5 22

Sort by:

Top sellers
  • Top sellers
  • New
  • Price ascending
  • Price descending
Filter

Filter
Price
Category
Brand
Brands & licenses
Scale
1:12 RC Lunch Box Re-Release

RC off-road

1:12 RC Lunch Box Re-Release

€160.00

Article number: 300058347 Product: 1/12 RC Lunch Box Re-Release Another one of Tamiya's classic creations, the R/C Lunch Box (1st released, 1987) was loved for its camp appearance as much as for its R/C performance. The boxy minivan body raised up over monster truck wheels ensure that this R/C van will get attention anywhere you choose to drive it. Use the sides of the van as a canvas to paint your own original designs for the ultimate conversation piece! Lunch Box(2005) Alternativ: 300058546 1:12 RC Lunch Box Black Edition 300047402 1:10 RC Lunch Box Red Edition Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:12 RC X-SA Lunch Box

RC off-road

1:12 RC X-SA Lunch Box

€200.00

Article number: 300046701 Product: 1:12 RC X-SA Lunch Box The first classic Tamiya model to join the brand new X-SA series is the Lunch Box, favored basher of many an R/C fan and offering an all-around fun 2WD drive on those iconic bulging tires! About the Model • This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 225mm. Wheelbase: 207mm. • The classic Lunch Box body is molded in styrene plastic in the original yellow, with the now legendary markings already applied. • Yellow wheels are paired with 115mm tires for some serious off-road capacity. • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups. • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris. • Features a rear wheelie bar for wild wheels-in-the-air driving. • Requires separately sold R/C equipment, battery pack and charger.

More
1:14 ACU-01 TR/C Actuator Set Tipper Tr.

RC trucks

1:14 ACU-01 TR/C Actuator Set Tipper Tr.

€325.00

Article number: 300056545 Product: 1:14 ACU-01 TR/C Actuator Set Tipper Tr. This actuator set is designed to complement the Mercedes-Benz Arocs 3348 Dump Truck. When using a 4-channel transmitter, the dump feature of the trucks bed can be fully controlled. Set Contents • The ACU-01 Unit is a compact actuator unit for Tamiya R/C tipper/dump truck beds. • The included geared motor (gear ratio = 64:1, size = Type 280) raises and lowers the truck bed via command from the ACU-01 unit, from a transmitter or the manual included switch. • Limit switches ensure that the truck bed does not move beyond the defined range. • Recommended for use with Tamiya 4ch Attack 2.4Ghz radio. Item 7255252 • Note: This product cannot be used together with Motorized Support Legs (Item 56505), as it uses the same R/C channel. • This model can be used with standard ESCs, or the MFC-01 (Item 56511) and MFC-03 (Item 56523) multi- function control units. • Compatible with 1/14 scale R/C tipper/dump truck models.

More
1:14 Multi-function Control Unit MFC-01

RC trucks

1:14 Multi-function Control Unit MFC-01

€370.00

Article number: 300056511 Product: 1/14 Multi-function Control Unit MFC-01 About the Tractor Truck Multi-Function Control Unit Tamiya presents incredible sound and action options for any 1/14 scale R/C Tractor Truck with the all R/C Tractor Truck Multi-Function Control Unit. This system, when mounted on the truck is located inside the cabin with speaker to the front and the MFC-01 unit to the rear. The control unit is mounted inside the left tool box for easy access.

More
1:14 RC 3-Axle-ReeferSemi Trailer Kit

RC trucks

1:14 RC 3-Axle-ReeferSemi Trailer Kit

€475.00

Article number: 300156319 Product: 1/14 RC 3-Axle-ReeferSemi Trailer Kit Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products.   Warning! Not suitable for children under 14 years.

More
1:14 RC 40ft.Container Semi-Trail.Maersk

RC trucks

1:14 RC 40ft.Container Semi-Trail.Maersk

€495.00

Article number: 300056326 Product: 1/14 RC 40ft.Container Semi-Trailer Maersk Cargo containers are used for shipping products and raw materials all around the world and ISO. This is a replica of a 40ft. regular height container which can be connected to any Tamiya's 1/14 scale Tractor Trucks.     Warning! Not suitable for children under 14 years.

