RC Cars

On-road RC cars (2WD/4WD)

1:10 Motul Autech GT-R, RC assembly kit, TT-02

The 1:10 RC Motul Autech GT-R assembly kit brings the shape of the 2014-spec NISMO GT-R to the workbench in a form built for running as well as display between sessions. Its polycarbonate bodyshell captures the low, sleek lines of the Super GT GT500 machine, linking a championship-winning race car to a chassis made for regular RC use. At the centre of the kit is the TT-02 touring car chassis, the successor to the TT-01 and an entry-level platform developed to make assembly more approachable for new RC builders. The shaft-driven layout gives the car a clear mechanical base, while the included TBLE-02S electronic speed controller works with brushed and brushless setups. A 540 electric motor is supplied for the standard drive package, so the core drivetrain is already matched to the chassis concept. Tamiya also positions the TT-02 as a platform with room to grow, with compatible Hop-Up Options available for later tuning and setup changes. Once assembled, the model suits open runs on parking lots and laps on prepared circuits, where the touring car format and race body styling feel most at home. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:12 Midnight Pumpkin Metallic/Chrome, RC kit

Midnight Pumpkin Metallic/Chrome brings classic 1950's pick-up truck styling into a 1:12 RC assembly kit with a bold black metallic body and silver-plated wheels. The oversized tyre setup gives the model its unmistakable stance on the track, while the plated body sections create a bright contrast against the darker finish. The chassis uses an ABS box-type frame and a 14.7:1 gear ratio, combining a compact layout with gearing tuned for lively running. Front independent swing axle suspension and a rear rolling rigid setup shape how the model handles direction changes and uneven surfaces. A 540 Type motor is included, and an electronic speed controller is supplied to manage acceleration input during driving. Parts H and J, together with the body, are finished using a vacuum plating technique that sets this version apart visually from the original release. A wheelie bar is included for upright stunt runs, adding another driving mode beyond regular laps and straight-line passes. Radio gear, a battery pack, a charger and paints are required separately. On a home track, in a hobby room, or during club running sessions, the combination of retro truck proportions, plated details and wheelie-ready setup gives this model a strong visual presence in motion.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 MB G-Class G500, RC assembly kit, CC-02

€294.99

The 1:10 MB G-Class G500 RC assembly kit pairs the upright presence of the 2018 G-Class with the trail-focused CC-02 platform. Its polycarbonate body captures the square proportions of the full-size vehicle, and the separate front grille, side mirrors and spare wheel cover give the shell more defined exterior detail when the model is finished. At 455 mm long, 196 mm wide and 207 mm high, the model has a substantial stance, while the 267 mm wheelbase supports balanced proportions on the chassis. The 4WD drivetrain places the motor longitudinally behind the front axle and uses a separated gearbox and transfer case with propeller shafts to drive the front and rear differential gears. Tuning options go further with 20 possible gear ratios from 11.09:1 to 29.28:1 when separately sold pinion gears are used. LED attachment parts are included, and the TLU-01 LED Light Unit with LEDs is included for export only. On rocks, dirt tracks and uneven trail sections, the front and rear rigid suspension layout gives the model the kind of axle movement that suits technical off-road driving. The finished G-Class body also brings strong display presence between runs, with its upright roofline, wide arches and rear spare wheel cover standing out clearly on a shelf or workbench. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3, RC assembly kit, TT-02

€159.99

The 1:10 Mercedes-AMG GT3 RC assembly kit pairs the dramatic shape of the GT3 race car with the TT-02 chassis, creating a build that stands out with a long hood, low roofline and prominent rear wing. Its transparent polycarbonate body captures the full-size car's competition form in a lightweight shell that takes paint and markings for a finished race-ready look. At 453 mm long with a 257 mm wheelbase, the model has the proportions of a modern GT racer, and separately molded side mirrors and rear wing parts sharpen that outline further. The body is designed for PS-63 Bright Gun Metal, with PS-55 Flat Clear applied on the outside to achieve the matte finish described in the kit data. Stickers and masking stickers are supplied for the car's markings and paint layout, supporting a cleaner, more defined result across windows, lights and body graphics. The TT-02 platform is built as an entry-level chassis with scope for tuning, and the available option parts line gives room to refine the setup over time. This kit suits workbench sessions focused on body finishing, decal placement and chassis assembly, then moves naturally into on-road running once the build is complete. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 2002 Mercedes-Benz CLK AMG, RC assembly kit

€154.99

This 1:10 RC assembly kit recreates the 2002 Mercedes-Benz CLK AMG with the long, low stance of the racing-based coupe and dimensions of 444 x 185 x 125 mm. The 257 mm wheelbase gives the shell the proportions used by the TT-02 platform, so the finished car carries the wide-fender silhouette and rear aero profile with a convincing on-road presence. The body is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, adding extra definition beyond the main shell. Stickers and masking stickers are supplied for the paint job, supporting window masking and exterior markings during finishing. The kit includes the TT-02 chassis, a Type 540 Torque-Tuned motor and an ESC, combining shaft-driven 4WD with a layout widely used for electric touring builds. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor hall floor or a clean stretch of asphalt, the slick-tire setup and 4WD layout suit controlled laps and steady corner entry. Between running sessions, the body finishing process, mirror fitment and wing installation give the model a detailed workshop character that continues after the chassis is built.

On-road RC cars (2WD/4WD)

1:10 BMW M3 GT2 2009, RC assembly kit, TT-01E

€174.99

The 1:10 BMW M3 GT2 2009 RC assembly kit brings the race-bred shape of the 2009 GT2 machine into a detailed build with running performance to match. Its polycarbonate body captures the low, wide touring car silhouette, while the included LED light set adds a striking visual effect when the finished model heads onto smooth indoor or outdoor surfaces. At the center of the build is the TT-01E platform, a shaft-driven 4WD chassis with a low-profile bathtub frame. The 452 mm length, 188 mm width, 132 mm height and 257 mm wheelbase give the model the proportions of a full touring car, while the chassis layout keeps key mass low in the frame. Double wishbone suspension supports the running setup, and updated markings with masking stickers help complete the 2009 BMW M3 GT2 look with crisp body detailing. An electronic speed controller and Type 540 Torque-Tuned motor are included. Radio gear, a battery pack, a charger and paints are required separately. This assembly kit suits hobby sessions that combine chassis building, body finishing and on-road RC driving in one focused project. Once completed, the model fits track-style laps, car-park runs and shelf display between driving sessions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 BMW M3 Sport EVO 1992, RC assembly kit

€169.99

The BMW M3 Sport EVO 1992 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic touring car silhouette with a shaft-driven 4WD layout built for controlled on-road running. The lightweight 1.0 mm polycarbonate bodyshell comes unpainted, giving the orange Jagermeister race look and the updated markings their place during the finishing stage. The TT-02 platform uses an enclosed drivetrain layout, and the standard 257 mm wheelbase sets the proportions for this touring car format. Silver mesh style wheels are paired with slick tyres, matching the circuit-focused character of the body shape and rear wing. Side mirrors and the rear wing are supplied as ABS add-on parts, adding extra definition to the shell once fitted. The kit also comes with stickers and masking stickers for the paint job, while optional tuning parts are available for builders who want to refine the setup over time. With overall dimensions of 448 mm length, 185 mm width and 135 mm height, the model has the low, wide presence associated with early 1990s DTM machinery. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor track, a car park circuit or a home workbench, the combination of scale bodywork, matched electronics and classic racing livery gives each stage of the build and each run a clear motorsport focus.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz 190 E EVO II, RC assembly kit

€174.99

The Mercedes-Benz 190 E 2.5-16 EVO II 1991 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic DTM silhouette with a shaft-driven 4WD layout built for controlled on-road running. At 445 mm long, 184 mm wide and 137 mm high, the model carries the compact proportions and extended aero surfaces of the race car into a size that reads clearly on the track. The bodyshell uses 1.0 mm polycarbonate to form the over fenders, front spoiler, rear spoiler and large rear wing, while separate black ABS parts reproduce the side mirrors, front grille and emblems as distinct components. A 257 mm wheelbase gives the chassis a widely used touring car format, and the TT-02 layout is known for its straightforward shaft drive arrangement and stable footprint. Silver dish wheels and racing slick tires suit smooth surfaces, and the included stickers plus masking stickers support an accurate paint finish with the 1991 race livery. This setup suits bench assembly, body finishing and regular circuit sessions in equal measure, with the visual character of the DTM machine carrying through once the shell is painted and mounted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mini Cooper Racing, RC assembly kit, MB-01

€164.99

The 1:10 Mini Cooper Racing RC assembly kit combines a compact MB-01 chassis with the unmistakable shape of the classic Mini Cooper Racing. At 315 mm long, 167 mm wide and 140 mm high, the model brings short-wheelbase proportions and retro touring style together in a format that stands out on the bench and on the track. The clear polycarbonate bodyshell captures the car's compact 2-door form in lightweight material ready for finishing, while updated markings sharpen the period racing character. Beneath the shell, the MB-01 platform uses a 2WD layout and a 210 mm short wheelbase. The center frame keeps the battery pack, motor and R/C equipment layout in place while final gears and steering linkage directions can be changed to switch between front- and rear-wheel drive. For rear-wheel drive cars, low or high motor position can also be selected. Unitized motor mount, final gear and suspension sections keep the build organized and make maintenance more straightforward after running sessions. 8-spoke wheels paired with 60D radial tires complete the road-going stance, and the symmetrical 4-wheel double wishbone suspension with friction dampers supports composed cornering on smooth surfaces. An electronic speed controller and 540 motor are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan R91CP 1992, RC assembly kit

€179.99

The 1:10 Nissan R91CP 1992 RC assembly kit brings the long, low stance of a Group C racer into a detailed build with a polycarbonate bodyshell, separate black body accessories and a cockpit set with styrene driver figure. At 480 mm long, 204 mm wide and 109 mm high with a 280 mm wheelbase, the finished model carries the stretched proportions that define this endurance machine. The body is supplied unpainted, with included decals and pre-drilled body post holes that streamline shell preparation while leaving the final finish open to the chosen livery. Separate side mirrors, spoiler mounts, air intake and windshield wipers add layered exterior detail, and the light cases are moulded into the shell with no provision for LEDs. Underneath, the proven Group C Vintage platform pairs front and rear space frames with FRP plates in an ABS bathtub layout. The rear section uses a rigid axle, while the front end keeps its own independent movement for a layout that reflects classic RC circuit design. On a smooth track or a large indoor running area, the high-grip sponge tires and 5-spoke gunmetal wheels suit fast, flowing laps and stable corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€169.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 RC assembly kit with the low, wide stance and track-focused shape of the full-size race car translated into a detailed polycarbonate bodyshell. At about 479 mm long, 188 mm wide and 127 mm high, the model carries strong visual presence on the bench and on the circuit, with a separate polycarbonate rear wing and separate light cases sharpening the finished outline. Under the body, the shaft-driven 4WD TT-02 chassis uses a short 251 mm wheelbase and a layout known for straightforward adaptability. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted shell. Black 10-spoke wheels and slick tires complete the GT race look with a setup suited to smooth surfaces. The kit also includes stickers and masking stickers for the paint job, plus a urethane bumper to help keep the body in good condition during use. The result suits measured assembly sessions as much as running time, with each stage adding visible race-car detail before the chassis takes to the floor. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TT-02 Type-SRX, RC chassis kit, 4WD

€339.99

The 1:10 TT-02 Type-SRX RC chassis kit brings a focused shaft-driven 4WD platform to on-road building, with race-oriented hardware chosen to make setup changes meaningful on the track. Full ball bearings, a 27T aluminum pinion gear and the included high speed gear set establish a 6.55:1 ratio that suits quick response and efficient power transfer through the driveline. This version draws on parts from the TT-02 Type-S series and adds a package of hop-up components selected for this chassis. Rear drive shafts use a 39 mm length specific to the Type-SRX and feature a hard coat for added lubricity at the contact surfaces. The TT-02 hi-torque servo saver with aluminum horn is fitted to protect the steering mechanism and servo when the front end takes load. Clamp type 5 mm aluminum wheel hubs, TRF damper oil seals, cross joints for low friction assembly universal shafts and short ball connector nuts for TRF dampers add further tuning-focused detail to the build. On a smooth circuit, the double wishbone suspension and direct driveline layout give a clear picture of how spring, damping and alignment changes affect corner entry and exit. A dedicated carrying case keeps the chassis together between bench work and running sessions. A body, radio gear, a battery pack, a charger, a motor, tires and paints are required separately.

Off-road RC cars

1:12 Lunch Box Re-Release, RC assembly kit

€164.99

The Lunch Box Re-Release brings back a classic Tamiya van with a 1:12 scale body, oversized 115 mm tyres and a lifted monster truck stance that turns every run into a rolling centrepiece. First released in 1987, this RC assembly kit combines the boxy shape of a custom panel van with the tall proportions and visual punch of big-wheel off-road styling. The white ABS body and yellow ABS wheels give the model a strong period look straight from the workbench, while the side panels offer broad surfaces for custom paint and graphics. Drive comes from an included 540 brushed motor, and reverse speed control with low voltage protection is equipped for brushed running. The chassis layout stays true to the original concept with a box type frame, 2WD drive, front swing axle and rear rolling rigid suspension. That combination creates the tall ride height and lively character that made the Lunch Box such a memorable name in RC history. On tarmac, packed dirt or open paved space, the van's high stance and large tyres create an unmistakable presence as it bounces, turns and charges ahead. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1991 Audi V8 Touring, RC model kit, TT-02

€154.99

The 1:10 1991 Audi V8 Touring brings a landmark DTM racing car into RC form with the TT-02 platform underneath and a clear polycarbonate bodyshell above. Its wide sedan proportions, rear wing, side mirrors and No.45 Frank Biela markings give the finished build the stance of the 1991 championship car whether it is lining up on asphalt or resting between runs. The assembly kit pairs a shaft-driven 4WD layout with a Type 540 Torque-Tuned motor and an electronic speed controller, creating a direct, planted driving character on on-road surfaces. Two-piece mesh wheels carry racing slick tyres, matching the touring car look while supporting smooth rolling grip on paved ground. The TT-02 layout uses identical left and right suspension arms and uprights, which simplifies parts identification during the build. A 257 mm wheelbase is specified for the bodyshell, and ABS side mirrors add another scale detail to the finished car. Radio gear, a battery pack, a charger and paints are required separately. On a workbench, the clear body invites careful trimming, painting and decal placement to recreate the 1991 race livery with crisp panel lines and sponsor graphics. Once assembled, the chassis suits car park sessions, club practice laps and shelf display alike, with the historic Audi shape giving the model a strong presence even when standing still.

