Model kit sandpaper
Ensure perfect surfaces with our modelling sanding material! From rough preparation to a fine finish: our sanding accessories help you to remove unevenness and optimally prepare your models for painting. If you want to find out more about our model kit sandpaper, you can read on here.
Model-making abrasive material
#1500 Sanding Cloth, model hobby sanding sheet
300087233€4.69
This #1500 sanding cloth brings controlled surface refinement to model hobby work with a fine abrasive grade and a soft sheet format. The 170 x 130 mm sheet sits comfortably in the hand and reaches flat panels, edges and smaller shaped sections where a rigid abrasive can feel less forgiving. The cloth can be used for both dry and wet sanding, making it easy to match different finishing steps and material needs. The #1500 grit is part of a 5-grade range that also includes #600, #1000, #2000 and #3000, with the number indicating the grit level. Its soft construction develops limited fold lines, a useful detail when working across visible surfaces where deeper scratch marks can interrupt the next coat or polishing stage. One sheet is included. On the bench, it suits careful smoothing between shaping, priming and finishing steps on model hobby projects. The flexible sheet format also makes it easier to wrap around contours or guide across narrow areas with steady pressure when a clean, even surface matters. Warning! Not suitable for children under 14 years.
Model-making abrasive material
1500 Sanding Sponge Sheet, model finishing abrasive
300087150€6.19
The 1500 Sanding Sponge Sheet brings fine surface finishing to model work with a flexible abrasive layer bonded to a cushioned backing. That combination helps the sheet sit against curves, edges and narrow parts with steadier contact than a rigid sanding surface, making it useful for refining small components by hand. The 1500 grit is suited to light finishing passes where surface texture needs to be reduced without removing too much material at once. The sponge base can be cut into smaller pieces for targeted work on tubes, rods and other shaped sections, and the sheet format leaves room to prepare custom sizes for different stages of a build. Used dry by hand, it supports controlled smoothing on detail areas, cleanup around joins and preparation before the next finishing step. On the workbench, the sheet fits the kind of close, careful handling used on scale parts, body details and other small sections that need a softer touch. It also works well when a narrow strip or small pad is needed to reach contours that are awkward for a standard flat abrasive sheet. Warning! Not suitable for children under 14 years.
Model-making abrasive material
2000 Sanding Sponge Sheet, model finishing sheet
300087170€6.19
The 2000 Sanding Sponge Sheet combines a fine aluminum oxide abrasive with a 5 mm flexible sponge base, giving model finishing work a controlled feel on shaped parts and delicate surface areas. On plastic models, the sheet is suited to removing small protrusions while keeping contact more even across contours, where a rigid abrasive can skip or dig in. Its flexible backing bends around curved surfaces and settles into harder-to-reach corners, which helps when refining sculpted folds, rounded panels or tight edges. The 114 x 140 mm format leaves enough area for broad passes, yet the sheet can also be cut with a modeling knife into smaller sections for narrow parts, touch-up work or repeated use at the bench. Wet sanding compatibility adds another handling option when a cleaner sanding process or a finer finish is needed. Beyond plastic models, the same sheet can be used on wood and metal finishing materials, which makes it useful across different stages of a build or restoration project. It fits naturally into surface preparation before primer, smoothing after seam cleanup, and final refinement before paint or detail finishing, especially where curved shapes call for a sanding surface that can flex with the part. Warning! Not suitable for children under 14 years.
