need fresh molded components after wear, impact damage or repeated rebuild cycles.  Warning! Not suitable for children under 14 years.

TT-02 A Parts Upright, chassis spare parts
TT-02 Adjustable Upper Arm Set, RC chassis parts

Axes & drive shafts

TT-02 Adjustable Upper Arm Set, RC chassis parts

300054874

€26.29

The TT-02 Adjustable Upper Arm Set adds a tunable suspension link setup to TT-02 based chassis, using turnbuckle shafts to adjust camber from 0° to 2°. That range gives model builders a clear way to alter wheel angle for track setup, cornering balance and alignment work while keeping the mechanism mechanical and direct. The set is compatible with TT-02, TT-02RR and TT-02D chassis and replaces the kit upper arm parts B13 and B17. Front arm assembly uses 3x18 mm turnbuckle shafts and a target overall length of about 49.5 mm, while the rear arms use the same shaft size with a target length of about 44.5 mm. The instructions also note left and right orientation on the front arms, suspension ball insertion, grease application at the mounting points and a 3x5 mm screw for camber adjustment examples. Use with assembly universal shafts rather than standard resin drive shafts. Item 42236 is used when adjusting. This set suits rebuilds, suspension maintenance and chassis tuning sessions where repeatable measurements matter. On a bench setup, the stated arm lengths and the 0° to 2° camber range give a concrete starting point before final checks with a camber gauge and further trackside refinement.  Warning! Not suitable for children under 14 years.

TT-02 Adjustable Upper Arm Set, RC chassis parts
TT-02 B Parts Suspension Arm for TT-02 Chassis

Axes & drive shafts

TT-02 B Parts Suspension Arm for TT-02 Chassis

300051528

€14.29

The TT-02 B Parts Suspension Arm set supplies a focused replacement pack for the suspension section of compatible TT-02 chassis variants. With 48 pieces in the set, it supports repair and maintenance work where worn, damaged or missing parts need to be exchanged so the chassis can be rebuilt with matching components and a consistent fit. Compatibility covers TT-02FT, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S and TT-02 chassis. That range makes the set useful for keeping several related platforms in service with one dedicated parts group rather than mixing unmatched components. The B parts designation also helps identify the correct section during workshop organisation, rebuild planning and parts replacement. The set is intended for model and RC use, where suspension geometry and secure mounting points matter during assembly and ongoing upkeep. On the bench, this parts pack suits routine servicing after repeated running sessions, accident damage or a chassis refresh during a larger rebuild. It also works as a practical spare set for hobby storage, so a compatible TT-02 platform can return to assembly or repair work with the correct replacement group already at hand.  Warning! Not suitable for children under 14 years.

TT-02 B Parts Suspension Arm for TT-02 Chassis
TT-02 Ball Bearing Set, RC accessory, 16 pieces

Axes & drive shafts

TT-02 Ball Bearing Set, RC accessory, 16 pieces

300054476

€35.49

The TT-02 Ball Bearing Set brings a direct mechanical upgrade to supported TT-02 chassis builds by replacing friction-heavy rotating points with 16 metal ball bearings. That change reduces drive losses in the transmission, so more of the drive system's output reaches the wheels with less drag during running sessions. This set is supplied as a 16-piece bearing pack and is intended for the TT-02RR chassis and the TT-02FT chassis. Ball bearings are a common first tuning step because they support smoother rotation than standard bushings and reduce resistance across the drivetrain. The lower friction can also help extend running time, while the bearing construction is stated to increase bearing life. As an RC accessory rather than a complete vehicle, the set focuses on one specific upgrade area and keeps the installation scope clear. On a fresh build or an already running chassis, the bearings suit workshop tuning aimed at cleaner transmission movement and more efficient power delivery. The compact metal components fit naturally into maintenance, rebuild, or upgrade sessions where the goal is a more refined TT-02 drivetrain rather than a visual change.

TT-02 Ball Bearing Set, RC accessory, 16 pieces
TT-02 C Parts Cup Joint, chassis spare parts

Axes & drive shafts

TT-02 C Parts Cup Joint, chassis spare parts

300051529

€9.99

The TT-02 C Parts Cup Joint set is a chassis spare parts pack for TT-02 platform maintenance, with 9 included pieces supplied as 1x C parts set. It supports direct replacement work on compatible TT-02, TT-02D and TT-02FT chassis, where matching joint and coupling sections are needed to keep the original mechanical layout in service. The set is intended for model workshop tasks such as replacing worn connection parts, refreshing a used drivetrain area or preparing a rebuild with the correct C section components. The included parts are shown as black moulded components with metal shafts, a combination suited to connection points that need accurate fit between linked assemblies. Because this pack is a dedicated spare parts set rather than a universal assortment, the chassis designation matters: TT-02RR is excluded and should not be paired with these parts. For rear axle work, the fit note is equally specific, as 2 sets are required to manufacture the long rear wheel axle. On the bench, this set suits planned servicing, fault tracing and parts replacement on compatible TT-02 family builds. It also works as a practical stock spare for ongoing upkeep, where having the correct C parts ready can shorten downtime between runs and rebuild sessions.  Warning! Not suitable for children under 14 years.

TT-02 C Parts Cup Joint, chassis spare parts
TT-02 Cup Joint for Universal Shaft, RC part

Axes & drive shafts

TT-02 Cup Joint for Universal Shaft, RC part

300054477

€12.79

The TT-02 Cup Joint for Universal Shaft is a dedicated RC drivetrain part for TT-02 chassis builds using the 53792 RC Universal Shaft Assembly. This set contains 2 steel gearbox joint shafts that replace the standard molded drivetrain parts at the gearbox connection points, bringing a more precise mechanical link into the transmission layout. The steel construction gives these cup joints a clear material change at a high-load area of the drivetrain, where rotating parts meet and transfer drive through the universal shaft system. Each joint uses a stepped shaft section with a flange and a forked end profile shaped for its gearbox role, so the parts are built around the actual connection geometry rather than acting as a generic insert. The set is intended as a compatibility-specific upgrade, not a universal spare, and it must be paired with the 53792 RC Universal Shaft Assembly for use. In workshop use, these 2 joints suit maintenance, drivetrain refreshes and planned tuning on a TT-02 chassis already set up for universal shafts. They fit naturally into rebuilds where the gearbox end of the driveline is being updated with matching metal connection parts for consistent running.

TT-02 Cup Joint for Universal Shaft, RC part
TT-02 G Parts Gear Set, RC drivetrain spare parts

Gears & motor pinions

TT-02 G Parts Gear Set, RC drivetrain spare parts

300051531

€7.19

TT-02 G Parts (Gear) brings the core internal pieces of a differential and gearbox service set into one focused spare-parts pack for compatible RC chassis. The layout shown includes differential housing cups, cross-shaped spider gear shafts, multiple bevel gears, a large spur gear and a small bushing or sleeve, giving a clear base for drivetrain maintenance where worn transmission parts need replacement. Inside the differential, the bevel gears and cross shafts form the mechanism that lets drive pass through the axle while allowing the left and right sides to rotate at different speeds in a turn. The housing cups hold these internal gears in position, while the larger toothed gears connect the differential assembly to the rest of the transmission. This makes the set useful for restoring gear mesh, replacing damaged internal parts or rebuilding a gearbox after heavy running. The black molded finish also makes the individual shapes easy to identify on the bench during sorting and fitting. In workshop use, the set suits routine servicing, targeted repairs and full differential rebuilds on a compatible TT-02 platform. It also works as a practical stock spare for RC owners who keep drivetrain wear parts ready between maintenance sessions.

TT-02 G Parts Gear Set, RC drivetrain spare parts
TT-02/D A-Parts Front Uprights RC Spare Parts

Axes & drive shafts

TT-02/D A-Parts Front Uprights RC Spare Parts

319000614

€16.79

The TT-02/D A-Parts Front Uprights set is a focused spare-parts pack for maintenance on compatible TT-02/D chassis builds. Supplied as 2 front uprights, it addresses a specific front-end component group and helps restore the intended mounting position in the suspension assembly. The parts are moulded pieces designed for direct use as A-Parts within the TT-02/D layout. That makes this set useful when wear, impact damage or repeated running has affected the original uprights and a full chassis parts replacement is unnecessary. Replacing only the front uprights keeps repair work concentrated on the affected area and supports a more efficient rebuild process. The pack format also provides a matched pair, which is practical when both sides of the front suspension need attention at the same time. In workshop use, this kind of spare set fits routine servicing, damage repair and planned refresh work between running sessions. The clearly defined component scope also makes it easier to keep a compatible chassis in running condition with the exact parts group needed for the front end.  Warning! Not suitable for children under 14 years.

TT-02/D A-Parts Front Uprights RC Spare Parts
TT02B C Parts, RC spare parts, suspension set

Axes & drive shafts

TT02B C Parts, RC spare parts, suspension set

319000563

€15.29

TT02B C Parts provide a focused spare parts set for RC model servicing, centered on suspension arms and body mount components for the TT02B platform. The molded pieces arrive attached to sprues, which keeps the shapes together for identification before trimming and fitting at the workbench. The set is built around replacement and maintenance use rather than a complete vehicle build. In addition to the suspension arms and body mount elements named in the designation, the visible molded frame also carries related structural pieces that support chassis repair tasks and parts matching during upkeep. The black finish makes the contours, mounting holes and connection points easy to read while comparing old and new pieces side by side. This helps when checking orientation before installation and when separating the required parts for a specific repair. TT02B C Parts suit routine workshop jobs such as replacing worn running gear pieces, refreshing damaged mounting sections after use, or keeping spare components ready between driving sessions. On a hobby bench, the grouped sprues support a tidy workflow while the dedicated fit for the TT02B keeps the repair process focused on the correct chassis family.  Warning! Not suitable for children under 14 years.

