Motorcycle model kits 1:12

Model motorcycle kits 1:12

1:12 Honda CB1000F, plastic model kit

€44.99

This 1:12 plastic model kit captures the Honda CB1000F with the long, continuous lines that run from the fuel tank through the side panels to the tail. At 178 mm in length, 73 mm in height and 109 mm in width, the finished motorcycle has enough scale presence to show the roadster proportions clearly on a shelf or workbench. The bodywork uses a one-piece fuel tank and fender construction, while the optional headlight cowl allows different finishing directions based on the chosen marking version. Four marking versions are provided: Wolf Silver Metallic with a blue stripe, Wolf Silver Metallic with a grey stripe, Graphite Black, and the Japanese-market SE Wolf Silver Metallic version. Variant D adds dedicated radiator grille and quickshifter parts as well as its own decals. Small visual elements are handled with equal care, from the chrome-rimmed headlight area to the clear red taillight parts and masking stickers for the speedometer and fuel cap. The build suits careful painting and finishing sessions, with separate inner and outer brake disc parts that support more precise paint application. Vinyl tubing recreates clutch, brake and other lines, and the leather-texture seat surface adds another distinct finish contrast beside the synthetic rubber tyres. Tools, paints and modeling glue are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZF-R1M, plastic model assembly kit

€49.99

This 1:12 scale plastic model assembly kit recreates the 2018 Yamaha YZF-R1M, a circuit-focused motorcycle shaped by technology influenced by the YZR-M1 MotoGP bike. The compact, refined bodywork and the full fairing layout give the finished build the sharp stance of the 8th generation YZF-R1M, first released in 2015. The model belongs to the long-running 1/12 Motorcycle Series and marks a landmark year for the YZF-R1, its 20th anniversary in 2018. A multi-piece 4-cylinder engine forms the technical centre of the build, with fine depictions extending to the radiator, oil cooler and complex engine covers. Tubing is included to recreate various lines, adding extra depth around the engine area. Separate front cowl parts depict the headlights, position lights and inner cowl with crisp definition. A metal transfer for the Yamaha emblem is planned for inclusion, adding a sharp finishing touch to the completed machine. Screw-fixed construction joins major sections such as the engine, swing arm, front fork and upper cowl to the frame for accurate assembly across key areas. New synthetic rubber tyres depict Bridgestone Battlax RS10s with a realistic tread pattern, while the included display stand supports presentation once the motorcycle is complete. Cement and paints are required separately. Assembly time is stated as 600 minutes, giving the build room to unfold as a detailed bench project and a finished display model.

Model motorcycle kits 1:12

1:12 Ducati 888 Superbike '93, plastic model kit

€34.99

The 1:12 Ducati 888 Superbike '93 assembly kit brings a classic racing motorcycle into a focused scale build with a compact display footprint and the distinctive lines of a full-faired superbike. In this format, the single seat, low front profile and race body shape come together as a model that suits careful painting, decal work and clean final presentation. This plastic model kit is built around the Ducati 888 Superbike '93 designation and a 1:12 scale that gives small details enough presence without demanding a large display area. The build is intended as an assembly project, with 600 minutes stated for completion, making it a substantial bench session rather than a quick snap-together task. The source material behind the subject adds motorsport context from the 1993 season, linking the finished motorcycle to period superbike racing. Paints and tools are required separately. On the work surface, the project suits steady step-by-step progress, from preparing parts to painting body panels and applying the final markings. Once completed, the model sits naturally in a display setting where the fairing shape, wheel layout and racing stance can be viewed from multiple angles.

Model motorcycle kits 1:12

1:12 Honda NSR 500 Factory-Color, motorcycle model kit

€21.99

The 1:12 Honda NSR 500 Factory-Color motorcycle model kit brings Grand Prix racing character to the workbench through a full-fairing race bike finished in Honda factory livery. Red, white and blue panels, the number 3 race markings and period sponsor graphics shape a machine that looks ready for the paddock stand between sessions. The assembly kit format focuses attention on the motorcycle's racing structure rather than on a simplified silhouette. A tinted windscreen sits above the front fairing, while the front disc brake, chain drive and dual rear exhausts add the mechanical detail that gives this model its competition identity. White wheels contrast with the black seat and help the bodywork stand out once the decals are in place. Visible frame and suspension areas add depth around the fairing and tail section, so the finished build reads convincingly from more than one angle. With a stated assembly time of 600 minutes, this kit suits longer bench sessions where subassemblies, paintwork and markings can be handled with care. The finished motorcycle works well as a display piece on a shelf, in a motorsport collection or alongside other scale racing machines with a similar era and theme.

Model motorcycle kits 1:12

1:12 Honda RS1000, scale model kit

€33.99

The Honda RS1000 Endurance Racer arrives as a 1:12 scale model kit that brings a classic racing motorcycle into a focused build with clear display appeal. The long fairing, low riding position and endurance-racing silhouette give the finished machine a purposeful look that stands out on a shelf, desk or in a collection cabinet. This kit centers on the motorcycle itself rather than on extra accessories, keeping attention on the RS1000 form and the proportions that define this racing machine. The 1:12 scale offers enough presence to make the body shape and overall stance easy to appreciate once assembled. As a model kit, the hands-on process is the core of the experience, with each stage contributing to a finished replica that reflects the character of the original Honda racer. The racing theme also makes this a strong fit alongside other scale motorcycles and motorsport subjects. On a worktable, the build suits steady, detail-focused sessions where the shape of the fairing and the stretched race layout gradually take form. Once completed, the model works equally well as a standalone display motorcycle or as part of a broader two-wheel racing lineup.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S, plastic model kit

€54.99

This 1:12 plastic model kit captures the Ducati 1199 Panigale S in 2014 specification, bringing the sharp bodywork, compact superbike proportions and technical layout of the original machine into a detailed bench build. The finished model balances full fairing surfaces with visible mechanical areas, so the motorcycle keeps its sleek silhouette while still showing the engineering that defines the design. The build centers on key motorcycle structures such as the monocoque frame, the L-twin 2-cylinder engine and the suspension layout. Small screws secure the engine cowling, which can be removed after completion to reveal the engine beneath rather than hiding it permanently behind the bodywork. The rear section uses a metal damper with a metal coil spring, adding a different material finish to the suspension assembly. Markings and paint guidance support either a red scheme or a matte black Dark Stealth scheme, with red rim stripes and detail callouts helping the wheels, forks and body panels read clearly at 1:12 scale. On the shelf, the completed motorcycle can be presented on the single sided stand or on the rear wheel box stand, changing the stance from parked road machine to paddock-style display. Assembly takes 600 minutes. Cement, paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CB750F, motorcycle model kit

