Model colours/paints/airbrush

Name: AS-33 Camouflage Gray, paint spray, 100 ml
Brand: Tamiya
SKU: 300086533
Price: 12.99 EUR
Availability: InStock

Tamiya adds vibrant colour to model making with its premium paints, varnishes, and airbrush products. Click here for a clear and concise overview of the essential information and to explore more about our model making paints!

Sort by:

Top sellers

Top sellers
New
Price ascending
Price descending

Filter

AS spray colours

AS-33 Camouflage Gray, paint spray, 100 ml

300086533

€12.99

AS-33 Camouflage Gray is a 100 ml paint spray made for model finishing where an even, consistent coat matters across larger surfaces. The spray application helps lay down colour smoothly on broad panels and shaped parts, giving camouflage gray coverage that reads cleanly across the whole build. The 100 ml can size provides a practical amount for workshop use when several parts need the same tone. Spray paint is especially useful on shells, body sections and other exterior components where brush marks would interrupt the final look. Camouflage Gray fits military-inspired colour layouts and other subdued paint schemes that call for a restrained gray tone rather than a bright accent. The aerosol format also supports steady passes over curved contours, corners and recessed areas, which helps keep the finish visually consistent from one section to the next. On the bench, AS-33 Camouflage Gray suits fresh builds, repaint work and replacement parts that need to match an existing scheme. It can be used when a model calls for a single gray base coat or when several painted sections need the same colour family to tie the finished appearance together. Warning! Not suitable for children under 14 years.

Brushes & accessories

Blunt Brush S, modeling brush for detail painting

300087029

€2.69

Blunt Brush S is a modeling brush shaped for precise paint application on small parts, fine edges and narrow details. The slim bristle tip and light wooden handle create a direct, steady feel at the bench, whether working on trim lines, cockpit details, figure accents or careful touch-ups on miniature surfaces. The brush is presented as a single fine-detail tool rather than a broad coverage brush, which makes it suited to controlled paint pickup and measured strokes. The handle marking identifies it as TAMIYA MODELING BRUSH 000, a format commonly chosen for very small painted areas where larger brushes can flood recesses or soften sharp borders. Its blunt brush designation adds another point of distinction within a hobby setup built around different brush shapes for base coating, lining and finishing. On a model-making table, this brush fits the moments that call for patience and accuracy: picking out raised details, refining painted borders and adding small color notes after the main coat has dried. It also works well as a dedicated brush kept aside for delicate corrections, helping maintain cleaner separation between tiny painted sections. Warning! Not suitable for children under 14 years.

Polish, cleaners, aging materials

Chipping Liquid 40ml, finishing material bottle

300087225

€6.49

Chipping Liquid 40 ml is a finishing material for plastic models that creates realistic weathering by letting the top paint layer lift away in controlled areas. Applied between a lacquer base color and an acrylic overpaint layer, the water-based formula helps recreate chipped edges, worn panels and damaged paint surfaces that suit military subjects and other heavily used vehicle finishes. The process is specific and hands-on. A thin coat of the liquid is applied by airbrush or brush over the dried base color, then covered with the hull color. Water is added only where paint wear is wanted; this softens the layer so the top color can be peeled away with a toothpick or similar tool. Used carefully, that sequence makes it possible to place scratches and chips where traffic, contact or exposed edges would naturally wear through. Used tools can be washed with water after the session. The 40 ml square bottle fits neatly on the workbench for detail-focused finishing sessions and small batch paint work. This material is oriented toward advanced modelers and works best when the paint sequence is followed closely, as the top color does not peel after it has fully dried. Brushes are not included. Warning! Not suitable for children under 14 years.

Brushes & accessories

Flat Brush No. 0, modeling brush, 4 mm

300087015

€2.19

Flat Brush No. 0 brings a narrow 4 mm painting edge to model and hobby work where clean borders and controlled coverage matter. The flat horse-hair bristles pick up paint across a straight edge, making it easier to guide color onto trim lines, compact panels and other small sections that benefit from an even pass. The short square-cut bristle shape creates a defined contact line, while the metal ferrule holds that profile firmly between handle and brush head. A wooden handle is designed to reduce strain on the hand, which helps keep movements steadier through longer painting sessions and repeated touch-up work. This combination of flat tip, No. 0 size and 4 mm width gives the brush a focused role in a painting setup alongside broader brushes and finer pointed tools. On a workbench, the brush suits edging, filling small rectangular areas and laying down smooth coats on model parts that need more coverage than a fine point can provide. It also fits careful finishing passes where a straight bristle edge helps keep paint placement tidy around molded details and panel boundaries. Warning! Not suitable for children under 14 years.

Brushes & accessories

Flat Brush No. 01, modeling brush, slim tip

300087028

€1.99

Flat Brush No. 01 is a slim modeling brush built for careful paint application on small surfaces and sharply defined edges. The narrow flat bristle shape gives each stroke a clear contact line, which helps when covering compact sections that need more direction than a round tip can provide. The brush combines a light wooden handle, a silver metal ferrule and a small brown bristle head in a straightforward format suited to hobby bench work. Its flat profile lends itself to edging, short pull strokes and controlled coverage across narrow panels or trim areas. The slim head also makes it easier to place paint into tight sections while keeping the stroke width consistent. For model makers working on fine brushwork, that shape supports neat transitions between painted areas and more deliberate handling around corners and borders. On a workbench, Flat Brush No. 01 fits detail painting sessions where small parts, edge lines or compact surfaces need a measured amount of paint. It also works well as a dedicated brush for touch-ups and careful finishing passes on model projects where a broader head would be less exact. Warning! Not suitable for children under 14 years.

Brushes & accessories

Flat Brush No. 5, modeling brush, flat bristles

300087013

€3.19

Flat Brush No. 5 is a modeling brush built for broader painted areas that still need a clean, controlled edge. The flat bristle shape lays paint down in straight passes, which helps when covering body panels, aircraft wings or other larger model surfaces with a more even finish. The brush combines a light wooden handle with a silver-coloured metal ferrule and short, light-coloured bristles. That construction gives a familiar balance for hobby bench work and keeps the working end compact enough for guided strokes along edges, corners and raised details. The No. 5 size sits between very fine detailing tools and wider coverage brushes, making it a practical choice when a project moves from small accents to larger painted sections. It can also be used for controlled application of weathering materials or similar finishing media where a flat edge helps place material in a measured band. On the workbench, this brush fits naturally into model painting sessions that alternate between coverage and control. It suits plastic model kits, scale vehicles, aircraft, figures and scenery pieces where broad areas, trim lines and surface finishing often appear in the same build. For hobby painting routines that rely on clean edges and repeatable strokes, the flat profile gives a clear, predictable contact area on each pass. Warning! Not suitable for children under 14 years.

Brushes & accessories

HG II Flat Brush Medium, modeling brush, flat tip

300087215

€10.79

The HG II Flat Brush Medium brings a broad, even painting edge to model work, with very fine PBT resin bristles shaped into a flat tip for smooth, soft brushstrokes. On body panels, interior parts and other flat sections, the medium width helps spread paint in a controlled band while keeping the stroke neat along edges. The brush combines white synthetic bristles, a metal ferrule and a long black handle with a squared end cap. Laser-engraved handle text identifies the HG II series and the medium size, with the size marking shown in Japanese. The handle material is solvent-resistant, a practical detail for sessions that involve hobby paints and common modeling solvents. At the end of the grip, a stopper helps keep the brush from rolling across the work surface and reduces the chance of the bristle tip being knocked out of shape. If that stopper is not needed, it can be cut off with side cutters. This flat brush suits coverage work that needs a cleaner edge than a round tip can provide, such as painting trim, raised details, larger flat areas or straight sections on scale models. It also fits bench setups where the brush is set down repeatedly between coats, washes or touch-up passes.

Brushes & accessories

HG II Rounded Flat Brush Small, modeling brush

300087224

€9.99

The HG II Rounded Flat Brush Small brings a compact rounded flat profile together with very fine PBT resin bristles for precise paint application on model parts and other detailed hobby surfaces. Its small tip helps place colour cleanly along edges, into tight sections and across narrow panels where controlled coverage matters. The bristles have a slightly stiff feel, which supports steady stroke control while keeping the brush responsive in close work. A metal ferrule secures the bristle head to the handle, and the black solvent-resistant grip is shaped for comfortable handling during repeated painting passes. Laser-engraved markings on the handle identify the brush as TAMIYA MODELING BRUSH HG II and show the size in Japanese. At the end of the grip, a small tab helps stop the brush from rolling across the bench and lowers the chance of the bristle tip touching the work surface. This brush suits detail painting on scale models, miniatures and other small-format hobby projects where crisp edges and measured paint pickup are more useful than a wide stroke. The end tab can be removed with side cutters when a smooth handle end is preferred for storage or handling.

Brushes & accessories

HG II Rounded Flat Brush XS, modeling brush, PBT

300087223

€9.99

The HG II Rounded Flat Brush XS is built for controlled detail painting, pairing a very fine rounded flat tip with PBT resin bristles that carry paint neatly into small areas. The slightly stiff bristle feel supports crisp placement on narrow edges, tiny parts and close finishing work, where a broader brush can leave too much paint behind. Its handle is made from solvent-resistant material suited to regular bench use with modeling paints and related liquids. A metal ferrule secures the bristle head, and the grip carries laser-engraved HG II series text plus the size marking in Japanese, so the brush can be identified quickly among other tools. At the end of the handle, a small tab helps keep the brush from rolling across the table and lowers the chance of the tip touching the work surface; the tab can be removed with side cutters when a smooth end is preferred. On model kits, miniatures and painted accessories, the XS shape suits careful touch-ups, fine borders and compact color areas that need a steady hand and a clean edge. It also fits finishing sessions where several brush sizes are laid out together and quick size recognition keeps the painting flow focused.

Brushes & accessories

High Finish Flat Brush Nr. 0, hobby paintbrush

300087046

€5.79

The High Finish Flat Brush Nr. 0 is a slim hobby paintbrush built for careful, small-scale brushwork. Its narrow flat bristle shape supports crisp paint placement on edges, trim sections and compact surface areas, while the long black handle gives a balanced hold during slow, deliberate strokes. A silver metal ferrule secures the short orange bristles and keeps the working end compact, which helps when paint needs to stay within tight boundaries on model parts or craft details. The flat profile is useful for drawing straight passes across narrow sections, laying down thin coats and refining painted areas after broader coverage has been applied. In a painting setup with jars, palettes and small components on the table, the Nr. 0 size fits the moments that call for accuracy rather than wide coverage. This brush works well alongside detail painting, touch-up steps and finishing passes where a clean edge matters. On scale builds, diorama elements or craft pieces with small painted sections, the narrow head supports measured application and a tidy result. Warning! Not suitable for children under 14 years.

Brushes & accessories

High Finish Flat Brush Nr. 02, hobby paintbrush

300087045

€5.79

The High Finish Flat Brush Nr. 02 is a precision hobby paintbrush made for careful work on scale models, miniatures and other small painted parts. Its narrow flat tip supports clean paint placement on edges, trim sections and compact surfaces where a larger brush can leave too much paint at once. The brush combines a long black handle, a silver metal ferrule and a small orange bristle head in a layout built for controlled hand movement. The flat profile helps guide short, even strokes across raised details and straight borders, while the slim head reaches confined areas that need a tidy finish. This makes the brush useful for touch-up work, thin coats and small decorative accents where brush width matters as much as paint quantity. The compact head also helps separate neighbouring painted sections when different colours meet on the same part. On the workbench, the brush suits careful finishing passes on body details, cockpit parts, figures, accessories and miniature scenery. It also fits paint correction tasks after masking removal or detail picking on corners and panel edges, where measured brush contact helps keep surrounding areas clean. Warning! Not suitable for children under 14 years.

Brushes & accessories

High Finish Flat Brush Nr. 2, hobby paintbrush

300087047

€6.79

The High Finish Flat Brush Nr. 2 is a slim hobby paintbrush built for controlled, detail-focused painting. Its flat angled bristle tip creates a clear working edge, making it easier to place paint neatly along borders, corners and small surface sections while keeping strokes deliberate and even. The long black handle and silver metal ferrule give the brush a narrow profile that stays easy to guide in close work. That shape supports careful paint application on model parts, craft details and other small areas where a broader brush would cover too much at once. The angled tip also helps when shifting between edging and filling, so one brush can handle crisp lines as well as short, measured passes across compact surfaces. On the workbench, the Nr. 2 size fits painting sessions that call for accuracy rather than broad coverage. It suits touch-ups, trim work and controlled colour placement on smaller sections, where a steady edge and a slim handle help keep the brush tip in view throughout each stroke. Warning! Not suitable for children under 14 years.

Brushes & accessories

High Finish Pointed Brush, fine hobby brush

300087049

€5.79

The High Finish Pointed Brush, fine is built for detail painting where a very small tip and careful control matter most. Its pointed bristle shape places paint into narrow areas, fine lines and small accents with a more exact touch than a broader brush, making it well suited to miniature finishing, touch-up work and close visual detailing. The long black handle gives the brush a slim, balanced form that sits comfortably in the hand during short, deliberate strokes. A silver metal ferrule connects handle and bristles, helping the fine tip keep its defined shape while working around edges, recesses and other compact painted sections. The clean, minimal layout of the brush also makes it easy to position close to the surface when accuracy matters more than coverage. On a workbench, this brush fits the stages of a paint job that call for restraint rather than speed: picking out trim, refining borders, adding small highlights or correcting tiny areas after a broader coat has dried. It also suits careful craft and hobby tasks where a narrow pointed brush is the right tool for measured paint application. Warning! Not suitable for children under 14 years.

Brushes & accessories

High Finish Pointed Brush, hobby brush, ultra fine

300087048

€6.19

The High Finish Pointed Brush in ultra fine format is built for detail painting where a clean tip and controlled movement matter most. Its narrow pointed bristle shape supports careful paint placement on small features, whether the task is tracing a fine line, refining a painted edge or adding colour to compact recessed areas. The brush combines a long black handle with a silver metal ferrule and a very slim working tip. That layout keeps the grip clear of the painted surface during close work and helps guide short, deliberate strokes in confined spaces. On scale models, the ultra fine point is suited to cockpit details, trim lines, small fittings and other areas where a broader brush would spread paint too widely. It also fits touch-up work after masking, careful accent painting and other finishing steps that depend on a sharply defined point. Beyond model painting, the brush also suits arts and crafts tasks that call for a narrow tip and measured paint flow. It works well at a desk or hobby bench where detail, correction and neat edge work take priority over fast coverage, giving precise control for small-scale painting sessions. Warning! Not suitable for children under 14 years.

Brushes & accessories

High Finish Pointed Brush, small hobby brush

300087050

€5.79

The High Finish Pointed Brush, small is a fine hobby brush built for detail painting where a narrow tip and careful control matter most. Its pointed bristles support accurate paint placement on small parts, panel lines and tight edges, while the slim black handle and silver ferrule give the brush a clean, balanced working form for close hand movements. This small version suits tasks that call for measured paint pickup rather than broad coverage. The long handle helps guide short, deliberate strokes, and the pointed profile makes it easier to reach recessed areas or trace narrow borders with less spill into surrounding sections. The brush shape also supports touch-up work on painted assemblies, figure details and other miniature surfaces where a broader head would cover too much at once. On the workbench, this brush fits neatly into focused finishing steps such as edging, accent painting and refining small visual elements after base colours are in place. It also works well for careful line work on hobby and model projects that need a crisp, controlled tip instead of a wide brush face. Warning! Not suitable for children under 14 years.

Lacquer colours

LP-84 Camouflage Gray, lacquer paint, 10 ml

300082184

€3.59

LP-84 Camouflage Gray brings a defined lacquer colour to scale modelling work, with a 10 ml content size that fits neatly into regular bench routines for brush application, detail correction or controlled paint mixing. The HGV designation identifies the shade as a military-style grey suited to projects that call for a restrained, technical finish rather than a bright accent tone. Within a paint rack, LP-84 adds a dedicated grey reference that can be kept separate from broader neutral shades when a build calls for camouflage-led colour planning. The jar size supports measured use on smaller assemblies, selected panels and finishing passes where colour control matters more than bulk volume. As a lacquer paint, it belongs in modelling workflows built around surface preparation, layered colour application and precise tonal matching. The clearly named shade also helps when returning to an unfinished build and matching the same colour again. On the workbench, LP-84 Camouflage Gray fits naturally into armour, transport and utility vehicle painting sessions, as well as detail jobs on accessories and exterior parts. The 10 ml quantity is easy to set alongside other paints during focused finishing work, whether the goal is a single correction, a matched repaint or a planned camouflage scheme. Warning! Not suitable for children under 14 years.

Lacquer colours

LP-85 Medium Air Gray, lacquer paint, 10 ml

300082185

€3.59

LP-85 Medium Air Gray is a lacquer paint in a 10 ml bottle, made for model finishing where a controlled gray tone matters on small surfaces, trim sections and technical details. The Medium Air Gray shade lends itself to aircraft-inspired schemes, military subjects and other scale builds that call for a restrained, neutral finish rather than a bright accent color. This paint is identified in the LP range as LP-85 and is supplied as a brush paint. The compact bottle size keeps a dedicated shade close at hand for repeat touch-ups, panel work and color matching across separate assemblies. For hobby benches with several ongoing builds, a single 10 ml bottle is easy to store alongside other finishing supplies while still covering the focused areas where exact shade placement counts most. The paint is classified as flammable and carries hazard labeling for careful handling. On the bench, LP-85 suits detail passes on body sections, interior parts, equipment pieces and other model components where a medium gray finish helps define contrast between neighboring colors. It also works well when a build calls for a consistent gray across multiple sessions, keeping the same tone available for corrections, additions and later refinements. Warning! Not suitable for children under 14 years.

Brushes & accessories

Modeling Brush Basic Set, brush set

300087066

€6.69

The Modeling Brush Basic Set brings 3 essential brush shapes together for model painting, giving a clear starting point for base coats, smaller sections and fine detail work at the bench. With Flat Brush No. 3, Flat Brush No. 1 and a small pointed brush in one set, the selection covers broad strokes, controlled edge work and precise paint placement on compact parts. The wider flat brush suits larger painted areas where even coverage matters, while the smaller flat brush helps guide colour along tighter sections and defined edges. The pointed brush is shaped for narrow lines, corners and delicate accents that call for a finer tip. Natural wood handles and metal ferrules give the brushes a classic workshop build, and the different brush profiles make it easier to switch between coverage and detail without interrupting the painting process. On scale models, miniature parts and other hobby painting tasks, the set supports steady progress from the first colour layer to the final touch-up. It works well as an entry set for brush painting sessions that need both surface coverage and careful detail control in a compact 3-brush selection. Warning! Not suitable for children under 14 years.

Brushes & accessories

Modeling Brush HF Standard Set, brush set

300087067

€15.79

The Modeling Brush HF Standard Set brings together 3 dedicated brushes for model painting, making it easier to move from larger painted areas to crisp finishing work with one coordinated set. The combination of High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush Ultra Fine supports clean coverage, controlled edges and very fine line work across detailed builds. The 2 flat brushes suit different stroke widths, so base colours, smaller panels and touch-up sections can be handled with a brush that matches the area being painted. The ultra fine pointed brush is shaped for narrow lines, tiny accents and careful work around small molded details. Each brush uses special synthetic hair specified for model painting, a material choice aimed at controlled paint pickup and steady transfer on miniature surfaces. Black handles, silver ferrules and clearly differentiated tip sizes also make the set easy to sort and reach for during longer bench sessions. On a worktable, the set fits naturally into painting stages such as base coating, edge definition and final detail passes on scale subjects. It also works well as a compact core brush selection for builders who want one set ready for regular finishing tasks instead of choosing separate brushes one by one. Warning! Not suitable for children under 14 years.

Airbrush accessories

PC Brush Paint Black, model paint, 23ml bottle

300087228

€4.99

PC Brush Paint Black is a water-based model paint supplied in a round 23ml bottle for controlled brush application on selected areas of a build. The formula can be used without thinning, which keeps preparation short and makes it easier to place black coverage exactly where a part, edge or marked section needs it. After drying, the paint becomes water-resistant, giving the finished coat a stable surface for later handling during the build process. The data also states that the dried paint does not dissolve in water or thinner, so cleanup belongs before the coat sets; tools should be washed with water immediately after painting. For layered finishing work, the paint can be painted over with Polycarbonate Spray paints, with the spray applied in several thin coats rather than one heavy pass. This paint suits detail work on model components, small corrections and brush-applied black sections shown in finishing guides or part diagrams. It also fits builds that combine hand-painted accents with later spray stages, where precise placement and a compact 23ml bottle help keep the workbench setup focused and easy to manage. Warning! Not suitable for children under 14 years.

