Model-making tools
Maximise your precision and efficiency with our high-quality model kit tools! Whether files, tweezers or cutting tools: at Tamiya you will find everything you need for exact details and perfect results in your construction projects. You can find out more about our tools here.
Model-making tools
40ml Square Bottle Holder, model accessory, 80x80mm
300087202€3.89
This 40 ml Square Bottle Holder adds a simple layer of control to model-building work by surrounding a square bottle with a PE sponge frame sized at 80 x 80 x 12 mm. The snug fit helps limit tipping if the bottle is knocked during cement application, keeping the work area steadier while parts, tools and materials are spread across the bench. The holder is intended for the 40 ml square bottles used for modeling cement and similar aids, so the bottle sits within a cutout rather than balancing on its own base. That extra support matters most during close brush work, when a hand, sleeve or tool can catch the bottle edge. The PE sponge material keeps the format light and easy to place, and the single-holder design makes it easy to position one bottle exactly where the current build needs it. An included tab also allows multiple holders to be linked together for a more ordered arrangement of bench liquids. On a busy workbench, the holder helps separate cement from painted parts, decals and unfinished assemblies by giving the bottle a defined place. It also suits longer building sessions where the same adhesive is picked up and set down repeatedly, keeping the bottle stable and close to the active work area.
Model-making tools
A3 Cutting Mat, hobby work surface, 450 x 320 mm
300074076€27.49
This A3 cutting mat creates a clean, measured work zone for model building and paper craft, with a 450 x 320 mm surface that sits slightly larger than A3 paper. The green 2 mm mat gives knives and similar tools a dedicated base while helping keep the desk underneath clear during trimming, marking and layout work. Its 3-layer structure combines a harder inner layer with softer outer layers. That construction is designed so cut ends remain less conspicuous, and it also helps the blade stay sharp for longer during repeated use. The front side is printed with a dense set of practical guides, including grids, angled lines, R curves and circular lines. These markings support alignment, spacing and repeatable shapes when preparing sheet material, planning cuts or checking symmetry on small parts. The reverse side uses a plain solid color, which changes the mat from a measured cutting surface into a simpler backing for other bench tasks. On a hobby desk, that makes it easy to move between precise knife work, template placement and general craft handling without changing the work area. The format suits model supplies, paper sheets and other flat materials that benefit from a stable, clearly defined surface.
Model-making tools
A4 Cutting Mat, hobby craft mat, 320 x 225 mm
300074118€16.79
This A4 cutting mat brings a measured, stable work surface to model making and paper craft, with a 320 x 225 x 2 mm format that sits neatly on the bench while still extending slightly beyond standard A4 paper. The green surface carries printed reference markings that keep trimming, alignment and layout work clear at a glance. The front side combines a 1 cm grid, 10-degree angle guides, a 1 mm step ruler, curved markings and circular references, giving one surface for straight cuts, angled lines and repeated shape work. A 3-ply structure places a hard inner layer between softer outer layers, a construction designed to leave cut traces less conspicuous and help preserve blade sharpness over longer use. The reverse side is plain, so the mat can be turned over when a clean surface suits the task better. The printed markings are intended as guides, and precise measurement work should still be checked with dedicated measuring tools. On the bench, the mat supports jobs such as trimming sheet material, cutting paper patterns, preparing masking shapes and setting out small model parts before assembly. It should be stored flat and kept away from high temperatures to help prevent warping over time.
Model-making tools
Angled Round Tip Tweezers, Craft Tool, Steel
300074108€18.49
These angled round tip tweezers bring clear sightlines and controlled handling to close-detail work. The bent tip profile helps approach small parts from the side instead of directly above, which can make placement easier when working in confined areas or around raised details. The steel body gives the tool a precise, clean feel, while the broad flat grip section supports stable finger placement during slow, exact movements. The round tip form is suited to delicate handling where a sharp point would be too aggressive, making it useful for lifting, turning or settling fine materials into place. In model making, the angled shape can help when positioning markings, adjusting miniature components or guiding small pieces into narrow openings. The slim profile also suits electronics handling and other bench tasks that call for careful control over tiny parts. On a hobby desk, these tweezers fit naturally alongside assembly, finishing and detail correction work. They support steady placement during miniature builds, careful repositioning during surface detailing, and neat handling whenever fingertips are too large for the job. Warning! Not suitable for children under 14 years.
Model-making tools
Angled Tweezers, model tool, stainless steel
300174003€12.99
These angled tweezers bring precise control to close-up model work, with bent fine tips that make it easier to reach small parts and place decals where a straight tool can get in the way. The angled form keeps the working point visible during careful positioning, which helps when aligning tiny pieces on detailed builds. The tweezers are made from stainless steel and finished with a black cationic coating. This combination gives the tool a clean, technical look while supporting long-term workshop use. Rounded edges are designed to prevent scratching, an important detail when working near painted surfaces, clear parts or freshly applied markings. The slim body suits delicate handling tasks such as lifting, turning and adjusting small components during assembly or finishing. On the bench, the tool fits naturally into decal application, part placement and other fine correction work that calls for a steady grip and a narrow contact point. It also works well as a dedicated craft tool kept alongside knives, files and cutters for repeated detail sessions on scale models. Warning! Not suitable for children under 14 years.
Model-making tools
Basic Drill Set, model tool, 1.0 to 3.0 mm
300074049€17.99
The Basic Drill Set brings 5 drill sizes into one compact model tool set, covering 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm for precise hole work across a wide range of hobby tasks. This spread gives a practical progression from fine starter holes to larger openings when parts need a broader pass. Each diameter serves a distinct role during model preparation and finishing. Smaller bits can be used where narrow openings or careful pilot points are needed, while the larger sizes support follow-up drilling when fittings, posts or mounting points call for more space. Keeping these 5 sizes together makes it easier to select the required diameter for the next step instead of working around a single fixed size. The set format also keeps the focus on measured, deliberate drilling rather than improvised tool choices. On the bench, the range suits routine workshop jobs such as preparing parts, adjusting openings and refining fit before final joining. It also works well for hobby sessions that move between delicate detail work and broader drilling tasks, with each bit size ready for the specific opening required.
Model-making tools
Basic File Set (3), modeling tool set, 16 cm
300074046€10.79
The Basic File Set (3) brings 3 distinct file shapes into one compact modeling tool set for controlled shaping, smoothing and edge work. Flat, round and half-round profiles make it easier to match the filing surface to the part being worked, whether the task involves straight edges, drilled openings or curved contours. Each file measures about 16 cm in length, giving a hand-friendly format for bench work where smaller parts and tighter areas need steady control. The set is specially developed for modeling use, with double-cut surfaces that support material removal on plastic and soft metals. That combination suits cleanup after cutting, refining contact points, easing tight fits and smoothing visible areas before the next build step. On a workbench, the flat file can true edges and level small surfaces, while the round file reaches into holes and narrow recesses. The half-round profile helps follow curved sections where a flat face alone cannot sit cleanly. Black handles support a firm grip through repeated strokes, keeping the focus on accurate hand finishing across hobby, craft and model-building tasks. Warning! Not suitable for children under 14 years.
Model-making tools
Bending Plier for Photo Etched Craft Tool
300074067€34.49
The Bending Plier for Photo Etched is made for the precise shaping work that gives scale builds a cleaner, more refined finish. Its long, narrow metal jaws reach small tabs and edges on photo-etched parts, making controlled bends easier when working with thin stainless metal components that demand a steadier touch than standard molded parts. A spring loop between the handles keeps the jaws open after each movement, so the plier is ready for the next adjustment without constant resetting. This helps when a part needs to be held, aligned and bent in short, careful steps. The curved black handles support a stable grip during close bench work, especially when handling tiny detail pieces where finger placement and pressure matter. In a photo-etched workflow, the plier covers the shaping stage after parts have been cut free and cleaned, giving fine metal additions their intended form before placement on the model. On the workbench, it suits tasks such as folding tabs, refining edges and positioning narrow stainless metal details before attachment. The compact, precision-led format also fits careful touch-up work on hard-to-reach areas where broader tools can get in the way. Warning! Not suitable for children under 14 years.