€24.99

This 1:12 motorcycle model kit recreates the Honda CB750F with the low handlebar stance, rear-set footrest layout and smooth line from fuel tank to tail that defined the road bike's early-1980s character. The finished display combines classic naked-bike proportions with visible mechanical structure, so the machine reads clearly from every angle on a shelf or workbench. The build centers on a detailed inline 4 engine made up of cylinder, carburettor and crankcase assemblies, with vinyl tubing sections cut to 1.5 cm, 2 cm, 2.5 cm, 4 cm, 4.5 cm, 5 cm, 8.5 cm and 9.5 cm for realistic routing across the frame and engine area. Front and rear tyres, 1.6 mm x 20 screws, 1.6 mm x 5 screws and a 50 cm vinyl tubing length are included in the kit contents. The bodywork can be finished in silver, red or black, and the decal sheet provides the matching striping sets for each body colour. Paints are required separately. Assembly unfolds across the engine, swing arm, mufflers, front fork, rear fender and fuel tank, giving each stage its own visual milestone as the motorcycle takes shape. On a display shelf, the chrome-look exhausts, disc brake layout, cast wheels and compact four-cylinder form create a strong period road-bike presence that suits classic motorcycle collections.

Model motorcycle kits 1:12

1:12 Honda CBR 1000-RR-R Fireblade SP model kit

€52.99

This 1:12 Honda CBR 1000-RR-R Fireblade SP plastic model assembly kit turns Honda's circuit-focused superbike into a detailed display build with crisp bodywork, visible mechanical structure and race-inspired presence. At 176 mm long, 68 mm wide and 96 mm high, the finished motorcycle carries the low, aggressive stance of the full-size machine while fitting neatly into a shelf or cabinet display. The model recreates the bike's aerodynamic form with special attention to the side cowl area, where the internal winglets are rendered as part of the fairing design. A detailed liquid-cooled 4-cylinder engine sits at the center of the build, supported by the frame, front fork, swing arm and muffler layout highlighted in the kit design. The headlight is screw-attached, and the side and under cowl sections can be removed after assembly to change how the motorcycle is presented. Metal-plated parts are used for the mirror surfaces, adding a bright contrast against the painted bodywork and darker chassis areas. Textured semi-slick tires, tread patterns and 2 marking options give the finished motorcycle a purposeful road-and-track character. Masking stickers support cleaner paint separation on shaped surfaces, while the included racing stand lifts the completed bike into a paddock-style display setting. Cement and paints are required separately.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition, model kit

€27.99

This 1:12 Honda Dax125 Tamiya Edition model kit captures the compact minibike stance of the full-size machine in a display scale that keeps the T-bone frame, long seat proportions and upright street-bike layout clearly visible. At 147 mm long, with a stated height of 67 mm and 103 mm in the source data, the finished build presents the Dax125 as a small-format motorcycle with distinct mechanical presence. The assembly breaks the bike into recognizable structures, with the engine, swing arm, front fork and muffler fixed to the frame by screws. Metal-plated parts are used for sections such as the muffler guard and side covers, giving those areas a separate finish from the surrounding components. A dedicated metal spring is supplied for the rear damper spring, and vinyl pipes reproduce accel wiring, the brake hose and the plug cord with finer line detail than rigid molded pieces. The kit also recreates the special helmet associated with the Tamiya Limited Edition styling. During the build, the molded blue, silver, black and clear parts help define the bike's layout before painting and detailing. Dedicated markings allow a choice between the normal version in pearl nebula red or pearl cadet gray and the Tamiya Limited Edition appearance. Paints and cement are required separately. On a shelf, desk or model display, the finished motorcycle brings together compact proportions, visible engine detail and road-bike character in a format suited to careful assembly and close-up viewing.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1100S Katana, plastic model kit

€24.99

This 1:12 plastic model kit captures the Suzuki GSX1100S Katana with the angular fairing, compact windscreen and long tank profile that defined the motorcycle when it appeared in 1980 and reached the public in 1981. The finished replica brings that sharp road-bike silhouette onto the workbench while giving the build real substance through mechanical detail and mixed materials. The 4-cylinder DOHC engine is a focal point, and the kit goes beyond the main block by adding ignition cords, brake pipes and instrument cables with vinyl tubing. The parts layout also includes front and rear tyres, decals, metal hardware and 80 cm of tubing for routing lines across the model. Star-shaped die-cast wheels, treaded synthetic rubber tyres and metal screws at points such as the wheel axles add structure and visual contrast across the chassis. Paints, cement and tools are required separately. During assembly, the Katana takes shape through distinct subassemblies such as the engine, rear swing arm, front fork, cowling and fuel tank, making the 600-minute build suited to model makers who enjoy detailed finishing work. Once completed, the combination of exposed engine areas, twin megaphone mufflers, disc brake detail and bold tank graphics gives the motorcycle a strong display presence from either side.

Model motorcycle kits 1:12

1:12 Ducati 916 Desmo. 1993, motorcycle model kit

€35.99

This 1:12 motorcycle model kit captures the Ducati 916 Desmo. 1993 with the sharp bodywork, low front cowl and race-bred stance that made the original machine stand out at the 1993 Milan Motor Show. The finished replica brings together the distinctive fairing shape, dual headlamp layout and the sculpted tank and seat section in a display scale that gives each line room to read clearly. At the center of the build is a detailed 916cc liquid cooled L-twin engine with Ducati's Desmodromic valve system, a layout that uses cam operation for both opening and closing the valves. The chassis reflects the original machine's engineering with a chrome molybdenum steel tubular frame, a mono-arm rear swing arm and a front fork assembly that builds up from separate components. Showa shock absorbers and Brembo brake calipers are part of the source machine specification represented by the model, alongside the aerodynamic cowl with engine air intake openings. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. During the build, the model moves through clearly defined subassemblies such as engine, exhaust, front fork, rear wheel, cowling and mirrors, giving each stage its own visual character on the workbench. Decals and detail painting add the final layer to the Ducati markings, while the completed motorcycle on its stand suits shelf display alongside other 1:12 scale road and racing machines.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati Superleggera V4, motorcycle model kit

