Body kits

1:10 Audi 90 quattro Racing, body set, WB 251mm

€47.99

This 1:10 body set brings the Audi 90 quattro Racing onto compatible touring car chassis with a clear polycarbonate shell shaped for a crisp racing silhouette and a 251 mm short wheelbase layout. The unpainted finish leaves the exterior open to a full custom paint job, from period-style race colours to a display-focused livery built around the included graphics. Separate red parts add key exterior features such as the side mirrors, rear wing and air ducts, giving the shell more depth than a single-piece body alone. Metal attachment parts are included for fitting these components to the shell. The marking sticker sheet carries the race graphics, while the masking stickers help define window areas during painting, so the finishing process can move from clear shell to detailed bodywork with cleaner edges and sharper contrast. Compatibility covers TT-01, TT-01 Type-E, TT-02 chassis excluding TT-02B and TT-02T, and BT-01 cars in the short 251 mm wheelbase format. On a matching chassis, the shell suits track sessions, shelf display or a fresh rebody for an existing touring car build where the boxy Audi racing shape and separate aero details create a distinct 1980s competition presence.

Body kits

1:10 Audi quattro Rallye A2, RC body set

€47.99

The Audi quattro Rallye A2 body set brings a classic rally silhouette to 1:10 chassis builds with a lightweight 1.0 mm polycarbonate shell shaped for road or rally use. Its 257 mm wheelbase matches the proportions shown in the body design, and the clear shell leaves full freedom for trimming, painting and final livery work. Separate detail parts expand the finish beyond the main shell. Front and rear light cases use metal-plated ABS parts, while the side mirrors, wing and wing caps are molded in white ABS for dedicated paint treatment. The light cases are compatible with separately sold LEDs, while the fog lamps are not. Marking stickers and masking stickers are included, supporting accurate window masking and the placement of the Audi rally graphics shown for the body. TT-01, TT-02 and XV-01 chassis cars are listed as compatible. On the bench, the set supports a full custom body build with trimming, drilled mounting points and paint applied from the inside of the polycarbonate shell. Once mounted, the shape suits road sessions and rally-style setups, especially on chassis adjusted for higher ground clearance. LEDs, if added separately to the compatible light cases, can extend the finished look for display or running sessions.

Body kits

1:10 Audi V8 Touring, RC body set, polycarbonate

€47.99

This 1:10 RC body set brings the 1991 Audi V8 Touring onto compatible touring car chassis with a clear polycarbonate shell that captures the car's broad stance, four-door profile and race-bred presence. Once trimmed, painted and finished, the separate body parts and included graphics turn a chassis into a period touring car replica with a strong DTM look. The shell is supplied as a body parts assembly kit, so the finishing process stays in the builder's hands from cut lines to final livery placement. Polycarbonate keeps the form light while allowing the molded details of the bumpers, roofline, wheel arches and rear wing to come through clearly after paint is applied from the inside. The sticker sheet recreates the 1991 Frank Biela No.45 car, and masking stickers help keep window sections crisp during painting. Compatibility is specified for TT-02 chassis, excluding TT-02B and TT-02T, as well as TB-04, TB-05, TA06 and TA07 cars. Fitment depends on a 257 mm wheelbase and a narrow tread setup, so this shell suits chassis builds already configured to those dimensions. On the bench, that makes it a strong option for restoring a worn body, building a second race livery, or giving an existing touring car chassis a distinctly early-1990s competition look.

Body kits

1:10 Castrol Honda Civic VTi, RC body set

€46.49

The Castrol Honda Civic VTi RC body set brings touring car shape and period racing graphics into a re-release shell made for 1:10 on-road builds. The clear polycarbonate body gives full control over trimming, internal paintwork and final livery placement, so the finished car can carry the low, compact stance of the original hatchback racer on the chassis underneath. This set includes the body shell, side mirrors, a sticker sheet and window masks. The shell is designed around a 257 mm wheelbase and is described as a fit for the FF-03 chassis, while the stated compatibility list also names FF-04 EVO, FF-03 PRO, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. Mounting preparation involves trimming the shell and making body mount and antenna holes where needed. The separate mirror parts secure from inside the body, adding a more complete touring car silhouette once painted and installed. On the bench, the clear shell supports a step-by-step finishing process with masking, paint separation and decal placement all working together. In a completed 1:10 chassis build, the Castrol Honda Civic VTi shape gives club-style on-road cars a recognisable 1990s saloon racing look whether the focus is running sessions or shelf display.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Celica GT-Four ST165, body set, WB257mm

€38.99

This 1:10 body set brings the Toyota Celica GT-Four ST165 into touring car form with a clear polycarbonate shell shaped around the coupe's low nose, defined fenders and rear spoiler. The 1.0 mm thickness keeps the shell light while giving the painted body a crisp base for motorsport graphics and window framing. The set contains the clear bodyshell, marking stickers, masking stickers and metal attachment parts. The masking sheet helps cover selected areas during painting, while the marking sheet adds the race-inspired Celica graphics shown by the body design. Molded details for the grille, windows, wheel arches and side sections give the shell more visual depth once trimmed, painted and mounted. The body is intended for 1:10 touring car use and matches chassis with a 257 mm wheelbase. Compatibility is specified for TT-01 Type-E and TT-02 chassis cars, excluding TT-02B, TT-02T and TT-02FT. A narrow rear tread setup is required, so this shell suits builds configured around that fitment. On the bench, the clear finish leaves full control over color layout and livery placement; on the chassis, the ST165 profile gives the model a classic rally-era presence.

Body kits

1:10 Lancia Delta HF Integrale, RC body set

€59.99

This 1:10 RC body set brings the Lancia Delta HF Integrale into a clear polycarbonate shell shaped for a sharp, competition-style silhouette. The transparent body gives full control over the finish, so the shell can be trimmed, painted from the inside and detailed to match the car's distinctive rally look. The set comes with a sticker sheet, masking seals and separately reproduced detail parts, giving the shell more than a single-piece appearance once completed. Metal plated H parts recreate the front grille, while J parts provide the spoiler and mirror components in separate pieces. The body is designed for a 257 mm wheelbase and can be used with TT-02, TT-02D, TT-02RR, TT-01 TYPE-E, TT-01D TYPE-E and XV-02PRO chassis. On XV-02PRO, the antenna hole position is changed to suit the chassis layout. For TT-01 series use, short wheelbase versions are excluded, and chassis with rear wide tread need conversion to narrow tread. In the workshop, the shell supports a classic RC finishing routine of cutting, drilling, masking and paint application before the graphics are added. Once mounted, the separate grille and spoiler details help the body stand out on rally-style builds, whether the focus is shelf presentation, club running or a period-inspired chassis project.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Lotus Europa Special, RC body kit

€41.99

This 1:10 RC body parts assembly kit brings the Lotus Europa Special onto compatible M-chassis cars with a sharply profiled coupe shape and a lightweight polycarbonate shell. The low roofline, long rear section and compact proportions give the finished build a distinct road-car silhouette that stands out on the bench and on the track. The bodyshell arrives clear for trimming, painting and detailing, so the exterior finish can be built step by step around the chosen color scheme. Separate ABS resin parts add dimension to key areas of the car, with side mirrors, light cases and a rear wing supplied as individual components rather than molded into the shell surface. Marking stickers provide the model-specific exterior graphics, while masking stickers support cleaner paint separation around window areas and other defined sections. The shell is intended for M-06 and M-08 chassis cars in the 225 mm medium wheelbase format, which makes the fit target clear when planning a body change or a fresh build. On a workbench, the clear shell, separate detail parts and sticker sheets create a focused finishing project with visible progress at each stage. Once mounted on a compatible chassis, the Lotus Europa Special shape gives club running, shelf display and body customization sessions a classic sports-car look with crisp scale character.

Body kits

1:10 Mazda MX-5, body set, polycarbonate shell

€36.99

This 1:10 body set brings the 2015 Mazda MX-5 into RC form with a clear polycarbonate shell shaped around the compact roadster's low bonnet, short rear deck and crisp lamp outlines. The 1 mm material gives the shell the flexibility expected for RC use while leaving the surface ready for custom paint and decal work. The set is supplied as a body kit with masking seals for the windows, a sticker sheet and separate side mirror parts. Markings cover Japan, U.S. and rest-of-the-world versions, so the finished car can follow different regional MX-5 and Roadster identities shown in the set. The shell is designed for a 225 mm wheelbase and measures 378 mm long by 169 mm wide, which places it squarely in the compact M-chassis format. Trimming and body-post hole preparation are part of the build, and the clear shell format leaves full control over colour choice, window tint and exterior detailing. Mounted on a compatible chassis, the finished body gives club running, shelf display or a fresh rebody project the look of a modern lightweight sports car. It also suits builders refreshing an existing M-platform car with a new shell that combines licensed Mazda styling, detailed mirrors and region-specific finishing options.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Motul Autech Z 2023, RC body set, WB257

€46.99

The Motul Autech Z 2023 body set brings Super GT character to 1:10 touring car chassis with a clear polycarbonate shell shaped around the car's low nose, flared arches and pronounced aero surfaces. Its 257 mm wheelbase format suits standard touring car proportions and leaves the finish open to a full custom paint scheme. Beyond the main shell, the set uses separate parts to build up the final look with more depth. Front and rear light cases are molded in polycarbonate, while the side mirrors and large rear wing come in black ABS for stronger visual contrast once mounted. Canards sharpen the front end further, and the included masking stickers help keep window sections transparent during painting. Marking stickers provide the race livery details, and metal attachment parts are supplied for fitting the assembled shell to a compatible chassis. LEDs are not attachable to the light cases. Compatibility covers TT-01, TT-01 Type-E, TT-02 excluding TT-02B and TT-02T, TC-01, TA06, TA07, TA08 and TB-05 chassis cars. Short wheelbase chassis cannot be used, and wide tread rear chassis require conversion to narrow tread before mounting. On the bench, the clear shell, separate aero parts and livery sheet support a detailed finish; on a completed chassis, the body gives touring car builds a focused modern GT presence.  Warning! Not suitable for children under 14 years.

Body kits

1:10 NiSMO R34 GT-R Z-Tuned, RC body set

€56.99

This 1:10 NiSMO R34 GT-R Z-Tuned Street RC body set brings the sharp proportions of the tuned R34 to a clear polycarbonate shell made for custom finishing. The unpainted body arrives ready for trimming, drilling and paintwork, so the final look can follow a clean street style or a more track-focused interpretation built around the same Z-Tuned form. Separate molded parts add exterior definition around areas such as the mirrors and rear wing, while the included sticker and masking material helps organize the finishing stages with more control. The instruction data specifies front and rear body mount holes at 6 to 6.5 mm, a 6 mm antenna hole, plus additional 4 mm and 4.5 mm openings in marked positions. Paint callouts in the guide identify black detail sections and silver body areas, and the shell also provides marked locations for optional LED light installation with 3 mm and 5 mm light units. On the bench, the clear shell supports a methodical build sequence: wash, mask, trim, drill and paint from the inside before applying the exterior markings. Once mounted, the long compatibility list makes this body a strong choice for refreshing an existing touring chassis or building a new R34-based setup around platforms such as TA07, TB-05 PRO or TRF419, with TRF420 and TA08 PRO usable when total width stays at 186 mm or less.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Peugeot 306 Maxi, body set, WB 257 mm

€44.99

This 1:10 body set brings the Peugeot 306 Maxi to BT-01 long wheelbase builds with a clear polycarbonate shell shaped around the car's compact rally form. The transparent bodyshell arrives ready for painting, so the molded grille, lamp outlines, door lines and wheel arch contours can be finished in a scheme that suits the build. Separate parts recreate the side mirrors and rear wing, adding exterior pieces that stand proud of the main shell instead of being left as flat surface detail. Marking stickers supply the Peugeot 306 Maxi graphics, while masking stickers help cover window areas during the paint job for cleaner edges and a more defined final result. Metal attachment parts are included for mounting these detail components. The set is intended for 1:10 touring car use and matches BT-01 chassis cars in the long wheelbase 257 mm format. On the bench, the clear shell, masks and livery sheet support a step-by-step finishing process from paint preparation to final decals. Once mounted on a compatible chassis, the compact hatchback profile, rear wing and rally markings give the car a motorsport look that stands out during running sessions or as part of a finished collection.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Porsche 911 Carrera RSR, RC body set

€51.49

This 1:10 Porsche 911 Carrera RSR body set brings the wide-arched silhouette and rear wing of the classic race car to short wheelbase touring chassis. The clear polycarbonate shell is molded in 1 mm thickness, giving builders a lightweight base for a custom painted finish and race-inspired detailing. The set is supplied as body parts rather than a complete car, with the shell prepared for trimming, drilling and paintwork to match the chosen chassis layout. A separate black ABS side mirror adds a distinct exterior detail instead of leaving that feature molded into the clear shell. The included markings reproduce the well-known Carrera RSR Team appearance with Martini stripes, number graphics and sponsor-style details across the body. Window masking seals are also included, supporting sharper paint lines around the glazing areas during finishing. The body features a 251 mm wheelbase and is intended for short wheelbase applications. Compatibility covers TT-01, TT-01 Type-E and TT-02 chassis in short wheelbase form, making the shell a focused choice for builders updating an existing touring car platform or planning a period racing look. On the bench, the clear shell, separate detail part and full decal set leave room for an individual paint approach while staying true to the classic endurance-racing character of the Porsche 911 Carrera RSR.

Body kits

1:10 Porsche 911 GT3 (992), RC body set

€39.99

This 1:10 RC body set brings the shape of the Porsche 911 GT3 (992) to compatible touring car chassis with a lightweight polycarbonate shell that is ready for cutting, painting and detailing. The separate rear wing and front light cases give the finished body more depth, whether it is being prepared for track use or built as a display-focused shell between running sessions. The set contains a clear polycarbonate body part set, marking stickers and masking stickers for painting. Black molded parts recreate the side mirrors and wing stays as separate exterior details, while metal attachment parts are supplied for mounting. The shell is compatible with TT-02, TT-01 and TT-01 Type-E chassis, excluding TT-02B and TT-02T. Fitment is limited to short 251 mm wheelbase chassis, and wide rear tread layouts need to be changed to a narrow rear tread setup. Chassis and cockpit parts are not included. On the bench, the clear shell leaves room for custom paint schemes, window masking and careful decal placement. Once mounted, the low, wide 911 silhouette, rear wing profile and detailed light areas give touring car builds a focused road-going race look.

