RC Models

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3 R (992)

€169.99

Tamiya is proud to announce the release of the Porsche 911 GT3 R (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. Based upon the Porsche 911 GT3 (released as our 1/10 R/C kits – Items 58712 and 47496), in July 2022, the Porsche 911 GT3 R (992) was announced as a car which was developed to conform to GT3 regulations. With a horizontally opposed 6-cylinder engine capable of 565ps, this car features lightweight body (only about 1,250kg) with carbon fiber, and flourished at global races such as NLS (Nürburgring Langstrecken Serie) 2024 and 2024 Fanatec GT World Challenge Asia Powered by AWS. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Super Clod Buster Black Edition

€344.99

Article number: 300047432 Product: 1:10 RC Super Clod Buster Black Edition • This is a 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The stylish monster truck body is injection molded in black plastic, with great detail and realism. Metalplated parts are included to depict front grille, supercharger air intakes and roll bars. • Plastic bumper and damper components are red, giving a colorful accent. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that realize ground clearance of 55mm and a superb off-road drive. • Four-wheel steering ensures that the model has excellent handling. • Two Type 540 motors and the dedicated twin motor TEU106BK ESC give ample power via front and rear differential gears. • Stickers are a brand new design for this model. 4WD Monstertruck, assembly Kit, 2 motors, 4-Wheel steering, ABS Body (black), incl. ESC, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi V8 1992 Touringcar (TT-02)

€159.99

Article number: 300058699 Product: 1:10 RC Audi V8 1992 Tourenwagen (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Warning notices! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Citroen 2CV Charleston (M-05)

€144.99

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

RC buggys (2WD/4WD)

1:10 RC The Grasshopper i 2005 2WD Re.Re

€119.99

Article number: 300058346 Product: 1/10 RC The Grasshopper i 2005 2WD Re.Re Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 380 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Honda Bundle

Product bundle consisting of: 1:10 RC Honda NSX Racing Whi PB TT-02 / Tuning set TT-02 / 1:10 wheel set 14 Sp.Design (4) black Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.   Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set short (4), Ball bearing set (16)   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1991 Audi V8 Touring (TT-02)

€154.99

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Monte-Carlo 99 (TT-02)

€164.99

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC McLaren Senna TT-02

€159.99

Article number: 300058711 Product: 1:10 RC McLaren Senna TT-02 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the McLaren Senna which has already been released as Item 24355 in the 1/24 Sports Car series!   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

€234.99

Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Nissan Skyline GT-R R33 (TT-02D)

€194.99

Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D) Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes. About the Model • This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Plasma Edge II TT-02B 4WD

€149.99

Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3 (992) TT-02

€159.99

Article number: 300058712 Product: 1:10 RC Porsche 911 GT3 (992) TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC T/GR Yaris Rally1 Hybrid TT-02

€159.99

Article number: 300058716 Product: 1:10 RC T/GR Yaris Rally1 Hybrid TT-02 Here comes an additional 1/10 R/C model assembly kit based on our popular TT-02 chassis – this time, Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. To comply with the Rally1 restriction which started in 2022, manufacturers developed new cars compatible with hybrid system, and Toyota made the GR Yaris Rally1 Hybrid. The combination of hybrid unit integrated with motor and generator and engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Chassis First Try On-Road

€109.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Club Pai. MB-01

€174.99

Article number: 300047501 Product: 1:10 RC Alfa Rom. Giulia Club lack.MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.

Off-road RC cars

1:10 RC AQROSHOT (DT-03T)

€134.99

Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi 90 quattro Racing TT-02

€169.99

This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX) 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford GT Mk.II 2020 (TT-02) PB

€159.99

Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Ford Mustang GT4 (TT-02)

€154.99

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

Off-road RC cars

1:10 RC Golf MK2 GTI 16 Rally MF-01X

€184.99

Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02

€154.99

Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK-GT-R 1997 TC-01

€274.99

Article number: 300058731 Product: 1:10 RC MB CLK-GT-R 1997 TC-01 Tamiya is delighted to announce that the 1997 Mercedes-Benz CLK-GTR is now paired with the TC-01 chassis. (Item 47437 uses the TT-01 Type-E chassis.) The Mercedes-Benz CLK-GTR car took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, it was actually vastly different. It used a carbon composite monocoque frame with roll cage, a rear 6-liter V12 engine capable of over 600hp, and 6-speed sequential transmission. Its 4-wheel double wishbone suspension featured front and rear pull-rod setups. In the same year, this car took both Manufacturer’s and Driver’s Championships. 4WD assembly kit, TC-01 Chassis, Mercedes Benz CLK-GTR Boddy, 540 Motor, assembly guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC MB G-Class G500 (CC-02)

€294.99

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

On-road RC cars (2WD/4WD)

1:10 RC Monster Beetle (2015)

€234.99

Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure. Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Neo Fighter Buggy DT-03

€96.99

Article number: 300058587 Product: 1:10 RC Neo Fighter Buggy DT-03 The Neo Fighter Buggy is mounted on the easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€179.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche Carrera RSR 2.8 BT-01