€55.99

This 1:12 motorcycle model kit brings the Ducati Superleggera V4 into a compact display format with sharp superbike proportions, a 176 mm overall length and a 98 mm height. Set on the included racing stand, the finished model stretches to 198 mm and takes on the poised look of a machine prepared for the pit lane. The build focuses on the motorcycle's distinctive structure as much as its bodywork. The V4 engine sits within the frame as a separate screw-attached assembly, joined by the swing arm and front fork to give the model a layered mechanical layout. Side cowlings and the fuel tank can be removed after assembly, leaving the internal detail visible when the model is on display. Front and rear brake rotors feature hole detail, and the chain uses separate right and left sections to reproduce the look of individual rollers. Metal transfers give the mirrors a brighter reflective finish, while decals add the subtle red gradation and carbon fiber pattern seen on the side cowlings. On a shelf, desk or display case, the model reads clearly from multiple angles thanks to the front wing shapes, exposed chassis areas and race-bike stance. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Front Fork Set CBR1000RR-R Fireb., model kit

€30.49

This 1:12 Front Fork Set CBR1000RR-R Fireb. is a Detail-Up model kit created to give a motorcycle build a more intricate front end. Gold color anodized aluminum outer tubes and reservoirs combine with gold color plated brass inner tubes to bring a crisp metal contrast to the fork area, while the yellow coil spring adds a visible accent within the assembly. The set is intended for 300014138 and focuses on the fork structure rather than broad body changes, making it a targeted upgrade for builders who want more definition in a key mechanical area. Plastic fork bottoms are included alongside mounting material, so the parts work together as a dedicated front fork assembly. The mix of aluminum, brass and molded components creates variation in finish and texture across the completed section. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the separate tubes, spring and small hardware support careful, step-by-step fitting and finishing. Once installed on the matching 1:12 motorcycle model, the fork assembly gives the front profile a more technical look that suits close-up display and detailed scale presentation.

Model motorcycle kits 1:12

1:12 Honda CB 750F Custom Tuned, model kit

€27.49

The 1:12 Honda CB 750F Custom Tuned model kit turns a classic motorcycle shape into a focused scale build with a long, detailed assembly process. Over 600 minutes, the assembly kit develops from individual parts into a road-bike replica with a compact display footprint and the visual balance that makes 1:12 motorcycle subjects so appealing on a shelf or desk. The subject matter brings together several standout details from the full-size machine: a round front headlight, a black seat, alloy-style wheels, dual rear shocks, mirrors, handlebars and an exposed multi-cylinder engine layout. Blue striping across the white and silver bodywork adds contrast to the tuned street-bike look, while the black exhaust system gives the lower section a darker visual line. Paints are required separately for the finish, and the colour guidance in the data covers flat, gloss and metallic tones as well as clear orange and clear red for small lighting details. This model suits hobby sessions that focus on careful trimming, painting and final display rather than quick assembly. Once completed, the Honda CB 750F Custom Tuned works well as a standalone motorcycle model or as part of a broader 1:12 collection with other road and racing machines.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CBR110XX Super Blackbird, model kit

€38.49

This 1:12 Honda CBR110XX Super Blackbird model kit recreates the 1996 supersport motorcycle with its long, aerodynamic fairing and tightly packaged mechanical layout. As the body panels, frame and liquid-cooled inline 4-cylinder engine come together, the finished machine takes on the low, fast profile that made the original road bike so distinctive. The kit is designed as a plastic assembly model, with separate sections for the suspension, front fork, exhaust, radiator and rear lighting. Small screws are used to mount the engine and cowling to the frame, which helps show how the major assemblies connect on the full-size motorcycle. Metal-plated parts are used for the dual headlight case, exhaust and front forks, adding a different surface finish from the painted body panels. The build also uses vinyl tubing in multiple cut lengths to represent hoses and lines around the engine and front end, while mesh inserts and decals add cockpit and fairing detail. Assembly takes about 600 minutes. On the bench, the model supports a measured, step-by-step build with visible progress across the chassis, engine and bodywork. Once completed, the motorcycle sits as a detailed display piece that suits a shelf, desk or cabinet with the unmistakable shape of the Super Blackbird.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda Monkey 125, motorcycle model kit

€36.49

The 1:12 Honda Monkey 125 motorcycle model kit brings the compact look of Honda's modern minibike into a scale build with crisp proportions and a finished size of 142 mm x 63 mm x 86 mm. Its small footprint and rounded styling cues give the completed motorcycle a lively display presence, from the headlight and speedometer area to the short wheelbase silhouette that made the Monkey line widely recognized. This assembly kit recreates the 2018-era Monkey 125 with a detailed 124 cc engine appearance, chunky tires and bright plated exterior trim. The fenders and light cases use metal-plated parts to capture the gleam of the full-size machine, while clear parts handle lens details with sharper definition. Damper springs and vinyl tubing add mechanical depth to visible lines and suspension areas, and decals supply the markings that complete the finish. Engine, swing arm, front fork and rear fender sections are secured to the frame with screws, giving these structural areas a firm connection during assembly. On the bench, the varied materials and small mechanical details create a focused motorcycle build with painting and finishing work across body, engine and trim sections. Once completed, the model suits shelf display, diorama placement or close-up viewing where the Monkey 125's cheerful shape, chrome accents and thick tire profile stand out from every angle.

Model motorcycle kits 1:12

1:12 Honda NSR500 '84, plastic assembly kit

€67.99

This 1:12 plastic assembly kit captures the early Honda NSR500 '84 in the form that won the 1984 Italian GP, bringing one of Grand Prix racing's most unusual motorcycle layouts to the workbench. At 166 mm long and 52 mm wide, the finished machine has a compact display footprint while still leaving room for the distinctive bodywork, exposed mechanical areas and race-focused stance to read clearly. Honda developed the NSR500 around a more powerful V4 engine, and that engineering shift shapes the whole model. The kit reproduces the radical arrangement with expansion chambers mounted high and the fuel tank placed below the engine, creating the silhouette that set this machine apart in the 1984 season. The frame, swing arm and tank are rendered in aluminum tones, while the period racing livery combines white, blue and red body panels with a red front fender and black wheels. Small screws are used to attach fairings and the chamber cover, and the fuel tank is detachable. A metal spring is used in the rear suspension, and racing stand parts are included for display. During assembly, vinyl tubing is cut to measured lengths to represent fuel lines and wiring, adding another layer of mechanical realism around the engine and front section. The completed motorcycle suits shelf display, close-up inspection and careful finishing with paint and markings, especially for builders drawn to 1980s Grand Prix machines and technically distinctive race bikes.

