Colours/paints/airbrushes
With high-quality paints, varnishes and airbrush products, Tamiya brings vibrant colours and colourful variety to model making: for impressive and detailed results.
Colours/paints/airbrushes
With high-quality paints, varnishes and airbrush products, Tamiya brings vibrant colours and colourful variety to model making: for impressive and detailed results.
More
Brushes & accessories
Blunt Brush S, modeling brush for detail painting
300087029€2.69
Blunt Brush S is a modeling brush shaped for precise paint application on small parts, fine edges and narrow details. The slim bristle tip and light wooden handle create a direct, steady feel at the bench, whether working on trim lines, cockpit details, figure accents or careful touch-ups on miniature surfaces. The brush is presented as a single fine-detail tool rather than a broad coverage brush, which makes it suited to controlled paint pickup and measured strokes. The handle marking identifies it as TAMIYA MODELING BRUSH 000, a format commonly chosen for very small painted areas where larger brushes can flood recesses or soften sharp borders. Its blunt brush designation adds another point of distinction within a hobby setup built around different brush shapes for base coating, lining and finishing. On a model-making table, this brush fits the moments that call for patience and accuracy: picking out raised details, refining painted borders and adding small color notes after the main coat has dried. It also works well as a dedicated brush kept aside for delicate corrections, helping maintain cleaner separation between tiny painted sections. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Chipping Liquid 40ml, finishing material bottle
300087225€6.49
Chipping Liquid 40 ml is a finishing material for plastic models that creates realistic weathering by letting the top paint layer lift away in controlled areas. Applied between a lacquer base color and an acrylic overpaint layer, the water-based formula helps recreate chipped edges, worn panels and damaged paint surfaces that suit military subjects and other heavily used vehicle finishes. The process is specific and hands-on. A thin coat of the liquid is applied by airbrush or brush over the dried base color, then covered with the hull color. Water is added only where paint wear is wanted; this softens the layer so the top color can be peeled away with a toothpick or similar tool. Used carefully, that sequence makes it possible to place scratches and chips where traffic, contact or exposed edges would naturally wear through. Used tools can be washed with water after the session. The 40 ml square bottle fits neatly on the workbench for detail-focused finishing sessions and small batch paint work. This material is oriented toward advanced modelers and works best when the paint sequence is followed closely, as the top color does not peel after it has fully dried. Brushes are not included. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 0, modeling brush, 4 mm
300087015€2.19
Flat Brush No. 0 brings a narrow 4 mm painting edge to model and hobby work where clean borders and controlled coverage matter. The flat horse-hair bristles pick up paint across a straight edge, making it easier to guide color onto trim lines, compact panels and other small sections that benefit from an even pass. The short square-cut bristle shape creates a defined contact line, while the metal ferrule holds that profile firmly between handle and brush head. A wooden handle is designed to reduce strain on the hand, which helps keep movements steadier through longer painting sessions and repeated touch-up work. This combination of flat tip, No. 0 size and 4 mm width gives the brush a focused role in a painting setup alongside broader brushes and finer pointed tools. On a workbench, the brush suits edging, filling small rectangular areas and laying down smooth coats on model parts that need more coverage than a fine point can provide. It also fits careful finishing passes where a straight bristle edge helps keep paint placement tidy around molded details and panel boundaries. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 01, modeling brush, slim tip
300087028€1.99
Flat Brush No. 01 is a slim modeling brush built for careful paint application on small surfaces and sharply defined edges. The narrow flat bristle shape gives each stroke a clear contact line, which helps when covering compact sections that need more direction than a round tip can provide. The brush combines a light wooden handle, a silver metal ferrule and a small brown bristle head in a straightforward format suited to hobby bench work. Its flat profile lends itself to edging, short pull strokes and controlled coverage across narrow panels or trim areas. The slim head also makes it easier to place paint into tight sections while keeping the stroke width consistent. For model makers working on fine brushwork, that shape supports neat transitions between painted areas and more deliberate handling around corners and borders. On a workbench, Flat Brush No. 01 fits detail painting sessions where small parts, edge lines or compact surfaces need a measured amount of paint. It also works well as a dedicated brush for touch-ups and careful finishing passes on model projects where a broader head would be less exact. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 5, modeling brush, flat bristles
300087013€3.19
Flat Brush No. 5 is a modeling brush built for broader painted areas that still need a clean, controlled edge. The flat bristle shape lays paint down in straight passes, which helps when covering body panels, aircraft wings or other larger model surfaces with a more even finish. The brush combines a light wooden handle with a silver-coloured metal ferrule and short, light-coloured bristles. That construction gives a familiar balance for hobby bench work and keeps the working end compact enough for guided strokes along edges, corners and raised details. The No. 5 size sits between very fine detailing tools and wider coverage brushes, making it a practical choice when a project moves from small accents to larger painted sections. It can also be used for controlled application of weathering materials or similar finishing media where a flat edge helps place material in a measured band. On the workbench, this brush fits naturally into model painting sessions that alternate between coverage and control. It suits plastic model kits, scale vehicles, aircraft, figures and scenery pieces where broad areas, trim lines and surface finishing often appear in the same build. For hobby painting routines that rely on clean edges and repeatable strokes, the flat profile gives a clear, predictable contact area on each pass. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Flat Brush Medium, modeling brush, flat tip
300087215€10.79
The HG II Flat Brush Medium brings a broad, even painting edge to model work, with very fine PBT resin bristles shaped into a flat tip for smooth, soft brushstrokes. On body panels, interior parts and other flat sections, the medium width helps spread paint in a controlled band while keeping the stroke neat along edges. The brush combines white synthetic bristles, a metal ferrule and a long black handle with a squared end cap. Laser-engraved handle text identifies the HG II series and the medium size, with the size marking shown in Japanese. The handle material is solvent-resistant, a practical detail for sessions that involve hobby paints and common modeling solvents. At the end of the grip, a stopper helps keep the brush from rolling across the work surface and reduces the chance of the bristle tip being knocked out of shape. If that stopper is not needed, it can be cut off with side cutters. This flat brush suits coverage work that needs a cleaner edge than a round tip can provide, such as painting trim, raised details, larger flat areas or straight sections on scale models. It also fits bench setups where the brush is set down repeatedly between coats, washes or touch-up passes.
Brushes & accessories
HG II Pointed Brush Fine, modeling brush
300087218€9.99
The HG II Pointed Brush Fine is a round modeling brush built for controlled detail painting, with very fine PBT resin bristles that produce a smooth, soft brushstroke. Its narrow pointed tip suits careful work on small sections, whether tracing panel edges, refining painted parts or adding crisp color to tight areas on scale models. The brush combines a silver ferrule with a solvent-resistant handle designed for regular bench use. Laser-engraved TAMIYA MODELING BRUSH HG lettering and the size marking in Japanese are set directly into the grip, so the marking remains easy to identify during a painting session. At the rear, the grip end has a stopper that helps keep the brush from rolling across the work surface. If that feature is not needed, the stopper can be cut off with side cutters. On the workbench, the fine round profile supports measured paint pickup and careful placement in corners, along raised detail and around small molded features. It fits neatly into model finishing sessions that call for a soft stroke, a defined point and reliable handling between repeated dips, passes and touch-ups. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Pointed Brush Small, modeling brush
300087219€9.99
The HG II Pointed Brush Small brings a fine round tip and very fine PBT resin bristles together for controlled detail painting on models, figures and other small surfaces. Each stroke lands softly and evenly, which helps when paint needs to follow narrow edges, pick out recessed sections or cover compact areas with a light hand. The brush uses a black handle with a silver ferrule and laser-engraved markings that identify the Modeling Brush HG line and the size in Japanese. Its solvent-resistant handle material is suited to regular use around hobby paints and thinners used during bench work. The pointed shape supports careful line work, touch-ups and finishing passes where a broader brush would cover too much at once. At the rear, the handle end has a stopper that helps prevent the brush from rolling across the table, a practical detail when the tip has just been loaded with paint. If that stopper is not needed for a particular setup, it can be cut off with side cutters. On the workbench, the small format fits tasks such as edging trim, refining painted parts and adding crisp accents to scale builds where control matters as much as coverage. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Pointed Brush U Fine, modeling brush
300087216€9.99
The HG II Pointed Brush U Fine is a modeling brush built for detail painting where a clean tip and controlled stroke matter most. Its round profile and ultra-fine point support careful paint application on miniature features, fine edges and narrow recessed sections, while the very fine PBT resin bristles give the stroke a smooth, soft feel across the surface. The brush combines a slim handle with a metal ferrule and a pointed bristle shape that suits close, deliberate work at the bench. Laser-engraved markings on the handle identify the brush as MODELING BRUSH HG and show the size in Japanese, so the tool remains easy to distinguish within a paint setup. The handle material is solvent-resistant, a practical match for repeated use around hobby paints and cleaning routines. At the rear, the grip end has a stopper that helps keep the brush from rolling when it is laid down during color changes or detail checks. If that stopper is not needed, it can be cut off with side cutters. This makes the brush a focused choice for panel accents, tiny painted parts and other finishing work that depends on a stable hold and a consistently fine point. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Pointed Brush X Fine, modeling brush
300087217€9.99
The HG II Pointed Brush X Fine is a round modeling brush built for precise paint placement on small parts and narrow detail zones. Very fine PBT resin bristles create an extra-fine pointed tip with a smooth, soft brushstroke, making it well suited to careful line work, edge painting and small touch-ups on scale builds. The slim black handle pairs with a silver ferrule and a compact brush head that stays easy to position close to the work area. Laser-engraved markings on the grip read TAMIYA MODELING BRUSH HG together with the size in Japanese, so the brush can be identified quickly among other tools on the bench. The handle material is solvent-resistant, which suits regular use with hobby painting routines that involve paint and thinner contact. At the rear, the grip-end has a stopper that helps prevent the brush from rolling across the table and reduces the chance of the tip being damaged between painting steps. If that stopper is not needed, it can be cut off with side cutters. This makes the brush a focused choice for detail sessions such as picking out panel lines, trim sections and other small painted accents on models. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Rounded Flat Brush Small, modeling brush
300087224€9.99
The HG II Rounded Flat Brush Small brings a compact rounded flat profile together with very fine PBT resin bristles for precise paint application on model parts and other detailed hobby surfaces. Its small tip helps place colour cleanly along edges, into tight sections and across narrow panels where controlled coverage matters. The bristles have a slightly stiff feel, which supports steady stroke control while keeping the brush responsive in close work. A metal ferrule secures the bristle head to the handle, and the black solvent-resistant grip is shaped for comfortable handling during repeated painting passes. Laser-engraved markings on the handle identify the brush as TAMIYA MODELING BRUSH HG II and show the size in Japanese. At the end of the grip, a small tab helps stop the brush from rolling across the bench and lowers the chance of the bristle tip touching the work surface. This brush suits detail painting on scale models, miniatures and other small-format hobby projects where crisp edges and measured paint pickup are more useful than a wide stroke. The end tab can be removed with side cutters when a smooth handle end is preferred for storage or handling.
Brushes & accessories
HG II Rounded Flat Brush XS, modeling brush, PBT
300087223€9.99
The HG II Rounded Flat Brush XS is built for controlled detail painting, pairing a very fine rounded flat tip with PBT resin bristles that carry paint neatly into small areas. The slightly stiff bristle feel supports crisp placement on narrow edges, tiny parts and close finishing work, where a broader brush can leave too much paint behind. Its handle is made from solvent-resistant material suited to regular bench use with modeling paints and related liquids. A metal ferrule secures the bristle head, and the grip carries laser-engraved HG II series text plus the size marking in Japanese, so the brush can be identified quickly among other tools. At the end of the handle, a small tab helps keep the brush from rolling across the table and lowers the chance of the tip touching the work surface; the tab can be removed with side cutters when a smooth end is preferred. On model kits, miniatures and painted accessories, the XS shape suits careful touch-ups, fine borders and compact color areas that need a steady hand and a clean edge. It also fits finishing sessions where several brush sizes are laid out together and quick size recognition keeps the painting flow focused.
