Catégories

Maquettes de véhicules militaires 1/35

1:35 WWII Ger.20mm Flakvierling 38

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38   Warning! Not suitable for children under 14 years.

Maquettes de voitures 1/24

Nissan Silvia K's

€18.99

Maquettes de motos 1/12

1:12 Ducati Superleggera V4

€55.99

Article number: 300014140 Product: 1:12 Ducati Superleggera V4 Tamiya is proud to announce the release of the Superleggera V4 as a new addition to our 1/12 Motorcycle Series. The Superleggera V4 is a road-legal version of the Panigale V4 produced by the legendary Italian motorcycle manufacturer, Ducati. This motorcycle’s cornerstone is the lightening facilitated by carbon fiber material in the fairings, chassis and swing arm, and its eye-catching design features the distinctive carbon fiber biplane wings on either side of the front cowl for aerodynamics. The engine is the Desmosedici Stradale R, a 998cc V4 powerplant with Ducati’s Desmodromic valve timing system. This motorcycle also uses Öhlins suspension and Brembo brake system. In addition, installation of the Akrapovič titanium muffler – which is for the racing kit – with a dedicated engine part results in a superb power/weight ratio of 1.54hp/kg. Do not miss this great chance to get our assembly kit model of this rare super-bike; only 500 of the full-size motorcycle were produced. Kit model, scale 1:12, Street Version, engine, frame, fairing, racing motorcycle stand, semi-slick tires, exhaust system, instructions, decal, Length 176mm.

Maquettes de voitures 1/24

1/24 Mercedes-AMG GT3

€64.99

Article number: 300024345 Product: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model.   Warning! Not suitable for children under 14 years.

Maquettes de motos 1/12

1:12 Ducati 916 Desmo. 1993

€35.99

Article number: 300014068 Product: 1:12 Ducati 916 Desmo. 1993 About the Ducati 916 Ducati, the renowned Italian motorcycle manufacturer, is highly regarded by motorcycle enthusiasts the world over. Their current top-of-the-line "916" bike was unveiled to the public during the 1993 Milan Motor Show. In recent years, Ducati has been a dominant force at the World Superbike Championships. Their 916 was developed using the latest racing technology and expertise, and became a very effective base machine fore these Championships. Its 114 horsepower, 916cc, liquid cooled L-twin cylinder engine uses a computer controlled fuel injection system and Ducat's traditional Desmodromic valve operation system. This valve system uses cam mechanics for both opening and closing the valves, while a conventional system closes the valves with springs only. This powerful engine is mounted in a light weight and extremely rigid, chrome molybdenum steel tubular frame. The rear swing arm suspension uses a mono-arm for quick tire changing during competition. Showa's shock absorbers and Brembo brake calipers are used at both ends. The 916 has a 2-stage adjustable caster offset system. Its aerodynamic cowl design is very distinctive, differing from other racer-replica bikes. The front cowl has engine air intake openings and mounts the dual headlamps. The fuel tank is ergonomically sculptured to fit the rider's varying posture during hard riding. The 916 is a true street legal racing machine on the leading edge of performance and styling.     Warning! Not suitable for children under 14 years.

Maquettes de voitures 1/24

1:24 Porsche Turbo 1988 Roadversion

€35.99

Article number: 300024279 Product: 1/24 Porsche Turbo 1988 Streetversion Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbos impressive design and performance made it the most well known member of the 911 series. About the Porsche 911 Turbo The 911 Turbo debuted in 1975 as Porsches first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbos distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII Ger.7,5cm An.Tank Gun(PAK) (3)

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

Véhicules pour route / Onroad RC (2WD/4WD)

