Model colours/paints/airbrush
Tamiya adds vibrant colour to model making with its premium paints, varnishes, and airbrush products. Click here for a clear and concise overview of the essential information and to explore more about our model making paints!
AS spray colours
AS-33 Camouflage Gray, paint spray, 100 ml
300086533€12.99
AS-33 Camouflage Gray is a 100 ml paint spray made for model finishing where an even, consistent coat matters across larger surfaces. The spray application helps lay down colour smoothly on broad panels and shaped parts, giving camouflage gray coverage that reads cleanly across the whole build. The 100 ml can size provides a practical amount for workshop use when several parts need the same tone. Spray paint is especially useful on shells, body sections and other exterior components where brush marks would interrupt the final look. Camouflage Gray fits military-inspired colour layouts and other subdued paint schemes that call for a restrained gray tone rather than a bright accent. The aerosol format also supports steady passes over curved contours, corners and recessed areas, which helps keep the finish visually consistent from one section to the next. On the bench, AS-33 Camouflage Gray suits fresh builds, repaint work and replacement parts that need to match an existing scheme. It can be used when a model calls for a single gray base coat or when several painted sections need the same colour family to tie the finished appearance together. Warning! Not suitable for children under 14 years.
Brushes & accessories
Blunt Brush S, modeling brush for detail painting
300087029€2.69
Blunt Brush S is a modeling brush shaped for precise paint application on small parts, fine edges and narrow details. The slim bristle tip and light wooden handle create a direct, steady feel at the bench, whether working on trim lines, cockpit details, figure accents or careful touch-ups on miniature surfaces. The brush is presented as a single fine-detail tool rather than a broad coverage brush, which makes it suited to controlled paint pickup and measured strokes. The handle marking identifies it as TAMIYA MODELING BRUSH 000, a format commonly chosen for very small painted areas where larger brushes can flood recesses or soften sharp borders. Its blunt brush designation adds another point of distinction within a hobby setup built around different brush shapes for base coating, lining and finishing. On a model-making table, this brush fits the moments that call for patience and accuracy: picking out raised details, refining painted borders and adding small color notes after the main coat has dried. It also works well as a dedicated brush kept aside for delicate corrections, helping maintain cleaner separation between tiny painted sections. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Chipping Liquid 40ml, finishing material bottle
300087225€6.49
Chipping Liquid 40 ml is a finishing material for plastic models that creates realistic weathering by letting the top paint layer lift away in controlled areas. Applied between a lacquer base color and an acrylic overpaint layer, the water-based formula helps recreate chipped edges, worn panels and damaged paint surfaces that suit military subjects and other heavily used vehicle finishes. The process is specific and hands-on. A thin coat of the liquid is applied by airbrush or brush over the dried base color, then covered with the hull color. Water is added only where paint wear is wanted; this softens the layer so the top color can be peeled away with a toothpick or similar tool. Used carefully, that sequence makes it possible to place scratches and chips where traffic, contact or exposed edges would naturally wear through. Used tools can be washed with water after the session. The 40 ml square bottle fits neatly on the workbench for detail-focused finishing sessions and small batch paint work. This material is oriented toward advanced modelers and works best when the paint sequence is followed closely, as the top color does not peel after it has fully dried. Brushes are not included. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 0, modeling brush, 4 mm
300087015€2.19
Flat Brush No. 0 brings a narrow 4 mm painting edge to model and hobby work where clean borders and controlled coverage matter. The flat horse-hair bristles pick up paint across a straight edge, making it easier to guide color onto trim lines, compact panels and other small sections that benefit from an even pass. The short square-cut bristle shape creates a defined contact line, while the metal ferrule holds that profile firmly between handle and brush head. A wooden handle is designed to reduce strain on the hand, which helps keep movements steadier through longer painting sessions and repeated touch-up work. This combination of flat tip, No. 0 size and 4 mm width gives the brush a focused role in a painting setup alongside broader brushes and finer pointed tools. On a workbench, the brush suits edging, filling small rectangular areas and laying down smooth coats on model parts that need more coverage than a fine point can provide. It also fits careful finishing passes where a straight bristle edge helps keep paint placement tidy around molded details and panel boundaries. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 01, modeling brush, slim tip
300087028€1.99
Flat Brush No. 01 is a slim modeling brush built for careful paint application on small surfaces and sharply defined edges. The narrow flat bristle shape gives each stroke a clear contact line, which helps when covering compact sections that need more direction than a round tip can provide. The brush combines a light wooden handle, a silver metal ferrule and a small brown bristle head in a straightforward format suited to hobby bench work. Its flat profile lends itself to edging, short pull strokes and controlled coverage across narrow panels or trim areas. The slim head also makes it easier to place paint into tight sections while keeping the stroke width consistent. For model makers working on fine brushwork, that shape supports neat transitions between painted areas and more deliberate handling around corners and borders. On a workbench, Flat Brush No. 01 fits detail painting sessions where small parts, edge lines or compact surfaces need a measured amount of paint. It also works well as a dedicated brush for touch-ups and careful finishing passes on model projects where a broader head would be less exact. Warning! Not suitable for children under 14 years.
Brushes & accessories
Flat Brush No. 5, modeling brush, flat bristles
300087013€3.19
Flat Brush No. 5 is a modeling brush built for broader painted areas that still need a clean, controlled edge. The flat bristle shape lays paint down in straight passes, which helps when covering body panels, aircraft wings or other larger model surfaces with a more even finish. The brush combines a light wooden handle with a silver-coloured metal ferrule and short, light-coloured bristles. That construction gives a familiar balance for hobby bench work and keeps the working end compact enough for guided strokes along edges, corners and raised details. The No. 5 size sits between very fine detailing tools and wider coverage brushes, making it a practical choice when a project moves from small accents to larger painted sections. It can also be used for controlled application of weathering materials or similar finishing media where a flat edge helps place material in a measured band. On the workbench, this brush fits naturally into model painting sessions that alternate between coverage and control. It suits plastic model kits, scale vehicles, aircraft, figures and scenery pieces where broad areas, trim lines and surface finishing often appear in the same build. For hobby painting routines that rely on clean edges and repeatable strokes, the flat profile gives a clear, predictable contact area on each pass. Warning! Not suitable for children under 14 years.
Brushes & accessories
HG II Flat Brush Medium, modeling brush, flat tip
300087215€10.79
The HG II Flat Brush Medium brings a broad, even painting edge to model work, with very fine PBT resin bristles shaped into a flat tip for smooth, soft brushstrokes. On body panels, interior parts and other flat sections, the medium width helps spread paint in a controlled band while keeping the stroke neat along edges. The brush combines white synthetic bristles, a metal ferrule and a long black handle with a squared end cap. Laser-engraved handle text identifies the HG II series and the medium size, with the size marking shown in Japanese. The handle material is solvent-resistant, a practical detail for sessions that involve hobby paints and common modeling solvents. At the end of the grip, a stopper helps keep the brush from rolling across the work surface and reduces the chance of the bristle tip being knocked out of shape. If that stopper is not needed, it can be cut off with side cutters. This flat brush suits coverage work that needs a cleaner edge than a round tip can provide, such as painting trim, raised details, larger flat areas or straight sections on scale models. It also fits bench setups where the brush is set down repeatedly between coats, washes or touch-up passes.
Brushes & accessories
HG II Rounded Flat Brush Small, modeling brush
300087224€9.99
The HG II Rounded Flat Brush Small brings a compact rounded flat profile together with very fine PBT resin bristles for precise paint application on model parts and other detailed hobby surfaces. Its small tip helps place colour cleanly along edges, into tight sections and across narrow panels where controlled coverage matters. The bristles have a slightly stiff feel, which supports steady stroke control while keeping the brush responsive in close work. A metal ferrule secures the bristle head to the handle, and the black solvent-resistant grip is shaped for comfortable handling during repeated painting passes. Laser-engraved markings on the handle identify the brush as TAMIYA MODELING BRUSH HG II and show the size in Japanese. At the end of the grip, a small tab helps stop the brush from rolling across the bench and lowers the chance of the bristle tip touching the work surface. This brush suits detail painting on scale models, miniatures and other small-format hobby projects where crisp edges and measured paint pickup are more useful than a wide stroke. The end tab can be removed with side cutters when a smooth handle end is preferred for storage or handling.
Brushes & accessories
HG II Rounded Flat Brush XS, modeling brush, PBT
300087223€9.99
The HG II Rounded Flat Brush XS is built for controlled detail painting, pairing a very fine rounded flat tip with PBT resin bristles that carry paint neatly into small areas. The slightly stiff bristle feel supports crisp placement on narrow edges, tiny parts and close finishing work, where a broader brush can leave too much paint behind. Its handle is made from solvent-resistant material suited to regular bench use with modeling paints and related liquids. A metal ferrule secures the bristle head, and the grip carries laser-engraved HG II series text plus the size marking in Japanese, so the brush can be identified quickly among other tools. At the end of the handle, a small tab helps keep the brush from rolling across the table and lowers the chance of the tip touching the work surface; the tab can be removed with side cutters when a smooth end is preferred. On model kits, miniatures and painted accessories, the XS shape suits careful touch-ups, fine borders and compact color areas that need a steady hand and a clean edge. It also fits finishing sessions where several brush sizes are laid out together and quick size recognition keeps the painting flow focused.
Brushes & accessories
High Finish Flat Brush Nr. 0, hobby paintbrush
300087046€5.79
The High Finish Flat Brush Nr. 0 is a slim hobby paintbrush built for careful, small-scale brushwork. Its narrow flat bristle shape supports crisp paint placement on edges, trim sections and compact surface areas, while the long black handle gives a balanced hold during slow, deliberate strokes. A silver metal ferrule secures the short orange bristles and keeps the working end compact, which helps when paint needs to stay within tight boundaries on model parts or craft details. The flat profile is useful for drawing straight passes across narrow sections, laying down thin coats and refining painted areas after broader coverage has been applied. In a painting setup with jars, palettes and small components on the table, the Nr. 0 size fits the moments that call for accuracy rather than wide coverage. This brush works well alongside detail painting, touch-up steps and finishing passes where a clean edge matters. On scale builds, diorama elements or craft pieces with small painted sections, the narrow head supports measured application and a tidy result. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Flat Brush Nr. 02, hobby paintbrush
300087045€5.79
The High Finish Flat Brush Nr. 02 is a precision hobby paintbrush made for careful work on scale models, miniatures and other small painted parts. Its narrow flat tip supports clean paint placement on edges, trim sections and compact surfaces where a larger brush can leave too much paint at once. The brush combines a long black handle, a silver metal ferrule and a small orange bristle head in a layout built for controlled hand movement. The flat profile helps guide short, even strokes across raised details and straight borders, while the slim head reaches confined areas that need a tidy finish. This makes the brush useful for touch-up work, thin coats and small decorative accents where brush width matters as much as paint quantity. The compact head also helps separate neighbouring painted sections when different colours meet on the same part. On the workbench, the brush suits careful finishing passes on body details, cockpit parts, figures, accessories and miniature scenery. It also fits paint correction tasks after masking removal or detail picking on corners and panel edges, where measured brush contact helps keep surrounding areas clean. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Flat Brush Nr. 2, hobby paintbrush
300087047€6.79
The High Finish Flat Brush Nr. 2 is a slim hobby paintbrush built for controlled, detail-focused painting. Its flat angled bristle tip creates a clear working edge, making it easier to place paint neatly along borders, corners and small surface sections while keeping strokes deliberate and even. The long black handle and silver metal ferrule give the brush a narrow profile that stays easy to guide in close work. That shape supports careful paint application on model parts, craft details and other small areas where a broader brush would cover too much at once. The angled tip also helps when shifting between edging and filling, so one brush can handle crisp lines as well as short, measured passes across compact surfaces. On the workbench, the Nr. 2 size fits painting sessions that call for accuracy rather than broad coverage. It suits touch-ups, trim work and controlled colour placement on smaller sections, where a steady edge and a slim handle help keep the brush tip in view throughout each stroke. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, fine hobby brush
300087049€5.79
The High Finish Pointed Brush, fine is built for detail painting where a very small tip and careful control matter most. Its pointed bristle shape places paint into narrow areas, fine lines and small accents with a more exact touch than a broader brush, making it well suited to miniature finishing, touch-up work and close visual detailing. The long black handle gives the brush a slim, balanced form that sits comfortably in the hand during short, deliberate strokes. A silver metal ferrule connects handle and bristles, helping the fine tip keep its defined shape while working around edges, recesses and other compact painted sections. The clean, minimal layout of the brush also makes it easy to position close to the surface when accuracy matters more than coverage. On a workbench, this brush fits the stages of a paint job that call for restraint rather than speed: picking out trim, refining borders, adding small highlights or correcting tiny areas after a broader coat has dried. It also suits careful craft and hobby tasks where a narrow pointed brush is the right tool for measured paint application. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, hobby brush, ultra fine
300087048€6.19
The High Finish Pointed Brush in ultra fine format is built for detail painting where a clean tip and controlled movement matter most. Its narrow pointed bristle shape supports careful paint placement on small features, whether the task is tracing a fine line, refining a painted edge or adding colour to compact recessed areas. The brush combines a long black handle with a silver metal ferrule and a very slim working tip. That layout keeps the grip clear of the painted surface during close work and helps guide short, deliberate strokes in confined spaces. On scale models, the ultra fine point is suited to cockpit details, trim lines, small fittings and other areas where a broader brush would spread paint too widely. It also fits touch-up work after masking, careful accent painting and other finishing steps that depend on a sharply defined point. Beyond model painting, the brush also suits arts and crafts tasks that call for a narrow tip and measured paint flow. It works well at a desk or hobby bench where detail, correction and neat edge work take priority over fast coverage, giving precise control for small-scale painting sessions. Warning! Not suitable for children under 14 years.
Brushes & accessories
High Finish Pointed Brush, small hobby brush
300087050€5.79
The High Finish Pointed Brush, small is a fine hobby brush built for detail painting where a narrow tip and careful control matter most. Its pointed bristles support accurate paint placement on small parts, panel lines and tight edges, while the slim black handle and silver ferrule give the brush a clean, balanced working form for close hand movements. This small version suits tasks that call for measured paint pickup rather than broad coverage. The long handle helps guide short, deliberate strokes, and the pointed profile makes it easier to reach recessed areas or trace narrow borders with less spill into surrounding sections. The brush shape also supports touch-up work on painted assemblies, figure details and other miniature surfaces where a broader head would cover too much at once. On the workbench, this brush fits neatly into focused finishing steps such as edging, accent painting and refining small visual elements after base colours are in place. It also works well for careful line work on hobby and model projects that need a crisp, controlled tip instead of a wide brush face. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-84 Camouflage Gray, lacquer paint, 10 ml
300082184€3.59
LP-84 Camouflage Gray brings a defined lacquer colour to scale modelling work, with a 10 ml content size that fits neatly into regular bench routines for brush application, detail correction or controlled paint mixing. The HGV designation identifies the shade as a military-style grey suited to projects that call for a restrained, technical finish rather than a bright accent tone. Within a paint rack, LP-84 adds a dedicated grey reference that can be kept separate from broader neutral shades when a build calls for camouflage-led colour planning. The jar size supports measured use on smaller assemblies, selected panels and finishing passes where colour control matters more than bulk volume. As a lacquer paint, it belongs in modelling workflows built around surface preparation, layered colour application and precise tonal matching. The clearly named shade also helps when returning to an unfinished build and matching the same colour again. On the workbench, LP-84 Camouflage Gray fits naturally into armour, transport and utility vehicle painting sessions, as well as detail jobs on accessories and exterior parts. The 10 ml quantity is easy to set alongside other paints during focused finishing work, whether the goal is a single correction, a matched repaint or a planned camouflage scheme. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-85 Medium Air Gray, lacquer paint, 10 ml
300082185€3.59
LP-85 Medium Air Gray is a lacquer paint in a 10 ml bottle, made for model finishing where a controlled gray tone matters on small surfaces, trim sections and technical details. The Medium Air Gray shade lends itself to aircraft-inspired schemes, military subjects and other scale builds that call for a restrained, neutral finish rather than a bright accent color. This paint is identified in the LP range as LP-85 and is supplied as a brush paint. The compact bottle size keeps a dedicated shade close at hand for repeat touch-ups, panel work and color matching across separate assemblies. For hobby benches with several ongoing builds, a single 10 ml bottle is easy to store alongside other finishing supplies while still covering the focused areas where exact shade placement counts most. The paint is classified as flammable and carries hazard labeling for careful handling. On the bench, LP-85 suits detail passes on body sections, interior parts, equipment pieces and other model components where a medium gray finish helps define contrast between neighboring colors. It also works well when a build calls for a consistent gray across multiple sessions, keeping the same tone available for corrections, additions and later refinements. Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush Basic Set, brush set
300087066€6.69
The Modeling Brush Basic Set brings 3 essential brush shapes together for model painting, giving a clear starting point for base coats, smaller sections and fine detail work at the bench. With Flat Brush No. 3, Flat Brush No. 1 and a small pointed brush in one set, the selection covers broad strokes, controlled edge work and precise paint placement on compact parts. The wider flat brush suits larger painted areas where even coverage matters, while the smaller flat brush helps guide colour along tighter sections and defined edges. The pointed brush is shaped for narrow lines, corners and delicate accents that call for a finer tip. Natural wood handles and metal ferrules give the brushes a classic workshop build, and the different brush profiles make it easier to switch between coverage and detail without interrupting the painting process. On scale models, miniature parts and other hobby painting tasks, the set supports steady progress from the first colour layer to the final touch-up. It works well as an entry set for brush painting sessions that need both surface coverage and careful detail control in a compact 3-brush selection. Warning! Not suitable for children under 14 years.