Brushes & accessories
High Finish Flat Brush Nr. 0, hobby paintbrush
300087046€5.79
The High Finish Flat Brush Nr. 0 is a slim hobby paintbrush built for careful, small-scale brushwork. Its narrow flat bristle shape supports crisp paint placement on edges, trim sections and compact surface areas, while the long black handle gives a balanced hold during slow, deliberate strokes. A silver metal ferrule secures the short orange bristles and keeps the working end compact, which helps when paint needs to stay within tight boundaries on model parts or craft details. The flat profile is useful for drawing straight passes across narrow sections, laying down thin coats and refining painted areas after broader coverage has been applied. In a painting setup with jars, palettes and small components on the table, the Nr. 0 size fits the moments that call for accuracy rather than wide coverage. This brush works well alongside detail painting, touch-up steps and finishing passes where a clean edge matters. On scale builds, diorama elements or craft pieces with small painted sections, the narrow head supports measured application and a tidy result. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Flat Brush Nr. 02, hobby paintbrush
300087045€5.79
The High Finish Flat Brush Nr. 02 is a precision hobby paintbrush made for careful work on scale models, miniatures and other small painted parts. Its narrow flat tip supports clean paint placement on edges, trim sections and compact surfaces where a larger brush can leave too much paint at once. The brush combines a long black handle, a silver metal ferrule and a small orange bristle head in a layout built for controlled hand movement. The flat profile helps guide short, even strokes across raised details and straight borders, while the slim head reaches confined areas that need a tidy finish. This makes the brush useful for touch-up work, thin coats and small decorative accents where brush width matters as much as paint quantity. The compact head also helps separate neighbouring painted sections when different colours meet on the same part. On the workbench, the brush suits careful finishing passes on body details, cockpit parts, figures, accessories and miniature scenery. It also fits paint correction tasks after masking removal or detail picking on corners and panel edges, where measured brush contact helps keep surrounding areas clean. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Flat Brush Nr. 2, hobby paintbrush
300087047€6.79
The High Finish Flat Brush Nr. 2 is a slim hobby paintbrush built for controlled, detail-focused painting. Its flat angled bristle tip creates a clear working edge, making it easier to place paint neatly along borders, corners and small surface sections while keeping strokes deliberate and even. The long black handle and silver metal ferrule give the brush a narrow profile that stays easy to guide in close work. That shape supports careful paint application on model parts, craft details and other small areas where a broader brush would cover too much at once. The angled tip also helps when shifting between edging and filling, so one brush can handle crisp lines as well as short, measured passes across compact surfaces. On the workbench, the Nr. 2 size fits painting sessions that call for accuracy rather than broad coverage. It suits touch-ups, trim work and controlled colour placement on smaller sections, where a steady edge and a slim handle help keep the brush tip in view throughout each stroke. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, fine hobby brush
300087049€5.79
The High Finish Pointed Brush, fine is built for detail painting where a very small tip and careful control matter most. Its pointed bristle shape places paint into narrow areas, fine lines and small accents with a more exact touch than a broader brush, making it well suited to miniature finishing, touch-up work and close visual detailing. The long black handle gives the brush a slim, balanced form that sits comfortably in the hand during short, deliberate strokes. A silver metal ferrule connects handle and bristles, helping the fine tip keep its defined shape while working around edges, recesses and other compact painted sections. The clean, minimal layout of the brush also makes it easy to position close to the surface when accuracy matters more than coverage. On a workbench, this brush fits the stages of a paint job that call for restraint rather than speed: picking out trim, refining borders, adding small highlights or correcting tiny areas after a broader coat has dried. It also suits careful craft and hobby tasks where a narrow pointed brush is the right tool for measured paint application. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, hobby brush, ultra fine
300087048€6.19
The High Finish Pointed Brush in ultra fine format is built for detail painting where a clean tip and controlled movement matter most. Its narrow pointed bristle shape supports careful paint placement on small features, whether the task is tracing a fine line, refining a painted edge or adding colour to compact recessed areas. The brush combines a long black handle with a silver metal ferrule and a very slim working tip. That layout keeps the grip clear of the painted surface during close work and helps guide short, deliberate strokes in confined spaces. On scale models, the ultra fine point is suited to cockpit details, trim lines, small fittings and other areas where a broader brush would spread paint too widely. It also fits touch-up work after masking, careful accent painting and other finishing steps that depend on a sharply defined point. Beyond model painting, the brush also suits arts and crafts tasks that call for a narrow tip and measured paint flow. It works well at a desk or hobby bench where detail, correction and neat edge work take priority over fast coverage, giving precise control for small-scale painting sessions. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, small hobby brush
300087050€5.79
The High Finish Pointed Brush, small is a fine hobby brush built for detail painting where a narrow tip and careful control matter most. Its pointed bristles support accurate paint placement on small parts, panel lines and tight edges, while the slim black handle and silver ferrule give the brush a clean, balanced working form for close hand movements. This small version suits tasks that call for measured paint pickup rather than broad coverage. The long handle helps guide short, deliberate strokes, and the pointed profile makes it easier to reach recessed areas or trace narrow borders with less spill into surrounding sections. The brush shape also supports touch-up work on painted assemblies, figure details and other miniature surfaces where a broader head would cover too much at once. On the workbench, this brush fits neatly into focused finishing steps such as edging, accent painting and refining small visual elements after base colours are in place. It also works well for careful line work on hobby and model projects that need a crisp, controlled tip instead of a wide brush face. Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush Basic Set, brush set
300087066€6.69
The Modeling Brush Basic Set brings 3 essential brush shapes together for model painting, giving a clear starting point for base coats, smaller sections and fine detail work at the bench. With Flat Brush No. 3, Flat Brush No. 1 and a small pointed brush in one set, the selection covers broad strokes, controlled edge work and precise paint placement on compact parts. The wider flat brush suits larger painted areas where even coverage matters, while the smaller flat brush helps guide colour along tighter sections and defined edges. The pointed brush is shaped for narrow lines, corners and delicate accents that call for a finer tip. Natural wood handles and metal ferrules give the brushes a classic workshop build, and the different brush profiles make it easier to switch between coverage and detail without interrupting the painting process. On scale models, miniature parts and other hobby painting tasks, the set supports steady progress from the first colour layer to the final touch-up. It works well as an entry set for brush painting sessions that need both surface coverage and careful detail control in a compact 3-brush selection. Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush HF Standard Set, brush set
300087067€15.79
The Modeling Brush HF Standard Set brings together 3 dedicated brushes for model painting, making it easier to move from larger painted areas to crisp finishing work with one coordinated set. The combination of High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush Ultra Fine supports clean coverage, controlled edges and very fine line work across detailed builds. The 2 flat brushes suit different stroke widths, so base colours, smaller panels and touch-up sections can be handled with a brush that matches the area being painted. The ultra fine pointed brush is shaped for narrow lines, tiny accents and careful work around small molded details. Each brush uses special synthetic hair specified for model painting, a material choice aimed at controlled paint pickup and steady transfer on miniature surfaces. Black handles, silver ferrules and clearly differentiated tip sizes also make the set easy to sort and reach for during longer bench sessions. On a worktable, the set fits naturally into painting stages such as base coating, edge definition and final detail passes on scale subjects. It also works well as a compact core brush selection for builders who want one set ready for regular finishing tasks instead of choosing separate brushes one by one. Warning! Not suitable for children under 14 years.
Brushes & accessories
Pointed Brush Medium, modeling brush with wood handle
300087016€2.89
The Pointed Brush medium is built for careful paint application where small details and clean edges matter. Horse-hair bristles form a fine pointed tip that helps place paint with accuracy on narrow sections, trim areas and delicate surfaces, while the wooden handle supports a steady hold during close work. Its slim profile suits hobby benches where controlled strokes count more than broad coverage. The pointed shape helps guide paint into small recesses, along panel lines or onto tiny raised details without flooding surrounding areas. The natural wood handle adds a familiar, balanced feel in the hand, and the strain-reducing design supports longer sessions spent refining miniature parts, model accessories or other detailed painted sections. On a model-making table, this brush fits the moments that call for patience and precision, from touching in small accents to sharpening edges after a base coat has dried. It also works well as a dedicated detail brush kept alongside broader brushes, ready for the final passes that define crisp, finished-looking results. Warning! Not suitable for children under 14 years.
Brushes & accessories
Pointed Brush Small, modeling brush for detail work
300087017€2.89
The Pointed Brush Small is made for detail painting where a broad stroke would overwhelm the surface. Its fine pointed tip helps place paint on narrow edges, recessed lines and small moulded sections, giving model work a cleaner, more controlled finish at the stage where accuracy matters most. The slim white handle keeps the brush easy to guide during short, careful movements. That shape suits tasks such as picking out cockpit controls, tracing trim, refining panel accents and touching in tiny areas after the main colour coat has dried. The pointed profile also helps when paint needs to reach corners or raised details without flooding the surrounding surface. For miniature and scale work, that control can make colour separation and final finishing more precise. On the bench, this brush fits the moments that call for patience rather than coverage: adding fine lines, correcting small sections and working through the last visual details that give a build its finished character. It also suits careful hobby painting on compact parts where a steady tip and measured paint application are more useful than a larger brush head. Warning! Not suitable for children under 14 years.
Brushes & accessories
PRO II Pointed Brush Fine, modeling brush
300087174€22.79
The PRO II Pointed Brush Fine brings a sharp, controlled tip to detailed paintwork on scale models, miniatures and other small-format hobby subjects. Its pointed brush shape helps place paint exactly where it is needed, whether tracing panel lines, defining edges or working into narrow corners where broader brushes can spread too far. This fine version sits within the Modeling Brush PRO II series and offers a slightly fuller profile than the most needle-like sizes shown in the range, making it useful when a detail brush still needs enough body to carry paint across small sections. The white tapered handle gives a balanced hold for close, careful movements, while the pale metal ferrule keeps the bristles gathered near the tip. That combination supports steady line work, tidy touch-ups and controlled coverage on compact surfaces where precision matters more than speed. On the bench, the brush suits cockpit details, trim lines, figure accents and other finishing steps that depend on a clean point and measured paint flow. It also fits sessions that move between outlining, edging and filling small shaped areas, keeping the same focused handling across each stage of model painting. Warning! Not suitable for children under 14 years.
Brushes & accessories
PRO II Pointed Brush Small, modeling brush
300087175€23.79
The PRO II Pointed Brush Small brings a shaped tip and steady handling to precise paintwork on scale models and miniatures. Its pointed brush head helps place colour on edges, trim sections and compact panels with more control than a broader general-purpose brush, while the white handle gives a clear visual line between grip and tip during close work. Within the Modeling Brush PRO II series, this Small version sits in the range for painters who need a little more coverage than extra-fine detail brushes. The fuller pointed profile can carry enough paint for short runs along borders and shaped sections, yet still narrows to guide careful placement in tighter areas. A pale metal ferrule secures the bristles and keeps the brush head compact, which helps maintain a defined working shape during detailed model painting. The printed designation on the handle identifies it clearly within the PRO II lineup for bench organisation alongside other tip sizes. On a painting table, the brush suits panel accents, cockpit details, figure accessories and other small sections where a clean edge matters. It also fits touch-up work between larger colour stages, when a compact pointed tip can reach confined spots without switching to an ultra-fine liner. Warning! Not suitable for children under 14 years.
Brushes & accessories
PRO II Pointed Brush Ultra Fine, modeling brush
300087172€20.29
The PRO II Pointed Brush Ultra Fine is a modeling brush made for exact paint application on the smallest areas of a scale build. Its sharply pointed tip helps place color on fine edges, narrow panel lines and tiny molded details, where a broader brush can quickly flood the surrounding surface. The slim white handle tapers gently, giving a steady grip for short, deliberate movements during detail painting. A pale metal ferrule secures the bristles and keeps the working end compact, which helps when painting instrument panels, trim, figure details or other closely spaced sections. Within the Modeling Brush PRO II series, this Ultra Fine version is the most focused option for line work and very small accents. It suits careful finishing stages on cars, aircraft, figures and other scale subjects where crisp separation between painted areas matters. Used with thin coats, washes or touch-up color, the pointed shape supports neat correction work and controlled coverage in places that are difficult to reach with a larger brush. Warning! Not suitable for children under 14 years.
Brushes & accessories
PRO II Pointed Brush X Fine, modeling brush
300087173€21.49
The PRO II Pointed Brush X Fine is a modeling brush built for precise paint application on scale models and other detailed hobby work. Its narrow pointed tip helps place color exactly where it is needed, whether tracing panel lines, defining edges or working into very small sections where a fuller brush would spread paint too widely. The brush belongs to the Modeling Brush PRO II range and is shaped around close-control handling rather than broad coverage. A white tapered handle gives a clear, balanced grip for short strokes, careful outlining and controlled touch-ups. The fine point supports detail painting on miniatures, trim sections and recessed areas that need a steady approach. The pale metallic ferrule secures the bristles close to the tip, keeping the working end compact for accurate movement around tight contours and corners. On the workbench, this brush fits tasks such as accenting molded lines, refining painted borders and adding small color details after larger areas are complete. It also suits layered finishing steps where a narrow point helps keep neighboring sections clean while building up detail gradually. Warning! Not suitable for children under 14 years.
PS spray paints
PS-XX Dark Blue Polycarbonate Spray Paint 100 ml
300069944€12.49
PS-XX Dark Blue is a 100 ml spray paint for polycarbonate bodies, made for model shell finishing where the coating needs to match the body material. The dark blue shade gives RC bodyshell projects a strong, even color base that reads clearly on curved fenders, roof sections and side panels. As part of the PS paint range, this spray is intended for use on polycarbonate shells rather than general household surfaces. That material focus matters during body preparation, because RC shells flex and carry molded contours, window lines and wheel arch shapes that need a coating suited to the substrate. The 100 ml content gives useful capacity for complete coverage on many shell layouts and also supports follow-up work such as reinforcing color depth in selected areas. In multi-step paint schemes, Dark Blue can serve as the main body color or as one section within a masked design. On the bench, the can fits naturally into body finishing work for touring cars, buggies or other RC shell projects that use polycarbonate. It suits fresh builds, replacement bodyshells and repaint work where a defined dark blue tone is needed for a clean, model-focused finish.
Diorama texture paints
TextureClaySoil Brown, diorama clay, 150g
300087221€14.49
TextureClaySoil Brown brings shaped ground relief to diorama bases with a pre-colored brown clay that is made for soil effects rather than a flat painted surface. The 150 g pack suits scenes across a wide 1/6 to 1/48 scale range, where uneven earth, ruts and worked terrain help a vehicle or figure sit more naturally in the setting. The water-based formula limits odor and helps limit dirt on hands during longer shaping sessions. Numerous colored particles in the clay support a more natural soil look, and the surface can be worked directly after kneading the bag contents. A thin layer of bond is applied to a rigid display base first, then the clay is spread over it and textured with stiff brushes to form irregular ground. Tracks and tires can be pressed into the surface to depict traces, and Brown can be mixed with Dark Earth to shift the tone across the base. The clay is not adhesive like putty, so cement or wood glue is required separately. Solvent cement and instant cement are not suitable. Drying takes about 2 to 7 days. On military scenes, vehicle displays or figure settings, the clay helps turn a plain base into terrain with visible depth and contact marks. It also suits compact groundwork studies where brush texture, wheel impressions and mixed earth tones define the final scene. Warning! Not suitable for children under 14 years.
Diorama texture paints
TextureClaySoil DarkEarth, diorama clay, 150 g
300087222€14.49
TextureClaySoil DarkEarth is a 150 g diorama clay for building realistic ground texture on scenic bases and model displays. The dark earth colour and the numerous coloured resin particles work together to give the surface a soil-like appearance, while the clay body can be shaped into bumps, shallow depressions and broken terrain that look less flat than a plain painted base. This modelling material is aimed at groundwork rather than fine structural parts. Spread across a base, it helps establish the landform under vehicles, figures or military scenes before further detailing is added. The mixed particle content creates visible variation through the surface, which helps earth sections avoid a uniform finish. Because the compound is already coloured in a dark earth tone, the base starts with a terrain-appropriate look even before weathering powders, grass or other scenic materials are applied. On a tank display, the clay can define churned soil around the running gear area and shape the rise and fall of the ground beneath the hull. On a small vignette or larger diorama, it supports rough paths, embankments and irregular field surfaces that give the scene a more convincing setting. Warning! Not suitable for children under 14 years.
Attachment parts
VW Golf II GTI/Rally, model parts, H bumper
319007434€9.19
This H parts set for the VW Golf II GTI/Rally focuses on exterior detailing with black bumper components that help restore the correct look of the body shell or complete a fresh build with matching trim. The sprue layout keeps each section connected before cutting, making it easier to identify the required pieces at the workbench and prepare them for fitting. Alongside the bumper elements, the frame also carries smaller exterior parts that support a more complete finish. Mirror-style pieces, round lamp-style housings and compact mounting arms add further body details drawn from the same moulded set. The black material suits builds that need dark trim straight from the frame, while the attached layout helps with part handling before cleanup and installation. For repair projects, the set can replace missing or damaged exterior sections without changing the rest of the body configuration. On the bench, these parts fit naturally into body restoration, detail correction or a careful rework of an existing shell. They also suit a stored kit that needs fresh trim parts before painting, final assembly or display in completed form.