TT02B C Parts, RC spare parts, suspension set
TT02B N Parts, drive shaft and wheel axle set

Axes & drive shafts

TT02B N Parts, drive shaft and wheel axle set

319115153

€10.49

TT02B N Parts provide a focused replacement set for compatible model vehicle maintenance, combining drive shaft pieces and wheel axle components in one pack. The black moulded parts are supplied on sprues, with metal pins and threaded posts already integrated into selected pieces, giving each assembly point a clear mechanical role during fitting. The set is suited to repair work where worn, damaged or missing drivetrain and axle parts need to be brought back into service with matching components. The drive shaft pieces handle rotational transfer within the running gear, while the wheel axle parts form the connection point for the wheel assembly. Slotted cylindrical sections and shaped mounting points help distinguish the individual parts before removal from the frame. This makes the set useful not only for direct replacement, but also for keeping spare components ready for workshop storage alongside an existing TT02B build. On the bench, the sprue format helps organise the parts before cutting and installation. During servicing, the grouped layout supports a more orderly check of axle hardware and drivetrain pieces, whether the task is a single-part swap or a broader chassis refresh for continued running use.  Warning! Not suitable for children under 14 years.

TT02B N Parts, drive shaft and wheel axle set
Upright Lunch Box Spare Part Set for 58063

Axes & drive shafts

Upright Lunch Box Spare Part Set for 58063

300555028

€11.29

This spare part set supplies 2 upright assemblies for the Lunch Box model 58063 and gives repair or rebuild work the matching components for a clean replacement. Each assembly pairs a molded white arm with a polished metal shaft, creating a compact mechanical unit that fits the role shown in the original layout. The arm on each piece has a round pivot opening at one end and 2 smaller linkage holes near the curved tip. That hole pattern supports different linkage mounting positions within the compatible control setup, while the threaded shaft end provides a clear fixing point during installation. The paired format matters here, because both matching pieces are supplied together rather than as a single side only. For maintenance work on a used chassis, that makes it easier to replace worn or damaged parts as a balanced set. The set suits workshop use when a Lunch Box 58063 needs fresh running gear hardware in the upright area or when an older build is being returned to working order. It also fits parts storage for ongoing RC maintenance, where model-specific replacements help keep a compatible vehicle ready for the next rebuild or repair session.  Warning! Not suitable for children under 14 years.

Upright Lunch Box Spare Part Set for 58063
XM-01 C Parts Uprights, chassis spare parts

Axes & drive shafts

XM-01 C Parts Uprights, chassis spare parts

300051748

€7.99

XM-01 C Parts Uprights provide a dedicated replacement set for the TAMIYA XM-01 chassis, centered on the wheel-mounting and suspension connection area where precise fit matters most. The black molded parts shown here include paired structural pieces for left and right installation, along with small matching rings and caps that complete the set for chassis service work. The main components feature circular seats for bearings or bushings, plus clearly formed pivot and mounting points that tie into the surrounding running gear. Reinforced ribs in the molding add shape to the upright structure, while the mirrored layout reflects the left and right geometry needed at each side of the chassis. This makes the set useful when an existing build needs damaged parts replaced, when a stored chassis is being brought back into running condition, or when spare hardware is kept on hand for routine workshop maintenance. On the bench, these chassis parts support a tidy repair process by replacing like-for-like XM-01 components instead of adapting universal pieces. During running sessions, correctly fitted uprights help the wheel assemblies sit as intended within the chassis layout, which is especially relevant after knocks, wear or repeated disassembly during tuning and upkeep.  Warning! Not suitable for children under 14 years.

XM-01 C Parts Uprights, chassis spare parts
XM-01 D Parts, chassis spare parts, suspension arms

Axes & drive shafts

XM-01 D Parts, chassis spare parts, suspension arms

300051749

€7.99

XM-01 D Parts bring the correct suspension arm set back to the TAMIYA XM-01 chassis, whether the goal is replacing worn components or completing a chassis build with matching parts. The black molded pieces show the dedicated shape of this set clearly, with mirrored forms arranged for left and right installation points. The arm design uses reinforced triangular ribbing across each piece, adding structure to the molded form while keeping the mounting layout precise for the XM-01 platform. Cylindrical connection points at the ends define where the arms seat into the chassis assembly, and the molded geometry follows the specific layout required by this spare part group. The set is suited to workshop maintenance where damaged arms need to be exchanged for matching replacements, and it also supports rebuilds that call for the original D Parts designation. The compact component group focuses on a single chassis area, making it a direct choice when suspension hardware needs to be restored with the correct part family. On the bench, these parts fit naturally into repair sessions, rebuild work and planned spare stock for the XM-01 chassis. For model keepers who maintain running cars over time, a dedicated arm set like this helps return the suspension area to its intended configuration with parts made for that exact platform.  Warning! Not suitable for children under 14 years.

XM-01 D Parts, chassis spare parts, suspension arms
XV-01 G Parts Gears, spare part set for chassis

Gears & motor pinions

XV-01 G Parts Gears, spare part set for chassis

300051506

€4.79

XV-01 G Parts Gears is a spare part set for the gearbox section of selected RC chassis and supplies 4 dedicated components for transmission maintenance. The set is suited to builders who need the named G Parts area rather than a full rebuild pack, making it easier to replace the exact pieces used inside the drivetrain. Compatibility is stated for XV-01, XV-01 PRO, XV-01T, TD4, TD2 and FF-04 EVO chassis. That cross-platform fit makes the set useful for keeping several running models in service with one reference pack. The included parts are shown as dark mechanical components with toothed gear forms and mounting points, indicating their role in transferring drive through the gearbox assembly. As a chassis-specific spare set, it supports repair work after wear, damage or routine inspection of internal transmission parts. On the workbench, the set fits naturally into a maintenance routine built around checking drivetrain function, replacing worn gears and restoring smooth mechanical engagement in compatible chassis. It also works well as a backup spare kept with an RC parts collection for faster turnaround when a gearbox service is due.  Warning! Not suitable for children under 14 years.

XV-01 G Parts Gears, spare part set for chassis
XV-01 K Parts Steering Arm Chassis Spare Set

Axes & drive shafts

XV-01 K Parts Steering Arm Chassis Spare Set

300051508

€11.39

The XV-01 K Parts Steering Arm set supplies 9 molded components for chassis service work on selected Tamiya platforms. Designed for the steering arm area, the set supports accurate replacement when original parts are worn, damaged or missing, helping bring back the intended mounting layout and mechanical function. Compatibility is stated for the FF-04 EVO chassis, XV-01 chassis, XV-01 PRO chassis and XV-01T chassis, which makes this pack a practical match for several related RC builds. The black molded parts are suited to repair benches, rebuild projects and routine maintenance where the correct shape and fit are essential. The supplied pack contains 1x K-Parts set with 9 parts, giving a defined contents list for planning a chassis refresh or targeted replacement task. The data also notes that only KK parts can be used where specified. On the workbench, this set fits the kind of maintenance session where a steering assembly needs fresh hardware after wear or impact. It also suits keeping a compatible chassis in running condition between driving sessions, with the replacement parts ready to install into the matching platform.  Warning! Not suitable for children under 14 years.

XV-01 K Parts Steering Arm Chassis Spare Set
XV-02 06 Module Spur Gear 70T, RC spare part

Gears & motor pinions

XV-02 06 Module Spur Gear 70T, RC spare part

300051694

€3.69

The XV-02 06 Module Spur Gear 70T is a drivetrain spare part for XV-02 chassis cars, built around a 70-tooth gear profile in 0.6 module sizing. As a direct replacement component, it supports maintenance work when a worn transmission gear needs to be exchanged or when the drivetrain specification is being restored to the stated setup. The set contains 1 spur gear and 2 matching ring parts. The gear face shows a molded 70 marking for clear identification, along with a large central hole, smaller circular openings and recessed cutouts across the wheel. These visible details help distinguish the part during bench work and parts sorting, especially when several drivetrain components are stored together. The toothed outer edge is shaped for meshing within the transmission system used on the compatible chassis. In workshop use, this spare part suits routine servicing, repair after wear, or keeping a correct replacement ready in the pit box. Compatibility is stated for XV-02 chassis cars, so the part can be selected specifically for that platform instead of as a generic gear. The compact format also makes it practical as backup stock for regular running sessions and scheduled drivetrain upkeep.