On-road RC cars (2WD/4WD)

1:10 Audi quattro A2, RC assembly kit, TT-02

€154.99

The 1:10 Audi quattro A2 RC assembly kit pairs a classic rally silhouette with the TT-02 platform, creating a build that looks purposeful on the bench and tracks cleanly on paved surfaces. At 458 mm long and 187 mm wide, the finished car carries the wide-arched proportions, rear wing and period body lines of the quattro A2 in a clear polycarbonate bodyshell. Separate ABS parts add definition to the front and rear light cases, fog lamps, side mirrors and wing details, while silver 5-spoke wheels match the competition look. The main headlight buckets can be fitted with separately sold LEDs, adding another layer of scale realism to evening display or running sessions. Under the shell, 4-bevel differential gears and double wishbone suspension help the chassis deliver smooth cornering response. The TT-02 layout is known for its adaptable design, and the 257 mm wheelbase suits the body proportions closely. This kit suits builders who want the hands-on process of trimming, painting and finishing a rally car body before taking it onto smooth ground for RC driving. Radio gear, a battery pack, a charger and paints are required separately. Optional TT-02 tuning parts are also available for those who want to refine the setup further after the first runs.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC assembly kit, TT-02

€169.99

The Audi R8 LMS 2008 arrives here as a 1:10 R/C assembly kit that combines GT3 race car presence with the proven TT-02 platform. Its 1.0 mm polycarbonate body recreates the shape of the 2008 LMS with a low roofline, pronounced side sections and a large rear wing, giving the finished car a sharp circuit look whether it is lining up on the floor or resting on a shelf between runs. The TT-02 chassis uses a shaft-driven 4WD layout, and the kit also includes an ESC and a Type 540 Torque-Tuned motor for a complete core drive package. With overall dimensions of 434 mm x 194 mm x 120 mm and a 257 mm wheelbase, the chassis sits in classic touring car territory and gives the body its long, planted proportions. Black 16-spoke wheels and racing slick tires complete the competition style, while stickers and masking stickers support the paint process and help bring the race livery to life with cleaner window lines and graphic placement. This assembly kit suits bench sessions focused on body finishing, decal work and chassis building, then moves naturally into on-road driving once the separately required equipment is added. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 BMW M4 GT3 EVO, RC kit, TT-02 chassis

€184.99

The 1:10 BMW M4 GT3 EVO RC kit brings the updated GT3 racer onto the TT-02 chassis, combining a detailed polycarbonate bodyshell with a shaft-driven 4WD layout built for consistent on-road running. Enlarged front air intakes, smaller exterior mirrors, redesigned headlights and rear lights, and the revised rear wing give the shell the current EVO appearance in a form that stands out on the bench and in motion. Under the body, the TT-02 platform uses a smooth underside, adjustable wheelbase, ground clearance, track width and gear ratio, creating a chassis that can be set up for different driving styles. Double wishbone suspension with suspension struts works at the front and rear, and the enclosed drivetrain helps keep the running gear tidy during regular use. A 540 torque-tuned motor and electronic speed controller are included, while the battery compartment is shaped to accept common battery types. Separate polycarbonate light cases and black ABS parts for the mirrors and rear wing struts add further definition to the body. With a length of 443 mm, width of 188 mm, height of 132 mm and a 257 mm wheelbase, the model has touring car proportions that read clearly on the track. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

€154.99

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing lines that made the original 1955 car instantly recognizable. The lightweight polycarbonate body captures the early-period version with 2 rounded headlights, while the long-wheelbase MB-01 L layout gives the model a 239 mm wheelbase within overall dimensions of 419 x 198 x 137 mm for a planted on-road stance. The compact MB-01 chassis is built as a 2WD platform and uses a center frame that keeps the battery pack, motor and R/C equipment in place while drivetrain configuration changes are made. By changing the attachment directions of the final gears and steering linkage, the chassis can be set up for front-wheel drive or rear-wheel drive. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 4-wheel double wishbone suspension with friction dampers, and the motor mount, final gears and suspension are arranged in unitized sections for straightforward maintenance work. A 540 motor and electronic speed controller are included. On smooth on-road surfaces, the 60 mm front and rear tires suit the DS body shape and wheelbase with a composed, scale look. Radio gear, a battery pack and a charger are required separately, and the export body is supplied clear rather than pre-painted, leaving the finish open to a custom build.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Comical Hotshot, RC assembly kit, GF-01CB

€209.99

The 1:10 RC Comical Hotshot (GF-01CB) is an RC model assembly kit built around a compact off-road layout with a stylized Hotshot body, wing and a stance that turns every run into a lively visual scene. The lightweight polycarbonate shell is pre-painted in PS-2 Red, and the included sticker set based on the 2007 re-issue Hotshot adds the finishing graphics without requiring a separate body paint stage. Power runs through the GF-01CB chassis via a gear-driven 4-wheel drive system, while ABS two-part wheels use red and white spoke sections to match the body styling. ST block bubble tires pair a stepped tread with 45/99 mm front and 55/99 mm rear sizing, giving the chassis its distinctive proportions and helping it track across uneven ground. Red-molded CVA Super Mini oil dampers manage suspension movement during bumpy driving, and the rear wheelie bar supports dramatic nose-up acceleration when throttle is applied hard. Dedicated side guards, bumper and muffler parts complete the custom look, and included light pods allow installation of separately sold 5 mm LEDs. This model suits bench building sessions as well as short outdoor RC runs on loose, uneven surfaces where the tall tires and 4WD layout can be appreciated. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Ford Escort MkII Rally, RC model kit

€199.99

The 1:10 Ford Escort MkII Rally RC model kit pairs a classic rally shape with the MF-01X chassis, creating a machine that looks at home kicking up dust on flat dirt or tracking cleanly across asphalt. Its clear polycarbonate body recreates the Escort MkII form with a lightweight shell, while molded ABS parts for the bumpers, side mirrors and fog lights bring extra definition to the exterior. Under the shell, the MF-01X layout uses a rear-mounted 540 Torque Tuned motor, a propeller shaft and gear differentials to drive all 4 wheels. The chassis frame combines a 3-segment structure with a 2-piece frame and gearbox housing, giving the running gear a compact, purpose-built layout. At 414 mm in length with a 239 mm L wheelbase, the model carries the long-wheelbase rally setup specified for this body. The chassis can also be converted to other wheelbase formats with separately sold parts, and it remains compatible with previous M-chassis bodies. An electronic speed controller is included. The decal sheet finishes the shell with sponsor logos and period rally graphics, while the front and rear light cases are compatible with separately sold 5 mm LEDs for an illuminated display or night-stage look. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Escort body and rally markings deliver strong historic motorsport character; on the ground, the 4WD layout and suspension setup support running across mixed surfaces.

Off-road RC cars

1:10 Ford F-150 Ranger XLT, RC model kit

€374.99

This 1:10 RC model kit brings back the Ford F-150 Ranger XLT as a reissue of the 1981 release, capturing the angular lines and pickup stance of the seventh-generation F-series in a 430 x 215 x 185 mm format. The ABS body is shaped with triangular side windows on the cab, and the stealth front body mount removes visible mounting holes at the nose for a cleaner scale appearance. Freshly moulded exterior parts add detail across the shell, including side mirrors, windscreen wipers, headlights, a front grille section and bumper protection. An updated decal sheet supports the period finish, and the body also carries a driver figure for a fuller cockpit presentation. Ford emblems are reproduced at the front and rear, reinforcing the character of the full-size truck. The complete model weighs 1880 g, giving the chassis and body combination a planted feel in motion. Under the shell, a 540 electric motor and electronic speed controller form the drive package, with electronics and the 7.2 V battery area covered by a transparent housing. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the pickup reads as a detailed vintage reissue; on the ground, the long body, rear sand tyres and 2WD layout suit loose-surface running with a classic off-road stance.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mini Cooper Rally '94, RC assembly kit, M-05

€154.99

The 1:10 Mini Cooper Rally '94 RC assembly kit combines compact front-wheel-drive handling with the distinctive shape of the classic rally car. Built on the M-05 chassis, it pairs a semi-monocoque frame with a low center of gravity, creating a focused layout that suits road running and careful setup work alike. The chassis uses a short 210 mm wheelbase and measures 322 mm long, 160 mm wide and 140 mm high. Its gearbox, motor, battery, receiver, servo and speed controller sit close to the centre of the frame, a layout chosen to keep weight distribution even across the car. The narrow structure gives the model a tidy footprint, while shaft drive forms the basis of the 2WD transmission. An electronic speed controller is included, along with a Type 540 Torque-Tuned motor. The unpainted polycarbonate bodyshell leaves the exterior ready for a custom finish, and the platform is compatible with many Tamiya bodies. On the bench, the compact dimensions and clearly defined chassis layout support a build that stays close to the mechanical essentials. Once completed, the short-wheelbase M-05 format suits smooth tarmac runs, display between sessions, and detailed body finishing that brings the Rally '94 character into view. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 NISMO R34 GT-R Z-Tune, RC assembly kit

€234.99

The 1:10 NISMO R34 GT-R Z-Tune RC assembly kit brings the sharp lines of the rare 2-door coupe to the TT-02D drift chassis, combining detailed scale presence with a setup shaped for controlled sideways driving. The polycarbonate body recreates the widened fenders, vents and rear wing of the Z-Tune, giving the finished car a low, aggressive look on the track. At the center of the build is the TT-02D platform with a 257 mm wheelbase, shaft-driven 4WD layout and a protected drivetrain. A 540 SPORT TUNED motor and included electronic speed controller complete the drive package for responsive throttle input during drift sessions. The chassis specification also features 24 mm drift-spec tires, CVA oil dampers, full ball bearings and an aluminum motor heat sink. Window masking film is supplied for the body, supporting accurate paint separation on the glazing areas while the shell is finished. Numerous TT-02 option parts are available separately for further tuning. The kit, illustrated assembly instructions, electronic speed controller, 540 electric motor and polycarbonate body are included. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the model suits smooth indoor practice lines, marked parking-lot style layouts and display between runs, with the Z-Tune body shape giving every slide a distinctly motorsport-inspired silhouette.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Kadett GT/E Rally, RC assembly kit

€179.99

The 1:10 Opel Kadett GT/E Rally RC assembly kit combines classic rally bodywork with the adaptable MB-01 chassis, creating a build that balances scale character and chassis tuning. The painted bodyshell, number 16 markings and 4 auxiliary front spotlights give the coupe a clear period competition presence while the compact platform keeps the mechanical layout visible and accessible during assembly. The MB-01 platform allows 3 wheelbase choices of 210 mm, 225 mm and 239 mm by changing the joint section between the lower deck and sub deck. Steering linkage length changes with the selected wheelbase, with the manual showing 84 mm settings for MR S and MR M plus an 87 mm setting for MR L. The chassis also allows a change between FF and MR layouts by reversing the differential unit direction, and that conversion calls for corresponding rebound screw settings of 1.0 mm at the front and 2.5 mm at the rear. In MR form, a high motor position can also be selected, and the electronics positions change accordingly. This assembly kit suits builders who enjoy adjusting layout as well as body style, whether the focus is shelf display between runs or testing different chassis configurations on a low-grip surface. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€194.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 R/C model assembly kit built on the TT-02 platform, combining a recognisable GT racing silhouette with a chassis layout made for accessible setup and consistent on-road driving. At about 479 mm long, 188 mm wide and 127 mm high, the finished car has the low, stretched stance that suits circuit-style running and shelf presence alike. Its polycarbonate bodyshell is pre-painted in Black and Gun Metal, with Smoke windows, a black rear wing and black light cases already finished for a clean race-ready look. Separate black parts depict the side mirrors and wing stays, adding extra definition to the body shape without turning the build into a paint-heavy project. The set also includes Item 51226 Urethane Bumper L for the TT-01 and TGS, fitted to help protect the body during regular running. Stickers and masking stickers are supplied for added detail in the finishing stage. Under the shell, the shaft-driven 4WD layout works with the short 251 mm wheelbase to keep the car composed through bends and direction changes. Black 10-spoke wheels and slick tires suit paved surfaces and complete the GT race character. The included instructions support the assembly process, while radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, 2WD

€154.99

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the configurable BT-01 platform for hands-on on-road running. At 457 x 185 x 135 mm, the finished model carries the Supra profile with a wide stance, a defined nose and the visual presence of a full-size coupe scaled for the bench and track. The BT-01 center frame is designed so the battery pack, motor and RC equipment setup can stay in place while the final gears and steering linkage are repositioned to change the drivetrain layout. That structure allows front-wheel drive, front-motor rear-wheel drive and midship rear-motor rear-wheel drive choices, with 6 setups available in total. Unitized sections for the motor mount, final gears and suspension keep the chassis layout organized during the build and during later maintenance. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further setup tuning. The 4-wheel double wishbone suspension mirrors left to right and works with friction dampers for a clear, mechanical on-road setup. The 1.0 mm polycarbonate body gives the shell its light form over the chassis, making the Supra lines stand out during painted display and radio-controlled driving sessions alike. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra, RC assembly kit, TT-02D

€194.99

The 1:10 Toyota Supra on the TT-02D platform brings a well-known sports car shape into a drift-focused RC assembly kit with a 257 mm wheelbase and a detailed polycarbonate bodyshell. The body traces the aggressive lines of the original release from kit 58392, and carbon pattern decals for the engine hood and rear wing add a tuned street-racing look once the shell is finished. This version uses the TT-02D drift spec, a specially tuned form of the TT-02 chassis built around shaft-driven 4WD. Separately molded side mirrors and rear wing parts add extra scale definition, while an aluminum motor heat sink supports the included 540 SPORT TUNED motor during running. An electronic speed controller is included in the kit, so the core drive package is already matched to the chassis layout. The 24 mm Drifttech tires sit on metal-plated mesh wheels, giving the model the right contact patch and visual style for drift sessions. On a smooth indoor surface or a prepared hobby track, the combination of drift tires, oil dampers and the TT-02D layout supports long slides, quick direction changes and steady transitions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 XV-02 PRO, RC chassis kit, shaft-driven 4WD

€374.99

The 1:10 XV-02 PRO RC chassis kit brings shaft-driven 4WD and a front mid-ship motor into a layout built for rally running and detailed setup work. Equal-length front and rear long propeller shafts support a balanced drivetrain arrangement, while the center-left longitudinal battery pack position helps distribute weight for controlled handling on mixed surfaces. Tuning depth sits at the core of this chassis. The kit comes with 2 39T differential gears and 1 40T differential gear, allowing front and rear drive balance to be altered by changing the gear combination at each end. Newly designed gears, a bathtub frame chassis, a chassis cover and 6-degree caster blocks define the updated structure, while suspension arms and front uprights are based on the XV-01 chassis kit. An aluminum servo mount is included, and new metal parts are used for the motor mount, propeller shafts, input and center shafts, plus the urethane bumpers. Long aluminum dampers work at both front and rear, and rally dish white wheels are matched with rally block tires for the intended running style. The polycarbonate chassis cover with wheel well liners helps limit dirt and dust entering the chassis during use on gravel and similar terrain. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:12 Lunch Box Black Edition, RC kit, 2WD

€164.99

The 1:12 Lunch Box Black Edition brings custom van styling and RC wheelie action together in a compact kit with a 385 mm length, 290 mm width and 207 mm wheelbase. Its raised stance, oversized proportions and black-finished body create a bold silhouette that stands out on tarmac, packed dirt and short grass. This reissue traces back to the original 1987 Lunch Box and keeps the playful monster-van character that made the design memorable. The Black Edition uses a black-coloured ABS body with matching black rims, while chrome-plated parts on the radiator grille and bumper sharpen the contrast at the front end. A wheelie bar sits at the rear to support repeated lift under acceleration, and the lighting preparation leaves room for a more detailed build. The kit format also suits builders who enjoy fitting and finishing the shell before the first run. On open ground, the short wheelbase and tall tyre format give the model a lively attitude in tight turns and quick throttle inputs. Car park sessions, club meetups and casual weekend running all suit the Lunch Box Black Edition well. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Lunch Box EVO, RC model kit, CW-01E

€214.99

The 1:12 Lunch Box EVO brings the tall van shape and wheelie-ready character of a Tamiya classic to the updated CW-01E chassis. With a length of 390 mm, width of 295 mm and height of 220 mm, the model keeps its unmistakable proportions while the revised layout gives it a more settled feel on the move. A tub frame chassis forms the base of the kit, and the EVO revision adds detail that changes how the model behaves on the ground. The front strut brace increases chassis rigidity and also serves as a transponder mount. The body used here matches the version from item 58347, while the longer wheelbase and wider track compared with that earlier release sharpen traction and drivability. A new decal sheet supports the finishing stage with fresh markings for the ABS shell. Running sessions on tarmac, packed dirt or open paved areas make the most of the 2WD layout and the model's lively stance. Radio gear, a battery pack and a charger are required separately. The combination of classic Lunch Box styling, updated geometry and detailed kit construction gives the EVO version a strong presence both on the bench and in motion.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya 1:10 RC Toyota Celica GT-Four Bundle

Product bundle consisting of: 1:10 RC Toyota Celica GT-Four TT-02 / 7,2V/1800mAh NiMH Race Battery TAM   Article number: 500608221 Product: 7,2V/1800mAh NiMH Race Battery TAM 500608221 - 7.2V/1800mAh NiMH race battery TAM from Carson: This racing pack delivers reliable power especially for RC vehicles and other model building applications and is fast-charging and high-current discharge capable. Technical data: 7.2 V, 1800 mAh, max. charging current 1.8 A; connection: Tamiya plug system. Fits many RC models.  

