Pièce detachées voiture RC & tuning RC
Pièce detachées voiture RC & tuning RC
Pièces de rechange RC & pièces de tuning
Alum. Damper Retainer -1mm (4) Blue anod
300053876€27.99
Article number: 300053876 Product: Alum. Damper Retainer -1mm (4) Blue anod Machined aluminum holder with high rigidity and excellent precision. It is possible to lower the vehicle height by lowering the position of the spring set by 1mm compared to the aluminum mount of the OP595TRF shock. It also makes the initial adjustment of the damper spring more reliable. Scope of delivery: 4x Spring Plates Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
Alum. Direct Servo Horn (TAMIYA/FUTABA)
300042248€15.99
Article number: 300042248 Product: Alu Servohebel (TAMIYA/FUTABA) The direct servo horn without the servo saver function produces a sharper steering response. In addition, the mounting point of the pillow ball has been raised by 1.5 mm to eliminate linkage interference and secure the steering angle. Furthermore, in addition to screwing, a clamp type is adopted for the serration part, and it can be fixed more securely by tightening with a 2 x 5 mm cap screw. Scope of delivery: 1x servo arm Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
Aluminum Reinforced Tape 50mm (2)
300053351€10.291 m = €5.15
Article number: 300053351 Product: Aluminum Reinforced Tape Tamiya's adhesive aluminum tape is ideal for gas operated vehicles that have an exhaust pipe in close proximity to the polycarbonate body. The aluminum heat resistant tape acts as a shield and prevents damage to a polycarbonate body when high heat is nearby. Scope of delivery: 1x aluminum tape reinforced Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
Aluminum Spacer Set 5,5mm
300053539€14.69
Article number: 300053539 Product: Aluminum Spacer Set 5,5/3mm blue/silver ★This set includes 3mm inner/5.5mm outer diameter spacers of various thicknesses: 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm and 3mm. ★Use them for a whole variety of purposes!
Pièces de rechange RC & pièces de tuning
Anti-Wear Grease (3g)
300053439€12.991 kg = €4,330.00
Article number: 300053439 Product: Anti-Verschleiß Fett (3g) This anti-wear grease is particularly suitable for lubricating rotating parts. Due to the high viscosity, a very good adhesion to the rotating parts is achieved. Temperature stable, the grease retains its viscosity over a wide temperature range. The fine and narrow nozzle guarantees a precise application of the grease. Area of application: differential gears, shafts, drive axles Included: 1x tube (3g) Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
Axle Shafts for TRF420 DC *2
300042363€18.79
Article number: 300042363 Product: TRF Axle Shafts for TRF420 DC (2) These shafts, which were originally a part of the revamped universal shafts on the TRF420 Chassis (Item 42345), are now to be sold separately. Item Contents/Information • Axle Shafts x2 • Compatible with double cardan drive shafts. *Requires 4mm thickness bearings if fitting to chassis other than the TRF420.
Pièces de rechange RC & pièces de tuning
Ball Bearing Set TT-01E
300054025€46.99
Article numbe: 300054025 Product: TT-01E Ball Bearing Set (20) Ball bearings are a great first step in tuning your car, minimizing power loss in the drivetrain and increasing durability. This set also includes components for use with steering posts, which give sharp response. Scope of delivery: 1x Ball Bearing Set (20 pieces) Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
Body Mount Extension Set 5,5mm (4)
300054604€7.69
Article number: 300054604 Product: Body Mount Extension Set 5,5mm (4) This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models. Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4 Usable with 5.5-6mm diameter body mounts. Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.
