Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

Military model vehicles 1:35

1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

300035047

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

1:35 BW Flak-Panzer Gepard (1)

Military model vehicles 1:35

1:35 BW Flak-Panzer Gepard (1)

300035099

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.   Warning! Not suitable for children under 14 years.

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

Military model vehicles 1:35

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

300035050

€32.99

Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1)   Warning! Not suitable for children under 14 years.

1:35 Bundeswehr Leopard 2A6 (3)

Military model vehicles 1:35

1:35 Bundeswehr Leopard 2A6 (3)

300035271

€63.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.   Warning! Not suitable for children under 14 years.

1:35 Ger. PzKpfw. IV Ausf. D (3)

Military model vehicles 1:35

1:35 Ger. PzKpfw. IV Ausf. D (3)

300035096

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

Military model vehicles 1:35

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

300035194

€45.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.   Warning! Not suitable for children under 14 years.

1:35 US Med.MBT M48A3 Patton (2)

Military model vehicles 1:35

1:35 US Med.MBT M48A3 Patton (2)

300035120

€27.99

Article number: 300035120 Product: 1:35 US Med.MBT M48A3 Patton (2) This is a 1/35 scale plastic model kit of the American M48A3 Patton tank, which served with distinction during the Vietnam War. ★The tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet is accurately reproduced. ★Details such as the searchlight and machine gun cupola are also brimming with realism. ★The kit includes accessory parts such as an engine exhaust snorkel, jerry cans, and spare track links as well as 2 tank crew figures.

1:35 Brit. Tank Churchill Mk.VII (6)

Military model vehicles 1:35

1:35 Brit. Tank Churchill Mk.VII (6)

300035210

€39.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

1:35 Bundeswehr MBT Leopard 1 (1)

Military model vehicles 1:35

1:35 Bundeswehr MBT Leopard 1 (1)

300035064

€23.49

  Warning! Not suitable for children under 14 years.

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

Military model vehicles 1:35

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

300035259

€39.99

Article number: 300035259 Product: 1:35 Ger. Krupp Protze w/ 37mm PAK (4) About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm Pak Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland. About the Model ★1/35 scale ★Overall length: 250mm ★Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. ★A 3.7cm Pak anti-tank gun and various accessories are part of the set. ★4 all-new figures and decals for 4 different markings are included.   Warning! Not suitable for children under 14 years.

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

Military model vehicles 1:35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

300035020

€22.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

Marder II

Military model vehicles 1:35

Marder II

300035060

€27.49

MARDER II S.P. GUN

1/35 Ger.Pioneer & Goliath Set

Military model vehicles 1:35

1/35 Ger.Pioneer & Goliath Set

300035357

€19.29

Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

1/35 Sherman Easy8 EuroTheater

Military model vehicles 1:35

1/35 Sherman Easy8 EuroTheater

300035346

€52.99

Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm   Warning! Not suitable for children under 14 years.

1:35 Brit. BT. Matilda Mk.III/IV(3)

Military model vehicles 1:35

1:35 Brit. BT. Matilda Mk.III/IV(3)

300035300

€52.99

Article number: 300035300 Product: 1:35 Brit. BT. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296).   Warning! Not suitable for children under 14 years.

1:35 Brit. Tank Comet A34

Military model vehicles 1:35

1:35 Brit. Tank Comet A34

300035380

€52.99

Article number: 300035380 Product: 1:35 Brit. Tank Comet A34 Tamiya is proud to welcome the Comet to the 1/35 Military Miniature Series for the first time! At the end of WWII, the British Army developed the Comet – which became a base of later British Army tanks such as the Centurion - as a counter for the powerful German Tiger and Panther tanks. With the hull design based upon the structure of the existing armored cruiser tank Cromwell, the Comet employed a larger turret with a powerful 17-pounder gun. The Comet first saw action in the Operation Varsity in March 1945, and around 900 including ones produced after WWII were built.   Warning! Not suitable for children under 14 years.

New
1:35 BW MBT Leopard 1A4 (1)

Military model vehicles 1:35

1:35 BW MBT Leopard 1A4 (1)

300035112

€23.99

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★ From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★ Notable details include the MG3 machine gun and searchlight. ★ Comes with a commander figure to add even more detail to your finished model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Ger. 20mm Flakvierling 38

Military model vehicles 1:35

1:35 Ger. 20mm Flakvierling 38

300035091

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38   Warning! Not suitable for children under 14 years.