Body kits

1:10 Raikiri GT, RC body set, polycarbonate

€48.99

The Raikiri GT body set brings a sharp, track-style silhouette to 1:10 touring car builds with a clear polycarbonate shell shaped by Znug Design, Inc. The low nose, flared arches and large rear wing create a focused racing look that stands out once the shell is cut, painted and mounted on the chassis. This body set is supplied as an unpainted shell, giving full control over colour layout and finish. Vinyl stickers are provided for the window trim, headlights, tail lights and livery markings, while window masking seals help keep painted edges clean around the glazing areas. The separate rear wing uses wing stay mounts that allow different aero setups, adding another tuning detail to the finished car. At 190 mm width and with a 257 mm wheelbase designation in the name, the shell is aimed at touring car proportions rather than off-road formats. Compatibility covers a wide span of Tamiya chassis, including TT-01, TT-02, TB-04, TA-05 and TA06 cars. Additional fitment is possible on further platforms when the overall width is 188 mm or less, with antenna and rear body mount hole positions changed according to the chassis layout. On the bench, the clear shell supports a detailed paint and decal process; on the track, the finished Raikiri GT shape gives an RC car a distinctive modern racing presence.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Snap Pin Set (10+5), body clip kit

€3.49

The Snap Pin Set (10+5) brings a straightforward fix to one of the most frequently handled parts on a model vehicle: the retaining clip. With 10 large and 5 small spring cotter pins in black metal, this body clip kit keeps key fastening points ready for repeated body removal, refitting and routine maintenance on 1:10 models. Each clip is formed from bent spring wire with a rounded loop and a double-prong end that slides through the mounting hole and holds its position mechanically. The 2 sizes suit different pin diameters within the same workshop drawer, which helps when replacing a missing clip or refreshing worn hardware on a regularly used chassis. The compact format also makes the set easy to keep with field equipment, pit storage or a home workbench where small spare parts need to stay close at hand. For bodyshell changes, cleaning sessions or quick checks between runs, the mixed clip count gives immediate access to the fastening parts that are most likely to go missing first. The set also works well as a reserve for repair boxes and maintenance cases where reusable metal retainers are needed for repeated fitting and removal.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Subaru BRZ R&D Sport 2014 Fuji, body set

€48.99

This 1:10 body set captures the Subaru BRZ R&D Sport 2014 Fuji in a clear polycarbonate shell shaped for a sharp Super GT stance. The low nose, flared arches and large rear wing give touring chassis builds a focused race-car presence, while the included markings recreate the Fuji 2014 livery with the layered sponsor and number graphics seen on the full-size machine. The shell is designed around a 257 mm wheelbase, making it suitable for a broad range of touring platforms. Beyond TT-01, TT-02, TA-05, TB-04 and TA06 chassis cars, installation is also possible on TA07 PRO, TA07 MS, TA06 PRO, TA06 MS, TB-04 PRO, TB-05 PRO and TA05 ver.II chassis when overall width is 188 mm or less. TA08 PRO and TC-01 chassis can also take the body at 188 mm or less, with the antenna hole position adjusted to suit the chassis. On TA07 MSX, TB-Evo.6, TB-Evo.6 MS, TB-Evo.7, TRF419, TRF419X, TRF419XR, TRF420 and TRF420X chassis, the antenna hole and rear body mounting hole positions are adjusted according to the chassis. Window masking stickers support paint preparation on the clear shell, and the separate light, wing and fender parts add extra depth once fitted. On the bench, the set suits detailed finishing with cut, drill and paint steps before mounting to a compatible touring car chassis for track sessions or shelf display.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Toyota Celica GT-Four RC bodyshell set

€40.99

This 1:10 bodyshell set brings the Toyota Celica GT-Four onto compatible touring chassis with a clear polycarbonate shell shaped around the coupe's rally-bred lines. Hood scoop contours, grille openings, headlight areas, window frames and pronounced wheel arches give the shell a recognisable ST185 look before paint and decals are applied. The set is supplied as a body part set for 257 mm wheelbase cars and is designed for TT-01 Type-E and TT-02 chassis platforms, with TT-02B, TT-02T and TT-02FT excluded. Marking stickers and masking stickers are included to guide the paint job and help separate window areas from the painted body sections. Metal attachment parts are also provided for mounting. The clear shell format leaves colour choice, backing coats and final livery open to the builder, while the separate detail parts add definition to the finished exterior. On the bench, the masking sheet helps organise the painting sequence before the markings go on for lights, trim and model-specific graphics. Once mounted to a compatible chassis, the finished shell suits rally-inspired road runs, club sessions or a shelf display that shows off the Celica GT-Four silhouette from every angle.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Toyota Celica GT-Four ST205, body set

€40.99

This 1:10 body set brings the shape of the Toyota Celica GT-Four ST205 to compatible touring car chassis with a clear polycarbonate shell that is ready for trimming, painting and detailing. The 1.0 mm body captures the coupe profile with defined lamp recesses, grille lines, hood scoop contours and a prominent rear wing, giving the finished car the sharp road-going stance of the original model. The set is supplied as a clear body part package for builders who want to create a custom finish rather than start with a prepainted shell. Marking stickers add model names, light graphics and trim details, while masking stickers help keep window sections and paint lines clean during the spray process. Metal parts for attachment are also included, supporting the mounting work needed before the shell goes onto the chassis. The body is made for 257 mm wheelbase cars and is compatible with TT-01 Type-E and TT-02 platforms, excluding TT-02B, TT-02T and TT-02FT. On the bench, the clear shell allows each stage of the finish to be planned around the molded panel lines and cut points. Once mounted, the low coupe shape, rear spoiler and Celica-specific detailing give touring car runs a distinct late-1990s performance look with a body style that stands out on tarmac layouts and display shelves alike.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Toyota GR 86, RC body kit, polycarbonate

€43.99

This 1:10 RC body parts assembly kit brings the Toyota GR 86 shape to compatible touring car chassis with a clear polycarbonate shell, separate light cases and a distinct low, wide silhouette that stands out once painted and trimmed. The form follows the GR 86 closely, giving on-road builds a recognisable coupe profile for display shelves, pit tables and running sessions alike. The shell is supplied unpainted, which leaves full control over colour layout, window treatment and final livery. Separate black ABS resin parts depict the side mirrors, adding a small but visible contrast once fitted to the finished body. A separate rear wing piece is also shown among the included parts, extending the body set beyond the main shell itself. Marking stickers handle the visual details, while masking stickers support clean paint separation on window areas and trim lines. The light cases are moulded into the polycarbonate body set, helping headlight and rear light areas read clearly after finishing. Compatibility covers TT-01, TT-01 TYPE-E, TT-02, TC-01, TA06, TA07, TA08 and TB-05 chassis cars, while TT-02B and TT-02T are excluded. For wide tread rear chassis, the rear setup should be changed to standard tread before fitting. That makes this body set a focused choice for builders planning a GR 86 conversion on an existing 257 mm wheelbase touring car platform.

Body kits

1:10 Toyota GR TS050 Hybrid, RC body set

€51.99

The 1:10 Toyota GR TS050 Hybrid RC body set brings modern endurance-racing shape to an F103GT chassis with a clear multi-piece polycarbonate shell and separate aero details. Its low cockpit, long tail and layered body sections give the finished car the unmistakable profile of the TS050 Hybrid as it takes shape on the bench and on the track. The set goes beyond a single shell by using individual components for the shark fin, canards, light cases, rear wing and side mirrors, so the body gains depth through added parts rather than printed surface detail alone. Trimming and mounting call for careful preparation, with marked hole positions in 2 mm, 4 mm, 4.5 mm, 6 mm and 6.5 mm sizes shown in the instructions for body posts, accessories and antenna routing where used. Sticker sheets cover the sponsor graphics and race markings, and the included masking stickers help define window and paint areas before color is applied from the inside of the polycarbonate shell. Transparent double-sided tape pieces and a metal parts bag are included for fitting selected details. On an F103GT chassis, the finished shell suits low-slung on-road running and display between sessions, with the broad fenders, central fin and rear wing giving the car a focused prototype-racer presence. Paints and tools are required separately.

Body kits

1:10 Toyota GR Yaris Hybrid Body Set, RC body

€49.99

This 1:10 Toyota GR Yaris Hybrid Body Set brings modern rally styling to compatible touring car chassis with a 1.0 mm clear polycarbonate shell shaped around the GR Yaris Rally1 Hybrid. The body lines, canards and separate front light cases give the shell a layered competition look that stands out once painted and decaled. Black molded accessory parts depict the side mirrors, side ducts, caps and the 2-piece large rear wing, adding distinct scale detail beyond the main shell. Marking stickers and masking stickers are included to support the paint process and help place the livery with clean separation between color areas. Metal attachment parts are also included for fitting the body components. The set is compatible with TT-02, TT-01, TT-01 Type-E, XV-01 and XV-02 PRO chassis. It is not compatible with TT-02B, TT-02T, wide rear tread setups or short wheelbase chassis. On a finished 1:10 touring car, the shell suits rally-inspired builds that focus on authentic bodywork and race-livery detail. Chassis and cockpit parts are not included, so the set works as a dedicated body upgrade or replacement for an existing compatible platform.

Body kits

1:10 Toyota GR Yaris, RC body set, 239mm

€37.99

This 1:10 RC body set brings the compact, racy form of the Toyota GR Yaris to compatible touring chassis with a clear polycarbonate shell shaped for a 239mm wheelbase layout. The body surface carries molded grille, lamp, door, roof and spoiler lines that give the finished car a defined road-going character once trimmed, painted and decaled. The shell is supplied as a body parts assembly kit, with separate components for the side mirrors and light cases to add extra depth around the outer edges of the car. Polycarbonate keeps the body light while allowing the detailed form to stay faithful to the full-size design. The included sticker sheet covers visual elements such as lights, window frames, grille and trim, while masking stickers help prepare paint boundaries during the finishing work. Manual guidance also shows cut lines, hole positions and mounting points for chassis installation, including body post openings and antenna routing where required by the chassis setup. Mounted on a compatible M-05, M-05 PRO, M-05 Ver.II PRO or M-07 Concept chassis car with a 239mm wheelbase, the shell suits hobby bench sessions focused on painting, detailing and final fitment. It also gives existing 1:10 runners a fresh bodyshell option for road-style driving with GR Yaris styling at the center of the build.

Body kits

1:10 Toyota Land Cruiser 300 body set, CC-02

€68.99

This 1:10 body set brings the Toyota Land Cruiser 300 onto the CC-02 platform with a clear 1.2 mm polycarbonate shell that captures the tall stance, broad grille area and clean SUV proportions of the full-size vehicle. The transparent body arrives unpainted, uncut and without pre-made body mount holes, so the shell can be trimmed and finished to match the chosen setup on an L-size 267 mm wheelbase chassis. The set goes beyond the main shell with separate detail parts that shape the finished exterior. Metal-plated H parts depict the door mirrors, light cases and front grille sections, while pearl white K parts add the door handles and the shark fin antenna on the roof. Marking stickers and masking stickers are included for the paint job, and metal attachment parts are also supplied for fitting the components. The dedicated body parts set is intended for compatibility with the CC-02 chassis in L-size wheelbase form. On the bench, the clear shell gives direct access to custom paintwork, window masking and trim placement before the body is mounted over the running chassis. Once assembled, the combination of plated trim parts, pearl white accents and model-specific stickers gives the Land Cruiser 300 shape a finished scale presence suited to trail-style RC builds and display between runs.

Body kits

1:10 VW Karmann Ghia, RC body set, 239mm

€39.99

This 1:10 R/C body parts assembly kit brings the classic VW Karmann Ghia shape to custom chassis builds with a lightweight polycarbonate shell and finely molded exterior lines. Rounded fenders, window outlines, hood contours and door details give the coupe its distinctive profile before paint and final detailing are applied. The set is built around body preparation and finishing rather than a complete running car. Separate plated parts depict the side mirror, bumpers and light cases, so key trim areas stand out against the painted shell. Marking stickers add badges, light graphics and exterior accents, while masking stickers help define painted sections with cleaner edges. The body requires a 239 mm wheelbase for fitment. Manual preparation steps shown in the supplied documentation include trimming the shell, making body mount holes and preparing the surface before painting. On a compatible chassis, the shell suits retro road car conversions, period-inspired display builds and detailed repaint projects. The clear body format leaves room for individual color schemes and finishing choices, whether the goal is a clean street look, chrome-accented classic styling or a carefully decaled scale replica.

Body kits

6mm Snap Pin, model accessory, pack of 15

€3.69

This 6 mm snap pin set adds a small but essential fastening part to the workshop bench, with 15 matching clips supplied for model maintenance, replacement work and general spares. The bent wire shape is designed to slide over a pin or axle and hold the connection in place, giving mechanical assemblies a simple retaining method that can also be removed again when access is needed. Each clip uses a rounded loop at one end, a straight leg and a spring-shaped upper section that creates the holding action once fitted. That shape makes the set useful wherever a model requires this style of retainer rather than a threaded fastener or permanent fixing. The included quantity supports repeated service jobs across more than one build, and the matching 6 mm size keeps the pack consistent when a specific fit is required. Included: 15x cotter pins. On the workbench, these spare clips help keep running gear, linkages or similar pinned connections secured after cleaning, part swaps or routine wear replacement. They also make practical stock for builders who prefer to keep commonly used fastening hardware ready alongside other workshop essentials.  Warning! Not suitable for children under 14 years.

Body kits

7mm Body Snap Pin Set, model accessory, 10 pieces

€4.79

This set supplies 10 large body snap pins in a 7 mm size for model and RC maintenance where removable fastening is part of regular use. The bent metal wire shape combines a rounded loop at the top with 2 angled legs, creating a simple retaining clip that can be inserted through a mounting hole and removed again by hand when access is needed. Used as body retainers, these pins help hold attached sections in place while keeping the connection easy to release for battery access, chassis checks or bodyshell changes, where the compatible model uses this format. The black metal finish keeps the set visually uniform across all 10 pieces. Because the pack contains matching clips rather than mixed hardware, it supports consistent replacement when original retainers are lost, worn or set aside during maintenance. The compact format also makes the set practical for tool cases, pit boxes or spare-parts drawers. On the bench, the 7 mm pins suit routine rebuilds and shell swaps that call for quick removal and refitting instead of permanent fixing. During running sessions or display preparation, keeping identical spare retainers close at hand helps avoid interruptions when a fastening clip is missing.  Warning! Not suitable for children under 14 years.

Body kits

Alfa Romeo Giulia Sprint GTA body set, MB-01

€35.99

This clear polycarbonate body set brings the Alfa Romeo Giulia Sprint GTA Club Racer shape to MB-01 chassis cars with the lean proportions and classic coupe lines of the original racer. The lightweight shell is formed in transparent polycarbonate, ready for painting and finishing to suit a detailed M-Chassis build with a 225 mm wheelbase. The set contains more than the main shell alone. Sticker and masking sticker sheets are supplied to support the paint job and to add the club racer inspired graphics after painting, while metal attachment parts are provided for fitting. The included design elements are based on the look of club racers run by amateur drivers, giving the finished car period-style number circles, striping and trim details. Compatibility is specified for MB-01 chassis cars, so the shell is intended for that platform rather than a universal fit. On the bench, the clear shell allows the body lines, window areas and trim sections to be prepared before color is applied. Once mounted on a compatible chassis, the finished Giulia Sprint GTA body gives an RC car a distinct vintage competition character suited to display between runs and to driving sessions where classic motorsport styling is part of the appeal.  Warning! Not suitable for children under 14 years.

Body kits

Alfa Romeo Giulia Sprint RC bodyshell 225 mm

€32.99

This RC bodyshell brings the Alfa Romeo Giulia Sprint into a 225 mm wheelbase format with a clear polycarbonate shell shaped for hobby finishing and mounting. The transparent form shows the full sedan profile before paint, with molded panel lines across the bonnet, roof, doors and rear section that help separate trim details and body contours during the finishing process. The shell is supplied unpainted, leaving room for custom liveries, period road-car colours or race-inspired schemes matched to a chosen chassis build. Wheel arch openings and the lower flange indicate where trimming is required, while the molded surface details provide visual reference for window frames, side trim and front-end features. The body shape carries the upright proportions and compact stance associated with the Giulia Sprint, giving the finished RC car a distinct classic touring look rather than a generic shell. Mounted on a compatible 225 mm setup, the bodyshell suits hobby sessions centered on painting, detailing and refining a vintage on-road appearance. It also works well for display between runs, where the crisp lines, clear glazing areas and recognizable Alfa Romeo front-end character remain visible even before final finishing.  Warning! Not suitable for children under 14 years.