Brushes & accessories

Pointed Brush Medium, modeling brush with wood handle

300087016

€2.89

The Pointed Brush medium is built for careful paint application where small details and clean edges matter. Horse-hair bristles form a fine pointed tip that helps place paint with accuracy on narrow sections, trim areas and delicate surfaces, while the wooden handle supports a steady hold during close work. Its slim profile suits hobby benches where controlled strokes count more than broad coverage. The pointed shape helps guide paint into small recesses, along panel lines or onto tiny raised details without flooding surrounding areas. The natural wood handle adds a familiar, balanced feel in the hand, and the strain-reducing design supports longer sessions spent refining miniature parts, model accessories or other detailed painted sections. On a model-making table, this brush fits the moments that call for patience and precision, from touching in small accents to sharpening edges after a base coat has dried. It also works well as a dedicated detail brush kept alongside broader brushes, ready for the final passes that define crisp, finished-looking results. Warning! Not suitable for children under 14 years.

Brushes & accessories

Pointed Brush Small, modeling brush for detail work

300087017

€2.89

The Pointed Brush Small is made for detail painting where a broad stroke would overwhelm the surface. Its fine pointed tip helps place paint on narrow edges, recessed lines and small moulded sections, giving model work a cleaner, more controlled finish at the stage where accuracy matters most. The slim white handle keeps the brush easy to guide during short, careful movements. That shape suits tasks such as picking out cockpit controls, tracing trim, refining panel accents and touching in tiny areas after the main colour coat has dried. The pointed profile also helps when paint needs to reach corners or raised details without flooding the surrounding surface. For miniature and scale work, that control can make colour separation and final finishing more precise. On the bench, this brush fits the moments that call for patience rather than coverage: adding fine lines, correcting small sections and working through the last visual details that give a build its finished character. It also suits careful hobby painting on compact parts where a steady tip and measured paint application are more useful than a larger brush head. Warning! Not suitable for children under 14 years.

PS spray paints

PS-XX Dark Blue Polycarbonate Spray Paint 100 ml

300069944

€12.49

PS-XX Dark Blue is a 100 ml spray paint for polycarbonate bodies, made for model shell finishing where the coating needs to match the body material. The dark blue shade gives RC bodyshell projects a strong, even color base that reads clearly on curved fenders, roof sections and side panels. As part of the PS paint range, this spray is intended for use on polycarbonate shells rather than general household surfaces. That material focus matters during body preparation, because RC shells flex and carry molded contours, window lines and wheel arch shapes that need a coating suited to the substrate. The 100 ml content gives useful capacity for complete coverage on many shell layouts and also supports follow-up work such as reinforcing color depth in selected areas. In multi-step paint schemes, Dark Blue can serve as the main body color or as one section within a masked design. On the bench, the can fits naturally into body finishing work for touring cars, buggies or other RC shell projects that use polycarbonate. It suits fresh builds, replacement bodyshells and repaint work where a defined dark blue tone is needed for a clean, model-focused finish.

Brushes and accessories

Sanding Cloth #600, model hobby abrasive sheet

300087231

€4.69

This #600 sanding cloth brings a controlled abrasive surface to model hobby work, combining a soft backing with a grit suited to material removal, surface correction and early-stage finishing. The 170 x 130 mm format sits flat on benches, wraps around sanding blocks and follows curved sections more easily than a rigid sheet when bodywork, filler or primer needs even attention. The cloth can be used for both dry and wet sanding, which supports different workshop routines across paint preparation and surface cleanup. Water use helps carry sanding residue away from the contact area, while dry use suits quick checks and local corrections between steps. The abrasive range is part of a 5-grit series that also includes #1000, #1500, #2000 and #3000, with the number after # indicating the roughness grade. This sheet is supplied as 1 piece. On model bodies, parts and other hobby surfaces, the soft cloth structure stays easier to place over edges, corners and gentle curves. Limited fold lines help avoid pronounced scratch marks when the sheet is bent during use, making it a useful choice for repeated sanding passes in detailed finishing work. Warning! Not suitable for children under 14 years.

Diorama texture paints

TextureClaySoil Brown, diorama clay, 150g

300087221

€14.49

TextureClaySoil Brown brings shaped ground relief to diorama bases with a pre-colored brown clay that is made for soil effects rather than a flat painted surface. The 150 g pack suits scenes across a wide 1/6 to 1/48 scale range, where uneven earth, ruts and worked terrain help a vehicle or figure sit more naturally in the setting. The water-based formula limits odor and helps limit dirt on hands during longer shaping sessions. Numerous colored particles in the clay support a more natural soil look, and the surface can be worked directly after kneading the bag contents. A thin layer of bond is applied to a rigid display base first, then the clay is spread over it and textured with stiff brushes to form irregular ground. Tracks and tires can be pressed into the surface to depict traces, and Brown can be mixed with Dark Earth to shift the tone across the base. The clay is not adhesive like putty, so cement or wood glue is required separately. Solvent cement and instant cement are not suitable. Drying takes about 2 to 7 days. On military scenes, vehicle displays or figure settings, the clay helps turn a plain base into terrain with visible depth and contact marks. It also suits compact groundwork studies where brush texture, wheel impressions and mixed earth tones define the final scene. Warning! Not suitable for children under 14 years.

Diorama texture paints

TextureClaySoil DarkEarth, diorama clay, 150 g

300087222

€14.49

TextureClaySoil DarkEarth is a 150 g diorama clay for building realistic ground texture on scenic bases and model displays. The dark earth colour and the numerous coloured resin particles work together to give the surface a soil-like appearance, while the clay body can be shaped into bumps, shallow depressions and broken terrain that look less flat than a plain painted base. This modelling material is aimed at groundwork rather than fine structural parts. Spread across a base, it helps establish the landform under vehicles, figures or military scenes before further detailing is added. The mixed particle content creates visible variation through the surface, which helps earth sections avoid a uniform finish. Because the compound is already coloured in a dark earth tone, the base starts with a terrain-appropriate look even before weathering powders, grass or other scenic materials are applied. On a tank display, the clay can define churned soil around the running gear area and shape the rise and fall of the ground beneath the hull. On a small vignette or larger diorama, it supports rough paths, embankments and irregular field surfaces that give the scene a more convincing setting. Warning! Not suitable for children under 14 years.

Polish, cleaners, aging materials

Weathering Sponge Brush Fine, model tool

300087084

€6.19

The Weathering Sponge Brush Fine brings a precise applicator shape to close, detailed finishing on scale models. Its fine white sponge tip reaches small edges, narrow sections and tight surface areas where broad tools can leave too much material, making it suited to subtle weathering passes and controlled blending. A silver metal ferrule secures the sponge tip to a tapered black handle, and the longer handle gives a balanced hold for short dabbing motions and careful directional strokes. The brush is specially designed for use with Weathering Master material, so pigment can be picked up, placed and softened in small amounts rather than spread in a heavy patch. This makes it useful for building worn highlights, dusty corners, shaded panel lines and light grime effects step by step. On military subjects, road cars, motorcycles or rail models, the fine tip helps place weathering exactly where surface detail needs extra depth. It also suits touch-up work after the main paint stage, when small marks, edge wear and blended transitions can change the overall finish of a model without covering the underlying detail. Warning! Not suitable for children under 14 years.

Polish, cleaners, aging materials

Weathering Sponge Brush Medium, hobby tool

300087083

€6.19

The Weathering Sponge Brush Medium is a hobby finishing tool made for detailed weathering work on scale models and similar surfaces. Its oval sponge tip applies Weathering Master material with a soft, controlled touch, so shading, dust effects and worn edges can be built up in small steps instead of landing as a hard brush mark. A resilient sponge head changes how weathering material meets the surface. Dabbing creates broken, natural-looking texture, while light sweeping or tapping helps blend pigment into corners, raised detail and recessed lines. The tapered black handle and silver ferrule keep the brush balanced in the hand, and the printed Medium designation makes it easy to distinguish from other sizes on the workbench. This version sits between pinpoint application and wider coverage, which helps when a finish needs both control and visible spread. On vehicle bodies, aircraft panels, armour sections or diorama parts, the brush supports rust tones, road grime, soot effects and subtle fading with a measured application pattern. It suits finishing sessions where repeated passes matter, whether adding a faint dusty edge around vents or building heavier deposits around seams and textured surfaces. Warning! Not suitable for children under 14 years.

XY acrylic colours

XF-1 Flat Black, acrylic paint, 23 ml jar

300081301

€5.491 l = €238.70

XF-1 Flat Black is an acrylic paint for scale model finishing, supplied in a 23 ml jar and suited to the deep matte areas that give a build visual weight. The flat black tone fits naturally on chassis sections, cockpit parts, mechanical details and shadowed recesses where a reflective surface would break the scale effect. The acrylic formula supports careful brushwork on small parts and controlled coverage across larger painted sections. On military subjects it can define tools, tracks and interior sections; on cars it suits undersides, trim areas and engine bay details; on aircraft it works well for cockpit elements and selected panel accents. The 23 ml jar size keeps a frequently used workshop colour close at hand for repeat touch-ups, layered weathering steps or fresh contrast on newly added parts. At the bench, Flat Black often becomes one of the first colours opened and one of the last used for final corrections. It suits focused detailing sessions as well as broader finishing work, giving model builders a reliable matte black shade for projects that call for depth, separation and crisp visual definition.

XY acrylic colours

XF-2 Flat White, acrylic paint, 23 ml jar

300081302

€5.491 l = €238.70

XF-2 Flat White is an acrylic paint for model work, supplied in a 23 ml jar and formulated for brush application. The matte white color gives scale builds a clean, non-gloss finish that suits everything from small cockpit details to larger painted sections, with the jar size keeping enough paint on hand for repeat use across a project. The paint is identified as XF-2 Flat White in the Tamiya acrylic range, making it easy to match with build notes, color plans and established hobby paint references. The safety data names it as a liquid paint with a flash point of 33°C and a density of 1.2 g/mL at 23°C. The listed appearance is white with an alcohol odor. For handling, use in well-ventilated areas and keep away from heat, sparks and open flames. Protective gloves and eye protection are stated in the safety information. On the bench, this color fits careful brushwork on model bodies, interior sections, figures, scenery details and repair spots where an even matte white is needed. The 23 ml format also suits keeping a standard white ready between sessions for touch-ups, layered coverage and consistent finishing across multiple builds.

XY acrylic colours

X-11 Chrome Silver Gloss, acrylic paint, 10 ml

300081511

€3.591 l = €359.00

X-11 Chrome Silver Gloss brings a bright metallic finish to plastic model building, with a brush paint format that suits controlled work on small parts and defined sections. The 10 ml jar size keeps the paint easy to handle during detail painting, whether the focus is trim, cockpit elements or mechanical accents that need a reflective silver tone. This acrylic paint is identified as X-11 and described as Chrome Silver Gloss, giving model builders a specific shade for metallic highlights rather than a general silver. The paint is supplied as a liquid brush colour, which makes it suitable for placing colour into recesses, along edges and across moulded detail where precision matters. The safety data identifies the mixture as flammable and states that it should be used in well-ventilated areas. The same documentation describes a density of 1 g/ml at 23°C and a flash point of 31-33°C. On the bench, this colour suits small finishing steps that change the look of a build, such as picking out grilles, trim strips or interior parts with a brighter metallic contrast. It also works for touch-up tasks when a model needs a consistent chrome silver gloss across separate painted sections.

PS spray colours

PS-5 Black, polycarbonate spray paint, 100 ml

300086005

€10.991 l = €109.90

PS-5 Black brings a dedicated spray format to polycarbonate model finishing, combining a deep black colour with the quick, even coverage of an aerosol can. The 100 ml content gives a usable amount for coating bodyshell sections, laying down backing coats or refining darker design areas on compatible model parts. This paint is identified for polycarbonate, which matters when the surface calls for a formula intended for that material rather than a general craft coating. The spray can format helps cover curved panels, roof sections and side areas with a continuous pass instead of brush marks. Black also plays several concrete roles in model finishing, from solid single-colour bodies to contrast sections, window borders and visual depth behind brighter outer colours. The compact can size stores easily with other workshop supplies while keeping the colour reference simple through the PS-5 designation. On the bench, PS-5 Black fits paint preparation for RC bodyshell projects, replacement shells and detail-led custom schemes. It also suits repeat finishing sessions where the same black tone is needed across separate polycarbonate parts or later repaint work. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-18 Semi Gloss Black, acrylic paint, 10 ml

300081518

€3.591 l = €359.00

X-18 Semi Gloss Black is an acrylic brush paint for plastic model building, supplied in a 10 ml jar for controlled application on smaller parts and focused paint sessions. The semi gloss finish gives black surfaces a measured sheen that reads cleaner than flat black and less reflective than full gloss, which helps shaped details stay visible under light. This paint is identified as X-18 and described as black with a semi gloss character, making it useful for trim, cockpit sections, mechanical parts and other areas where a solid dark tone needs a subtle surface highlight. The liquid formula is supplied as a brush paint rather than a spray, which supports careful work around edges, recesses and molded detail. On mixed-color builds, the black tone also works as a visual separator between neighboring parts and markings. The compact 10 ml size keeps the jar easy to store alongside other modeling colors and practical for projects that need targeted coverage rather than large-area coating. At the workbench, the jar format suits short painting steps between assembly stages, weathering passes or final detail corrections. It fits builders who paint figures, vehicle interiors, accessories or exposed components and need a dependable black with a restrained sheen for repeated finishing tasks.

XY acrylic colours

X-20A Acrylic Thinner 250ml, paint thinner

300081040

€12.791 l = €51.16

X-20A Acrylic Thinner 250 ml is a dedicated thinner for Tamiya acrylic and polycarbonate colors, giving model painting work a controlled way to adjust paint behavior before it reaches the brush or airbrush. The bottle format keeps the liquid ready at the bench for measured mixing during body finishing, detail painting or touch-up work. The formula is identified in the safety data as a solvent in water, with propan-1-ol listed among the components. The bottle carries a ribbed screw cap for secure closure between sessions, and the 250 ml fill volume suits repeated use across multiple painting stages. Label information also states Conforms to ASTM D4236. For handling, the container is marked as flammable and specifies use in well-ventilated areas, with eye protection required. The liquid is colorless and has a solvent odor. On a model bench, X-20A can be kept alongside paint jars for mixing smaller amounts for fine lines or larger batches for broader coverage, depending on the painting task at hand. The 250 ml size also makes it a useful refill option when paint preparation and cleanup are part of regular building and finishing routines. Warning! Not suitable for children under 14 years.

Primers

Fine Surface Primer L, primer spray, white 180 ml

300087044

€14.791 l = €82.17

Fine Surface Primer L is a white primer spray in a 180 ml aerosol can, made for preparing model surfaces before painting. The white tone creates a bright undercoat that supports clean colour development on later layers, while the spray format helps reach broad panels and shaped parts with the same coating step. The can is specified for plastic, metal and wood, which makes it suitable for mixed-material model work without changing to a different primer type. The formulation is described as a primer or pre-paint coating, so its role is surface preparation rather than the final colour finish. On body panels, housings or scratch-built sections, the white base can help lighter paint shades keep their intended tone instead of being dulled by a darker substrate. The aerosol format also suits parts with edges, recesses and angled surfaces that are awkward to cover evenly with a brush. According to the supplied safety data, the contents are binders, pigments and solvents in a pressurised can. This spray fits naturally into model painting sessions where separate parts are primed before the colour coat, and it also suits touch-up work on metal or wood components that need the same white base. Use is intended outdoors or in well-ventilated areas, as stated in the safety documentation. Warning! Not suitable for children under 14 years.

XY acrylic colours

XF-56 Flat Metallic Grey, acrylic paint, 10 ml

300081756

€3.591 l = €359.00

XF-56 Flat Metallic Grey is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps the quantity focused on detail painting, touch-ups and smaller painted sections. The flat metallic tone combines a subdued grey base with a restrained metal effect, giving mechanical parts, body details and equipment surfaces a more technical look than a plain solid grey. Within a paint lineup, a shade like Flat Metallic Grey is useful where a bright silver would appear too reflective and a non-metallic grey would look too flat. The acrylic format supports controlled application on narrow edges, recessed areas and picked-out components. On military subjects, vehicle details and machinery sections, the colour can help separate metal parts visually from surrounding panels. The 10 ml size also suits bench storage, colour rotation and project-specific paint selection without committing to a larger volume. On the workbench, XF-56 can be used for careful brushwork on vents, housings, brackets or trim where a muted metallic note adds depth. It also fits finishing sessions that focus on selective accents, repairs or colour correction across an existing model scheme.

XY acrylic colours

X-27 Clear Red Gloss, acrylic paint, 10 ml

300081527

€3.591 l = €359.00

X-27 Clear Red Gloss brings transparent red colour to plastic model building, adding a glossy tinted finish that leaves moulded detail and surface structure visible beneath the coat. The acrylic paint format suits careful brush application on small sections where a solid opaque layer would hide the part's shape. The 10 ml content works well for repeated detail sessions on lenses, light units and other clear accents across multiple builds. As a clear gloss shade, it is suited to parts that need colour while still showing the form underneath, rather than covering them with a flat block of pigment. The paint is supplied in liquid form and is identified as X-27 within the X-Acrylic range. The safety data names it as a glossy special acrylic resin paint for plastic model building. On the bench, this shade fits focused finishing work such as colouring rear light sections, transparent inserts or small decorative areas that need a red gloss effect. It can also be kept alongside other modelling paints for touch-up work when a build calls for a transparent colour layer instead of an opaque coat.

XY acrylic colours

X-26 Clear Orange Gloss, acrylic paint, 10 ml

300081526

€3.591 l = €359.00

X-26 Clear Orange Gloss brings a transparent orange tone to plastic model building, combining colour tinting with a gloss surface that works well on small visual accents and clear effect areas. In a 10 ml jar, the paint quantity stays practical for bench use, whether the task is refining light lenses, adding warm transparent shading or adjusting selected body details. This X-Acrylic paint is identified in the safety data as a glossy brush paint for plastic model building and is supplied as a liquid mixture of binders, pigments and solvents. The clear orange character allows underlying moulded detail to remain visible instead of covering it with an opaque coat. A density of 1.0 g/ml is stated in the data, and the solvent content is listed at 50 - 60%, pointing to a fluid paint structure suited to thin, even application. The alcohol-like odour and flammable classification also make clear that careful handling and good ventilation belong to workshop use. On the modelling table, the 10 ml format fits short painting sessions, correction work and colour matching across separate parts without committing to a large container. It suits builders working on vehicle lights, transparent inserts and other small sections where a glossy tinted finish helps the painted area stand out with clean, focused colour.

XY acrylic colours

XF-16 Flat Aluminium, acrylic paint, 10 ml

300081716

€3.591 l = €359.00

XF-16 Flat Aluminium is an acrylic paint for scale modelling work, supplied in a 10 ml jar for controlled use on smaller sections and precise finishing tasks. The flat metallic tone suits areas that call for an aluminium appearance with a subdued surface, such as structural details, trim sections or mechanical elements that should avoid a glossy look. The acrylic formula makes this colour a practical choice when a build calls for careful brushwork, edge definition or touch-up passes after main painting is complete. A 10 ml jar also helps keep the shade manageable on the bench, with enough paint for repeated detail sessions while staying easy to store alongside other modelling colours. The Flat Aluminium tone can be used to separate metal parts visually from surrounding body colours, interior sections or darker assemblies, giving small components clearer contrast on the finished model. On military subjects, road cars, motorcycles or workshop accessories, this shade fits naturally into painting sessions where bolts, housings, panels or exposed metal sections need a restrained metallic character. It also works well for revisiting earlier builds, correcting small marks or adding final accents once the main colour scheme is already in place.

XY acrylic colours

X-1 Black Gloss, acrylic paint, 10 ml jar

300081007

€5.491 l = €238.70

X-7 Red Gloss brings a bright, glossy red finish to plastic model building in a 23 ml jar that fits neatly into bench work focused on colour accuracy, trim painting and clean visual contrast. The liquid acrylic format supports brush application on smaller parts and detail zones where controlled placement matters. This paint belongs to the X-Acrylic range and is identified as X-7 Red Gloss, making it easy to match within planned colour schemes and repeat across multi-stage finishing work. The supplied quantity of 23 ml gives enough material for repeated use on separate sections, touch-ups or more than one build depending on coverage. The safety data names it as a glossy special acrylic resin paint for plastic model building, with binders, pigments and solvents forming the mixture. Its liquid consistency suits careful loading onto a brush for edges, recesses and defined surface areas that need a smooth coloured coat. On the workbench, the red gloss tone can be used for body highlights, painted accessories or contrast sections that need a brighter visual accent than darker base colours. During custom projects, the jar format keeps the paint ready for short detailing sessions as well as longer finishing stages where several small parts are painted in sequence.

XY acrylic colours

X-12 Gold Leaf Gloss, acrylic paint, 10 ml

Liquid Surface Primer White 40ml adds a preparatory coating step before paint reaches the model, giving small parts and shaped surfaces a white base that supports a cleaner finish. The 40 ml bottle suits bench work where measured amounts and steady handling matter, whether the task is covering a single body section or touching smaller components before colour is applied. The white primer is especially useful when the planned paint scheme uses lighter shades, because the undercoat influences how those colours read once dry. Its liquid form makes it suitable for detailed model work where recessed lines, edges and contours need coverage that a broad sanding step alone cannot provide. The square glass bottle with ribbed screw cap stores neatly between sessions and keeps the contents ready for repeated use across ongoing builds. The bottle label identifies the contents clearly as white liquid surface primer, which helps keep paint and preparation materials distinct on a busy workbench. In a model painting setup, this primer fits naturally into the stage between surface preparation and colour coats. It can be used when refining a fresh build, reworking a section before repainting, or preparing individual parts that need a lighter base before the final finish is added. Warning! Not suitable for children under 14 years.

