Tamiya Product Range
Discover the fascinating world of Tamiya model making! Here you will find everything your heart desires: from RC cars and model cars to an extensive range of modelling accessories. Immerse yourself in high-quality and detailed replicas: perfect for beginners and professionals alike!
Military model vehicles 1:35
1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)
300035047€7.59
Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Ger. MG Troops (7)
300035038€7.19
Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. PzKpfw. IV Ausf. D (3)
300035096€21.99
Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Citroen DS MB-01
300058734€154.99
Article number: 300058734 Product: 1:10 RC Citroen DS MB-01 Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknown cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Castrol Toyota Tom´s Supra GT
300024163€26.99
Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Ger.Mortar-Troop (4)
300035193€9.79
Article number: 300035193 Product: 1:35 Fig.-Set Ger.Mortar-Troop (4) During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling "fire!" The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit. Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)
300035087€23.99
Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:6/1:12/1:24 Cable 0.8mm OD Bla 2m
300012677€4.49
Article number: 300012677 Product: 1:6/1:12/1:24 Cable 0.8mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,80mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Military model vehicles 1:35
1:35 BW Flak-Panzer Gepard (1)
300035099€26.49
Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set Ger.Tank Grenadie.(8)
300035061€7.19
Article number.: 300035061 Product: 1:35 Figure Set German Pz Grenardiere (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Ger.SdKfz.171 Panther A (2)
300035065€21.99
Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)
300035020€22.99
Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.
Model car kits 1:24
1:6/1:12/1:24 Cable 0.5mm OD Bla 2m
300012675€4.49
Article number: 300012675 Product: 1:6/1:12/1:24 Cable 0.5mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,50mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Model car kits 1:24
Carbon Decal Twill F
300012681€8.19
Article number: 300012681 Product: Carbon Decal Twill F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/fine, 130x190mm sheet size, instructions.
Military model vehicles 1:35
1/35 Ger. Panther Ausf.D
300035345€59.99
Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1/35 German Tank Crew Set
300035354€19.99
Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Ford Mustang GT4 (TT-02)
300058664€154.99
Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.
On-road RC cars (2WD/4WD)
1:10 RC Mercedes-AMG GT3 (TT-02)
300058639€159.99
Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Plasma Edge II TT-02B 4WD
300058630€149.99
Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Racing Fighter (DT-03) The Real
300058628€103.99
Article number: 300058628 Product: 1:10 RC Racing Fighter (DT-03) The Real Say hello to the new model on Tamiya's easy-to-assemble, rough and tumble DT-03 buggy chassis! It features a brand new polycarbonate body design with attractive, boxy lines and a stylish rear wing. Customers outside of Japan will be delighted to hear that the export version of this kit exclusively features a torque-tuned motor and CVA oil dampers. About the Model • This is a 1/10 scale R/C model assembly kit. • Features a stylish new body molded in durable and lightweight polycarbonate. Brand new stickers are included to decorate the model. • The DT-03 uses a tough monocoque frame. Big wheelbase (288mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance off-road! • Front arms are at a 25-degree angle for great off-road driving. Dampers are high-performance CVA oil shocks. • A torque-tuned motor is included in the export version ONLY. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Lightweight kit with detailed and illustrated assembly instructions, motor, controller Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Ducati 1199 Panigale S
300014129€54.99
Article number: 300014129 Product: 1/12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Ducati Superleggera V4
300014140€55.99
Article number: 300014140 Product: 1:12 Ducati Superleggera V4 Tamiya is proud to announce the release of the Superleggera V4 as a new addition to our 1/12 Motorcycle Series. The Superleggera V4 is a road-legal version of the Panigale V4 produced by the legendary Italian motorcycle manufacturer, Ducati. This motorcycle’s cornerstone is the lightening facilitated by carbon fiber material in the fairings, chassis and swing arm, and its eye-catching design features the distinctive carbon fiber biplane wings on either side of the front cowl for aerodynamics. The engine is the Desmosedici Stradale R, a 998cc V4 powerplant with Ducati’s Desmodromic valve timing system. This motorcycle also uses Öhlins suspension and Brembo brake system. In addition, installation of the Akrapovič titanium muffler – which is for the racing kit – with a dedicated engine part results in a superb power/weight ratio of 1.54hp/kg. Do not miss this great chance to get our assembly kit model of this rare super-bike; only 500 of the full-size motorcycle were produced. Kit model, scale 1:12, Street Version, engine, frame, fairing, racing motorcycle stand, semi-slick tires, exhaust system, instructions, decal, Length 176mm. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Ford Zakspeed Capri Turbo MAMPE
300024376€30.99
Tamiya presents an updated new edition of the model 24014 Ford Zakspeed Capri Turbo in 1:24 scale with new Cartograf decals, updated assembly instructions and packaging. The German Racing Championship (DRM) comprised two classes with displacements of 2,000 cm³ and more and under 2,000 cm³. The Ford Zakspeed Capri Turbo was a vehicle that challenged the BMW 320 Turbo. It made its debut at the eighth DRM round in Hockenheim in the summer of 1978 and was characterized by an extremely low front end, a wide body and eye-catching red and yellow markings on a black background. This car regularly raced in the leading group and took its first victory in the spring race at the Nürburgring in October 1978. The following year, it finished second in the first DRM race in Zolder and won the second race in Hockenheim. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Porsche 911 GT1 LeMans `96 Factory
300024186€35.99
Article number: 300024186 Product: 1/24 Porsche 911 GT1 LeMans `96 Factory ★This is a plastic model assembly kit depicting the car which competed in the 1996 running of the 24 Hours of Le Mans. ★The low, side form of the car is recreated in style, with depictions of the midship twin turbo engine and suspension. ★Features a realistic interior with roll cage, plus a removable rear cowl component. ★Decals are included to recreate the livery.