1:35 Ger. Cargo Truck Krupp Protze (3)

Military model vehicles 1:35

1:35 Ger. Cargo Truck Krupp Protze (3)

300035317

€34.99

Article number: 300035317 Product: 1:35 Ger. Cargo Truck Krupp Protze (3) Supporting the German army's mechanized Blitzkrieg during the early stages of WWII was the 6X4 Krupp Protze light truck. Popularly known as the "boxer" due to its air-cooled flat-4 engine, this vehicle provided valuable support for the rapidly moving army by towing artillery pieces and carrying troops and supplies. It's unique sloped engine cover offered excellent forward visibility and the truck was well-liked for its reliability and ease of maintenance   Warning! Not suitable for children under 14 years.

1:35 Ger. Horch 4x4 Type1A Veh. (1)

Military model vehicles 1:35

1:35 Ger. Horch 4x4 Type1A Veh. (1)

300035052

€17.99

Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

Military model vehicles 1:35

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

300035213

€17.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.   Warning! Not suitable for children under 14 years.

1:35 Ger. PzKpfw. II Ausf. A/B/C (1)

Military model vehicles 1:35

1:35 Ger. PzKpfw. II Ausf. A/B/C (1)

300035292

€47.99

Article number: 300035292 Product: 1:35 Ger. PzKpfw. II Ausf. A/B/C (1) After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II tanks were manufactured. They led the surprise invasion on Poland and were the main tanks used in the attack on France. Later, they were successfully used in reconnaissance missions until the end of the war. About the Model •1/35 model of the German Panzerkampfwagen II tank. •Supplemental armor plate parts can be installed in the same manner as the actual tank. •Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants. •Assembly-type tracks feature single-piece sections for effortless construction. •Comes with a commander figure and three kinds of markings for the French campaign. •Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield.   Warning! Not suitable for children under 14 years.

1:35 Ger. PzKpfw. III Ausf. L (1)

Military model vehicles 1:35

1:35 Ger. PzKpfw. III Ausf. L (1)

300035215

€43.99

Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included.   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

Military model vehicles 1:35

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

300035203

€39.99

Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included.   Warning! Not suitable for children under 14 years.

1:35 Ger. Sturmtiger 38cm RW61 (1)

Military model vehicles 1:35

1:35 Ger. Sturmtiger 38cm RW61 (1)

300035177

€52.49

Article number: 300035177 Product: 1:35 Ger. Sturmtiger 38cm RW61 (1) In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully reproduced as a plastic assembly model kit. The main hatch on the superstructure can be depicted in either open or closed position, the rocket launcher and escape hatch are moveable even after assembly, the loading crane can also rotate, and the heaviness of the tracks is also realistically depicted. Also included in the set is one figure and four rockets.   Warning! Not suitable for children under 14 years.

1:35 Ger.Flak 8,8 w/Motorcycle (9)

Military model vehicles 1:35

1:35 Ger.Flak 8,8 w/Motorcycle (9)

300035017

€32.99

Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.   Warning! Not suitable for children under 14 years.

1:35 US 2.5to Cargo Truck (1)

Military model vehicles 1:35

1:35 US 2.5to Cargo Truck (1)

300035218

€43.99

Article number: 300035218 Product: 1:35 US 2.5to Cargo Truck (1) During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish. The model depicts the doors which had canvas parts and its cargo area with the covers removed to allow you to recreate a commonly seen scene of WWII. Five kinds of markings and a seated driver figure are included.   Warning! Not suitable for children under 14 years.

1:35 US M113 Arm.Cavalry Assault Veh.(3)

Military model vehicles 1:35

1:35 US M113 Arm.Cavalry Assault Veh.(3)

300035135

€25.99

Article number: 300035135 Product: 1:35 US M113 Arm.Cavalry Assault Veh.(3) With a cupola-cum-gun shield on the M60 machine gun, the M113 ACAV (Armored Cavalry Assault Vehicle) was an improvement on its base, the M113APC (Armored Personnel Carrier). This plastic model assembly kit accurately captures the M113 ACAV, of course including the added cupola/gun shield, and also recreating the crew seats, engine and more in the interior. Three figures in realistic pose are included in the kit.   Warning! Not suitable for children under 14 years.

