Model kit tools
Model-making tools
40ml Square Bottle Holder 80x80mm (1)
300087202€3.89
Article number: 300087202 Product: 40ml Square Bottle Holder 80x80mm (1) Cement or other modeling aids accidentally spilling across your workbench could spell danger for your model and other materials – reduce the risk of accidents with this simple sponge holder, which is designed to fit snugly around the 40ml square bottles used for Tamiya Cement and other products, limiting the chance of their falling over if knocked. Item Contents/Information • Bottle Holder x1 • Use the included tab to link multiple holders together. • Material: PE sponge • Dimensions: 80mm x 80mm x 12mm
Model-making tools
Alligator Clip for P. Stand (4)
300074528€5.99
Article number: 300074528 Product: Alligator Clip for P. Stand (4) Handy clips for holding newly cemented or painted parts. These can be used together with the Tamiya Painting Stand (ITEM 74522), Work Stand (ITEM 74064), or the new Bottled Paint Stand (74077). Alligator Clip for P. Stand*4
Model-making tools
Bending Plier for Photo Etched
300074067€34.49
Article number: 300074067 Product: Bending Plier for Photo Etched Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools to make using photo-etched parts easier than ever before. Purchase all 3 tools to vastly simplify your modeling work; it's as easy as 1-2-3! 1 - Cutting Out Parts - Use Modeling Scissors 2 - Removing Flash - Use Diamond File 3 - Bending/Shaping - Use Bending Pliers About the file - Diamond file is perfect for light carving of hard materials like stainless metal. - File won't snag on thin photo-etched parts and carves equally well in any direction. - File features half-circle shape for easy filing in hard-to-reach places. Bending Plier for Photo Etched Warning! Not suitable for children under 14 years.
Model-making tools
Craft Knife II
300074153€6.39
Article number: 300074153 Product: Craft Knife II • The handle has an ergonomic shape designed for ease of use and replacement of blades, etc. It is molded in easy grip black plastic, with the Tamiya Craft Tools logo in white. A clip is designed into the back. • A stainless steel blade has impressive resistance to rust. Simply remove, turn over and reset if you are lefthanded. • The end of the handle has a part that is detached by squeezing the tabs on either side and can be used to snap off dulled blade sections. • Features an auto-lock function to stop the blade slipping and the inherent dangers that brings. Warning! Not suitable for children under 14 years.
Model-making tools
Cutting Mat (A3)
300074076€27.49
Article number: 300074076 Product: Cutting Mat A3 450x320mm green Convenient for cutting plastic vans and making paper crafts. It is slightly larger than A3 paper and covers a wide range of work desks. Adopts a 3-layer structure in which a hard material is sandwiched between soft materials, so the cut end is inconspicuous and the blade remains sharp for a long time. It is a reversible type that can be used on both the front side printed with grids, angled lines, R curves, and circular lines and the back side with a solid color. Cutting Mat (A3)
Model-making tools
Cutting Mat α (A4/Blue)
300074149€15.99
Article number: 300074149 Product: Cutting Mat α (A4/Blue) This is a new size of cutting mat in the same easy-use, odorless material as Item 74142 (A5 size) and Item 74144 (A3 half-size). A4 is a happy medium of compactness and workspace, and this mat has an array of useful markings to help with your model making activities! • Dimensions: 220mm x 300mm x 2mm thickness. The surface area slightly exceeds A4 in length and width. • Made from semi-transparent blue-green resin with virtually zero odor. • 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks. • Markings printed on the front side include: useful grids, increment angles, and curved and circular markings. • Features a scale ruler for easy switching between 1/1, 1/24, 1/32, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips. • Reverse side is left plain.
Model-making tools
Cutting Mat α (A5/Blue)
300074142€10.29
Article number: 300074142 Product: Cutting Mat α (A5/Blue) This is a new size of cutting mat in the same easy-use, odorless material as Item 74142 (A5 size) and Item 74144 (A3 half-size). A4 is a happy medium of compactness and workspace, and this mat has an array of useful markings to help with your model making activities! • Dimensions: 220mm x 300mm x 2mm thickness. The surface area slightly exceeds A4 in length and width. • Made from semi-transparent blue-green resin with virtually zero odor. • 3-ply mat features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity while leaving minimal cut marks. • Markings printed on the front side include: useful grids, increment angles, and curved and circular markings. • Features a scale ruler for easy switching between 1/1, 1/24, 1/32, 1/35 and 1/48, plus handy markings to aid in the cutting out of thin masking tape strips. • Reverse side is left plain.
