Model PS spray paint
Specialised in RC bodywork: model PS spray paints for perfect results: optimum adhesion, brilliant colours and long-lasting quality for your project!
PS spray paints
PS-XX Dark Blue Polycarbonate Spray Paint 100 ml
300069944€12.49
PS-XX Dark Blue is a 100 ml spray paint for polycarbonate bodies, made for model shell finishing where the coating needs to match the body material. The dark blue shade gives RC bodyshell projects a strong, even color base that reads clearly on curved fenders, roof sections and side panels. As part of the PS paint range, this spray is intended for use on polycarbonate shells rather than general household surfaces. That material focus matters during body preparation, because RC shells flex and carry molded contours, window lines and wheel arch shapes that need a coating suited to the substrate. The 100 ml content gives useful capacity for complete coverage on many shell layouts and also supports follow-up work such as reinforcing color depth in selected areas. In multi-step paint schemes, Dark Blue can serve as the main body color or as one section within a masked design. On the bench, the can fits naturally into body finishing work for touring cars, buggies or other RC shell projects that use polycarbonate. It suits fresh builds, replacement bodyshells and repaint work where a defined dark blue tone is needed for a clean, model-focused finish.
PS spray colours
PS-5 Black, polycarbonate spray paint, 100 ml
300086005€10.991 l = €109.90
PS-5 Black brings a dedicated spray format to polycarbonate model finishing, combining a deep black colour with the quick, even coverage of an aerosol can. The 100 ml content gives a usable amount for coating bodyshell sections, laying down backing coats or refining darker design areas on compatible model parts. This paint is identified for polycarbonate, which matters when the surface calls for a formula intended for that material rather than a general craft coating. The spray can format helps cover curved panels, roof sections and side areas with a continuous pass instead of brush marks. Black also plays several concrete roles in model finishing, from solid single-colour bodies to contrast sections, window borders and visual depth behind brighter outer colours. The compact can size stores easily with other workshop supplies while keeping the colour reference simple through the PS-5 designation. On the bench, PS-5 Black fits paint preparation for RC bodyshell projects, replacement shells and detail-led custom schemes. It also suits repeat finishing sessions where the same black tone is needed across separate polycarbonate parts or later repaint work. Warning! Not suitable for children under 14 years.
PS spray colours
PS-1 White, polycarbonate spray paint, 100 ml
300086001€10.991 l = €109.90
PS-1 White brings a dedicated spray paint option to polycarbonate model work, with a 100 ml aerosol format that suits clear RC bodyshells and other compatible parts. The white tone gives shells a crisp, high-contrast finish that stands out on track layouts, display shelves and custom builds alike. The formula is specified for polycarbonate, which matters when painting flexible model bodies that need the right type of coating. The aerosol can lays paint over broad roof sections, curved fenders and narrow contour lines with a continuous spray pattern that is difficult to match with a brush. White also works across several finishing approaches: as a full body colour, as a bright backing coat behind other colours, or as a clean base under decals and racing graphics. In model projects with layered paint plans, that flexibility in colour use helps keep the finish clear and readable. This spray paint fits naturally into RC body preparation, repaint work and fresh custom schemes. It can be used when refreshing a well-run bodyshell, finishing a newly cut shell or setting up a motorsport-inspired livery with strong contrast and clear panel definition. Paints are required separately. Warning! Not suitable for children under 14 years.
PS spray colours
PS-31 Clear Smoke, polycarbonate spray paint
300086031€10.991 l = €109.90
PS-31 Clear Smoke brings a transparent smoked tint to polycarbonate model surfaces in a 100 ml spray can, giving RC bodyshell projects a darker finish while keeping clear sections visually defined. The aerosol format suits broad curves and recessed contours alike, so shells, windows and detail areas can be coated with a consistent mist from the can. This paint is specified for polycarbonate, making it a direct match for model bodies formed from that material rather than a general craft coating. The Clear Smoke effect works where a transparent dark tone is needed instead of a solid colour, such as tinted windows, light sections or layered visual accents on racing and road car shells. The can format also supports quick coverage on larger body panels that would take longer with brush application. For multi-step finishing, PS-31 can be worked into masking plans and staged colour layouts on the inside of a shell, depending on the design being built. On the bench, the 100 ml volume suits both single-shell projects and detail-focused finishing sessions where several clear sections need the same tone. In RC body painting, it fits naturally into builds that call for smoked glazing, darker lamp treatment or added contrast across transparent molded parts. Warning! Not suitable for children under 14 years.
PS spray colours
Polycarbonate Body Cleaner, model paint prep 40ml
300087118€7.591 l = €189.75
Polycarbonate Body Cleaner is a 40 ml surface-prep solution for polycarbonate bodies that streamlines the stage before painting. Instead of washing a shell with detergent, waiting for it to dry and then moving on to colour work, this cleaner prepares the surface directly so paint prep can start sooner on clear or coloured body panels. The formula is intended for hobby maintenance as well as refinishing work. It removes oils and grease from the body surface before paint is applied, and it can also remove completely dried paint when a shell needs to be stripped back for another finish. Scuff marks from normal roll overs during everyday driving can be cleaned away without damaging the body surface, which makes the bottle useful beyond the paint bench. An added antistatic agent helps reduce static electricity build-up on the R/C model, a practical detail when handling lightweight polycarbonate shells. On a workbench, the cleaner suits body preparation before masking and painting, and after running sessions it can be used to freshen marked areas on the shell. The compact bottle format keeps the liquid easy to store with other model supplies while staying ready for regular body care. Warning! Not suitable for children under 14 years.
PS spray colours
PS-55 Flat Clear, polycarbonate spray paint
300086055€12.191 l = €121.90
PS-55 Flat Clear is a polycarbonate spray paint designed to give RC bodyshells a matt clear finish while preserving selected glossy details. Applied over the inside of a polycarbonate body, the coating changes the surface effect without covering the underlying colour, so the shell keeps its painted appearance with a flatter final look. The masking method is what makes this spray especially useful for detailed bodywork. Headlights, windows, rear lights and other areas that should stay glossy are masked from the outside before spraying, while the remaining surfaces receive the flat clear coat. This creates a clear visual contrast between transparent or light-style sections and the surrounding panels. The 100 ml can suits hobby bench use and gives enough material for focused finishing work on model car bodies and similar formed polycarbonate parts. In workshop use, PS-55 fits the final stage of body preparation, when a painted shell needs a different surface character rather than a new colour. It works well for race bodies, road car shells and custom RC projects where matt panels and glossy detail zones need to sit side by side with a clean, controlled result. Warning! Not suitable for children under 14 years.
PS spray colours
PS-23 Gun Metal Grey, spray paint, 100 ml
300086023€10.991 l = €109.90
PS-23 Gun Metal Grey brings a dark metallic tone to polycarbonate model surfaces in a 100 ml spray can, giving RC bodyshell projects a finish that reads clean and mechanical under workshop light. The aerosol format suits broad shell panels and curved sections where an even colour layer matters across the full shape. This paint is specified for polycarbonate, so it matches the material used on many RC car bodies rather than serving as a general craft coating. The Gun Metal Grey shade sits in the technical, motorsport end of a colour scheme and works well for single-colour shells, layered race liveries or darker accent sections. Direct spray application helps cover rooflines, arches and side panels with a continuous coat that would be harder to achieve with a brush. The can format also keeps the paint ready for quick colour sessions on fresh bodyshell projects or repaint work. On the bench, PS-23 fits the stage where a clear shell moves into its final visual identity through colour and finish. It suits hobby painting sessions focused on RC car bodies, custom body panels and replacement shells that need a polycarbonate-specific coating in a compact 100 ml size. Warning! Not suitable for children under 14 years.
PS spray colours
PS-12 Silver, polycarbonate spray paint, 100 ml
300086012€10.991 l = €109.90
PS-12 Silver brings a metallic silver finish to polycarbonate model bodies in a 100 ml aerosol can, giving RC shell projects a colour option matched to this specific surface type. The spray format supports direct application to clear body panels, where an even coat and consistent coverage matter across curved fenders, roofs and side sections. The can is identified as Tamiya Color for polycarbonate, with PS-12 marking the exact shade reference for repeat purchases and matching across multiple builds. This is a spray paint for model use rather than a general craft coating, so the formula is positioned around polycarbonate shell work in the modelling bench setup. The silver tone suits race-inspired liveries, single-colour finishes and layered custom schemes where metallic brightness is part of the visual effect. The 100 ml net volume gives a clear quantity reference when planning one shell or several smaller paint jobs. On the bench, PS-12 Silver fits the stage where a clear body takes on its final character through colour, whether the goal is a clean competition look or a reflective custom finish. It can be kept alongside other model finishing supplies as a dedicated polycarbonate spray option for repeat RC body projects. Warning! Not suitable for children under 14 years.