1:35 US Tank M41 Walker Bulldog (3)

Military model vehicles 1:35

1:35 US Tank M41 Walker Bulldog (3)

300035055

€19.49

Article number: 300035055 Product: 1:35 US Panzer M41 Walker Bulldog (3) This is a 1/35 scale plastic model assembly kit depicting the M41 Walker Bulldog. ★The compact form of the 72mm gun-toting M41 is captured in style. ★From accurate surface textures to depictions of weld lines, there is plenty of detail. ★Comes with decals to depict either a U.S. or a Japan Ground Self Defense Force vehicle. ★Includes a commander figure and two soldiers to add further life to your model.   Warning! Not suitable for children under 14 years.

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

Military model vehicles 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

300035009

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the current standard, these Pzkpfw II look quite inferior both in fire and defensive powers. But when compared with those of other countries active at the time, the Pzkpfw II should be ranked as by far the most superior one. Indeed, its nimble mobility matching well with the German application was the driving force of the spectacular victory won by the Germans at the initial period of the World War II.   Warning! Not suitable for children under 14 years.

1/35 Ger. Panther Ausf.D

Military model vehicles 1:35

1/35 Ger. Panther Ausf.D

300035345

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.   Warning! Not suitable for children under 14 years.

1:35 Brit.Tank Cromwell Mk.IV Cruis.(1)

Military model vehicles 1:35

1:35 Brit.Tank Cromwell Mk.IV Cruis.(1)

300035221

€43.99

Article number: 300035221 Product: 1:35 Brit.Tank Cromwell Mk.IV Cruis.(1) This is a plastic assembly model kit of the Cromwell Mk.IV Cruiser tank, which served alongside the Churchill infantry tank after the Normandy landings in June, 1944. The distinctive riveted armor and turret have been precisely reproduced. The large road wheels, which allowed the Cromwell to move quickly on the battlefield, have also been accurately rendered. Parts are included to depict features which were unique to Normandy: "Normandy cowl" ducts which prevented the exhaust gases from entering the tank and hedgerow cutters, which were attached to the front of the tank to allow it to move through the thick brush. Five kinds of decals and a tank crewman figure are included.   Warning! Not suitable for children under 14 years.

1:35 British Light Utility Car 10HP

Military model vehicles 1:35

1:35 British Light Utility Car 10HP

300035308

€35.49

Article number: 300035308 Product: 1:35 WWII British Light Utility Car 10HP British forces used passenger car chassis, during WWII, as the basis for pick-up style military vehicles. Officially identified as a "Light Utility Car" soldiers called them affectionately by the nickname "Tilly". The vehicle was equipped with a 30hp engine and rear wheel-drive. However, the car did not have sufficient off-road abilities and was soon replaced by 4WD vehicles. As a result, the "Tilly" was used in airbases for liaisons and in other paved areas. The vehicle served in the Dunkirk evacuation, North African and Italian fronts, and Europe from the Normandy invasion on.   Warning! Not suitable for children under 14 years.

1:35 British MBT Chieftain MK.5 (3)

Military model vehicles 1:35

1:35 British MBT Chieftain MK.5 (3)

300035068

€25.99

  Warning! Not suitable for children under 14 years.

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

Military model vehicles 1:35

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

300035035

€7.19

Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right.   Warning! Not suitable for children under 14 years.

1:35 Ger. 38(t) Ausf.E/F (1)

Military model vehicles 1:35

1:35 Ger. 38(t) Ausf.E/F (1)

300035369

€35.99

Article number: 300035369 Product: 1:35 Ger. 38(t) Ausf.E/F (1) A brand new face is welcomed to the 1/35 Military Miniatures Series with the addition of the 38(t)! This subject in fact started life as a light tank developed for Czechoslovakia, but was adopted and renamed 38(t) by German forces after their occupation of the country in 1939. It was equipped with a 3.7cm main gun and could reach speeds of up to 42km/h powered by the 125hp engine. A number of variants were produced, of which the Ausf. E/F 38(t)s were manufactured over a one-year period from November 1940; they featured improved armor and were thrown into the conflict with Soviet forces after the start of Operation Barbarossa. • This is a 1/35 scale plastic model assembly kit. • Tamiya designers studied a real 38(t) in the Kubinka Tank Museum, getting the data to make this highlyaccurate model with detail right down to the rivets. • The turret front left sight moves in conjunction with the 3.7cm gun. • Features a realistic recreation of the suspension with large road wheels and upper return rollers. • Assembly type tracks give natural recreation of the upper run ‘sag.’. They feature single piece straight sections. • The kit comes with a figure recreating a commander for placement in the cupola hatch. • Includes two marking options for vehicles with units on the Eastern Front in 1941.