XV-02 06 Module Spur Gear 70T, RC spare part
XV-02 E Parts, rear uprights spare set

Axes & drive shafts

XV-02 E Parts, rear uprights spare set

300051699

€7.29

XV-02 E Parts brings the rear upright section for compatible XV-02 chassis cars back into the spare parts range, with 2 replacement pieces supplied for the rear suspension area. The set is intended for maintenance work where the original uprights need to be replaced after wear or damage. As E parts for the XV-02 platform, these components are made to match the rear upright position used on that chassis layout. That makes the set useful for planned servicing, repair work after hard running, or keeping matching replacements ready in a workshop parts box. The pack focuses on one specific component group rather than a mixed hardware assortment, which helps keep repairs targeted and straightforward when the rear end needs attention. In regular RC maintenance, rear uprights are one of the chassis-specific parts that need the correct match to restore the intended suspension arrangement. This set supports that job on compatible XV-02 cars with 2 identical replacement parts for the rear position. It fits naturally into rebuild sessions, trackside repairs, or routine upkeep between runs when worn suspension parts need to be exchanged.

XV-02 E Parts, rear uprights spare set
39/40T RingGear, spare gear set for XV-02 TT-02

Gears & motor pinions

39/40T RingGear, spare gear set for XV-02 TT-02

300051704

soon available again

This spare gear set brings the key drivetrain parts for direct coupling service into one focused pack. The set contains 2 direct coupling ring gears, one with 39 teeth and one with 40 teeth, plus 2 bevel pinion gears matched to those tooth counts. That layout gives a clear replacement route when the front direct coupling assembly needs the specified parts for continued use. The parts are named for Item 22047, the XV-02/TT-02 Front Direct Coupling Set with 39T, which places this set squarely in the drivetrain area rather than as a general hardware assortment. The 39T ring gear works with its dedicated bevel pinion gear, and the 40T ring gear works with its own matching pinion, so each pairing stays tied to the correct tooth count. The image-supported layout also makes the difference between the 2 ring gear options easy to identify during bench work, with each larger ring gear shown alongside its smaller mating pinion. Compatibility is stated for XV-02 and TT-02 chassis cars, making the set a practical choice for maintenance, repair, or keeping the correct replacement gears on hand between running sessions. On a workbench, the paired parts support straightforward selection when servicing the front direct coupling area of those chassis platforms.

39/40T RingGear, spare gear set for XV-02 TT-02
39T Ring Gear XV-02/TT-02 GD, RC spare parts

Gears & motor pinions

39T Ring Gear XV-02/TT-02 GD, RC spare parts

300051695

soon available again

This RC spare parts set centers on a 39T ball differential ring gear and a 15T bevel pinion gear for XV-02 and TT-02 chassis cars. The matched gear pairing supports the differential drive path where torque changes direction through the bevel teeth, making it a focused replacement choice for drivetrain maintenance on compatible models. Alongside the 2 gears, the set also provides a differential case and a gasket. That combination covers the main housing and sealing elements around the gear area, so service work can address more than a single worn tooth or damaged gear face. The square center opening on the bevel pinion and the mounting pattern on the ring gear are shaped for their intended assembly points, while the gasket sits between housing parts where a clean fit matters. As a dedicated spare parts pack, the set is aimed at repair, rebuild, or routine drivetrain upkeep rather than general customization. On the bench, these parts suit planned maintenance after repeated running sessions or a targeted differential rebuild on an XV-02 or TT-02 chassis car. The separate components also make it easier to replace the affected drivetrain section with matching parts from one set instead of sourcing each piece individually.

39T Ring Gear XV-02/TT-02 GD, RC spare parts
Ball Diff. Joint right MB14, model spare part

Axes & drive shafts

Ball Diff. Joint right MB14, model spare part

313455252

soon available again

This Ball Diff. Joint right MB14 is a dedicated model spare part for compatible assemblies that use the specified Group C version. The named right-side format gives a clear replacement reference when an existing joint is worn, missing or needs to be exchanged during maintenance. The MB14 code identifies the joint type directly, which helps keep parts matching tied to the stated designation instead of relying on visual comparison alone. As a single replacement component, it suits repair tasks where only the affected connection point needs attention rather than a broader rebuild. The Group C note further narrows the intended application within the stated model context. That makes this spare part useful for keeping an existing build in running condition with the exact named joint format. In a workshop setting, small drivetrain replacements like this are often kept on hand for routine upkeep between running sessions or service intervals. The clearly stated right-hand version also helps separate it from mirrored or side-specific hardware when preparing parts for maintenance.

Ball Diff. Joint right MB14, model spare part
C Parts R.Suspen./Gearb., RC spare parts sprue

Axes & drive shafts

C Parts R.Suspen./Gearb., RC spare parts sprue

319005130

soon available again

C Parts R.Suspen./Gearb. is a dedicated RC spare parts sprue for the 58618 Mt.Beetle, centered on rear suspension and gearbox components. The black molded frame groups the matching pieces in one place, giving repair and replacement work a clear starting point when an original section needs to be renewed. The sprue format keeps the individual parts attached until trimming, which helps with handling and identification during workshop preparation. Visible on the frame are larger housing-style sections, round cover-like pieces, bracket forms and smaller connector details, all molded as technical components rather than generic craft material. This format also helps confirm that the replacement shapes match the intended assembly area before fitting begins. For RC model maintenance, that matters most when gearbox and suspension sections need the correct geometry at their mounting points. Used during a rebuild, after wear, or when a damaged section needs to be exchanged, this spare parts frame supports a direct return to the specified model configuration. It fits naturally into a hobby bench setup focused on servicing an existing 58618 Mt.Beetle rather than starting a new full kit. Batteries are not included.  Warning! Not suitable for children under 14 years.

C Parts R.Suspen./Gearb., RC spare parts sprue
C-Parts 1, CC-02 spare parts tree

Axes & drive shafts

C-Parts 1, CC-02 spare parts tree

310015091

soon available again

C-Parts 1 for the 58675 CC-02 is a spare parts tree built around technical replacement work on the CC-02 platform. The black molded runner groups multiple matching components in one set, making it easier to identify and remove the needed section during a repair, rebuild or maintenance session at the bench. Visible shapes on the sprue include suspension-style arms, steering or hub mount forms, housing sections, small mounting blocks and curved cover-like pieces. The layout keeps related parts attached until use, which helps with storage between service jobs and reduces the risk of mixing loose components. Two gear-housing style forms and several connection points indicate use around axle, steering and drivetrain assemblies, while the one-piece runner format supports orderly parts handling when a worn or damaged section needs replacement. This set suits hobby use where the goal is to restore fit and function with matching CC-02 parts rather than improvise with non-matching hardware. It works well as a workshop spare for ongoing maintenance, for replacing broken chassis-area pieces after running sessions, or for keeping a current build on schedule when one specific molded section is needed.

C-Parts 1, CC-02 spare parts tree
CC-02/CR-01 Propeller Shaft, RC spare part

Axes & drive shafts

CC-02/CR-01 Propeller Shaft, RC spare part

300051327

soon available again

The CC-02/CR-01 Propeller Shaft is an RC spare part for compatible chassis, supplied as 1 drive shaft for drivetrain maintenance or replacement. Its dedicated fit for the CC-02 and CR-01 platforms keeps part selection straightforward when an existing build needs a fresh shaft in the driveline. The scope of delivery contains 1 drive shaft. The plastic construction matches the stated material specification, which matters when replacing a worn component with the correct version for the chassis layout already in use. As a focused spare part rather than a general accessory, it is intended for targeted service work on the transmission path between connected drivetrain components. The compact replacement format also makes it practical to keep on hand with workshop spares for regular RC maintenance. This shaft suits repair work after wear, as well as planned parts replacement during a rebuild of a CC-02 or CR-01 model. In a bench setup, it supports quick identification of the correct chassis application before installation into an existing driveline.  Warning! Not suitable for children under 14 years.

CC-02/CR-01 Propeller Shaft, RC spare part
Counter Gear 58043/58336 Hornet spare gear

Gears & motor pinions

Counter Gear 58043/58336 Hornet spare gear

310004839

soon available again

Counter Gear 58043/58336 Hornet is a dedicated replacement gear for compatible Tamiya model vehicle assemblies, built to restore the transmission function with the correct compound layout. The part combines 2 gear stages on one central hollow shaft, with a larger lower spur gear and a smaller upper gear formed as one piece for accurate placement in the drivetrain. The moulded white gear body is shaped for mechanical fit rather than decoration, and the 4 round holes in the larger gear face provide a clear visual identifier during servicing. As a spare part in the Models Supplies range, it is suited to maintenance work when a worn or damaged transmission gear needs to be replaced with the matching component. The integrated double-gear format supports the transfer of drive between meshing stages inside the compatible gearbox, where alignment and tooth engagement matter for consistent running. This gear belongs in the workshop, parts box or rebuild bench for compatible Hornet-related maintenance tasks. It can be fitted during transmission repair, routine overhaul or when bringing an older chassis back into running condition with the correct replacement component.

Counter Gear 58043/58336 Hornet spare gear
DF-03 Bevel Gear Set, spare part for chassis

Gears & motor pinions

DF-03 Bevel Gear Set, spare part for chassis

300051247

soon available again

The DF-03 Bevel Gear Set is a dedicated spare part pack for maintenance on the DF-03 chassis. With 5 included components in one set, it supports drivetrain service work where worn or damaged bevel gears need to be replaced with parts matched to the original platform. The pack contains 1 gear bevel gear set with 5 pieces, supplied as replacement components rather than as a universal transmission assortment. The moulded parts show the gear forms, centre holes and contact surfaces needed for installation in a compatible DF-03 layout. This makes the set useful for routine workshop stock, planned rebuilds or targeted repairs after heavy running. Because the parts are specified for the DF-03 chassis, compatibility stays clear during maintenance and parts selection. On the bench, the set fits naturally into gearbox servicing, drivetrain refreshes and rebuild work on an existing model. It can be kept alongside other running spares for the DF-03 platform, ready for the next transmission check or replacement job.  Warning! Not suitable for children under 14 years.

