Other spare parts & accessories
Are you looking for special spare parts? Then browse through our extensive selection of Tamiya spare parts & accessories and find exactly what you need!
Other spare parts & accessories
Are you looking for special spare parts? Then browse through our extensive selection of Tamiya spare parts & accessories and find exactly what you need!
More
Other spare parts & accessories
10mm Shim Set, RC accessory, 0.1-0.3 mm spacers
300053588€13.49
This 10 mm shim set brings fine mechanical adjustment to RC chassis work, with 30 spacers sized at 10 mm inner diameter and 13 mm outer diameter for controlled spacing at shaft mounting points. The 3 thickness options of 0.1 mm, 0.2 mm and 0.3 mm make it possible to correct small gaps that can lead to unwanted movement in suspension or wheel axle assemblies. Instead of relying on a single washer size, the set gives stepped tuning options that suit different setup needs across on-road and off-road vehicles. Each shim can be placed to shift the position of a mounted part in small increments, including forward adjustment where the chassis layout calls for tighter spacing. That makes the set useful during maintenance, rebuilds and race-focused setup changes where alignment and reduced slippage matter. Scope of delivery: 1 spacer set with 30 pieces. On the bench, the assortment supports careful fitting of moving parts before a run. During a rebuild or handling-focused setup session, the different shim thicknesses help dial in cleaner spacing at the exact point where play needs to be reduced. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
1150 Ball Bearing Set, RC bearing pack, sealed
300053008€36.29
The 1150 Ball Bearing set brings a direct drivetrain upgrade to compatible RC chassis by replacing plain rotating points with sealed ball bearings. Each bearing uses rubber-covered sides and an 11 mm outer diameter, 5 mm inner diameter and 4 mm width, creating a compact format for hubs, axles and other moving assemblies where clean rotation matters. Installing ball bearings is a common first step when tuning running performance because they reduce drive loss and support smoother movement through the transmission. The sealed construction adds high dust resistance, which helps the bearings keep turning freely in regular road, buggy and track use. The pack includes 4 bearings for targeted replacement or routine maintenance on frequently used assemblies. Compatibility covers a broad list of chassis, including TD4, TD2, DF-02, DF-03, DT-02, DT-03, DT-03T, TT-02, TT-02B, TT-02D, TT-02RR, TT-02 TYPE-S, TT-02 TYPE-SR, TT-02FT, TT-01D TYPE-E, TT-01 TYPE-E, M-05, M-05 PRO, M-06, M-06 PRO, M-07 CONCEPT, M-08 CONCEPT, MF-01X, RM-01, TB-04, TB-04 PRO, TRF101, TRF102, TRF103, F103GT and F104 Ver.II PRO. On a workshop bench, the 4-piece set suits regular servicing before the next run or a focused upgrade on a fresh chassis build. Once fitted, the bearings support freer rotation in the moving parts that shape how efficiently the model puts power down. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
2mm C-Ring-Set, model accessory, 8-piece
300084171€2.19
This 2 mm C-Ring-Set supplies 8 matching retaining clips for model maintenance, repair work and parts replacement. The compact format suits assemblies that use small fastening points, where a C-shaped ring locks into a groove on a shaft or similar mounting point to hold parts in position. The set groups identical metal clips together, which helps when a rebuild calls for consistent replacement parts rather than mixed hardware. The open centre cutout allows each ring to snap into place on the intended fitting, making this type of fastener useful wherever a low-profile retainer is needed in a mechanical model assembly. The silver-coloured finish also makes the pieces easy to identify in a parts tray or workshop setup alongside screws, washers and other small hardware. Used as spare parts, these C-rings support routine servicing, careful restoration work and the replacement of missing retainers in existing builds. Kept in a hobby drawer, the 8-piece pack provides a practical stock of matching clips for future workshop tasks on compatible model mechanisms. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
2mm E-Ring Satz, model accessory, 15 pieces
300050588€3.09
This E-Ring Satz provides 15 matching retaining clips in a 2 mm size for model maintenance, repairs and mechanical assembly work. Each E-ring is made as a small stamped metal fastener that presses onto a grooved shaft or axle from the side, where it acts as a stop to hold mounted parts in place. The flat clip profile keeps the fastening point compact, which is useful in tight spaces around driveline and wheel assemblies. The pack suits jobs where worn or missing retaining hardware needs a direct replacement in the correct size. A 2 mm E-ring can be used wherever the assembly calls for this specification, including axle or shaft setups that carry gears, bushings or wheels. The 2 mm thickness stated in the data adds a clear reference point when matching spare hardware to an existing build. With 15 identical pieces in one set, the supply supports repeated service work and keeps consistent hardware ready for future rebuilds. On the workbench, these clips fit naturally into parts sorting trays, spare hardware boxes and routine maintenance kits for RC and scale model projects. They are especially useful when a rebuild calls for several matching retainers across multiple connection points or when a small clip needs quick replacement after disassembly. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3mm 5.5x5.0mm Spacer, model accessory, 10-pack
319804641€8.19
This spacer set is built around exact measurements that matter during model maintenance and parts replacement. Each piece is specified at 3 mm with 5.5 x 5.0 mm dimensions, giving a clear reference for assemblies that rely on this format to maintain the intended spacing between compatible components. The set contains 10 matching spacers, which supports repeated service work without mixing different sizes in the same build. The defined dimensions make this set useful when an existing assembly already calls for 3 mm spacers and when consistent fit across several mounting points is needed. Rather than relying on approximate sizing, the stated 5.5 x 5.0 mm format gives a direct basis for checking compatibility against the parts already in use. On the workbench, these spacers suit routine maintenance, measured replacement and keeping spare hardware ready for future adjustments. The 10-piece count also helps when several identical positions in one assembly need the same spacer size, or when matching replacements are kept in reserve for later servicing. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3mm O-Ring black, model accessory, 10-piece
300084195€1.99
This 10-piece pack of black 3 mm O-rings adds a practical spare-parts supply for model maintenance, repair work and small mechanical assemblies. Each ring shares the same compact diameter and circular form, making the set useful wherever a matching seal or replacement ring is needed to restore fit between moving or joined parts. The pack contains 10 identical rubber O-rings, which helps keep replacements consistent across repeated service jobs instead of mixing unmatched sizes. Their black finish makes them easy to distinguish from other small workshop parts during sorting and storage. In model building and accessory upkeep, small sealing components often matter as much as larger visible parts, especially when a worn ring needs a direct like-for-like swap rather than an improvised substitute. Kept in a parts drawer, tool case or bench organiser, these O-rings are ready for routine maintenance sessions and quick repairs. The uniform 3 mm format also suits builders who prefer to keep duplicate consumable parts available before starting detailed assembly or servicing work. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3mm Shim-Set, RC spacer set, 0.1/0.2/0.3mm
300053585€11.29
The 3mm Shim-Set brings precise spacing control to RC car maintenance with 30 thin washers sized for 3 mm shafts. Each shim has a 3 mm inner diameter and a 5 mm outer diameter, making the set a practical choice for fine adjustment at suspension and other attachment points where excess movement can affect fit. Inside the set are 10 shims each in 0.1 mm, 0.2 mm and 0.3 mm thicknesses. That spread allows small, deliberate changes instead of forcing a single spacing value onto every location. On 3 mm suspension shafts, the shims can be placed to take up unwanted slack and refine how connected parts sit against one another. The ring format keeps the adjustment focused on the shaft position itself, which is useful when tuning linkage or suspension areas that react to very small dimensional changes. For workshop use, the set suits routine maintenance, chassis rebuilding and targeted setup corrections on many Tamiya RC cars. A builder can test one thickness, stack combinations where needed, and match the spacing to the exact attachment point rather than replacing larger components. The scope of delivery contains 1 spacer set with 30 pieces. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3x0.7mm Aluminum Spacer Set, model accessory