1:35 Ger. Battle Tank IV F L24/75mm

Military model vehicles 1:35

1:35 Ger. Battle Tank IV F L24/75mm

300035374

€53.99

Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).

1:35 Ger. Floating Car Typ 166 (1)

Military model vehicles 1:35

1:35 Ger. Floating Car Typ 166 (1)

300035224

€18.99

Article number: 300035224 Product: 1:35 Ger. Floating Car Typ 166 (1) This is a plastic assembly model kit of the 4WD Schwimmwagen which earned the trust of German soldiers with excellent performance on bad roads and fording ability. The body with hull-shaped underside has been reproduced via slide molding for a realistic finish and ease of assembly. The windshield is moveable and the screw can be positioned in the down position to allow you to depict a fording scene. Parts to depict the air-cooled four-cylinder engine also included. Interior details such as the flooring & seats, instrument panel, shift lever etc have a rich finish. The folded canvas roof cover also provides the model with great realism. A driver figure is included.   Warning! Not suitable for children under 14 years.

1:35 Ger. Jagdpanzer IV/70 (V) Lang

Military model vehicles 1:35

1:35 Ger. Jagdpanzer IV/70 (V) Lang

300035340

€59.99

Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas.   Warning! Not suitable for children under 14 years.

1:35 Ger. Kingtiger Ardennen Fro. (3)

Military model vehicles 1:35

1:35 Ger. Kingtiger Ardennen Fro. (3)

300035252

€59.99

Article number: 300035252 Product: 1:35 Ger. Kingtiger Ardennen Fro. (3) Development of the massive King Tiger began in February 1943 to counter the increasing threat of Russian Tanks. A more powerful cannon was added, upgrading from the L56, 88mm of the Tiger I to the Type 43 L71, 88mm high velocity gun. The chassis front armor was 150mm thick with 80mm thick side armor. The Henschel and Porsche companies came up with rival turret prototypes. After the trial production of 50 tanks with the Porsche turret, the Henschel design, with its extremely thick armor that measured 185mm on the front and 88mm on the side panels, was adopted for mass production. The Henschel turret itself was revised mid-way through production, from a stepped gun mantle to a smooth one. Due to the havoc wreaked by the King Tiger I during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the King Tiger up until the very last day of the war. As for the DKW NZ350 military motorcycle, production began in 1940. However, this German military motorcycle experienced mid-production changes when resources became limited towards the end of the war. DKW NZ350s at that time were seen with smaller headlights and thinned-out fenders. About the Model ★Tamiya presents a 1/35 scale model of the German King Tiger as it appeared during the final German offensive in the Ardennes Forest of Belgium. ★Total length: 294mm, total width: 108mm. ★>Henschel design turret recreated in superb detail. ★Kit includes parts for two different types of gun mantles- stepped and smooth. ★Turret's rear escape hatch can be opened and closed after assembly. All other hatches can be assembled in the open or closed positions. ★Kit includes DKW NZ350 German Military Motorcycle recreated as it appeared during the latter stages of World War II with smaller headlight and thinned-out fender. ★Three figures included: Tank commander and orderly wearing leather jackets, and tank crewman.   Warning! Not suitable for children under 14 years.

1:35 Ger. Sd.Kfz.2 Kettenkrad (Mid.Pro.)

Military model vehicles 1:35

1:35 Ger. Sd.Kfz.2 Kettenkrad (Mid.Pro.)

300035377

€27.49

1:35 Ger. SdKfz.161/2 Panzer IV J (1)

Military model vehicles 1:35

1:35 Ger. SdKfz.161/2 Panzer IV J (1)

300035181

€47.99

Article number: 300035181 Product: 1:35 Ger. SdKfz.161/2 Panzer IV J (1) For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schürzen" armor additions. Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension. Additionally, the kit features belt type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

Military model vehicles 1:35

1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

300035195

€33.99

Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

1:35 Ger. Sturmgeschütz III B (1) StuG.

Military model vehicles 1:35

1:35 Ger. Sturmgeschütz III B (1) StuG.