DF-03 Bevel Gear Set, spare part for chassis
DF-03 C-Parts Front Upright Steering Arm Set

Axes & drive shafts

DF-03 C-Parts Front Upright Steering Arm Set

300051250

soon available again

The DF-03 C-Parts Front Upright Steering Arm Set is a dedicated spare parts pack for the DF-03 chassis and focuses on the front steering area where precise component fit is essential. Supplied as 1 C parts tree with 6 parts, the set groups the matching pieces in one place for straightforward identification during maintenance, repair or a planned rebuild. The included components are shaped for the front upright and steering arm section, with mirrored larger pieces and smaller connecting elements that suit the geometry of this chassis area. That layout helps when replacing worn or damaged parts while keeping the original mounting positions and linkage arrangement consistent. The black and dark gray moulded finish also makes the individual forms and mounting holes easy to distinguish on the bench during parts sorting and assembly checks. This set suits workshop stock for an existing DF-03 vehicle, whether the goal is to replace a single damaged section or refresh the front end during a broader service. In a hobby room or trackside pit setup, having the correct C-Parts sprue ready can shorten downtime and keep a DF-03 chassis prepared for the next running session.  Warning! Not suitable for children under 14 years.

DF-03 C-Parts Front Upright Steering Arm Set
DF-03 Spur Gear Set, RC spare part for chassis

Gears & motor pinions

DF-03 Spur Gear Set, RC spare part for chassis

300051248

soon available again

The DF-03 Spur Gear Set is a dedicated RC spare part for the DF-03 chassis and supplies 4 replacement gears for transmission service. With 2 large gears, 1 medium gear and 1 small gear in the set, it covers several gear positions used in the drivetrain and gives rebuilds a direct parts match for this chassis platform. The gear shapes shown in the set use a classic spur gear layout, where straight-cut teeth mesh with neighbouring gears to pass motor drive through the transmission. That makes the set useful when worn teeth, damaged gear faces or general drivetrain use call for fresh components. The loose parts format also helps with selective replacement, since only the affected gear position needs to be changed rather than replacing unrelated transmission parts at the same time. Scope of delivery: 1x main gear set with 4 pieces. On the workbench, the set fits naturally into routine DF-03 servicing, rebuilds after heavy use, or parts storage for future repairs. Kept alongside other chassis spares, these gears support faster maintenance planning whenever a compatible DF-03 transmission needs attention.  Warning! Not suitable for children under 14 years.

DF-03 Spur Gear Set, RC spare part for chassis
DT-03/02 A-Parts, spare parts set for RC models

Gears & motor pinions

DT-03/02 A-Parts, spare parts set for RC models

309005783

soon available again

DT-03/02 A-Parts 58344 supplies a dedicated replacement sprue for RC model maintenance, with black molded sections shaped for mechanical housing duties. The visible parts include cover and case pieces with circular openings, raised cylindrical forms and multiple mounting holes, giving repair work a direct match to the original layout. Ribbed structural detailing adds definition to the molded sections and helps distinguish each area during sorting and fitting. Because the parts remain attached to the runner, each section stays organized until removal, which supports careful preparation at the workbench. The set is identified as A Parts for 58344, making it a targeted choice when a rebuild calls for the correct molded frame sections rather than a generic hardware assortment. The glossy black finish matches the look typically used for enclosed chassis and gearbox areas. On a repair bench, the sprue format helps with checking shapes and positions before cutting each section free. It also suits keeping a dedicated replacement set on hand for future service work on a compatible build, especially when a damaged cover or casing section interrupts running sessions.  Warning! Not suitable for children under 14 years.

DT-03/02 A-Parts, spare parts set for RC models
DT-04 Freewheel Axles Long, RC spare part

Axes & drive shafts

DT-04 Freewheel Axles Long, RC spare part

300022095

soon available again

DT-04 Freewheel Axles Long is a dedicated RC spare part for compatible Tamiya model assemblies. The long axle format supports accurate replacement where the running gear requires this specific version, and the metal construction matches the technical character expected from a drivetrain hardware component. The visible design combines a threaded section, a smooth cylindrical shaft and a locking element, indicating a part made to seat mechanically in a defined mounting point rather than a general-purpose fastener. That combination matters during maintenance because the thread handles fastening while the shaft section aligns the part in use. The long specification distinguishes it from shorter axle variants and helps maintain the intended geometry of the matching DT-04 setup. As a single-purpose replacement component, it belongs in repair stock for existing builds that need the correct axle pattern rather than an improvised substitute. In workshop use, this kind of spare part supports routine servicing after wear, loss or damage to original hardware. It also fits planned rebuilds where a compatible chassis is being refreshed with the correct replacement parts, keeping the assembly focused on proper fit and function.  Warning! Not suitable for children under 14 years.

DT-04 Freewheel Axles Long, RC spare part
F104/W/F103 Front Support Arm, Carbon Part

Axes & drive shafts

F104/W/F103 Front Support Arm, Carbon Part

300054153

soon available again

This carbon-reinforced front support arm is specified for F104, F104W and F103 chassis applications and serves the front support area where an exact replacement part keeps a model's structure consistent. The dedicated fit makes it a practical choice when an existing arm shows wear, damage or loss during maintenance. Used in the front section of compatible chassis, the part supports orderly repairs and helps keep a build aligned with the original F104/W/F103 layout. The carbon-reinforced construction is the key material detail stated for this component, giving the part its defined specification within the range. Its naming also makes workshop identification more direct when several chassis families and spare parts are stored together. As a model supply rather than a complete kit, it is aimed at repair, upkeep and parts replacement on existing compatible cars. On the bench, this type of spare part fits naturally into rebuild sessions, front-end servicing and pre-run checks on F104, F104W or F103 models. It also works well as a stocked replacement for hobby rooms, pit boxes and parts drawers where the correct chassis-specific component saves time during ongoing maintenance.  Warning! Not suitable for children under 14 years.

F104/W/F103 Front Support Arm, Carbon Part
Gear Bag 58618 Mt.Beetle, RC spare gear set

Gears & motor pinions

Gear Bag 58618 Mt.Beetle, RC spare gear set

319335026

soon available again

Gear Bag 58618 Mt.Beetle is a dedicated RC spare parts set for drivetrain maintenance on the specified Tamiya model. The set contains 2 moulded gears: a large spur gear with a central mounting hole and 3 triangular spoke cutouts, plus a compound gear that combines a large outer gear with a smaller integrated pinion. This layout supports a like-for-like replacement where the original geared transmission needs fresh parts. The visible tooth form and centre bores make the parts easy to identify during servicing, while the compound construction keeps the paired gear stages in one piece. That matters when a repair calls for the original gearing arrangement rather than a mixed substitute. The cream-coloured finish also helps distinguish these gears from other workshop parts during sorting and installation. As replacement components rather than a general accessory, they are aimed at keeping an existing RC vehicle in running order with the correct matching shapes. On the bench, the set fits naturally into routine maintenance, rebuilds after wear, or a parts box kept for model support. It also suits a targeted repair when inspection shows damaged teeth or a worn transmission gear in the Mt.Beetle assembly.  Warning! Not suitable for children under 14 years.

Gear Bag 58618 Mt.Beetle, RC spare gear set
Gear Bag for 58106, RC spare gear set

Gears & motor pinions

Gear Bag for 58106, RC spare gear set

309335111

soon available again

This gear bag for the 58106 Stadium Blitzer brings the key transmission elements together in one replacement set, with a large spur gear, a compound gear and a round mounting plate shaped for drivetrain service. The geared parts transfer rotation through meshing teeth, while the central shaft openings support correct placement on the relevant axle points during repair or rebuild work. The large gear uses a broad toothed outer ring for the main driven stage, while the compound gear combines 2 gear diameters in one part to pass motion onward at a different ratio inside the transmission. The round plate adds 3 upright locating pins and 3 smaller peripheral holes, giving the assembly defined reference points for positioning and fastening. The white moulded finish makes the separate shapes easy to distinguish on the bench when comparing worn parts against the replacements. As a model spare part, this set suits maintenance tasks that focus on restoring clean gear engagement and consistent rotational flow. On a workshop table, the 3 parts can be checked against the existing gearbox assembly before installation. During servicing of a 58106 Stadium Blitzer, the set supports targeted replacement of worn internal transmission components rather than changing unrelated parts.  Warning! Not suitable for children under 14 years.