Brushes & accessories
Modeling Brush HF Standard Set, brush set
300087067€15.79
The Modeling Brush HF Standard Set brings together 3 dedicated brushes for model painting, making it easier to move from larger painted areas to crisp finishing work with one coordinated set. The combination of High Finish Flat Brush No.0, High Finish Flat Brush No.2 and High Finish Pointed Brush Ultra Fine supports clean coverage, controlled edges and very fine line work across detailed builds. The 2 flat brushes suit different stroke widths, so base colours, smaller panels and touch-up sections can be handled with a brush that matches the area being painted. The ultra fine pointed brush is shaped for narrow lines, tiny accents and careful work around small molded details. Each brush uses special synthetic hair specified for model painting, a material choice aimed at controlled paint pickup and steady transfer on miniature surfaces. Black handles, silver ferrules and clearly differentiated tip sizes also make the set easy to sort and reach for during longer bench sessions. On a worktable, the set fits naturally into painting stages such as base coating, edge definition and final detail passes on scale subjects. It also works well as a compact core brush selection for builders who want one set ready for regular finishing tasks instead of choosing separate brushes one by one. Warning! Not suitable for children under 14 years.
Airbrush accessories
PC Brush Paint Black, model paint, 23ml bottle
300087228€4.99
PC Brush Paint Black is a water-based model paint supplied in a round 23ml bottle for controlled brush application on selected areas of a build. The formula can be used without thinning, which keeps preparation short and makes it easier to place black coverage exactly where a part, edge or marked section needs it. After drying, the paint becomes water-resistant, giving the finished coat a stable surface for later handling during the build process. The data also states that the dried paint does not dissolve in water or thinner, so cleanup belongs before the coat sets; tools should be washed with water immediately after painting. For layered finishing work, the paint can be painted over with Polycarbonate Spray paints, with the spray applied in several thin coats rather than one heavy pass. This paint suits detail work on model components, small corrections and brush-applied black sections shown in finishing guides or part diagrams. It also fits builds that combine hand-painted accents with later spray stages, where precise placement and a compact 23ml bottle help keep the workbench setup focused and easy to manage. Warning! Not suitable for children under 14 years.
Brushes & accessories
Pointed Brush Medium, modeling brush with wood handle
300087016€2.89
The Pointed Brush medium is built for careful paint application where small details and clean edges matter. Horse-hair bristles form a fine pointed tip that helps place paint with accuracy on narrow sections, trim areas and delicate surfaces, while the wooden handle supports a steady hold during close work. Its slim profile suits hobby benches where controlled strokes count more than broad coverage. The pointed shape helps guide paint into small recesses, along panel lines or onto tiny raised details without flooding surrounding areas. The natural wood handle adds a familiar, balanced feel in the hand, and the strain-reducing design supports longer sessions spent refining miniature parts, model accessories or other detailed painted sections. On a model-making table, this brush fits the moments that call for patience and precision, from touching in small accents to sharpening edges after a base coat has dried. It also works well as a dedicated detail brush kept alongside broader brushes, ready for the final passes that define crisp, finished-looking results. Warning! Not suitable for children under 14 years.
Brushes & accessories
Pointed Brush Small, modeling brush for detail work
300087017€2.89
The Pointed Brush Small is made for detail painting where a broad stroke would overwhelm the surface. Its fine pointed tip helps place paint on narrow edges, recessed lines and small moulded sections, giving model work a cleaner, more controlled finish at the stage where accuracy matters most. The slim white handle keeps the brush easy to guide during short, careful movements. That shape suits tasks such as picking out cockpit controls, tracing trim, refining panel accents and touching in tiny areas after the main colour coat has dried. The pointed profile also helps when paint needs to reach corners or raised details without flooding the surrounding surface. For miniature and scale work, that control can make colour separation and final finishing more precise. On the bench, this brush fits the moments that call for patience rather than coverage: adding fine lines, correcting small sections and working through the last visual details that give a build its finished character. It also suits careful hobby painting on compact parts where a steady tip and measured paint application are more useful than a larger brush head. Warning! Not suitable for children under 14 years.
PS spray paints
PS-XX Dark Blue Polycarbonate Spray Paint 100 ml
300069944€12.49
PS-XX Dark Blue is a 100 ml spray paint for polycarbonate bodies, made for model shell finishing where the coating needs to match the body material. The dark blue shade gives RC bodyshell projects a strong, even color base that reads clearly on curved fenders, roof sections and side panels. As part of the PS paint range, this spray is intended for use on polycarbonate shells rather than general household surfaces. That material focus matters during body preparation, because RC shells flex and carry molded contours, window lines and wheel arch shapes that need a coating suited to the substrate. The 100 ml content gives useful capacity for complete coverage on many shell layouts and also supports follow-up work such as reinforcing color depth in selected areas. In multi-step paint schemes, Dark Blue can serve as the main body color or as one section within a masked design. On the bench, the can fits naturally into body finishing work for touring cars, buggies or other RC shell projects that use polycarbonate. It suits fresh builds, replacement bodyshells and repaint work where a defined dark blue tone is needed for a clean, model-focused finish.
Brushes and accessories
Sanding Cloth #600, model hobby abrasive sheet
300087231€4.69
This #600 sanding cloth brings a controlled abrasive surface to model hobby work, combining a soft backing with a grit suited to material removal, surface correction and early-stage finishing. The 170 x 130 mm format sits flat on benches, wraps around sanding blocks and follows curved sections more easily than a rigid sheet when bodywork, filler or primer needs even attention. The cloth can be used for both dry and wet sanding, which supports different workshop routines across paint preparation and surface cleanup. Water use helps carry sanding residue away from the contact area, while dry use suits quick checks and local corrections between steps. The abrasive range is part of a 5-grit series that also includes #1000, #1500, #2000 and #3000, with the number after # indicating the roughness grade. This sheet is supplied as 1 piece. On model bodies, parts and other hobby surfaces, the soft cloth structure stays easier to place over edges, corners and gentle curves. Limited fold lines help avoid pronounced scratch marks when the sheet is bent during use, making it a useful choice for repeated sanding passes in detailed finishing work. Warning! Not suitable for children under 14 years.
Diorama texture paints
TextureClaySoil Brown, diorama clay, 150g
300087221€14.49
TextureClaySoil Brown brings shaped ground relief to diorama bases with a pre-colored brown clay that is made for soil effects rather than a flat painted surface. The 150 g pack suits scenes across a wide 1/6 to 1/48 scale range, where uneven earth, ruts and worked terrain help a vehicle or figure sit more naturally in the setting. The water-based formula limits odor and helps limit dirt on hands during longer shaping sessions. Numerous colored particles in the clay support a more natural soil look, and the surface can be worked directly after kneading the bag contents. A thin layer of bond is applied to a rigid display base first, then the clay is spread over it and textured with stiff brushes to form irregular ground. Tracks and tires can be pressed into the surface to depict traces, and Brown can be mixed with Dark Earth to shift the tone across the base. The clay is not adhesive like putty, so cement or wood glue is required separately. Solvent cement and instant cement are not suitable. Drying takes about 2 to 7 days. On military scenes, vehicle displays or figure settings, the clay helps turn a plain base into terrain with visible depth and contact marks. It also suits compact groundwork studies where brush texture, wheel impressions and mixed earth tones define the final scene. Warning! Not suitable for children under 14 years.
Diorama texture paints
TextureClaySoil DarkEarth, diorama clay, 150 g
300087222€14.49
TextureClaySoil DarkEarth is a 150 g diorama clay for building realistic ground texture on scenic bases and model displays. The dark earth colour and the numerous coloured resin particles work together to give the surface a soil-like appearance, while the clay body can be shaped into bumps, shallow depressions and broken terrain that look less flat than a plain painted base. This modelling material is aimed at groundwork rather than fine structural parts. Spread across a base, it helps establish the landform under vehicles, figures or military scenes before further detailing is added. The mixed particle content creates visible variation through the surface, which helps earth sections avoid a uniform finish. Because the compound is already coloured in a dark earth tone, the base starts with a terrain-appropriate look even before weathering powders, grass or other scenic materials are applied. On a tank display, the clay can define churned soil around the running gear area and shape the rise and fall of the ground beneath the hull. On a small vignette or larger diorama, it supports rough paths, embankments and irregular field surfaces that give the scene a more convincing setting. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Sponge Brush Fine, model tool
300087084€6.19
The Weathering Sponge Brush Fine brings a precise applicator shape to close, detailed finishing on scale models. Its fine white sponge tip reaches small edges, narrow sections and tight surface areas where broad tools can leave too much material, making it suited to subtle weathering passes and controlled blending. A silver metal ferrule secures the sponge tip to a tapered black handle, and the longer handle gives a balanced hold for short dabbing motions and careful directional strokes. The brush is specially designed for use with Weathering Master material, so pigment can be picked up, placed and softened in small amounts rather than spread in a heavy patch. This makes it useful for building worn highlights, dusty corners, shaded panel lines and light grime effects step by step. On military subjects, road cars, motorcycles or rail models, the fine tip helps place weathering exactly where surface detail needs extra depth. It also suits touch-up work after the main paint stage, when small marks, edge wear and blended transitions can change the overall finish of a model without covering the underlying detail. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Sponge Brush Medium, hobby tool
300087083€6.19
The Weathering Sponge Brush Medium is a hobby finishing tool made for detailed weathering work on scale models and similar surfaces. Its oval sponge tip applies Weathering Master material with a soft, controlled touch, so shading, dust effects and worn edges can be built up in small steps instead of landing as a hard brush mark. A resilient sponge head changes how weathering material meets the surface. Dabbing creates broken, natural-looking texture, while light sweeping or tapping helps blend pigment into corners, raised detail and recessed lines. The tapered black handle and silver ferrule keep the brush balanced in the hand, and the printed Medium designation makes it easy to distinguish from other sizes on the workbench. This version sits between pinpoint application and wider coverage, which helps when a finish needs both control and visible spread. On vehicle bodies, aircraft panels, armour sections or diorama parts, the brush supports rust tones, road grime, soot effects and subtle fading with a measured application pattern. It suits finishing sessions where repeated passes matter, whether adding a faint dusty edge around vents or building heavier deposits around seams and textured surfaces. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-1 Flat Black, acrylic paint, 23 ml jar
300081301€5.491 l = €238.70
XF-1 Flat Black is an acrylic paint for scale model finishing, supplied in a 23 ml jar and suited to the deep matte areas that give a build visual weight. The flat black tone fits naturally on chassis sections, cockpit parts, mechanical details and shadowed recesses where a reflective surface would break the scale effect. The acrylic formula supports careful brushwork on small parts and controlled coverage across larger painted sections. On military subjects it can define tools, tracks and interior sections; on cars it suits undersides, trim areas and engine bay details; on aircraft it works well for cockpit elements and selected panel accents. The 23 ml jar size keeps a frequently used workshop colour close at hand for repeat touch-ups, layered weathering steps or fresh contrast on newly added parts. At the bench, Flat Black often becomes one of the first colours opened and one of the last used for final corrections. It suits focused detailing sessions as well as broader finishing work, giving model builders a reliable matte black shade for projects that call for depth, separation and crisp visual definition.
XY acrylic colours
XF-2 Flat White, acrylic paint, 23 ml jar
300081302€5.491 l = €238.70
XF-2 Flat White is an acrylic paint for model work, supplied in a 23 ml jar and formulated for brush application. The matte white color gives scale builds a clean, non-gloss finish that suits everything from small cockpit details to larger painted sections, with the jar size keeping enough paint on hand for repeat use across a project. The paint is identified as XF-2 Flat White in the Tamiya acrylic range, making it easy to match with build notes, color plans and established hobby paint references. The safety data names it as a liquid paint with a flash point of 33°C and a density of 1.2 g/mL at 23°C. The listed appearance is white with an alcohol odor. For handling, use in well-ventilated areas and keep away from heat, sparks and open flames. Protective gloves and eye protection are stated in the safety information. On the bench, this color fits careful brushwork on model bodies, interior sections, figures, scenery details and repair spots where an even matte white is needed. The 23 ml format also suits keeping a standard white ready between sessions for touch-ups, layered coverage and consistent finishing across multiple builds.
XY acrylic colours
X-11 Chrome Silver Gloss, acrylic paint, 10 ml
300081511€3.591 l = €359.00
X-11 Chrome Silver Gloss brings a bright metallic finish to plastic model building, with a brush paint format that suits controlled work on small parts and defined sections. The 10 ml jar size keeps the paint easy to handle during detail painting, whether the focus is trim, cockpit elements or mechanical accents that need a reflective silver tone. This acrylic paint is identified as X-11 and described as Chrome Silver Gloss, giving model builders a specific shade for metallic highlights rather than a general silver. The paint is supplied as a liquid brush colour, which makes it suitable for placing colour into recesses, along edges and across moulded detail where precision matters. The safety data identifies the mixture as flammable and states that it should be used in well-ventilated areas. The same documentation describes a density of 1 g/ml at 23°C and a flash point of 31-33°C. On the bench, this colour suits small finishing steps that change the look of a build, such as picking out grilles, trim strips or interior parts with a brighter metallic contrast. It also works for touch-up tasks when a model needs a consistent chrome silver gloss across separate painted sections.
PS spray colours
PS-5 Black, polycarbonate spray paint, 100 ml
300086005€10.991 l = €109.90
PS-5 Black brings a dedicated spray format to polycarbonate model finishing, combining a deep black colour with the quick, even coverage of an aerosol can. The 100 ml content gives a usable amount for coating bodyshell sections, laying down backing coats or refining darker design areas on compatible model parts. This paint is identified for polycarbonate, which matters when the surface calls for a formula intended for that material rather than a general craft coating. The spray can format helps cover curved panels, roof sections and side areas with a continuous pass instead of brush marks. Black also plays several concrete roles in model finishing, from solid single-colour bodies to contrast sections, window borders and visual depth behind brighter outer colours. The compact can size stores easily with other workshop supplies while keeping the colour reference simple through the PS-5 designation. On the bench, PS-5 Black fits paint preparation for RC bodyshell projects, replacement shells and detail-led custom schemes. It also suits repeat finishing sessions where the same black tone is needed across separate polycarbonate parts or later repaint work. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-18 Semi Gloss Black, acrylic paint, 10 ml
300081518€3.591 l = €359.00
X-18 Semi Gloss Black is an acrylic brush paint for plastic model building, supplied in a 10 ml jar for controlled application on smaller parts and focused paint sessions. The semi gloss finish gives black surfaces a measured sheen that reads cleaner than flat black and less reflective than full gloss, which helps shaped details stay visible under light. This paint is identified as X-18 and described as black with a semi gloss character, making it useful for trim, cockpit sections, mechanical parts and other areas where a solid dark tone needs a subtle surface highlight. The liquid formula is supplied as a brush paint rather than a spray, which supports careful work around edges, recesses and molded detail. On mixed-color builds, the black tone also works as a visual separator between neighboring parts and markings. The compact 10 ml size keeps the jar easy to store alongside other modeling colors and practical for projects that need targeted coverage rather than large-area coating. At the workbench, the jar format suits short painting steps between assembly stages, weathering passes or final detail corrections. It fits builders who paint figures, vehicle interiors, accessories or exposed components and need a dependable black with a restrained sheen for repeated finishing tasks.
XY acrylic colours
X-20A Acrylic Thinner 250ml, paint thinner
300081040€12.791 l = €51.16
X-20A Acrylic Thinner 250 ml is a dedicated thinner for Tamiya acrylic and polycarbonate colors, giving model painting work a controlled way to adjust paint behavior before it reaches the brush or airbrush. The bottle format keeps the liquid ready at the bench for measured mixing during body finishing, detail painting or touch-up work. The formula is identified in the safety data as a solvent in water, with propan-1-ol listed among the components. The bottle carries a ribbed screw cap for secure closure between sessions, and the 250 ml fill volume suits repeated use across multiple painting stages. Label information also states Conforms to ASTM D4236. For handling, the container is marked as flammable and specifies use in well-ventilated areas, with eye protection required. The liquid is colorless and has a solvent odor. On a model bench, X-20A can be kept alongside paint jars for mixing smaller amounts for fine lines or larger batches for broader coverage, depending on the painting task at hand. The 250 ml size also makes it a useful refill option when paint preparation and cleanup are part of regular building and finishing routines. Warning! Not suitable for children under 14 years.
Primers
Fine Surface Primer L, primer spray, white 180 ml
300087044€14.791 l = €82.17
Fine Surface Primer L is a white primer spray in a 180 ml aerosol can, made for preparing model surfaces before painting. The white tone creates a bright undercoat that supports clean colour development on later layers, while the spray format helps reach broad panels and shaped parts with the same coating step. The can is specified for plastic, metal and wood, which makes it suitable for mixed-material model work without changing to a different primer type. The formulation is described as a primer or pre-paint coating, so its role is surface preparation rather than the final colour finish. On body panels, housings or scratch-built sections, the white base can help lighter paint shades keep their intended tone instead of being dulled by a darker substrate. The aerosol format also suits parts with edges, recesses and angled surfaces that are awkward to cover evenly with a brush. According to the supplied safety data, the contents are binders, pigments and solvents in a pressurised can. This spray fits naturally into model painting sessions where separate parts are primed before the colour coat, and it also suits touch-up work on metal or wood components that need the same white base. Use is intended outdoors or in well-ventilated areas, as stated in the safety documentation. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-56 Flat Metallic Grey, acrylic paint, 10 ml
300081756€3.591 l = €359.00
XF-56 Flat Metallic Grey is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps the quantity focused on detail painting, touch-ups and smaller painted sections. The flat metallic tone combines a subdued grey base with a restrained metal effect, giving mechanical parts, body details and equipment surfaces a more technical look than a plain solid grey. Within a paint lineup, a shade like Flat Metallic Grey is useful where a bright silver would appear too reflective and a non-metallic grey would look too flat. The acrylic format supports controlled application on narrow edges, recessed areas and picked-out components. On military subjects, vehicle details and machinery sections, the colour can help separate metal parts visually from surrounding panels. The 10 ml size also suits bench storage, colour rotation and project-specific paint selection without committing to a larger volume. On the workbench, XF-56 can be used for careful brushwork on vents, housings, brackets or trim where a muted metallic note adds depth. It also fits finishing sessions that focus on selective accents, repairs or colour correction across an existing model scheme.
XY acrylic colours
X-27 Clear Red Gloss, acrylic paint, 10 ml
300081527€3.591 l = €359.00
X-27 Clear Red Gloss brings transparent red colour to plastic model building, adding a glossy tinted finish that leaves moulded detail and surface structure visible beneath the coat. The acrylic paint format suits careful brush application on small sections where a solid opaque layer would hide the part's shape. The 10 ml content works well for repeated detail sessions on lenses, light units and other clear accents across multiple builds. As a clear gloss shade, it is suited to parts that need colour while still showing the form underneath, rather than covering them with a flat block of pigment. The paint is supplied in liquid form and is identified as X-27 within the X-Acrylic range. The safety data names it as a glossy special acrylic resin paint for plastic model building. On the bench, this shade fits focused finishing work such as colouring rear light sections, transparent inserts or small decorative areas that need a red gloss effect. It can also be kept alongside other modelling paints for touch-up work when a build calls for a transparent colour layer instead of an opaque coat.