300035281

€52.99

Article number: 300035281 Product: 1/35 WWII Ger.Sturmgeschütz III B (1) Germanys versatile Stug III was originally designed as an assault weapon, however also came to be used as a weapon of defense as the war progressed, providing both assault gun and anti-tank support. Based on the durable Panzer III chassis, the Stug III featured a monoblock structure with an L24 75mm short barreled gun mounted directly to the hull, eliminating the revolving turret and reducing overall height. The Ausf. B was the first truly mass produced Stug III with 250 produced from June 1940. Featuring wide tracks and powered by a 230hp Maybach HL 120 TRM engine the Ausf. B boasted a top speed of 40km/h. The Ausf. B saw action during the Balkans campaign in April 1941 and Operation Barbarossa in June, 1941. The simple construction leading to low costs and easy mass production made the Stug III one of Germanys most produced armored vehicles with over 10,000 produced during WWII.

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

Military model vehicles 1:35

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

300035295

€82.99

Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included.   Warning! Not suitable for children under 14 years.

1:35 M1A1 Abrams Ukraine

Military model vehicles 1:35

1:35 M1A1 Abrams Ukraine

300025216

€35.99

Assembly model kit 1/35th scale, Special Version of the Tamiya kit 35156, new painting guide

1:35 U.S. M1A2 SEP Abrams TUSK II

Military model vehicles 1:35

1:35 U.S. M1A2 SEP Abrams TUSK II

300035326

€83.99

Article number: 300035326 Product: 1:35 U.S. M1A2 SEP Abrams TUSK II During the 2003 Invasion of Iraq, the U.S. deployed its latest M1A2 Abrams main battle tanks and these continued to be used in Iraq during the subsequent occupation period. Due to the threats posed by RPGs and improvised explosive devices (IEDs) in the urban environments, the tanks were upgraded with more protection in the form of Tank Urban Survival Kits (TUSK I) in 2004. The upgrade included features such as reactive armor on the hull sides, hull underside armor to protect against land mines, an M2 machine gun mounted above the main gun barrel, infrared cameras for the crew, and an external telephone for communication with accompanying infantry. A further development called TUSK II added features such as tile-shaped reactive armor to the turret and hull sides, armored shield for the commander, and a rear-view camera. These kits could be installed in field depots in about 12 hours and different tanks had different features equipped. About the Model • 1/35 scale plastic assembly model kit of the latest M1A2 SEP Abrams. • Includes parts to depict both TUSK I and TUSK II features. • Detailed parts such as the armored shields for the commander and loader and barrel-mounted M2 machine gun are included. • Intricate curves of the reactive armor tiles are accurately reproduced. • Comes with one commander and one loader figure, both depicted with body armor. • Two marking options for TUSK I and one marking option for TUSK II-equipped tanks included.   Warning! Not suitable for children under 14 years.

1:35 US M113A2 Personal Carr. Desert (2)

Military model vehicles 1:35

1:35 US M113A2 Personal Carr. Desert (2)

300035265

€41.99

Article number: 300035265 Product: 1:35 US M113A2 Personal Carr. Desert (2) About the U.S. M113A2 Armored Personnel Carrier Desert Version Of the various M113 type personnel carriers developed, the M113A2 began production in June 1979. Based on combat experience in Vietnam, this version was made with improved transmission, operating equipment and cooling system as well as reinforced suspension. Detachable fuel tanks were moved to the rear and external sides of the vehicle, smoke dischargers were mounted on the front, and the trim vane was enlarged. M113A2 units were deployed to the Gulf War in 1991, and in the 2003 Iraq War. M113A2s active in Iraq were also equipped with Combat Identification Panels (CIP), the latest friend and foe recognition device to prevent friendly attack. About the Model ★Overall length 153mm ★Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. ★CIP attached on both sides. ★Gun shield can be attached to M2 machine gun. ★Plenty of extra attachments including personnel equipment and ammo cases. ★Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina.   Warning! Not suitable for children under 14 years.