Gear Bag for 58106, RC spare gear set
Gear Bag for Gr. C Chassis, model spare parts

Gears & motor pinions

Gear Bag for Gr. C Chassis, model spare parts

319335089

soon available again

This gear bag supplies drivetrain parts for Gr. C Chassis 70T/0.6 applications, centering the set around a large spur gear and matching support pieces for mechanical replacement work. The cream-white molded parts shown are arranged as individual components, making the set easy to identify when a chassis needs the correct transmission pieces returned to service. The visible contents consist of 1 large toothed gear, 2 flanged ribbed hub-like parts with hexagonal inner openings, and 3 small ring spacers. That combination points to power transfer, axle mounting and spacing functions within the matching chassis layout. The large gear uses a central round hole and 5 smaller mounting holes, while the ribbed parts add structure around the hex openings for placement on the intended mechanical interfaces. The 3 ring pieces support spacing and alignment where rotating parts need controlled positioning. Used during maintenance, rebuilds or parts replacement, this set suits bench work focused on restoring the original gear train arrangement of a compatible Gr. C Chassis model. It also serves as a practical reference set when comparing worn drivetrain pieces against fresh replacement components before installation.  Warning! Not suitable for children under 14 years.

Gear Bag for Gr. C Chassis, model spare parts
Gear Box Joint Bag, spare parts set for 58067

Axes & drive shafts

Gear Box Joint Bag, spare parts set for 58067

309805368

soon available again

This spare parts set supplies 2 gear box joints for 58067 and focuses on one specific maintenance task: restoring the connection point within the gearbox assembly with matching replacement components. The silver-colored metal finish and compact machined form give the set the technical character expected of a model drivetrain part. Each piece is shaped for mechanical engagement, with a knurled grip section that supports controlled handling during fitting and a slotted cup-like end designed to connect with the adjoining assembly. One joint is formed with a longer shaft, while the second is shorter, indicating 2 distinct matching parts within the set rather than duplicate loose hardware. That distinction matters during servicing, where the correct shape helps return the gearbox linkage to its intended layout. The set is supplied as a dedicated bag of replacement parts rather than a general-purpose fitting. On the workbench, these joints suit repair after wear, loss or disassembly, and they also support planned parts stocking for an existing 58067 model. For rebuilds, maintenance sessions or drivetrain refreshes, the set provides the named components needed for the specified reference without relying on improvised substitutes.

Gear Box Joint Bag, spare parts set for 58067
K Parts Fr. Steering Arm, model spare part

Axes & drive shafts

K Parts Fr. Steering Arm, model spare part

319115434

soon available again

K Parts Fr. Steering Arm is a model spare part named for the 58618 Mt.Beetle designation and focused on the front steering area. It provides a direct replacement route when the original steering arm needs to be exchanged, helping return the linkage to its intended mechanical role within the model. The ShortDescription identifies this piece specifically as K Parts Fr. Steering Arm 58618 Mt.Beetle, which gives the part a clear maintenance context instead of leaving it as a generic workshop component. Its role sits in the front steering assembly, where steering input is carried through connected hardware during operation. Keeping the correct spare part on hand can simplify planned maintenance and the replacement of worn steering components. This listing states a spare part rather than a complete vehicle or full kit, so the focus stays on targeted repair of the steering section named in the data. In a model workshop, this kind of replacement piece fits routine service after running sessions or inspection of the front end. It also suits parts storage for builders who keep model-specific spares ready for maintenance tied to the 58618 Mt.Beetle designation.  Warning! Not suitable for children under 14 years.

K Parts Fr. Steering Arm, model spare part
LW Casing for W Cardan, model spare part

Gears & motor pinions

LW Casing for W Cardan, model spare part

300042320

soon available again

LW Casing for W Cardan is a dedicated model spare part set with 2 matching casing pieces for W Cardan applications. The named format keeps replacement work focused on the exact component group rather than a broad universal part, which helps when a drivetrain-related repair calls for the correct casing type. The short designation identifies this set specifically as a casing for W Cardan use, making it suited to maintenance benches, rebuild projects and organised spares storage. A 2-piece quantity supports replacing a pair in one service step or holding a second matching piece in reserve for the next repair cycle. Because the data names this as a spare part rather than a complete kit, the copy stays focused on component replacement and workshop use. This set fits naturally into model servicing sessions where worn or missing drivetrain hardware needs a like-for-like substitute. It also works well as a clearly labelled stock part in a spares drawer, ready for future repairs that call for the LW Casing for W Cardan designation.

New
LW Casing for W Cardan, model spare part
M-03 Assembly Universal Shaft, RC spare part set

Axes & drive shafts

M-03 Assembly Universal Shaft, RC spare part set

300053597

soon available again

The M-03 Assembly Universal Shaft set brings a serviceable drivetrain upgrade to compatible Tamiya chassis with 2 cardan shafts supplied as 15-piece assemblies. Each shaft is built to be assembled and disassembled, giving direct access to the joint parts during installation, cleaning or routine running maintenance. This set is specified for the M-03 chassis and also fits M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO and MF-01X chassis. The interchangeable references 53499, 53500, 53681 and 54410 make it easier to match an existing parts list when refreshing a drivetrain or replacing earlier shaft sets. For MF-01X chassis, the data notes combined use with 54000. The included layout shown for the set covers the shaft components, small hardware and assembly tool needed for the 2 shaft builds. In workshop use, the take-apart construction supports regular inspection of the moving joint sections after repeated running sessions. During a rebuild of an M-chassis touring car, the set gives a clear route to replacing worn drivetrain parts while keeping compatibility across several related platforms.  Warning! Not suitable for children under 14 years.

M-03 Assembly Universal Shaft, RC spare part set
M-08 Concept C Parts, RC spare parts, 2° uprights

Axes & drive shafts

M-08 Concept C Parts, RC spare parts, 2° uprights

300051620

soon available again

The M-08 Concept C Parts set restores a key suspension area on compatible chassis cars with replacement uprights, hub carriers and adapters arranged across 2 sprues. Built around hub carrier parts with a 2° caster angle, this set supports the intended front-end geometry while returning worn or crash-damaged assemblies to running condition. The sprues contain front and rear upright components, and the shared design with the M-07 Concept extends fit across more than one chassis family. Assembly information for the hub carriers shows left and right orientation, plus a 2.5 mm hole preparation step on part C5 before the C6 inserts are fitted. That detail matters when rebuilding the steering or axle mounting area, because the bearing seats, hinge-pin points and linkage mounting locations need the correct direction to align with the chassis hardware. On the bench, this set suits targeted repairs after bumps that affect the wheel mounting or suspension connection points. It also helps keep an M-07 or M-08 Concept car ready for the next maintenance session by replacing the exact corner components rather than changing a full chassis section.

M-08 Concept C Parts, RC spare parts, 2° uprights
M-08/M-07/TA06 Bevel Gear Diff. Set, RC spare part

Gears & motor pinions

M-08/M-07/TA06 Bevel Gear Diff. Set, RC spare part

300051460

soon available again

The M-08/M-07/TA06 Bevel Gear Diff. Set is an RC spare part for restoring the internal gear train of a compatible bevel gear differential. The set contains 2 bevel gear differential sets, with 2 larger bevel gears, 4 smaller bevel gears and 2 cross shafts shown in the included parts layout, giving the drivetrain the internal meshing parts needed to transfer rotation through the diff assembly. Inside the gearbox, the larger bevel gears and smaller pinion gears work together around the cross shafts to distribute drive across the axle while allowing differential action in corners. That mechanism matters when a worn or damaged gear train starts to affect smooth running, because the differential depends on accurate gear engagement at each contact point. Compatibility covers a wide range of chassis: TD4, TD2, DB01, FF-04 EVO, M-08 CONCEPT, M-07 CONCEPT, TA06 MS, TA06, TA06 PRO, TA05 Ver.II, TRF503, TRF211XM, TRF201XMW, XV-01, XV-01 PRO and XV-01T. For chassis-specific installation, TA05 Ver.II uses this set with 54312, DB01 uses it with 54329, and TD4 and TD2 use it with 54471. That makes the set a practical choice for maintenance, rebuilds and drivetrain refresh work on compatible touring, rally and buggy platforms where the differential internals need replacement.  Warning! Not suitable for children under 14 years.

M-08/M-07/TA06 Bevel Gear Diff. Set, RC spare part
M-08/M-07/TA06 Gear Diff. Cup Joint (2), RC spare part

Gears & motor pinions

M-08/M-07/TA06 Gear Diff. Cup Joint (2), RC spare part

300051466

soon available again

This spare part set supplies 2 cup joints for the gear differential on selected Tamiya chassis platforms, giving a precise replacement option when the original drivetrain connection parts need renewal. The set is listed as M-08/M-07/TA06 Gear Diff. Cup Joint (2) and is intended for compatible RC model maintenance rather than a universal fit. Compatibility in the data covers M-08 CONCEPT, M-07 CONCEPT, TA06, TA06 PRO, TA06 MS, FF-04 EVO, TD4, TD2, XV-01, XV-01 PRO and XV-01T chassis. That range helps keep one small service part relevant across several builds in the workshop, especially where the gear differential uses this cup joint format. The scope of delivery contains 2 driver cone diff. parts. For TD4 and TD2 chassis, the data also states use with 54471. In practice, this kind of replacement part suits routine drivetrain servicing, rebuilds after wear, or keeping compatible spares ready between running sessions. The 2-piece pack also supports paired replacement when both matching connection points are being refreshed on the same differential setup.  Warning! Not suitable for children under 14 years.