PS spray colours
PS-16 Metallic Blue, polycarbonate spray paint
300086016€10.991 l = €109.90
PS-16 Metallic Blue brings a reflective blue finish to polycarbonate model surfaces in a 100 ml aerosol can, making it a focused choice for RC bodyshell painting and other compatible hobby applications. The spray format supports fast, even coverage across broad panels, roof sections and curved contours that are awkward to coat with a brush. This paint is specified for polycarbonate, so the material match is clear when planning colour work on transparent shells and formed body parts. The PS-16 colour code also helps when a build or repaint calls for the same shade again on a replacement shell or a second body. Metallic pigment changes the look of the surface as light moves across edges, arches and raised details, which gives shaped panels more visual depth than a flat solid tone. The 100 ml can size keeps the format compact on the workbench while still offering enough paint for dedicated modelling tasks. In practical use, PS-16 fits the stages where a shell has been prepared and is ready for colour, whether the goal is a fresh race body, a repaired panel section or a matching repaint for an existing model. It also works well as part of a planned finishing setup where several coded colours are used across different bodyshell areas. Warning! Not suitable for children under 14 years.
PS spray colours
PS-2 Red, polycarbonate spray paint, 100 ml
300086002€10.991 l = €109.90
PS-2 Red is a spray paint for polycarbonate model bodies, supplied in a 100 ml can for hobby finishing work on RC shells and other compatible clear body parts. The red shade gives body panels a strong, clean colour presence that reads clearly across curved surfaces and larger sections alike. The polycarbonate-specific formulation makes this paint relevant where the body material matters, especially on shells that need a coating matched to that substrate rather than a general craft paint. In aerosol form, the paint can be applied across roof sections, side panels and wheel arch areas with steady passes that suit broad exterior coverage. The 100 ml volume gives a practical amount for body painting tasks while keeping the can compact in the workshop. PS-2 Red also fits colour-led custom builds where a single solid tone forms the base for further detailing, masking or racing-style graphics. On the bench, the can suits preparation for RC body finishing, touch-up work on compatible painted sections, or a fresh colour scheme for a new shell. In a model workshop setting, the red tone stands out on track-inspired designs and gives custom body projects a clear visual focal point. Warning! Not suitable for children under 14 years.
PS spray colours
PS-15 Metallic Red, polycarbonate spray paint
300086015€10.991 l = €109.90
PS-15 Metallic Red is a spray paint for polycarbonate model bodies, bringing a vivid metallic finish to RC shells and other clear formed parts. The aerosol format pairs the colour with quick, broad application, so large roof sections, side panels and curved fenders can be coated with a steady pass rather than brush strokes. The formula is specified for polycarbonate, which matters when painting flexible clear bodies used in model building. With 100 ml in the can, the volume suits full-body colour work as well as smaller repaint jobs on replacement shells or selected sections. Metallic Red gives the surface a brighter, more reflective look than a flat tone, so pressed lines and shaped contours read more clearly once the body is mounted. The spray can format also helps reach recessed areas, wheel arch curves and long side sections with a consistent coat. In a hobby workspace, PS-15 fits naturally into body finishing before decals and final assembly. It can be used when refreshing a well-run shell, matching a replacement body to an existing chassis, or setting a bold colour base for a new RC build. Warning! Not suitable for children under 14 years.
PS spray colours
PS-3 Light Blue, polycarbonate spray paint
300086003€10.991 l = €109.90
PS-3 Light Blue is a spray paint for polycarbonate model surfaces, giving RC bodyshell projects a dedicated colour coat in a 100 ml aerosol format. The light blue shade brings a crisp, clean look to clear shells, whether the aim is a full single-colour body or a base for a more detailed racing livery. The formula is specified for polycarbonate, a key detail for shells that flex in use and need the right type of coating. The aerosol format helps distribute paint in smooth passes over broad roof sections, curved fenders and tighter body lines. On clear bodyshells, controlled coats make it easier to build colour gradually and keep the finish consistent across the shell. The compact can size also fits neatly into hobby bench setups where several colours may be used across one project. PS-3 Light Blue suits fresh body builds, replacement shells and repaint work on existing RC projects. It can be used when adding a clean race look, matching a colour theme across several vehicles or finishing a shell before decals and final detailing. This makes the spray a practical choice for modelers who want a dedicated polycarbonate colour in an easy-to-handle can. Warning! Not suitable for children under 14 years.
PS spray colours
PS-34 Bright Red, polycarbonate spray paint
300086034€10.991 l = €109.90
PS-34 Bright Red brings a bold colour finish to polycarbonate model bodies, with a spray format that suits broad side panels, curved roof sections and detailed body contours. The 100 ml can gives hobby paint work a compact format that stores easily on the bench while keeping a clearly identified shade under the red cap. The can is labelled for polycarbonate, which matters when a bodyshell calls for a paint type matched to that material rather than a general craft coating. Bright Red suits racing-inspired colour layouts, single-colour shells and touch-up work on existing model bodies where a vivid solid tone is needed. The aerosol format helps lay colour across larger sections without brush marks, while still reaching recessed lines and tighter corners around body shapes. Made in Japan, PS-34 sits within Tamiya's PS paint range for model finishing tasks tied to polycarbonate parts. On an RC workbench, the can fits naturally into body preparation and finishing sessions where colour choice, material match and clean coverage all matter. It also works well as a shelf-ready refill shade for hobby spaces that keep frequently used body colours close at hand. Warning! Not suitable for children under 14 years.
PS spray colours
PS-4 Blue Polycarbonate Spray Paint, 100 ml
300086004€10.991 l = €109.90
PS-4 Blue brings a bold colour finish to polycarbonate model work in a 100 ml spray can, with a formula made specifically for that material. On clear RC bodyshells and other polycarbonate parts, the aerosol format helps cover wide curves and recessed sections with a steady pass, so the colour reads cleanly across the shape once the shell is mounted. The can is part of the PS paint range for polycarbonate, making it suited to hobby builds that need a material-specific coating rather than a general craft spray. The dark blue cap gives a quick visual reference for the shade before painting starts. Aerosol delivery also suits larger shell sections where brush painting would leave visible transitions across long panels or roof areas. Used on the inside of a clear bodyshell, this type of paint supports the crisp, protected colour finish commonly chosen for RC car bodywork. The 100 ml content gives a practical amount for single-shell projects and touch-up work within the same colour family. On the workbench, PS-4 Blue fits naturally into body preparation, livery updates and repaint sessions for polycarbonate shells. It also works well when a fresh colour scheme needs to be matched across replacement bodyshells, spare panels or a second racing shell kept ready for the next run. Warning! Not suitable for children under 14 years.
PS spray colours
PS-18 Metallic Purple, polycarbonate spray paint
300086018€10.991 l = €109.90
PS-18 Metallic Purple brings a bold metallic finish to polycarbonate model bodies, with a spray format that suits broad, even coverage across curved panels and shell contours. The 100 ml can is sized for hobby bench use, giving a compact paint supply for body finishing work on RC and scale modelling projects. This paint is specified for polycarbonate, making it a targeted choice for clear bodyshell materials rather than a general craft coating. The metallic effect catches light differently across arches, rooflines and side sections, so body shapes read more clearly once the colour is laid down. The aerosol format helps distribute paint in a fine mist over larger sections, which is useful when a shell has sweeping surfaces or multiple connected panels. The PS-18 designation also makes colour matching and repeat purchases straightforward within an existing paint plan. On a fresh bodyshell, the can supports full-colour exterior styling for racing, touring or custom builds where a strong purple tone is part of the final look. It also fits repaint work on replacement shells or new body projects where a single, clearly identified metallic shade is needed for a coordinated finish. Warning! Not suitable for children under 14 years.