1:10 RC XV-01 Lancia Delta HF Integrale

€285.00

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Maquettes de voitures 1/24

1:24 Mercedes Benz SL300 Gullwing

€60.99

Article number: 300024338 Product: 1:24 Mercedes Benz SL300 Gullwing The Mercedes-Benz 300SL joins the 1/24 Sports Car Series as it is considered an all-time classic in the automotive world. The real car began life as a prototype for the German motor giant’s works racing team, taking part in international races, and in 1954 a production version debuted at the International Motor Show in New York. Despite nominal road car status the 300SL was still a very racy vehicle and proved popular, particularly in the United States. It possessed a 3-liter engine (hence the 300 in its name), and a highly lightweight body (SL stands for Sport Leicht, lit. "light sports") with striking gull wing doors. 1,400 cars were produced by the end of its production run in May 1957. The Tamiya model kit captures the real life subject down to the working Gull-Wing doors and complex tubular space frame. Productdetails: - This is a 1/24 Scale plastic model assembly kit. - The elegant form of this classic is breathtakingly captured by the model, and includes opening engine hood and gull wing doors. The doors can be locked in open position using a small strut. - Opening the hood reveals the faithful depiction of the engine. Hood can also be locked in open position. - The complex tubular space frame – one of the signature points of the car – is elegant recreated. - Nylon mesh is included to recreate the front air intake - Numerous metal-plated parts recreate side bars, bumpers and more. - Comes with masking stickers for use when painting the model. - Metal transfers are included in the kit to depict mirror surfaces and emblems. - Features newly-designed tire parts.   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 Bundeswehr Flak-Panzer Gepard (1)

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.   Warning! Not suitable for children under 14 years.

Figurines et accessoires militaires 1/35

1:35 WWII Fig.-Set Ger. MG Troops (7)

€7.19

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.   Warning! Not suitable for children under 14 years.

Véhicules tout-terrain / Offroad RC

Mercedes-Benz G 500 (CC-02)

€295.00

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

Buggys RC (2WD/4WD)

The Grasshopper II (2017)

€120.00

Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Véhicules tout-terrain / Offroad RC

1:10 RC Bronco 2021 Painted (CC-02)

€310.00

Article number: 300047483 Product: 1:10 RC Bronco 2021 Painted (CC-02) Tamiya is proud to announce the release of the Ford Bronco 2021 as our new R/C model on the cross country CC-02 chassis. The Ford Bronco has been sold since 1966, and the Ford Bronco 2021 was announced as the sixth generation model in 2021, 25 years since the last generation’s release. This car employs 2.3-liter inline-4 engine (standard) or 2.7-liter V6 engine (option). The model depicts the 2-door type’s top grade First Edition model. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Buggys RC (2WD/4WD)

1:10 RC Wild One OR Blockhead Motors

€270.00

Article number: 300058695 Product: 1:10 RC Wild One OR Blockhead Motors

Véhicules pour route / Onroad RC (2WD/4WD)

1:12 RC Golf Racing Gr. 2 (M-05)

Article number: 300047308 Product: 1/12 RC Golf Racing Gr. 2 (M-05) Tamiya is delighted to announce the re-issue of this classic model, which was last offered to you in late 2015. The Volkswagen Golf Mk.1 was a veteran of European touring car racing, and the Kamei-sponsored car with its distinctive livery ran in the low-modification Group 2 class. Fun and maneuverability are the order of the day with this on-road racer, which makes a welcome reappearance in the M-05 chassis series line-up. About the Model • This is a 1/12 scale R/C model assembly kit. Length: 329mm, width: 175mm, height: 120mm. • The racing Golf’s form is captured expertly by the lightweight and durable polycarbonate body. • The M-05 Chassis is a lightweight unit with a low center of gravity. • Servo, receiver and ESC are positioned at the rear to provide an excellent sense of balance. • 3-piece steering linkage provides stable high-speed cornering. • Features a wheelbase of 210mm. • Stylish gold color wheels are paired with M-Chassis slick tires. • Marking stickers are included to decorate the car, as are stickers for masking when applying the paint job. • A whole range of Hop-Up option parts are available to tune your M-05 chassis.

Maquettes de voitures 1/24

1:24 NISMO Skyline GT-R Z-tune (R34)

€38.49

Article number: 300024282 Product: 1/24 NISMO Skyline GT-R Z-tune (R34) Tamiya has created an all-new mold to produce the body for this 1/24 scale NISMO GT-R Ztune. JGTC Champion team NISMO has turned its skills towards producing the ultimate road car, and we thought it was only right to do it justice with a truly excellent model. About the GT-R Z-tune The NISMO team took a Nissan Skyline GT-R (R34) base and hand-built it into a totally customized supercar. The resulting GT-R Z-tune made a huge splash during its unveiling at the 2005 Tokyo Auto Salon. Upgrades to internal mechanics include the souped-up 2.8L twin turbo engine with 500hp output, Sachs special suspension system and brakes jointly designed with engineers from Brembo. The lightweight carbon body features front bumper spoiler, hood with louver, side skirt and rear underspoiler. Full of racing-spec parts while featuring excellent power and handling, NISMOs Z-tune has been called the ultimate road-going car, combining luxury with superior performance.   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 Bundeswehr Leopard 1A4 (1)

€23.99

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★ From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★ Notable details include the MG3 machine gun and searchlight. ★ Comes with a commander figure to add even more detail to your finished model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Figurines et accessoires militaires 1/35

1:35 Diorama-Set Brick Wall (22)

€5.49

  Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 Dt. Pz.Kpfw. IV Ausf.G Frühe.Prod.

