Tamiya Product Range

Military model vehicles 1:35

1:35 BW Flak-Panzer Gepard (1)

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911 GT3 RS (992)

€45.99

Assembly model kit 1/24 scale, length: 190mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Citroen DS MB-01

Article number: 300058734 Product: 1:10 RC Citroen DS MB-01 Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknown cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

€17.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

€45.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.5mm OD Bla 2m

€4.49

Article number: 300012675 Product: 1:6/1:12/1:24 Cable 0.5mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,50mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.8mm OD Bla 2m

€4.49

Article number: 300012677 Product: 1:6/1:12/1:24 Cable 0.8mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,80mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

1:6/1:12/1:24 Cable 1mm OD Bla 2m

€4.49

Article number: 300012678 Product: 1:6/1:12/1:24 Cable 1mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 1,00mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

Braided Hose 2mm Outer Dia

€5.89

Model motorcycle kits 1:12

1/12 Kawasaki Ninja H2R

€58.99

Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 959

€25.49

Article number: 300024065 Product: 1/24 Porsche 959 The Porsche 959 was first unveiled at the 1983 Frankfurt auto show as a study for a full time 4 wheel drive Group B super sports car. Back then, the automobile was still far from being completed and its potential a mystery. The 959's awesome capabilities matured through thorough research and competition experience with the automobile. It demonstrated its outstanding abilities during the grueling Paris-Dakar Rally, and the Le Mans 24 hour endurance race. Porsche has taken their race car technology and put it into the 959, to produce a car that provides every comfort, with smooth running and the low interior noise expected of a road car, while offering high safety reserves. Thus the 959, despite its massive 450hp engine power, can be drive easily at its lower RPM ranges. The 2848cc engine is a descendent of the famous 956 and 962 Porsche Group C racer. It is an air/liquid cooled, flat 6 cylinder, DOHC equipped with two turbochargers, providing a top speed of more than 300km/h. The 959 maintains superb acceleration under all driving conditions, yet it also achieves short braking distances that prove to be a reassuring factor for all classes of drivers. The hollow wheel spokes increase air volume to the brakes and accommodate the fat, low profile Dunlop Denloc tires, and is equipped with a pressure sensor to detect punctures. The Porsche 959 is the car that raised the standard of sports car thinking to a new plateau, by exceeding every known yardstick of handling and performance.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

€22.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

RC buggys (2WD/4WD)

1:10 RC 2 WD Holiday Buggy 2010 DT-02

€144.99

Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 The Holiday Buggy was one of Tamiya’s classic R/C car kits from the 1970’s. It is available as a re-release assembly kit. The classic body comes mounted on the DT-02 chassis which has its battery pack loaded in the center of the bathtub frame providing excellent handling performance even on rough surfaces. The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control. Note: When installing a regular sized 540 motor, the following parts are required: 17T Pinion Gear (part# 3515005) 3mm Grub Screw (part# 50576) Motor Plate (part# 4305125)   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Volkswagen Beetle 1300 1966

€27.99

Article number: 300024136 Product: 1:24 Volkswagen Beetle 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come. Volkswagen 1300 Beetle   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. MG Team (5) Mid.WWII

€16.79

1/35th scale, assembly kit, 5 Figures   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Carbon Decal Twill EF

€8.19

Article number: 300012682 Product: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/extra fine, 130x 190mm sheet size, instructions.

Model car kits 1:24

Nissan Skyline GT-R R32

€19.99

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Ford GT

€53.99

Article number: 300024346 Product: 1/24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.   Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Seat Belt Set A

€7.19

Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. Kitmodel, Scale 1:20, 6-Point- Racing Seatbelt, Logosheet, Photo- etchedparts, Manual, Decal.

Model car kits 1:24

1:24 Castrol Toyota Tom´s Supra GT

€26.99

Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan R390 GT1

€36.49

Article number: 300024192 Product: 1/24 Nissan R390 GT1 About the Nissan R390 GT1 One of the most prestigious and grueling racing events held in the world is the "Le Mans 24 Hour Endurance Race". It has brought excitement and pleasure to motorsports enthusiasts worldwide, ever since it was first held in 1923. In 1997 Nissan Motor Co., Ltd. Entered their latest Nissan R390 GT1 which was developed to vie for this renowned racing event. The R390 GT1 took its name from a car, R380, that excited Japanese motor sports enthusiasts over thirty years ago. Jointly developed by Nissan and TWR (Tom Walkinshaw Racing), the R390 GT1 is the state of the art racing expertise of them. Aerodynamically refined low and sleek body styling is suggestive of Nissan's highly competitive Gr. C machines raced during the 1980's. The 3.5 liter V8 engine, producing an awesome 600 horsepower output, is bolted directly to the carbon composite monocoque and works as a load-carrying element. The tremendous power is delivered to the rear wheels via a transversely mounted, six speed transmission. The four wheel double wishbone suspension system is connected to the horizontally mounted shock absorbers via pushrods and bell cranks to provide optimum road handling performance. Three R390 GT1's were entered in to the 1997 Le Mans event and, among them, the car No. 21 achieved a pole position in the pre-qualifying race. Although the overall result was rather discouraging, the R390's outstanding performance, displayed during the early stage of the race, was something to behold and promising for the year to come.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Sand Bags (36+12)

€5.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US Military Equipm.Mod.