PS spray colours
PS-30 Brillant Blue, polycarbonate spray paint
300086030€10.991 l = €109.90
PS-30 Brillant Blue brings a vivid spray-applied colour to polycarbonate model parts, with a formula made specifically for this material and a 100 ml aerosol can that suits broad, curved surfaces. The can format helps cover shell sections evenly while keeping the application focused on formed body panels rather than small brushwork. This paint is intended for polycarbonate use in model building and finishing, where clear shells, wings and similar components need a dedicated coating method. The aerosol delivery supports repeated light coats, a practical approach for shaped surfaces with edges, arches and recesses that are awkward to cover by hand. Brillant Blue works as a single-colour finish or as part of a larger livery plan when a build calls for a strong blue base tone. The compact can size also fits neatly into hobby bench setups where several colour stages may be used across one shell. On RC body projects, the spray format suits fresh shell preparation, colour changes and replacement bodywork that needs fast, even coverage over larger areas. It also fits display-focused model finishing where polycarbonate parts need a clean, uniform blue tone that follows the moulded lines of the shell. Warning! Not suitable for children under 14 years.
PS spray colours
PS-41 Bright Silver, polycarbonate spray paint
300086041€10.991 l = €109.90
PS-41 Bright Silver is a polycarbonate spray paint for model finishing work, supplied in a 100 ml aerosol can. The metallic silver shade gives RC bodyshells and other compatible polycarbonate parts a bright, reflective look that suits race-inspired liveries, trim accents and full-body color layouts. The paint specification is focused on polycarbonate rather than general craft use, which matters when a shell flexes during handling and running. The aerosol format helps lay color across broad curves, roof sections and wheel arch contours with continuous passes instead of brush marks. Bright Silver works well for single-color bodies, layered custom schemes or selected panels that need a metallic contrast against darker tones. The compact can size also fits smaller workshop storage and targeted repaint jobs where only one shell or a few sections need coverage. On the bench, the can supports body preparation and finishing as part of an RC build or refurbishment session. It suits fresh color work on a new shell, visual updates on an existing bodyshell, or detail spraying on polycarbonate parts that need a uniform silver coat to complete the overall look. Warning! Not suitable for children under 14 years.
PS spray colours
PS-45 Translucent Purple, spray paint, 100 ml
300086045€10.491 l = €104.90
PS-45 Translucent Purple is a spray paint for polycarbonate model bodies that combines a see-through purple tone with the fast coverage of an aerosol can. The translucent effect leaves moulded lines, window areas and layered design work visible, giving custom shells a coloured finish that still shows the structure underneath. The 100 ml can is sized for hobby paint work and suits broad passes over larger panels as well as shorter bursts around tighter curves and edges. As a polycarbonate paint, it is intended for shells and similar parts in that material rather than general household surfaces. The translucent colour opens up finishing options that opaque shades cannot deliver, especially where lighting effects, smoked sections or multi-layer colour schemes are part of the design. Several light coats can be used to deepen the purple tone while keeping the finish visually clear. On an RC bodyshell, PS-45 can be used for tinted window sections, accent panels or full-body colour treatments that need depth rather than a solid block of colour. It also fits display-focused model projects where the shell shape, panel lines and graphic layout should remain visible through the final coat. Warning! Not suitable for children under 14 years.
PS spray colours
PS-59 Dark Metallic Blue, polycarbonate spray paint
300086059€11.991 l = €119.90
PS-59 Dark Metallic Blue is a spray paint for polycarbonate model bodies, created for finishing RC shells with a darker metallic tone and an even sprayed coat. The 100 ml can gives model builders a practical format for covering broad body sections while still keeping control over narrower areas such as roof lines, side panels and curved fenders. The polycarbonate-specific formula suits clear bodyshell work where a sprayed finish needs to follow the shell's contours cleanly. Dark Metallic Blue brings a cooler, deeper colour note than a flat blue, so panel shapes and body lines stay visible as the shell moves under changing light. The aerosol format also helps distribute colour across larger surfaces in a continuous pass, which is useful when working around arches, cabin sections and rear decks on RC car bodies. Used as part of a custom livery, PS-59 fits full single-colour paint jobs as well as darker accent sections on racing and off-road shells. On the bench, the 100 ml volume gives enough material for planned paint sessions without moving to bulk containers, and the spray can stores neatly with other finishing supplies between body projects. Warning! Not suitable for children under 14 years.
PS spray colours
PS-6 Yellow, spray paint, polycarbonate 100 ml
300086006€10.991 l = €109.90
PS-6 Yellow is a 100 ml spray paint developed for polycarbonate model surfaces. The aerosol format lays colour across broad curves and shaped sections with a continuous mist, which helps when covering RC bodyshell contours, roof sections and side panels in one consistent tone. The paint is specified for polycarbonate, so it matches the material used on many clear RC car bodies and other formed model parts. That material-specific use is the key detail in finishing work, because the paint choice needs to fit the surface rather than simply the colour plan. Yellow gives strong visual contrast for full body schemes, racing accents or layered custom graphics. The can format also suits masking work, where broad sprayed areas form the base before additional colours or details are added. Content is 100 ml. On the bench, PS-6 Yellow fits naturally into RC body painting sessions, whether the goal is a single-colour shell or a brighter section within a multi-colour livery. It also works for refreshing replacement bodyshells or starting a new custom look on polycarbonate parts used in model driving projects. Warning! Not suitable for children under 14 years.
PS spray colours
PS-61 Metallic Orange, spray paint, 100 ml
300086061€11.491 l = €114.90
PS-61 Metallic Orange brings a vivid metallic finish to model painting in a 100 ml spray format that suits broad, even coverage across shells and larger exterior sections. The ready-to-spray can supports fast application with continuous passes, so curved panels, edges and open surface areas can be coated with a more uniform visual effect than hand brushing alone. The metallic pigment gives the orange tone a reflective character that changes with the angle of light, adding extra presence to bodywork, trim sections and colour accents. Used as part of a model finishing setup, the spray format helps keep the coat visually consistent across connected surfaces where mismatched texture can distract from the final look. The 100 ml content offers a practical amount for painting sessions that involve full exterior coverage or repeated colour work on matching components. On the bench, PS-61 Metallic Orange suits custom paint schemes, refresh work and bold contrast sections on model projects. It can be used when a build calls for a brighter body colour, a metallic highlight or a strong visual break between adjacent painted areas. Warning! Not suitable for children under 14 years.
PS spray colours
PS-62 Pure Orange, polycarbonate spray paint
300086062€11.491 l = €114.90
PS-62 Pure Orange is a spray paint developed for decorating transparent polycarbonate bodies used in R/C car modeling. The colour is applied from the inside of the body shell, so the outer surface keeps its smooth finish while the orange tone shows through the clear material during running, display and body detailing. The 100 ml can is sized for finishing a model body and supports additional coats after curing when stronger colour density is required. For application, the spray can is held about 30 cm from the surface, which helps distribute paint across broad roof sections, side panels and tighter curves without pressing the nozzle too close to the shell. After curing, the paint is impervious to oil and fuels. That makes it suitable for gas-powered R/C bodies that are exposed to fuel residue during use. This paint is intended for polycarbonate bodies only and must not be used on plastic models. In a workshop setup, PS-62 Pure Orange suits fresh body finishing, colour changes and replacement shells prepared for track sessions. It also fits detailed livery work where a bright solid base colour is needed before further masking or follow-up coats are added. Warning! Not suitable for children under 14 years.
PS spray colours
PS-63 Bright Gun Metal, polycarbonate spray paint
300086063€12.491 l = €124.90
PS-63 Bright Gun Metal is a 100 ml spray paint developed for polycarbonate RC bodyshell work, bringing a metallic grey finish to clear shells used in racing and custom builds. The spray format helps cover broad curved sections quickly while still reaching tighter moulded details such as vents, recesses and body contours. Used on the inside of a clear polycarbonate shell, the colour shows through the material with a smooth, even appearance that suits modern touring cars, competition-inspired liveries and darker custom schemes. The Bright Gun Metal shade works well for full-body coverage or for selected sections such as roof panels, bonnet areas and trim details. A spray application also avoids the streaking that can appear with brush painting on large curved surfaces. The 100 ml can size gives a practical amount for shell painting tasks where consistent colour across multiple sections matters. On the bench, PS-63 fits naturally into body finishing sessions focused on masking, layered colour placement and clean separation between painted areas. In running or display setups, the metallic grey tone gives RC bodyshells a technical, motorsport-led look that reads clearly under indoor light and outdoor daylight. Warning! Not suitable for children under 14 years.