Military figures & Accessories 1:35
1:35 Diorama-Set Ger.Barrel & Jerry Can
300035186€8.69
Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Soilder w/ Bicycle (2)
300035240€12.99
Article number: 300035240 Product: 1:35 Diorama-Set Soilder w/ Bicycle (2) This is a plastic assembly model kit which includes two German soldiers on bicycles. Separate parts to depict the bicycles' handles and pedals as well as detailed wheel spokes and seats provide the models with added realism. You can choose to assemble the soldier figures in either a standing or cycling pose. Display your models on their own or even as a part of a larger diorama.
Military figures & Accessories 1:35
1:35 Diorama-Set US/Dt.Jerry Can Set
300035026€5.49
Article number: 300035026 Product: Gear bag 58618 Mt.Beetle This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. ★Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. ★Includes nine each of U.S. and German type jerry cans, plus three each of new and dented barrels. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Tank Ammo Load. Crew (4)
300035188€12.29
Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★ Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★ Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models. Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)
300035035€7.19
Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Kingtiger Ardennen Fro. (3)
300035252€59.99
Article number: 300035252 Product: 1:35 Ger. Kingtiger Ardennen Fro. (3) Development of the massive King Tiger began in February 1943 to counter the increasing threat of Russian Tanks. A more powerful cannon was added, upgrading from the L56, 88mm of the Tiger I to the Type 43 L71, 88mm high velocity gun. The chassis front armor was 150mm thick with 80mm thick side armor. The Henschel and Porsche companies came up with rival turret prototypes. After the trial production of 50 tanks with the Porsche turret, the Henschel design, with its extremely thick armor that measured 185mm on the front and 88mm on the side panels, was adopted for mass production. The Henschel turret itself was revised mid-way through production, from a stepped gun mantle to a smooth one. Due to the havoc wreaked by the King Tiger I during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the King Tiger up until the very last day of the war. As for the DKW NZ350 military motorcycle, production began in 1940. However, this German military motorcycle experienced mid-production changes when resources became limited towards the end of the war. DKW NZ350s at that time were seen with smaller headlights and thinned-out fenders. About the Model ★Tamiya presents a 1/35 scale model of the German King Tiger as it appeared during the final German offensive in the Ardennes Forest of Belgium. ★Total length: 294mm, total width: 108mm. ★>Henschel design turret recreated in superb detail. ★Kit includes parts for two different types of gun mantles- stepped and smooth. ★Turret's rear escape hatch can be opened and closed after assembly. All other hatches can be assembled in the open or closed positions. ★Kit includes DKW NZ350 German Military Motorcycle recreated as it appeared during the latter stages of World War II with smaller headlight and thinned-out fender. ★Three figures included: Tank commander and orderly wearing leather jackets, and tank crewman. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)
300035194€45.99
Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger.Flak 8,8 w/Motorcycle (9)
300035017€32.99
Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set Ger. Assault Tro. (8)
300035030€7.19
Article number: 300035030 Product: 1:35 WWII figure set German. infantry (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Ger.Jerry Can Set (12) Early
300035315€6.99
Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35/1:16 WWII Figure Insignia Decal-Set
300012625€10.49
Article number: 300012625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. 1/16 1/35 SCALE WWII GERMAN MILITARY INSIGNIA DECAL SET Warning! Not suitable for children under 14 years.
Model ships 1:350
1:350 WWII Ger. Battleship Tirpitz
300078015€82.99
Article number: 300078015 Product: 1:350 WWII Ger. Battleship Tirpitz The sole sister ship of the Bismarck, the Tirpitz was a perpetual worry for the Royal Navy since its presence in Norway was a threat to Allied convoys. Considerable resources were spent countering her potential moves until she was finally sunk by Royal Airforce bombers. Tamiya now brings you this marvel of German engineering as a highly-detailed 1/350 scale assembly kit display model. The elegant lines of the Tirpitz are accurately reproduced and distinguishing features that set her apart from the Bismarck such as quadruple torpedo tubes are also recreated in great detail. The model comes with a specially made display base and a beautiful nameplate for an impressive display. 1/350 Tirpitz
Model aircraft kits 1:48
1:48 Ger. Bf109 G-6 Messerschmitt
300061117€49.99
Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.