€13.19

Article number: 300035266 Product: 1:35 Diorama-Set US Military Equipm.Mod. This 1/35 scale set will allow you to display the equipment seen loaded on modern U.S. military vehicles. In addition to individual equipment such as large and small Alice packs, sleeping bags, and sleeping mats, the set also includes a rich selection of 12.7mm and 40mm ammunition cases, jerry cans, and water tanks. Furthermore, the set also includes ration cartons and CIP (Combat Identification Panel) which can be attached to the U.S. Modern Utility Vehicle. This accessory set includes 25 types of equipment (total of 80 pieces) and is suitable for expanding your modern U.S. military diorama It can be used with support vehicles and frontline tanks.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US/Dt.Jerry Can Set

€5.49

Article number: 300035026 Product: Gear bag 58618 Mt.Beetle This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. ★Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. ★Includes nine each of U.S. and German type jerry cans, plus three each of new and dented barrels.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Tank Ammo Load. Crew (4)

€12.29

Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★ Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★ Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models. Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set US Infant. W-Europe (8)

€7.19

Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 20mm Flakvierling 38

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

€32.99

Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1)   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. IV Ausf. D (3)

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw.IV Aus.G w/Mot. Ea.Fr.

€49.99

Assembly kit, 1/35th scale, limited Set, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig.-Set MG-Crew Maneuver (5)

€12.29

Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Skyline GT-R V-spec II

€24.99

Military model vehicles 1:35

1/35 Ger. Panther Ausf.D

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02R Chassis Kit

€199.99

Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Included: 4WD assembly Kit, TT-02 Chassis, R Version with Tuning Parts, fully ball bearings, blue anodized parts WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S

Article number: 300014129 Product: 1/12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 McLaren Senna

€64.99

Article number: 300024355 Product: 1:24 McLaren Senna Item Contents/Information • This is a 1/24 scale plastic model assembly kit. Length: 198mm, width: 91mm, height: 60mm. • The sleek aerodynamic body’s form is captured in style. Uniquely, it is composed of a single monocoque part onto which body panels are attached individually, allowing a highly realistic depiction of the car. • Parts are designed to be assembled into blocks of the same color, streamlining the painting process. • Features a realistic depiction of the V8 twin turbo engine and visible sections of the complex surrounding engineering. • The model can be assembled as European, U.S. or Japanese spec. • Separate parts for brake calipers and discs ensure that while the wheels (and brake discs) rotate, the caliper remains stationary for super realism. • The dashboard can be assembled in the standard roadgoing or streamlined racing positions. • Metal transfers recreate McLaren logos and more.

Model car kits 1:24

1:24 Porsche 934 Jägermeister

€52.99

Article number: 300024328 Product: 1/24 Porsche Turbo 934 Jägermeister The Porsche Turbo RSR 934 was a descendent of the world-famous Porsche 911 Turbo, and appeared for the first time in the Group 4 GT class in 1976. The rear-mounted 2,994cc turbocharged flat-6 engine was capable of 260hp, making it a top-of-the-line production car at the time. This model, covered in the famous Jagermeister livery, sped to victory in both the European GT Championship and the German Sports Car Championship in its debut season. The Tamiya assembly kit model faithfully captures all the details of this famous racing car in 1/24 scale. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche Turbo 1988 Roadversion

€35.99

Article number: 300024279 Product: 1/24 Porsche Turbo 1988 Streetversion Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbos impressive design and performance made it the most well known member of the 911 series. About the Porsche 911 Turbo The 911 Turbo debuted in 1975 as Porsches first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbos distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Taisan Starcard Porsche 911GT2 `95

€32.49

Article number: 300024175 Product: 1/24 Taisan Starcard Porsche 911GT2 `95 About the Taisan Starcard Porsche 911 GT Since its debut back in 1964, the Porsche 911 stable has established an unparalleled esteem, both on streets and in competitions. The "GT2" is a race ready version developed for the world's GT racing events. The traditional 911 styling has been aerodynamically refined, yet retains the unmistakable identity of the series. The rear mounted engine is the hallmark of the 911 series, powered by a water cooled, horizontally opposed six-cylinder unit. This 3.6 liter powerplant is coupled with twin-turbochargers, yielding an awesome 400 plus horsepower output. The six speed gearbox efficiently transmits this abundance of power to the rear wheels. Front MacPherson strut and rear multi-link suspension system has a sophisticated geometry for the utmost control during high speed running. The large, 380mm diameter brake disks are ventilated to take the racing abuse. They are equipped with ABS (anti-lock braking system), for the positive stopping power and safety. The unique front spoiler, with its up-turned ends, is the result of thorough wind tunnel testing. A huge, two tier rear spoiler is equipped with air ducts on both sides. The riveted over fenders add to its aggressive looks. During the 1995 Japanese GT Car Championships, Porsche entered a fleet of their GT2's, including three entries from Team Taisan. Each of Taisan's machines scored a victory during the season, bringing the coveted title to the team. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Tank Churchill Mk.VII (6)

€39.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

Military model vehicles 1:35

1:35 BW MBT Leopard 1A4 (1)

€23.99

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★ From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★ Notable details include the MG3 machine gun and searchlight. ★ Comes with a commander figure to add even more detail to your finished model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Allied Vehicle Access.