Body kits

Alpine A110 Jaegermeister Body Set, RC body shell

€41.99

The Alpine A110 Jaegermeister Body Set brings the classic 1973 coupe silhouette to M-chassis builds in a clear 1.0 mm polycarbonate shell. Its formed body lines recreate the compact 2-door shape with a light structure suited to RC use, while the Jaegermeister racing livery gives the finished car a period competition look. This set is designed for M-08 Concept, M-05 and M-06 chassis cars with a 210 mm wheelbase. The shell is supplied clear for trimming, drilling and painting, with masking stickers for windows and light areas and a marking sheet for the final graphics. Two race number schemes are provided, No.102 and No.34, allowing different period-style finishes from the same body set. Separate detail parts support the exterior look, including fitted components for lights, mirrors and trim areas, and metal parts are supplied for attachment. Paints and tools are not included. On the bench, the clear shell supports a step-by-step finishing process: trim the edges, prepare the mounting holes for the chosen chassis, paint from the inside, then apply the markings and fit the detail parts. Once mounted on a compatible 210 mm chassis, the low, rounded coupe form and bold motorsport graphics give club running sessions or display storage a distinctly vintage rally character.  Warning! Not suitable for children under 14 years.

Body kits

Audi R8 LMS 2008, RC body set, 257 mm wheelbase

€47.99

This RC body set brings the Audi R8 LMS 2008 into a clear polycarbonate shell shaped for 257 mm wheelbase touring car chassis. The transparent bodyshell arrives unpainted, so the surface is ready for custom colour work, race livery placement and a finish matched to a chosen build. Molded lines define the hood, grille, headlights, side vents, roof contours and rear section, giving the shell the low, wide stance of the GT racer. The set also contains a separate black rear wing and wing mounts, so the tail section can be built with the raised aerodynamic profile shown on the full-size car. A printed decal sheet covers visual details such as lights, grille elements, Audi rings and Audi Sport markings, which helps turn the clear shell into a recognisable circuit-style body. Yellow window masks are included for the glazing areas and support neat paint separation during the finishing process. On the bench, the shell suits builders who want to cut, paint and detail a touring car body around a specific race-car shape. Once finished and mounted to a compatible 257 mm chassis, the body gives club racing, practice sessions or display storage a distinctly modern GT look with crisp surface definition and motorsport graphics.  Warning! Not suitable for children under 14 years.

Body kits

BBX Body Set, RC body panels for BB-01

€22.79

The BBX Body Set brings the distinctive shape of the BB-01 platform back to the bench with 4 vacuum-formed shell parts in a transparent smoke-gray finish. The set combines 1 large main body section, 1 smaller cover piece and 2 matching side panels, creating the layered exterior lines that define the BBX silhouette once trimmed and mounted. Each panel is supplied as molded bodywork rather than pre-cut finished parts, which leaves room for careful trimming, paint planning and a layout matched to the chosen build. The vacuum-formed material keeps the shapes crisp across the raised contours and recessed sections visible on each panel. Molded fastener details add extra surface definition, giving masking lines, panel accents and other finishing steps a clear structure to follow. As a dedicated body set, these parts suit a fresh shell project just as well as a rebuild after hard running or a cosmetic update between paint schemes. On the workbench, the 4-piece format helps separate the body into distinct sections for cutting and finishing. Once prepared, the panels restore the BBX look with the same technical, futuristic character shown by the original body layout, making this set a focused choice for spare bodywork, refinishing plans or a second shell kept ready for later use.  Warning! Not suitable for children under 14 years.

Body kits

Beetle 1967 Body Set, RC body shell for 58173

€40.99

The Beetle 1967 Body Set brings classic rounded bodywork into an RC build with a clear polycarbonate shell shaped for 58173. Its transparent finish leaves the full surface ready for custom paint, while the familiar roof arc, curved fenders and compact rear section give the car its unmistakable 1967 silhouette once mounted on a chassis. Moulded panel lines define the doors, hood, side windows and rear engine cover, giving painters and detail-focused builders clear visual guides for masking and finishing. Marked body post positions are already visible on the shell, helping align mounting points before installation. A flat trimming flange runs around the lower edge so the outline can be cut cleanly to suit the final setup. As a replacement body set, this shell also suits rebuilds where an earlier body has taken track wear or where a new colour scheme is planned. On the bench, the clear shell supports careful cutting, test fitting and paint planning before the first run. Once finished and mounted, the Beetle form stands out through its rounded profile and vintage proportions, whether the aim is a period-inspired racer, a clean road-car look or a refreshed chassis presentation.  Warning! Not suitable for children under 14 years.

Body kits

Body Set Citroen 2CV Charleston, RC body set

€40.99

The Body Set Citroen 2CV Charleston brings the unmistakable silhouette of the classic compact car to compatible M-chassis builds in lightweight polycarbonate. Rounded fenders, the curved roofline and the rear spare wheel cover shape give the shell a period-correct look that changes the whole stance of a chassis once mounted and finished. Separately molded plated parts are supplied for the headlights and side mirrors, so key exterior details are handled as distinct components rather than molded into the shell alone. The set also comes with stickers for the markings and a dedicated masking sticker sheet for paint work, which helps define window areas and trim lines during finishing. Instruction artwork shows body preparation with cut lines and mounting holes in 2 mm, 4 mm and 6 mm sizes, plus guidance for antenna routing where needed. The shell is made for L wheelbase 239 mm applications and is compatible with M-05, M-06 and M-07 Concept chassis cars. On the bench, the clear body gives builders room to choose the final paint scheme while keeping the Charleston character through its molded proportions and trim layout. Once mounted on a compatible chassis, the compact vintage form creates a very different road presence from modern hatchback or racing shells, making club running sessions and display storage feel more individual.

Body kits

Body Set Ford Escort MK.II Rally, RC body shell

€41.99

This RC body set brings the Ford Escort MK.II Rally into a clear polycarbonate shell shaped for a 239 mm L wheelbase MF-01X chassis. The lightweight body captures the car's square-cut rally profile, while separate polycarbonate light cases and additional molded exterior parts give the shell more depth once painted and assembled. White injection molded parts are supplied to recreate the side mirrors, bumper and fog lamps, so the finished shell carries distinct exterior pieces rather than a single-piece look. The set also provides masking stickers for the paint job and marking stickers for the final livery, supporting the usual inside-painting process used for polycarbonate RC bodies. The manual notes cut and mounting work such as 6.5 mm and 4 mm holes, plus body attachment on the MF-01X long-wheelbase layout. An LED light unit can be fitted if installed separately. On the bench, the clear shell leaves room for individual color choices, window tint treatment and careful decal placement across the Escort's classic rally lines. Once mounted on a compatible chassis, the separate lamps, mirrors and bumper help the body read clearly from multiple angles during running sessions or display between drives.

Body kits

Body Set MB Race Truck Actros MP4, RC body set

€63.99

The Body Set MB Race Truck Actros MP4 brings racing truck styling to an RC build with a polycarbonate shell shaped for the body, cab and coupler. Its form follows the look of a competition tractor unit, so the finished model carries the tall cab profile, pronounced front section and track-focused character associated with truck racing. Separate molded parts add exterior definition beyond the main shell. Side mirrors, front and rear light cases, and the grille emblem are supplied as individual components, so these areas stand out with more depth than a one-piece body alone can provide. The set also contains stickers for sponsor markings and livery, which help recreate the layered graphics used on race trucks. As a spare body set, it suits replacement work, a fresh shell for a running chassis, or a second body prepared with a different paint scheme. Compatibility with the TT-01 Type-E and TT-02 chassis makes the set relevant for hobbyists already building on these platforms. The clear body format supports custom painting before final mounting, whether the aim is a race-inspired finish for track sessions or a detailed display shell with motorsport presence.

Body kits

Body Set NSX, RC body set, 190mm touring car

€48.49

This RC body set brings the Acura NSX shape to 190mm on-road touring car chassis with a clear polycarbonate shell that is ready for trimming, painting and final detailing. The low, wide coupe form gives touring car builds a modern supercar look, while the transparent finish leaves full control over color choice and race-inspired styling. The shell is designed for 257mm wheelbase chassis and can be fitted to a wide range of Tamiya platforms when the overall width is 188mm or less. Depending on the chassis, the antenna hole and rear body mounting hole positions may need to be changed to match the layout. The set also provides separate mirror parts, masking stickers and interior headlight depictions, so the finishing process can move beyond a plain shell into a more complete scale exterior. Marking stickers allow either Honda or Acura decoration, and the layout also supports a left- or right-hand drive appearance. On the bench, the clear shell supports a full custom paint sequence from inside the body, with masking used for windows and light areas before the final graphics go on. Mounted on a compatible touring car chassis, the 190mm width and NSX lines create a focused road-car stance suited to club running, body replacement or a fresh visual direction for an existing machine.  Warning! Not suitable for children under 14 years.

Body kits

Body Set Sand Scorcher 2010, RC body set, ABS

€60.99

Body Set Sand Scorcher 2010 brings the unmistakable Baja Bug shape to an RC build with an ABS shell, widened fenders and an open roof section that gives the body its lean desert-racer profile. The set is presented as an assembly body package, with separate molded parts laid out for painting, detailing and final fitting. Alongside the main shell, the contents shown include a clear tinted window section, chrome-plated exterior parts, a driver torso figure and a large marking sheet. The decal selection covers Baja Bug graphics, sponsor-style logos, caution labels, switch markings and number options including 506 and 537, allowing different race-inspired finishes. Manual references also show separate light parts, rear lamp details, a license plate section, exhaust pieces and mounting hardware such as screws, washers, nuts, body mount plates and a snap pin. Paint and cement are not included, and the instructions indicate color detailing for areas such as lamps, trim and exterior accents. On the bench, the body set suits builders who want to paint a classic off-road Beetle-style shell and add period-style markings with precise placement. Once fitted to a compatible chassis, the finished body gives an RC buggy a strong vintage racing character with visible cockpit, lighting and trim details.

Body kits

Body-Set Mitsubishi Lancer EVO X RC bodyshell

€56.99

The Body-Set Mitsubishi Lancer EVO X brings the unmistakable shape of the Evolution X to 1:10 touring car builds with a clear polycarbonate shell that captures the sedan's low nose, pronounced grille area and strong rear wing profile. Once painted and mounted, the shell gives compatible chassis a road-car presence that reads clearly on the track and on the bench. This body set is designed for a standard 257 mm wheelbase and suits chassis with a total width of 186 mm or less. Compatibility listed in the data includes DF-03Ra, TT-01 standard wheelbase machines, TA07 series platforms, TA06 series platforms, TB-03, TB-04, TB-05, TA08 PRO, TC-01, XV-02PRO and multiple TRF419 and TRF420 variants. The shell supports lighting installation with up to 8 positions for 5 mm LEDs and 6 positions for 3 mm LEDs, allowing detailed front and rear lamp layouts. White H mirror parts, silver metal plated J light cases, screws, nuts, stickers and masking seals are included for finishing work. During a fresh body build, the masking seals help define window lines before paint, while the separate light cases and mirrors add depth once the shell is trimmed and assembled. On a completed chassis, the EVO X form suits club running, display between sessions and custom touring car projects built around realistic saloon styling.  Warning! Not suitable for children under 14 years.

Body kits

Buggy Champ 2009 Body Set, RC spare bodyshell

€42.49

The Buggy Champ 2009 Body Set brings the signature outer shape of this classic buggy back into focus for restoration, replacement and custom finishing work. As a dedicated body set, it serves as the visible shell for an existing Buggy Champ 2009 build and gives repaint projects a clean base for a fresh livery. This set is aimed at model builders who want to refresh a worn shell, keep a spare bodyshell ready for running sessions, or prepare an alternative finish for display. The body component carries the visual character of the Buggy Champ 2009, making it useful when an original shell has been damaged or when a second painted version is planned. Batteries are not included. With an assembly time listed in minutes, the set belongs in the model workshop context rather than as a complete ready-to-run vehicle. On the bench, the body set can be trimmed, painted and finished to match a faithful period look or a more individual racing style. It also works as a practical replacement kept aside between running sessions, so an existing buggy can return with the correct silhouette and a renewed exterior.  Warning! Not suitable for children under 14 years.

Body kits

Buggyra Fat Fox Body, RC body set, polycarbonate

€68.99

The Buggyra Fat Fox Body brings race-truck styling to compatible RC chassis with a clear polycarbonate shell set shaped around the Buggyra Fat Fox form. The 3-piece layout uses 2 cab components and a main body section, creating the distinct proportions of the racing truck before paint and markings are applied. The set also provides a separate polycarbonate rear fender and coupler section, plus molded side mirrors and a 2-piece rear bumper for the exterior finish. Marking stickers reproduce the #1 Buggyra Racing 1969 truck from the 2018 season driven by Adam Lacko, carrying sponsor graphics and livery details across the cab and bodywork. Taillight areas are compatible with separately sold 5 mm LEDs, which supports a more detailed rear end when lighting is added during the build. Standard wheelbase TT-01 Type-E and TT-02 chassis cars are named as the matching platforms for fitment. On the bench, the clear shell can be trimmed, painted and finished to suit a race-truck build with a strong competition look. Tamiya PS spray paint is required separately to complete the body, making this set a focused choice for refreshing a used chassis or preparing a new truck-style conversion.  Warning! Not suitable for children under 14 years.

Body kits

Citroen 2CV Rally Body Set for M-Chassis Cars

€37.99

The Citroen 2CV Rally Body Set brings classic rally styling to M-Chassis cars with a clear 1.0 mm polycarbonate shell shaped for this distinctive compact body. The transparent finish arrives ready for hobby painting, so color, window treatment and final livery can be tailored to a fresh rebuild or a full visual change on an existing chassis. Alongside the main shell, the set provides separate exterior parts that sharpen the finished look with more dimensional detail than a single-piece body alone. Bumper and mirror components stand proud from the shell, while the recovery ladder and attachment bracket depictions add period rally character to the bodywork. The molded lines for doors, hood, fenders and front-end details give clear visual guides during cutting, painting and final fitting. Marking stickers complete the race-inspired appearance, and the included masking stickers are intended for use during painting to define the window areas cleanly. This spare body parts set fits M-Chassis cars and works well for replacing a worn shell, preparing a second painted body for different running conditions, or building a dedicated rally-style look around an existing platform. In a workshop setup, the clear polycarbonate surface supports careful paint layering from the inside, followed by detail parts and graphics for a finished shell with a crisp, competition-inspired presence.  Warning! Not suitable for children under 14 years.

Body kits

Citroen DS Body Set, RC bodyshell for MB-01

€40.99

The Citroen DS Body Set brings the unmistakable silhouette of the classic French sedan to an RC build with a clear polycarbonate shell shaped around its streamlined roof, covered rear wheels and long, low stance. Once painted and mounted, the form gives an MB-01 chassis car a very different road presence from a typical hatchback or coupe body. The shell is supplied as a clear body part set, so the exterior finish can be built up from the inside with a custom paint scheme. Separate attachment parts are included for fitting, and the plated trim pieces break out key exterior details instead of leaving them moulded into the main shell. The set also comes with stickers for body markings and dedicated masking stickers to define painted areas during finishing. For M-Chassis applications, the body is specified for a 139 mm wheelbase. The front wide tread setup uses wheel axles included in Item 51730. On the bench, the clear shell, trim parts and sticker set support a focused finishing process built around painting, masking and final detailing. Once mounted on a compatible chassis, the DS shape suits smooth on-road running, display between sessions, or a period-inspired custom build with chrome accents and classic proportions.  Warning! Not suitable for children under 14 years.