XY acrylic colours
X-26 Clear Orange Gloss, acrylic paint, 10 ml
300081526€3.591 l = €359.00
X-26 Clear Orange Gloss brings a transparent orange tone to plastic model building, combining colour tinting with a gloss surface that works well on small visual accents and clear effect areas. In a 10 ml jar, the paint quantity stays practical for bench use, whether the task is refining light lenses, adding warm transparent shading or adjusting selected body details. This X-Acrylic paint is identified in the safety data as a glossy brush paint for plastic model building and is supplied as a liquid mixture of binders, pigments and solvents. The clear orange character allows underlying moulded detail to remain visible instead of covering it with an opaque coat. A density of 1.0 g/ml is stated in the data, and the solvent content is listed at 50 - 60%, pointing to a fluid paint structure suited to thin, even application. The alcohol-like odour and flammable classification also make clear that careful handling and good ventilation belong to workshop use. On the modelling table, the 10 ml format fits short painting sessions, correction work and colour matching across separate parts without committing to a large container. It suits builders working on vehicle lights, transparent inserts and other small sections where a glossy tinted finish helps the painted area stand out with clean, focused colour.
XY acrylic colours
XF-16 Flat Aluminium, acrylic paint, 10 ml
300081716€3.591 l = €359.00
XF-16 Flat Aluminium is an acrylic paint for scale modelling work, supplied in a 10 ml jar for controlled use on smaller sections and precise finishing tasks. The flat metallic tone suits areas that call for an aluminium appearance with a subdued surface, such as structural details, trim sections or mechanical elements that should avoid a glossy look. The acrylic formula makes this colour a practical choice when a build calls for careful brushwork, edge definition or touch-up passes after main painting is complete. A 10 ml jar also helps keep the shade manageable on the bench, with enough paint for repeated detail sessions while staying easy to store alongside other modelling colours. The Flat Aluminium tone can be used to separate metal parts visually from surrounding body colours, interior sections or darker assemblies, giving small components clearer contrast on the finished model. On military subjects, road cars, motorcycles or workshop accessories, this shade fits naturally into painting sessions where bolts, housings, panels or exposed metal sections need a restrained metallic character. It also works well for revisiting earlier builds, correcting small marks or adding final accents once the main colour scheme is already in place.
XY acrylic colours
X-1 Black Gloss, acrylic paint, 10 ml jar
300081501€3.591 l = €359.00
X-1 Black Gloss brings a dense black tone and a reflective finish to plastic model building, with a 10 ml jar size that suits careful brush work on smaller sections and defined details. The X-Acrylic resin formula is intended for scale modelling tasks where trim, interior parts or selected exterior areas need a clean gloss surface rather than a flat look. The black gloss shade can be used to pick out contrast on cockpit elements, frame sections and other painted components where a darker finish helps visual separation. In the safety data provided for this paint range, the mixture is described as liquid, with pigments, binders and solvents, and a density of 1.0 g/ml at 23 °C. The same document identifies a flash point of 31 to 33 °C and lists the paint as flammable, so handling belongs in well-ventilated conditions and away from heat sources. For storage and workshop planning, the jar format keeps a small measured quantity ready for repeat sessions on ongoing model projects. On the bench, this colour fits jobs such as edging, retouching and finishing selected parts after main assembly or base coating. It also works where a gloss black layer is needed before further detailing on plastic model components. Paint is supplied in 1 jar with 10 ml content.
TS spray colours
TS-13 Clear Gloss 100 ml, paint spray, clear coat
300085013€10.491 l = €104.90
TS-13 Clear Gloss is a 100 ml clear coat spray for model finishing, designed to add a transparent gloss layer over painted surfaces while leaving the underlying colour visible. The aerosol format supports fast, even coverage across larger sections such as bodyshells, body panels and other exterior parts where a uniform sheen matters. The formula is identified in the supplied data as a special acrylic resin spray, and the can is marked for plastics, making it suitable for plastic model work. Applied in light coats, the clear layer helps bring separate painted sections into a more consistent overall finish and can visually unify decals and colour areas under one glossy surface. The spray can format also suits broad curves and recessed shapes that are slower to cover with a brush. REACH declaration data states that this version does not contain substances of very high concern above 0.1% according to the ECHA Candidate List. For model builders working on car bodies, fairings or other display surfaces, TS-13 Clear Gloss adds the final reflective layer that completes the painted look. The can should be shaken vigorously before use and sprayed in a well-ventilated area, with attention to the hazard guidance shown for flammability and irritation. Warning! Not suitable for children under 14 years.
PS spray colours
PS-1 White, polycarbonate spray paint, 100 ml
300086001€10.991 l = €109.90
PS-1 White brings a dedicated spray paint option to polycarbonate model work, with a 100 ml aerosol format that suits clear RC bodyshells and other compatible parts. The white tone gives shells a crisp, high-contrast finish that stands out on track layouts, display shelves and custom builds alike. The formula is specified for polycarbonate, which matters when painting flexible model bodies that need the right type of coating. The aerosol can lays paint over broad roof sections, curved fenders and narrow contour lines with a continuous spray pattern that is difficult to match with a brush. White also works across several finishing approaches: as a full body colour, as a bright backing coat behind other colours, or as a clean base under decals and racing graphics. In model projects with layered paint plans, that flexibility in colour use helps keep the finish clear and readable. This spray paint fits naturally into RC body preparation, repaint work and fresh custom schemes. It can be used when refreshing a well-run bodyshell, finishing a newly cut shell or setting up a motorsport-inspired livery with strong contrast and clear panel definition. Paints are required separately. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-10 Gun Metall Gloss, acrylic paint, 10 ml
300081510€3.591 l = €359.00
X-10 Gun Metall Gloss brings a dark metallic tone to scale model finishing, with a 10 ml jar size that suits detail painting, touch-ups and smaller painted sections. The acrylic brush paint format gives controlled application on parts where a metallic surface needs definition rather than a broad overall coat. The Gun Metall shade works well on mechanical-looking areas, trim pieces and surface details that benefit from a darker reflective finish. As a liquid paint mixture with pigments and binders, it is intended for model building use and supports careful colour placement on selected sections of a build. The compact jar size stores easily alongside other workshop colours and keeps a focused amount ready for repeated detail sessions. The gloss finish adds a cleaner light-catching effect than a flat coat, which helps metallic accents stand apart from surrounding colours. On a workbench, the 10 ml format fits neatly into paint racks, tray setups or small hobby spaces where quick access matters during painting stages. It suits builders refining panel sections, equipment details or small exterior parts, especially when a darker metallic note completes the final look of the model.
Primers
Fine Surface Primer L, spray primer, light gray
300087064€14.791 l = €82.17
Fine Surface Primer L in light gray prepares model parts for painting with a smooth, fine undercoat that suits detailed work and larger assemblies alike. The aerosol can delivers 180 ml and is identified for use on metal, wood and model plastics, making it a practical choice when one build combines several materials. The light gray shade gives a neutral base before colour coats and helps surface work stand out during preparation. Sanded seams, filled areas and small imperfections are easier to spot on a uniform primer layer than on bare mixed materials. As a primer and pre-paint coat, it supports cleaner colour application on body panels, structural parts and scratch-built sections where an untreated surface can vary from piece to piece. The spray format also helps reach angled edges, recessed details and irregular shapes with a more continuous coat than hand application on the same geometry. On the bench, the can fits the usual sequence of surface prep, priming and painting for scale models and hobby builds. It can be used when separate metal fittings, wooden sections and plastic components need the same visual starting point before the finish coat goes on. Warning! Not suitable for children under 14 years.
TS spray colours
TS-26 White Gloss, spray paint, 100 ml aerosol
300085026€10.491 l = €104.90
TS-26 White Gloss brings a bright solid tone and a reflective finish to model painting, with a 100 ml aerosol format that suits broad, even coverage on plastic parts. The spray can layout supports fast colour application across body sections and shaped components where a brush can leave visible stroke patterns. The can is identified as a special acrylic resin spray within the TS paint range, giving model makers a dedicated finishing option for hobby work. Visible use guidance on the can recommends shaking vigorously and applying light coats from 25 to 30 cm, a method that helps the paint build up in controlled layers rather than flooding fine contours. The gloss white shade works well where a clean, high-contrast surface is needed for racing liveries, civil vehicle finishes or custom colour schemes. The 100 ml fill also gives enough material for repeated passes across larger shells, wings or body panels in one painting session. On the bench, the aerosol format fits projects that move from primed parts to final colour with minimal interruption. It can be used when separate model sections need a uniform white coat before decals, trim painting or display finishing, keeping the overall look crisp and consistent across matched parts. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-11 Chrome Silver Gloss, acrylic paint, 23 ml
300081011€5.491 l = €238.70
X-11 Chrome Silver Gloss brings a bright metallic silver tone to model surfaces with a gloss finish that catches light across trim, panels and small accent parts. The 23 ml jar suits repeated brush-paint work on plastic model building projects where a reflective chrome effect is needed on selected details. This acrylic brush paint is identified as a liquid mixture of pigments, binders and solvents. The safety data names it for plastic model building and lists a density of 1 g/mL at 23°C, with a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The colour is silver and the odour is alcohol. These material characteristics matter during careful bench work, where thin edges, raised moulded parts and small surface sections call for controlled paint pickup and steady coverage rather than broad spray application. Used on model trim, mechanical accents or highlighted body sections, the gloss metallic finish helps separate fine visual details from surrounding colours. For handling, the safety data states that the paint is flammable and should be used in well-ventilated areas, with vapour and aerosol inhalation avoided and eye protection worn.
XY acrylic colours
X-7 Red Gloss Acrylic Paint, 10 ml hobby color
300081507€3.591 l = €359.00
X-7 Red Gloss Acrylic Paint brings a vivid red tone and a reflective gloss finish to plastic model building, giving body panels, trim pieces and small accents a clean, defined colour presence. The 10 ml jar suits bench setups where controlled amounts, repeat access and careful brush work matter during painting sessions. This X-Acrylic paint is identified as X-7 Red Gloss and is intended for plastic model building. The formula is a liquid mixture of binder, pigments and solvents, with a density of 1.0 g/ml at 23 °C. In use, the gloss surface helps light catch edges, raised details and shaped contours, so colour placement reads clearly on finished assemblies. The small jar format also fits neatly into organised paint racks, tool drawers or compact hobby cases where individual colours need to stay easy to sort and quick to reach. On the workbench, the 10 ml size suits detail passes on mirrors, spoilers, cockpit parts or highlighted body sections without opening a larger container than the task requires. Between main colour coats, correction work and final finishing touches, the red gloss shade gives model builders a focused paint option for precise, repeatable colour work on plastic parts.
TS spray colours
TS-14 Black Gloss, spray paint, 100 ml
300085014€10.491 l = €104.90
TS-14 Black Gloss is a 100 ml spray paint for model finishing, combining a deep black tone with a gloss surface that suits body shells, exterior panels and other visible parts. The aerosol format covers wider areas quickly, making it useful when a model needs an even sprayed coat rather than brush marks. This TS paint is described as a special acrylic resin spray and is presented for plastic model use. Light coats can be built up across curved sections, edges and recessed areas, which helps keep the finish visually consistent on shaped parts. The can label identifies it as TS-14 and marks the net volume as 100 ml. The safety data for this aerosol classifies it as an extremely flammable aerosol under pressure, with storage and handling precautions that belong to workshop use. The same documentation also identifies the mixture as containing binders, pigments and solvents in a pressurised can. On the bench, this kind of spray paint fits body preparation, colour coating and final exterior finishing on scale builds where a gloss black surface is part of the look. It can be used when separate parts need the same colour match across the model, or when larger plastic sections call for a sprayed finish with steady visual coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-29 Semi Gloss Black, spray paint, 100 ml
300085029€10.491 l = €104.90
TS-29 Semi Gloss Black brings a controlled black finish to model work with a 100 ml aerosol can and a semi gloss surface effect that sits between flat and full gloss. The special acrylic resin formula is made for plastics, making it a practical choice for colouring body parts, panels and other compatible model sections where an even sprayed coat matters. The aerosol format changes how the paint reaches the surface: instead of loading a brush, the colour is sprayed across wider areas in a continuous mist, which helps keep the finish more uniform on broad panels and curved shapes. Semi Gloss Black suits builds that need a darker tone with a slight sheen rather than a fully reflective look. The can is part of the TS paint range, a line used for model finishing where colour accuracy and surface appearance shape the final look of the build. The 100 ml net volume also gives useful capacity for larger shells or several smaller parts within one project. On the bench, TS-29 fits body painting, panel work and colour matching across separate components in the same build. It also works well when a project calls for black trim, darker accent sections or a consistent repaint of replacement parts on compatible plastic models. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-1 Flat Black, acrylic paint, 10 ml jar
300081701€3.591 l = €359.00
XF-1 Flat Black is an acrylic paint for scale modelling work, supplied in a 10 ml jar that keeps a frequently used colour close at hand for repeat sessions at the bench. The flat black tone gives painted areas a non-reflective finish, which suits parts that need a muted, technical look rather than a glossy surface. Within a model build, black often carries visual structure, and this shade can be used where contrast, shadow definition or dark base coverage is needed. The 10 ml size is easy to store alongside other workshop colours and suits focused jobs such as cockpit sections, chassis details, trim areas or small accessories. As an acrylic paint, XF-1 fits modelling routines that rely on measured application and controlled coverage on selected sections rather than broad household painting tasks. On military subjects, automotive replicas, aircraft kits or figures, flat black helps pick out recesses and mechanical forms with a restrained finish. Kept on the bench for regular touch-up work or used as a dedicated detail colour during a full build, XF-1 supports neat, deliberate painting across many scale modelling contexts.
XY acrylic colours
XF-63 Flat German Grey, acrylic paint, 23 ml
300081363€5.491 l = €238.70
XF-63 Flat German Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-63 colour code. The flat grey tone gives scale surfaces a muted, non-gloss look that suits military subjects, equipment details and technical builds where a matt finish is part of the visual character. The jar format keeps the paint easy to store between sessions and simple to bring back into use for follow-up work on the same build. On smaller components, the controlled quantity supports careful coverage on edges, panels and detail areas where colour placement needs to stay precise. The clearly stated shade name also helps when a build calls for the same tone across separate stages, whether the work focuses on base coating, detail accents or later corrections. On the bench, XF-63 Flat German Grey fits naturally into painting sequences that move between larger body sections and finer parts. It also suits projects that need a restrained grey for machinery, accessories or weathered finishes, keeping the overall look even across repeated applications.
Lacquer colours
Lacquer Thinner 250ml, model paint thinner
300087077€12.591 l = €50.36
Lacquer Thinner 250ml supports model painting with one bottle for paint preparation, spray mixing and tool cleanup. The 250 ml format suits regular bench use, whether lacquer paints need a smoother brushing consistency or an airbrush mix needs a more controlled flow across small parts and larger body sections. The label states a 2:1 mixing ratio for airbrush application, giving a concrete reference for preparing lacquer paints and liquid surface primer for spray work. The thinner is also intended for Tamiya putty, which helps when surface filling and finishing need a matching solvent on the workbench. Brushes and painting tools can be cleaned of oil and paint residue with the same bottle, so colour changes and end-of-session cleanup stay within the same workflow. For heavier soiling, the printed instructions note a longer soak before rinsing with clear water. On a model bench, that means one thinner can move between mixing cup, airbrush routine and brush care without switching materials mid-session. The screw-cap bottle stores compactly beside paints, primer and putty, ready for detail painting, surface preparation and cleanup after the final coat.
XY acrylic colours
XF-15 Flat Flesh, acrylic paint, 10 ml
300081715€3.591 l = €359.00
XF-15 Flat Flesh is an acrylic paint in a 10 ml format, sized for focused colour work on scale models and painted details. The flat finish gives the shade a muted surface look that suits areas where a non-gloss appearance is needed, whether on figures, interior sections or small scene elements. The XF designation identifies this colour within the Tamiya paint range, which helps keep shade selection consistent across multi-step painting work. The Flat Flesh tone can be used where skin-colour accents, character parts or subtle warm highlights need a controlled matte result. The compact jar size also fits neatly into a bench setup with other modelling supplies, keeping frequently used colours close at hand during painting sessions. On a worktable, this paint suits careful brush-led application for edges, recessed sections and other small zones that benefit from measured colour placement. It also works well for touch-up tasks between larger painting stages, when a specific tone is needed without opening a bigger paint volume.
TS spray colours
TS-17 Aluminum Silver Gloss, spray paint, 100 ml
300085017€10.491 l = €104.90
TS-17 Aluminum Silver Gloss is a 100 ml spray paint for model finishing, built to cover larger surfaces quickly with a bright metallic silver tone and a gloss sheen. The aerosol format helps lay colour across body shells, fairings and shaped parts in smooth passes, creating an even look on broad panels and tighter contours alike. This TS colour belongs to the special acrylic resin spray range and is intended for plastic model work. The aluminum silver shade suits full-body colour coats as well as accent areas where a reflective metal effect is needed. On car bodies, aircraft sections or mechanical details, the gloss finish gives edges and panel shapes stronger definition under light. The spray format also helps reach vents, recesses and curved mouldings that are slower to cover with a brush. For hobby benches that handle multiple subassemblies, the 100 ml can offers enough paint for repeated finishing sessions across several parts. Used for scale models, custom bodies or detail refresh work, TS-17 fits projects that call for a clean metallic surface rather than a flat coat. Light, even passes support controlled coverage on spoilers, cowls, fuselage sections and armour panels. This makes the shade a practical choice when a build needs a crisp silver finish with the speed and reach of aerosol application. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-18 Semi Gloss Black, acrylic paint, 23 ml
300081018€5.491 l = €238.70
X-18 Semi Gloss Black brings a controlled black tone and a measured sheen to plastic model building work. The X-Acrylic formula is supplied in a 23 ml jar, giving model makers a compact paint size that suits detail painting, small subassemblies and repeat bench use. The semi gloss finish sits between flat and high gloss, which helps black parts keep visible shape and edge definition instead of disappearing into a fully matte or highly reflective surface. That makes X-18 useful on trim lines, cockpit sections, chassis details and other areas where contrast matters. The colour designation stays consistent within the X-Acrylic range, which supports touch-ups and follow-on work across longer builds. The paint is identified in the safety data as a liquid paint for brush application and has a density of 1 g/mL at 23 °C. On the workbench, a 23 ml jar is easy to keep within reach for recurring black details across cars, aircraft, military subjects and display pieces. For careful finishing sessions, the semi gloss character suits parts that need a darker technical look while still catching light on edges and contours.