1:35 US M18 Hellcat Tank Destroyer

Military model vehicles 1:35

1:35 US M18 Hellcat Tank Destroyer

300035376

€48.99

1:35 US M551 Sheridan (Vietnam)

Military model vehicles 1:35

1:35 US M551 Sheridan (Vietnam)

300035365

€59.99

Article number: 300035365 Product: 1:35 US M551 Sheridan (Vietnam) Vietnam Campaigner The lightweight M551 Sheridan was designed as an airliftable tank, a cutting-edge design with aluminum alloy hull and powerful 152mm gun/launcher. Work began on it in 1959, and it was officially adopted in May 1966, with 1,600 produced by November 1970. Its first taste of live action came in the Vietnam War, fulfilling both shelling and offensive roles in a punishing environment, and it would also go on to serve in the Gulf War conflict. Experience taught valuable lessons on the use of the Sheridan, and led to reinforced armor to combat land mines, while some were given a wire netting RPG screen for protection from anti-tank rockets, and even the large gun shield from the M113 ACAV. About the Model ★This is a 1/35 scale plastic model assembly kit of the M551 Sheridan. Length: 185mm, width: 80mm. ★A highly accurate rendering of the powerful form with 152mm gun/launcher based on extensive research of the actual Sheridan. ★Authentically captures a Vietnam War vehicle, with optional chain link anti-RPG net and gun shield. ★Choose open or closed rotating driver's hatch. ★Assembly type tracks feature one-piece straight sections. ★Nylon mesh is included to recreate anti-RPG net and engine grille mesh. ★Clear parts recreate periscope components. ★Comes with commander and loader figures, plus torso driver figure. ★2 Vietnam War marking options are included.

1:35 US MBT M1A1 Abrams (2)

Military model vehicles 1:35

1:35 US MBT M1A1 Abrams (2)

300035156

€42.99

Article number: 300035156 Product: 1:35 US MBT M1A1 Abrams (2) This is a 1/35 scale plastic assembly kit model of the U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine. The massive, dynamic form of the tank has been realistically reproduced. Details such as engine grille and welded sections on armor plates have a rich finish. The model features 12.7mm and 7.62mm guns as well as smoke dischargers. Nylon mesh to depict the rear rack is included to enhance realism. In addition, a commander and a loader figures are also included in kit.   Warning! Not suitable for children under 14 years.

1:35 US MBT M1A2 Abrams Iraqi Freedom(2)

Military model vehicles 1:35

1:35 US MBT M1A2 Abrams Iraqi Freedom(2)

300035269

€56.99

Article number: 300035269 Product: 1/35 US MBT M1A2 Abrams Iraqi Freedom(2) U.S. M1A2 Abrams 120mm Gun Main Battle Tank The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block. About the M1A2 Abrams The M1 Abrams, officially commissioned by the US military in 1980, was designed totally different from previous post-WWII US military tanks. Although fitted with the same 105mm cannon as the M60, the M1 was powered by a gas turbine engine and was fitted with spaced armor. Planned to be commissioned by the US military over a long period, the M1 was designed with future reforms in mind. In 1984, the M1A1 was developed with a 120mm smooth bore cannon, and a further variant the M1A1HA was later developed featuring depleted uranium armor. This then led to the M1A2, which was fitted with Intervehicular Information System (IVIS), Commander's Independent Thermal Viewer (CITV) turret and new style vision block. The M1A1HA and the M1A2 both played significant roles in Operation Iraqi Freedom, being deployed by land forces as well as the Marine Corps as they moved toward Baghdad. Model kit, Scale 1:35, Vehicle, 3 Figures, Manual, Decal, Length 283 mm.

1:35 US Willys Jeep MB 4x4 (1)

Military model vehicles 1:35

1:35 US Willys Jeep MB 4x4 (1)

300035219

€21.49

Article number: 300035219 Product: 1:35 US Willys Jeep MB 4x4 (1) Without a doubt the Jeep Willys MB occupies a significant position in the whole automotive history. The origin of the Jeep vehicle dates back to early 1941, when U.S. Forces ordered the Willys, Ford, and Bantam companies to develop prototypes of a small sized multi-purpose 4-wheel drive vehicle. During the early stage of WW2, Germany had achieved outstanding successes by using motorized troops with their "Blitzkrieg" tactics. It became a pressing need for allied nations to possess tough and reliable vehicles with excellent cross-country ability. In November 1941, the Army, with alterations on the front grille and hood to the Ford design, chose the Willy"s vehicle as the basis for the mass production model. This marked the birth of the Willys MB (Model B) that provided unmatched ability to transport Allied troops during the conflict. The early Willys MB had a welded, slat type front grille. Due to the necessity of increasing production, the Army ordered Ford to join the mass production using the Willys MB"s blueprints. It was designated the GPW, and a simple, pressed steelfront grille was introduced. During WW2, the Willys MB and Ford GPW ran over every battlefield. As a means of transit for soldiers, it played an important role in bringing the Allied victory. It was also used for liason, command, communication and sometimes even as an ambulance for a light firearms carrier. Production reached approximately 640,000 units by August 1945.   Warning! Not suitable for children under 14 years.