309805645€6.29
These aluminum spacers in 3x0.7 mm format support accurate spacing in detailed model assembly, where a defined gap can influence fit, alignment and component position. The 10-piece pack gives a ready supply for workshop drawers, replacement needs or builds that use several matching spacers in one setup. The 3 mm size and 0.7 mm thickness make this set suited to fine adjustment work rather than broad structural filling. In model construction, spacers like these sit between mounted parts to create consistent separation and help maintain the intended position of screws, brackets or other fitted elements. Aluminum brings a clean, technical finish to this small but useful hardware format and fits naturally into precision-focused hobby work. Whether used during a fresh build, a repair or a measured setup change, the defined dimensions make selection straightforward when a specific spacing value is needed. Kept in a parts box or bench organizer, the set adds a practical option for builders who work through detailed fitting tasks one measured step at a time. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
3x10mm Alum. Turnbuckle Shaft, chassis accessory
300053892€11.99
These 3 x 10 mm aluminium turnbuckle shafts bring precise anti-roll bar adjustment to compatible chassis setups while adding a clear blue finish to the hardware. The set contains 4 shafts and is intended as a chassis accessory for fine tuning left and right anti-roll bar settings without removing the adjuster. The compact 3 x 10 mm dimensions suit dedicated on-road racing platforms where small setup changes matter. As a replacement for 9804250, this set gives a direct route to refreshing existing hardware with the same stated function. Compatibility is listed for TRF415MSX, TRF415MS, TB Evo. IV MS and TB Evo. IV. TA05 fitment is also specified, with the condition that adjusters must be shortened. At the workbench, these shafts support quick setup changes between runs when anti-roll bar balance needs a finer response. In regular maintenance, the 4-piece pack also helps keep a matching set ready for rebuilds, repairs or chassis-specific spares within a race box. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
4mm Shim Set, RC accessory, 0.1/0.2/0.3 mm
300053586€11.29
This 4 mm shim set brings fine mechanical adjustment to RC maintenance and model workshop tasks where shaft spacing needs a precise correction. The pack contains 30 shims in total, divided into 10 pieces each at 0.1 mm, 0.2 mm and 0.3 mm, so clearance can be tuned in small measured steps instead of forcing a single thickness into every job. Each shim fits 4 mm shafts and is intended for situations where more clearance is required. The thin ring format slips onto the shaft to change spacing directly at the point of assembly, which helps when rotating parts need a more exact position. Combining different thicknesses from the set also allows intermediate spacing values, giving more control during drivetrain setup, axle work or other moving assemblies that rely on accurate alignment. On the bench, the 3 thickness options support methodical trial fitting during maintenance, rebuilds or parts replacement. The grouped sizes make it straightforward to compare spacing changes, correct excess play and refine the fit of compatible components without replacing the shaft itself.
Other spare parts & accessories
5mm Body O-Rings, model accessory, 10 pieces
300054384€3.09
These 5 mm body O-rings are small model accessory parts that make a visible difference at the body mounts. Fitted to body mount rods, they allow fine height adjustment of the bodyshell position, so the shell can sit with a more controlled fit on the chassis during setup. The set contains 10 O-rings for replacement stock or fresh installation on compatible body posts. Their role is not limited to spacing: each ring also provides a cushioning effect between the bodyshell and the mount point. On rougher driving surfaces, that added cushion helps reduce body chatter that can appear when the shell moves against the posts over bumps. This gives the shell mount a tidier, more settled feel while the model is running. In workshop use, the rings are easy to keep on hand for routine maintenance, rebuilds, or shell changes between different bodyshell setups. They suit drivers who fine-tune shell height on body mount rods and want spare mounting hardware ready for regular track or car park sessions. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
5mm Shim Set, RC accessory, 0.1 0.2 0.3mm
300053587€11.29
This 5 mm shim set brings precise spacing control to RC chassis work, with 3 thicknesses at 0.1 mm, 0.2 mm and 0.3 mm for fine mechanical adjustment. Used at 5 mm fitment points, the shims help take up excess movement where a cleaner, tighter setup is needed around suspension parts or wheel axles. The set includes 30 shims in total, arranged as 10 pieces of each thickness, which supports repeated setup changes without relying on a single size. Small spacing differences can change how parts sit against each other, and these thin rings make those corrections measurable rather than improvised. On a maintenance bench, they can be selected to match the amount of free play present at a given point. On a fresh build, they support more exact placement of moving parts before the chassis goes into use. The shim assortment suits both on-road and off-road Tamiya vehicles, so the same pack can serve different running platforms in one workshop. Whether the goal is tidying axle movement, refining suspension fit or keeping a race chassis more closely adjusted, the 5 mm format gives a compact tuning part that earns its place in a spares box.
Other spare parts & accessories
6 mm Shim Set, model accessory, 0.1 0.2 0.3 mm
300053726€16.29
This 6 mm shim set brings precise spacing control to model assemblies that need a cleaner fit on 6 mm shafts. With 3 thicknesses at 0.1 mm, 0.2 mm and 0.3 mm, the set supports small corrections where mechanical play affects alignment, rotation or part position. The set contains 30 pieces in total, arranged as 10 shims of each thickness. That spread makes it possible to compare different spacer combinations during a build or while servicing an existing model, instead of working around a single dimension. The thin shim format suits jobs where only a fraction of a millimetre is needed to correct end float or reduce unwanted movement between parts. Used singly or in combination, the spacers help adapt the fit to the exact requirement of the assembly point. On the bench, the set suits gearbox work, axle spacing and other 6 mm shaft applications where measured adjustment matters. As a compact workshop supply for model maintenance, repair or fresh assembly, it adds a practical range of fine spacer sizes that can be kept ready for repeated mechanical setup tasks. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
A-Parts Gearbox F/R 58370, RC spare parts
300004432€14.29
This A-Parts sprue is made for the 58370 and provides black injection-molded components for the gearbox F/R area of the DF-03. The unassembled runner groups housing halves, covers and structural sections in one set, giving repair work a direct route back to the intended drivetrain layout. The molded pieces show reinforced ribs, screw holes and cylindrical shaft or bearing mounts that matter when a transmission case needs its original geometry. A larger frame-like section with elongated slots adds another chassis-facing support element, while rounded shell parts serve as protective case sections around moving drivetrain parts. Because the components are supplied on the sprue, each shape stays clearly separated until preparation begins, which helps with part checking before installation. The glossy black finish matches the technical look of many RC chassis internals. This spare parts set suits maintenance benches, rebuild projects and targeted gearbox repairs where damaged housings, brackets or covers need replacement with matching forms. It also supports keeping a DF-03 running with dedicated structural parts on hand for future service work.
