Military model kits
Military model vehicles 1:35
1:35 US M113 Arm.Cavalry Assault Veh.(3)
300035135€25.99
Article number: 300035135 Product: 1:35 US M113 Arm.Cavalry Assault Veh.(3) With a cupola-cum-gun shield on the M60 machine gun, the M113 ACAV (Armored Cavalry Assault Vehicle) was an improvement on its base, the M113APC (Armored Personnel Carrier). This plastic model assembly kit accurately captures the M113 ACAV, of course including the added cupola/gun shield, and also recreating the crew seats, engine and more in the interior. Three figures in realistic pose are included in the kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M40 155mm Howitzer SPG (8)
300035351€92.99
Article number: 300035351 Product: 1:35 US M40 155mm Howitzer SPG (8) This is an assembly model of the U.S. Self-Propelled 155mm M40. It is a never before seen subject in the Tamiya line-up of 1/35 scale models. The kit uses all new tooling with the exception of the suspension parts as they are from the M4A3E8 Sherman "Easy Eight" model kit. The M40 was a significant step in U.S. Army artillery mechanization, pairing the M1 155mm gun with the proven M4 Sherman chassis. Armor was light given its intended use as a long range weapon (they were effective up to 23.5km) away from the front line, while the layout was changed from the M4 to allow a big fighting compartment at the rear to accommodate the big gun. It was fitted with smooth horizontal volute spring suspension (HVSS). Over 400 were produced before the end of WWII; although they never fought in the conflict, one example of their T83 prototype did. The M40 served in the Korean War, and was eventually replaced by the M53. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M42 Duster w:3 Figures
300035161€33.99
Article number: 300035161 Product: 1:35 US M42 Duster w:3 Figures The M42 Duster was an anti-aircraft vehicle used in conjunction with tank units, equipped with a pair of 40mm cannons on an open-top turret, and powered by a 500hp engine that let it achieve speeds of up to 70km/h. It was accepted into service with the U.S. Army in 1953 and proved an effective anti- aircraft weapons system. • 1/35 scale plastic model assembly kit. Length: 180mm, width: 93mm. • Gun detail, loader’s seat, rifles and more in the interior. • Three marking options included, offering a choice of U.S., Japan Ground Self Defense Force and former West German Army M42s. • Belt type tracks that can be painted and attached using Tamiya cement. • NEW for this RE-ISSUE: Three figures were originally included in the motorized version of this kit (Item 30027, from 1970). They depict crew in the turret, in the act of locating a target. Updated package and 4-language instruction manual.
Military model vehicles 1:35
1:35 US Mar.MBT M60A1 w/Reacti. Armor(3)
300035157€41.99
Article number: 300035157 Product: 1:35 US Mar.MBT M60A1 w/Reacti. Armor(3) USMC-operated M60A1s were among the first AFVs to reach the Persian Gulf War that mushroomed following the Iraqi invasion of Kuwait in 1990. Having originally been deployed in 1965, this veteran AFV needed updates to deal with modern missile technology, in the form of reactive armor. The resulting highly unique appearance is faithfully depicted by this plastic model assembly kit, which also artfully captures the different cast metal and canvas surface textures. Additionally included in the set are parts recreating spare wheels, jerry can, camo nets and much more! 1 full body commander figure and a loader torso figure are included to further up the realism. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US MBT M1A1 Abrams (2)
300035156€42.99
Article number: 300035156 Product: 1:35 US MBT M1A1 Abrams (2) This is a 1/35 scale plastic assembly kit model of the U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine. The massive, dynamic form of the tank has been realistically reproduced. Details such as engine grille and welded sections on armor plates have a rich finish. The model features 12.7mm and 7.62mm guns as well as smoke dischargers. Nylon mesh to depict the rear rack is included to enhance realism. In addition, a commander and a loader figures are also included in kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US MBT M1A2 Abrams Iraqi Freedom(2)
300035269€56.99
Article number: 300035269 Product: 1/35 US MBT M1A2 Abrams Iraqi Freedom(2) U.S. M1A2 Abrams 120mm Gun Main Battle Tank The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block. About the M1A2 Abrams The M1 Abrams, officially commissioned by the US military in 1980, was designed totally different from previous post-WWII US military tanks. Although fitted with the same 105mm cannon as the M60, the M1 was powered by a gas turbine engine and was fitted with spaced armor. Planned to be commissioned by the US military over a long period, the M1 was designed with future reforms in mind. In 1984, the M1A1 was developed with a 120mm smooth bore cannon, and a further variant the M1A1HA was later developed featuring depleted uranium armor. This then led to the M1A2, which was fitted with Intervehicular Information System (IVIS), Commander's Independent Thermal Viewer (CITV) turret and new style vision block. The M1A1HA and the M1A2 both played significant roles in Operation Iraqi Freedom, being deployed by land forces as well as the Marine Corps as they moved toward Baghdad. Model kit, Scale 1:35, Vehicle, 3 Figures, Manual, Decal, Length 283 mm.