Model-making tools
Conical File 1.5-8 mm, hobby tool, #200 finish
300074164€24.49
This conical file is built for precise modification work on molded parts with holes, using a tapered filing surface to reach areas that flat tools cannot address cleanly. With an overall length of 150 mm, a 55 mm file section and a working diameter range from 1.5 mm to 8 mm, it supports controlled shaping of narrow openings, rounded cutouts and gradually widening holes on model parts. The #200 grade finish is tuned for fine adjustments rather than aggressive removal, making it useful when a part needs a cleaner edge, a more accurate opening or a smoother transition inside a curved recess. The conical form allows contact at different points along the taper, so the same tool can work near the tip for smaller openings or farther down the file for broader shaping. An embossed grip supports a secure hold while changing the filing angle across detailed surfaces. A transparent cover protects the filing section when the tool is stored in a drawer, toolbox or hobby case. On the workbench, this file suits careful fitting and cleanup on molded components that need subtle correction before final assembly or finishing. It is especially useful during test fitting, edge refinement and detail preparation where a gradual taper gives more control than a straight file.
Model-making tools
Craft Knife II hobby cutter with auto-lock blade
300074153€6.39
Craft Knife II combines a slim retractable format with an ergonomic black handle and a stainless steel segmented blade for precise hobby cutting. The auto-lock slider fixes the blade at the selected extension, helping maintain a steady feel when trimming masking film, scoring sheet material or cutting clean lines through paper and card at the workbench. The blade is made from high-carbon stainless steel with a thickness of 0.38 mm, a detail that supports a fine cutting edge while adding resistance to rust. When the cutting edge dulls, the rear clip detaches by squeezing the tabs on both sides and serves as a blade snapper for removing worn sections. The blade can also be removed, reversed and reinstalled for left-handed use, so the same knife adapts to different hand positions without changing the handle layout. Commercially available small cutter knife replacement blades are compatible. On a model bench, in a craft corner or beside a cutting mat for decal and masking work, the compact body keeps the tool easy to place, pick up and reset between cuts. The retractable blade format also suits short, repeated trimming passes where controlled extension matters as much as edge sharpness. Warning! Not suitable for children under 14 years.
Model-making tools
Craft Saw Blade, replacement hobby saw blade
312997001€6.99
This craft saw blade brings fine-toothed cutting control to detailed hobby and model work. The slim metal form, long rectangular profile and narrow toothed edge suit careful trimming, separating and shaping where a broader workshop saw would feel too coarse. A rounded front tip helps the blade move into tighter working areas while keeping the cutting edge clearly visible during each pass. The blade is shown as a standalone replacement part with a circular mounting hole for fitting to a compatible handle. Its dark metal surface and brushed finish keep the form easy to read on the bench, especially when following marked lines or working close to small components. The continuous row of fine teeth along one side is geared toward measured hand movement rather than fast rough cutting, which makes it useful for controlled material removal in model building, craft assembly and detail work. On the workbench, this blade suits jobs such as trimming sheet material, refining openings and separating delicate sections before sanding or final fitting. It also works well as a spare blade kept alongside other hobby tools, ready for precise hand cutting when a knife or larger saw is not the right match.
Model-making tools
Craft Tools Bending Tweezers for PE Parts
300074117€23.99
Craft Tools Bending Tweezers for PE Parts are made for the precise handling and shaping that photo-etched details demand. The stainless steel tool is designed for brass and nickel silver parts, with a slim 100 mm format that sits neatly in the hand while working over small model assemblies and etched fittings. Unlike general-purpose tweezers, this tool is built around the bending task itself. The tips are made as thin as possible so they can be positioned directly along a fold line before the metal is bent by hand. That close contact helps keep narrow tabs and fine edges aligned while forming crisp angles on delicate components. The tweezers can be used on fold lines up to 10 mm in length, which suits many of the small brackets, panels and detail sections found in photo-etched parts sets. For model builders working with finer metal additions, that focused geometry gives more control than a standard pickup tool. On the bench, the compact length supports careful work in tight spaces around unfinished assemblies, detail sprues and small subassemblies. The stainless steel construction also suits repeated use as part of a regular modelling tool set, whether shaping a single etched flap or preparing several metal details for a larger build. Warning! Not suitable for children under 14 years.
Model-making tools
Curved Scissors for Polycarbonate Hobby Trimming
300074005€19.49
These curved scissors are made for the precise trimming work that polycarbonate R/C car bodies demand. The stainless steel blades combine a slim profile with a curved cutting edge, giving clear access to shaped sections where flat tools can be awkward to position. Around wheel openings, roof edges and molded corners, the blade shape helps follow the line of the body with a steadier cutting path. The compact format suits close hand work on hobby benches, where small adjustments often matter as much as the main cut. The curved blade tip reaches into formed contours with less repositioning, which helps when refining openings after the main body shape is removed. Stainless steel construction gives the cutting edges a solid, workshop-ready feel for repeated use on polycarbonate shells and other detailed trimming tasks linked to model body preparation. Used during body finishing, these scissors support careful shaping before painting, mounting and final assembly. They fit naturally into R/C car build sessions where clean edges and controlled cuts help the bodyshell sit neatly and keep the finished outline crisp. Warning! Not suitable for children under 14 years.
Model-making tools
Curved Scissors, PC Body Tool, 12 mm Blade
300074151€31.49
These curved scissors are made for detailed trimming work on polycarbonate model bodies, where a clean line matters as much as the paint and decals that follow. The 12 mm blade size keeps the cutting area compact, making it easier to guide the edge through tight curves, narrow openings and shaped sections that appear around wheel arches, windows and cockpit cutouts. The curved blade profile changes how the tool meets the material. Instead of forcing a straight path through rounded shell sections, the cutting edge follows the contour more naturally, which helps reduce awkward hand repositioning during fine trimming. On thin polycarbonate sheets, that added control is useful when separating molded sections, refining body edges or cleaning up small areas after the first rough cut. The format suits bench work where precision matters more than reach. In a model building setup, these scissors slot in alongside knives, reamers and sanding tools as a dedicated option for curved cuts. They are especially useful during body preparation, when shell openings and perimeter lines need steady, repeatable shaping before mounting and finishing continue. Their focused 12 mm blade size keeps the tool aimed at detail work rather than broad sheet cutting.
Model-making tools
Cutting Mat α A4, hobby mat, 300 x 220 mm
300074149€15.99
The Cutting Mat α A4 brings a compact 300 x 220 mm work area to model benches where clean cuts, measured layouts and repeatable alignment matter. Its 2 mm thickness and translucent blue finish create a clear visual base for trimming sheet material, marking lines and setting small parts in place during close-up hobby work. The surface is printed with more than a standard grid. In addition to straight measurement guides, it carries R curves and dedicated lines for cutting masking tape, which helps when preparing paint masks or repeating narrow tape widths. The mat is made from low-odor olefin resin, a practical choice for indoor bench use where tools, parts and markings stay close at hand. A 3-layer structure places a hard inner core between softer outer layers, guiding the knife edge through repeated passes while helping reduce wear on blades. The printed markings serve as layout guides for cutting and positioning tasks across model and craft work. On a worktable beside a ruler, knife and small components, the A4 format fits neatly into limited space while still leaving room for measured cuts and angle checks. It suits routine bench tasks such as trimming masking material, sizing styrene pieces, marking curves and keeping small-scale hobby work organized in one defined area.