€11.99

Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger. Weapons Inf.(24)

€5.29

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger.Barrel & Jerry Can

€8.69

Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. III Ausf. L (1)

€43.99

Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

€39.99

Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 MBT Leopard 2 A7V

€59.99

Article number: 300035387 Product: 1:35 KPz Leopard 2 A7V Nearly twenty years since the release of Item 35271 (1/35 Leopard 2 A6) in 2004, Tamiya is proud to welcome the Leopard 2 A7V with totally new parts into 1/35 Military Miniature Series. The Leopard 2 A7V is an improved version of A7 (A7 is improved version of A6 and the "V" in the A7V designation stands for "verbessert" (improved) ), and features additional hull front armor and side skirts for improved defense. The suspension was also improved to help deal with the tank’s extra weight. The A7V inherits the A6’s L/55 120mm gun, but with the updated shell, the A7V can take on enemy armor up to five kilometers away. Units began receiving the A7V in September, 2021 and A7Vs saw further improvements such as turret-top stowage boxes and main sight visor. It seems with that this venerable tank’s 40-year career is set to carry on into the future thanks to its continued evolution. 1/35th scale, assembly kit, Model of the Leopard 2A7V, tools, paints and glue required   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M113 A.P.C Personal Carrier (5)

€26.49

Article number: 300035040 Product: 1:35 US M113 A.P.C Personal Carrier (5) The M113 is one of the vehicles most widely used in non-communist countries of the world and is showing activity as transport for infantrymen of free nations. Among the important features of the M113 are smallness, lightness, and therefore easiness to use. It is designed as a light armoured personnel carrier for transporting 13 fully armed riflemen including the driver, but also serves as a cargo boat, ambulance, weapon carrier, command car and reconnaissance car.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M113A2 Personal Carr. Desert (2)

€41.99

Article number: 300035265 Product: 1:35 US M113A2 Personal Carr. Desert (2) About the U.S. M113A2 Armored Personnel Carrier Desert Version Of the various M113 type personnel carriers developed, the M113A2 began production in June 1979. Based on combat experience in Vietnam, this version was made with improved transmission, operating equipment and cooling system as well as reinforced suspension. Detachable fuel tanks were moved to the rear and external sides of the vehicle, smoke dischargers were mounted on the front, and the trim vane was enlarged. M113A2 units were deployed to the Gulf War in 1991, and in the 2003 Iraq War. M113A2s active in Iraq were also equipped with Combat Identification Panels (CIP), the latest friend and foe recognition device to prevent friendly attack. About the Model ★Overall length 153mm ★Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. ★CIP attached on both sides. ★Gun shield can be attached to M2 machine gun. ★Plenty of extra attachments including personnel equipment and ammo cases. ★Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Sherman M4A3 75mm Late (9)

€43.99

Article number: 300035250 Product: 1:35 US Sherman M4A3 75mm Late (9) About the Model ★Plastic assembly model kit based on the main tank of the WWII U.S., the M4 Sherman. ★Overall length: 172mm, overall width: 76mm. ★The smooth form of the cast turret with 75mm gun and welded hull of this late production M4A3 tank overflow with realism. ★Two kinds of commander's cupolas; loader's hatch and other hull and turret hatches can be modeled in the open or closed position. ★Two kinds of road wheels and sprockets can be selected; rubber padded tracks also included. ★Three crewman and one tank commander in realistic poses bring an air of excitement to the kit. ★Included equipment includes ammunition boxes, tripod, ration boxes, and much more. ★Three types of decals included.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Diorama-Set Tent w/Radio(1)

€6.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Jerry Can Set (12) Early

€6.99

Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Zimmerit Dekor-Satz Tiger I

€11.29

Article number: 300012647 Product: 1/35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved.

Model ships 1:350

1:350 Musashi 2013

€114.99

Article number: 300078031 Product: 1:350 Musashi 2013 Jap. Battleship The Musashi was the second ship in the Yamato-class which were the largest battleships ever built. Completed in 1942, the Musashi took part in various campaigns before finally meeting her fate at the hands of U.S. Navy aircraft in the Battle of Leyte Gulf. Tamiya"s precision-made assembly kit model recreates this giant battleship in exquisite detail, including her defensive anti-aircraft suite of numerous single 25mm cannons on the main deck. This different anti-aircraft armament makes for an interesting comparison with the Yamato. Tamiya rereleased Musashi in 1981 and this great model kit is available again with new mast parts. - Comes with a display stand. - Comes with newly-designed mast parts.