Pièces de rechange RC & pièces de tuning
Buggy Champ Ball Diff Set Ⅱ
300054897€50.99
Article number: 300054897 Product: Buggy Champ Ball Diff Set Ⅱ This is a re-issue of a previously limited edition product (Item 84113), this time in our regular Hop-Up Option parts series! This versatile ball differential is compatible with a number of our buggy re-issues, and gives efficient and controllable power. Item Contents/Information • Compatible with Item 58441 Buggy Champ (2009), Item 58452 Sand Scorcher (2010) and Item 47304 Fighting Buggy (2014). • Also includes a 1150 ball bearing, 3mm differential balls (x8), plus 4mm and 5mm screws. • Differential adjustment can be performed with the differential installed in the gearbox. Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
Buggy Light Pod Set for LEDs
300054972€12.49
Article number: 300054972 Product: Buggy Light Pod Set for LEDs Add even more realism to your Tamiya R/C buggy with a light show facilitated by these handy pods! Two different styles are featured, and they are compatible with a range of buggies and separately sold 5mm LEDs. Item Contents/Information • R Parts (Pod) x2 (four each of round and square) • Polycarbonate Lenses (Round/Square) x4 each • Separately sold 5mm LEDs can be fitted and lit up via units such as Item 53909 Tamiya LED Light Unit (TLU-01). • Lenses are supplied on a polycarbonate sheet and require cutting out. • Compatible with WR-02 and GF-01 series chassis using the P Parts (bumper) from the GF-01CB chassis.
Pièces de rechange RC & pièces de tuning
Carbon Rein.F Parts TA05-IFS
300054031€10.79
Article number: 300054031 Product: TA-05/IFS Carbon Rein.F Parts These new hub carriers are made from carbon fiber-reinforced resin material for increased durability. Tougher hub carriers also mean sharper steering response, giving the car better handling characteristics. Scope of delivery: 1x F parts (2 parts) Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
CC-01 Alum. Oil Damper Set (4)
300054541€64.99
Article number: 300054541 Product: CC-01 Alum. Oil Damper Set (4) These aluminum oil dampers are for use with the Tamiya cross-country CC-01 chassis, providing superior cushioning on difficult surfaces. The set features parts to make 4 dampers, with silver color anodized cylinders and dark titanium anodized caps. • Damper Cylinder x4 • Upper & Lower Cylinder Caps x4 each • V Parts x4 • Small parts included for attachment to the chassis. Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
CC-01 Aluminum Motor Mount
300054665€28.99
Article number: 300054665 Product: CC-01 Aluminum Motor Mount Use in place of kit C2 parts, this metal motor mount gives a rigid attachment and has a cooling effect. For use with 16T-20T pinion gears. Warning! Not suitable for children under 14 years.
Pièces de rechange RC & pièces de tuning
CC-01 Assembly Univ. Shaft (2) front
300054608€38.99
Article number: 300054608 Product: CC-01 Assembly Univ. Shaft (2) front This is a universal drive shaft that is designed to be used with the Tamiya CC-01 chassis platform. By replacing the standard steel dog bone and joint cup that are used in the base kit the drivetrain of the vehicle becomes more efficient and there is less power loss to the drive wheels. Specs and Features: Contains 2x CC-01 Universal Shafts. Reduce power loss in the drivetrain, giving smoothness and better efficiency. Reduces risk of shafts coming loose. Parts are finished in a color reminiscent of actual road cars, enhancing your model's realism. Compatible with CC-01 Chassis cars.
Pièces de rechange RC & pièces de tuning
CC-01 Stroke extension Link
300054519€59.99
Article number: 300054519 Product: CC-01 Stroke extension Link Attach this option part to your cross-country CC-01 chassis model for improved suspension performance on rough terrain. It is fitted to the top damper attachment point to provide a much longer stroke from the damper. Set contents • Aluminum Pivot Link Mount x2 • Aluminum Pivot Link x2 • 630 Ball Bearing x2 • 5mm Ball Connector x2 • 3x10mm Screw x2 • 2x5mm Screw x2
Pièces de rechange RC & pièces de tuning
CC-02 Alu. Spur Gear Mount
300054970€16.79
Article number: 300054970 Product: CC-02 Alum. Spur Gear Mount This aluminum component can be used in place of the CC-02 chassis’ standard plastic part, promising boosts to overall rigidity and acceleration. Item Contents/Information • Aluminum Spur Gear Mount x1 • For use in place of the kit-standard plastic A5 component, this mount both improves chassis rigidity and increases drivetrain efficiency, the latter leading to even better drive. • This component is attached using three screws (kit-standard part uses two), for a more secure setup. • Lightweight aluminum part features a stylish gun metal color anodized finish. • Shims are included to fine-tune attachment. • Compatible with CC-02 chassis cars.