XY acrylic colours
XF-16 Flat Aluminium, acrylic paint, 23 ml
300081316€5.491 l = €238.70
XF-16 Flat Aluminium is an acrylic paint for model building work that combines a metallic aluminium tone with a flat finish, giving painted parts a subdued metal look rather than a reflective gloss. The 23 ml jar size keeps the paint compact on the workbench while providing enough material for repeated detail work across multiple sections. The Flat Aluminium shade suits areas where a scaled metal appearance matters, such as panel sections, mechanical details or trim on vehicles, aircraft and other hobby builds. The acrylic formulation supports careful brush application on smaller parts and edges, where controlled placement is often more important than broad coverage. The flat character of XF-16 helps create a worn, technical or service-finish look on components that should read as metal without a polished shine. On a build table, the 23 ml jar fits naturally into regular painting sessions for touch-ups, accent work and consistent colour matching across separate assemblies. It also works well when a project needs the same aluminium tone repeated on multiple details, helping keep the finish visually coherent from one section to the next.
XY acrylic colours
XF-7 Flat Red, acrylic paint, 10 ml jar
300081707€3.591 l = €359.00
XF-7 Flat Red is an acrylic paint for model building work, supplied in a 10 ml jar for controlled use on smaller painting tasks. The flat red colour gives scale subjects a matte-looking finish that suits body details, interior sections, accessories and scenic elements where a muted surface is preferred over shine. The compact jar format keeps the paint amount focused on hobby use rather than large-area coverage, which helps when colour is needed for trim, markings or careful retouching. As part of the XF acrylic range, XF-7 fits neatly into colour-coded workshop storage and supports repeatable paint selection when a build calls for the same shade again. The paint format also suits measured loading onto a palette or direct brush work in short painting sessions at the bench. XF-7 Flat Red works well in build stages where smaller parts need a defined colour accent or where a flat finish helps separate one painted area from another. On military subjects, civilian vehicles, figures or display scenery, the 10 ml size is easy to keep close at hand for detail passes, corrections and finishing steps that call for a strong red tone.
XY acrylic colours
XF-85 Flat Rubber black, acrylic paint, 10 ml
300081785€3.791 l = €379.00
XF-85 Flat Rubber black is an acrylic paint for model finishing, supplied in a 10 ml jar for compact storage and measured use at the workbench. The flat colour effect suits parts that call for a subdued dark tone, giving painted sections a more restrained surface appearance than a glossy black. This shade is named Flat Rubber black, which makes it a focused choice for components such as tyres, trim accents or other dark areas where a softer visual finish is needed. The acrylic formulation supports careful application in small sections, especially where edges, narrow contours or isolated details need clean colour placement. The 10 ml content also helps when a project calls for a dedicated tone rather than mixing a larger batch. Within a paint rack, XF-85 is easy to identify as a distinct colour reference for repeat use on future builds. On military models, road cars, motorcycles or display pieces, this paint can be used to separate darker detail zones from surrounding body colours and metallic parts. It also fits touch-up work, partial repainting and finishing passes where a flat dark accent completes the overall look of the model.
XY acrylic colours
XF-86 Flat Clear, acrylic paint, 10 ml
300081786€3.791 l = €379.00
XF-86 Flat Clear is an acrylic paint for model finishing, supplied in a 10 ml jar and intended for adding a flat clear coat to painted surfaces. The matte effect helps tone down gloss, so colour schemes, panel lines and small moulded details remain the visual focus when a build reaches its final finishing stage. Used as a clear layer rather than a colour coat, XF-86 supports a more uniform surface across separate painted areas and can help bring decals and markings into the overall finish. The 10 ml size suits bench storage alongside other modelling paints and gives a manageable amount for touch-ups, selected sections or full clear coverage on smaller scale subjects. As an acrylic paint, it fits naturally into hobby paint collections built around detail work, surface refinement and staged finishing. On military subjects, road cars, motorcycles or display pieces, a flat clear coat can change how the completed surface reads under room light by softening reflections across body panels and accessories. XF-86 therefore suits the final paint stage on builds where the finish itself is part of the scale impression, whether the goal is a muted service look, a toned-down race livery or a more even appearance across multiple painted parts.
XY acrylic colours
X-2 White Gloss, acrylic paint, 10 ml jar
300081502€3.591 l = €359.00
X-2 White Gloss is an X-Acrylic paint for plastic model building, supplied in a 10 ml jar for brush-applied color work on small parts, trim sections and touch-up areas. The white gloss finish gives surfaces a bright, clean look that stands out on body panels, interior details and contrast sections where a reflective coat is part of the final appearance. The paint is identified in the range as X-2 and belongs to the glossy X-Acrylic line. Its liquid format allows paint to be picked up directly with a brush and placed exactly where coverage is needed, which is useful for edging, layered coats and detail zones that call for careful control rather than broad coverage. The compact 10 ml volume fits focused paint sessions and keeps a dedicated white gloss shade ready for repeat work across multiple model stages. The safety data names the mixture as flammable and advises use in well-ventilated areas. On the workbench, this shade suits cockpit parts, trim lines, body accents and small corrections after assembly or masking. It also works as a clean contrast color alongside darker finishes, helping painted details read clearly on static display models and other scale subjects.
PS spray colours
PS-31 Clear Smoke, polycarbonate spray paint
300086031€10.991 l = €109.90
PS-31 Clear Smoke brings a transparent smoked tint to polycarbonate model surfaces in a 100 ml spray can, giving RC bodyshell projects a darker finish while keeping clear sections visually defined. The aerosol format suits broad curves and recessed contours alike, so shells, windows and detail areas can be coated with a consistent mist from the can. This paint is specified for polycarbonate, making it a direct match for model bodies formed from that material rather than a general craft coating. The Clear Smoke effect works where a transparent dark tone is needed instead of a solid colour, such as tinted windows, light sections or layered visual accents on racing and road car shells. The can format also supports quick coverage on larger body panels that would take longer with brush application. For multi-step finishing, PS-31 can be worked into masking plans and staged colour layouts on the inside of a shell, depending on the design being built. On the bench, the 100 ml volume suits both single-shell projects and detail-focused finishing sessions where several clear sections need the same tone. In RC body painting, it fits naturally into builds that call for smoked glazing, darker lamp treatment or added contrast across transparent molded parts. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-56 Flat Metallic Grey, acrylic paint, 23 ml
300081356€5.491 l = €238.70
XF-56 Flat Metallic Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-56 shade code. The flat metallic grey tone gives scale surfaces a restrained metal appearance that suits parts where a bright reflective finish would look out of place, such as mechanical sections, armour details or muted body accents. Within a paint range, the XF-56 code provides a clear reference point when a build calls for the same colour across separate sessions. The acrylic format makes this shade relevant for detail painting, edge correction and small-area finishing where colour control matters. The 23 ml volume offers a practical amount for repeated use on multiple sections of a model rather than a single pass on one part alone. The short designation on the jar also helps keep paint storage and build planning easy to follow when several greys and metallic tones are in use together. On the bench, this shade fits naturally into projects that need a subdued industrial look rather than a polished chrome effect. It can be used to define vents, housings, structural elements and other scale features where a flatter metallic character helps preserve the realism of the finished model.
XY acrylic colours
X-27 Clear Red Gloss, acrylic paint, 23 ml
300081027€5.491 l = €238.70
X-27 Clear Red Gloss is an acrylic paint for model building that combines a transparent red tone with a glossy finish in a 23 ml jar. The clear colour layer leaves underlying shapes visible, which makes it especially suited to parts that need tint rather than solid coverage, such as light lenses, canopies or other detail sections on scale builds. The X-Acrylic resin paint is supplied as a liquid coating for brush work on plastic model surfaces. Its transparent character allows the colour depth to build step by step, so a single coat can add a light tint while further coats intensify the red effect. This gives more control when matching small visual accents across body parts, interior details or custom display pieces. The gloss finish also helps reflective areas read more distinctly under light, which can sharpen the appearance of clear components and decorative highlights. On the workbench, the 23 ml volume supports both one-off detailing and repeated use across several projects. It fits naturally into finishing stages where selected sections need a coloured clear coat rather than an opaque paint layer. Use on model parts should follow the handling guidance on the label, as the paint is classified as flammable liquid and vapour and should be used in well-ventilated areas.
XY acrylic colours
X-7 Red Gloss, acrylic paint, 23 ml jar
300081007€5.491 l = €238.70
X-7 Red Gloss brings a bright, glossy red finish to plastic model building in a 23 ml jar that fits neatly into bench work focused on colour accuracy, trim painting and clean visual contrast. The liquid acrylic format supports brush application on smaller parts and detail zones where controlled placement matters. This paint belongs to the X-Acrylic range and is identified as X-7 Red Gloss, making it easy to match within planned colour schemes and repeat across multi-stage finishing work. The supplied quantity of 23 ml gives enough material for repeated use on separate sections, touch-ups or more than one build depending on coverage. The safety data names it as a glossy special acrylic resin paint for plastic model building, with binders, pigments and solvents forming the mixture. Its liquid consistency suits careful loading onto a brush for edges, recesses and defined surface areas that need a smooth coloured coat. On the workbench, the red gloss tone can be used for body highlights, painted accessories or contrast sections that need a brighter visual accent than darker base colours. During custom projects, the jar format keeps the paint ready for short detailing sessions as well as longer finishing stages where several small parts are painted in sequence.
XY acrylic colours
X-12 Gold Leaf Gloss, acrylic paint, 10 ml
300081512€3.591 l = €359.00
X-12 Gold Leaf Gloss is an X-Acrylic paint for plastic model building, supplied in a 10 ml jar for precise brush application on smaller sections and detail areas. The glossy metallic gold tone gives trim, emblems and selected surface features a brighter visual contrast, helping fine painted elements stand out once the model is finished. The paint is identified in the range as X-12 and belongs to the gloss version of the X-Acrylic line. The safety data names it as a liquid mixture with pigments, binders and solvents for plastic model use, with a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C. That compact jar size suits bench work where only a measured amount is needed for edging, small components or colour accents rather than broad coverage. On display pieces, military subjects, road cars or custom builds, metallic gold can be used to pick out selected shapes and markings with a reflective finish. Used with a fine brush, the 10 ml format supports controlled loading for corners, raised details and narrow borders. It fits naturally into model-paint storage with other colour jars from the same bench setup, ready for touch-up work, finishing passes or carefully placed decorative highlights on plastic assemblies.
XY acrylic colours
X-22 Clear Gloss, acrylic paint, 23 ml jar
300081022€5.491 l = €238.70
X-22 Clear Gloss is an acrylic paint for plastic model building that adds a transparent glossy finish in a 23 ml jar. The clear coat changes the surface look rather than the base colour, making it useful where a build needs more shine on body panels, trim sections or selected details that should catch the light differently from surrounding areas. The X-Acrylic resin paint is supplied as a liquid mixture for brush application, which helps with controlled coverage on smaller zones and careful touch-up work during finishing. The safety data sheet identifies the mixture as containing binders, pigments and solvents, and states a density of 1.0 g/ml at 23 °C. It also lists a boiling range of 80 to 120 °C and solvent content of 50 to 60%. These technical details place X-22 in the dedicated model paint category rather than a general craft coating. On the bench, this clear gloss coat suits builds that need a brighter final surface, a more polished look on selected parts or an even layer over painted sections before the next finishing step. The 23 ml size keeps enough paint on hand for repeated detailing sessions across multiple model projects.
Primers
Liquid Surface Primer Grey 40ml, hobby primer
300087075€7.191 l = €179.75
Liquid Surface Primer Grey 40ml is a brush-applicable hobby primer for model painting preparation and surface correction. The grey liquid comes in a compact 40 ml glass bottle with a ribbed white screw cap, ready for careful bench work on seams, joins and small surface marks before colour coats are applied. The formula is described for spray or brush application as a liquid primer for model kits, and the label information points to use on gaps and scratches that need correction. Grey pigment helps surface irregularities stand out during prep, which supports more deliberate sanding, filling and repainting steps on detailed parts. The mixture contains binders, pigments and solvents, giving it the character of a dedicated surface-prep coating rather than a general paint. Water solubility is only partial, and the safety data identifies the contents as a flammable liquid with a 15 °C flash point. On a workbench, the bottle suits focused touch-up jobs on body panels, fairings, armour sections or other model surfaces where a smooth paint base matters. Use is intended in well-ventilated conditions, and the primer is kept for hobby surface preparation rather than broad household repair tasks. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-60 Flat Dark Yellow, acrylic paint, 23 ml
300081360€5.491 l = €238.70
XF-60 Flat Dark Yellow is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss surface look. The defined XF-60 shade gives builders a consistent colour reference when separate parts need to align across the same scheme. The acrylic formula suits careful work on smaller sections where even coverage matters, such as panels, fittings or surface details that need a restrained finish rather than a reflective coat. Flat Dark Yellow works especially well where a subdued tone is needed for scale realism, scenery elements or worn-looking equipment. The 23 ml volume gives enough paint for repeated use across more than one session, which helps when a build calls for staged painting, later corrections or added detail after the main coat has dried. On the bench, this paint fits naturally into focused finishing work, from picking out individual components to carrying one colour through a broader model scheme. It also supports consistent touch-up work when matching earlier painted sections matters as much as the first coat.
XY acrylic colours
XF-64 Flat Red-Brown, acrylic paint, 10 ml
300081764€3.591 l = €359.00
XF-64 Flat Red-Brown brings a subdued, earthy colour note to model finishing in a compact 10 ml format. The flat finish keeps surfaces visually restrained, which suits scale subjects where low-sheen colour treatment matters across trim, equipment, interior sections or weathered exterior areas. As an acrylic paint, XF-64 supports careful application on smaller zones that need controlled coverage rather than broad, heavy coating. The Flat Red-Brown tone works where a red-brown accent, worn surface effect or muted equipment colour is needed, and the 10 ml jar size keeps the paint easy to handle at the workbench. The shade designation XF-64 also helps place the colour clearly within an established model paint range when planning multi-colour finishing steps. The visible hazard pictograms indicate that the paint should be handled with appropriate care during use and storage. On military builds, diorama details or scale accessories, this colour can be used to pick out selected parts, add tonal variation or support weathered effects with a flatter surface appearance. It also suits touch-up work when a specific red-brown shade is needed without opening a larger paint format.
XY acrylic colours
XF-84 Flat Dark Iron, acrylic paint, 10 ml
300081784€3.791 l = €379.00
XF-84 Flat Dark Iron acrylic paint gives scale models a muted metallic tone that reads as worked metal rather than bright chrome. The 10 ml jar suits focused bench sessions where smaller parts, exposed mechanisms and structural details need a darker iron finish with a flat appearance. The shade is identified as dark iron and metallic, making it useful for armour sections, industrial surfaces and vehicle parts that benefit from a subdued metal look. The paint is supplied as a liquid coating and has an approximate density of 1.2 g/mL at 23 °C. The safety data lists a flash point of 33 °C and classifies the paint as flammable, with eye irritation and inhalation warnings. Use in well-ventilated areas and keep it away from heat, sparks and open flames. On the workbench, XF-84 fits neatly into weathering passes, detail painting and colour blocking across mechanical assemblies. It can be used to deepen contrast on tools, brackets and metal panels, or to break up larger painted areas with a darker industrial note that keeps the finish restrained rather than reflective.
Airbrush accessories
Airbrush Cleaner Acryl 250ml, model paint care
300087089€12.991 l = €51.96
Airbrush Cleaner Acryl 250ml supports consistent maintenance for painting equipment used in model finishing. The cleaning formula is intended for airbrush care and works where dried residue and tarnishes can collect inside the intricate airbrush system, helping keep the mechanism clear for later use. The 250 ml format gives a practical reserve for repeated bench work, whether the session involves frequent colour changes, end-of-day cleanup or restoring tools after weathering work. In addition to airbrush components, the cleaner can be used on weathering sticks and paintbrushes, so one bottle covers several parts of a painting setup. The rectangular bottle shape sits neatly on a shelf or workbench, and the ribbed screw cap supports a secure grip when opening and closing between tasks. Used as part of regular care, this cleaner fits naturally into model painting routines where spray equipment, brushes and finishing tools all need dependable cleanup. It suits bench setups focused on acrylic work and helps keep maintenance close at hand between priming, colour coats and detail finishing. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-23 Clear Blue Gloss, acrylic paint, 10 ml
300081523€3.591 l = €359.00
X-23 Clear Blue Gloss is an acrylic resin paint for plastic model building that gives parts a transparent blue tone with a glossy finish. The clear colour layer keeps underlying shapes and surface detail visible, which suits sections where the moulding, panel lines or lens texture should still read through the coating. The paint comes in a 10 ml jar, a practical size for repeated detail sessions on smaller components and selected accent areas. In the X-Acrylic range, this shade is positioned for brush-applied colour work on model surfaces that call for a tinted rather than opaque result. The clear blue effect can be used to alter the appearance of transparent parts, add colour variation to light units, or create a cooler finish on trim pieces. The glossy character gives the coated area a brighter, smoother look than a flat finish. On the workbench, X-23 Clear Blue Gloss fits projects that need controlled colour placement instead of full-body coverage. It works well when separate sections of a model call for a distinct transparent tone, such as lenses, windows, instrument details or decorative highlights on plastic parts.