Other spare parts & accessories
Alligator Clip for P. Stand, model tool set
300074528€5.99
These alligator clips add a simple, controlled way to hold small model parts while cement or paint dries. The spring-loaded hinge and serrated jaws grip components firmly, so freshly finished pieces can stay separated from the work surface and remain easier to handle during careful bench work. Each pack contains 4 matching clips, which supports parallel work on several parts in the same session. The oval wire loop at the end of each clip provides a clear connection point for mounting on a compatible stand. The clips are intended for use with the Painting Stand, Work Stand and Bottled Paint Stand named in the product data, making them a practical addition for painting, gluing and drying steps where direct hand contact can disturb a finish. On a model bench, the clips can hold newly cemented sections while joints set, or keep painted components raised and separated between coats. Their compact metal form suits detail-focused tasks where small parts need a temporary grip point and a cleaner path through finishing work.
Other spare parts & accessories
Alum. Turnbuckle Wrench blue, model tool, 3.0 mm
300053602€14.99
The Alum. Turnbuckle Wrench blue is a dedicated model tool for fine setup work on vehicles with 3 mm adjustable tie rods or camber rods. Its 3.0 mm clamping axle format is made to engage the turnbuckle directly, so alignment changes can be made with a controlled hand movement at the workbench between runs or during a full chassis service. The blue aluminum handle combines low weight with a firm feel, and the ribbed cylindrical shape supports stable finger placement while small adjustments are made. A forked open-end tip slides around the rod section to apply leverage where a standard wrench would be too bulky. This focused shape suits RC maintenance jobs where steering links and camber rods sit close to surrounding parts. The scope of delivery contains 1 clamping axle wrench. On a tuning bench, in a pit box, or beside a partly stripped chassis, this tool supports repeatable suspension and steering setup work without taking extra space. It also works well as a dedicated addition to a model building tool roll where 3 mm linkage hardware is adjusted regularly. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Aluminum Reinforced Tape, model accessory, 50 mm
300053351€10.291 m = €5.15
This aluminum reinforced tape is made for model applications where high heat builds up close to the body shell. In gas operated vehicles, an exhaust pipe can run near the polycarbonate body, and the adhesive aluminum surface forms a heat resistant shield in that exposed area. The roll measures about 50 mm in width and 2 m in length, which gives flexible coverage for trimming sections to the required size. The reinforced construction suits placement along body areas that sit near hot exhaust routing, while the metallic surface is designed to handle heat exposure where direct proximity could otherwise mark or damage the polycarbonate. Scope of delivery: 1x aluminum tape reinforced. Used on RC vehicle body shells and similar model setups, the tape supports focused protection exactly where heat management matters most. It fits practical workshop tasks such as lining a body section near the pipe outlet, covering a local hot spot, or adding a barrier on an inner panel before the next run. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Aluminum Spacer Set 5.5/3mm, model accessory
300053539€14.69
This aluminum spacer set brings precise spacing control to model assemblies that use 3 mm screws. With a 3 mm inner diameter and 5.5 mm outer diameter, the rings sit neatly at screw-mounted connection points where height, clearance or part position needs fine adjustment. The blue and silver finish also makes the different pieces easy to sort on the workbench during setup changes. Inside the set are 6 spacer thicknesses: 0.5 mm, 1 mm, 1.5 mm, 2 mm, 2.5 mm and 3 mm, with 4 spacers supplied in each size. That spread supports small, measurable changes instead of broad jumps, which is useful when tuning the fit of linked parts or correcting alignment across paired mounting points. The reference application shown in the data places the spacers with suspension arm blocks and damper mounts, and the same dimensions also suit other assemblies built around 3 mm screw hardware. On a chassis build or maintenance session, the set supports repeatable adjustments when comparing one mounting position against another. Matching quantities across all 6 sizes help keep left and right sides consistent while leaving room to test different stack heights in mechanical layouts that need exact spacing.
Other spare parts & accessories
Antenna for 56019, model accessory, 175 mm
305365011€4.49
This antenna for 56019 is a dedicated model accessory with a stated length of 175 mm, intended for use where the matching reference calls for this exact part. The slim rod format gives the model a clean, defined finishing detail while keeping the replacement focused on the named application rather than a generic spare. The part is supplied as 1 piece and is described simply as an antenna for 56019, which keeps selection clear when a specific replacement is needed. The visible form shows a long metal rod with shaped ends, including a hooked bend at one end and a coiled section at the other, indicating a functional mounting or connection point within the matching model setup. That concrete shape matters when replacing a missing or bent antenna, because the end form can be just as important as the overall length. Used on the correct model, this 175 mm antenna suits repair work, parts replacement, or the completion of an existing build that needs the specified external component. It fits naturally into workshop tasks such as restoring a stored model, replacing a worn original, or finishing a project with the named 56019 reference in mind. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Antenna Pipe 300mm, model accessory, black
306095010€0.79
This black antenna pipe adds a neat, functional finishing detail to compatible RC model setups. With a length of 300 mm or 30 cm, the tube gives the antenna a defined route and helps maintain a clean layout above the body where a loose wire would look untidy. The straight tube form makes it useful as a replacement part in routine maintenance, after repairs, or when refreshing an older build with worn running hardware. Its single-purpose design keeps the fit straightforward: the pipe sits in the model's antenna mount and supports the aerial in an upright position. The black finish keeps the look understated, which suits a wide range of body colours and chassis layouts without drawing attention away from the model itself. In workshop use, a spare antenna pipe is a practical part to keep alongside other RC maintenance essentials, especially for builds that still use a visible aerial tube. It also suits restorations where small external details help return a model to a complete, ready-to-run appearance. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Antenna Pipe 380mm, model accessory, clear
306095001€0.89
This clear antenna pipe is a straightforward model accessory for RC setups that use an external aerial guide. With a length of 380 mm, it provides a long tube that can be fitted and trimmed to match the required antenna height on the model, keeping the wire routed in a visible, upright position above the bodyshell. The transparent finish leaves paintwork, markings and body lines unobstructed, which helps preserve the look of the completed model while still making the antenna route easy to follow during fitting. Supplied as 1 piece, it works well as a direct replacement for a damaged tube or as a spare kept on hand for workshop use. The simple tube format also makes it useful across routine maintenance tasks where a clean, correctly sized aerial guide is needed. On the bench, the 380 mm length gives enough material for model-specific adjustment before final installation. During transport, storage and running sessions, the fitted tube helps keep the antenna wire guided consistently instead of leaving it loose around the shell area. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Anti-Wear Grease 3g, model lubricant tube
300053439€12.991 kg = €4,330.00
Anti-Wear Grease in a 3 g tube supports smooth maintenance work on model drivetrains by combining high viscosity with precise placement. On differential gears, shafts and drive axles, the grease adheres well to rotating parts, so lubrication stays where the mechanism needs it during repeated movement. The formulation is described for model vehicles and is supplied in a compact tube with a fine, narrow nozzle for controlled dosing on small contact points. That narrow outlet helps place a small amount directly onto gear teeth, axle sections or shaft ends instead of coating surrounding areas. The grease is temperature stable and retains its viscosity over a wide temperature range, which helps keep application characteristics consistent as moving parts warm up in use. The supplied quantity is 3 g, making it suited to targeted servicing rather than bulk workshop filling. In regular upkeep, the tube fits neatly into a field box or bench drawer and is ready for quick drivetrain attention between runs. It suits focused lubrication tasks on compact assemblies where accurate placement matters, especially around differentials and other enclosed rotating components. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Axle Spring (2), spare part for model chassis
309808008€2.99
This set of 2 axle springs is a dedicated spare part for 58347 and is shaped for mechanical return action at the axle assembly. Each spring is formed from silver-coloured metal wire and uses a tightly wound coil with one short straight leg, one longer angled arm and a small loop at the end, making the part easy to identify during maintenance. The geometry shown in the part itself matters: the coiled section stores torsion, while the two arms transfer that force back into the moving mechanism. That makes these springs suitable for restoring rotational resistance, return tension or repositioning in the intended axle location on a compatible model. Supplied as a matching pair, the set supports like-for-like replacement where both sides of an assembly use the same spring form. For workshop use, the clear standalone shape helps with part checking before fitting and with replacing worn, bent or missing hardware in an existing chassis setup. As a model spare part rather than a general hardware spring, it is best used where the 58347 fitment and the pictured form match the original assembly requirement. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
B-Parts Gearbox Super Clod Buster spare parts
300005294€19.49
B-Parts Gearbox Super Clod Buster 58321 is a replacement sprue for model maintenance and repair, bringing key transmission-area components together in one clearly structured set. The black injection-moulded frame presents the parts in their original grouped layout, which helps with visual checking before each piece is removed and installed. The sprue shows 2 large matching housing halves, a rounded cover plate, 2 circular discs with evenly spaced holes, a larger curved cover piece, and several smaller link arms and connectors. One housing half features an integrated cylindrical section, indicating a dedicated enclosure area within the gearbox assembly. The opposite half carries reinforcing ribs and multiple screw points, giving the rebuilt section the same shaped mounting structure as the original part set. Small moulded part numbers are also visible on the frame, which supports part recognition during a careful rebuild. This spare-parts set suits workshop use when a Super Clod Buster gearbox section needs replacement after wear, damage or a detailed restoration. It also helps keep a rebuild consistent by supplying matching moulded pieces from the same B-Parts group rather than mixing unrelated components.
