Model kit accessories
Discover our extensive range of model kit accessories: from adhesives and masking tape to precision tools and sanding materials. You'll find everything you require for your perfect modelling project here: browse through our categories and find the right accessories! Find out more with just one click.
Model-making abrasive material
#1500 Sanding Cloth, model hobby sanding sheet
300087233€4.69
This #1500 sanding cloth brings controlled surface refinement to model hobby work with a fine abrasive grade and a soft sheet format. The 170 x 130 mm sheet sits comfortably in the hand and reaches flat panels, edges and smaller shaped sections where a rigid abrasive can feel less forgiving. The cloth can be used for both dry and wet sanding, making it easy to match different finishing steps and material needs. The #1500 grit is part of a 5-grade range that also includes #600, #1000, #2000 and #3000, with the number indicating the grit level. Its soft construction develops limited fold lines, a useful detail when working across visible surfaces where deeper scratch marks can interrupt the next coat or polishing stage. One sheet is included. On the bench, it suits careful smoothing between shaping, priming and finishing steps on model hobby projects. The flexible sheet format also makes it easier to wrap around contours or guide across narrow areas with steady pressure when a clean, even surface matters. Warning! Not suitable for children under 14 years.
Model-making abrasive material
1500 Sanding Sponge Sheet, model finishing abrasive
300087150€6.19
The 1500 Sanding Sponge Sheet brings fine surface finishing to model work with a flexible abrasive layer bonded to a cushioned backing. That combination helps the sheet sit against curves, edges and narrow parts with steadier contact than a rigid sanding surface, making it useful for refining small components by hand. The 1500 grit is suited to light finishing passes where surface texture needs to be reduced without removing too much material at once. The sponge base can be cut into smaller pieces for targeted work on tubes, rods and other shaped sections, and the sheet format leaves room to prepare custom sizes for different stages of a build. Used dry by hand, it supports controlled smoothing on detail areas, cleanup around joins and preparation before the next finishing step. On the workbench, the sheet fits the kind of close, careful handling used on scale parts, body details and other small sections that need a softer touch. It also works well when a narrow strip or small pad is needed to reach contours that are awkward for a standard flat abrasive sheet. Warning! Not suitable for children under 14 years.
Model-making masking tapes
1mm Masking Tape, model masking tape, 18m roll
300087206€5.791 m = €0.32
This 1 mm masking tape is made for modelling work that calls for narrow, accurate paint separation. The thin tape format follows fine contours and small sections closely, helping create sharp lines on painted and unpainted scale models. Its strong adhesive backing holds well even on uneven surfaces, which is useful around raised details, edges and shaped body sections where wider masking material can be harder to place cleanly. The tape is designed not to absorb paint colour and not to leave unsightly marks, so the masked edge stays defined and the finished surface keeps a cleaner look after removal. With a roll length of 18 m, there is enough material on hand for repeated striping, trim work and detail masking across longer build and finishing projects. The narrow 1 mm width suits fine borders, accent lines and small-area coverage on scale plastic models and radio control models. It fits naturally into paint preparation, body finishing and detail work, whether the task is isolating a slim section before spraying or protecting an adjacent painted area during careful touch-up work.
Model-making abrasive material
2000 Sanding Sponge Sheet, model finishing sheet
300087170€6.19
The 2000 Sanding Sponge Sheet combines a fine aluminum oxide abrasive with a 5 mm flexible sponge base, giving model finishing work a controlled feel on shaped parts and delicate surface areas. On plastic models, the sheet is suited to removing small protrusions while keeping contact more even across contours, where a rigid abrasive can skip or dig in. Its flexible backing bends around curved surfaces and settles into harder-to-reach corners, which helps when refining sculpted folds, rounded panels or tight edges. The 114 x 140 mm format leaves enough area for broad passes, yet the sheet can also be cut with a modeling knife into smaller sections for narrow parts, touch-up work or repeated use at the bench. Wet sanding compatibility adds another handling option when a cleaner sanding process or a finer finish is needed. Beyond plastic models, the same sheet can be used on wood and metal finishing materials, which makes it useful across different stages of a build or restoration project. It fits naturally into surface preparation before primer, smoothing after seam cleanup, and final refinement before paint or detail finishing, especially where curved shapes call for a sanding surface that can flex with the part. Warning! Not suitable for children under 14 years.
Model-making masking tapes
2mm Masking Tape, model supply, 18m adhesive roll
300087207€5.791 m = €0.32
This 2 mm masking tape brings fine control to model painting where narrow lines and tidy colour separation matter. The thin tape format follows edges closely and helps create sharp, crisp borders on painted surfaces, whether the task is outlining trim, isolating small sections or protecting adjacent areas during finishing work. Its adhesive layer is designed for modelling use and holds well even on uneven surfaces, which is useful around contours, panel shapes and small raised details. The tape also resists absorbing paint colour, helping maintain a clean barrier while work is in progress. That combination supports accurate masking on both unpainted parts and already finished sections where neat transitions are needed. The translucent amber roll format also makes it easier to place short lengths with visual control during detailed work. With 18 m on the roll, the tape suits repeated use across multiple sessions at the bench, from body detailing on radio control models to careful paint separation on scale plastic builds. It can be applied for narrow stripes, edge definition and small-area masking wherever a broader tape would cover too much surface.
Model-making abrasive material
3000 Sanding Sponge Sheet, model sanding sheet
300087171€6.19
The 3000 Sanding Sponge Sheet brings controlled finishing to model work with a flexible sponge base and an aluminum oxide abrasive surface. Sized at 114 x 140 mm with a 5 mm sponge thickness, it adapts to shaped parts while keeping a broad working area for steady, even passes across detailed surfaces. Its fine 3000 grit suits light refining work where raised spots, small imperfections and transition areas need a smoother finish before the next stage. The sponge base bends into curved sections and reaches corners that are awkward with a rigid sanding block, which helps when working on body lines, clothing folds or other sculpted details. Because the sheet can be cut with a modeling knife, smaller sections can be prepared for narrow parts or confined areas instead of using the full sheet each time. Wet sanding use adds another practical option for controlled finishing on plastic models, and the abrasive surface is also stated for wood and metal materials. On the bench, the sheet supports careful cleanup after assembly, surface preparation before paint, and final touch-up work on shaped components. Cut sections can be kept beside files, knives and other finishing tools for repeated detail work on corners, edges and curved forms. Warning! Not suitable for children under 14 years.
Model-making tools
40ml Square Bottle Holder, model accessory, 80x80mm
300087202€3.89
This 40 ml Square Bottle Holder adds a simple layer of control to model-building work by surrounding a square bottle with a PE sponge frame sized at 80 x 80 x 12 mm. The snug fit helps limit tipping if the bottle is knocked during cement application, keeping the work area steadier while parts, tools and materials are spread across the bench. The holder is intended for the 40 ml square bottles used for modeling cement and similar aids, so the bottle sits within a cutout rather than balancing on its own base. That extra support matters most during close brush work, when a hand, sleeve or tool can catch the bottle edge. The PE sponge material keeps the format light and easy to place, and the single-holder design makes it easy to position one bottle exactly where the current build needs it. An included tab also allows multiple holders to be linked together for a more ordered arrangement of bench liquids. On a busy workbench, the holder helps separate cement from painted parts, decals and unfinished assemblies by giving the bottle a defined place. It also suits longer building sessions where the same adhesive is picked up and set down repeatedly, keeping the bottle stable and close to the active work area.
Model-making tools
A3 Cutting Mat, hobby work surface, 450 x 320 mm
300074076€27.49
This A3 cutting mat creates a clean, measured work zone for model building and paper craft, with a 450 x 320 mm surface that sits slightly larger than A3 paper. The green 2 mm mat gives knives and similar tools a dedicated base while helping keep the desk underneath clear during trimming, marking and layout work. Its 3-layer structure combines a harder inner layer with softer outer layers. That construction is designed so cut ends remain less conspicuous, and it also helps the blade stay sharp for longer during repeated use. The front side is printed with a dense set of practical guides, including grids, angled lines, R curves and circular lines. These markings support alignment, spacing and repeatable shapes when preparing sheet material, planning cuts or checking symmetry on small parts. The reverse side uses a plain solid color, which changes the mat from a measured cutting surface into a simpler backing for other bench tasks. On a hobby desk, that makes it easy to move between precise knife work, template placement and general craft handling without changing the work area. The format suits model supplies, paper sheets and other flat materials that benefit from a stable, clearly defined surface.
Model-making tools
A4 Cutting Mat, hobby craft mat, 320 x 225 mm
300074118€16.79
This A4 cutting mat brings a measured, stable work surface to model making and paper craft, with a 320 x 225 x 2 mm format that sits neatly on the bench while still extending slightly beyond standard A4 paper. The green surface carries printed reference markings that keep trimming, alignment and layout work clear at a glance. The front side combines a 1 cm grid, 10-degree angle guides, a 1 mm step ruler, curved markings and circular references, giving one surface for straight cuts, angled lines and repeated shape work. A 3-ply structure places a hard inner layer between softer outer layers, a construction designed to leave cut traces less conspicuous and help preserve blade sharpness over longer use. The reverse side is plain, so the mat can be turned over when a clean surface suits the task better. The printed markings are intended as guides, and precise measurement work should still be checked with dedicated measuring tools. On the bench, the mat supports jobs such as trimming sheet material, cutting paper patterns, preparing masking shapes and setting out small model parts before assembly. It should be stored flat and kept away from high temperatures to help prevent warping over time.
Other accessories
Anaerobic Gel Thread Lock, model adhesive, red 1g
300054032€8.29
Anaerobic Gel Thread Lock is a model adhesive designed to help keep threaded metal parts from working loose during R/C use. The red gel format supports controlled placement on screw threads, so the compound stays where it is needed on small fasteners in vehicles, chassis sections and engine-related assemblies. The 1 g container is sized for precise hobby maintenance rather than broad surface bonding. Its anaerobic formula is intended for threaded connections, where it works within the joint instead of acting like a general-purpose glue across exposed surfaces. That makes it useful for screws and other metal fittings that face repeated vibration, regular handling and ongoing setup changes. The compact jar format also keeps the compound close at hand on a workbench for quick application during servicing. In practical use, a small amount can be placed on the thread before fastening a metal part into position on an R/C chassis or engine assembly. It suits routine maintenance sessions, rebuilds after running, and fresh installations where a more secure threaded hold is needed on metal hardware.
Model-making tools
Angled Round Tip Tweezers, Craft Tool, Steel
300074108€18.49
These angled round tip tweezers bring clear sightlines and controlled handling to close-detail work. The bent tip profile helps approach small parts from the side instead of directly above, which can make placement easier when working in confined areas or around raised details. The steel body gives the tool a precise, clean feel, while the broad flat grip section supports stable finger placement during slow, exact movements. The round tip form is suited to delicate handling where a sharp point would be too aggressive, making it useful for lifting, turning or settling fine materials into place. In model making, the angled shape can help when positioning markings, adjusting miniature components or guiding small pieces into narrow openings. The slim profile also suits electronics handling and other bench tasks that call for careful control over tiny parts. On a hobby desk, these tweezers fit naturally alongside assembly, finishing and detail correction work. They support steady placement during miniature builds, careful repositioning during surface detailing, and neat handling whenever fingertips are too large for the job. Warning! Not suitable for children under 14 years.
Model-making tools
Angled Tweezers, model tool, stainless steel
300174003€12.99
These angled tweezers bring precise control to close-up model work, with bent fine tips that make it easier to reach small parts and place decals where a straight tool can get in the way. The angled form keeps the working point visible during careful positioning, which helps when aligning tiny pieces on detailed builds. The tweezers are made from stainless steel and finished with a black cationic coating. This combination gives the tool a clean, technical look while supporting long-term workshop use. Rounded edges are designed to prevent scratching, an important detail when working near painted surfaces, clear parts or freshly applied markings. The slim body suits delicate handling tasks such as lifting, turning and adjusting small components during assembly or finishing. On the bench, the tool fits naturally into decal application, part placement and other fine correction work that calls for a steady grip and a narrow contact point. It also works well as a dedicated craft tool kept alongside knives, files and cutters for repeated detail sessions on scale models. Warning! Not suitable for children under 14 years.
Other accessories
Anti-Slip Sticker, model supply, 75 x 150 mm
300087227€4.19
This anti-slip sticker sheet adds controlled grip exactly where small parts, tools and work surfaces tend to shift. The 75 x 150 mm size gives enough area for display bases, rulers, mats or custom cut sections, while the synthetic rubber face creates traction and the acrylic adhesive underside holds the sheet securely after placement. At about 0.4 mm thick excluding the backing film, the material stays slim enough for close contact on precision tools and flat working areas. The polyester cloth base supports the sheet structure while keeping it flexible enough to adapt to different applications. On metal rulers and cutting mats, the added grip helps keep the contact area steadier during cutting work. Applied to tweezer tips, the surface helps hold small parts more securely. Two sheets can also be combined to create a double-sided anti-slip layer for custom workshop setups. The sheet also suits bench and display use where movement needs to be reduced without adding bulky pads. It can be placed under finishing abrasives so the abrasive stays put while a part is moved back and forth across the surface, supporting cleaner, more controlled filing and sanding work. Warning! Not suitable for children under 14 years.
Model-making tools
Basic Drill Set, model tool, 1.0 to 3.0 mm
300074049€17.99
The Basic Drill Set brings 5 drill sizes into one compact model tool set, covering 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm for precise hole work across a wide range of hobby tasks. This spread gives a practical progression from fine starter holes to larger openings when parts need a broader pass. Each diameter serves a distinct role during model preparation and finishing. Smaller bits can be used where narrow openings or careful pilot points are needed, while the larger sizes support follow-up drilling when fittings, posts or mounting points call for more space. Keeping these 5 sizes together makes it easier to select the required diameter for the next step instead of working around a single fixed size. The set format also keeps the focus on measured, deliberate drilling rather than improvised tool choices. On the bench, the range suits routine workshop jobs such as preparing parts, adjusting openings and refining fit before final joining. It also works well for hobby sessions that move between delicate detail work and broader drilling tasks, with each bit size ready for the specific opening required.
Model-making tools
Basic File Set (3), modeling tool set, 16 cm
300074046€10.79
The Basic File Set (3) brings 3 distinct file shapes into one compact modeling tool set for controlled shaping, smoothing and edge work. Flat, round and half-round profiles make it easier to match the filing surface to the part being worked, whether the task involves straight edges, drilled openings or curved contours. Each file measures about 16 cm in length, giving a hand-friendly format for bench work where smaller parts and tighter areas need steady control. The set is specially developed for modeling use, with double-cut surfaces that support material removal on plastic and soft metals. That combination suits cleanup after cutting, refining contact points, easing tight fits and smoothing visible areas before the next build step. On a workbench, the flat file can true edges and level small surfaces, while the round file reaches into holes and narrow recesses. The half-round profile helps follow curved sections where a flat face alone cannot sit cleanly. Black handles support a firm grip through repeated strokes, keeping the focus on accurate hand finishing across hobby, craft and model-building tasks. Warning! Not suitable for children under 14 years.