Military model vehicles 1:35
1:35 US Med. MBT M26 Pershing T26E3 (2)
300035254€53.99
Article number: 300035254 Product: 1:35 US Med. MBT M26 Pershing T26E3 (2) About the M26 Pershing The U.S. Medium Tank M26 Pershing made its appearance at the end of WWII to allow the American army to stand up to the wrath of German tanks. The Pershing which was equipped with a long 90mm gun and exhibited incredible mobility, was first deployed to the European front in February 1945 as part of the effort to invade the German homeland. The Pershing, of which 200 were used against Germany until its surrender, successfully engaged Tiger I and Pz.kpfw. IV tanks. When the Korean War began in June 1950, the M26 also fought successfully against the rival T34/85 Soviet built tanks of the North Korean and Chinese volunteer armies. About the Model ★M26 U.S. Medium Tank Pershing plastic assembly kit. ★Length: 245mm, Turret with its 90mm long barrel gun and boat hull like underside, have been faithfully reproduced with an incredible level of detail. ★Crew hatches can be assembled in either the opened or closed position. Movable suspension forms to the landscape of dioramas. ★Small details like separate parts for the engine grills and cast iron appearance on the hull and the turret make kit seem even more real. ★Machine gun ammunition boxes and two crew figures (torso) are included. Decals for 4 different markings. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Navy PBR 31 MK.II Pibber Vietnam
300035150€47.99
Article number: 300035150 Product: 1:35 US Navy PBR 31 MK.II Pibber Vietnam This high-speed, heavily armed small craft was used heavily by U.S. forces in the Mekong Delta region. It is recreated with aplomb in this plastic model assembly kit, with details accurately captured from the hull form to the interior. The lethal 12.7mm and 7.62mm machine guns, plus the 40mm grenade launcher are realistically depicted along with a host of accessories such as jerry cans, plus 4 figures.
Military model vehicles 1:35
1:35 WWII Dt. Panzerjäger Nashorn (4)
300035335€70.99
Article number: 300035335 Product: 1:35 WWII Dt. Panzerjäger Nashorn (4) This is a highly detailed model of the WWII German tank destroyer Nashorn. The full size vehicle featured an 8.8cm gun also known as a PAK 43 and it was fitted to the upper surface of a light turret less chassis. Even though the vehicle was lightly armored, the PAK43 weapon was capable of penetrating 190mm of armor at 1,000 meters. The Nashorn saw action with German heavy antitank battalions fighting Soviet and Allied forces during much of the conflict. Due to its relatively low cost and superior mobility compared to heavier tanks it remained in production until the end of the WWII war. Decals included. Features: • The model accurately recreates the powerful form of the Nashorn, thanks to detailed research performed using an actual example of the vehicle in a museum in Russia. • Features faithful reproductions of the 71-caliber 8.8cm gun and complex fighting compartment. • Metal parts are used to ensure that the gun has authentic movement and weight. • Comes with 3 marking options, including winter and Eastern front versions. • 4 included figures depict driver and 3 crew members in a variety of realistic poses. Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 Ger. Sturmtiger 38cm
300032591€32.49
Article number: 300032591 Product: 1:48 Ger. Sturmtiger 38cm The Tamiya 1/35 Military Miniatures Sturmtiger is a classic kit that has been around for decades. The 1/48 scale version has received all new tooling and further extends the long line-up of kits offered in this smaller scale! The Sturmtiger was a seldom-seen variant of the Tiger I, using existing chassis and suspension to mount a mammoth 38cm caliber mortar for use against buildings and other fortifications in urban warfare. Only an estimated 18 were ever produced, between August and December 1944, and they were somewhat unwieldy in that they weighed around 65 tons. Nonetheless, they would still have proved a frightening foe to those who encountered them in the Battle of the Bulge, the Warsaw Uprising and the invasion of the German homeland. Warning! Not suitable for children under 14 years.
Military model vehicles 1:48
1:48 Tank destroyer Elefant
300032589€33.49
Article number: 300032589 Product: 1:48 Tank destroyer Elefant This is a 1/48 scale assembly model of the German Heavy Tank Destroyer Elephant. The newly tooled 1/48 Elefant has extensive detail, even at this smaller scale, thanks to the extensive research conducted by Tamiya's designers to make the 1/35 scale rendition. The development of the full-size Elefant is an interesting case study in weapons development. Its chassis was developed by Porsche in the design competition for the Tiger I, but while Porsche was sure enough of its success to ready 100 examples of the chassis before the end of the competition, the design was not chosen. The "left over" chassis were turned into the Elefant on the orders of Hitler in 1942 - some 90 examples were built by May 1943. With armor plates, up to 200mm thick and a powerful long-caliber 8.8cm gun, it was a formidable piece of equipment, and served German troops until the end of WWII.