Body kits

Clear Body Shell, RC car bodyshell without holes

€24.79

This clear bodyshell brings a defined pickup or SUV-style silhouette to an RC car build, with vacuum-formed polycarbonate shaping that gives the hood, roof and side sections crisp molded lines. The transparent finish keeps the surface fully visible during preparation, so trimming edges, checking wheel arch clearance and planning a paint scheme can all be handled with a clear view of the shell's contours. The shell is supplied without mounting holes, which leaves body post placement open to the chassis layout used for the build. Pre-marked hole positions on the hood and roof provide a visual guide for drilling, while the molded front grille area, window outlines and arch contours add structure that becomes more pronounced after painting. The unpainted surface also supports masking work, color separation and detail finishing without covering factory-applied graphics. On the bench, the clear shell suits careful measuring, test fitting and body post alignment before final mounting. Once trimmed, drilled and painted, it gives an RC car a distinct truck-inspired profile that changes the look of the chassis with clean, custom bodywork.  Warning! Not suitable for children under 14 years.

Body kits

Clod Buster Body, RC bodyshell for 58065

€40.99

This replacement bodyshell for Clod Buster 58065 brings the unmistakable shape of a classic single-cab pickup to an RC truck build. The white molded shell combines the cab and cargo bed in one piece, with window openings, wheel arch cutouts and a defined hood area that give the body its full truck silhouette before paint and finishing begin. Fine molded details add structure across the surface. Door lines, hood contours and side panel shaping create clear reference points for masking, trim work and color separation, while the ribbed bed floor gives the rear section extra texture. A recessed hood scoop and the roof insert detail add further character to the upper surfaces, so the shell keeps its form from multiple viewing angles. Small preformed mounting holes are already present, supporting use as a replacement body or as the basis for a fresh custom project built around 58065. On the bench, the unpainted finish leaves room for period-inspired color schemes, race-style graphics or a clean factory look. Once mounted, the pickup profile, open window areas and cargo bed shaping give the truck a strong visual presence whether the focus is restoration, customization or regular running use.  Warning! Not suitable for children under 14 years.

Body kits

DT-03T Aqroshot Body with Wing, RC body set

€31.99

The DT-03T Aqroshot Body with Wing brings a fresh outer shell to an RC truck build with clear polycarbonate that is supplied unpainted for a fully custom finish. Its molded shape combines a low aerodynamic nose, a defined hood scoop, a cab with window outlines and an open rear bed, creating a focused short-course style that changes the whole look of the chassis once fitted. The transparent shell is shown with the excess trim flange still attached, which indicates a new, untrimmed part ready for cutting and painting from the inside. Molded structural details in the bed area add depth to the rear section, while the window lines give clear visual guides during finishing. Pre-marked mounting points on the hood and windshield area help align the shell with body posts during setup. The included wing completes the rear profile and adds another styling element to the finished truck body. On the bench, the clear surface supports detailed paint planning before the first cut is made. Once mounted, the shell gives an RC chassis a sharp racing pickup character for track sessions, display between runs, or a full visual refresh after wear on an earlier body.  Warning! Not suitable for children under 14 years.

Body kits

Endless 370Z Drift Body Set, RC bodyshell

€56.99

The Endless 370Z Drift Body Set brings a full competition-style coupe shape to 1:10 RC car builds, combining a clear polycarbonate shell with the sharp proportions, wide arches and low roofline associated with drift and touring machines. Once trimmed, painted and decaled, the body gives a chassis a planted visual stance that suits track sessions, tuning displays and shelf presentation alike. This body set is specified with a WB257 wheelbase and is designed for chassis with a total width of 186 mm or less. Fitment is stated for TA07 PRO, TA07 MS, TA06, TA06 PRO, TA06 MS, TB-03, TB-03 VDS, TB-04, TB-04 PRO, TB-05 PRO and TA05 ver. II chassis, and also for TA07 MSX, TB-Evo.6, TB-Evo.6 MS, TB-Evo.7, TRF419, TRF419X, TRF419XR, TRF420 and TRF420X chassis. On some chassis, the antenna hole and rear body mounting hole position need to be changed to match the layout. The scope of delivery includes 1 body kit, giving builders the base needed for a custom painted shell with the Endless race livery shown on the included markings. It suits fresh bodywork for a drift conversion, a replacement shell for an existing touring chassis, or a new visual direction for a competition setup where wheelbase and width already match the stated dimensions.  Warning! Not suitable for children under 14 years.

Body kits

Fiat 131 Abarth Rally Body Set, RC bodyshell

€40.99

This clear polycarbonate bodyshell brings the Fiat 131 Abarth Rally Olio Fiat onto the MF-01X platform with the sharp, boxy proportions and competition details of the original rally machine. The lightweight shell gives painters a clean base for a custom finish, while the molded body lines define the bonnet, grille, windows, doors and widened fenders with strong scale presence. Separate components build out the exterior with a rear wing, roof spoiler, fog lamps, side mirrors and light cases, adding depth beyond the main shell. Metal attachment parts are included for mounting these details. The set also comes with marking stickers and masking stickers, so trim graphics and paint separation can be handled with parts made for this specific body. Compatibility is specified for the MF-01X chassis in L configuration with a 239 mm wheelbase, which keeps the wheel openings and overall stance aligned with the intended layout. On the bench, the clear shell supports an inside paint job followed by detail assembly and decal application. Once mounted on a matching chassis, the finished body suits rally-inspired running sessions, display between drives, or a fresh rebody project built around the distinctive Fiat 131 Abarth shape.

Body kits

Fiat Abarth 1000 TCR Body Set for MB-01 Chassis

€38.99

The Fiat Abarth 1000 TCR body set brings the compact, muscular shape of the Abarth-tuned racer to the MB-01 platform in a clear polycarbonate shell made for custom finishing. Molded body contours capture the widened stance, short overhangs and classic competition profile, creating a strong base for a retro touring build with a distinctly period-correct silhouette. This set is intended for S 210 mm wheelbase MB-01 chassis cars and is supplied as a clear body part set for painting. Marking stickers and masking stickers support the finishing process by defining graphic placement and paint boundaries before the final livery goes on. Metal attachment parts are also included for fitting. The recommended tire setup uses 55 mm diameter front tires and 60 mm diameter 60D rear tires, a combination that supports the intended stance and wheel fit of the shell. Chassis and cockpit parts are not included. On the bench, the clear shell leaves room for a full custom color scheme, from understated road-race looks to bold Abarth-inspired striping. Once mounted on a compatible MB-01 chassis, the compact body shape, flared arches and race-bred proportions give club running, display storage and finishing sessions a focused vintage competition character.

Body kits

Ford Bronco '73 Body Set, RC body shell, WB252

€57.99

This body set brings the 1973 Ford Bronco into RC form with a polycarbonate shell that captures the upright stance, flat body sides and short overhangs of the classic 4x4. Once painted and mounted, the shape gives a compatible chassis the unmistakable look of a vintage off-road truck with a hardtop silhouette and crisp panel definition. Separate metal plated parts for the grille and side mirrors add contrast against the painted shell and help define the Bronco face from the front three-quarter view. The set also comes with stickers and masking seals, so the finishing work can follow the body contours, window frames and light areas with more control. The instruction material shows cut lines, hole positions and paint stages, including 6.5 mm, 5.5 mm and 4 mm openings that are made during preparation. Paint is applied from the inside of the polycarbonate body, with masking used in sequence across the window and light sections before the exterior markings are added. On the bench, the shell supports a detailed finishing routine built around trimming, drilling, masking and decal placement. Mounted on a compatible CR-01 chassis with a 252 mm wheelbase, the finished Bronco body suits trail-style running, shelf display between sessions, or a fresh visual change for an existing RC 4x4 build.

Body kits

Ford Bronco 2021 Body Set for CC-02 Chassis

€59.99

This body set brings the Ford Bronco 2021 into a scale RC build with a 1.2 mm polycarbonate shell shaped around the full-size vehicle's upright off-road profile. Round front lights, raised lines over the front fenders and oblong taillights are worked into the molding, so the painted shell carries the Bronco look with clear, recognizable proportions on the bench and on the chassis. Separate PC-ABS H parts add key exterior details including the grille, mirrors, spare tire cover and door handles, while metal-plated K parts are used for the light cases. Metal attachment parts are also included for mounting these details to the body. The set also contains marking stickers and masking stickers, supporting both the paint stage and the final trim layout with model-specific accents. The body parts set does not include the kit-standard roof rack part. Compatibility is specified for CC-02 chassis cars with M wheelbase 252 mm, making this set a focused choice for builders planning a Bronco-based trail or display machine on that platform. The clear shell arrives ready for cutting, painting and detailing, with the separate parts giving the finished build more depth across the front, sides and rear.  Warning! Not suitable for children under 14 years.

Body kits

Ford Escort clear bodyshell, RC car body

€45.49

This clear Ford Escort bodyshell brings classic performance-sedan character to an RC car build through sharply molded polycarbonate surfaces and a transparent finish ready for custom paint. Round headlight shapes, twin hood vents, window outlines and pronounced wheel arch contours give the shell a defined structure that stands out on the bench and on the track. The shell is supplied unpainted, so masking, backing colors and trim choices can be matched to a specific racing look or road-car style. Raised body lines provide clear visual guides during cutting and paint separation, which helps keep stripes, window borders and panel details neat. The lower edges are formed for trimming, and the WB257 specification identifies the wheelbase fit this shell is designed around. This version is supplied without body holes, leaving mounting points to be prepared for the intended chassis position rather than fixed in advance. Mounted on a compatible RC platform, the Escort silhouette, rear wing shape and flared fenders create a purposeful touring car presence in running sessions or display between drives. On the workbench, the transparent shell supports a hands-on finishing process centered on trimming, painting and detailing rather than prefinished graphics.

Body kits

Ford F350 Front & Rear Body, RC body set

€43.49

This Ford F350 front and rear body set gives model 58372 the pickup silhouette back in clean, unpainted form. The white shell is suited to rebuilds, replacement work and custom finishing, with the cab and cargo bed shape already moulded so the exterior can be prepared for the next stage of the build. The main body section shows the truck's structure through defined window openings, bonnet area, side door lines and pronounced wheel arches. A ribbed rear bed adds the utility-truck look that belongs to the Ford F350 shape, while the separate front and rear body parts focus this set on the outer bodywork rather than the running gear. That makes it useful when the chassis remains serviceable but the visible shell needs renewal. The unpainted surface also leaves room for colour, markings and trim choices that suit a restoration or a new visual direction. On the bench, the body parts support careful test fitting, surface preparation and paint planning around model 58372. Once finished, the shell brings the truck character back to display use or running sessions with a body shape that matches the intended pickup style.  Warning! Not suitable for children under 14 years.

Body kits

Ford Focus RS 2003 Body Set, RC bodyshell, 257mm

€40.99

This clear bodyshell set brings the 2003 Ford Focus RS Custom to 257 mm wheelbase RC chassis cars with a lightweight 1.0 mm polycarbonate shell and a shape defined by crisp body lines, a hood scoop and a rally-style hatchback stance. Once trimmed, painted and detailed, the shell gives compatible on-road builds a distinct motorsport look that stands out on the bench and on the track. The set goes beyond the main shell with separate parts for the side mirrors and rear wing, allowing these exterior details to sit proud of the body instead of being flattened into the molding. Metal attachment parts are included for mounting those details. The decal sheet adds model-specific graphics for lights, grille, trim and window areas, while the masking stickers help keep paint lines clean during the inside-paint process used for polycarbonate shells. Compatibility is specified for TT-01 Type-E and TT-02 chassis cars with a 257 mm wheelbase, excluding TT-02B, TT-02T and TT-02FT. On a fresh chassis build, the clear shell can be finished in a road-inspired or competition-style color scheme before the exterior details are attached. It also suits a worn bodyshell replacement, giving an existing compatible car a new silhouette with Focus RS styling and dedicated finishing materials in one set.

Body kits

Ford Mustang GT4 Body Set, RC car bodyshell

€47.99

The Ford Mustang GT4 Body Set brings full-size race-car character to a 257 mm wheelbase touring chassis with a clear polycarbonate shell shaped from access to the actual car's CAD data. That source material gives the hood, fenders, roofline and rear section a crisp, planted look once trimmed, painted and mounted, while the separate front and rear light cases help the lamp areas read as formed parts rather than flat outlines. The set is built around finishing detail. Separate molded components depict the rear wing and side mirrors, so the outer surfaces gain added depth beyond the main shell. Stickers supply the markings, grille and lamp graphics, while masking stickers help keep window and detail areas clean during painting. The instruction material also identifies drilling points for body mounts, an antenna opening and accessory fitment, including 6 to 6.5 mm body mount holes and 5 mm wing-related holes where required by the build. Polycarbonate keeps the shell light in use while still suited to the cutting, trimming and paint preparation steps typical of RC body finishing. Mounted on a compatible touring chassis, the shape changes the whole stance of the car, from shelf display between runs to track sessions with a fresh body style. Radio gear, a battery pack, a charger and paints are required separately.

Body kits

GoPro Monster Sport Swift Body Set for M-05

€48.99

The GoPro Monster Sport Super Swift Body Set brings the shape of the race car into an RC shell made from clear 1 mm polycarbonate. Molded front bumper contours, hood vents, wheel arches and body post mounting holes give the shell its defined form before paint and decals are applied. The set is supplied as body parts rather than a finished painted shell, which leaves the exterior open to a custom build around the included graphics. Alongside the main bodyshell, separate molded components add the rear wing, side mirrors and light cases as distinct exterior pieces instead of leaving those details only in the decal layer. Pre-cut window masking seals support paint work on the clear body and help keep the glazing areas sharply outlined. The included sticker sheet reproduces the GoPro Monster Sport Team livery with race-style markings matched to the car's competition appearance. Compatibility is specified for M-05 and M-05 PRO chassis, making this shell a focused choice for those platforms. On the bench, the clear body can be trimmed, painted and finished with the supplied markings; once mounted, the Swift silhouette gives an M-chassis build a compact touring car presence.

Body kits

GR SUPRA Body Set, RC body shell, 257mm wheelbase

€46.99

The GR SUPRA Body Set brings the low, wide presence of the TOYOTA GR Supra to RC touring car builds in a clear polycarbonate shell shaped for a 257 mm wheelbase chassis. Strong character lines across the front bumper, bonnet, roof and wheel arches give the shell a recognisable sports coupe profile before paint and markings are even applied. The shell is molded in lightweight polycarbonate, a material widely used for RC bodyshells because it combines low weight with the flexibility needed during running. Separate front and rear light cases add depth to the finished exterior instead of leaving those areas as flat printed details alone. Separate molded side mirrors extend that layered look further and help the body read as a complete road-car replica. Marking stickers provide the exterior graphics, while masking stickers support a cleaner paint layout by defining window and trim sections during the painting stage. This body set suits custom touring car projects, replacement shell builds and fresh visual conversions on compatible 257 mm wheelbase chassis. Trimming, painting and decal placement allow the final look to be tuned from understated road-car styling to a more track-focused finish, depending on the chosen colour scheme and setup.  Warning! Not suitable for children under 14 years.

Body kits

GR Supra Lightcase Canards, model accessory

€8.39

This accessory set brings the GR Supra bodyshell closer to its intended look with a clear polycarbonate lightcase and matching canards for the front section. The separate parts give builders defined pieces for the lamp area and aero detailing, supporting a cleaner finish than painting or improvising those shapes directly onto the shell. Polycarbonate is widely used in RC body components because it keeps fine formed contours light, and that matters when small trim parts need to follow the lines of a bodyshell closely. In this set, the lightcase and canards concentrate on the nose area, where the character of the GR Supra design is most visible. That makes the pack useful both for a fresh body project and for replacing worn or missing trim on a shell already in use. The parts are intended for model finishing work rather than as a standalone build, and the focused scope helps keep detailing work specific to the front-end layout. On the bench, the set fits naturally into painting and body preparation stages, when separate trim parts are added after the main shell has been cut and finished. It also suits restoration work on an existing GR Supra bodyshell where the front detailing needs to be renewed with matching components.