Model-making tools
Bending Plier for Photo Etched Craft Tool
300074067€34.49
The Bending Plier for Photo Etched is made for the precise shaping work that gives scale builds a cleaner, more refined finish. Its long, narrow metal jaws reach small tabs and edges on photo-etched parts, making controlled bends easier when working with thin stainless metal components that demand a steadier touch than standard molded parts. A spring loop between the handles keeps the jaws open after each movement, so the plier is ready for the next adjustment without constant resetting. This helps when a part needs to be held, aligned and bent in short, careful steps. The curved black handles support a stable grip during close bench work, especially when handling tiny detail pieces where finger placement and pressure matter. In a photo-etched workflow, the plier covers the shaping stage after parts have been cut free and cleaned, giving fine metal additions their intended form before placement on the model. On the workbench, it suits tasks such as folding tabs, refining edges and positioning narrow stainless metal details before attachment. The compact, precision-led format also fits careful touch-up work on hard-to-reach areas where broader tools can get in the way. Warning! Not suitable for children under 14 years.
Model-making adhesive
Body Set R/C PC Reinf Mesh Tape, hobby tape
300054792€10.791 m = €5.40
This reinforcing mesh tape gives polycarbonate body shells a practical way to add support exactly where repeated impacts and flex can wear down vulnerable sections. Supplied as a 2 m roll with a 35 mm width, it suits targeted reinforcement on spoilers, fenders and similar areas inside an R/C body, where extra backing helps stressed sections stay usable for longer during regular running and repair work. The mesh format is the key to how it works. Instead of covering a large section with a rigid patch, the open structure can be positioned on the inside of the shell over the area that needs support. Clear silicone adhesive is required separately to fix the tape in place. That method makes it easier to reinforce curved contours and narrow sections without adding a bulky layer, which is especially useful around edges, bends and other high-strain points on lightweight polycarbonate shells. On the workbench, the roll format keeps material ready for quick trimming when a body picks up cracks, weak spots or stress around exposed sections. It also suits planned reinforcement before the next session, whether the focus is on spoiler edges, wheel arch areas or other parts of the shell that see frequent contact.
Model-making tools
Conical File 1.5-8 mm, hobby tool, #200 finish
300074164€24.49
This conical file is built for precise modification work on molded parts with holes, using a tapered filing surface to reach areas that flat tools cannot address cleanly. With an overall length of 150 mm, a 55 mm file section and a working diameter range from 1.5 mm to 8 mm, it supports controlled shaping of narrow openings, rounded cutouts and gradually widening holes on model parts. The #200 grade finish is tuned for fine adjustments rather than aggressive removal, making it useful when a part needs a cleaner edge, a more accurate opening or a smoother transition inside a curved recess. The conical form allows contact at different points along the taper, so the same tool can work near the tip for smaller openings or farther down the file for broader shaping. An embossed grip supports a secure hold while changing the filing angle across detailed surfaces. A transparent cover protects the filing section when the tool is stored in a drawer, toolbox or hobby case. On the workbench, this file suits careful fitting and cleanup on molded components that need subtle correction before final assembly or finishing. It is especially useful during test fitting, edge refinement and detail preparation where a gradual taper gives more control than a straight file.
Other accessories
Cotton Swab round extra small, hobby applicators
300087103€5.69
These round extra small cotton swabs are made for scale model work where control matters more than bulk coverage. Tightly spun cotton tips keep a cleaner shape during painting, decal application and panel lining, so small corrections and fine placement feel more deliberate at the workbench. Each swab uses an extra small head with an 8.5 mm tip length and a 2.2 mm diameter, which helps reach confined sections and narrow surface details without flooding the surrounding area. The industrial strength build is designed for hobby use rather than general household tasks, so the cotton resists fraying more effectively when wet or dipped in solvents. That makes them useful for subtle weathering, careful cleanup around markings and controlled application of finishing media on compact parts. The round tip shape also suits gentle blending and small circular motions where a pointed edge is not required. A pack of 50 supports repeated use across long build sessions, whether the task is settling decals onto body panels, refining panel lines or adding weathering to small areas such as Waterline series models. They also work well with Weathering Master Set colours when rust stains and other surface effects need a measured, local application. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round small, hobby applicator, 50 pcs
300087104€5.69
This pack of 50 small round cotton swabs is made for scale model work where clean application and control matter. The tightly spun cotton tips keep their form more reliably than common supermarket swabs, which helps when placing decals, refining panel lines or working paint into small sections. With a 3 mm tip width and a 12 mm tip length, the swab reaches confined areas while keeping contact focused. The industrial strength design is intended for hobby use, including work with wet media and solvents. Because the cotton frays less easily, the swab leaves less loose fibre behind during detail work and reduces wasted material. The round tip shape suits dabbing, blending and controlled transfer on model surfaces, especially where a brush may carry too much material at once. It also supports weathering effects in small zones, such as rust staining and subtle surface variation. On ship subjects, aircraft details or other compact assemblies, the slim double-ended format helps move from one section to the next without changing tools immediately. The swabs can also be used with Weathering Master Set colours when building up fine effects on corners, seams and other narrow points of the model. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab round, hobby applicator, 50 pieces
300087141€6.59
These round craft cotton swabs are made for scale model work where control at the tip matters. Each swab uses tightly spun cotton that keeps its shape more reliably during painting, decal application and surface detailing than loosely wound household alternatives. The pack contains 50 swabs, giving a practical bench supply for repeated finishing sessions. The round tip measures 12.5 mm in length and 3.5 mm in width, a format suited to broader contact on small model sections while still staying manageable around edges and recessed detail. When the tip is wet or dipped in solvents, the industrial strength construction helps it resist fraying, so the cotton stays more consistent during cleanup, blending and correction work. This makes the swabs useful not only for placing decals and working panel lines, but also for refining weathering effects and applying color from weathering sets to focused areas. On the workbench, the swabs fit naturally into the finishing stages of a build: smoothing decal edges, adjusting panel line application, lifting excess material or adding subtle rust and dirt effects. The round head shape also suits repeated passes over compact surfaces where a pointed tip would cover less area with each stroke. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.extra small, hobby applicators
300087105€6.69
These extra small Tria. cotton swabs are made for model finishing where a standard household swab can feel too soft or lose its form too quickly. The tightly spun triangular cotton tips create a more defined contact area for careful work on decals, panel lining and other small surface details, especially where edges and corners need a narrower touch. Each pack contains 50 swabs, and the double-ended format puts a working tip on both sides for repeated use across painting and weathering steps. The tip section measures 8 mm, with a slim 2.3 mm profile that suits compact parts and fine surface sections. Compared with loosely spun supermarket swabs, these industrial strength swabs are designed to fray less easily when wet or dipped in solvents, which helps keep the cotton shape more consistent during detailed bench work. They fit naturally into scale model routines, from pressing decals into recessed lines to applying weathering colors in small zones. On compact subjects such as Waterline series models, the triangular tip shape helps target tight areas where broader applicators can leave excess color or disturb nearby detail. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.medium 50-Piece Cleaning Set
300087107€5.69
The Cotton Swab Tria.medium pack brings a precise, workshop-ready format to detailed cleaning and careful surface work. With 50 swabs in the pack and a double-ended layout, each piece offers two usable cotton tips on a slim white stem, making it easy to keep work moving during maintenance, touch-up preparation or dust removal around small parts. Each cotton head measures 10.5 mm in length and 4.5 mm in width, giving this Tria.medium format a balanced size for controlled contact on narrow sections, edges and recessed areas. The cotton surface supports gentle handling on finished components where a firmer tool would be less suitable. The medium tip size also suits jobs that need more coverage than a very fine point while still staying focused on small zones rather than broad wiping. On a hobby bench, these swabs fit naturally into routine care for models, tools and display pieces. They can be kept close at hand for cleaning sessions, detail work between build stages or careful upkeep of visible surfaces where neat, measured application matters. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Tria.small, hobby tool, 50 pieces
300087106€5.69
The Cotton Swab Tria.small is a compact hobby tool for precise cleanup and controlled application work. Each swab uses a narrow cotton tip measuring 10.5 mm in length and 3 mm in width, a format that helps reach confined sections where a broader tip would cover too much area. The slim white stick carries cotton on both ends, giving 2 working tips per swab and 100 usable ends across the 50-piece pack. This layout supports short, exact motions when handling small amounts of material, lifting residue from edges or working around recessed details. The tria.small designation points to a compact tip profile, making the swabs especially suited to fine-scale maintenance and finishing tasks where contact needs to stay localized. On a workbench, the narrow tip can be used for careful touch-up preparation, gentle surface cleaning or controlled work around corners and small openings. In model building and finishing routines, the 50-count pack provides a practical supply for repeated detail sessions without taking much space in the tool area. Warning! Not suitable for children under 14 years.
Other accessories
Cotton Swab Triangular 50pc Hobby Applicators
300087142€6.59
These triangular cotton swabs are made for model work where a standard household swab quickly loses its edge. The tightly spun cotton tips keep their form during painting, decal application and panel lining, giving steadier contact on small surfaces and more control around raised details. The pointed profile helps guide pigment, lining fluid or decal pressure into corners and along narrow sections that are awkward with a rounded tip. Industrial strength construction means the cotton is less likely to fray when wet or when dipped in solvents, so the working edge stays cleaner through repeated passes. The pack contains 50 swabs, ready for regular bench use across touch-ups, weathering and cleanup steps. Tip dimensions shown in the product data are 10.5 mm in length, with widths of 3.4 mm and 2.3 mm for the two illustrated pointed profiles. On a painted bodyshell, the swabs can press decals down over panel lines and contours with a lighter, more exact touch. During weathering, they help place rust stains, blend effects in confined spots and carry Weathering Master Set colours onto selected areas without flooding the surrounding surface. Warning! Not suitable for children under 14 years.
Model-making tools
Craft Knife II hobby cutter with auto-lock blade
300074153€6.39
Craft Knife II combines a slim retractable format with an ergonomic black handle and a stainless steel segmented blade for precise hobby cutting. The auto-lock slider fixes the blade at the selected extension, helping maintain a steady feel when trimming masking film, scoring sheet material or cutting clean lines through paper and card at the workbench. The blade is made from high-carbon stainless steel with a thickness of 0.38 mm, a detail that supports a fine cutting edge while adding resistance to rust. When the cutting edge dulls, the rear clip detaches by squeezing the tabs on both sides and serves as a blade snapper for removing worn sections. The blade can also be removed, reversed and reinstalled for left-handed use, so the same knife adapts to different hand positions without changing the handle layout. Commercially available small cutter knife replacement blades are compatible. On a model bench, in a craft corner or beside a cutting mat for decal and masking work, the compact body keeps the tool easy to place, pick up and reset between cuts. The retractable blade format also suits short, repeated trimming passes where controlled extension matters as much as edge sharpness. Warning! Not suitable for children under 14 years.
Model-making tools
Craft Saw Blade, replacement hobby saw blade
312997001€6.99
This craft saw blade brings fine-toothed cutting control to detailed hobby and model work. The slim metal form, long rectangular profile and narrow toothed edge suit careful trimming, separating and shaping where a broader workshop saw would feel too coarse. A rounded front tip helps the blade move into tighter working areas while keeping the cutting edge clearly visible during each pass. The blade is shown as a standalone replacement part with a circular mounting hole for fitting to a compatible handle. Its dark metal surface and brushed finish keep the form easy to read on the bench, especially when following marked lines or working close to small components. The continuous row of fine teeth along one side is geared toward measured hand movement rather than fast rough cutting, which makes it useful for controlled material removal in model building, craft assembly and detail work. On the workbench, this blade suits jobs such as trimming sheet material, refining openings and separating delicate sections before sanding or final fitting. It also works well as a spare blade kept alongside other hobby tools, ready for precise hand cutting when a knife or larger saw is not the right match.
Model-making tools
Craft Tools Bending Tweezers for PE Parts
300074117€23.99
Craft Tools Bending Tweezers for PE Parts are made for the precise handling and shaping that photo-etched details demand. The stainless steel tool is designed for brass and nickel silver parts, with a slim 100 mm format that sits neatly in the hand while working over small model assemblies and etched fittings. Unlike general-purpose tweezers, this tool is built around the bending task itself. The tips are made as thin as possible so they can be positioned directly along a fold line before the metal is bent by hand. That close contact helps keep narrow tabs and fine edges aligned while forming crisp angles on delicate components. The tweezers can be used on fold lines up to 10 mm in length, which suits many of the small brackets, panels and detail sections found in photo-etched parts sets. For model builders working with finer metal additions, that focused geometry gives more control than a standard pickup tool. On the bench, the compact length supports careful work in tight spaces around unfinished assemblies, detail sprues and small subassemblies. The stainless steel construction also suits repeated use as part of a regular modelling tool set, whether shaping a single etched flap or preparing several metal details for a larger build. Warning! Not suitable for children under 14 years.
Model-making tools
Curved Scissors for Polycarbonate Hobby Trimming
300074005€19.49
These curved scissors are made for the precise trimming work that polycarbonate R/C car bodies demand. The stainless steel blades combine a slim profile with a curved cutting edge, giving clear access to shaped sections where flat tools can be awkward to position. Around wheel openings, roof edges and molded corners, the blade shape helps follow the line of the body with a steadier cutting path. The compact format suits close hand work on hobby benches, where small adjustments often matter as much as the main cut. The curved blade tip reaches into formed contours with less repositioning, which helps when refining openings after the main body shape is removed. Stainless steel construction gives the cutting edges a solid, workshop-ready feel for repeated use on polycarbonate shells and other detailed trimming tasks linked to model body preparation. Used during body finishing, these scissors support careful shaping before painting, mounting and final assembly. They fit naturally into R/C car build sessions where clean edges and controlled cuts help the bodyshell sit neatly and keep the finished outline crisp. Warning! Not suitable for children under 14 years.
Model-making tools
Curved Scissors, PC Body Tool, 12 mm Blade
300074151€31.49
These curved scissors are made for detailed trimming work on polycarbonate model bodies, where a clean line matters as much as the paint and decals that follow. The 12 mm blade size keeps the cutting area compact, making it easier to guide the edge through tight curves, narrow openings and shaped sections that appear around wheel arches, windows and cockpit cutouts. The curved blade profile changes how the tool meets the material. Instead of forcing a straight path through rounded shell sections, the cutting edge follows the contour more naturally, which helps reduce awkward hand repositioning during fine trimming. On thin polycarbonate sheets, that added control is useful when separating molded sections, refining body edges or cleaning up small areas after the first rough cut. The format suits bench work where precision matters more than reach. In a model building setup, these scissors slot in alongside knives, reamers and sanding tools as a dedicated option for curved cuts. They are especially useful during body preparation, when shell openings and perimeter lines need steady, repeatable shaping before mounting and finishing continue. Their focused 12 mm blade size keeps the tool aimed at detail work rather than broad sheet cutting.
