On-road RC cars (2WD/4WD)

On-road RC cars (2WD/4WD)

1:10 RC XM -01 Pro Chassis Kit

€294.99

Article number: 300058738 Product: 1:10 RC XM -01 Pro Chassis Kit This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection! Compatible Hop-Up Option Parts for XM-01 Chassis (NOT included!) 22046: XV-02/TT-02 Ball Differential Set (39T) 22047: XV-02/TT-02 Front Direct Coupling Set (39T) 22048: XV-02 Slipper Clutch Set 22049: XV-02/TT-02 Oil Gear Differential Unit 22050: 06 Module Spur Gear (70T) for XV-02 Gear Differential (Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit.) 22053: XV-02 Aluminum Spur Gear Holder 22055: XV-02 Aluminum Adjustable Suspension Mount (XH) 22056: XV-02 Aluminum Damper Stay Mount 22064: TT-02 Type-SRX Front Direct Cup Joints (Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) or Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T).) 22072: XV-02 Aluminum Steering Arms (L/R) 54802: TB-05 Aluminum Steering Bridge 54884: Aluminum Adjustable Separate Suspension Mounts (A) 4WD assembly kit, XM-01 Chassis, 3-different WB, Chassis-Cover, many Hop-Up parts included, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC XV-01 Lancia Delta HF Integrale

€284.99

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:14 RC Buggyra Fat Fox (TT-01E)

€179.99

Article number: 300058661 Product: 1:14 RC Buggyra Fat Fox (TT-01E) Here comes a new addition to the stable of racing trucks in the world of Tamiya R/C! This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. You’ll be able to have exciting truck races with your friends, just like the real ones thrilling fans on major circuits around Europe this summer! About the Model • This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm. • The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape. • Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper. • Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko. • Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.

On-road RC cars (2WD/4WD)

1:14 RC M-B Race Truck Actros MP4 TT-01E

€179.99

Article number: 300058683 Product: 1:14 RC M-B Race Truck Actros MP4 TT-01E The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm. • Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches. • The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler. • Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem. • Includes stickers recreating the sponsors and livery. • Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:14 RC Reinert Racing MAN TGS TT-01E

€179.99

Article number: 300058642 Product: 1:14 RC Reinert Racing MAN TGS TT-01E Following on from the success of the groundbreaking Team Hahn Racing MAN TGS model (Item 58632) last year, Tamiya announces the release of a new racing truck product on the TT-01 Type-E chassis. It recreates the #77 truck run by Team Reinert Racing in the 2016 running of the FIA European Truck Racing Championship. About the Model • This is a 1/14 scale R/C model assembly kit. • The form of the MAN TGS racing variant is captured accurately by a 4-piece durable and lightweight polycarbonate body. It includes depictions of details such as engine, turbocharger and frame. • Separately molded parts recreate side mirror, coupler and rear bumper. • Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck for the 2016 season. • Wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts to make the model compatible with LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

2003 Focus RS Custom (TT-02)

€149.99

Article number: 300058724 Product: 2003 Focus RS Custom (TT-02) Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

Mazda RX-7 (FD3S) Drift TT-02D

€254.99

Article number: 300058648 Product: Mazda RX-7 (FD3S) Drift TT-02D Tamiya continues to release models set up to enjoy the fun of drifting, and the latest features a modern classic: the Mazda RX-7 (which last appeared as Item 58388). The RX-7 is a favorite of sports car fans. The 3rd-generation (FD3S in Japan) RX-7 was released in October 1991 and boasted a stunning body with luxurious curves, not to mention a lightweight and extremely rigid chassis, plus a powerful trademark rotary engine.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Honda Bundle

Product bundle consisting of: 1:10 RC Honda NSX Racing Whi PB TT-02 / Tuning set TT-02 / 1:10 wheel set 14 Sp.Design (4) black Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.   Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set short (4), Ball bearing set (16)   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Mazda Bundle