Other spare parts & accessories
Ball Differential Grease 10g, RC lubricant
300053042€11.39
Ball Differential Grease 10g is a dedicated lubricant for ball type differential gearing in RC model vehicles, supplied in a compact tube with an applicator nozzle for controlled placement on small drivetrain parts. The 10 g fill gives a practical amount for routine servicing, whether the differential is being refreshed during a rebuild or maintained between running sessions. The grease is specified for differential use rather than general-purpose lubrication, which keeps the copy focused on the part it is made for. The supplied tube format helps direct the grease into tight mechanical areas where ball differential components need careful coverage. Compatibility notes in the data reference a wide range of chassis families when used with the stated related parts, including XV-01, XV-01T, XV-01 PRO, M-07 CONCEPT, M-08 CONCEPT, TA06, TA06 PRO, TA06 MS, TT-02, TT-02D, TT-01 TYPE-E, TT-01D TYPE-E, TT-02RR, TT-02FT, TT-02B, MF-01X, M-05, M-05 PRO, M-05 ver.II PRO, M-06, M-06 PRO, DT-02, DT-03 and DT-03T. On the bench, the narrow nozzle supports precise application during drivetrain maintenance, helping keep grease where the ball differential needs it instead of spreading it across surrounding parts. In workshop use, the small tube stores easily with other RC service supplies and is ready when a ball diff setup is due for fresh lubricant. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Basic File Set Smooth Dbl. Cut(3), hobby file set
300074104€8.29
The Basic File Set Smooth Dbl. Cut(3) brings 3 distinct file shapes into one compact bench set for shaping, smoothing and refining small model parts. Flat, round and semi-circular profiles make it easier to match the filing surface to the contour being worked, whether the task is cleaning an edge, opening a curve or evening out a narrow recess. Each file is 140 mm long, with a 2.5 mm handle diameter that suits close hand control on detailed work. The double-cut surface uses 38 cuts per cm, giving the files a fine, even bite that supports a smooth finish rather than heavy stock removal. This makes the set especially suited to surface preparation on plastic scale models, while still handling Mini 4WD parts and selected metal areas where careful finishing matters. At the workbench, the different profiles help move from straight runs to rounded sections without switching to oversized tools. Black rubber grips keep the hold consistent during short filing passes, and the included vinyl case stores the 3 files together between build sessions and transport.
Other spare parts & accessories
BB-01 Main Chassis, RC spare part for BBX
319335893€21.29
The BB-01 Main Chassis is the core frame section for BBX 58719 and provides the shaped base around which the vehicle layout is built. Its black molded form combines an elongated tub design with a large central compartment, creating dedicated space for the main internal installation while keeping the underside profile structured by integrated ribbing. Across the frame, molded screw posts and cylindrical mounting areas define where matching assemblies attach, while rectangular side slots add further connection points along the chassis walls. The one-piece construction keeps the geometry consistent across the length of the frame, which matters when replacing a worn or damaged base on an existing BB-01 build. The underside view shows a symmetrical layout with reinforcement lines running through the tub, giving this spare part the form needed to carry the rest of the chassis hardware in its intended position. This replacement part suits repair work, rebuilds and parts-based restoration of a BBX 58719 using the BB-01 platform. It fits naturally into workshop sessions focused on bringing an RC vehicle back into running condition or preparing a fresh chassis foundation for the next stage of assembly.
Other spare parts & accessories
Body Mount Extension Set 5.5 mm, RC car accessory
300054604€7.99
The Body Mount Extension Set 5.5 mm adds a precise height correction to RC car body posts when a different bodyshell calls for more clearance. Each extension piece is designed to work with 5.5 mm to 6 mm diameter body mounts, and the included snap pins lock the selected position through the adjustment holes for a firm mechanical hold. Inside the set are 4 body mount extensions, plus 4 snap pins in 6 mm and 7 mm sizes. The parts are intended for touring car chassis and M-Chassis cars, where body posts may already have been cut down for another shell. Instead of replacing the full mount, this set extends the existing post by 5.5 mm and keeps the mounting point usable for another body setup. The fitting method shown in the leaflet uses the extension on the chassis-side body mount and secures it with a snap pin through the cross hole. This accessory suits workshop adjustments, shell swaps and rebuilds where body height needs a small, exact correction rather than a full change of mounts. It is compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts, making it a practical addition for keeping several RC car bodyshells in rotation.