Military model vehicles 1:48
1:48 US M1A2 Abrams
300032592€34.99
Article number: 300032592 Product: 1:48 US M1A2 Abrams This small-scale Military Miniature series model assembly kit recreates the formidable modern U.S. Main Battle Tank M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock-full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola, and more, and saw action in the conflict in Iraq in 2003. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 JGSDF Light Armored Veh.
300035368€46.99
Article number: 300035368 Product: 1/35 JGSDF Light Armored Veh. The latest kit to join the extensive 1/35 Military Miniature Series is this new kit of the Light Armored Vehicle, which recreates a domestic spec version of the vehicle such as that depicted in 1/48 by Item 32590 (previouslyreleased Item 35275 was an Iraq PKO spec vehicle). The Light Armored Vehicle is an integral part of Japan Ground Self-Defense Force (JGSDF) infantry units, key to the emphasis placed on mobility by recent policy changes. Around 1,900 in total have been provided to the JGSDF and the JASDF air arm. About the Model • This is a 1/35 scale plastic model assembly kit. Overall length: 128mm. • The unique form of the actual vehicle has been accurately replicated. • Features detailed synthetic rubber depictions of combat tires, transparent parts for headlights and tail lights, and a die-cast one-piece chassis for authentic weighty feel. • Assembly options include rooftop hatch in open or closed position, quadruple smoke dischargers (usually seen on command cars), and MINIMI machine gun. • A busy interior has recreations of seat, dashboard and accessories such as fire extinguisher. • Kit comes with seated driver figure depicted in the latest JGSDF body armor. • 3 marking options for vehicles with domestic JGSDF units are included.
Military model vehicles 1:35
1/35 Valentine Mk.II/IV
300035352€49.99
Article number: 300035352 Product: 1:35 Brit. Valentine Mk. II/IV This is an all new tooled model of the British Valentine Infantry tank in 1/35 scale. British armor doctrine in the 1930s up to the outbreak of WWII called for 2 types of tank - more mobile cruiser tanks and heavy, slow infantry tanks. The Valentine was a prolifically produced example of the latter (7,315 units, more than 30% of British tank production in WWII). It was based upon existing cruiser tank designs and relatively easy to manufacture, a critical point for the British military after it had lost so much material during the Dunkirk evacuation in 1940. The Valentine would see extensive action in North Africa, particularly the Mk.II and Mk.IV variants (they had different engines) depicted by this kit. Over 4,500 were also handed over to the Soviet Union under the lend-lease agreement, the Red Army using them mainly for recon work. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 Wespe Italian Front
300035358€42.99
Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.
Military model vehicles 1:48
1/48 Panther Ausf.D
300032597€32.99
Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.
Military model vehicles 1:35
1:35 Brit. BT. Matilda Mk.III/IV(3)
300035300€52.99
Article number: 300035300 Product: 1:35 Brit. BT. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296). Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. M10 IIC Achilles
300035366€49.99
Article number: 300035366 Product: 1/35 M10 IIC Achilles Here is the British Achilles tank destroyer, which appears in Tamiya 1/35 scale for the first time! The Achilles was a modification of the M10s which Britain received from the U.S., with the original 3-inch main gun replaced by the fearsome British 17 pounder. The vast majority of M10s were the M10 IIC variant, which was based upon the late-production M10 with distinctive enlarged turret-rear counterweight. Around 1,000 were produced between Spring 1944 and the end of WWII, the Allied forces making good use of it after the Normandy landings, benefiting from the power of the gun which allowed it to tear through Tiger I front armor. About the Model - This is a 1/35 scale plastic model assembly kit. - In-depth study of the real thing has enabled this highly accurate scale depiction of the Achilles. - Features newly-molded parts depicting the upper hull with its sloped armor, late production M10 turret counterweight, and long 17pdr gun. - Interior features excellent detail, including depictions of shell racks and multi-part 17pdr gun breech. - Comes with 3 full body figures – gunner and loader seated in the fighting compartment, and commander seated on the turret edge – plus a driver torso figure. All are brand new! - Lower hull, suspension, wheel and track parts are carried over from the acclaimed Tamiya 1/35 model of the M10 that served as the Achilles’ base. - New sprocket wheel parts depict late M10 components. - 2 planned marking options depict 93rd Anti-Tank Regiment (Italy, 1944) and 75th Anti-Tank Regiment (NW Europe) vehicles.