PS spray colours
PS-19 Camelyellow, polycarbonate spray paint
300086019€10.991 l = €109.90
PS-19 Camelyellow brings a bold yellow tone to polycarbonate model finishing in a spray format that covers broad body sections quickly and evenly. The aerosol can is made for hobby paint work on polycarbonate surfaces, where the correct paint type matters for clean application on curved shells and formed panels. The 100 ml net volume gives useful capacity for body painting, accent sections or colour-matched touch-up work without moving to a larger workshop container. As part of the PS paint range for polycarbonate, this spray suits RC bodyshell projects and other compatible model parts that need a dedicated coating rather than a general craft paint. The Camelyellow shade reads clearly on track-inspired colour schemes and works well for single-colour bodies, striping layouts or high-visibility sections. The can format also helps keep the paint flow consistent across larger areas such as roofs, sides and bonnet sections. On the bench, PS-19 fits naturally into the finishing stage of a model build, whether the goal is a full body colour or selected visual highlights. It also works as a practical refill choice when an existing shell needs the same Camelyellow tone again for repairs, updates or a fresh exterior coat. Warning! Not suitable for children under 14 years.
PS spray colours
PS-27 Fluorescent Yellow, polycarbonate spray paint
300086027€11.491 l = €114.90
PS-27 Fluorescent Yellow is a spray paint for polycarbonate model bodies, created for hobby finishing work where the coating needs to match the shell material. The 100 ml aerosol format makes it practical for covering larger curved sections as well as narrower edges and contour lines on clear bodyshells. The fluorescent yellow tone brings a bright, track-ready look to RC car shells and other polycarbonate model parts. Used on the inside of a clear body shell, this type of paint supports the crisp, protected colour presentation model builders look for on racing and custom designs. The aerosol can format allows the paint to be applied in light passes across wheel arches, roof sections and side panels. This makes it useful for full-body colour layouts, contrasting sections or repairs to an existing finish where the same PS colour is needed. On the workbench, PS-27 fits naturally into body painting sessions focused on shell preparation, masking and layered colour planning. It suits builders refining a fresh bodyshell for track use, updating an older RC shell, or adding a fluorescent accent to a new livery with a colour that remains easy to spot at a glance. Warning! Not suitable for children under 14 years.
PS spray colours
PS-28 Fluorescent Green, spray paint, 100 ml
300086028€11.491 l = €114.90
PS-28 Fluorescent Green brings a vivid spray finish to polycarbonate model parts, combining a bright colour tone with the quick, even application of an aerosol can. On clear RC bodyshells, the shade reads strongly through the shell and gives racing lines, roof sections and side panels a sharp visual presence. The formula is specified for polycarbonate, making it suitable for model surfaces that need a dedicated coating rather than general craft paint. The can contains 100 ml, a practical volume for covering individual sections or complete smaller shells while still allowing layered application where deeper colour density is needed. The aerosol format helps distribute paint across broad curves, recessed areas and moulded details with fewer brush marks or pooling effects than hand painting. Within a custom paint scheme, Fluorescent Green works as a full-body colour or as a contrasting accent on wings, roof panels and graphic sections. In workshop use, the spray fits naturally into body finishing for RC cars and other polycarbonate model parts, especially when a build calls for a strong, track-ready colour presence. It also suits refresh work on existing shells where a single bright tone can quickly change the overall look of the model. Warning! Not suitable for children under 14 years.
PS spray colours
PS-29 Fluorescent Pink, spray paint, 100 ml
300086029€11.491 l = €114.90
PS-29 Fluorescent Pink brings a bold colour accent to polycarbonate model work in a 100 ml spray can sized for hobby painting sessions. The aerosol format lays colour onto curved shell sections, roof panels and body lines in a way that suits RC bodyshell finishing and custom visual themes. The formula is specified for polycarbonate, which makes it relevant for clear racing shells and other compatible model parts rather than general craft surfaces. Fluorescent Pink gives liveries, contrast sections and standout details a bright visual presence, especially where a build calls for strong colour separation. The can format also helps keep application consistent across wider panels compared with brush painting on large shell areas. As an aerosol paint, PS-29 should be handled with the stated precautions appropriate to this type of material. This paint suits fresh bodyshell projects, colour changes on existing shells and detailed finishing work on hobby models that use polycarbonate components. In workshop use, the 100 ml volume fits neatly into paint planning for single-shell coverage, accent sections or matching follow-up coats within a custom RC build. Warning! Not suitable for children under 14 years.
PS spray colours
PS-54 Cobalt Green, spray paint, for polycarbonate
300086054€12.191 l = €121.90
PS-54 Cobalt Green is a spray paint for polycarbonate model bodies, bringing a vivid green tone to RC shell finishing in a format built for broad, even coverage. The 100 ml aerosol can suits painting sessions where smooth colour application across curved surfaces matters as much as the final shade. This PS series paint is intended for polycarbonate, the material commonly used for lightweight RC bodyshells that flex during running. The spray format helps reach roof sections, side panels and wheel arch curves more evenly than hand painting, which is especially useful when a shell carries multiple moulded lines and recessed details. Cobalt Green adds a strong, cool-toned colour option for single-colour bodies, racing stripes or masked graphic sections. The can shown in the range uses the PS designation and colour code PS-54, making it easy to match the shade within a larger paint plan. On the bench, the 100 ml volume fits typical body finishing work for RC car shells and supports controlled passes over larger panel areas. It works well in projects that combine one main body colour with taped-off sections, window masks or layered race-style graphics on polycarbonate bodies. Warning! Not suitable for children under 14 years.
PS spray colours
PS-7 Orange, polycarbonate spray paint, 100 ml
300086007€10.991 l = €109.90
PS-7 Orange brings a vivid orange finish to polycarbonate model parts, with an aerosol format that suits broad, even coverage across curved shells and shaped panels. The 100 ml can gives model builders a practical paint volume for coating bodyshell sections where brush application would struggle to stay uniform. This spray is specified for polycarbonate, making it a focused choice for RC car bodies and other clear formed parts made from the same material. The aerosol delivery helps place colour across rooflines, arches and tighter contours in a continuous pass, which supports a cleaner visual result on complex shapes. Orange works especially well for race-inspired liveries, high-contrast striping and custom body designs that need strong visibility. The can format also keeps the paint ready for workshop use without separate mixing equipment. On the bench, PS-7 Orange fits naturally into body finishing for RC projects, whether a single-colour shell is being coated or a multi-stage design is being built up panel by panel. It also suits refresh work on existing polycarbonate bodies where a clear, saturated colour is needed to change the look of a running model. Warning! Not suitable for children under 14 years.
PS spray colours
PS-11 Pink, polycarbonate spray paint, 100 ml
300086011€10.991 l = €109.90
PS-11 Pink is a spray paint for polycarbonate bodyshells, bringing a bold colour accent to RC vehicle builds in a 100 ml aerosol can. The formula is intended for clear polycarbonate surfaces used on many RC car shells, where an even sprayed coat can follow moulded lines and larger curved panels with a clean, uniform look. Used on the inside of a transparent bodyshell, polycarbonate paint lets the shell shape and surface detail stay visible through the colour layer. This makes PS-11 useful for race bodies with wheel arches, roof channels, bonnet contours or rear wing sections that need a consistent finish across changing shapes. The pink shade stands out clearly on track and in workshop builds, whether it is used as a full body colour or combined with masking for multi-colour layouts. The aerosol format also suits broad coverage on shell sections that would take longer to coat evenly by hand. PS-11 fits naturally into body finishing for RC cars, from a fresh shell waiting for its first colour to a replacement bodyshell prepared for a new look. In a hobby workspace, the can supports steady spray passes across side panels, roof areas and curved front sections where smooth colour application matters most. Warning! Not suitable for children under 14 years.