M-08/M-07/TA06 Gear Diff. Cup Joint (2), RC spare part
Pinion Gear 10T M0.8, model spare part, 23 mm

Gears & motor pinions

Pinion Gear 10T M0.8, model spare part, 23 mm

303505014

soon available again

This 10-tooth pinion gear with module 0.8 is a compact drivetrain spare part for model applications where the gearing specification needs to match the installed setup. The 23 mm format and metal construction give the part a precise mechanical presence suited to motor and transmission assemblies. The gear body shows a toothed drive section, a central mounting opening and a fastening screw for fixing the part onto a shaft. That combination points to direct use in a powered drivetrain, where the pinion transfers motor output into the next stage of the transmission. For maintenance work, the stated 10T and M0.8 specification matters as much as the physical size, because both values determine how the replacement part meshes with the existing gear train. The metallic finish and machined form also make the component easy to identify during workshop sorting and parts checks. In practical use, this spare part fits the moments when a model needs a like-for-like drivetrain replacement or a rebuild based on the same gear standard. It also suits the parts box for ongoing service work, where clearly specified gears help keep repair and setup tasks organised.  Warning! Not suitable for children under 14 years.

Pinion Gear 10T M0.8, model spare part, 23 mm
Stadium Blitzer Right Upright, spare part

Axes & drive shafts

Stadium Blitzer Right Upright, spare part

300445207

soon available again

The Stadium Blitzer Right Upright is a dedicated front replacement part for the model named in the data, built to restore the specific right-side mounting point in the front assembly. Its compact form combines a moulded white body with a metal shaft and a ball stud, giving the part the hard connection surfaces needed where linked components pivot and attach. The geometry shown for this upright focuses on mechanical fit rather than decoration. A circular mounting hole, a short threaded tip and the ball joint connection provide the key interfaces for installation into the surrounding front-end hardware. The part is supplied as 1 front right upright, which keeps the replacement focused on the exact side named in the specification. That makes it useful when wear, damage or loss affects one defined point in the assembly instead of a wider section. In workshop use, this kind of spare helps return a model to running condition by replacing the named upright with the same designated component type. It also suits parts storage for existing Stadium Blitzer maintenance, where keeping the correct front right spare on hand can shorten downtime between repair and the next run  Warning! Not suitable for children under 14 years.

Stadium Blitzer Right Upright, spare part
TA-01/DF-01 Front Upright Red, spare part

Axes & drive shafts

TA-01/DF-01 Front Upright Red, spare part

300050648

soon available again

The TA-01/DF-01 Front Upright Red set supplies 2 front steering knuckles for model vehicle maintenance on all DF-01 and TA-01 chassis. Each molded part is shaped for the front end, with a large central opening and several connection points that support the upright's role within the steering and wheel assembly. The red finish also makes the pair easy to spot on the workbench when parts are sorted for a rebuild or replacement job. This spare part is aimed at keeping an existing chassis running with the correct front-end hardware rather than adapting it with guessed alternatives. The paired format covers both sides of the front axle in one pack, which helps when wear, damage or a colour change calls for a matched left-right setup. The mounting holes and arm sections are formed directly into each upright, so the surrounding steering linkage can be connected in the intended positions. That makes the set useful for routine servicing, restoration of an older chassis or preparation of a fresh rolling build based on DF-01 or TA-01 components. On the bench, the 2-piece set suits quick replacement work when the front suspension and steering area is already apart. In a longer rebuild, the red uprights also add a clear visual accent that stands out against neighbouring chassis parts while keeping compatibility focused on the specified DF-01 and TA-01 platforms.  Warning! Not suitable for children under 14 years.

TA-01/DF-01 Front Upright Red, spare part
TA-01/DF-01/02 King Pin Lightweight (4), RC spare part

Axes & drive shafts

TA-01/DF-01/02 King Pin Lightweight (4), RC spare part

300053141

soon available again

The TA-01/DF-01/02 King Pin Lightweight (4) is a focused RC spare part set for steering and suspension maintenance on compatible chassis. With 4 matching knuckle bolts in a lightweight specification, the set supports clean replacement work where precise hardware fit matters and small differences in fastening parts affect how the assembly comes together. Each piece is a compact metal fastener with a threaded end, a smooth shaft section and a hex head, shaped for use in the knuckle area. That geometry supports accurate positioning during rebuilds and helps keep service work consistent across matching corners of the chassis. The set is supplied as 4 identical parts, which suits planned maintenance, repair after wear, or keeping spare hardware ready in the workshop. Compatibility is stated for G6-01, G6-01TR, GF-01, GF-01TR, GF-01CB, TT-02B, WR-02 and WR-02CB chassis. On the bench, this kind of dedicated hardware helps streamline rebuild sessions because the fit is tied to named chassis families rather than a generic screw assortment. It works well for replacing lost or worn steering fasteners during routine servicing, suspension refreshes or parts-bin restocking for frequently used RC platforms.  Warning! Not suitable for children under 14 years.

TA-01/DF-01/02 King Pin Lightweight (4), RC spare part
TA-03 C-Parts Steering Arm C-Holder for TA-03F

Axes & drive shafts

TA-03 C-Parts Steering Arm C-Holder for TA-03F

300050700

soon available again

The TA-03 C-Parts Steering Arm C-Holder set is a dedicated spare parts pack for TA-03F and TA-03R chassis, focused on the steering and upright area where accurate fit matters most. The set delivers moulded replacement parts in black resin, making it a practical choice when worn, damaged or missing front-end components need to be brought back into service. The scope of delivery contains 1x C parts sprue with 14 pieces. Within that sprue are the shaped elements used around the steering arm and C-holder assembly, along with smaller related pieces that belong to the same moulded set. Keeping these parts together on one sprue helps match the original component shapes used on the chassis. The moulded format also supports clean parts selection during maintenance, whether the work involves replacing a single damaged section or refreshing several linked mounting points at once. On the bench, this set suits routine repair, careful restoration of an older TA-03 platform, or stocking essential spares for regular running sessions. It fits naturally into RC workshop use where chassis-specific parts save time and reduce guesswork during rebuilds. For compatible installation, the set is intended for TA-03F and TA-03R chassis.  Warning! Not suitable for children under 14 years.

TA-03 C-Parts Steering Arm C-Holder for TA-03F
TA-03 G-Parts Gear-Set M0.6, chassis spare part

Axes & drive shafts

TA-03 G-Parts Gear-Set M0.6, chassis spare part

300050718

soon available again

The TA-03 G-Parts Gear-Set M0.6 is a dedicated spare part set for the TA-03 chassis, built around the exact platform reference needed for targeted transmission maintenance. The set supplies G-parts with an M0.6 gear specification, giving a clear match point when an existing drivetrain section needs replacement. Within workshop use, the TA-03 designation matters because it keeps parts selection tied to the intended chassis instead of relying on visual comparison alone. The included quantity is 1 G-Parts set with 6 pieces, which provides a defined contents count for service planning and parts checks before installation. The gear-set format also makes this a focused option for restoring the relevant transmission area rather than sourcing unrelated components. On the bench, this kind of chassis-specific spare part helps keep repair work orderly when a TA-03 build needs the correct G-section components back in place. It suits routine maintenance, replacement after wear, or completing a stored chassis with the proper M0.6 transmission parts ready for fitting.  Warning! Not suitable for children under 14 years.

TA-03 G-Parts Gear-Set M0.6, chassis spare part
TA-04/TA-05 King Pin Set, RC spare part, 4-piece

Axes & drive shafts

TA-04/TA-05 King Pin Set, RC spare part, 4-piece

300050882

soon available again

The TA-04/TA-05 King Pin Set supplies 4 shaft screws for steering knuckle use, giving RC model maintenance a precise replacement set for a small but essential chassis connection. The metal screw format combines a cylindrical head, a smooth shoulder section and a threaded end, matching the kind of hardware used where controlled movement and secure fastening need to work together. This set is listed for TA-04 and TA-05 and is also specified for DF-03, M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO and MF-01X chassis. That broad compatibility helps when servicing several platforms from the same workshop stock. With 4 matching pieces in the pack, each screw shares the same form for consistent replacement across the intended mounting points. As a dedicated spare part rather than a generic fastener, the set is aimed at repair, upkeep and parts renewal on named chassis families. In workshop use, the screws can be kept with chassis-specific spares for routine rebuilds, steering knuckle service or the replacement of lost hardware after track sessions. The compact 4-piece format also suits tackle boxes and bench drawers where clearly assigned replacement parts save time during maintenance.  Warning! Not suitable for children under 14 years.

TA-04/TA-05 King Pin Set, RC spare part, 4-piece
TB-03 Module Spur Gear 96T RC Drivetrain Part

Gears & motor pinions

TB-03 Module Spur Gear 96T RC Drivetrain Part

300054055

soon available again

The TB-03 Module Spur Gear 96T is a dedicated RC drivetrain part for standard spur gear applications across a wide group of Tamiya chassis. Its 96-tooth layout supports gear ratio setup in combination with a pinion gear, making it a practical choice when a build calls for a specific transmission balance and clean meshing. The gear is specified for high efficiency, low drive losses and low noise, so power can move through the drivetrain with less wasted motion at the spur stage. The moulded design uses a large centre opening and multiple lightening holes around the gear face, reducing unnecessary mass while keeping the toothed outer ring ready for transmission duty. As a single main gear, it suits maintenance work, replacement of worn parts and gearing changes within an existing chassis setup. Compatibility is stated for F104PRO II, F104Ver.II PRO, F104W, F104, TB-03, TB-03 VDS, TB-04, TB-05, TRF103, TRF102 and TRF101 chassis. In workshop use, the gear fits naturally into rebuilds, race-day spares boxes and planned ratio changes where a 96T spur is the required specification. The scope of delivery contains 1 main gear.  Warning! Not suitable for children under 14 years.