Body kits

Grasshopper I body shell, RC spare body in ABS

€26.49

The Grasshopper I body shell is a dedicated ABS replacement part for bringing the distinctive shape of this classic RC buggy back onto the chassis. The moulded form combines the front nose, cab section and rear body structure in one piece, giving rebuilds and restoration projects the correct outer profile before paint and final detailing are added. The shell is supplied in white ABS and arrives as an unfinished body component rather than a complete vehicle, which keeps the focus on accurate replacement and custom finishing. Open window areas, formed panel lines and the integrated mounting points reflect the original layout of the Grasshopper I body. That makes it useful for replacing cracked or heavily worn shells, refreshing an older build, or preparing a new finish scheme based on the familiar silhouette. The rigid ABS structure also suits hobby work that involves trimming, surface preparation and paint application. On the bench, this shell fits naturally into repair, restoration and customisation projects centered on the Grasshopper I. It can take a model from a tired exterior to a clean, ready-to-finish stage, or serve as the starting point for a fresh body set kept separate from a runner shell.

Body kits

Grasshopper II ABS Body, RC bodyshell

€26.49

The Grasshopper II ABS Body brings the signature silhouette of this classic RC buggy into a clean replacement shell ready for finishing work. Moulded in ABS and supplied in white, the bodyshell provides a solid base for repainting, restoration projects or a fresh custom build, with the rear wing and body contours already formed into the shape. Its hard shell construction gives panel edges, cockpit lines and side sections a defined surface that suits careful masking and colour separation. The preformed holes visible on the shell help align the body during fitting, which is useful when replacing a worn cover or preparing a second shell for a different livery. Because the body arrives unpainted, the final look can stay close to the original Grasshopper II style or move toward a completely new race-inspired finish. The image-led shape shows a pointed front, angular flanks and a raised roof detail that stand out clearly once painted. On the bench, this bodyshell suits restoration work, spare-shell preparation and custom display builds based on the Grasshopper II. It also works well as a dedicated shell for alternate paint schemes, keeping one body for running sessions and another for a clean finished look.  Warning! Not suitable for children under 14 years.

Body kits

Holiday Buggy Body Blue, body set for DT-02

€23.29

The Holiday Buggy Body Blue brings the recognizable shape of the 58470 buggy back into focus with a dark blue molded shell, open cockpit layout and pronounced off-road wheel arches. Its formed exterior gives a DT-02 based rebuild the same playful dune-buggy stance seen in the original design, with a raised rear section and broad side panels that frame the chassis cleanly once installed. The shell is supplied as a dedicated body set rather than a complete vehicle, making it a useful choice for restoration, replacement or a fresh custom finish on an existing runner. Multiple mounting holes and formed openings are built into the shell, so alignment follows the intended attachment points instead of relying on guesswork. The visible roll-cage structure inside the cabin area adds another layer of scale character, while the molded fenders and nose section define the buggy profile from front to rear. The glossy blue finish also gives a strong base for detailing work around lights, numbers and racing graphics where desired. On the bench, the body set suits rebuild projects that need a clean exterior after heavy running or long storage. Once fitted to a compatible chassis, the shell changes the whole presence of the buggy, turning a bare mechanical platform into a complete off-road model with classic recreational racing style.  Warning! Not suitable for children under 14 years.

Body kits

Honda MUGEN CR-X Body Set, RC car bodyshell

€44.49

This polycarbonate body set brings the Honda MUGEN CR-X shape to M-chassis RC builds with a compact 225 mm wheelbase layout and a distinctly low touring car stance. Flared fenders, deep bumper lines and the rear wing give the shell the sharp outline seen in classic race-prepared hatchbacks, while the clear body leaves room for a custom finish built around the included marking set. The shell is designed for several Tamiya M-chassis platforms, including M-08 CONCEPT, M-07 CONCEPT, M-06, M-06 PRO, M-05 ver.II PRO, M-05, M-05 PRO and MF-01X. For MF-01X chassis, the specified wheel and tire size is 60D, helping the body sit with the intended visual balance. The included masking seals define the window areas before paint, and the marking guides show decal placement across the windshield, sides, rear panel and trim sections. Mounting uses body posts and 6 mm snap pins, with the shell positioned so it clears the tires and track surface. On the bench, the body supports a focused finishing process with trimming, masking, painting and decal application. Once mounted, the CR-X silhouette changes the character of an M-chassis build with a compact, race-inspired profile suited to club running, shelf display or a fresh rebody project.  Warning! Not suitable for children under 14 years.

Body kits

Land Rover Defender 90 Body Set, RC body shell

€53.99

The Land Rover Defender 90 Body Set brings the boxy proportions and upright stance of the classic off-road vehicle to RC truck builds in a clear polycarbonate shell. Shaped for a short 242 mm wheelbase layout, it gives custom projects a recognisable profile that stands out on trail-style chassis and scale-focused running setups. The shell is designed for compatibility with CC-01 and CR-01 chassis, with trimming potentially required depending on the chassis used. ABS detail parts handle key exterior elements such as the grille, side mirrors, light cases and tire cover, adding separate components where molded depth matters most. The body also supports 5 mm LED installation, with positions for 2 white headlights and 6 rear lights, so lighting can be integrated into the finished build. Marking stickers recreate body graphics, while window masking stickers help define glazing and painted sections during the finishing process. This body set suits builders planning a detailed trail truck, a scale display vehicle or a repaint project based on the Defender 90 shape. For CC-01 use, a short wheelbase of 242 mm is required, and for CR-01 use, sections that contact the tires may need trimming during fitment.

Body kits

M-B 190E EVOII body shell, RC car bodyshell

€33.99

The M-B 190E EVOII body shell brings classic sedan lines to an RC car build with a clear polycarbonate form that is ready for trimming, painting and chassis-specific mounting. Its 257 mm wheelbase format suits projects that need a long, low 4-door silhouette, while the unpainted surface leaves the final finish open to race, street or drift styling. Molded body details shape the shell before any color is added, with bonnet lines, door outlines, window frames, wheel arches, front grille contours and headlight forms already defined in the polycarbonate. The raised rear wing extends the EVOII look and gives the finished car a distinct period touring-car stance. Because the shell comes without body holes, mounting can be planned around the actual post position on the chassis rather than adapted to pre-drilled points. The trimming flange around the lower edge and arch openings also leaves room for a careful cut line during setup. On the bench, the clear shell supports custom paintwork from the inside and a clean exterior surface once complete. On a running chassis, the long roofline, pronounced arches and crisp side trim create a recognisable saloon profile that stands out in track sessions, drift layouts or display storage between runs.

Body kits

M-B C11 Body Shell Set, RC car body with spoiler

€38.99

The M-B C11 body shell set brings a Group C race-car silhouette to an RC chassis with clear polycarbonate, a separate rear wing and sharply molded surface detail. Its long cockpit, wide front fenders and sculpted side sections give the shell the low, fast stance associated with endurance racing while leaving full freedom for custom paint and finishing work. The transparent shell is supplied unpainted, so colour is applied from the inside after trimming the body to shape. Pre-marked body post locations and wing mounting points help guide the fitting process, while molded panel lines, vent forms and window outlines give clear reference points for masking and detail painting. A smaller molded accessory piece is also included for added body detail. The polycarbonate construction keeps the shell light, which suits RC on-road use where body shape and weight both influence the finished look and running character. On the bench, the shell supports careful cutting, test fitting and paint planning around the cockpit, fenders and rear deck. Once mounted, the separate wing and defined aerodynamic surfaces create a purposeful prototype-racer appearance that stands out on tarmac circuits, club layouts and display shelves between running sessions.

Body kits

McLaren Senna Body Set, RC bodyshell, WB257 mm

€48.49

The McLaren Senna Body Set brings the low, aerodynamically shaped lines of the road car to a compatible RC chassis through a clear polycarbonate shell and separate ABS resin detail parts. Hood vents, side intakes, front light openings and the broad rear form are molded into the bodyshell, while the side mirrors and rear wing are supplied as individual black parts for a more defined finish. WB257 mm identifies the wheelbase this shell is designed around, making it a focused choice for on-road chassis builds that match that layout. Metal parts for attachment are included for mounting the separate components. The clear shell arrives unpainted, so the final look can be built through body color, trim work and decal placement rather than being fixed at the start. Marking stickers add the visual details, and masking stickers help keep painted window sections and other areas clean during finishing. Compatibility covers TT-01, TT-01 Type-E, TT-02 excluding TT-02B and TT-02T, TC-01, TA06, TA07, TA08 and TB-05 chassis cars. On wide tread rear chassis, the rear setup needs to be changed to standard tread before mounting. Once painted and fitted, the shell gives touring and on-road builds a supercar profile with a long nose, cab-forward cabin and prominent rear aero surfaces.  Warning! Not suitable for children under 14 years.

Body kits

Mercedes-AMG GT3 EVO Body, RC bodyshell WB251

€37.79

This polycarbonate bodyshell brings the Mercedes-AMG GT3 EVO shape into an RC build with a clean, uncut mounting area and a wheelbase reference of 251 mm. The shell is supplied without body post holes, so hole placement can be matched to the chassis in use and aligned with the intended stance before final mounting. The clear polycarbonate format leaves the exterior open for a full custom finish, whether the goal is a race livery, a single-colour track look or a display-focused body style. Because the shell is a body supply rather than a complete vehicle, the focus stays on fitment, painting and exterior detailing. The 251 mm wheelbase figure gives a concrete guide when checking compatibility with an existing RC chassis, and the uncut shell helps avoid committing to a mounting position too early in the build. On the bench, the shell supports careful measuring, marking and trimming before paint and final installation. Once mounted, the Mercedes-AMG GT3 EVO form gives an RC car a low, competition-inspired silhouette that stands out during running sessions and on the shelf between drives.  Warning! Not suitable for children under 14 years.

Body kits

Mini Cooper Racing Bodyshell, RC body set

€29.99

This Mini Cooper Racing bodyshell brings a compact touring-car look to RC builds, with a transparent 1.0 mm shell that leaves the finish completely open to the builder's own paint scheme and markings. The body without holes format also keeps the mounting layout flexible, so post positions can be matched to the chassis in use rather than fixed in advance. The WB210 designation gives a concrete compatibility cue for wheelbase matching before trimming begins. That matters when a shell is being chosen for a fresh build, a visual update or a replacement after track use, because the fit starts with the correct wheelbase format. The transparent shell arrives as an unpainted base, allowing masking, color layering and window detailing to be planned around the Mini Cooper Racing shape. As a body set, it focuses on the outer form of the RC car rather than the running gear underneath. On the bench, the shell suits careful cutting, test fitting and paint preparation. Once finished and mounted on a compatible chassis, the Mini Cooper Racing lines give club running, shelf presentation and restoration projects a distinct classic competition character.

Body kits

Mitsubishi Lancer Evo VII Body Set, RC body kit

€57.99

The Mitsubishi Lancer Evo VII Body Set brings rally character to compatible RC chassis with a clear polycarbonate shell, molded exterior lines and a full marking package based on the WRC car. Hood vents, door contours, wheel openings and the rear section are formed into the body, so the finished shell carries the sharp, competition-focused look of the original design once painted and trimmed. The set contains 1 body kit, decal sheets, masking seals, white molded accessories and metal hardware for the exterior assembly. The included parts support details such as mirrors, the rear wing and body mounting points, while the masking seals help define the window areas during painting. Manual guidance shown in the set indicates painting from the inside of the polycarbonate shell and applying the markings after the protective film is removed. The antenna hole position is changed according to the chassis in use, which keeps the shell adaptable across the stated platforms. Compatible use is specified for XV-02PRO, TA08 PRO and TC-01 chassis, making the set suitable for rally, touring or road-focused builds that share this body fit. On a finished chassis, the shell, wing and graphics create a motorsport presence suited to running sessions, shelf display or a period-style WRC recreation.  Warning! Not suitable for children under 14 years.

Body kits

Monster Beetle body shell, RC car body in ABS

€20.29

The Monster Beetle body shell brings the unmistakable Beetle-style shape into an RC build with a molded ABS form that focuses on exterior character and clean body lines. Rounded fenders, a curved roof and the compact rear section give the shell a strong period look on a compatible chassis, while the glossy red finish makes the contours easy to read during painting, fitting or display between build stages. Surface detailing is worked directly into the shell through window frames, door outlines, hood contours and rear side window shaping, so the body keeps its definition even before trim and final finishing are added. The roof opening adds another visible styling element and changes the profile from a fully closed shell. Wheel arch cutouts are already formed into the body, helping align the visual stance once the shell is mounted. As a separate body component, this version is centered on the outer shape rather than on chassis hardware or running electronics. On the bench, the shell suits restoration work, replacement use or a fresh visual direction for an existing Monster Beetle build. Mounted on a compatible RC platform, it gives the model a compact, rounded silhouette that stands apart from modern truck bodies and keeps the classic character at the center of the build.  Warning! Not suitable for children under 14 years.

Body kits

MOTUL AUTECH GT-R Body Set, RC bodyshell

€48.99

The MOTUL AUTECH GT-R Body Set brings Super GT race styling to compatible touring chassis with a clear polycarbonate shell shaped around the low nose, flared arches and rear aero profile of the Nissan GT-R race car. The transparent finish leaves the colour layout open to individual paintwork, while the included livery elements support a faithful motorsport look once the shell is trimmed and finished. Window trim, headlights, tail lights and race team graphics are supplied as vinyl stickers, allowing the exterior to build up in layers rather than relying on paint alone. A dedicated window masking seal is included to keep clear sections defined during painting. Side mirror parts and rear wing parts complete the outer form with the extra pieces that give the body its full competition character. The shell is designed for installations up to 188 mm overall width, with chassis-specific hole changes noted for some platforms. Compatibility covers a wide range of Tamiya touring chassis including TT-01, TT-02, TA06, TB-03, TA05 and TA05 Ver.II, with further fitment information provided for TA07, TA08, TB-04, TB-05, TC-01, TB-Evo.6, TB-Evo.7, TRF419 and TRF420 series platforms. On the bench, the clear shell supports a focused paint and decal session; once mounted, the finished body gives an RC car the sharp presence of a modern GT racer.  Warning! Not suitable for children under 14 years.

Body kits

Neo Fighter Body Set, RC bodyshell with wing

€26.49

The Neo Fighter Body Set brings the DT-03 buggy shape back into focus with a transparent polycarbonate shell and matching wing ready for finishing. Its pointed front, enclosed cockpit and sculpted side channels give the body a clear racing profile, whether it is being prepared as a replacement shell or as a fresh paint project for an existing chassis. The clear molded sheet leaves the surface unpainted, so masking, trimming and color planning can follow the formed panel lines of the shell itself. The body is supplied as a bodyshell with wing rather than a complete vehicle, making it a dedicated RC finishing component for builders who want the Neo Fighter look on hand. The image data shows molded body detail and a large rear aero element, both of which help recreate the original buggy outline once cut and mounted. Batteries are not included. On the bench, the shell suits repaint work, race-livery changes and general refurbishment of a used buggy. Once finished and fitted, the Neo Fighter form carries the familiar off-road stance seen on the DT-03 design, with the wing extending the visual length across the rear section.  Warning! Not suitable for children under 14 years.