XY acrylic colours
Paint Retarder Acrylic, paint additive, 40 ml
300087114€5.791 l = €144.75
Paint Retarder Acrylic is a paint additive for model finishing that slows the drying of acrylic paint and gives each coat more time to settle. Whether acrylic paint is applied with an airbrush or a brush, the extended working time supports a smoother surface and helps the paint flow out more evenly across the model. The formula can be used at up to a 1:10 ratio with acrylic paints, which makes it easy to mix a controlled amount into the paint already prepared for a session. A 40 ml bottle provides enough material for repeated use across touch-ups, larger painted sections and gloss-focused work. By delaying the drying phase, the additive helps reduce the chance of a grainy result, especially where an even coat matters for visible exterior parts. On body shells, panels and smaller detail areas, the slower drying action gives wet paint a longer window to level before it sets. That makes it useful for brush painting, airbrushed coats and finishing steps where a cleaner glossy surface is the goal. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-6 Orange Gloss, acrylic paint, 10 ml jar
300081506€3.591 l = €359.00
X-6 Orange Gloss brings a bright orange tone and a reflective finish to plastic model building, with 10 ml of acrylic paint sized for detail painting, touch-ups and focused colour work on smaller sections. The compact jar format keeps the paint easy to store alongside other modelling colours while supporting controlled brush use on parts that need crisp placement. The paint is identified as X-Acrylic Paint and is intended for plastic model building. Its gloss surface suits areas where a smoother, shinier look is part of the finished effect, whether on body accents, trim pieces or painted markings. The mixture contains binders, pigments and solvents, and the safety data identifies it as a flammable liquid with hazard statements H226, H318 and H336. The liquid has a density of 1.0 g/ml at 23 °C, a flash point of 31-33 °C and an alcohol-like odour. On the workbench, X-6 Orange Gloss fits neatly into colour planning for custom schemes, motorsport-inspired details or restoration of small painted sections on existing models. The 10 ml quantity also makes it practical for keeping a specific orange shade on hand for repeat jobs across separate builds, spare parts and later corrections.
XY acrylic colours
XF-61 Flat Dark Green, acrylic paint, 23 ml
300081361€5.491 l = €238.70
XF-61 Flat Dark Green is an acrylic paint in a 23 ml jar, giving model builders a compact colour supply for detailed bench work and controlled coverage on scale projects. The flat finish keeps the surface non-glossy, which suits military subjects, field equipment and scenery sections where a subdued painted look matters. The XF designation identifies this shade within the acrylic paint range, and the 23 ml format is easy to handle during brush work, touch-ups and repeated colour application across separate build stages. Flat Dark Green works well where a darker green tone is needed for camouflage areas, terrain pieces or accessory parts that should not reflect light strongly. The jar size also fits neatly into organised paint storage with other modelling supplies. On the workbench, this colour can be used for base layers on vehicle panels, for refining smaller details on accessories, or for adding depth to diorama elements. During longer hobby sessions, the compact jar format keeps the paint close at hand for repeat use across multiple model sections.
XY acrylic colours
XF-62 Flat Olive Drab, acrylic paint, 23 ml
300081362€5.491 l = €238.70
XF-62 Flat Olive Drab is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a matte olive drab shade. The colour suits military subjects, field equipment and scenery elements where a subdued surface tone is needed instead of a gloss finish. The acrylic formula supports controlled application during detail painting and broader coverage on larger sections, depending on the tool and technique used. A 23 ml jar gives a practical amount for repeated bench sessions, whether the work focuses on body panels, accessories or terrain pieces. The flat finish helps maintain the muted look often associated with service vehicles and equipment, making the shade useful when several connected parts need a consistent colour direction. The XF designation also helps builders identify the exact shade again when expanding an existing project or matching later touch-up work. On the workbench, this paint fits naturally into the finishing stage of scale builds, diorama elements and restoration-style repainting of selected parts. It also works well when one model calls for a single military base tone across storage gear, exterior sections and small fitted details.
XY acrylic colours
X-20A Thinner 23 ml, acrylic paint thinner
300081020€5.991 l = €260.43
X-20A Thinner is a compact 23 ml thinner for acrylic paint work, supplied in a clear glass jar with a white ribbed screw cap that suits precise bench use. The formula is identified for Tamiya acrylic and polycarbonate paints, supporting controlled dilution when paint needs a lighter mix for fine coverage, edge work or airbrush preparation. The liquid is colourless, carries a solvent odour and is partially soluble in water. Technical data in the safety sheet lists a density of 0.93 g/ml at 20 °C, a boiling range of 97 to 174 °C and a flash point of 32 °C. The same document identifies the mixture as solvent in water with 45% solvent content, including 35% propan-1-ol and 10% 3-methoxy-3-methylbutan-1-ol. ASTM D4236 conformity is stated on the label. On the workbench, the 23 ml size fits short mixing sessions, detail painting and routine tool care after brush or airbrush use. The screw-cap jar stores neatly beside paints and can be opened for small measured amounts when cleaning dried residue from tools and painted surfaces is part of the job. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-5 Black Semi Gloss, paint, 10 ml bottle
300082105€3.491 l = €349.00
LP-5 Black Semi Gloss is a 10 ml paint bottle for model finishing, detail work and colour correction where a black tone with a measured sheen fits the subject better than a full gloss surface. The semi gloss effect gives panels, trim and smaller parts a defined look while keeping reflections more restrained. The LP-Paint designation makes this shade easy to identify within a broader paint setup, especially when several blacks and clear coats are used during one build. The 10 ml size suits targeted application on selected sections rather than broad coverage, which helps when working on cockpit parts, exterior accents or small replacement pieces. Black is one of the most frequently used colours in scale modelling, so a clearly marked bottle supports repeat use during touch-ups and later adjustments. The compact format also stores neatly alongside other finishing supplies on a modelling bench. LP-5 fits naturally into build sessions that move between assembly, surface preparation and final detailing. It can be kept ready for repainting small areas, refining contrast on trim, or adding a controlled dark finish to parts that need more definition within the completed model.
XY acrylic colours
X-8 Lemon Yellow Gloss Acrylic Paint, 10 ml
300081508€3.591 l = €359.00
X-8 Lemon Yellow Gloss brings a vivid lemon yellow tone to plastic model building with a glossy surface that catches light on trim, markings and painted details. The 10 ml jar size suits focused bench work where a specific colour is needed for smaller sections rather than broad coverage. This acrylic resin paint is identified in the safety data as a glossy brush paint for plastic model building and is formulated from binders, pigments and solvents. The liquid mixture has a density of 1.0 g/ml at 23 °C, a flash point of 31 to 33 °C and a solvent content of 50 to 60%. The data sheet also lists a boiling range of 80 to 120 °C and notes partial water solubility of the solvents. These technical details place the paint clearly in the hobby finishing category rather than as a general craft colour. On the bench, the bright gloss shade works well for visual contrast on panels, striping, small accessories and highlighted sections that need a cleaner, more reflective finish than a flat colour provides. The compact jar size also makes it practical to keep a dedicated yellow tone ready for repeat touch-ups across model projects.
XY acrylic colours
XF-19 Flat Sky Grey, acrylic paint, 23 ml
300081319€5.491 l = €238.70
XF-19 Flat Sky Grey brings a muted grey tone to scale painting work, with a 23 ml jar size that fits neatly into regular bench use and repeat colour planning. The acrylic formula suits model finishing where a flat surface appearance is needed, whether the goal is broad base coating, smaller section work or careful colour blocking on shaped parts. The XF-19 code gives this shade a fixed place within a wider paint system, which helps when a build calls for the same grey across separate stages or matching parts. Flat Sky Grey works well where a restrained, non-gloss finish is required, and the jar format keeps the paint ready for measured use during detail painting or larger coverage passes. The product data identifies flammable and warning hazard pictograms, so handling should follow the label guidance during workshop use. On the bench, this shade fits projects that rely on technical greys rather than bright accent colours, from cockpit areas and structural sections to exterior panels on scale subjects. It also supports repainting, corrections and colour continuity when several assemblies need the same tone at different moments in the build.
XY acrylic colours
XF-2 Flat White, acrylic paint, 10 ml jar
300081702€3.591 l = €359.00
XF-2 Flat White is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled use on smaller parts, detail sections and colour corrections. The matte white tone gives scale surfaces a flat appearance that suits finishes where shine would distract from panel lines, contours or weathering effects. The paint is identified as XF-02 Flat White in the safety data and is described there as a liquid brush paint. Its density is listed as 1.2 g/mL at 23 °C, and the flash point is 33 °C. The safety classification also states flammable liquid and vapour, eye irritation, harmful if inhaled, and possible drowsiness or dizziness, which makes careful handling and good ventilation important during painting sessions. The container stays compact on a modelling bench and keeps a measured amount ready for repeat use across smaller assemblies. On a build table, this colour can be used for base coats on selected parts, crisp contrast details, or refinements after assembly and masking. The 10 ml volume suits hobby work that calls for precision rather than bulk coverage, whether the focus is cockpit details, body accents or finishing passes on scale accessories.
Polish, cleaners, aging materials
Polishing Compound Finish, model polishing paste
300087070€13.491 l = €613.18
Polishing Compound Finish is a model polishing paste for the last stage of surface work, created to bring painted sections and transparent parts to a more refined gloss. The finish grade follows the coarser steps in the polishing sequence and uses very fine abrasive particles, so the paste can work on light haze while supporting a deeper mirror-like result on high-grade painted surfaces. The 22 ml tube keeps the compound easy to dispense in small amounts for focused work on canopies, body panels and other detailed areas. Its paste consistency helps keep the material on the target area instead of running across nearby detail. The compound was developed for plastic model making and is also suited to parts where metal polish cannot be used. According to the supplied safety data, it is an O/W emulsion with additives, white in colour, partially emulsifiable in water, with a pH value of 9.5 at 25 °C and a relative density of 1.0 at 20 °C. On the workbench, this finish compound fits the final pass after earlier polishing grades, when the aim is to lift clarity on clear parts or add extra depth to a painted shell. It also suits careful touch-up work on small sections that need a more even final sheen rather than a broad sanding step. Warning! Not suitable for children under 14 years.
TS spray colours
TS-8 Italian Red Gloss, spray paint, 100 ml
300085008€10.491 l = €104.90
TS-8 Italian Red Gloss brings a vivid gloss red finish to plastic model surfaces in a 100 ml spray format that covers broad exterior areas quickly and evenly. The special acrylic resin paint is designed for model work, making it a practical choice for body shells, fairings, panels and other visible outer parts where a smooth colour coat shapes the final look. The aerosol format changes how the paint is applied: light passes from the can lay colour across curves, edges and larger sections without the brush marks that can interrupt a uniform surface. The label identifies this as paint for plastics, so it fits projects built around plastic model components rather than general household use. As part of the TS spray range, the shade name TS-8 Italian Red Gloss gives a clear match point when planning a specific colour scheme or replacing a previous can in an ongoing build. On the bench, the 100 ml volume suits full-body colour work as well as refresh coats on selected sections. The gloss finish works especially well on racing, road or custom subjects where a strong red surface and clean reflections help the painted parts read clearly once decals and final details are added. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-10 Gun Metall Gloss, acrylic paint, 23 ml
300081010€5.491 l = €238.70
X-10 Gun Metall Gloss brings a dark metallic sheen to scale model finishing, with a 23 ml jar size that suits repeated detail work across body parts, cockpit sections and exposed mechanical areas. The acrylic paint format supports brush application on plastic model builds, where controlled placement matters on edges, recesses and smaller shaped surfaces. The Gun Metall shade sits between grey and silver, giving panels, trim and technical components a colder metal look than a plain neutral colour. Its gloss finish catches light differently across raised detail, which helps rivets, vents and molded structure read more clearly once painted. The safety data identifies the paint as a liquid coating with metallic colour, a density of 1 g/mL at 23°C and a flash point of 31-33°C. The same documentation lists a boiling range of 80-120°C and an alcohol odour, reflecting the solvent-based acrylic resin formulation used for this colour. On a workbench, the jar size supports anything from a single highlight pass to broader finishing sessions on several subassemblies. It suits model makers adding metallic contrast to vehicle parts, equipment details or selected surface sections where a gloss metal tone gives the build a sharper, more technical finish.
XY acrylic colours
XF-23 Flat Light Blue, acrylic paint, 10 ml
300081723€3.591 l = €359.00
XF-23 Flat Light Blue is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled use on smaller sections, trim areas and colour corrections. The flat finish gives the shade a muted surface appearance, making it useful where a non-gloss light blue is needed across detailed builds and painted accessories. The acrylic formula suits careful brush application on edges, panels and fine raised details where clean placement matters. The 10 ml volume keeps the jar compact on a hobby bench while still offering enough paint for repeated touch-ups and small-scale colour work. As a dedicated shade in the XF range, XF-23 gives model builders a clearly identified colour reference that is easy to return to when matching earlier paint steps or extending an existing scheme. On aircraft, vehicles or scenery sections, the Flat Light Blue tone can be used to pick out selected areas, refresh worn paintwork on a finished build or support layered finishing across multiple sessions. The jar format also makes it easy to store alongside other modelling supplies so the shade stays ready for precise, repeatable paint application when the next stage of a build calls for it.
XY acrylic colours
XF-5 Flat Green, acrylic paint, 10 ml jar
300081705€3.591 l = €359.00
XF-5 Flat Green brings a muted colour tone to scale modelling work in a compact 10 ml jar that fits neatly into a bench setup for painting sessions, touch-ups and finishing passes. The acrylic formula suits controlled application on smaller sections, where measured brushwork and clean colour placement matter across vehicle parts, accessories or scenery details. The flat finish gives surfaces a non-gloss appearance that works well when a build calls for a subdued painted look rather than a reflective sheen. Within a paint range, this shade can be used for panel sections, equipment details and terrain elements that benefit from a restrained green tone. The 10 ml size also helps organise multiple colours in a modelling collection without taking much storage space. As a dedicated modelling paint, it supports careful colour planning across separate stages of a build, from base coating selected areas to later correction work on edges and small components. On the workbench, the jar format is easy to place beside brushes, palettes and other finishing tools during focused painting tasks. It suits projects where small parts, surface variation and precise colour matching shape the final appearance of the model.
XY acrylic colours
X-12 Gold Leaf Gloss, acrylic paint, 23 ml
300081012€5.491 l = €238.70
X-12 Gold Leaf Gloss brings a metallic gold finish to plastic model building with a 23 ml jar sized for detail work, trim accents and repeated brush sessions. The glossy formula suits parts that need a brighter visual contrast, from decorative panels to small raised sections that catch light on the finished build. This X-Acrylic paint is identified in the supplied safety data as a liquid mixture of binders, pigments and solvents for plastic model building. The data sheet lists a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C, underlining that this is a specialist modelling paint rather than a general craft colour. The finish is specified as gloss, which helps metallic areas read more clearly on shaped surfaces and fine moulded detail. Gold Leaf works especially well where a build needs a distinct metallic note alongside base colours, lining or small visual highlights. On the workbench, the 23 ml jar gives enough paint for careful edging, repeat coats and later corrections on matching sections. During painting sessions, the liquid format supports measured loading on a brush for controlled application across narrow parts, trim lines and compact assemblies.
XY acrylic colours
X-4 Blue Gloss, acrylic paint, 23 ml jar
300081004€5.491 l = €238.70
X-4 Blue Gloss brings a vivid blue tone and a reflective finish to model painting, with a 23 ml jar size that suits repeated detail work as well as broader brush-applied sections. The acrylic paint is identified in the data as a gloss brush paint for model building, giving a clear match between colour code and intended use at the workbench. The formula is listed as a liquid mixture of binders, pigments and solvents, with blue colour, alcohol odour and a density of 1 g/mL at 23°C. Safety data also states a boiling range of 80-120°C and an ignition temperature of 278°C, alongside a vapour pressure of 42.7 hPa at 20°C. These technical values place X-4 within the category of hobby paints that need deliberate, controlled handling during application and storage. The gloss finish is especially useful where a painted surface needs a brighter reflected look than a flat coat would give. On the bench, the 23 ml volume supports repeat use across multiple sessions, whether covering trim pieces, refreshing a colour section or adding blue contrast to selected components on a scale build. The jar format keeps the paint ready for careful brush loading during small-part work, while the coded X-4 designation makes it easy to identify within a paint range.
Primers
Liquid Surface Primer White 40ml for Model Prep
300087096€6.991 l = €174.75
Liquid Surface Primer White 40ml adds a preparatory coating step before paint reaches the model, giving small parts and shaped surfaces a white base that supports a cleaner finish. The 40 ml bottle suits bench work where measured amounts and steady handling matter, whether the task is covering a single body section or touching smaller components before colour is applied. The white primer is especially useful when the planned paint scheme uses lighter shades, because the undercoat influences how those colours read once dry. Its liquid form makes it suitable for detailed model work where recessed lines, edges and contours need coverage that a broad sanding step alone cannot provide. The square glass bottle with ribbed screw cap stores neatly between sessions and keeps the contents ready for repeated use across ongoing builds. The bottle label identifies the contents clearly as white liquid surface primer, which helps keep paint and preparation materials distinct on a busy workbench. In a model painting setup, this primer fits naturally into the stage between surface preparation and colour coats. It can be used when refining a fresh build, reworking a section before repainting, or preparing individual parts that need a lighter base before the final finish is added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-30 Metallic Silver Gloss, spray paint, 100 ml
300085030€10.491 l = €104.90
TS-30 Metallic Silver Gloss is a spray paint for model finishing that combines a metallic silver tone with a gloss surface in a 100 ml aerosol format. The special acrylic resin spray is intended for model work, where broad panels, curved sections and shaped parts benefit from an even coat laid down by a fine spray rather than a brush. The can is marked for plastics, making it suitable for compatible plastic model parts that need a uniform metallic appearance. Aerosol application helps cover contours, edges and recessed areas with the same colour character, which is especially useful when a build includes multiple connected surfaces. The metallic silver shade works well wherever a bright machined look, body colour accent or reflective trim effect is wanted on scale subjects. The gloss finish also gives decals and further detailing a clean painted base once the coat has cured. On the workbench, TS-30 suits body panels, fairings, exterior parts and other prepared components that call for a sprayed finish instead of hand brushing. The 100 ml can size fits both single-colour touchups and broader coverage across larger model sections. Use only with the handling care required for an aerosol paint. Warning! Not suitable for children under 14 years.