Model ships 1:350

1:350 WWII Ger. Battleship Bismarck

€82.99

1/350 Bismarck

Model aircraft kits 1:48

1:48 US North American P-51D Mustang

€29.99

Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Ger. Messerschmitt Bf109E-3

€15.99

Article number: 300060750 Product 1:72 Ger. Messerschmitt Bf109E-3 Without a doubt, the Messerschmitt Bf109 can be clamed as the most famous and successful German aircraft from the WW2. It was the world´s most advanced fighter at that time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible air frame built around the most powerful engine available. It also boasted many of the then innovated features such as an all metal stressed skin construction, retractable main landing gear. Automatic Handley-Page leading edge slats, etc. The Bf109 saw the first combat during the Spanish Civil War and fully demonstrated it exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvements throughout its carrier, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used and improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Detailed Plastic Kit of model Messerschmitt Bf109E-3 in scale 1:72   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Braided Hose 2.6mm Outer Dia

€6.19

Model aircraft kits 1:72

Kawanishi Shiden Type 11

€14.79

Article number: 300060768 Product: 1/72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailed Plastic Kit of model Kawanashi Shiden Type 11 in scale 1:72   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

SEIRAN

€13.99

Article number: 300060737 Product: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailed Plastic Kit of model SEIRAN in scale 1:72   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Lotus Super 7 Series II

€29.99

Article number: 300024357 Product: 1/24 Lotus Super 7 Series II The Super 7 is a legendary kit car that has spawned legions of fans since its release in 1957, and lives on today, manufactured by Caterham. Lotus developed and sold Seven cars first, however, and the souped up Super 7 version of the car was powered by a 4-cylinder 1.3-liter Ford Cosworth engine, achieving a top speed of over 160km/h. Simple yet effective designs such as rack and pinon steering and drum brakes made its assembly accessible to the home constructor. • This is a 1/24 scale plastic model assembly kit. Length: 139mm, width: 61mm. • The familiar, cosy form of the car is recreated in detail. • Features a realistic recreation of the Ford Cosworth engine under the opening hood. • Decals have been redesigned for this model, and also included are a new choice of seatbelt stickers. • C Parts are now molded in white for easier painting. • Choose whether to assemble as a road car, or a Clubman racer (with dedicated racing screens and roll bar). • Features a new instruction manual with updated 4-language cover story.

Model car kits 1:24

1/24 Mazda MX-5

€47.99

Article number: 300024342 Product: 1/24 Mazda MX-5 2015 saw the debut of the 4th generation Mazda Roadster (MX-5), the iconic car with a heritage dating back to 1989. This dynamic lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North America) engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. Tamiya has faithfully captured the NEW roadster in 1/24 scale! Details include; option to choose left or right hand drive, soft top in folded position and highly detailed interior.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Brummbaer Late Production

€56.99

Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Wespe Italian Front

€42.99

Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.

Military model vehicles 1:48

1/48 JGSDF Type 16 MCV

€31.99

Article number: 300032596 Product: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.

Model motorcycle kits 1:6

1/6 Link-Type Motorcycle Chain

€44.99

Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.

On-road RC cars (2WD/4WD)

1:10 RC Audi Quattro A2 (TT-02)

€154.99

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Monte-Carlo 99 (TT-02)

€164.99

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC MB G-Class G500 (CC-02)

€294.99

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3 (992) TT-02

€159.99

Article number: 300058712 Product: 1:10 RC Porsche 911 GT3 (992) TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC Racing Fighter (DT-03) The Real

€96.99

Article number: 300058628 Product: 1:10 RC Racing Fighter (DT-03) The Real Say hello to the new model on Tamiya's easy-to-assemble, rough and tumble DT-03 buggy chassis! It features a brand new polycarbonate body design with attractive, boxy lines and a stylish rear wing. Customers outside of Japan will be delighted to hear that the export version of this kit exclusively features a torque-tuned motor and CVA oil dampers. About the Model • This is a 1/10 scale R/C model assembly kit. • Features a stylish new body molded in durable and lightweight polycarbonate. Brand new stickers are included to decorate the model. • The DT-03 uses a tough monocoque frame. Big wheelbase (288mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance off-road! • Front arms are at a 25-degree angle for great off-road driving. Dampers are high-performance CVA oil shocks. • A torque-tuned motor is included in the export version ONLY. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Lightweight kit with detailed and illustrated assembly instructions, motor, controller Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 ST185

€154.99

Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota Land Cruiser LC300 CC-02

Article number: 300058688 Product: 1:10 RC Toyota Land Cruiser LC300 CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 300 as our new R/C model on the cross country CC-02 chassis. Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. In August 2021, Toyota Land Cruiser 300 series was released with full model change for the first time in fourteen years. Added to its inherited styling from the 200 series, an enlarged front grille gives a powerful and prestigious image. Ladder frame chassis and rigid axle rear suspension allow hard off-road performance. This car is powered by a 3.5-liter V6 gasoline twin turbo engine or 3.3-liter V6 diesel twin turbo engine, and features 10-speed automatic transmission. This R/C model assembly kit recreates the top grade ZX model of the Land Cruiser 300 series. Included: 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, Polycarbonat Body, Type 540 Motor, LED Light-Unit, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition

€27.99

Article number: 300014142 Product: 1:12 Honda Dax 125 TAMIYA Edition Tamiya is proud to announce the release of the Honda Dax125 Tamiya Limited Edition as a new addition to our 1/12 Motorcycle Series. (The first generation Dax in 1969 was recreated by Item 16002.) Following on from the popular Monkey (Z-series) bikes, the Honda minibike Dax was announced in 1969. The Dax had a distinctive T-bone frame crafted in pressed steel which housed the fuel tank, and centrifugal clutch engine. It was designed to be ridden by anyone, anywhere, and its charming, distinctive form was loved all around the world. Although its Japanese sales finished in 1981, the Dax returned in 1995 with a similar design to the original. In 2022, Honda announced the Dax125 which inherits the established Dax identity, incorporating elements such as the T-bone frame, a long bench seat, a chrome upswept muffler and more. It can be ridden both on city streets and the open road. Owners can choose between the rich tone of pearl nebula red and understated yet elegant pearl cadet gray for the body. This Dax125 has a limited edition: the Dax 125 Tamiya Limited Edition - the idea of official Honda dealer Cub House in Thailand - which was announced at the 2023 Bangkok International Motor Show. It employs a sumptuous metallic blue body adorned with Tamiya twin star logos plus some checkered flag motifs to get the pulse racing. With dedicated stickers for the muffler heat guard and wheel rims, this version features a horn cover with Dachshund emblem, dedicated serial number for each of these limited edition bikes, and dedicated helmet with Tamiya logo. It certainly fascinated motorcycle fans - whether that be full size or in miniature scale – across the globe. Assembly kit, 1/12th scale, Length: 147mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-RR #55 2006

€56.99

Article number: 300014109 Product: 1/12 Kawasaki Ninja ZX-RR #55 2006 The Ninja ZX-RR was Kawasaki's first MotoGP machine equipped with a 4-stroke engine, and after overcoming initial teething problems, began to show its potential. With the addition of rider Shinya Nakano in 2004, the team kept improving and became capable of challenging the top teams for race honors. Nakano rode the lime-green, 990cc-engined machine to a second place podium finish at Round 8 in the Netherlands for his best finish of the 2006 MotoGP season. Features: Cowlings can be attached/detached using precison-made screws to showcase accurately reproduced internal details. Rear suspension feature realistic nut fastener. Wrench tool is conveniently included to aid assembly. Brilliant livery can be recreated using Tamiya paints (Light Green & Semi Gloss Black), with sponsor logos provided by beautiful Cartograf decals. Synthetic rubber racing slick tires with Bridgestone markings provide an authentic race feel. Markings for both Shinya Nakano's No.56 and Randy de Puniet's No.17 included   Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Figure Ger. Infantry Man

€18.99

Article number: 300036303 Product: 1:16 Figure Ger. Infantry Man This is a 1/16 scale plastic figure assembly kit depicting a WWII German infantryman in late-war camouflage. ★The infantryman is captured in action pose, aiming his MP40 with elongated stock. ★Separate parts are also included for various accessories such as ammo and gas mask cases, grenade, shovel and more.   Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 WWII Figure Ger.Infantry Man Winter

€19.49

Article number: 300036304 Product: 1:16 WWII Figure Ger.Infantry Man Winter This is a 1/16 scale plastic figure assembly kit recreating a WWII German infantryman in reversible winter uniform. ★He is depicted in realistic pose with MP44 assault rifle in hand. ★Realistic facial expression and creases in clothing ensure a highly detailed finish. ★Depictions of ammo box, shovel, gas mask case and other accessories add a final accent to the model.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Zakspeed Capri Turbo MAMPE

€30.99

Tamiya presents an updated new edition of the model 24014 Ford Zakspeed Capri Turbo in 1:24 scale with new Cartograf decals, updated assembly instructions and packaging. The German Racing Championship (DRM) comprised two classes with displacements of 2,000 cm³ and more and under 2,000 cm³. The Ford Zakspeed Capri Turbo was a vehicle that challenged the BMW 320 Turbo. It made its debut at the eighth DRM round in Hockenheim in the summer of 1978 and was characterized by an extremely low front end, a wide body and eye-catching red and yellow markings on a black background. This car regularly raced in the leading group and took its first victory in the spring race at the Nürburgring in October 1978. The following year, it finished second in the first DRM race in Zolder and won the second race in Hockenheim.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Lancia Stratos Turbo

€34.99

Assembly model kit 1/24 scale, Shaped Motor, including one driver Figure

Model car kits 1:24

1:24 Mercedes-Benz 300SL Full-View

Assembly model kit 1/24 scale, Shaped Motor, transparent body   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911GT3 ´99 Streetversion