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1978 Ford Zakspeed Capri Turbo, RC assembly kit

€174.99

The 1:10 1978 Ford Zakspeed Capri Turbo RC assembly kit brings one of the standout DRM racing cars of the late 1970s onto the TT-02 chassis, pairing a low, wide touring car stance with shaft-driven 4WD. At 488 mm long, 205 mm wide and 124 mm high, the model carries the dramatic proportions of the original car into a build that suits detailed bench work and fast on-road sessions alike. The bodyshell is formed in 1.0 mm polycarbonate and arrives unpainted, leaving the paint finish and final race look open to the builder. ABS add-on parts supply the side mirrors and rear wing, and the kit also comes with stickers plus masking stickers for the paint job. A Type 540 Torque-Tuned motor and an electronic speed controller are included, so the drive package is already matched to the TT-02 platform. The standard 251 mm wheelbase sets the chassis geometry, while the enclosed drivetrain keeps the central layout tidy during assembly and maintenance. On the road, the front 26 mm slick tyres and wider 30 mm rear slick tyres give the model the visual balance of the 1978 racer, and the independent suspension at both ends supports smooth response through bends. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 2003 Focus RS Custom, RC assembly kit, TT-02

€149.99

This 1:10 RC assembly kit recreates the 2003 Focus RS Custom as a compact on-road machine with rally-derived shape and street-focused detailing. At 427 mm long, 185 mm wide and 145 mm high, the body sits over a 257 mm wheelbase and gives the finished car a low, purposeful stance on the TT-02 platform. The bodyshell uses 1.0 mm polycarbonate, a material chosen for light weight and crisp shaping across the bumper contours, flared arches and roofline. Separate parts are used for the side mirrors and rear wing, which adds more definition than a one-piece shell alone. The custom street version is depicted without sponsor logos, keeping the finish clean and focused on the car's form. A Type 540 Torque-Tuned motor and ESC are included, so the drive package is already specified for the chassis layout. Radio gear, a battery pack, a charger and paints are required separately. On-road running suits the model's proportions and wheel setup, while the included stickers and masking stickers support the painting and marking stages before the shell is mounted in place. The combination of scale bodywork, shaft-driven transmission and detailed finishing steps makes this kit as engaging on the bench as it is during controlled runs on smooth surfaces.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA RC assembly kit

€174.99

This 1:10 RC assembly kit brings the Alfa Romeo Giulia Sprint GTA Club Racer into a compact on-road format with a prepainted polycarbonate bodyshell, classic racing proportions and a 385 x 167 x 132 mm overall size. The 225 mm middle wheelbase and MR layout named in the data place the focus on a nimble, planted chassis setup for detailed scale driving. At the center is the MB-01 chassis, a compact 2WD platform designed around configurable drivetrain choices. Final gears and steering linkage can be reattached to change between front- and rear-wheel drive without removing the battery pack, motor or RC equipment from the center frame. For rear-wheel drive cars, the motor position can be set low or high, adding another tuning option within the same chassis architecture. The kit also uses symmetrical 4-wheel double wishbone suspension with friction dampers, plus unitized motor mount, final gear and suspension sections that simplify access during setup and maintenance. An electronic speed controller and 540 motor are included. On the bench, the prepainted body and included stickers support a club-racer inspired finish with less body preparation before assembly. On the road, the 60 mm front and rear tires suit the compact touring-car stance, and the data specifies 60D tires for tire changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA, RC assembly kit

€164.99

This 1:10 R/C assembly kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer on the MB-01 chassis, pairing classic touring car lines with a compact 2WD platform. The lightweight polycarbonate bodyshell captures the shape of the 1965 coupe in a format sized at 385 mm long, 167 mm wide and 132 mm high, creating a focused build that carries period racing character onto the track. A 225 mm middle wheelbase defines this version of the MB-01, with the motor mounted in a midship rear position for rear-wheel drive. The chassis design allows 3 wheelbase choices, and the drivetrain layout can be changed between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage while the battery pack, motor and R/C equipment remain on the center frame. Rear-wheel drive setups can also use a low or high motor position. The kit runs on 60 mm front and rear tires and uses 60D tires when replacements are needed. Stickers are included to create a club racer design inspired by amateur-driven competition cars. The 4-wheel double wishbone suspension and friction dampers suit smooth circuit running, while the unitized motor mount, final gears and suspension sections keep the mechanical layout easy to follow during assembly and maintenance. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 au TOM'S GR Supra, RC assembly kit, TT-02

€164.99

The au TOM'S GR Supra arrives here as a 1:10 R/C model assembly kit with the TT-02 chassis and the low, wide proportions of a modern GT500 racer. At 466 mm long, 188 mm wide and 125 mm high, with a 257 mm wheelbase, the model carries the stretched stance and planted silhouette that make the full-size car so distinctive on the circuit. The clear polycarbonate body is paired with separate polycarbonate front light cases, while black ABS resin parts add the side mirrors and rear wing as individual exterior details. Canards are also included, and the body set comes with stickers plus masking stickers for the paint job, supporting the layered race livery shown by the shell. Tamiya also includes Item 51007, the Urethane Bumper M for TT-01 and TGS applications, to help protect the body during use. Front light cases are separate parts, and LEDs are not attachable. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the dimensions and 257 mm wheelbase help when planning body fit and stance on the chassis. Once finished, the GT500 bodywork, rear wing and slick-tire setup give the model a strong touring-car presence for display, tuning sessions and R/C running alike.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€169.99

The 1:10 Audi 90 quattro Racing RC assembly kit brings late-1980s touring race style to the TT-02 platform, with a 446 mm long polycarbonate bodyshell, a 192 mm width and a 127 mm height that give the car its broad, low competition look. Separate red ABS parts shape the mirrors, rear wing and air ducts, so the finished shell carries more depth than a one-piece body alone. A 251 mm wheelbase places the body on the short TT-02 layout, while the shaft-driven 4WD design keeps the drivetrain direct and neatly packaged through the chassis. The kit also includes a Type 540 Torque-Tuned motor and ESC, giving the running gear a matched starting point for paved-surface driving. Newly designed white dish wheels use a +4 mm offset, and the included urethane bumper helps protect the bodyshell during running and body mounting. Radio gear, a battery pack, a charger and paints are required separately. On a smooth car park, club track or other paved layout, the slick-tire setup and 4WD chassis suit clean, fast laps and precise line changes. During the build, the separate aero details, wheel design and racing proportions give the shell a focused finish that stands out on the stand as clearly as it does in motion.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€179.99

The Audi 90 quattro Racing arrives here as a 1:10 R/C assembly kit on the TT-02 platform, pairing classic 1989 touring car lines with a chassis layout built for controlled on-road running. At 446 mm long, 192 mm wide and 127 mm high, the finished model carries the broad fenders, deep front treatment and tall rear wing that defined the race machine's silhouette. The bodyshell is formed in polycarbonate and comes pre-painted in White PS-1 with Smoke PS-31 windows, so the main body finish is already in place before final detailing begins. Wheel arches are pre-cut and body mount holes are pre-made, which streamlines shell preparation while leaving the final finishing work to the builder. A 540 torque-tuned motor and electronic speed controller are included as part of the drive package. The 251 mm wheelbase gives the chassis the proportions used by many 1:10 on-road builds, and the included urethane bumper helps protect the bodyshell during close running. Radio gear, a battery pack and a charger are required separately. On a smooth indoor track or open asphalt space, the low touring car stance, slick tyre setup and 4WD drivetrain suit repeated laps, measured steering inputs and clean acceleration out of bends. The finished model also carries the visual character of the original Audi racer, making it equally satisfying between driving sessions on a shelf or workbench.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC model car, TT-02

€185.99

The 1:10 RC Audi R8 LMS 2008 pairs a modern GT racing silhouette with the TT-02 platform, creating a model car that carries both visual presence and a clear mechanical layout. The polycarbonate body captures the low nose, stretched cabin and broad fenders of the full-size racer, giving the finished car a track-bred look whether it is parked on a shelf or moving through a smooth corner. As an RC assembly kit, this version leaves the build itself as part of the appeal. The TT-02 chassis is known for its shaft-driven 4WD design and straightforward structure, which makes the placement of major components easy to follow during construction and later maintenance. The separate body format also opens space for a custom painted finish that can lean toward period race styling or a cleaner single-colour scheme. Radio gear, a battery pack, a charger and paints are required separately. On the floor or on tarmac, the low GT shape and 1:10 format create a convincing racing impression with each pass. The combination of scale detail, chassis engineering and hands-on assembly suits hobby sessions that continue beyond the first build into setup changes, body finishing and repeat driving runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi V8 1992 Touring, RC assembly kit, TT-02

€159.99

The 1:10 Audi V8 1992 Touring RC assembly kit brings classic touring-car presence to the TT-02 platform, pairing a 463 mm long body with a 257 mm wheelbase for a planted on-road layout. Its clear polycarbonate bodyshell recreates the imposing lines of the 1992 race car, and separate side mirror parts add another layer of scale detail once fitted. The body measures 188 mm in width and 138 mm in height, giving the finished model the broad, low proportions associated with this era of circuit racing. Included stickers reproduce the 1992 Audi V8 Touring markings, while masking stickers help guide the paint work on the clear shell. The TT-02 chassis uses a shaft-driven 4WD configuration, and its symmetrical layout keeps major components arranged for balanced weight distribution. Coil-spring damped double wishbone suspension at the front and rear works with 4-bevel differential gears to support smooth cornering and composed running on tarmac. On a home workbench, the kit offers a focused build centred on chassis assembly, body finishing and wheel fitment. Once completed, the silver mesh-style wheels, slick tyres and detailed sedan silhouette give the model a strong track-day look during on-road driving. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Blitzer Beetle, RC buggy, 2WD assembly kit

€209.99

The 1:10 Blitzer Beetle brings classic Beetle styling into an RC buggy format with a 2WD layout and a body shell shaped around the familiar rounded roofline, front fenders and compact rear. Bright orange body sections, a black rear and roof area, and large flame graphics give the model a bold custom-race look that stands out clearly once the buggy is on the move over dirt or gravel. Visible front suspension springs, a front bumper, side mirrors and window detailing add extra scale character beyond the main shell shape. The oversized knobby tyres suit the off-road buggy format, giving the model the visual stance associated with rough-surface running and vintage sand-race inspired machines. As an assembly kit, this version leaves the build as part of the hobby, with the chassis and body coming together before the first outing. Batteries are not included. The finished buggy suits track sessions, packed-dirt running areas and display between drives, where the Beetle silhouette and vivid livery remain a strong part of its appeal. It also fits hobby collections that focus on classic body styles, 1:10 RC machines or Tamiya buggy designs with a distinct retro character.

On-road RC cars (2WD/4WD)

1:10 BMW 318i STW, RC car kit, TT-01E

€164.99

The 1:10 RC BMW 318i STW brings a touring car silhouette into a build centered on the TT-01E platform, combining scale presence with radio control handling. As a kit, it suits builders who want the body, chassis and running gear to come together as a complete RC car rather than a display-only model. The BMW 318i STW designation gives the shell a clear motorsport identity, while the TT-01E layout anchors the mechanical side of the project in a widely recognized Tamiya chassis format. This pairing makes the model appealing both as a build subject and as a running car with a defined on-road character. The data identifies battery power and radio control operation, so the finished car is built for active driving rather than static shelf placement. Batteries are not included. On the bench, the kit format supports a measured assembly process that leads into body finishing and final setup. Once completed, the 1:10 scale format and RC control create a focused driving session on smooth surfaces, where the touring car shape and chassis-based construction come through in motion as clearly as they do during the build.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen 2CV Charleston, RC assembly kit

€144.99

This 1:10 RC assembly kit captures the Citroen 2CV Charleston in the distinctive 1982 model year form, pairing its rounded bodywork with the compact M-05 front-wheel-drive chassis. The lightweight polycarbonate shell gives the classic silhouette a clean, crisp presence on the track, while separate molded parts recreate details such as the front bumper support, headlights and side mirrors. The M-05 chassis uses a monocoque structure and a 239 mm wheelbase, with the motor, battery pack, receiver, servo and ESC arranged for balanced weight distribution and a low center of gravity. A 3-piece steering linkage works with 4-wheel independent double wishbone suspension to support stable cornering, and tread-patterned radial tires with inserts sit on 11-spoke wheels in gun metal color. The included ESC is compatible with brushed and sensor-based brushless motors, and the set also comes with a 540-type motor for the drive system. Hop-Up Option parts are available for the M-05 platform for further chassis tuning. On a smooth indoor surface or a paved outdoor run, the compact front-wheel-drive layout gives the model a direct, lively character that suits repeated laps and careful line placement through tighter sections. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

€174.99

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing proportions that made the original car stand out, pairing a pre-painted blue polycarbonate body with smoke-tinted windows and the early-style front end with 2 rounded headlights. At 419 mm long, 198 mm wide and 137 mm high, the model carries the DS shape with a clear road-car presence on the chassis. Under the body, the MB-01 platform uses a compact 2WD design built around a center frame. The layout allows 3 wheelbase options, and the drive system can be changed between front-wheel drive and rear-wheel drive by altering the attachment directions of the final gears and steering linkage. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 60 mm front and rear tires, with 60D tires specified for tire changes. An electronic speed controller and 540 motor are included. The 4-wheel double wishbone suspension uses friction dampers and a symmetrical structure, giving the running gear a tidy, technical layout during assembly and maintenance. Unitized sections for the motor mount, final gears and suspension help keep service work organized. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 DB01SR Chassis, RC assembly kit, 4WD

€329.99

The DB01SR Chassis kit brings a 1:10 belt-driven 4WD buggy layout together with the Baldre polycarbonate body, creating a focused RC build with race-oriented hardware already in the box. The 2 identical drive belts give the drivetrain a symmetrical basis that suits loose surfaces and fast direction changes on off-road tracks. This chassis kit is supplied with multiple Hop-Up Option parts, including front and rear assembly universal shafts, front and rear aluminum hex hubs, front and rear dish wheels, a TRF201 rear wing set and 2 sets of reinforced drive belts. The gear differentials use steel bevel gears, a combination intended for lower maintenance needs and compatibility with high-power motors. Square-shaped battery packs can be installed, which broadens battery fit within the chassis format. Radio gear, a battery pack, a charger and paints are required separately. On a dirt course, the slipper clutch helps the buggy settle its drive as grip changes through corners and rough sections. The carrying case keeps the chassis kit and included parts together between build sessions, transport and track days.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 F104 PRO II w/Body, RC assembly kit

€254.99

The 1:10 F104 PRO II w/Body is an RC assembly kit built around the lightweight F104 direct drive chassis, paired here with upgraded components and a new lower deck for a sharp, responsive formula racing setup. At 440 mm long, 180 mm wide and 88 mm high with a 270 mm wheelbase, the layout captures the long, low stance of a modern single-seater while keeping the mechanical package focused and compact. Its FRP double deck chassis uses an inline longitudinal battery position, helping keep the central layout clean and purposeful. At the rear, an aluminum ball differential lets the rear wheels be changed without dismantling the differential, a practical detail for tuning and maintenance between runs. Semi-pneumatic synthetic rubber tires support the on-road formula format with a realistic look and planted contact patch. The body set adds 2 side pontoon configurations, including alternative lower sections for chassis fitted with larger RC equipment. Separate parts depict the complex front wing, low rear wing, rear diffuser, mirrors and helmet, giving the finished car a layered competition look once painted and marked. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the kit offers detailed assembly and setup work; on smooth tarmac, the direct drive layout and formula proportions create a focused RC driving session with quick reactions and clean racing lines.