Polish, cleaners, aging materials
Weathering Sponge Brush Fine, model tool
300087084€6.19
The Weathering Sponge Brush Fine brings a precise applicator shape to close, detailed finishing on scale models. Its fine white sponge tip reaches small edges, narrow sections and tight surface areas where broad tools can leave too much material, making it suited to subtle weathering passes and controlled blending. A silver metal ferrule secures the sponge tip to a tapered black handle, and the longer handle gives a balanced hold for short dabbing motions and careful directional strokes. The brush is specially designed for use with Weathering Master material, so pigment can be picked up, placed and softened in small amounts rather than spread in a heavy patch. This makes it useful for building worn highlights, dusty corners, shaded panel lines and light grime effects step by step. On military subjects, road cars, motorcycles or rail models, the fine tip helps place weathering exactly where surface detail needs extra depth. It also suits touch-up work after the main paint stage, when small marks, edge wear and blended transitions can change the overall finish of a model without covering the underlying detail. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Sponge Brush Medium, hobby tool
300087083€6.19
The Weathering Sponge Brush Medium is a hobby finishing tool made for detailed weathering work on scale models and similar surfaces. Its oval sponge tip applies Weathering Master material with a soft, controlled touch, so shading, dust effects and worn edges can be built up in small steps instead of landing as a hard brush mark. A resilient sponge head changes how weathering material meets the surface. Dabbing creates broken, natural-looking texture, while light sweeping or tapping helps blend pigment into corners, raised detail and recessed lines. The tapered black handle and silver ferrule keep the brush balanced in the hand, and the printed Medium designation makes it easy to distinguish from other sizes on the workbench. This version sits between pinpoint application and wider coverage, which helps when a finish needs both control and visible spread. On vehicle bodies, aircraft panels, armour sections or diorama parts, the brush supports rust tones, road grime, soot effects and subtle fading with a measured application pattern. It suits finishing sessions where repeated passes matter, whether adding a faint dusty edge around vents or building heavier deposits around seams and textured surfaces. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-1 Flat Black, acrylic paint, 23 ml jar
300081301€5.491 l = €238.70
XF-1 Flat Black is an acrylic paint for scale model finishing, supplied in a 23 ml jar and suited to the deep matte areas that give a build visual weight. The flat black tone fits naturally on chassis sections, cockpit parts, mechanical details and shadowed recesses where a reflective surface would break the scale effect. The acrylic formula supports careful brushwork on small parts and controlled coverage across larger painted sections. On military subjects it can define tools, tracks and interior sections; on cars it suits undersides, trim areas and engine bay details; on aircraft it works well for cockpit elements and selected panel accents. The 23 ml jar size keeps a frequently used workshop colour close at hand for repeat touch-ups, layered weathering steps or fresh contrast on newly added parts. At the bench, Flat Black often becomes one of the first colours opened and one of the last used for final corrections. It suits focused detailing sessions as well as broader finishing work, giving model builders a reliable matte black shade for projects that call for depth, separation and crisp visual definition.
XY acrylic colours
XF-2 Flat White, acrylic paint, 23 ml jar
300081302€5.491 l = €238.70
XF-2 Flat White is an acrylic paint for model work, supplied in a 23 ml jar and formulated for brush application. The matte white color gives scale builds a clean, non-gloss finish that suits everything from small cockpit details to larger painted sections, with the jar size keeping enough paint on hand for repeat use across a project. The paint is identified as XF-2 Flat White in the Tamiya acrylic range, making it easy to match with build notes, color plans and established hobby paint references. The safety data names it as a liquid paint with a flash point of 33°C and a density of 1.2 g/mL at 23°C. The listed appearance is white with an alcohol odor. For handling, use in well-ventilated areas and keep away from heat, sparks and open flames. Protective gloves and eye protection are stated in the safety information. On the bench, this color fits careful brushwork on model bodies, interior sections, figures, scenery details and repair spots where an even matte white is needed. The 23 ml format also suits keeping a standard white ready between sessions for touch-ups, layered coverage and consistent finishing across multiple builds.
XY acrylic colours
X-11 Chrome Silver Gloss, acrylic paint, 10 ml
300081511€3.591 l = €359.00
X-11 Chrome Silver Gloss brings a bright metallic finish to plastic model building, with a brush paint format that suits controlled work on small parts and defined sections. The 10 ml jar size keeps the paint easy to handle during detail painting, whether the focus is trim, cockpit elements or mechanical accents that need a reflective silver tone. This acrylic paint is identified as X-11 and described as Chrome Silver Gloss, giving model builders a specific shade for metallic highlights rather than a general silver. The paint is supplied as a liquid brush colour, which makes it suitable for placing colour into recesses, along edges and across moulded detail where precision matters. The safety data identifies the mixture as flammable and states that it should be used in well-ventilated areas. The same documentation describes a density of 1 g/ml at 23°C and a flash point of 31-33°C. On the bench, this colour suits small finishing steps that change the look of a build, such as picking out grilles, trim strips or interior parts with a brighter metallic contrast. It also works for touch-up tasks when a model needs a consistent chrome silver gloss across separate painted sections.
PS spray colours
PS-5 Black, polycarbonate spray paint, 100 ml
300086005€10.991 l = €109.90
PS-5 Black brings a dedicated spray format to polycarbonate model finishing, combining a deep black colour with the quick, even coverage of an aerosol can. The 100 ml content gives a usable amount for coating bodyshell sections, laying down backing coats or refining darker design areas on compatible model parts. This paint is identified for polycarbonate, which matters when the surface calls for a formula intended for that material rather than a general craft coating. The spray can format helps cover curved panels, roof sections and side areas with a continuous pass instead of brush marks. Black also plays several concrete roles in model finishing, from solid single-colour bodies to contrast sections, window borders and visual depth behind brighter outer colours. The compact can size stores easily with other workshop supplies while keeping the colour reference simple through the PS-5 designation. On the bench, PS-5 Black fits paint preparation for RC bodyshell projects, replacement shells and detail-led custom schemes. It also suits repeat finishing sessions where the same black tone is needed across separate polycarbonate parts or later repaint work. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-18 Semi Gloss Black, acrylic paint, 10 ml
300081518€3.591 l = €359.00
X-18 Semi Gloss Black is an acrylic brush paint for plastic model building, supplied in a 10 ml jar for controlled application on smaller parts and focused paint sessions. The semi gloss finish gives black surfaces a measured sheen that reads cleaner than flat black and less reflective than full gloss, which helps shaped details stay visible under light. This paint is identified as X-18 and described as black with a semi gloss character, making it useful for trim, cockpit sections, mechanical parts and other areas where a solid dark tone needs a subtle surface highlight. The liquid formula is supplied as a brush paint rather than a spray, which supports careful work around edges, recesses and molded detail. On mixed-color builds, the black tone also works as a visual separator between neighboring parts and markings. The compact 10 ml size keeps the jar easy to store alongside other modeling colors and practical for projects that need targeted coverage rather than large-area coating. At the workbench, the jar format suits short painting steps between assembly stages, weathering passes or final detail corrections. It fits builders who paint figures, vehicle interiors, accessories or exposed components and need a dependable black with a restrained sheen for repeated finishing tasks.
XY acrylic colours
X-20A Acrylic Thinner 250ml, paint thinner
300081040€12.791 l = €51.16
X-20A Acrylic Thinner 250 ml is a dedicated thinner for Tamiya acrylic and polycarbonate colors, giving model painting work a controlled way to adjust paint behavior before it reaches the brush or airbrush. The bottle format keeps the liquid ready at the bench for measured mixing during body finishing, detail painting or touch-up work. The formula is identified in the safety data as a solvent in water, with propan-1-ol listed among the components. The bottle carries a ribbed screw cap for secure closure between sessions, and the 250 ml fill volume suits repeated use across multiple painting stages. Label information also states Conforms to ASTM D4236. For handling, the container is marked as flammable and specifies use in well-ventilated areas, with eye protection required. The liquid is colorless and has a solvent odor. On a model bench, X-20A can be kept alongside paint jars for mixing smaller amounts for fine lines or larger batches for broader coverage, depending on the painting task at hand. The 250 ml size also makes it a useful refill option when paint preparation and cleanup are part of regular building and finishing routines. Warning! Not suitable for children under 14 years.
Primers
Fine Surface Primer L, primer spray, white 180 ml
300087044€14.791 l = €82.17
Fine Surface Primer L is a white primer spray in a 180 ml aerosol can, made for preparing model surfaces before painting. The white tone creates a bright undercoat that supports clean colour development on later layers, while the spray format helps reach broad panels and shaped parts with the same coating step. The can is specified for plastic, metal and wood, which makes it suitable for mixed-material model work without changing to a different primer type. The formulation is described as a primer or pre-paint coating, so its role is surface preparation rather than the final colour finish. On body panels, housings or scratch-built sections, the white base can help lighter paint shades keep their intended tone instead of being dulled by a darker substrate. The aerosol format also suits parts with edges, recesses and angled surfaces that are awkward to cover evenly with a brush. According to the supplied safety data, the contents are binders, pigments and solvents in a pressurised can. This spray fits naturally into model painting sessions where separate parts are primed before the colour coat, and it also suits touch-up work on metal or wood components that need the same white base. Use is intended outdoors or in well-ventilated areas, as stated in the safety documentation. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-56 Flat Metallic Grey, acrylic paint, 10 ml
300081756€3.591 l = €359.00
XF-56 Flat Metallic Grey is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps the quantity focused on detail painting, touch-ups and smaller painted sections. The flat metallic tone combines a subdued grey base with a restrained metal effect, giving mechanical parts, body details and equipment surfaces a more technical look than a plain solid grey. Within a paint lineup, a shade like Flat Metallic Grey is useful where a bright silver would appear too reflective and a non-metallic grey would look too flat. The acrylic format supports controlled application on narrow edges, recessed areas and picked-out components. On military subjects, vehicle details and machinery sections, the colour can help separate metal parts visually from surrounding panels. The 10 ml size also suits bench storage, colour rotation and project-specific paint selection without committing to a larger volume. On the workbench, XF-56 can be used for careful brushwork on vents, housings, brackets or trim where a muted metallic note adds depth. It also fits finishing sessions that focus on selective accents, repairs or colour correction across an existing model scheme.
XY acrylic colours
X-27 Clear Red Gloss, acrylic paint, 10 ml
300081527€3.591 l = €359.00
X-27 Clear Red Gloss brings transparent red colour to plastic model building, adding a glossy tinted finish that leaves moulded detail and surface structure visible beneath the coat. The acrylic paint format suits careful brush application on small sections where a solid opaque layer would hide the part's shape. The 10 ml content works well for repeated detail sessions on lenses, light units and other clear accents across multiple builds. As a clear gloss shade, it is suited to parts that need colour while still showing the form underneath, rather than covering them with a flat block of pigment. The paint is supplied in liquid form and is identified as X-27 within the X-Acrylic range. The safety data names it as a glossy special acrylic resin paint for plastic model building. On the bench, this shade fits focused finishing work such as colouring rear light sections, transparent inserts or small decorative areas that need a red gloss effect. It can also be kept alongside other modelling paints for touch-up work when a build calls for a transparent colour layer instead of an opaque coat.
XY acrylic colours
X-26 Clear Orange Gloss, acrylic paint, 10 ml
300081526€3.591 l = €359.00
X-26 Clear Orange Gloss brings a transparent orange tone to plastic model building, combining colour tinting with a gloss surface that works well on small visual accents and clear effect areas. In a 10 ml jar, the paint quantity stays practical for bench use, whether the task is refining light lenses, adding warm transparent shading or adjusting selected body details. This X-Acrylic paint is identified in the safety data as a glossy brush paint for plastic model building and is supplied as a liquid mixture of binders, pigments and solvents. The clear orange character allows underlying moulded detail to remain visible instead of covering it with an opaque coat. A density of 1.0 g/ml is stated in the data, and the solvent content is listed at 50 - 60%, pointing to a fluid paint structure suited to thin, even application. The alcohol-like odour and flammable classification also make clear that careful handling and good ventilation belong to workshop use. On the modelling table, the 10 ml format fits short painting sessions, correction work and colour matching across separate parts without committing to a large container. It suits builders working on vehicle lights, transparent inserts and other small sections where a glossy tinted finish helps the painted area stand out with clean, focused colour.
XY acrylic colours
XF-16 Flat Aluminium, acrylic paint, 10 ml
300081716€3.591 l = €359.00
XF-16 Flat Aluminium is an acrylic paint for scale modelling work, supplied in a 10 ml jar for controlled use on smaller sections and precise finishing tasks. The flat metallic tone suits areas that call for an aluminium appearance with a subdued surface, such as structural details, trim sections or mechanical elements that should avoid a glossy look. The acrylic formula makes this colour a practical choice when a build calls for careful brushwork, edge definition or touch-up passes after main painting is complete. A 10 ml jar also helps keep the shade manageable on the bench, with enough paint for repeated detail sessions while staying easy to store alongside other modelling colours. The Flat Aluminium tone can be used to separate metal parts visually from surrounding body colours, interior sections or darker assemblies, giving small components clearer contrast on the finished model. On military subjects, road cars, motorcycles or workshop accessories, this shade fits naturally into painting sessions where bolts, housings, panels or exposed metal sections need a restrained metallic character. It also works well for revisiting earlier builds, correcting small marks or adding final accents once the main colour scheme is already in place.
XY acrylic colours
X-1 Black Gloss, acrylic paint, 10 ml jar
300081501€3.591 l = €359.00
X-1 Black Gloss brings a dense black tone and a reflective finish to plastic model building, with a 10 ml jar size that suits careful brush work on smaller sections and defined details. The X-Acrylic resin formula is intended for scale modelling tasks where trim, interior parts or selected exterior areas need a clean gloss surface rather than a flat look. The black gloss shade can be used to pick out contrast on cockpit elements, frame sections and other painted components where a darker finish helps visual separation. In the safety data provided for this paint range, the mixture is described as liquid, with pigments, binders and solvents, and a density of 1.0 g/ml at 23 °C. The same document identifies a flash point of 31 to 33 °C and lists the paint as flammable, so handling belongs in well-ventilated conditions and away from heat sources. For storage and workshop planning, the jar format keeps a small measured quantity ready for repeat sessions on ongoing model projects. On the bench, this colour fits jobs such as edging, retouching and finishing selected parts after main assembly or base coating. It also works where a gloss black layer is needed before further detailing on plastic model components. Paint is supplied in 1 jar with 10 ml content.
TS spray colours
TS-13 Clear Gloss 100 ml, paint spray, clear coat
300085013€10.491 l = €104.90
TS-13 Clear Gloss is a 100 ml clear coat spray for model finishing, designed to add a transparent gloss layer over painted surfaces while leaving the underlying colour visible. The aerosol format supports fast, even coverage across larger sections such as bodyshells, body panels and other exterior parts where a uniform sheen matters. The formula is identified in the supplied data as a special acrylic resin spray, and the can is marked for plastics, making it suitable for plastic model work. Applied in light coats, the clear layer helps bring separate painted sections into a more consistent overall finish and can visually unify decals and colour areas under one glossy surface. The spray can format also suits broad curves and recessed shapes that are slower to cover with a brush. REACH declaration data states that this version does not contain substances of very high concern above 0.1% according to the ECHA Candidate List. For model builders working on car bodies, fairings or other display surfaces, TS-13 Clear Gloss adds the final reflective layer that completes the painted look. The can should be shaken vigorously before use and sprayed in a well-ventilated area, with attention to the hazard guidance shown for flammability and irritation. Warning! Not suitable for children under 14 years.