Model-making tools
Cutting Mat α A5, hobby cutting mat, blue
300074142€10.29
The Cutting Mat α A5 brings a compact 220 x 150 x 2 mm work surface to model making, craft cutting and bench preparation, with a translucent blue finish that stays easy to read under strong task lighting. Its A5 footprint suits smaller desks, side tables and portable tool setups where clean measuring and controlled knife work need to happen in a limited space. Across the printed face, the mat combines edge rulers with millimeter markings, a measurement grid, angle guides, circular references and a large protractor-style semicircle. Radius curves marked from R100 to R500 add a practical reference when shaping or checking rounded sections. The reverse side is plain, giving a second working face when a clear surface is preferred for layout tasks. The olefin resin material is described as low odor, which helps during longer indoor sessions focused on trimming parts, preparing paint masks or sizing sheet stock. On the bench, the printed tape-cutting lines support repeatable masking strips when a ruler and hobby knife are used together. The mat suits detail tasks such as measuring small components, setting cut angles and preparing curved templates before assembly or finishing work begins.
Model-making tools
Decal Scissors, model tool for precise trimming
300074031€24.49
These Decal Scissors bring fine control to 2 common model workshop jobs: trimming paper decals and cutting soft R/C racing rubber tires. The carbon steel construction and pointed blade shape support close, accurate cuts where larger scissors can feel clumsy, whether working around small printed markings or removing thin flash from molded tire edges. For decal work, the narrow tip helps separate intricate shapes from the sheet with less excess paper left around the design. For tire prep, the blades can trim molding flash from soft racing rubber and also support precise modifications when a track setup calls for a specific cut pattern. The compact format suits bench work where small movements matter, and the sharp cutting edge is intended for detail-focused handling rather than broad general-purpose cutting. To preserve the cutting edge, the scissors are intended for paper decals and should not be used on vinyl stickers. On a model bench, they fit naturally beside paint, tweezers and sanding tools during the finishing stage. At the track, they help clean tire edges or prepare a fresh set of rubber before setup changes, giving builders and racers a focused tool for neat, exact trimming work. Warning! Not suitable for children under 14 years.
Model-making tools
Decal Tweezers, hobby tool with angled tips
300074052€22.49
These decal tweezers are shaped for careful handling of both small and larger transfers, giving model work a more controlled touch where printed markings need exact placement. The angled tip makes it easier to approach surfaces at a clear working angle, whether positioning a narrow stripe along an edge or settling a larger graphic onto a curved section. The stainless steel body brings a slim, precise format suited to close bench work, while the tip geometry divides the task by size. Smaller decals can be picked up delicately at the pointed ends, where fine contact helps with detailed alignment on compact areas. Larger decals are supported lower down the tip, allowing a broader hold that helps keep the transfer flat while it is moved into place. This split handling approach is the key mechanism of the tool: the same tweezers use the point for fine markings and the lower tip area for wider pieces. On a model-building bench, that means one tool can move from tiny insignia to broader printed graphics without changing grip or reaching for a second pair. Used alongside water-slide markings during finishing work, the angled form helps maintain a clear view of the placement area while guiding the decal onto the target surface. Warning! Not suitable for children under 14 years.
Model-making tools
Design Knife Blade (30), replacement blades
300074074€5.69
Design Knife Blade (30) supplies a fresh cutting edge for detailed hobby work, with 30 replacement blades stored together in a plastic container for orderly handling between sessions. The blade shape suits fine trimming, scoring and close detail work where controlled cuts matter on small parts and precise outlines. As a replacement accessory for the Design Knife, this set focuses on keeping cutting performance consistent as edges wear through regular use. Swapping a worn blade promptly helps maintain a cleaner cut and steadier handling during modelmaking, craft preparation and careful finishing work. The compact storage case keeps the blades contained in one place on the bench and helps separate unused blades from loose tools and materials. On a build table, the set supports repeated detail tasks such as trimming film, refining edges or cutting small shapes with a sharper working edge available when needed. It also fits neatly into a regular hobby supply setup, where spare blades are kept ready for ongoing assembly, finishing and workshop use.
Model-making tools
Design Knife, hobby craft knife with 30 blades
300074020€12.99
The Design Knife brings fine control to trimming, scoring and detail cutting, with a sharp triangular blade mounted in a metal chuck and a black and gold handle shaped for steady hand work. Ridged and knurled grip areas support careful guidance when working along narrow edges, small openings or precise cut lines on model-making materials. The blade format suits close, deliberate cuts where a larger craft knife would feel less exact, and the metal chuck keeps the mounted blade aligned during detailed work. A set of 30 replacement blades extends the knife's working life across repeated bench sessions and keeps fresh cutting edges close at hand. Protective cap parts are also included for covered storage between uses. The visible Made in JAPAN marking identifies the origin stated on the tool itself. On a model bench, the knife supports clean trimming of parts, careful scoring before separation, and small corrective cuts during finishing work. It also fits general hobby and craft tasks that call for a narrow blade tip, controlled pressure and a compact handle that stays precise in the hand.
Model-making tools
Diamond File for Photo Etched, hobby file
300074066€11.29
The Diamond File for Photo Etched is a precision hobby tool made to refine thin metal details with more control than a standard file. Its diamond abrasive surface is suited to light carving on hard materials such as stainless metal, helping clean up edges on photo-etched parts while keeping the work focused and accurate. The slim profile and pointed working end also make the tool useful for narrow grooves, corners and other small sections that need careful finishing. A key advantage of this file is the way it moves across delicate etched metal. The surface files equally well in any direction, so shaping strokes can follow the angle of the part instead of forcing a single filing path. It is also designed not to snag on thin photo-etched sections, which matters when working with fine tabs, cut lines and small decorative details. The half-circle shape adds another practical benefit by reaching into curved or recessed areas that are awkward with flatter tools. On the bench, this file fits naturally into the finishing stage after parts are cut free and before bending or final placement. It helps remove flash, smooth contact points and tidy hard-to-reach areas on detailed model assemblies where a clean metal edge changes the final look. Warning! Not suitable for children under 14 years.
Model-making tools
E-Ring Tool 2 mm, model tool for tiny clips
300074032€11.29
The E-Ring Tool 2 mm is a dedicated hand tool for one of the fiddliest jobs in RC model building: fitting and removing tiny 2 mm E-rings. Its specially designed tip uses a unique shape to catch the clip securely, making small fastening work easier to control during construction and maintenance. Instead of relying on general-purpose pliers or improvised tools, this format focuses directly on the narrow opening and small contact area of 2 mm E-rings. The forked working end helps guide the clip onto its groove or lift it away again when a model needs servicing. That targeted shape is especially useful around compact assemblies where retaining clips sit close to moving parts and limited space makes precise handling more important. The slim tool body keeps the action close to the fingertips for careful placement. On the workbench, it suits repeated jobs such as drivetrain upkeep, suspension service or replacing worn parts that use small retaining clips. During a fresh build, it helps keep clip installation neat and controlled; during maintenance, it supports quicker removal when parts need to come apart for cleaning or replacement. Warning! Not suitable for children under 14 years.