On-road RC cars (2WD/4WD)

1:10 Fiat 131 Abarth Olio Fiat, RC assembly kit

€184.99

This 1:10 RC assembly kit captures the Fiat 131 Abarth Rally Olio Fiat in a compact rally format built around the MF-01X chassis. The polycarbonate body measures 400 mm long, 180 mm wide and 132 mm high, and the 239 mm L-size wheelbase gives the shell the proportions of the original competition car as it sits over the chassis. The body uses separately molded components for the side mirrors and rear wing, which helps preserve the distinct shape of these details instead of flattening them into the shell. Polycarbonate light cases are designed for separately sold 5 mm LEDs, opening the door to a more complete front and rear light setup. The kit also includes stickers for body details and logos, allowing the Olio Fiat livery to be built up across the shell with the correct visual character. A Type 540 Torque-Tuned motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On the ground, the MF-01X layout combines shaft-driven 4WD with 4-wheel double wishbone suspension, a combination suited to paved running and flat dirt stages. The 239 mm wheelbase and higher rally-style stance give the chassis the look and clearance associated with classic rally machines. It suits bench sessions focused on body finishing just as well as outdoor runs where the suspension can work over loose, dusty surfaces.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford Escort Custom, RC assembly kit, TT-02

€154.99

The 1:10 Ford Escort Custom brings classic 1998 touring car style to the TT-02 platform in an RC assembly kit with a 425 mm length, 189 mm width, 145 mm height and 257 mm wheelbase. Its low roofline, wide body shape and race-inspired proportions give the finished model a strong track presence whether it is being built on the bench or lined up for a run. The bodyshell is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, so the exterior gains extra depth beyond a one-piece shell. White ABS dish wheels pair with treaded tires for the period-correct look shown by the Escort Custom body. Stickers and masking stickers are included for the paint job, supporting cleaner window lines and sharper placement of the livery details. The kit is based on the TT-02 chassis, a shaft-driven 4WD design with a bathtub frame layout that keeps the main components arranged in a straightforward format. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Ford Escort Custom body, wing and mirror parts create a focused motorsport silhouette with clear 1:10 scale character. During running sessions, the 4WD TT-02 layout and independent suspension support controlled handling while the detailed shell keeps the model visually tied to the full-size car.

On-road RC cars (2WD/4WD)

1:10 Ford Focus RS Custom, RC assembly kit, TT-02

€154.99

This 1:10 RC assembly kit recreates the Ford Focus RS Custom on the TT-02 platform, pairing a compact 427 mm length with shaft-driven 4WD for a layout built around controlled on-road running. The pre-painted 1.0 mm polycarbonate bodyshell gives the model its white custom finish straight away, while the 185 mm width and 145 mm height keep the proportions close to the full-size car's assertive stance. Separate parts depict the side mirrors and rear wing, adding sharper body definition than a single-piece shell alone. The 257 mm wheelbase works with the TT-02 layout to place the main components in a balanced arrangement across the chassis. Stickers and masking stickers are included for the finishing work, and the body arrives with pre-cut wheel arches and pre-made body mount holes. Smoke-tinted windows add contrast to the white shell, and the custom street version is presented without sponsor logos for a cleaner look. On a workbench, the kit offers a focused build centered on fitting the bodyshell, chassis parts and running hardware into a complete 4WD touring car. Once assembled, the combination of racing radial tires, 16-spoke wheels and the Focus body shape gives the model a crisp on-road presence suited to driving sessions and shelf display alike. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford GT Mk.II 2020, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Ford GT Mk.II 2020 as a low, track-focused machine with a 479 mm length, 188 mm width and 112 mm height. The 257 mm wheelbase gives the model the stretched proportions of the full-size car, while the lightweight polycarbonate shell brings the body lines into a form suited to painting, trimming and final detailing. Separate parts are used for the flying buttresses, rear wing and side mirrors, so the finished car carries more depth than a one-piece shell alone. Twin 5-spoke wheels match the race-bred look, and the included markings add the visual finish shown by the GT Mk.II design. The TT-02 platform is built around a shaft-driven 4WD layout, and its 4-wheel independent double wishbone suspension uses matching arm and upright parts side to side. That shared parts layout keeps maintenance more straightforward when the chassis is opened for adjustment or replacement work. On the bench, the body invites a careful paint process with masking for windows and light areas before the graphics go on. Once assembled, the long wheelbase, low roofline and prominent aero parts give the model a planted circuit stance that stands out in running sessions as clearly as it does at rest. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Ford Mustang GT4, RC assembly kit, TT-02

€154.99

The 1:10 Ford Mustang GT4 RC assembly kit brings GT4 race car presence to the TT-02 platform with a sharply formed polycarbonate body, a 459 mm overall length and styling based on the full-size car's CAD data. Front and rear light cases are also molded in polycarbonate, giving the shell extra depth around the lamps once the body is finished and mounted. The TT-02 chassis places this model in Tamiya's shaft-driven 4WD touring car range, with a layout designed to keep upkeep straightforward while leaving room to explore the broad TT-02 option parts line. Stickers are included to create the original livery, and masking stickers support the paint process on windows and detail areas. The shell also uses separately molded parts for the rear wing and side mirrors, which helps preserve the distinct GT4 silhouette. A 257 mm wheelbase is specified for the body, and the shell is prepared with pre-cut wheel arches to reduce trimming during assembly. On a smooth indoor surface or a paved outdoor run, the low racing body, slick tires and touring car chassis combine into a focused on-road driving setup with a clear motorsport look. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Honda NSX 1998 Racing, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing onto the TT-02 platform in a form that combines scale presence with focused on-road running. At 435 mm long, 194 mm wide and 121 mm high, with a 257 mm wheelbase, the finished car carries the low, stretched proportions of the race machine across tarmac and smooth indoor surfaces. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp shaping around the NSX lines. Gun metal 6-spoke wheels are paired with racing slick tires, giving the model the visual character of a circuit car and the contact patch suited to paved running. The TT-02 chassis uses a shaft-driven 4WD layout, a format that distributes drive front and rear through a central shaft for stable acceleration and composed handling. A Type 540 Torque-Tuned motor and ESC are included as part of the running package. Stickers and masking stickers support the paint process with defined window lines and race graphics. On a smooth car park, club floor or home workshop bench, the model suits builders who want both body finishing and driving in one project. Radio gear, a battery pack, a charger and paints are required separately, allowing the final setup and colour scheme to be chosen to match the intended running style.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Honda NSX Racing, RC assembly kit, TT-02

€174.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing into a compact on-road format with a 435 mm long body, a 257 mm wheelbase and the low, wide proportions that define the full-size race car. The pre-painted polycarbonate bodyshell arrives in PS-1 White with PS-31 Smoke windows, so the main color layout is already in place before the final exterior details are added. The bodyshell uses 1.0 mm polycarbonate and is shaped to capture the lines of the 1998 Honda NSX Racing, from the low nose to the extended rear wing profile. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for its straightforward drivetrain path and composed handling on paved surfaces. An ESC and Type 540 Torque-Tuned motor are included, giving the chassis its electric drive package straight from the kit. Gun metal 6-spoke wheels and racing slick tires match the car's circuit-focused character, while stickers and masking stickers help complete the livery and window detailing. On a smooth floor or paved running area, the long wheelbase and 4WD layout support clean tracking through bends and steady power delivery out of corners. The pre-painted body also suits builders who want to focus more time on assembly, decal placement and final setup than on the first paint stage. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Impreza Monte-Carlo 99, RC kit, TT-02

€164.99

The 1:10 Impreza Monte-Carlo 99 RC kit brings late-1990s rally character to the TT-02 platform, combining a detailed polycarbonate bodyshell with shaft-driven 4WD for controlled on-road running. The body captures the classic competition shape and uses separate side mirror and rear wing parts, so the finished car carries more definition than a one-piece shell alone. This assembly kit includes an electronic speed controller, a 540 electric motor, a polycarbonate body and detailed illustrated assembly instructions. Window masking stickers support a cleaner paint finish around the glazing, while the included sticker sheet recreates the Monte Carlo markings shown on the car. The TT-02 layout is designed as an accessible 4WD chassis, and its broad range of option parts opens the door to later setup changes as driving preferences develop. Gold 16-spoke wheels and rally block tires complete the period rally look with a tread pattern that matches the car's competition style. On a smooth car park, indoor hall or similar running area, the balanced TT-02 layout gives the model a steady, readable feel through direction changes. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Lancia 037 Rally, RC assembly kit, TA02-S

€234.99

The 1:10 Lancia 037 Rally RC assembly kit brings a classic Group B silhouette to the TA02-S platform, pairing the short-wheelbase chassis with a body shape known from the 1983 works rally car. At 422 mm long, 186 mm wide and 132 mm high, the model carries the compact stance, wide arches and rear wing that define the 037 on the stage. The body is injection molded and fitted with newly produced front bumper and sticker sheet parts created for this release. Metal-plated light cases frame the headlights, taillights and fog lamps, while separate side mirrors and windshield wipers add extra surface detail beyond the main shell. Inside, the cockpit insert depicts both driver and co-driver alongside the dashboard, giving the cabin a more complete rally layout when viewed through the glazing. The TA02-S chassis uses a bathtub frame and is compatible with standard Type 540 motors. An electronic forward and reverse speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On a paved course, the shaft-driven 4WD system and short wheelbase combine into a lively rally-style driving character, while the double-wishbone suspension and oil dampers help the chassis work through repeated corner entries. The detailed shell, competition markings and cockpit scene also give the finished car strong presence between running sessions.

On-road RC cars (2WD/4WD)

1:10 Lancia Delta HF Integrale, RC assembly kit

€169.99

The 1:10 Lancia Delta HF Integrale RC assembly kit pairs classic rally car shape with the TT-02 chassis, a shaft-driven 4WD platform built around a tub frame layout. At 407 mm long, 186 mm wide and 159 mm high, the model carries the compact, upright proportions of the original car while the 257 mm wheelbase sets the stance on the chassis. The unpainted polycarbonate body arrives with separate mirrors and a rear spoiler, ready for finishing work that brings out the car's period rally character. Under the shell, the TT-02 layout combines a central driveshaft with front and rear cone differentials using 4 bevel gears. The front end is toe adjustable, and the motor mount also accepts type 380 motors in addition to the included type 540 motor with air cooling. A battery compartment designed for different battery types broadens setup choice, while the included electronic speed controller completes the core drive package. Rally block tread tyres and white wheels match the car's competition look and suit loose-surface style running. The kit format gives the build real substance, from body preparation to chassis assembly and final setup. Decals and window masking film are included for the finishing stage, supporting accurate placement of markings and clean window lines. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Land Rover Defender 90, RC assembly kit, CC-02

€294.99

The 1:10 Land Rover Defender 90 on the CC-02 chassis brings classic 1990 off-road styling into an RC assembly kit with clear scale character and cross-country hardware. At 429 mm long, 200 mm wide and 215 mm high, the 3-door body sits with the upright stance and short-wheelbase proportions that define this vehicle. Its 242 mm wheelbase matches the short CC-01S size, giving this version the compact layout associated with the Defender 90. Separately molded parts for the grille, side mirrors, light cases and outer roll gages add sharper definition to the exterior, while the polycarbonate body keeps weight down. The drivetrain sends power through short propeller shafts to front and rear differential gears, a layout that suits loose ground and uneven terrain. LED compatibility is built in as well, with space for 2 x 5 mm headlights and 6 x 5 mm rear LEDs. A wide range of Hop-Up Option Parts is available for the CC-02 chassis. This assembly kit suits bench building, body finishing and outdoor RC running as separate parts of the hobby. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 M-07 Concept Chassis Kit, RC assembly kit

€194.99

The 1:10 M-07 Concept Chassis Kit is a front-wheel-drive RC assembly kit built around a rigid 1-piece monocoque with lower deck and integrated upper frame sections. At 332 mm long and 164 mm wide, the layout keeps the running gear compact and direct, creating a chassis that responds quickly while leaving core service points easy to reach between sessions. The M-07 uses 4-wheel double wishbone suspension with newly designed long arms and dedicated long steering linkage components. That geometry gives a wide setup window and supports measured changes in handling when rear toe is adjusted with spacers. The differential can be removed from the underside with minimal disassembly, which helps when tuning or servicing the drivetrain. Full ball bearings reduce friction through the transmission, and the chassis is also compatible with low-profile servos and standard IFMAR square-shaped Li-Po battery packs. Stabilizers can be fitted separately, and reinforced body mounts provide a more secure shell attachment. On a home workbench, the selectable 225 mm or 239 mm wheelbase opens the chassis to different M-chassis body combinations. At the track, the direct front-wheel-drive layout, oil-damped suspension and accessible setup points support repeatable changes that can be felt clearly from one run to the next.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 M-07R Chassis Kit, RC assembly kit

€269.99

The 1:10 M-07R Chassis Kit is an RC assembly kit built around a compact front-wheel drive platform, putting the mechanical layout in full view and making the chassis itself the main focus of the build. Road tyres, multi-spoke wheels, blue dampers and a foam front bumper give the platform a clear on-road setup, with the steering and suspension hardware visible across the full frame. The open layout shows how the major systems sit within the chassis, including the shock towers, steering linkage, exposed wiring and battery connection. That structure supports a build process where the placement of each section can be followed directly from the assembled frame, and it leaves clear access for later tuning or maintenance work. The low-profile electronics area keeps the center section visually tidy while preserving space around the running gear. The image also shows the chassis without a bodyshell, which makes the geometry of the platform easier to inspect and helps place attention on the mechanical specification rather than body styling. On a workbench, the kit suits builders who want the assembly to focus on suspension, steering and drivetrain layout. Once completed with separately required radio gear, a battery pack and a charger, the front-wheel drive configuration and road-going wheel setup point the chassis toward paved running sessions and setup changes between runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 M-08R Chassis Kit, RC assembly kit

€319.99

The 1:10 M-08R Chassis Kit is an RC assembly kit built around the rear-wheel drive M-08 Concept platform and equipped with a broad package of competition-minded option parts. Carbon fiber battery holders, a carbon fiber body mount base and a dedicated 20 g chassis weight shape a layout aimed at controlled balance on paved circuits, while the blue anodized finish on key parts gives the chassis a crisp technical look during bench setup and track preparation. At the rear, the TA06 ball differential uses 12 3/32-inch balls to manage power delivery with a stable, planted feel. Reinforced K parts support the gearbox and steering area, and M-07 Concept reinforced D parts use carbon fiber-reinforced resin in the suspension arms. Aluminum turnbuckle shafts in 3 x 18 mm, 3 x 23 mm and 3 x 32 mm sizes allow length adjustment without removing the adjusters, which speeds up tuning work between runs. Hex head screws are used throughout the build, and the kit also contains option parts such as aluminum wheel nuts, wheel hubs, suspension shafts, ball connectors, a servo saver, universal shaft cross joints and an aluminum shaft set. Radio gear, a battery pack, a charger and paints are required separately. On a club track or a car park circuit, the chassis supports measured setup changes for steering feel, suspension movement and rear traction. The exposed layout also suits workbench tuning, where damper settings, turnbuckle length and drivetrain setup can be adjusted before the next session.