TS spray colours

TS-30 Metallic Silver Gloss, spray paint, 100 ml

300085030

€10.491 l = €104.90

TS-30 Metallic Silver Gloss is a spray paint for model finishing that combines a metallic silver tone with a gloss surface in a 100 ml aerosol format. The special acrylic resin spray is intended for model work, where broad panels, curved sections and shaped parts benefit from an even coat laid down by a fine spray rather than a brush. The can is marked for plastics, making it suitable for compatible plastic model parts that need a uniform metallic appearance. Aerosol application helps cover contours, edges and recessed areas with the same colour character, which is especially useful when a build includes multiple connected surfaces. The metallic silver shade works well wherever a bright machined look, body colour accent or reflective trim effect is wanted on scale subjects. The gloss finish also gives decals and further detailing a clean painted base once the coat has cured. On the workbench, TS-30 suits body panels, fairings, exterior parts and other prepared components that call for a sprayed finish instead of hand brushing. The 100 ml can size fits both single-colour touchups and broader coverage across larger model sections. Use only with the handling care required for an aerosol paint. Warning! Not suitable for children under 14 years.

TS spray colours

TS-79 Semi Gloss Clear, paint spray, 100 ml

300085079

€11.491 l = €114.90

TS-79 Semi Gloss Clear is a 100 ml paint spray for model finishing, designed to give larger surfaces a semi gloss clear coat with the speed and coverage of a synthetic lacquer aerosol. The fast-curing formula helps move a build from colour work to final surface treatment without a long wait between stages. This spray is especially useful on broad model areas where a brush can leave visible overlap, such as car bodies, fairings and other shell sections. The semi gloss finish sits between flat and full gloss, making it suitable for builds that need a softer final sheen rather than a high-shine coat. A 100 ml can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a concrete guide for planning workshop stock and multi-build sessions. The formula also supports layered finishing, because enamel and acrylic paints can be added after the overall coating stage for smaller details and accents. On the bench, TS-79 works well as the clear stage after the main colour has been completed and dried. It suits modelers who want consistent coverage across larger panels, then return with finer brush-painted details to complete trim, markings or small visual contrasts. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-20A Thinner 46 ml, acrylic paint thinner

300081030

€8.991 l = €195.43

X-20A Thinner is a 46 ml acrylic paint thinner for model finishing work, supplied in a compact bottle that fits neatly on a hobby bench beside paints, palettes and cleaning tools. It is intended for thinning Tamiya acrylic and polycarbonate colors, helping painters adjust paint flow for finer brushwork and more controlled coverage on detailed model surfaces. The formula is a liquid solvent in water and appears clear in the bottle. According to the supplied safety data, it has a density of 0.93 g/ml at 20 °C, a flash point of 32 °C and partial solubility in water. These technical details matter during measured mixing and cleanup, where only small amounts are typically needed at a time. The bottle uses a ribbed screw cap for secure closure between sessions, and the 46 ml fill size suits regular bench use without taking much space among paints and tools. On a painting table, X-20A can be used when acrylic color needs a different working consistency for detail areas, edges or smooth coats. It also suits cleanup after painting, when brushes or airbrush parts need fresh thinner to loosen remaining color before the next stage of model work. Warning! Not suitable for children under 14 years.

XY acrylic colours

XF-3 Flat Yellow, acrylic paint, 23 ml jar

300081303

€5.491 l = €238.70

XF-3 Flat Yellow brings a defined matte yellow tone to model painting in a 23 ml jar that sits neatly on the bench and keeps the colour close at hand during detail work. The acrylic formula gives builders a dedicated paint option for small sections, trim areas and surface accents where a flat finish suits the subject better than gloss. The 23 ml volume offers enough paint for repeated use across separate stages of a build, whether the task is picking out cockpit details, adding utility markings or covering selected panels with a solid yellow tone. The jar format supports controlled brush loading and helps keep colour changes organised when several shades are in use at once. Within the XF range, Flat Yellow works as a specific colour reference rather than a mixed approximation, which helps when a scheme calls for a consistent matte yellow across multiple parts. On the workbench, this paint suits careful finishing passes on scale vehicles, figures and scenery pieces where crisp placement matters. It also fits repair and touch-up tasks after assembly, when a small amount of matching colour is needed to complete edges, joins or added details.

Lacquer colours

LP-38 Flat Aluminum, paint, 10 ml bottle

300082138

€3.491 l = €349.00

LP-38 Flat Aluminum brings a subdued metallic shade to scale finishing work in a compact 10 ml bottle. The flat effect gives aluminum areas a softer, less reflective appearance than a gloss metallic, which suits machinery, body details and surface sections that need a more restrained metal look on a finished model. This paint sits in the LP paint range and is identified as LP-38 Flat Aluminum in the colour lineup. The 10 ml content works well for bench setups where several shades are kept close at hand for layered painting, small corrections and repeated detail passes. The muted aluminum tone can be used to separate vents, panels, housings or trim from neighbouring colours, helping painted sections read more clearly at scale. On military, automotive or mechanical subjects, the flatter sheen also supports weathered or functional-looking metal areas instead of a polished finish. At the workbench, the bottle size suits focused sessions where only a small amount is needed at a time. It fits naturally into paint racks, tool drawers and organised hobby stations, ready for touch-up work, accent painting or planned colour placement across a larger build.

Lacquer colours

LP-61 Flat Metallic Grey, paint, 10 ml

300082161

€3.591 l = €359.00

LP-61 Flat Metallic Grey is a modelling paint in a 10 ml jar, sized for controlled application on smaller painted sections and detail work. The flat metallic grey tone gives scale surfaces a subdued metal look, making it useful where a finish needs metallic character without a glossy sheen. Within a paint lineup, this shade can be used to separate mechanical areas, trim sections and other picked-out details from surrounding colours. The 10 ml content supports measured use, whether the task is a first coat on a small part or a later colour match during ongoing finishing work. The jar format also keeps the colour easy to identify and return to between painting sessions, which helps when a build is completed in stages rather than in one sitting. For model makers working through careful surface finishing, a dedicated metallic grey expands the range of tones available beyond plain solid colours. On the bench, LP-61 Flat Metallic Grey suits focused jobs such as painting selected components, refining visual contrast on assembled sections or revisiting earlier work for consistent colour continuity. Stored alongside other modelling supplies, the clearly designated shade is ready when a build calls for a restrained metallic accent rather than a bright reflective finish.

Brushes and accessories

Pipette Set 90mm/150mm, paint tool set, 3+3

300087124

€8.29

This pipette set supports accurate paint handling for brush work and airbrush preparation with 2 useful lengths in one pack. It contains 3 short pipettes at 90 mm and 3 long pipettes at 150 mm, giving a simple way to transfer, measure and mix paint with more control across different bottle sizes. The 90 mm pipettes have a narrower shape than regular pipettes, which helps when reaching into slim openings where a wider tube is awkward to place. They are convenient for use with 10 ml paint and 40 ml bottles, while the longer 150 mm version adds extra reach for deeper containers. Graduation markings on each pipette show the amount withdrawn, making it easier to repeat paint mixes and adjust concentration with a clear visual reference. The solvent-resisting PE resin construction is suited to regular contact with hobby paints. On the workbench, the set fits naturally into mixing, thinning and transferring tasks without taking up much space. Keeping both short and long pipettes close at hand helps separate colours or mixtures and supports cleaner, more consistent paint preparation across different modelling sessions. Warning! Not suitable for children under 14 years.

Primers

Surface Primer Grey 100ml, model primer for ABS

300087026

€9.291 l = €92.90

Surface Primer Grey 100 ml is a model primer for preparing parts before painting, with a formula suited to ABS, styrene and metal. The grey tone creates a neutral base that works especially well under darker colours, helping the next paint layer read more evenly across the surface. Before colour coats are added, the primer can be applied to body sections, detail parts and other model components that need a consistent starting layer. ABS and styrene are common materials in model building, and the added suitability for metal parts makes the can useful across mixed-material assemblies. The primed surface may also be wet sanded before paint is applied, which supports finer surface correction where seams, mould lines or small imperfections need extra preparation. Each can contains 100 ml, a practical size for regular bench use without taking up much space in the work area. On a build table, this primer fits naturally into the paint-prep stage, whether the task is coating a single replacement part or readying a full shell for darker finishes. It also suits projects where plastic and metal components appear side by side and need the same grey undercoat before the final colour is sprayed. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-2 White Gloss, acrylic paint, 23 ml jar

300081002

€5.491 l = €238.70

X-2 White Gloss is an acrylic brush paint for model making, supplied in a 23 ml jar for detailed finishing work. The white gloss shade brings a bright, reflective surface to selected sections, whether the aim is to pick out trim, cover small parts or add contrast against darker colours on a build. The formula is identified in the safety data as a liquid acrylic resin special paint for brush application, with pigments, binders and solvents. That liquid format makes it suitable for loading a brush directly from the jar and working into corners, edges and other defined areas on model parts. The paint is listed with a density of 1 g/mL at 23 °C, and the safety data names an alcohol-like odour as part of the material profile. For storage and handling, the container should be kept tightly closed in a cool, well-ventilated place. On the workbench, this 23 ml size suits repeat touch-ups, small assemblies and colour matching across multiple sections of the same build. The glossy white finish can be used where a clean, light surface is needed on exterior panels, interior details or other brush-painted components in a model project.

XY acrylic colours

XF-10 Flat Brown, acrylic paint, 23 ml

300081310

€5.491 l = €238.70

XF-10 Flat Brown is an acrylic paint for model finishing, supplied in a 23 ml jar for compact bench use and controlled access during painting sessions. The flat brown tone gives parts, panels and scenic details a matte surface appearance that suits weathered sections, interior areas and earth-toned accents on scale subjects. The XF designation identifies this shade within the Tamiya paint range, which helps when planning color layouts across separate stages of a build. The jar format keeps the paint contained between sessions and supports measured use for smaller quantities on detail-focused work. Flat brown can be used to pick out trim, tools, stowage areas or terrain features where a low-sheen finish fits the subject better than a gloss surface. The 23 ml content also makes it practical to keep several distinct tones on the workbench without taking up much space. On a model bench, this paint suits careful brushwork on cockpit sections, equipment details or groundwork elements that need an earthy, subdued tone. It also fits touch-up tasks after assembly or finishing steps, where a clearly coded shade helps keep the color choice consistent across separate parts and later corrections.

XY acrylic colours

XF-53 Flat Neutral Grey, acrylic paint, 23 ml

300081353

€5.491 l = €238.70

XF-53 Flat Neutral Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the shade code XF-53. The flat neutral grey tone suits scale subjects that call for a muted, non-gloss surface, whether the goal is full-area coverage on smaller parts or careful colour placement on selected sections. Within a modelling setup, the coded jar format makes the paint easy to recognise, sort and return to during multi-step painting work. The 23 ml volume gives a practical amount for repeated bench sessions, and the flat finish direction supports weathered, technical or understated colour schemes where shine would look out of place. The neutral grey tone also works well alongside stronger accent colours, darker mechanical sections or layered finishing plans that rely on restrained base shades. Hazard pictograms shown for this paint indicate that careful handling is required during hobby use. On the workbench, XF-53 can be used for detail passes, touch-up stages and planned colour blocking across model components. The compact jar size stores neatly with other paint supplies and keeps a frequently used grey tone close at hand for ongoing builds and refinishing tasks.

XY acrylic colours

XF-57 Flat Buff, acrylic paint, 23 ml jar

300081357

€5.491 l = €238.70

XF-57 Flat Buff is an acrylic paint in a 23 ml jar, supplied as a yellow-brown shade for scale modelling and finishing work. The flat finish keeps reflected light low, so painted sections read as muted colour rather than gloss, which suits military subjects, weathered equipment and scenery details on dioramas. The XF series designation gives this colour a clear place within a wider modelling paint range, helping with repeat use across touch-ups, matched details and ongoing build plans. The yellow-brown tone works well on dust effects, fabric impressions, wood-like details and aged trim where a cleaner bright colour would look out of place. The jar format keeps the paint contained between sessions and makes it easy to return to the same colour on later stages of a project. On the bench, XF-57 fits neatly into detail painting, selective panel work and finishing passes on smaller parts. The packaging image shows flame and warning hazard symbols, so handling and storage should follow the caution marking shown for this paint during hobby use.

Brushes and accessories

Brush Conditioning Fluid 23ml, brush care fluid

300087181

€5.191 l = €225.65

Brush Conditioning Fluid 23ml adds a dedicated care step to model painting by treating brush bristles after cleaning and before storage. The compact 23 ml bottle sits easily on a hobby bench, and the screw-cap format keeps the liquid contained between sessions. The fluid is presented in a clear glass bottle and appears as a transparent liquid, while the side label indicates handling points such as shaking before use and using appropriate thinner for brush cleaning beforehand. The bottle is intended for brush maintenance rather than paint thinning, so it fits naturally into the finishing stage of a painting routine. The safety sheet identifies the mixture as an O/W emulsion, and the storage guidance states protection from frost, heat and direct sunlight. The same document notes that the liquid is emulsifiable in water at 20 °C. On the bench, this kind of brush care works well after detail painting, figure finishing or body shell decoration, when a brush has already been cleaned and the bristles need conditioning before the next session. It also suits longer breaks between projects, when keeping brush shape during storage matters as much as the paintwork itself. Warning! Not suitable for children under 14 years.

Polish, cleaners, aging materials

Polishing Compound Fine, model finishing paste

300087069

€6.691 l = €304.09

Polishing Compound Fine is a model finishing paste made for careful surface work on painted sections, clear parts and metal details. The fine grade targets light marks and supports a more even gloss, making it useful when a build is close to its final finish and small imperfections still catch the light. The compound comes in a 22 ml tube and uses a paste consistency that stays manageable on small parts and narrow sections. This format helps place the material where it is needed instead of flooding surrounding detail, which matters on canopies, body panels and trim pieces with tight edges. The product is identified for model making use, and the fine abrasive level fits later polishing stages after heavier correction work is complete. The safety data lists the mixture as an O/W emulsion with additives, with a pH value of 8.3 at 25 °C and a relative density of 1.1 at 20 °C. On the workbench, it suits the final refinement of a painted shell, the clearing of faint handling marks on transparent parts, or the brightening of small metal areas that need a cleaner finish. Use in areas with adequate ventilation and store the closed container away from heat and direct sunlight. Warning! Not suitable for children under 14 years.

PS spray colours

Polycarbonate Body Cleaner, model paint prep 40ml

300087118

X-1 Black Gloss is an acrylic paint for plastic model building, supplied in a 23 ml jar for repeated bench use. The black gloss finish gives painted sections a dark, reflective surface that suits trim, panel areas and detail work where a clean, solid tone matters. The formula is described as a glossy brush paint and is intended for model-making applications rather than general craft use. On body shells, interior parts and small exterior details, the gloss surface changes how edges catch the light and helps separate black sections from neighbouring colours. The 23 ml volume supports more than a single pass, which is useful when a build needs a base coat, later corrections and matching touch-ups on added parts. As a liquid paint, it can be worked into narrow recesses, raised moulded details and small shaped areas that need controlled coverage. At the workbench, this colour fits projects that call for black trim, cockpit elements, mechanical details or contrast sections on plastic models. The jar format keeps the paint ready for return use across several stages of a build, from first colour application to later finishing work.

XY acrylic colours

X-26 Clear Orange Gloss, acrylic paint, 23 ml

300081026

€5.491 l = €238.70

X-26 Clear Orange Gloss is an X-Acrylic resin paint for plastic model building, supplied in a 23 ml jar for brush-applied colour work on small parts and detailed assemblies. The clear orange tone lays a transparent gloss layer over the surface, so moulded detail and the base beneath can remain visible while the colour shifts toward a warm amber effect. That transparent character makes the paint especially useful on parts such as indicator lenses, signal covers and custom trim where solid colour would hide the shape. The gloss finish catches light across raised edges and curved surfaces, giving clear components a brighter, more defined appearance once dry. As part of the X-Acrylic range, it suits fine detail work where narrow borders, recessed sections and small matching parts need careful colour placement rather than broad coverage. The 23 ml volume also supports repeat use across several modelling sessions, whether the task is a single accent or a coordinated set of small painted sections. On a scale car, aircraft or display build, X-26 can be used to tint clear moulded parts, refresh coloured details or add contrast to selected features without covering every surrounding surface. It also fits bench work that calls for layered colour effects on compact components, where a transparent gloss tone changes the look while keeping the original form readable.

XY acrylic colours

X-32 Titanium Silver Gloss, acrylic paint, 10 ml

300081532

€3.791 l = €379.00

X-32 Titanium Silver Gloss brings a bright metallic finish to plastic model work, with a 10 ml jar sized for detail painting, trim accents and smaller colour areas. The titanium silver shade gives panels, mechanical sections and highlighted edges a crisp reflective look that changes the character of a build with controlled brush-applied colour. This X-Acrylic paint is identified in the data as a gloss brush paint for plastic model building. The liquid formula has a silver colour and an alcohol odour, with a stated density of 1.0 g/ml at 23°C. The safety data lists a boiling range of 80 to 120°C, a flash point of 31 to 33°C and a solvent content of 50 to 60%. These technical details place it clearly in the finishing stage of model work, where a metallic tone is used to define separate parts, pick out moulded detail or sharpen visual contrast between neighbouring surfaces. On vehicle kits, the shade can be used for trim lines, mechanical housings or selected body details; on other plastic model subjects, it suits small components that need a clean metallic gloss. The compact jar format also works well when a project calls for one specific accent colour rather than broad coverage across large surfaces.

XY acrylic colours

XF-15 Flat Flesh, acrylic paint, 23 ml jar

300081315

€5.491 l = €238.70

XF-15 Flat Flesh is an acrylic paint in a 23 ml jar, set up for controlled colour work on scale modelling projects where a flat skin-tone shade is needed. The clearly marked XF-15 designation helps identify the colour quickly on the bench, while the compact jar format suits repeated access during detail painting and small-area coverage. The Flat Flesh shade is suited to painted sections such as figures, interior details and other parts that call for a muted, non-gloss appearance. Acrylic paint supports careful application on fine surfaces where edges, recesses and small contours matter. The 23 ml content gives a practical amount for ongoing modelling work, whether the task is first-pass coverage, later corrections or matching previously painted sections. The label shown for XF-15 also carries hazard pictograms with a flame symbol and an exclamation mark for clear substance identification and handling awareness. On the workbench, this paint fits naturally into finishing stages that rely on precise shade choice rather than broad coverage. It can be kept alongside other coded colours for organised paint selection during figure painting, interior finishing and detail-focused touch-up sessions on scale builds.

XY acrylic colours

XF-24 Flat Dark Grey, acrylic paint, 23 ml

300081324

€5.491 l = €238.70

XF-24 Flat Dark Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss surface appearance. The dark grey tone suits scale subjects that call for restrained colour, whether the aim is painted body sections, equipment housings or structural details with a muted finish. The acrylic formula supports careful application on smaller parts and defined areas where clean edges matter. Flat Dark Grey can be used to build tonal contrast against lighter greys, metallic shades or camouflage colours, and the 23 ml jar size keeps a usable amount ready for repeat sessions at the bench. The compact container stores easily with other hobby colours and keeps the shade clearly identifiable as XF-24 during paint selection. The label format also makes it straightforward to sort within an existing paint range by code and colour name. On a model bench, this shade fits naturally into projects with machinery, vehicles, diorama structures or weathered surface details. It also works for selective repainting, panel accents and finishing passes where a gloss effect would look out of place. Handle with care: the provided hazard information indicates flammable contents and warning classification.

XY acrylic colours

XF-3 Flat Yellow, acrylic paint, 10 ml

300081703

€3.591 l = €359.00

XF-3 Flat Yellow brings a matte yellow tone to scale finishing work in a compact 10 ml jar. The acrylic formula suits controlled application on small sections, whether the task is picking out details, blocking in colour areas or refining a painted model with a clean flat surface. The XF designation identifies this shade within the Tamiya acrylic paint range, making it easier to place alongside other workshop colours during repeat builds and repair work. Flat Yellow can be used where a non-gloss appearance fits the subject better than a reflective coat, especially on utility markings, equipment details or custom colour layouts. The 10 ml content keeps the jar manageable on a crowded bench and helps portion paint for smaller sessions without opening a larger container. On the workbench, this shade fits touch-up jobs, detail painting and colour planning across model kits and accessories. It also works as a dedicated yellow kept ready for recurring tasks, such as small highlights, panel sections or repainting areas that need a consistent matte finish.