Model-making tools
Engraving Blade Holder, craft tool, aluminum
300074139€18.99
The Engraving Blade Holder combines a slim pen-style form with a 126 mm length and 6 mm diameter, giving precise hand control for fine engraving, scribing and trimming work on model parts. Its lightweight aluminum body keeps handling nimble during careful passes along panel lines, edges and marked cutting paths. A knurled grip section supports steady finger placement, while the chuck in nickel-plated brass secures the blade in the holder. Blade insertion and removal follow a direct sequence: lightly pinch the chuck, rotate the handle to loosen it, place the blade, then tighten the handle again. This mechanism keeps blade changes straightforward when switching between different detailing tasks. The holder is compatible with Fine Engraving Blades 74135, 74136, 74137 and 74138, and also accepts the Design Knife Blade 74074. On the bench, the slim profile suits close, deliberate movements when refining grooves, extending panel lines or cutting precise shapes from sheet material. A protective cap is included to cover the tip in storage, and it can also be fitted to the end of the handle during use to help prevent the holder from rolling across the work surface. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Knife, hobby knife, stainless steel
300074053€13.49
The Fine Craft Knife brings slim stainless steel construction and a segmented precision blade to detailed hobby cutting. Its pen-like shape and stepped slider make it easy to set a short extension for close trimming or a longer reach for straight cuts on paper, masking film and similar light materials at the workbench. The black sliding lock section secures the blade position once set, which helps keep handling consistent during careful edge work. Snap-off blade segments provide a practical way to renew the cutting edge when one section becomes worn, so fine lines and clean corners stay easier to manage over repeated sessions. The narrow metal body keeps the tool compact in storage and easy to place alongside rulers, cutting mats and other bench essentials. Visible blade markings indicate stainless steel construction, and the overall format is suited to model finishing, decal preparation and small craft adjustments where accuracy matters more than force. On a model bench, the knife supports tasks such as trimming masking shapes, cleaning excess material from edges and scoring thin sheet stock before separation. It also fits general craft use for neat, controlled cuts in projects that call for a light touch and a clearly guided blade path. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Saw blade III, hobby saw set, 0.15 mm
300074105€11.29
Fine Craft Saw blade III is a hobby saw set for narrow, controlled cuts where a normal modeling saw would remove too much material. The etched metal blades are just 0.15 mm thick, so the cut stays fine and helps avoid unwanted changes to the length of small parts during model work. The sheet provides 4 blade formats for different cutting situations, with each profile shaped to suit a particular kind of access or cutting line. Fold-over grips let the blades mount onto a Modeler's Knife Item 74040 for a pen-like hold and close control during careful trimming. The metal sheet marking shows the blade variants as III-A, III-B, III-C and III-D, which helps keep the different shapes clearly organised before use. The visible SUS304 marking identifies the stainless steel material used for the etched blade sheet. This tool set suits detailed bench work such as adjusting fitted parts, opening narrow cuts, or separating small sections where accuracy matters more than cutting speed. In model building sessions with tight tolerances and delicate components, the slim blade profile supports cleaner planning before sanding, fitting, or final assembly.
Model-making tools
Fine Craft Saw Blades, scribing tool set 0.1 mm
300074097€11.79
This set of Fine Craft Saw blades is made for precise scribing and detail recovery in model work. The 0.1 mm stainless steel construction supports narrow cuts when seam cleanup has softened surrounding detail, and it also helps deepen existing panel lines with a controlled, fine kerf. On the etched sheet, 6 blades are arranged in 2 rows of 3, ready for careful removal and use at the bench. The blade selection combines straight profiles with rounded profiles, which gives more flexibility across flat sections, curved bodywork and tighter access points. Compared with Item 74094, these blades use smaller teeth and a finer pitch, which suits more delicate surface work where heavier cutting action would be too coarse. The material is stainless steel, and the thin profile keeps the cutting edge focused on light engraving and detail correction rather than broad removal. Fold the grips over and the saws can be used on their own for close hand control during panel restoration, trim work or fine surface adjustment. When a longer handle is preferred, the blades may also be fitted to Modeler's Knife Item 74040. At the workbench, that combination supports steady passes along engraved lines, corners and shaped sections on scale models.
Model-making tools
Fine Drill Bit 0.3 mm, model tool accessory
300074081€6.49
The Fine Drill Bit 0.3 mm brings exact sizing to delicate model-making tasks where a very small opening matters. With its 0.3 mm diameter, it supports careful drilling for fine detailing, subtle modifications and other close-control bench work on miniature parts. This single drill bit is suited to jobs that call for a narrower diameter than standard hobby bits can offer. It can be used to prepare tiny holes for detail placement, light pinning work or other precision steps during a build, while keeping material removal to a minimum. The compact accessory format makes it easy to keep alongside knives, files and other workshop essentials used in scale modelling. On the workbench, the 0.3 mm size is especially useful when a project needs measured, hand-led accuracy rather than a broader cut. It fits naturally into careful model assembly, detailing and finishing routines, whether the task involves refining a small component or preparing a precise point for the next build step. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Drill Set, hobby drill bit set, 0.3-0.8 mm
300074044€18.49
This Fine Drill Set brings 5 micro sizes together in one compact format, giving model and hobby work a precise way to open small holes from 0.3 mm up to 0.8 mm. The range covers 0.3, 0.4, 0.5, 0.6 and 0.8 mm, which helps when a build calls for closely stepped diameters rather than one broad jump between sizes. The slim metal bits are suited to detail-focused tasks where larger workshop drills would be too coarse. Small diameter changes matter when preparing openings for pins, wire, rods or other fine components, and this set keeps those increments close at hand. The spiral cutting sections are made for careful drilling on miniature parts, while the fold-open case stores each bit in its own place instead of letting the sizes mix loose on the bench. That layout also makes it easier to return each bit after use and pick the next diameter quickly. On a modelling desk, the set fits naturally beside cutters, files and sanding tools for bodywork, cockpit details, scratchbuilding or electronics-related hobby tasks. The compact case travels neatly to club meets or workshop sessions, and the grouped size selection supports steady, methodical progress when a project needs more than one hole diameter. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.15mm, modeling tool
300074145€33.49
The Fine Engraving Blade 0.15mm is a precision modeling tool for adding or sharpening engraved detail on plastic parts. Its tungsten carbide construction is designed for smooth, consistent scoring, making fine panel lines and custom surface work easier to control during advanced finishing tasks. The 0.15 mm blade thickness suits narrow engraved lines, while the 25 mm total length and 2 mm shank match dedicated tool setups for stable handling. Recommended compatibility includes the Engraving Blade Holder 74139, plus Fine Pin Vise D 74050 and D-R 74112. The working method is straightforward: hold the blade at a 45° to 60° angle, then pull lightly across the plastic surface and repeat as needed to deepen the line with a clearly defined result. A color mark on the shank helps identify the thickness quickly when several blade sizes are kept together. For bench work focused on panel lines, hatches, access covers or custom scribed detail, this blade supports careful, repeatable passes instead of heavy pressure. The included storage case holds up to 10 blades, keeping matching sizes close at hand during longer modeling sessions. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.1mm, hobby tool blade
300074135€33.99
The Fine Engraving Blade 0.1mm is a precision hobby tool blade for adding sharply defined surface detail to plastic models. Made from tungsten carbide, it is designed for advanced engraving work such as refining panel lines or cutting new fine grooves, with a slim 0.1 mm profile that supports exact, narrow scoring. The blade measures 25 mm in total length and uses a 2 mm shank diameter for use with dedicated holders and compatible pin vises. For operation, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface, then passed again as needed to deepen the line gradually. This pull action helps create a cleaner result than forcing a deep cut in one pass. A color-coded marking on the shank identifies the blade thickness quickly when several sizes are kept on the bench. Each blade comes in a storage case that holds up to 10 blades, keeping replacements together between sessions. It suits careful detailing on body panels, access hatches and other recessed lines where a narrow, controlled cut gives the surface a more defined scale look. Recommended holders are available separately. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.25mm, hobby tool blade
300074162€32.99
The Fine Engraving Blade 0.25mm is a precision hobby tool blade for scoring narrow lines and sharply defined surface detail on model parts. Held at a 45 to 60 degree angle and pulled lightly across the surface, it cuts a controlled scribed line that can be deepened gradually with repeated passes. Its 25 mm total length and 2 mm shank diameter suit compact hand-tool setups where close control matters. A color-coded marking on the shank identifies the blade thickness quickly, which helps when several engraving sizes are kept on the bench for different line widths. The blade is recommended for use with the dedicated Engraving Blade Holder and is also compatible with Fine Pin Vise D and Fine Pin Vise D-R. One blade is supplied. The included case stores up to 10 blades, making it easier to keep replacements together and ready for the next detailing session. On aircraft, cars, armor or sci-fi subjects, the narrow 0.25 mm profile supports clean recessed lines, refined hatch outlines and sharper separation between adjacent surface sections.