Body kits

Neo Scorcher Body with Wing, RC spare body

€25.49

The Neo Scorcher Body with Wing is a clear replacement bodyshell set created for model 58568 and brings the buggy back to its original silhouette with the matching rear wing in place. The transparent shell gives full control over paint order and masking, making it suitable for a clean rebuild or a fresh custom livery on an existing chassis. Because this set is supplied as a clear body and wing, the finish can be planned around racing stripes, colour blocks or a faithful stock look before the first coat is applied. The formed contours follow the Neo Scorcher shape rather than a generic buggy outline, which helps preserve the model's intended stance once mounted. For workshop use, that means a damaged shell can be swapped out while keeping the visual identity of 58568 consistent. It also supports keeping one painted body for running sessions and another for display between maintenance jobs. On the bench, the clear surface makes trim lines and paint boundaries easier to judge before final assembly. Once fitted, the wing completes the familiar profile of the Neo Scorcher, whether the goal is a race-ready refresh or a carefully finished spare kept ready for the next rebuild.  Warning! Not suitable for children under 14 years.

Body kits

Nissan Skyline R32 Body Set, RC body shell

€59.99

The Nissan Skyline R32 Body Set brings the unmistakable GT-R profile to 1:10 touring car builds with a clear polycarbonate shell shaped for a 257 mm wheelbase. At 452 mm long and 187 mm wide, the body gives compatible chassis a low, planted road-car look that suits both drift-inspired styling and circuit-focused setups. The set contains 1 body kit and is designed as a finishing shell rather than a ready-painted body. Separate parts support added exterior detail, while decals help define lights, trim and model-specific graphics once the shell has been cut and painted. The clear moulding leaves full control over colour choice and livery direction. This shell can be used with FF-04 EVO, FF-03, FF-03 PRO, TT-02RR, TT-02D, TT-02 TYPE-SR, TT-02 TYPE-S, TT-02, TT-01D TYPE-E and TT-01 TYPE-E chassis. On some chassis, wide rear treads must be changed to narrow rear treads for correct fit. Mounted on a compatible 257 mm platform, the R32 shape changes the whole character of an RC car through its boxy front end, long roofline and rear wing profile. It suits fresh custom builds, body swaps for existing touring chassis, and garage projects built around classic Japanese performance styling.  Warning! Not suitable for children under 14 years.

Body kits

Opel Kadett GT/E Body Set, RC bodyshell, 239mm

€40.99

This RC bodyshell set brings the Opel Kadett GT/E onto compatible MB-01 chassis cars with a clear polycarbonate shell shaped around the coupe's classic rally form. The lightweight body gives a period-correct silhouette that stands out on the 239 mm long wheelbase layout, whether the car is being prepared for running sessions or lined up on a shelf between drives. The set goes beyond the main shell with separate front and rear bumpers, lightcases, spot lights and side mirrors, allowing the exterior to build up in layers instead of relying on a single molded piece. Clear polycarbonate leaves the paint scheme open to custom finishing, while the included masking stickers help define window areas during painting. Marking stickers add the final graphics stage, and the included metal attachment parts support fitting the shell to the chassis. The body set is supplied as a dedicated shell package rather than a complete car. On a matching MB-01 build, the 239 mm wheelbase compatibility makes this set a focused route to a retro rally look without changing the character of the chassis platform. It suits bench work centered on painting and detailing, then moves naturally into club running, photo setups or display with classic motorsport lines at the forefront.  Warning! Not suitable for children under 14 years.

Body kits

Porsche 956 Body Shell with Spoiler RC Car Body

€41.99

This RC car body set brings the unmistakable Porsche 956 shape into a lightweight polycarbonate shell with a separate spoiler section for a focused racing finish. The clear material shows every molded contour, from the closed cockpit canopy to the long side pods, so trimming lines, paint masks and body post positions stay easy to read during preparation. The main shell carries formed panel lines, vent details, front fender arches and mounting dimples that help guide the build and preserve the character of the original race car. Separate aerodynamic parts sit alongside the main shell rather than being molded into one piece, which supports a sharper rear profile once assembled. The low nose, extended rear deck and endurance-style proportions create a planted visual stance suited to circuit-focused RC builds. As an unpainted shell, it leaves full freedom for period-inspired liveries, modern race graphics or a clean single-colour finish. On the bench, the transparent shell supports careful cutting, test fitting and paint planning before final mounting on a compatible chassis. Once finished, the Porsche 956 form gives RC racing sessions a classic Group C presence, while the separate spoiler parts add extra visual definition at the rear.

Body kits

Racing Fighter body shell, RC car bodyshell

€28.99

This clear Racing Fighter bodyshell gives the 58628 machine a fresh outer skin with the sharp, upright look of a competition pickup. The vacuum-formed shell arrives transparent and unpainted, with the full molding still attached to the surrounding trim sheet for cutting, test fitting and finishing before mounting. The polycarbonate form shows a raised hood scoop, a defined cab roof, marked window areas and strong side contours that help paint masks, panel details and decals sit cleanly on the surface. Because the paint is applied from the inside, the outer face keeps its smooth finish while the molded lines remain visible during the build. The squared rear deck and angular side panels create a broad area for custom graphics, while the clear material makes it easier to plan body post holes and trim lines against the chassis underneath. This shell suits both a worn runner that needs a new body and a second build prepared in a different livery. On the bench, the uncut edges leave room to trim carefully for the intended wheel and tyre combination. At the track or on a home circuit, a freshly finished shell changes the whole character of the Racing Fighter, whether the aim is a faithful replacement look or a completely new colour layout.  Warning! Not suitable for children under 14 years.

Body kits

RC body shell, Mercedes CLK-GTR, clear polycarbonate

€31.49

This clear polycarbonate bodyshell brings the Mercedes CLK-GTR shape into an RC build with crisp moulded surfacing and a transparent finish ready for custom paintwork. The shell is supplied unpainted and without body post holes, so the cut lines, mounting position and final livery can be matched to the chosen chassis layout. The 1.0 mm material gives the body its formed structure, while the 257 mm wheelbase sets the proportions for compatible on-road platforms. Wheel arches, side windows, hood sculpting, side skirts, front bumper openings and rear bumper shaping are already moulded into the shell, so painted panel lines and decals can follow the body form cleanly. A rear wing is integrated into the shape, adding to the racing silhouette without needing a separate visual element in the main shell profile. The transparent surface also helps when marking trim lines before cutting. On the bench, the shell supports detailed finishing with masking, paint and race graphics. Once mounted, the long, low coupe profile gives touring and drift chassis a focused motorsport look that stands out in running sessions and display storage alike.

Body kits

Rock Socker CR-01, RC body shell, clear bodyshell

€27.49

The Rock Socker body shell for the CR-01 gives an RC crawler build a clear starting point for a fresh exterior finish. Formed in transparent polycarbonate, the shell shows the full pickup outline with a short cab, open rear bed, raised wheel arches and moulded body lines that stand out clearly before paint is applied. Its vacuum-formed construction keeps the surface light while preserving the shaped details around the hood, doors, side windows and bed rails. The transparent material helps when marking trim edges, checking wheel opening alignment and planning body post positions on the chassis. As a standalone bodyshell, it suits both replacement use on an existing CR-01 machine and custom projects built around a different paint layout than the original look. On the bench, the clear finish makes masking and colour separation easier to map before the first coat goes on. Once mounted, the pickup silhouette changes the character of a crawler build with a compact truck stance that suits rock sections, trail scenes and shelf display between running sessions.  Warning! Not suitable for children under 14 years.

Body kits

Sand-Viper body set, RC bodyshell for DT-02

€22.99

The Sand-Viper body set brings the lean buggy shape of this Tamiya design back onto compatible chassis with a clear polycarbonate shell and matching rear wing. As a spare body parts set, it suits rebuilds, shell swaps and fresh finishing work while keeping the Sand-Viper profile ready for the bench and the track. The main shell is supplied as 1 clear polycarbonate body, and the separate rear wing is also formed in polycarbonate for a consistent material match across the visible upper surfaces. Velcro tape is included in the set contents for mounting work. The body may be mounted on the DT-02 chassis platform as well as the TRF201 and DN-01. Stickers are not included, which leaves the exterior open to an individual paint and marking scheme based on the chosen build. On the workbench, the transparent shell makes cut lines, mounting points and paint planning easier to read before final fitting. Once mounted, the Sand-Viper form restores the buggy's low nose, raised fender lines and rear wing silhouette, giving compatible chassis a clean replacement shell for continued running or a separate body prepared for different finishes.  Warning! Not suitable for children under 14 years.

Body kits

Subaru Impreza WRC 2007 body set, RC bodyshell

€51.49

The Subaru Impreza WRC 2007 body set brings rally presence to an RC car build with a clear polycarbonate shell shaped around the full-size car's hood scoop, pronounced wheel arches and rear aero profile. Its transparent finish leaves the surface open for a custom paint layout, while the molded lines give trim, masking and decal placement clear reference points during preparation. Separate side mirrors and a rear wing add exterior definition that stands apart from a one-piece shell, giving the finished car more of the layered look seen on competition machines. The set also comes with a sticker sheet and masking stickers, so window borders, sponsor graphics and race details can be applied with sharper edges after painting. Antenna hole placement can be changed according to the chassis, which helps when adapting the shell to different mounting layouts. The scope of delivery includes 1 body kit. This bodyshell suits fresh rebuilds, replacement shells and custom livery projects where the focus is on paint, trim and accurate rally styling. It is compatible with XV-02PRO, TA08 PRO and TC-01 chassis, and also with TA05, TA04, TT-01, TGS, TNS, TB-02, TB-01, TL-01, TB Evolution IV, TRF415 and TG10-Mk.1 chassis, excluding short wheelbase and wide tread chassis.  Warning! Not suitable for children under 14 years.

Body kits

Tom's/Eneos GR Supra RC Body Set, 257 mm

€27.99

The Tom's/Eneos GR Supra bodyshell brings a low, wide racing silhouette to a 257 mm touring car build, with clear polycarbonate ready for cutting, painting and mounting. Sculpted bonnet vents, a sloping roofline, flared wheel arches and a pronounced rear section give the shell the sharp proportions of a modern competition coupe before the first colour coat is applied. The transparent molding leaves window outlines, door lines, front light recesses and rear deck contours clearly defined, which helps masking, paint separation and decal placement read cleanly on the finished car. Wide fenders and side skirts shape the body around a planted touring profile rather than a generic coupe form. The surrounding clear edge remains attached for trimming, so the shell can be prepared to suit the chosen chassis posts and body mounts. Batteries are not included. On the bench, the clear surface invites careful planning of livery, tint and panel detail before paint goes on from the inside. Once mounted on a compatible 257 mm chassis, the finished shell gives club running, display storage and body-set rotation a distinct GR Supra identity with motorsport-focused lines and crisp molded definition.

Body kits

Toyota Gazoo Yaris WRT/WRC Body Set, RC body shell

€48.99

This body set brings the Toyota Gazoo Racing WRT/Yaris WRC shape to 190 mm rally car machines with a clear vacuum formed polycarbonate shell and separate exterior parts that build up the full competition look. The 257 mm wheelbase design matches established Tamiya rally platforms, so the shell can be prepared, painted and mounted for a focused scale finish on compatible chassis. Beyond the main shell, the set provides individual polycarbonate parts for the front canards, front light cases and rear bumper blocks, plus separately molded rear wing and side mirror components. That combination creates more depth across the nose, flanks and tail than a single-piece shell alone. The body is designed to fit 257 mm TT-01, TT-02 and XV-01 chassis cars, giving builders a clear route to installation on compatible running gear. The clear shell format also supports inside painting, with masking stickers supplied to define window areas before colour is applied. Once trimmed and finished, the body suits rally-inspired builds that place scale presence alongside running use. Included stickers recreate the Yaris WRC markings, allowing the shell to move from a plain clear form to a race-livery finish with sponsor graphics, driver names and body accents. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Body kits

Toyota Hilux Extra Cab Body Set, RC bodyshell

€56.99

This body set brings the Toyota Hilux Extra Cab shape to long-wheelbase CC-01 builds with a clear polycarbonate shell that is ready for trimming, painting and final detailing. The form follows the rugged pickup profile closely, and the included markings recreate the 8th generation special full-size Extra Cab finished in the colors of the legendary Bruiser tribute vehicle created by Toyota's British subsidiary. Beyond the main shell, the set provides separate side mirror and light case parts that add more defined exterior detail once fitted. The body can be painted with PS spray colors, and the window masking stickers help keep the glazing areas clean during the paint process. LED compatibility is built into the layout as well: white 3 mm and 5 mm LEDs can be fitted at the front, while red 3 mm and 5 mm LEDs can be used at the rear to extend the lighting detail of the finished truck body. Marking stickers cover trim and livery elements needed to complete the look. Mounted on a 267 mm wheelbase CC-01 chassis car, the shell gives trail and scale runs a recognisable Toyota pickup presence with a tribute livery that stands out on the body sides and front end. It also suits rebuild projects that replace a worn shell while keeping the same chassis format and wheelbase.

Body kits

Toyota Hilux Front Body, model accessory

€23.79

This Toyota Hilux front body is a dedicated replacement part for model 58397, supplying the front body section when the original nose piece needs to be renewed. The separate component helps bring back the correct outline of the vehicle and keeps a rebuild focused on the exact area that has taken wear or damage. Used as a model accessory rather than a full bodyshell, this part is suited to repair work, restoration projects and spare-parts planning for an existing Toyota Hilux build. The front section carries the visual character of the pickup's face, so replacing it can sharpen the overall look before paint and finishing are completed. Because the data identifies this as the front body for 58397, the fit context stays specific to that matching model reference rather than a general universal body part. On the workbench, the separate front body section supports targeted maintenance without changing unrelated body areas. It also makes sense as a reserve component for long-term upkeep of a Toyota Hilux model that is already built, displayed or being prepared for a fresh body finish.  Warning! Not suitable for children under 14 years.

Body kits

Toyota Hilux Rear Body, spare body part

€31.79

This rear body part is made for the Toyota Hilux model 58397 and provides the shaped rear section needed for repair or restoration work. The white molded piece carries raised side walls, recessed surfaces and a central slot, giving it the formed geometry required to sit within the original vehicle structure rather than acting as a flat universal panel. The panel shows multiple screw holes, molded ridges and attachment tabs that indicate its role as a fitted replacement part for the existing assembly. Curved housing details on the underside add further shape where the section meets surrounding components. That molded structure matters during repair work, because the part is designed around the original fixing layout and connection points instead of requiring a generic adaptation. Used as a replacement for a worn, cracked or missing section, this rear body piece supports a cleaner rebuild of model 58397 and helps return the vehicle to its intended form. It suits workshop shelves, spare-parts storage and restoration projects where the correct body section is needed for an existing Toyota Hilux model.  Warning! Not suitable for children under 14 years.

Body kits

Toyota Land Cruiser FJ40 Body Kit for CC-01

€59.99

This body kit brings the boxy lines of the Toyota Land Cruiser FJ40 to RC builds with a clear shell that leaves the finish fully open to custom paint, trim work and period-style detailing. The molded front section already carries grille and round headlight forms, so the classic off-road character is present before the first color coat goes on. The shell is intended for the CC-01 chassis and is compatible with a 252 mm wheelbase. When mounting on chassis with different wheelbases, additional parts are required. That fit note matters during planning, especially for builders matching body proportions to an existing touring or crawler base. The transparent body format also makes panel lines and placement easier to judge while test fitting over the chassis. Decal markings shown for windows, lamps, stripes and Toyota Land Cruiser identification support a more complete scale finish once paint and final detailing are in place. On the bench, the body kit suits repaint projects, body swaps and fresh custom builds centered on a classic 4x4 shape. After trimming, painting and applying the markings, the finished shell gives a CC-01 based model a distinctly vintage Land Cruiser presence for shelf display or RC running sessions.  Warning! Not suitable for children under 14 years.