On-road RC cars (2WD/4WD)

1:10 MB 190E debis Zakspeed, RC assembly kit

€159.99

The 1:10 MB 190E debis Zakspeed RC assembly kit brings classic DTM character to the TT-01 Type E platform, pairing a detailed touring car body with shaft-driven 4WD for controlled on-road running. The 445 mm length, 184 mm width and 257 mm wheelbase give the chassis the proportions of a full touring racer, with a long, low silhouette that stands out on the track and on the shelf. The transparent polycarbonate body is supplied with attachments and reproduces the race car shape with a separate rear spoiler, mirrors, chrome-plated radiator grille and Mercedes-Benz star. The body shell is finished with markings that build the debis Zakspeed race look shown by the 1990s DTM car. A Torque Tuned motor is included together with an electronic controller, creating a complete drive package around the TT-01 Type E layout. The 6-spoke rims and 26 mm slick tires match the on-road setup, while the suspension geometry works with independent front and rear movement for a settled response through corners. As a kit model, this car suits builders who enjoy preparing, painting and fitting a body shell before the first run. On a smooth circuit or open paved space, the low touring profile, shaft drive and slick tire setup support fast laps, clean direction changes and a strong scale racing presence. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 McLaren Senna, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit brings the McLaren Senna into an on-road format with a low polycarbonate body, black ABS side mirrors and a separate rear wing that sharpen the supercar silhouette. At 466 mm long, 194.6 mm wide and 118 mm high, the model has a broad, flat stance, while the 257 mm wheelbase gives the proportions a stretched, purposeful look. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for straightforward construction and broad setup flexibility across different running preferences. A Urethane Bumper L sits at the front to take the edge off minor contact during use and handling. The body shell requires painting, cutting out, attachment of parts and sticker application, so the finished car carries the builder's own finish rather than a pre-decorated shell. Radio gear, a battery pack, a charger and paints are required separately. On smooth ground, the racing radial tires and 10-spoke wheels suit the car's road-going character and visually match the sharp lines of the McLaren body. The kit fits hobby sessions that combine body finishing, chassis assembly and later driving time, with the completed model equally at home in running sessions or parked where the body shape can be appreciated up close.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3 EVO, RC assembly kit, TT-02

€179.99

The Mercedes-AMG GT3 EVO arrives here as a 1:10 RC assembly kit on the TT-02 chassis, combining modern GT3 bodywork with a shaft-driven 4WD layout built for controlled on-road running. At 454 mm long, 189 mm wide and 120 mm high, the model carries the low, stretched proportions of the race car, while the 251 mm short wheelbase shapes a compact touring car footprint on the bench and on the circuit. The body is formed in lightweight polycarbonate and uses separate polycarbonate front light cases, plus individual rear wing and canard parts to define the front and rear aero surfaces with more depth. Separate black ABS parts depict the side mirrors and rear wing stays, adding contrast and sharper edge definition to the shell. The kit also includes Item 53415 Touring Car Urethane Bumper Sponge. LED lights are not attachable on the front light cases. A Type 540 Torque-Tuned Motor is specified in the kit data, and the included ESC completes the main electronics package supplied in the box. This combination suits measured assembly sessions, painted body finishing and repeated runs on smooth tarmac or indoor on-road surfaces. Radio gear, a battery pack, a charger and paints are required separately, so the build can be completed with the preferred running equipment and body finish.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz CLK-GTR, RC assembly kit

€274.99

This 1:10 RC assembly kit pairs the 1997 Mercedes-Benz CLK-GTR with the TC-01 chassis, combining low GT racing proportions with a shaft-driven 4WD layout built for active on-road running. The polycarbonate body recreates the streamlined coupe form in a 470 mm length and 194 mm width, giving the finished car a long, planted stance that stands out on a circuit or display shelf. A 257 mm wheelbase sets the proportions, while silver mesh wheels and racing slick tires underline the competition look. The rear wheels use a wide tread, adding visual weight at the back of the car. Under the shell, the composite monocoque frame places the motor centrally and sends drive through front and rear propeller shafts with oil filled gear differentials. The suspension mirrors full-race thinking with A-shaped long arms and inboard front and rear setups, where push rods and rocker arms actuate the oil dampers. A rear transverse battery position also accepts 139 x 47 x 25 mm square-shaped battery packs. Adjustment options make the chassis rewarding to tune for repeated track sessions, with spacers and shims used to alter camber, skid and toe angle settings. Identical left, right, front and rear suspension arms and uprights help keep maintenance more straightforward when setup changes are part of the routine. A 540 motor and assembly guide are included. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mitsubishi Lancer Evo V, RC assembly kit

€154.99

The 1:10 Mitsubishi Lancer Evo V RC assembly kit brings late-1990s rally-bred styling to the TT-02 platform in a road car specification. At 445 mm long, 185 mm wide and 145 mm high, with a 257 mm wheelbase, the model has the proportions to give the Lancer Evolution V shape real presence on the track and on the bench. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp molded form around the bulging fenders, hood louvers, air intakes and rear section. Separate parts are used for the side mirrors and rear wing, adding depth beyond a one-piece shell. The kit also comes with stickers and masking stickers for the paint job, supporting accurate window masking and exterior markings during finishing. Beneath the shell, the shaft-driven 4WD TT-02 chassis provides the mechanical base, pairing straightforward drivetrain layout with the stable feel expected from an on-road touring platform. 12-spoke silver wheels and tread patterned racing radial tires complete the stance with a road-focused look that suits paved running. On a workbench, the body, markings and separate exterior parts support a detailed finishing session; on an indoor hall floor or smooth asphalt, the TT-02 layout and 4WD system give the model a composed, planted character through laps and direction changes.

On-road RC cars (2WD/4WD)

1:10 Monster Beetle, RC assembly kit, 2WD

€234.99

The 1:10 Monster Beetle RC assembly kit brings the shape of the early Volkswagen Beetle onto a raised 2WD off-road chassis, pairing classic custom styling with the tall stance and oversized tires that made the 1986 original stand out. At 410 x 290 x 240 mm, the model has a broad, planted presence that reads clearly on the bench and on rough ground. The body is formed in ABS, while the chassis keeps the ABS space frame layout of the earlier release. Rear universal drive shafts transfer power smoothly, and rubber boots help shield the joints from dust during off-road use. A large dust cover protects the installed R/C equipment, and the set also contains a driver figure that completes the cockpit view. The suspension layout combines double-wishbone front arms with a trailing arm rear setup, giving each axle a distinct mechanical character within the build. This reissue suits hobby sessions that mix careful assembly with outdoor running on dirt, gravel and other uneven surfaces. Radio gear, a battery pack and a charger are required separately. Once built, the combination of Beetle bodywork, tall ride height and deep-tread tires gives each pass the unmistakable Monster Beetle silhouette.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Motul Autech Z 2023, RC assembly kit, TT-02

€159.99

The 1:10 Motul Autech Z 2023 RC assembly kit brings Super GT presence to the TT-02 platform with a low, wide touring car shape and a detailed polycarbonate shell. At 468 mm long, 188 mm wide and 120 mm high, the finished car has the stretched proportions of the full-size racer, and the 257 mm wheelbase gives the chassis a balanced footprint for on-road driving. Separate polycarbonate front and rear light cases add depth to the bodywork, while canards, black ABS side mirrors and the large rear wing sharpen the race-bred silhouette. The shell is paired with stickers and masking stickers for the paint job, allowing the livery lines and sponsor graphics to be finished with clean separation. The TT-02 layout uses shaft drive for 4WD transmission and is built around a straightforward chassis design that keeps the mechanical arrangement easy to follow during assembly. Front and rear suspension hardware, the central battery position and the enclosed drivetrain layout give the model a tidy, competition-style structure. On a smooth car park or club track, the slick tires and 6-spoke wheels suit fast laps, sweeping corners and repeated setup sessions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Motul Autech Z 2023, RC car kit, TT-02

€184.99

The 1:10 Motul Autech Z 2023 brings current GT race styling to the TT-02 platform with a sharply contoured Nissan Z bodyshell, broad fenders and a tall rear wing that stand out on the track and on the shelf. Its low touring-car stance and enclosed wheel arches give the finished model the compact, aggressive look seen in full-size circuit machines. The body is formed in polycarbonate and supplied for painting, so the red, black and gray livery can be built up with clean color separation and race-focused detail. Sponsor-style markings, the number 23 graphics, window tint areas and exterior mirrors add another layer of scale character once applied. The TT-02 chassis places the shaft-driven 4WD system in a straightforward layout that suits regular on-road running and keeps the mechanical package easy to understand during the build. Deep-dish wheels and slick tyres reinforce the circuit theme and match the body's wide, planted proportions. On a smooth car park, indoor hall or club track, the model combines visual drama with the direct feel of a 4WD touring chassis. Radio gear, a battery pack, a charger and paints are required separately. After assembly and finishing, the Motul Autech Z 2023 works equally well for driving sessions, display between runs, or adding a modern Super GT shape to an RC collection.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan Skyline GT-R R33, RC kit, TT-02D

€194.99

The 1:10 Nissan Skyline GT-R R33 RC assembly kit pairs the unmistakable shape of the fourth-generation Skyline with the TT-02D platform, a drift-focused version of the TT-02 chassis. With its 257 mm wheelbase, detailed polycarbonate body and large rear spoiler, the model brings the long, low stance of the R33 into a format built for controlled slides and precise line changes. The body shell is supplied with masking film for the windows, making paint preparation more straightforward while keeping the glazing areas crisp. An aluminum radiator detail adds another visual accent to the finished shell, and included stickers complete the exterior markings. Under the body, the shaft-driven 4WD layout channels power through a protected drivetrain, a useful setup when repeated drift runs put constant load through the transmission. CVA oil pressure shock absorbers support stable chassis movement, and full ball bearings help the running gear move with less friction. The included electronic speed controller and 540 electric motor complete the core drive system. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor surface or a clean stretch of asphalt, the TT-02D layout supports long arcs, quick transitions and repeated practice laps. The finished chassis also leaves room to explore numerous TT-02 option parts available separately for further tuning and setup changes.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Calibra V6 Cliff, RC assembly kit

€149.99

The 1:10 Opel Calibra V6 Cliff RC assembly kit brings 1990s touring car presence to the bench and the circuit with a low, wide body shape and a shaft-driven 4WD layout underneath. At 448 mm long, 185 mm wide and 128 mm high, with a 257 mm wheelbase, the model carries the proportions of the full-size race car into a format built for on-road running. The clear polycarbonate bodyshell is supplied with separate side mirrors and a rear wing, so the finished shell gains extra depth once painted and detailed. Stickers and masking stickers support the paint job and help place the Cliff race livery with crisp separation lines. The TT-01 Type-E platform places the drivetrain in a balanced bathtub frame, a layout widely used for approachable electric touring car builds. Silver ABS dish wheels complete the period race look and sit neatly under the broad fenders of the Calibra V6 body. This assembly kit suits focused build sessions as much as driving time, with each stage moving from body finishing to chassis setup in a clear sequence. On smooth tarmac and similar on-road surfaces, the long wheelbase, 4WD system and touring car proportions combine into a planted, circuit-style driving feel. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Opel Kadett GT/E Rally, RC assembly kit

€154.99

The 1:10 Opel Kadett GT/E Rally assembly kit pairs a classic 1970s rally coupe with the adaptable MB-01 chassis for a build that combines scale presence and tunable drivetrain layout. Its clear polycarbonate bodyshell recreates the Opel Kadett GT/E in the works Opel Eurohändler team color scheme, with an overall length of 417 mm, width of 174 mm and height of 138 mm. This version uses the long 239 mm wheelbase and an MR layout with a midship rear motor and rear-wheel drive. The compact MB-01 platform also allows changes between front-wheel drive and rear-wheel drive by altering the attachment directions of the final gears and steering linkage while keeping the battery pack, motor and R/C equipment on the center frame. For rear-wheel-drive setups, the motor position can be selected low or high. Unitized sections for the motor mount, final gears and suspension keep the structure organized during the build and simplify maintenance after running sessions. Front and rear 60 mm tires suit the on-road character of the chassis, and 60D tires are specified for tire changes. The kit includes a 540 motor, an electronic speed controller, a clear body and manual. Radio gear, a battery pack, a charger and paints are required separately. The unpainted bodyshell leaves room for a faithful finish based on the rally livery shown in the kit design.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Peugeot 306 Maxi, RC assembly kit, BT-01

€184.99

The 1:10 Peugeot 306 Maxi RC assembly kit combines rally hatchback character with the adaptable BT-01 chassis, creating a model that looks purposeful on the bench and composed on on-road circuits. Its 404 mm length, 187 mm width and 155 mm height give the compact body a full, planted presence, while the standard 257 mm wheelbase matches the recommended FF layout used for this version. The bodyshell recreates the Peugeot 306 Maxi in lightweight polycarbonate, and separate molded parts add the side mirrors and rear wing as distinct exterior details. New markings are supplied for this release, while the livery graphics are Tamiya originals. Under the shell, the 2WD BT-01 platform is built around unitized sections for the motor mount, final gears and suspension, which helps keep the structure organized during assembly and maintenance. The center frame allows drivetrain changes by switching the attachment directions of the final gears and steering linkage, and rear-wheel-drive setups can use either a front motor or midship rear motor position. Radio gear, a battery pack and a charger are required separately. On the road, the combination of racing radial tires, double wishbone suspension and friction dampers suits smooth tarmac driving and repeated practice sessions. The detailed rally shape, separate aero parts and original markings also give the finished car a strong shelf presence between runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Peugeot 306 Maxi, RC assembly kit, BT-01

€189.99

This 1:10 R/C assembly kit captures the Peugeot 306 Maxi with the compact stance, widened fenders and roof spoiler that defined the rally car. The lightweight polycarbonate bodyshell comes pre-painted in Brilliant Blue with Smoke windows, and the pre-cut wheel arches plus pre-made body mount holes reduce body preparation before the chassis setup begins. At the center is the 2WD BT-01 chassis, built around a layout that can be reconfigured for 2 wheelbases and for front- or rear-wheel drive. The center frame keeps the battery pack, motor and R/C equipment positions together while changes to the final gear attachment direction and steering linkage switch the drivetrain layout. For rear-wheel drive cars, the motor position can be selected as front motor or midship rear motor. The chassis uses 4-wheel double wishbone suspension with a symmetrical structure and friction dampers, and unitized sections for the motor mount, final gears and suspension support organized assembly and maintenance. Overall dimensions are 404 mm long, 187 mm wide and 155 mm high, with a 257 mm standard wheelbase on this version. The included 540 Torque Tuned motor and electronic speed controller establish the drive package for a focused build with clear mechanical character. Radio gear, a battery pack and a charger are required separately. On the bench or in running sessions, the combination of rally bodywork and configurable BT-01 architecture gives this Peugeot 306 Maxi a strong link between scale detail and chassis experimentation.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR 2.8, RC assembly kit

€194.99

This 1:10 RC assembly kit pairs the unmistakable shape of the Porsche 911 Carrera RSR 2.8 with the adaptable BT-01 chassis, creating an on-road model that combines classic racing style and configurable mechanical layout. The lightweight polycarbonate body captures the low roofline, wide rear arches and purposeful silhouette in a form that suits both careful building sessions and finished shelf presence. At 457 mm long, 204 mm wide and 138 mm high, the model uses a 251 mm short wheelbase that matches the compact proportions of the full-size racer. The 2WD BT-01 platform is designed around changeable drivetrain architecture: attachment directions for the final gears and steering linkage can be altered to switch between front- and rear-wheel drive, while rear-wheel-drive builds can use either FR or MR motor position. Symmetrical 4-wheel double wishbone suspension and friction dampers give the chassis a clean, technical layout, and unitized sections for the motor mount, final gears and suspension keep the structure organized during the build and later maintenance. Silver wheels with a narrow front and wide rear arrangement reinforce the period racing look, and the separate red wheel caps add another layer of visual detail. A separate molded side mirror finishes the body shell with a distinct scale touch. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR 2.8, RC assembly kit