More
1:14 RC Arocs 3363 (Light Gun Metal)

RC trucks

1:14 RC Arocs 3363 (Light Gun Metal)

€460.00

Article number: 300056359 Product: 1:14 RC Arocs 3363 (Light Gun Metal) This is a special edition of the R/C Mercedes Benz Arocs (Item 56352), the super-stylish 3-axle truck with distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as the cab, H, K, and M parts of the kit are pre-painted in Light Gun Metal (Tamiya Color TS-42), and given a urethane coating for a beautiful finish, and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 529mm, width: 190mm, height: 267mm. The narrow body of the ClassicSpace variant Arocs 3363 is recreated accurately, complete with the distinctive "buckettooth" grille and headlight guards. Cab, H, K, and M parts are molded in gray, pre-painted in Light Gun Metal (TS-42), with a urethane top coat for a stunning finish. Photo- etched parts recreate cab rear platform. • Interior features such as seat and dashboard are depicted. • 3-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf spring dampers and friction dampers. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with tractor truck option parts (TROP) such as Items 56531, 56532, 56536 and 56538. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

More
1:14 RC Buggyra Fat Fox (TT-01E)

RC on-road

1:14 RC Buggyra Fat Fox (TT-01E)

€165.00

Article number: 300058661 Product: 1:14 RC Buggyra Fat Fox (TT-01E) Here comes a new addition to the stable of racing trucks in the world of Tamiya R/C! This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. You’ll be able to have exciting truck races with your friends, just like the real ones thrilling fans on major circuits around Europe this summer! About the Model • This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm. • The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape. • Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper. • Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko. • Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.

More
1:14 RC EUTruck ScaniaR620 6x4 Highl Kit

RC trucks

1:14 RC EUTruck ScaniaR620 6x4 Highl Kit

€465.00

Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kit Trucks are essential components of Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kitmany logistics networks around the world. One such truck which can be seen on the roads carrying large loads is the biggest and most powerful Scania truck, the R620. Tamiya is proud to add this wonderful piece of machinery the R620 6x4 to the 1/14 scale R/C Tractor Truck lineup. This massive tractor truck features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:14 RC Grand Hauler Customized

RC trucks

1:14 RC Grand Hauler Customized

€460.00

Article number: 300056344 Product: 1/14 R/C Grand Hauler Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm. • The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing. • Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Newly-designed 1/14 scale driver figure included. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds.   Warning! Not suitable for children under 14 years.

More
1:14 RC King Hauler Black Edition

RC trucks

1:14 RC King Hauler Black Edition

€470.00

Article number: 300056336 Product: 1/14 RC King Hauler Black Edition This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor. Tamiya's Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya's Tractor Trucks may be connected to separately-sold semi-trailers.     Warning! Not suitable for children under 14 years.

More
1:14 RC King Hauler Kit

RC trucks

1:14 RC King Hauler Kit

€460.00

Article number: 300156301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads. RC Truck King Hauler   Warning! Not suitable for children under 14 years.

More
1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

RC trucks

1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle

€475.00

Article number: 300056325 Product: 1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly.   Warning! Not suitable for children under 14 years.

More
1:14 RC MB Actros 3363 (Pearl Blue)

RC trucks

1:14 RC MB Actros 3363 (Pearl Blue)

€535.00

Article number: 300056354 Product: 1:14 RC MB Actros 3363 (Pearl Blue) This is a special edition of the Mercedes-Benz Actros 3363. It features pre-painted Body parts in Pearl Blue (Tamiya Color TS-89) for a cool look, with a durable coating applied to protect the paintwork from damage. About the Mercedes-Benz Actros 3363 6x4 GigaSpace This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons! The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter. The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!

More
1:14 RC MB Actros 3363 GigaSpace 6x4

RC trucks

1:14 RC MB Actros 3363 GigaSpace 6x4

€510.00

Article number: 300056348 Product: 1:14 RC MB Actros 3363 GigaSpace 6x4 This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons! The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter. The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!

More
1:14 RC MB Arocs 3348 Tipper Red/Silver

RC trucks

1:14 RC MB Arocs 3348 Tipper Red/Silver

€645.00

Article number: 300056361 Product: 1:14 RC MB Arocs 3348 Tipper Red/Silver This is a special edition of the R/C Mercedes Benz Arocs tipper truck (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as parts come pre-painted in TS-8 Italian red (cab, H, K, and M parts) and TS-17 Gloss aluminum (rear bed and CC parts), and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 576mm, Width: 190mm, height: 267mm. • The Arocs 3348 form is recreated by an injection molded body, with separate side mirrors and visor, etc. • Cab, H, K, and M parts are molded in red PS and pre-painted in Italian red (TS-8), while bed and CC parts are molded in gray ABS and pre-painted in Gloss aluminum (TS-17). All have a urethane top coat. • The 3-axle chassis has a tough ladder frame with aluminum side channels and resin cross members. • Truck bed section is comprised of metal subframe and resin panel sections for superb durability. • Compatible with Electric Actuator Set (Item 56545) for realistic truck bed motion. • TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the bed. • Rear tires, rear fenders and taillights have dedicated tipper truck model designs. • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Compatible with MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