TS spray colours
TS-79 Semi Gloss Clear, paint spray, 100 ml
300085079€11.491 l = €114.90
TS-79 Semi Gloss Clear is a 100 ml paint spray for model finishing, designed to give larger surfaces a semi gloss clear coat with the speed and coverage of a synthetic lacquer aerosol. The fast-curing formula helps move a build from colour work to final surface treatment without a long wait between stages. This spray is especially useful on broad model areas where a brush can leave visible overlap, such as car bodies, fairings and other shell sections. The semi gloss finish sits between flat and full gloss, making it suitable for builds that need a softer final sheen rather than a high-shine coat. A 100 ml can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a concrete guide for planning workshop stock and multi-build sessions. The formula also supports layered finishing, because enamel and acrylic paints can be added after the overall coating stage for smaller details and accents. On the bench, TS-79 works well as the clear stage after the main colour has been completed and dried. It suits modelers who want consistent coverage across larger panels, then return with finer brush-painted details to complete trim, markings or small visual contrasts. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-20A Thinner 46 ml, acrylic paint thinner
300081030€8.991 l = €195.43
X-20A Thinner is a 46 ml acrylic paint thinner for model finishing work, supplied in a compact bottle that fits neatly on a hobby bench beside paints, palettes and cleaning tools. It is intended for thinning Tamiya acrylic and polycarbonate colors, helping painters adjust paint flow for finer brushwork and more controlled coverage on detailed model surfaces. The formula is a liquid solvent in water and appears clear in the bottle. According to the supplied safety data, it has a density of 0.93 g/ml at 20 °C, a flash point of 32 °C and partial solubility in water. These technical details matter during measured mixing and cleanup, where only small amounts are typically needed at a time. The bottle uses a ribbed screw cap for secure closure between sessions, and the 46 ml fill size suits regular bench use without taking much space among paints and tools. On a painting table, X-20A can be used when acrylic color needs a different working consistency for detail areas, edges or smooth coats. It also suits cleanup after painting, when brushes or airbrush parts need fresh thinner to loosen remaining color before the next stage of model work. Warning! Not suitable for children under 14 years.
XY acrylic colours
XF-3 Flat Yellow, acrylic paint, 23 ml jar
300081303€5.491 l = €238.70
XF-3 Flat Yellow brings a defined matte yellow tone to model painting in a 23 ml jar that sits neatly on the bench and keeps the colour close at hand during detail work. The acrylic formula gives builders a dedicated paint option for small sections, trim areas and surface accents where a flat finish suits the subject better than gloss. The 23 ml volume offers enough paint for repeated use across separate stages of a build, whether the task is picking out cockpit details, adding utility markings or covering selected panels with a solid yellow tone. The jar format supports controlled brush loading and helps keep colour changes organised when several shades are in use at once. Within the XF range, Flat Yellow works as a specific colour reference rather than a mixed approximation, which helps when a scheme calls for a consistent matte yellow across multiple parts. On the workbench, this paint suits careful finishing passes on scale vehicles, figures and scenery pieces where crisp placement matters. It also fits repair and touch-up tasks after assembly, when a small amount of matching colour is needed to complete edges, joins or added details.
Lacquer colours
LP-38 Flat Aluminum, paint, 10 ml bottle
300082138€3.491 l = €349.00
LP-38 Flat Aluminum brings a subdued metallic shade to scale finishing work in a compact 10 ml bottle. The flat effect gives aluminum areas a softer, less reflective appearance than a gloss metallic, which suits machinery, body details and surface sections that need a more restrained metal look on a finished model. This paint sits in the LP paint range and is identified as LP-38 Flat Aluminum in the colour lineup. The 10 ml content works well for bench setups where several shades are kept close at hand for layered painting, small corrections and repeated detail passes. The muted aluminum tone can be used to separate vents, panels, housings or trim from neighbouring colours, helping painted sections read more clearly at scale. On military, automotive or mechanical subjects, the flatter sheen also supports weathered or functional-looking metal areas instead of a polished finish. At the workbench, the bottle size suits focused sessions where only a small amount is needed at a time. It fits naturally into paint racks, tool drawers and organised hobby stations, ready for touch-up work, accent painting or planned colour placement across a larger build.
Lacquer colours
LP-61 Flat Metallic Grey, paint, 10 ml
300082161€3.591 l = €359.00
LP-61 Flat Metallic Grey is a modelling paint in a 10 ml jar, sized for controlled application on smaller painted sections and detail work. The flat metallic grey tone gives scale surfaces a subdued metal look, making it useful where a finish needs metallic character without a glossy sheen. Within a paint lineup, this shade can be used to separate mechanical areas, trim sections and other picked-out details from surrounding colours. The 10 ml content supports measured use, whether the task is a first coat on a small part or a later colour match during ongoing finishing work. The jar format also keeps the colour easy to identify and return to between painting sessions, which helps when a build is completed in stages rather than in one sitting. For model makers working through careful surface finishing, a dedicated metallic grey expands the range of tones available beyond plain solid colours. On the bench, LP-61 Flat Metallic Grey suits focused jobs such as painting selected components, refining visual contrast on assembled sections or revisiting earlier work for consistent colour continuity. Stored alongside other modelling supplies, the clearly designated shade is ready when a build calls for a restrained metallic accent rather than a bright reflective finish.
Brushes and accessories
Pipette Set 90mm/150mm, paint tool set, 3+3
300087124€8.29
This pipette set supports accurate paint handling for brush work and airbrush preparation with 2 useful lengths in one pack. It contains 3 short pipettes at 90 mm and 3 long pipettes at 150 mm, giving a simple way to transfer, measure and mix paint with more control across different bottle sizes. The 90 mm pipettes have a narrower shape than regular pipettes, which helps when reaching into slim openings where a wider tube is awkward to place. They are convenient for use with 10 ml paint and 40 ml bottles, while the longer 150 mm version adds extra reach for deeper containers. Graduation markings on each pipette show the amount withdrawn, making it easier to repeat paint mixes and adjust concentration with a clear visual reference. The solvent-resisting PE resin construction is suited to regular contact with hobby paints. On the workbench, the set fits naturally into mixing, thinning and transferring tasks without taking up much space. Keeping both short and long pipettes close at hand helps separate colours or mixtures and supports cleaner, more consistent paint preparation across different modelling sessions. Warning! Not suitable for children under 14 years.
Primers
Surface Primer Grey 100ml, model primer for ABS
300087026€9.291 l = €92.90
Surface Primer Grey 100 ml is a model primer for preparing parts before painting, with a formula suited to ABS, styrene and metal. The grey tone creates a neutral base that works especially well under darker colours, helping the next paint layer read more evenly across the surface. Before colour coats are added, the primer can be applied to body sections, detail parts and other model components that need a consistent starting layer. ABS and styrene are common materials in model building, and the added suitability for metal parts makes the can useful across mixed-material assemblies. The primed surface may also be wet sanded before paint is applied, which supports finer surface correction where seams, mould lines or small imperfections need extra preparation. Each can contains 100 ml, a practical size for regular bench use without taking up much space in the work area. On a build table, this primer fits naturally into the paint-prep stage, whether the task is coating a single replacement part or readying a full shell for darker finishes. It also suits projects where plastic and metal components appear side by side and need the same grey undercoat before the final colour is sprayed. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-2 White Gloss, acrylic paint, 23 ml jar
300081002€5.491 l = €238.70
X-2 White Gloss is an acrylic brush paint for model making, supplied in a 23 ml jar for detailed finishing work. The white gloss shade brings a bright, reflective surface to selected sections, whether the aim is to pick out trim, cover small parts or add contrast against darker colours on a build. The formula is identified in the safety data as a liquid acrylic resin special paint for brush application, with pigments, binders and solvents. That liquid format makes it suitable for loading a brush directly from the jar and working into corners, edges and other defined areas on model parts. The paint is listed with a density of 1 g/mL at 23 °C, and the safety data names an alcohol-like odour as part of the material profile. For storage and handling, the container should be kept tightly closed in a cool, well-ventilated place. On the workbench, this 23 ml size suits repeat touch-ups, small assemblies and colour matching across multiple sections of the same build. The glossy white finish can be used where a clean, light surface is needed on exterior panels, interior details or other brush-painted components in a model project.
XY acrylic colours
XF-10 Flat Brown, acrylic paint, 23 ml
300081310€5.491 l = €238.70
XF-10 Flat Brown is an acrylic paint for model finishing, supplied in a 23 ml jar for compact bench use and controlled access during painting sessions. The flat brown tone gives parts, panels and scenic details a matte surface appearance that suits weathered sections, interior areas and earth-toned accents on scale subjects. The XF designation identifies this shade within the Tamiya paint range, which helps when planning color layouts across separate stages of a build. The jar format keeps the paint contained between sessions and supports measured use for smaller quantities on detail-focused work. Flat brown can be used to pick out trim, tools, stowage areas or terrain features where a low-sheen finish fits the subject better than a gloss surface. The 23 ml content also makes it practical to keep several distinct tones on the workbench without taking up much space. On a model bench, this paint suits careful brushwork on cockpit sections, equipment details or groundwork elements that need an earthy, subdued tone. It also fits touch-up tasks after assembly or finishing steps, where a clearly coded shade helps keep the color choice consistent across separate parts and later corrections.
XY acrylic colours
XF-53 Flat Neutral Grey, acrylic paint, 23 ml
300081353€5.491 l = €238.70
XF-53 Flat Neutral Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the shade code XF-53. The flat neutral grey tone suits scale subjects that call for a muted, non-gloss surface, whether the goal is full-area coverage on smaller parts or careful colour placement on selected sections. Within a modelling setup, the coded jar format makes the paint easy to recognise, sort and return to during multi-step painting work. The 23 ml volume gives a practical amount for repeated bench sessions, and the flat finish direction supports weathered, technical or understated colour schemes where shine would look out of place. The neutral grey tone also works well alongside stronger accent colours, darker mechanical sections or layered finishing plans that rely on restrained base shades. Hazard pictograms shown for this paint indicate that careful handling is required during hobby use. On the workbench, XF-53 can be used for detail passes, touch-up stages and planned colour blocking across model components. The compact jar size stores neatly with other paint supplies and keeps a frequently used grey tone close at hand for ongoing builds and refinishing tasks.
XY acrylic colours
XF-57 Flat Buff, acrylic paint, 23 ml jar
300081357€5.491 l = €238.70
XF-57 Flat Buff is an acrylic paint in a 23 ml jar, supplied as a yellow-brown shade for scale modelling and finishing work. The flat finish keeps reflected light low, so painted sections read as muted colour rather than gloss, which suits military subjects, weathered equipment and scenery details on dioramas. The XF series designation gives this colour a clear place within a wider modelling paint range, helping with repeat use across touch-ups, matched details and ongoing build plans. The yellow-brown tone works well on dust effects, fabric impressions, wood-like details and aged trim where a cleaner bright colour would look out of place. The jar format keeps the paint contained between sessions and makes it easy to return to the same colour on later stages of a project. On the bench, XF-57 fits neatly into detail painting, selective panel work and finishing passes on smaller parts. The packaging image shows flame and warning hazard symbols, so handling and storage should follow the caution marking shown for this paint during hobby use.
Brushes and accessories
Brush Conditioning Fluid 23ml, brush care fluid
300087181€5.191 l = €225.65
Brush Conditioning Fluid 23ml adds a dedicated care step to model painting by treating brush bristles after cleaning and before storage. The compact 23 ml bottle sits easily on a hobby bench, and the screw-cap format keeps the liquid contained between sessions. The fluid is presented in a clear glass bottle and appears as a transparent liquid, while the side label indicates handling points such as shaking before use and using appropriate thinner for brush cleaning beforehand. The bottle is intended for brush maintenance rather than paint thinning, so it fits naturally into the finishing stage of a painting routine. The safety sheet identifies the mixture as an O/W emulsion, and the storage guidance states protection from frost, heat and direct sunlight. The same document notes that the liquid is emulsifiable in water at 20 °C. On the bench, this kind of brush care works well after detail painting, figure finishing or body shell decoration, when a brush has already been cleaned and the bristles need conditioning before the next session. It also suits longer breaks between projects, when keeping brush shape during storage matters as much as the paintwork itself. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Polishing Compound Fine, model finishing paste
300087069€6.691 l = €304.09
Polishing Compound Fine is a model finishing paste made for careful surface work on painted sections, clear parts and metal details. The fine grade targets light marks and supports a more even gloss, making it useful when a build is close to its final finish and small imperfections still catch the light. The compound comes in a 22 ml tube and uses a paste consistency that stays manageable on small parts and narrow sections. This format helps place the material where it is needed instead of flooding surrounding detail, which matters on canopies, body panels and trim pieces with tight edges. The product is identified for model making use, and the fine abrasive level fits later polishing stages after heavier correction work is complete. The safety data lists the mixture as an O/W emulsion with additives, with a pH value of 8.3 at 25 °C and a relative density of 1.1 at 20 °C. On the workbench, it suits the final refinement of a painted shell, the clearing of faint handling marks on transparent parts, or the brightening of small metal areas that need a cleaner finish. Use in areas with adequate ventilation and store the closed container away from heat and direct sunlight. Warning! Not suitable for children under 14 years.
PS spray colours
Polycarbonate Body Cleaner, model paint prep 40ml
300087118€7.591 l = €189.75
Polycarbonate Body Cleaner is a 40 ml surface-prep solution for polycarbonate bodies that streamlines the stage before painting. Instead of washing a shell with detergent, waiting for it to dry and then moving on to colour work, this cleaner prepares the surface directly so paint prep can start sooner on clear or coloured body panels. The formula is intended for hobby maintenance as well as refinishing work. It removes oils and grease from the body surface before paint is applied, and it can also remove completely dried paint when a shell needs to be stripped back for another finish. Scuff marks from normal roll overs during everyday driving can be cleaned away without damaging the body surface, which makes the bottle useful beyond the paint bench. An added antistatic agent helps reduce static electricity build-up on the R/C model, a practical detail when handling lightweight polycarbonate shells. On a workbench, the cleaner suits body preparation before masking and painting, and after running sessions it can be used to freshen marked areas on the shell. The compact bottle format keeps the liquid easy to store with other model supplies while staying ready for regular body care. Warning! Not suitable for children under 14 years.
PS spray colours
PS-55 Flat Clear, polycarbonate spray paint
300086055€12.191 l = €121.90
PS-55 Flat Clear is a polycarbonate spray paint designed to give RC bodyshells a matt clear finish while preserving selected glossy details. Applied over the inside of a polycarbonate body, the coating changes the surface effect without covering the underlying colour, so the shell keeps its painted appearance with a flatter final look. The masking method is what makes this spray especially useful for detailed bodywork. Headlights, windows, rear lights and other areas that should stay glossy are masked from the outside before spraying, while the remaining surfaces receive the flat clear coat. This creates a clear visual contrast between transparent or light-style sections and the surrounding panels. The 100 ml can suits hobby bench use and gives enough material for focused finishing work on model car bodies and similar formed polycarbonate parts. In workshop use, PS-55 fits the final stage of body preparation, when a painted shell needs a different surface character rather than a new colour. It works well for race bodies, road car shells and custom RC projects where matt panels and glossy detail zones need to sit side by side with a clean, controlled result. Warning! Not suitable for children under 14 years.
TS spray colours
TS-38 Gun Metal Semi Gloss, spray paint, 100 ml
300085038€10.491 l = €104.90
TS-38 Gun Metal Semi Gloss is a 100 ml spray paint for model building, supplied in an aerosol can for direct application to plastic parts. The Gun Metal tone combines a metallic grey look with a semi gloss finish, making it useful for body sections, trim pieces and mechanical areas that benefit from a darker sprayed color with a subtle sheen. The TS paint format is suited to covering broader surfaces quickly, especially where curved shells, panel shapes or recessed details are harder to finish evenly with a brush. The aerosol spray lays down color across larger sections in one continuous pass, which helps keep the finish visually consistent on scale model components. For builds that call for more shine, the color coat can be followed with TS-13 glossy clear coat. This adds a glossier top layer while keeping the underlying TS-38 shade in place. On a car bodyshell, aircraft section or other plastic model assembly, the Gun Metal shade works well for contrast areas, technical details and darker accent zones. The 100 ml can size fits neatly into hobby bench use, whether the goal is a full exterior coat or selected sprayed sections that need a metallic grey finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-40 Metallic Black, spray paint, 100 ml
300085040€10.491 l = €104.90
TS-40 Metallic Black brings a dark metallic tone to plastic model surfaces with a semi gloss finish that gives panels and shaped parts a clean, light-catching look. The aerosol format lays colour across broad areas quickly, making it well suited to body shells, exterior panels and other model sections where an even coat matters. This spray paint comes in a 100 ml can and is part of the TS paint range for plastic models. The Metallic Black shade combines a black base with a metallic effect, which helps edges, curves and moulded lines stand out under changing light. On larger surfaces, the spray pattern supports more consistent coverage than hand brushing, especially where recessed contours or rounded forms make brush marks harder to avoid. The semi gloss surface sits between flat and high gloss, giving the finish visible depth without a mirror-like shine. When a brighter final sheen is required, TS-13 glossy clear coat can be applied over the colour layer. In model building sessions, this shade suits vehicle bodies, fairings and accessory parts that call for a darker metallic appearance. It also works well when a build needs contrast between painted exterior sections and smaller detail areas, while the can format keeps application straightforward across repeated coats. Warning! Not suitable for children under 14 years.