€199.99

This 1:10 R/C assembly kit captures the compact racing shape of the Porsche 911 Carrera RSR 2.8 on the BT-01 chassis, pairing classic motorsport lines with a configurable 2WD layout. At 457 mm long, 204 mm wide and 138 mm high, the model has a planted on-road presence, while the lightweight polycarbonate bodyshell keeps the form crisp and detailed. The BT-01 center frame is designed so the battery pack, motor and R/C equipment can stay in place while the attachment directions of the final gears and steering linkage are changed to switch drive layout. Rear-wheel drive cars can also use front motor or midship rear motor positions, which gives the chassis a broader tuning range within one platform. Symmetrical 4-wheel double wishbone suspension and unitized sections for the motor mount, final gears and suspension keep the structure organized for assembly and maintenance. The body arrives pre-painted in PS-1 White, with PS-31 Smoke on the windows. Silver wheels with a narrow front and wide rear format reinforce the period racing look, and the slick tire setup suits smooth-surface running. Separate red wheel caps and a separate molded side mirror add finishing detail that stands out when the car is lined up on a shelf or set down for a session on asphalt. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR, RC assembly kit

€164.99

The 1:10 Porsche 911 Carrera RSR RC assembly kit brings classic racing shape to the TT-02 platform, pairing a detailed polycarbonate body with shaft-driven 4WD for controlled running on a proven chassis. At 457 mm long, 204 mm wide and 136 mm high, the model carries the low, wide stance of the original car while the integrated rear wing keeps the silhouette true to the RSR form. The TT-02 tub frame layout uses a central drive shaft to link front and rear drivetrains, and the front and rear cone differentials each use 4 bevel gears to distribute power across the axle. Toe adjustment at the front allows setup changes, while the battery compartment is designed to accept different battery types. Wheel width and diameter are 27/67 mm at the front and 32/67 mm at the rear, matching the slick tyre setup and the 251 mm wheelbase. The kit also contains a decal sheet, window masking film, an electronic speed controller and a 540 electric motor. Assembly and finishing shape the final look, with the unpainted body ready for the chosen livery and separate mirrors adding another exterior detail once fitted. On a smooth track or open paved space, the combination of adjustable gearing, independent suspension and all-wheel drive supports steady test runs, tuning sessions and repeat laps with the same chassis.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 (992), RC assembly kit, TT-02

€159.99

The Porsche 911 GT3 (992) arrives here as a 1:10 R/C model assembly kit with the low, wide stance and track-focused shape of the road car translated into a detailed polycarbonate shell. At 467 mm long, 188 mm wide and 131 mm high, the body gives the chassis a planted on-road profile, while the separate polycarbonate rear wing and light cases add extra depth to the finished exterior. Under the shell, the model uses the TT-02 platform with shaft-driven 4WD and a 251 mm S-size wheelbase. That layout keeps the driveline direct and leaves room for the adaptable chassis design that has made the TT-02 a long-running choice for touring car builds. A Type 540 Torque-Tuned motor and included ESC complete the drive package named in the kit contents. The body set also uses separate black molded parts for the side mirrors and wing stays, plus a Urethane Bumper L compatible with TT-01 and TGS applications. This assembly kit suits bench building, body finishing and on-road driving as distinct parts of the hobby. Stickers and masking stickers support the paint process and exterior markings, while radio gear, a battery pack, a charger and paints are required separately before the chassis can run.

Off-road RC cars

1:10 Porsche 911 GT3 992, RC assembly kit, TT-02

€184.99

This 1:10 R/C model assembly kit brings the Porsche 911 GT3 992 into a hobby format with a sharply formed polycarbonate body, separate rear wing and separate light cases. At 467 mm long, 188 mm wide and 131 mm high, the finished car has the low, stretched proportions that make the full-size GT3 instantly recognizable on the bench and in motion. The TT-02 chassis gives the model a 251 mm S-size wheelbase and a shaft-driven 4WD layout, pairing straightforward construction with a platform known for adaptable setup options. Separate black molded parts depict the side mirrors and wing stays, adding extra definition where painted body shells often flatten smaller details. Dark gun metal dish wheels sit under the body with a purposeful fit, and the included Urethane Bumper L supports the front end during running. The kit also comes with stickers and masking stickers, helping the paint scheme and exterior markings land with cleaner edges. During assembly, the separate wing, light cases and mirror parts create a more layered finish than a one-piece shell alone. Once built, the 4WD layout, radial tire setup and 251 mm wheelbase suit repeated laps on paved sections, car park courses and mixed club surfaces. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 RAYBRIG NSX Concept-GT, RC kit, TT-02

€159.99

The 1:10 RAYBRIG NSX Concept-GT kit brings Super GT styling to the TT-02 platform with a 257 mm wheelbase and a detailed polycarbonate body. Low front bodywork, sculpted front and rear sections, and the race car profile give the finished chassis a focused touring car look on the bench and on the track. Separate parts recreate the rear wing and door mirrors, adding extra definition to the silhouette beyond the main body shell. Black 10-spoke wheels match the competition-style bodywork and support the model's race-inspired stance. Body markings are included for the livery, and masking stickers are supplied for the painting stage. The TT-02 layout is designed for straightforward maintenance, with the shaft-driven 4WD system arranged in a clean, accessible format. Radio gear and a battery pack are required separately. During the build, the body shell is trimmed, painted and finished with markings before mounting to the chassis, creating a hands-on modelmaking process as well as a running R/C car. Once assembled, the combination of the 540 Torque Tuned motor, enclosed driveline layout and touring car proportions suits regular circuit sessions, display between runs, and further tuning with TT-02 option parts available separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse, RC assembly kit

€164.99

This 1:10 RC assembly kit pairs the compact Fiat Abarth 1000 TCR Berlina Corse with the MB-01 chassis, creating a model that combines classic touring-car character with a highly adjustable 2WD layout. The clear polycarbonate bodyshell captures the widened fenders, compact proportions and racing stance in a lightweight form suited to hobby assembly. At the core is the multi-purpose MB-01 platform, which can be built with 209 mm, 224 mm or 239 mm wheelbase settings and configured for either front- or rear-wheel drive, giving 6 total setup patterns. Rear-wheel drive layouts also allow a choice of low or high motor position, adding another layer of chassis tuning. Unitized sections such as the motor mount and final gears simplify maintenance access and keep setup changes straightforward. A 540 motor and electronic speed controller are included, and the standard 29T pinion gear gives a 5.83:1 gear ratio. The symmetrical 4-wheel double wishbone suspension uses friction dampers, and the chassis is also compatible with many Hop-Up Option parts for M-chassis and TT-chassis cars. On the finished car, the front 55 mm tires and rear 60D tires echo the staggered tire sizing of the original racer and give the model a distinct stance on the track. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Renault Alpine A110 Jaeger RC assembly kit

€164.99

This 1:10 RC assembly kit recreates the Renault Alpine A110 Jaeger in its 1973 racing livery on the M-06 platform, combining a compact coupe silhouette with rear-wheel drive proportions. At 395 mm long, 168 mm wide and 121 mm high, the finished model has a low, planted stance, while the 210 mm wheelbase keeps the classic short-wheelbase layout true to the subject. The bodyshell uses 1.0 mm polycarbonate, and the separate detail parts let the front and rear sections stand out with more definition after painting and final assembly. Stickers are included for sponsor logos, race numbers and other markings, and masking stickers support clean window and light areas during the paint process. The orange Jaeger livery links the model to the Alpine A110 that raced in period circuit competition, while the coupe form reflects the lightweight original introduced in 1963. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the shell offers a focused finishing sequence with trimming, painting and decal placement before mounting to the chassis. Once assembled, the RR layout, short wheelbase and axle-specific tire combination give the model a distinct driving character for home tracks, club sessions or display between runs.

On-road RC cars (2WD/4WD)

1:10 Skyline GT-R (R32), RC assembly kit, TT-02D

€234.99

The 1:10 Skyline GT-R (R32) RC assembly kit pairs the unmistakable shape of Nissan's 1989 performance icon with the TT-02D drift chassis for on-road driving that favors angle, control and scale presence. At 452 mm long with a 257 mm wheelbase, the finished car carries the long, low proportions of the R32 clearly across the body shell. The body is formed in lightweight polycarbonate and uses separate molded parts for the side mirrors and rear wing, so the shell keeps crisp exterior definition beyond the main molding. Marking stickers add the final exterior graphics, and export versions of the kit include LEDs. Under the shell, the TT-02D is the drift-spec version of the shaft-driven 4WD TT-02 entry chassis and is compatible with TT-02 option parts. The setup combines 24 mm drift tires, mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and an aluminum motor heat sink to support repeated on-road drift runs with stable response. This assembly kit suits bench building as much as driving time, with body trimming, painting and decal placement shaping the final finish before the chassis takes to smooth tarmac. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Subaru WRX STI, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Subaru WRX STI that won the SP3T class at the Nurburgring 24 Hours in May 2016, combining endurance-race character with the accessible layout of the TT-02 chassis. The lightweight polycarbonate bodyshell captures the aerodynamically optimized race form, and the see-through finish leaves room for a clean, detailed paint job. Separately molded side mirrors and rear wing add sharper definition to the shell, while the included stickers and masking stickers support an accurate recreation of the car's race markings. Gun metal mesh-style wheels give the model its competition look, and the slick tyres suit smooth running surfaces. The TT-02 platform is designed for straightforward maintenance and broad adaptability, which makes it a strong base for setup changes over time. An extensive line-up of optional TT-02 tuning parts is available for builders who want to refine the chassis further. On a paved circuit, the encapsulated 4WD system, independent suspension and 540 Torque-Tuned motor come together in a layout that suits repeated laps and steady control inputs. The kit contains the model, a detailed illustrated assembly manual, an electronic speed controller, a 540 electric motor and the polycarbonate body. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 T/GR Yaris Rally1 Hybrid, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the T/GR Yaris Rally1 Hybrid onto the TT-02 platform with a polycarbonate bodyshell that captures the compact, aggressive rally silhouette in 416 mm length, 190 mm width and 146 mm height. Separate polycarbonate front light cases add layered detail to the nose, while the 257 mm wheelbase gives the chassis the proportions required for this body style. Black molded parts reproduce the side mirrors, side ducts, caps and the 2-piece large rear wing, adding the distinct aero elements seen on the full-size rally machine. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward longitudinal layout that keeps the drivetrain centered and supports stable running characteristics. Dark gun metal multi-spoke wheels and racing radial tires complete the stance, while the included urethane bumper supports body fitment at the front. The box also provides stickers and masking stickers for the paint job, helping the livery and window areas come out with cleaner separation. On the bench, the kit offers a focused build with body finishing, chassis assembly and detail fitting all tied to one clearly defined rally subject. Once assembled, the combination of the Torque-Tuned motor and ESC supports brisk running sessions on paved ground, while radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Toyota 4x4 Pick Up Bruiser 2012 RC kit

€819.99

This 1:10 RC assembly kit recreates the Toyota Hilux Pick-Up RN36 with the tall, high-lift stance that made the 1980s truck so distinctive. At 525 mm long, 278 mm wide and 275 mm high, the model carries real visual presence, while the ladder frame layout brings the structure of the full-size vehicle into the build itself. The chassis uses a longitudinally mounted Type 540 motor, a shaft-driven 4WD system and front and rear 6-pinion differential gears. Gear ratios of 54.63:1 in 1st, 40.49:1 in 2nd and 27.92:1 in 3rd define how the 3-speed transmission changes the driving feel across terrain. Front tread measures 200 mm, rear tread 218 mm, and the complete model weighs 3.2 kg. Metal parts are used throughout for a strong mechanical look, and the live axle setup reflects the full-size truck with metal axle housings, leaf springs and oil dampers. The detailed body, flared fenders and large tyres suit shelf display just as naturally as outdoor running on loose ground. Radio gear, a battery pack, a charger, transmitter batteries and an electronic speed controller are required separately.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

This 1:10 RC assembly kit brings the Toyota Celica GT-Four RC (ST185) onto the TT-02 platform with a bodyshell that carries the coupe's curved profile, rear wing, side mirrors and distinctive rally-era character. At 450 mm long, 187 mm wide and 136 mm high, with a 257 mm wheelbase, the finished car has the proportions to fill the chassis cleanly and present the Celica shape with convincing scale presence. The bodyshell uses 1.0 mm polycarbonate, keeping weight low while allowing the painted finish and sticker set to define the model's exterior details. Masking stickers are supplied for the window areas, helping the paint job stay crisp around the glazing lines. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward drivetrain layout that suits regular on-road running and setup work alike. An included Type 540 Torque-Tuned motor and ESC complete the core drive package for electric RC use. 5-spoke wheels and tread pattern racing radial tires reinforce the road-going look and match the Celica's classic performance style. On a smooth car park, club track or driveway, the combination of 4WD traction and the TT-02 layout supports controlled cornering and clean acceleration. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

The 1:10 Toyota Celica GT-Four RC assembly kit brings the shape of the ST185 to the TT-02 platform with a pre-painted 1.0 mm polycarbonate bodyshell, white finish, smoke-tinted windows and a full-size stance set by the 257 mm wheelbase. At 450 mm long, 187 mm wide and 136 mm high, the model carries the proportions of the homologation road car into an on-road R/C format with clear visual presence. The TT-02 chassis uses a shaft-driven 4WD layout and front and rear double wishbone suspension with coil spring dampers, giving the running gear a straightforward, widely used base for tuning and maintenance. Pre-cut wheel arches and pre-made body mount holes reduce body preparation work, while stickers and masking stickers support the final exterior finish. The bodyshell still requires cutting out, attachment work and detail painting on selected parts. Cockpit parts and driver are not included. On-road sessions highlight the long, curved body lines, rear spoiler and 5-spoke wheel design as the car tracks through sweepers and tighter sections. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four, RC kit, TT-02 4WD

€149.99

The 1:10 Toyota Celica GT-Four on the TT-02 chassis brings classic rally styling into an RC assembly kit with a strong visual link to the ST165 competition car. White, red and black race graphics, a rear spoiler and multi-spoke wheels give the finished model a focused motorsport look that stands out on smooth tarmac and indoor driving surfaces. The clear polycarbonate bodyshell is trimmed, painted from the inside and finished with window masks and a full marking set, so the build combines chassis assembly with body preparation and livery work. The body set specification gives a 257 mm wheelbase, which aligns the coupe proportions with the chassis layout. Mounting points are prepared with 6.5 mm holes, and the body is secured with 6 mm snap pins once fitted to the posts. Tinted window treatment, grille paint areas and wheel markings add extra finishing steps that sharpen the scale appearance without changing the underlying ST165 form. On-road running suits the rally-inspired shape especially well, whether the model is being built for regular RC sessions or for shelf display between drives. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Toyota GR 86, RC assembly kit, TT-02

€154.99

The 1:10 Toyota GR 86 brings modern coupe styling to a radio control build centered on the TT-02 chassis, a shaft-driven 4WD platform made for on-road running. Its 257 mm wheelbase gives the body its correct stance over the chassis, and the low, wide shape reads clearly whether the car is lining up for a first shakedown run or sitting on the bench between build stages. The body is formed in polycarbonate and arrives as an assembly kit, so the shell is trimmed, painted and finished with markings during the build. Separate sidemirrors, light cases, masking stickers and body fittings add definition to the final look, while the body mounts are adjusted so the shell clears the tyres and track surface correctly. Front and rear suspension geometry is handled by double wishbones with coil spring damping, a layout that supports predictable handling on paved surfaces. The package also includes an electronic forward and reverse speed controller. Radio gear, a battery pack, a charger and paints are required separately. On the workbench, the GR 86 body gives the build a clear sequence of cutting, masking and finishing steps that show off the model's detailed lines. Once assembled, the TT-02 platform suits car park sessions, smooth tarmac circuits and other paved spaces where a 4WD touring chassis can stretch out cleanly.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€264.99