XY acrylic colours

XF-49 Flat Khaki, acrylic paint, 23 ml

300081349

€5.491 l = €238.70

XF-49 Flat Khaki is an acrylic paint for scale model finishing, supplied in a 23 ml jar for controlled use on smaller sections, detail areas and colour matching across a build. The flat finish keeps the surface non-glossy, which suits subjects that call for a subdued, service-style appearance rather than a reflective coat. The khaki tone works well where muted earth and fabric-like colours are needed on model surfaces. It can be used to pick out equipment parts, interior sections, accessories and scenic elements that benefit from a restrained military-style shade. The jar format keeps the paint contained between sessions and supports measured use during step-by-step painting work. The XF-49 code also makes the colour easy to identify within an established paint range when a build calls for the same shade again. On the workbench, this paint fits neatly into careful finishing routines such as detail correction, panel colour separation and small repaint jobs after assembly. It also suits builders who keep a selection of specific tones ready for touch-ups, weathered accents and consistent colour planning across several model projects.

XY acrylic colours

XF-63 Flat German Grey, acrylic paint, 10 ml

300081763

€3.591 l = €359.00

XF-63 Flat German Grey is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled colour application on scale builds. The flat grey tone gives painted areas a subdued surface appearance that suits subjects where a low-sheen finish is part of the visual character, from armour details to mechanical sections and weathered equipment. Within a paint rack, XF-63 works as a dedicated single shade rather than a mixed approximation, which helps keep repeat applications visually consistent across separate sessions. The acrylic formulation makes it a practical choice for small-area coverage, edge work and selective repainting where a defined grey is needed. The 10 ml content also fits neatly into hobby storage and keeps a frequently used neutral tone close at hand during ongoing build and finishing work. On the bench, this shade can be used when picking out panels, tools, fittings or other model details that call for a restrained grey rather than a reflective finish. It also suits correction work on earlier paint stages, where a compact jar and a clearly identified XF-63 label help speed up colour selection during focused modelling sessions.

XY acrylic colours

XF-78 Flat Wooden Deck Tan, acrylic paint, 10 ml

300081778

€3.591 l = €359.00

XF-78 Flat Wooden Deck Tan brings a muted matt light brown tone to scale finishing work, with a 10 ml jar size that suits careful colour placement on deck sections, trim pieces and other small painted areas. The acrylic formula is presented as a liquid brush paint, giving model builders a controlled way to add a flat surface effect where a gloss sheen would look out of place. The shade is identified as Wooden Deck Tan and is described in the safety data as light brown with an alcohol odour. A flash point of 33°C and CLP hazard labelling for flammable liquid, eye irritation and inhalation risk make this a workshop material that calls for attentive handling and good ventilation during use. The density is listed at about 1.2 g/ml at 23°C, and the paint is supplied in the compact 10 ml format commonly used for precise colour selection across detailed model projects. On ship models, harbour scenes or weathered structural details, the flat finish helps timber tones read with a restrained, scale-appropriate look. The small jar size also suits touch-up work, selective repainting and keeping a specific deck colour ready for repeat use across ongoing builds.

Brushes and accessories

18 Well Brush Paint Palette, paint tray set

300087195

€6.39

The 18 Well Brush Paint Palette set brings order to brush painting with 5 lightweight PET palettes shaped for controlled colour handling at the workbench. Each palette uses 18 hemispherical wells, and the 20 mm diameter with 8 mm maximum depth gives each paint portion a defined place while mixing and loading a brush. The 0.3 mm PET construction keeps the palettes light in hand, and each tray can be used as a full 18-well layout or cut with scissors or a hobby knife into smaller blocks when a more compact format suits the task. That flexibility helps when switching between broad colour sessions and focused detail work on smaller model sections. The ridges between wells create physical separation from one colour to the next, while the edge notches provide a clear resting point for the brush during pauses between strokes. A lip around the base improves stability on the bench and also gives a practical point for securing the tray with masking tape when a fixed painting setup is preferred. On a crowded hobby table, that combination supports cleaner handling of mixed paints, touch-up shades and repeated brush loads across longer painting sessions.

Diorama texture colours

Epoxy Putty Smooth Surface, modeling filler 25g

300087052

€6.491 kg = €259.60

Epoxy Putty Smooth Surface is a 2-component modeling filler developed for clean surface work on scale builds, with a 25 g pack size that suits detail-focused bench tasks. The smooth-finish formula is aimed at reshaping parts, refining contours and building up areas that need a neat base before the next finishing step. Its stated uses cover re-modeling, detail fabrication, sculpturing, kit modifications and repairs, which makes it suitable for both corrective work and custom additions on model subjects. The compound can be applied where panel areas, edges or added forms need to be blended into surrounding surfaces with more control than a coarse filler allows. Separate wrapped bars indicate the two-part format used to prepare the material for application. This makes the putty relevant for filling damaged sections, forming small custom details and adjusting kit parts during conversion work. On the workbench, it fits tasks such as rebuilding a chipped corner, refining a hand-made detail or smoothing a modified section before further finishing. The compact 25 g quantity also suits targeted jobs where only a limited amount of material is needed rather than a large batch for broad coverage. Warning! Not suitable for children under 14 years.

Lacquer colours

Lacquer Thinner Retarder 250ml, paint thinner

300087194

€14.991 l = €59.96

Lacquer Thinner Retarder 250ml is formulated for lacquer paint work where a slower drying pace helps the finish settle more cleanly. In airbrush use, the added retarder gives the thinned paint more open time, which is especially useful when overspray needs to be covered before it dries into the surface. The result is a smoother paint layer with a glossier look when the application calls for it. The thinner can be used with lacquer paints and spray paints, with a stated mixing ratio of 1:1 to 2:1 thinner to paint. That range allows the mix to be adjusted to the paint job and application method instead of forcing a single fixed setup. The 250 ml bottle provides a practical volume for repeated bench use across multiple painting sessions. Where humidity can interfere with the finish, the retarder helps avoid blushing, the foggy white effect caused when moisture becomes trapped in the paint film. On the workbench, this makes a clear difference during body painting, touch-up passes and other stages where a wet edge matters. It suits model finishing tasks that call for a smoother lacquer surface, more control during spraying and cleaner results when conditions are less than dry.

Lacquer colours

LP-2 White Gloss, lacquer paint, 10 ml jar

300082102

€3.491 l = €349.00

LP-2 White Gloss is a lacquer paint for scale model finishing, supplied in a 10 ml jar and identified within the LP paint range by the LP-2 designation. The white gloss shade gives painted sections a bright, solid look that stands out clearly on bodywork, trim and small details. The lacquer formula makes this paint a focused choice for model building and finishing work where a specific colour reference matters. The compact 10 ml size keeps the jar easy to store on a workbench and practical to reach for during detail passes, correction work or planned colour matching within the same build. The clearly marked LP-2 code also helps keep paint selection consistent when several shades are used across one project. Where a model calls for white body sections, accent areas or sharply defined contrast, this gloss shade supports a clean visual result. On the bench, the jar format suits careful brush application to smaller parts and controlled use on selected sections that need a bright gloss white. It also fits neatly into a paint lineup for ongoing model projects, touch-up work and repeat finishing sessions where the same colour needs to be identified again quickly.

Polish, cleaners, aging materials

Polishing Compound Coarse, model finishing paste

300087068

€6.691 l = €304.09

Polishing Compound Coarse is a model finishing paste for the first stage of surface correction, supplied in a 22 ml tube for controlled hobby-bench use. The coarse grade is suited to smoothing visible marks, refining painted areas and preparing model surfaces for later treatment with finer compounds when a more polished finish is required. The compound is a white, pasty emulsion formulated for model making, giving close control when worked onto selected sections rather than flooding a whole surface. This makes it useful on body shells, painted panels and other detailed parts where local correction matters. The packshot and product marking identify this as the coarse version within a multi-step compound range, placing it at the stronger cutting stage before fine and finish grades. The safety data identifies the mixture as partially emulsifiable in water, with a pH value of 9.5 at 25 °C and a relative density of 1.2 at 20 °C. On the workbench, a small amount can be applied to areas that need stronger polishing before the next finishing step. Use in well-ventilated areas and handle with care, as the hazard information states that the compound can cause allergic skin reactions and repeated contact may lead to dry or cracked skin. Warning! Not suitable for children under 14 years.

PS spray colours

PS-23 Gun Metal Grey, spray paint, 100 ml

300086023

€10.991 l = €109.90

PS-23 Gun Metal Grey brings a dark metallic tone to polycarbonate model surfaces in a 100 ml spray can, giving RC bodyshell projects a finish that reads clean and mechanical under workshop light. The aerosol format suits broad shell panels and curved sections where an even colour layer matters across the full shape. This paint is specified for polycarbonate, so it matches the material used on many RC car bodies rather than serving as a general craft coating. The Gun Metal Grey shade sits in the technical, motorsport end of a colour scheme and works well for single-colour shells, layered race liveries or darker accent sections. Direct spray application helps cover rooflines, arches and side panels with a continuous coat that would be harder to achieve with a brush. The can format also keeps the paint ready for quick colour sessions on fresh bodyshell projects or repaint work. On the bench, PS-23 fits the stage where a clear shell moves into its final visual identity through colour and finish. It suits hobby painting sessions focused on RC car bodies, custom body panels and replacement shells that need a polycarbonate-specific coating in a compact 100 ml size. Warning! Not suitable for children under 14 years.

TS spray colours

TS-33 Flat Hull-Red, spray paint, 100 ml

300085033

€10.491 l = €104.90

TS-33 Flat Hull-Red is a 100 ml spray paint for plastic model parts, built around a special acrylic resin formula and delivered through an aerosol can for broad, even coverage. The flat color finish suits subjects that call for a muted surface rather than shine, whether the goal is a ship hull tone, structural detailing or a weathered painted section on a scale build. The aerosol format helps lay color across larger panels and shaped parts with a steady spray pattern, which is useful on curved shells, molded recesses and edges that are slower to cover by hand. The can is labeled for plastics, making it a focused choice for model kit finishing rather than a general household coating. The TS-33 designation also helps match the shade within an established hobby paint range when a build calls for a specific color reference. As an aerosol paint, the can is classified as extremely flammable and pressurized, and it should be used only with careful handling and good ventilation. On the bench, this spray suits primed assemblies, separate body sections and detail groups that need an even flat red-brown tone across multiple parts. It also works well when a build calls for quick, consistent color application before further detailing, masking or weathering steps are added. Warning! Not suitable for children under 14 years.

TS spray colours

TS-34 Camel Yellow Gloss, spray paint, 100 ml

300085034

€10.491 l = €104.90

TS-34 Camel Yellow Gloss is a 100 ml aerosol spray paint for plastic models, built for fast, even colour application on larger surfaces and shaped parts. The gloss yellow shade gives body panels, fairings and exterior sections a bright, solid finish that reads cleanly on display models and working RC builds alike. This TS paint is described as a special acrylic resin spray, combining pigments, binders and solvents in a pressurised can for direct spray use. The can is intended for plastic model work, where broad coverage matters more than brush marks or uneven edges. Applied in light coats from about 25 to 30 cm, the spray pattern helps colour reach curves, corners and recessed sections with a more consistent layer build. The 100 ml fill suits full-body coverage as well as smaller repaint jobs and matching detail sections across a build. On the bench, TS-34 Camel Yellow Gloss fits projects that need a strong yellow body colour, a contrasting accent area or a fresh repaint on worn exterior parts. It works well when several plastic components need the same tone across the whole model, keeping the finish visually coherent from the first pass to the final dried coat. Warning! Not suitable for children under 14 years.

TS spray colours

TS-50 Mica Blue Spray Paint, model paint, 100 ml

300085050

€10.491 l = €104.90

TS-50 Mica Blue Spray Paint brings a metallic blue tone to model work in a 100 ml aerosol can, combining quick coverage with a semi gloss finish that suits broad body panels and shaped parts. The spray format helps distribute colour in a fine mist, making it easier to cover contours, edges and recessed sections with a more uniform coat than hand brushing. The paint is specified for plastics, which makes it relevant for many model shells and accessory parts used in hobby building. The mica effect gives the blue shade extra visual depth as light moves across the painted surface, so curved fenders, rooflines and body sides show more variation than a flat solid colour. The can label identifies it as a spray paint for adult modelers only, and the aerosol format is paired with handling guidance such as vigorous shaking and application in light coats. The 100 ml fill size also gives enough material for repeated passes across larger sections where a single heavy coat would be less controlled. For finishing work, TS-13 glossy clear coat can be used over TS-50 when a higher-shine result is wanted. That makes the paint useful for model car bodies, exterior panels and other plastic parts where colour consistency and surface character matter in the final presentation. In a workshop setup, the can suits staged painting sessions with drying time between coats and a final clear layer when a brighter gloss is the goal. Warning! Not suitable for children under 14 years.

TS spray colours

TS-61 NATO Green Flat, spray paint, 100 ml

300085061

€10.491 l = €104.90

TS-61 NATO Green Flat is a 100 ml spray paint for model finishing, supplied in a ready-to-use aerosol can for broad, even coverage on plastic parts. The flat NATO Green tone gives military subjects and other subdued paint schemes a matte surface that reduces visible brush streaks and helps large areas read as one consistent color. This TS paint belongs to the special acrylic resin spray range for model use. The aerosol format is especially useful on body shells, hull sections, armor panels and other shaped components where a brush can leave overlaps at edges and corners. A sprayed coat can settle more evenly across recessed lines, raised details and curved surfaces, which helps preserve the look of molded structure after painting. The 100 ml volume also gives enough material for repeated finishing sessions or for covering multiple assemblies, depending on the size of the parts being painted. On the workbench, the can suits builders who want a fast route to a uniform base color before adding markings, weathering or detail accents. It also fits restoration or touch-up work on existing model projects where a flat military green shade needs to match the rest of the finish. Warning! Not suitable for children under 14 years.

TS spray colours

TS-86 Brilliant Red, paint spray, 100 ml

300085086

€11.491 l = €114.90

TS-86 Brilliant Red is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover larger surfaces with an even colour coat. The bright red shade suits full body shells, broad panels and other parts where a smooth, continuous finish gives the model a clean overall look. The aerosol format is especially useful when a brush would slow down coverage across wide sections. One can contains enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a clear guide for planning a complete paint job. After the main coat has been applied, enamel and acrylic paints can be used for smaller details and picked-out sections because the spray layer is not affected by those paint types. That makes it easier to separate the main body colour from trim lines, lights, frames or other fine accents added later. On the bench, TS-86 Brilliant Red supports a straightforward workflow: broad areas first, then detail painting once the main surface has cured. It fits model projects that need a strong solid red finish across exterior shells, whether the goal is a clean road-car look or a vivid racing style.

Polish, cleaners, aging materials

Weathering Master C, weathering set for model kits

300087085

€13.291 kg = €1,582.14

Weathering Master C brings 4 focused finish tones into one model-making set for adding worn metal and rust effects to static builds. Rust, Orange Rust, Gun Metal and Silver sit side by side in a compact case, making it easy to move between oxidised surfaces, dark metallic shading and bright edge accents while working across armour, vehicles or scenic details. The dry weathering format is intended for representing ageing and use in model building rather than broad paint coverage. An applicator and brush are included for controlled pickup and placement, so small areas such as corners, seams, exhaust surrounds or tool marks can be treated with more precision. Gun Metal and Silver help pick out exposed edges and rubbed contact points, while the 2 rust shades support layered corrosion effects from darker staining to fresher orange deposits. The grouped layout also helps keep colour choices consistent when returning to the same build over several sessions. On a tank hull, the tones can be worked into hatches, bolts and track guards; on a car or aircraft, they can define panel wear, heat-marked metal and chipped sections. The set also suits diorama surfaces where machinery, barriers or industrial details benefit from restrained metallic contrast and weathered colour variation. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-24 Clear Yellow Gloss, acrylic paint, 23 ml

€5.491 l = €238.70

XF-59 Flat Desert Yellow is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, muted desert shade. The matte character keeps the colour restrained on military subjects, field equipment and scenery sections, where a dry surface look suits sand, dust and sun-faded tones. The acrylic formula suits careful colour placement on smaller model parts and shaped surfaces where controlled application matters. XF-59 can be used to establish a base desert tone, refine panel sections or bring separate assemblies into the same colour family during painting work. The flat finish also supports weathered visual effects, because the subdued surface avoids the reflective look that can distract from camouflage schemes and service-worn details. On diorama elements, the beige-brown tone works well for arid ground sections, crates, barriers and other terrain accents that need a dusty appearance. At the workbench, the 23 ml jar is easy to keep alongside other finishing supplies for repeat use across several painting stages. It fits naturally into projects that move between body sections, accessories and scenic details, especially when one consistent desert shade is needed across the whole model.

XY acrylic colours

XF-9 Hull Red, acrylic paint, 23 ml jar

€3.591 l = €359.00

XF-60 Flat Dark Yellow brings a muted, matte colour tone to model finishing in a compact 10 ml jar. The acrylic paint format suits careful application on smaller sections, where controlled coverage and clean colour placement matter during detailing, touch-ups or staged paintwork on scale subjects. The Flat Dark Yellow shade works especially well where a non-gloss surface is needed, giving panels, equipment sections or accent areas a restrained look rather than a reflective finish. In a paint range, XF-60 also serves as a clearly identified reference for repeat use across matching builds or later corrections. The 10 ml volume keeps the jar easy to store alongside other hobby colours and straightforward to add into a planned paint set for ongoing bench work. On the work surface, this paint fits naturally into finishing sessions that move between base coating, small corrections and colour blocking on individual parts. The compact jar size also makes it practical for keeping specific tones ready for follow-up work when an earlier model needs a precise colour match or a fresh matte layer.

XY acrylic colours

XF-65 Flat Field Grey, acrylic paint, 23 ml

300081365

€5.491 l = €238.70

XF-65 Flat Field Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the exact XF-65 shade code. The flat grey tone gives scale builds a subdued, non-gloss colour layer that suits military subjects, equipment details and carefully matched retouching on painted sections. The acrylic formula is suited to controlled brush application on smaller parts, edges and surface details where a clearly defined colour matters. The 23 ml volume keeps the jar practical for repeated workshop use while remaining easy to store alongside other coded shades in a paint rack or tool drawer. The exact Flat Field Grey designation also helps when a build calls for a specific colour reference rather than a general grey. Hazard labelling with flame and exclamation symbols indicates that the paint should be handled with appropriate care. On the bench, XF-65 can be used during main colour application, for detail passes on accessories and panels, or later in the build when small corrections are needed to keep tones consistent. The jar format also makes it easy to reopen the same shade for follow-up work on matching parts in future projects.

Primers

Metal Primer Clear 100ml, model paint primer

300087061

€11.391 l = €113.90

Metal Primer Clear 100ml is a spray undercoat for metal parts used in model making and finishing work. The clear formula prepares bare metal surfaces before painting, helping later coats settle on a properly primed base while keeping fine shapes and mechanical detail visible. The can is intended for undercoating metal components such as photo-etched parts, die-cast sections, brackets and similar modelling pieces where paint adhesion needs extra support. Applied as a preparatory layer, it gives colour coats a more dependable surface than untreated metal alone. The spray delivery also helps reach corners, edges and recessed areas on irregular parts, which is useful when working with small fittings or shaped components. With 100 ml in the can, the primer fits regular bench use for multiple painting sessions and detail jobs. In a modelling workspace, it slots in before the main paint stage: metal parts are primed first, then finished in the chosen colour once the surface is ready. It also suits mixed-material builds where selected metal details need their own undercoat before final assembly or display finishing.

Polish, cleaners, aging materials

Polishing Compound Sponges, model finishing set

300087192

€6.49

Polishing Compound Sponges bring controlled finishing to painted model surfaces with 3 sizes that suit different sections of the body. The small, medium and large sponge shapes help place polishing compound accurately on broad areas, narrow borders and tighter corners, so paint correction stays focused instead of spreading across nearby detail. Each sponge combines a working face with an integrated grip section that makes handling more stable during careful finishing passes. Compared with a cloth, the sponge format gives more exact contact on edges and around colour boundaries, which helps avoid rubbing away paint from raised corners or mixing colours at borders. The set contains 1 small sponge, 1 medium sponge and 1 large sponge, giving a clear size choice for different stages of surface work. On the workbench, the sponges suit final paint-job refinement after curing, touch-up polishing on local marks, or careful compound application around panel lines and trim edges. After use, the sponges can be washed and reused, ready for the next model finishing session with the same controlled feel.

PS spray colours

PS-12 Silver, polycarbonate spray paint, 100 ml

300086012

€10.991 l = €109.90

PS-12 Silver brings a metallic silver finish to polycarbonate model bodies in a 100 ml aerosol can, giving RC shell projects a colour option matched to this specific surface type. The spray format supports direct application to clear body panels, where an even coat and consistent coverage matter across curved fenders, roofs and side sections. The can is identified as Tamiya Color for polycarbonate, with PS-12 marking the exact shade reference for repeat purchases and matching across multiple builds. This is a spray paint for model use rather than a general craft coating, so the formula is positioned around polycarbonate shell work in the modelling bench setup. The silver tone suits race-inspired liveries, single-colour finishes and layered custom schemes where metallic brightness is part of the visual effect. The 100 ml net volume gives a clear quantity reference when planning one shell or several smaller paint jobs. On the bench, PS-12 Silver fits the stage where a clear body takes on its final character through colour, whether the goal is a clean competition look or a reflective custom finish. It can be kept alongside other model finishing supplies as a dedicated polycarbonate spray option for repeat RC body projects. Warning! Not suitable for children under 14 years.