Other spare parts & accessories
Body Mount Plate BH 7/8, model accessory set
319808269€11.49
The Body Mount Plate BH 7/8 is a model accessory set for the 58441 and 58452 references named in the data. With 2 mounting plates included, it supplies the specific hardware needed for work on the body mount area, whether the goal is replacing an existing part or completing a matching assembly step on the intended build. Each plate is shown as a formed metal component with a rectangular profile, rounded corners, 2 screw holes and a shaped center section. Those details matter during installation, because the hole positions and stamped form help the plate sit in the intended location and connect with the surrounding structure as designed. The BH 7/8 designation keeps the part identification aligned with the named application, which is useful when sorting spares for maintenance or rebuild work. The compact hardware format also makes this set a focused choice when only the mounting section needs attention rather than a wider parts replacement. On a workshop table, the 2 plates can be set alongside the target chassis parts and matched directly to the specified 58441 or 58452 build. For routine upkeep, rebuilds or parts sorting, this set keeps the replacement task centered on the exact mounting hardware named in the data. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Body Mount Set, RC spare parts for DT-03 chassis
300050855€9.99
This E-parts body mount set is made for selected RC chassis and supplies the core parts needed when body fixing points need replacement. It fits DT-03, DT-03T, G6-01, G6-01TR, TL-01, FF-02 and WR-02 applications named in the data, combining molded mounts with matching hardware for a direct service task at the shell mounting area. The black components are shaped for chassis attachment and body support, while the included mounting material covers the fastening work tied to this set. Multiple hole positions on the molded parts allow the mounting point to be set according to the chassis layout and shell position, which matters when replacing worn posts or correcting body fit after use. As E-parts, these components suit maintenance benches, rebuilds and parts boxes where chassis-specific replacements need to stay close at hand. The set works well during routine RC upkeep, after a cracked mount, or when a stored chassis is being returned to running condition with the correct fixing parts. In workshop use, the combination of mounts and screws keeps the repair centered on one compatible set instead of mixing unmatched hardware from different spares. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
CC-01 D-Parts, body mount spare part
309005741€7.99
CC-01 D-Parts is a body mount spare part set for model maintenance on the 58324 reference. The set provides 2+2 replacement parts, making it useful when original mounting points are worn, missing or damaged and the shell needs the correct support points back in place. The designation D Parts identifies this set within the CC-01 parts structure, which helps when matching replacements to an existing build or planning a repair. As a model supply rather than a general-purpose accessory, it is intended for a specific application instead of broad compatibility across unrelated chassis types. The body mount function matters at the point where the shell is positioned and secured, so using the named replacement set helps keep that connection in line with the original layout. Batteries are not included. This spare part set fits naturally into workshop tasks such as replacing lost components during a rebuild, refreshing a used chassis, or keeping matching parts on hand for future maintenance. It also works as a practical stock addition alongside other service parts for the same CC-01 reference, especially when a repair calls for the exact D Parts designation rather than a substitute. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
CC-01 M-Parts Toyota, model spare parts, 2 pcs
309115264€26.49
CC-01 M-Parts Toyota is a spare parts set for model work on kit 58445 and provides 2 replacement parts for the matching build. The black injection-molded frame groups the components on a single sprue, so the original shapes, attachment points and part orientation stay easy to reference during repair or rebuild tasks. The molded layout shows several distinct forms, including long curved sections, mirrored arm-shaped pieces, smaller mounting blocks and round connection elements. These details matter when a damaged section needs to be replaced with a part that matches the intended geometry of the original assembly. Because the pieces remain attached to the runner before removal, each section can be identified against the build step before cutting it free. The preformed holes and connection points support clean integration with the corresponding assembly positions in the specified model. This set fits situations such as replacing lost parts during a paused build, refreshing worn sections on an existing chassis, or keeping a stored model ready for future maintenance. In a workshop drawer or alongside a current project, the sprue serves as a direct source for matching CC-01 M-Parts Toyota components tied to kit 58445. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
CC-02 LF 6mm Ball Collar (18), chassis parts
300054945€21.19
The CC-02 LF 6mm Ball Collar set adds a focused drivetrain and suspension upgrade to CC-02 chassis cars by replacing kit-standard C9 parts with low-friction steel components. Each collar uses a plated surface to minimise resistance where moving parts pivot and slide, so link-arm action feels cleaner and more direct when the chassis works over uneven terrain. The pack includes 18 collars in total. Of these, 16 are assigned to the link arms, while 1 fits the steering linkage and 1 fits the battery plate, giving the set a chassis-specific layout rather than a generic hardware mix. The 6 mm size matches the stated fitment, and the steel construction brings a precise contact surface to the suspension hardware. In rigid suspension setups, that lower resistance helps the links move with less drag through their travel, which supports more consistent articulation across rough sections. Installed on a CC-02 build, the collars suit tuning sessions that focus on suspension response and chassis control rather than cosmetic changes. They also fit maintenance work where worn standard parts are being swapped for smoother-running hardware in the steering and link assemblies.
Other spare parts & accessories
Chassis Protective Sticker, RC accessory, 0.3 mm
300054499€15.79
This hard protective film is made for the underside of an R/C vehicle chassis, where repeated contact with the track surface can leave marks during regular running. At 0.3 mm thick, it adds a thin sacrificial layer that takes the abrasion while leaving the chassis itself covered. The transparent finish keeps the visual character of the model unchanged. The sheets measure 180 x 330 mm and come in a pack of 2, providing material that can be cut to suit different chassis shapes and lengths. The highly adhesive surface is intended to bond securely under the main chassis, where constant rubbing and sliding place the greatest demand on protection. Because the film is supplied as full sheets rather than pre-cut sections, it can be adapted to a wide range of R/C vehicle layouts. This makes it useful both for a fresh application and for replacing worn film after repeated use. In workshop preparation, the film can be trimmed before a run and applied to the areas most exposed to scraping. After track sessions on abrasive surfaces, the protective layer helps keep the underside cleaner in appearance and reduces direct wear on the chassis base.
Other spare parts & accessories
Craft Tweezers, papercraft tool, 140 mm
300074080€22.49
These craft tweezers are designed for papercraft work, where small tabs, narrow folds and glued sections need controlled handling. At 140 mm in length, they offer a compact format that sits easily in the hand while keeping the tip visible during close, detailed tasks. The foremost part uses an original TAMIYA design created to improve effectiveness in gluing, paper bending and the drying process. That shape helps hold and guide thin paper parts with more control than fingertips alone, especially when working along edges, corners and tight contact points. The tweezers are made from SUS410 stainless steel and finished with a hairline surface, giving the tool a precise, clean look suited to bench work and hobby tables. The pointed, angled form also helps reach into small spaces between folded sections without covering the working area. Sticker and decal application is another practical use, particularly when small markings need careful placement before final pressure is applied. On a papercraft build, during detail finishing, or while handling delicate printed parts, these tweezers support steady, accurate movements across each step of the work. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
DF-03 Chassis, RC spare chassis frame
309335449€13.99
The DF-03 Chassis serves as the structural core for a compatible RC vehicle build, forming the main lower frame that carries the mechanical layout. Its black molded construction combines an elongated central body with raised side sections, giving the assembly a defined platform for attaching major modules while keeping the underside compact and purposeful. Across the frame, multiple drilled and countersunk mounting holes create fixed attachment points for screws and hardware. A large oval opening in the center is joined by shaped slots and recessed areas, which help organise the placement of installed parts and leave room for routed connections within the chassis layout. One end uses a rectangular mounting section with 4 visible countersunk holes, while the opposite end extends into a flat plate with additional drilled points for further fitment. These details make the frame more than a simple base plate: it establishes the geometry that the rest of the DF-03 build follows. Used as the lower platform in a rebuild, repair or replacement project, this chassis frame supports a clean restart when an existing vehicle needs a fresh foundation. It also suits workshop stock for keeping a compatible DF-03 machine in running condition after wear or damage to the original frame. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
DN-01 Inner Sponge Front Kit, foam insert set
300051448€6.69
DN-01 Inner Sponge Front Kit is a front foam insert set for selected buggy chassis, built to sit inside the front tyres and support their shape while the model is running. The set contains 2 grey open-cell foam rings and is specified for DT-03, DT-03T and DT-02 chassis applications. Inside the tyre, each insert fills the cavity between tyre and wheel so the front end keeps a more defined profile as loads shift through steering inputs and uneven ground. The donut-shaped foam form shown in the set is intended for front use, which matters when tuning the balance of a buggy around turn-in and directional control. Compatibility is stated with tyre references 51207 and 54284, giving a clear match point when replacing worn inserts or building a fresh wheel and tyre setup. The foam material also keeps the setup light compared with heavier internal fillers. This 2-piece set suits routine maintenance, a chassis refresh or a second wheel set prepared for another surface. On a running DT-03, DT-03T or DT-02 build, fresh front inserts can help restore a more even tyre profile after repeated use and compression. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Double-Sided Tape 20mm x 2m, black tape roll
300054693€14.79
This black double-sided tape gives R/C model work a clean, practical way to mount and protect equipment in one step. The 20 mm x 2 m format provides a continuous roll that can be trimmed to the exact length needed, whether the task calls for a short fixing point or a longer contact strip across a wider surface. Its heat-resistant construction suits model layouts where mounted components sit close to running electronics and need a dependable adhesive layer between parts and the chassis or mounting surface. The foam-style tape profile also helps create a slight buffer where equipment needs both attachment and a degree of separation from the surface below. Compared with pre-cut strips, the roll format keeps sizing flexible during bench work and repeated maintenance. It can be cut for receiver boxes, electronic modules or other onboard components where tidy placement matters. One roll is included.