Model-making abrasive material
3000 Sanding Sponge Sheet, model sanding sheet
300087171€6.19
The 3000 Sanding Sponge Sheet brings controlled finishing to model work with a flexible sponge base and an aluminum oxide abrasive surface. Sized at 114 x 140 mm with a 5 mm sponge thickness, it adapts to shaped parts while keeping a broad working area for steady, even passes across detailed surfaces. Its fine 3000 grit suits light refining work where raised spots, small imperfections and transition areas need a smoother finish before the next stage. The sponge base bends into curved sections and reaches corners that are awkward with a rigid sanding block, which helps when working on body lines, clothing folds or other sculpted details. Because the sheet can be cut with a modeling knife, smaller sections can be prepared for narrow parts or confined areas instead of using the full sheet each time. Wet sanding use adds another practical option for controlled finishing on plastic models, and the abrasive surface is also stated for wood and metal materials. On the bench, the sheet supports careful cleanup after assembly, surface preparation before paint, and final touch-up work on shaped components. Cut sections can be kept beside files, knives and other finishing tools for repeated detail work on corners, edges and curved forms. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Fine Lapping Film #3000, polishing film, 3 sheets
300087144€9.99
Fine Lapping Film #3000 is a finishing supply for surface work on model parts, using polyester film coated evenly with fine abrasive particles to reduce blemishes and leave a smooth, consistent finish. The #3000 grade is suited to careful polishing stages where control matters, especially on clear parts, painted sections, and small areas that benefit from a flat, flexible sheet rather than a bulkier abrasive block. The uniformly coated surface helps maintain an even contact pattern during polishing, which is useful when refining plastic and metal components without concentrating abrasion in one spot. As a thin film format, each sheet is easy to position on narrow edges, curved sections, and detailed areas where precision matters. The material can also be used for wet sanding, adding another working method for controlled surface refinement during paint preparation or final finishing. With 3 sheets in the pack, the film fits neatly into repeated bench use, whether the task is cleaning up minor surface marks, improving clarity on transparent parts, or speeding up polishing on painted components. It suits hobby workflows that move step by step through preparation, correction, and final surface refinement. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Fine Lapping Film #8000, sanding film, 3 sheets
300087200€10.49
Fine Lapping Film #8000 brings an extra-fine abrasive step to paint finishing, helping model builders smooth rough surfaces, seams and joints before the final polish. The 3 pink sheets measure 93 x 228 mm each and offer a thin, flexible format that can be cut or handled to suit broad panels as well as smaller sections on scale builds. Each sheet is uniformly covered with fine abrasive particles, which supports an even contact pattern during sanding and helps avoid patchy results on painted areas. The #8000 grade is positioned as a pre-treatment for compound polishing, making it a useful stage when working toward a glossy surface finish. Wet sanding compatibility adds another practical option, especially when a controlled, refined surface correction is needed on delicate paintwork. On the workbench, the film suits finishing passes on body panels, cleanup around joints, and surface preparation before compound use. It fits naturally into model painting routines where a smoother base and a more consistent sheen matter across the final finish.
Model-making abrasive material
Finishing Abrasives Fine Set, model sanding sheets
300087010€5.99
The Finishing Abrasives Fine Set brings 5 sanding sheets into model work where surface correction, smoothing and preparation need controlled grit steps rather than a single coarse pass. With 400, 600 and 1000 grades in one pack, the set supports gradual refinement on parts that need shaping first and a cleaner finish afterward. The sheet mix includes 2 pieces of 400 grit, 1 piece of 600 grit and 2 pieces of 1000 grit, giving a practical spread for workshop tasks around body shells, detail parts and scratch-built sections. The abrasive can be used on metal, wood and model materials such as ABS or styrene, which makes the set useful across different stages of a build or modification. Wet sanding helps carry away residue during finer finishing, while dry use suits quick corrections and edge work at the bench. The clog-resistant surface helps the abrasive keep cutting more consistently through repeated use. On a build table, the finer 1000 grit sheets suit final smoothing before paint-related steps, while 400 and 600 grit grades handle earlier correction and blending work. The flat sheet format stores easily with other workshop supplies and can be brought out whenever seams, edges or filled areas need a more even surface. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives Mid., sanding sheets, 5-pack
300087009€4.99
Finishing Abrasives Mid. brings 5 sanding sheets into the workshop for modification and finishing work on model surfaces. The pack combines 180 grit, 240 grit and 320 grit grades, so heavier correction, intermediate smoothing and finer surface preparation can be handled with one set while parts move from shaping to paint-ready refinement. Each sheet measures 180 in the listed format and is intended for use on metal, ABS and wood. The mixed grit layout gives 2 sheets of 180, 1 sheet of 240 and 2 sheets of 320, which helps match the abrasive cut to the task instead of forcing one grade across every step. Wet or dry use changes the working method to suit dust control, surface feel or the material being refined. The clog-resistant abrasive surface keeps contact more even during repeated sanding passes, which is especially useful when cleaning seams, adjusting edges or refining filled areas on scale builds. On the bench, the coarser sheets can be used to correct joins and reshape small sections, while the finer grades help prepare panels, body parts or wooden components for the next coat or finishing stage. The format also suits keeping several grit levels close at hand during one build session, so surface correction and final smoothing can follow in a clear sequence. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P1000, sanding sheets