Model-making tools
Fine Engraving Blade 0.2mm, craft tool blade
300074136€32.99
The Fine Engraving Blade 0.2mm is a precision craft tool blade for adding narrow engraved lines to plastic model surfaces. Made from tungsten carbide, it combines a very fine 0.2 mm blade thickness with a 25 mm overall length and a 2 mm shank, creating a compact format suited to controlled hand work on small details. This blade is used by inserting it into a compatible engraving blade holder or pin vise, then drawing it lightly across the surface in several passes to cut a clean groove. The documented use method focuses on a pull stroke rather than pushing down with force, which helps avoid raised edges, distortion, or blade bite in the material. A colour mark on the shank identifies the thickness, so this 0.2 mm version can be separated quickly from 0.1 mm, 0.3 mm, and 0.5 mm blades in the same range. An engraving blade holder is sold separately. On model parts, templates, and panel line work, the narrow profile supports crisp scribing where broader blades would remove too much material. The included case stores up to 10 blades, keeping spare and in-use blades together between work sessions. Protective goggles are recommended during use, as plastic shavings can form while engraving. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.3mm, hobby tool blade
300074137€32.99
The Fine Engraving Blade 0.3mm is a precision hobby tool blade for adding sharper panel lines and custom surface detail to scale models. Made from tungsten carbide, it is designed for smooth, consistent scoring when held at a 45 to 60 degree angle and drawn lightly across the surface in repeated passes. Its 25 mm total length and 2 mm shank diameter suit the dedicated Engraving Blade Holder and also fit Fine Pin Vise D and Fine Pin Vise D-R. The 0.3 mm thickness gives a defined line width for visible detail work without moving into broader cuts. A color-coded marking on the shank helps identify the blade thickness quickly when several sizes are kept together. Each blade comes in a storage case that holds up to 10 blades, keeping replacements and used blades organized between sessions. This blade suits advanced model finishing tasks such as deepening panel lines before paint, refining molded detail, or adding new engraved features to body shells and other model surfaces. Light repeated pulls across the material allow gradual control over depth and line definition, which is especially useful when working on visible exterior sections where clean edges matter. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.4mm, hobby tool
300074147€32.49
The Fine Engraving Blade 0.4mm is a precision hobby tool for adding sharper surface detail to plastic models. Its tungsten carbide construction is designed for engraving panel lines and custom scribed features with a smooth, consistent finish, giving shells, fuselages and body panels cleaner definition under paint and weathering. This blade measures 25 mm in total length and uses a 2 mm shank, a format intended for controlled detail work with compatible holders. Recommended use is with the dedicated Engraving Blade Holder 74139, and it is also compatible with Fine Pin Vise D 74050 and D-R 74112. For use, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface to score it, with repeated light passes used to build a clearly defined line. A color-coded marking on the shank identifies the blade thickness quickly when several sizes are kept on the bench. The supplied case stores up to 10 blades, which helps keep matching sizes together between projects and supports a tidier setup for ongoing model detailing. This 0.4 mm version suits builders who want to emphasize existing lines or cut new recessed detail with a clearly controlled width. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.5mm, hobby tool blade
300074138€33.49
The Fine Engraving Blade 0.5mm is a precision hobby tool blade for adding sharper definition to model surfaces. Made from tungsten carbide, it is designed for engraving panel lines and cutting custom detail with a smooth, consistent finish that suits advanced model work. The 0.5 mm blade thickness gives a broader engraved line than finer variants in the same range, while the 25 mm total length and 2 mm shank diameter keep the format compact for controlled handling. It is recommended for use with the dedicated Engraving Blade Holder 74139 and is also compatible with Fine Pin Vise D 74050 and D-R 74112. The shank carries a color-coded marking so the thickness can be identified quickly when several blade sizes are kept together. Each blade comes in a storage case that can hold up to 10 blades. For use, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface to score it. Repeated light passes help build a clearly defined line on plastic model parts, whether refining existing panel detail or adding new engraved features to a custom build. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Needle 20°, modeling tool
300074148€23.49
The Fine Engraving Needle 20° is a precision modeling tool for clean, controlled scribing on curved and straight surface details. Its pointed needle tip differs from the hooked profile used on engraving blades, so it can trace arcs, corners and fine panel lines with a lighter, more exact feel on model parts. Crafted from cemented carbide and finished to a precise standard, the needle combines a 25 mm total length with a 2 mm shank for stable mounting in compatible holders. The working method is simple and exact: insert the needle carefully, hold it at the shown angle, then pull it lightly across the surface in repeated passes to score a clearly defined line. This approach helps avoid rough edges that can come from forcing a single deep cut. The needle is recommended for the Engraving Blade Holder 74139 and is also compatible with Fine Pin Vise D 74050 and D-R 74112. On the workbench, it suits tasks such as emphasizing existing panel lines, adding new engraved detail and refining curved shapes on plastic model surfaces. A protective case is included for storage and can hold up to 10 needles as well as separately sold engraving blades, keeping small precision tools together between detailing sessions. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise D, hand drill, 0.1-3.2 mm chuck
300074050€23.99
Fine Pin Vise D is a manual hand drill for model assembly tasks that call for clean, controlled holes in different diameters. Its chuck accepts drill bits from 0.1 mm to 3.2 mm, giving one compact tool the range to handle very small openings as well as larger pilot holes. The metal body, slim profile and precision tip suit close work on parts where powered drilling would be too aggressive. The long knurled handle gives the fingers a secure hold while the tool is turned by hand, and the hexagonal top cap provides a steady contact point for guided rotation. That layout helps when starting a hole exactly on a marked spot, opening mounting points, or adjusting fit on detailed assemblies. Because the drilling action is manual, the bit can be advanced gradually with close control over pressure and direction. This makes the tool useful for careful work on model parts, conversion tasks and other fine hobby jobs that depend on accuracy rather than speed. On the workbench, Fine Pin Vise D fits naturally alongside drill bits used for plastic kits, scratch-building and detail modification. It supports measured, step-by-step drilling where neat edges and exact placement matter most. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise D-R, hobby drill, 0.1-3.2 mm
300074112€24.49
The Fine Pin Vise D-R is a hand-held hobby drill made for precision hole work in scale model projects. Its 0.1 mm to 3.2 mm bit capacity covers delicate openings for fine detailing as well as broader drilling tasks used during model modification, giving steady manual control where small parts call for a lighter touch. The body is made from nickel-plated brass, combining a clean metallic finish with the weight and feel needed for accurate handling. An elastomer grip sits at the center to support a secure hold during slow, careful turns. At the rear, the rotating grip end uses built-in ball bearings, so the cap moves smoothly against the hand while the tool turns. This mechanism helps keep pressure consistent and the drilling motion controlled when working on narrow contact points or marked pilot positions. On the bench, the Fine Pin Vise D-R suits jobs such as opening mounting points, refining detail areas, or preparing parts for custom changes on scale models. The metallic sticker marked PIN VISE and the engraved rubber grip add clear workshop identity while the compact manual format stays focused on close, accurate work. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise, hand drill for 0.1-1.0 mm bits
300074051€14.79
The Fine Pin Vise brings measured hand control to drilling jobs that appear throughout model assembly, especially when small parts need a clean opening without the force of a powered tool. Its 0.1 mm to 1.0 mm bit range suits very fine work, from starting pilot holes to opening marked points in miniature components. The tool uses a compact metal construction with a black body, a textured center section and a silver front chuck. The knurled grip improves purchase during slow rotation by hand, while the chuck is shaped to hold micro drill bits used in detailed hobby tasks. A hexagonal swivel cap at the rear provides a firm resting point, allowing steady forward pressure while the fingers turn the body. This layout supports careful alignment when working on narrow surfaces, small panels or parts that need exact placement. On the bench, the Fine Pin Vise fits the rhythm of precise build work such as preparing openings before fitting detail parts or refining holes after test placement. It also suits craft and miniature projects where a hand-driven tool gives closer feedback than a motorized drill. Batteries are not required.