€56.99

Figurines et accessoires militaires 1/35

1:35 WWII Diorama-Set Ger.Weapo.Inf.(24)

€5.29

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.   Warning! Not suitable for children under 14 years.

Figurines et accessoires militaires 1/35

1:35 WWII Fig.-Set Ger.Tank Grenadie.(8)

€7.19

Article number.: 300035061 Product: 1:35 Figure Set German Pz Grenardiere (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII Ger. PzKpfw. IV Ausf. D (3)

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

€20.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

Maquettes d’avions 1/48

1:48 WWII Messerschmitt BF109E-4/7 Trop

€28.99

Article number: 300061063 Artikelbezeichnung: 1:48 Ger. Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included.   Warning! Not suitable for children under 14 years.

Buggys RC (2WD/4WD)

Plasma Edge II (TT-02B)

€150.00

Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Maquettes de motos 1/12

1/12 Yamaha YZF-R1M

€49.99

Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.　

Véhicules tout-terrain / Offroad RC

1:10 RC Ford Bronco 2021 (CC-02)

€295.00

Article number: 300058705 Product: 1:10 RC Ford Bronco 2021 (CC-02) Tamiya is proud to announce the release of the Ford Bronco 2021 as our new R/C model on the cross country CC-02 chassis. The Ford Bronco has been sold since 1966, and the Ford Bronco 2021 was announced as the sixth generation model in 2021, 25 years since the last generation’s release. This car employs 2.3-liter inline-4 engine (standard) or 2.7-liter V6 engine (option). The model depicts the 2-door type’s top grade First Edition model. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Véhicules pour route / Onroad RC (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02

€135.00

Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Véhicules pour route / Onroad RC (2WD/4WD)

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

€235.00

Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.   Warning! Not suitable for children under 14 years.

Véhicules tout-terrain / Offroad RC

1:10 RC XV-02 PRO Chassis Kit

€375.00

Article number: 300058707 Product: 1:10 RC XV-02 PRO Chassis Kit Tamiya is proud to announce this shaft-driven 4WD chassis kit for rally cars, an addition to the XV chassis series that will be a popular addition to the R/C rally series. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Maquettes de voitures 1/24

1:24 Calsonic Skyline GT-R (R34)

€28.99

Article number: 300024219 Product: 1:24 Calsonic Skyline GT-R (R34) The unrivaled Nissan Skyline GT-R of the 1970's Japanese touring car races valiantly returned to the race circuit in 1990. Equipped with 2.6l, inline 6-cylinder twin turbo engines, two R32 Skyline GT-R's brilliantly triumphed in all six races. Particularly impressive was the bright blue Calsonic Skyline, which achieved five of the six victories to take the series championship. In 1993, the Calsonic Skyline was converted into a GT machine and brought out for the All Japan GT Championships, where it took top honors for three years running. From the middle of the 1995 season, the R33 version of the Skyline GT-R was brought out. The R33 was based on the 4WD production car, but was instead equipped with rear wheel drive. For the 1999 All Japan GT Championships, Nissan brought out a new machine, the R34. Compared to its predecessor, the R33, the R34 was constructed more compactly, with a narrow wheelbase. It was developed to take advantage of the reinforced chassis used on the production model brought out in January of that year. Except for the roof, the body was completely remade in carbon fiber and equipped with a large, curved wing on the rear- just one example of its aerodynamic and stylish form. Undergoing constant improvements since 1990, the inline, 6-cylinder DOHC twin turbo engine of the R34 is maximized with a 6-speed sequential transmission and rear wheel drive. The latest incarnation of the Skyline GT-R, the R34, promises to add more GT Championship Titles to Nissan's illustrious racing history. Calsonic GT-R (R34)

Maquettes de voitures 1/24

1:24 Castrol Toyota Tom´s Supra GT

€26.99

Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season.   Warning! Not suitable for children under 14 years.