TS spray colours
TS-6 Flat Black, spray paint, 100 ml aerosol
300085006€10.491 l = €104.90
TS-6 Flat Black is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as a special acrylic resin spray. The flat black colour gives plastic model parts a non-gloss surface that suits body sections, panels and detail areas where a muted finish is the goal. The can is labelled for plastics, making it a clear fit for hobby work on compatible model surfaces. As an aerosol, it covers broad areas faster than hand painting and reaches curved shapes with an even mist when applied in controlled passes. The visible handling guidance points to a simple working method: shake the can vigorously, spray in light coats and allow drying between passes. Clearing the nozzle after use helps keep the spray pattern ready for the next session. The 100 ml fill offers enough paint for repeated workshop use across multiple stages of a build or refinishing job. On the bench, TS-6 Flat Black suits body preparation, colour blocking and final surface work on plastic model assemblies. It also fits touch-up tasks where a flat black section needs to match surrounding painted parts with the same low-sheen look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-95 Pure Metallic Red, paint spray, gloss 100 ml
300085095€11.491 l = €114.90
TS-95 Pure Metallic Red is a gloss spray paint for model finishing, supplied in a 100 ml aerosol can and formulated as a synthetic lacquer. The fast-curing formula suits larger model surfaces where an even metallic coat matters, such as car bodies, fairings and broad exterior panels that benefit from a smooth sprayed finish. The colour is identified as Pure Metallic Red, giving bodywork a bright metallic tone that catches light across curves, edges and recessed lines. Because the TS spray formula is not affected by acrylic or enamel paints, the main colour coat can be followed with hand-painted detail work in other paint types once the larger surfaces are covered. That makes it useful for separating the main body colour from smaller trim areas, vents, frames or accent sections without changing the base finish. The aerosol format also helps distribute paint evenly across wide sections that are harder to cover with a brush. On a workbench, one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear reference point for planning multi-body projects or repeat colour use on matching builds. The spray format suits full-body coating first, followed by detail painting once the main shell has cured, keeping the finishing process focused and orderly. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-1 Black Gloss, acrylic paint, 23 ml jar
300081001€5.491 l = €238.70
X-1 Black Gloss is an acrylic paint for plastic model building, supplied in a 23 ml jar for repeated bench use. The black gloss finish gives painted sections a dark, reflective surface that suits trim, panel areas and detail work where a clean, solid tone matters. The formula is described as a glossy brush paint and is intended for model-making applications rather than general craft use. On body shells, interior parts and small exterior details, the gloss surface changes how edges catch the light and helps separate black sections from neighbouring colours. The 23 ml volume supports more than a single pass, which is useful when a build needs a base coat, later corrections and matching touch-ups on added parts. As a liquid paint, it can be worked into narrow recesses, raised moulded details and small shaped areas that need controlled coverage. At the workbench, this colour fits projects that call for black trim, cockpit elements, mechanical details or contrast sections on plastic models. The jar format keeps the paint ready for return use across several stages of a build, from first colour application to later finishing work.
XY acrylic colours
X-26 Clear Orange Gloss, acrylic paint, 23 ml
300081026€5.491 l = €238.70
X-26 Clear Orange Gloss is an X-Acrylic resin paint for plastic model building, supplied in a 23 ml jar for brush-applied colour work on small parts and detailed assemblies. The clear orange tone lays a transparent gloss layer over the surface, so moulded detail and the base beneath can remain visible while the colour shifts toward a warm amber effect. That transparent character makes the paint especially useful on parts such as indicator lenses, signal covers and custom trim where solid colour would hide the shape. The gloss finish catches light across raised edges and curved surfaces, giving clear components a brighter, more defined appearance once dry. As part of the X-Acrylic range, it suits fine detail work where narrow borders, recessed sections and small matching parts need careful colour placement rather than broad coverage. The 23 ml volume also supports repeat use across several modelling sessions, whether the task is a single accent or a coordinated set of small painted sections. On a scale car, aircraft or display build, X-26 can be used to tint clear moulded parts, refresh coloured details or add contrast to selected features without covering every surrounding surface. It also fits bench work that calls for layered colour effects on compact components, where a transparent gloss tone changes the look while keeping the original form readable.
XY acrylic colours
X-32 Titanium Silver Gloss, acrylic paint, 10 ml
300081532€3.791 l = €379.00
X-32 Titanium Silver Gloss brings a bright metallic finish to plastic model work, with a 10 ml jar sized for detail painting, trim accents and smaller colour areas. The titanium silver shade gives panels, mechanical sections and highlighted edges a crisp reflective look that changes the character of a build with controlled brush-applied colour. This X-Acrylic paint is identified in the data as a gloss brush paint for plastic model building. The liquid formula has a silver colour and an alcohol odour, with a stated density of 1.0 g/ml at 23°C. The safety data lists a boiling range of 80 to 120°C, a flash point of 31 to 33°C and a solvent content of 50 to 60%. These technical details place it clearly in the finishing stage of model work, where a metallic tone is used to define separate parts, pick out moulded detail or sharpen visual contrast between neighbouring surfaces. On vehicle kits, the shade can be used for trim lines, mechanical housings or selected body details; on other plastic model subjects, it suits small components that need a clean metallic gloss. The compact jar format also works well when a project calls for one specific accent colour rather than broad coverage across large surfaces.
XY acrylic colours
XF-15 Flat Flesh, acrylic paint, 23 ml jar
300081315€5.491 l = €238.70
XF-15 Flat Flesh is an acrylic paint in a 23 ml jar, set up for controlled colour work on scale modelling projects where a flat skin-tone shade is needed. The clearly marked XF-15 designation helps identify the colour quickly on the bench, while the compact jar format suits repeated access during detail painting and small-area coverage. The Flat Flesh shade is suited to painted sections such as figures, interior details and other parts that call for a muted, non-gloss appearance. Acrylic paint supports careful application on fine surfaces where edges, recesses and small contours matter. The 23 ml content gives a practical amount for ongoing modelling work, whether the task is first-pass coverage, later corrections or matching previously painted sections. The label shown for XF-15 also carries hazard pictograms with a flame symbol and an exclamation mark for clear substance identification and handling awareness. On the workbench, this paint fits naturally into finishing stages that rely on precise shade choice rather than broad coverage. It can be kept alongside other coded colours for organised paint selection during figure painting, interior finishing and detail-focused touch-up sessions on scale builds.
XY acrylic colours
XF-24 Flat Dark Grey, acrylic paint, 23 ml
300081324€5.491 l = €238.70
XF-24 Flat Dark Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss surface appearance. The dark grey tone suits scale subjects that call for restrained colour, whether the aim is painted body sections, equipment housings or structural details with a muted finish. The acrylic formula supports careful application on smaller parts and defined areas where clean edges matter. Flat Dark Grey can be used to build tonal contrast against lighter greys, metallic shades or camouflage colours, and the 23 ml jar size keeps a usable amount ready for repeat sessions at the bench. The compact container stores easily with other hobby colours and keeps the shade clearly identifiable as XF-24 during paint selection. The label format also makes it straightforward to sort within an existing paint range by code and colour name. On a model bench, this shade fits naturally into projects with machinery, vehicles, diorama structures or weathered surface details. It also works for selective repainting, panel accents and finishing passes where a gloss effect would look out of place. Handle with care: the provided hazard information indicates flammable contents and warning classification.
XY acrylic colours
XF-3 Flat Yellow, acrylic paint, 10 ml
300081703€3.591 l = €359.00
XF-3 Flat Yellow brings a matte yellow tone to scale finishing work in a compact 10 ml jar. The acrylic formula suits controlled application on small sections, whether the task is picking out details, blocking in colour areas or refining a painted model with a clean flat surface. The XF designation identifies this shade within the Tamiya acrylic paint range, making it easier to place alongside other workshop colours during repeat builds and repair work. Flat Yellow can be used where a non-gloss appearance fits the subject better than a reflective coat, especially on utility markings, equipment details or custom colour layouts. The 10 ml content keeps the jar manageable on a crowded bench and helps portion paint for smaller sessions without opening a larger container. On the workbench, this shade fits touch-up jobs, detail painting and colour planning across model kits and accessories. It also works as a dedicated yellow kept ready for recurring tasks, such as small highlights, panel sections or repainting areas that need a consistent matte finish.
XY acrylic colours
XF-49 Flat Khaki, acrylic paint, 23 ml
300081349€5.491 l = €238.70
XF-49 Flat Khaki is an acrylic paint for scale model finishing, supplied in a 23 ml jar for controlled use on smaller sections, detail areas and colour matching across a build. The flat finish keeps the surface non-glossy, which suits subjects that call for a subdued, service-style appearance rather than a reflective coat. The khaki tone works well where muted earth and fabric-like colours are needed on model surfaces. It can be used to pick out equipment parts, interior sections, accessories and scenic elements that benefit from a restrained military-style shade. The jar format keeps the paint contained between sessions and supports measured use during step-by-step painting work. The XF-49 code also makes the colour easy to identify within an established paint range when a build calls for the same shade again. On the workbench, this paint fits neatly into careful finishing routines such as detail correction, panel colour separation and small repaint jobs after assembly. It also suits builders who keep a selection of specific tones ready for touch-ups, weathered accents and consistent colour planning across several model projects.
XY acrylic colours
XF-63 Flat German Grey, acrylic paint, 10 ml
300081763€3.591 l = €359.00
XF-63 Flat German Grey is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled colour application on scale builds. The flat grey tone gives painted areas a subdued surface appearance that suits subjects where a low-sheen finish is part of the visual character, from armour details to mechanical sections and weathered equipment. Within a paint rack, XF-63 works as a dedicated single shade rather than a mixed approximation, which helps keep repeat applications visually consistent across separate sessions. The acrylic formulation makes it a practical choice for small-area coverage, edge work and selective repainting where a defined grey is needed. The 10 ml content also fits neatly into hobby storage and keeps a frequently used neutral tone close at hand during ongoing build and finishing work. On the bench, this shade can be used when picking out panels, tools, fittings or other model details that call for a restrained grey rather than a reflective finish. It also suits correction work on earlier paint stages, where a compact jar and a clearly identified XF-63 label help speed up colour selection during focused modelling sessions.
XY acrylic colours
XF-78 Flat Wooden Deck Tan, acrylic paint, 10 ml
300081778€3.591 l = €359.00
XF-78 Flat Wooden Deck Tan brings a muted matt light brown tone to scale finishing work, with a 10 ml jar size that suits careful colour placement on deck sections, trim pieces and other small painted areas. The acrylic formula is presented as a liquid brush paint, giving model builders a controlled way to add a flat surface effect where a gloss sheen would look out of place. The shade is identified as Wooden Deck Tan and is described in the safety data as light brown with an alcohol odour. A flash point of 33°C and CLP hazard labelling for flammable liquid, eye irritation and inhalation risk make this a workshop material that calls for attentive handling and good ventilation during use. The density is listed at about 1.2 g/ml at 23°C, and the paint is supplied in the compact 10 ml format commonly used for precise colour selection across detailed model projects. On ship models, harbour scenes or weathered structural details, the flat finish helps timber tones read with a restrained, scale-appropriate look. The small jar size also suits touch-up work, selective repainting and keeping a specific deck colour ready for repeat use across ongoing builds.
Brushes and accessories
18 Well Brush Paint Palette, paint tray set
300087195€6.39
The 18 Well Brush Paint Palette set brings order to brush painting with 5 lightweight PET palettes shaped for controlled colour handling at the workbench. Each palette uses 18 hemispherical wells, and the 20 mm diameter with 8 mm maximum depth gives each paint portion a defined place while mixing and loading a brush. The 0.3 mm PET construction keeps the palettes light in hand, and each tray can be used as a full 18-well layout or cut with scissors or a hobby knife into smaller blocks when a more compact format suits the task. That flexibility helps when switching between broad colour sessions and focused detail work on smaller model sections. The ridges between wells create physical separation from one colour to the next, while the edge notches provide a clear resting point for the brush during pauses between strokes. A lip around the base improves stability on the bench and also gives a practical point for securing the tray with masking tape when a fixed painting setup is preferred. On a crowded hobby table, that combination supports cleaner handling of mixed paints, touch-up shades and repeated brush loads across longer painting sessions.
Diorama texture colours
Epoxy Putty Smooth Surface, modeling filler 25g
300087052€6.491 kg = €259.60
Epoxy Putty Smooth Surface is a 2-component modeling filler developed for clean surface work on scale builds, with a 25 g pack size that suits detail-focused bench tasks. The smooth-finish formula is aimed at reshaping parts, refining contours and building up areas that need a neat base before the next finishing step. Its stated uses cover re-modeling, detail fabrication, sculpturing, kit modifications and repairs, which makes it suitable for both corrective work and custom additions on model subjects. The compound can be applied where panel areas, edges or added forms need to be blended into surrounding surfaces with more control than a coarse filler allows. Separate wrapped bars indicate the two-part format used to prepare the material for application. This makes the putty relevant for filling damaged sections, forming small custom details and adjusting kit parts during conversion work. On the workbench, it fits tasks such as rebuilding a chipped corner, refining a hand-made detail or smoothing a modified section before further finishing. The compact 25 g quantity also suits targeted jobs where only a limited amount of material is needed rather than a large batch for broad coverage. Warning! Not suitable for children under 14 years.
Lacquer colours
Lacquer Thinner Retarder 250ml, paint thinner
300087194€14.991 l = €59.96
Lacquer Thinner Retarder 250ml is formulated for lacquer paint work where a slower drying pace helps the finish settle more cleanly. In airbrush use, the added retarder gives the thinned paint more open time, which is especially useful when overspray needs to be covered before it dries into the surface. The result is a smoother paint layer with a glossier look when the application calls for it. The thinner can be used with lacquer paints and spray paints, with a stated mixing ratio of 1:1 to 2:1 thinner to paint. That range allows the mix to be adjusted to the paint job and application method instead of forcing a single fixed setup. The 250 ml bottle provides a practical volume for repeated bench use across multiple painting sessions. Where humidity can interfere with the finish, the retarder helps avoid blushing, the foggy white effect caused when moisture becomes trapped in the paint film. On the workbench, this makes a clear difference during body painting, touch-up passes and other stages where a wet edge matters. It suits model finishing tasks that call for a smoother lacquer surface, more control during spraying and cleaner results when conditions are less than dry.
Lacquer colours
LP-2 White Gloss, lacquer paint, 10 ml jar
300082102€3.491 l = €349.00
LP-2 White Gloss is a lacquer paint for scale model finishing, supplied in a 10 ml jar and identified within the LP paint range by the LP-2 designation. The white gloss shade gives painted sections a bright, solid look that stands out clearly on bodywork, trim and small details. The lacquer formula makes this paint a focused choice for model building and finishing work where a specific colour reference matters. The compact 10 ml size keeps the jar easy to store on a workbench and practical to reach for during detail passes, correction work or planned colour matching within the same build. The clearly marked LP-2 code also helps keep paint selection consistent when several shades are used across one project. Where a model calls for white body sections, accent areas or sharply defined contrast, this gloss shade supports a clean visual result. On the bench, the jar format suits careful brush application to smaller parts and controlled use on selected sections that need a bright gloss white. It also fits neatly into a paint lineup for ongoing model projects, touch-up work and repeat finishing sessions where the same colour needs to be identified again quickly.
Polish, cleaners, aging materials
Polishing Compound Coarse, model finishing paste
300087068€6.691 l = €304.09
Polishing Compound Coarse is a model finishing paste for the first stage of surface correction, supplied in a 22 ml tube for controlled hobby-bench use. The coarse grade is suited to smoothing visible marks, refining painted areas and preparing model surfaces for later treatment with finer compounds when a more polished finish is required. The compound is a white, pasty emulsion formulated for model making, giving close control when worked onto selected sections rather than flooding a whole surface. This makes it useful on body shells, painted panels and other detailed parts where local correction matters. The packshot and product marking identify this as the coarse version within a multi-step compound range, placing it at the stronger cutting stage before fine and finish grades. The safety data identifies the mixture as partially emulsifiable in water, with a pH value of 9.5 at 25 °C and a relative density of 1.2 at 20 °C. On the workbench, a small amount can be applied to areas that need stronger polishing before the next finishing step. Use in well-ventilated areas and handle with care, as the hazard information states that the compound can cause allergic skin reactions and repeated contact may lead to dry or cracked skin. Warning! Not suitable for children under 14 years.
PS spray colours
PS-23 Gun Metal Grey, spray paint, 100 ml
300086023€10.991 l = €109.90
PS-23 Gun Metal Grey brings a dark metallic tone to polycarbonate model surfaces in a 100 ml spray can, giving RC bodyshell projects a finish that reads clean and mechanical under workshop light. The aerosol format suits broad shell panels and curved sections where an even colour layer matters across the full shape. This paint is specified for polycarbonate, so it matches the material used on many RC car bodies rather than serving as a general craft coating. The Gun Metal Grey shade sits in the technical, motorsport end of a colour scheme and works well for single-colour shells, layered race liveries or darker accent sections. Direct spray application helps cover rooflines, arches and side panels with a continuous coat that would be harder to achieve with a brush. The can format also keeps the paint ready for quick colour sessions on fresh bodyshell projects or repaint work. On the bench, PS-23 fits the stage where a clear shell moves into its final visual identity through colour and finish. It suits hobby painting sessions focused on RC car bodies, custom body panels and replacement shells that need a polycarbonate-specific coating in a compact 100 ml size. Warning! Not suitable for children under 14 years.
TS spray colours
TS-33 Flat Hull-Red, spray paint, 100 ml
300085033€10.491 l = €104.90
TS-33 Flat Hull-Red is a 100 ml spray paint for plastic model parts, built around a special acrylic resin formula and delivered through an aerosol can for broad, even coverage. The flat color finish suits subjects that call for a muted surface rather than shine, whether the goal is a ship hull tone, structural detailing or a weathered painted section on a scale build. The aerosol format helps lay color across larger panels and shaped parts with a steady spray pattern, which is useful on curved shells, molded recesses and edges that are slower to cover by hand. The can is labeled for plastics, making it a focused choice for model kit finishing rather than a general household coating. The TS-33 designation also helps match the shade within an established hobby paint range when a build calls for a specific color reference. As an aerosol paint, the can is classified as extremely flammable and pressurized, and it should be used only with careful handling and good ventilation. On the bench, this spray suits primed assemblies, separate body sections and detail groups that need an even flat red-brown tone across multiple parts. It also works well when a build calls for quick, consistent color application before further detailing, masking or weathering steps are added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-34 Camel Yellow Gloss, spray paint, 100 ml
300085034€10.491 l = €104.90
TS-34 Camel Yellow Gloss is a 100 ml aerosol spray paint for plastic models, built for fast, even colour application on larger surfaces and shaped parts. The gloss yellow shade gives body panels, fairings and exterior sections a bright, solid finish that reads cleanly on display models and working RC builds alike. This TS paint is described as a special acrylic resin spray, combining pigments, binders and solvents in a pressurised can for direct spray use. The can is intended for plastic model work, where broad coverage matters more than brush marks or uneven edges. Applied in light coats from about 25 to 30 cm, the spray pattern helps colour reach curves, corners and recessed sections with a more consistent layer build. The 100 ml fill suits full-body coverage as well as smaller repaint jobs and matching detail sections across a build. On the bench, TS-34 Camel Yellow Gloss fits projects that need a strong yellow body colour, a contrasting accent area or a fresh repaint on worn exterior parts. It works well when several plastic components need the same tone across the whole model, keeping the finish visually coherent from the first pass to the final dried coat. Warning! Not suitable for children under 14 years.