Military model vehicles 1:35
1:35 Brit. MBT Challenger 1 Mk.III (2)
300035154€44.99
Article number: 300035154 Product: 1:35 Brit. MBT Challenger 1 Mk.III (2) British forces in the 1991 Persian Gulf War were able to rely on a significant asset in the Challenger 1, its awe-inspiring 120mm main gun accounting for numerous Iraqi T-72 tanks, and the crew protected ably by front and side composite and reactive armor. This kit can be assembled to recreate a Challenger 1 used by British forces, or also NATO troops. Nylon mesh is included to recreate the baskets encircling the turret. Two highly realistic figures are included; one depicts a bescarfed commander in desert conditions, while the other captures a commander in the distinctive NATO cold-climate uniform. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Tank Churchill Mk.VII (6)
300035210€39.99
Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.
Military model vehicles 1:35
1:35 Brit. Univer. Carrier Mk.II (5)
300035175€21.49
Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Univers. Carr. Mk.II (3)
300035249€23.99
Article number: 300035249 Product: 1:35 Brit. Univers. Carr. Mk.II (3) During WWII, the British army used various small tracked personnel carriers such as the Universal Carrier Mk.II, which first appeared in 1942. Tamiya's plastic assembly model kit accurately reproduces this vehicle's compact design, suspension, and equipment. Included in the set are three figures to depict a driver, gunner, and radio operator as well as an additional two figures in North African front uniforms. Four kinds of decals are also included to allow you to depict the Universal Carrier Mk.II in a wide variety of battlefield settings including North Africa, Italy, and France. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit.Tank Cromwell Mk.IV Cruis.(1)
300035221€43.99
Article number: 300035221 Product: 1:35 Brit.Tank Cromwell Mk.IV Cruis.(1) This is a plastic assembly model kit of the Cromwell Mk.IV Cruiser tank, which served alongside the Churchill infantry tank after the Normandy landings in June, 1944. The distinctive riveted armor and turret have been precisely reproduced. The large road wheels, which allowed the Cromwell to move quickly on the battlefield, have also been accurately rendered. Parts are included to depict features which were unique to Normandy: "Normandy cowl" ducts which prevented the exhaust gases from entering the tank and hedgerow cutters, which were attached to the front of the tank to allow it to move through the thick brush. Five kinds of decals and a tank crewman figure are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Fr. Citroen Traction Staff Car (1)
300035301€31.49
Article number: 300035301 Product: 1:35 Fr. Citroen Traction Staff Car (1) This famous French sedan was produced from 1934 to 1957 and featured a lightweight monocoque body with a high performance torsion bar spring suspension. It also had a spacious interior and featured a front-wheel drive system and a low center of gravity. The car proved to be very easy to handle and was used by the French Army, the occupying German Army, and the Free French forces. It was also used by German forces through out the European front and as far away as Russia. •Length: 125mm, Width: 48mm. •This is a 1/35 scale assembly kit model of the Citroen Traction 11CV. •The elegant form of the body and fenders has been accurately reproduced. •For easy assembly of the suspension, the number of parts is kept in check. •You can choose to assemble either open or closed front doors. •By assembling open front doors, you can enjoy viewing the the highly detailed interior. •Set includes one driver figure. •Markings for the German Army x 2, French Army x 1, and Civilian vehicle x 1 are included.(Total 4) •This model will look great in a diorama on its own or with other 1/35 scale models. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Fren. Leclerc Series 2
300035362€64.99
Article number: 300035362 Product: 1:35 Fren. Leclerc Series 2 • This is a 1/35 scale plastic model assembly kit. Length: 306mm. • Road wheels now come as molded plastic components. Please note that other parts are features remain the same as on Item 35279, except for slightly updated instructions and package. • The Leclerc is captured with exceptional detail, including Series 2 specific smoke dischargers, stowage boxes, short and long snorkels, and air conditioning unit. • French developed 120mm smoothbore gun with thermal sleeve is accurately reproduced. • Clear parts recreate headlights, taillights and periscope lenses. • Rear hull includes finely detailed engine grille and surface imperfections reproducing the non-slip finish of the actual tank. Other details include tow cable, external fuel tank, fuel tank pipe stay and fuel tank stays. • Commander's post features rotating sight and a commander figure. • Features 4 marking options, three in the 3-color NATO camouflage, and one in desert colors. See next page. • Compatible with Item 35280, a dedicated photo-etched parts set for the Tamiya 1/35 Leclerc Series 2. With 4 marking options included (these are unchanged from those in Item 35279): Option A: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 3/6 Squadron, France 2004 Option B: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, Rapid Reaction Platoon, France 2004 Option C: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 1/12 Squadron, France 2004 Option D: Technical Section of the French Armée de Terre (Army), Qatar 1998
Military model vehicles 1:35
1:35 Fren. Tank R35
300035373€31.49
Article number: 300035373 Product: 1:35 Fren. Tank R35 Length: 114mm. A Doughty Light Tank By the 1930s French military planners could no longer ignore the obsolescence of their masterpiece FT17 tank from late WWI, and work started on a genuine successor to fill the void. One of the answers they came up with was the R35 light tank, which utilized rolled steel lower and three-piece cast upper hull designs and was armed with the short barreled 37mm gun. It was crewed by two. When hostilities with Nazi Germany burst into life in May 1940 the R35 was right in the front line. While it showed its armor was reliable, the 37mm gun was inadequate when it came to taking out German armor. The Fall of France in June 1940 meant that production of the R35 was curtailed to approximately 1,600 units. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 114mm, width: 55mm. ★The R35 form with distinctive rounded hull and complex turret is accurately depicted. ★Turret utilizes slide molding for superior authenticity and a fulfiling build. ★Realistic gun elevation and traverse ranges add to the realism. ★Assembly type tracks feature one-piece straight sections for realistic depiction of upper run 'sag.' ★A single commander figure is included for installation upon the turret rear hatch. ★Comes with two early WWII marking options.