Model-making tools
Fine Pivot Bit 0.2mm, drill bit, 1mm shank
300074113€7.99
The Fine Pivot Bit 0.2mm Shank 1mm is built for precise hole drilling in small-scale model work, where a very fine cutting diameter and steady handling are essential. Its 0.2 mm bit size targets delicate drilling tasks, while the 1 mm shank gives the tool a secure fit in compatible hand vises. The pivot drill bit design uses a bit section that is thinner than the shank. This construction helps reduce deviation at the drilling point and supports more accurate placement when working on fine parts. The material is described as shatter-resistant, giving the bit added resilience during careful manual drilling. A high-quality bit finish further supports clean results, especially when accuracy matters more than speed. This bit suits detailed workshop tasks such as opening tiny guide holes, refining model components or preparing parts that need exact alignment. It is compatible with the 74050 Pin Vise D, 74051 Pin Vise S and 74112 Pin Vise D-R, fitting neatly into established hand-tool setups for controlled hobby work.
Model-making tools
Fine Pivot Bit 0.6mm Shank 1mm, drill bit
300074127€5.59
The Fine Pivot Bit 0.6mm Shank 1mm is made for detailed modeling work where hole placement and clean results matter. Its 0.6 mm bit is thinner than the 1 mm shank, a pivot-drill layout that helps reduce deviation during drilling while giving the bit greater resistance against shattering. That combination suits small, exact openings in parts that need a controlled start and a neat finish. The high-quality bit finish supports excellent hole quality, which is especially useful when refining components for scale builds or adding precise openings to scratch-built sections. The bit can be used on plastic, metal, brass and wood, making it a practical choice for mixed-material bench work instead of a single-surface specialist. A plastic storage case is included to keep the bit protected between sessions and easier to sort with other workshop tools. Compatibility with Pin Vise D 74050 and Pin Vise D-R 74112 gives this bit a clear place in a hand-tool setup for careful drilling tasks. On a workbench, it suits measured marking, slow hand rotation and close control when a standard bit would be too thick for the job. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.7mm Shank 1mm, drill bit
300074128€5.59
The Fine Pivot Bit 0.7mm Shank 1mm is built for detailed drilling work where a clean, controlled opening matters. Its pivot construction uses a 0.7 mm bit with a thicker 1 mm shank, a layout that supports precise hole placement while helping reduce deviation during delicate modelling tasks. The thinner cutting section handles fine openings, while the stronger shank adds resistance against shattering under careful hand or tool use. A high-quality bit finish supports clean hole quality, which is especially useful when preparing parts for added detail or refining small openings in model components. The bit can be used on plastic, metal, brass and wood, making it a practical choice for different stages of bench work across mixed-material projects. A plastic storage case is included to keep the bit protected between sessions and easier to sort with other workshop tools. On the workbench, it suits jobs such as opening pilot holes, refining marked drill points and handling small-scale detailing where a 0.7 mm diameter is required. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.8mm, drill bit, 1.5mm shank
300074132€5.59
This Fine Pivot Bit combines a 0.8 mm drilling tip with a 1.5 mm shank to support precise hole work on small model components. The pivot format uses a bit section that is thinner than the shank, which helps keep the drill running with less deviation while adding resistance against shattering during careful hand drilling. The 6.0 mm flute length gives space for controlled cutting, and the recommended hole depth of 5.5 mm helps match the bit to fine-detail tasks where depth matters as much as diameter. The finished surface of the bit is designed for excellent hole quality, which is useful when parts need a clean opening for pins, wire routes or detail additions. Use extends across plastic, metal, brass and wood, making this a practical choice for mixed-material bench work. A plastic storage case is included for keeping the bit protected between sessions. Compatibility with Pin Vise D 74050 and Pin Vise D-R 74112 makes the bit easy to place into established hand-tool setups. On the workbench, it suits measured drilling in compact spaces, whether opening starter holes in styrene, refining brass details or adding neat openings to wooden parts. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.9mm, drill bit, 1.5mm shank
300074133€5.59
This Fine Pivot Bit combines a 0.9 mm bit with a 1.5 mm shank to support precise hole drilling in detailed model work. The pivot design uses a bit section that is thinner than the shank, which increases resistance against shattering and helps reduce deviation while drilling by hand. A 6.0 mm flute length gives the cutting section a compact working area for controlled entry, and the recommended hole depth of 5.5 mm helps match the bit to small, exact tasks. The high-quality finish supports clean hole quality, which matters when opening mounting points, preparing detail holes or refining parts that need accurate alignment. The bit can be used on plastic, metal, brass and wood, making it useful across different stages of model building and workshop preparation. Each size comes with a storage case for keeping the bit protected between sessions. Compatibility with Pin Vise D and Pin Vise D-R makes it easy to pair with established hand-drilling setups for bench work, part modification and careful finishing on scale projects. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 1.1mm, drill bit for precise holes
300074140€5.59
The Fine Pivot Bit 1.1 mm with a 1.5 mm shank is made for controlled, accurate drilling in detailed hobby and model work. Its pivot design uses a bit section that is thinner than the shank, a construction that increases resistance against shattering and helps keep the drill path from wandering as the hole starts. This bit extends the Fine Pivot range beyond the existing 0.2 to 1.0 mm sizes, adding a larger option for jobs that still call for a slim, precise cutting point. The bit size is marked directly on the tool for quick recognition during bench work, which helps when several diameters are kept close at hand. A high-quality finish supports clean hole quality, especially where neat openings matter for pins, rods or added detailing. The bit can be used on plastic, metal, brass and wood, giving one tool a place across several stages of a build. Each size comes with a storage case for keeping the bit protected between sessions. Compatibility with Pin Vise D and Pin Vise D-R makes it easy to add this 1.1 mm size to an existing hand-drilling setup for careful workshop tasks and fine adjustment work. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 1.2mm, drill bit for pin vise
300074141€5.59
The Fine Pivot Bit 1.2mm Shank1.5mm is made for precise drilling work where clean placement matters. Its 1.2 mm bit is thinner than the 1.5 mm shank, a pivot design that gives the working tip added support and helps keep the drill line steady during careful hand use. This geometry is intended to reduce shattering and decrease deviation, which is especially useful when opening exact holes in model parts and detail components. The bit is marked with its size for quick recognition on the bench, so it can be picked out easily when several diameters are in use. A high-quality finish supports neat hole edges across different tasks. The bit can be used on plastic, metal, brass and wood, covering common materials found in scale modelling, scratch-building and modification work. Each size comes with a plastic storage case for straightforward organisation between sessions. The bit also complements existing Fine Pivot Bit sizes from 0.2 mm to 1.0 mm, making it a practical addition when a 1.2 mm diameter is needed for larger openings or specific fitting points. Compatible with Pin Vise D and Pin Vise D-R. Warning! Not suitable for children under 14 years.