Other spare parts & accessories
DT-04 Chassis blk, RC chassis part, black tub
319335912€12.79
DT-04 Chassis blk provides the core lower frame for an RC model build, with a black molded tub shape that brings the main structure together in one substantial component. Raised sidewalls, integrated screw posts and a ribbed interior create a clear base for positioning major assemblies while keeping the layout defined on the bench. The molded underside geometry shows how this chassis part is designed to carry more than a flat floor alone. Reinforcing ribs run through the interior to stiffen the form, while circular holes and mounting points are placed directly into the tub for mechanical fastening. The extended end plate section adds another structured area with several fixing holes and ribbed supports, giving the build extra attachment space where connected assemblies need a stable anchor. As a replacement or project part, this chassis tub restores the original lower structure without changing the designated DT-04 layout. On a rebuild, repair or fresh parts-based assembly, this component sets the position for the rest of the chassis around a single molded base. The black finish matches the functional look of an RC underframe, and the one-piece construction keeps the mounting geometry together in the form intended for the DT-04 platform. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
DT-04 Full Ball Bearing Set, chassis accessory
300022092€24.29
The DT-04 Full Ball Bearing Set adds a precise drivetrain and steering upgrade to the DT-04 chassis with 18 metal bearings in 3 sizes. Installed in rotating points across the chassis, the bearings replace plain support parts with rolling contact, which helps moving assemblies turn with less drag and a smoother mechanical feel. The set includes 4x 850, 4x 1050 and 10x 1150 bearings, matching the different mounting points used in the DT-04 layout. That size spread makes the set suitable for a complete bearing conversion rather than a partial refresh of only one section. In the drivetrain, freer rotation supports more efficient transfer of motor output through the transmission. In the steering system, the same bearing construction helps linked parts move with a more direct action at the front end. This chassis accessory suits a new DT-04 build as well as later workshop maintenance when worn parts are being replaced. The small, shielded metal bearings are arranged as a dedicated fitment set for the platform, making them a practical choice when the goal is a cleaner-running buggy with reduced mechanical resistance in its key moving assemblies. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
DT-04 M Parts, chassis mount spare parts
319115594€11.49
The DT-04 M Parts gearbox and chassis mount set provides replacement components for RC model maintenance where structural sections need to be renewed. Supplied as black injection-moulded parts on sprues, the set is arranged for clear identification before trimming, sorting and installation. The visible parts tree contains multiple connected components shaped for functional mounting and support roles, including chassis-related sections, bracket forms and frame elements. This format helps keep small pieces together until they are needed at the bench and allows each part to be checked against the original assembly before removal from the runner. The moulded layout is suited to repair work after wear or damage, and it also supports planned rebuilds where a fresh gearbox or chassis mounting section is required. The technical presentation keeps the focus on fit, structure and correct part selection. On a workbench, the sprue format makes it easier to compare each section with the existing RC vehicle before cutting and fitting. During servicing, the set can be used to replace damaged mounting areas, refresh key structural points or prepare a stored chassis for reassembly with the correct DT-04 M components. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
E-Ring Set, model accessory, 17 pcs 2mm 3mm 4mm
300050380€2.99
This E-Ring Set brings small but essential fastening hardware into model assembly with 17 dark metal retaining clips in 3 sizes: 2 mm, 3 mm and 4 mm. Each E-ring is shaped to snap onto a matching groove on a shaft, axle, rod or pin, where it holds a mounted part in position while keeping the fixing compact and mechanical. The size spread makes the set useful across different fixing points instead of limiting the bench to a single diameter. In practical use, an E-ring is pressed onto the grooved end of a metal part so the open side clips over the shaft and the ring seats into place. That mechanism suits wheel mounts, axle retainers and other small moving assemblies where a screw or nut would take more space. The dark metal finish matches the function-focused character of workshop spares and replacement hardware. Kept in a parts box, drawer insert or service tray, the set supports routine maintenance as well as the recovery of lost clips during rebuilds. The stated scope of delivery is 1 set with 17 E-rings, giving a ready stock of common small retainers for model work that depends on secure, correctly sized mechanical fastening. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
F104 Disc Ball Set, chassis spare part, 3 mm
300051347€5.69
The F104 Disc Ball Set is a dedicated spare part for ball differential maintenance on compatible F104 series chassis. With 8 steel balls and matching pressure plates in a 3 mm format, it supplies the key contact parts used in the differential assembly and keeps replacement focused on the stated drivetrain area. Compatibility is specified for F104PRO II chassis, F104W chassis, F104 chassis and F103GT chassis. The steel construction suits the repeated contact points inside a ball differential, where smooth, consistent interaction between the balls and plates is central to the mechanism. Instead of a broad assortment of unrelated workshop parts, this set stays specific to one service task and one family of chassis. The scope of delivery contains 1 balls and pressure plate set. On the workbench, that clear compatibility helps when preparing a planned refresh of an existing F104 drivetrain or keeping matching spare parts ready between running sessions. In a parts box for formula chassis maintenance, the 3 mm specification gives a direct reference for selecting the correct replacement set for the listed platforms. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Flanged Tube, model accessory, 4.5 x 3.5 mm
309804382€4.49
This flanged tube is a small model accessory specified at 4.5 x 3.5 mm and listed with detailed dimensions of 3.1 x 4.5 x 4.0 mm. The flanged form helps distinguish the part from a plain tube when a build or repair calls for a defined edge and a precise seated position within an assembly. The pack contains 2 matching pieces, which suits jobs that need a pair of identical fittings rather than mixed hardware. In model maintenance, exact measurements matter, and the stated 3.1 mm, 4.5 mm and 4.0 mm figures give a clear reference when checking parts against an existing setup. The compact format makes this accessory relevant for detailed replacement work, careful restoration, or keeping spare hardware ready for future servicing. On the workbench, a correctly sized flanged tube can save time during part selection because the specification is already narrowed to a defined format. For ongoing model upkeep, 2 identical tubes also make it easier to complete symmetrical mounting points or store a matched spare set alongside other small workshop parts. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Flanged Tube, model accessory, 4.5 x 3.5 mm
309808021€3.09