More
1:14 RC MB Arocs 3348 Tipper Truck

RC trucks

1:14 RC MB Arocs 3348 Tipper Truck

€600.00

Article number: 300156357 Product:1:14 RC MB Arocs 3348 Tipper Truck Tip-Top! The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the dual rear axle-driven Arocs 3348 6x4 tipper truck, which runs on a 12.8-liter turbocharged inline-6 engine capable of 480hp. The highly detailed body breathtakingly captures the slimline form of the truck cab, including the distinctive bucket tooth design grille. Depictions of headlight guards, front bumper and skid plate underneath are parts of a truly realistic finish. The assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. The ladder frame chassis features aluminum side channels with resin cross members. A realistic 1-piece resin bed is reinforced with a metal frame. Power from the front-mounted motor is delivered to rear axles via propeller shaft; a built-in differential gear on each axle enables smooth cornering. Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.

More
1:14 RC MB Arocs 3363 6x4 ClassicSpace

RC trucks

1:14 RC MB Arocs 3363 6x4 ClassicSpace

€440.00

Article number: 300056352 Product: 1:14 RC MB Arocs 3363 6x4 ClassicSpace This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons. The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter.

More
1:14 RC Mercedes B. Actros1851 GigaSpace

RC trucks

1:14 RC Mercedes B. Actros1851 GigaSpace

€445.00

Article number: 300056335 Product: 1/14 RC Mercedes Benz Actros 1851 GigaSpace The 2012 Truck of the Year award-winning Actros series is the flagship of the worlds leading truck manufacturer, Daimler. Its latest installment, the rear-wheel drive Actros 1851 GigaSpace runs on a 12.8-liter 6-cylinder turbo-charged engine generating 510hp and is used for long-distance haulage, heavy duty distribution haulage, construction haulage and so on. The Tamiya 1/14 scale R/C kit faithfully captures all the detail of the full size rig using ABS plastic for the body parts and a 3-speed, shift on the fly working transmission.     Warning! Not suitable for children under 14 years.

More
1:14 RC Mercedes-Benz 1838 LS Kit

RC trucks

1:14 RC Mercedes-Benz 1838 LS Kit

€370.00

Article number: 300156305 Product: 1/14 RC Ger. Truck Merc.Benz 1838 LS Kit The 1838LS tractor truck combines a massive aerodynamic silhouette with a powerful 380 horsepower, 12,763cc V8 cylinder turbo diesel engine. Tamiya's R/C model of the 1838LS truck realistically captures the looks of the full size truck.   Warning! Not suitable for children under 14 years.

More
1:14 RC Pole-Trailer Kit w/Tubes

RC trucks

1:14 RC Pole-Trailer Kit w/Tubes

€275.00

Article number: 300156310 Product: 1/14 RC Pole-Trailer Kit w/Tubes The Pole-Trailer is able to carry pipes of various lenghts due to its collapsible pole. The trailer also features an aluminum chassis and 4 highly detailed wheels. 5 plastic pipes of 55mm in diameter and 75cm in length are included.   Warning! Not suitable for children under 14 years.

More
1:14 RC Reinert Racing MAN TGS TT-01E

RC on-road

1:14 RC Reinert Racing MAN TGS TT-01E

€170.00

Article number: 300058642 Product: 1:14 RC Reinert Racing MAN TGS TT-01E Following on from the success of the groundbreaking Team Hahn Racing MAN TGS model (Item 58632) last year, Tamiya announces the release of a new racing truck product on the TT-01 Type-E chassis. It recreates the #77 truck run by Team Reinert Racing in the 2016 running of the FIA European Truck Racing Championship. About the Model • This is a 1/14 scale R/C model assembly kit. • The form of the MAN TGS racing variant is captured accurately by a 4-piece durable and lightweight polycarbonate body. It includes depictions of details such as engine, turbocharger and frame. • Separately molded parts recreate side mirror, coupler and rear bumper. • Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck for the 2016 season. • Wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts to make the model compatible with LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.