PS spray colours

PS-34 Bright Red, polycarbonate spray paint

300086034

€10.991 l = €109.90

PS-34 Bright Red brings a bold colour finish to polycarbonate model bodies, with a spray format that suits broad side panels, curved roof sections and detailed body contours. The 100 ml can gives hobby paint work a compact format that stores easily on the bench while keeping a clearly identified shade under the red cap. The can is labelled for polycarbonate, which matters when a bodyshell calls for a paint type matched to that material rather than a general craft coating. Bright Red suits racing-inspired colour layouts, single-colour shells and touch-up work on existing model bodies where a vivid solid tone is needed. The aerosol format helps lay colour across larger sections without brush marks, while still reaching recessed lines and tighter corners around body shapes. Made in Japan, PS-34 sits within Tamiya's PS paint range for model finishing tasks tied to polycarbonate parts. On an RC workbench, the can fits naturally into body preparation and finishing sessions where colour choice, material match and clean coverage all matter. It also works well as a shelf-ready refill shade for hobby spaces that keep frequently used body colours close at hand. Warning! Not suitable for children under 14 years.

TS spray colours

TS-27 Flat White, spray paint, 100 ml aerosol

300085027

€10.491 l = €104.90

TS-27 Flat White is a 100 ml spray paint designed for model finishing, combining a flat white tone with aerosol application for broad, even coverage on plastic surfaces. The special acrylic resin formula is made for hobby use, where smooth colour laydown across shaped parts, larger panels and curved sections helps keep the finish consistent. The can delivers paint as a fine spray rather than a brush-applied coat, which makes it useful for covering shells, body parts and other model components with fewer visible stroke marks. The Flat White shade works well where a matte white surface is needed for clean colour separation, solid coverage or a neutral base before further detailing. As an aerosol paint, it is classified as extremely flammable and as a pressurised container. Use only outdoors or in well-ventilated areas, avoid inhaling spray mist, and protect the can from heat and direct sunlight above 50°C. On the workbench, TS-27 suits builders finishing scale models, refreshing painted sections or preparing parts for additional masking and colour work. The 100 ml fill gives a practical amount for repeated hobby use across multiple painting sessions. Warning! Not suitable for children under 14 years.

TS spray colours

TS-42 Light Gun Metal, spray paint, semi gloss

300085042

€10.491 l = €104.90

TS-42 Light Gun Metal is a special acrylic resin spray paint for model finishing, supplied in a 100 ml aerosol can. The semi gloss Light Gun Metal shade gives plastic model surfaces a metallic look with a controlled sheen that avoids the fully flat or mirror-gloss appearance often used for different effects. The aerosol format helps lay down colour across wider panels and shaped exterior sections in a continuous coat, which is useful on body shells, fairings, covers and other visible parts where an even surface matters. As part of the TS paint range, this shade is suited to model painting tasks that call for a darker metallic tone. The can is labelled for plastics, aligning it with common model-building materials used in hobby kits. When a brighter top finish is wanted, the BasicText specifies TS-13 glossy clear coat as the matching overcoat for a glossy surface finish. On the bench, TS-42 fits projects where metallic bodywork, trim sections or equipment housings need a darker gun metal appearance. It also works well in finishing stages where a spray-applied coat is preferred over brush application for smoother coverage across larger visible areas. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-13 Metallic Blue Gloss, acrylic paint, 10 ml

300081513

€3.591 l = €359.00

X-13 Metallic Blue Gloss brings a bright metallic blue tone to plastic model building, with a gloss finish that catches light across curved panels, trim pieces and small accent parts. The 10 ml jar size suits careful, measured paint use on projects where colour placement and surface effect need close control. As part of the X-Acrylic paint range, this colour is identified as X-13 and is intended for plastic model work. The paint is supplied as a liquid and the safety data identifies it as a glossy special acrylic resin paint mixture with pigments, binders and solvents. That composition supports even coverage on small model sections and makes the shade useful for selective painting rather than broad-area coating. The metallic effect gives flat moulded parts a more finished appearance once colour is applied, especially where edges, contours and raised details benefit from reflected light. On a body shell, cockpit detail, fairing section or trim piece, the gloss metallic surface can shift the visual character of a build with a single colour choice. The compact jar format also makes it practical to keep a dedicated shade on hand for later corrections, matching work or added detail during an ongoing modelling project.

XY acrylic colours

X-19 Smoke, acrylic paint, gloss finish 10 ml

300081519

€3.591 l = €359.00

X-19 Smoke brings a glossy, translucent dark tone to plastic model building, giving clear parts, panel areas and selected body sections a deeper finish with controlled brush application from the 10 ml jar. The formula is identified as an X-Acrylic resin special paint for plastic model building, combining binder, pigments and solvents in a liquid paint mixture. The safety data names a flash point of 31-33 °C and a density of 1.0 g/ml at 23 °C. Solvents are partly water-soluble, and the listed boiling range is 80-120 °C. These technical details place the paint clearly in the hobby finishing stage, where measured application and drying conditions matter as much as colour choice. The glossy Smoke effect works especially well when a build needs subtle darkening rather than an opaque coat. On the bench, the 10 ml size fits focused jobs such as framing clear windows, toning lenses or adding depth to vents and recesses on a body shell. Use in well-ventilated areas is stated in the safety data, and eye protection is specified for handling. For model makers refining a painted build, X-19 Smoke adds a distinct finishing option that can shift a surface from flat colour to layered visual detail.

XY acrylic colours

X-19 Smoke, acrylic paint, gloss finish 23 ml

€3.491 l = €349.00

LP-11 Silver gloss is a 10 ml paint bottle for model finishing, bringing a bright metallic silver tone to parts that need a reflective surface and a crisp gloss look. The compact bottle size suits careful, measured use at the workbench, where small quantities are often enough for trim, accents and selective repainting. The LP paint designation places this colour within a dedicated paint range for modelling, making it a practical choice when a build calls for a specific metallic shade rather than a general-purpose coating. Silver gloss can be used to pick out visual breaks between panels, highlight shaped details or refresh worn-looking sections on an existing model. The 10 ml content also helps keep colour selection flexible, since individual bottles can be chosen by finish and shade for the exact stage of a project. On the bench, LP-11 fits tasks such as detail painting on body sections, adding metallic contrast to selected components or refining small areas after the main colour has been applied. The bottle format keeps the paint ready for focused hobby sessions where precision, colour control and a defined gloss finish matter.

Lacquer colours

LP-24 Semi Gloss Clear, lacquer paint, 10 ml

300082124

€3.491 l = €349.00

LP-24 Semi Gloss Clear brings a controlled lacquer finish to model painting work, with a 10 ml bottle size that suits careful application on smaller sections and detail-focused tasks. The semi gloss effect gives painted surfaces a measured sheen that sits between matt and high gloss, helping colour coats and markings read clearly under light without a mirror-like look. Used as a clear finishing layer, LP-24 can help bring separate painted areas into a more consistent visual finish across a build. The lacquer paint format makes it relevant for hobby benches where clear coating, touch-up work and final surface treatment are part of the painting process. The bottle format keeps the quantity focused on precise jobs rather than large-volume coverage, which suits trim pieces, body details and selected panels on scale subjects. On the workbench, LP-24 fits naturally into painting sessions that move from colour application to final surface refinement. It can be used when a model needs a clear layer with moderate sheen, whether the aim is to finish a newly painted section, refresh a small area or give markings and painted parts a more unified appearance.

Lacquer colours

LP-3 Flat Black, paint, 10 ml bottle

300082103

300081504

€3.591 l = €359.00

X-4 Blue Gloss brings a strong blue tone and a reflective finish to brush-painted model work, giving small surfaces, trim areas and selected panels a clean colour accent. The acrylic resin paint is supplied in a 10 ml jar, a practical size for detail painting, touch-ups and shorter bench sessions where a full tin would be more than needed. The paint is identified in the data as a glossy brush paint for plastic model building, making it suited to controlled application on parts that benefit from a brighter surface sheen. Its liquid format allows measured loading on the brush for narrow edges, smaller components and separated colour zones. The blue shade can be used to define contrast against neighbouring colours, pick out individual sections or refresh worn painted spots on an existing build. The compact jar also stores easily alongside other colours in a modelling setup. On the workbench, X-4 Blue Gloss fits naturally into projects that move between assembly, detailing and finishing, especially when a model needs precise colour placement rather than broad coverage. It also works well for revisiting small areas after handling, masking or final fitting, keeping the finish consistent across the completed model

XY acrylic colours

XF-4 Yellow-Green, acrylic paint, 23 ml

300081304

€5.491 l = €238.70

XF-4 Yellow-Green is an acrylic paint for model finishing, supplied in a 23 ml jar that fits neatly into a bench setup for regular painting sessions. The Yellow-Green tone brings a clear, vivid colour note to body details, accessories and other painted sections where a defined shade matters. The acrylic formula suits careful brushwork on smaller areas and controlled coverage across broader sections, giving builders a practical option when a project calls for clean colour placement. The jar format keeps the paint ready for repeated use across separate stages of a build, whether the task is initial colour application, later touch-up work or matching an earlier painted section. In a paint range, the XF-4 designation also helps identify the exact shade quickly when several colours are in use on the workbench. On a model bench, the 23 ml size works well for ongoing projects that return to the same colour more than once. It also fits neatly into finishing routines where detail parts, trim areas and small assemblies are painted separately before final installation.

XY acrylic colours

XF-50 Flat Field Blue, acrylic paint, 23 ml

300081350

€5.491 l = €238.70

XF-50 Flat Field Blue is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss appearance. The muted Field Blue shade suits painted equipment, accessory parts and selected body details where a cooler, restrained tone fits the overall scheme on a scale project. The paint is identified as blue in the technical data and is supplied as a liquid, which supports measured application on smaller surfaces and controlled edge work around raised detail. The safety data sheet lists a flash point of 33°C and classifies the contents as flammable liquid category 3, so handling belongs in a well-ventilated workspace with appropriate care. Density is listed at about 1.2 g/mL at 23°C, giving a concrete reference for the paint's liquid format and jar content. The same document also identifies the mixture as causing serious eye irritation and as harmful if inhaled. On the bench, XF-50 fits jobs such as painting stowage, fuel cans, field accessories or selected panels that call for a matte blue note rather than a reflective finish. The 23 ml size also works well when a specific shade is needed for repeat touch-ups across several sessions without moving to a larger paint volume.

XY acrylic colours

XF-54 Flat Dark Sea Grey, acrylic paint, 10 ml

300081754

€3.591 l = €359.00

XF-54 Flat Dark Sea Grey is an acrylic brush paint in a 10 ml jar, created for scale finishing where a restrained matt grey is needed instead of a reflective surface. The shade suits military subjects, naval details and equipment sections that call for a darker sea grey tone with a flat look. As a liquid paint, XF-54 supports careful brush work on smaller areas, panel sections and fine raised detail where controlled placement matters. The acrylic formulation gives model builders a dedicated colour option for adding contrast between neighbouring parts or refining a paint scheme with a specific grey rather than a generic mixed tone. The compact jar format keeps the colour easy to store with other modelling supplies and simple to reach for during repeat touch-ups on the same build. The naming stays precise within the XF range, which helps when matching a planned colour callout on a kit or reference sheet. On ships, vehicles, aircraft details or scenic accessories, this shade can be used to block in darker sections, sharpen painted boundaries or adjust the balance of a camouflage layout. It also fits bench sessions focused on small corrections, layered finishing work or adding a flat grey accent after the main colours are already in place.

XY acrylic colours

XF-57 Flat Buff, acrylic paint, 10 ml jar

300081757

€3.591 l = €359.00

XF-57 Flat Buff is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a yellow-brown shade with a flat surface appearance. The subdued tone suits painted details that need an earthy, dusty or faded look rather than a reflective finish, whether on vehicle panels, stowage parts or scenic sections. Within a paint lineup, the XF-57 designation helps identify the exact colour quickly when a build calls for repeatable shade selection across several sessions. The acrylic medium lends itself to careful application on smaller sections where edge control and gradual coverage matter. Flat Buff can be used to break up larger colour areas, add dry-looking tonal variation or support weathering effects on military subjects, utility vehicles and diorama elements. The 10 ml quantity also fits neatly into organised hobby storage and keeps a frequently used shade close at hand for touch-up work. On the bench, this paint suits detail passes on accessories, equipment and terrain pieces, then returns for later corrections once the main colours are in place. It also works well in finishing stages where a muted yellow-brown note helps surfaces look sun-faded, dusty or field-worn.

XY acrylic colours

XF-65 Flat Field Grey, acrylic paint, 10 ml

300081765

€3.591 l = €359.00

XF-65 Flat Field Grey is an acrylic paint shade for model finishing, supplied in a 10 ml jar for compact bench use and controlled colour selection. The flat grey tone suits subjects that call for a muted, non-gloss surface, whether the goal is uniform coverage on a small section or careful colour placement across detailed parts. Within a paint range, a dedicated shade like XF-65 helps keep colour matching consistent across separate sessions, spare parts and later touch-ups. The 10 ml size is easy to store alongside other modelling supplies and keeps a specific tone ready for camouflage areas, equipment details or weathered surfaces. The acrylic format makes this paint a practical choice for hobby work where measured application and clean shade separation matter. The label identifies the colour directly as Flat Field Grey, which helps when sorting paints by code and tone at the workbench. On military vehicles, field equipment or diorama elements, a flat grey can be used to define panels, accessories and subdued surface areas with a restrained finish. It also fits smaller correction jobs where opening a larger paint volume would be unnecessary.

Primers

Fine Surface Primer L Pink 180ml Spray Primer

300087146

€16.991 l = €94.39

Fine Surface Primer L Pink 180ml is a surface preparation spray for model work on plastic, metal and wood. The pink tone is especially suited to use beneath red paint, giving bright colour coats a base that helps them read cleaner and with more consistency across the finished surface. The formula is useful when seam lines need filling and when scratches show up in small or awkward sections that need closer control. In those spots, the primer can be applied with a modeling brush, which makes it easier to work around edges, corners and recessed details without flooding the surrounding area. As a preparatory coat, it helps even out the surface before colour is added, so the next paint layer sits on a more uniform foundation. The 180 ml can supports repeated use across larger builds or several smaller assemblies where multiple parts need the same undercoat. On a car body, aircraft panel or accessory part, the pink base can be laid down before red paint to support a stronger final tone. It also suits repair work between build stages, where a corrected seam or sanded mark needs another primer pass before the next coat is sprayed. Warning! Not suitable for children under 14 years.

Polish, cleaners, aging materials

Gloss Coating Varnish 10ml, model finish

300087151

€10.291 l = €1,029.00

Gloss Coating Varnish 10ml adds a clear finishing layer to painted gloss surfaces, bringing out stronger luster while helping to keep fingerprints from marking the final appearance. On darker colours, the coating gives added visual depth, so black, deep blue or racing red panels read with a fuller shine under display lighting. The water-based formula is described as a surface polish and comes in a 10 ml bottle for hobby finishing work. It can be applied with a cloth, which suits broad body sections, fairings and other smooth painted areas where an even wipe-on coat is useful. Beyond boosting gloss, the coating also helps mask small abrasions and fine scratches that can appear during handling. The liquid is colourless and transparent, with a pH value of 7.0 ±0.5 at 25 °C and a relative density of 1.00 at 20 °C. One bottle is enough for roughly 15 models in 1:24 scale, making it a practical bench companion for repeated builds and refresh work between display sessions. After decals, paint curing and final polishing, the varnish supports a cleaner finished look on cars, bikes and other painted scale subjects. Warning! Not suitable for children under 14 years.

Lacquer colours

LP-19 Gun Metal, paint, gloss finish 10 ml

300082119

€3.491 l = €349.00

LP-19 Gun Metal brings a dark metallic shade to scale finishing, with a gloss surface that gives painted sections a clean reflective edge under workshop light or on a completed display model. The 10 ml jar size suits focused paint work where controlled quantity matters, especially on smaller assemblies and detail zones. Within the LP-Paint range, this colour is positioned for metallic areas that need a deeper tone than bright silver. Gun Metal works well on mechanical-looking sections such as housings, trim pieces, vents or structural details where a darker metal appearance fits the subject. The compact jar format is easy to store alongside other finishing supplies and practical for repeat touch-up work across separate stages of a build. The label identifies the shade as LP-19, making it straightforward to match with build notes or colour callouts. On a model bench, the gloss finish helps metallic details stand apart from flat surrounding colours and gives small painted parts a more defined visual break. During restoration, repainting or fresh assembly work, the 10 ml volume supports precise use on selected areas rather than broad coverage.

Lacquer colours

LP-4 Flat White 10 ml, lacquer paint

300082104

€3.491 l = €349.00

LP-4 Flat White is a lacquer paint in a 10 ml jar, made for scale model finishing where a flat white tone is needed on small parts, trim sections or surface details. The compact jar format keeps the paint close at hand on the workbench and suits careful application during painting sessions that focus on precision rather than broad coverage. Within the LP paint range, this shade adds a dedicated flat white option for builders planning consistent colour layouts across separate assemblies. A lacquer paint like LP-4 is suited to detail-led work where edges, recessed areas and small visual accents need a controlled, even tone. The 10 ml content also fits projects that call for selective use rather than large-volume coating, such as cockpit details, markings, panel sections or correction work during a finishing stage. On military models, motorsport subjects or custom builds, a flat white shade can define contrast without adding shine. The jar format supports repeated bench use across multiple sessions, whether the task is refining a livery, picking out interior parts or adding final colour notes to a display model.

Lacquer colours

LP-60 NATO Black Flat 10 ml, paint for models

300082160

€3.491 l = €349.00

LP-60 NATO Black Flat is a 10 ml model paint for finishing scale builds with a muted black tone. The flat finish keeps reflections low on painted sections, which suits military colour layouts, equipment details and darker accent areas where a gloss effect would look out of place. The LP-Paint designation places this shade within a dedicated paint range for model work, and the compact 10 ml bottle suits targeted applications rather than broad coverage. Small panels, accessories and touch-up areas can be painted with a colour that stays visually restrained on the surface. The shade name NATO Black points to a military-style black rather than a deep glossy display finish, which helps when matching subdued vehicle schemes and field equipment details. The label and hazard symbols identify it clearly as a chemical paint. On the workbench, this colour fits finishing stages where dark tools, trim sections, stowage parts or selected body details need a flat black appearance. It also works for repainting small worn spots on an existing build when the surrounding finish calls for a non-shiny surface. Careful storage and handling are required during use.

Lacquer colours

LP-63 Titanium Silver, paint, gloss 10 ml

300082163

€4.591 l = €459.00

LP-63 Titanium Silver is a gloss paint for model finishing, supplied in a 10 ml jar and focused on a bright metallic silver tone. The colour suits builds that need a clean reflective effect on selected sections, whether the goal is a full painted surface or smaller highlighted areas that catch the light differently from surrounding tones. Within a paint setup, this shade works well when a build calls for a cooler metallic note rather than a flat grey or plain silver look. The gloss surface changes how edges, panel lines and shaped parts read once the paint has dried, giving contours a sharper visual break. The compact 10 ml quantity also fits neatly into targeted paint planning, where one specific colour is needed for trim, mechanical details or controlled refinishing work. The product data identifies LP-63 as Titanium Silver gloss, making it easy to match the exact shade again in later repair or continuation work. On the workbench, the jar size supports short finishing sessions, detail passes and colour corrections on model parts without committing to a larger volume. It also suits keeping a dedicated metallic shade on hand for repeat use across separate projects where the same silver tone is needed.

Lacquer colours

LP-70 Gloss Aluminum, lacquer paint, 10 ml

300082170

€4.591 l = €459.00

LP-70 Gloss Aluminum brings a bright metallic lacquer finish to model painting in a compact 10 ml jar. The gloss aluminum tone suits trim, mechanical details and selected body sections where a reflective metal effect sharpens the overall look of a build. This paint belongs to the LP lacquer range and is identified as LP-70 in the series. The supplied safety data names it as a paint for plastics, making it relevant for many common model parts and accessories. The formula is a solvent-based mixture with pigments and binders, and the hazard labeling on the container marks it as flammable and as requiring careful eye and vapor handling. The data sheet also states a flash point of -3 °C and notes that the paint is practically insoluble in water. These technical properties matter during storage, ventilation and application planning at the workbench. Used on exterior accents, cockpit sections or exposed mechanical areas, the gloss aluminum shade can create crisp contrast against darker colors and help small molded details read more clearly. The 10 ml size fits touch-up work, focused detailing and single-build paint planning where a full-size paint supply is not required.