PS spray colours
PS-1 White, polycarbonate spray paint, 100 ml
300086001€10.991 l = €109.90
PS-1 White brings a dedicated spray paint option to polycarbonate model work, with a 100 ml aerosol format that suits clear RC bodyshells and other compatible parts. The white tone gives shells a crisp, high-contrast finish that stands out on track layouts, display shelves and custom builds alike. The formula is specified for polycarbonate, which matters when painting flexible model bodies that need the right type of coating. The aerosol can lays paint over broad roof sections, curved fenders and narrow contour lines with a continuous spray pattern that is difficult to match with a brush. White also works across several finishing approaches: as a full body colour, as a bright backing coat behind other colours, or as a clean base under decals and racing graphics. In model projects with layered paint plans, that flexibility in colour use helps keep the finish clear and readable. This spray paint fits naturally into RC body preparation, repaint work and fresh custom schemes. It can be used when refreshing a well-run bodyshell, finishing a newly cut shell or setting up a motorsport-inspired livery with strong contrast and clear panel definition. Paints are required separately. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-10 Gun Metall Gloss, acrylic paint, 10 ml
300081510€3.591 l = €359.00
X-10 Gun Metall Gloss brings a dark metallic tone to scale model finishing, with a 10 ml jar size that suits detail painting, touch-ups and smaller painted sections. The acrylic brush paint format gives controlled application on parts where a metallic surface needs definition rather than a broad overall coat. The Gun Metall shade works well on mechanical-looking areas, trim pieces and surface details that benefit from a darker reflective finish. As a liquid paint mixture with pigments and binders, it is intended for model building use and supports careful colour placement on selected sections of a build. The compact jar size stores easily alongside other workshop colours and keeps a focused amount ready for repeated detail sessions. The gloss finish adds a cleaner light-catching effect than a flat coat, which helps metallic accents stand apart from surrounding colours. On a workbench, the 10 ml format fits neatly into paint racks, tray setups or small hobby spaces where quick access matters during painting stages. It suits builders refining panel sections, equipment details or small exterior parts, especially when a darker metallic note completes the final look of the model.
Primers
Fine Surface Primer L, spray primer, light gray
300087064€14.791 l = €82.17
Fine Surface Primer L in light gray prepares model parts for painting with a smooth, fine undercoat that suits detailed work and larger assemblies alike. The aerosol can delivers 180 ml and is identified for use on metal, wood and model plastics, making it a practical choice when one build combines several materials. The light gray shade gives a neutral base before colour coats and helps surface work stand out during preparation. Sanded seams, filled areas and small imperfections are easier to spot on a uniform primer layer than on bare mixed materials. As a primer and pre-paint coat, it supports cleaner colour application on body panels, structural parts and scratch-built sections where an untreated surface can vary from piece to piece. The spray format also helps reach angled edges, recessed details and irregular shapes with a more continuous coat than hand application on the same geometry. On the bench, the can fits the usual sequence of surface prep, priming and painting for scale models and hobby builds. It can be used when separate metal fittings, wooden sections and plastic components need the same visual starting point before the finish coat goes on. Warning! Not suitable for children under 14 years.
TS spray colours
TS-26 White Gloss, spray paint, 100 ml aerosol
300085026€10.491 l = €104.90
TS-26 White Gloss brings a bright solid tone and a reflective finish to model painting, with a 100 ml aerosol format that suits broad, even coverage on plastic parts. The spray can layout supports fast colour application across body sections and shaped components where a brush can leave visible stroke patterns. The can is identified as a special acrylic resin spray within the TS paint range, giving model makers a dedicated finishing option for hobby work. Visible use guidance on the can recommends shaking vigorously and applying light coats from 25 to 30 cm, a method that helps the paint build up in controlled layers rather than flooding fine contours. The gloss white shade works well where a clean, high-contrast surface is needed for racing liveries, civil vehicle finishes or custom colour schemes. The 100 ml fill also gives enough material for repeated passes across larger shells, wings or body panels in one painting session. On the bench, the aerosol format fits projects that move from primed parts to final colour with minimal interruption. It can be used when separate model sections need a uniform white coat before decals, trim painting or display finishing, keeping the overall look crisp and consistent across matched parts. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-11 Chrome Silver Gloss, acrylic paint, 23 ml
300081011€5.491 l = €238.70
X-11 Chrome Silver Gloss brings a bright metallic silver tone to model surfaces with a gloss finish that catches light across trim, panels and small accent parts. The 23 ml jar suits repeated brush-paint work on plastic model building projects where a reflective chrome effect is needed on selected details. This acrylic brush paint is identified as a liquid mixture of pigments, binders and solvents. The safety data names it for plastic model building and lists a density of 1 g/mL at 23°C, with a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The colour is silver and the odour is alcohol. These material characteristics matter during careful bench work, where thin edges, raised moulded parts and small surface sections call for controlled paint pickup and steady coverage rather than broad spray application. Used on model trim, mechanical accents or highlighted body sections, the gloss metallic finish helps separate fine visual details from surrounding colours. For handling, the safety data states that the paint is flammable and should be used in well-ventilated areas, with vapour and aerosol inhalation avoided and eye protection worn.
XY acrylic colours
X-7 Red Gloss Acrylic Paint, 10 ml hobby color
300081507€3.591 l = €359.00
X-7 Red Gloss Acrylic Paint brings a vivid red tone and a reflective gloss finish to plastic model building, giving body panels, trim pieces and small accents a clean, defined colour presence. The 10 ml jar suits bench setups where controlled amounts, repeat access and careful brush work matter during painting sessions. This X-Acrylic paint is identified as X-7 Red Gloss and is intended for plastic model building. The formula is a liquid mixture of binder, pigments and solvents, with a density of 1.0 g/ml at 23 °C. In use, the gloss surface helps light catch edges, raised details and shaped contours, so colour placement reads clearly on finished assemblies. The small jar format also fits neatly into organised paint racks, tool drawers or compact hobby cases where individual colours need to stay easy to sort and quick to reach. On the workbench, the 10 ml size suits detail passes on mirrors, spoilers, cockpit parts or highlighted body sections without opening a larger container than the task requires. Between main colour coats, correction work and final finishing touches, the red gloss shade gives model builders a focused paint option for precise, repeatable colour work on plastic parts.
TS spray colours
TS-14 Black Gloss, spray paint, 100 ml
300085014€10.491 l = €104.90
TS-14 Black Gloss is a 100 ml spray paint for model finishing, combining a deep black tone with a gloss surface that suits body shells, exterior panels and other visible parts. The aerosol format covers wider areas quickly, making it useful when a model needs an even sprayed coat rather than brush marks. This TS paint is described as a special acrylic resin spray and is presented for plastic model use. Light coats can be built up across curved sections, edges and recessed areas, which helps keep the finish visually consistent on shaped parts. The can label identifies it as TS-14 and marks the net volume as 100 ml. The safety data for this aerosol classifies it as an extremely flammable aerosol under pressure, with storage and handling precautions that belong to workshop use. The same documentation also identifies the mixture as containing binders, pigments and solvents in a pressurised can. On the bench, this kind of spray paint fits body preparation, colour coating and final exterior finishing on scale builds where a gloss black surface is part of the look. It can be used when separate parts need the same colour match across the model, or when larger plastic sections call for a sprayed finish with steady visual coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-29 Semi Gloss Black, spray paint, 100 ml
300085029€10.491 l = €104.90
TS-29 Semi Gloss Black brings a controlled black finish to model work with a 100 ml aerosol can and a semi gloss surface effect that sits between flat and full gloss. The special acrylic resin formula is made for plastics, making it a practical choice for colouring body parts, panels and other compatible model sections where an even sprayed coat matters. The aerosol format changes how the paint reaches the surface: instead of loading a brush, the colour is sprayed across wider areas in a continuous mist, which helps keep the finish more uniform on broad panels and curved shapes. Semi Gloss Black suits builds that need a darker tone with a slight sheen rather than a fully reflective look. The can is part of the TS paint range, a line used for model finishing where colour accuracy and surface appearance shape the final look of the build. The 100 ml net volume also gives useful capacity for larger shells or several smaller parts within one project. On the bench, TS-29 fits body painting, panel work and colour matching across separate components in the same build. It also works well when a project calls for black trim, darker accent sections or a consistent repaint of replacement parts on compatible plastic models. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-1 Flat Black, acrylic paint, 10 ml jar
300081701€3.591 l = €359.00
XF-1 Flat Black is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps a frequently used colour close at hand for repeat sessions at the bench. The flat black tone gives painted areas a non-reflective finish, which suits parts that need a muted, technical look rather than a glossy surface. Within a model build, black often carries visual structure, and this shade can be used where contrast, shadow definition or dark base coverage is needed. The 10 ml size is easy to store alongside other workshop colours and suits focused jobs such as cockpit sections, chassis details, trim areas or small accessories. As an acrylic paint, XF-1 fits modelling routines that rely on measured application and controlled coverage on selected sections rather than broad household painting tasks. On military subjects, automotive replicas, aircraft kits or figures, flat black helps pick out recesses and mechanical forms with a restrained finish. Kept on the bench for regular touch-up work or used as a dedicated detail colour during a full build, XF-1 supports neat, deliberate painting across many scale modelling contexts.
XY acrylic colours
XF-63 Flat German Grey, acrylic paint, 23 ml
300081363€5.491 l = €238.70
XF-63 Flat German Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-63 colour code. The flat grey tone gives scale surfaces a muted, non-gloss look that suits military subjects, equipment details and technical builds where a matt finish is part of the visual character. The jar format keeps the paint easy to store between sessions and simple to bring back into use for follow-up work on the same build. On smaller components, the controlled quantity supports careful coverage on edges, panels and detail areas where colour placement needs to stay precise. The clearly stated shade name also helps when a build calls for the same tone across separate stages, whether the work focuses on base coating, detail accents or later corrections. On the bench, XF-63 Flat German Grey fits naturally into painting sequences that move between larger body sections and finer parts. It also suits projects that need a restrained grey for machinery, accessories or weathered finishes, keeping the overall look even across repeated applications.
Lacquer colours
Lacquer Thinner 250ml, model paint thinner
300087077€12.591 l = €50.36
Lacquer Thinner 250ml supports model painting with one bottle for paint preparation, spray mixing and tool cleanup. The 250 ml format suits regular bench use, whether lacquer paints need a smoother brushing consistency or an airbrush mix needs a more controlled flow across small parts and larger body sections. The label states a 2:1 mixing ratio for airbrush application, giving a concrete reference for preparing lacquer paints and liquid surface primer for spray work. The thinner is also intended for Tamiya putty, which helps when surface filling and finishing need a matching solvent on the workbench. Brushes and painting tools can be cleaned of oil and paint residue with the same bottle, so colour changes and end-of-session cleanup stay within the same workflow. For heavier soiling, the printed instructions note a longer soak before rinsing with clear water. On a model bench, that means one thinner can move between mixing cup, airbrush routine and brush care without switching materials mid-session. The screw-cap bottle stores compactly beside paints, primer and putty, ready for detail painting, surface preparation and cleanup after the final coat.
XY acrylic colours
XF-15 Flat Flesh, acrylic paint, 10 ml
300081715€3.591 l = €359.00
XF-15 Flat Flesh is an acrylic paint in a 10 ml format, sized for focused colour work on scale models and painted details. The flat finish gives the shade a muted surface look that suits areas where a non-gloss appearance is needed, whether on figures, interior sections or small scene elements. The XF designation identifies this colour within the Tamiya paint range, which helps keep shade selection consistent across multi-step painting work. The Flat Flesh tone can be used where skin-colour accents, character parts or subtle warm highlights need a controlled matte result. The compact jar size also fits neatly into a bench setup with other modelling supplies, keeping frequently used colours close at hand during painting sessions. On a worktable, this paint suits careful brush-led application for edges, recessed sections and other small zones that benefit from measured colour placement. It also works well for touch-up tasks between larger painting stages, when a specific tone is needed without opening a bigger paint volume.
TS spray colours
TS-17 Aluminum Silver Gloss, spray paint, 100 ml
300085017€10.491 l = €104.90
TS-17 Aluminum Silver Gloss is a 100 ml spray paint for model finishing, built to cover larger surfaces quickly with a bright metallic silver tone and a gloss sheen. The aerosol format helps lay colour across body shells, fairings and shaped parts in smooth passes, creating an even look on broad panels and tighter contours alike. This TS colour belongs to the special acrylic resin spray range and is intended for plastic model work. The aluminum silver shade suits full-body colour coats as well as accent areas where a reflective metal effect is needed. On car bodies, aircraft sections or mechanical details, the gloss finish gives edges and panel shapes stronger definition under light. The spray format also helps reach vents, recesses and curved mouldings that are slower to cover with a brush. For hobby benches that handle multiple subassemblies, the 100 ml can offers enough paint for repeated finishing sessions across several parts. Used for scale models, custom bodies or detail refresh work, TS-17 fits projects that call for a clean metallic surface rather than a flat coat. Light, even passes support controlled coverage on spoilers, cowls, fuselage sections and armour panels. This makes the shade a practical choice when a build needs a crisp silver finish with the speed and reach of aerosol application. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-18 Semi Gloss Black, acrylic paint, 23 ml
300081018€5.491 l = €238.70
X-18 Semi Gloss Black brings a controlled black tone and a measured sheen to plastic model building work. The X-Acrylic formula is supplied in a 23 ml jar, giving model makers a compact paint size that suits detail painting, small subassemblies and repeat bench use. The semi gloss finish sits between flat and high gloss, which helps black parts keep visible shape and edge definition instead of disappearing into a fully matte or highly reflective surface. That makes X-18 useful on trim lines, cockpit sections, chassis details and other areas where contrast matters. The colour designation stays consistent within the X-Acrylic range, which supports touch-ups and follow-on work across longer builds. The paint is identified in the safety data as a liquid paint for brush application and has a density of 1 g/mL at 23 °C. On the workbench, a 23 ml jar is easy to keep within reach for recurring black details across cars, aircraft, military subjects and display pieces. For careful finishing sessions, the semi gloss character suits parts that need a darker technical look while still catching light on edges and contours.
XY acrylic colours
XF-16 Flat Aluminium, acrylic paint, 23 ml
300081316€5.491 l = €238.70
XF-16 Flat Aluminium is an acrylic paint for model building work that combines a metallic aluminium tone with a flat finish, giving painted parts a subdued metal look rather than a reflective gloss. The 23 ml jar size keeps the paint compact on the workbench while providing enough material for repeated detail work across multiple sections. The Flat Aluminium shade suits areas where a scaled metal appearance matters, such as panel sections, mechanical details or trim on vehicles, aircraft and other hobby builds. The acrylic formulation supports careful brush application on smaller parts and edges, where controlled placement is often more important than broad coverage. The flat character of XF-16 helps create a worn, technical or service-finish look on components that should read as metal without a polished shine. On a build table, the 23 ml jar fits naturally into regular painting sessions for touch-ups, accent work and consistent colour matching across separate assemblies. It also works well when a project needs the same aluminium tone repeated on multiple details, helping keep the finish visually coherent from one section to the next.
XY acrylic colours
XF-7 Flat Red, acrylic paint, 10 ml jar
300081707€3.591 l = €359.00
XF-7 Flat Red is an acrylic paint for model building work, supplied in a 10 ml jar for controlled use on smaller painting tasks. The flat red colour gives scale subjects a matte-looking finish that suits body details, interior sections, accessories and scenic elements where a muted surface is preferred over shine. The compact jar format keeps the paint amount focused on hobby use rather than large-area coverage, which helps when colour is needed for trim, markings or careful retouching. As part of the XF acrylic range, XF-7 fits neatly into colour-coded workshop storage and supports repeatable paint selection when a build calls for the same shade again. The paint format also suits measured loading onto a palette or direct brush work in short painting sessions at the bench. XF-7 Flat Red works well in build stages where smaller parts need a defined colour accent or where a flat finish helps separate one painted area from another. On military subjects, civilian vehicles, figures or display scenery, the 10 ml size is easy to keep close at hand for detail passes, corrections and finishing steps that call for a strong red tone.