€35.99

Article number: 300024229 Product: 1/24 Porsche 911GT3 ´99 Streetversion About the Porsche 911 GT3 Since its debut in 1963, the epoch-making Porsche 911 has captivated generations of sports car enthusiasts. Over the years, various models of the 911 have been released, including the 1998 Le Mans-winning 911 GT1. In 1999, the "heart" of that automotive masterpiece, the water-cooled flat-six engine, was inherited by the Porsche 911 GT3. The brainchildren behind that machine are Porsche's development engineers in Weissach, who imbued it with superior agility and handling, without compromising active safety. Capable of accelerating to 100km/h in a mere 4.8 seconds, and with a top speed of 302km/h, the GT3 achieved a new record for production cars when it completed a lap on the northern circuit of Nuerburgring in only 7.56 minutes. The exterior appearance of the GT3 remains true to that of its predecessors, but features a new rear end, discreet side-sills, fixed rear wing, red brake calipers and sporty 18-inch light-alloy wheels. Compared with the 911 Carrera, the four-piston aluminum fixed monobloc brake calipers are larger and sturdier than before, and tightly grip the perforated brake discs. The GT3 cockpit is true reflection of its performance. It features leather-covered bucket seats, which ensure not only ample side support, but also comfort on long journeys and provide about 20kg of weight savings. And since the entire rear-seat section of the car has been dropped, the overall weight of the GT3 was reduced by another 8kg-a true benefit for a sports car of this performance level. Tamiya has recreated this epoch-making sports car in 1/24 scale. The intricate engine is visible when model is viewed from below. The upper surface features a four part rear-wing construction, enhancing the sophistication of the body design. Kit also comes with the Porsche emblem, authentically recreated as a metal transfer. The inside of the detailed cockpit includes a carpet seat for the floor. Glossy metallic parts are used on the wheels, headlight reflectors, door mirrors and muffler.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru Impreza WRC 2001

€34.49

Article number: 300024240 Product: 1/24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai.     Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota GR Supra Custom

€38.99

300024371 1:24 Toyota GR Supra Custom Assembly model kit 1/24 scale, length: 183mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Bundeswehr Leopard 2A6 (3)

€63.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Brick Wall (22)

€5.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger.Engine Maint.Cr.(2)

€16.29

Article number: 300035180 Product: 1:35 Diorama-Set Ger.Engine Maint.Cr.(2) This set will easily allow you to depict a scene of WWII German tank engineers preparing to work on an engine. ★In addition to two engineer figures in overalls, engine parts for a Maybach HL230 engine which powered Tiger I, Panther, and King Tiger tanks are included. ★It also includes accessory parts to depict tools, toolboxes, an oiler, a burner, a drum can etc. to provide your diorama with a greater realistic presence.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Tank Barricade

€5.49

Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★ Creates six each of wooden and metal barricade depictions. Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US Infantry-Weapons

€6.49

Article number: 300035121 Product: 1:35 Diorama-Set US Infantry-Weapons This is a 1/35 scale plastic model assembly kit depicting typical WWII U.S. weaponry. ★A comprehensive set includes various pistols, the M1 rifle, M2 carbine, Thompson submachine gun, M2 heavy machine gun, M2 mortar, bazookas, M18 recoilless rifle and various other subjects. ★Also comes with accessories such as ammo cases, rounds, gas marsks and more.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Brit. Infant. Patrol. (5)

€11.99

Article number: 300035223 Product: 1:35 Fig-Set Brit. Infant. Patrol. (5) This is a 1/35 scale set of five British infantrymen which includes a squad leader, an ammunition loader, and riflemen who are cautiously carrying out a patrol. Set includes each squad member depicted in natural poses with realistic expressions. Accessories such as the Sten sub machine gun, Bren light machine gun, Enfield rifles, haverasacks, and back packs all have a fine finish.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Field Commander (5)

€20.49

Article number: 300035298 Product: 1:35 Fig-Set Ger. Field Commander (5) WWII German Commanders This 1/35 scale plastic assembly kit contains five WWII German field commander figures. ★The set includes an high-rank officer pointing out the target holding a map, a commander with a briefcase and a map case, a commander with a MP40 gun, a low-rank officer checking his Luger P08 gun, and a radio operator. ★The MP40 and Luger P08 guns as well as holsters, briefcase, and the radio have a rich finish. About the Uniforms and Equipment The German commanders wore uniforms which had same design as those of soldiers during WWII. However, commanders were allowed to wear tailor-made uniforms made from nicer materials. Likewise, they also wore better quality coats as well as leggings and boots. They usually carried guns such as the Luger P08 and Walther P38, but often used MP40 machine guns to fight against enemies on the frontlines.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Tank Crew Rest(6)

€10.99

Article number: 300035201 Product: 1:35 Fig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.