Model motorcycle kits 1:12

1:12 Honda RC166 GP Racer 1960, motorcycle kit

€89.99

The 1:12 Honda RC166 GP Racer 1960 recreates a landmark Grand Prix motorcycle as a detailed assembly kit, centring the build on the distinctive air-cooled 6-cylinder engine and the long, lean proportions of a classic racing machine. Red and silver FRP cowling, large-diameter drum brakes and silver spoke wheels give the finished model the visual character associated with the original bike. Fine construction details carry the model beyond a simple outline. The wheel design uses super-thin 0.4 mm metal-plated ABS resin spokes, while solid rubber tires with a triangular tread pattern add texture at ground level. The engine area is shaped with crankcase and cylinder fin detail, and the full layout is supported by the 1:12 scale, which gives small mechanical parts room to read clearly once assembled. Assembly is required, and the stated build time is 600 minutes. Paints, cement and tools are required separately. On the bench, the kit suits a measured build pace with time for painting, detail work and careful alignment of the spoke wheels and body sections. Once completed, the Honda RC166 stands out in a display setting with its multi-pipe engine layout, racing fairing and compact 1960s GP silhouette.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja H2R, motorcycle model kit

€58.99

This 1:12 scale motorcycle model kit recreates the Kawasaki Ninja H2R with the dramatic form and technical character that made the 2015 machine stand out. As a static display build, it focuses on the H2R's aggressive fairing lines, compact superbike proportions and the visual tension between black surfaces and the green trellis frame. The assembly model draws on key mechanical features of the original bike, including a 998 cc inline-4 with supercharger, and translates them into a detailed miniature with visible structure across the engine area, swingarm and body sections. Upper and side cowls, the engine and the swingarm are screw-attached, which gives the build a defined mechanical sequence as the motorcycle takes shape. Bare carbon fiber styling and mirrored black chrome accents from the original machine inform the finish, while the plated exhaust parts and metal transfers sharpen the final display look. Assembly is required, and the stated assembly time is 600 minutes. Cement and paint are required separately. On a shelf, desk or display case, the finished Kawasaki Ninja H2R sits with the focused presence of a track machine waiting in the paddock. The included racing stand supports that presentation, and the 1:12 scale makes the model easy to place alongside other motorcycle builds while still leaving room for the engine, frame and body details to read clearly.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Repsol Honda RC213V '14, motorcycle model kit

€57.99

The 1:12 Repsol Honda RC213V '14 captures the factory-works MotoGP machine from the 2014 season in a build focused on race-bike form, layered detail and authentic markings. Fairing lines, the merged front air intake duct and the compact tail section give the finished motorcycle the sharp stance of Honda's RC213V on the paddock stand. This assembly kit depicts a machine from the 1,000 cc MotoGP era, with the RC213V's aluminum double-tube frame and Honda 4-stroke V4 background reflected in the model's technical character. Separate parts shape smaller features with more definition, including the tail cowl-mounted camera, while the clear windshield section avoids cementing during that stage of the build. Parts to construct a racing stand are included, giving the completed motorcycle a display setup that matches pit-lane presentation. Assembly time is stated as 600 minutes. Paints and tools are required separately. During the build, masking stickers help with the multi-color finish, and the decal sheet brings the No.93 championship livery onto the fairing, tail and sponsor areas. Once completed, the model suits shelf display, motorsport collections and focused bench sessions centered on painting, decaling and final detailing.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Street Rider, plastic figure assembly kit

€18.29

Street Rider brings a relaxed motorcycle scene into the 1:12 Motorcycle Series with a plastic figure assembly kit shaped for realistic display beside street bike models. The sculpt uses 3D scanning techniques to capture natural facial structure, layered riding gear and the folds and creases of the jacket, hoodie, jeans and gloves, so the finished figure adds a convincing human presence to a parked bike or workshop setting. The kit supports 2 distinct character moments rather than a single fixed stance. One build shows the rider helmeted and pulling on his gloves, ready to mount the bike. The other shows him just off the machine, holding the helmet and wearing a wooly hat. Parts are also provided for either a half helmet or a three-quarter helmet, with optional sunglasses and a visor to refine the final look. This mix of pose and accessory choices helps the figure match different motorcycle styles, from everyday street scenes to more detailed diorama arrangements. Set on the screw-affixed base, the finished rider stands securely for shelf presentation, photo setups or placement next to a completed 1:12 motorcycle build. Paints and cement are required separately. Motorcycle models are sold separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki RGV Gamma XR89, motorcycle model kit

€33.99

The 1:12 Suzuki RGV Gamma XR89 captures the compact stance and full-fairing shape of a late 1990s racing motorcycle in a scale model kit built for careful bench work and striking shelf presence. With the 1999 #10 race livery named in the data, the finished bike brings together aerodynamic body panels, a single racing seat and the focused silhouette that defines a Grand Prix machine. This assembly kit is supplied as an unbuilt model, so the build itself is the central part of the experience rather than a short setup step. The stated assembly time of 600 minutes gives room for deliberate progress across the fairing, wheels and smaller finishing stages. Paints are required separately. The 1:12 scale also supports visible mechanical and styling detail without pushing the model into an oversized display footprint, which suits hobby spaces, desks and enclosed shelves. The motorcycle format adds a different rhythm from car or truck kits, with the narrow frame, race seat and streamlined bodywork shaping each stage of the build. On a shelf, in a hobby room or alongside other racing subjects, the Suzuki RGV Gamma XR89 reads clearly as a competition bike through its low profile and track-focused body shape. During the build, the named 1999 version gives the painting and finishing process a concrete reference, turning the completed model into a specific machine rather than a generic road bike.