XY acrylic colours
XF-85 Flat Rubber black, acrylic paint, 10 ml
300081785€3.791 l = €379.00
XF-85 Flat Rubber black is an acrylic paint for model finishing, supplied in a 10 ml jar for compact storage and measured use at the workbench. The flat colour effect suits parts that call for a subdued dark tone, giving painted sections a more restrained surface appearance than a glossy black. This shade is named Flat Rubber black, which makes it a focused choice for components such as tyres, trim accents or other dark areas where a softer visual finish is needed. The acrylic formulation supports careful application in small sections, especially where edges, narrow contours or isolated details need clean colour placement. The 10 ml content also helps when a project calls for a dedicated tone rather than mixing a larger batch. Within a paint rack, XF-85 is easy to identify as a distinct colour reference for repeat use on future builds. On military models, road cars, motorcycles or display pieces, this paint can be used to separate darker detail zones from surrounding body colours and metallic parts. It also fits touch-up work, partial repainting and finishing passes where a flat dark accent completes the overall look of the model.
XY acrylic colours
XF-86 Flat Clear, acrylic paint, 10 ml
300081786€3.791 l = €379.00
XF-86 Flat Clear is an acrylic paint for model finishing, supplied in a 10 ml jar and intended for adding a flat clear coat to painted surfaces. The matte effect helps tone down gloss, so colour schemes, panel lines and small moulded details remain the visual focus when a build reaches its final finishing stage. Used as a clear layer rather than a colour coat, XF-86 supports a more uniform surface across separate painted areas and can help bring decals and markings into the overall finish. The 10 ml size suits bench storage alongside other modelling paints and gives a manageable amount for touch-ups, selected sections or full clear coverage on smaller scale subjects. As an acrylic paint, it fits naturally into hobby paint collections built around detail work, surface refinement and staged finishing. On military subjects, road cars, motorcycles or display pieces, a flat clear coat can change how the completed surface reads under room light by softening reflections across body panels and accessories. XF-86 therefore suits the final paint stage on builds where the finish itself is part of the scale impression, whether the goal is a muted service look, a toned-down race livery or a more even appearance across multiple painted parts.
XY acrylic colours
X-2 White Gloss, acrylic paint, 10 ml jar
300081502€3.591 l = €359.00
X-2 White Gloss is an X-Acrylic paint for plastic model building, supplied in a 10 ml jar for brush-applied color work on small parts, trim sections and touch-up areas. The white gloss finish gives surfaces a bright, clean look that stands out on body panels, interior details and contrast sections where a reflective coat is part of the final appearance. The paint is identified in the range as X-2 and belongs to the glossy X-Acrylic line. Its liquid format allows paint to be picked up directly with a brush and placed exactly where coverage is needed, which is useful for edging, layered coats and detail zones that call for careful control rather than broad coverage. The compact 10 ml volume fits focused paint sessions and keeps a dedicated white gloss shade ready for repeat work across multiple model stages. The safety data names the mixture as flammable and advises use in well-ventilated areas. On the workbench, this shade suits cockpit parts, trim lines, body accents and small corrections after assembly or masking. It also works as a clean contrast color alongside darker finishes, helping painted details read clearly on static display models and other scale subjects.
PS spray colours
PS-31 Clear Smoke, polycarbonate spray paint
300086031€10.991 l = €109.90
PS-31 Clear Smoke brings a transparent smoked tint to polycarbonate model surfaces in a 100 ml spray can, giving RC bodyshell projects a darker finish while keeping clear sections visually defined. The aerosol format suits broad curves and recessed contours alike, so shells, windows and detail areas can be coated with a consistent mist from the can. This paint is specified for polycarbonate, making it a direct match for model bodies formed from that material rather than a general craft coating. The Clear Smoke effect works where a transparent dark tone is needed instead of a solid colour, such as tinted windows, light sections or layered visual accents on racing and road car shells. The can format also supports quick coverage on larger body panels that would take longer with brush application. For multi-step finishing, PS-31 can be worked into masking plans and staged colour layouts on the inside of a shell, depending on the design being built. On the bench, the 100 ml volume suits both single-shell projects and detail-focused finishing sessions where several clear sections need the same tone. In RC body painting, it fits naturally into builds that call for smoked glazing, darker lamp treatment or added contrast across transparent molded parts. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-56 Flat Metallic Grey, acrylic paint, 23 ml
300081356€5.491 l = €238.70
XF-56 Flat Metallic Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-56 shade code. The flat metallic grey tone gives scale surfaces a restrained metal appearance that suits parts where a bright reflective finish would look out of place, such as mechanical sections, armour details or muted body accents. Within a paint range, the XF-56 code provides a clear reference point when a build calls for the same colour across separate sessions. The acrylic format makes this shade relevant for detail painting, edge correction and small-area finishing where colour control matters. The 23 ml volume offers a practical amount for repeated use on multiple sections of a model rather than a single pass on one part alone. The short designation on the jar also helps keep paint storage and build planning easy to follow when several greys and metallic tones are in use together. On the bench, this shade fits naturally into projects that need a subdued industrial look rather than a polished chrome effect. It can be used to define vents, housings, structural elements and other scale features where a flatter metallic character helps preserve the realism of the finished model.
XY acrylic colours
X-27 Clear Red Gloss, acrylic paint, 23 ml
300081027€5.491 l = €238.70
X-27 Clear Red Gloss is an acrylic paint for model building that combines a transparent red tone with a glossy finish in a 23 ml jar. The clear colour layer leaves underlying shapes visible, which makes it especially suited to parts that need tint rather than solid coverage, such as light lenses, canopies or other detail sections on scale builds. The X-Acrylic resin paint is supplied as a liquid coating for brush work on plastic model surfaces. Its transparent character allows the colour depth to build step by step, so a single coat can add a light tint while further coats intensify the red effect. This gives more control when matching small visual accents across body parts, interior details or custom display pieces. The gloss finish also helps reflective areas read more distinctly under light, which can sharpen the appearance of clear components and decorative highlights. On the workbench, the 23 ml volume supports both one-off detailing and repeated use across several projects. It fits naturally into finishing stages where selected sections need a coloured clear coat rather than an opaque paint layer. Use on model parts should follow the handling guidance on the label, as the paint is classified as flammable liquid and vapour and should be used in well-ventilated areas.
XY acrylic colours
X-7 Red Gloss, acrylic paint, 23 ml jar
300081007€5.491 l = €238.70
X-7 Red Gloss brings a bright, glossy red finish to plastic model building in a 23 ml jar that fits neatly into bench work focused on colour accuracy, trim painting and clean visual contrast. The liquid acrylic format supports brush application on smaller parts and detail zones where controlled placement matters. This paint belongs to the X-Acrylic range and is identified as X-7 Red Gloss, making it easy to match within planned colour schemes and repeat across multi-stage finishing work. The supplied quantity of 23 ml gives enough material for repeated use on separate sections, touch-ups or more than one build depending on coverage. The safety data names it as a glossy special acrylic resin paint for plastic model building, with binders, pigments and solvents forming the mixture. Its liquid consistency suits careful loading onto a brush for edges, recesses and defined surface areas that need a smooth coloured coat. On the workbench, the red gloss tone can be used for body highlights, painted accessories or contrast sections that need a brighter visual accent than darker base colours. During custom projects, the jar format keeps the paint ready for short detailing sessions as well as longer finishing stages where several small parts are painted in sequence.
XY acrylic colours
X-12 Gold Leaf Gloss, acrylic paint, 10 ml
300081512€3.591 l = €359.00
X-12 Gold Leaf Gloss is an X-Acrylic paint for plastic model building, supplied in a 10 ml jar for precise brush application on smaller sections and detail areas. The glossy metallic gold tone gives trim, emblems and selected surface features a brighter visual contrast, helping fine painted elements stand out once the model is finished. The paint is identified in the range as X-12 and belongs to the gloss version of the X-Acrylic line. The safety data names it as a liquid mixture with pigments, binders and solvents for plastic model use, with a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C. That compact jar size suits bench work where only a measured amount is needed for edging, small components or colour accents rather than broad coverage. On display pieces, military subjects, road cars or custom builds, metallic gold can be used to pick out selected shapes and markings with a reflective finish. Used with a fine brush, the 10 ml format supports controlled loading for corners, raised details and narrow borders. It fits naturally into model-paint storage with other colour jars from the same bench setup, ready for touch-up work, finishing passes or carefully placed decorative highlights on plastic assemblies.
XY acrylic colours
X-22 Clear Gloss, acrylic paint, 23 ml jar
300081022€5.491 l = €238.70
X-22 Clear Gloss is an acrylic paint for plastic model building that adds a transparent glossy finish in a 23 ml jar. The clear coat changes the surface look rather than the base colour, making it useful where a build needs more shine on body panels, trim sections or selected details that should catch the light differently from surrounding areas. The X-Acrylic resin paint is supplied as a liquid mixture for brush application, which helps with controlled coverage on smaller zones and careful touch-up work during finishing. The safety data sheet identifies the mixture as containing binders, pigments and solvents, and states a density of 1.0 g/ml at 23 °C. It also lists a boiling range of 80 to 120 °C and solvent content of 50 to 60%. These technical details place X-22 in the dedicated model paint category rather than a general craft coating. On the bench, this clear gloss coat suits builds that need a brighter final surface, a more polished look on selected parts or an even layer over painted sections before the next finishing step. The 23 ml size keeps enough paint on hand for repeated detailing sessions across multiple model projects.
Primers
Liquid Surface Primer Grey 40ml, hobby primer
300087075€7.191 l = €179.75
Liquid Surface Primer Grey 40ml is a brush-applicable hobby primer for model painting preparation and surface correction. The grey liquid comes in a compact 40 ml glass bottle with a ribbed white screw cap, ready for careful bench work on seams, joins and small surface marks before colour coats are applied. The formula is described for spray or brush application as a liquid primer for model kits, and the label information points to use on gaps and scratches that need correction. Grey pigment helps surface irregularities stand out during prep, which supports more deliberate sanding, filling and repainting steps on detailed parts. The mixture contains binders, pigments and solvents, giving it the character of a dedicated surface-prep coating rather than a general paint. Water solubility is only partial, and the safety data identifies the contents as a flammable liquid with a 15 °C flash point. On a workbench, the bottle suits focused touch-up jobs on body panels, fairings, armour sections or other model surfaces where a smooth paint base matters. Use is intended in well-ventilated conditions, and the primer is kept for hobby surface preparation rather than broad household repair tasks. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-60 Flat Dark Yellow, acrylic paint, 23 ml
300081360€5.491 l = €238.70
XF-60 Flat Dark Yellow is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss surface look. The defined XF-60 shade gives builders a consistent colour reference when separate parts need to align across the same scheme. The acrylic formula suits careful work on smaller sections where even coverage matters, such as panels, fittings or surface details that need a restrained finish rather than a reflective coat. Flat Dark Yellow works especially well where a subdued tone is needed for scale realism, scenery elements or worn-looking equipment. The 23 ml volume gives enough paint for repeated use across more than one session, which helps when a build calls for staged painting, later corrections or added detail after the main coat has dried. On the bench, this paint fits naturally into focused finishing work, from picking out individual components to carrying one colour through a broader model scheme. It also supports consistent touch-up work when matching earlier painted sections matters as much as the first coat.
XY acrylic colours
XF-64 Flat Red-Brown, acrylic paint, 10 ml
300081764€3.591 l = €359.00
XF-64 Flat Red-Brown brings a subdued, earthy colour note to model finishing in a compact 10 ml format. The flat finish keeps surfaces visually restrained, which suits scale subjects where low-sheen colour treatment matters across trim, equipment, interior sections or weathered exterior areas. As an acrylic paint, XF-64 supports careful application on smaller zones that need controlled coverage rather than broad, heavy coating. The Flat Red-Brown tone works where a red-brown accent, worn surface effect or muted equipment colour is needed, and the 10 ml jar size keeps the paint easy to handle at the workbench. The shade designation XF-64 also helps place the colour clearly within an established model paint range when planning multi-colour finishing steps. The visible hazard pictograms indicate that the paint should be handled with appropriate care during use and storage. On military builds, diorama details or scale accessories, this colour can be used to pick out selected parts, add tonal variation or support weathered effects with a flatter surface appearance. It also suits touch-up work when a specific red-brown shade is needed without opening a larger paint format.
XY acrylic colours
XF-84 Flat Dark Iron, acrylic paint, 10 ml
300081784€3.791 l = €379.00
XF-84 Flat Dark Iron acrylic paint gives scale models a muted metallic tone that reads as worked metal rather than bright chrome. The 10 ml jar suits focused bench sessions where smaller parts, exposed mechanisms and structural details need a darker iron finish with a flat appearance. The shade is identified as dark iron and metallic, making it useful for armour sections, industrial surfaces and vehicle parts that benefit from a subdued metal look. The paint is supplied as a liquid coating and has an approximate density of 1.2 g/mL at 23 °C. The safety data lists a flash point of 33 °C and classifies the paint as flammable, with eye irritation and inhalation warnings. Use in well-ventilated areas and keep it away from heat, sparks and open flames. On the workbench, XF-84 fits neatly into weathering passes, detail painting and colour blocking across mechanical assemblies. It can be used to deepen contrast on tools, brackets and metal panels, or to break up larger painted areas with a darker industrial note that keeps the finish restrained rather than reflective.
Airbrush accessories
Airbrush Cleaner Acryl 250ml, model paint care
300087089€12.991 l = €51.96
Airbrush Cleaner Acryl 250ml supports consistent maintenance for painting equipment used in model finishing. The cleaning formula is intended for airbrush care and works where dried residue and tarnishes can collect inside the intricate airbrush system, helping keep the mechanism clear for later use. The 250 ml format gives a practical reserve for repeated bench work, whether the session involves frequent colour changes, end-of-day cleanup or restoring tools after weathering work. In addition to airbrush components, the cleaner can be used on weathering sticks and paintbrushes, so one bottle covers several parts of a painting setup. The rectangular bottle shape sits neatly on a shelf or workbench, and the ribbed screw cap supports a secure grip when opening and closing between tasks. Used as part of regular care, this cleaner fits naturally into model painting routines where spray equipment, brushes and finishing tools all need dependable cleanup. It suits bench setups focused on acrylic work and helps keep maintenance close at hand between priming, colour coats and detail finishing. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-23 Clear Blue Gloss, acrylic paint, 10 ml
300081523€3.591 l = €359.00
X-23 Clear Blue Gloss is an acrylic resin paint for plastic model building that gives parts a transparent blue tone with a glossy finish. The clear colour layer keeps underlying shapes and surface detail visible, which suits sections where the moulding, panel lines or lens texture should still read through the coating. The paint comes in a 10 ml jar, a practical size for repeated detail sessions on smaller components and selected accent areas. In the X-Acrylic range, this shade is positioned for brush-applied colour work on model surfaces that call for a tinted rather than opaque result. The clear blue effect can be used to alter the appearance of transparent parts, add colour variation to light units, or create a cooler finish on trim pieces. The glossy character gives the coated area a brighter, smoother look than a flat finish. On the workbench, X-23 Clear Blue Gloss fits projects that need controlled colour placement instead of full-body coverage. It works well when separate sections of a model call for a distinct transparent tone, such as lenses, windows, instrument details or decorative highlights on plastic parts.