Product bundle consisting of: Mazda RX-7 (FD3S) Drift TT-02D / 1:10 wheel set M-Design (4) white/black / 7,2V/1800mAh NiMH Race Battery TAM Article number: 300058648 Product: Mazda RX-7 (FD3S) Drift TT-02D Tamiya continues to release models set up to enjoy the fun of drifting, and the latest features a modern classic: the Mazda RX-7 (which last appeared as Item 58388). The RX-7 is a favorite of sports car fans. The 3rd-generation (FD3S in Japan) RX-7 was released in October 1991 and boasted a stunning body with luxurious curves, not to mention a lightweight and extremely rigid chassis, plus a powerful trademark rotary engine.   Article number: 500608221 Product: 7,2V/1800mAh NiMH Race Battery TAM Article number: 500608221 Product: 7,2V/1800mAh NiMH Race Battery TAM The 7.2 V nickel-metal hydride racing pack from Carson is suitable for use in RC vehicles, but also for other model building applications. It has a Tamiya connector system, can be charged quickly and can be discharged with high currents.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1991 Audi V8 Touring (TT-02)

soon available again

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Lancia Delta HF Integrale TT-02

soon available again

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Peugeot 306 Maxi BT-01

soon available again

Here is another R/C kit paired with the 2WD BT-01 chassis which offers choices of FF/MR/FR drive system; this time, a standard wheelbase, front motor / front wheel drive (FF) setup with the body which recreates the Peugeot 306 Maxi. Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally-aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally in Monte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche Carrera RSR 2.8 BT-01

available from May

Article number: 300058740 Product: 1:10 RC Porsche Carrera RSR 2.8 BT-01 The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

soon available again

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TA08 PRO Chassis Kit

soon available again

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02 Type-SRX Chassis Kit

soon available again

Article number: 300058710 Product: 1:10 RC TT-02 Type-SRX Chassis Kit Tamiya is proud to welcome a new addition – TT-02 Type-SRX Chassis Kit - to the TT-02 Type-S Series which is popular among both beginners and race users. The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit are chosen (more cost-effective than buying each part) for users who want to learn setup before levelling up to middle class chassis. Included Hop-up Option Parts: Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) Included: 4WD assembly Kit, TT-02 Chassis, fully ball bearings, 540er Torque-Tuned Motor, Option parts, Shaft driven, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TT-02D Drift Spec Chassis

soon available again

Article number: 300058584 Product: 1:10 RC TT-02D Drift Spec Chassis The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine. Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving. Includes full ball bearings and CVA (oil-filled) Super Mini shocks. Tamiya Sport-Tuned Motor and Aluminum heat sink is included. Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts. The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios. The skid-shaped underside of the bathtub type frame minimizes contact with the road surface. Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC VW Type 2 (T1) (M-06)

soon available again

Article number: 300058668 Product: 1:10 RC VW Type 2 (T1) (M-06) This new R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic drive just like the real RR Type 2 T1. About the Model • This is a 1/10 scale R/C model assembly kit. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate, with separate molded plastic parts included to create bumper, light cases and side mirrors. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Stylish metal-plated dish type wheels make for a great look. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs.

On-road RC cars (2WD/4WD)

Tamiya RC Audi Bundle

soon available again

Product bundle consisting of: Audi A4 quattro Touring TT01E / Reflex Wheel Start 2.4G Radio gray / CS-5 Servo 5kg/JR / PS-12 Silver Polycarbonate 100ml / PS-31 Clear Smoke Polycarbonate 100ml Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit.    Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and    no.45 cars (they raced in different touring car series), with    masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy    handling, and great customizability. • A wide range of option parts is available to tune the TT-01    Type-E chassis.   Article number: 500502016 Product: CS-5 Servo 5kg/JR Operation voltage: 4,8-6 V Torque: 50 Ncm Speed: 0,17 sec./60° Size: 38,5 x 19 x 32 mm Weight: 39 g Connector-system: Graupner/JR   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom.155 V6 TI Martini TT-02

available in stores

Article number: 300058606 Product: 1:10 RC Alfa Rom.155 V6 TI Martini TT-02 Tamiya welcomes a further limited edition re-issue of the Alfa Romeo 155 V6 TI Martini (TT-02) - the latest production was in 2016. This R/C model assembly kit recreates the racy Martini sponsored Alfa Romeo 155 V6 TI, which featured a purpose-developed 450hp-plus 2.5-liter V6 engine mounted in the front, and paired with a 6-speed semi-automatic transmission. A hi-tech flavor was added by electronically controlled front, central and rear diffs, traction control and ABS. It remained in contention for the prestigious 1996 International Touring Car title until the final race. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque-Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Citroen 2CV Rally (M-05Ra)