300087057€3.49
Finishing Abrasives P1000 brings controlled surface refinement to model building and modification work. The 3-sheet pack is intended for finishing tasks on Tamiya builds, where a fine abrasive grade helps even out transitions, tidy edges and prepare parts for the next stage at the workbench. The P1000 grade suits detail-focused sanding where a coarser sheet would remove too much material. Each sheet can be used on metal, ABS and wood, which makes the pack useful across mixed-material projects such as body parts, structural sections and scratch-built additions. Wet or dry application gives flexibility in how the abrasive is handled during different stages of shaping and finishing. The clog-resistant surface helps maintain a more even cut while working across flat sections, corners and smaller contact points. At the bench, the sheets fit naturally into repair, conversion and paint-prep routines, whether smoothing filler, refining joins or cleaning up modified parts before the next coat. The compact 3-sheet format also makes it easy to keep a fresh abrasive grade ready alongside knives, files and putty during ongoing model work. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P1200, sanding sheets
300087058€3.89
Finishing Abrasives P1200 brings controlled, fine sanding to model making and detail work, with a grit grade suited to refining surfaces before the next finishing step. The sheets are made for modification and finishing tasks on Tamiya builds, where clean transitions and even surfaces matter across small parts and visible sections. The abrasive can be used on metal, plastic and wood, which makes it useful across mixed-material projects without changing to a different sheet for each surface. Wet or dry application allows the sanding method to match the task, whether a damp pass is preferred while smoothing a painted area or a dry pass suits quick correction work on edges and joins. The clog-resistant surface helps the abrasive keep cutting more evenly during repeated strokes, especially when working on filler, coatings or fine surface irregularities. The pack contains 3 sheets, giving material for repeated finishing sessions or separate use across different stages of a build. At the workbench, P1200 grit suits the point where shaping gives way to refinement, such as smoothing a seam after adjustment, evening out a repaired section or preparing a surface for further coating. It also fits small, careful corrections on parts that need a lighter touch than coarse abrasives can provide. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P1500, sanding sheets
300087059€3.89
Finishing Abrasives P1500 brings a fine sanding grade to modification and finishing work on model parts, with 3 sheets sized for repeated use across shaping, cleanup and paint preparation. The P1500 surface is intended for refining rather than heavy removal, making it useful where a smoother finish is needed before the next step on metal, ABS or wood. The sheets can be used wet or dry, so the sanding method can match the material and the stage of work. Wet use helps carry away residue during fine surface work, while dry use suits quick corrections during fitting or edge cleanup. The clog-resistant abrasive surface keeps the sheet working longer during repeated passes, which is especially useful when smoothing filled areas, blending transitions or preparing small sections for paint. The thin, flexible sheet format also makes it easier to follow flat faces, edges and gentle curves on model components. On the bench, this grade fits the later stages of body preparation, part refinement and finishing touches before colour coats or final assembly. It also suits small correction work between build steps, where a controlled abrasive surface is needed instead of a coarser cut. For model making, workshop touch-ups and careful surface preparation, these 3 P1500 sheets add a precise finishing material to the tool set. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P2000, sanding sheets
300087060€3.79
Finishing Abrasives P2000 brings controlled surface refinement to model work where the last sanding stages shape the final look. The fine P2000 grit is suited to modifying and finishing tasks on Tamiya builds, helping prepare surfaces for clean paint application and careful detail work. Each sheet can be used on metal, wood and model materials, which makes the set useful across different parts of a single build or across separate workshop projects. The abrasive can be used wet or dry, so the sanding method can be matched to the material and the stage of work. Its clog-resistant surface helps the abrasive keep cutting consistently during longer finishing sessions, especially when smoothing primer, refining filled areas or evening out small surface marks. With 3 sheets in the pack, the set fits naturally into regular bench use, whether the task is correcting a seam line on a body shell, softening an edge on a fabricated part or preparing a painted section for the next coat. The fine grade also suits careful touch-up work where a lighter abrasive action is needed than in earlier shaping steps. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P400, sanding sheets, 3-pack
300087054€2.89