Model motorcycle kits 1:12

1:12 Yamaha XV1000 Virago, motorcycle model kit

€24.49

The 1:12 Yamaha XV1000 Virago model kit brings the long, relaxed lines of Yamaha's cruiser into a display scale that shows off both styling and mechanical detail. The finished motorcycle combines a low 715 mm seat height, pull-back handlebars and forward foot rests from the original machine into a silhouette that reads clearly on a shelf or in a collection. The full-size XV1000 Virago used a 981 cc V-twin with 70 hp and a 32 degree front wheel caster angle, extending the wheelbase to 1525 mm for straight-running stability, and those defining traits shape the character of this kit. Visible subassemblies such as the frame, rear swing arm, shock absorbers, front fork, muffler, fuel tank and electrical equipment cover give the build a clear mechanical sequence. Decal placement and paint references guide the finish for Yamaha markings, Virago scripts, clear orange indicators, a clear red rear light and gold-toned trim over chrome-finished areas. The included assembly kit also leaves room for careful work on smaller details such as brake lines, meter cable, clutch cable and backrest parts. On the workbench, the model supports a measured build with painting, fitting and final marking as separate stages rather than a quick snap-together session. Once completed, the center stand allows the motorcycle to rest upright for display, where the V-twin engine, stepped seat, backrest and cruiser geometry remain easy to appreciate.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZR-M1 '04, motorcycle model kit

€40.99

The 1:12 Yamaha YZR-M1 '04 assembly kit brings a MotoGP racing motorcycle onto the workbench with the low, streamlined stance, single-seat tail and compact fairing shape of the 2004 machine. In the finished display, the red, white, black and silver livery, tinted windscreen and rear paddock stand create the look of a bike prepared for the pit lane between track sessions. The build centers on the Yamaha YZR-M1 in 1:12 scale and uses the No.7 and No.33 race markings named in the set data. Visible sponsor graphics such as Yamaha, MOTUL, Yamalube, DID and NGK add period race detail to the bodywork and help the finished motorcycle read as a specific competition machine rather than a generic sportbike. Front and rear proportions, the exposed exhaust area and the contrast between the fairing surfaces and wheel sections give painting and decal work clear focal points across the model. Assembly kit contents are listed, and the stated assembly time is 600 minutes. Paints and tools shown in the reference material are not listed as contents. On a shelf, desk or display case, the completed motorcycle sits upright on its stand and shows its racing profile cleanly from the side. At the bench, trimming parts, finishing the fairing and applying the chosen number scheme turn the model into a focused scale-building project with a strong motorsport look.

Model motorcycle kits 1:12

1:12 1199 Panigale S Tricolore, model kit

€53.99

This 1:12 scale assembly kit depicts the Ducati 1199 Panigale S Tricolore, a commemorative version finished in the red, white and green scheme of the tricolore italiano national flag. The finished model brings the sharp, compact form of the superbike onto the workbench with a subject that stands out through both color and engineering. A key feature of the original machine was its 1,198cc L-Twin engine, and that same layout gives the model much of its visual identity. The design also reflects the bike's monocoque frame concept, where the engine is integrated into the structure rather than hidden within a conventional frame layout. The swing arm and damper unit connect directly into this arrangement, helping the replica communicate what made the full-size motorcycle such a notable design. With assembly required and a stated build time of 600 minutes, the kit supports a more involved build centered on the mechanical form of the bike. On the bench, the model suits builders who enjoy motorcycles with visible engineering and a strong real-world story behind the livery. Once completed, the Tricolore scheme and compact 1:12 proportions give the replica a striking presence for shelf display or close-up appreciation of the bike's structure.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S Tricolore, model kit

€53.99

This 1:12 scale model assembly kit captures the Ducati 1199 Panigale S Tricolore with its unmistakable red, white and green bodywork, turning a landmark superbike into a detailed bench project and a striking display piece. The Tricolore edition commemorates the 150th anniversary of Italian reunification, and that context gives the finished motorcycle a specific visual identity beyond a standard race-replica finish. The original machine's 1,198cc L-Twin engine is integrated into a monocoque frame, and that layout is carried into the model with closely observed structural detail. After assembly, the screw-fixed side cowls can be taken off again, making the inner construction visible without altering the outer shape of the bike. The rear suspension uses a metal coil spring, adding a distinct mechanical element to the damper area. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. On a shelf, desk or display case, the included racing stand holds the motorcycle upright and gives the finished build the stance of a paddock presentation. Cartograf decals supply the fine markings for fairings, logos, instrument details and trim, supporting an accurate finish whether the model is displayed with the bodywork in place or with the inner engineering on view.

Model motorcycle kits 1:12

1:12 Ducati Desmosedici #65, assembly model kit

€50.99

This 1:12 assembly model kit captures the 2004 Ducati Desmosedici #65 with the lean, aggressive form of a MotoGP racing motorcycle and the mechanical detail that makes the full machine rewarding to study on the bench. The layout follows hallmark Ducati engineering, pairing the truss frame with a V4 engine and a rear suspension swing arm attached directly to the crank case. Fine finishing details give the model much of its character. Plastic tubing is used to depict the accelerator, clutch and brake wiring, so the control areas read with the layered look of a real race bike rather than a simplified shell. The assembled motorcycle also supports an open display style: the side and seat cowling can be removed after assembly to expose the engine area and change the presentation from streamlined fairing view to mechanical cutaway effect. Assembly is required, with a stated build time of 600 minutes. On a shelf, in a display cabinet or beside other racing motorcycle builds, the synthetic rubber slick tires and sharply defined bodywork help the Ducati hold a convincing competition stance. The kit contains the assembly model kit itself. Due to sponsor's request, white marking decals are not included with this kit.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati Superleggera V4, model kit, Racing Kit

€55.99

This 1:12 scale model kit captures the Ducati Superleggera V4 in its Racing Kit specification, translating the motorcycle's track-focused conversion into a compact build with crisp visual contrast and competition hardware. At 176 mm long and 98 mm high, or 198 mm long with the racing stand fitted, the finished machine carries a low, purposeful silhouette that reads clearly on a shelf or in a display case. The racing conversion is expressed through dedicated parts such as the open carbon fiber clutch cover, racing filler cap, brake lever guard and side mirror hole covers. Right and left cowling caps, a carbon fiber swingarm cover with titanium slider, and the removed number plate treatment all help define the circuit setup. The clutch is split into 2 parts for simplified paint separation, and the parts breakdown is designed for smooth, precise assembly. Carbon fiber patterns are represented by decals, allowing the bodywork and selected components to reflect the layered finish of the full-size machine. On the bench, the model offers a focused painting and decal application project with clear visual changes between road and circuit specification. Once completed, the stand, slick tire setup and racing details give the motorcycle a paddock-ready presence suited to display alongside other 1:12 scale bikes or as a single centerpiece.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Front Fork Yamaha YZF-R1M Model Set