Model-making tools
Cutting Mat α A4, hobby mat, 300 x 220 mm
300074149€15.99
The Cutting Mat α A4 brings a compact 300 x 220 mm work area to model benches where clean cuts, measured layouts and repeatable alignment matter. Its 2 mm thickness and translucent blue finish create a clear visual base for trimming sheet material, marking lines and setting small parts in place during close-up hobby work. The surface is printed with more than a standard grid. In addition to straight measurement guides, it carries R curves and dedicated lines for cutting masking tape, which helps when preparing paint masks or repeating narrow tape widths. The mat is made from low-odor olefin resin, a practical choice for indoor bench use where tools, parts and markings stay close at hand. A 3-layer structure places a hard inner core between softer outer layers, guiding the knife edge through repeated passes while helping reduce wear on blades. The printed markings serve as layout guides for cutting and positioning tasks across model and craft work. On a worktable beside a ruler, knife and small components, the A4 format fits neatly into limited space while still leaving room for measured cuts and angle checks. It suits routine bench tasks such as trimming masking material, sizing styrene pieces, marking curves and keeping small-scale hobby work organized in one defined area.
Model-making tools
Cutting Mat α A5, hobby cutting mat, blue
300074142€10.29
The Cutting Mat α A5 brings a compact 220 x 150 x 2 mm work surface to model making, craft cutting and bench preparation, with a translucent blue finish that stays easy to read under strong task lighting. Its A5 footprint suits smaller desks, side tables and portable tool setups where clean measuring and controlled knife work need to happen in a limited space. Across the printed face, the mat combines edge rulers with millimeter markings, a measurement grid, angle guides, circular references and a large protractor-style semicircle. Radius curves marked from R100 to R500 add a practical reference when shaping or checking rounded sections. The reverse side is plain, giving a second working face when a clear surface is preferred for layout tasks. The olefin resin material is described as low odor, which helps during longer indoor sessions focused on trimming parts, preparing paint masks or sizing sheet stock. On the bench, the printed tape-cutting lines support repeatable masking strips when a ruler and hobby knife are used together. The mat suits detail tasks such as measuring small components, setting cut angles and preparing curved templates before assembly or finishing work begins.
Model-making tools
Decal Scissors, model tool for precise trimming
300074031€24.49
These Decal Scissors bring fine control to 2 common model workshop jobs: trimming paper decals and cutting soft R/C racing rubber tires. The carbon steel construction and pointed blade shape support close, accurate cuts where larger scissors can feel clumsy, whether working around small printed markings or removing thin flash from molded tire edges. For decal work, the narrow tip helps separate intricate shapes from the sheet with less excess paper left around the design. For tire prep, the blades can trim molding flash from soft racing rubber and also support precise modifications when a track setup calls for a specific cut pattern. The compact format suits bench work where small movements matter, and the sharp cutting edge is intended for detail-focused handling rather than broad general-purpose cutting. To preserve the cutting edge, the scissors are intended for paper decals and should not be used on vinyl stickers. On a model bench, they fit naturally beside paint, tweezers and sanding tools during the finishing stage. At the track, they help clean tire edges or prepare a fresh set of rubber before setup changes, giving builders and racers a focused tool for neat, exact trimming work. Warning! Not suitable for children under 14 years.
Model-making tools
Decal Tweezers, hobby tool with angled tips
300074052€22.49
These decal tweezers are shaped for careful handling of both small and larger transfers, giving model work a more controlled touch where printed markings need exact placement. The angled tip makes it easier to approach surfaces at a clear working angle, whether positioning a narrow stripe along an edge or settling a larger graphic onto a curved section. The stainless steel body brings a slim, precise format suited to close bench work, while the tip geometry divides the task by size. Smaller decals can be picked up delicately at the pointed ends, where fine contact helps with detailed alignment on compact areas. Larger decals are supported lower down the tip, allowing a broader hold that helps keep the transfer flat while it is moved into place. This split handling approach is the key mechanism of the tool: the same tweezers use the point for fine markings and the lower tip area for wider pieces. On a model-building bench, that means one tool can move from tiny insignia to broader printed graphics without changing grip or reaching for a second pair. Used alongside water-slide markings during finishing work, the angled form helps maintain a clear view of the placement area while guiding the decal onto the target surface. Warning! Not suitable for children under 14 years.
Model-making tools
Design Knife Blade (30), replacement blades
300074074€5.69
Design Knife Blade (30) supplies a fresh cutting edge for detailed hobby work, with 30 replacement blades stored together in a plastic container for orderly handling between sessions. The blade shape suits fine trimming, scoring and close detail work where controlled cuts matter on small parts and precise outlines. As a replacement accessory for the Design Knife, this set focuses on keeping cutting performance consistent as edges wear through regular use. Swapping a worn blade promptly helps maintain a cleaner cut and steadier handling during modelmaking, craft preparation and careful finishing work. The compact storage case keeps the blades contained in one place on the bench and helps separate unused blades from loose tools and materials. On a build table, the set supports repeated detail tasks such as trimming film, refining edges or cutting small shapes with a sharper working edge available when needed. It also fits neatly into a regular hobby supply setup, where spare blades are kept ready for ongoing assembly, finishing and workshop use.
Model-making tools
Design Knife, hobby craft knife with 30 blades
300074020€12.99
The Design Knife brings fine control to trimming, scoring and detail cutting, with a sharp triangular blade mounted in a metal chuck and a black and gold handle shaped for steady hand work. Ridged and knurled grip areas support careful guidance when working along narrow edges, small openings or precise cut lines on model-making materials. The blade format suits close, deliberate cuts where a larger craft knife would feel less exact, and the metal chuck keeps the mounted blade aligned during detailed work. A set of 30 replacement blades extends the knife's working life across repeated bench sessions and keeps fresh cutting edges close at hand. Protective cap parts are also included for covered storage between uses. The visible Made in JAPAN marking identifies the origin stated on the tool itself. On a model bench, the knife supports clean trimming of parts, careful scoring before separation, and small corrective cuts during finishing work. It also fits general hobby and craft tasks that call for a narrow blade tip, controlled pressure and a compact handle that stays precise in the hand.
Model-making tools
Diamond File for Photo Etched, hobby file
300074066€11.29
The Diamond File for Photo Etched is a precision hobby tool made to refine thin metal details with more control than a standard file. Its diamond abrasive surface is suited to light carving on hard materials such as stainless metal, helping clean up edges on photo-etched parts while keeping the work focused and accurate. The slim profile and pointed working end also make the tool useful for narrow grooves, corners and other small sections that need careful finishing. A key advantage of this file is the way it moves across delicate etched metal. The surface files equally well in any direction, so shaping strokes can follow the angle of the part instead of forcing a single filing path. It is also designed not to snag on thin photo-etched sections, which matters when working with fine tabs, cut lines and small decorative details. The half-circle shape adds another practical benefit by reaching into curved or recessed areas that are awkward with flatter tools. On the bench, this file fits naturally into the finishing stage after parts are cut free and before bending or final placement. It helps remove flash, smooth contact points and tidy hard-to-reach areas on detailed model assemblies where a clean metal edge changes the final look. Warning! Not suitable for children under 14 years.
Other accessories
Display Case C, model display case, 1:20 and 1:24
300073008€21.99
Display Case C gives finished scale models a clean, defined setting with clear walls and a mirrored base insert that brings underside detail into view. Sized for 1:20 racing cars and 1:24 sports cars, it turns a completed build into a focused display piece rather than leaving it exposed on an open shelf. The case has inner dimensions of 247 x 133 x 92 mm, giving compact vehicle models a measured fit that suits low, wide body shapes often seen in racing and sports car subjects. Outer dimensions of 260 x 144 x 105 mm keep the overall footprint manageable for cabinets, desks or hobby rooms. The mirror sheet applied to the base adds a second viewing angle, so chassis parts, floor shaping and lower body contours remain visible without lifting the model. Placed in a collection cabinet, on a workbench or in a study, the case helps present a finished model with a more deliberate layout. It also suits display after painting, decaling and final assembly, when surface finish and stance deserve a clear, unobstructed view.
Other accessories
Display Case P, display case for 1:20 and 1:700
300073020€25.99
Display Case P gives finished scale builds a defined presentation with a clear acrylic cover and a black molded base. Sized for selected 1:20 car models and 1:700 Water Line Series subjects, it turns a completed build into a clean display piece while keeping the shape and finish fully visible. The acrylic upper section offers high transparency, so body lines, paintwork, deck structures and small markings remain easy to see through the cover. Inner dimensions of 287 x 132 x 93 mm provide the enclosed display space, while the outer dimensions of 299 x 145 x 106 mm help when planning shelf or cabinet placement. The product data also lists dimensions of 260 x 144 x 105 mm, but this measurement conflicts with the stated inner and outer sizes and is therefore not used here. On a desk, in a hobby room or inside a display cabinet, the case gives a finished model a clear boundary and a tidier presentation. It suits builders who want to keep a completed car or Water Line subject together in one covered space while leaving the details visible from the outside.
Model-making tools
E-Ring Tool 2 mm, model tool for tiny clips
300074032€11.29
The E-Ring Tool 2 mm is a dedicated hand tool for one of the fiddliest jobs in RC model building: fitting and removing tiny 2 mm E-rings. Its specially designed tip uses a unique shape to catch the clip securely, making small fastening work easier to control during construction and maintenance. Instead of relying on general-purpose pliers or improvised tools, this format focuses directly on the narrow opening and small contact area of 2 mm E-rings. The forked working end helps guide the clip onto its groove or lift it away again when a model needs servicing. That targeted shape is especially useful around compact assemblies where retaining clips sit close to moving parts and limited space makes precise handling more important. The slim tool body keeps the action close to the fingertips for careful placement. On the workbench, it suits repeated jobs such as drivetrain upkeep, suspension service or replacing worn parts that use small retaining clips. During a fresh build, it helps keep clip installation neat and controlled; during maintenance, it supports quicker removal when parts need to come apart for cleaning or replacement. Warning! Not suitable for children under 14 years.
Model-making tools
Engraving Blade Holder, craft tool, aluminum
300074139€18.99
The Engraving Blade Holder combines a slim pen-style form with a 126 mm length and 6 mm diameter, giving precise hand control for fine engraving, scribing and trimming work on model parts. Its lightweight aluminum body keeps handling nimble during careful passes along panel lines, edges and marked cutting paths. A knurled grip section supports steady finger placement, while the chuck in nickel-plated brass secures the blade in the holder. Blade insertion and removal follow a direct sequence: lightly pinch the chuck, rotate the handle to loosen it, place the blade, then tighten the handle again. This mechanism keeps blade changes straightforward when switching between different detailing tasks. The holder is compatible with Fine Engraving Blades 74135, 74136, 74137 and 74138, and also accepts the Design Knife Blade 74074. On the bench, the slim profile suits close, deliberate movements when refining grooves, extending panel lines or cutting precise shapes from sheet material. A protective cap is included to cover the tip in storage, and it can also be fitted to the end of the handle during use to help prevent the holder from rolling across the work surface. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Knife, hobby knife, stainless steel
300074053€13.49
The Fine Craft Knife brings slim stainless steel construction and a segmented precision blade to detailed hobby cutting. Its pen-like shape and stepped slider make it easy to set a short extension for close trimming or a longer reach for straight cuts on paper, masking film and similar light materials at the workbench. The black sliding lock section secures the blade position once set, which helps keep handling consistent during careful edge work. Snap-off blade segments provide a practical way to renew the cutting edge when one section becomes worn, so fine lines and clean corners stay easier to manage over repeated sessions. The narrow metal body keeps the tool compact in storage and easy to place alongside rulers, cutting mats and other bench essentials. Visible blade markings indicate stainless steel construction, and the overall format is suited to model finishing, decal preparation and small craft adjustments where accuracy matters more than force. On a model bench, the knife supports tasks such as trimming masking shapes, cleaning excess material from edges and scoring thin sheet stock before separation. It also fits general craft use for neat, controlled cuts in projects that call for a light touch and a clearly guided blade path. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Craft Saw blade III, hobby saw set, 0.15 mm
300074105€11.29
Fine Craft Saw blade III is a hobby saw set for narrow, controlled cuts where a normal modeling saw would remove too much material. The etched metal blades are just 0.15 mm thick, so the cut stays fine and helps avoid unwanted changes to the length of small parts during model work. The sheet provides 4 blade formats for different cutting situations, with each profile shaped to suit a particular kind of access or cutting line. Fold-over grips let the blades mount onto a Modeler's Knife Item 74040 for a pen-like hold and close control during careful trimming. The metal sheet marking shows the blade variants as III-A, III-B, III-C and III-D, which helps keep the different shapes clearly organised before use. The visible SUS304 marking identifies the stainless steel material used for the etched blade sheet. This tool set suits detailed bench work such as adjusting fitted parts, opening narrow cuts, or separating small sections where accuracy matters more than cutting speed. In model building sessions with tight tolerances and delicate components, the slim blade profile supports cleaner planning before sanding, fitting, or final assembly.
Model-making tools
Fine Craft Saw Blades, scribing tool set 0.1 mm
300074097€11.79
This set of Fine Craft Saw blades is made for precise scribing and detail recovery in model work. The 0.1 mm stainless steel construction supports narrow cuts when seam cleanup has softened surrounding detail, and it also helps deepen existing panel lines with a controlled, fine kerf. On the etched sheet, 6 blades are arranged in 2 rows of 3, ready for careful removal and use at the bench. The blade selection combines straight profiles with rounded profiles, which gives more flexibility across flat sections, curved bodywork and tighter access points. Compared with Item 74094, these blades use smaller teeth and a finer pitch, which suits more delicate surface work where heavier cutting action would be too coarse. The material is stainless steel, and the thin profile keeps the cutting edge focused on light engraving and detail correction rather than broad removal. Fold the grips over and the saws can be used on their own for close hand control during panel restoration, trim work or fine surface adjustment. When a longer handle is preferred, the blades may also be fitted to Modeler's Knife Item 74040. At the workbench, that combination supports steady passes along engraved lines, corners and shaped sections on scale models.