This 1:10 RC assembly kit recreates the Toyota Land Cruiser 40 with the upright proportions and expedition character that made the original 4WD so distinctive. At 390 mm long, 198 mm wide and 237 mm high, the model has a substantial trail-ready presence, and the polycarbonate body keeps the shell light while preserving the crisp, boxy silhouette of the 1972 FJ40V. Under the body sits the CC-02 cross country chassis, developed for off-road driving and built around a ladder frame layout inspired by full-size vehicles. The 252 mm M-size wheelbase sets the proportions, and short 76 mm propeller shafts are included as part of the drivetrain package. Separately molded roof rack and light pod parts extend the scale look above the body line, while the detailed shell is joined by grille, mirror and indicator components that sharpen the finished appearance. A Type 540 motor and included ESC complete the core running hardware. The clear body is supplied unpainted, leaving room for a custom finish on domestic or export style builds. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the combination of block tread tires, scale bodywork and cross-country chassis layout suits rocky paths, compacted dirt and shelf display between running sessions.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€274.99

The 1:10 Toyota Land Cruiser 40 assembly kit brings classic 4WD character to the CC-02 platform with a yellow pre-painted body and the upright proportions of the 1972 FJ40V. At 390 mm long, 198 mm wide and 237 mm high, the model has the tall, square stance that makes the Land Cruiser 40 instantly recognizable on a trail course or shelf. The polycarbonate bodyshell keeps weight down, while separate molded parts add definition to the grille, mirrors, turn signals and roof rack with light pods. A 252 mm M-size wheelbase sets the proportions on the chassis, and the included 76 mm short propeller shafts match the layout. Oil-filled dampers support the chassis over uneven ground, and the ladder frame construction follows the full-size vehicle theme with a structure suited to cross-country driving. Silver 12-spoke wheels and block pattern tires complete the period look, and the sticker set combines window and window frame sections to reduce extra paint work during finishing. Cockpit parts and a driver figure add another layer of scale detail once the body is completed. The finished model suits slow trail sessions, obstacle lines and display between runs, with the roof rack, raised ride height and classic Land Cruiser shape giving it a strong presence in each setting. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, BT-01

€184.99

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the adaptable BT-01 platform for a build that stays engaging well beyond the first setup. At 457 mm long, 185 mm wide and 135 mm high, the finished car carries a strong on-road stance, while the 257 mm wheelbase gives the Supra body its stretched, planted proportions on the chassis. The BT-01 center frame is designed so battery pack, motor and R/C equipment can stay in place while drivetrain layout changes are made around them. By changing the attachment directions of the final gears and steering linkage, the chassis can be reconfigured between front-wheel drive and rear-wheel drive layouts. For rear-wheel drive, both front motor and midship rear motor positions are available, giving 6 total setup patterns across the platform. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further tuning. That combination suits builders who enjoy comparing chassis behavior on the same body shell instead of moving to a completely different car. On-road sessions, setup testing and workshop adjustments all gain extra depth from a platform that can be rebuilt around different drive and motor positions while keeping the Toyota Supra (JZA80) identity at the center of the project.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Tundra HighLift, RC assembly kit

€559.99

The 1:10 Toyota Tundra HighLift brings the shape of the second-generation double cab pickup into an RC assembly kit with a tall stance, large-diameter tyres and a chassis layout that follows the full-size truck closely. At 500 mm long, 216 mm wide and 238 mm high, the model has a broad road presence, and the combination of an injection-moulded bodyshell and exposed underframe gives it a convincing scale look whether it is parked on a shelf or moving over rough ground. Much of the character comes from the construction itself. Metal parts are used for the ladder frame, leaf springs and friction dampers, so the running gear has the same visual weight as the body above it. An RS540 motor and ESC handle the drive, while the 3.1 kg chassis gives the truck a planted feel. The set also contains custom parts including a roll bar, grille guard and roof carrier with 2 snowboards, allowing different finished looks without changing the core truck design. The 3-speed gearbox and shaft-driven 4WD suit slow trail sections, uneven surfaces and more open stretches where the taller ratio can be used. On a workbench, the detailed mechanical layout keeps the build engaging; on the ground, the long frame, rigid axles and pickup proportions create the unmistakable presence of a lifted truck. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TRF104 Chassis Kit, RC assembly kit, 2WD

€419.99

The 1:10 TRF104 chassis kit is an RC assembly kit built for 2WD formula on-road racing, with a low, technical layout that keeps key masses near the center of the chassis. At 325 mm long, 169 mm wide and 46.5 mm high, the platform presents a compact competition footprint shaped around tuning access and precise setup work. Carbon fiber and aluminum parts define the structure, including 2.5 mm thick carbon fiber front lower suspension arms and a carbon fiber rear shaft in the differential unit. The front lower arms offer 2 attachment positions with 3 mm adjustment per side to alter width for different wheel offsets. A laid down steering servo sits about 30 mm farther back than on the TRF103 chassis, helping lower the center of gravity, while the ackerman plate gives 4 steering linkage settings across about 1.8 mm. Sealed ball bearings are included in 1060, 1050, 1150 and 1280 sizes. The rear wing mount can also be configured in 2 ways, using a 2 mm thick carbon fiber plate on the motor mount or an optional stay arrangement on the suspension plate. On a smooth circuit, the tuning range supports detailed setup changes for grip, steering response and chassis attitude. Compatible LF1100-6.6V battery packs fit the included middle-size holder, and a square holder for Li-Po packs is also included. Body parts, front and rear wings, a motor, wheels, tires, radio gear, batteries for transmitter, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TT-02BR Chassis Kit Buggy, RC assembly kit

€339.99

The 1:10 TT-02BR Chassis Kit Buggy is an RC assembly kit built around the TT-02BR platform, an upgraded version of the TT-02B layout for off-road running and setup-focused tuning. A transparent Neo Scorcher body sits over a shaft-driven 4WD chassis with double wishbone suspension, full ball bearings and a 540 Torque-Tuned motor, giving the build a competition-style mechanical layout with clear room for adjustment. New aluminum propeller joints and a TT-02 aluminum propeller shaft work with plastic joint sections to limit wear at the joint cups during repeated running. Longer turnbuckle shafts, extended by 4 to 6 mm, help prevent deformation at the adjuster sections and support smoother suspension movement. Steering linkage with flange pipes uses hex head screws and lock nuts, and the chassis also features reinforced gear covers, lower suspension arms, a hard lower deck and aluminum rear uprights. Large dish wheels, spike tires and the tube frame chassis complete the off-road specification. The included carrying case keeps the TT-02BR chassis together between bench sessions and track days. Radio gear, a battery pack and a charger are required separately. The transparent body is supplied without Neo Scorcher coloring stickers, which leaves the finish open to an individual paint scheme.

On-road RC cars (2WD/4WD)

1:10 TT-02D Drift Spec Chassis, RC assembly kit

€149.99

The 1:10 TT-02D Drift Spec Chassis is an RC assembly kit built around a 4WD drivetrain, a central drive shaft and a tub frame layout shaped for low contact with the road surface. With a length of 376 mm, a width of about 182 mm and a 257 mm wheelbase in the standard setup, the chassis presents a planted stance for drift-focused running on smooth tracks and paved areas. Cone differentials front and rear use four bevel gears, while the fully ball-bearing drivetrain supports efficient power transfer from the included RS-540 Sport Tuned motor. An aluminum heat sink is included for the motor area, and the battery compartment is designed to accept all battery types named for this chassis format. Metal-plated brake disc-style wheel hubs in silver and a blue battery holder add distinct visual detail to the exposed layout. The chassis also allows a normal 258 mm setting and a short 252 mm wheelbase configuration, giving extra scope when matching the platform to different body fits and handling preferences. A separately sold body can be fitted to the chassis, making the platform suitable for custom drift builds with different shells and finishes. Radio gear, a battery pack and a charger are required separately for operation, so the kit can be completed around preferred running equipment.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TT-02R Chassis Kit, RC assembly kit, 4WD

€199.99

The 1:10 TT-02R Chassis Kit is an RC assembly kit built around a race-focused 4WD platform with a compact 376 x 182 mm footprint. Blue anodized tuning parts, aluminum hardware and a low, open chassis layout give the build a technical look while keeping the mechanical details easy to follow on the bench and easy to read at the track. This R version adds lightweight aluminum rear uprights, an aluminum motor mount, an aluminum propeller shaft and aluminum joints to key areas of the chassis. The drivetrain also uses metal wheel axles and gearbox joint cups, while a urethane bumper sits at the front. Medium-narrow racing slicks measure 24 mm in width and work with the included wheels to suit circuit-focused running. The kit format leaves room for a chosen body style and electronics setup, while the TT-02 base keeps the layout familiar for tuning and maintenance. During assembly, the exposed suspension arms, steering linkages and central drivetrain make setup changes straightforward to understand. On a paved track, the chassis layout, slick tire format and damping hardware support clean lap work, repeated corner entries and focused tuning sessions. Radio gear, a battery pack, a charger, a motor and a body are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Volkswagen Beetle, RC assembly kit, M-06

€189.99

The 1:10 Volkswagen Beetle RC assembly kit pairs one of motoring's most recognisable silhouettes with the modern M-06 chassis, creating a model that looks instantly familiar and drives with a distinctly rear-driven character. Its clear polycarbonate bodyshell recreates the rounded roofline, curved fenders and compact proportions of the Beetle, while chrome-plated mirrors, bumpers and wheels add bright period-correct accents across the exterior. Beneath the shell, the M-06 platform places the motor at the rear and sends power to the rear wheels, a layout that suits the Beetle theme and gives the chassis its own handling feel. A Type 540 electric motor and electronic speed controller are included in the kit. The chassis also uses an adjustable wheelbase of 210 mm, 225 mm or 239 mm, with this version set at 239 mm. Track width is 138 mm, wheel offset is 12 mm, and the tyres measure 59 mm in diameter and 25 mm in width, giving the model a planted stance matched to its compact body dimensions. At 397 mm long, 163 mm wide and 145 mm high, the finished Beetle has a size that reads clearly on the road and on display. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, it suits smooth car park runs, club practice sessions and careful shelf placement where the Beetle body can be appreciated between drives.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Volkswagen Golf II GTI 16V, RC assembly kit

€164.99

This 1:10 R/C model assembly kit captures the Volkswagen Golf II GTI 16V in a compact hatchback form with a lightweight polycarbonate bodyshell and a long 239 mm wheelbase. At 383 mm long, 170 mm wide and 138 mm high, the model combines classic road-car proportions with a chassis layout built for hands-on assembly and tuning. Under the shell sits the MB-01 chassis in a front-motor, front-wheel-drive configuration. Its center frame allows changes between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage, and rear-wheel-drive setups can also use a low or high motor position. The chassis also offers 3 wheelbase choices, giving broad scope for layout changes within the same platform. A 4-wheel double wishbone suspension with symmetrical structure and friction dampers manages movement at each corner, while unitized sections for the motor mount, final gears and suspension support straightforward maintenance. Separate black molded parts depict the side mirrors and bumpers, and transparent parts form the headlights and taillights for a more complete exterior finish. Porous dish wheels are paired with radial tires to match the road-car character of the subject. The bodyshell is not pre-painted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 VW Beetle Rally, RC assembly kit, 4WD

€174.99

The 1:10 VW Beetle Rally pairs a classic rally silhouette with the MF-01X chassis, creating an RC assembly kit that looks distinctive on the bench and carries that character onto road and flat dirt. At 397 mm long and 163 mm wide, the model uses a 239 mm L wheelbase that gives the Beetle body its correct stance while leaving room for the shaft-driven drivetrain layout underneath. The clear polycarbonate shell recreates the Beetle's rounded form, and separate metal-plated parts are used for the bumpers and side mirrors. Front light pods and rally-style stickers shape the competition-inspired finish without changing the unmistakable Beetle profile. Under the shell, power from the Type 540 Torque Tuned electric motor is transmitted through gear differentials, with drive routed to the rear wheels and forward by propeller shaft to the front axle. The chassis can also be assembled into S and M wheelbases with separately sold propeller shafts. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On smooth tarmac, the 4-wheel double wishbone layout helps the chassis stay composed through direction changes, while on flat dirt the rally block tires and independent suspension work with the shock absorbers to keep the model moving with control. The result is a build that combines detailed body finishing, mechanical layout and mixed-surface running in one focused RC project.

On-road RC cars (2WD/4WD)

1:10 VW Golf II GTI 16V, RC assembly kit, MB-01

€185.99

This 1:10 R/C assembly kit captures the Volkswagen Golf II GTI 16V in rally form on the MB-01 chassis, pairing a compact hatchback shape with a front motor, front-wheel drive layout. The lightweight polycarbonate bodyshell arrives pre-painted in PS-34 Red with PS-31 Smoke, so the body lines, window tint effect and overall stance come together quickly once mounted on the chassis. The model measures 383 mm in length, 170 mm in width and 138 mm in height, with a long 239 mm wheelbase that suits the MB-01 configuration used here. Separate black molded parts recreate the side mirrors and bumpers, while transparent components depict the headlights and taillights with added depth. A 540 torque-tuned electric motor and an electronic speed controller are included. The MB-01 platform also uses unitized sections for the motor mount, final gears and suspension, a layout that keeps the structure organized during assembly and later maintenance. On the bench, the combination of 4-wheel double wishbone suspension, friction dampers, porous dish wheels and radial tires gives the chassis a clear mechanical character. Once built, the compact proportions and FF drivetrain make it well suited to tight driving lines and flowing runs on smooth ground. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 VW Karmann Ghia, RC assembly kit, M-06

€174.99

The 1:10 VW Karmann Ghia RC assembly kit brings a classic coupe silhouette to the M-06 platform, combining vintage road-car character with a rear-wheel-drive chassis layout. Its lightweight polycarbonate body reproduces the flowing roofline and compact proportions of the original, while separate plated parts for the side mirror, bumpers and light cases sharpen the finished look. This version uses the 239 mm wheelbase M-06L chassis. The rear-mounted motor works with a longitudinal battery pack, and the R/C units sit on either side to keep the layout low and evenly balanced. That arrangement gives the chassis a low center of gravity and a composed feel through direction changes. Marking stickers and masking stickers are included for the paint job, allowing the exterior trim and lighting details to be finished with clean separation. Metal-plated wheels complete the period look and work with the tyre setup to support stable cornering. With overall dimensions of 410 x 182 x 125 mm, the model has enough size to show off the Karmann Ghia shape both on the bench and in motion. It suits builders who enjoy body finishing as much as chassis setup, and it leaves room for later tuning with Hop-Up Option parts available for the M-06 platform.