Model-making tools
Diamond File for Photo Etched
300074066€11.29
Article number: 300074066 Product: Diamond File for Photo Etched Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools to make using photo-etched parts easier than ever before. Purchase all 3 tools to vastly simplify your modeling work; it's as easy as 1-2-3! 1 - Cutting Out Parts ------------> Use Modeling Scissors 2 - Removing Flash -------------> Use Diamond File 3 - Bending/Shaping ------------> Use Bending Pliers About the File Diamond file is perfect for light carving of hard materials like stainless metal. File won't snag on thin photo-etched parts and carves equally well in any direction. File features half-circle shape for easy filing in hard-to-reach places. Diamond File for Photo Etched Warning! Not suitable for children under 14 years.
Model-making tools
E-Ring Tool 2 mm
300074032€11.29
Article number: 300074032 Product: E-Ring Tool 2 mm This tool for 2mm E-rings is extremely useful during construction and maintenance of RIC models. The unique shape of the specially designed tip makes it easy to attach and remove tiny E-rings. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Saw blade III 0,15mm thick
300074105€11.29
Article number: 300074105 Product: Fine Craft Saw blade III 0,15mm thick In some situations, the cut made by a normal modeling saw may be too wide, leading to unwanted changes to the length of the part. This set of saws solves this problem as they are made from 0.15mm thick etched metal. The grips of the saws can be folded over and attached to a Modeler's Knife (Item 74040) for precise cutting control. The set includes four types of saw blades which can be used for a variety of situations.
Model-making tools
Fine Engraving Blade 0.15mm
300074145€33.49
Article number: 300074145 Product: Fine Engraving Blade 0.15mm Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 5 thicknesses to meet your modeling needs. • 0.15mm Fine Engraving Blade x1 • Total length: 25mm. Shank diameter: 2mm. • Recommended for use with dedicated holder: Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112). • Simply hold at a 45- to 60-degree angle and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result. • Comes in a case that can hold up to ten blades. • A color-coded marking on the shank allows easy identification of blade thickness Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.1mm
300074135€33.99
Article number: 300074135 Product: Fine Engraving Blade 0.1mm Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.3mm
300074137€32.99
Article number: 300074137 Product: Fine Engraving Blade 0.3mm Engraving to emphasize details such as panel lines, or even add custom detail is a popular advanced modeling method. Tamiya makes this advanced modeling technique easy with its line-up of engraving blades. These fine engraving blades are made from tungsten carbide, and offer a smooth, consistent finish. They are available in a choice of 4 thicknesses to meet your modeling needs. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Needle 20°
300074148€23.49
Article number: 300074148 Product: Fine Engraving Needle 20° As its name suggests, this fine engraving needle has a pointed tip rather than the hooked one seen in our engraving blades. This allows easier scribing of curved details. • Fine Engraving Needle x1 • Total length: 25mm. Shank diameter: 2mm. Needle point angle is 20°. • Crafted from cemented carbide, with a precision finish. • Recommended for use with dedicated holder: Item 74139 Engraving Blade Holder. Also compatible with Fine Pin Vise D (Item 74050) and D-R (Item 74112). • Simply hold and pull lightly across the surface to score it. Repeat as necessary to achieve a clearly-defined result. • Comes in a case that can hold up to ten needles, and separately sold engraving blades. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise D (0.1-3.2mm)
300074050€23.99
Article number: 300074050 Product: Fine Pin Vise D (0.1-3.2mm) Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill bits under 1 mm diameter. Fine Pin Vise D (0.1?3.2mm) Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise D-R (0.1-3.2mm)
300074112€24.49
Article number: 300074112 Product: Fine Pin Vise D-R (0.1-3.2mm) The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. - Compatible with drill bits of sizes from 0.1-3.2mm. - Rotating grip end features built-in ball bearings for smooth movement. - Made from nickel-plated brass, with elastomer grip. - Features metallic sticker with the Tamiya twin star logo and wording "PIN VISE". - The rubber grip is engraved with the wording "TAMIYA". Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.2mm Shank 1mm (1)
300074113€7.99
Article number: 300074113 Product: Fine Pivot Bit 0.2mm Shank 1mm (1) This fine pivot drill bit allows the drilling of precise holes. Pivot drill bits have bits which are thinner than their shank, and they provide greater resistance against shattering while offering decreased deviation. • Durable material is shatter-resistant. • High-quality bit finish delivers excellent results. • Compatible with 74050 Pin Vise D, 74051 Pin Vise S and 74112 Pin Vise D-R.