PS spray colours

PS-16 Metallic Blue, polycarbonate spray paint

300086016

€10.991 l = €109.90

PS-16 Metallic Blue brings a reflective blue finish to polycarbonate model surfaces in a 100 ml aerosol can, making it a focused choice for RC bodyshell painting and other compatible hobby applications. The spray format supports fast, even coverage across broad panels, roof sections and curved contours that are awkward to coat with a brush. This paint is specified for polycarbonate, so the material match is clear when planning colour work on transparent shells and formed body parts. The PS-16 colour code also helps when a build or repaint calls for the same shade again on a replacement shell or a second body. Metallic pigment changes the look of the surface as light moves across edges, arches and raised details, which gives shaped panels more visual depth than a flat solid tone. The 100 ml can size keeps the format compact on the workbench while still offering enough paint for dedicated modelling tasks. In practical use, PS-16 fits the stages where a shell has been prepared and is ready for colour, whether the goal is a fresh race body, a repaired panel section or a matching repaint for an existing model. It also works well as part of a planned finishing setup where several coded colours are used across different bodyshell areas. Warning! Not suitable for children under 14 years.

PS spray colours

PS-2 Red, polycarbonate spray paint, 100 ml

300086002

€10.991 l = €109.90

PS-2 Red is a spray paint for polycarbonate model bodies, supplied in a 100 ml can for hobby finishing work on RC shells and other compatible clear body parts. The red shade gives body panels a strong, clean colour presence that reads clearly across curved surfaces and larger sections alike. The polycarbonate-specific formulation makes this paint relevant where the body material matters, especially on shells that need a coating matched to that substrate rather than a general craft paint. In aerosol form, the paint can be applied across roof sections, side panels and wheel arch areas with steady passes that suit broad exterior coverage. The 100 ml volume gives a practical amount for body painting tasks while keeping the can compact in the workshop. PS-2 Red also fits colour-led custom builds where a single solid tone forms the base for further detailing, masking or racing-style graphics. On the bench, the can suits preparation for RC body finishing, touch-up work on compatible painted sections, or a fresh colour scheme for a new shell. In a model workshop setting, the red tone stands out on track-inspired designs and gives custom body projects a clear visual focal point. Warning! Not suitable for children under 14 years.

PS spray colours

PS-59 Dark Metallic Blue, polycarbonate spray paint

300086059

€11.991 l = €119.90

PS-59 Dark Metallic Blue is a spray paint for polycarbonate model bodies, created for finishing RC shells with a darker metallic tone and an even sprayed coat. The 100 ml can gives model builders a practical format for covering broad body sections while still keeping control over narrower areas such as roof lines, side panels and curved fenders. The polycarbonate-specific formula suits clear bodyshell work where a sprayed finish needs to follow the shell's contours cleanly. Dark Metallic Blue brings a cooler, deeper colour note than a flat blue, so panel shapes and body lines stay visible as the shell moves under changing light. The aerosol format also helps distribute colour across larger surfaces in a continuous pass, which is useful when working around arches, cabin sections and rear decks on RC car bodies. Used as part of a custom livery, PS-59 fits full single-colour paint jobs as well as darker accent sections on racing and off-road shells. On the bench, the 100 ml volume gives enough material for planned paint sessions without moving to bulk containers, and the spray can stores neatly with other finishing supplies between body projects. Warning! Not suitable for children under 14 years.

TS spray colours

TS-46 Light Sand Flat Spray Paint, 100 ml Can

300085046

€10.491 l = €104.90

TS-46 Light Sand Flat is a 100 ml acrylic resin spray paint for model finishing, combining a muted sand tone with the speed and reach of an aerosol can. The flat finish gives painted parts a dry, low-sheen surface that suits military subjects, desert vehicles and weathered details on larger sections where brush marks would interrupt the look. This TS paint is supplied as a ready-to-spray aerosol, so coverage is applied directly from the can rather than mixed for airbrush use. The safety data identifies it as an extremely flammable aerosol in a pressurised container, with hazard labelling for skin and eye irritation and for respiratory effects, so use belongs outdoors or in a well-ventilated area. The visible can format also keeps the colour code TS-46 easy to identify on the workbench when several shades are in rotation during a paint session. On armour builds, field equipment, scenery parts or body details, Light Sand Flat works where a subdued earth tone is needed across wider surfaces and repeated shapes. The 100 ml fill supports multiple passes on model components, touch-up stages between coats, or keeping one dedicated shade on hand for ongoing finishing work. Warning! Not suitable for children under 14 years.

TS spray colours

TS-48 Gunship Grey Flat, spray paint, 100 ml

300085048

€10.491 l = €104.90

TS-48 Gunship Grey Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can for broad, even coverage across larger sections and shaped parts. The Gunship Grey tone and flat finish suit subjects that call for a muted surface, from aircraft panels to military equipment details and mechanical bodywork. This special acrylic resin spray is intended for plastics and gives builders a practical way to cover surfaces that are slower to finish with a brush. The aerosol mist helps reach curves, edges and recessed shaping with a more consistent coat across the same section. The can is labelled TS-48 within the TS paint range, making the shade easy to match when a build calls for a specific colour reference. Hazard pictograms on the can identify it as a flammable aerosol and indicate careful handling during use and storage. On the bench, the 100 ml volume suits repeated work across multiple assemblies, touch-ups on larger model sections, or a full colour stage on a single build. It fits naturally into painting sessions focused on armour, aircraft, sci-fi subjects or utility vehicles where a flat grey finish supports realistic surface character. Warning! Not suitable for children under 14 years.

TS spray colours

TS-62 NATO Brown Flat, spray paint, 100 ml

300085062

€10.491 l = €104.90

TS-62 NATO Brown Flat is a 100 ml spray paint for model finishing, giving plastic surfaces a muted brown coat with the speed and reach of an aerosol can. The flat colour suits military subjects, field accessories and weathered details where a low-sheen surface helps preserve the scale look across broader areas. This TS series paint is described as a special acrylic resin spray, combining pigments, binder and propellant in a pressurised can for direct application. The aerosol format helps cover larger sections more evenly than hand brushing, which is useful on body shells, armour panels and terrain parts with repeated edges or recessed shapes. The colour reference TS-62 keeps the shade easy to match within a planned paint scheme or touch-up workflow. The can contains 100 ml net volume, giving enough material for multiple passes depending on the size and shape of the painted parts. Used on model kits and hobby components, the spray suits bench sessions where broad, consistent colour coverage matters as much as the final tone. For handling, the safety data states that the aerosol is extremely flammable, the container is pressurised and should not be exposed to temperatures above 50°C, so application belongs in well-ventilated work areas with careful storage between sessions. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-21 Flat Base, acrylic paint, 10 ml bottle

300081521

€3.591 l = €359.00

X-21 Flat Base is an X-Acrylic paint for plastic model building, supplied in a 10 ml bottle for controlled bench use on smaller painting jobs, detail areas and measured paint mixes. The compact bottle size keeps the amount manageable when a project calls for precise handling rather than large-volume coverage. The paint belongs to the X-Acrylic range and is identified as X-21 Flat Base, making it easy to match within an established hobby paint system. The safety data names it as a liquid acrylic resin special paint and lists a density of 1.0 g/ml at 23 °C. The same data also states a boiling range of 80 to 120 °C and a flash point of 31 to 33 °C. For workshop handling, the label information specifies use in well-ventilated areas and eye protection during application. On the workbench, the 10 ml format suits careful dispensing into palettes, mixing cups or small paint trays for scale modelling sessions. It also stores efficiently alongside other coded colours in the X-Acrylic line, helping keep paint selection orderly during ongoing build, finishing and touch-up work.

XY acrylic colours

X-32 Titanium Silver Gloss, acrylic paint, 23 ml

300081032

€6.291 l = €273.48

X-32 Titanium Silver Gloss brings a bright metallic tone to scale model painting, with a 23 ml jar sized for repeated use across detail sections, trim lines and larger highlighted areas. The glossy titanium silver colour gives parts a reflective finish that changes the look of bodywork, mechanical elements and accent pieces with a clean, crisp sheen. This X-Acrylic paint is identified in the data as a liquid brush paint for model making. The mixture contains binders, pigments and solvents, and the safety data lists a density of 1.0 g/ml at 23°C, a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The paint is described as silver in colour with an alcohol odour. For use, vapour and aerosol should be avoided, and application belongs in open air or well-ventilated rooms. The container should be kept tightly closed and stored in a cool, ventilated place away from heat and ignition sources. On the workbench, the 23 ml volume supports touch-ups, repeated coats and colour matching across several model sections. The metallic gloss tone suits exterior trim, engine details and other parts that benefit from a brighter silver finish. Eye protection is stated for handling, and the jar format keeps the paint ready for measured brush loading during careful model painting sessions.

XY acrylic colours

XF-10 Flat Brown, acrylic paint, 10 ml

300081710

€3.591 l = €359.00

XF-10 Flat Brown is an acrylic paint in a 10 ml format, giving scale modelling work a defined brown tone for detail areas, small sections and controlled colour application. The flat finish keeps the surface non-gloss, which suits subjects where a muted painted look is needed rather than a reflective coat. Within the XF acrylic range, the XF-10 code identifies Flat Brown clearly and helps keep colour selection consistent across different builds. The 10 ml size fits neatly into a modelling setup and supports measured use when painting accessories, interior sections or selected exterior details. The shade can be used where brown tones are needed on vehicles, scenery elements or diorama parts, depending on the subject being finished. The visible hazard labelling indicates that the paint should be handled with appropriate care during modelling work. On the bench, XF-10 Flat Brown suits careful brush application on smaller parts and touch-up work after main colour stages are complete. It also fits projects where a flat brown tone is needed to break up larger painted areas with contrast and more specific surface detail.

XY acrylic colours

XF-49 Flat Khaki, acrylic paint, 10 ml

300081749

€3.591 l = €359.00

XF-49 Flat Khaki brings a muted flat colour tone to model finishing in a compact 10 ml format that fits neatly into the paint rack and the regular rhythm of bench work. As an acrylic paint, it suits hobby painting tasks where controlled application, small-area coverage and consistent colour placement matter, from detail accents on parts to touch-up work during a longer build. The Flat Khaki shade works especially well where a subdued, non-gloss surface is needed for realistic military, field or utility styling. The XF designation places it within Tamiya's acrylic paint range, making it a clear match for builders who organise colours by series and shade code. The 10 ml volume is easy to keep on hand for repeat use on matching components, scenic sections or later corrections. The label code XF-49 also helps identify the exact colour quickly when a project calls for the same tone again. On the workbench, this paint suits careful brush application on smaller sections as well as planned colour steps within a broader finishing session. It also fits stash building for model makers who keep specific shades ready for vehicles, figures, equipment and terrain details across multiple projects.

XY acrylic colours

XF-52 Flat Earth, acrylic paint, 10 ml

300081752

€3.591 l = €359.00

XF-52 Flat Earth is an acrylic paint in a 10 ml jar, offering a compact format for model finishing, colour correction and carefully placed brushwork. The Flat Earth tone reads as a subdued brown, making it a useful choice where painted surfaces need a soil-like, field-worn or terrain-based look rather than a brighter decorative finish. Within a modelling setup, this shade can support groundwork, vehicle details and selected figure areas that call for an earthy colour note. The 10 ml size keeps the jar easy to store alongside other paint references while still giving enough material for repeated small-scale applications. The XF designation identifies the exact shade within the range, which helps keep colour planning consistent across multi-step painting sessions. The acrylic paint format suits controlled work on edges, recesses and smaller sections where gradual coverage is often preferred over flooding a surface. On the bench, XF-52 Flat Earth fits naturally into weathering passes, terrain painting and touch-up work after assembly or base coating. The visible hazard pictograms show a flame symbol and an exclamation mark, indicating flammable contents and the need for careful handling during use and storage. In a collection of modelling supplies, this jar adds a clearly defined brown reference for projects that call for grounded, natural-looking colour placement.

XY acrylic colours

XF-58 Flat Olive Green, acrylic paint, 23 ml

300081358

€5.491 l = €238.70

XF-58 Flat Olive Green is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-58 shade code. The flat olive green tone suits military subjects, field gear and scenery sections where a muted surface reads more convincingly than a gloss coat, whether the paint is used for broad coverage or small corrective passes. The paint is listed in the safety data as a liquid with an alcohol odour and an approximate density of 1.2 g/ml at 23°C. The same document states a flash point of 33°C and classifies the mixture under CLP with H226, H319, H332 and H336. That makes the handling context clear: use in well-ventilated areas and keep the jar away from heat, sparks and open flames. For bench work, the brush-paint format helps place colour on edges, stowage details, panel sections and other small features where controlled application matters. On a workbench, the 23 ml volume fits neatly into regular painting sessions, from base coating selected parts to refining worn equipment tones and blending scenery details. XF-58 also works as a practical reference shade when matching touch-ups across separate assemblies in the same build.

XY acrylic colours

XF-66 Flat Light Grey, acrylic paint, 10 ml

300081766

€3.591 l = €359.00

XF-66 Flat Light Grey is an acrylic paint in a 10 ml jar, sized for precise work on scale builds where a muted grey tone suits smaller sections, touch-ups and carefully controlled coverage. The flat finish keeps reflections low, helping painted details sit naturally alongside mechanical parts, interior areas and weathered surfaces. The XF designation identifies this shade within the Tamiya paint range, which helps when a build calls for the same colour again across separate sessions. The compact jar format stores easily with other workshop supplies and keeps a clearly marked colour ready for repeat use on model kits and accessories. Hazard pictograms shown on the label indicate flammable contents and a general warning for handling, so the paint belongs in a well-organised hobby setup with appropriate care during use. On the bench, this shade suits fine detail passes, small corrections after assembly and selective finishing on parts that need a restrained grey rather than a glossy coat. It also works well when a project calls for consistent colour placement across several components, keeping the visual result even and measured.

XY acrylic colours

XF-66 Flat Light Grey, acrylic paint, 23 ml

300081366

€5.491 l = €238.70

XF-66 Flat Light Grey brings a muted, non-gloss colour tone to model painting, with 23 ml in a jar sized for repeated bench use across detail work, touch-ups and broader finishing passes. The acrylic paint format supports controlled handling on small parts, where clean edges and steady coverage matter as much as the final shade. The Flat Light Grey colour fits a wide range of scale subjects, from interior sections and equipment pieces to body details that call for a subdued painted surface rather than a reflective one. On layered paint schemes, this tone helps separate adjacent areas with a softer visual break than darker greys. The 23 ml content gives enough volume for recurring use within longer projects, whether the task is refining a single component or returning to the same colour across several stages of a build. The code XF-66 also keeps the shade easy to identify when matching an existing paint plan. On the workbench, this paint suits careful brushwork on edges, recesses and smaller fitted parts, while the flat finish supports scale scenes where a low-sheen appearance looks more convincing. It also works well for keeping a consistent grey tone available across ongoing model and accessory projects.

XY acrylic colours

XF-68 Flat NATO Brown, acrylic paint, 23 ml

300081368

€5.491 l = €238.70

XF-68 Flat NATO Brown is an acrylic paint for model finishing, supplied in a 23 ml jar for compact storage and measured use at the workbench. The flat colour tone gives painted surfaces a subdued appearance that suits military subjects, equipment details and weathered sections where shine would look out of place. The XF series designation helps identify the shade clearly when planning a paint set or returning to the same colour for later touch-ups. Acrylic paint is well suited to controlled application on smaller areas, where edges, accessories and surface sections benefit from careful colour placement. The 23 ml volume fits projects that call for repeated detail painting without taking up much space among other finishing supplies. The colour name Flat NATO Brown also makes the intended tone easy to recognise when building camouflage palettes or muted earth-tone combinations. On the bench, this paint suits builders working through body details, stowage parts, interior sections or terrain elements that need a brown shade with a flat finish. It also works well for keeping a dedicated military palette organised, with the jar size and XF-68 code easy to read during longer painting sessions.

Diorama texture colours

Epoxy Putty Quick Type, 2-component modeling putty

300087051

€7.491 kg = €299.60

Epoxy Putty Quick Type is a 2-component modeling putty for shaping, modifying and repairing parts in model making. The white and beige compound is supplied as 2 separate sticks that are kneaded together before application, creating a workable mass for filling gaps, building up missing areas and forming new contours on plastic model surfaces. The Quick Type formulation suits bench work that benefits from a faster-setting putty, whether the task is reworking a panel line area, fabricating a small detail or correcting a join. With 25 g in the pack, the quantity fits focused hobby jobs without opening a large batch. The material is intended for re-modeling, detail fabrication, sculpturing, modifications and repairs, which makes it useful across scratchbuilding, conversion work and restoration of damaged sections. The stick format also helps with measured portioning, since only the required amount needs to be mixed for each stage. At the workbench, the putty can be pressed into seams, shaped over altered sections or formed into added features before finishing the surrounding area. It suits model projects that need clean corrections, extra surface detail or rebuilt edges where the original part no longer matches the planned shape. Warning! Not suitable for children under 14 years.

Primers

Fine Surface Primer L, spray primer, Oxide Red

300087160

€16.491 l = €91.61

Fine Surface Primer L in Oxide Red is a spray primer designed for model surfaces and sized for repeated workshop use with its 180 ml can. The oxide red shade suits AFV subjects such as tanks especially well, because it creates a believable base layer for finishes that show wear, exposed edges and worked metal. The formula is intended for plastic and metal, so the same can can prepare different parts within one build before colour coats are added. Its fine spray pattern helps the primer settle across flat armour plates, curved sections and small raised details with a more uniform starting layer. When chipping and weathering techniques remove parts of the top coat, the red oxide undercoat remains visible in a way that matches the look often associated with military vehicles. The same base layer also influences later paint application by giving top colours a deeper, richer cast. On the bench, this makes the primer useful both at the start of a fresh paint job and during more advanced finishing plans built around layered wear. It suits builders working on single vehicles as well as those preparing several subassemblies in sequence, where one consistent undercoat helps keep the final finish visually coherent. Warning! Not suitable for children under 14 years.

Lacquer colours

LP-21 Italian Red, paint jar, gloss 10 ml

300082121

€3.491 l = €349.00

LP-21 Italian Red is a gloss paint in a 10 ml jar, suited to model finishing where a clean red coat and a reflective surface are part of the final look. The compact jar format keeps the colour easy to store on a workbench and easy to reach during detail painting, body accents or small-area corrections. The shade name points to a strong red tone that fits classic racing schemes, trim sections and visual highlights on scale subjects. The gloss finish gives painted areas a smoother, brighter appearance than a flat coat, which helps colour breaks, panel details and accent parts stand out more clearly. The 10 ml content also suits controlled use on smaller sections where measured paint application matters. Where a build uses several red elements across separate stages, the jar format keeps the same colour ready for repeat passes and later touch-ups. On a modelling bench, LP-21 Italian Red fits naturally into body painting, cockpit detailing and finishing work on parts that need a polished red surface. It also works well for keeping a specific red tone available for ongoing projects, repair work after handling, or fresh visual contrast on selected components.

Lacquer colours

LP-40 Metallic Black, lacquer paint, 10 ml

300082140

€3.491 l = €349.00

LP-40 Metallic Black brings a gloss lacquer finish and a darker metallic tone to model painting work, with 10 ml in the bottle for focused application on selected parts, trim sections or smaller surface areas. The LP-Paint designation places this colour within Tamiya's lacquer paint range, giving builders a specific reference when planning a finish scheme or matching later touch-up work. The Metallic Black shade combines black coverage with a reflective effect that changes the look of panels and details under light, making it useful where a plain solid black would read flatter. The gloss finish supports a smoother visual result on exterior surfaces and detail parts that benefit from a polished appearance. The compact 10 ml size also fits projects that call for a single defined colour rather than a larger paint volume. The bottle format keeps the paint easy to store alongside other modelling supplies between painting sessions. On car bodies, motorcycle parts, aircraft details or other scale components, LP-40 can be used to define contrast areas, darker metallic sections and trim elements within a broader colour layout. It also suits bench work where a named lacquer shade is needed for repeatable finishing across separate stages of the same build.

Lacquer colours

LP-44 Metallic Orange, paint, gloss finish 10 ml

300082144

€4.491 l = €449.00

LP-44 Metallic Orange brings a bright gloss finish to scale modelling work, with a metallic orange tone that catches light across body panels, trim pieces and small detail areas. The 10 ml jar format keeps the paint compact on the workbench and easy to reach during focused finishing sessions. This paint is identified in the data as brush paint, making it suited to controlled application on edges, recesses and smaller components where precise placement matters. The gloss finish gives the colour a smooth, reflective look, while the metallic effect adds visual depth that reads differently on flat panels and shaped surfaces. Used on model car parts, accessories or detail sections, the orange shade can define accents, pick out separate components or refresh selected areas without opening a larger paint format. The jar size also makes it practical for touch-up tasks and smaller-scale colour work. On a hobby desk, LP-44 fits neatly into paint racks, tool trays or compact storage beside brushes and mixing tools. During a build or repaint session, the metallic orange tone can be used for custom highlights, replacement parts or visual contrast on selected sections of a scale subject.