XY acrylic colours
Paint Retarder Acrylic, paint additive, 40 ml
300087114€5.791 l = €144.75
Paint Retarder Acrylic is a paint additive for model finishing that slows the drying of acrylic paint and gives each coat more time to settle. Whether acrylic paint is applied with an airbrush or a brush, the extended working time supports a smoother surface and helps the paint flow out more evenly across the model. The formula can be used at up to a 1:10 ratio with acrylic paints, which makes it easy to mix a controlled amount into the paint already prepared for a session. A 40 ml bottle provides enough material for repeated use across touch-ups, larger painted sections and gloss-focused work. By delaying the drying phase, the additive helps reduce the chance of a grainy result, especially where an even coat matters for visible exterior parts. On body shells, panels and smaller detail areas, the slower drying action gives wet paint a longer window to level before it sets. That makes it useful for brush painting, airbrushed coats and finishing steps where a cleaner glossy surface is the goal. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-6 Orange Gloss, acrylic paint, 10 ml jar
300081506€3.591 l = €359.00
X-6 Orange Gloss brings a bright orange tone and a reflective finish to plastic model building, with 10 ml of acrylic paint sized for detail painting, touch-ups and focused colour work on smaller sections. The compact jar format keeps the paint easy to store alongside other modelling colours while supporting controlled brush use on parts that need crisp placement. The paint is identified as X-Acrylic Paint and is intended for plastic model building. Its gloss surface suits areas where a smoother, shinier look is part of the finished effect, whether on body accents, trim pieces or painted markings. The mixture contains binders, pigments and solvents, and the safety data identifies it as a flammable liquid with hazard statements H226, H318 and H336. The liquid has a density of 1.0 g/ml at 23 °C, a flash point of 31-33 °C and an alcohol-like odour. On the workbench, X-6 Orange Gloss fits neatly into colour planning for custom schemes, motorsport-inspired details or restoration of small painted sections on existing models. The 10 ml quantity also makes it practical for keeping a specific orange shade on hand for repeat jobs across separate builds, spare parts and later corrections.
XY acrylic colours
XF-61 Flat Dark Green, acrylic paint, 23 ml
300081361€5.491 l = €238.70
XF-61 Flat Dark Green is an acrylic paint in a 23 ml jar, giving model builders a compact colour supply for detailed bench work and controlled coverage on scale projects. The flat finish keeps the surface non-glossy, which suits military subjects, field equipment and scenery sections where a subdued painted look matters. The XF designation identifies this shade within the acrylic paint range, and the 23 ml format is easy to handle during brush work, touch-ups and repeated colour application across separate build stages. Flat Dark Green works well where a darker green tone is needed for camouflage areas, terrain pieces or accessory parts that should not reflect light strongly. The jar size also fits neatly into organised paint storage with other modelling supplies. On the workbench, this colour can be used for base layers on vehicle panels, for refining smaller details on accessories, or for adding depth to diorama elements. During longer hobby sessions, the compact jar format keeps the paint close at hand for repeat use across multiple model sections.
XY acrylic colours
XF-62 Flat Olive Drab, acrylic paint, 23 ml
300081362€5.491 l = €238.70
XF-62 Flat Olive Drab is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a matte olive drab shade. The colour suits military subjects, field equipment and scenery elements where a subdued surface tone is needed instead of a gloss finish. The acrylic formula supports controlled application during detail painting and broader coverage on larger sections, depending on the tool and technique used. A 23 ml jar gives a practical amount for repeated bench sessions, whether the work focuses on body panels, accessories or terrain pieces. The flat finish helps maintain the muted look often associated with service vehicles and equipment, making the shade useful when several connected parts need a consistent colour direction. The XF designation also helps builders identify the exact shade again when expanding an existing project or matching later touch-up work. On the workbench, this paint fits naturally into the finishing stage of scale builds, diorama elements and restoration-style repainting of selected parts. It also works well when one model calls for a single military base tone across storage gear, exterior sections and small fitted details.
XY acrylic colours
X-20A Thinner 23 ml, acrylic paint thinner
300081020€5.991 l = €260.43
X-20A Thinner is a compact 23 ml thinner for acrylic paint work, supplied in a clear glass jar with a white ribbed screw cap that suits precise bench use. The formula is identified for Tamiya acrylic and polycarbonate paints, supporting controlled dilution when paint needs a lighter mix for fine coverage, edge work or airbrush preparation. The liquid is colourless, carries a solvent odour and is partially soluble in water. Technical data in the safety sheet lists a density of 0.93 g/ml at 20 °C, a boiling range of 97 to 174 °C and a flash point of 32 °C. The same document identifies the mixture as solvent in water with 45% solvent content, including 35% propan-1-ol and 10% 3-methoxy-3-methylbutan-1-ol. ASTM D4236 conformity is stated on the label. On the workbench, the 23 ml size fits short mixing sessions, detail painting and routine tool care after brush or airbrush use. The screw-cap jar stores neatly beside paints and can be opened for small measured amounts when cleaning dried residue from tools and painted surfaces is part of the job. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-5 Black Semi Gloss, paint, 10 ml bottle
300082105€3.491 l = €349.00
LP-5 Black Semi Gloss is a 10 ml paint bottle for model finishing, detail work and colour correction where a black tone with a measured sheen fits the subject better than a full gloss surface. The semi gloss effect gives panels, trim and smaller parts a defined look while keeping reflections more restrained. The LP-Paint designation makes this shade easy to identify within a broader paint setup, especially when several blacks and clear coats are used during one build. The 10 ml size suits targeted application on selected sections rather than broad coverage, which helps when working on cockpit parts, exterior accents or small replacement pieces. Black is one of the most frequently used colours in scale modelling, so a clearly marked bottle supports repeat use during touch-ups and later adjustments. The compact format also stores neatly alongside other finishing supplies on a modelling bench. LP-5 fits naturally into build sessions that move between assembly, surface preparation and final detailing. It can be kept ready for repainting small areas, refining contrast on trim, or adding a controlled dark finish to parts that need more definition within the completed model.
XY acrylic colours
X-8 Lemon Yellow Gloss Acrylic Paint, 10 ml
300081508€3.591 l = €359.00
X-8 Lemon Yellow Gloss brings a vivid lemon yellow tone to plastic model building with a glossy surface that catches light on trim, markings and painted details. The 10 ml jar size suits focused bench work where a specific colour is needed for smaller sections rather than broad coverage. This acrylic resin paint is identified in the safety data as a glossy brush paint for plastic model building and is formulated from binders, pigments and solvents. The liquid mixture has a density of 1.0 g/ml at 23 °C, a flash point of 31 to 33 °C and a solvent content of 50 to 60%. The data sheet also lists a boiling range of 80 to 120 °C and notes partial water solubility of the solvents. These technical details place the paint clearly in the hobby finishing category rather than as a general craft colour. On the bench, the bright gloss shade works well for visual contrast on panels, striping, small accessories and highlighted sections that need a cleaner, more reflective finish than a flat colour provides. The compact jar size also makes it practical to keep a dedicated yellow tone ready for repeat touch-ups across model projects.
XY acrylic colours
XF-19 Flat Sky Grey, acrylic paint, 23 ml
300081319€5.491 l = €238.70
XF-19 Flat Sky Grey brings a muted grey tone to scale painting work, with a 23 ml jar size that fits neatly into regular bench use and repeat colour planning. The acrylic formula suits model finishing where a flat surface appearance is needed, whether the goal is broad base coating, smaller section work or careful colour blocking on shaped parts. The XF-19 code gives this shade a fixed place within a wider paint system, which helps when a build calls for the same grey across separate stages or matching parts. Flat Sky Grey works well where a restrained, non-gloss finish is required, and the jar format keeps the paint ready for measured use during detail painting or larger coverage passes. The product data identifies flammable and warning hazard pictograms, so handling should follow the label guidance during workshop use. On the bench, this shade fits projects that rely on technical greys rather than bright accent colours, from cockpit areas and structural sections to exterior panels on scale subjects. It also supports repainting, corrections and colour continuity when several assemblies need the same tone at different moments in the build.
XY acrylic colours
XF-2 Flat White, acrylic paint, 10 ml jar
300081702€3.591 l = €359.00
XF-2 Flat White is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled use on smaller parts, detail sections and colour corrections. The matte white tone gives scale surfaces a flat appearance that suits finishes where shine would distract from panel lines, contours or weathering effects. The paint is identified as XF-02 Flat White in the safety data and is described there as a liquid brush paint. Its density is listed as 1.2 g/mL at 23 °C, and the flash point is 33 °C. The safety classification also states flammable liquid and vapour, eye irritation, harmful if inhaled, and possible drowsiness or dizziness, which makes careful handling and good ventilation important during painting sessions. The container stays compact on a modelling bench and keeps a measured amount ready for repeat use across smaller assemblies. On a build table, this colour can be used for base coats on selected parts, crisp contrast details, or refinements after assembly and masking. The 10 ml volume suits hobby work that calls for precision rather than bulk coverage, whether the focus is cockpit details, body accents or finishing passes on scale accessories.
TS spray colours
TS-8 Italian Red Gloss, spray paint, 100 ml
300085008€10.491 l = €104.90
TS-8 Italian Red Gloss brings a vivid gloss red finish to plastic model surfaces in a 100 ml spray format that covers broad exterior areas quickly and evenly. The special acrylic resin paint is designed for model work, making it a practical choice for body shells, fairings, panels and other visible outer parts where a smooth colour coat shapes the final look. The aerosol format changes how the paint is applied: light passes from the can lay colour across curves, edges and larger sections without the brush marks that can interrupt a uniform surface. The label identifies this as paint for plastics, so it fits projects built around plastic model components rather than general household use. As part of the TS spray range, the shade name TS-8 Italian Red Gloss gives a clear match point when planning a specific colour scheme or replacing a previous can in an ongoing build. On the bench, the 100 ml volume suits full-body colour work as well as refresh coats on selected sections. The gloss finish works especially well on racing, road or custom subjects where a strong red surface and clean reflections help the painted parts read clearly once decals and final details are added. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-10 Gun Metall Gloss, acrylic paint, 23 ml
300081010€5.491 l = €238.70
X-10 Gun Metall Gloss brings a dark metallic sheen to scale model finishing, with a 23 ml jar size that suits repeated detail work across body parts, cockpit sections and exposed mechanical areas. The acrylic paint format supports brush application on plastic model builds, where controlled placement matters on edges, recesses and smaller shaped surfaces. The Gun Metall shade sits between grey and silver, giving panels, trim and technical components a colder metal look than a plain neutral colour. Its gloss finish catches light differently across raised detail, which helps rivets, vents and molded structure read more clearly once painted. The safety data identifies the paint as a liquid coating with metallic colour, a density of 1 g/mL at 23°C and a flash point of 31-33°C. The same documentation lists a boiling range of 80-120°C and an alcohol odour, reflecting the solvent-based acrylic resin formulation used for this colour. On a workbench, the jar size supports anything from a single highlight pass to broader finishing sessions on several subassemblies. It suits model makers adding metallic contrast to vehicle parts, equipment details or selected surface sections where a gloss metal tone gives the build a sharper, more technical finish.
XY acrylic colours
XF-23 Flat Light Blue, acrylic paint, 10 ml
300081723€3.591 l = €359.00
XF-23 Flat Light Blue is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled use on smaller sections, trim areas and colour corrections. The flat finish gives the shade a muted surface appearance, making it useful where a non-gloss light blue is needed across detailed builds and painted accessories. The acrylic formula suits careful brush application on edges, panels and fine raised details where clean placement matters. The 10 ml volume keeps the jar compact on a hobby bench while still offering enough paint for repeated touch-ups and small-scale colour work. As a dedicated shade in the XF range, XF-23 gives model builders a clearly identified colour reference that is easy to return to when matching earlier paint steps or extending an existing scheme. On aircraft, vehicles or scenery sections, the Flat Light Blue tone can be used to pick out selected areas, refresh worn paintwork on a finished build or support layered finishing across multiple sessions. The jar format also makes it easy to store alongside other modelling supplies so the shade stays ready for precise, repeatable paint application when the next stage of a build calls for it.
XY acrylic colours
XF-5 Flat Green, acrylic paint, 10 ml jar
300081705€3.591 l = €359.00
XF-5 Flat Green brings a muted colour tone to scale modelling work in a compact 10 ml jar that fits neatly into a bench setup for painting sessions, touch-ups and finishing passes. The acrylic formula suits controlled application on smaller sections, where measured brushwork and clean colour placement matter across vehicle parts, accessories or scenery details. The flat finish gives surfaces a non-gloss appearance that works well when a build calls for a subdued painted look rather than a reflective sheen. Within a paint range, this shade can be used for panel sections, equipment details and terrain elements that benefit from a restrained green tone. The 10 ml size also helps organise multiple colours in a modelling collection without taking much storage space. As a dedicated modelling paint, it supports careful colour planning across separate stages of a build, from base coating selected areas to later correction work on edges and small components. On the workbench, the jar format is easy to place beside brushes, palettes and other finishing tools during focused painting tasks. It suits projects where small parts, surface variation and precise colour matching shape the final appearance of the model.
XY acrylic colours
X-12 Gold Leaf Gloss, acrylic paint, 23 ml
300081012€5.491 l = €238.70
X-12 Gold Leaf Gloss brings a metallic gold finish to plastic model building with a 23 ml jar sized for detail work, trim accents and repeated brush sessions. The glossy formula suits parts that need a brighter visual contrast, from decorative panels to small raised sections that catch light on the finished build. This X-Acrylic paint is identified in the supplied safety data as a liquid mixture of binders, pigments and solvents for plastic model building. The data sheet lists a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C, underlining that this is a specialist modelling paint rather than a general craft colour. The finish is specified as gloss, which helps metallic areas read more clearly on shaped surfaces and fine moulded detail. Gold Leaf works especially well where a build needs a distinct metallic note alongside base colours, lining or small visual highlights. On the workbench, the 23 ml jar gives enough paint for careful edging, repeat coats and later corrections on matching sections. During painting sessions, the liquid format supports measured loading on a brush for controlled application across narrow parts, trim lines and compact assemblies.