Military model vehicles 1:35
1:35 French MBT B1 bis (1)
300035282€82.99
Article number: 300035282 Product: 1:35 WWII French MBT B1 bis (1) Defender of the Republic In May 1940, B1 bis tanks stood in the way of German armies determined to strike a crushing against France on her own soil. Introduced as an upgraded version of the original Char B1, which was developed in the nineteen twenties, the B1 bis entered production in 1937. The rivet-joined hull mounted a short-barreled 75mm howitzer, while a small, one-man turret carried a longer-barreled 47mm tank gun. The B1 bis was one of the most heavily armored tanks of its time, with plating that was 60mm thick in places, more than capable of defending against anti-tank fire such as that from 37mm Pak guns. The B1 bis could more than hold its own against individual German tanks, and was greatly feared by enemy soldiers who encountered it. About the Model ★1/35 scale assembly model of the French B1 bis ★Realistically depicts tank's tall profile, 75mm gun and side armor panels covering suspension mechanisms. ★Hull parts are made using slide molding and feature accurately depicted hex bolts. ★Newly-designed track parts require no cement to assemble and snap together easily by hand. ★Commander's and driver's periscopes are moveable, as is the 75mm main gun. ★Choice of two types of fenders and exhausts, combined with 4 sets of markings allows construction of each possible combination. ★Includes realistic metal tow-chain, and 1 tank commander figure. ★Comes with colorful painting guide and four types of marking decals. ★Reverse side of painting guide features an exciting article about the exploits of B1 bis tanks facing German Panzers Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 French Med. Tank SOMUA S35
300035344€55.99
Article number: 300035344 Product: 1:35 French Med. Tank SOMUA S35 The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Length 153 mm.
Military model vehicles 1:35
1:35 Ger. Floating Car Typ 166 (1)
300035224€18.99
Article number: 300035224 Product: 1:35 Ger. Floating Car Typ 166 (1) This is a plastic assembly model kit of the 4WD Schwimmwagen which earned the trust of German soldiers with excellent performance on bad roads and fording ability. The body with hull-shaped underside has been reproduced via slide molding for a realistic finish and ease of assembly. The windshield is moveable and the screw can be positioned in the down position to allow you to depict a fording scene. Parts to depict the air-cooled four-cylinder engine also included. Interior details such as the flooring & seats, instrument panel, shift lever etc have a rich finish. The folded canvas roof cover also provides the model with great realism. A driver figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Kübelwagen T82 Africa (1)
300035238€19.49
Article number: 300035238 Product: 1:35 Ger. Kübelwagen T82 Africa (1) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. The car's interior and under chassis area including the suspension arms and engine guard are realistically reproduced. A standing soldier figure wearing shorts and a short sleeved shirt included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Marder I Tank Destroyer
300035370€37.99
Article number: 300035370 Product: 1:35 Ger. Marder I Tank Destroyer This is the latest subject in the long-running Tamiya 1/35 Military Miniature Series. The Marder I was one of the early German efforts to update a military that – despite crushing early successes against Poland and the Allied early in WWII – was in sore need of mechanization. Based upon the French Lorraine supply tractor, it was one of a number of commandeered vehicles pressed into German service. Around 170 were produced from May 1942, and their 7.5cm Pak40 anti-tank gun was a threat to Allied AFVs in France post-Normandy landings, and also on the Eastern Front and even North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • Tamiya designers worked up close with a specimen in the Musée de Blindés, Saumur. The result is a highly accurate depiction of the compact chassis and bulging upper hull, complete with rivet and weld line details. • Interior features gun breech detail, sights, racks, radio equipment and more. • Assembly type tracks have single piece straight sections. • Bogies have an ergonomic parts breakdown. • Two figures are pictured looking to the skies, hinting at the breakdown of air control from their Luftwaffe after the Normandy landings. • Comes with three marking options, two from Normandy and one from the Eastern Front.