More
1:14 RC Scania R470 Silver Edition

RC trucks

1:14 RC Scania R470 Silver Edition

€440.00

Article number: 300056364 Product: 1:14 RC Scania R470 Silver Edition This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm. • The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish. • Interior features such as seat and dashboard are depicted. • 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

More
1:14 RC Team Hahn MAN TGS (TT-01E)

RC on-road

1:14 RC Team Hahn MAN TGS (TT-01E)

€170.00

Article number: 300058632 Product: 1:14 RC Team Hahn MAN TGS (TT-01E) Weighing in at a colossal 5,400kg, the trucks in the European Truck Racing Championship are truly the heavyweights of motorsport. But size isn’t the only thing that’s extreme about these incredible machines. The Team Hahn Racing MAN TGS truck is powered by a huge 1,100hp turbocharged diesel engine. To get that phenomenal power from the engine to the tarmac is no easy task, which is why the truck takes advantage of a Mechanical 16-speed ZF gearbox to get it up to speed. In 2015, driver Joachim Hahn piloted the truck to a creditable 3rd position in the Championship. The Tamiya radio control replica faithfully captures the giant race truck. The polycarbonate body sits atop the TT-01 E chassis, which is designed for easy assembly and maintenance. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:14 RC Truck Ford Aeromax Kit

RC trucks

1:14 RC Truck Ford Aeromax Kit

€430.00

Article number: 300056309 Product: 1/14 RC Truck Ford Aeromax Kit The massive American rig has joined Tamiya's 1/14 scale tractor truck stable. Tamiya's model of the Ford Aeromax tractor truck boasts both large scale realism and authentic functions. Servo-shifted 3-speed transmission is mounted at the front of the aluminum ladder frame.     Warning! Not suitable for children under 14 years.

More
1:14 RC US Fuel Tank Trailer 2Axle Galat

RC trucks

1:14 RC US Fuel Tank Trailer 2Axle Galat

€435.00

Article number: 300056333 Product: 1/14 US Fuel Tank Trailer 2Axle "Gallant Eagle" The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303.   Warning! Not suitable for children under 14 years.

More
1:14 RC US Semi-Trailer Kit

RC trucks

1:14 RC US Semi-Trailer Kit

€360.00

Article number: 300156302 Product: 1/14 RC US Semi-Trailer Kit This Box Trailer can be hitched-up to a 1/14 scale R/C tractor truck. This trailer uses hard-anodized aluminum panels for the utmost durability and realism. Rear gate doors are open-able, just as seen on full-sized trailers. Semi-Trailer for T.Truck   Warning! Not suitable for children under 14 years.

More
1:14 RC Volvo FH16 Tow Truck 8x4

RC trucks

1:14 RC Volvo FH16 Tow Truck 8x4

€1,025.00

Article number: 300056362 Product: 1:14 RC Volvo FH16 Tow Truck 8x4 Our series of ultra-realistic 1/14 scale R/C trucks is a byword for fun, and offers a wide variety of different models and truck types. Now, it is to expand with another brand new type – the tow truck, which makes its living towing heavy duty vehicles such as tractor trucks. It promises a completely different element of enjoyment to predecessors in the series. The FH16 is marketed by Volvo, a renowned actor in the global commercial vehicle market. The FH Series includes a 750hp 16.1-liter turbocharged inline-6 engine FH16 Globetrotter 750 8x4 tow truck. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 750mm, width: 195mm, height: 300mm. • Features a detailed molded plastic depiction of the cab, with photo-etched front grille and interior features. • This model’s front axles feature the first twin steering system seen in the Tamiya 1/14 Truck series. • The rear boom and underlift mechanism features plenty of metal components for excellent durability. Employ the new separately sold Actuator Set (Item 56553) to control them via R/C transmitter. • Ladder frame has aluminum side channels and resin cross members. Power from the front motor is delivered to the two rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering. • Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles. • Three-speed transmission allows shifting via transmitter (only one gear is usable when towing). • Headlights and taillights can be lit up with separately sold LEDs, and the model is compatible with Item 56523 Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03). • Compatible TROP truck option parts: 56523, 56531, 56538, 56548, 56549, 56550, 56551, 56553. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:18 RC Konghead 6x6 (G6-01)

RC off-road

1:18 RC Konghead 6x6 (G6-01)