1:35 WWII British S.A.S Jeep (2)

Military model vehicles 1:35

1:35 WWII British S.A.S Jeep (2)

300035033

€13.49

  Warning! Not suitable for children under 14 years.

1:35 WWII Dt. Panzerjäger Nashorn (4)

Military model vehicles 1:35

1:35 WWII Dt. Panzerjäger Nashorn (4)

300035335

€70.99

Article number: 300035335 Product: 1:35 WWII Dt. Panzerjäger Nashorn (4) This is a highly detailed model of the WWII German tank destroyer Nashorn. The full size vehicle featured an 8.8cm gun also known as a PAK 43 and it was fitted to the upper surface of a light turret less chassis. Even though the vehicle was lightly armored, the PAK43 weapon was capable of penetrating 190mm of armor at 1,000 meters. The Nashorn saw action with German heavy antitank battalions fighting Soviet and Allied forces during much of the conflict. Due to its relatively low cost and superior mobility compared to heavier tanks it remained in production until the end of the WWII war. Decals included. Features: • The model accurately recreates the powerful form of the Nashorn, thanks to detailed research performed using an actual example of the vehicle in a museum in Russia. • Features faithful reproductions of the 71-caliber 8.8cm gun and complex fighting compartment. • Metal parts are used to ensure that the gun has authentic movement and weight. • Comes with 3 marking options, including winter and Eastern front versions. • 4 included figures depict driver and 3 crew members in a variety of realistic poses.   Warning! Not suitable for children under 14 years.

1:35 WWII Ger. Cargo Truck 3to (2)

Military model vehicles 1:35

1:35 WWII Ger. Cargo Truck 3to (2)

300035291

€44.49

Article number: 300035291 Product: 1:35 WWII Ger. Cargo Truck 3to (2) About the 3Ton 4x2 Cargo Truck The German army in WWII used a wide variety of wheeled vehicles as part of their overall strategy of fast mechanized warfare. Among the most widely used was the 3Ton 4x2 Cargo Truck, a truck design that was first produced in the 1930s. Featuring a dependable 6-cylinder gasoline engine,the 3Ton 4x2 Cargo Truck could take on a very large payload disproportionate to its size. They proved to be not only extremely reliable, but also very versatile, and were employed in a wide variety of roles, including fuel truck, ambulance, radio truck, as well as general-purpose cargo truck. About the Model •High-quality 1/35 scale assembly model kit of the 3Ton 4x2 Cargo Truck. •This kit is an all-new molding, and is much more accurate than kits current on the market. •The actual trucks chassis had a forward slant (designed to balance the cargos weight), and this unique feature has been accurately reproduced. •Suspension features a reasonable number of parts for easy assembly without sacrificing detail.- Driver and navigator figures included. •Accessory set of fuel drums and jerry cans also included for a full cargo load. •Comes with 4 types of markings, including both German army and Luftwaffe units. •To aid with painting, window masks will be included for the first time in a military model. •The actual truck served from the 1930s to the end of the war on all battle fronts, so this model can be displayed together with a wide range of other Tamiya 1/35 scale vehicles and figures such as Sturmgeschutz III Ausf. B and King Tiger. Model kit, Scale 1:35, Vehicle, 2 Figures, Manual, Decal, Length 174 mm.   Warning! Not suitable for children under 14 years.

1:35 WWII Ger.SdKfz.171 Panther A (2)

Military model vehicles 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

300035065

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank   Warning! Not suitable for children under 14 years.

1:35 WWII SdKfz.223 Light Arm.Vehicle(2)

Military model vehicles 1:35

1:35 WWII SdKfz.223 Light Arm.Vehicle(2)

300035268

€25.99

Article number: 300035268 Product: 1/35 WWII SdKfz.223 Light Arm.Vehicle(2) Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Photo- etched parts, Length 140 mm.   Warning! Not suitable for children under 14 years.

U.S. M4A3E2 Jumbo

Military model vehicles 1:35

U.S. M4A3E2 Jumbo

300035139

€35.99

1/35 Brummbaer Late Production

Military model vehicles 1:35

1/35 Brummbaer Late Production

300035353

€56.99

Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia.   Warning! Not suitable for children under 14 years.

60 of 139 Items