Military model vehicles 1:35
1:35 Ger. PzKpfw.VI Tiger I E Early (1)
300035216€46.99
Article number: 300035216 Product: 1:35 Ger. PzKpfw.VI Tiger I E Early (1) The Tiger I needs little introduction, this legendary 88mm gun-toting AFV being the subject of countless war tales. Early production versions of the Tiger I were rushed from the factories by the end of 1942, bound for the harsh realities of the Eastern Front and the conflict with Soviet Russia, as well as the sweltering climes of North Africa. This model recreates such an early production variant, from the weighty overall design down to parts such as the turret with circular cupola, smoke dischargers, and large pistol port. Hull details such as air cleaners are of course not missed out. The kit also includes six marking options and an authentic figure. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.139 Tank De.MarderIII(2)
300035248€45.99
Article number: 300035248 Product: 1:35 Ger. SdKfz.139 Tank De.MarderIII(2) About the Model ★1/35 scale plastic assembly model kit based on the German Tank Destroyer Marder III. ★Overall length: 174mm ★Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction. ★All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated. ★Protective armor and sighting equipment moves with raising and lowering of main gun. ★Crew seats and large clamp for main gun can be modeled in the fighting or moving positions. ★Two crew figures are included in set. Five kinds of battlefield markings are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2)
300035197€43.99
Article number: 300035197 Product: 1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2) During WWII, the German army used self-propelled guns in large quantities with one such gun being the German Sturmgeschutz III. This plastic assembly model kit realistically reproduces the form of the Ausf.G early version which was manufactured from December 1942. The distinctive low silhouette of the StuG III, with the fighting compartment mounted onto the Panzer III's hull, features great scale realism. The kit also includes parts to allow you to depict the StuG III with either a 7.5cm anti-tank howitzer or the 10.5cm gun used to support the infantry units. Parts to depict Schürzen armor as well as two figures in relaxed pose feeding and holding a puppy are also included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)
300035209€43.99
Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.
Military model vehicles 1:35
1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1)
300035170€43.99
Article number: 300035170 Product: 1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1) This is a 1/35 scale plastic assembly kit of the Panther tank, which was deployed from 1943 in order to counter the formidable Russian T-34. The kit depicts a Panther Ausf.G, a variant produced from March 1944 which followed the earlier Ausf.D and Ausf.A. The long-barreled 75mm gun has been accurately reproduced and the escape hatch at the rear of the turret may be opened to view the gun breech even after completion. Other hatches on the model may be assembled in either open or closed positions. One tank crew figure and four markings options are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Königstiger Por-T(1)
300035169€47.99
Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3)
300035286€44.99
Article number: 300035286 Product: 1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3) About the Sd.Kfz.222 Among the many armored cars developed by Germany in WWII, the Sd.Kfz.222 is one of the most widely recognized. This light 4x4 vehicle had a distinctive hull shape thanks to its welded construction, and featured an open turret with mesh covers to protect the 3 crew members against grenades and shrapnel. It was armed with a 20mm cannon and 7.92mm machine gun and its exceptional off-road capability made it an excellent reconnaisance vehicle. About the Model •High-quality 1/35 scale assembly kit model of the Sd.Kfz.222 armored car. •Sharp, angular form of hull and turret accurately reproduced. •Open turret enables depiction of interior details such as the 20mm cannon, which features a metal barrel for enhanced realism. •Photo-etched parts for turret mesh covers included for even more detail. •Parts included for a DKW motorcycle and new parts such as hull-mounted tool box and headlight are also planned. •3 new figures are included in this kit: 1 commander and 1 radio operator located in the turret, and 1 motorcycle rider figure that can be modelled with different facial expressions and poses.