PS spray colours
PS-17 Metallic Green, spray paint, polycarbonate
300086017€10.991 l = €109.90
PS-17 Metallic Green is a spray paint for polycarbonate model surfaces, bringing a clear metallic colour option to RC bodyshell finishing and other compatible hobby applications. The aerosol can holds 100 ml, giving model builders a practical format for coating formed shells with a consistent layer while keeping the colour reference straightforward during paint selection. The formulation is specified for polycarbonate, which matters when the shell material determines the paint choice. Metallic Green adds a reflective effect that changes with light across curved rooflines, fenders and rear sections, so body contours stay visible after painting instead of flattening into a solid block of colour. In a workshop setup, the spray format helps cover larger shaped areas more efficiently than brush application, especially on shells with multiple bends, recesses and cut lines. Used on RC bodyshell projects, PS-17 fits into custom liveries, single-colour race looks or replacement paint work on worn shells. The can size works well for keeping a dedicated colour ready for touch-up sessions or for finishing a fresh body before decals and final assembly on the chassis. Warning! Not suitable for children under 14 years.
PS spray colours
PS-21 Park Green, polycarbonate spray paint
300086021€10.991 l = €109.90
PS-21 Park Green brings a solid green finish to polycarbonate model parts in a 100 ml aerosol can, making it suited to bodyshell painting where broad, even coverage matters. The spray format reaches curved sections and larger panels quickly, so clear shells can take on a uniform colour coat with fewer passes than brush application. This paint is specified for polycarbonate, a common material for RC car bodies and similar transparent model components that need a flexible colour layer on the inside surface. The Park Green shade works for single-colour schemes, racing liveries and restoration of worn shells where an existing finish needs renewal. As an aerosol, the can supports continuous passes across roofs, sides and arches, which helps maintain a consistent visual result over larger areas. The 100 ml content gives a practical amount for hobby bench use without shifting into oversized workshop packaging. On the workbench, PS-21 Park Green fits body finishing sessions for RC shells, replacement panels and other polycarbonate parts that need a dedicated spray colour. It also suits builders planning a fresh livery before decals and detail work are added in later finishing steps. Warning! Not suitable for children under 14 years.
PS spray colours
PS-46 Iridescent Green-Purple, Poly spray paint
300086046€14.691 l = €146.90
PS-46 Iridescent Green-Purple Poly spray paint brings a shifting finish to polycarbonate model surfaces, with a colour effect that moves between green and purple as light travels across the shape. The formula is intended for polycarbonate, making it suited to RC bodyshells, canopies and other formed clear parts where a spray-applied coat needs to follow curved contours evenly. The 100 ml aerosol format supports broad coverage on larger shells as well as controlled passes on smaller sections, and the spray application helps lay colour across recessed lines, arches and compound curves that are harder to reach with brush paint. Iridescent paint changes its appearance with angle and lighting, so the same shell can show different tones on the roof, sides and fenders during running or display. For a deeper result, the colour is recommended with PS-5 black behind the main coat, which strengthens contrast and gives the shifting finish more visual depth. This paint suits model work where the body shape itself becomes part of the effect, especially on polycarbonate racing shells, custom RC bodies and tinted detail sections. On the bench, it fits colour planning for multi-layer paint schemes; on a finished shell, it adds a changing surface tone that stands out as the model moves under indoor lighting or daylight. Warning! Not suitable for children under 14 years.
PS spray colours
PS-47 Iridescent Pink-Gold, Polycarbonate Spray
300086047€14.691 l = €146.90
PS-47 Iridescent Pink-Gold Polycarbonate Spray brings a shifting colour effect to clear model shells, combining a dedicated polycarbonate formula with an aerosol can that is easy to apply across broad body panels and tight curves. The pink-gold tone changes with the viewing angle, giving RC bodywork a finish that looks different along the roof, sides and fenders as the shell moves under light. The 100 ml can is sized for hobby paint work and is intended for polycarbonate surfaces rather than general household use. The product data recommends PS-5 black when painting with this colour, a backing step that deepens the effect behind the iridescent layer and changes how the final tone reads through the shell. This makes the paint especially useful on transparent bodies where the inside-applied colour and backing coat work together. The aerosol format helps carry colour into recessed contours and around cut lines without switching tools mid-session. In a model workshop, PS-47 suits custom liveries, accent sections or full-shell colour layouts where a changing metallic tone is part of the visual plan. It can be used when refreshing an existing polycarbonate body or when finishing a new shell before decals and final assembly, keeping the paint choice aligned with RC body materials and hobby finishing methods. Warning! Not suitable for children under 14 years.
PS spray colours
PS-60 Bright Mica Red, polycarbonate spray paint
300086060€11.491 l = €114.90
PS-60 Bright Mica Red brings a bold mica finish to polycarbonate body painting, combining a strong red tone with the convenience of a 100 ml spray can for clean, even application on RC shells. The format suits broad exterior coverage and helps reach curved sections, roof panels and arch contours with a continuous spray pattern. This paint belongs to the PS spray range for polycarbonate, making it a targeted choice for bodyshell work rather than a general craft coating. The mica effect gives the red colour extra visual depth, so panel shapes and flowing lines remain defined under changing light. On racing bodies, the finish supports clear colour separation in custom schemes and adds presence to single-colour layouts. The compact can size also fits neatly into hobby bench storage alongside masking materials and other finishing supplies. Used for fresh body projects, replacement shells or a repaint, PS-60 Bright Mica Red supports detailed finishing work across many RC car styles. It suits sessions focused on colour layout, layered exterior painting and final visual detailing before decals and track use. Warning! Not suitable for children under 14 years.
PS spray colours
PS-9 Green, polycarbonate spray paint, 100 ml
300086009€10.991 l = €109.90
PS-9 Green brings a solid green finish to polycarbonate model bodies in a 100 ml spray can, with a format that suits broad curves, roof sections and flowing shell lines. The aerosol application supports smooth coverage across lightweight bodyshell shapes used in RC modelling. This paint is specified for polycarbonate, so it fits the material used for many RC car shells rather than general workshop painting. The can is used from the inside of the body, a method that places the colour layer behind the clear shell and leaves the outer surface free to show the body contours. Light coats help build the finish gradually across tighter corners and larger side panels. The spray format also suits masking work where separate colour areas need clean transitions. As part of the PS paint range, PS-9 Green gives model builders a dedicated option for body finishing when a strong single-colour scheme or a base for multi-colour graphics is planned. On the bench, the can suits fresh bodyshell projects, replacement shells and repaint work on compatible polycarbonate parts. It also fits custom RC builds where a clear shell needs a defined racing colour before decals and final detailing are added. Warning! Not suitable for children under 14 years.
PS spray colours
PS-14 Copper, polycarbonate spray paint, 100 ml
300086014€10.991 l = €109.90
PS-14 Copper brings a metallic copper finish to polycarbonate RC bodyshells in a 100 ml spray can that is easy to handle during painting. The aerosol format helps lay colour across broad roof sections, curved fenders and tight edges with a consistent coat, giving clear shells a defined, race-ready look. This paint is specified for polycarbonate, making it suited to the flexible clear bodies used on many RC cars. The copper shade works well for full-body colour schemes, accent sections and custom livery concepts where a warm metallic tone changes the character of the shell under light. A 100 ml volume gives enough material for planned coating work while keeping the can compact in a workshop drawer or pit box. As part of the PS paint range, it fits naturally into model finishing tasks where the body shape, panel lines and window masks guide the final visual result. On the bench, PS-14 Copper supports careful paint sessions with light passes over prepared polycarbonate shells. During race-day prep, the metallic tone gives touring, buggy and truck bodyshells a distinct presence when the body catches changing light across corners and straights. Warning! Not suitable for children under 14 years.
PS spray colours
PS-22 British Racing Green, spray paint, 100 ml
300086022€10.991 l = €109.90
PS-22 British Racing Green brings a classic motorsport shade to polycarbonate body painting, with a spray format that suits the sweeping curves, rooflines and wheel openings common on RC bodyshells. The 100 ml can gives model builders a practical amount for shell finishing work while keeping colour choice clear through the PS-22 designation and matching green cap. This paint is specified for polycarbonate, making it suitable for clear formed shells used in many RC car builds rather than for general brush application on mixed hobby surfaces. The aerosol format helps lay colour across broad panels in smooth passes and reaches moulded recesses, window surrounds and tighter contours that are awkward to cover evenly with a brush. British Racing Green is a strong choice for period racing themes, understated single-colour bodies and darker contrast sections within multi-colour schemes. The can is marked as an air spray with 100 ml net volume and made in Japan. On the workbench, PS-22 fits naturally into shell preparation and livery planning, whether the goal is a full body colour or selected accent areas on a polycarbonate build. It also works well when several body colours are organised by code, letting the PS-22 marking serve as a quick reference during masking and painting sessions. Warning! Not suitable for children under 14 years.