Model-making tools
Handy Craft Saw II
300074111€12.49
Article number: 300074111 Product: Handy Craft Saw II This handy tool is perfect for modifying plastic models or Mini 4WD machines, as well as woodcraft. Its blades are slightly thicker than Item 74018 Mini Razor Saw and therefore less prone to distortion or warping. The item includes 2 blades of different width, and features fine teeth which enable it to cut through a variety of materials while leaving a smooth finish. The 2 blades can be inserted into the included plastic grip, which features the Tamiya logo and "TAMIYA CRAFT TOOLS" in printed lettering. About the Item • Includes wide carbon steel blade x1 and slim carbon steel blade x1 • Both blades are of .35 mm thickness. • Wide blade length: 46 mm • Slim blade length: 43 mm Warning! Not suitable for children under 14 years.
Model-making tools
HG Angled Tweezers
300174047€18.99
Article number: 300174047 Product: HG Angled Tweezers These precision made stainless steel tweezers are ideal for handling small, delicate plastic model parts. An angled type which can access hard to reach areas and a straight type which directly transmits finger movements to the tip for optimum control are available.
Model-making tools
HG Tweezer Grip Scissors
300074157€28.99
Article number: 300074157 Product: HG Tweezer Grip Scissors These handy scissors are activated by pushing the grips together, for a safe cutting process: the same mechanism as used on the Mini 4WD Curved Scissors in Item 74151. Short, durable blades make them ideal for modeling uses such as on Mini 4WD vacuum molded bodies, decals, stickers, masking tape and more. You’ll wonder how you ever did without them! Item Contents/Information • HG Tweezer Grip Scissors x1 • Stainless steel blades provide a long lasting, quality cut. • Activated by pushing the grips together, for an easy action and minimum interference from hands in the cutting process. • A safety cap is also included to allow safe storage. • Total length: 115mm; blade length: 12mm (approx.).
Model-making tools
HG Tweezers Grip Tip
300074155€28.99
Article number: 300074155 Product: HG Tweezers Grip Tip • HG Tweezers (Grip Type Tip) x1 • Tweezers are crafted in stainless steel. • The use of 4 extrusions on the tip is a relatively unique design, and allows for secure grip of small components such as shafts and wire. Warning! Not suitable for children under 14 years.
Model-making tools
Mini Bending Pliers for PE
300074084€36.99
Article number: 300074084 Product: Mini Bending Pliers for PE These bending pliers are perfect for small photo-etched parts which have no identifiable bending lines. The flat tip of these pliers will give any modeler peace of mind as even if the PE parts are held firmly, they will not be scratched. When bending PE parts at right angles, sometimes the bent section will spring back, but these pliers make the bending of such angles easy without the need for special techniques. The pliers come with very comfortable grips. It is possible to bend straight lines up to 15mm at a time with this tool and it can also be used with other materials such as plastic. Mini Bending Pliers for PE Warning! Not suitable for children under 14 years.
Model-making tools
Modeler Knife pro Narrowchisel (5)
300074159€8.49
Article number: 30074159 Product: Modeler Knife pro Narrowchisel (5) • Narrow Chisel blades x5 • 0.55 mm thick. • Narrower than the already available chisel blade (Item 74101, Width: 4mm), and hence can be used in tighter spaces • Suitable for removing protrusion from flat surfaces of ribs and molds etc.
Model-making tools
Modeler Knife Pro Scraper (2) 0,5mm
300074161€8.49
Article number: 300074161 Product: Modeler Knife Pro Scraper (2) 0,5mm • Scraper blades x 2 • Features a design with a scraper shaped end. Great for altering surface textures or altering surface thickness gradually. • 0.5 mm thick. • Pull towards yourself to scrape away a section of the surface.
Model-making tools
Modeler Knife Pro Scriber (5) 0,4mm
300074160€8.49
Article number: 300074160 Product: Modeler Knife Pro Scriber (5) 0,4mm • Scriber blades x 5 • 0.4 mm thick. • Pull towards yourself to score the subject material. • Can be used to score then break off plastic plate to your desired size. • Thinner than Item 74091 Plastic Scriber II. • Suitable for very precise and detailed work.