TB-03 Module Spur Gear 96T RC Drivetrain Part
TL01 Speed-Tuned Gear Set, RC gearbox upgrade

Gears & motor pinions

TL01 Speed-Tuned Gear Set, RC gearbox upgrade

300053342

soon available again

The TL01 Speed-Tuned Gear Set changes the character of a TL-01 drivetrain with a replacement 47T spur gear and 29T counter gear. Installed in place of the normal transmission gears, this hop-up option shifts the final drive toward higher speed and gives the chassis a sharper, faster-running setup on the track. The ratio change is clearly defined across 3 pinion choices. With a 19T pinion, the ratio moves from 7.96 to 5.95; with 21T, from 7.20 to 5.39; and with 23T, from 6.57 to 4.92. The technical guide also shows grease application points during assembly, helping the gear teeth mesh correctly inside the gearbox case. Bearings and a hollow carbon gear shaft are shown as available separately, and their use is noted for reducing burden on the motor during running. Scope of delivery: 1x Speed Gear. This upgrade suits TL-01 builds that are being tuned beyond the standard transmission layout. In workshop use, the gear swap gives builders a direct mechanical change to experiment with, while on-road running highlights the effect through a more speed-oriented drive setup.  Warning! Not suitable for children under 14 years.

TL01 Speed-Tuned Gear Set, RC gearbox upgrade
TRF 1050 Bearing Thick 3mm, ball bearings

Gears & motor pinions

TRF 1050 Bearing Thick 3mm, ball bearings

300042220

soon available again

The TRF 1050 Bearing Thick 3mm is a focused tuning and replacement part for touring car chassis that use a reversible suspension system with Double-Cardan drive shafts. Each bearing measures 5 x 10 mm with a 3 mm width, and the set contains 2 ball bearings for the positions that need this narrower format. Its key difference is the reduced width compared with the usual 5 x 10 x 4 mm bearing used in these layouts. That 1 mm change gives the Double-Cardan swing shaft more running clearance at the inside of the hub carrier, which is the exact area named for installation. This makes the bearing useful when a chassis setup calls for extra space around the shaft rather than the standard bearing thickness. The pair is intended only for the front or rear inside portion of the hub carrier, keeping the application specific and technically clear. Compatibility information covers numerous chassis families, including TA07 MS, TA06 MS, FF-04 EVO, TB-Evo.6, TB-Evo.7, TC-01, TRF419, TRF419X, TRF419XR, TT-02 TYPE-SR, TA07 PRO, TA08 PRO, FF-03, TB-03, TB-04, MF-01X, M-05, M-06, M-07 CONCEPT, M-08 CONCEPT, TT-02 TYPE-S and TRF420X, with some applications requiring specified companion parts.

TRF 1050 Bearing Thick 3mm, ball bearings
TRF Cross Joint for D-Kardan, spare parts set

Axes & drive shafts

TRF Cross Joint for D-Kardan, spare parts set

300042221

soon available again

The TRF Cross Joint for D-Kardan is a spare parts set for Double Cardan Universal shafts, built to restore the small drivetrain parts that wear through repeated running. By replacing the cross star promptly, compatible chassis can maintain the precise movement needed at the shaft assembly, especially where smooth transfer through the drivetrain matters during regular use. The set contains 4 cross joints, 4 axle rings and 4 shafts for service work on the Double Cardan Universal assembly. Compatibility spans a broad group of chassis named in the data, including TA07 MS, TA07 MSX, TA06 MS, FF-04 EVO, TB-Evo.6, TB-Evo.7, TRF419, TRF419X, TRF419XR, TRF420 and TRF420X. Further listed fits include TA07 PRO, TA08 PRO, TA06, TA06 PRO, FF-03, FF-03 PRO, TB-03, TB-03 VDS, TB-04, TB-04 PRO and TB-05 PRO, with certain applications specified for use with 42216, 42300, 42312, 42218, 42219, 42220 or 42239. This kind of replacement set suits routine workshop maintenance, rebuilds after heavy track sessions and keeping compatible chassis ready with matching service parts on hand. The compact hardware format also makes it practical to store alongside drivetrain spares for quick swaps when a worn cross joint starts to affect running feel.

TRF Cross Joint for D-Kardan, spare parts set
TRF Joint Case for D-Cardan, model spare parts

Axes & drive shafts

TRF Joint Case for D-Cardan, model spare parts

300042219

soon available again

The TRF Joint Case for D-Cardan is a dedicated spare parts set for model drivetrain maintenance, supplied as 2 matching joint cases. The cylindrical metal pieces are shaped for the specific geometry of a D-Cardan assembly, with drilled side holes and ring grooves near both ends visible on each part. Their compact machined form supports accurate placement at the intended connection point, where the case shape matters for fit and movement within the surrounding mechanical setup. As replacement components rather than general workshop hardware, they are suited to restoring the original layout of a worn or damaged assembly. The 2-piece format also provides the matching pair needed when both sides of the mechanism use the same part. In workshop use, these spare parts fit naturally into routine servicing, rebuilds, or targeted repairs on an existing model. They are especially useful when a drivetrain is being refreshed after wear, or when a D-Cardan system needs the correct case geometry to return a mechanical assembly to proper operating condition.  Warning! Not suitable for children under 14 years.

TRF Joint Case for D-Cardan, model spare parts
TRF416 Front Upright, RC spare part for chassis

Axes & drive shafts

TRF416 Front Upright, RC spare part for chassis

300051332

soon available again

The TRF416 C Parts Front Upright set supplies 2 replacement parts for the front end of selected Tamiya chassis, with each molded piece formed around a large circular hub opening and several mounting holes for the surrounding running gear. This layout supports a clean swap when the original upright has taken wear or impact damage and the steering assembly needs the correct part shape again. The set is intended for a broad range of on-road platforms, covering FF-04 EVO, FF-03, FF-03 PRO, TA07 MS, TA07 PRO, TA06 MS, TA06, TA06 PRO, TA05 ver.II, TB-Evo.7, TB-Evo.6 MS, TB-Evo.6, TB-05 PRO, TB-04, TB-04 PRO, TB-03, TB-03 VDS, TRF419XR, TRF419X, TRF419, and TT-02 TYPE-S. The paired format suits left and right front positions, and the molded construction keeps the mounting points and hub area consistent with the original chassis design. For workshop upkeep, that means less guesswork when replacing a damaged corner and restoring the front suspension layout. Kept in a pit box or parts drawer, these uprights are useful for routine servicing before club racing, for rebuilding a stored chassis, or for replacing a stressed front corner after contact on an indoor or outdoor track. The compact 2-piece set focuses on one critical front-end component rather than a mixed hardware assortment, making it easier to match the needed part to the repair.

TRF416 Front Upright, RC spare part for chassis
TRF420 D-Parts Sus Arms, chassis spare parts

Axes & drive shafts

TRF420 D-Parts Sus Arms, chassis spare parts

300051639

soon available again

The TRF420 D-Parts Sus Arms are spare suspension arm parts developed for the TRF420 racing chassis kit. The set contains 2 molded parts, shaped for suspension duty and built in carbon fiber-reinforced material to give the arm structure a rigid base where the chassis loads the suspension through corners, braking and acceleration. A revised damper mounting design uses aluminum inserts at the attachment point. By fitting different inserts, sold separately, the lever ratio can be changed across 3 different setups, which adds a clear tuning function to the replacement parts rather than limiting them to like-for-like maintenance. The rear arm layout also carries a 3 mm offset to the rear. That geometry allows use of the shorter TRF420 lower deck while keeping the same wheelbase, and it is specified to increase rear traction. These parts are intended for use with 3 mm diameter shafts. Compatibility is stated for TRF420, and also for TRF419, TA07 and TB-05 PRO chassis cars, with a note that the rear arm offset differs from standard kit parts on the marked chassis and wheelbase adjustment with spacers is required. This makes the set relevant both for TRF420 upkeep and for chassis tuning work across compatible platforms.

TRF420 D-Parts Sus Arms, chassis spare parts
TT01,TGS Toe-in Rear Upright, chassis part

Axes & drive shafts

TT01,TGS Toe-in Rear Upright, chassis part

300053673

soon available again

The TT01,TGS Toe-in Rear Upright is a chassis spare and tuning part for selected TT-01 platforms, adding 2 degrees of rear toe-in through the shape of the molded uprights themselves. Fitted to the rear assembly, the pair changes wheel alignment at the hub carrier position and gives the chassis a clearly defined geometry update. Compatibility is stated for TT-01 Type-E, TT-01 Type-ES and TT-01D Type-E. The scope of delivery contains 2 parts, covering the rear left and rear right positions as a matched set. Each piece has a molded body with a central cylindrical opening, side mounting arms and visible reinforcing ribs, all shaped for installation at the corresponding mounting points in the chassis. This makes the set suitable for replacing used uprights during maintenance or for introducing a specific rear setup on a rebuild. On a workshop bench, during a refresh of a running chassis or while preparing a second configuration, the pair gives model builders a straightforward way to change rear alignment with a dedicated component rather than improvised modification. The compact format also makes the set practical to keep with spares for TT-01 servicing and parts sorting.  Warning! Not suitable for children under 14 years.