Body kits

Toyota Supra Body Set, RC body shell, WB257

€46.99

The Toyota Supra Body Set brings late-1990s street coupe styling to an RC chassis with a clear polycarbonate shell, separate detail parts and a full marking package. Molded lines for the grille, lamps, wheel arches and body contours give the shell its shape before paint, while the WB257 format aligns it with matching touring and drift platforms. The shell is designed for trimming, drilling and inside painting, with masking seals used on the windows before color is applied. Instruction data specifies 2 front body mount holes at 6-6.5 mm, 6 mm holes for the rear wing, a 6 mm antenna hole and additional 4 mm holes where marked. The set also includes H and J parts, a metal parts bag, snap pins, small snap pins, 3 x 10 mm tapping screws and double-sided tape for fitting the rear wing, mirrors and other exterior details. Numbered stickers map out the markings across front, rear and side views, and the sheet distinguishes between early production and late type decal positions. On the bench, the clear shell can be cut, washed, masked and sprayed from the inside before the protective film is removed for the final finish. Mounted on a compatible chassis, the shaped wing, mirror parts and detailed markings give the Toyota Supra body a focused tuner look suited to street-style display runs or drift-inspired setups.

Body kits

TRF Storage Box, 8-compartment case set

€19.99

The TRF Storage Box (8-Comp) (3) brings small-part organisation into a compact format built around 3 separate 8-compartment storage cases and 1 outer case. Together they create 24 independent sections for screws, nuts and similar hardware, so mixed fasteners can be separated by size, type or current project while staying in one place. Each inner case can be arranged as its own sorting unit inside the larger holder, which helps keep frequently used parts grouped for bench work, RC maintenance or transport to a race meeting. The semi-transparent material gives a quick view of the contents before opening, reducing time spent checking each section by hand. The outer case measures 186 x 96 x 39 mm, a footprint that fits easily into a tool bag, drawer or field box while still carrying multiple categories of small components. On the workbench, the compartment layout supports cleaner parts handling during builds, repairs and routine upkeep. In a pit setup or storage drawer, the 3 removable cases make it easier to separate hardware for different models, spare sets or tuning tasks without loose pieces shifting into one shared space.  Warning! Not suitable for children under 14 years.

Body kits

TT-02 Chassis PC Cover Set, RC chassis cover

€18.79

The TT-02 Chassis PC Cover Set adds a shaped polycarbonate layer over compatible TT-02 and TT-02FT chassis cars, creating a cleaner running area around the main chassis tub while keeping the layout light and easy to handle at the bench or track. The clear formed cover follows the chassis line closely and uses a separate switch cover to keep the installation neat around the power switch area. At the front, inner fenders can be attached to extend coverage around the wheel section. The mounting method uses touch fastener tape, with 2 strips measuring 9 x 150 mm supplied in the set, so the cover can be fixed in place and removed again when access to the chassis is needed. Hardware is also included with 6 screws and 6 thin 3 mm lock nuts, plus a TT-02 caution sticker sheet for finishing details that match the chassis application. This accessory suits TT-02 and TT-02FT builds prepared for regular running where a covered chassis layout is preferred. On short 251 mm wheelbase chassis using angled rear uprights 54549 or 54733 and offset 0 wheels, the cover may contact the tyres, so that configuration should be checked before fitting.

Body kits

TT-02B Dual Ridge, RC body set with rear wing

€19.49

The TT-02B Dual Ridge body set brings a clear polycarbonate shell and matching rear wing together for a race-focused buggy refresh. Supplied transparent and unpainted, the shell shows the full molded form of the Dual Ridge with defined aerodynamic lines, shaped wheel arches and mounting points already visible in the material. The separate rear wing includes side plates and attachment holes, so the body and wing can be prepared as a matched set rather than pieced together from mixed parts. The clear finish supports custom paint work on the inside of the shell, while the preformed contours give a reliable guide for trimming and fitting. As a replacement body, it restores the original silhouette of a TT-02B Dual Ridge; as a fresh shell, it opens room for a new livery, updated markings or a clean rebuild after heavy running. On the bench, the transparent polycarbonate makes cut lines, hole positions and body shape easy to read during preparation. Once painted and mounted, the shell and wing give an RC buggy a crisp, competition-style profile that suits track sessions, display between runs, or a full visual reset for an existing chassis.  Warning! Not suitable for children under 14 years.

Body kits

VW Golf II GTI 16V Rally Body Set, RC body

€40.99

This clear body set brings the classic shape of the VW Golf II GTI 16V Rally to 1:10 RC builds with a lightweight polycarbonate shell and model-specific exterior parts. The compact hatchback form, flared arches and rally-inspired proportions give compatible chassis a period-correct motorsport character once painted and finished. The set is made for long M-Chassis applications and is compatible with the MF-01X chassis in L specification with a 239 mm wheelbase. Alongside the main shell, the set provides separately molded components for the bumper, side mirrors and light cases, so the body can be finished with more defined front and side detail than a shell alone. The clear shell format is intended for painting, and the included masking stickers help cover window areas during the paint job. Marking stickers add the rally graphics shown for this body style, while metal attachment parts are supplied for fitting. Polycarbonate light cases are also compatible with separately sold 5 mm LEDs, which allows an illuminated setup on suitable builds. On the bench, the unpainted shell offers a clean base for a custom color scheme; once mounted on an MF-01X chassis with the correct 239 mm wheelbase, the finished body suits display runs, club sessions and scale-focused rally builds.

Body kits

VW Golf II GTI/Rally, RC body shell, WB239mm

€18.49

The VW Golf II GTI/Rally body shell brings classic hatchback lines into RC form with a transparent polycarbonate shell that is ready for a custom finish. Molded bonnet, roof, door and rear hatch details give the shape a recognisable road-car character before paint, decals or final trimming are added. Its clear, unpainted surface supports a wide range of paint schemes, while the lightweight shell format suits hobby builds where body choice shapes both appearance and fit. The widened fenders and side skirt contours push the silhouette toward a tuned street look rather than a plain stock outline. A 239 mm wheelbase reference helps when matching the shell to a suitable chassis layout and checking body post position before mounting. As a separate body component, this shell is aimed at builders who want to change the look of an existing RC car or start a fresh bodyshell project around a familiar full-size vehicle shape. On the bench, the shell can be trimmed, painted and test-fitted to refine stance and wheel placement. Once mounted, the compact 2-box profile and flared arches give touring or drift chassis a distinct period-inspired look that stands out in running sessions and display storage alike.

Body kits

WB257 RAYBRIG NSX Concept-GT Body Set

€48.99

The RAYBRIG NSX Concept-GT Body Set brings a full racing silhouette to 257 mm wheelbase touring chassis with a clear polycarbonate shell shaped for sharp aero lines, deep front detailing and a prominent rear section. Tamiya forms the shell with 3-piece slide mold technology, giving the body crisp contours that carry the look of the RAYBRIG NSX Concept-GT clearly once trimmed, painted and mounted. The set contains 1 body kit, stickers for the race markings, masking stickers for painting, ABS side mirrors and a rear wing. The clear shell is prepared for a detailed finish with molded window outlines, wheel arch definition and bodywork features that guide trimming and paint placement. Instruction data specifies body mount holes of 6 to 6.5 mm, 6 mm antenna holes where needed, and 4 mm holes in marked areas, so chassis-specific mounting can be matched during setup. Separate mirror and wing parts extend the bodywork beyond the shell and support the finished competition look. Compatibility centers on 257 mm wheelbase TT-01, TT-02, TB-04 and TA06 chassis cars, while additional fit guidance covers further chassis when overall width stays within 186 mm or 188 mm, depending on platform. Antenna hole position and rear body mounting hole position may need adjustment according to the chassis. Paints are required separately.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Ford GT Mk.II 2020, RC body set, WB257

soon available again

This 1:10 RC body set brings the Ford GT Mk.II 2020 onto a 257 mm wheelbase with a clear polycarbonate shell shaped around the car's low nose, deep side channels, roof scoop and raised rear bodywork. Once trimmed, painted and marked, the form reads as a focused circuit machine with the long, planted stance that defines the full-scale racer. The set contains the main body, H parts, light cases, buttresses, stickers, masking stickers and a metal parts bag for assembly. The clear shell is prepared by trimming straight sections with scissors and curved sections with a modeling knife, then opening the required 6.5 mm, 6 mm and 4 mm mounting holes for body posts, wing and mirrors. Side mirror surfaces are made from retained cut sections, and the instructions also note optional cut areas when the shell is used on a TA07 chassis. Paint is applied from the inside of the polycarbonate body, with masking for windows and lights before the race graphics are added. On the bench, the separate rear wing, mirror parts and buttresses give the finished shell more layered detail than a one-piece body alone. Mounted on a compatible chassis, the long canopy, vent openings and race livery create a strong track presence whether the shell is built for running sessions, a fresh repaint or a new body change for a 1:10 touring car.

Body kits

1:10 NiSMO Coppermix Silvia, RC body set

soon available again

The 1:10 NiSMO Coppermix Silvia body set brings drift-inspired coupe styling to compatible RC chassis with a clear polycarbonate shell that is ready for cutting, painting and final detailing. Molded lines for the hood, bumpers, windows, doors and wheel arches give the shell its defined shape, while the finished look echoes the graphic-heavy Coppermix race style seen on tuned street and drift machines. The set contains 1 body kit together with decal stickers and masking seals for the finishing stages. Light details, window frames, grille elements and side graphics can be built up step by step, giving the shell a more complete scale appearance once painted. The instructions also show fitting points for side mirrors and a rear wing, attached with small hardware from inside the shell. LED light installation is supported through dedicated light parts and mounting positions shown in the body instructions, allowing added realism when the matching hardware is used. Fitment is broad across Tamiya touring platforms, with installation possible on many chassis when total width is 186 mm or less. Depending on the chassis, the antenna hole position and rear body mounting hole position may need to be changed. On a completed RC car, the low coupe profile, large wing and detailed decal layout create a focused drift or street-racing look whether the shell is prepared for running sessions or finished as a display build.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Porsche 911 GT3 R (992), body set, WB 251 mm

soon available again

This 1:10 body set brings the Porsche 911 GT3 R (992) onto compatible touring car chassis with a clear polycarbonate shell that captures the low, aerodynamic form of the race car. The body is designed for a 251 mm wheelbase and gives builders a defined base for a custom painted finish with scale motorsport character. The set uses separate parts to build up the final look in layers. A separate polycarbonate rear wing and separate light cases add depth to the shell, while black parts depict the side mirrors and wing stays with sharper contrast against the painted body. Metal attachment parts are included for mounting these details. The clear shell format leaves the exterior finish open to individual colour schemes, and the included masking stickers help keep painted sections clean during the process. Marking stickers complete the body with race-style graphics and trim details. Fitment is intended for short wheelbase TT-01, TT-01 Type-E and TT-02 chassis cars, excluding TT-02B, TT-02T and TT-02FT. On TT-02 rear setups with wide tread, the rear must be changed to narrow tread before installation. The set suits replacement builds, fresh body projects and alternate race-day looks for compatible chassis already in use.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Subaru Impreza WRC 2008, RC body set

soon available again

The Subaru Impreza WRC 2008 RC body set brings the shape of Subaru's final factory-era WRC contender to 1:10 touring car builds with a clear polycarbonate shell sized at 434 mm long, 188 mm wide and a 257 mm wheelbase. Its rally profile, roof scoop, rear wing and widened arches give a chassis a competition look that stands out on the bench and on the track. The set is supplied as a body kit with stickers and masking seals, so paint lines, window areas and race graphics can be finished with clean separation. H and J detail parts cover the mirrors and lightcases in black ABS resin, and one side of the lightcases is metal plated for a brighter trim effect. The shell is intended for compatible touring and rally chassis, and wide rear treads on some platforms need to be changed to narrow treads for correct fitment. Short wheelbase chassis machines are not suitable. Compatibility extends across numerous Tamiya platforms, including TT-01, TT-01 Type-E and DF-03Ra chassis machines, making this shell a useful second body for drivers who run more than one car. On a painted and decaled build, the 2008 WRC form suits rally-inspired display between runs just as well as active chassis use at club sessions.  Warning! Not suitable for children under 14 years.

Body kits

1:10 Sumo Power GT Nissan GT-R body set

soon available again

This 1:10 body set captures the low, planted shape of the Sumo Power GT Nissan GT-R and is sized for standard 257 mm wheelbase touring chassis. The clear polycarbonate shell gives builders the basis for a detailed race-car finish, with the long hood, pronounced fenders, deep front section and large rear wing creating a focused GT stance once trimmed and mounted. The shell is designed for chassis with an overall width of 188 mm or less, and the mounting layout allows the antenna hole and rear body mount hole positions to be adjusted to suit the chassis in use. Instruction data for the shell shows front body mount holes at 6 to 6.5 mm, a 6 mm antenna hole, side 4 mm holes and rear 4.5 mm holes, giving clear reference points during preparation. The parts layout also shows sidemirrors, rear wing parts, masking seals, stickers, snap pins, small snap pins, O-rings and double-sided tape. LED mounting positions for 3 mm and 5 mm lights are provided, with separate light parts required. On a finished touring chassis, the body brings the look of a full GT race machine to track sessions, display shelves or workshop builds. The livery and body lines suit careful painting, masking and decal placement, while the adjustable hole positions help align the shell cleanly across a wide range of compatible platforms.  Warning! Not suitable for children under 14 years.

Body kits

1:12 Lunch Box, body set, ABS van shell

soon available again

This 1:12 Lunch Box body set brings the unmistakable van outline of the classic monster machine back into a build with an ABS shell made for chassis 58347. The formed body restores the tall roof, squared sides and compact van proportions that define the Lunch Box look on the chassis. ABS gives the shell a rigid structure suited to repainting, replacement work and model refresh projects where the original body has been damaged or heavily used. The body set is intended for builders who want to keep the established visual identity of the model while renewing the outer shell. The ShortDescription identifies it as Body Set Lunch Box ABS 1:12 58347, linking the shell directly to the matching version. The image-led styling cues of the Lunch Box design include the lifted van stance and the bold custom body shape associated with this series. On the bench, the shell supports restoration work, colour changes and display-focused rebuilds that keep an existing chassis in service with the correct body form. It also suits collectors maintaining an older Lunch Box model where the body shape matters as much as the running gear beneath it.  Warning! Not suitable for children under 14 years.

Body kits

F104 Body Set 2017, RC body set, polycarbonate

soon available again

The F104 Body Set 2017 brings modern formula-inspired bodywork to compatible RC chassis with a lightweight polycarbonate shell and matching driver parts. Its long, low profile, slanting nose and pronounced side pontoon shape echo the visual direction seen in the 2017 F-1 season, giving a finished car a sharp single-seater presence on the track or in the workshop. Beyond the main shell, the set provides additional polycarbonate parts for alternative lower side pontoon sections. These separate components make room for chassis layouts that use larger R/C equipment, so the body can be adapted more cleanly to the hardware underneath. The set is intended for F104 PRO II cars and is also compatible with F104 Pro Version 2 and TRF 101-102 with minor modifications. For finishing, Tamiya PS polycarbonate paint is required separately. The body also works with 2017 spec spare parts plastic wing sets in white or black. As a replacement shell or a fresh body for a new race-car look, this set suits rebuilds, maintenance work and custom paint projects around the F104 platform. Clear molded parts leave the final livery open, whether the goal is a clean test-car style or a bold circuit-ready color scheme.