Military model vehicles 1:35

1:35 Ger. 38to Tank Destr. Hetzer (1)

€56.99

Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Floating Car Typ 166 (1)

€18.99

Article number: 300035224 Product: 1:35 Ger. Floating Car Typ 166 (1) This is a plastic assembly model kit of the 4WD Schwimmwagen which earned the trust of German soldiers with excellent performance on bad roads and fording ability. The body with hull-shaped underside has been reproduced via slide molding for a realistic finish and ease of assembly. The windshield is moveable and the screw can be positioned in the down position to allow you to depict a fording scene. Parts to depict the air-cooled four-cylinder engine also included. Interior details such as the flooring & seats, instrument panel, shift lever etc have a rich finish. The folded canvas roof cover also provides the model with great realism. A driver figure is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Marder I Tank Destroyer

€37.99

Article number: 300035370 Product: 1:35 Ger. Marder I Tank Destroyer This is the latest subject in the long-running Tamiya 1/35 Military Miniature Series. The Marder I was one of the early German efforts to update a military that – despite crushing early successes against Poland and the Allied early in WWII – was in sore need of mechanization. Based upon the French Lorraine supply tractor, it was one of a number of commandeered vehicles pressed into German service. Around 170 were produced from May 1942, and their 7.5cm Pak40 anti-tank gun was a threat to Allied AFVs in France post-Normandy landings, and also on the Eastern Front and even North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • Tamiya designers worked up close with a specimen in the Musée de Blindés, Saumur. The result is a highly accurate depiction of the compact chassis and bulging upper hull, complete with rivet and weld line details. • Interior features gun breech detail, sights, racks, radio equipment and more. • Assembly type tracks have single piece straight sections. • Bogies have an ergonomic parts breakdown. • Two figures are pictured looking to the skies, hinting at the breakdown of air control from their Luftwaffe after the Normandy landings. • Comes with three marking options, two from Normandy and one from the Eastern Front.

Military model vehicles 1:35

1:35 Ger. PaK 38 5cm w/ Crew (4)

€23.49

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

€82.99

Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 KS600 Sidecar combination (3)

€19.99

1/35th scale, including Motorcycle, Sidecar and 3 Figures   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 US 10-in-1 Cartons WWII

€4.29

Article number: 300012689 Product: 1:35 US 10-in-1 Cartons WWII These detailed depictions of WWII 10-in1 ration cartons were initially a part of Item 25196, but are now to get their own release in the Detail-Up Parts Series. The 10-in1 Ration was supplied to U.S. troops from 1943 to 1945. One sleeved carton contained four individual boxes, each a day’s rations for ten soldiers and including canned food, biscuits, cereal and more. Item Contents/Information • Sheet dimensions: 200mm x 195mm. • Contains cut-out illustrations for sleeve, carton and inner box components. • One sheet can be used to make eight sets, and you can choose to depict the carton sealed up or even removed from the sleeve and open to reveal the inner boxes. • The sheet also features a basic explanation of the 10-in-1 ration in English and Japanese. • An excellent choice to add further detail to WWII-era U.S. subjects such as those below. Kit model, scale 1:35, Cardboard sheet with 8 catering cardboard, sheet size 200x195mm, Suitable for models from the period of the 2nd World War.

Military model vehicles 1:35

1:35 US M151A2 Ford MUTT Truck (1)

€13.99

Article number: 300035123 Product: 1/35 US M151A2 Ford MUTT Truck (1) The U.S. Armoured vehicle test course is located in Aberdeen, Maryland, and is one of the most rigorous and demanding coursed in the world. Early in April 1957, a familiar looking small vehicle was seen to be running over the course with comparitive ease, and upon closer inspection it turned out to be the replacement for the well known Willy's "Jeep", the new Ford M151. Outwardly this new vehicle loos very much like its older brother. Both are small, compact, rugged, simple to operate and maintain; however, the 151 incorporates all of the latest advanced features learned during combat operations in conflicts since world war II. Features such as the newly developed OHV engine, light semimonocoque body and 4 wheel independent suspension systems allowed it to outpoint all other submitted replacement vehicles for the ageing WWII Jeep. Development for this replacement vehicle was started by the Ford Motor Company were licensed to produce the vehicle and they delivered approximately 10,000 units a year to the U.S. Army, Navy Air Force and Marines. Shortly after its adoption it was selected by most of the nations of the free world as a replacement for their own light utility vehicles. Some of the advanced features incorporated into the M151 caused problems and defects were detected in the initial shipments, among the most serious was the strength and stability of the rear suspension system which was corrected and improved in 1964 and 1970. The M151A2 now in service has added safety features like stiffer rear suspension, large blinder lamps and a two step windshield wiper, safety glass and an impact absorbing steering wheel. With its extreme versatitliy the basic M151 can be altered into a combat ambulance; radio communications vehicle; 105mm recoilless rifle transport and a launcher for the new tow missile system adopted in the late 70's. Combat experience in VietNam has shown that the Ford M151 Military Utility Tactical Truck (MUTT) is indeed a very versatile go anywhere combat weapon and is likely to remain in service for years to come with military forces worldwide. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig-Set Ger.Infant. Winter (5)