€225.00

Article number: 300058646 Product: 1:18 RC Konghead 6x6 (G6-01) Take a look at Tamiya's first ever big-wheeled 6WD model - the Konghead 6x6! This model utilizes a new geardriven 6WD chassis which used the GF-01 as a starting point. The excellent drive it provides will make for supremely fun off-road driving. About the Model • This is an R/C model assembly kit. Length: 420mm, width: 270mm, height: 280mm. • The 6WD chassis employs 3 differential gears to transmit power from the front-center-mounted motor to all of the model's wheels. These differentials are encased in the durable monocoque. • 6-wheel independent double-wishbone suspension is paired with friction dampers. • The brand new polycarbonate body was inspired by the classic Bullhead, and indeed its metal-plated injection molded air cleaner and muffler depictions are the same as those used on the Bullhead. • The kit manual build creates a front wheel-steering model. It also includes instructions to re-assemble it into a 4WS model with steerable rear wheels. Separately-sold 4WS function transmitter and R/C equipment are required. • The model is compatible with many GF-01 chassis Hop Up Option and spare parts. • The Bullhead-inspired body features a brand new sticker sheet with brash, colorful logos created just for this model. A host of metal-plated parts includes air cleaners and exhaust (both from the Bullhead), plus chrome-plated deep rim wheels. • Its powerful gear-driven setup allows the Konghead to take on slopes of up to 40 degrees - the perfect outdoor drive!

More
1:24 RC Star Unit Lunch Box Mini SW-01

RC on-road

1:24 RC Star Unit Lunch Box Mini SW-01

€92.99

Article number: 300057409 Product: 1:24 RC Star Unit Lunch Box Mini SW-01

More
FH16 Timber Truck

RC trucks

FH16 Timber Truck

€645.00

Article number: 300056360 Product: FH16 Timber Truck The stable of Tamiya 1/14 scale R/C trucks welcomes a new type in this assembly kit model of a timber truck with long rear bed featuring distinctive frame and stakes for carrying logs. The model depicts the Volvo FH16 Globetrotter, a 750hp 16.1-liter turbocharged engine powered truck from the Swedish company’s flagship FH Series that underwent a full model change in 2012. About the Model • This is a 1/14 scale R/C tractor truck model assembly kit. Length: 733mm, width: 194mm, height: 306mm. • The highly accurate body captures the FH16 Globetrotter form, with stainless steel photo-etched front grille, and cab interior details. • Depictions of stakes (these are fixed to the model for safety purposes) and cab rear headboard use a durable combination of resin and metal. • Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. • Ladder frame features aluminum side channels with resin cross members. • Power from the front-mounted motor is delivered to rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering. • Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles. • TR Mighty Tuned motor (35T) provides plenty of power, even when driving with loads. • Printable templates for the creation of paper craft logs (for display only, not recommended for use when the model is driven) will be provided to agents, and available for download from www.tamiya.com. • LED cables in Multi-Function Control (MFC) units are not compatible with this model. Customers will need to purchase separately available longer-cabled LEDs (Items 56549-56551) if using MFCs. • Compatible option parts (TROP) include Items 56523, 56531, 56532, 56538 and 56548.   Warning! Not suitable for children under 14 years.

More
1:10 RC Blackfoot (2016)

RC off-road

1:10 RC Blackfoot (2016)

currently not in stock out of stock

Article number: 300058633 Product: 1:10 RC Blackfoot (2016) Tamiya announces this modern successor to the Blackfoot line of cars. It features the classic body from the Blackfoot III (Item 58498) mounted on the chassis used in the Monster Beetle (2015) model (Item 58618), an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 440mm, width: 290mm, height: 270mm. • The ABS resin Blackfoot III body is given newly designed markings that carry on the theme of the original series of models. A resin driver figure is also included. • The rugged ABS space frame chassis utilizes double-wishbone front and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts come with rubber boots to protect from dust. • A resin undercover protects the sealed gearbox at the rear of the model. • 123mm semi-pneumatic lug pattern tires are paired with yellow 1-piece wheels. Safety note: Not for children under 14 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. CARSON reserves the rights to change, update or replace any component at any time.