Maquettes de voitures 1/24

1:24 Porsche 934 Jägermeister

€52.99

Article number: 300024328 Product: 1/24 Porsche Turbo 934 Jägermeister The Porsche Turbo RSR 934 was a descendent of the world-famous Porsche 911 Turbo, and appeared for the first time in the Group 4 GT class in 1976. The rear-mounted 2,994cc turbocharged flat-6 engine was capable of 260hp, making it a top-of-the-line production car at the time. This model, covered in the famous Jagermeister livery, sped to victory in both the European GT Championship and the German Sports Car Championship in its debut season. The Tamiya assembly kit model faithfully captures all the details of this famous racing car in 1/24 scale. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Maquettes de voitures 1/24

1:24 Subaru Impreza WRC '99

€27.99

Article number: 300024218 Product: 1:24 Subaru Impreza WRC '99 The 1997 World Rally Championships saw a relaxing in the rules pertaining to vehicle modification. Subaru was the first team to take advantage of the leeway, bringing out the Impreza WRC. That machine featured all aluminum horizontal four cylinder turbo engine paired with a vertically mounted gearbox. The layout placed the gearbox in a balanced position behind the front axle, heightening manerverability and ultimately contributing to a Mnufactures Championship for that year. The bulk of the improvements to the 1999 model centered around the engine and gearbox. Foremost was the adoption of an electronically controlled throttle system. This system converts the position of the throttle in to electronic signals, heightening throttle response. The Impreza WRC was also equipped with a 6-speed, semi-automatic gearbox. This system enables sudden shifting, such as from 6th to 1st gear. Work is also continuing on the development of an electronically controlled damper system. The Impreza WRC is driven by J. Kankkunen, R. Burns and B. Thiry. Kankkunen and Burns finished in 1st and 2nd place respectively at both the 7th Argentina Rally and the 10th Finland Rally. The 8th Acropolis Rally was also taken by Burns, setting the scene for an intense contest in the latter half of the season.

Figurines et accessoires militaires 1/35

1:35 Diorama-Set Allied Vehicle Access.

€11.99

Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced.   Warning! Not suitable for children under 14 years.

Figurines et accessoires militaires 1/35

1:35 Diorama-Set Livestock (18)

€8.39

Article number: 300035128 Product: 1:35 Diorama-Set Livestock (18) Add an extra layer of authenticity to your diorama with this comprehensive set. It contains parts to depict a mule (x1), dog (x1), calf (x1), pig (x1) and piglets (x3), roosters (x2), hens (x2), chicks (x3), eggs (x6), geese (x2) and rabbits (x2).   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 US Med.MBT M48A3 Patton (2)

€27.99

Article number: 300035120 Product: 1:35 US Med.MBT M48A3 Patton (2) This is a 1/35 scale plastic model kit of the American M48A3 Patton tank, which served with distinction during the Vietnam War. ★The tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet is accurately reproduced. ★Details such as the searchlight and machine gun cupola are also brimming with realism. ★The kit includes accessory parts such as an engine exhaust snorkel, jerry cans, and spare track links as well as 2 tank crew figures.

Figurines et accessoires militaires 1/35

1:35 WWII Fig.-Set Ger. Assault Tro. (8)

€7.19

Article number: 300035030 Product: 1:35 WWII figure set German. infantry (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Figurines et accessoires militaires 1/35

1:35 WWII Ger.Jerry Can Set (12) Early

€6.99

Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base.   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII Ger.SdKfz.171 Panther A (2)

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII SdKfz.171 Panther G Late V.(2)

€46.99

Article number: 300035176 Product: 1:35 Ger. SdKfz.171 Panther G Late V.(2) A constant threat on account of its refined design, the Panther was a feared opponent for enemies of the German Army. In fact, a number of Panther variants were produced and perhaps the most refined was the late version of the Type G, which is recreated by this plastic model assembly kit. The model breathtakingly recreates the form of the tank, from the well-armored mantlet to the exhaust flame dampers for night combat, and right down to details such as the heater air intake. Of course, typical late production variant additions such as turret-top parts are all there, as are 2 figures in realistic pose, plus 3 marking options recreating Ardennes Front unit Panthers. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII SdKfz.181 PzKpfw.VI Tiger I E