Model-making tools
Modeling Flat Chisel Blade 2mm
300074143€22.49
Article number: 300074143 Product: Modeling Flat Chisel Blade 2mm • Material: High-Speed Steel • Length: 25mm, blade width: 2mm, diameter: 2mm. • A handy case is included for storage of the blade when not in use. • Thicker protrusions should be filed down first, and this blade used for their final removal. • Compatible with Item 74139 (recommended) and Item 74112 Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template Round 1-12.5
300074150€9.59
Article number: 300074150 Product: Modeling Template Round 1-12.5 Tamiya's engraving blades are a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe curves and circles with ease thanks to this new set of photo-etched stainless steel template sheets! Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 3 sheets of circular templates ranging from 1mm to 12.5mm diameters, in 0.25mm intervals. • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm) Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template RR 1-6
300074154€9.99
Article number: 300074154 Product: Modeling Template RR 1-6 Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use them to scribe rounded rectangles with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round templates in Item 74150. Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 3 sheets of rounded rectangle templates ranging from 1mm to 6mm in width, and 1.5mm to 12mm in length. The smallest measures 1mm x 1.5mm, and the largest 6mm x 12mm. • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm). Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template Square 1-10
300074156€9.59
Article number: 300074156 Product: Modeling Template Square 1-10 Tamiya's engraving needle is a fine addition to any modeler's tool kit, allowing scribing of fine, precision lines. Now, you can use it to scribe squares with ease thanks to this new set of photo-etched stainless steel template sheets, which follows on from the round and rounded rectangle templates in Item 74150 and 74154 respectively. Item Contents/Information • Photo-Etched Template Fret x1 • The fret includes 4 sheets, each with square templates in 0.5mm length increments between 1mm and 10mm. Every sheet has a different corner style for its squares: right angle, R10%, R15% and R20%. The radius of rounded corners is calculated by multiplying square side length by R (10mm square x R10% = 1mm radius corners). • Templates are manufactured in 0.1mm thickness stainless steel, allowing you to bend it against convex surfaces such as aircraft fuselage pieces (minimum target component radius is 30mm)
Model-making tools
Needle Nose W/Cutter II
300074146€39.99
Aticle number: 300074146 Product: Tamiya Spitzzange m. Cutter II These needle nose pliers are for use on R/C, static model products and more. Their long, slimline jaws provide superb grip. The pliers can be used as one would tweezers, and are also suitable for bending and cutting materials such as brass wire. • Jaws are chromium-vanadium steel. Their slimline form makes them ideal for work in confined spaces and with delicate components. • Handles have a comfortable and safe non-slip PVC grip. • Features the twin star logo on the hinge joint. • Edges inside the hinge can be used to cut mild steel wire up to 1.2mm diameter and brass wire up to 1.3mm.
Model-making tools
Paint Jar Stand
300074077€27.49
Article number: 300074077 Product: Paint Jar Stand Rotating two-tier paint jar stand lets you organize your paints clearly for easy access. It can store up to 7 jars of acrylic "mini" or 9 jars of enamel paints per tray. Each tray has a small groove along its edge, allowing you to also use this as a drying stand simply by using alligator clips (4 included) to hold newly painted parts. *PAINT NOT INCLUDED Paint Jar Stand Warning! Not suitable for children under 14 years.
Model-making tools
Paint Stirrer Metal (2)
300074017€6.39
Article number: 300074017 Product: Paint Stirrer Metal (2) This stainless steel tool is designed for stirring bottled paints, and for blending different color shades. One end is shaped like a small spoon, while the other is flat, like a spatula. Tool length is 15cm. Includes two stirrers. Warning! Not suitable for children under 14 years.
Model-making tools
Plastic Scriber II
300074091€11.79
Article number: 300074091 Product: Plastic Scriber II This tool is perfect for tasks such as scoring and cutting plastic sheets, creating mold lines on model parts, and modifying Mini 4WD machines. The blade can be retracted after use and two spare blades are also stored inside the handle. Warning! Not suitable for children under 14 years.
Model-making tools
Quick Hose Joint
300074561€26.49
Article number: 300074561 Product: Quick Hose Joint Repeatedly hooking up your airbrushes to the hose and air supply can be something of a pain when you need more than one airbrush for a job. Say goodbye to those worries, with the Quick Hose Joint, which allows you to connect airbrush and hose with a single touch – simply slot in to connect and slide the center section to detach! Item Contents/Information • Quick Hose Joint x1 • Plugs x2 • Joint size: Type-S (PF-1/8) • Compatible with all Tamiya Spray-Work series airbrushes. Spray-Work Basic Airbrush requires separately sold Connector Joint (Item 74536). • Not compatible with Tamiya Badger airbrushes, air cans or Basic Compressor. Warning! Not suitable for children under 14 years.