More
1:10 RC Blitzer Beetle 2WD (2011)

RC off-road

1:10 RC Blitzer Beetle 2WD (2011)

currently not in stock out of stock

More
1:10 RC Citroen 2CV Charleston (M-05)

RC on-road

1:10 RC Citroen 2CV Charleston (M-05)

currently not in stock out of stock

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

More
1:10 RC Formula E Gen2 ChLivery TC01

RC on-road

1:10 RC Formula E Gen2 ChLivery TC01

currently not in stock out of stock

Article number: 300058681 Product: 1:10 RC Formula E Gen2 ChLivery TC01 • This is a 1/10 scale R/C racing chassis kit. Length: 370mm, width: 187mm, wheelbase: 257mm. • Adjustable suspension mounts and plastic bushings allow fine tuning of roll center, toe and skid angle settings. • High performance Super Short Big Bore Dampers give super-responsive handling and great corner speed. They are equipped with the latest reinforced V parts, 5.8mm ball connectors and damper caps for truly optimized performance. • Dedicated carbon fiber front-center stiffener elevates pitch rigidity without sacrificing roll flex, for improved front grip and cornering.. • Includes a dedicated new servo mount component. • Integrated stabilizer end and 5mm adjuster parts are used on the new soft front and rear stabilizers. • Aluminum steering bridge and pivot mounts allow fine tuning of steering Ackerman. • Comes in a handy and stylish carry case package. • Please note that motor, tires and R/C equipment are sold separately. Dedicated Components: Carbon front center stiffener Aluminum stiffener mount TA07RR servo mount Soft stabilizers (front & rear)

More
1:10 RC Impreza Mexico '04 (TT-01E)

RC on-road

1:10 RC Impreza Mexico '04 (TT-01E)

currently not in stock out of stock

Article number: 300047372 Product: 1:10 RC Impreza Mexico '04 (TT-01E) This is a re-issue for the classic Subaru rally body and TT-01 Type-E chassis combination, last produced in 2018! The WRC 2004 rally season saw major rule changes governing aspects such as body design, engine, suspension and more; Subaru would narrowly miss out on the Drivers’ Championship, with star driver Petter Solberg finishing in second to Sébastien Loeb. In the Rally Mexico, third race of the calendar, Solberg set fastest times on 9 of 15 stages but a 5’40" penalty would push him back to an eventual 4th place finish. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 441mm, width: 185mm. • The Impreza from the 2004 Rally Mexico is expertly depicted in durable polycarbonate, with separate molded mirror and wing parts. • Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc. • Dish wheels are molded in gold, and paired with tread pattern racing radial tires. • The TT-01 Type-E chassis features a shaft-driven 4WD system to offer easy handling and great customizability. • A wide range of Hop-Up Options is available to tune the TT-01 Type-E chassis. • Click here to see the item on the official Tamiya homepage.

More
1:10 RC Impreza Monte-Carlo 99 (TT-02)

RC on-road

1:10 RC Impreza Monte-Carlo 99 (TT-02)

currently not in stock out of stock

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Lancia Delta HF Integrale TT-02

RC on-road

1:10 RC Lancia Delta HF Integrale TT-02

currently not in stock out of stock

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

More
1:10 RC M-07 Concept Chassis Kit

RC on-road

1:10 RC M-07 Concept Chassis Kit

currently not in stock out of stock

Article number: 300058647 Product: 1:10 RC M-07 Concept Chassis Kit This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers responsive drive characteristics and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets.

More
1:10 RC Mazda MX-5 (M-05) Roadster

RC on-road

1:10 RC Mazda MX-5 (M-05) Roadster

currently not in stock out of stock

Article number: 300058624 Product: 1:10 RC Mazda MX-5 (M-05) Roadster This R/C assembly kit model recreates the 4th generation of the Mazda MX-5 (also known as the Roadster in Japan and the Miata MX-5 in the U.S.), the iconic car with a heritage dating back to 1989 and total sales in excess of 950,000. The dynamic and lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North American market cars) inline 4-engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill. The lightweight, narrow semi-monocoque frame offers an optimized weight distribution and a low center of gravity. A ground-hugging 4-wheel independent double wishbone suspension and a 3-piece steering linkage ensure excellent stability during high-speed cornering. Three wheelbase lengths (210mm, 225mm, 239mm) are possible by simply switching the position of the rear suspension parts, enabling a wide range of body choices available from Tamiya. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC MB 190E debis Zakspeed TT-01E

RC on-road

1:10 RC MB 190E debis Zakspeed TT-01E

currently not in stock out of stock

Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists.   Warning! Not suitable for children under 14 years.

More
1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E

RC on-road

1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E

currently not in stock out of stock

Article number: 300058638 Product: 1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!

More
1:10 RC Neo Scorcher (TT-02B)

RC buggys

1:10 RC Neo Scorcher (TT-02B)

currently not in stock out of stock

Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.   Warning! Not suitable for children under 14 years.