Model aircraft kits 1:48
1:48 US North American P-51D Mustang
300061040€29.99
Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:6/1:12/1:24 Cable 1mm OD Bla 2m
300012678€4.49
Article number: 300012678 Product: 1:6/1:12/1:24 Cable 1mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 1,00mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Model motorcycle kits 1:12
1/12 Kawasaki Ninja H2R
300014131€58.99
Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1/12 Yamaha YZF-R1M
300014133€49.99
Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.
On-road RC cars (2WD/4WD)
1:10 RC Audi 90 quattro Racing Lac.TT-02
300047511€179.99
This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Body prepainted in White (PS-1) with Smoke (PS-31) windows Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger,) 4WD kit model, TT-02 chassis, electronic speed controller, 540 torque-tuned motor, pre-painted polycarbonate. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Impreza Monte-Carlo 99 (TT-02)
300058631€164.99
Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC MB CLK AMG 2002 TT-02
300058722€154.99
Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
RC buggys (2WD/4WD)
1:10 RC Neo Scorcher (TT-02B)
300058568€149.99
Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Porsche 911 GT3 (992) TT-02
300058712€159.99
Article number: 300058712 Product: 1:10 RC Porsche 911 GT3 (992) TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC T/GR Yaris Rally1 Hybrid TT-02
300058716€159.99
Article number: 300058716 Product: 1:10 RC T/GR Yaris Rally1 Hybrid TT-02 Here comes an additional 1/10 R/C model assembly kit based on our popular TT-02 chassis – this time, Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. To comply with the Rally1 restriction which started in 2022, manufacturers developed new cars compatible with hybrid system, and Toyota made the GR Yaris Rally1 Hybrid. The combination of hybrid unit integrated with motor and generator and engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Off-road RC cars
1:10 RC Toyota Land Cruiser LC300 CC-02
300058688€264.99
Article number: 300058688 Product: 1:10 RC Toyota Land Cruiser LC300 CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 300 as our new R/C model on the cross country CC-02 chassis. Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. In August 2021, Toyota Land Cruiser 300 series was released with full model change for the first time in fourteen years. Added to its inherited styling from the 200 series, an enlarged front grille gives a powerful and prestigious image. Ladder frame chassis and rigid axle rear suspension allow hard off-road performance. This car is powered by a 3.5-liter V6 gasoline twin turbo engine or 3.3-liter V6 diesel twin turbo engine, and features 10-speed automatic transmission. This R/C model assembly kit recreates the top grade ZX model of the Land Cruiser 300 series. Included: 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, Polycarbonat Body, Type 540 Motor, LED Light-Unit, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Model motorcycle kits 1:12
1:12 Honda Dax125 Tamiya Edition
300014142€27.99
Article number: 300014142 Product: 1:12 Honda Dax 125 TAMIYA Edition Tamiya is proud to announce the release of the Honda Dax125 Tamiya Limited Edition as a new addition to our 1/12 Motorcycle Series. (The first generation Dax in 1969 was recreated by Item 16002.) Following on from the popular Monkey (Z-series) bikes, the Honda minibike Dax was announced in 1969. The Dax had a distinctive T-bone frame crafted in pressed steel which housed the fuel tank, and centrifugal clutch engine. It was designed to be ridden by anyone, anywhere, and its charming, distinctive form was loved all around the world. Although its Japanese sales finished in 1981, the Dax returned in 1995 with a similar design to the original. In 2022, Honda announced the Dax125 which inherits the established Dax identity, incorporating elements such as the T-bone frame, a long bench seat, a chrome upswept muffler and more. It can be ridden both on city streets and the open road. Owners can choose between the rich tone of pearl nebula red and understated yet elegant pearl cadet gray for the body. This Dax125 has a limited edition: the Dax 125 Tamiya Limited Edition - the idea of official Honda dealer Cub House in Thailand - which was announced at the 2023 Bangkok International Motor Show. It employs a sumptuous metallic blue body adorned with Tamiya twin star logos plus some checkered flag motifs to get the pulse racing. With dedicated stickers for the muffler heat guard and wheel rims, this version features a horn cover with Dachshund emblem, dedicated serial number for each of these limited edition bikes, and dedicated helmet with Tamiya logo. It certainly fascinated motorcycle fans - whether that be full size or in miniature scale – across the globe. Assembly kit, 1/12th scale, Length: 147mm, paints and cement are separate required Warning! Not suitable for children under 14 years.
Military figures 1:16
1:16 WWII Figure Ger.Infantry Man Winter
300036304€19.49
Article number: 300036304 Product: 1:16 WWII Figure Ger.Infantry Man Winter This is a 1/16 scale plastic figure assembly kit recreating a WWII German infantryman in reversible winter uniform. ★He is depicted in realistic pose with MP44 assault rifle in hand. ★Realistic facial expression and creases in clothing ensure a highly detailed finish. ★Depictions of ammo box, shovel, gas mask case and other accessories add a final accent to the model. Warning! Not suitable for children under 14 years.