€179.99

Article number: 300058740 Product: 1:10 RC Porsche Carrera RSR 2.8 BT-01 The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche Carrera RSR 2.8 La.BT-01

€199.99

The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. The Body is Pre-Painted in PS-1 White and PS-31 Smoke (Windows). 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polyacarbonate body prepainted, Manual.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Racing Fighter (DT-03) The Real

€104.99

Article number: 300058628 Product: 1:10 RC Racing Fighter (DT-03) The Real Say hello to the new model on Tamiya's easy-to-assemble, rough and tumble DT-03 buggy chassis! It features a brand new polycarbonate body design with attractive, boxy lines and a stylish rear wing. Customers outside of Japan will be delighted to hear that the export version of this kit exclusively features a torque-tuned motor and CVA oil dampers. About the Model • This is a 1/10 scale R/C model assembly kit. • Features a stylish new body molded in durable and lightweight polycarbonate. Brand new stickers are included to decorate the model. • The DT-03 uses a tough monocoque frame. Big wheelbase (288mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance off-road! • Front arms are at a 25-degree angle for great off-road driving. Dampers are high-performance CVA oil shocks. • A torque-tuned motor is included in the export version ONLY. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Lightweight kit with detailed and illustrated assembly instructions, motor, controller Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TA08 PRO Chassis Kit

€349.99

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC The Hornet 2004 2WD Buggy LWA

€134.99

Article number: 300058336 Product: 1:10 RC The Hornet 2004 2WD Buggy LWA About the model: - Length: 400mm, width: 230mm, height: 150mm. Weight: 874g - Solid bathtub frame with side bumpers - High performance Type 540 motor - Independent swing axle front suspension with friction dampers -Rolling rigid axle rear suspension with oil filled dampers - Sealed rear gearbox to protect diff gear during off-road running -Original 3-piece assembly wheels compatible with optional ball bearings (sold separately) - Straight ribbed racing front tires - Spiked buggy rear tires - Durable, shock absorbent polycarbonate body shell - Reinforced resin bumper - TEU-101BK Electronic Speed Controller

RC buggys (2WD/4WD)

1:10 RC Top Force 2017 4WD

€219.99

4WD Model kit, Vintage Model, Re-Release, Length: 400mm, Polycarbonate Body, C.V.A. Damper incl. ESC   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota LC 40 Yel Painted CC-02

€274.99

Article number: 300047490 Product: 1:10 RC Toyota LC 40 Yel Painted CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 40 as our new R/C model on the cross country CC-02 chassis. The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. The long-selling Land Cruiser 40 series was sold from 1960 to 1984, and employed front / rear rigid axles with leaf springs, and durable ladder frame. This R/C model assembly kit recreates the 1972 Land Cruiser FJ40V which is one of the most popular cars in that series. Pre-Painted Body. 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, pre-painted Polycarbonat Body, Type 540 Motor, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra (JZA80) BT-01 2WD

€154.99

Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.　(Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Type-SRX Chassis Kit

€339.99

Article number: 300058710 Product: 1:10 RC TT-02 Type-SRX Chassis Kit Tamiya is proud to welcome a new addition – TT-02 Type-SRX Chassis Kit - to the TT-02 Type-S Series which is popular among both beginners and race users. The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit are chosen (more cost-effective than buying each part) for users who want to learn setup before levelling up to middle class chassis. Included Hop-up Option Parts: Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) Included: 4WD assembly Kit, TT-02 Chassis, fully ball bearings, 540er Torque-Tuned Motor, Option parts, Shaft driven, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02R Chassis Kit

€199.99

Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Included: 4WD assembly Kit, TT-02 Chassis, R Version with Tuning Parts, fully ball bearings, blue anodized parts WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC XV-01 Lancia Delta HF Integrale

€284.99

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 RC Lunch Box Black Edition

€164.99

Article number: 300058546 Product: 1:12 RC Lunch Box Black Edition If you want to have cool wheelie fun, grab the TAMIYA Lunch Box Black Edition and do fat wheelies thanks to the wheelie bar. The original model appeared in 1987 as a monster that knows no bounds. The current reissue of TAMIYA in the Black Edition is equipped with a black colored ABS body and black rims. Chrome-plated components such as the radiator grille and bumper round off the look. 2-channel RC system with servo, 7.2 V battery pack & charger sold separately. Numerous optional tuning parts available. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 RC XR311 Combat Support Vehicle

€249.99

RC trucks

1:14 RC Scania 770 S 4x2

€489.99

Following Item 56368 (1/14 R/C Scania 770S 6x4) and Item 56371 (1/14 R/C Scania 770S 8x4/4), Tamiya welcomes the Scania 770 S 4x2 to 1/14 Tractor Truck Series. The Scania 770 S 4x2 is a single front steering, single rear-axle drive four-wheel heavy trailer head equipped with a 16.4-liter V8 turbo engine capable of 770hp, added in 2020 to the Swedish manufacturer Scania’s top-grade S Series. The 4x2 trailer heads are versatile, and are a very popular type of trucks in our line-up. This kit also has accessory parts to recreate a customized version like those which are trendy in Europe. Assembly Kit of Scania 770S, 1/14th scale, Aerodynamic Package, Driver Figure, Aluminium Frame, Manual included.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Scania 770S 6x4 Silver pre-pain.