€29.99

This 1:12 Front Fork Yamaha YZF-R1M model set adds a more intricate fork assembly to the matching motorcycle build, shifting the front end from standard kit detail to a layout with separate tubes, caps and connectors. Metal and molded parts work together to give the fork area a sharper mechanical presence when the bike is viewed from the front or side. The set is designed for the Yamaha YZF-R1M base kit 300014133 and focuses specifically on the fork structure rather than the full motorcycle. Anodized aluminum immersion tubes and the compensating holder introduce a distinct metallic finish that differs from molded kit surfaces. Dedicated metal parts also depict elements such as the reservoir tank and fork tops, while the smaller pieces break the assembly into more realistic subcomponents. The damper spring is finished in yellow instead of the black used on the standard kit part, bringing the fork closer to the look described for this version. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the separate fork elements support careful fitting, painting and alignment work around one of the most visible areas of the bike. Once installed on the matching 1:12 Yamaha YZF-R1M, the upgraded front assembly gives close-up photography, shelf display and detail-focused builds a more technical fork presentation.

Model motorcycle kits 1:12

1:12 Honda CBR1000RR-R FIREBLADE SP, model kit

€49.99

This 1:12 plastic model assembly kit recreates the Honda CBR1000RR-R FIREBLADE SP 30th Anniversary as a detailed display motorcycle with a compact 176 mm length, 68 mm width and 96 mm height. The finished model stretches to 191 mm long and 97 mm high when placed on the included racing stand, giving the superbike silhouette a lifted paddock look that suits shelf or desk display. The build centers on major motorcycle structures such as the engine, swing arm, front fork and muffler, which attach to the frame with screws. That construction method gives the model a clear mechanical layout while supporting precise placement of the main assemblies. A choice of pillion seat or optional single seat cowl changes the rear profile to match different display preferences. The side cowl, under cowl and fuel tank cover can be removed after completion, opening up views of the inner structure and making the finished motorcycle more interesting to examine from multiple angles. Masking stickers support the paint job on smaller sections and color separations, while paints and cement are required separately. On a workbench, the combination of removable panels, screw-attached main units and detailed exterior surfaces creates a focused motorcycle build with plenty to study during each stage. Once completed, the tricolor graphics, treaded tires and racing stand give the model a strong showroom and pit-lane presence.

Model motorcycle kits 1:12

1:12 Honda VFR 750R 1987, plastic model kit

€30.99

This 1:12 plastic model kit recreates the Honda VFR 750R from 1987, a road-legal machine developed from the RVF750 endurance racer and known for its tightly packaged, competition-focused design. The finished motorcycle brings that character into scale with a full fairing, clear windscreen, twin round front headlights, mirrors, white wheels and a large exhaust that define the bike's unmistakable silhouette. The original 748cc liquid-cooled V4 with 16 valves was engineered to stay compact, and that compact layout shapes the model's proportions as well. Structural features from the real machine are part of the subject itself, including the twin-spar aluminum box frame, the single-sided Pro-Arm rear swing arm and the center-lock rear wheel hub. Honda's 1987 machine stood out for its use of advanced materials such as titanium, carbon-fiber, kevlar and magnesium, and the model reflects that high-spec concept through its sharply defined race-bred bodywork and mechanical layout. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the build suits careful trimming, painting and decal work; once completed, the bike sits naturally as a display piece in a motorcycle collection. Radio gear is not part of this kit, and the included contents are the assembly kit itself.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja H2 Carbon, plastic model kit

€52.99

This 1:12 scale plastic model assembly kit captures the Kawasaki Ninja H2 Carbon with the compact, aggressive proportions of the road bike and a finished size of 174 mm long, 76 mm wide and 96 mm high. The combination of aerodynamic bodywork, exposed frame areas and visible mechanical detail gives the model a strong display presence from every angle. The build centers on a realistic inline-4 engine and supercharger, with the cowls, engine and swingarm attached to the frame via screws. The upper cowl follows the H2 road bike specification and is joined by side cowls and rear cowls that shape the machine's distinctive profile. Metal-plated parts are used for the muffler, light cases and other selected details, while clear parts define the headlight and taillight sections. A metal transfer recreates the Kawasaki river mark logo, and masking stickers are included to support clean paint separation on the fuel tank. Assembly kit contents are included. Cement and paints are required separately. On the workbench, the mix of plated finishes, clear lenses and treaded synthetic rubber tires creates varied stages across painting, detailing and final assembly. Once completed, the model suits shelf display, cabinet presentation or a place alongside other 1:12 motorcycle replicas where the supercharged layout and sharp cowl lines stand out clearly.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-12R, motorcycle model kit

€42.99

This 1:12 motorcycle model kit recreates the 1999 Kawasaki Ninja ZX-12R with the long, low stance and aerodynamic bodywork that made the original machine stand out among high-speed sportbikes. At 173 mm long, 70 mm wide and 101 mm high, the finished build has a substantial presence while keeping the proportions of the full-size bike clear from nose fairing to tail section. The kit focuses on the ZX-12R's technical character with an authentic monocoque frame, a detailed 4-cylinder engine and suspension parts that give the model real mechanical depth. Semi-transparent green fairing pieces reproduce the distinctive cowling and side wings, and their screw-mounted attachment allows the exterior panels to be removed after assembly to expose the structure beneath. Chrome plated muffler parts add contrast against the bodywork, while solid rubber tires with tread pattern bring a more convincing road-bike finish than hard molded alternatives. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. On a shelf, desk or in a display case, the model presents the ZX-12R as a landmark superbike from the era of 300 km/h performance machines. During the build, the combination of engine, frame, fairing and exhaust sections creates a focused project with clear mechanical variety from step to step.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Street Kit