Military model vehicles 1:35
1:35 Ger. SdKfz.222 Light Arm. Vehic.(1)
300035270€32.99
Article number: 300035270 Product: 1/35 WWII SdKfz.222 Light Arm. Vehicle(1) German Armored Car Sd.Kfz.222 Throughout WWII, Germany carried out an extensive program of armored vehicle development, deploying a vast range of armored vehicles to the front line. Amongst these vehicles, the compact 4WD Sd.Kfz.222 remains one of the most famous and popular. Featuring welded plate armor particular to German vehicles at that time, the Sd.Kfz.222 was fitted with a rotating open top turret protected by grenade deflecting mesh screens. The 222 was equipped with an anti-tank and anti-aircraft 20mm main gun and a 7.92mm machine gun. Featuring a 4WD chassis with fully independent suspension and optional 4-wheel steering, it had a top speed of 90km/h. An exceptional off-road vehicle, the Sd.Kfz.222 was seen on all fronts throughout the middle phases of WWII. Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Photo- etched parts, Length 134 mm. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)
300035239€89.99
Article number: 300035239 Product: 1:35 Ger. SdKfz.9 Famo 18to Halftrack(8) Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the "Famo" In the wake of Blitzkrieg advances made by the Wehrmacht at the outbreak of WWII, the recovery of damaged or broken tanks from the battlefield proved relatively simple. After securing an area, reinforcing divisions could easily send inoperative vehicles back to the homeland for repair via railway. However, in the seesaw battles with the British Army in North Africa and against the Russian Army on the Russian front, the quick replenishment of tank strength became an indispensable element of Wehrmacht battle strategy. The utilization of the 18 ton Heavy Half-Track "Famo" proved fundamental to this strategy. The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops. About the Model ★1/35 plastic assembly kit of the largest half-track in the German Army. ★Overall Length: 243mm, Overall Width: 75mm. ★Highly detailed model captures the size and tank-towing power of the FAMO. ★Realistic treads and suspension. ★Synthetic rubber front tires and steerable front wheels for maximum realism. ★Rear gate and storage doors can be assembled in the open or closed position. ★Tank towing drawbar included. ★Can be assembled with or without engine side panels, revealing fully detailed engine. ★Engine can be assembled outside of FAMO. ★Eight figures (four variations) included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.9 Famo w/ Lowloader(12)
300035246€160.00
Article number: 300035246 Product: 1:35 Ger. SdKfz.9 Famo w/ Lowloader(12) About the Model ★After the impressive debut of the FAMO kit, Tamiya began to receive many requests for variations. Among the several types of FAMO to appear during WWII, the most frequently requested was the Sd.Ah.116 trailer-towing version. ★Stretching over 640mm, Tamiya's new beast-of-burden is 50mm longer than the Dragon Wagon and is the longest kit in the MM series. ★The massive trailer unit consists of both the front and the rear wheeled pieces on either ends of the long platform piece. ★Real rubber tires for heightened realism. ★This kit features ample metal and metal plated parts for various accessory pieces such as a chain for fixing the tank in tow to the platform. ★This kit brings back the eight figures of four poses included in the original "FAMO" kit, plus four all-new figures of three poses acting out a tank loading scene at the rear of the trailer. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Simca S5 Staff Car (1)
300035321€27.99
Article number: 300035321 Product: 1:35 Ger. Simca S5 Staff Car (1) The Simca 5 was a small passenger car which debuted in March 1936. It was almost identical to the Fiat 500 Topolino as the car was actually designed by Fiat. The car was equipped with an independent front suspension, a 4-speed transmission, hydraulically-controlled drum brakes, and a 12-volt electrical system. At the time, the car was meant to be affordable for the French public, in the same way that the later Volkswagen Beetle and Fiat 500 brought inexpensive private motoring to the masses in Germany and Italy respectively. It was also very fuel efficient. Many were in use by the time WWII began, and the German Army captured large numbers of them when they occupied France. These were pressed into military service as staff cars for transporting personnel and liaison duties. Over 46,000 Simca 5s were built by the time production ended in 1946. About the Item • 1/35 scale assembly kit model of the Simca 5 staff car. • The elegant silhouette of the car has been accurately reproduced. • Details such as front & rear suspension have been realistically depicted. • Doors can be depicted in either open or closed position. • Comes with a German Army driver figure as well as 3 marking options. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Israeli Tank M51 105mm
300035323€58.99
Article number: 300035323 Product: 1/35 Israeli Tank M51 105mm During the 1960's, the Israeli Ordnance Corps upgraded their M4A1 Sherman tanks by equipping them with the powerful French 105mm CN-105-F1 tank gun and they were redesignated as M51s. The larger gun meant a muzzle brake was installed to minimize the greater recoil effect and a counterweight was fitted to the rear of the turret. The 460hp diesel engine and the combination of the Horizontal Volute Spring Suspension (HVSS) and wider T80 tracks gave the M51 improved mobility. During the Six-Day War in 1967, the M51s were used against newer T-54/55 tanks as well as JS-3 tanks from Egyptian, Iraqi, and Syrian armies. The M51's 105mm gun could take on these adversaries by using HEAT ammunition. After the war, these M51s continued to serve with distinction until they were finally retired in the early 1980s. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ital. MTk. Carro Armato M13/40 (2)