Model-making tools
Handy Craft Saw II, craft saw, 2 carbon steel blades
300074111€12.49
Handy Craft Saw II brings fine-toothed cutting control to model modification, Mini 4WD work and woodcraft, with 2 carbon steel blades that cover both detailed trimming and broader cuts. The slightly thicker .35 mm blade format helps the saw stay truer in use, while the smooth finish supports cleaner edges on shaped parts and craft sections. The set contains 1 wide blade and 1 slim blade, each designed for a different cutting task rather than repeating the same profile. The wide blade measures 46 mm and gives more reach for straight trimming passes, while the slim 43 mm blade suits tighter areas where a narrower cutting line is useful. Both blades fit into the included grip, creating a compact hand tool that can be adapted to the material and the cut path. Carbon steel construction gives the blades the crisp tooth definition needed for careful hobby and craft work. On the bench, the saw suits jobs such as separating parts, opening slots, refining body sections or adjusting wood pieces with a hand-guided cut. In model and craft sessions where a powered tool would be too aggressive, the fine teeth and narrow blade profiles support slower, more deliberate shaping with clear visual control. Warning! Not suitable for children under 14 years.
Model-making tools
HC File PRO/Half-Rd 5mm, hobby file, half-round
300074126€34.99
The HC File PRO/Half-Rd 5mm is a precision hand tool for shaping and refining model materials with a slim 160 mm format and a half-round working profile. One side presents a flat filing surface while the opposite side follows a curved form, making it easier to work along straight edges, inside curves and narrow recesses with the same tool. Its double-cut pattern gives the teeth a clear, even bite, which helps remove material in a controlled way during adjustment and finishing work. The file is intended for hard materials such as metal, carbon fiber and FRP, and it also handles standard model parts where a finer fit or cleaner contour is needed. A chrome coating on the teeth helps prevent shavings from packing into the cut, so the working surface stays clearer through repeated passes. The black PVC grip has a non-slip finish, plus the twin star logo and white printed wording. At the workbench, this format suits trimming a tight corner, refining a curved opening or smoothing a shaped edge before the next build step. A plastic case is included for storage between sessions and helps keep the filing surface protected when the tool is not in use. Warning! Not suitable for children under 14 years.
Model-making tools
HG Angled Tweezers, model tool, stainless steel
300074047€18.99
HG Angled Tweezers bring precise control to model work where small plastic parts and narrow spaces demand a more exact grip. The stainless steel construction and angled tip shape support clean pickup, steady positioning and careful release, especially when fingers or broader tools block the view of the work area. This model tool is made for handling delicate components during assembly rather than for general household use. The angled profile approaches parts from the side, which helps when placing pieces near raised details, inside tighter sections or along edges that are awkward to reach with a straight tool. Precision-made tips transmit small hand movements directly into controlled placement, which matters when aligning lightweight parts before fixing them in place. The stainless steel build also suits repeated bench use around cutting mats, sprues and subassemblies. On the workbench, the tweezers fit naturally into tasks such as lifting trimmed parts from the mat, holding a component steady during test fitting or guiding a small piece into its final position on a scale model. For detailed assembly sessions, this focused shape keeps handling accurate and the contact point easy to judge. Warning! Not suitable for children under 14 years.
Model-making tools
HG RevAction Angled Tweezers, hobby tool
300074102€22.49
HG RevAction Angled Tweezers combine a reversed operating mechanism with an angled tip to give fine-detail work a more controlled feel at the bench. Squeezing the handle opens the tips and releasing closes them, so the tool can keep hold of a small part while the hand focuses on guiding it into place in tight, crowded areas. The angled profile helps the tips approach recessed spots and narrow gaps from a clearer working angle. Stainless steel construction gives the tweezers a precise, tool-focused build, while vulcanized fiber grips add a distinct contact surface on the handle. This combination suits tasks that call for repeated pick-up, placement and adjustment of small components, especially where steady pressure matters more than constant pinching. On a model building table, the tweezers can assist with aligning tiny fittings, shifting delicate pieces into position or handling small detail parts during careful assembly. They also suit electronics and other precision hobby work where access is limited and controlled grip matters across longer sessions. Warning! Not suitable for children under 14 years.
Model-making tools
HG RevAction straight Tweezers, craft tweezers
300074103€22.49
The HG RevAction straight Tweezers use a reversed operating mechanism that changes how small parts are held during detailed hobby work. Squeezing the handle opens the tips, and releasing it closes them, so the tweezers keep hold of a component while the hand can stay more relaxed. This setup is especially useful when a part needs to be held in place for longer moments during model assembly or fine positioning. The straight tip keeps operation simple and direct, with a clear line of sight to the contact point when placing or adjusting small pieces. Stainless steel construction gives the tool a precise, clean-working structure for repeated detail tasks, while vulcanized fiber grips add a distinct handle surface where control matters most. The narrow form also helps when working around compact assemblies, where larger tools can block access or obscure the view of the part being handled. On a workbench, the tweezers suit tasks such as holding tiny components steady, positioning delicate detail parts, or keeping a piece aligned while another step is completed. In model building sessions that involve repeated pick-up and placement, the RevAction layout supports consistent handling with less interruption between movements. Warning! Not suitable for children under 14 years.
Model-making tools
HG Straight Tweezers, craft tool, round tip
300074109€18.49
The HG Straight Tweezers are a steel craft tool made for precise handling in model building and other detailed hobby work. Their straight form and rounded tip support careful pickup, placement and adjustment of small parts, especially where fingertips would cover the work area or make alignment harder. The slim tip profile helps reach confined spots between assembled sections, while the longer body keeps the hand slightly back from the working area for a clearer view. The steel build gives a consistent response during repeated use, whether holding a tiny component in place, shifting a detail by a fraction, or guiding a decal into position. A wide, flat handle section adds control during light pressure changes, which matters when working with delicate pieces that need steady, measured movement rather than force. On a modelling bench, these tweezers fit naturally into tasks such as placing fine detail parts, lifting small pieces from a tray, or making small corrections before adhesive sets. They also suit careful craft and electronics handling where accuracy, reach and a clean grip matter more than bulkier hand tools. Warning! Not suitable for children under 14 years.
Model-making tools
HG Tweezer Grip Scissors, hobby scissors
300074157€28.99
HG Tweezer Grip Scissors bring compact control to close modeling cuts with a push-together action that keeps the hand position clear of the working area. The stainless steel blades are short at about 12 mm, which helps place each cut with accuracy on small surfaces where larger scissors can feel obstructive. The mechanism follows the same grip principle used on the Mini 4WD Curved Scissors in Item 74151, using pressure on the grips to open and close the blades. At 115 mm in total length, the tool stays easy to guide around corners, edges and narrow sections. The blade shape and size suit trimming vacuum molded bodies, cutting decals, shaping stickers and preparing masking tape for paint lines. Stainless steel construction gives the cutting edges a clean, consistent feel across repeated hobby tasks. On a workbench beside a scale model, the compact format fits naturally into detail-focused steps such as body trimming, decal preparation and masking work before painting. Between sessions, the included cap covers the blade area for tidy storage in a drawer, case or toolbox.
Model-making tools
HG Tweezers Grip Tip, precision hobby tweezers
300074155€28.99
The HG Tweezers Grip Tip is a precision stainless steel tool made for handling minute components during static model assembly and R/C model maintenance. Its pronged tip geometry is built to grip small shafts, wire and rounded parts with more control, bringing steadier handling to close, detailed work at the bench. Each tip combines 2 prongs with a central groove, a layout designed to reduce the chance of parts slipping out from the front or the sides while being lifted, aligned or removed. The documented grip examples are concrete: 3 mm diff balls and small-diameter shafts can be held securely, and the tool is suited to assembling and dismantling R/C model gear differential units. Defined grip thresholds add clarity in use, with shafts or wire held sideways from 1 mm diameter, rounded objects from 2 mm diameter, and shafts or wire held lengthways from 1.5 mm diameter. The stainless steel body uses SUS410 material. On a model bench, that means cleaner placement of tiny drivetrain parts, more controlled retrieval of narrow metal pieces, and steadier handling when a fingertip is too large for the space. The slim straight profile also helps when working between closely packed components where direct access is limited. Warning! Not suitable for children under 14 years.