available in stores

Article number: 300058670 Product: 1:10 RC Citroen 2CV Rally (M-05Ra) Tamiya is delighted to announce this new rally version kit of that legendary motoring icon, the Citroën 2CV. The kit features a highly realistic recreation of the body, modified for rally races, and based upon a dedicated rally chassis in the form of the M-05Ra.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Mexico '04 (TT-01E)

available in stores

Article number: 300047372 Product: 1:10 RC Impreza Mexico '04 (TT-01E) This is a re-issue for the classic Subaru rally body and TT-01 Type-E chassis combination, last produced in 2018! The WRC 2004 rally season saw major rule changes governing aspects such as body design, engine, suspension and more; Subaru would narrowly miss out on the Drivers’ Championship, with star driver Petter Solberg finishing in second to Sébastien Loeb. In the Rally Mexico, third race of the calendar, Solberg set fastest times on 9 of 15 stages but a 5’40" penalty would push him back to an eventual 4th place finish. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 441mm, width: 185mm. • The Impreza from the 2004 Rally Mexico is expertly depicted in durable polycarbonate, with separate molded mirror and wing parts. • Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc. • Dish wheels are molded in gold, and paired with tread pattern racing radial tires. • The TT-01 Type-E chassis features a shaft-driven 4WD system to offer easy handling and great customizability. • A wide range of Hop-Up Options is available to tune the TT-01 Type-E chassis. • Click here to see the item on the official Tamiya homepage.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC NSU TT Jager (M-05)

available in stores

Article number: 300058649 Product: 1:10 RC NSU TT Jager (M-05) West German manufacturer NSU's Prinz was a highly popular compact car, produced between 1958 and 1973. This model recreates the Jägermeister-sponsored edition of the NSU TT, a race-oriented variant of the Prinz, of which almost 2,500 examples were built in the late 1960s and early 1970s. It was powered by a variety of inline-4 engines depending upon the spec. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 393mm. • The form of the NSU TT Jägermeister is recreated faithfully in polycarbonate. • The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. • This model uses the 239mm L wheelbase. • Gold color multi-spoke wheels are those seen on Item 47308, paired with M-Chassis slick tires. • Comes with marking stickers, plus masking stickers for use when painting the body. • The popular M-05 has a wide range of Hop-Up Option parts available to tune the chassis.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 956 Racing

available in stores

Article number: 300047508 Product: 1:10 RC Porsche 956 Racing Here is another Porsche R/C model assembly kit! The Porsche 956 is a sports prototype car which was developed along with the start of Group C regulations for the World Endurance Championship in 1982. In the same year, it achieved both Manufacturer’s and Driver’s Championships. This assembly kit recreates the Le Mans version of the 1983 works Porsche 956 which got victory at all seven races. (Please note some markings have been changed.) 2WD assembly kit, Gr.C Chassis, 540 Sport Tuned Motor, clear Polycarbonat-body, foam tires, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TA08R Chassis Kit