More
1:10 RC Nissan Skyline GT-R R33 (TT-02D)

RC on-road

1:10 RC Nissan Skyline GT-R R33 (TT-02D)

currently not in stock out of stock

Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D) Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes. About the Model • This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires.   Warning! Not suitable for children under 14 years.

More
1:10 RC Plasma Edge II TT-02B 4WD

RC buggys

1:10 RC Plasma Edge II TT-02B 4WD

currently not in stock out of stock

Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Porsche 911 Carrera RSR (TT-02)

RC on-road

1:10 RC Porsche 911 Carrera RSR (TT-02)

currently not in stock out of stock

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

More
1:10 RC RAYBRIG NSX Concept-GT (TT-02)

RC on-road

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

currently not in stock out of stock

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.

More
1:10 RC Skyline GT-R (R32) (TT-02D)

RC on-road

1:10 RC Skyline GT-R (R32) (TT-02D)

currently not in stock out of stock

Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink.

More
1:10 RC Suzuki Swift sport (M-05/239mm)

RC on-road

1:10 RC Suzuki Swift sport (M-05/239mm)

currently not in stock out of stock

Article number: 300058679 Product: 1:10 RC Suzuki Swift sport (M-05/239mm) Here comes a new subject on the evergreen M-05 chassis, depicting the Suzuki Swift sport. The Swift underwent a full model change in 2017, and impressively managed to improve overall design rigidity while getting lighter. It was given wider tread, a direct injection 1.4-liter inline-4 engine and 6-speed automatic transmission. About the model: • This is a 1/10 scale R/C model assembly kit. Length: 381mm, width: 167mm. • The sporty form of the car is captured by a lightweight, durable polycarbonate body pre-painted in yellow. Wheel arches and the separate polycarbonate light cases come pre-cut. • Separate injection molded parts are included to recreate side mirrors. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Comes with marking stickers to decorate the body. • The popular M-05 chassis has a wide range of Hop-Up Option parts available to tune the chassis.

More
1:10 RC The Grasshopper i 2005 2WD Re.Re

RC buggys

1:10 RC The Grasshopper i 2005 2WD Re.Re

currently not in stock out of stock

Article number: 300058346 Product: 1/10 RC The Grasshopper i 2005 2WD Re.Re Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 RC The Grasshopper II (2017)

RC buggys

1:10 RC The Grasshopper II (2017)

currently not in stock out of stock

Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.

More
1:10 RC The Hornet 2004 2WD Buggy LWA

RC buggys

1:10 RC The Hornet 2004 2WD Buggy LWA

currently not in stock out of stock

Article number: 300058336 Product: 1:10 RC The Hornet 2004 2WD Buggy LWA About the model: - Length: 400mm, width: 230mm, height: 150mm. Weight: 874g - Solid bathtub frame with side bumpers - High performance Type 540 motor - Independent swing axle front suspension with friction dampers -Rolling rigid axle rear suspension with oil filled dampers - Sealed rear gearbox to protect diff gear during off-road running -Original 3-piece assembly wheels compatible with optional ball bearings (sold separately) - Straight ribbed racing front tires - Spiked buggy rear tires - Durable, shock absorbent polycarbonate body shell - Reinforced resin bumper - TEU-101BK Electronic Speed Controller

More
1:10 RC Top Force Evolut. (2021) 4WD PB

RC buggys

1:10 RC Top Force Evolut. (2021) 4WD PB

currently not in stock out of stock

Article number: 300047470 Product: 1:10 RC Top Force Evolut. (2021) 4WD PB • This is a 1/10 scale R/C model assembly kit. Length: 400mm, width: 250mm, height: 190mm. Wheelbase: 270mm. • The stylish body is molded in polycarbonate, pre-painted and cut, with body mount holes already made. • Features double deck frame and damper stays crafted in lightweight and rigid carbon fiber material. • The shaft-driven 4WD chassis includes aluminum front and rear ball differentials for high quality setup, as well as aluminum high capacity dampers for superior shock absorption. • Choose between rigid and one-way counter gear options. • Item 53791 universal shafts are employed front and rear, high-precision components for minimal speed loss, and smooth cornering. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