XY acrylic colours
X-4 Blue Gloss, acrylic paint, 23 ml jar
300081004€5.491 l = €238.70
X-4 Blue Gloss brings a vivid blue tone and a reflective finish to model painting, with a 23 ml jar size that suits repeated detail work as well as broader brush-applied sections. The acrylic paint is identified in the data as a gloss brush paint for model building, giving a clear match between colour code and intended use at the workbench. The formula is listed as a liquid mixture of binders, pigments and solvents, with blue colour, alcohol odour and a density of 1 g/mL at 23°C. Safety data also states a boiling range of 80-120°C and an ignition temperature of 278°C, alongside a vapour pressure of 42.7 hPa at 20°C. These technical values place X-4 within the category of hobby paints that need deliberate, controlled handling during application and storage. The gloss finish is especially useful where a painted surface needs a brighter reflected look than a flat coat would give. On the bench, the 23 ml volume supports repeat use across multiple sessions, whether covering trim pieces, refreshing a colour section or adding blue contrast to selected components on a scale build. The jar format keeps the paint ready for careful brush loading during small-part work, while the coded X-4 designation makes it easy to identify within a paint range.
Primers
Liquid Surface Primer White 40ml for Model Prep
300087096€6.991 l = €174.75
Liquid Surface Primer White 40ml adds a preparatory coating step before paint reaches the model, giving small parts and shaped surfaces a white base that supports a cleaner finish. The 40 ml bottle suits bench work where measured amounts and steady handling matter, whether the task is covering a single body section or touching smaller components before colour is applied. The white primer is especially useful when the planned paint scheme uses lighter shades, because the undercoat influences how those colours read once dry. Its liquid form makes it suitable for detailed model work where recessed lines, edges and contours need coverage that a broad sanding step alone cannot provide. The square glass bottle with ribbed screw cap stores neatly between sessions and keeps the contents ready for repeated use across ongoing builds. The bottle label identifies the contents clearly as white liquid surface primer, which helps keep paint and preparation materials distinct on a busy workbench. In a model painting setup, this primer fits naturally into the stage between surface preparation and colour coats. It can be used when refining a fresh build, reworking a section before repainting, or preparing individual parts that need a lighter base before the final finish is added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-30 Metallic Silver Gloss, spray paint, 100 ml
300085030€10.491 l = €104.90
TS-30 Metallic Silver Gloss is a spray paint for model finishing that combines a metallic silver tone with a gloss surface in a 100 ml aerosol format. The special acrylic resin spray is intended for model work, where broad panels, curved sections and shaped parts benefit from an even coat laid down by a fine spray rather than a brush. The can is marked for plastics, making it suitable for compatible plastic model parts that need a uniform metallic appearance. Aerosol application helps cover contours, edges and recessed areas with the same colour character, which is especially useful when a build includes multiple connected surfaces. The metallic silver shade works well wherever a bright machined look, body colour accent or reflective trim effect is wanted on scale subjects. The gloss finish also gives decals and further detailing a clean painted base once the coat has cured. On the workbench, TS-30 suits body panels, fairings, exterior parts and other prepared components that call for a sprayed finish instead of hand brushing. The 100 ml can size fits both single-colour touchups and broader coverage across larger model sections. Use only with the handling care required for an aerosol paint. Warning! Not suitable for children under 14 years.
TS spray colours
TS-79 Semi Gloss Clear, paint spray, 100 ml
300085079€11.491 l = €114.90
TS-79 Semi Gloss Clear is a 100 ml paint spray for model finishing, designed to give larger surfaces a semi gloss clear coat with the speed and coverage of a synthetic lacquer aerosol. The fast-curing formula helps move a build from colour work to final surface treatment without a long wait between stages. This spray is especially useful on broad model areas where a brush can leave visible overlap, such as car bodies, fairings and other shell sections. The semi gloss finish sits between flat and full gloss, making it suitable for builds that need a softer final sheen rather than a high-shine coat. A 100 ml can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a concrete guide for planning workshop stock and multi-build sessions. The formula also supports layered finishing, because enamel and acrylic paints can be added after the overall coating stage for smaller details and accents. On the bench, TS-79 works well as the clear stage after the main colour has been completed and dried. It suits modelers who want consistent coverage across larger panels, then return with finer brush-painted details to complete trim, markings or small visual contrasts. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-20A Thinner 46 ml, acrylic paint thinner
300081030€8.991 l = €195.43
X-20A Thinner is a 46 ml acrylic paint thinner for model finishing work, supplied in a compact bottle that fits neatly on a hobby bench beside paints, palettes and cleaning tools. It is intended for thinning Tamiya acrylic and polycarbonate colors, helping painters adjust paint flow for finer brushwork and more controlled coverage on detailed model surfaces. The formula is a liquid solvent in water and appears clear in the bottle. According to the supplied safety data, it has a density of 0.93 g/ml at 20 °C, a flash point of 32 °C and partial solubility in water. These technical details matter during measured mixing and cleanup, where only small amounts are typically needed at a time. The bottle uses a ribbed screw cap for secure closure between sessions, and the 46 ml fill size suits regular bench use without taking much space among paints and tools. On a painting table, X-20A can be used when acrylic color needs a different working consistency for detail areas, edges or smooth coats. It also suits cleanup after painting, when brushes or airbrush parts need fresh thinner to loosen remaining color before the next stage of model work. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-3 Flat Yellow, acrylic paint, 23 ml jar
300081303€5.491 l = €238.70
XF-3 Flat Yellow brings a defined matte yellow tone to model painting in a 23 ml jar that sits neatly on the bench and keeps the colour close at hand during detail work. The acrylic formula gives builders a dedicated paint option for small sections, trim areas and surface accents where a flat finish suits the subject better than gloss. The 23 ml volume offers enough paint for repeated use across separate stages of a build, whether the task is picking out cockpit details, adding utility markings or covering selected panels with a solid yellow tone. The jar format supports controlled brush loading and helps keep colour changes organised when several shades are in use at once. Within the XF range, Flat Yellow works as a specific colour reference rather than a mixed approximation, which helps when a scheme calls for a consistent matte yellow across multiple parts. On the workbench, this paint suits careful finishing passes on scale vehicles, figures and scenery pieces where crisp placement matters. It also fits repair and touch-up tasks after assembly, when a small amount of matching colour is needed to complete edges, joins or added details.
Lacquer colours
LP-38 Flat Aluminum, paint, 10 ml bottle
300082138€3.491 l = €349.00
LP-38 Flat Aluminum brings a subdued metallic shade to scale finishing work in a compact 10 ml bottle. The flat effect gives aluminum areas a softer, less reflective appearance than a gloss metallic, which suits machinery, body details and surface sections that need a more restrained metal look on a finished model. This paint sits in the LP paint range and is identified as LP-38 Flat Aluminum in the colour lineup. The 10 ml content works well for bench setups where several shades are kept close at hand for layered painting, small corrections and repeated detail passes. The muted aluminum tone can be used to separate vents, panels, housings or trim from neighbouring colours, helping painted sections read more clearly at scale. On military, automotive or mechanical subjects, the flatter sheen also supports weathered or functional-looking metal areas instead of a polished finish. At the workbench, the bottle size suits focused sessions where only a small amount is needed at a time. It fits naturally into paint racks, tool drawers and organised hobby stations, ready for touch-up work, accent painting or planned colour placement across a larger build.
Lacquer colours
LP-61 Flat Metallic Grey, paint, 10 ml
300082161€3.591 l = €359.00
LP-61 Flat Metallic Grey is a modelling paint in a 10 ml jar, sized for controlled application on smaller painted sections and detail work. The flat metallic grey tone gives scale surfaces a subdued metal look, making it useful where a finish needs metallic character without a glossy sheen. Within a paint lineup, this shade can be used to separate mechanical areas, trim sections and other picked-out details from surrounding colours. The 10 ml content supports measured use, whether the task is a first coat on a small part or a later colour match during ongoing finishing work. The jar format also keeps the colour easy to identify and return to between painting sessions, which helps when a build is completed in stages rather than in one sitting. For model makers working through careful surface finishing, a dedicated metallic grey expands the range of tones available beyond plain solid colours. On the bench, LP-61 Flat Metallic Grey suits focused jobs such as painting selected components, refining visual contrast on assembled sections or revisiting earlier work for consistent colour continuity. Stored alongside other modelling supplies, the clearly designated shade is ready when a build calls for a restrained metallic accent rather than a bright reflective finish.
Brushes and accessories
Pipette Set 90mm/150mm, paint tool set, 3+3
300087124€8.29
This pipette set supports accurate paint handling for brush work and airbrush preparation with 2 useful lengths in one pack. It contains 3 short pipettes at 90 mm and 3 long pipettes at 150 mm, giving a simple way to transfer, measure and mix paint with more control across different bottle sizes. The 90 mm pipettes have a narrower shape than regular pipettes, which helps when reaching into slim openings where a wider tube is awkward to place. They are convenient for use with 10 ml paint and 40 ml bottles, while the longer 150 mm version adds extra reach for deeper containers. Graduation markings on each pipette show the amount withdrawn, making it easier to repeat paint mixes and adjust concentration with a clear visual reference. The solvent-resisting PE resin construction is suited to regular contact with hobby paints. On the workbench, the set fits naturally into mixing, thinning and transferring tasks without taking up much space. Keeping both short and long pipettes close at hand helps separate colours or mixtures and supports cleaner, more consistent paint preparation across different modelling sessions. Warning! Not suitable for children under 14 years.
Primers
Surface Primer Grey 100ml, model primer for ABS
300087026€9.291 l = €92.90
Surface Primer Grey 100 ml is a model primer for preparing parts before painting, with a formula suited to ABS, styrene and metal. The grey tone creates a neutral base that works especially well under darker colours, helping the next paint layer read more evenly across the surface. Before colour coats are added, the primer can be applied to body sections, detail parts and other model components that need a consistent starting layer. ABS and styrene are common materials in model building, and the added suitability for metal parts makes the can useful across mixed-material assemblies. The primed surface may also be wet sanded before paint is applied, which supports finer surface correction where seams, mould lines or small imperfections need extra preparation. Each can contains 100 ml, a practical size for regular bench use without taking up much space in the work area. On a build table, this primer fits naturally into the paint-prep stage, whether the task is coating a single replacement part or readying a full shell for darker finishes. It also suits projects where plastic and metal components appear side by side and need the same grey undercoat before the final colour is sprayed. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-2 White Gloss, acrylic paint, 23 ml jar
300081002€5.491 l = €238.70
X-2 White Gloss is an acrylic brush paint for model making, supplied in a 23 ml jar for detailed finishing work. The white gloss shade brings a bright, reflective surface to selected sections, whether the aim is to pick out trim, cover small parts or add contrast against darker colours on a build. The formula is identified in the safety data as a liquid acrylic resin special paint for brush application, with pigments, binders and solvents. That liquid format makes it suitable for loading a brush directly from the jar and working into corners, edges and other defined areas on model parts. The paint is listed with a density of 1 g/mL at 23 °C, and the safety data names an alcohol-like odour as part of the material profile. For storage and handling, the container should be kept tightly closed in a cool, well-ventilated place. On the workbench, this 23 ml size suits repeat touch-ups, small assemblies and colour matching across multiple sections of the same build. The glossy white finish can be used where a clean, light surface is needed on exterior panels, interior details or other brush-painted components in a model project.
XY acrylic colours
XF-10 Flat Brown, acrylic paint, 23 ml
300081310€5.491 l = €238.70
XF-10 Flat Brown is an acrylic paint for model finishing, supplied in a 23 ml jar for compact bench use and controlled access during painting sessions. The flat brown tone gives parts, panels and scenic details a matte surface appearance that suits weathered sections, interior areas and earth-toned accents on scale subjects. The XF designation identifies this shade within the Tamiya paint range, which helps when planning color layouts across separate stages of a build. The jar format keeps the paint contained between sessions and supports measured use for smaller quantities on detail-focused work. Flat brown can be used to pick out trim, tools, stowage areas or terrain features where a low-sheen finish fits the subject better than a gloss surface. The 23 ml content also makes it practical to keep several distinct tones on the workbench without taking up much space. On a model bench, this paint suits careful brushwork on cockpit sections, equipment details or groundwork elements that need an earthy, subdued tone. It also fits touch-up tasks after assembly or finishing steps, where a clearly coded shade helps keep the color choice consistent across separate parts and later corrections.
XY acrylic colours
XF-53 Flat Neutral Grey, acrylic paint, 23 ml
300081353€5.491 l = €238.70
XF-53 Flat Neutral Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the shade code XF-53. The flat neutral grey tone suits scale subjects that call for a muted, non-gloss surface, whether the goal is full-area coverage on smaller parts or careful colour placement on selected sections. Within a modelling setup, the coded jar format makes the paint easy to recognise, sort and return to during multi-step painting work. The 23 ml volume gives a practical amount for repeated bench sessions, and the flat finish direction supports weathered, technical or understated colour schemes where shine would look out of place. The neutral grey tone also works well alongside stronger accent colours, darker mechanical sections or layered finishing plans that rely on restrained base shades. Hazard pictograms shown for this paint indicate that careful handling is required during hobby use. On the workbench, XF-53 can be used for detail passes, touch-up stages and planned colour blocking across model components. The compact jar size stores neatly with other paint supplies and keeps a frequently used grey tone close at hand for ongoing builds and refinishing tasks.
XY acrylic colours
XF-57 Flat Buff, acrylic paint, 23 ml jar
300081357€5.491 l = €238.70
XF-57 Flat Buff is an acrylic paint in a 23 ml jar, supplied as a yellow-brown shade for scale modelling and finishing work. The flat finish keeps reflected light low, so painted sections read as muted colour rather than gloss, which suits military subjects, weathered equipment and scenery details on dioramas. The XF series designation gives this colour a clear place within a wider modelling paint range, helping with repeat use across touch-ups, matched details and ongoing build plans. The yellow-brown tone works well on dust effects, fabric impressions, wood-like details and aged trim where a cleaner bright colour would look out of place. The jar format keeps the paint contained between sessions and makes it easy to return to the same colour on later stages of a project. On the bench, XF-57 fits neatly into detail painting, selective panel work and finishing passes on smaller parts. The packaging image shows flame and warning hazard symbols, so handling and storage should follow the caution marking shown for this paint during hobby use.
Brushes and accessories
Brush Conditioning Fluid 23ml, brush care fluid
300087181€5.191 l = €225.65
Brush Conditioning Fluid 23ml adds a dedicated care step to model painting by treating brush bristles after cleaning and before storage. The compact 23 ml bottle sits easily on a hobby bench, and the screw-cap format keeps the liquid contained between sessions. The fluid is presented in a clear glass bottle and appears as a transparent liquid, while the side label indicates handling points such as shaking before use and using appropriate thinner for brush cleaning beforehand. The bottle is intended for brush maintenance rather than paint thinning, so it fits naturally into the finishing stage of a painting routine. The safety sheet identifies the mixture as an O/W emulsion, and the storage guidance states protection from frost, heat and direct sunlight. The same document notes that the liquid is emulsifiable in water at 20 °C. On the bench, this kind of brush care works well after detail painting, figure finishing or body shell decoration, when a brush has already been cleaned and the bristles need conditioning before the next session. It also suits longer breaks between projects, when keeping brush shape during storage matters as much as the paintwork itself. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Polishing Compound Fine, model finishing paste
300087069€6.691 l = €304.09
Polishing Compound Fine is a model finishing paste made for careful surface work on painted sections, clear parts and metal details. The fine grade targets light marks and supports a more even gloss, making it useful when a build is close to its final finish and small imperfections still catch the light. The compound comes in a 22 ml tube and uses a paste consistency that stays manageable on small parts and narrow sections. This format helps place the material where it is needed instead of flooding surrounding detail, which matters on canopies, body panels and trim pieces with tight edges. The product is identified for model making use, and the fine abrasive level fits later polishing stages after heavier correction work is complete. The safety data lists the mixture as an O/W emulsion with additives, with a pH value of 8.3 at 25 °C and a relative density of 1.1 at 20 °C. On the workbench, it suits the final refinement of a painted shell, the clearing of faint handling marks on transparent parts, or the brightening of small metal areas that need a cleaner finish. Use in areas with adequate ventilation and store the closed container away from heat and direct sunlight. Warning! Not suitable for children under 14 years.