This flanged tube set is a small but specific model accessory for repair, maintenance and parts matching. The pack contains 2 pieces, and the stated 4.5 x 3.5 mm format gives a clear reference point when an existing assembly calls for the same size and flanged construction. The source data also lists the dimensional specification as 3.1(4.5) x 3.5(4.0) mm, which adds another concrete identifier for checking fit against a current build or replacement need. A flanged tube is typically chosen for its defined shoulder and seating position within a mechanism, so the named form matters as much as the measurement when selecting the correct hardware. In a workshop drawer, this kind of small component helps keep repair jobs moving without substituting an unmatched part. Used during model upkeep, rebuilds or careful parts sorting, the 2-piece set supports direct replacement where the same tube is needed again. It also works as a practical stock addition for builders who keep commonly used hardware sizes on hand for future service tasks. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Gear Differential Putty, tuning accessory, 25 g
300042247€8.29
Gear Differential Putty is a tuning accessory for transmission differentials in model vehicles, supplied as 25 g in a plastic case. By controlling the differential action, it creates an effect close to direct coupling, changing how the drivetrain responds when load builds through the driven wheels. The putty is applied as a physical insert rather than a mechanical replacement part. The rolled material is cut with scissors, formed to about 3 mm in diameter, and then packed into the transmission differential. This gives a clear, hands-on way to adjust internal resistance with small portions instead of replacing the whole differential assembly. The method suits fine setup changes, because the amount and shape of the putty can be prepared before installation. The supplied case keeps the material contained between workshop sessions. Under heavy load from the road surface, the transmission moves to help avoid damage to the drive system, so the tuning effect is paired with protective drivetrain behavior. This makes the putty useful for setup work on model vehicles where differential response has a direct influence on handling and power delivery during running sessions. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Heat Resistant Doublesided Tape, model accessory
300050171€6.791 m = €11.32
Heat Resistant Doublesided Tape (5) is a model accessory for mounting, repair and ongoing workshop use where an adhesive layer needs to stay in place during detailed build steps. The set contains 1 adhesive tape pack with 5 pieces, giving a clear supply for replacement or fresh application on compatible model tasks. This version is identified as a replacement for 500908078, which helps match it to an existing parts requirement without guesswork. The heat resistant specification makes it suitable for applications where standard adhesive material may not be the intended choice. As a model supply rather than a finished vehicle or kit, the focus stays on a practical consumable that supports fitting, securing and maintenance work across build benches and repair sessions. On an active project, the 5-piece format allows one strip to be used where needed while the remaining pieces stay ready for later adjustments, part changes or follow-up repairs. It fits naturally into model assembly, restoration and parts replacement work where accurate, purpose-made supplies keep the process moving. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Hi-Torque Servo Saver Black, RC spare part
300051000€17.99
Hi-Torque Servo Saver Black brings a focused steering upgrade or replacement part to RC chassis work, with a 26-piece set that combines black molded components and metal hardware in one servo saver assembly. Built for the MF-01X chassis, it gives the steering system the dedicated parts needed where controlled force transfer and linkage connection matter during running and maintenance. The set contains the servo saver itself together with screws, nuts, washers, retaining rings and threaded ball studs. Those ball studs create the mounting points for linked steering rods, while the retaining rings secure the relevant rotating or stacked parts within the assembly. Combined use with 54120 is specified in the data, which matters when matching the setup to the intended chassis configuration. The black finish keeps the installed assembly visually consistent with surrounding chassis parts, and the grouped hardware avoids piecing together separate fasteners for this specific mechanism. On the bench, this spare part suits routine servicing, parts replacement or a fresh chassis build centered on the MF-01X platform. It fits naturally into steering work where worn saver parts, missing hardware or a chassis-specific installation calls for the correct component set rather than a generic substitute. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Hi-Torque Servo Saver, 1:10 accessory, white
300050473€17.29
The Hi-Torque Servo Saver in white is a steering accessory for RC model setups that need a precise, compatible linkage part. Designed for all Tamiya chassis and many 1:10 models, it supports cleaner steering response while improving return after direction changes, making it useful for fresh builds, maintenance work and replacement installs. The set combines white molded components with the small hardware needed to mount and connect the assembly, including screws, nuts, washers, retaining rings and ball-ended linkage parts. Those ball-joint style connectors support the steering linkage where controlled movement and secure attachment matter, while the retaining rings and fasteners complete the mechanical fit. For MF-01X chassis, combined use with 54120 is specified, which helps align the part choice with that chassis configuration. On a workshop bench, this servo saver suits routine servicing as well as targeted steering updates on compatible 1:10 RC cars. It also works as a useful spare for keeping an existing chassis ready when worn steering parts need to be replaced with matching hardware and mounting pieces. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
J-Parts for Subaru Impreza WRC'08, model parts
309115244€14.19
This J-Parts set is made for the Subaru Impreza WRC'08 from kit 58426 and serves as a dedicated replacement parts option for that exact model. The defined J-Parts designation helps identify the correct section within the original build, which is useful when an existing model needs a missing or worn component replaced rather than improvised with a non-matching part. Because the data names this set specifically for 58426, the fit reference is tied to that kit and to the Subaru Impreza WRC'08 body version listed here. That makes the set relevant for repair work, restoration of an older build, or keeping a previously assembled model in running or display condition with the intended parts group. As model supplies, these parts are aimed at maintaining an existing build rather than changing it into a different version. On the workbench, a dedicated replacement set like this can save time when sorting spares for a rebuild or when completing a model that is missing one defined parts section. It also gives collectors and builders a clear way to keep kit 58426 aligned with its original specification over repeated maintenance cycles. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Joint Boot BB21, spare part for Mt.Beetle
316255002€4.39
Joint Boot BB21 is a model spare part specified for the Tamiya 58618 Mt.Beetle. The long black component has a bellows-style form with several ribbed sections and thicker collar points, a shape used where a fitted cover needs to move with the linked assembly while keeping the area around the joint enclosed. The moulded one-piece construction gives the part a clean technical profile for maintenance, replacement or a faithful rebuild of the original model layout. Its accordion-like sections indicate controlled flexibility, allowing compression and extension as the connected mechanism moves. The stepped ends and central collars provide defined seating points that match the intended mounting position rather than acting as a generic sleeve. That makes BB21 useful when an existing boot is worn, split or missing and the assembly needs the correct designated part again. In workshop use, this spare part fits naturally into repair sessions focused on keeping a Mt.Beetle complete and mechanically tidy. It also suits stock-box planning for regular running models, where model-specific service parts help keep maintenance work straightforward and consistent with the original specification. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
LED Stopper, model accessory, 2 pcs.