Model-making tools
Fine Drill Bit 0.3 mm, model tool accessory
300074081€6.49
The Fine Drill Bit 0.3 mm brings exact sizing to delicate model-making tasks where a very small opening matters. With its 0.3 mm diameter, it supports careful drilling for fine detailing, subtle modifications and other close-control bench work on miniature parts. This single drill bit is suited to jobs that call for a narrower diameter than standard hobby bits can offer. It can be used to prepare tiny holes for detail placement, light pinning work or other precision steps during a build, while keeping material removal to a minimum. The compact accessory format makes it easy to keep alongside knives, files and other workshop essentials used in scale modelling. On the workbench, the 0.3 mm size is especially useful when a project needs measured, hand-led accuracy rather than a broader cut. It fits naturally into careful model assembly, detailing and finishing routines, whether the task involves refining a small component or preparing a precise point for the next build step. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Drill Set, hobby drill bit set, 0.3-0.8 mm
300074044€18.49
This Fine Drill Set brings 5 micro sizes together in one compact format, giving model and hobby work a precise way to open small holes from 0.3 mm up to 0.8 mm. The range covers 0.3, 0.4, 0.5, 0.6 and 0.8 mm, which helps when a build calls for closely stepped diameters rather than one broad jump between sizes. The slim metal bits are suited to detail-focused tasks where larger workshop drills would be too coarse. Small diameter changes matter when preparing openings for pins, wire, rods or other fine components, and this set keeps those increments close at hand. The spiral cutting sections are made for careful drilling on miniature parts, while the fold-open case stores each bit in its own place instead of letting the sizes mix loose on the bench. That layout also makes it easier to return each bit after use and pick the next diameter quickly. On a modelling desk, the set fits naturally beside cutters, files and sanding tools for bodywork, cockpit details, scratchbuilding or electronics-related hobby tasks. The compact case travels neatly to club meets or workshop sessions, and the grouped size selection supports steady, methodical progress when a project needs more than one hole diameter. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.15mm, modeling tool
300074145€33.49
The Fine Engraving Blade 0.15mm is a precision modeling tool for adding or sharpening engraved detail on plastic parts. Its tungsten carbide construction is designed for smooth, consistent scoring, making fine panel lines and custom surface work easier to control during advanced finishing tasks. The 0.15 mm blade thickness suits narrow engraved lines, while the 25 mm total length and 2 mm shank match dedicated tool setups for stable handling. Recommended compatibility includes the Engraving Blade Holder 74139, plus Fine Pin Vise D 74050 and D-R 74112. The working method is straightforward: hold the blade at a 45° to 60° angle, then pull lightly across the plastic surface and repeat as needed to deepen the line with a clearly defined result. A color mark on the shank helps identify the thickness quickly when several blade sizes are kept together. For bench work focused on panel lines, hatches, access covers or custom scribed detail, this blade supports careful, repeatable passes instead of heavy pressure. The included storage case holds up to 10 blades, keeping matching sizes close at hand during longer modeling sessions. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.1mm, hobby tool blade
300074135€33.99
The Fine Engraving Blade 0.1mm is a precision hobby tool blade for adding sharply defined surface detail to plastic models. Made from tungsten carbide, it is designed for advanced engraving work such as refining panel lines or cutting new fine grooves, with a slim 0.1 mm profile that supports exact, narrow scoring. The blade measures 25 mm in total length and uses a 2 mm shank diameter for use with dedicated holders and compatible pin vises. For operation, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface, then passed again as needed to deepen the line gradually. This pull action helps create a cleaner result than forcing a deep cut in one pass. A color-coded marking on the shank identifies the blade thickness quickly when several sizes are kept on the bench. Each blade comes in a storage case that holds up to 10 blades, keeping replacements together between sessions. It suits careful detailing on body panels, access hatches and other recessed lines where a narrow, controlled cut gives the surface a more defined scale look. Recommended holders are available separately. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.25mm, hobby tool blade
300074162€32.99
The Fine Engraving Blade 0.25mm is a precision hobby tool blade for scoring narrow lines and sharply defined surface detail on model parts. Held at a 45 to 60 degree angle and pulled lightly across the surface, it cuts a controlled scribed line that can be deepened gradually with repeated passes. Its 25 mm total length and 2 mm shank diameter suit compact hand-tool setups where close control matters. A color-coded marking on the shank identifies the blade thickness quickly, which helps when several engraving sizes are kept on the bench for different line widths. The blade is recommended for use with the dedicated Engraving Blade Holder and is also compatible with Fine Pin Vise D and Fine Pin Vise D-R. One blade is supplied. The included case stores up to 10 blades, making it easier to keep replacements together and ready for the next detailing session. On aircraft, cars, armor or sci-fi subjects, the narrow 0.25 mm profile supports clean recessed lines, refined hatch outlines and sharper separation between adjacent surface sections.
Model-making tools
Fine Engraving Blade 0.2mm, craft tool blade
300074136€32.99
The Fine Engraving Blade 0.2mm is a precision craft tool blade for adding narrow engraved lines to plastic model surfaces. Made from tungsten carbide, it combines a very fine 0.2 mm blade thickness with a 25 mm overall length and a 2 mm shank, creating a compact format suited to controlled hand work on small details. This blade is used by inserting it into a compatible engraving blade holder or pin vise, then drawing it lightly across the surface in several passes to cut a clean groove. The documented use method focuses on a pull stroke rather than pushing down with force, which helps avoid raised edges, distortion, or blade bite in the material. A colour mark on the shank identifies the thickness, so this 0.2 mm version can be separated quickly from 0.1 mm, 0.3 mm, and 0.5 mm blades in the same range. An engraving blade holder is sold separately. On model parts, templates, and panel line work, the narrow profile supports crisp scribing where broader blades would remove too much material. The included case stores up to 10 blades, keeping spare and in-use blades together between work sessions. Protective goggles are recommended during use, as plastic shavings can form while engraving. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.3mm, hobby tool blade
300074137€32.99
The Fine Engraving Blade 0.3mm is a precision hobby tool blade for adding sharper panel lines and custom surface detail to scale models. Made from tungsten carbide, it is designed for smooth, consistent scoring when held at a 45 to 60 degree angle and drawn lightly across the surface in repeated passes. Its 25 mm total length and 2 mm shank diameter suit the dedicated Engraving Blade Holder and also fit Fine Pin Vise D and Fine Pin Vise D-R. The 0.3 mm thickness gives a defined line width for visible detail work without moving into broader cuts. A color-coded marking on the shank helps identify the blade thickness quickly when several sizes are kept together. Each blade comes in a storage case that holds up to 10 blades, keeping replacements and used blades organized between sessions. This blade suits advanced model finishing tasks such as deepening panel lines before paint, refining molded detail, or adding new engraved features to body shells and other model surfaces. Light repeated pulls across the material allow gradual control over depth and line definition, which is especially useful when working on visible exterior sections where clean edges matter. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.4mm, hobby tool
300074147€32.49
The Fine Engraving Blade 0.4mm is a precision hobby tool for adding sharper surface detail to plastic models. Its tungsten carbide construction is designed for engraving panel lines and custom scribed features with a smooth, consistent finish, giving shells, fuselages and body panels cleaner definition under paint and weathering. This blade measures 25 mm in total length and uses a 2 mm shank, a format intended for controlled detail work with compatible holders. Recommended use is with the dedicated Engraving Blade Holder 74139, and it is also compatible with Fine Pin Vise D 74050 and D-R 74112. For use, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface to score it, with repeated light passes used to build a clearly defined line. A color-coded marking on the shank identifies the blade thickness quickly when several sizes are kept on the bench. The supplied case stores up to 10 blades, which helps keep matching sizes together between projects and supports a tidier setup for ongoing model detailing. This 0.4 mm version suits builders who want to emphasize existing lines or cut new recessed detail with a clearly controlled width. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Blade 0.5mm, hobby tool blade
300074138€33.49
The Fine Engraving Blade 0.5mm is a precision hobby tool blade for adding sharper definition to model surfaces. Made from tungsten carbide, it is designed for engraving panel lines and cutting custom detail with a smooth, consistent finish that suits advanced model work. The 0.5 mm blade thickness gives a broader engraved line than finer variants in the same range, while the 25 mm total length and 2 mm shank diameter keep the format compact for controlled handling. It is recommended for use with the dedicated Engraving Blade Holder 74139 and is also compatible with Fine Pin Vise D 74050 and D-R 74112. The shank carries a color-coded marking so the thickness can be identified quickly when several blade sizes are kept together. Each blade comes in a storage case that can hold up to 10 blades. For use, the blade is held at a 45 to 60 degree angle and pulled lightly across the surface to score it. Repeated light passes help build a clearly defined line on plastic model parts, whether refining existing panel detail or adding new engraved features to a custom build. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Engraving Needle 20°, modeling tool
300074148€23.49
The Fine Engraving Needle 20° is a precision modeling tool for clean, controlled scribing on curved and straight surface details. Its pointed needle tip differs from the hooked profile used on engraving blades, so it can trace arcs, corners and fine panel lines with a lighter, more exact feel on model parts. Crafted from cemented carbide and finished to a precise standard, the needle combines a 25 mm total length with a 2 mm shank for stable mounting in compatible holders. The working method is simple and exact: insert the needle carefully, hold it at the shown angle, then pull it lightly across the surface in repeated passes to score a clearly defined line. This approach helps avoid rough edges that can come from forcing a single deep cut. The needle is recommended for the Engraving Blade Holder 74139 and is also compatible with Fine Pin Vise D 74050 and D-R 74112. On the workbench, it suits tasks such as emphasizing existing panel lines, adding new engraved detail and refining curved shapes on plastic model surfaces. A protective case is included for storage and can hold up to 10 needles as well as separately sold engraving blades, keeping small precision tools together between detailing sessions. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Fine Lapping Film #3000, polishing film, 3 sheets
300087144€9.99
Fine Lapping Film #3000 is a finishing supply for surface work on model parts, using polyester film coated evenly with fine abrasive particles to reduce blemishes and leave a smooth, consistent finish. The #3000 grade is suited to careful polishing stages where control matters, especially on clear parts, painted sections, and small areas that benefit from a flat, flexible sheet rather than a bulkier abrasive block. The uniformly coated surface helps maintain an even contact pattern during polishing, which is useful when refining plastic and metal components without concentrating abrasion in one spot. As a thin film format, each sheet is easy to position on narrow edges, curved sections, and detailed areas where precision matters. The material can also be used for wet sanding, adding another working method for controlled surface refinement during paint preparation or final finishing. With 3 sheets in the pack, the film fits neatly into repeated bench use, whether the task is cleaning up minor surface marks, improving clarity on transparent parts, or speeding up polishing on painted components. It suits hobby workflows that move step by step through preparation, correction, and final surface refinement. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Fine Lapping Film #8000, sanding film, 3 sheets
300087200€10.49
Fine Lapping Film #8000 brings an extra-fine abrasive step to paint finishing, helping model builders smooth rough surfaces, seams and joints before the final polish. The 3 pink sheets measure 93 x 228 mm each and offer a thin, flexible format that can be cut or handled to suit broad panels as well as smaller sections on scale builds. Each sheet is uniformly covered with fine abrasive particles, which supports an even contact pattern during sanding and helps avoid patchy results on painted areas. The #8000 grade is positioned as a pre-treatment for compound polishing, making it a useful stage when working toward a glossy surface finish. Wet sanding compatibility adds another practical option, especially when a controlled, refined surface correction is needed on delicate paintwork. On the workbench, the film suits finishing passes on body panels, cleanup around joints, and surface preparation before compound use. It fits naturally into model painting routines where a smoother base and a more consistent sheen matter across the final finish.
Model-making tools
Fine Pin Vise D, hand drill, 0.1-3.2 mm chuck
300074050€23.99
Fine Pin Vise D is a manual hand drill for model assembly tasks that call for clean, controlled holes in different diameters. Its chuck accepts drill bits from 0.1 mm to 3.2 mm, giving one compact tool the range to handle very small openings as well as larger pilot holes. The metal body, slim profile and precision tip suit close work on parts where powered drilling would be too aggressive. The long knurled handle gives the fingers a secure hold while the tool is turned by hand, and the hexagonal top cap provides a steady contact point for guided rotation. That layout helps when starting a hole exactly on a marked spot, opening mounting points, or adjusting fit on detailed assemblies. Because the drilling action is manual, the bit can be advanced gradually with close control over pressure and direction. This makes the tool useful for careful work on model parts, conversion tasks and other fine hobby jobs that depend on accuracy rather than speed. On the workbench, Fine Pin Vise D fits naturally alongside drill bits used for plastic kits, scratch-building and detail modification. It supports measured, step-by-step drilling where neat edges and exact placement matter most. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise D-R, hobby drill, 0.1-3.2 mm
300074112€24.49
The Fine Pin Vise D-R is a hand-held hobby drill made for precision hole work in scale model projects. Its 0.1 mm to 3.2 mm bit capacity covers delicate openings for fine detailing as well as broader drilling tasks used during model modification, giving steady manual control where small parts call for a lighter touch. The body is made from nickel-plated brass, combining a clean metallic finish with the weight and feel needed for accurate handling. An elastomer grip sits at the center to support a secure hold during slow, careful turns. At the rear, the rotating grip end uses built-in ball bearings, so the cap moves smoothly against the hand while the tool turns. This mechanism helps keep pressure consistent and the drilling motion controlled when working on narrow contact points or marked pilot positions. On the bench, the Fine Pin Vise D-R suits jobs such as opening mounting points, refining detail areas, or preparing parts for custom changes on scale models. The metallic sticker marked PIN VISE and the engraved rubber grip add clear workshop identity while the compact manual format stays focused on close, accurate work. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pin Vise, hand drill for 0.1-1.0 mm bits
300074051€14.79
The Fine Pin Vise brings measured hand control to drilling jobs that appear throughout model assembly, especially when small parts need a clean opening without the force of a powered tool. Its 0.1 mm to 1.0 mm bit range suits very fine work, from starting pilot holes to opening marked points in miniature components. The tool uses a compact metal construction with a black body, a textured center section and a silver front chuck. The knurled grip improves purchase during slow rotation by hand, while the chuck is shaped to hold micro drill bits used in detailed hobby tasks. A hexagonal swivel cap at the rear provides a firm resting point, allowing steady forward pressure while the fingers turn the body. This layout supports careful alignment when working on narrow surfaces, small panels or parts that need exact placement. On the bench, the Fine Pin Vise fits the rhythm of precise build work such as preparing openings before fitting detail parts or refining holes after test placement. It also suits craft and miniature projects where a hand-driven tool gives closer feedback than a motorized drill. Batteries are not required.
Model-making tools
Fine Pivot Bit 0.2mm, drill bit, 1mm shank
300074113€7.99
The Fine Pivot Bit 0.2mm Shank 1mm is built for precise hole drilling in small-scale model work, where a very fine cutting diameter and steady handling are essential. Its 0.2 mm bit size targets delicate drilling tasks, while the 1 mm shank gives the tool a secure fit in compatible hand vises. The pivot drill bit design uses a bit section that is thinner than the shank. This construction helps reduce deviation at the drilling point and supports more accurate placement when working on fine parts. The material is described as shatter-resistant, giving the bit added resilience during careful manual drilling. A high-quality bit finish further supports clean results, especially when accuracy matters more than speed. This bit suits detailed workshop tasks such as opening tiny guide holes, refining model components or preparing parts that need exact alignment. It is compatible with the 74050 Pin Vise D, 74051 Pin Vise S and 74112 Pin Vise D-R, fitting neatly into established hand-tool setups for controlled hobby work.