€589.99

Article number: 300056373 Product: 1:14 RC Scania 770S 6x4 Silver pre-pain. Tamiya welcomes a new addition to 1/14 Tractor Truck Series – this time, the Scania 770 S 6x4 produced by the Swedish manufacturer Scania. The Scania 770 S 6x4 is one of the trailer heads in the Scania’s top-grade S Series – which had undergone a full model change in 2016. This trailer head features a double rear-axle drive 6x4 chassis equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp which was the most powerful in the industry as of 2020. SCANIA 770S 6x4 Model kit, ABS injection moulded body w/ Aero-pack, Aluminum Ladderframe, 2-axles (driven), 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotor Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC tanks

1:16 RC Leopard 2 A7V w/Option Kit

€1,149.99

The Leopard 2A7V is one of the most modern battle tanks in the world and is used in numerous countries. The V stands for "improved" or, more accurately in German "verbessert". The improvements compared to the previous version are considerable: Better visibility through the use of modern optics and camera systems. More firepower through the revision of the 120mm cannon. The communication system has been improved and the Battle Management System (BMS) is used. The chassis has also been reinforced with an additional protection module and additional armor on the front protects the tank better against armor-piercing ammunition. The original weighs an impressive 63.9 tons and is powered by a 1500 hp engine. TAMIYA has now made this tank into a remote-controlled version in 1/16 scale. Here, too, the electronics have been completely redeveloped and the model redesigned compared to its predecessor, the 56020 2A6. The result is a real highlight: Both in terms of detail and the functions, it sets standards in this area. All functions can be controlled via the DMD T-12, such as driving functions, turret rotation, light functions, sounds and also the combination of sound, movement and light when firing a cannon, for example. Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

Manta Ray (2018)

€149.99

4WD assembly kit, clear polycarbonate Body, ESC included, Type 540 Motor, user guide   Warning! Not suitable for children under 14 years.

RC trucks

Tamiya RC Volvo Bundle

Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen DS Blue PB MB-01

€174.99

Article number: 300047502 Product: 1:10 RC Citroen DS MB-01 Blau Lack. Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better known cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse (MB-01)

€164.99

Article number: 300058721 Product: 1:10 RC 1000 TCR Berlina Corse (MB-01) Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Spr. Club MB-01

€164.99

Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.

On-road RC cars (2WD/4WD)

1:10 RC au TOM'S GR Supra (TT-02)

€164.99

Article number: 300058703 Product: 1:10 RC au TOM'S GR Supra (TT-02) Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi Quattro A2 (TT-02)

€154.99

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Audi R8 LMS 2008 TT-02

€169.99

Tamiya welcomes another racing car – this time, the Audi R8 LMS 2008 – paired with our popular TT- 02 chassis. Based upon the Audi sportscar R8 and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-liter V10 midship engine capable of over 500hp was mounted in a lightweight aluminum space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC BBX 2WD Buggy BB-01

€339.99

Article number: 300058719 Product: 1:10 RC BBX 2WD Buggy BB-01 Tamiya is proud to announce a brand new 1/10 R/C 2WD off-road buggy model featuring the combination of classic design and modern performance. Its brand new chassis is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by the full-size UTVs. The new body is designed by famed Japanese artist Atsushi Arino. Included: 2WD assembly Kit, BB-01 Chassis, Polycarbonat body with driver, CVA oil dampers, oil filled diff, Monocoque chassis frame, ball bearings WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Buggy Sand Scorcher 2010 2WD

€394.99

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Citroen DS MB-01

€154.99

Article number: 300058734 Product: 1:10 RC Citroen DS MB-01 Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknown cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC ENEOS X PRIME GR Supra TT-02

€164.99

Article number: 300047514 Product: 1:10 RC ENEOS X Prime GR Supra TT-02 Here is another 1/10 R/C model assembly kit based on our popular TT-02 chassis. The ENEOS X PRIME GR Supra of ROOKIE Racing with a prominent orange color scheme is one of six GR Supra cars taking part in the Super GT series GT500 class in 2024. The carbon fiber body inspired by the GR Supra street car has aerodynamic devices – which differ for each manufacturer – at the front and rear and on door undersides. Its 2-liter 4-cylinder turbo engine is capable of 550hp and powers the rear wheels. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC F104 PRO II w/Body

€254.99

Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat 131 Abarth Olio Fiat MF-01X

€184.99

Article number: 300058723 Product: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Fiat Abarth 1000TCR MB-01 paint.

€169.99

Article number: 300047492 Product: 1:10 RC Fiat Abarth 1000TCR MB-01 Lack. Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The body is pre-painted.The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Escort Custom (TT-02)

€154.99

Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.