309005859€5.99
This LED Stopper set is a focused model accessory for detailed assembly work, supplied as 2 sprues with multiple molded stopper pieces ready to be removed and fitted as needed. The compact format keeps matching parts together on the runner, which helps maintain order while preparing small components at the bench. Each sprue is injection molded in ABS and marked with part identifiers, giving the set a clear technical character that suits precise hobby tasks. The forked stopper shapes shown on the runners support controlled placement in builds that call for small retaining parts. Because the pieces stay attached until needed, sorting and handling remain straightforward during preparation. The uniform molded layout also helps when checking parts before cutting them free. On the workbench, this set fits naturally into careful model sessions where small components and clean organization matter. It suits builders who want a dedicated supply of matching stopper pieces on hand for compatible projects and detail-focused assembly steps. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
LW X-Joint for W Cardan, model spare part
300042319€5.69
The LW X-Joint for W Cardan is a dedicated spare part set for compatible model driveline assemblies. With 4 replacement pieces in the pack, it supports routine maintenance where worn joint parts can affect the movement of a W Cardan setup during running sessions. Used in the correct compatible assembly, each X-joint serves as a small but important connection point within the driveline. Replacing these parts can help restore the intended fit and motion of the mechanism without changing the overall layout of the model. The set is suited to workshop stock, scheduled service work, or repair after wear on an existing compatible setup. Its focused format keeps the purchase tied to one concrete task: renewing the X-joint section of a W Cardan assembly with matching spare parts. On the bench, the 4-piece pack is practical for keeping replacement parts ready before a maintenance session starts. It also suits hobby storage where frequently used driveline spares are kept together for compatible model repairs and ongoing upkeep. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
M-05 Ver.II A Parts, chassis spare parts set
300054605€18.79
The M-05 Ver.II A Parts chassis set is a focused upgrade and replacement option for the M-05 platform, bringing Ver.II chassis geometry to existing builds while also restoring worn sections on the M-05 Ver.II PRO. Black molded chassis components form the core of the set, with the layout shaped around updated battery and servo fitment options. Within the chassis, parts A8 and A9 allow installation of square-shaped battery packs in place of earlier chassis pieces, and the instruction data notes that the battery pack is secured with glass tape. A redesigned A3 section opens space for a low-profile servo during assembly, while standard-size servo installation uses part A7 with 3 x 18 mm tapping screws. The motor position shifts 3 mm closer to the center, changing the weight distribution within the chassis. The set is also compatible with Item 54606 one-piece lower suspension arms, which allows rebound stroke adjustment when that arm set is used. Some bodies may require trimming where they interfere with the chassis. This chassis parts set suits maintenance, repair and specification updates on compatible M-05 variants. It fits naturally into workshop sessions that focus on replacing broken sections, adapting battery layout, or revising servo placement on an existing front-wheel-drive touring car build.
Other spare parts & accessories
M-08/M-07 Concept A Parts, chassis spare set
300051595€14.29
The M-08/M-07 Concept A Parts set is a dedicated spare tree for keeping compatible chassis cars ready for service. Designed for the M-08 CONCEPT chassis and M-07 CONCEPT chassis, it supplies the A parts needed when original mounting components are damaged, worn or missing after regular RC use. The set contains 1x A parts tree with 24 pieces and provides spares to replace parts on 1 chassis. Its focus is the body mounting area: body mounts and body mount stiffeners restore the connection points that support the shell on the chassis. That makes this set useful when a shell no longer sits correctly, when mounting points have been stressed during running, or when a rebuild calls for fresh hardware from the original parts group. As a model-specific spare set, it stays close to the intended chassis layout instead of relying on mixed universal hardware. The parts suit workshop stock, routine maintenance and targeted repairs on compatible M chassis builds. During a rebuild, the tree format helps keep related components together while damaged pieces are exchanged. For regular RC maintenance, this spare set covers a focused section of the chassis with the exact A parts group named for the M-08 CONCEPT and M-07 CONCEPT platforms. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Manta Ray A-Parts Gearbox Spare Parts Set
300005375€15.49
The Manta Ray A-Parts gearbox set supplies replacement molded components for the 58087 model, centering on the transmission and nearby chassis-mounted assemblies. The black parts come on a single sprue, making each section easy to identify before cutting and positioning during repair or rebuild work. Visible pieces include a large gearbox housing with multiple screw holes, a separate cover or mounting plate, a cylindrical housing element, several hexagonal hub-like parts, and a wider support bracket. This mix supports work in the drivetrain area where aligned mounting points and matching shapes matter. Because the parts are molded as a coordinated set, the geometry across the housing and support sections stays consistent with the intended assembly. The sprue format also helps keep smaller pieces together until they are needed at the bench. This spare parts set suits restoration of a used chassis, replacement of worn transmission-area pieces, or preparation of a stored Manta Ray 58087 for running condition again. It also fits organized workshop stock where model-specific service parts are kept ready for future maintenance.
Other spare parts & accessories
MB-01 Full Ball Bearing Set, chassis accessory
300022026€26.29
The MB-01 Full Ball Bearing Set equips the MB-01 chassis with a complete 18-piece bearing package sized for its rotating assemblies. With 12x 1050 bearings, 2x 1280 bearings and 4x 850 bearings, the set brings together the exact mix needed for a full conversion in one chassis-focused pack. Ball bearings are used at points where shafts and axles rotate, replacing plain bushings with rolling elements that reduce friction during operation. In an RC chassis, that lower drag can support freer drivetrain movement and a more direct mechanical feel across the running gear. The different bearing sizes in this set are arranged to match the MB-01 layout, so the contents are not a generic assortment but a model-specific combination for this platform. The compact format also makes the set useful for routine servicing, a fresh build or a rebuild after wear on existing running parts. Kept alongside other workshop spares, the bearing pack gives a straightforward way to refresh the MB-01 chassis with the full quantity already counted out for the job.
Other spare parts & accessories
MB-01 LD-Parts Fr/Re. Lower Deck, chassis parts
300051725€8.49
The MB-01 LD-Parts Fr/Re. Lower Deck provides the front and rear main chassis sections for the MB-01 platform, giving a model build the structural base that sits at the center of the assembly. These molded chassis parts are intended for replacement, repair or a fresh rebuild where the original lower deck needs to be restored with the correct form and mounting layout. The included parts consist of the main chassis front section and main chassis rear section. In the molded structure, raised side walls, screw mounting posts, recessed fixing areas and formed channels create the attachment points and alignment surfaces needed for surrounding assemblies. This kind of lower deck geometry matters in a chassis build because it determines how major components sit in relation to each other across the front and rear of the platform. The matched front and rear layout also helps maintain the intended fit of connected parts made for the MB-01 chassis. On the bench, these chassis sections suit routine maintenance, accident repair or the revival of a stored model that needs a new structural core. They also work well as workshop spares for MB-01 owners who keep replacement parts ready for ongoing running and rebuild sessions. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
Mt.Beetle body mount parts, model accessory set
319000834€12.99
This accessory set provides E Parts body mount components for the 58618 Mt.Beetle and supports accurate replacement work on the body mounting section of the build. The black molded pieces are supplied on a single sprue frame, giving a clear overview of the included shapes before removal and helping keep the parts organized during workshop preparation. Visible on the runner are several distinct molded forms, including bracket-like pieces, rod-shaped elements, a ring-shaped part, a slotted panel and a larger curved housing with round and square openings. That layout helps identify each section during repair or rebuild work and gives model builders the matching geometry needed for the intended mounting area. As a dedicated spare and replacement set rather than a general hardware assortment, it focuses on the specific fit and form required for the 58618 Mt.Beetle. The set works well when an existing chassis needs fresh mounting pieces after wear, loss or damage, or when a stored build is being brought back into running condition with matching replacement parts. It also suits bench stock for ongoing maintenance, where the correct molded components are ready for the next rebuild step. Warning! Not suitable for children under 14 years.
Other spare parts & accessories
R/C Body Mount Hole Patches, RC accessory, 0.5 mm
300054785€6.69
These R/C body mount hole patches add discreet reinforcement where bodyshells take repeated stress. The clear 0.5 mm material strengthens the area around each mounting point while leaving the shell finish visible, so repairs stay unobtrusive on painted or decorated bodies. Each sheet provides 8 patches, giving several mounting points the same treatment in one session or leaving spares ready for later maintenance. The 6.5 mm internal diameter is sized for use on most body mount holes, making the patches a straightforward choice for many R/C bodyshell layouts. Their ring format focuses support around the opening itself, where cracks and widening can start after repeated fitting, removal and running. In workshop use, the patches suit routine bodyshell upkeep before damage spreads further around the post area. They also work well when refreshing a frequently used shell, helping keep mounting holes neat through repeated body changes between running sessions. This accessory is intended for model hobby use and is marked 14 years and up.