Model-making tools
Fine Pivot Bit 0.6mm Shank 1mm, drill bit
300074127€5.59
The Fine Pivot Bit 0.6mm Shank 1mm is made for detailed modeling work where hole placement and clean results matter. Its 0.6 mm bit is thinner than the 1 mm shank, a pivot-drill layout that helps reduce deviation during drilling while giving the bit greater resistance against shattering. That combination suits small, exact openings in parts that need a controlled start and a neat finish. The high-quality bit finish supports excellent hole quality, which is especially useful when refining components for scale builds or adding precise openings to scratch-built sections. The bit can be used on plastic, metal, brass and wood, making it a practical choice for mixed-material bench work instead of a single-surface specialist. A plastic storage case is included to keep the bit protected between sessions and easier to sort with other workshop tools. Compatibility with Pin Vise D 74050 and Pin Vise D-R 74112 gives this bit a clear place in a hand-tool setup for careful drilling tasks. On a workbench, it suits measured marking, slow hand rotation and close control when a standard bit would be too thick for the job. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.7mm Shank 1mm, drill bit
300074128€5.59
The Fine Pivot Bit 0.7mm Shank 1mm is built for detailed drilling work where a clean, controlled opening matters. Its pivot construction uses a 0.7 mm bit with a thicker 1 mm shank, a layout that supports precise hole placement while helping reduce deviation during delicate modelling tasks. The thinner cutting section handles fine openings, while the stronger shank adds resistance against shattering under careful hand or tool use. A high-quality bit finish supports clean hole quality, which is especially useful when preparing parts for added detail or refining small openings in model components. The bit can be used on plastic, metal, brass and wood, making it a practical choice for different stages of bench work across mixed-material projects. A plastic storage case is included to keep the bit protected between sessions and easier to sort with other workshop tools. On the workbench, it suits jobs such as opening pilot holes, refining marked drill points and handling small-scale detailing where a 0.7 mm diameter is required. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.8mm, drill bit, 1.5mm shank
300074132€5.59
This Fine Pivot Bit combines a 0.8 mm drilling tip with a 1.5 mm shank to support precise hole work on small model components. The pivot format uses a bit section that is thinner than the shank, which helps keep the drill running with less deviation while adding resistance against shattering during careful hand drilling. The 6.0 mm flute length gives space for controlled cutting, and the recommended hole depth of 5.5 mm helps match the bit to fine-detail tasks where depth matters as much as diameter. The finished surface of the bit is designed for excellent hole quality, which is useful when parts need a clean opening for pins, wire routes or detail additions. Use extends across plastic, metal, brass and wood, making this a practical choice for mixed-material bench work. A plastic storage case is included for keeping the bit protected between sessions. Compatibility with Pin Vise D 74050 and Pin Vise D-R 74112 makes the bit easy to place into established hand-tool setups. On the workbench, it suits measured drilling in compact spaces, whether opening starter holes in styrene, refining brass details or adding neat openings to wooden parts. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 0.9mm, drill bit, 1.5mm shank
300074133€5.59
This Fine Pivot Bit combines a 0.9 mm bit with a 1.5 mm shank to support precise hole drilling in detailed model work. The pivot design uses a bit section that is thinner than the shank, which increases resistance against shattering and helps reduce deviation while drilling by hand. A 6.0 mm flute length gives the cutting section a compact working area for controlled entry, and the recommended hole depth of 5.5 mm helps match the bit to small, exact tasks. The high-quality finish supports clean hole quality, which matters when opening mounting points, preparing detail holes or refining parts that need accurate alignment. The bit can be used on plastic, metal, brass and wood, making it useful across different stages of model building and workshop preparation. Each size comes with a storage case for keeping the bit protected between sessions. Compatibility with Pin Vise D and Pin Vise D-R makes it easy to pair with established hand-drilling setups for bench work, part modification and careful finishing on scale projects. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 1.1mm, drill bit for precise holes
300074140€5.59
The Fine Pivot Bit 1.1 mm with a 1.5 mm shank is made for controlled, accurate drilling in detailed hobby and model work. Its pivot design uses a bit section that is thinner than the shank, a construction that increases resistance against shattering and helps keep the drill path from wandering as the hole starts. This bit extends the Fine Pivot range beyond the existing 0.2 to 1.0 mm sizes, adding a larger option for jobs that still call for a slim, precise cutting point. The bit size is marked directly on the tool for quick recognition during bench work, which helps when several diameters are kept close at hand. A high-quality finish supports clean hole quality, especially where neat openings matter for pins, rods or added detailing. The bit can be used on plastic, metal, brass and wood, giving one tool a place across several stages of a build. Each size comes with a storage case for keeping the bit protected between sessions. Compatibility with Pin Vise D and Pin Vise D-R makes it easy to add this 1.1 mm size to an existing hand-drilling setup for careful workshop tasks and fine adjustment work. Warning! Not suitable for children under 14 years.
Model-making tools
Fine Pivot Bit 1.2mm, drill bit for pin vise
300074141€5.59
The Fine Pivot Bit 1.2mm Shank1.5mm is made for precise drilling work where clean placement matters. Its 1.2 mm bit is thinner than the 1.5 mm shank, a pivot design that gives the working tip added support and helps keep the drill line steady during careful hand use. This geometry is intended to reduce shattering and decrease deviation, which is especially useful when opening exact holes in model parts and detail components. The bit is marked with its size for quick recognition on the bench, so it can be picked out easily when several diameters are in use. A high-quality finish supports neat hole edges across different tasks. The bit can be used on plastic, metal, brass and wood, covering common materials found in scale modelling, scratch-building and modification work. Each size comes with a plastic storage case for straightforward organisation between sessions. The bit also complements existing Fine Pivot Bit sizes from 0.2 mm to 1.0 mm, making it a practical addition when a 1.2 mm diameter is needed for larger openings or specific fitting points. Compatible with Pin Vise D and Pin Vise D-R. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives Fine Set, model sanding sheets
300087010€5.99
The Finishing Abrasives Fine Set brings 5 sanding sheets into model work where surface correction, smoothing and preparation need controlled grit steps rather than a single coarse pass. With 400, 600 and 1000 grades in one pack, the set supports gradual refinement on parts that need shaping first and a cleaner finish afterward. The sheet mix includes 2 pieces of 400 grit, 1 piece of 600 grit and 2 pieces of 1000 grit, giving a practical spread for workshop tasks around body shells, detail parts and scratch-built sections. The abrasive can be used on metal, wood and model materials such as ABS or styrene, which makes the set useful across different stages of a build or modification. Wet sanding helps carry away residue during finer finishing, while dry use suits quick corrections and edge work at the bench. The clog-resistant surface helps the abrasive keep cutting more consistently through repeated use. On a build table, the finer 1000 grit sheets suit final smoothing before paint-related steps, while 400 and 600 grit grades handle earlier correction and blending work. The flat sheet format stores easily with other workshop supplies and can be brought out whenever seams, edges or filled areas need a more even surface. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives Mid., sanding sheets, 5-pack
300087009€4.99
Finishing Abrasives Mid. brings 5 sanding sheets into the workshop for modification and finishing work on model surfaces. The pack combines 180 grit, 240 grit and 320 grit grades, so heavier correction, intermediate smoothing and finer surface preparation can be handled with one set while parts move from shaping to paint-ready refinement. Each sheet measures 180 in the listed format and is intended for use on metal, ABS and wood. The mixed grit layout gives 2 sheets of 180, 1 sheet of 240 and 2 sheets of 320, which helps match the abrasive cut to the task instead of forcing one grade across every step. Wet or dry use changes the working method to suit dust control, surface feel or the material being refined. The clog-resistant abrasive surface keeps contact more even during repeated sanding passes, which is especially useful when cleaning seams, adjusting edges or refining filled areas on scale builds. On the bench, the coarser sheets can be used to correct joins and reshape small sections, while the finer grades help prepare panels, body parts or wooden components for the next coat or finishing stage. The format also suits keeping several grit levels close at hand during one build session, so surface correction and final smoothing can follow in a clear sequence. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P1000, sanding sheets
300087057€3.49
Finishing Abrasives P1000 brings controlled surface refinement to model building and modification work. The 3-sheet pack is intended for finishing tasks on Tamiya builds, where a fine abrasive grade helps even out transitions, tidy edges and prepare parts for the next stage at the workbench. The P1000 grade suits detail-focused sanding where a coarser sheet would remove too much material. Each sheet can be used on metal, ABS and wood, which makes the pack useful across mixed-material projects such as body parts, structural sections and scratch-built additions. Wet or dry application gives flexibility in how the abrasive is handled during different stages of shaping and finishing. The clog-resistant surface helps maintain a more even cut while working across flat sections, corners and smaller contact points. At the bench, the sheets fit naturally into repair, conversion and paint-prep routines, whether smoothing filler, refining joins or cleaning up modified parts before the next coat. The compact 3-sheet format also makes it easy to keep a fresh abrasive grade ready alongside knives, files and putty during ongoing model work. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P1200, sanding sheets
300087058€3.89
Finishing Abrasives P1200 brings controlled, fine sanding to model making and detail work, with a grit grade suited to refining surfaces before the next finishing step. The sheets are made for modification and finishing tasks on Tamiya builds, where clean transitions and even surfaces matter across small parts and visible sections. The abrasive can be used on metal, plastic and wood, which makes it useful across mixed-material projects without changing to a different sheet for each surface. Wet or dry application allows the sanding method to match the task, whether a damp pass is preferred while smoothing a painted area or a dry pass suits quick correction work on edges and joins. The clog-resistant surface helps the abrasive keep cutting more evenly during repeated strokes, especially when working on filler, coatings or fine surface irregularities. The pack contains 3 sheets, giving material for repeated finishing sessions or separate use across different stages of a build. At the workbench, P1200 grit suits the point where shaping gives way to refinement, such as smoothing a seam after adjustment, evening out a repaired section or preparing a surface for further coating. It also fits small, careful corrections on parts that need a lighter touch than coarse abrasives can provide. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P1500, sanding sheets
300087059€3.89
Finishing Abrasives P1500 brings a fine sanding grade to modification and finishing work on model parts, with 3 sheets sized for repeated use across shaping, cleanup and paint preparation. The P1500 surface is intended for refining rather than heavy removal, making it useful where a smoother finish is needed before the next step on metal, ABS or wood. The sheets can be used wet or dry, so the sanding method can match the material and the stage of work. Wet use helps carry away residue during fine surface work, while dry use suits quick corrections during fitting or edge cleanup. The clog-resistant abrasive surface keeps the sheet working longer during repeated passes, which is especially useful when smoothing filled areas, blending transitions or preparing small sections for paint. The thin, flexible sheet format also makes it easier to follow flat faces, edges and gentle curves on model components. On the bench, this grade fits the later stages of body preparation, part refinement and finishing touches before colour coats or final assembly. It also suits small correction work between build steps, where a controlled abrasive surface is needed instead of a coarser cut. For model making, workshop touch-ups and careful surface preparation, these 3 P1500 sheets add a precise finishing material to the tool set. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P2000, sanding sheets
300087060€3.79
Finishing Abrasives P2000 brings controlled surface refinement to model work where the last sanding stages shape the final look. The fine P2000 grit is suited to modifying and finishing tasks on Tamiya builds, helping prepare surfaces for clean paint application and careful detail work. Each sheet can be used on metal, wood and model materials, which makes the set useful across different parts of a single build or across separate workshop projects. The abrasive can be used wet or dry, so the sanding method can be matched to the material and the stage of work. Its clog-resistant surface helps the abrasive keep cutting consistently during longer finishing sessions, especially when smoothing primer, refining filled areas or evening out small surface marks. With 3 sheets in the pack, the set fits naturally into regular bench use, whether the task is correcting a seam line on a body shell, softening an edge on a fabricated part or preparing a painted section for the next coat. The fine grade also suits careful touch-up work where a lighter abrasive action is needed than in earlier shaping steps. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P400, sanding sheets, 3-pack
300087054€2.89
Finishing Abrasives P400 brings controlled surface preparation to model building, repair and finishing work with a medium grit suited to refining parts before the next stage. The sheets are intended for modifying and finishing Tamiya ranges and can be used on metal, wood and plastic, making them useful across mixed-material builds on the workbench. The P400 grade is suited to smoothing joins, cleaning up adjusted edges and evening out surfaces after shaping or correction work. Wet or dry use allows the sanding method to match the task, with water helping manage sanding residue on delicate areas and dry use supporting quick bench work between assembly and paint preparation. The clog-resistant abrasive surface helps maintain cutting action through repeated passes, which is especially useful when working across seams, corners and small shaped sections. With 3 sheets in the pack, the set fits routine workshop use such as part cleanup, body preparation, scratchbuilt detail work and general finishing on hobby projects. It also works well as a bench staple for keeping different grit stages organised alongside fillers, primers and other modelling supplies. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P600, sanding sheets
300087055€2.89
Finishing Abrasives P600 brings controlled surface refinement to model making, with a grit grade suited to modification work and finishing passes on parts that need a smoother, more even surface before the next step. The sheets are intended for use when modifying and finishing Tamiya builds, where steady abrasion helps tidy transitions, soften small imperfections and prepare components for further treatment. The abrasive material works on metal, wood and synthetic surfaces, which makes the pack useful across different stages of a build and across mixed-material projects. P600 grit sits in a practical range for refining rather than heavy stock removal, making it a strong choice when seams, edges or worked areas need a more uniform surface. The sheets can be used wet or dry, allowing the sanding method to match the material and the task. A clog-resistant surface helps maintain cutting action through repeated use, which supports cleaner, more consistent finishing on detailed parts. On the bench, these sheets fit naturally into body preparation, part cleanup and final surface correction before painting or after adjustment work. The pack contains 3 sheets, giving a ready supply for repeated workshop use across multiple model projects. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives P800, sanding sheets 3-pack
300087056€2.89
Finishing Abrasives P800 is a 3-pack of sanding sheets made for modification and finishing work on modelmaking projects. The P800 grit gives a fine abrasive grade suited to smoothing surfaces, refining transitions and preparing parts for later paint or detail steps. Each sheet is thin and flexible, which helps when working around edges, corners and shaped sections where rigid sanding tools can be less precise. The sheets are suitable for metal, plastic and wood, covering the main materials often found in scale builds and workshop repairs. Wet or dry use allows the sanding method to match the task: water can help control residue during careful finishing, while dry sanding suits quick corrections and general surface preparation. The clog-resistant surface supports more even abrasion during repeated passes, which helps maintain a steady finish on small components and narrow contact areas. On a workbench, these sheets fit naturally into body preparation, part cleanup and final surface refinement before painting or assembly. They also suit touch-up work on already built sections, where controlled abrasion matters more than heavy material removal. Warning! Not suitable for children under 14 years.
Model-making abrasive material
Finishing Abrasives Ultra Fine Set, sanding sheets
300087024€5.89
The Finishing Abrasives Ultra Fine Set brings 5 sanding sheets together for careful surface work on model builds and detail parts. With 1200, 1500 and 2000 grit grades in one pack, the set supports the later stages of shaping, smoothing and finish preparation where small surface marks and transitions need a lighter touch. The sheet mix includes 1x 1200 grit, 2x 1500 grit and 2x 2000 grit, giving a clear progression across very fine abrasive levels. These abrasives can be used on metal, wood and plastic, which makes the set useful across mixed-material model work rather than only one surface type. Wet or dry application allows the sanding method to match the task at hand, and the clog-resistant construction helps the abrasive surface stay usable during longer finishing sessions. On a workbench, the finer grades suit cleanup after filling, seam reduction, paint preparation and final surface refinement before the next coat or finishing step. The compact 5-sheet format also makes it easy to keep several grit options close at hand during careful modification work on scale models and accessories. Warning! Not suitable for children under 14 years.