Lacquer colours

LP-52 Clear Red Gloss, lacquer paint, 10 ml

300082152

€3.491 l = €349.00

LP-52 Clear Red Gloss brings a transparent red lacquer finish to model painting, with a 10 ml content size that suits detail-led work on smaller parts and carefully controlled colour application. The clear formula lets surface structure remain visible beneath the colour layer, creating a tinted effect that works especially well where depth and shine need to appear together. Within the LP paint range, this shade supports finishing tasks that call for a translucent red rather than an opaque coat. It can be used to build colour gradually over prepared surfaces, to adjust the tone of selected sections, or to pick out visual details that benefit from a glossy, light-catching look. The lacquer format makes it a dedicated choice for model makers who plan colour placement step by step and want a distinct clear shade in the paint rack. On a workbench, LP-52 Clear Red Gloss fits naturally into projects with lenses, signal details, decorative inserts or layered colour effects. The compact bottle stores easily alongside other finishing colours and is ready for sessions focused on refinement, correction and final visual accents.

Lacquer colours

LP-59 Flat NATO Brown, lacquer paint, 10 ml

300082159

€3.491 l = €349.00

LP-59 Flat NATO Brown is a lacquer paint for scale model finishing, supplied in a 10 ml jar and matched to a subdued brown tone used across military subjects and equipment details. The flat surface helps painted areas sit down visually, so panels, tools and stowage parts avoid unwanted gloss and keep the finish closer to the look often sought on service vehicles. Within a paint rack, this shade works as a dedicated color rather than a mixed approximation, which helps keep camouflage sections consistent across separate sessions. The 10 ml content suits focused application on selected areas, whether the task is blocking in a base section, refining smaller components or returning later for touch-up work on the same build. The LP designation and the LP-59 code also make the color easy to identify when several browns are used side by side for layered finishing. On armored vehicles, field equipment and diorama accessories, Flat NATO Brown can be used to define contrast between neighboring tones and to break up larger painted surfaces with a more realistic military palette. It also earns its place on the bench for repeat jobs such as repainting tools, crates or external fittings where a stable, named shade matters from one model to the next.

Lacquer colours

LP-62 Titanium Gold, paint, gloss 10 ml

300082162

€4.591 l = €459.00

LP-62 Titanium Gold brings a bright metallic gloss finish to scale modelling work where trim, fittings and accent sections need a more defined visual break than a flat colour can provide. The 10 ml jar size keeps the paint easy to store and practical to reach for during detail painting sessions at the workbench. The Titanium Gold shade is suited to small-area application, where metallic contrast can pick out moulded lines, raised sections or decorative parts with more clarity. As part of the LP paint range, it serves finishing tasks that call for a controlled amount rather than a large-volume coating step. The gloss character gives reflected light a cleaner response on painted details, which helps gold elements stand apart from surrounding colours. The compact format also makes it useful for touch-ups and repeat use across separate model projects. On vehicle models, figures or display builds, this paint can be used to define selected components and add a sharper metallic note to the overall colour layout. It also fits bench sessions focused on correction work, final detailing or adding contrast after the main colours are already in place.

PS spray colours

PS-15 Metallic Red, polycarbonate spray paint

300086015

€10.991 l = €109.90

PS-15 Metallic Red is a spray paint for polycarbonate model bodies, bringing a vivid metallic finish to RC shells and other clear formed parts. The aerosol format pairs the colour with quick, broad application, so large roof sections, side panels and curved fenders can be coated with a steady pass rather than brush strokes. The formula is specified for polycarbonate, which matters when painting flexible clear bodies used in model building. With 100 ml in the can, the volume suits full-body colour work as well as smaller repaint jobs on replacement shells or selected sections. Metallic Red gives the surface a brighter, more reflective look than a flat tone, so pressed lines and shaped contours read more clearly once the body is mounted. The spray can format also helps reach recessed areas, wheel arch curves and long side sections with a consistent coat. In a hobby workspace, PS-15 fits naturally into body finishing before decals and final assembly. It can be used when refreshing a well-run shell, matching a replacement body to an existing chassis, or setting a bold colour base for a new RC build. Warning! Not suitable for children under 14 years.

PS spray colours

PS-62 Pure Orange, polycarbonate spray paint

300086062

€11.491 l = €114.90

PS-62 Pure Orange is a spray paint developed for decorating transparent polycarbonate bodies used in R/C car modeling. The colour is applied from the inside of the body shell, so the outer surface keeps its smooth finish while the orange tone shows through the clear material during running, display and body detailing. The 100 ml can is sized for finishing a model body and supports additional coats after curing when stronger colour density is required. For application, the spray can is held about 30 cm from the surface, which helps distribute paint across broad roof sections, side panels and tighter curves without pressing the nozzle too close to the shell. After curing, the paint is impervious to oil and fuels. That makes it suitable for gas-powered R/C bodies that are exposed to fuel residue during use. This paint is intended for polycarbonate bodies only and must not be used on plastic models. In a workshop setup, PS-62 Pure Orange suits fresh body finishing, colour changes and replacement shells prepared for track sessions. It also fits detailed livery work where a bright solid base colour is needed before further masking or follow-up coats are added. Warning! Not suitable for children under 14 years.

TS spray colours

TS-19 Metallic Blue Spray Paint, Model Finish

300085019

€10.491 l = €104.90

TS-19 Metallic Blue brings a metallic blue semi gloss finish to plastic model surfaces in a 100 ml aerosol format, giving shells, body panels and exterior parts a clean, even colour layer with the visual depth that metallic paint adds under light. The TS paint range is formulated as a special acrylic resin spray, making it suited to hobby finishing where smooth colour application matters across shaped surfaces. The aerosol can supports light, repeated passes over larger sections, which helps maintain a more uniform coat on curved panels, fairings and body contours. The metallic pigment gives the blue tone a brighter, reflective character than a flat colour, while the semi gloss finish keeps the surface short of a full high-shine look. For a glossier result, the product data recommends TS-13 glossy clear coat over the colour layer. The can is labelled for plastic model use and carries 100 ml net volume. This paint suits model car bodies, motorcycle fairings and other plastic kit parts that benefit from even spray coverage and a metallic finish. In a hobby workspace, it fits the stage where assembled or prepared parts move into colour finishing, whether covering a full bodyshell or refreshing selected exterior sections with a consistent blue tone. Warning! Not suitable for children under 14 years.

TS spray colours

TS-2 Dark Green Flat, spray paint, 100 ml

300085002

€10.491 l = €104.90

TS-2 Dark Green Flat is a 100 ml spray paint for plastic model surfaces, combining a deep muted green tone with the quick, even application of an aerosol can. On larger shells, body panels or grouped parts, the flat finish reduces shine and gives painted sections a more scale-like appearance under workshop light. This colour belongs to the TS range of special acrylic resin sprays used in model finishing. The spray format helps cover broad areas more uniformly than hand brushing, which is especially useful on curved panels, body shells and repeated parts that need the same tone across the whole build. The dark green shade suits military subjects, utility vehicles and classic colour layouts where a matte surface supports the visual character of the model. The 100 ml fill offers a practical amount for planned paint sessions on plastic components. On the bench, the can suits builders preparing exterior parts before decals and final detailing, or refreshing a single body section in the same colour family. In hobby use focused on plastic kits and RC bodyshells, TS-2 Dark Green Flat adds a controlled sprayed coat that keeps the finish understated while letting panel lines and shapes remain clear. Warning! Not suitable for children under 14 years.

TS spray colours

TS-41 Coral Blue Gloss, spray paint, 100 ml

300085041

€10.491 l = €104.90

TS-41 Coral Blue Gloss is a 100 ml spray paint from the TS range, made for model finishing with a bright gloss colour that reads between coral blue and light turquoise on the cap and can marking. The aerosol format lays colour across larger surfaces quickly, which suits body panels, shells and other shaped parts where an even visual flow matters. The paint is identified in the range as TS-41 and belongs to the acrylic resin spray line shown in the safety data sheet as Spezial-Acryl-Harz-Spray TS-Farben. As a ready-to-spray can, it removes the need to decant or mix colour before use and helps keep coverage consistent across repeated passes on matching parts. The gloss finish gives edges, curves and raised details a cleaner light catch than a flat coat, which can make panel lines and colour blocking read more clearly on completed models. The 100 ml fill also gives enough material for multi-part painting sessions or for carrying the same shade across several sections of one build. On a workbench, TS-41 suits full-colour body coverage, contrasting trim sections or standout accent areas that need a vivid gloss tone. The spray-can format also fits builders who want one coded shade ready for touch-ups, repeat projects or coordinated finishing across separate model components. Warning! Not suitable for children under 14 years.

TS spray colours

TS-44 Brillant Blue Gloss, spray paint, 100 ml

300085044

€10.491 l = €104.90

TS-44 Brillant Blue Gloss brings a vivid blue gloss finish to plastic model surfaces in a 100 ml aerosol can. The ready-to-spray format suits larger sections where an even colour layer matters, such as bodyshells, fairings or broad exterior panels on scale builds. The TS paint range is described as a special acrylic resin spray, with pigments, binders and solvents in a pressurised can. That composition is built for direct spray application rather than brush work, making it useful when a project calls for continuous colour across curved or recessed shapes. The can is labelled for plastics, which makes it relevant for many model kits and RC bodyshell projects that use formed synthetic parts. The gloss finish adds a reflective surface character to the Brillant Blue shade instead of a flat or satin look. On the bench, TS-44 fits painting stages where a single, consistent colour coat defines the outer appearance of the build. The 100 ml fill gives practical volume for one or more model painting sessions, depending on the size and number of parts being coated. As an aerosol paint, it should be handled according to the stated precautions and used only outdoors or in well-ventilated areas. Warning! Not suitable for children under 14 years.

TS spray colours

TS-53 Deep Metallic Blue, spray paint, 100 ml

300085053

€10.491 l = €104.90

TS-53 Deep Metallic Blue brings a rich metallic blue tone to model painting in a 100 ml aerosol can, making it well suited to broad, even colour application on hobby surfaces. The semi gloss finish gives the colour a subtle sheen straight from the can, with metallic particles adding visible depth across curved panels and larger sections. This spray belongs to the TS paint range and is described as a special acrylic resin spray for model use. The aerosol format supports fast coverage on parts where brush marks would interrupt the finish, and it suits projects that need a consistent tone across multiple sections. For a glossier final appearance, TS-13 glossy clear coat can be used over the dried colour layer. The paint is supplied in a pressurised can, and the label identifies it as a flammable aerosol for adult modelers only. It fits naturally into body finishing, colour changes, and restoration work on hobby builds where a deep metallic blue is the target shade. Used in light coats across prepared surfaces, the spray can help create an even visual result on shells, panels, and other larger components that benefit from smooth colour coverage. Warning! Not suitable for children under 14 years.

TS spray colours

TS-71 Smoke Transparent Gloss Spray Paint 100ml

300085071

€10.491 l = €104.90

TS-71 Smoke Transparent Gloss is a spray paint for model finishing that combines a transparent smoke tone with a gloss surface, making it suited to tinted effects on clear parts and darker visual accents across larger assemblies. The synthetic lacquer formula cures in a short time, so broad surfaces can move on to the next stage without a long wait at the bench. The 100 ml aerosol format is designed for model work where an even coat matters across body shells and other wide sections. One can is stated to cover 2 or 3 car model bodies in 1:24 scale, which gives a practical guide when planning a full paint session. The paint is not affected by acrylic or enamel paints, so different paint types can be used in sequence on the same build. That makes it easier to add smaller colour areas, trim details or highlighted sections after the main smoke coat has been applied and dried. In use, TS-71 suits model car bodies, clear sections and other parts that benefit from a darker transparent finish with gloss depth. It fits neatly into finishing work where the main surface is sprayed first and finer accents are added later with a brush, helping keep large areas smooth while leaving room for precise detail painting. Warning! Not suitable for children under 14 years.

TS spray colours

TS-84 Metallic Gold Gloss, spray paint, 100 ml

300085084

€24.991 l = €249.90

TS-84 Metallic Gold Gloss is a spray paint for model finishing that combines a metallic gold tone with a glossy surface in a 100 ml aerosol can. The synthetic lacquer formula cures in a short time, which helps move larger painting stages along when body shells, panels or other broad parts need an even coat. The paint is described for large model surfaces, where a spray pattern can cover wide areas more efficiently than brush application. One can is stated as enough to fully cover 2 or 3 car model bodies in 1/24 scale, giving a concrete reference point for planning a full build or a repaint project. The formula is not affected by acrylic or enamel paints, so detail colours can be added after the main coat has been applied and cured. For work with TS-83 Metallic Silver and TS-84 Metallic Gold, the stated recommendation is a base of TS-14 Glossy Black primer. On the bench, this makes TS-84 a strong choice for full body painting, matching separate detail stages to a metallic main colour without changing paint systems mid-build. It suits car bodies, exterior panels and other larger parts where a uniform metallic gloss matters as much as colour depth. The 100 ml format also keeps the paint quantity clear when planning materials for one shell or several 1/24 scale bodies. Warning! Not suitable for children under 14 years.

XY acrylic colours

X-5 Green Gloss, acrylic paint, 23 ml jar

300081005

€5.491 l = €238.70

X-5 Green Gloss brings a vivid green tone and a reflective finish to plastic model building, with 23 ml of acrylic paint in a compact jar for detailed colour work at the bench. The glossy surface catches light on selected sections, giving trim, panels and accent areas a cleaner, more defined look once the paint has dried. This paint belongs to the X-Acrylic range and is identified as X-5 Green Gloss, making it easy to match with build notes, colour plans or repeat purchases for the same scheme. The formulation is described for plastic model building, so it fits the finishing stage where separate parts, body sections or small details need a specific colour rather than a broad all-over coat. The jar format keeps the paint ready for measured use during touch-ups, partial repainting or careful brush application on confined areas. The supplied quantity of 23 ml offers enough material for repeated detailing sessions across more than one stage of a build. On military subjects, road cars, sci-fi kits or custom projects, the green gloss shade can be used to pick out selected components, add contrast beside darker tones or sharpen a planned livery. At the workbench, it supports steady progress when a build calls for a bright, polished colour note on visible model surfaces.

XY acrylic colours

X-8 Lemon Yellow Gloss, acrylic paint, 23 ml

300081008

€5.491 l = €238.70

X-8 Lemon Yellow Gloss brings a bright yellow tone and a reflective finish to plastic model building, with 23 ml in the jar for brush painting, detail accents and visible color separation on small parts. The acrylic resin paint is intended for model work where crisp placement and a glossy surface help trim lines, panels and highlighted sections read clearly. The formulation is a liquid mixture of binders, pigments and solvents. The safety data identifies it as flammable liquid category 3 with a flash point of 31 to 33 °C, and the paint has a density of 1.0 g/ml at 23 °C. Solvent content is stated as 50 to 60%, with partial water solubility noted for the solvent portion. The boiling range is 80 to 120 °C, and the liquid has an alcohol-like odor. These technical details place X-8 within a workshop painting setup where measured handling and controlled ventilation matter during model finishing. On the bench, the 23 ml jar suits repeated use across body details, accessories and small exterior sections that need a strong yellow gloss. It fits focused painting sessions for scale kits, touch-up work on existing builds and careful color application on parts that benefit from a smooth, light-catching surface.

XY acrylic colours

XF-22 RLM Flat Grey, acrylic paint, 23 ml

300081322

€5.491 l = €238.70

XF-22 RLM Flat Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the exact shade name RLM Flat Grey. The flat finish gives painted surfaces a subdued look that suits scale subjects where gloss would appear out of place, whether the work focuses on aircraft panels, vehicle fittings or small accessory parts. The XF designation places this colour within Tamiya's acrylic paint range, making it a straightforward choice when a build calls for a specific grey rather than a general neutral tone. The 23 ml volume fits regular bench use, with enough paint on hand for detail work, corrections and matching separate sections within the same scheme. On smaller components, a defined colour like XF-22 helps keep visual consistency between main surfaces and secondary parts that are painted at different stages. This shade works well in painting sessions that move between broad base areas and finer accents, especially when a model includes recessed details, edges and add-on parts that benefit from a non-gloss finish. Kept alongside other modelling colours and tools, XF-22 RLM Flat Grey serves as a dedicated reference shade for repeat builds, touch-ups and careful finishing work.

XY acrylic colours

XF-23 Flat Light Blue, acrylic paint, 23 ml

300081323

€5.491 l = €238.70

XF-23 Flat Light Blue is an acrylic paint in a 23 ml jar, made for adding a flat light blue finish to scale models and related hobby work. The matte character of the colour suits surfaces where a low-sheen look keeps panel shapes, edges and small moulded details clearly visible during painting and after drying. The 23 ml quantity gives a practical amount for repeated brush sessions on smaller assemblies, detail zones and colour corrections. Flat Light Blue can be used where a build calls for a pale blue tone on body sections, interior areas, accessories or scenic elements, depending on the subject being finished. The jar format keeps the paint contained between sessions and supports measured use when only a small amount is needed on the brush. As an acrylic paint, it fits hobby workflows that focus on controlled coverage, edge definition and gradual colour build-up on model parts. On the workbench, the shade can be applied to trim, panels or accent areas that benefit from a calm, muted blue rather than a glossy finish. It also suits ongoing projects where a stored colour needs to be reopened later for touch-ups, matching adjacent sections or refining painted details with the same tone.

XY acrylic colours

XF-27 Flat Black Green, acrylic paint, 23 ml

300081327

€5.491 l = €238.70

XF-27 Flat Black Green is a 23 ml acrylic paint for model finishing, bringing a subdued dark green tone to brush-applied details, small panels and carefully controlled colour work. The flat finish keeps the surface visually restrained, which suits technical subjects, military schemes and parts that need a muted rather than reflective look. The XF designation identifies this shade within the acrylic paint range, making it easier to match repeat applications during a longer build or later touch-up work. The 23 ml jar size gives a practical amount for detail sessions, small-area coverage and mixing into established paint routines without taking up much bench space. Flat Black Green can be used where darker green accents, equipment sections or weathered colour transitions are needed. The compact jar format also supports measured paint use during careful finishing steps. On the workbench, this paint fits naturally into projects that move between base colours, detail passes and final surface refinement. It also works well for keeping a consistent dark green note across separate assemblies, replacement parts or later corrections on an existing model.

XY acrylic colours

XF-51 Flat Khaki Drab, acrylic paint, 23 ml

300081351

€5.491 l = €238.70

XF-51 Flat Khaki Drab is an acrylic paint for model finishing, supplied in a 23 ml jar for repeated bench use across detail work, touch-ups and full colour sections. The flat khaki drab tone gives military subjects and equipment parts a restrained surface look that avoids shine and keeps the finish visually consistent on scale builds. The acrylic format suits careful brush application on smaller components, edges and recessed areas where colour control matters. A 23 ml volume gives enough paint for ongoing workshop use while keeping the shade easy to store with other modelling supplies. The XF-51 designation also helps builders return to the same colour quickly when extending a scheme across separate sessions or matching later additions on the same project. On the workbench, this paint suits camouflage sections, stowage details, interior parts and field equipment accents where a muted drab tone is needed. It also works well for correction passes after assembly or for refining individual areas without repainting an entire model.

XY acrylic colours

XF-55 Flat Deck Tan, acrylic paint, 10 ml

300081755

€3.591 l = €359.00

XF-55 Flat Deck Tan is an acrylic paint for model building work, supplied in a 10 ml jar and listed as Light Brown in the product data. The muted tan tone suits projects that call for a restrained, practical colour rather than a bright finish, whether the aim is painting equipment details, adding contrast to panels or refining smaller sections on a build. The acrylic formula makes this paint a useful choice for controlled application on scale parts where neat edges and measured coverage matter. Its compact 10 ml size fits naturally into a modelling paint range, keeping colour selection focused for touch-ups, detail painting and smaller finishing jobs. The shade name Flat Deck Tan points to a flat, non-gloss appearance, which helps maintain a subdued look on surfaces intended to read as worn, functional or understated. At the workbench, this colour can be used during a fresh build, a repaint or later correction work on assembled models and accessories. It also suits sessions where several tones are combined across one project, with Light Brown adding a calm, grounded note beside darker, metallic or camouflage-oriented colours.

XY acrylic colours

XF-58 Flat Olive Green, acrylic paint, 10 ml

300081758

€3.591 l = €359.00

XF-58 Flat Olive Green brings a muted matt olive tone to scale painting work, with a 10 ml jar size that suits detail sessions at the bench and careful colour placement on smaller parts. The acrylic brush paint format supports controlled coverage on accessories, equipment pieces and surface sections where a flat finish helps the painted area sit naturally beside weathering and panel detail. The safety data identifies XF-58 as a liquid paint with an alcohol odour, a density of about 1.2 g/mL at 23 °C and a flash point of 33 °C. It is classified under CLP as Flam. Liq. 3, Eye Irrit. 2, Acute Tox. 4 by inhalation and STOT SE 3. The label therefore calls for use in well-ventilated areas, away from heat, sparks and open flames, with protective gloves and eye protection. The container should be kept tightly closed and stored in a cool, ventilated place. On military subjects, stowage parts and field accessories, the flat olive green shade gives a subdued painted look rather than a glossy coat. The 10 ml volume also fits neatly into colour rotation for touch-up work, small-area repainting and finishing passes on model details where only a measured amount is needed. This paint is intended for model-making use and should be handled with the same care as other flammable hobby coatings.