300035296€47.99
Article number: 300035296 Product: 1:35 Ital. MTk. Carro Armato M13/40 (2) During WWII, the Italian army used the M13/40 as its main tank. It featured a riveted construction and bogey-style wheels on a leaf spring suspension with a 47mm main gun featuring on Italy's first ever hydraulically operated turret. In addition, the M13/40 was powered by a 125hp V8 liquid-cooled diesel engine which produced a top speed of 30km/h. From July 1940 through to 1943, approximately 800 units were produced. They fought mainly alongside the German African Corps at the North African front. This is a 1/35 scale plastic assembly kit model. - Length: 143mm. The unique riveted form of this tank is faithfully reproduced. - Easy to connect assembly type tracks included. The suspension features a highly realistic finish. - Metal parts for the gun barrel and photo-etched parts for the anti-aircraft gun sight etc are included. - Other highlights of this model are its range of tools and radiator cap. - A standing figure, a sitting tank crewman figure, 3 kinds of decals for the North African front, and a set of badges of rank are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Jap. Tank Type 1 w/6 Figures
300035331€40.99
Article number: 300035331 Product: 1:35 Jap. Panzer Type 1 mit 6 Figuren The Type 1 Self-Propelled Gun was produced from 1943, and around 140 were manufactured. Due to severe damage suffered during their transportation to the front line in the Phillipines, a large number of Type 1s never actually made it into battle, but those that did are said to have been rated highly by the opposing U.S. forces. About the Item • 1/35 scale plastic assembly kit model. • Length: 173 cm, Width: 67 cm. • This item features Item 35095 Japan Type 1 Self-Propelled Gun and Item 35090 Japanese Infantry Set. • The roofless fighting compartment and 75mm field gun are recreated in excellent detail. • In addition to gunner and loader figures from Item 35095, 4 soldier figures from Item 35090 are included. • Accessories such as armor-piercing and howitzer rounds are also reproduced in scale form. • Features belt-type tracks. • Includes insignia decals for figures. • Comes in a new packaging.
Military model vehicles 1:35
1:35 M561 6x6 Cargo Truck Gama Goat
300035330€36.99
Article number: 300035330 Product: 1:35 M561 Transport-Fahrzeug Gama Goat The M561 Gama Goat was seven years in development until production of the vehicle began in 1968. Its unique name was derived from the creator of its articulated joint, Roger Gamaunt, and its mountain goat-like climbing ability. It was unlike most other military off-road vehicles in that power could go to all 6 wheels of the vehicle, and its aforementioned articulated joint allowed 80° pitch and 60° roll ranges of the carrier module at the rear. Its excellent rough-terrain mobility was tempered somewhat by problems with tricky handling and maintenance, as well as its being rather noisy, but the Gama Goat continued in service until it was effectively replaced by the HMMWV in the late 1980s. About the Model • This is a 1/35 scale plastic model assembly kit. • Length: 170mm, Width: 62mm. • The articulation joint of the M561 is recreated faithfully, and the joint on the model uses a poly-cap to accurately mimic the movement range of the real vehicle. • The model features optional front windshield and front-mounted winch parts. • The complex 6-wheel drive suspension is recreated in a single molded part without sacrificing accuracy. • 1 driver figure is included. • Comes with 3 marking options. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Modern JGSDF Type 10 Tank
300035329€63.99
Article number: 300035329 Product: 1:35 Modern JGSDF Type 10 Tank The Type 10 is the Japan Ground Self Defense Force’s next generation main battle tank. Now, it joins its predecessors the Type 61, Type 74 and Type 90 in the Tamiya 1/35 Military Miniatures series. The Type 10 was first shown to the world in 2010 (that’s where the 10 in its name comes from), and was assigned to units starting in 2012. Among the many advances from the previous Type 90 model are a Japanese-made 120mm smoothbore main gun, and the so-called C4I system. This state-of-the-art computerized system allows the Type 10 to be connected to a computer network and share information with other tanks, enabling co-ordinated actions. About the Model • 1/35 scale plastic assembly kit • Features detailed and faithful replication of modular armor, as well as the 120 mm main gun. • Lower hull rubber skirts and belt-style tracks ensure the base of the model is also highly realistic. • Includes 2 figures to add to the realism of modelers’ dioramas. • Comes with 3 sets of markings. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Light Arm. Tank Greyhound (1)
300035228€35.99
Article number: 300035228 Product: 1:35 US Light Arm. Tank Greyhound (1) The WWII U.S. M8 Light Armored Car depicted by this plastic assembly model kit had a top speed of 88km/h and was often used in reconnaissance roles. Features of the M8 including its plane hull construction, open top turret, and the suspension of the 6-wheel drive have been precisely reproduced. The turret and interior feature a rich finish. It is possible to attach a ring mount and an M2 heavy machine gun onto the turret. Large left and right fenders can be removed after assembly and you can also choose to install racks and anti-tank mine tool boxes on both sides of the model. A figure is included. Warning! Not suitable for children under 14 years.