Model-making tools
Handy Craft Saw II, craft saw, 2 carbon steel blades
300074111€12.49
Handy Craft Saw II brings fine-toothed cutting control to model modification, Mini 4WD work and woodcraft, with 2 carbon steel blades that cover both detailed trimming and broader cuts. The slightly thicker .35 mm blade format helps the saw stay truer in use, while the smooth finish supports cleaner edges on shaped parts and craft sections. The set contains 1 wide blade and 1 slim blade, each designed for a different cutting task rather than repeating the same profile. The wide blade measures 46 mm and gives more reach for straight trimming passes, while the slim 43 mm blade suits tighter areas where a narrower cutting line is useful. Both blades fit into the included grip, creating a compact hand tool that can be adapted to the material and the cut path. Carbon steel construction gives the blades the crisp tooth definition needed for careful hobby and craft work. On the bench, the saw suits jobs such as separating parts, opening slots, refining body sections or adjusting wood pieces with a hand-guided cut. In model and craft sessions where a powered tool would be too aggressive, the fine teeth and narrow blade profiles support slower, more deliberate shaping with clear visual control. Warning! Not suitable for children under 14 years.
Model-making tools
HC File PRO/Half-Rd 5mm, hobby file, half-round
300074126€34.99
The HC File PRO/Half-Rd 5mm is a precision hand tool for shaping and refining model materials with a slim 160 mm format and a half-round working profile. One side presents a flat filing surface while the opposite side follows a curved form, making it easier to work along straight edges, inside curves and narrow recesses with the same tool. Its double-cut pattern gives the teeth a clear, even bite, which helps remove material in a controlled way during adjustment and finishing work. The file is intended for hard materials such as metal, carbon fiber and FRP, and it also handles standard model parts where a finer fit or cleaner contour is needed. A chrome coating on the teeth helps prevent shavings from packing into the cut, so the working surface stays clearer through repeated passes. The black PVC grip has a non-slip finish, plus the twin star logo and white printed wording. At the workbench, this format suits trimming a tight corner, refining a curved opening or smoothing a shaped edge before the next build step. A plastic case is included for storage between sessions and helps keep the filing surface protected when the tool is not in use. Warning! Not suitable for children under 14 years.
Model-making tools
HG Angled Tweezers, model tool, stainless steel
300074047€18.99
HG Angled Tweezers bring precise control to model work where small plastic parts and narrow spaces demand a more exact grip. The stainless steel construction and angled tip shape support clean pickup, steady positioning and careful release, especially when fingers or broader tools block the view of the work area. This model tool is made for handling delicate components during assembly rather than for general household use. The angled profile approaches parts from the side, which helps when placing pieces near raised details, inside tighter sections or along edges that are awkward to reach with a straight tool. Precision-made tips transmit small hand movements directly into controlled placement, which matters when aligning lightweight parts before fixing them in place. The stainless steel build also suits repeated bench use around cutting mats, sprues and subassemblies. On the workbench, the tweezers fit naturally into tasks such as lifting trimmed parts from the mat, holding a component steady during test fitting or guiding a small piece into its final position on a scale model. For detailed assembly sessions, this focused shape keeps handling accurate and the contact point easy to judge. Warning! Not suitable for children under 14 years.
Other accessories
HG II Rounded Flat Brush, medium paintbrush
300087230€9.99
The HG II Rounded Flat Brush Medium PBT is a dedicated hobby paintbrush built for controlled coverage and clean handling during model painting. Its rounded flat brush shape combines the broader contact of a flat profile with a softer edge, helping paint settle across surfaces with more control than a sharply squared tip. PBT bristles give the brush its working character, supporting steady paint pickup and a consistent stroke across repeated passes. The medium size suits a wide range of bench tasks, from laying down base colour on larger sections to guiding paint along edges, raised details and shaped panels. Within the HG II tool range, this brush is positioned as a practical choice for careful finishing work where brush shape and bristle response matter as much as colour choice. The format also fits hobby routines that move between coverage and refinement without changing tools for every step. At the workbench, the brush suits model parts, figures and other detailed painted surfaces that call for measured, even application. It works well in sessions that alternate between broader areas and tighter sections, keeping the painting process focused and precise. Warning! Not suitable for children under 14 years.
Model-making tools
HG RevAction Angled Tweezers, hobby tool
300074102€22.49
HG RevAction Angled Tweezers combine a reversed operating mechanism with an angled tip to give fine-detail work a more controlled feel at the bench. Squeezing the handle opens the tips and releasing closes them, so the tool can keep hold of a small part while the hand focuses on guiding it into place in tight, crowded areas. The angled profile helps the tips approach recessed spots and narrow gaps from a clearer working angle. Stainless steel construction gives the tweezers a precise, tool-focused build, while vulcanized fiber grips add a distinct contact surface on the handle. This combination suits tasks that call for repeated pick-up, placement and adjustment of small components, especially where steady pressure matters more than constant pinching. On a model building table, the tweezers can assist with aligning tiny fittings, shifting delicate pieces into position or handling small detail parts during careful assembly. They also suit electronics and other precision hobby work where access is limited and controlled grip matters across longer sessions. Warning! Not suitable for children under 14 years.
Model-making tools
HG RevAction straight Tweezers, craft tweezers
300074103€22.49
The HG RevAction straight Tweezers use a reversed operating mechanism that changes how small parts are held during detailed hobby work. Squeezing the handle opens the tips, and releasing it closes them, so the tweezers keep hold of a component while the hand can stay more relaxed. This setup is especially useful when a part needs to be held in place for longer moments during model assembly or fine positioning. The straight tip keeps operation simple and direct, with a clear line of sight to the contact point when placing or adjusting small pieces. Stainless steel construction gives the tool a precise, clean-working structure for repeated detail tasks, while vulcanized fiber grips add a distinct handle surface where control matters most. The narrow form also helps when working around compact assemblies, where larger tools can block access or obscure the view of the part being handled. On a workbench, the tweezers suit tasks such as holding tiny components steady, positioning delicate detail parts, or keeping a piece aligned while another step is completed. In model building sessions that involve repeated pick-up and placement, the RevAction layout supports consistent handling with less interruption between movements. Warning! Not suitable for children under 14 years.
Model-making tools
HG Straight Tweezers, craft tool, round tip
300074109€18.49
The HG Straight Tweezers are a steel craft tool made for precise handling in model building and other detailed hobby work. Their straight form and rounded tip support careful pickup, placement and adjustment of small parts, especially where fingertips would cover the work area or make alignment harder. The slim tip profile helps reach confined spots between assembled sections, while the longer body keeps the hand slightly back from the working area for a clearer view. The steel build gives a consistent response during repeated use, whether holding a tiny component in place, shifting a detail by a fraction, or guiding a decal into position. A wide, flat handle section adds control during light pressure changes, which matters when working with delicate pieces that need steady, measured movement rather than force. On a modelling bench, these tweezers fit naturally into tasks such as placing fine detail parts, lifting small pieces from a tray, or making small corrections before adhesive sets. They also suit careful craft and electronics handling where accuracy, reach and a clean grip matter more than bulkier hand tools. Warning! Not suitable for children under 14 years.
Model-making tools
HG Tweezer Grip Scissors, hobby scissors
300074157€28.99
HG Tweezer Grip Scissors bring compact control to close modeling cuts with a push-together action that keeps the hand position clear of the working area. The stainless steel blades are short at about 12 mm, which helps place each cut with accuracy on small surfaces where larger scissors can feel obstructive. The mechanism follows the same grip principle used on the Mini 4WD Curved Scissors in Item 74151, using pressure on the grips to open and close the blades. At 115 mm in total length, the tool stays easy to guide around corners, edges and narrow sections. The blade shape and size suit trimming vacuum molded bodies, cutting decals, shaping stickers and preparing masking tape for paint lines. Stainless steel construction gives the cutting edges a clean, consistent feel across repeated hobby tasks. On a workbench beside a scale model, the compact format fits naturally into detail-focused steps such as body trimming, decal preparation and masking work before painting. Between sessions, the included cap covers the blade area for tidy storage in a drawer, case or toolbox.
Model-making tools
HG Tweezers Grip Tip, precision hobby tweezers
300074155€28.99
The HG Tweezers Grip Tip is a precision stainless steel tool made for handling minute components during static model assembly and R/C model maintenance. Its pronged tip geometry is built to grip small shafts, wire and rounded parts with more control, bringing steadier handling to close, detailed work at the bench. Each tip combines 2 prongs with a central groove, a layout designed to reduce the chance of parts slipping out from the front or the sides while being lifted, aligned or removed. The documented grip examples are concrete: 3 mm diff balls and small-diameter shafts can be held securely, and the tool is suited to assembling and dismantling R/C model gear differential units. Defined grip thresholds add clarity in use, with shafts or wire held sideways from 1 mm diameter, rounded objects from 2 mm diameter, and shafts or wire held lengthways from 1.5 mm diameter. The stainless steel body uses SUS410 material. On a model bench, that means cleaner placement of tiny drivetrain parts, more controlled retrieval of narrow metal pieces, and steadier handling when a fingertip is too large for the space. The slim straight profile also helps when working between closely packed components where direct access is limited. Warning! Not suitable for children under 14 years.
Model-making tools
Long Nose Pliers with Cutter for RC Kit Assembly
300074002€29.99
Long Nose Pliers with Cutter bring precise control to RC kit construction, combining narrow jaws for close access with a built-in cutting edge for wire work at the bench. The tapered nose reaches confined points around small assemblies, helping with gripping, bending and positioning when fingers or broader pliers would block the view. The steel body is made for repeated hobby use, and the polished head pairs with black handles for a clear, workshop-focused layout. Serrated gripping sections near the center of the jaws help hold small parts more securely during adjustment, while the cutter is stated for brass or steel wire used in model and radio control work. This makes the tool useful across several common build stages, from preparing wire lengths to aligning compact components before fastening. On a model bench, the slim profile supports careful handling in crowded areas where accuracy matters more than force. During electronics-related tasks, the same shape helps guide wire ends, hold small fittings and make controlled cuts without switching between separate gripping and trimming tools.
Other accessories
Masking Fluid 20g, model supply, precision bottle
300087229€7.89
Masking Fluid 20g adds a controlled way to cover small sections before paint is applied, especially on uneven or curved surfaces where straight masking tape can be awkward to place. The bottle uses a soft body and a pointed dispensing nozzle, making it easier to guide the fluid onto shaped details, edges and narrow areas with a steady hand. The 20 g format gives a practical amount for repeated use on model painting tasks without taking much space on the workbench. The liquid form suits sections that need a flexible masking layer rather than a cut strip, and the nozzle layout helps place the material exactly where coverage is needed. This makes it useful for painted borders, small clear parts, trim lines and other detailed zones that benefit from careful separation during finishing work. On aircraft, cars, figures or other scale subjects, the bottle can be kept close at hand for touch-up masking and detail preparation between paint stages. It fits naturally into hobby bench routines where shaped surfaces, fine contours and controlled application matter as much as the colour coat itself. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Sticker (5), model masking sheets 240x180mm
300087130€11.491 m² = €51.07
This pack of 5 Tamiya Masking Sticker sheets gives model and craft work a clean starting point for controlled paint application. Each sheet measures 240 x 180 mm, providing enough area to cut broad covers, narrow strips or shaped sections for specific zones on a surface. The flat sheet format suits jobs where ready-cut tape widths do not match the outline that needs to be covered. The masking sheets are intended for painting tasks on R/C models, static models and craft creations. Sections can be cut to follow body contours, panel shapes or small detail areas before paint is applied, helping keep neighbouring sections separate during multi-colour work. The plain yellow sheet form also makes it easy to plan cuts visually before lifting the chosen shape from the backing. For repeated layouts, several matching pieces can be prepared from the same 240 x 180 mm sheet. On model bodies, scale parts or general hobby surfaces, the sheets support custom masking where standard rolls may be less practical. They fit neatly into painting setups that call for sharp edges, blocked sections or individually shaped covers, whether the task is a single accent area or a more complex layered finish. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Sticker, 240x180 mm, model craft sheets
300087129€11.991 m² = €53.29
These masking sticker sheets bring clean coverage and measured cutting to painting work on R/C models, static models and craft creations. Each pack contains 5 sheets, and every sheet measures 240 x 180 mm, giving enough surface for broad masked sections as well as narrow strips cut to size. A printed grid runs across the sheet surface, making it easier to mark out straight lines, repeated widths and consistent shapes before the material is trimmed. That layout is useful when paint schemes call for parallel edges, evenly spaced sections or matched pieces across more than one part. The adhesive sheet format also supports selective coverage on curved or flat areas where only certain sections need to stay clear during painting. On a workbench, the sheets can be cut into long bands for body lines, smaller blocks for detail zones or custom shapes for one-off graphics on model parts and craft builds. The 240 x 180 mm size leaves room to plan several pieces from one sheet, while the 5-sheet pack keeps extra material ready for later colour stages, corrections or a second project. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Tape Sheets, paint masking film 2-pack
300053416€5.891 m² = €61.35
These masking tape sheets bring precise paint control to model finishing with 2 large 200 x 240 mm film sheets that can be marked, cut and applied exactly where a paint boundary needs to sit. The flat sheet format suits custom templates, from long straight separations to curved sections and angled shapes across body panels and other detailed surfaces. The film is intended for masking work in model making and supports sharp, clear paint lines even when a heavier paint application is used. A printed 1 mm grid version is mentioned for the sheet range, making measured cuts possible where that variant applies. For multi-colour paintwork such as camouflage patterns, the film can also be placed on surfaces that have already been painted, allowing layered colour planning without disturbing the coat underneath. After painting, the film lifts away without leaving residue on the masked area. In practical use, the sheets suit custom paint jobs, edge definition and one-off masking shapes that standard roll widths cannot match. Scope of delivery: 2x masking film. Warning! Not suitable for children under 14 years.
Model-making masking tapes
Masking Tape with Plastic Sheeting, 550 mm
300087164€12.99
This masking tape with pre-attached plastic sheeting combines edge definition and broad surface coverage in one roll. When unfolded, the clear sheeting reaches 550 mm width, making it suited to paint work that needs more than a narrow tape line, such as covering larger sections of R/C car bodies during spraying. The tape attaches securely to the surface being covered, helping protect adjacent areas from unwanted paint while keeping the masked line clean and sharply defined. The transparent sheeting extends that protection across a wider area without needing separate film and tape, which streamlines preparation before colour coats or detail work. With a total roll length of 10 m, the material supports repeated use across multiple painting sessions or longer continuous sections. In practical use, the roll can be unspooled along rooflines, side panels or other broad sections where overspray needs to stay contained. It also suits general model finishing tasks that call for a crisp paint boundary and quick coverage of nearby surfaces, then lifts away easily once the painted area is complete. Warning! Not suitable for children under 14 years.
Model-making tools
Mini Bending Pliers for PE, hobby tool
300074084€36.99
Mini Bending Pliers for PE bring controlled shaping to small photo-etched parts where no clear bending line is present. The flat metal tip grips delicate sections securely while helping protect the surface from scratches, so fine details can be adjusted with a cleaner finish during model work. The tool is designed for close, precise handling on etched metal parts that need careful alignment before fitting. Straight lines up to 15 mm can be bent at one time, which helps when working on narrow flanges, tabs and edge sections that benefit from an even fold. When a right-angle bend tends to spring back, the jaw shape supports the section during the bend and makes the angle easier to form without relying on special techniques. Comfortable grips add steadier hand pressure during repeated adjustments and detailed assembly sessions. On the workbench, the pliers suit tasks such as shaping cockpit details, brackets, covers or other fine add-on parts before they are attached to a model. The tool can also be used with other materials such as plastic, giving added utility for small-scale hobby and craft jobs that call for neat, accurate bends. Warning! Not suitable for children under 14 years.