€56.99

This 1:12 assembly kit captures the Kawasaki ZZR 1400 Ninja/ZX-14 with the long, low proportions and tightly wrapped fairing lines that made the full-size machine stand out in the hyper sport class. Tiny precision screws secure the cowlings, engine and seat rail, so the finished motorcycle shows crisp separation between the major sections when placed on the included display stand. The build also adds version-specific detail through the under diffuser and tandem cowling, allowing the U.S. specification to be reproduced. Metal-transfer markings are supplied for the Kawasaki, ZZR 1400 and ZX-14 logos, and separate metal-transfer details depict the mirror surfaces with a cleaner reflective finish than printed parts alone. Slide markings are prepared for the number plate and instrument panel, giving the cockpit and rear section finer visual definition. Assembly is required, with a stated build time of 600 minutes. Once completed, the model suits shelf display, desk presentation or a place in a motorcycle collection where the aerodynamic nose, stepped seat and road-going silhouette can be viewed from multiple angles. The 1:12 scale also gives enough presence for the markings, body contours and tyre treatment to read clearly without demanding a large display footprint.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX-RR 2020 Front Fork Detail Set

€36.49

This 1:12 front fork detail set for the Suzuki GSX-RR 2020 adds sharper mechanical definition to one of the most visible areas of the motorcycle model. Dedicated components reproduce the fork structure with separate outer tube top, outer tube, outer tube end and inner tube parts, while carbon fiber pattern decals add the surface look used on the race machine. The set also extends beyond the fork itself with photo-etched mesh parts for the radiator, muffler ends and seat cowl ducts. These thin metal inserts are shaped and fitted to match the surrounding parts, giving the radiator guards and outlet covers a finer appearance than molded surfaces alone. Small reservoir tanks and drain bolt details are fitted to the fork bottoms, and the instructions specify left and right placement for these parts. Metal surfaces are paired with anodized-finish outer tubes and reservoir tank parts, while the yellow pre-painted coil spring adds a strong visual accent in the suspension area. Built for use with Item 14139, the set suits modelers who want to refine the GSX-RR 2020 with more visible race-bike detail. During assembly, the fork parts are inserted in sequence, the outer tube end hole is oriented outward, and the surrounding mounting parts are glued around the fork rather than to it, preserving the intended fit of the completed section.

Model motorcycle kits 1:12

1:12 Suzuki GSX1100 Katana, plastic model kit

€28.49

This 1:12 plastic assembly model kit captures the Suzuki GSX1100S Katana Cust.Tuned with the sharp fairing lines, stepped seat profile and tuned street-bike stance that made the original machine stand out at its 1980 Cologne Motor Show debut. The finished motorcycle presents a focused display piece with exposed mechanical areas and a customized finish that gives the Katana its unmistakable period identity. The build is shaped around a detailed motorcycle layout in which the air-cooled 4-cylinder DOHC engine remains a visual centerpiece rather than disappearing behind bodywork. Cooling fins are reproduced with crisp definition, and the lower section gains extra depth through separate engine parts that frame the front mounted oil cooler and the exhaust layout. The tuned specification also extends to the braking hardware, where the front end uses a large diameter rotor with 4-pod calipers while the rear carries small diameter floating calipers. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, desk or display cabinet, the 1:12 scale gives the motorcycle enough presence for the engine, brakes and body contours to read clearly from side and three-quarter views. The subject suits model builders who enjoy classic motorcycle forms, visible mechanical detail and a machine whose customized specification is part of the finished look.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1300R Hayabusa, motorcycle model kit

€42.99

This 1:12 motorcycle model kit recreates the Suzuki GSX1300R Hayabusa Street '98 with the long, low silhouette and distinctive front fairing that made the original machine stand out at its debut. At 178 mm long and 71 mm wide, the finished build has a compact display footprint while still leaving room for the body shape, engine layout and road-bike proportions to read clearly. The kit is designed to reproduce the Hayabusa from its unique exterior form down to the engine, with the upper cowling and fuel tank molded as one piece for a clean body contour. The full-size motorcycle's vertically positioned twin-headlight cowling and ram-air-focused shape give the model its unmistakable front view, while the build also brings in details such as the swing arm, front fork and road-going tire setup. Metallic stickers are used on the front fork to sharpen the finish in that area, and the tires are made from real rubber for a more lifelike contrast against the hard kit parts. Assembly is required, with an indicated build time of 600 minutes. On a workbench, in a hobby room or as part of a motorcycle model collection, the Hayabusa shape holds attention from every angle, from the pointed nose to the stretched tail section. The finished model suits display beside other 1:12 motorcycles and gives builders a detailed road-bike subject with recognizable late-1990s Suzuki styling.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Team Suzuki ECSTAR GSX-RR 2020, assembly kit

€55.99

This 1:12 assembly kit recreates the Team Suzuki ECSTAR GSX-RR 2020 as a racing motorcycle model with a finished length of 178 mm. Engine, frame, fairing and exhaust system are all part of the build, giving the machine its layered MotoGP structure and a strong mechanical presence on the workbench. The separate body and chassis sections support a methodical build where the inline racing form takes shape step by step. Slick tires match the circuit specification of the full-size bike and sharpen the finished track look. A racing motorcycle stand is included for display, adding the paddock setting seen around competition machines between sessions. Decals supply the sponsor markings and livery details that turn the assembled model into a faithful 2020 team replica. Assembly is required, with a stated build time of 600 minutes. Paints are required separately. On a shelf, desk or in a display case, the completed motorcycle brings together fairing lines, race graphics and exposed mechanical areas in a format made for close viewing. The kit also suits focused bench sessions where trimming, painting and decal placement are part of the appeal of scale motorcycle building.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 Road Star 1999, motorcycle kit

€43.49

This 1:12 Yamaha XV1600 Road Star 1999 motorcycle kit recreates the long, low proportions of Yamaha's large-capacity cruiser in a format that brings mechanical detail to the workbench and a strong road-bike silhouette to the display shelf. At 208 mm long, 89 mm wide and 100 mm high when completed, the model has enough presence to show off the stretched chassis layout, broad fenders and the visual weight of the V-twin engine. The full-size machine combined traditional cruiser styling with a 1,600 cc air-cooled V-twin pushrod engine, telescopic front forks and a swinging arm monocross rear suspension, and those defining elements shape the character of this replica. Tamiya uses real screws in the assembly, a fitting choice for a motorcycle subject with exposed mechanical structure. Two kinds of metal plated parts support the chrome-rich finish, while the delicate cooling fins, spoke wheels and fine brake and clutch lines add sharper scale definition. The kit also contains 2 tank emblem versions, covering Road Star and the European Wild Star name, along with decals for stripes and meter details. Assembly kit contents are included. Paints, cement and tools are required separately. On the bench, the mix of plated surfaces, decals and fine line details supports a careful finishing process. Once completed, the transparent display stand presents the motorcycle cleanly in a side-on view that suits the cruiser profile and keeps the focus on the engine, wheels and tank graphics.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 RoadStar Custom, model kit