€14.99

Article number: 300035256 Product: 1:35 WWII Fig-Set Ger.Infant. Winter (5) In a crouched position, these soldiers are very cautious of their surroundings while pushing forward following a tank. Such a tense frontline scene can now be displayed with this plastic assembly model set which includes five German soldier figures wearing winter uniforms, cotton-made smocks, and realistically reproduced winter overcoats seen during the middle stages of WWII. The noncommissioned officers are depicted carrying weapons such as an MP40 submachine gun and rifles and standing in lower poses than their field commander who has a Walther P38 and a grenade in each hand. Set includes five figures.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Milit.Insignia Decal Vol.2

€11.79

Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35

Military model vehicles 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the current standard, these Pzkpfw II look quite inferior both in fire and defensive powers. But when compared with those of other countries active at the time, the Pzkpfw II should be ranked as by far the most superior one. Indeed, its nimble mobility matching well with the German application was the driving force of the spectacular victory won by the Germans at the initial period of the World War II.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Bf109 G-6 Messerschmitt

€49.99

Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

Model aircraft kits 1:48

1:48 Ger. Messerschmitt BF109E-4/7 Trop

€28.99

Article number: 300061063 Artikelbezeichnung: 1:48 Ger. Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 US Vought F4U-1A Corsair

€28.99

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.65mm OD Bla 2m

€4.49

Article number: 300012676 Product: 1:6/1:12/1:24 Cable 0.65mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,65mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model aircraft kits 1:48

Avro Lancaster N Mk.I-III

€109.99

  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

Focke-Wulf Fw190 A-3

€15.99

Article number: 300060766 Product: Focke Wulf Fw 190 A-3 Development of the FW190 series began in the Autumn of 1937, under a contract issued by the Reichsluftfahrtministerium (Air Ministry) for a single seat fighter to supplement the Messerschmitt Bf109. Two proposals were submitted by Kurt Tank, the technical director of the Focke-Wulf Flugzeugbau (aircraft factory). The proposal using the then new BMW 801 aircooled radial engine was chosen. This tough and powerful engine was placed in a robust airframe and provided superb handling, well balanced control, and brisk acceleration. It entered service in 1941, flying alongside the Bf 109 and it soon took control of air superiority over the English Channel. Establishing itself as a mainstay fighter of the Luftwaffe, it outperformed the contemporary Spitfire Mk.V's in almost every respect and maintained this advantage until the arrival of the Spitfire IX in July 1942. The Fw190 fighter underwent constant improvement throughout its life. The A-3 version used the improved BMW 801Dg engine that produced 1,700hp. Armament was increased from four to six guns, consisting of two rapid firing MG151's in the wing roots; two MG FF's outboard of the landing gear and two fuselage mounted MG 17 machine guns. Throughout WW2, many Luftwaffe squadrons allowed personal pilot markings and distinctive squadron insignia to be used, plus lower cowl, wing tip and rudder color additions to the original paint schemes. Detailed Plastic Kit of model Focke Wulf Fw 190 A-3 in scale 1:72   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

Honda CB750F

€24.99

Article number: 300014006 Product 1:12 Honda CB 750F The Honda CB750F Motorcycle appeared on the Japanese market in June 1979 and was shortly to become the best seller in the 750 class. Just ten years prior to their 750F release, Honda opened up the field of multicylinder bikes with their now famous four cylinder CB750. Honda had won several Grand Prix motorcycle races with multi-cylinder bikes, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power, and so shocked the industry that shortly many of the famous makers produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their "Z" series DOHC 4 cylinder 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB750K DOHC with four valves per cylinder, a powerful 68hp, and new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F which had been copied from their racing RCB bike. This styling was new to stock motorcycles in the world. With the low positioned handle bars and rear positioned foot rests, allowed a "slouched" riding position. The style is setting the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, semi-air front suspension system, and FQV damped rear coils. Braking utilizes the dual piston caliper system, with dual discs in front and a single disc at the rear. A newly designed racing type front fender with spoiler has proved to be very popular among the bike enthusiasts. The overall styling of that unveiled in 1979, with the smooth flowing lines from tank to tail light have been retained, and it is likely that this fine motorcycle will stay at the forefront of sales for years to come. Honda CB750F

Model car kits 1:24

MB 500 SEC

€33.49

300024029 1:24 Mercedes-Benz 500 SEC Assembly model kit 1/24 scale, length: 209mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nismo GT-R LM Calsonic

€28.49

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Silvia K's

€18.99

Model car kits 1:24

Nissan Skyline GT-R V-Spec R33

€25.49

Model car kits 1:24

Peugeot 206 WRC

€29.99

Model car kits 1:24

Subaru Impreza WRC 98

€26.99

Model motorcycle kits 1:12

1/12 Honda Monkey 125

€36.49

Article number: 300014134 Product: 1/12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.

Model motorcycle kits 1:12

1/12 Yamaha YZF-R1M

€49.99

Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.