TT01,TGS Toe-in Rear Upright, chassis part
Wheel Axle (2), RC spare part, 35 mm metal

Axes & drive shafts

Wheel Axle (2), RC spare part, 35 mm metal

300050823

soon available again

This spare parts set supplies 2 metal wheel axles for compatible RC chassis, with each axle measuring 35 mm. The specified length gives a clear reference for repair, replacement and parts matching when worn or damaged running gear needs the correct component. Compatibility is stated for TT-01R, DF03, TNS and TL01 chassis, making the set a direct choice for those platforms rather than a general axle with unspecified fit. The metal construction suits a mechanical role where the axle connects wheel-related hardware inside the chassis assembly. The pair format supports side-by-side replacement when both matching parts are changed together. The source data also notes further chassis references including DF-03, DT-02, M-06, M-06 PRO, M-05 ver.II PRO, M-05 and M-05 PRO, while XB models are excluded. In workshop use, a defined 35 mm axle length helps when checking an existing build against the replacement part before installation. For routine servicing, rebuilds or wear-related swaps on supported RC cars, this 2-piece set keeps the focus on the exact axle type needed for the stated chassis families.  Warning! Not suitable for children under 14 years.

Wheel Axle (2), RC spare part, 35 mm metal
XV-02/TRF Axle Shaft, model accessory, D-Cardan

Axes & drive shafts

XV-02/TRF Axle Shaft, model accessory, D-Cardan

300042218

soon available again

The XV-02/TRF Axle Shaft for D-Cardan is a dedicated model accessory for RC vehicle maintenance, supplied as a 2-piece set for the specified drivetrain layout. Each shaft is shaped for the XV-02/TRF platform and the D-Cardan system, giving builders a direct route to replacing worn running gear parts with the correct component type. The close-coupled shaft design points to a mechanical role where accurate fit and clean movement matter inside the drivetrain. The parts shown feature a metal body, a threaded end section, a side hole in the shaft body and a pivoting joint-style end, all of which indicate a component made for mounted, moving connections rather than general hardware use. That makes this set relevant for repair work, scheduled maintenance or keeping a chassis configuration consistent after heavy running sessions. On the bench, a matched pair helps keep left and right side service work aligned when the D-Cardan assembly needs attention. In an RC workshop setup, this kind of specific spare part supports faster parts selection, cleaner rebuild planning and a more exact return to the intended XV-02/TRF specification.  Warning! Not suitable for children under 14 years.

XV-02/TRF Axle Shaft, model accessory, D-Cardan
DB-01/TRF501X Pinion Gear 18/19T 48DP

Gears & motor pinions

DB-01/TRF501X Pinion Gear 18/19T 48DP

300053965

only available from customer service

Article number: 300053965 Product: DB-01/TRF501X Pinion Gear 18/19T 48DP These pinion gears are for use with 48 pitch spur gears. Choose the right one to get your model perfectly setup for the track! Gear ratios (with 96T spur gear) = 12.00:1 (18T), 11.37:1 (19T). Scope of delivery: 1x Motor Pinion Set (6 pieces)   Warning! Not suitable for children under 14 years.

DB-01/TRF501X Pinion Gear 18/19T 48DP
DB-01/TRF501X Pinion Gear 20/21T 48DP

Gears & motor pinions

DB-01/TRF501X Pinion Gear 20/21T 48DP

300053966

only available from customer service

Article number: 300053966 Product: DB-01/TRF501X Pinion Gear 20/21T 48DP ★These pinion gears are for use with 48 pitch spur gears. ★Choose the right one to get your model perfectly setup for the track! ★Gear ratios (with 96T spur gear) = 10.80:1 (20T), 10.29:1 (21T). Compatible Chassis DB01, DB02, DN-01, TRF201, TRF502X & TRF503 Chassis   Warning! Not suitable for children under 14 years.

DB-01/TRF501X Pinion Gear 20/21T 48DP
DB-01/TRF501X Pinion Gear 22/23T 48DP

Gears & motor pinions

DB-01/TRF501X Pinion Gear 22/23T 48DP

300054217

only available from customer service

Article number: 300054217 Product: DB-01/TRF501X Pinion Gear 22/23T 48DP These 48 Pitch Pinion Gears feature newly designed teeth to reduce both noise and friction loss. Each pinion gear features two grub screw attachment holes to allow you to choose the best attachment position.   Warning! Not suitable for children under 14 years.

DB-01/TRF501X Pinion Gear 22/23T 48DP
DF-03 Hard Turnbuckle Shaft Set, chassis accessory

Axes & drive shafts

DF-03 Hard Turnbuckle Shaft Set, chassis accessory

300053940

available in stores

The DF-03 Hard Turnbuckle Shaft Set is a chassis-specific accessory for model vehicle maintenance and setup work. Made for the DF-03 platform, it provides the exact shaft lengths used at two key linkage areas, so replacement and tuning can stay consistent with the original chassis layout. The set combines 6 hard turnbuckle shafts in 2 sizes. Four shafts measure 3 x 50 mm and are intended for the camber links, while 2 shafts measure 3 x 46 mm and are intended for the steering. This split gives each linkage point the length assigned to its function rather than using one shared size across the chassis. The turnbuckle format supports adjustment work at the linkage itself, which is useful when restoring worn parts or refreshing a running DF-03 build with dedicated replacement hardware. On the bench, the set suits routine servicing, rebuilds after heavy use, or planned chassis updates where the camber and steering linkages need matching replacement parts. As a DF-03-compatible accessory, it fits naturally into parts storage for ongoing maintenance of that platform.  Warning! Not suitable for children under 14 years.

DF-03 Hard Turnbuckle Shaft Set, chassis accessory
Front Suspension Arms, model spare parts set

Axes & drive shafts

Front Suspension Arms, model spare parts set

310005370

available in stores

B Parts Front Suspension Arms are a dedicated spare parts set for model maintenance, centered on the front suspension area where accurate replacement matters for continued chassis use. The named B parts designation gives a clear reference for matching the correct component group to an existing assembly and supports a like-for-like exchange when the original arms need replacement. Within a running model, front suspension arms sit in a key position between the chassis structure and the wheel assembly, so replacing this specific part group helps return the front end to its intended layout. The set is suited to repair work after wear, damage or teardown, and it also fits planned rebuilds where the front section is being refreshed with the correct designated parts. Because the data identifies these as front suspension arms rather than a general hardware pack, the focus stays on one concrete mechanical area instead of unrelated maintenance pieces. This kind of spare parts set fits naturally into a bench setup for ongoing model care, whether a chassis is being checked after use or prepared for the next running session. It also works as a practical stock part for builders who keep designated replacement components on hand for future service.

Front Suspension Arms, model spare parts set
One-Piece Thrust Bearing 1150, model part

Axes & drive shafts

One-Piece Thrust Bearing 1150, model part

300053136

available in stores

The One-Piece Thrust Bearing 1150 is a compact model part for assemblies that need a bearing in 5 x 11 x 4 mm format. Its one-piece construction provides a clear, specific solution for model maintenance, replacement work and planned parts matching when the mechanism calls for this exact size. The 1150 designation helps identify the bearing during workshop sorting and repair preparation, especially when several small components are handled side by side. As a thrust bearing, it is intended for applications where axial forces need controlled support within a model mechanism. The compact dimensions suit tightly packaged layouts in detailed hobby builds, where each millimetre matters for fit and movement. Supplied as 1 bearing, it works well as a direct replacement, a service spare or a reserved part for future maintenance. On the bench, this bearing fits naturally into routine repair sessions, rebuilds and careful parts organisation. It also supports planned stocking of frequently used model components, keeping a correctly sized bearing ready for the next compatible assembly task.

One-Piece Thrust Bearing 1150, model part
Wheel Stopper Left Gr.C MB18 Model Spare Part

Axes & drive shafts

Wheel Stopper Left Gr.C MB18 Model Spare Part

313455253

available in stores

Wheel stopper left Gr.C MB18 is a dedicated model spare part for replacing a specific left-side component in a compatible assembly. The exact Gr.C MB18 designation gives a clear reference point when an existing stopper is worn, missing or needs to be matched during maintenance. Used as a targeted replacement rather than a general hardware substitute, this part helps preserve the intended layout of the original build. The left-side specification matters when a model uses mirrored components, because the correct side keeps the assembly aligned with the original parts arrangement. Its compact format also makes it practical for organised storage in parts drawers, workshop trays or labelled repair boxes, where small replacement components need to stay easy to identify. During servicing, rebuilds or parts sorting, a clearly named spare like Wheel stopper left Gr.C MB18 helps keep repair work focused on the exact section that needs attention. It suits model benches where existing assemblies are maintained over time and individual components are replaced as needed.

Wheel Stopper Left Gr.C MB18 Model Spare Part
193 of 193 Items