Finishing Abrasives P400 brings controlled surface preparation to model building, repair and finishing work with a medium grit suited to refining parts before the next stage. The sheets are intended for modifying and finishing Tamiya ranges and can be used on metal, wood and plastic, making them useful across mixed-material builds on the workbench. The P400 grade is suited to smoothing joins, cleaning up adjusted edges and evening out surfaces after shaping or correction work. Wet or dry use allows the sanding method to match the task, with water helping manage sanding residue on delicate areas and dry use supporting quick bench work between assembly and paint preparation. The clog-resistant abrasive surface helps maintain cutting action through repeated passes, which is especially useful when working across seams, corners and small shaped sections. With 3 sheets in the pack, the set fits routine workshop use such as part cleanup, body preparation, scratchbuilt detail work and general finishing on hobby projects. It also works well as a bench staple for keeping different grit stages organised alongside fillers, primers and other modelling supplies. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P600, sanding sheets
300087055€2.89
Finishing Abrasives P600 brings controlled surface refinement to model making, with a grit grade suited to modification work and finishing passes on parts that need a smoother, more even surface before the next step. The sheets are intended for use when modifying and finishing Tamiya builds, where steady abrasion helps tidy transitions, soften small imperfections and prepare components for further treatment. The abrasive material works on metal, wood and synthetic surfaces, which makes the pack useful across different stages of a build and across mixed-material projects. P600 grit sits in a practical range for refining rather than heavy stock removal, making it a strong choice when seams, edges or worked areas need a more uniform surface. The sheets can be used wet or dry, allowing the sanding method to match the material and the task. A clog-resistant surface helps maintain cutting action through repeated use, which supports cleaner, more consistent finishing on detailed parts. On the bench, these sheets fit naturally into body preparation, part cleanup and final surface correction before painting or after adjustment work. The pack contains 3 sheets, giving a ready supply for repeated workshop use across multiple model projects. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P800, sanding sheets 3-pack
300087056€2.89
Finishing Abrasives P800 is a 3-pack of sanding sheets made for modification and finishing work on modelmaking projects. The P800 grit gives a fine abrasive grade suited to smoothing surfaces, refining transitions and preparing parts for later paint or detail steps. Each sheet is thin and flexible, which helps when working around edges, corners and shaped sections where rigid sanding tools can be less precise. The sheets are suitable for metal, plastic and wood, covering the main materials often found in scale builds and workshop repairs. Wet or dry use allows the sanding method to match the task: water can help control residue during careful finishing, while dry sanding suits quick corrections and general surface preparation. The clog-resistant surface supports more even abrasion during repeated passes, which helps maintain a steady finish on small components and narrow contact areas. On a workbench, these sheets fit naturally into body preparation, part cleanup and final surface refinement before painting or assembly. They also suit touch-up work on already built sections, where controlled abrasion matters more than heavy material removal. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives Ultra Fine Set, sanding sheets
300087024€5.89
The Finishing Abrasives Ultra Fine Set brings 5 sanding sheets together for careful surface work on model builds and detail parts. With 1200, 1500 and 2000 grit grades in one pack, the set supports the later stages of shaping, smoothing and finish preparation where small surface marks and transitions need a lighter touch. The sheet mix includes 1x 1200 grit, 2x 1500 grit and 2x 2000 grit, giving a clear progression across very fine abrasive levels. These abrasives can be used on metal, wood and plastic, which makes the set useful across mixed-material model work rather than only one surface type. Wet or dry application allows the sanding method to match the task at hand, and the clog-resistant construction helps the abrasive surface stay usable during longer finishing sessions. On a workbench, the finer grades suit cleanup after filling, seam reduction, paint preparation and final surface refinement before the next coat or finishing step. The compact 5-sheet format also makes it easy to keep several grit options close at hand during careful modification work on scale models and accessories. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Cloth #1000 Grit, Model Sanding Sheet
300087232€4.69
This #1000 sanding cloth brings controlled abrasion to model finishing work, combining a soft sheet format with a mid-fine grit that suits smoothing passes where a surface needs refinement without overly aggressive cutting. The 170 x 130 mm size gives a broad working area for hand use while still fitting neatly on a bench beside paints, fillers and body parts. The cloth can be used for both dry and wet sanding, so the same sheet can support different stages of preparation depending on the material and finish being worked. The grit number identifies the abrasive grade, and within the available range from #600 to #3000, #1000 is positioned for smoothing work after coarser correction and before finer finishing steps. Its soft construction develops fewer strong fold lines than stiffer abrasive sheets, which helps keep pressure more even across contours and reduces the risk of deep scratch marks on the surface. On scale bodies, fairings, panels or other hobby components, the sheet can be folded for narrow sections or used flat across broader areas. It also suits workshop routines where one abrasive sheet needs to move between edge work, curved parts and general surface preparation while keeping handling simple and direct. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Cloth #2000 Grit for Wet and Dry Use
