Nouveautés
Buggys RC (2WD/4WD)
1:10 RC Hotshot II (2024) 4WD
300058737€230.00
Article number: 300058737 Product: 1:10 RC Hotshot II (2024) 4WD Tamiya welcomes a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987, following Tamiya’s first 4WD buggy Item 58047 Hotshot released in 1985 and Item 58054 Supershot released in 1986. The Hotshot II was a lightweight design thanks to its use of plastic parts. Why not get this nostalgic buggy kit in addition to Item 58695 1/10 R/C Wild One Off-Roader Blockhead Motors? Including ESC. 4WD assembly kit, Vintage Model, ESC included, Type 540 Motor, pre-painted Polycarbonat-body, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Véhicules pour route / Onroad RC (2WD/4WD)
Mitsubishi Pajero (CW-01)
300058727€160.00
Article number: 300058727 Product: 1:10 RC Mitsubishi Pajero CW-01 Tamiya is proud to release the 1/10 R/C Mitsubishi Pajero on the CW-01 chassis. After the announcement of its concept car at the Tokyo Motor Show in 1973, the Mitsubishi Pajero was one of the most recognizable Mitsubishi 4WD cars, sold from 1982 to 2021 through a fourth model change. At the 1983 Paris-Dakar Rally, this car took a championship in an unmodified production vehicle division, and after that, showed off its great performance around the world. This kit recreates the first generation model which was produced from 1982 to 1990. Based upon Item 58499 1/10 R/C Mitsubishi Montero Wheelie, tires are changed from massive 115mm big ones to rock block ones, and the kit features the CVA II short oil dampers. 2WD assembly kit, CW-01 Chassis, ESC included, Type 540 Motor, ABS Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Maquettes de motos 1/12
1:12 Ducati Superleggera V4
300014140€55.99
Article number: 300014140 Product: 1:12 Ducati Superleggera V4 Tamiya is proud to announce the release of the Superleggera V4 as a new addition to our 1/12 Motorcycle Series. The Superleggera V4 is a road-legal version of the Panigale V4 produced by the legendary Italian motorcycle manufacturer, Ducati. This motorcycle’s cornerstone is the lightening facilitated by carbon fiber material in the fairings, chassis and swing arm, and its eye-catching design features the distinctive carbon fiber biplane wings on either side of the front cowl for aerodynamics. The engine is the Desmosedici Stradale R, a 998cc V4 powerplant with Ducati’s Desmodromic valve timing system. This motorcycle also uses Öhlins suspension and Brembo brake system. In addition, installation of the Akrapovič titanium muffler – which is for the racing kit – with a dedicated engine part results in a superb power/weight ratio of 1.54hp/kg. Do not miss this great chance to get our assembly kit model of this rare super-bike; only 500 of the full-size motorcycle were produced. Kit model, scale 1:12, Street Version, engine, frame, fairing, racing motorcycle stand, semi-slick tires, exhaust system, instructions, decal, Length 176mm. Warning! Not suitable for children under 14 years.
Accessoires supplémentaires
Rein. Output Shaft Set
300056538€23.49
Article number: 300056538 Product: 1:14 Rein. Output Shaft Set (1) This item contains a reinforced version of the Gear Shaft B used in 1/14 R/C Tamiya tractor truck model kits. The reinforced material is resistant to wear and distortion, improving power transmission, while also reducing backlash and protecting the gears. •Reinforced Output Shaft x1 •Small parts for attachment are included. •Compatible with Tamiya 1/14 Scale R/C Tractor Truck Series models. Warning! Not suitable for children under 14 years.
Véhicules pour route / Onroad RC (2WD/4WD)
TT-02R Chassis Kit
300047326€175.00
Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Included: 4WD assembly Kit, TT-02 Chassis, R Version with Tuning Parts, fully ball bearings, blue anodized parts WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Bundle - 18 %
Véhicules tout-terrain / Offroad RC
Tamiya VW Golf Bundle
BDL-300058714€207.49
Product bundle consisting of: 1:10 RC Golf MK2 GTI 16 Rally MF-01X / 1:10 wheel set classic design (4) bl.chr Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Warning! Not suitable for children under 14 years.
Bundle - 28 %
Véhicules pour route / Onroad RC (2WD/4WD)
Tamiya Toyota Chassis Bundle
BDL-300051622€221.99
Product bundle consisting of: 1:10 RC TT-02R Chassis Kit / GR SUPRA Body Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Article number: 300051622 Product: GR SUPRA Body Tamiya is delighted to announce that the body parts for the cutting-edge TOYOTA GR Supra are to be sold as an individual item. Set Contents/Information • The powerful, alluring body is molded accurately in lightweight and durable polycarbonate, with separate light cases front and rear. • Features separate molded parts for side mirrors. • Marking stickers, plus masking stickers for use when painting are included. • Compatible with 257mm wheelbase touring car chassis. Warning! Not suitable for children under 14 years.
Bundle - 31 %
Véhicules pour route / Onroad RC (2WD/4WD)
Tamiya Toyota Celica Bundle
BDL-300047491€290.00
Product bundle consisting of: 1:10 RC Toyota Celica GT-Four TT-02 pain / RC-Reflex Pro 3 Electric Set Article number: 300047491 Product: 1:10 RC Toyota Celica GT-Four TT-02 pain Tamiya welcomes this limited edition version of Item 58718 Toyota Celica GT-Four (ST165) (TT-02) with pre-painted, pre-cut body, pre-cut wheel arches, and pre-made body mount holes, which is great for not only beginners but also veterans. Article number: 500500091 Product: RC-Reflex Pro 3 Electric Set Optimum extension set for ARR and Assembly Kit. Especially for Cars & Boats. Recommended Accessories: Receiver ReflexWheel 3 N° 500501533 Receiver ReflexWheel 3 waterresistant N° 500501534 Receiver ReflexWheel 3 BEC N° 500501535 Receiver ReflexWheel 3 BEC/waterresistant N° 500501536 Servo CS-6, 60 Ncm N° 500502036 Servo CS-9, 98 Ncm N° 500502024 Technical data: Transmitter / receiver • Operating Voltage of transmitter 4,8 up to 6 V • two continuously controllable fully proportional channels • servo reverse for both channels (reversal of the running direction) • trimming function for accelerator and steering • Dual Rate for both channels (path limitation of the servos) • powering of receiver (without BEC) 11 V possible • Integrated Fail-Safe • plug system for Futaba and Graupner-J/R • charging socket (plus terminal inside) • battery status indicator by LED Charger • Input voltage: 100-240 V, 50-60 Hz (AC) • Charging current output 1: max. 2 A / 9 V • Charging current output 2: max. 0.5 A / 6 V • Battery types: NiMH Steering Servo • JR Plug • 6 kg throw force • Metal gear Driving battery • NiMH 7.2 V / 3000 mAh TAMIYA plug Transmitter battery NiMH Mignon 1.2 V / 2100 mAh Warning! Not suitable for children under 14 years.
Véhicules pour route / Onroad RC (2WD/4WD)
2003 Focus RS Custom (TT-02)
300058724€150.00
Article number: 300058724 Product: 2003 Focus RS Custom (TT-02) Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.