PS spray colours
PS-32 Corsa Grey, polycarbonate spray paint
300086032€10.991 l = €109.90
PS-32 Corsa Grey is a spray paint for polycarbonate model parts, giving RC bodyshell projects a dedicated colour coat in a 100 ml can. The spray format suits broad curved panels and shell contours, where an even pass matters for a clean exterior finish and a consistent overall tone. The paint is specified for polycarbonate rather than general craft use, which makes it relevant for clear model bodies that flex during handling and running. Corsa Grey brings a restrained, technical shade that works well on touring cars, GT bodies and other shell styles where a solid neutral colour keeps lines and graphics clear. The aerosol format also helps reach roof sections, wheel arch curves and side panels with fewer visible brush marks than hand painting. For model work that continues with decals, trim details or window masking, a uniform base colour gives the shell a clear starting point. On the bench, the 100 ml volume suits single-shell paint jobs as well as touch-up work across matching body projects. In RC body finishing, this kind of dedicated spray paint fits the stage where a clear shell starts to take on its final character through colour, masking and livery choices. Warning! Not suitable for children under 14 years.
PS spray colours
PS-37 Translucent Red, polycarbonate spray paint
300086037€10.991 l = €109.90
PS-37 Translucent Red is a polycarbonate spray paint developed for model finishing, with a transparent red tone that keeps the character of the bodyshell visible beneath the colour layer. The aerosol can holds 100 ml, giving a practical format for coating larger curved sections as well as tighter contours around arches, pillars and roof edges. Because the colour is translucent, the final look depends on the layer beneath it as well as the spray coat itself. For colours PS-37 to PS-40, backing with PS-41 Light Silver is recommended, which helps bring out a brighter, more luminous result. This makes PS-37 useful for shells that rely on layered paintwork rather than a flat opaque finish. On polycarbonate RC bodies, the transparent red tone can preserve moulded lines and window masking transitions instead of covering them with a solid block of colour. In workshop use, the spray format supports steady passes across broad panels and controlled coverage on shaped sections where a brush would leave a different finish. It suits body painting sessions focused on colour depth, masked graphics and custom race-inspired liveries on polycarbonate shells and similar model parts. Warning! Not suitable for children under 14 years.
PS spray colours
PS-39 Translucent Lightblue, spray paint, 100 ml
300086039€10.991 l = €109.90
PS-39 Translucent Lightblue is a polycarbonate spray paint developed for model finishing where a clear shell needs colour without losing its see-through character. The translucent light blue tone lets the shape of a bodyshell, canopy or other clear part remain visible, creating a tinted finish that still shows the lines and contours underneath. The 100 ml aerosol can is sized for hobby paint work on formed polycarbonate parts, where broad curves, recessed sections and raised details benefit from spray application rather than brush marks. This paint belongs to the PS range for polycarbonate, making it suited to clear RC bodyshells and similar model components that call for a dedicated shell paint. The stated colour note for PS-37 to PS-40 recommends backing with PS-41 light silver. That extra backing layer affects how the translucent shade reads through the shell and helps the final tone develop with the intended visual depth. On the bench, PS-39 fits custom body projects, replacement shell finishing and detail-led race livery work where a transparent blue effect is part of the look. It also suits canopies, window areas or accent sections that need a lighter tinted appearance instead of a solid opaque coat. Warning! Not suitable for children under 14 years.
PS spray colours
PS-40 Translucent Pink, spray paint, 100 ml
300086040€10.991 l = €109.90
PS-40 Translucent Pink brings a vivid tinted finish to polycarbonate model bodies, with a translucent effect that keeps light passing through the colour layer instead of covering the surface opaquely. On clear RC bodyshells, that creates a brighter, layered look that suits custom race graphics, accent sections and bold full-body colour schemes. The formula is specified for polycarbonate, making it suitable for the flexible shells used on many RC cars and other hobby models. The 100 ml aerosol can is sized for practical workshop use, with spray application that reaches broad roof panels, curved fenders and narrow side sections more quickly than brush painting. Because PS-40 belongs to the PS-37 to PS-40 colour group, Tamiya recommends backing it with PS-41 Light Silver. That extra backing coat helps the final shade read as intended and gives the translucent pink more presence once the shell is mounted. In a paint session, PS-40 fits naturally into multi-step body finishing, whether the goal is a single-colour shell, layered striping or window-mask designs on clear polycarbonate. It also works well when a build calls for colour depth rather than a flat solid coat, adding a distinctive tinted character to RC bodywork and other compatible model surfaces. Warning! Not suitable for children under 14 years.
PS spray colours
PS-42 Translucent Yellow, polycarbonate spray
300086042€10.491 l = €104.90
PS-42 Translucent Yellow is a spray paint for polycarbonate model surfaces, supplied in a 100 ml aerosol can for broad, even colour application. The translucent yellow tone tints the surface instead of covering it with a solid coat, so clear sections, layered effects and light-catching details stay visually present while gaining a vivid yellow cast. The formula is specified for polycarbonate, making it suited to model bodyshell work where that material needs the right paint type. The aerosol format helps distribute colour across larger curved panels as well as narrower sections that are harder to cover evenly with a brush. Because the finish is translucent, the underlying shell still plays a visible role in the final look, which opens up more scope for custom effects than an opaque colour would. The can is marked PS-42, making it easy to match the shade within an existing paint plan or a repeat build. On RC bodyshell projects, the colour can be used for full-body tinting, highlighted sections or layered visual accents on clear polycarbonate parts. It also fits hobby bench setups where a spray can is the preferred route for fast, even coverage across shaped model surfaces. Warning! Not suitable for children under 14 years.
PS spray colours
PS-43 Translucent Orange, polycarbonate spray
300086043€10.491 l = €104.90
PS-43 Translucent Orange brings a vivid tinted finish to polycarbonate model body painting, with a spray format that suits broad curves, roof sections and shaped panel areas on RC bodyshells. The translucent colour effect leaves room for light to pass through clear sections, which opens up more visual options than an opaque coat when a shell needs window tinting or layered accents. As part of the PS paint range, this aerosol is intended specifically for polycarbonate surfaces rather than general craft use. The 100 ml can gives a practical volume for shell finishing sessions, whether the goal is a full colour treatment or selected highlights on a custom livery. The cap and label identify the shade clearly as Translucent Orange, which helps when planning multi-step masking work or matching a paint stock across several builds. The can format also suits smooth passes along longer body lines where brush marks are not wanted. In a workshop setup, PS-43 fits naturally into RC body preparation alongside masking, backing colours and final detailing. It works well when a clear bodyshell needs a stained, light-passing effect on selected sections, or when a racing shell calls for a brighter custom tone that still shows depth through the material. Warning! Not suitable for children under 14 years.
PS spray colours
PS-48 Alu Silver, polycarbonate spray paint
300086048€18.491 l = €184.90
PS-48 Alu Silver brings a bright metallic silver tone to polycarbonate body shell projects, giving RC car bodies a crisp finish that picks up molded vents, grille shapes, widened fenders and other formed details across the shell. The aerosol format applies the paint as a fine spray, which helps cover broad curved sections and recessed styling lines with a consistent coat during model finishing work. This paint is specified for polycarbonate, making it suited to clear body shells used in RC model building rather than general craft surfaces. The can contains 100 ml, a practical volume for complete shell painting or focused refinishing on a single body project. The Alu Silver shade is recommended with PS-5 black when painting with these colours, adding a darker backing layer behind the silver finish. That combination can strengthen contrast and give body contours, intake shapes and panel transitions a more defined look once the shell is mounted. On the bench, PS-48 fits naturally into body preparation and finishing sessions for touring cars, race cars and other polycarbonate RC shells. It works well when the goal is a metallic body colour that keeps the shell's sculpted lines visible, whether covering a full exterior design or building up a motorsport-inspired paint scheme. Warning! Not suitable for children under 14 years.