300087234€4.69
This #2000 grit sanding cloth brings fine surface finishing into model hobby work with a 170 x 130 mm sheet that is easy to handle on flat sections, edges and smaller shaped areas. The fine abrasive grade supports controlled smoothing when paint, primer or filler needs a more delicate cut than lower grit sheets deliver. The cloth can be used for both dry and wet sanding, which allows the same sheet to fit different stages of bench work. Wet use can help carry away sanding residue during finishing, while dry use suits quick correction passes between steps. Within the available range of 5 types, the number after the # mark identifies the grit level, and this version is the #2000 grade. The sheet format also makes it simple to cut or position for targeted work where a bulky sanding block would be less practical. On a model bench, it suits refining painted panels, easing back filler transitions and preparing surfaces for the next coat. The soft cloth structure develops limited fold lines during use, helping avoid pronounced scratch marks when the sheet is wrapped around contours or guided by hand across detailed parts. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Cloth #3000 Grit for Wet and Dry Sanding
300087235€4.69
This sanding cloth in #3000 grit is made for model hobby finishing where a smooth, controlled surface matters. The soft cloth format combines fine abrasion with a flexible feel, making it easier to work across curved parts, flat panels and narrow edges while keeping the sanding action even. At 170 x 130 mm, the sheet offers enough area for repeated passes before a fresh section is needed. The #3000 grit grade suits light refining work, including smoothing surfaces between finishing steps and reducing minor marks before the next stage. The cloth can be used for dry sanding or with water for wet sanding, so the same sheet adapts to different materials and finishing routines. Its construction develops limited fold lines during use, which helps prevent deep scratches from sharp creases pressing into the surface. The pack contains 1 sanding cloth. On a workbench, the sheet can be wrapped around fingertips, folded for tighter access or laid flatter across broader sections to keep pressure consistent. It fits detailed model hobby tasks where a finer abrasive is needed for careful surface preparation and clean final touch-up work. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Sponge Sheet 1000, sanding sheet
300087149€6.19
The Sanding Sponge Sheet 1000 brings fine abrasive control to model finishing, combining a 1000 grit surface with a flexible foam backing that follows curves, edges and narrow round parts more closely than stiff sanding paper. In use, the sheet wraps around tubes, corners and small shaped sections, so the abrasive stays in contact while material is removed in a measured way. The sponge layer gives the sheet a cushioned structure that helps maintain an even touch across uneven surfaces. That makes it useful for refining molded parts, smoothing shaped components and preparing areas that need a lighter finishing pass after coarser sanding steps. The sheet can also be cut into smaller sections when a build calls for work on seams, recesses or tight detail zones. Its hand-held format suits careful finishing on plastic, resin and other common model-making materials where control matters more than fast stock removal. On the bench, it fits naturally into paint preparation, part cleanup and final surface correction before the next stage of a build. It also works well for small cylindrical pieces and rounded edges where a flat abrasive tends to skip across the surface instead of following the shape. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Sponge Sheet 180, model sanding sheet
300087161€6.19
The Sanding Sponge Sheet 180 brings controlled abrasion to model finishing with an aluminum oxide surface bonded to a flexible 5 mm sponge base. That combination helps the sheet sit evenly on shaped parts while smoothing protrusions, seam lines and other raised areas that can interrupt a clean finish on plastic models. At 114 x 140 mm, the sheet offers enough area for broad passes across larger sections, yet it can also be trimmed with a modeling knife into smaller pieces for narrow edges, corners and localized correction. The sponge backing compresses slightly during use, which helps the abrasive stay in contact across curved surfaces instead of only touching the highest points. Beyond plastic models, the abrasive surface is also suited to finishing work on wood and metal, giving the sheet a clear role across different stages of bench work. The 180 grit sits in the more assertive end of the range for material removal and early surface preparation. On a workbench, that makes the sheet useful for refining body parts, shaped accessories and other detailed components before painting or further finishing steps. Wet sanding compatibility adds a second working method for jobs where a cleaner surface and closer control of residue are preferred. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Sponge Sheet 240, model sanding sheet
300087162€6.19