Model-making tools
Model Cleaning Brush Anti-Static, hobby tool
300074078€28.49
The Model Cleaning Brush Anti-Static is a dedicated hobby tool for keeping display models clear of dust, shavings and light debris without crowding delicate surfaces. Its slim metallic handle carries a wide brush at one end and a capped mini brush at the other, giving model care a precise, compact format that sits neatly beside paints, cutters and finishing tools. The main brush uses long fibers to move around raised details, fine edges and fragile assemblies where a cloth or larger duster can catch. Static control is built into the fibers, helping reduce the charge that draws dust back onto freshly cleaned surfaces. The capped mini brush adds a second cleaning option for recessed sections, panel lines and other narrow areas that need a smaller contact point. This 2-way arrangement supports regular maintenance on scale models after building, painting or display. On a shelf, in a cabinet or at a workbench, the brush suits quick touch-ups before photography, after sanding, or during routine display care. It also works on other household objects where light dust settles into small details, with the cap helping keep the smaller brush protected between uses. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler Knife pro Narrowchisel, hobby blade set
300074159€8.49
The Modeler Knife pro Narrowchisel is a replacement blade set for detailed trimming work in confined areas. With 5 narrow chisel blades at 0.55 mm thickness, the set supports controlled removal of small protrusions on flat surfaces where a broader edge can be harder to place cleanly. The slim stepped tip gives the blade a focused contact point for careful cleanup on molded parts. Its narrower format is specifically positioned below the already available 4 mm chisel blade in the range, which makes this version better suited to close-set ribs, recessed sections and other tight spaces on model components. The chisel shape is intended for shaving away excess material rather than piercing, so it lends itself to refining edges, leveling raised marks and tidying mold-related irregularities with measured pressure. The included storage case keeps the blades together between work sessions. On the bench, this blade set fits tasks such as cleaning flat molded panels, refining ribbed structures and removing small surface protrusions before painting or further assembly. It suits model-making workflows that call for a narrow metal edge with more reach into restricted sections than a wider chisel format.
Model-making tools
Modeler Knife Pro Scraper, hobby blade set, 0.5 mm
300074161€8.49
The Modeler Knife Pro Scraper brings a dedicated scraping profile to model finishing work, with 2 blades shaped specifically for changing surface texture and reducing surface thickness in a gradual, controlled way. At 0.5 mm thick, each blade offers a defined edge geometry that suits careful refinement on parts where a standard cutting blade would remove material too abruptly. The scraper-shaped end is intended for pull strokes, drawing the blade toward the body to shave away a selected section of the surface. That motion helps keep adjustments deliberate when refining contours, easing down raised areas or preparing a part for a smoother transition into surrounding detail. Because the blade is built for scraping rather than slicing, it suits tasks where the goal is measured removal across a wider area instead of a cut line. The set format keeps a second matching blade ready for ongoing bench work or replacement. On the workbench, this tool fits naturally into detailing, correction and surface-prep stages between shaping, test fitting and final finishing. It can be used when a panel, edge or molded section needs gradual reduction, or when a plain surface calls for a changed texture before the next build step.
Model-making tools
Modeler Knife Pro Scriber, blade set, 0.4 mm
300074160€8.49
The Modeler Knife Pro Scriber blade set brings fine 0.4 mm scoring to detailed model work, with 5 replacement blades sized for narrow lines and careful surface marking. Each blade is designed for pull-stroke use, so the cutting edge scores the material as it is drawn back, giving a controlled action for panel lines, trimming guides and measured cut paths. Its slim profile is thinner than the Plastic Scriber II Item 74091, which makes this version especially suited to precise, closely spaced detail where a broader groove would look heavy. The blade format also supports score-and-break work on plate material: mark the line, deepen the pass, then separate the section to the required size. That makes the set useful not only for surface engraving but also for shaping custom parts during scratchbuilding and modification work. The 5-piece pack keeps matching blades ready for repeated bench sessions, whether the task is refining engraved detail, preparing clean edges on sheet stock or cutting plate sections for a tailored fit. A storage case is shown in the product presentation for organized handling between uses.
Model-making tools
Modeler's Blade Pro chisel, replacement blades
300074101€8.49
The Modeler's Blade Pro chisel replacement set keeps a precision bench tool ready for detailed surface work with 10 spare blades in one pack. Each blade is 0.55 mm thick, giving the edge a defined profile for controlled chiseling, engraving and cleanup on flat areas where excess material needs to be pared back carefully. The blade format suits tasks that call for a straight, deliberate pass rather than a pointed cut. Raised marks, small protrusions and uneven spots can be worked down with measured pressure, while engraved lines can be refined with a tool shape made for contact across a flat face. The 10-piece quantity supports longer project cycles across multiple builds, touch-ups or finishing sessions without interrupting the workflow when a fresh edge is needed. As replacement blades, they are a practical match for keeping the Modeler's Blade Pro in regular use on the workbench. During model preparation, body cleanup or detail correction, these blades fit naturally into the stages where surface accuracy matters most. They suit careful bench tasks such as refining panel areas, tidying molded excess and sharpening engraved detail before painting or final assembly. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler's Blade Pro Curved, replacement blades
300074100€8.49
Modeler's Blade Pro Curved is a set of 3 replacement blades for fine hobby cutting where a shaped edge matters as much as a sharp point. Each metal blade combines a pointed tip, a curved cutting edge and an oval mounting slot, creating a format suited to careful trimming, guided slicing and close work on thin materials. At 0.45 mm thick, each blade is built for soft fabric materials such as film, cloth and Japanese paper. The curved profile helps the cutting edge track along arcs, corners and narrow outlines with a more natural motion than broad straight cuts. The pointed tip gives added control when starting a cut or reaching into small sections, while the mounting slot supports secure fitting in the matching handle system. The 3-piece pack keeps spare blades ready for ongoing bench work without interrupting a project. On a model making table, these blades suit jobs such as trimming covering film, shaping paper parts or refining cloth-based material with a lighter touch. They also fit craft setups where clean, accurate cuts matter across repeated detail tasks. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler's Blade Pro Straight, hobby knife blades
300074099€8.49
Modeler's Blade Pro Straight brings a focused cutting format to detailed hobby work, with 5 straight replacement blades designed for exact trimming and careful edge work. The 0.5 mm blade thickness supports controlled handling in tight areas where small adjustments and clean lines matter. Each blade is shaped for precise, detailed tasks rather than broad cutting passes, which makes the set well suited to refining parts, cleaning edges and handling close work on model-making projects. The straight profile gives a clear cutting path for measured movements, while the replacement format keeps a fresh edge available across repeated bench sessions. A compact storage case keeps the blades together when not in use and helps separate unused blades from the one currently fitted. On the workbench, the set fits naturally into finishing steps that call for accuracy, whether trimming small sections, tidying cut lines or preparing parts for the next stage. The 5-piece count also makes it practical to keep spare blades ready for ongoing craft and model tasks where a sharp, consistent edge is part of the result. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler's Knife Blade Set, Replacement Blades
300074075€6.49
The Modeler's knife blade set keeps a Modeler's Knife ready for precise cutting with 25 replacement blades stored in a compact plastic container. The pointed metal blade shape is suited to fine trimming work, where a clean edge and close control matter during modelling and craft tasks at the bench. Replacing a worn blade promptly helps maintain the knife's cutting performance and supports neater results on detailed work. The storage case keeps the blades gathered in one place between sessions, so the set stays organised in a drawer, toolbox or hobby area. The pack is focused on the working part that sees regular wear, making it a practical refill for repeated use rather than a one-off accessory. On model building projects, the spare blades are ready for careful trimming, shaping and detail work whenever the current edge starts to dull. In a craft or workshop setup, the container format also helps keep replacement blades together and easy to locate when steady, accurate cutting is needed again.
Model-making tools
Modeler's Knife Mint Green, model tool
300069947€14.49
The Modeler's Knife Mint Green brings a clear, focused cutting tool to detailed hobby work, with a slim hand-held format that suits careful trimming, shaping and preparation on scale builds and craft projects. The mint green finish stands out on the workbench, making the knife easier to locate among cutting mats, sprues, paints and small components during concentrated sessions. Used for fine cutting tasks, this model tool helps create neat edges on masking material, decals and small build parts where accuracy matters. The narrow format supports controlled movement in tighter areas and along short cut lines, which is useful when refining details before painting or final assembly. Its role fits naturally into bench work that involves repeated small adjustments rather than broad cutting passes. The simple, dedicated design keeps the function clear: controlled trimming for model making and related hobby tasks. On a build table, the knife can be kept close at hand for shaping small sections, tidying edges and preparing surfaces between construction and finishing steps. It also fits craft setups where precise hand cutting is needed for detail-led work on compact materials and components. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler's Knife Pro, hobby knife, reinforced handle
300074098€31.49
The Modeler's Knife Pro is built for controlled, detailed cutting, pairing a reinforced handle with a precise blade mount for careful work on hobby materials. The elastomer grip sits securely in the hand, while the metal chuck clamps the blade firmly for steady trimming, scoring and fine shaping at the bench. The set comes with 7 interchangeable blades in 3 profiles: 3 straight blades, 2 curved blades and 2 chisel blades. That mix supports different cutting actions, from long clean slices to shaped cuts around tighter lines and flat-edged trimming where a defined corner matters. A protective cap covers the knife when it is not in use, and a separate spare blade case stores the remaining blades together instead of leaving loose edges on the work surface. The black handle and gold-toned chuck give the tool a clear technical look that matches its workshop focus. On model kits, sheet materials or masking work, the different blade shapes allow close, deliberate cuts where scissors or larger cutters would be less exact. The compact format suits repeated bench use, whether separating small parts, refining edges or cleaning up detail before the next assembly step. Warning! Not suitable for children under 14 years.
Model-making tools
Modeler's Knife, hobby craft knife with 25 blades
300074040€13.99
Modeler's Knife brings precise control to plastic model construction with a medium-size format, a fine pointed blade and a 0.45 mm blade thickness suited to intricate cutting, curving and shaving. The slim profile helps guide the blade into narrow corners, along panel edges and across small surfaces where clean trimming matters. The black handle pairs with a textured metal grip section that supports steady hand placement during close detail work. Alongside the knife, the set contains 25 spare blades for continued use across repeated building sessions. A protective cap covers the blade between tasks, and the blade case keeps replacements together instead of loose on the bench. The presentation image also shows a dedicated handling tool attached to the case for blade management, adding order to routine blade changes. At the workbench, the knife suits jobs such as refining cut lines, shaving excess material from plastic parts and adjusting small details before final assembly. It also fits careful finishing passes where a pointed blade can follow tight contours more closely than broader cutting tools.
Model-making tools
Modeling Drill Chuck, hand tool, 1.5-6.5 mm
300074086€38.99
The Modeling Drill Chuck is a hand-operated bench tool for controlled drilling when a normal pin vise is not enough and an electric drill would be too strong. Its blue handle gives a fuller grip in the hand, making it easier to apply steady turning force while keeping close control over small, precise movements at the work surface. At the front, the black chuck clamps drill bits from 1.5 mm to 6.5 mm, extending the working range beyond very fine pin-vise tasks. That wider capacity makes the tool useful for different drilling steps in model making, from starting larger openings to reworking holes that need a cleaner fit for parts or hardware. The manual format keeps the action direct: the handle is turned by hand, the chuck holds the bit, and the drilling pressure stays closely managed through each rotation. The ribbed section near the chuck also supports a secure hold while guiding the tool tip into place. On a hobby bench, this tool fits the moments that call for more force than a slim precision holder can provide, yet still reward a slower, more deliberate touch than a powered drill. It suits careful work on model assemblies, detail modifications and other fine workshop tasks where control at the bit matters as much as the hole itself. Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Flat Chisel Blade 2mm, hobby tool
300074143€22.49
The Modeling Flat Chisel Blade 2mm is a precision hobby tool for finishing plastic model parts with a clean, controlled cut. Made from high-speed steel, it combines a 2 mm blade width, 2 mm shank diameter and 25 mm overall length in a compact format that reaches small surface details and tight working areas. This blade is intended for final removal work rather than heavy cutting. Thicker protrusions should be filed down first, then the blade can be drawn across the remaining material with the underside kept flush to the plastic surface. That low-angle scraping action helps shave away the last raised trace without digging deeply into the part. It is also suited to spots that are awkward to reach with a modelling knife or side cutters. A storage case is included for keeping the blade covered when not in use. The blade is compatible with Item 74139, the recommended holder, and with Item 74112. On the workbench, it fits naturally into detail-finishing steps such as refining seams, removing small imperfections and preparing surfaces for final abrasive cleanup. Protective goggles should be worn during use because plastic shavings may fly. Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Scissors for PE-Parts Craft Tool
300074068€25.99
Modeling Scissors for PE-Parts bring close, controlled cutting to one of the most delicate stages of model finishing. The compact scissors use 1 cm blades that suit tiny photo-etched sections, making it easier to separate fine metal details cleanly when a standard knife feels less precise on small attachment points. Photo-etched parts in stainless metal can be trickier to handle than standard molded parts, so the tool focuses on the cutting step with a shape made for detailed bench work. The short blades place the cutting point near the fingertips, which helps with careful alignment on narrow tabs and small contours. The tool is intended for precision photo-etched part work and is not meant for thicker surfaces. A special cap is included to cover the blades when the scissors are stored between sessions. On a model bench, the scissors fit naturally into finishing tasks such as preparing grilles, brackets, panels or other fine etched details before filing or shaping. Used as the first step in a photo-etch workflow, they help keep small parts manageable and support a tidier path toward crisp scale detail. Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template Round 1-12.5, scribing template
300074150€9.59
Modeling Template Round 1-12.5 brings controlled circle scribing to model work with a photo-etched stainless steel fret and 3 removable template sheets. The round openings span 1 mm to 12.5 mm in 0.25 mm steps, so small inspection covers, larger access circles and repeated matching details can be laid out with a consistent diameter. The 0.1 mm stainless steel construction keeps the edge fine against the work surface, which helps the engraving needle track the inside of each circle cleanly. On convex parts such as aircraft fuselage sections, the sheets can be bent to follow the shape, with a minimum target component radius of 30 mm stated for curved surfaces. The templates are intended for scribing and engraving PS and ABS resin parts. The fret format also keeps the full size range together between tasks, while the removable sections let the chosen circle sit exactly where the marking is needed. On a bench, the set suits careful layout work before painting, weathering or panel accenting, and it also supports repeat detailing when several matching circles are needed on the same build. Light repeated passes with the needle produce the marked line gradually, giving steady control on flat panels and gently curved shells alike. Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template RR 1-6, hobby scribing guide
300074154€9.99
Modeling Template RR 1-6 brings rounded rectangle scribing into a controlled, repeatable format for detailed model work. The photo-etched stainless steel fret is designed for use with Tamiya engraving needle tools, letting fine lines follow a defined edge instead of relying on freehand marking across small surfaces. The fret contains 3 template sheets with rounded rectangle openings in multiple sizes, spanning 1 mm to 6 mm in width and 1.5 mm to 12 mm in length. That spread supports small access panels, vents, hatches and other surface details where matching proportions matter across more than one part. The smallest opening measures 1 mm x 1.5 mm, while the largest reaches 6 mm x 12 mm, so the same set covers both tight detailing and larger marked features. The 0.1 mm stainless steel construction keeps the edge fine while allowing the sheet to conform to shaped parts. On curved assemblies, the template can be bent against convex surfaces with a minimum target component radius of 30 mm, which makes it useful for aircraft fuselage sections and similarly rounded bodies. It is intended for scribing and engraving PS and ABS resin parts when paired with the matching needle tool, adding a precise guide to bench work focused on clean repeated shapes. Warning! Not suitable for children under 14 years.