PS spray colours
Polycarbonate Body Cleaner, model paint prep 40ml
300087118€7.591 l = €189.75
Polycarbonate Body Cleaner is a 40 ml surface-prep solution for polycarbonate bodies that streamlines the stage before painting. Instead of washing a shell with detergent, waiting for it to dry and then moving on to colour work, this cleaner prepares the surface directly so paint prep can start sooner on clear or coloured body panels. The formula is intended for hobby maintenance as well as refinishing work. It removes oils and grease from the body surface before paint is applied, and it can also remove completely dried paint when a shell needs to be stripped back for another finish. Scuff marks from normal roll overs during everyday driving can be cleaned away without damaging the body surface, which makes the bottle useful beyond the paint bench. An added antistatic agent helps reduce static electricity build-up on the R/C model, a practical detail when handling lightweight polycarbonate shells. On a workbench, the cleaner suits body preparation before masking and painting, and after running sessions it can be used to freshen marked areas on the shell. The compact bottle format keeps the liquid easy to store with other model supplies while staying ready for regular body care. Warning! Not suitable for children under 14 years.
PS spray colours
PS-55 Flat Clear, polycarbonate spray paint
300086055€12.191 l = €121.90
PS-55 Flat Clear is a polycarbonate spray paint designed to give RC bodyshells a matt clear finish while preserving selected glossy details. Applied over the inside of a polycarbonate body, the coating changes the surface effect without covering the underlying colour, so the shell keeps its painted appearance with a flatter final look. The masking method is what makes this spray especially useful for detailed bodywork. Headlights, windows, rear lights and other areas that should stay glossy are masked from the outside before spraying, while the remaining surfaces receive the flat clear coat. This creates a clear visual contrast between transparent or light-style sections and the surrounding panels. The 100 ml can suits hobby bench use and gives enough material for focused finishing work on model car bodies and similar formed polycarbonate parts. In workshop use, PS-55 fits the final stage of body preparation, when a painted shell needs a different surface character rather than a new colour. It works well for race bodies, road car shells and custom RC projects where matt panels and glossy detail zones need to sit side by side with a clean, controlled result. Warning! Not suitable for children under 14 years.
TS spray colours
TS-38 Gun Metal Semi Gloss, spray paint, 100 ml
300085038€10.491 l = €104.90
TS-38 Gun Metal Semi Gloss is a 100 ml spray paint for model building, supplied in an aerosol can for direct application to plastic parts. The Gun Metal tone combines a metallic grey look with a semi gloss finish, making it useful for body sections, trim pieces and mechanical areas that benefit from a darker sprayed color with a subtle sheen. The TS paint format is suited to covering broader surfaces quickly, especially where curved shells, panel shapes or recessed details are harder to finish evenly with a brush. The aerosol spray lays down color across larger sections in one continuous pass, which helps keep the finish visually consistent on scale model components. For builds that call for more shine, the color coat can be followed with TS-13 glossy clear coat. This adds a glossier top layer while keeping the underlying TS-38 shade in place. On a car bodyshell, aircraft section or other plastic model assembly, the Gun Metal shade works well for contrast areas, technical details and darker accent zones. The 100 ml can size fits neatly into hobby bench use, whether the goal is a full exterior coat or selected sprayed sections that need a metallic grey finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-40 Metallic Black, spray paint, 100 ml
300085040€10.491 l = €104.90
TS-40 Metallic Black brings a dark metallic tone to plastic model surfaces with a semi gloss finish that gives panels and shaped parts a clean, light-catching look. The aerosol format lays colour across broad areas quickly, making it well suited to body shells, exterior panels and other model sections where an even coat matters. This spray paint comes in a 100 ml can and is part of the TS paint range for plastic models. The Metallic Black shade combines a black base with a metallic effect, which helps edges, curves and moulded lines stand out under changing light. On larger surfaces, the spray pattern supports more consistent coverage than hand brushing, especially where recessed contours or rounded forms make brush marks harder to avoid. The semi gloss surface sits between flat and high gloss, giving the finish visible depth without a mirror-like shine. When a brighter final sheen is required, TS-13 glossy clear coat can be applied over the colour layer. In model building sessions, this shade suits vehicle bodies, fairings and accessory parts that call for a darker metallic appearance. It also works well when a build needs contrast between painted exterior sections and smaller detail areas, while the can format keeps application straightforward across repeated coats. Warning! Not suitable for children under 14 years.
TS spray colours
TS-6 Flat Black, spray paint, 100 ml aerosol
300085006€10.491 l = €104.90
TS-6 Flat Black is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as a special acrylic resin spray. The flat black colour gives plastic model parts a non-gloss surface that suits body sections, panels and detail areas where a muted finish is the goal. The can is labelled for plastics, making it a clear fit for hobby work on compatible model surfaces. As an aerosol, it covers broad areas faster than hand painting and reaches curved shapes with an even mist when applied in controlled passes. The visible handling guidance points to a simple working method: shake the can vigorously, spray in light coats and allow drying between passes. Clearing the nozzle after use helps keep the spray pattern ready for the next session. The 100 ml fill offers enough paint for repeated workshop use across multiple stages of a build or refinishing job. On the bench, TS-6 Flat Black suits body preparation, colour blocking and final surface work on plastic model assemblies. It also fits touch-up tasks where a flat black section needs to match surrounding painted parts with the same low-sheen look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-95 Pure Metallic Red, paint spray, gloss 100 ml
300085095€11.491 l = €114.90
TS-95 Pure Metallic Red is a gloss spray paint for model finishing, supplied in a 100 ml aerosol can and formulated as a synthetic lacquer. The fast-curing formula suits larger model surfaces where an even metallic coat matters, such as car bodies, fairings and broad exterior panels that benefit from a smooth sprayed finish. The colour is identified as Pure Metallic Red, giving bodywork a bright metallic tone that catches light across curves, edges and recessed lines. Because the TS spray formula is not affected by acrylic or enamel paints, the main colour coat can be followed with hand-painted detail work in other paint types once the larger surfaces are covered. That makes it useful for separating the main body colour from smaller trim areas, vents, frames or accent sections without changing the base finish. The aerosol format also helps distribute paint evenly across wide sections that are harder to cover with a brush. On a workbench, one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear reference point for planning multi-body projects or repeat colour use on matching builds. The spray format suits full-body coating first, followed by detail painting once the main shell has cured, keeping the finishing process focused and orderly. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-1 Black Gloss, acrylic paint, 23 ml jar
300081001€5.491 l = €238.70
X-1 Black Gloss is an acrylic paint for plastic model building, supplied in a 23 ml jar for repeated bench use. The black gloss finish gives painted sections a dark, reflective surface that suits trim, panel areas and detail work where a clean, solid tone matters. The formula is described as a glossy brush paint and is intended for model-making applications rather than general craft use. On body shells, interior parts and small exterior details, the gloss surface changes how edges catch the light and helps separate black sections from neighbouring colours. The 23 ml volume supports more than a single pass, which is useful when a build needs a base coat, later corrections and matching touch-ups on added parts. As a liquid paint, it can be worked into narrow recesses, raised moulded details and small shaped areas that need controlled coverage. At the workbench, this colour fits projects that call for black trim, cockpit elements, mechanical details or contrast sections on plastic models. The jar format keeps the paint ready for return use across several stages of a build, from first colour application to later finishing work.
XY acrylic colours
X-26 Clear Orange Gloss, acrylic paint, 23 ml
300081026€5.491 l = €238.70
X-26 Clear Orange Gloss is an X-Acrylic resin paint for plastic model building, supplied in a 23 ml jar for brush-applied colour work on small parts and detailed assemblies. The clear orange tone lays a transparent gloss layer over the surface, so moulded detail and the base beneath can remain visible while the colour shifts toward a warm amber effect. That transparent character makes the paint especially useful on parts such as indicator lenses, signal covers and custom trim where solid colour would hide the shape. The gloss finish catches light across raised edges and curved surfaces, giving clear components a brighter, more defined appearance once dry. As part of the X-Acrylic range, it suits fine detail work where narrow borders, recessed sections and small matching parts need careful colour placement rather than broad coverage. The 23 ml volume also supports repeat use across several modelling sessions, whether the task is a single accent or a coordinated set of small painted sections. On a scale car, aircraft or display build, X-26 can be used to tint clear moulded parts, refresh coloured details or add contrast to selected features without covering every surrounding surface. It also fits bench work that calls for layered colour effects on compact components, where a transparent gloss tone changes the look while keeping the original form readable.
XY acrylic colours
X-32 Titanium Silver Gloss, acrylic paint, 10 ml
300081532€3.791 l = €379.00
X-32 Titanium Silver Gloss brings a bright metallic finish to plastic model work, with a 10 ml jar sized for detail painting, trim accents and smaller colour areas. The titanium silver shade gives panels, mechanical sections and highlighted edges a crisp reflective look that changes the character of a build with controlled brush-applied colour. This X-Acrylic paint is identified in the data as a gloss brush paint for plastic model building. The liquid formula has a silver colour and an alcohol odour, with a stated density of 1.0 g/ml at 23°C. The safety data lists a boiling range of 80 to 120°C, a flash point of 31 to 33°C and a solvent content of 50 to 60%. These technical details place it clearly in the finishing stage of model work, where a metallic tone is used to define separate parts, pick out moulded detail or sharpen visual contrast between neighbouring surfaces. On vehicle kits, the shade can be used for trim lines, mechanical housings or selected body details; on other plastic model subjects, it suits small components that need a clean metallic gloss. The compact jar format also works well when a project calls for one specific accent colour rather than broad coverage across large surfaces.
XY acrylic colours
XF-15 Flat Flesh, acrylic paint, 23 ml jar
300081315€5.491 l = €238.70
XF-15 Flat Flesh is an acrylic paint in a 23 ml jar, set up for controlled colour work on scale modelling projects where a flat skin-tone shade is needed. The clearly marked XF-15 designation helps identify the colour quickly on the bench, while the compact jar format suits repeated access during detail painting and small-area coverage. The Flat Flesh shade is suited to painted sections such as figures, interior details and other parts that call for a muted, non-gloss appearance. Acrylic paint supports careful application on fine surfaces where edges, recesses and small contours matter. The 23 ml content gives a practical amount for ongoing modelling work, whether the task is first-pass coverage, later corrections or matching previously painted sections. The label shown for XF-15 also carries hazard pictograms with a flame symbol and an exclamation mark for clear substance identification and handling awareness. On the workbench, this paint fits naturally into finishing stages that rely on precise shade choice rather than broad coverage. It can be kept alongside other coded colours for organised paint selection during figure painting, interior finishing and detail-focused touch-up sessions on scale builds.
XY acrylic colours
XF-24 Flat Dark Grey, acrylic paint, 23 ml
300081324€5.491 l = €238.70
XF-24 Flat Dark Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss surface appearance. The dark grey tone suits scale subjects that call for restrained colour, whether the aim is painted body sections, equipment housings or structural details with a muted finish. The acrylic formula supports careful application on smaller parts and defined areas where clean edges matter. Flat Dark Grey can be used to build tonal contrast against lighter greys, metallic shades or camouflage colours, and the 23 ml jar size keeps a usable amount ready for repeat sessions at the bench. The compact container stores easily with other hobby colours and keeps the shade clearly identifiable as XF-24 during paint selection. The label format also makes it straightforward to sort within an existing paint range by code and colour name. On a model bench, this shade fits naturally into projects with machinery, vehicles, diorama structures or weathered surface details. It also works for selective repainting, panel accents and finishing passes where a gloss effect would look out of place. Handle with care: the provided hazard information indicates flammable contents and warning classification.
XY acrylic colours
XF-3 Flat Yellow, acrylic paint, 10 ml
300081703€3.591 l = €359.00
XF-3 Flat Yellow brings a matte yellow tone to scale finishing work in a compact 10 ml jar. The acrylic formula suits controlled application on small sections, whether the task is picking out details, blocking in colour areas or refining a painted model with a clean flat surface. The XF designation identifies this shade within the Tamiya acrylic paint range, making it easier to place alongside other workshop colours during repeat builds and repair work. Flat Yellow can be used where a non-gloss appearance fits the subject better than a reflective coat, especially on utility markings, equipment details or custom colour layouts. The 10 ml content keeps the jar manageable on a crowded bench and helps portion paint for smaller sessions without opening a larger container. On the workbench, this shade fits touch-up jobs, detail painting and colour planning across model kits and accessories. It also works as a dedicated yellow kept ready for recurring tasks, such as small highlights, panel sections or repainting areas that need a consistent matte finish.
XY acrylic colours
XF-49 Flat Khaki, acrylic paint, 23 ml
300081349€5.491 l = €238.70
XF-49 Flat Khaki is an acrylic paint for scale model finishing, supplied in a 23 ml jar for controlled use on smaller sections, detail areas and colour matching across a build. The flat finish keeps the surface non-glossy, which suits subjects that call for a subdued, service-style appearance rather than a reflective coat. The khaki tone works well where muted earth and fabric-like colours are needed on model surfaces. It can be used to pick out equipment parts, interior sections, accessories and scenic elements that benefit from a restrained military-style shade. The jar format keeps the paint contained between sessions and supports measured use during step-by-step painting work. The XF-49 code also makes the colour easy to identify within an established paint range when a build calls for the same shade again. On the workbench, this paint fits neatly into careful finishing routines such as detail correction, panel colour separation and small repaint jobs after assembly. It also suits builders who keep a selection of specific tones ready for touch-ups, weathered accents and consistent colour planning across several model projects.
XY acrylic colours
XF-63 Flat German Grey, acrylic paint, 10 ml
300081763€3.591 l = €359.00
XF-63 Flat German Grey is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled colour application on scale builds. The flat grey tone gives painted areas a subdued surface appearance that suits subjects where a low-sheen finish is part of the visual character, from armour details to mechanical sections and weathered equipment. Within a paint rack, XF-63 works as a dedicated single shade rather than a mixed approximation, which helps keep repeat applications visually consistent across separate sessions. The acrylic formulation makes it a practical choice for small-area coverage, edge work and selective repainting where a defined grey is needed. The 10 ml content also fits neatly into hobby storage and keeps a frequently used neutral tone close at hand during ongoing build and finishing work. On the bench, this shade can be used when picking out panels, tools, fittings or other model details that call for a restrained grey rather than a reflective finish. It also suits correction work on earlier paint stages, where a compact jar and a clearly identified XF-63 label help speed up colour selection during focused modelling sessions.