Model-making tools
Side Cutter for Plastic
300074001€37.99
Article number: 300074001 Product: Side Cutter for Plastic This is a precision side cutter for removing parts from sprue without damaging them. Developed exclusively for plastic modeling, the impact resistant chrome vanadic alloy material was chosen for long life. High quality vinyl covering assures good grip. Side Cutter for Plastic Warning! Not suitable for children under 14 years.
Model-making tools
SP Side Cutter (Slim Jaw)
300074123€47.99
Article number: 300074123 Product: SP Side Cutter (Slim Jaw) This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance. •Length: 115mm. •Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge. •PVC grip covers ensure that the side cutters stay firmly in your hand during use. •The tool is marked with the twin star logo and TAMIYA CRAFT TOOLS FOR PLASTIC Warning! Not suitable for children under 14 years.
Model-making tools
SW Quick Hose Joint Plugs (2)
300074562€11.99
Article number: 300074562 Product: SW Quick Hose Joint Plugs (2) These are replacement plug sections for the Quick Hose Joint, which allows you to (dis)connect airbrush and hose with a single touch – simply by sliding its center section! Item Contents/Information • Quick Hose Joint Plugs x2 • Compatible with Item 74561
Model-making tools
Tamiya Basic Tool
300174016€31.49
Article number: 300174016 Product: Tamiya Basic Tool This set contains the basic, indispensable tools for model and craft work: A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all neatly packed in a handy plastic case.
Model-making tools
Tamiya Craft Spatula Width 20mm
300087112€3.39
Article number: 300087112 Product: Tamiya Craft Spatula Width 20mm This Craft Spatula features a new shape which allows for easy mixing and application of paints. This spatula is made from POM (a polyacetal resin) which makes it highly resistant to water and chemical damage and can also be used with the application of Epoxy Cement and putty. Warning! Not suitable for children under 14 years.
Model-making tools
Tamiya Craft Tweezers
300074080€22.49
Article number: 300074080 Product: Tamiya Craft Tweezers - These are craft tweezers that are most suitable for papercraft work. - The foremost part has an original TAMIYA design. - The design helps improve effectiveness in gluing and the bending of the paper, as well as the drying process. - It can also be used with the application of stickers and decals. - Length: 140 mm, has a SUS410 stainless hairline finish. Warning! Not suitable for children under 14 years.
Model-making tools
TAMIYA curved Scissors for PC
300074005€19.49
Article number: 300074005 Product: TAMIYA curved Scissors for PC These quality scissors come in handy when trimming polycarbonate R/C car bodies. The curved blades enable easy access to body curves, and are made of high quality stainless steel for durability and long life. Curved Scissors Warning! Not suitable for children under 14 years.
Model-making tools
TAMIYA Cutting Mat DIN-A4 grau
300174056€16.29
Article number: 300174056 Product: Cutting Mat A4 320x225mm beige Creating a comfortable cutting work environment. A cutting mat with a sandwich structure in which a hard material is sandwiched between soft materials. The cut end is inconspicuous and the blade touches softly. The sharpness of the blade also lasts a long time. Lines such as angle lines, R curves, and circles were printed on the surface. The back side is a simple plain color, and it is a reversible type that can be used on the front side. Cutting Mat (A4)
Model-making tools
Tamiya Fin.CraftSaw PE-Blade 0,1mm (2x3)
300074097€11.79
Article number: 300074097 Product: Tamiya Fin.CraftSaw PE-Blade 0,1mm (2x3) These scribing saws are ideal for remaking details that are lost when cleaning up seam lines or deepening existing panel lines. Compared with Item 74094, the teeth of these saws are smaller and have a finer pitch. Both straight and rounded saw blades are included. The grips can be folded over for the saws to be used as they are, and they may also be attached to a Modeler's Knife (Item 74040). Made from 0.1mm thick stainless steel.
Model-making tools
Tamiya Fine Pin Vise (0,1-1,0mm)
300074051€14.79
Article number: 300074051 Product: Tamiya Fine Pin Vise (0,1-1,0mm) Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Pin Vise S is designed for use with drill bits under 1 mm diameter.