PS spray colours
PS-49 Alu-Effekt Blue, polycarbonate spray paint
300086049€18.491 l = €184.90
PS-49 Alu-Effekt Blue is a spray paint for polycarbonate model parts, supplied in a 100 ml aerosol can for smooth, controlled colour application. The metallic blue tone is suited to clear body shells where the paint is applied from the inside, leaving the outer surface glossy and the moulded shape clearly visible. The formula is specified for polycarbonate rather than general craft use, making it relevant for RC bodywork and other formed hobby shells that need a coating matched to that material. Hood lines, air intakes, wheel arch contours and other recessed or raised details remain visually defined when the colour is laid down in light, even passes. The data also recommends PS-5 black when painting with this colour, a backing coat that can deepen the final appearance and strengthen the visual effect of the metallic finish. In the workshop, the aerosol format keeps application direct and consistent across broad roof sections, curved fenders and narrow front ends without needing a brush setup. It fits repainting a fresh shell, refreshing a used bodyshell or matching separate polycarbonate parts within the same build. This paint is intended for model use, and the can carries hazard pictograms for flammable and health-related warnings, so handling should follow the precautions on the label. Warning! Not suitable for children under 14 years.
PS spray colours
PS-52 Champagne Gold, polycarbonate spray paint
300086052€18.491 l = €184.90
PS-52 Champagne Gold brings a metallic champagne tone to polycarbonate model bodies in a spray format built for hobby finishing. The aerosol can lays colour across broad shell sections quickly, which helps keep coverage consistent on curved body lines and larger clear moulded panels. This paint is specified for polycarbonate use and comes in a 100 ml can, making it a practical choice for single bodyshell work, partial repainting or detail correction on compatible shells. The cap shows the approximate shade for quick identification on the workbench. The source data also recommends pairing this colour with PS-5 black when a darker backing layer is wanted behind the finish. That guidance is especially useful when planning the order of coats on transparent RC bodies, where backing colour can affect the final visual result. On RC car bodyshells, polycarbonate paint is typically used where flexibility and shell-specific adhesion matter more than a general craft coating. PS-52 Champagne Gold fits neatly into that workflow for repainting a race shell, refreshing a used body or preparing a fresh clear bodyshell for track use and display. The can is intended for model finishing and should be used only on compatible polycarbonate surfaces. Warning! Not suitable for children under 14 years.
PS spray colours
PS-53 Lame Flake Transparent, spray paint, 100 ml
300086053€18.491 l = €184.90
PS-53 Lame Flake Transparent is a polycarbonate spray paint with a translucent flake finish that gives model bodyshells a layered, light-catching look. The aerosol can contains 100 ml, making it suited to coating larger formed sections where an even sprayed layer matters more than brush application. The paint is intended for polycarbonate surfaces, so it fits the finishing needs of RC car bodies and other clear formed parts used in model building. Its transparent character lets the underlying shell and backing colour influence the final appearance rather than covering the surface with a flat opaque coat. The flake effect adds visible texture in changing light, which can make curved roofs, arches and side panels read differently as the model moves or is viewed from different angles. The product data recommends PS-5 black when painting with this colour, a combination that can deepen the final tone and strengthen contrast behind the transparent layer. In a workshop setup, the 100 ml spray can suits full-shell colour work, accent sections or repainting a used bodyshell. On track-focused RC builds, the finish can give race bodies a more vivid look while still following the needs of polycarbonate painting rather than general craft use. Warning! Not suitable for children under 14 years.
PS spray colours
PS-58 Pearl Clear, polycarbonate spray paint
300086058€14.491 l = €144.90
PS-58 Pearl Clear brings a transparent pearl effect to polycarbonate bodyshell painting, adding a light-catching finish while letting the chosen base shade remain visible. Applied over a PS-XX colour, the coating changes with the underlying tone, so the same spray can create different results across racing, touring or custom shell designs. The 100 ml can gives a practical format for body painting sessions and suits broad exterior areas as well as tighter contours around arches, rooflines and rear sections. Because the effect layer is clear rather than opaque, colour planning stays central to the final look: darker base coats can produce a deeper shimmer, while brighter tones can push the pearl effect forward more strongly. The stated pairing matters here, as PS-58 Pearl Clear is designed to work with PS-XX paints as the background. PS-55 Clear coat matt is excluded as a base for this effect. This spray fits the finishing stage of RC bodyshell projects where colour choice and surface effect shape the final character of the model. It can be used to refine a fresh shell build, update an existing polycarbonate body, or add another visual layer to a competition or display-oriented paint scheme. Warning! Not suitable for children under 14 years.
PS spray colours
PS-13 Gold, polycarbonate spray paint, 100 ml
300086013€10.991 l = €109.90
PS-13 Gold is a spray paint for polycarbonate bodies that brings a metallic gold finish to RC shells and other clear polycarbonate model parts. The aerosol can holds 100 ml, giving enough paint for full-body coverage or for selected sections such as roof panels, side areas and accent zones where a strong colour contrast is needed. The formula is specified for polycarbonate, which matters when painting flexible bodyshells used on RC vehicles. Applied to the inside of a clear shell, the colour shows through the body material while the outer surface keeps its smooth contour lines. This makes PS-13 useful for single-colour race bodies, custom striping layouts and layered paint schemes that rely on a bright metallic tone. The gold shade also works well for highlight sections, number-panel surrounds and visual separation between body graphics. In the workshop, the 100 ml can suits broad passes over larger panels as well as shorter bursts around arches, pillars and tighter curves. PS-13 fits naturally into body finishing sessions for touring cars, buggies, trucks and other polycarbonate RC shells where colour choice shapes the final look as much as the body design itself. Warning! Not suitable for children under 14 years.
PS spray colours
PS-25 Light Green, polycarbonate spray paint
300086025€10.991 l = €109.90
PS-25 Light Green is a spray paint developed for polycarbonate model bodies, giving RC shell projects a bright, solid colour with the convenience of aerosol application. The 100 ml can suits builders working on clear bodyshells that need smooth coverage across curved panels, roof sections and arch lines. This paint is intended for polycarbonate surfaces rather than general craft use, which makes it relevant for many RC car body jobs where the colour is applied to the inside of the shell. That placement leaves the outer surface clear while the painted layer sits behind it, a common approach for preserving the finish during regular handling. Light Green works well as a full-body colour, as a masked section in a multi-tone livery, or as a contrasting panel within a race-inspired scheme. The spray format also helps reach broad sections more quickly than brush application on larger shell areas. On the bench, PS-25 fits naturally into body finishing steps such as masking windows, defining stripes and building up colour in successive coats. It also suits refresh work on replacement bodyshells when a familiar colour layout needs to be recreated with the same shade family. Warning! Not suitable for children under 14 years.
PS spray colours
PS-33 Cherry Red, polycarbonate spray paint
300086033€10.991 l = €109.90
PS-33 Cherry Red brings a strong solid finish to polycarbonate model bodies, with a spray format that suits broad curved surfaces and recessed body lines alike. The 100 ml aerosol can gives model builders a practical way to apply colour across RC shells while keeping the handling focused on steady, even passes. The formula is specified for polycarbonate, making it relevant for many clear bodyshells used in RC car building and refurbishment. Cherry Red works for full-body colour layouts, replacement finishes on worn shells, or fresh custom schemes built around masking and layered paintwork. The aerosol format helps cover roof sections, side panels and arch contours more quickly than brush application on larger shell areas. In a paint lineup, this shade also serves as a direct colour reference when matching existing red graphics or extending a livery across replacement body parts. On the workbench, the can fits naturally into body preparation and finishing sessions where a shell moves from clear surface to race-ready colour. It also suits restoration work on used polycarbonate bodies, where a single 100 ml can offers a straightforward format for renewing the visual character of an RC build. Warning! Not suitable for children under 14 years.