€52.99

Article number: 300035146 Product: 1:35 Ger. SdKfz.181 PzKpfw.VI Tiger I E During WWII, the German Tiger I was greatly feared by Allied forces for its thick armor and powerful 88mm gun. This is a 1/35 scale plastic assembly kit model of the German Tiger I late production variant which was put in production from January 1944 and appeared on the Normandy front. Features of the late production variant of the Tiger I, including the distinctive silhouette, the powerful 88mm gun, periscope on commander's cupola, and pressed steel wheels, have all been realistically reproduced. In addition, shell loading area in the turret as well as hatch undersides have detailed finish. Kit includes two types of gun barrels and gun mantlets to enable to build the last production variant model. Furthermore, one commander figure also included. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1:35 WWII US 2.5to Cargo Truck GMC (1)

€43.99

Article number: 300035218 Product: 1:35 US 2.5to Cargo Truck (1) During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish. The model depicts the doors which had canvas parts and its cargo area with the covers removed to allow you to recreate a commonly seen scene of WWII. Five kinds of markings and a seated driver figure are included.   Warning! Not suitable for children under 14 years.

Maquettes d’avions 1/48

1:48 Fairchild Republic A-10A Thunder.II

€38.49

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.   Warning! Not suitable for children under 14 years.

Maquettes d’avions 1/48

1:48 Ger. V-1 Fiseler Fi103

€14.49

Article number: 300061052 Product: 1:48 Ger. V-1 Fiseler Fi103 Powered by a pulse jet engine, the unmanned V-1 flying bomb developed by Germany during WWII would reach speeds of 640km/h, fly a certain distance, then crash and explode. This kit reproduces the simple form of this weapon and also includes parts to depict a transport trolley.

Maquettes de motos 1/12

Honda CB750F

€24.99

Article number: 300014006 Product 1:12 Honda CB 750F The Honda CB750F Motorcycle appeared on the Japanese market in June 1979 and was shortly to become the best seller in the 750 class. Just ten years prior to their 750F release, Honda opened up the field of multicylinder bikes with their now famous four cylinder CB750. Honda had won several Grand Prix motorcycle races with multi-cylinder bikes, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power, and so shocked the industry that shortly many of the famous makers produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their "Z" series DOHC 4 cylinder 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB750K DOHC with four valves per cylinder, a powerful 68hp, and new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F which had been copied from their racing RCB bike. This styling was new to stock motorcycles in the world. With the low positioned handle bars and rear positioned foot rests, allowed a "slouched" riding position. The style is setting the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, semi-air front suspension system, and FQV damped rear coils. Braking utilizes the dual piston caliper system, with dual discs in front and a single disc at the rear. A newly designed racing type front fender with spoiler has proved to be very popular among the bike enthusiasts. The overall styling of that unveiled in 1979, with the smooth flowing lines from tank to tail light have been retained, and it is likely that this fine motorcycle will stay at the forefront of sales for years to come. Honda CB750F

Véhicules pour route / Onroad RC (2WD/4WD)

Impreza Monte-Carlo 99 (TT-02)

€165.00

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Véhicules pour route / Onroad RC (2WD/4WD)

Mercedes-AMG GT3 (TT-02)

€160.00

Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Buggys RC (2WD/4WD)

The Grasshopper'05 Candy Green

€110.00

Article number: 300047348 Product: 1:10 RC The Grasshopper 2005 Candy Green Tamiya welcomes a further limited edition re-issue of the Grasshopper Candy Green Edition - the latest production was in 2021. Included: 2WD assembly kit, Vintage Re-Release Length: 389mm, ESC included, pre-painted ABS Body in Candy Green WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Maquettes de motos 1/12