Model-making tools
Modeling Template Square 1-10, stencil set
300074156€9.59
Modeling Template Square 1-10 brings repeatable square and rounded-square marking to detailed model work with a photo-etched stainless steel fret designed for fine scribing. The set supports clean layout of access panels, hatches and surface details by giving the engraving needle a precise edge to follow across sizes from 1 mm to 10 mm. The fret contains 4 separate template sheets, and each sheet covers the full size range in 0.5 mm increments. One sheet uses right-angle corners, while the other 3 apply R10%, R15% and R20% corner ratios for rounded-square shapes. That ratio system keeps the corner radius tied directly to the side length, so a 10 mm square at R10% produces 1 mm radius corners. The templates are made from 0.1 mm stainless steel, which helps them sit close to the surface while remaining flexible enough to bend over convex parts. The stated minimum target component radius is 30 mm. On aircraft fuselage pieces, vehicle panels or scratch-built surfaces, the thin metal sheets help transfer matching shapes again and again instead of drawing each line freehand. The graduated openings support both small maintenance-panel details and larger geometric markings, making the set a focused tool for precise, repeatable surface work in model building.
Model-making tools
Needle Nose Pliers with Cutter for Model Work
300074146€39.99
These needle nose pliers combine a long, slim jaw shape with an integrated cutter, giving model work a precise hand tool for gripping, bending and trimming. The chromium-vanadium steel jaws reach into tight areas where broader pliers cannot, which helps when handling small parts on R/C projects, static models and other detailed hobby tasks. Their narrow profile also allows the tool to be used much like tweezers when a part needs a firm hold rather than fingertip contact. At the hinge, the cutting edges add a second workshop function without taking up extra bench space. They cut mild steel wire up to 1.2 mm diameter and brass wire up to 1.3 mm, covering common wire sizes used for detail work, adjustments and scratchbuilding. The long jaw form supports careful bends as well as straight gripping, so one tool can move from shaping wire to placing components in the same session. A twin star logo appears on the hinge joint. The PVC-coated handles provide a non-slip grip that supports controlled pressure during repeated use. On a workbench, beside an R/C chassis or over a partly finished static model, the slim tips help guide the tool exactly where the task is happening, whether that means holding a tiny part, bending brass wire or making a quick clean cut.
Other accessories
Non-Scratch Grips LNP II, model accessory, 2set
300074167€3.19
Non-Scratch Grips LNP II is a model accessory set built around a clear functional detail: a non-scratch contact surface paired in a 2set format. That combination supports handling, replacement and setup tasks where grip is needed but finished parts should stay free from unwanted marks. The LNP II designation identifies this specific version rather than a generic grip, which matters when matching accessories to an existing model setup. With 2 matching pieces in the pack, the set suits applications that need a left and right pair or a direct spare kept ready for later maintenance. The accessory format also makes it easy to store alongside other workshop supplies for regular adjustment sessions. No battery-powered function is involved in the set itself, so the focus stays on the contact surface and the paired quantity. On a model bench, these grips fit naturally into routine replacement work, setup changes or careful handling of finished assemblies. They also suit parts boxes kept for ongoing maintenance, where an exact named version and a matched pair save time during future repairs or refresh work. Warning! Not suitable for children under 14 years.
Model-making tools
Non-Scratch Long Nose Pliers II, hobby pliers
300074166€22.99
Non-Scratch Long Nose Pliers II brings fine control to bench work where standard hand tools can feel too broad. The slim nose shape reaches into narrow gaps, helping with careful wire bends, small-part handling and close-up adjustment work during model making and hobby assembly. The jaw profile is designed for tasks that call for accuracy rather than force. Non-scratch contact surfaces support cleaner handling on delicate components, which is useful when working with soft metal details, shaped wire or finished fittings that need to stay neat while being held or positioned. The elongated nose also improves access around crowded subassemblies, letting the tool approach parts from tighter angles than shorter pliers. For repetitive bench tasks, that combination of reach and controlled grip helps keep movements measured and precise. On a worktable, these pliers fit naturally into build sessions that involve trimming, bending, test-fitting and part placement. They also suit repair and adjustment work on scale models, miniatures and other detailed hobby projects where small components need a steady hold and a lighter touch than general-purpose tools usually provide. Warning! Not suitable for children under 14 years.
Model-making tools
Paint Stirrer Metal, paint tool, 2 stainless stirrers
300074017€6.39
This paint tool set brings controlled colour mixing to bottled paints with 2 stainless steel stirrers, each measuring 15 cm. The slim format reaches into narrow paint jars, while the metal construction gives a firm, direct feel during mixing. At one end, a small spoon shape helps lift pigment and paint from the bottom of the bottle. The opposite flat spatula end supports blending, folding and working different shades together with a more even motion. The double-ended layout gives each stirrer 2 distinct working surfaces for different paint-handling tasks. The spoon tip suits settled colour and denser material near the base of the bottle, while the flat end can spread and combine paint more broadly during shade adjustment. Stainless steel also makes the set suitable for repeated workshop use where clean, precise handling matters. With 2 matching tools in the pack, one stirrer can stay with a current colour while the other is used for the next mix. On the bench, the set fits naturally into model painting, detail finishing and colour preparation before brush work. It also supports mixing custom tones in small quantities when several bottled paints are used in the same session. Warning! Not suitable for children under 14 years.
Model-making tools
PhotoEtched 0.1 mm Saw Blade Set, craft saws
300074094€13.49
The PhotoEtched 0.1 mm Saw Blade Set brings highly controlled cutting to detailed model work, using thin photo-etched metal saws to make extremely fine cuts in small sections and narrow spaces. The slim blade profile helps when a standard hobby blade would remove too much material or struggle to follow a tight line. Each saw features a grip section that can be folded over to increase support while handling the blade by hand. That added structure helps during careful trimming and scribing on PS and ABS resin parts, where a steady hold matters for clean edges and accurate line placement. The set includes 5 saws, giving several blades ready for repeated bench use. The sheet format also shows multiple blade profiles suited to different access angles and cut shapes. For more controlled bench work, the blades can also be fitted to the handle of the Modeler's Knife. This setup suits panel line work, slot cutting, careful separation of molded sections and other detail-focused shaping tasks on scale models. The saws are intended for PS and ABS resin parts and are not for use on metal or hard plastics.
Model-making tools
Plastic & Soft Metal Scissors, hobby tool
300074124€29.99
Plastic & Soft Metal Scissors bring controlled cutting to model making, workshop prep and general craft tasks with anti-rust treated stainless steel blades and a compact 170 mm format. The 40 mm blade length supports close work on sheet materials, while the navy blue grip gives a clear, secure hold during repeated trimming passes. These scissors are designed to handle a broader range of materials than standard scissors. Cutting guidance covers Tamiya Pla-plate up to 1.2 mm, Tamiya Clear Pla-plate up to 0.5 mm, polycarbonate up to 1.0 mm and other plastics up to 1.0 mm. Softer metals are also within scope, including aluminum up to 0.5 mm and copper, brass or nickel up to 0.3 mm. Beyond model materials, the blades can also be used on leather and paper up to 2.0 mm, plus cardboard or rubber sheeting up to 5.0 mm. These figures are intended as a guideline for material choice and cut planning. On the bench, the narrow blades suit body shell trimming, sheet shaping and careful cut lines where bulky household scissors can get in the way. The broad material range also makes the tool useful for mixed-media hobby work, from preparing templates in paper to refining thin metal or plastic parts for custom builds. Warning! Not suitable for children under 14 years.
Other accessories
Plastic Beam 3x3mm SquareTube, model supplies
300070261€7.49
Plastic Beam 3x3mm SquareTube brings clean geometry to scratch-building and model modification, with a square 3 x 3 mm profile that supports straight runs, measured cuts and neatly aligned joins. The 5-piece pack gives builders matching stock for repeated structural work, detail fabrication or replacement sections where consistent dimensions matter. The square tube format is useful wherever a build needs crisp edges and a stable profile rather than a rounded rod. It can be cut to length, combined into frames, used as internal bracing or adapted for custom details on scale models and workshop projects. Because each beam shares the same section, layouts stay uniform across multiple contact points and parallel structures. The compact profile also suits confined spaces where larger stock would crowd surrounding parts. On a bench, these beams fit naturally into measured fabrication work, from reinforcing a body support to creating small structural inserts and straight-edged custom features. They also serve well in repair jobs where a damaged section needs replacement with matching square stock. Since batteries are not included, no battery-related function applies to this model supply.
Other accessories
Plastic Beam 5x5mm SquareTube, model supply
300070262€7.49
Plastic Beam 5x5mm SquareTube brings a clean square profile to model building, with 5 x 5 mm dimensions that suit structural additions, fabricated frames and custom detailing. The pack contains 4 matching beams, giving consistent stock for repeated cuts and balanced left-right sections in scratch-built work. The square tube format offers straight edges and an even cross section that help when planning measured joins, supports and boxed shapes. In contrast to narrower strip material, this profile can define corners and framed sections with more visual presence. The identical beam size across all 4 pieces supports tidy geometry when a build calls for parallel members, repeated lengths or matching braces. The compact format also makes the material easy to combine with other model supplies in conversions, diorama structures or workshop modifications. On the bench, these beams suit careful trimming, test fitting and placement in areas where a hollow square section gives the right look or structure. They work well for custom projects that need clean lines, repeatable dimensions and a straightforward base for fabricated details in scale scenes or model assemblies.
Other accessories
Plastic Beam 8x8mm SquareTube, model supply
300070263€7.49
This set of Plastic Beam SquareTube parts brings a clean 8 x 8 mm profile to scratch-building, structural detailing and custom model work. With 3 matching beams in the pack, it supports measured cuts, repeated sections and tidy alignment across frames, supports or fabricated add-ons where a square cross section is needed. The tube format opens up more than one use within a build. It can serve as a visible framework element, a hidden spacer, or a base for adapting other parts around a consistent shape. The plastic material is easy to integrate into many modelmaking workflows where straight edges, even dimensions and repeatable lengths matter. The 8 x 8 mm section also gives a clear reference when planning fit around body panels, scenery elements or workshop-style structures. On the bench, these beams suit custom projects, repairs and one-off conversions that call for simple geometry and clean lines. They also work well as stock material for keeping matching sections ready for later adjustments, replacement pieces or parallel fabrication tasks within the same modelmaking setup. Warning! Not suitable for children under 14 years.
Model-making tools
Plastic Model File Flat 6mm, hobby hand tool
300074069€23.49
This flat model file combines a narrow 6 mm working width with wave pattern teeth for controlled shaping and a clean surface finish on small parts. The tooth pattern is designed to keep shavings from clogging the filing face, so the cut stays consistent while seams, edges and formed sections are refined by hand. The conventional flat shape suits a wide range of model-making tasks where a broad abrasive block would reach too far. Its slim metal filing section can be guided along straight runs, pressed into tighter areas and used to level raised material with measured strokes. The long handle adds a steady grip for careful pressure control, which helps when adjusting fit, cleaning part lines or preparing surfaces for the next finishing step. On the workbench, this file fits naturally into plastic model building, detail correction and general hobby finishing. It can be used between trimming and final surface preparation, or kept close for repeated touch-ups as individual parts are shaped and checked during assembly. Warning! Not suitable for children under 14 years.
Model-making tools
Plastic Scriber II, hobby tool with spare blades
300074091€11.79
Plastic Scriber II is a dedicated hobby tool for scoring and cutting plastic sheets, with a hooked blade shape that supports controlled line work on model materials. On the workbench, that focused cutting action helps start clean guide lines for trimming, reshaping and other detailed modification tasks. Beyond sheet work, the tool is also intended for creating mold lines on model parts and for modifying Mini 4WD machines. The blade can be retracted after use, which keeps the edge covered when the tool is set down between steps or returned to storage. Two spare blades are stored inside the handle, so replacements stay with the tool instead of getting lost among other bench supplies. The handle itself keeps the core parts together in one compact format suited to repeated workshop use. During model preparation, Plastic Scriber II fits naturally into jobs such as marking cut paths, refining part surfaces and adjusting small sections that need a more exact line than a general craft knife can provide. It also suits bench setups where compact tools and stored spares help keep detailed work moving without breaking concentration. Warning! Not suitable for children under 14 years.
Model making accessories – make your hobby even more fun!
In addition to patience, know-how and model making skills, you’ll also need a set of tools in order to get the most out of your model. When it comes to model making, every little detail needs to be implemented with perfection – something which is only possible with the right model making accessories.
Finding the right model making accessories
The model making accessories you will need will depend on your own expectations and aims, as well as the model you are working on. There are many different options – from glues and sanding materials for assembly to paints, brushes, masking tapes and decorations for creating your own unique and individual designs, we have everything you’ll need for your model-making projects.
Overview of Tamiya model making accessories
If you’re an experienced model maker, you’ll know how important it is to have a set of premium model making accessories. With our extensive range, we have everything that you need to make your creative spirit run wild:
Model-making tools
A set of functional and practical accessories is indispensable for model making enthusiasts. Accessories include tweezers, pincers and scissors, drill bits, files, blades, engraving tools and cleaning utensils. If you’re looking to get kitted out with the right tools, take a look at our model-making tools in our online store, where you can choose from a wide range of premium products.
Model-making glues
Glues play a crucial role in model making – in addition to being easy to handle, they must also provide a strong and reliable bond. Our range of model-making glues contains numerous different glues and adhesives for specific materials (e.g. plastic) to ensure that your model stands the test of time.
Model-making masking tapes
If you want to paint your model, masking tape is a must. These strips of adhesive tape help to ensure a clean coat of paint and allow you to work with precision. Our selection of model-making masking tapes contains a range of strong and wide tapes, including tapes which are suitable for working on curves and round shapes.
Model-making abrasive materials
For many models, sanding is an essential part of the assembly process. Our range of model-making abrasive materials includes an extensive selection of high-quality sanding paper, sanding sponges and other sanding accessories – all at reasonable prices.
Other model making accessories
In the Other accessories category, you will find a diverse range of other practical accessories such as plastic plates, beams and cotton swabs (industrial quality with tightly spun tips).
Model making accessories – create your very own masterpieces!
Whether you’re looking for high-performance glue, sanding materials or practical tools, we have everything you need to create your own masterpieces – all with uncompromising quality and performance. Check out our model making accessories and get inspired.