The Sanding Sponge Sheet 240 combines aluminum oxide abrasive with a 5 mm sponge base, giving model finishing work a controlled, adaptable contact surface. Its 240 grit suits general smoothing and surface preparation, especially when protrusions, seam lines or uneven spots need to be reduced across shaped parts and detailed contours. At 114 x 140 mm, the sheet offers enough area for broad passes while still being easy to trim into smaller sections with a modeling knife. That makes it useful for narrow edges, recessed areas and custom sanding shapes that match the part being worked on. The sponge layer bends with the surface instead of forcing a flat contact point, which helps maintain a more even finish on curves, corners and sculpted details. The abrasive format is suitable for plastic models and can also be used when finishing wood and metal parts. Wet sanding use adds another practical option during bench work, particularly when a cleaner sanding process is preferred on finely shaped components. On figures, body parts, panels or scratch-built details, the sheet supports careful material removal with close control over where the abrasive meets the surface. As part of a wider sanding range with 3 abrasion levels, the 240 version sits in the middle for balanced shaping and finishing tasks. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Sponge Sheet 320, model sanding sheet
300087163€6.19
The Sanding Sponge Sheet 320 brings controlled surface finishing to model work with an aluminum oxide abrasive layer bonded to a flexible 5 mm sponge base. That combination helps the sheet sit evenly against shaped parts while smoothing protrusions on plastic models, and it also suits finishing work on wood and metal. The 320 grit supports finer abrasion where a cleaner surface is needed before the next build step. With a 114 x 140 mm format, the sheet provides enough area for broad passes across larger sections while still remaining easy to handle at the bench. The sponge backing bends into curved panels, around sculpted forms and into harder-to-reach corners where a rigid abrasive can skip or dig in. When a smaller contact area is needed, the sheet can be cut with a modeling knife to match narrow edges, recessed details or compact parts. Wet sanding compatibility adds another working method for builders who want to adapt the finish process to the material and the stage of preparation. On scale models, figures and detail parts, the sheet supports careful cleanup after trimming, seam work or surface preparation. It fits neatly into finishing routines that move between broad smoothing and more targeted correction, especially on parts with changing contours and fine molded detail. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Sponge Sheet 400, model sanding sheet
300087147€6.19
The Sanding Sponge Sheet 400 brings controlled abrasion and a flexible backing to model finishing work, combining 400 grit cutting action with a sponge base that follows curves, edges and narrow round parts more naturally than a rigid sheet. In the hand, the surface can wrap around tubes, rods and shaped sections, making it easier to keep contact where flat abrasives tend to miss high and low spots. That flexible structure is especially useful during shaping, seam cleanup and surface preparation on parts with changing contours. The sheet can be trimmed into smaller sections for detail work on confined areas, which helps reserve a larger piece for broader passes on panels or formed components. The sponge layer also cushions pressure during sanding, giving more control when refining small parts and reducing the abrupt feel of a hard backing on delicate geometry. On the bench, this grade fits early to mid-stage finishing tasks where visible marks, edges or uneven joins still need material removed before moving on to finer abrasives. It suits hand sanding during model assembly, part cleanup and general hobby work, especially when cylindrical or curved pieces need a sanding surface that can bend with the shape instead of fighting it. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Sanding Sponge Sheet 600, sanding sheet for models
300087148€6.19
The Sanding Sponge Sheet 600 brings a controlled abrasive surface together with a flexible foam backing, making it easier to work across curves, edges and narrow parts that are awkward to reach with rigid sanding media. In model making and detail finishing, that combination helps smooth joins, refine shaped components and prepare surfaces with a more even touch. The 600 grit grade suits tasks that need a finer abrasive than coarse shaping, such as cleaning up small imperfections, evening out transitions and preparing parts before the next finishing step. The sponge base bends around rounded tubes and contoured pieces, so contact stays closer to the surface instead of catching only the high points. As a full sheet, it can also be cut into smaller pieces for tighter access around compact assemblies and delicate sections. This makes it useful on plastic model parts, hobby materials and other small components where controlled hand sanding matters. On the workbench, the sheet fits naturally into build and finishing routines, whether smoothing a curved part, tidying an edge or preparing a surface before paint is applied. The hand-held format supports precise, local work on individual areas without switching to bulky tools. Warning! Not suitable for children under 14 years.
Perfect surfaces with model making sanding materials
For precise and flawless results, the right model making sanding materials are essential. Whether you're preparing surfaces or adding the final touches – high-quality sanding materials will help you achieve perfect outcomes.
High-quality model kit sandpaper for precise results
Our model kit sandpapers are specifically designed to offer you the best precision for your projects. In our category, you'll find a wide selection of sandpaper, such as P1000 or P2000 grit. Our sanding sponges, available in 180, 400, or 3000 grit, are developed to optimise your model making projects. With the different sandpaper grits, you can handle everything from rough shaping to fine finishing, ensuring all steps are carried out with precision and taking your model to the next level. If you need multiple grits, our sandpaper sets are just what you need. Whether fine or very fine sandpaper, you'll find exactly what you're looking for.
Find the right sanding material for your projects
Whether you're tackling rougher tasks or perfecting delicate surfaces – we have the right model kit sandpaper for you. Explore our wide range of products and find exactly the materials you need for your next project.