XY acrylic colours

XF-62 Flat Olive Drab, acrylic paint, 10 ml

300081762

€3.591 l = €359.00

XF-62 Flat Olive Drab is an acrylic paint for model finishing, supplied in a 10 ml jar for compact bench storage and controlled use during detail painting. The flat color tone gives painted surfaces a non-gloss appearance that suits subdued military schemes, field equipment accents and parts that call for a worn, service-style look. The XF designation identifies this specific shade within the acrylic paint range, making it easier to match repeat work across separate builds or later touch-ups. A 10 ml volume fits neatly into paint racks, drawers and hobby cases without taking much space on the workbench. The small jar format also helps when only selected panels, accessories or edge details need color rather than full-surface coverage. The olive drab tone works well where a muted green-brown finish is needed for scale realism. On the bench, this paint suits careful brushwork on accessories, body details and small model sections that benefit from a flat finish. It also serves well for correction work after assembly or for adding tonal variation to selected areas, keeping the painting process focused and easy to manage in shorter hobby sessions.

XY acrylic colours

XF-67 Flat NATO Green, acrylic paint, 23 ml

300081367

€5.491 l = €238.70

XF-67 Flat NATO Green brings a military-style colour tone and a flat surface effect to scale modelling work, with 23 ml of acrylic paint supplied for controlled coverage on parts, panels and smaller painted sections. The muted finish suits subjects that call for a non-glossy appearance, helping camouflage layouts and field equipment details read with the restrained look often associated with service vehicles. The acrylic formula makes this paint a useful choice for careful colour placement on model components where edges, recesses and smaller areas need a defined shade rather than broad decorative coverage. The XF-67 designation also helps keep colour selection consistent across repeat builds, matching sessions or later touch-up work when the same tone is needed again. In a paint rack or work area, the 23 ml jar size fits neatly into regular hobby use while still providing enough material for multiple passes on selected assemblies. On armoured vehicles, support equipment or military-themed accessories, Flat NATO Green can be used to establish base colour areas, refine smaller details or restore worn spots after handling during a build. It also suits bench sessions where several subassemblies are painted separately and then brought together once the colour work is complete.

XY acrylic colours

XF-69 Flat NATO Black, acrylic paint, 23 ml

300081369

€5.491 l = €238.70

XF-69 Flat NATO Black is an acrylic paint for model finishing, supplied in a 23 ml jar that fits neatly into a bench setup and keeps a frequently used dark military shade close at hand. The flat finish gives painted sections a subdued surface appearance, which suits vehicles, accessories and structural details where a non-gloss look is part of the intended result. This shade works especially well when a build calls for controlled dark coverage rather than reflective contrast. The acrylic formula supports careful application on smaller parts, panel sections and detail areas, making it useful for touch-ups as well as broader colour blocking within a paint scheme. The 23 ml quantity offers enough material for repeated use across multiple painting stages while remaining easy to store alongside other workshop colours. The jar format also helps with measured paint pickup during brush work on edges, recesses and raised moulded features. On the workbench, XF-69 Flat NATO Black suits military subjects, equipment details and finishing passes that need a restrained dark tone. It also serves well when refreshing previously painted sections or adding visual separation between neighbouring components in a scale build.

XY acrylic colours

XF-79 Linoleum Deck Brown, acrylic paint, 10 ml

300081779

€3.591 l = €359.00

XF-79 Linoleum Deck Brown is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a flat brown tone that reads with a muted, non-gloss surface. The color suits areas where a restrained finish matters visually, such as deck sections, worn panels or small details that need contrast without shine catching the light. The paint is identified as XF-79 and described as Linoleum Deck Brown Flat, making it easy to place within an existing color range when a build calls for a specific brown rather than a general earth shade. The 10 ml volume supports careful, repeated application across detail stages instead of committing a large container to a narrow color task. In the safety data, the paint is listed as liquid, brown in color and alcohol in odour, with a density of about 1.2 g/mL at 23 °C. The stated flash point is 33 °C. On ship models, military subjects or diorama sections, this shade can be used to separate walking surfaces, deck coverings or equipment panels from surrounding greys, metals and wood tones. At the bench, the small jar format keeps the paint close at hand for touch-ups, edge work and other finishing passes where color control matters as much as coverage.

XY acrylic colours

XF-8 Flat Blue, acrylic paint, 10 ml jar

300081708

€3.591 l = €359.00

XF-8 Flat Blue is an acrylic paint for model work, supplied in a 10 ml jar and identified by the XF-8 shade code. The flat blue finish suits surfaces that call for a non-gloss colour layer, whether the aim is full coverage on a body section or careful colour placement on smaller parts. The supplied safety data identifies this paint as a liquid with an alcohol odour and a blue colour. It lists a boiling range of 82.4 to 174 °C, a flash point of 33 °C and a density of 1.2 g/mL at 23 °C. The same document states a VOC content of 30 Gew-%. For handling, the safety data specifies use in well-ventilated areas and storage in a tightly closed container in a cool, well-ventilated place. The jar format keeps the paint quantity focused for hobby benches where multiple colours are kept within reach. In practical use, this shade fits model painting sessions that move between broader panels, smaller trim sections and later touch-up work. The 10 ml content also makes it easy to keep a specific blue ready for repeat coats, colour corrections or matching details across separate stages of a build.

XY acrylic colours

XF-80 Flat British Navy Gray, acrylic paint

300081780

€3.791 l = €379.00

XF-80 Flat British Navy Gray is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled use on smaller painting jobs and detail-focused colour work. The flat finish gives surfaces a muted, non-gloss appearance that suits military, naval and other scale subjects where a subdued colour tone is part of the final look. The acrylic formula supports careful application across panels, structures and smaller moulded details, making it useful for both broader coverage and targeted corrections. British Navy Gray adds a distinct, service-style shade that can help separate equipment sections, highlight surface features or refine the overall colour balance of a build. The 10 ml content also fits neatly into ongoing workshop use, where matching an existing scheme or completing final finishing steps often calls for a compact paint jar rather than a larger container. On the bench, XF-80 works well for repainting selected areas, adding a uniform flat coat to individual sections or completing detail passes near the end of a build. It also suits stored paint collections where clearly identified shades are kept ready for future model projects and later touch-up work.

XY acrylic colours

XF-92 Yellow-Brown DAK 1941, acrylic paint

300081792

€3.791 l = €379.00

XF-92 Yellow-Brown DAK 1941 is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a flat military shade. The muted Yellow-Brown tone suits armour subjects, equipment details and scene elements where a low-sheen surface is needed instead of a reflective coat. Within the XF acrylic range, this colour supports controlled brush work on smaller sections and measured application across larger painted areas. The DAK 1941 designation places the shade in a historical military context, making it useful for period-correct camouflage, dust-toned panels and field equipment details. The flat finish helps keep the painted result visually restrained, especially on surfaces that call for worn, service-style colour treatment rather than gloss. The compact 10 ml format also fits neatly into a bench setup where several reference colours are used side by side. On a tank hull, supply crate, tool handle or diorama ground detail, XF-92 can be used to build subtle contrast against darker browns, sand tones and green accents. It also works well for touch-up passes after masking or for refining edges and smaller raised sections during the painting stage.

Polish, cleaners, aging materials

Applicator Cloth Set, model polishing cloths

300087090

€19.99

This applicator cloth set brings controlled polishing to plastic model building with 3 soft microfiber cloths sized at 260 x 190 mm. The ultra-fine fabric is intended for use with polishing compound and modeling wax, helping distribute finishing material smoothly across body shells, painted panels and other delicate surfaces while keeping the cloth easy to fold and guide by hand. The set contains 1 blue, 1 pink and 1 white cloth, a practical layout for separating different grades of compound during the finishing process. That color split helps keep coarse, fine and final polishing stages distinct instead of carrying residue from one step into the next. The delicate weave also suits transparent parts, where surface clarity matters just as much as gloss on painted sections. On canopies, windows and light covers, the cloth supports careful hand work with less risk of visible marks from rougher wiping materials. Used at the bench after paint has cured, the cloths fit both broad passes over larger panels and tighter work around edges or molded details. Folded into smaller sections, each cloth can be rotated to a fresh area during longer polishing sessions, keeping the contact surface clean as the finish develops toward a mirror-like result. Warning! Not suitable for children under 14 years.

AS spray colours

AS-16 Flat Light Grey, spray paint, 100 ml

300086516

€12.291 l = €122.90

AS-16 Flat Light Grey brings a matt light grey aircraft colour into a 100 ml aerosol can, giving model builders a ready spray format for broad, even coverage on scale surfaces. The spray action applies paint through the nozzle rather than by brush, which suits wings, fuselage panels and other larger sections where a uniform coat matters. The shade is identified as Flat Light Grey USAF, making it a specific colour choice within aircraft finishing rather than a general workshop paint. The can is labelled as an aerosol paint and the safety data identifies the contents as light grey in colour. This format supports model work that calls for consistent surface tone across multiple adjoining parts. On aircraft builds, that can mean laying down a base colour, refining panel areas or matching surrounding sections during finishing work. Used at the painting stage of a scale build, the aerosol format fits sessions where separate parts are coated before final fitting or where assembled airframes need an overall colour pass. The 100 ml volume gives a practical amount for repeated hobby use across more than one painting session. Warning! Not suitable for children under 14 years.

AS spray colours

AS-18 Flat Light Grey, spray paint, 100 ml

300086518

€12.291 l = €122.90

AS-18 Flat Light Grey (IJA) is a 100 ml spray paint designed for model finishing where an even, subdued grey tone is needed across larger painted areas. The flat finish keeps surfaces non-glossy, which suits subjects that call for a restrained, service-style appearance rather than a reflective coat. The spray format helps distribute paint in a fine, consistent layer over broad sections and shaped parts that are harder to cover cleanly with a brush alone. On aircraft bodies, panels or similar model components, that can help maintain a more uniform colour impression from edge to edge. The AS-18 code also gives builders a clear reference point when following paint guides, planning a specific scheme or returning later for matching work on the same build. The shade name Flat Light Grey (IJA) identifies the intended colour directly, which helps keep finishing steps organised during multi-colour projects. Used during the painting stage of a scale build, this spray suits base coating, full-surface coverage or targeted recolouring of selected sections. In a workshop setup with masking, primed parts and drying space prepared, the 100 ml can supports controlled application across multiple model components in one painting session. Warning! Not suitable for children under 14 years.

AS spray colours

AS-20 Flat Insignia White, spray paint, 100 ml

300086520

€12.291 l = €122.90

AS-20 Flat Insignia White is a spray paint for aircraft models, supplied in a 100 ml aerosol can for broad, even colour application. The flat white tone suits schemes that call for a matt surface, giving model aircraft a clean, uniform finish across wings, fuselage sections and other larger panels. The aerosol format changes how the paint reaches the surface: instead of brush contact, the nozzle releases a fine mist that settles across the model in a thin layer. That makes it useful for covering larger areas where visible brush marks would interrupt the look of the build. The can is part of the Tamiya Color range for aircraft, so the paint sits clearly within aircraft-focused finishing work rather than general craft use. The shade name Flat Insignia White (USN) gives a specific reference point for colour planning on naval aircraft subjects and related markings. On the bench, the 100 ml volume supports more than a single pass, whether the task is laying down a main coat, refreshing a section after masking, or matching white areas across several aircraft builds. The compact can stores easily with other finishing supplies and is ready for use whenever a model calls for a smooth matt white application.

AS spray colours

AS-26 Flat Light Ghost Grey, spray paint, 100 ml

300086526

€12.291 l = €122.90

AS-26 Flat Light Ghost Grey is a spray paint for model finishing, supplied in a 100 ml can and formulated for quick, even colour application across exterior surfaces. The flat finish gives painted parts a muted look, making it suited to builds that call for a low-sheen grey rather than a reflective coat. The spray format helps cover broad sections such as fuselage panels, body shells or other outer parts with a more uniform layer than hand brushing can usually achieve on large areas. Flat Light Ghost Grey works well where a cool, restrained tone is needed for military, aircraft or technical styling, and the matte surface keeps visual emphasis on panel lines, contours and added detail rather than gloss. The can format also makes it practical to apply several light passes during the painting process, which supports controlled coverage on shaped model surfaces. During a build or repaint session, the 100 ml volume gives useful capacity for base coating, follow-up passes and small correction work on separate components. It fits naturally into finishing stages where colour consistency across multiple parts matters, whether the goal is a fresh overall coat or matching previously painted sections on a scale model.

Lacquer colours

LP-53 Clear Orange Gloss, paint, 10 ml

300082153

€3.491 l = €349.00

LP-53 Clear Orange Gloss is a 10 ml paint for model finishing that lays down a transparent orange tint with a glossy surface. The clear colour effect keeps underlying moulded detail, panel lines or base tones visible while shifting the final appearance toward a warm orange hue, which makes it useful where a solid coat would cover too much. The shade suits small parts and focused colour placement on scale builds. Clear orange can be used on lenses, indicators, light covers or selected accent areas where a translucent finish is needed rather than an opaque block of colour. The 10 ml jar size also makes the paint easy to organise alongside other modelling colours and practical for controlled use on smaller sections, touch-ups or repeat passes during a finishing session. On the workbench, LP-53 fits projects that call for tinted gloss effects, from vehicle details to custom highlights on separate components. It also works well when a build needs a transparent colour layer that changes the tone of the surface while leaving fine structure readable underneath.

Lacquer colours

LP-57 Red Brown 2 Flat, lacquer paint, 10 ml

300082157

€3.491 l = €349.00

LP-57 Red Brown 2 Flat brings a muted lacquer colour into model finishing with a 10 ml jar size that suits focused paint work on smaller sections and detail areas. The flat surface effect keeps reflections low, giving painted parts a restrained look that fits subjects where a gloss coat would feel out of place. As part of the LP paint range, this shade adds another controlled colour option for builders working across body sections, cockpit parts, accessories or scenery details. The jar format stores neatly on the workbench and supports measured paint use when only a small amount is needed at a time. The colour name Red Brown 2 points to an earth-based tone that can be used to separate visual zones, pick out individual components or build up layered finishing work across a project. On the bench, this paint suits careful brush work, touch-up passes and other finishing stages where compact paint volume is more practical than a larger container. The 10 ml content also makes it easy to keep a specific shade on hand for repeat corrections, added detail or later refinement during a model build.

Lacquer colours

LP-65 Rubber Black Flat, lacquer paint, 10 ml

300082165

€3.491 l = €349.00

LP-65 Rubber Black Flat brings a dedicated rubber tone to scale painting, combining a flat black base with a slight blue tint that suits tyres, military road wheels and other parts meant to read as rubber rather than plain black. The 10 ml bottle keeps the colour ready for focused bench work, whether the task is picking out a single wheel set or finishing repeated details across a larger build. The lacquer formula works across 2 common application methods: brush painting for edges and small parts, and airbrushing for broader coverage on grouped components. Once applied, it forms a tough membrane that can serve as a basecoat under enamel paints, which helps when a build calls for layered weathering or additional painted detail. Fast drying supports a steady painting rhythm between coats and reduces waiting time during longer finishing sessions. A dedicated thinner is available for painters who want to adapt flow and handling to the chosen technique. With bottle dimensions of 44 mm in height and 35 mm in width, LP-65 fits the same stand format used for the Tamiya Color Acrylic Paint Mini series. On the workbench, that shared footprint helps keep mixed paint ranges organised while wheel sets, suspension parts and other dark-finished components move through the painting stage.

Lacquer colours

LP-7 Pure Red Gloss, lacquer paint, 10 ml

300082107

€3.491 l = €349.00

LP-7 Pure Red Gloss is a lacquer paint for scale modelling, supplied in a 10 ml jar and formulated for a bold red finish with a glossy surface. The Pure Red tone gives body sections, trim pieces and small accessories a bright, defined colour presence that reads clearly on display models and working builds alike. Within the LP-Paint range, this shade is suited to jobs where a clean red layer matters more than a muted or weathered effect. The gloss surface reflects light across edges and contours, which helps shaped parts, raised details and panel lines remain visually distinct after painting. The compact 10 ml content also makes the jar easy to place into a bench setup built around selective colour use, touch-up work or smaller painted sections rather than large-volume coverage. On a model car body, LP-7 can be used to pick out mirrors, trim or accent panels; on accessories and separate components, the same colour can tie scattered details into one consistent scheme. The strong red tone also suits display pieces that need a crisp, freshly finished look, whether the focus is a single highlighted part or a broader colour theme across several assembled sections.

240 of 567 Items

Why choose colours, paints and airbrush systems for Tamiya model kits?

One of the best things about model making is the ability to create your own designs. No matter what colour combination or pattern you have in mind, the colours, paints and airbrush systems for Tamiya model kits allow you to realise your own ideas to their full potential. What’s more, all products are easy to use and made from high-quality materials that provide optimal adhesion.

What should I pay attention to when using model making colours and paints?

To obtain the best possible coating, follow the steps below:

Preparation

Parts for model kits are made using injection moulding or thermoforming machines. For best results, you should “degrease” (i.e. clean) the surfaces before applying any paint. You can do this applying a primer, by sanding the surfaces, or by using special cleaners. The advantage of a primer is that it provides a better adhesive base for subsequent layers of paint. If you notice specs of dust or other particles after applying the primer, you can remove them very carefully with a fine piece of sandpaper (grit size #2000 or finer). Tamiya primers produce ultra-fine droplets, ensuring that engravings remain visible after application. This is the best way to ensure a good result, as Tamiya primers are designed for all Tamiya paint series.

Colour and type of paint

Before applying any paint, think about which colours and finish (matte or glossy) you want for your model. To avoid purchasing the wrong products, you should also decide whether to use airbrush paints, or whether to combine different types of paint. In addition, bear in mind that the type of primer you use has an effect on the paint. For example, if you want to paint your model red, then you should choose the pink primer for best results.

Drying time

Bear in mind that the drying time will vary depending on the type of paint. While the paint is drying, avoid touching freshly painted parts, applying another coating or doing anything else that may affect the new coat of paint. For best results, apply multiple thin coats to ensure a smooth surface.

Accessories

To obtain the best possible result, you’ll also need a set of tools to match your paint and airbrush products. These include fine brushes, airbrush pistols and adhesive templates.

Tamiya paints and airbrush products – overview of product range

Tamiya offers an extensive range of paints, airbrush colours and accessories for decorating your models. The following section provides an overview of the various product categories:

Primers

A premium primer provides the optimal foundation for subsequent coats of paint, as it smooths out any bumps and uneven surfaces and improves the adhesion of the paint. In our shop, you will find an extensive selection of primers for plastic (ABS/PS), metal ceramic and wooden components.

TS spray colours

Tamiya’s TS spray colours are acrylic-based paints that are ideally suited to spraying plastic and RC models (e.g. truck models and functional models) and only require a short drying time.

PS spray colours

PS spray colours are designed for painting polycarbonate chassis (transparent, painted from the inside), and are resistant to both oil and fuel.

AS spray colours

Tamiya’s AS spray paints were specially developed for painting model aircraft and allow you to create subtle shades and precise details.

XF acrylic colours

Tamiya’s acrylic paints are made from water-soluble acrylic resin and can be applied with a brush or airbrush pistol. XF acrylic paints have a matte finish, while X acrylic paints retain a glossy effect after drying.

Diorama texture colours

Our diorama texture colours can be used to create textured surfaces (e.g. for grainy sand, rough concrete, powdery snow or lush grass). The paints can also be mixed with Tamiya XF paints to obtain a different colour.

Lacquer colours

Made from artificial resin, Tamiya’s lacquer paints have a very fast drying time, are highly scratch-resistant, and can be applied with an airbrush pistol.

Polish, cleaners and ageing materials

Our shop also sells a range of polishes, cleaners and ageing materials, including polishes for different finishes, special cleaning utensils, and pens and powdery colours for creating a realistic weathered look.

Brushes and accessories

Under brushes and accessories, you will find an extension selection of premium brushes for applying paints and lacquers, as well as practical accessories such as mixing palettes and pipette sets.

Airbrush systems

If you’re interested in working with airbrush systems, take a look at the Airbrush section of our online store, where you will find a selection of airbrush pistols, attachments, holders and air control valves.

Colours, paints and airbrush systems – paint your models in stunning colours

With Tamiya’s extensive range of colours, paints and airbrush systems, you can customize your model with your very own designs. Be creative and make your colour dreams come true with Tamiya paints and airbrush systems!

Destination	P&P
Germany	4.99 euro	Free shipping from 25,- euro.
EU-Countries	12.99 euro	Free shipping from 75,- euro.

Zone 1 NON-EU
Ziel	P&P
Switzerland	12.99 euro	Delivery is duty and tax unpaid. Free shipping from 75,- euro.
Liechtenstein	12.99 euro	Free shipping from 75,- euro.
United Kingdom	12.99 euro	Free shipping from 75,- euro.

Destination	P&P
Germany	2,99 euro	Free shipping from 25,- euro.
EU-Countries	4,99 euro	Free shipping from 75,- euro.

Destination	P&P
Germany	18,- euro	Free shipping from 25,- euro.
EU-Countries	25,- euro	Free shipping from 75,- euro.