Off-road RC cars

1:10 Wild Willy 2000, RC assembly kit, WR-02

€199.99

The 1:10 Wild Willy 2000 RC assembly kit brings the animated stance of the mid-1980s original into a WR-02 chassis layout built for rough-terrain driving. Its larger tires, rear-wheel-drive setup and fitted wheelie bar create the signature wheels-up action, while the olive-drab body, roll cage, roof lights and seated driver figure give the model a strong off-road character on the bench and in motion. At 345 mm long, 270 mm wide and 270 mm high, the chassis carries a 170 mm wheelbase and a weight of 1,360 g without R/C units or battery pack. A Type 540 motor sits on the centerline with the battery position aligned through the middle of the monocoque frame, and power travels to the rear wheels through a fully enclosed gearbox. The drivetrain uses 3-bevel differentials and a 1:18.3 gear ratio. Front and rear tire width and diameter measure 113/70 mm, with tread figures of 265 mm at the front and 270 mm at the rear. Tires and wheels plus the gearbox and motor come pre-assembled. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. The WR-02 layout suits loose ground, packed dirt and uneven garden paths where the larger tire footprint and 4-wheel double wishbone suspension can work through bumps and ruts. On a smooth stretch, the wheelie bar lets acceleration turn into the upright Wild Willy pose that made the original such a standout.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 XM-01 Pro Chassis Kit, RC assembly kit

€294.99

The 1:10 XM-01 Pro Chassis Kit brings a compact M-chassis format to a shaft-driven 4WD rally platform with a front mid-ship longitudinal motor layout and a covered central chassis. Through the clear polycarbonate sections and newly molded bathtub frame parts, the design focuses on keeping the running gear shielded while maintaining the technical look of a dedicated competition chassis. The rear section can be configured to 210 mm, 225 mm or 239 mm wheelbase, which gives the chassis broad body compatibility within M-rally builds. Suspension mounts set caster angle at 5 degrees, and aluminum dampers are fitted front and rear to support composed movement over uneven surfaces. Front and rear universal drive shafts come as standard, while the drivetrain uses oil-filled gear differentials at both ends. Drive balance can be tuned with the supplied 39T and 40T differential gears by changing the front and rear combination. The center-left battery position uses a longitudinal upright layout for chassis balance, and the front bumper uses a skid angle to reduce surface contact. M-Chassis 11-spoke racing wheels are paired with 60D rally block tires, giving the platform the stance and tread pattern suited to loose-surface running. A low-profile servo is recommended for clearance under the front inner polycarbonate cover. Body, motor, battery pack and R/C equipment are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 XV-01 Lancia Delta HF Integrale, RC assembly kit

€284.99

The 1:10 XV-01 Lancia Delta HF Integrale brings classic rally form to a front-motor 4WD platform built for active driving. Its 407 mm length, 186 mm width and 155 mm height give the bodyshell a planted stance, while the 257 mm wheelbase supports stable tracking through sweeping turns and quick direction changes on mixed surfaces. This RC assembly kit pairs the XV-01 layout with an electric Type 540 motor and rally-focused running gear. Block tread tyres on white wheels suit the car's off-road character, and the electronics box groups the receiver and controller inside the chassis. Metal-plated side mirrors and grille parts add crisp finishing detail beyond the main shell. The decal sheet and painting aid support accurate body finishing, and the illustrated assembly instructions guide the build. Radio gear, a battery pack, a charger and paints are required separately. On a compact dirt course, gravel path or smooth tarmac with dust and debris, the enclosed drivetrain layout and adjustable geometry give the chassis room to be tuned for the surface in use. The result is a rally model that combines scale presence, hands-on building and chassis setup in one focused machine.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:14 Buggyra Fat Fox, RC model kit, TT-01E

€179.99

The Buggyra Fat Fox brings European truck racing into a 1:14 RC model kit with a full racing-truck silhouette, detailed sponsor livery and the broad, purposeful proportions of the 2018 circuit machine driven by Adam Lacko. At 420 mm long, 187 mm wide and 188 mm high, the finished model has the visual presence of a race truck while staying sized for on-road RC running. Its body is formed from 3 clear polycarbonate sections, with separate rear fender and coupler parts that help capture the layered structure of the full-size truck. ABS side mirrors and a rear bumper attached to the chassis add extra exterior detail, while the included stickers recreate the #1 2018 season markings. The TT-01E platform uses a shaft-driven layout and comes with an electronic speed controller plus a Torque-Tuned motor. Wheelbase is 257 mm. Numerous option parts are available for tuning the chassis setup over time. This assembly kit suits builders who enjoy painting, detailing and setting up a race-inspired RC truck for smooth tarmac driving. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:14 M-B Race Truck Actros MP4, RC assembly kit

€179.99

The 1:14 M-B Race Truck Actros MP4 RC assembly kit brings European truck racing onto the workbench with the shape of the 2019 ETRC machine and the proven TT-01 Type-E platform underneath. Its 441 mm length, 188 mm width and 257 mm wheelbase give the finished truck the long, planted proportions that make a race hauler stand out on smooth on-road runs. The shaft-driven 4WD layout of the TT-01 Type-E chassis gives this model its drive system and easy handling character, while the racing truck body introduces a very different silhouette from a standard touring car. The polycarbonate shell is built as a new 3-part body, separating cab, body and coupler sections for a more defined scale appearance. Height is 194 mm, adding the tall cab profile that makes the Actros MP4 instantly recognizable in motion and at rest. Parts for installing headlight and taillight LEDs are included, with LEDs and light unit required separately. A battery pack, a charger and paints are required separately. On a clean indoor track or a smooth paved surface, the silver molded wheels and truck-specific radial tires suit steady laps and detailed body presentation alike. The sponsor markings, grille emblem and mirror parts give the finished build a race-day look that carries through whether the truck is being assembled, painted or lined up for display between runs.

On-road RC cars (2WD/4WD)

1:14 Team Hahn MAN TGS, RC kit, TT-01E 4WD

€179.99

The 1:14 Team Hahn MAN TGS brings European truck racing into RC form with a detailed cab, racing livery and the TT-01E chassis underneath. Its 3-piece polycarbonate body recreates the broad front, roofline and side sections of the full-size race truck, giving the finished build a strong track presence even before the first run. The subject is based on the Team Hahn Racing MAN TGS, the truck driven by Joachim Hahn to 3rd place in the 2015 European Truck Racing Championship. Crash protection is attached to the bottom of the chassis, adding a dedicated lower guard where the model meets the track surface. The kit also uses special truck rims and profiled truck tires to match the proportions of a racing truck rather than a touring car. Numerous tuning parts are available for the platform, opening the door to later setup changes around the same chassis layout. On the bench, the illustrated assembly manual guides the build of the chassis and body shell, while the painted and decaled cab develops its full race-truck character step by step. On the track, the long, tall truck silhouette and 4WD layout create a very different visual rhythm from a standard RC car, with the MAN TGS shape leaning into every braking zone and corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya 1:10 RC Toyota Tundra Bundle

Product bundle consisting of: 1:10 RC Toyota Tundra HighLift 3-Speed / FS Reflex Stick II 2.4 GHz 6CH   Article number: 300058415 Product: 1:10 RC Toyota Tundra HighLift 3-Speed Article number: 300058415 Product: RC Toyota Tundra HighLift 3-Speed The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism. ● Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. ● Motor: Type RS540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: Front/Rear 2-bevel Diff. ● Suspension: Fron/Rear Leaf Rigid ● Dampers: Front/Rear Friction Dampers ● Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top) ● Speed Controller: ESC     Article number: 500501006 Product: FS Reflex Stick II 2.4 GHz 6CH Carson Reflex Stick II 2.4 GHz (500501006) is an inexpensive, modern 6-channel remote control for RC vehicles and boats. Two joysticks, a button and a switch control six channels independently. Interference-free 2.4 GHz FHSS, servo reverse, trim function and charging socket; operates on 4×AA (6 V), BEC 4.8-6 V, Graupner J/R; recommended: Receiver 500501537 and AA batteries 500609042.  

On-road RC cars (2WD/4WD)

1:10 First Try On-Road, RC assembly kit, TT-02

soon available again

The 1:10 First Try On-Road brings the TT-02 platform into a semi-assembled RC assembly kit that puts the key mechanical parts in view from the start. The shaft-driven 4WD layout, rear-mounted motor and central battery position create a tidy chassis arrangement that is easy to understand while giving the car a planted feel on paved ground. The bare chassis shows how the drivetrain runs through the centre tunnel to link the front and rear gear sections, making the working principle clear during assembly and maintenance. Front and rear double wishbone suspension is paired with 4 coil spring dampers, and the separate shock units mount at each corner with eyelets for controlled wheel movement. Black multi-spoke wheels carry slick tyres for road-focused running, and the front foam bumper sits ahead of the chassis tub as a contact buffer. The battery area is marked for LF 6.6V, Ni-MH 7.2V and Ni-Cd 7.2V packs. Radio gear, a battery pack and a charger are required separately. On smooth car parks, driveways or other paved spaces, the low-tread wheel setup and 4WD transmission suit steady practice laps and first tuning sessions. The exposed layout also makes the model useful on the bench, where the steering linkages, spur gear area and suspension mounting points can be seen clearly during setup and upkeep.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 MB190 E Evo.2 Zakspeed, RC assembly kit

soon available again

This 1:10 RC assembly kit recreates the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II in a 445 mm long, 184 mm wide touring car format that brings classic DTM presence onto the TT-01 Type-E chassis. The polycarbonate bodyshell carries the sharp 190 E silhouette, while separate mirror, wing and grille parts add layered exterior detail around the plated Mercedes-Benz 3-star emblem. Marking stickers are included to apply sponsor logos, car numbers and race graphics that match the period competition look. Under the shell, the TT-01 Type-E uses a fiberglass reinforced nylon upper deck and gear covers, a 3-piece tie rod, front and rear differential gears, and 4-wheel double wishbone suspension. The chassis also uses a 257 mm wheelbase and places the motor and battery close to the ground to lower the center of gravity. A wide range of option parts is available for further tuning. The finished model suits on-road driving sessions where stable tracking, direct steering response and race-car styling matter as much as the build itself. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Sand Scorcher 2010, RC buggy, 2WD kit

soon available again

The 1:10 Sand Scorcher 2010 brings the rounded Baja buggy silhouette from the original 1979 release into an R/C assembly kit with rear-wheel drive 2WD mechanics and a detailed body shell. On sand and loose dirt, the layout combines the long-travel off-road stance with the direct feel of a classic buggy chassis, creating a model that looks distinctive even before the first run. The body is molded in white polystyrene and reproduces the one-make race buggy style seen at the Baja 1000 in California, while the kit also includes a polycarbonate body in the listed scope of delivery. A transparent mechanism case covers the R/C components and battery area, keeping the internal layout visible while shielding the running gear from dirt thrown up by the tyres. The chassis uses 4-wheel independent suspension with a front double trailing arm setup and rear swing axle arrangement, giving each corner room to work over broken ground. Reinforced front uprights add support at the steering end, and the 3-piece center-lock wheels carry grooved front tyres with ribbed rear tyres for terrain-specific grip. During outdoor running, the Sand Scorcher shows its character in broad slides, quick direction changes and the lifted stance of a desert racer. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Squash Van, RC assembly kit, 4WD GF-02

soon available again

The Squash Van pairs a 1:10 scale off-road van body with the GF-02 chassis for a build that combines retro panel van character and full 4WD running. At 454 mm long, 280 mm wide and 238 mm high, with a 267 mm wheelbase, the finished model has a broad, purposeful stance that looks at home kicking across grass, dirt and uneven ground. Its gear-driven layout places the motor low in the center of the monocoque frame, a configuration that helps keep weight balanced as power moves to both axles. The slim frame uses ladder and pipe motifs, giving the chassis a distinct mechanical look beneath the body. Integrated sealed gearboxes help keep stones out during off-road driving, and a motor guard adds extra protection in rough conditions. The steering servo sits on the left with identical-length tie-rods, a layout chosen for direct steering action. A Type 540 motor and ESC are included in the kit. The clear polycarbonate shell leaves room for a custom finish, while the supplied graphics bring in squash illustrations, the model logo and triple stripes for a bold vintage-inspired theme. This is an assembly kit, so radio gear, a battery pack, a charger and paints are required separately. Once built, the long wheelbase setup and oversized tires give the van a distinctive mix of scale presence and loose-surface driving fun.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TA08 PRO Chassis Kit, RC touring car kit

soon available again

The TA08 PRO Chassis Kit is a 1:10 R/C touring car chassis built around a stepped-V layout that balances rigidity with weight distribution for composed on-road running. Its battery pack and servo are mounted on a slight 10 degree angle, reducing surface contact and helping the chassis settle cleanly through direction changes. A spur gear positioned in front of the motor contributes to stable drivability, while the 2 belt-driven 4WD system works with TRF420 gear differentials and steel TA07 differential joint cups. Super Short Big Bore dampers, universal shafts and full bearings add further mechanical precision across the rolling platform. The A-arm suspension layout keeps the center of gravity low, and camber plus caster settings can be adjusted with turnbuckle shafts and lower arm spacers to refine the setup for track conditions. Body mounts rotate by 180 degrees to switch between standard and 2 mm advanced body positions, adding another tuning option when matching the chassis to a shell. This kit suits bench setup, circuit tuning and repeated on-road sessions where drivetrain response, suspension geometry and chassis balance all matter. R/C equipment, a motor, a battery pack, tires and a body are required separately.

Off-road RC cars

1:10 Toyota Land Cruiser LC300, RC assembly kit

soon available again

This 1:10 RC assembly kit recreates the Toyota Land Cruiser LC300 with the upright proportions and strong road presence of the full-size SUV. At 472 mm long, 200 mm wide and 192 mm high, the model has a substantial footprint, and the 267 mm wheelbase gives the body and chassis the stretched, planted look associated with the Land Cruiser name. The bodyshell uses 1.2 mm polycarbonate to keep weight down while preserving the shape of the LC300, and the finish is supported by separate detail parts that define key exterior areas. Metal-plated H parts depict the door mirrors, light cases and front grille sections, while pearl white molded K parts render the door handles and the shark fin antenna on the roof. A Type 540 motor and included ESC complete the drive package. The kit also includes the CC-02 chassis, whose ladder frame construction echoes full-size off-road engineering and suits cross-country running with 4WD control. On the trail, the combination of block pattern tires, oil-filled dampers and the CC-02 layout suits dirt paths, rocky sections and uneven ground where suspension movement and traction matter. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 VW Type 2 (T1), RC assembly kit, M-06

soon available again

This 1:10 RC assembly kit captures the Volkswagen Type 2 T1 in its 23-window Samba Bus form, pairing the unmistakable van body with the M-06L chassis for a layout that mirrors the rear-engine character of the original. The clear polycarbonate shell gives builders a lightweight body to finish, while separate molded parts add definition to the bumpers, side mirrors and lamp areas. Under the body, the M-06 chassis places the motor at the rear and drives the rear wheels, with the battery pack mounted longitudinally and the RC units arranged on the sides. That layout supports balanced weight distribution and a low center of gravity across the 239 mm wheelbase. A 540 motor and an electronic speed controller are included to complete the drive package, and metal-plated dish wheels reinforce the classic look once the shell is painted and trimmed. Many tuning parts are available as options for further chassis setup changes. On the bench, the body offers plenty of detail to bring out the split-window bus shape, roof glazing and trim lines with careful finishing. On the road, the rear-wheel-drive M-06L platform gives the model a character that suits the full-size Type 2 inspiration. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

Tamiya RC Honda Bundle

soon available again

Product bundle consisting of: 1:10 RC Honda NSX Racing Whi PB TT-02 / Tuning set TT-02 / 1:10 wheel set 14 Sp.Design (4) black Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.   Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set short (4), Ball bearing set (16)   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Ford Bronco 2021, RC assembly kit, CC-02

available in stores

This 1:10 RC assembly kit recreates the Ford Bronco 2021 with a 447 mm long body, a 204 mm width and a 233 mm height, giving the 2-door First Edition shape a strong cross-country presence on the CC-02 platform. The 1.2 mm polycarbonate bodyshell carries key Bronco cues such as round front lights, raised front fender lines and oblong taillights, so the finished vehicle reads clearly from front, side and rear angles. The CC-02 chassis uses a ladder frame inspired by full-size vehicles, combining the visual character of an off-road understructure with the rigidity needed for uneven terrain. A 252 mm wheelbase marks the first use of the M-size wheelbase with this chassis, matching the proportions of the Bronco body. PC-ABS H parts form the grille, mirrors, spare tire cover and door handles, while metal-plated K parts shape the light cases for added contrast in the exterior detailing. The standard PC-ABS roof rack extends the scale look and gives the upper bodyline extra depth. On rocky tracks, dirt paths or indoor test runs over improvised obstacles, the 12-spoke wheels and semi-pneumatic rubber tires help the model settle into rougher surfaces with a purposeful off-road stance. Parts for installation of headlight and taillight LEDs are included, adding another layer of finishing detail during the build. Radio gear, a battery pack, a charger and paints are required separately.