More
1:10 RC Toyota Gazoo Rac. WRT/Yaris WRC

RC on-road

1:10 RC Toyota Gazoo Rac. WRT/Yaris WRC

currently not in stock out of stock

Article number: 300058659 Product: 1:10 RC Toyota Gazoo Rac. WRT/Yaris WRC Tamiya welcomes a brand new rally car to the R/C model line-up with this kit recreating the Toyota Gazoo Racing WRT Yaris that is competing in the 2018 WRC. A multi-part body captures with elegance the form of this aerodynamically honed car, which boasts a 380PS, 1.6-liter 4-cylinder turbo engine and 4-wheel drive with active center differential. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 416mm, width: 188mm, height: 146mm. • The streamlined 2018 Yaris WRC form is captured in polycarbonate, with individual polycarbonate parts recreating 2 types of front canard, front light cases and rear bumper blocks. • Separately molded plastic components depict rear wing (2 parts) and side mirrors. • Dish wheels are molded in gun metal and paired with racing radial tires (Item 50419). • Stickers are included to recreate the numerous markings, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that rear light cases are not included, and LEDs (both front and rear) cannot be installed.

More
1:10 RC Toyota Supra Drift Spec TT-02D

RC on-road

1:10 RC Toyota Supra Drift Spec TT-02D

currently not in stock out of stock

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
1:10 RC TT-02R Chassis Kit

RC on-road

1:10 RC TT-02R Chassis Kit

currently not in stock out of stock

Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - it was last produced in Autumn 2016. This refined, racespec TT-02 chassis has a wide range of option parts and components to make it ready to race! Of course, it retains the TT-02's versatility and easy drive. Featured Components: Aluminum Rear Uprights (3-Degree Toe-In) Aluminum Motor Mount TT-02 Alu. Propeller Joints TT-02 Aluminum Propeller Shaft TT-02 Full Ball Bearing Set 3x18mm Alu. Turnbuckle Shafts Medium-Narrow Racing Slick Tires 5mm Ball Connectors CVA Oil Dampers & Springs Metal Drive Shafts, Wheel Axles and Gearbox Joints 4mm Aluminum Flange Lock Nuts (Blue) 5mm Aluminum Short Ball Connector Nuts (Blue) 5mm Aluminum Ball Connectors (Blue) About the Model • This is a 1/10 scale R/C chassis assembly kit. Length: 376mm, Width: 182mm. • Aluminum rear uprights provide 3 degrees of toe-in for greater stability when cornering. • Motor mount, propeller shaft and joints are also lightweight and tough aluminum. • Greater efficiency is achieved in the drivetrain with aluminum center shaft and cup. • Silver high-performance CVA oil dampers are paired with cool black springs. • Comes with stylish 10-spoke wheels and slick tires. • Body, battery pack, motor and R/C equipment are not included.

More
1:10 RC VW Beetle Rally (MF-01X)

RC on-road

1:10 RC VW Beetle Rally (MF-01X)

currently not in stock out of stock

Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

More
1:12 RC Midnight Pumpkin Black Edition

RC off-road

1:12 RC Midnight Pumpkin Black Edition

currently not in stock out of stock

More
1:14 RC 40ft NYK  Container Semi-Trailer

RC trucks

1:14 RC 40ft NYK Container Semi-Trailer

currently not in stock out of stock

Article number: 300056330 Product: 1:14 RC 40ft NYK Container Semi-Trailer Nippon Yusen Kaisya (NYK) is one of the largest shipping companies in the world. This is the Tamiya replica in 1/14 scale and it is the second container model released in the Tractor Trailer R/C category. The container features an aluminum frame with durable ABS front, top, and side panels. The well-known NYK logos are reproduced on the included vinyl sticker sheet, and the container can be detached from the semi-trailer after assembly. The 3-axle semi-trailer chassis comes with a realistically reproduced leaf-spring suspension. This semi-trailer can be connected to any Tamiya 1/14 R/C Tractor Truck and a variety of Option Parts can also be installed for enhanced realism.

More
1:14 RC SCANIA R470 Highline 4x2 Kit

RC trucks

1:14 RC SCANIA R470 Highline 4x2 Kit

currently not in stock out of stock

Article number: 300156318 Product: 1/14 RC EU Truck Scania R470 Highline Kit It has been a long time in coming, but Tamiya has heard the demand from fans around the world and is now proud to present award-winning truck maker Scania's state-of-the-art R470 Highline as the newest addition to our unique 1/14 scale R/C tractor truck series. About the Scania R470 Highline Swedish manufacturer Scania has a long history of producing exceptional trucks designed for long-haul transport. The company's R-series made its debut in 2004 and quickly built a highly favorable reputation that led to it being given the prestigious International Truck of the Year award in 2005. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

More
120 of 123 Items