€48.99

This 1:12 scale assembly kit recreates the Yamaha XV1600 RoadStar Custom as a long, low cruiser with the visual weight and custom character of the full-size machine. At 208 mm long, 89 mm wide and 120 mm high, the finished motorcycle carries the stretched stance, tall windshield and touring-style add-ons into a display format with strong shelf presence. The model centers on the air-cooled 1,600 cc V-twin, with delicate cooling fins that give the engine area a finely layered look once assembled. Spoke wheels, slender brake lines and clutch lines add further mechanical detail, while metal-plated parts and clear parts help separate chrome surfaces, lamps and screen elements with convincing contrast. The kit depicts a customized version rather than the standard Road Star, using dedicated parts for details such as the studded seat, tandem pillion pad, back rest and side bags. Assembly time is stated as 600 minutes. Paints and cement are required separately. On the bench, the masking stickers help define painted sections cleanly, and the 2 decal schemes allow the finished motorcycle to be completed in green and black or purple. Once built, the model suits a display shelf, desk or cabinet where the low-slung lines, broad cruiser proportions and custom accessories can be viewed clearly from the side.

Model motorcycle kits 1:12

1:12 Yamaha YZF-R1, motorcycle model kit

€33.99

This 1:12 motorcycle model kit captures the Yamaha YZF-R1 with the compact, aggressive form that made the 1997 machine stand out at its debut. Full fairings, a stepped seat, side mirrors, twin headlight area and the distinctive supersport silhouette come together in a display build that keeps the bike's road-focused character clear from every angle. The assembly breaks the machine into recognizable mechanical sections, including the engine, frame, radiator, front fork, front wheel and steering controls. A display stand is part of the kit, and the engine build uses cut vinyl tubing to represent hose runs with measured sections such as 27 mm and 14 mm. Further tubing lengths of 15 mm, 39 mm, 41 mm and 45 mm appear through the frame and handlebar area, giving the finished model a more convincing technical layout. The front tire is assembled with a marked rotation direction, and the upper cowl, headlights and mirrors complete the bike's sharply defined front end. Assembly time is stated as 600 minutes. The finished motorcycle suits shelf display, hobby work sessions and careful paint finishing. Assembly kit contents are included, while paints, cement and tools are required separately. With 4 decal sets for debut and 1999 versions, the build supports different Yamaha YZF-R1 looks while keeping the same 1:12 scale presence.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S Front Fork Set

€30.99

This 1:12 Front Fork Set is made for the Ducati 1199 Panigale S model and replaces standard fork parts with a more intricate assembly that sharpens the look of the motorcycle's front end. Gold anodized aluminum outer tubes, paired with aluminum, brass and resin components, give the fork area a convincing metallic finish and more authentic contrast between the individual sections. The set contains 10 separate part types, covering inner tubes, outer tubes, connectors and end caps for a more faithful fork build. That parts mix adds visible depth around the upper fork, lower fork and adjoining hardware, where small differences in shape and finish make a clear impact on a 1:12 scale motorcycle. Assembly is required, with a stated assembly time of 600 minutes. The included assembly kit format suits model builders who want to refine suspension detail beyond the standard specification. On a finished Ducati 1199 Panigale S display, the front fork sits beside the brake discs, wheel and cockpit, so the metallic surfaces remain highly visible from multiple angles. During a careful bench build, the separate metal and resin elements support precise painting, fitting and finishing work in one of the most technical areas of the motorcycle model.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-RR #55 2006, model kit

soon available again

The 1:12 Kawasaki Ninja ZX-RR #55 2006 model kit captures Kawasaki's 2006 MotoGP machine with the sharp fairing lines, compact race stance and mechanical detail that define a modern factory racing motorcycle. Detachable cowlings fixed with precision-made screws let the finished build switch between a clean outer profile and an exposed technical view, so the internal layout remains part of the display rather than hidden once assembly is complete. This assembly kit recreates a 990cc-era race bike that reached the podium in the 2006 season, giving the subject real motorsport context alongside its detailed parts breakdown. The left and right engine areas show off drivetrain and exhaust detail, while the rear suspension uses a realistic nut fastener for a more authentic mechanical look. Synthetic rubber racing slick tires add the low-profile competition finish expected from a MotoGP machine, and Bridgestone sidewall markings sharpen that track-focused appearance. Cartograf decals provide the sponsor graphics, and the markings sheet allows the build to be finished as Shinya Nakano's No.56 or Randy de Puniet's No.17 machine. Across a workbench session, the model offers long-form building with an assembly time of 600 minutes and a result that rewards careful painting and decal placement. On a shelf, in a display case or beside other 1:12 motorcycles, the removable bodywork and race livery give the finished bike two distinct presentation styles.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha RZV500R, scale model kit

soon available again

The 1:12 Yamaha RZV500R centers on a well-known motorcycle subject in a scale model kit format that turns the machine's road-bike character into a focused bench project. In 1:12 scale, the finished replica is sized for shelf display, close inspection and hobby spaces where body lines and overall proportions matter. This release is identified specifically as the Yamaha RZV500R, giving the build a clear real-vehicle reference rather than a generic bike theme. The scale model kit format places the emphasis on staged construction, with the appeal coming from assembling a miniature motorcycle replica step by step. The 1:12 scale is a familiar format for bike modeling, balancing display presence with a manageable footprint on a desk, cabinet or work area. With the subject name and scale both clearly defined, the kit suits collectors who organize displays by vehicle type as well as builders who prefer recognizable road machines. On the workbench, the compact scale supports careful handling during assembly and makes the finished motorcycle easy to place alongside other vehicle replicas. Once completed, the Yamaha RZV500R works as a display piece for hobby rooms, shelves or glass cabinets where a dedicated motorcycle subject adds a distinct shape to the lineup.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZR-M1 '05 Front Fork

only available from customer service