PS spray colours
PS-35 Blue-Violet, polycarbonate spray paint
300086035€10.991 l = €109.90
PS-35 Blue-Violet is a spray paint for polycarbonate model parts, supplied in a 100 ml can for hobby finishing work. The Blue-Violet shade gives clear bodyshells a bold colour layer that suits racing liveries, custom builds and fresh repaint projects on RC models. The formula is specified for polycarbonate, making it suitable for the material commonly used in lightweight RC bodyshells and similar formed parts. Aerosol application helps spread colour across broad roof panels, curved fenders and narrow edges with a continuous spray pattern rather than brush strokes. This supports cleaner coverage on shells with moulded contours, window lines and cut-out sections. The can format also fits bench setups where a single colour needs to be applied quickly and evenly across the inside of a clear body. In use, PS-35 suits body painting sessions that move from masking and colour blocking to final visual detailing on track cars, drift shells or display-focused RC builds. It also works well when refreshing worn finishes on existing polycarbonate bodies or adding a distinct Blue-Violet tone to a new custom scheme. Warning! Not suitable for children under 14 years.
PS spray colours
PS-36 Translucent Silver, polycarbonate spray
300086036€10.991 l = €109.90
PS-36 Translucent Silver is a 100 ml spray paint for polycarbonate model bodies, created for hobby paint work where a clear shell needs a metallic tone that still lets light and the underlying surface affect the final appearance. The translucent character gives painted bodyshells a different result from an opaque coat, making it useful for layered colour planning on RC body projects. Used on clear polycarbonate, this spray supports custom finishes with a silver effect that can shift in depth depending on the backing colour and the number of coats applied. The aerosol format helps distribute paint across broad roof sections, curved fenders and tighter body contours with an even mist. In a model supplies setup, PS-36 belongs to the paint stage of body preparation rather than chassis assembly, with the colour choice shaping the final look of racing, touring or off-road shells. On the bench, the 100 ml can fits focused paint sessions for single bodyshell projects or detail-led colour schemes. In RC body customising, Translucent Silver works where a finish needs metallic character while keeping the visual effect of a clear polycarbonate shell in play. Warning! Not suitable for children under 14 years.
PS spray colours
PS-38 Translucent Blue, polycarbonate spray paint
300086038€10.991 l = €109.90
PS-38 Translucent Blue is a polycarbonate spray paint created for model body finishing where colour needs to stay transparent rather than cover solidly. The translucent blue tone lets the shell lines, moulded contours and cut body shape remain visible, which suits RC bodyshell work that relies on layered colour and light passing through the painted surface. The can contains 100 ml and is intended for spray application on polycarbonate parts. Within the PS paint range, this shade sits alongside PS-37 to PS-40, and Tamiya specifically recommends backing these colours with PS-41 Light Silver. That backing step changes how the translucent layer reads on the shell, giving the finished colour more presence while keeping the transparent character of the paint. This makes PS-38 useful for full body coverage, tinted sections or accent areas where a clear colour effect is part of the final look. On the bench, PS-38 fits naturally into custom RC body painting, whether the aim is a single-colour shell or a layered scheme with masked sections and backing coats. It also works well when a bodyshell needs a blue transparent tone that still shows the form of the polycarbonate underneath, especially on curved panels, roof sections and flowing side lines. Warning! Not suitable for children under 14 years.
PS spray colours
PS-44 Translucent Green, spray paint, 100 ml
300086044€10.491 l = €104.90
PS-44 Translucent Green is a 100 ml spray paint developed for polycarbonate model bodies and shaped for finishes where the colour layer stays light-permeable. The translucent effect gives clear shells, window areas or selected body sections a green tint that changes the look of the surface while still allowing light to pass through. The spray format helps distribute paint across curved panels and recessed shapes that are common on RC bodyshells. On clear polycarbonate, this type of finish can be used for tinted windows, layered colour work or accent zones that need a see-through appearance rather than a solid block of colour. The 100 ml can size keeps the paint easy to handle during short, controlled passes and suits focused work on individual body sections as well as broader colour coverage. The shade designation PS-44 keeps colour selection clear when matching an existing scheme or planning a new shell finish. In workshop use, the can fits projects that call for a transparent green effect on racing bodies, custom shells or replacement bodyshell parts. It also works well when a paint layout combines clear and coloured sections, so the finished model keeps visible depth in the body design instead of a fully opaque surface. Warning! Not suitable for children under 14 years.
PS spray colours
PS-50 Alu-Effect Red, polycarbonate spray paint
300086050€18.491 l = €184.90
PS-50 Alu-Effect Red is a 100 ml spray paint developed for polycarbonate model bodies, bringing a metallic red finish with an aluminium effect to clear RC shells. The aerosol format makes it easy to cover broad curves, rooflines and front sections evenly, so a bodyshell can take on a vivid, reflective look that stands out on the track or on the shelf. This paint is specified for polycarbonate use rather than general hobby surfaces, which matters when working with flexible RC body material. The colour code PS-50 helps match the can to a planned livery or replacement coat during a build. The source data also recommends PS-5 black when painting with this colour, giving modelers a clear backing-coat reference for the intended final appearance. The 100 ml volume suits full shell coverage as well as touch-up work on replacement bodies, depending on bodyshell size and layout. In use, PS-50 Alu-Effect Red fits naturally into RC body finishing sessions, whether the goal is a single-colour race shell or a more detailed custom design. It works well for painting from the inside of clear polycarbonate bodies, where the colour shows through the shell and the outer surface keeps its smooth gloss. Warning! Not suitable for children under 14 years.
PS spray colours
PS-51 Purple Anodized Effect, spray paint, 100 ml
300086051€18.491 l = €184.90
PS-51 Purple Anodized Effect brings a metallic spray finish to polycarbonate model parts with a colour developed specifically for that material. The 100 ml aerosol format supports controlled coverage on clear bodyshell sections, where the final tone builds through the painted layer and the backing colour behind it. This shade is intended for polycarbonate use rather than general craft painting, which matters on RC shells and similar formed parts that flex in use. The anodized-style purple effect gives body panels a more technical, machined look than a flat solid colour. Because the paint is applied to clear polycarbonate, the backing coat influences the visible result. For PS-51, Tamiya recommends PS-5 black, which deepens the finish and helps the colour read with more visual depth through the shell. The can suits hobby bench work focused on body customisation, repainting selected sections or finishing a fresh shell before decals and final assembly. On race-inspired bodies, the colour works well for full-body coverage, accent areas or layered paint schemes where a darker backing is part of the planned result. Warning! Not suitable for children under 14 years.
PS spray colours
PS-56 Mustard Yellow, polycarbonate spray paint
300086056€12.191 l = €121.90
PS-56 Mustard Yellow is a spray paint for polycarbonate model bodies, bringing a solid colour finish to RC shell projects with a shade that stands out clearly on track-focused designs and custom bodywork. The 100 ml aerosol can gives the paint in a ready-to-spray format suited to broad exterior coverage on formed shells. The paint is specified for polycarbonate, making it the matching choice for this body material when finishing hobby shells that flex in use. Mustard Yellow works as a full-body colour, a contrasting section in a multi-tone livery, or a visual accent on selected panels. The PS-56 shade code gives a clear reference for repeat work, touch-up planning, or matching the same colour across more than one shell. The cap label and can marking keep the colour easy to identify in a workshop drawer or paint rack. In RC body preparation, this spray can fits the stage where a clear shell moves into a finished racing look. It suits fresh body projects, replacement shells, and repaint work where a defined yellow tone is needed for stripes, roof sections, side panels, or complete coverage on polycarbonate bodies. Warning! Not suitable for children under 14 years.
PS spray colours
PS-57 Pearl White, polycarbonate spray paint
300086057€14.491 l = €144.90
PS-57 Pearl White is a spray paint for polycarbonate model bodies, bringing a bright pearl finish to RC shells with a format that suits broad exterior panels and shaped contours. The 100 ml can gives model builders a practical amount for colour application on compatible bodyshell surfaces, whether the goal is a full single-colour scheme or a light-catching base for a more detailed livery. The polycarbonate specification matters because RC bodyshells flex differently from rigid display parts, and this paint is designated for that material in the product data. Pearl White adds a distinct visual effect beyond a flat solid tone, giving curved roof sections, fenders and side areas a cleaner highlight under workshop light or outdoor running conditions. The spray format also helps cover larger shell areas more evenly than brush application, which is useful when keeping colour continuity across multiple body lines. On the bench, PS-57 suits fresh body projects, replacement shells and repaint work on compatible RC car bodies. It also fits builders planning race-inspired colour layouts, where a bright white pearl layer can define the main body colour before decals and trim details are added. Warning! Not suitable for children under 14 years.