1/12 CBR1000RR-R FIREBLADE SP

€52.99

Article number: 300014138 Product: 1:12 Honda CBR 1000-RR-R Fireblade SP The Complete Package Announced in 2019, the CBR1000RR-R FIREBLADE SP is a stunning triumph of motorcycle design with a highly circuit-oriented feel, yet providing an accessible ride to road-going owners. There is plenty of race technology borrowed from the RC213V MotoGP bike, a class-leading 217.5hp engine, and state of the art electronics that assist with many aspects of the bike including its suspension. It is adorned with aerodynamic honed cowls, highlighted by triple interior fairing winglets in the side cowls. The Honda works Team HRC is planning to enter the 2020 SBK championship using a bike based upon this masterpiece. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 176mm, width: 68mm, height: 96mm. ★The aerodynamically honed form of the bike is captured in style, including renderings of the internal winglets in the side cowls. ★Features a detailed depiction of the class leading liquid cooled 4-cylinder engine.<br ★Engine, swing arm, front fork and muffler are screw-attached to the model frame. ★Has screw-attached headlight. ★Side and under cowl can be removed after completion of assembly. ★Metal plated parts are used for mirror surfaces. ★Tires have realistic texture and tread patterns. ★Comes with two marking options, masking stickers and a racing stand. Kit model, scale 1:12, Street Version, engine, frame, fairing, racing motorcycle stand, semi-slick tires, exhaust system, instructions, decal, Length 176mm. Suitable Front fork Set 300012690.

Maquettes de motos 1/12

1/12 Repsol Honda RC213V '14

€57.99

Article number: 300014130 Product: 1/12 Repsol Honda RC213V '14 This model depicts the RC213V run by the factory-works Repsol Honda team in 2014 MotoGP. It was a momentous season for the team and for young sensation Marc Marquez. Marquez's 2014 season was sublime as he absolutely dominated with 13 wins and contributed to the Riders', Constructors' and Team Championships. The RC213V debuted in 2012 with new engine size regulations stipulating a maximum of 1,000cc. It features an aluminum double-tube frame and powerful 1,000cc Honda 4-stroke V4 with pneumatic valve system. The seamless transmission saves valuable power during shifts, while other hi-tech features include traction control, an anti-wheelie system, and engine braking control.   Warning! Not suitable for children under 14 years.

Maquettes de voitures 1/24

1/24 Campus Friends Set II

€29.49

Article number: 300024356 Product: 1:24 Fig.-Set Campus Friends II 1983 saw the release of the original Campus Friends Set, a collection of five figures and a scooter that was most useful to modelers given the adaptability of the figures to a range of accompanying models. Now, we have brought that concept into the modern day: newly-scanned figures are paired with a range of accessories more appropriate to the 2020s, with plenty of options to choose from. About the Model • This is a 1/24 scale plastic figure assembly kit. • Parts are included to create five figures (four female, one male); they were designed using cutting edge 3D scanning techniques to recreate subtle details such as creases and wrinkles in clothing. • Natural poses include a figure taking a selfie, and more. • The male figure and one female feature a choice of head parts; two more female figures have a choice of right arm components. • Modern accessories include guitar case, coffee cup, smart phone, and various bags. • Makes a great partner for models in the extensive Tamiya 1/24 Sports Car Series.

Figurines et accessoires militaires 1/35

1/35 German Tank Crew Set

€19.99

Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits.   Warning! Not suitable for children under 14 years.

Maquettes de véhicules militaires 1/35

1/35 Panther Ausf.D

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.   Warning! Not suitable for children under 14 years.

Maquettes d’avions 1/48

1/48 Bf109 G-6

€49.99

Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

Maquettes d’avions 1/48

1/48 Spitfire Mk.I

€43.99

Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

Buggys RC (2WD/4WD)

1:10 RC 1st Try Plasma Edge II L/G TT02B

Article number: 300057988 Product: 1:10 RC 1st Try Plasma Edge II L/G TT02B Tamiya is delighted to announce a great option for R/C beginners – a new product pairing the First Try kit version of the TT-02B offroad chassis, with a flashy painted Plasma Edge II body (Item 47454). Users can still enjoy the informative and rewarding process of building a Tamiya chassis, but with some of the trickier sections pre-assembled. The TT-02B is a highly adaptable and beginner-friendly chassis itself, with 4-wheel double wishbone suspension and shaft-driven 4WD giving great performance onand off-road.

Véhicules pour route / Onroad RC (2WD/4WD)

1:10 RC Ford Escort Custom (TT-02)

€155.00

Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Buggys RC (2WD/4WD)

1:10 RC Neo Fighter Buggy DT-03

€96.99

Article number: 300058587 Product: 1:10 RC Neo Fighter Buggy DT-03 The Neo Fighter Buggy is mounted on the easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering.   Warning! Not suitable for children under 14 years.