Body kits

Hornet Polycarbonate Body Set with Rear Wing

soon available again

The Hornet body set brings the sharp wedge profile and raised cab shape of this classic RC buggy back into focus with a moulded polycarbonate shell and separate rear wing. The clear unpainted parts arrive ready for trimming, finishing and mounting, making them a strong base for a faithful restoration or a fresh custom livery on a well-used chassis. Window openings, vent slits behind the windscreen area, roof detailing and rear deck cutouts are formed directly into the shell, so the finished body keeps the recognisable lines of the original design. The polycarbonate construction suits hobby finishing work where low weight and shaped detail matter at the same time. Pre-marked body post points help guide placement during fitting, and the separate wing piece lets the rear section be finished as its own visual element. This set is a body-and-wing combination rather than a complete vehicle, so it focuses the work on exterior appearance and final presentation. On a restoration build, the shell can return an older Hornet to its familiar outline after heavy use. On a second build, it supports a spare bodyshell prepared in a different colour layout for track sessions, shelf display or a period-style finish that highlights the angular surfaces and cab contours.

Body kits

Mazda RX-7 Body Set, RC body kit, 186 mm

soon available again

The Mazda RX-7 Body Set brings the long hood, compact cabin and raised headlight form of the classic coupe to a clear RC shell made for custom finishing. Molded body lines, bumper openings and window frames give the shape definition before paint and markings are applied, so the finished car carries a crisp street look on 186 mm touring platforms. This body kit is supplied as a clear shell that is trimmed to shape, drilled for mounting points and painted from the inside with polycarbonate paint. The instructions show 6 mm to 6.5 mm body mount holes, a 6 mm antenna hole and 4 mm rear wing holes, plus cut lines around the lower edge and light areas. Numbered stickers and masking seals are part of the set, allowing windows, lamps, grille details and trim lines to be finished with sharper separation. Separate H parts form the side mirrors and rear wing, adding extra depth to the roofline and rear deck once attached. Compatibility covers a wide spread of Tamiya chassis when the total width is 186 mm or less, including TA07 PRO, TA06 PRO, FF-03 PRO, TB-04 PRO, TB-05 PRO, TA08 PRO, TC-01, TRF419, TRF419X, TRF419XR, TRF420 and TRF420X. Depending on the chassis, the antenna hole and rear body mounting hole positions are adjusted during setup. Paints are required separately.  Warning! Not suitable for children under 14 years.

Body kits

Nissan GT-R Street Version Body Set, RC car shell

soon available again

The Nissan GT-R Street Version Body Set brings full-size coupe styling to an RC touring build with a clear polycarbonate shell shaped around the R35 body lines. Molded grille contours, headlight recesses, hood forms, door lines and wheel arch definition give the shell a realistic base before paint and markings are applied. This body set is supplied as 1 body kit and is intended for finishing work, with masking seals and sticker sheets used to define windows, lights and exterior trim. Separate parts for the side mirrors and rear wing extend the shape beyond the main shell and help complete the road-car profile. The instructions also show compatibility with optional 3 mm and 5 mm LED installation positions, using dedicated stopper parts and mounting points inside the shell. For TA08 PRO and TC-01 chassis, installation is possible from a total width of 186 mm, with the antenna hole position changed according to the chassis. On TA07 MSX, TB-Evo.6 MS, TB-Evo.7, TRF419, TRF419X, TRF419XR, TRF420 and TRF420X chassis, the antenna hole and rear body mounting hole are adjusted to suit the layout. Mounted on a touring chassis, the low, wide GT-R form suits on-road running, display between sessions and detailed custom paint schemes in silver, white, red, black or gun metal. Builders can trim, paint and mark the shell to match a clean street finish or a more aggressive track-inspired look while keeping the Nissan silhouette at the center of the build.  Warning! Not suitable for children under 14 years.

Body kits

Sand Scorcher body set for RC buggy models

soon available again

The Sand Scorcher body set is a focused replacement part for the Sand Scorcher 58452, built around the unmistakable Baja Bug profile that gives this RC buggy its classic desert-racing presence. The shell captures the rounded Beetle-style roofline, pronounced front and rear fenders, and the compact off-road proportions that define the finished model on the bench or out on the track. As a body bag with 1 shell, this set suits rebuilds, restoration projects and alternate finishing plans where a fresh exterior is needed without replacing the full vehicle. It supports custom paint work, replacement after wear, or the preparation of a second shell with a different livery. The form shown in the source imagery points to details such as exposed wheel clearance, a front bumper opening and race-inspired graphic areas, all of which help preserve the Sand Scorcher's period off-road character when the chassis is already in service. In workshop use, the shell can be prepared as a clean replacement for an existing Sand Scorcher 58452 or held back for a separate colour scheme between running sessions. It also fits collectors maintaining the recognisable Baja Bug look while refreshing the outer body of a well-used RC buggy.

Body kits

Team Hahn Racing MAN TGS Body, RC spare body set

soon available again

The Team Hahn Racing MAN TGS Body brings racing truck style to compatible RC chassis with a complete replacement shell set in lightweight polycarbonate. The clear cab shell and matching body sections arrive unpainted, ready for trimming, interior spray work and the layered finish that gives the MAN TGS livery its track-inspired presence. The set is built around 4 molded polycarbonate parts and adds separately molded exterior details for a more complete final appearance. Side mirrors, a coupler, a rear bumper and front light parts are supplied as individual components, so the finished shell carries more of the shape and hardware seen on the full-size racing truck. Marking stickers cover the team graphics and numerous sponsor logos, while masking stickers help define window areas during painting. This makes the set suitable both for replacing a worn shell and for starting a fresh body project with the same Team Hahn Racing design. Compatibility is specified for standard wheelbase TT-01 Type-E and TT-02 chassis cars, making the set a focused choice for builders working within those layouts. On the bench, the clear parts support custom paint choices and careful decal placement; on a completed chassis, the finished body gives an RC truck build the bold lines and motorsport graphics associated with the MAN TGS race truck.

Body kits

VW Bus Type 2 T1 Body Set, RC spare body

soon available again

The VW Bus Type 2 T1 Body Set brings the 23-window microbus shape to an RC chassis with a clear 1.0 mm polycarbonate shell and separate exterior detail parts. Once painted and mounted, the tall roofline, broad front panel and classic window layout give an M-Chassis build the unmistakable look of the Volkswagen Type 2 T1 rolling across asphalt or a smooth indoor track. The body is supplied as a spare shell set rather than a complete chassis package, making it suited to replacement, restoration or a fresh visual conversion. Separate molded components create the bumpers, light cases and side mirrors, so key exterior features stand proud of the shell instead of being left only to printed graphics. The included masking stickers define window and light areas during painting, while the marking stickers add trim, lamps and body details after the paintwork is complete. The shell is compatible with M-Chassis cars using the 239 mm L wheelbase, giving a specific fit reference for matching the body to the chassis layout. On a workshop bench, the clear shell supports custom paint schemes from subtle two-tone finishes to brighter period-inspired looks. Mounted on a compatible M-Chassis platform, the long van silhouette changes the character of the car immediately, whether the aim is a faithful Type 2 T1 tribute or a fresh replacement body for regular RC running.

Body kits

BMW 318i STW, RC bodyshell, WB257 uncut

available in stores

The BMW 318i STW bodyshell brings a touring car silhouette to RC builds with a body shape based on the saloon racer and a WB257 layout that points to a 257 mm wheelbase. Supplied as an uncut shell without holes, it leaves the mounting pattern open for chassis-specific marking and trimming. That blank starting point matters during setup. Body post openings can be positioned to match the chosen platform instead of forcing a fixed drill pattern, and the shell can be trimmed around the wheel arches and lower edges to suit the final stance. The polycarbonate construction keeps the shell in the format commonly used for RC car bodies, and the clear finish leaves room for a race-inspired paint scheme, number graphics or a restrained single-colour look. Because the shell is sold without holes, planning the post locations and trim lines becomes part of the fitting process rather than an afterthought. On the bench, the BMW 318i STW shape gives a build a recognisable touring identity before the first run begins. Once painted and mounted, the long roofline, booted rear profile and saloon proportions also make the shell a strong choice for shelf display between track sessions.

Body kits

BMW M3 GT2 Body, model car bodyshell

available in stores

This bodyshell brings the BMW M3 GT2 shape into a focused model car build with a clear polycarbonate shell and a wide 257 mm format suited to compatible on-road chassis. The undrilled body arrives without body post holes, so mounting points can be marked and opened to match the chassis layout in use rather than forcing a preset position. The shell format leaves room for careful trimming, painting and livery work, which makes it suitable for builders who want to control both fit and finish. Wheel arch alignment can be set during the mounting process, helping the body sit correctly over the running gear of the chosen chassis. The clear surface supports custom paint application from the inside, while the BMW M3 GT2 form gives the finished car a recognisable touring race profile. As a replacement shell or the basis for a fresh body project, it adds a defined visual identity without locking the build into pre-drilled mounting points. On the bench, the shell suits measured fitting work, masking and colour layout before final mounting. Once finished, the 257 mm wide body gives compatible RC car builds a crisp motorsport look for running sessions, shelf display or a full repaint project based on an existing chassis.

Body kits

BMW M4 GT3 EVO, RC bodyshell, WB257

available in stores

The BMW M4 GT3 EVO bodyshell brings a current GT racing shape to RC car projects built around a WB257 layout. Supplied without body mount holes, it leaves the mounting points open for chassis-specific positioning, which helps align the shell to the posts already used on a compatible build. This model supply is aimed at body replacement, restoration work or a new exterior for an existing RC car rather than a complete ready-to-run vehicle. The uncut mounting area gives more control during fitting, especially when shell position, wheel arch centring and post alignment need to be checked before drilling. The named BMW M4 GT3 EVO form also gives painting and finishing work a clear direction, whether the goal is a clean race livery, a practice shell or a refreshed look after track wear. On the bench, the shell supports the measured steps of trimming, test fitting and marking hole positions before final mounting. Once fitted to a matching wheelbase chassis, it changes the visual character of the car with a low, competition-style silhouette suited to display between runs and use during regular RC sessions.

Body kits

Body Set Lunch Box Mini Clear

only available from customer service

Article number: 300054927 Product: Body Set Lunch Box Mini Clear This is an unpainted version of the body parts for the Lunch Box Mini (Item 57409). If you damaged your body with crazy wheelie driving, or just want an alternative paint job to the pre-painted yellow version, this is the product for you! • Lightweight and durable 0.8mm thickness polycarbonate. • Includes stickers to decorate the body and paint masking stickers for use in the painting process. • Body catches are not included. • Compatible with SW-01 chassis models.

Body kits

Body-Set Subaru BRZ (ZD8) WB257mm

available in stores

Body kits

Ford Ranger Blue Bodyshell, RC body set

available in stores

This Ford Ranger blue bodyshell brings pickup styling to an RC model build with a finished outer form that changes the whole look of a chassis in one step. As a replacement body, it suits rebuilds, refresh projects and custom truck layouts where the shell sets the character of the vehicle. The body format gives builders a dedicated exterior component rather than a complete vehicle, so it can be used to restore a worn model or start a new visual direction around the Ford Ranger shape. The blue colour provides a defined base appearance straight away and also leaves room for added detailing work where a project calls for trim, markings or further finishing. Because the data identifies this as a body, the focus stays on the visible shell that frames the stance and proportions of the model rather than on running gear or electronics. On a workbench, the shell can anchor a rebuild that needs a fresh exterior after heavy use. In a display setting, the Ford Ranger form and blue finish give an RC truck a recognisable pickup presence that stands apart from generic racing bodies.

Body kits

Mini Cooper M-C Body, model body shell

available in stores

The Mini Cooper M-C body shell brings a compact touring-car look to RC model projects while leaving the final fit in the builder's hands. Formed as a clear bodyshell and supplied without mounting holes, it supports a cleaner chassis-specific installation because body post positions can be marked and drilled to suit the intended setup. The WB210 designation points to a 210 mm wheelbase format, an important reference when matching the shell to a compatible platform. Clear polycarbonate construction allows paint to be applied from the inside, a standard RC finishing method that keeps the outer surface smooth while protecting the colour layer during handling. Because the shell arrives uncut, trimming lines and post openings can be aligned to the selected chassis rather than forced into a fixed pattern. That makes this shell useful for builders who want closer control over wheel centring, ride height appearance and the final body position. On the bench, the shell suits measured fitting, masking and paint planning before the first mounting holes are drilled. Once finished, the Mini Cooper M-C shape gives compatible RC builds a distinct classic hatchback profile with room for an individual colour scheme and race-inspired detailing.

Body kits

NISSAN R91CP Gr.C, model body set, wing parts

available in stores

The NISSAN R91CP Gr.C model body set focuses on the exterior race car form with the parts named in the data: body, wing and light case. That combination supports a clean rebuild, a replacement shell project or a fresh body preparation centered on the long, low Group C profile of the R91CP. The body shell forms the main visual structure, while the wing parts complete the rear aero shape and the light case adds the dedicated lamp housing element listed for this set. Because the data identifies these parts specifically, the set is best read as a targeted exterior package rather than a full vehicle kit or running chassis. This makes it useful when an existing model needs the correct R91CP Gr.C outer components, or when a separate build calls for this exact race car body style. The named parts also help keep the work focused on shell preparation and finishing instead of replacing unrelated mechanical sections. On the bench, the set fits projects where the bodywork defines the character of the finished model. In a collection, the NISSAN R91CP Gr.C shape, rear wing line and light case details support a race-bred look that stands apart from road car bodies.

Body kits

Porsche 911 GT1 body shell for RC chassis

available in stores

This Porsche 911 GT1 body shell brings a full racing outline to an RC chassis with clear polycarbonate construction and sharply molded exterior lines. The transparent finish shows the shell's contours before paint, while the compact competition profile, pronounced wheel arches and formed light shapes create a focused track look once mounted. The shell is supplied unpainted, leaving the colour scheme, masking layout and finishing approach open to the builder. Door outlines, side windows, hood vents, grille openings and roof contours are molded into the surface, giving panel details a clear guide during trimming and paintwork. Pre-cut body post mounting holes are already formed in the roof and rear section, which helps position the shell on a compatible chassis and reduces setup guesswork during fitting. The body is shown as the shell alone, making it a dedicated choice for custom RC builds rather than a complete ready-to-run vehicle. On the bench, the clear surface supports careful marking, cutting and paint planning around the molded lines. Once installed, the Porsche 911 GT1 form gives club running, shelf presentation and restoration projects a recognisable motorsport character centered on the body shape itself.

Body kits

Suzuki Swift Sport Body Set, RC bodyshell, 239mm

available in stores

This body set brings the compact, sporty lines of the Suzuki Swift Sport to 239 mm wheelbase M-chassis cars with a lightweight polycarbonate shell shaped for RC use. Molded exterior contours give the hatchback body a defined road-car character once it is cut, painted and finished, whether the car is built for track sessions or shelf display. The set is based on the body parts from the Suzuki Swift Sport kit 58679 and is offered separately in the spare parts range. Alongside the main shell, separate polycarbonate light cases allow more detailed treatment of the front and rear lamp areas, while white injection molded parts recreate the side mirrors as distinct add-on components. The clear shell format supports inside painting, and the included masking sheet marks out window and light sections before color is applied. A marking sticker sheet adds model-specific trim, window surrounds and exterior graphics to complete the finished car body. Compatibility is specified for 239 mm L wheelbase M-05, M-05 PRO, M-05 Ver.II PRO and M-07 Concept cars, making the set a focused choice for M-chassis conversions, replacement shells or a fresh body style for an existing setup. On a completed chassis, the short wheelbase hatchback proportions and separate detail parts create a clean, realistic silhouette with a strong road-going stance.