Model-making tools
Long Nose Pliers with Cutter for RC Kit Assembly
300074002€29.99
Long Nose Pliers with Cutter bring precise control to RC kit construction, combining narrow jaws for close access with a built-in cutting edge for wire work at the bench. The tapered nose reaches confined points around small assemblies, helping with gripping, bending and positioning when fingers or broader pliers would block the view. The steel body is made for repeated hobby use, and the polished head pairs with black handles for a clear, workshop-focused layout. Serrated gripping sections near the center of the jaws help hold small parts more securely during adjustment, while the cutter is stated for brass or steel wire used in model and radio control work. This makes the tool useful across several common build stages, from preparing wire lengths to aligning compact components before fastening. On a model bench, the slim profile supports careful handling in crowded areas where accuracy matters more than force. During electronics-related tasks, the same shape helps guide wire ends, hold small fittings and make controlled cuts without switching between separate gripping and trimming tools.
Model-making tools
Mini Bending Pliers for PE, hobby tool
300074084€36.99
Mini Bending Pliers for PE bring controlled shaping to small photo-etched parts where no clear bending line is present. The flat metal tip grips delicate sections securely while helping protect the surface from scratches, so fine details can be adjusted with a cleaner finish during model work. The tool is designed for close, precise handling on etched metal parts that need careful alignment before fitting. Straight lines up to 15 mm can be bent at one time, which helps when working on narrow flanges, tabs and edge sections that benefit from an even fold. When a right-angle bend tends to spring back, the jaw shape supports the section during the bend and makes the angle easier to form without relying on special techniques. Comfortable grips add steadier hand pressure during repeated adjustments and detailed assembly sessions. On the workbench, the pliers suit tasks such as shaping cockpit details, brackets, covers or other fine add-on parts before they are attached to a model. The tool can also be used with other materials such as plastic, giving added utility for small-scale hobby and craft jobs that call for neat, accurate bends. Warning! Not suitable for children under 14 years.
Model-making tools
Model Cleaning Brush Anti-Static, hobby tool
300074078€28.49
The Model Cleaning Brush Anti-Static is a dedicated hobby tool for keeping display models clear of dust, shavings and light debris without crowding delicate surfaces. Its slim metallic handle carries a wide brush at one end and a capped mini brush at the other, giving model care a precise, compact format that sits neatly beside paints, cutters and finishing tools. The main brush uses long fibers to move around raised details, fine edges and fragile assemblies where a cloth or larger duster can catch. Static control is built into the fibers, helping reduce the charge that draws dust back onto freshly cleaned surfaces. The capped mini brush adds a second cleaning option for recessed sections, panel lines and other narrow areas that need a smaller contact point. This 2-way arrangement supports regular maintenance on scale models after building, painting or display. On a shelf, in a cabinet or at a workbench, the brush suits quick touch-ups before photography, after sanding, or during routine display care. It also works on other household objects where light dust settles into small details, with the cap helping keep the smaller brush protected between uses. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler Knife pro Narrowchisel, hobby blade set
300074159€8.49
The Modeler Knife pro Narrowchisel is a replacement blade set for detailed trimming work in confined areas. With 5 narrow chisel blades at 0.55 mm thickness, the set supports controlled removal of small protrusions on flat surfaces where a broader edge can be harder to place cleanly. The slim stepped tip gives the blade a focused contact point for careful cleanup on molded parts. Its narrower format is specifically positioned below the already available 4 mm chisel blade in the range, which makes this version better suited to close-set ribs, recessed sections and other tight spaces on model components. The chisel shape is intended for shaving away excess material rather than piercing, so it lends itself to refining edges, leveling raised marks and tidying mold-related irregularities with measured pressure. The included storage case keeps the blades together between work sessions. On the bench, this blade set fits tasks such as cleaning flat molded panels, refining ribbed structures and removing small surface protrusions before painting or further assembly. It suits model-making workflows that call for a narrow metal edge with more reach into restricted sections than a wider chisel format.
Model-making tools
Modeler Knife Pro Scraper, hobby blade set, 0.5 mm
300074161€8.49
The Modeler Knife Pro Scraper brings a dedicated scraping profile to model finishing work, with 2 blades shaped specifically for changing surface texture and reducing surface thickness in a gradual, controlled way. At 0.5 mm thick, each blade offers a defined edge geometry that suits careful refinement on parts where a standard cutting blade would remove material too abruptly. The scraper-shaped end is intended for pull strokes, drawing the blade toward the body to shave away a selected section of the surface. That motion helps keep adjustments deliberate when refining contours, easing down raised areas or preparing a part for a smoother transition into surrounding detail. Because the blade is built for scraping rather than slicing, it suits tasks where the goal is measured removal across a wider area instead of a cut line. The set format keeps a second matching blade ready for ongoing bench work or replacement. On the workbench, this tool fits naturally into detailing, correction and surface-prep stages between shaping, test fitting and final finishing. It can be used when a panel, edge or molded section needs gradual reduction, or when a plain surface calls for a changed texture before the next build step.
Model-making tools
Modeler Knife Pro Scriber, blade set, 0.4 mm
300074160€8.49
The Modeler Knife Pro Scriber blade set brings fine 0.4 mm scoring to detailed model work, with 5 replacement blades sized for narrow lines and careful surface marking. Each blade is designed for pull-stroke use, so the cutting edge scores the material as it is drawn back, giving a controlled action for panel lines, trimming guides and measured cut paths. Its slim profile is thinner than the Plastic Scriber II Item 74091, which makes this version especially suited to precise, closely spaced detail where a broader groove would look heavy. The blade format also supports score-and-break work on plate material: mark the line, deepen the pass, then separate the section to the required size. That makes the set useful not only for surface engraving but also for shaping custom parts during scratchbuilding and modification work. The 5-piece pack keeps matching blades ready for repeated bench sessions, whether the task is refining engraved detail, preparing clean edges on sheet stock or cutting plate sections for a tailored fit. A storage case is shown in the product presentation for organized handling between uses.
Modelling tools for precision work
The right tools are essential for success in model building. Precision, efficiency, and clean execution largely depend on the quality of the tools you use. Whether you're working on intricate details or cutting and shaping parts, the appropriate tools ensure every model-building project is a success. In our category, you'll find a wide selection of model-making tools designed to help both beginners and professionals complete their projects with the utmost accuracy and precision.
High-quality model kit tools
Our model kit tools are specifically designed to meet the high demands of the hobby. From fine brushes and precision tweezers to powerful drills and knives, we offer everything you need for detailed work on your models. Additional tools like files, scissors, cutting mats, side cutters, and pliers are perfect for making precise cuts, achieving smooth surfaces, and ensuring strong connections. These high-quality tools support you in completing even the most demanding model-building projects neatly and accurately.
Tool sets for beginners and professionals
We offer comprehensive model-building tool sets for builders of all experience levels, containing everything you need to start or continue your projects. Our sets include knives, side cutters, and files – ideal for working on and shaping various components. These model kit tool sets are perfect for staying well-equipped and working efficiently, whether you're just starting out or already a seasoned pro. With one of these sets, you'll always have the right tool on hand.
Achieve success with Tamiya model kit tools
Explore our extensive selection of model kit tools and find exactly what you're missing for your projects. From individual tools to complete model-building tool sets, we cater to both beginners and experienced builders. Browse through our category and discover the perfect tools for your model-building needs.