available in stores

Article number: 300047498 Product: 1:10 RC TA08R Chassis Kit Enter a new top model in the TA08 chassis range: the TA08R takes the 2-belt driven 4WD TA08 PRO chassis (Item 58693) and loads it with a wealth of Hop-Up Options and even more some dedicated parts for great performance and drivability. Included Hop-Op Option parts: 51565: TRF419 Gear Differential Unit Aluminum Diff Joint (2pcs.) 22004: TA08 Aluminum Servo Mount 22005: TA08 Carbon Damper Stays (Front & Rear) 22016: TA08 Low Friction King Pin Balls (4pcs.) 42319: Lightweight Cross Joints for Double Cardan Joint Shafts (4pcs.) 42320: Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.) 42346: TRF420 Wheel Axles (2pcs.) 42351: TRF420 Center Pulley 42357: Cross Joints for Low Friction Assembly Universal Shafts 42359: VG O-Rings for Oil Dampers (30°) 42361: 43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.) 42363: Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.) 42374: VG O-Rings for Gear Differentials (40°) 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) 53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.) 53969: 5x8mm Hard Hex Head Ball Head Connector (5pcs.) 54121: Aluminum Horn for High Torque Servo Saver 54642: 4mm Flange Lock Nut (Black, 8pcs.) 51647: TRF420 Aluminum Front Direct Cups (2pcs.) 54704: TA07 Aluminum Steering Arm Set 54881: Aluminum Adjustable Suspension Mount (A) 54883: Aluminum Adjustable Separate Suspension Mounts (XB) 54884: Aluminum Adjustable Separate Suspension Mounts (A) 54949: TA07 Adjustable Ackerman Set 4WD assembly kit, TA-08 Chassis with Option parts, 2-belt driven, Carbon Parts, including assembly guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TRF421 Chassis Kit

available in stores

Article number: 300042384 Product: 1:10 RC TRF421 Chassis Kit The TRF series welcomes the brand new TRF421 chassis kit. This R/C model assembly kit creates a 2 beltdriven 4WD, carbon fiber double-deck chassis. New features - such as updated drivetrain, lower deck featuring new shape, updated (one-piece or two-piece) upper deck, front and rear A-shaped upper suspension arms, adjustable front and rear caster angles, and shorter dampers - will surely provide superior performance. TRF421 Racing Chassis kit, 4WD, Carbon and Aluminium parts, A-Shape Arms, 2 Upper decks,incl. Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Mitsubishi Pajero (CW-01)

available in stores

Article number: 300058727 Product: 1:10 RC Mitsubishi Pajero CW-01 Tamiya is proud to release the 1/10 R/C Mitsubishi Pajero on the CW-01 chassis. After the announcement of its concept car at the Tokyo Motor Show in 1973, the Mitsubishi Pajero was one of the most recognizable Mitsubishi 4WD cars, sold from 1982 to 2021 through a fourth model change. At the 1983 Paris-Dakar Rally, this car took a championship in an unmodified production vehicle division, and after that, showed off its great performance around the world. This kit recreates the first generation model which was produced from 1982 to 1990. Based upon Item 58499 1/10 R/C Mitsubishi Montero Wheelie, tires are changed from massive 115mm big ones to rock block ones, and the kit features the CVA II short oil dampers. 2WD assembly kit, CW-01 Chassis, ESC included, Type 540 Motor, ABS Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Porsche 911 GT3 CUP08 (TT-01E)

available in stores

Article number: 300047429 Product: Porsche 911 GT3 CUP08 (TT-01E) Tamiya is delighted to announce this product, which sees the stylish Porsche 911 GT3 Cup VIP 2008 body released in an assembly kit for the first time! (It was previously released as an XB model – Item 84059.) The body depicts a car from the one-make Porsche Supercup series in 2008. The model is based upon the proven shaft-driven 4WD chassis TT-01 Type-E. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 195mm, height: 134mm. • The elegant 911 form is captured accurately in polycarbonate. Front and rear light cases are compatible with separately sold LEDs for a lit-up model. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate a range of markings and logos. • Stylish wheels are molded in Silver, and paired with slick tires. • This model runs on the short wheelbase (251mm) version of the TT-01 Type-E chassis, which features shaftdriven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.

On-road RC cars (2WD/4WD)

XV-02RS PRO Chassis

available in stores

Article number: 300058726 Product: 1:10 RC XV-02RS Pro Chassis Kit Tamiya is delighted to announce this shaft-driven 4WD touring chassis kit - based upon Item 58707 XV-02 PRO Chassis Kit – in the XV chassis series; this time the kit is mainly oriented for on-road, and features updates such as dedicated 3.5mm thick carbon fiber damper stays, aluminum-cylinder oil dampers employing shaft length suited for on-road performance, and carbon fiber-reinforced rigid lower deck. Included: 4WD assembly Kit, XV-02 Chassis, Shaft Driven, universal drive shafts Aluminium Oil filled shocks, On-Road Version, different Diffs included WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.