TS spray colours
TS-50 Mica Blue Spray Paint, model paint, 100 ml
300085050€10.491 l = €104.90
TS-50 Mica Blue Spray Paint brings a metallic blue tone to model work in a 100 ml aerosol can, combining quick coverage with a semi gloss finish that suits broad body panels and shaped parts. The spray format helps distribute colour in a fine mist, making it easier to cover contours, edges and recessed sections with a more uniform coat than hand brushing. The paint is specified for plastics, which makes it relevant for many model shells and accessory parts used in hobby building. The mica effect gives the blue shade extra visual depth as light moves across the painted surface, so curved fenders, rooflines and body sides show more variation than a flat solid colour. The can label identifies it as a spray paint for adult modelers only, and the aerosol format is paired with handling guidance such as vigorous shaking and application in light coats. The 100 ml fill size also gives enough material for repeated passes across larger sections where a single heavy coat would be less controlled. For finishing work, TS-13 glossy clear coat can be used over TS-50 when a higher-shine result is wanted. That makes the paint useful for model car bodies, exterior panels and other plastic parts where colour consistency and surface character matter in the final presentation. In a workshop setup, the can suits staged painting sessions with drying time between coats and a final clear layer when a brighter gloss is the goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-61 NATO Green Flat, spray paint, 100 ml
300085061€10.491 l = €104.90
TS-61 NATO Green Flat is a 100 ml spray paint for model finishing, supplied in a ready-to-use aerosol can for broad, even coverage on plastic parts. The flat NATO Green tone gives military subjects and other subdued paint schemes a matte surface that reduces visible brush streaks and helps large areas read as one consistent color. This TS paint belongs to the special acrylic resin spray range for model use. The aerosol format is especially useful on body shells, hull sections, armor panels and other shaped components where a brush can leave overlaps at edges and corners. A sprayed coat can settle more evenly across recessed lines, raised details and curved surfaces, which helps preserve the look of molded structure after painting. The 100 ml volume also gives enough material for repeated finishing sessions or for covering multiple assemblies, depending on the size of the parts being painted. On the workbench, the can suits builders who want a fast route to a uniform base color before adding markings, weathering or detail accents. It also fits restoration or touch-up work on existing model projects where a flat military green shade needs to match the rest of the finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-86 Brilliant Red, paint spray, 100 ml
300085086€11.491 l = €114.90
TS-86 Brilliant Red is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover larger surfaces with an even colour coat. The bright red shade suits full body shells, broad panels and other parts where a smooth, continuous finish gives the model a clean overall look. The aerosol format is especially useful when a brush would slow down coverage across wide sections. One can contains enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a clear guide for planning a complete paint job. After the main coat has been applied, enamel and acrylic paints can be used for smaller details and picked-out sections because the spray layer is not affected by those paint types. That makes it easier to separate the main body colour from trim lines, lights, frames or other fine accents added later. On the bench, TS-86 Brilliant Red supports a straightforward workflow: broad areas first, then detail painting once the main surface has cured. It fits model projects that need a strong solid red finish across exterior shells, whether the goal is a clean road-car look or a vivid racing style.
Polish, cleaners, aging materials
Weathering Master C, weathering set for model kits
300087085€13.291 kg = €1,582.14
Weathering Master C brings 4 focused finish tones into one model-making set for adding worn metal and rust effects to static builds. Rust, Orange Rust, Gun Metal and Silver sit side by side in a compact case, making it easy to move between oxidised surfaces, dark metallic shading and bright edge accents while working across armour, vehicles or scenic details. The dry weathering format is intended for representing ageing and use in model building rather than broad paint coverage. An applicator and brush are included for controlled pickup and placement, so small areas such as corners, seams, exhaust surrounds or tool marks can be treated with more precision. Gun Metal and Silver help pick out exposed edges and rubbed contact points, while the 2 rust shades support layered corrosion effects from darker staining to fresher orange deposits. The grouped layout also helps keep colour choices consistent when returning to the same build over several sessions. On a tank hull, the tones can be worked into hatches, bolts and track guards; on a car or aircraft, they can define panel wear, heat-marked metal and chipped sections. The set also suits diorama surfaces where machinery, barriers or industrial details benefit from restrained metallic contrast and weathered colour variation. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-24 Clear Yellow Gloss, acrylic paint, 23 ml
300081024€5.491 l = €238.70
X-24 Clear Yellow Gloss brings transparent yellow tone and a glossy finish to plastic model painting in a 23 ml jar. The clear formula is suited to effects where the underlying surface still needs to show through, such as tinted lights, coloured windows or layered accents on bodywork and detail parts. Within the X-Acrylic range, this shade serves as a specific colour reference for repeatable model finishing. The safety data identifies the paint as a liquid mixture with binders, pigments and solvents, and lists a density of 1.0 g/ml at 23 °C. It also states a flash point of 31 to 33 °C and a boiling range of 80 to 120 °C, which is relevant for careful handling during painting sessions. The same document names the use as paint for plastic model building and notes partial water solubility of the solvents. On the workbench, X-24 can be used for selective brush application on small parts or for controlled colour effects where a solid coat would cover too much detail. The 23 ml volume supports repeated use across several model stages, from first colour tests to later corrections on matching sections.
XY acrylic colours
X-25 Clear Green Gloss, acrylic paint, 23 ml
300081025€5.491 l = €238.70
X-25 Clear Green Gloss brings a transparent green tone and a glossy finish to plastic model building, giving clear parts, accents and custom sections a coloured surface that still shows the shape beneath. The 23 ml jar suits bench work that calls for measured application, whether the goal is a light tint on a canopy insert or a deeper layered effect on selected details. As part of the X-Acrylic paint range, this colour is supplied as a liquid brush paint for model use. The clear formulation changes the appearance of the underlying surface rather than covering it like an opaque coat, which makes it useful for lenses, windows, signal parts and other areas where molded detail should remain visible. The gloss finish adds a reflective look that suits polished body accents and transparent effects. The safety data identifies the mixture as flammable liquid category 3 with a flash point of 31 to 33 °C. On the workbench, the jar format supports careful loading of a brush for edges, inserts and small parts. It also fits projects that use several thin coats to build colour gradually across clear components or decorative sections on a scale model.
XY acrylic colours
X-31 Titanium Gold Gloss, acrylic paint, 10 ml
300081531€3.791 l = €379.00
X-31 Titanium Gold Gloss brings a metallic gold tone and a glossy finish to plastic model painting, giving trim, mechanical accents and highlighted sections a brighter visual break across the build. The 10 ml format keeps the paint compact on the workbench and easy to reach for repeat detail work on smaller areas. This X-Acrylic resin paint is identified in the data as a brush paint for plastic model building, so it fits tasks where controlled hand application matters more than broad coverage. The liquid paint has a golden color, an alcohol odor and a density of 1 g/ml at 23°C. The safety data lists a flash point of 31-33°C and a boiling range of 80-120°C. For handling, the data states use in well-ventilated areas and storage in a tightly closed container away from heat. On the bench, the shade works well for picking out molded details, refreshing worn color sections or adding contrast to body parts and accessories on plastic model kits. A small jar size also makes it practical to keep several specific tones close at hand during painting sessions where separate metallic accents are planned across different assemblies.
XY acrylic colours
X-6 Orange Gloss, acrylic paint, 23 ml jar
300081006€5.491 l = €238.70
X-6 Orange Gloss is an acrylic paint for plastic model building, supplied in a 23 ml jar for brush-applied colour work on parts, panels and smaller surface sections. The glossy orange tone gives custom builds, trim areas and visual accents a vivid finish that reads clearly once dry. Within the X-Acrylic range, the X-6 code helps keep colour planning consistent across repeat projects, touch-up work and established paint lists. The paint is described in the safety data as a mixture of binders, pigments and solvents, with a liquid form and a density of 1.0 g/ml at 23 °C. The same document identifies a flash point of 31 to 33 °C and notes use in well-ventilated spaces, which matters when setting up a painting bench for careful detail work. On smaller model parts, a 23 ml jar supports repeated brush loading without moving to a larger container. This format suits bench painting sessions focused on cockpit parts, trim lines, body details or small exterior sections where a gloss colour is meant to stand out. It also fits planned repainting and repair work, where a clearly coded orange shade can be kept on hand for later corrections or matching sections.
XY acrylic colours
XF-52 Flat Earth, acrylic paint, 23 ml
300081352€5.491 l = €238.70
XF-52 Flat Earth is an acrylic paint in a 23 ml jar, set up for detailed finishing work where a matte brown tone is needed on scale builds and scenic elements. The compact jar format keeps the colour ready for repeated use at the bench, whether the task is covering a small panel, refining an edge or adding earth-toned variation to a surface. The Flat Earth shade suits groundwork, military subjects and weathered details where a muted brown reads more naturally than a glossy finish. Within the XF range, the XF-52 designation makes the colour easy to identify during paint planning and repeat use across ongoing projects. The acrylic format supports controlled application on smaller areas and detail sections that call for careful placement rather than broad coverage. The 23 ml content also gives enough volume for repeated touch-ups, layered effects and consistent colour matching across separate sessions. On a diorama base, XF-52 can define soil sections, dusty textures and worn edges. On vehicle or accessory parts, the same tone can be used to break up uniform surfaces and add a more worked, field-used appearance. The jar size stores neatly with other modelling supplies and keeps this specific brown close at hand for regular finishing tasks.
XY acrylic colours
XF-55 Flat Deck Tan, acrylic paint, 23 ml
300081355€5.491 l = €238.70
XF-55 Flat Deck Tan is an acrylic paint supplied in a 23 ml jar for model finishing, detail work and colour matching on scale builds. The shade is listed as Flat Deck Tan and identified in the source data as Light Brown, giving builders a defined reference when a project calls for a restrained tan tone rather than a stronger brown or beige. The acrylic formula makes this paint relevant for controlled bench work where smaller parts, edges and surface sections need careful coverage. A 23 ml volume gives enough material for repeated use across touch-ups, follow-up coats and matching areas on the same build. The XF designation also helps keep the colour easy to identify within a wider paint collection when several tones are in use during one project. On the workbench, XF-55 fits naturally into painting stages such as base coating selected sections, refining smaller details or returning later for corrections after assembly and handling. The clearly named shade and measured jar size make it straightforward to keep colour use consistent across separate sessions on the same model.
XY acrylic colours
XF-59 Flat Desert Yellow, acrylic paint, 23 ml
300081359€5.491 l = €238.70
XF-59 Flat Desert Yellow is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, muted desert shade. The matte character keeps the colour restrained on military subjects, field equipment and scenery sections, where a dry surface look suits sand, dust and sun-faded tones. The acrylic formula suits careful colour placement on smaller model parts and shaped surfaces where controlled application matters. XF-59 can be used to establish a base desert tone, refine panel sections or bring separate assemblies into the same colour family during painting work. The flat finish also supports weathered visual effects, because the subdued surface avoids the reflective look that can distract from camouflage schemes and service-worn details. On diorama elements, the beige-brown tone works well for arid ground sections, crates, barriers and other terrain accents that need a dusty appearance. At the workbench, the 23 ml jar is easy to keep alongside other finishing supplies for repeat use across several painting stages. It fits naturally into projects that move between body sections, accessories and scenic details, especially when one consistent desert shade is needed across the whole model.
XY acrylic colours
XF-9 Hull Red, acrylic paint, 23 ml jar
300081309€5.491 l = €238.70
XF-9 Hull Red is an acrylic paint for scale modelling work, supplied in a 23 ml jar that fits neatly into bench setups where colour, touch-up and detail stages happen side by side. The Hull Red shade brings a dark red-brown tone that suits subjects needing a muted, worked finish rather than a bright primary colour. Within a paint rack or active build area, the screw-top jar keeps the contents contained between sessions and makes it easy to return to the same shade across separate stages of a project. The acrylic paint format supports controlled application on smaller sections where edges, recesses and defined colour zones need attention. The XF designation also helps identify the shade quickly among other modelling colours when several finishes are in use on the same build. On military subjects, ship sections, underbodies or weathered structural details, XF-9 Hull Red can be used where a darker earthy red is needed to shape contrast and depth. It also suits touch-up work and selective repainting on existing models when a full recolour is not required. Handle with care: the supplied hazard information indicates flammable content and a caution warning for use during painting and storage.
Lacquer colours
LP-23 Clear Flat, model paint, 10 ml bottle
300082123€3.491 l = €349.00
LP-23 Clear Flat is a 10 ml model paint for finishing work that calls for a clear, low-sheen surface. The bottle size suits controlled use at the bench, whether the task is a small touch-up, a sealing pass over markings, or a final coat on selected body sections. The clear flat finish is intended to change surface appearance rather than cover it with a solid colour, which makes it useful where painted details still need to remain visible. On scale builds, this type of coat can be applied over completed paintwork to give panels, accessories or other sections a more subdued look. The compact bottle is easy to place alongside other finishing supplies and supports measured dispensing for smaller jobs. The product data identifies this paint as part of the LP-Paint range and names the shade as LP-23 Clear flat. At the workbench, LP-23 Clear Flat fits into the final stages of a model project, when the painted surface, markings and fine details are already in place. It also suits later maintenance on display pieces or running models where a local area needs the same flat clear treatment as the surrounding finish.
TS spray colours
TS-21 Gold Gloss, spray paint, 100 ml aerosol
300085021€10.491 l = €104.90
TS-21 Gold Gloss is a 100 ml spray paint aerosol for model finishing, supplied in a ready-to-use can that applies colour by fine spray across plastic parts. The gloss gold tone suits builds that need a bright metallic surface, whether the aim is a full body colour, accent sections or selected trim areas that stand out under a clear, reflective finish. The paint is identified as a special acrylic resin spray within the TS range, giving model makers a clearly coded colour reference for repeat use on matching parts or later touch-ups. The aerosol format helps cover broad shells, panels and exterior sections more quickly than brush application, especially where an even coat matters across curved surfaces. The can is marked for plastics, which keeps material choice clear when planning a finishing sequence for model kits and separate body components. Visible hazard labelling and handling information on the can underline that this is a workshop material intended for careful hobby use. On the bench, TS-21 fits naturally into painting sessions for scale bodies, accessories and detail sections that call for a metallic gold effect. It works well when a build moves from surface preparation to colour coating, with the 100 ml can size offering enough paint for repeated passes on larger model parts or several smaller sections. Warning! Not suitable for children under 14 years.
TS spray colours
TS-4 German-Grey Flat, spray paint, 100 ml
300085004€10.491 l = €104.90
TS-4 German-Grey Flat is a 100 ml spray paint from the TS range, made for plastic model finishing with a muted grey tone and an even aerosol application. The flat surface works especially well where a low-sheen look suits the subject, from military equipment to mechanical details and scale body sections. The paint is identified in the range as TS-4 and belongs to the Spezial-Acryl-Harz-Spray line. Its aerosol can format is designed for broad, consistent coverage on exterior surfaces, making it useful for body panels, housings and shaped parts that benefit from a uniform coat. The 100 ml fill gives enough material for repeated light passes across larger areas while keeping the colour tone consistent from section to section. The German-Grey shade lends itself to subdued finishes, technical components and painted assemblies where a glossy effect would not match the intended look. On the workbench, the spray format helps move quickly from prepared parts to full-colour coverage on plastic assemblies and accessories. It fits painting sessions focused on shells, structural sections or detail groups that need the same flat grey across multiple pieces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-45 Pearl White Gloss, spray paint, 100 ml
300085045€10.491 l = €104.90
TS-45 Pearl White Gloss is a 100 ml TS paint spray made for finishing plastic model surfaces with a bright gloss coat and a pearl effect that catches light across curves, edges and larger exterior sections. The aerosol format suits broad coverage on body shells and other outer parts where an even colour layer matters to the final look. This paint belongs to the TS spray range and is identified as a special acrylic resin spray in the supplied safety data. The can is intended for model painting rather than general household use, and the label states for adult modelers only. Pearl white works especially well on shaped panels where the finish can show subtle changes in tone as light moves across the surface. For the stated colour result, Tamiya recommends using TS-26 Glossy White as the primer beneath TS-45, giving the top coat a lighter base to build on. On the bench, TS-45 suits car bodies, cowlings and other plastic parts that benefit from a smooth sprayed finish instead of hand-painted coverage. Light coats on prepared surfaces help build the final appearance step by step, whether the goal is a clean road-car body, a race livery base or a bright custom colour scheme. Warning! Not suitable for children under 14 years.
TS spray colours
TS-63 NATO Black Flat, spray paint, 100 ml
300085063€10.491 l = €104.90
TS-63 NATO Black Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can and identified as part of the TS paint range. The flat black tone suits subdued colour layouts, dark trim sections and military-style paint schemes where a non-gloss surface is needed across larger areas. The formula is described in the product data as a special acrylic resin spray with pigments and solvents in a pressurised can. That aerosol delivery helps lay colour across wide panels, body sections and separate parts with a more uniform coat than hand brushing on the same surfaces. The can is intended for plastics, making it suitable for plastic model components where an even overall colour is the goal. The 100 ml fill offers enough paint for repeated passes on multipart builds, touch-up work on matching sections, or a full colour stage within a larger finishing plan. On the bench, TS-63 can be used for exterior body pieces, armour panels, accessories and other model parts that call for a flat black accent or base tone. It fits builders planning camouflage layouts, dark underlayers or restrained contrast details, and the spray format keeps the painting step focused on coverage, tone consistency and a clean matte look. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-5 Green Gloss, acrylic paint, 10 ml jar
300081505€3.591 l = €359.00
X-5 Green Gloss is an acrylic paint for plastic model building that brings a strong green tone and a glossy surface into finishing work. The 10 ml jar suits focused paint sessions where small parts, trim sections or selected body areas need clean colour with a reflective look. This paint belongs to the X-Acrylic range and is identified as X-5 Green Gloss in the colour system, which helps keep repeat builds and touch-up work consistent across separate stages of a project. The basic use stated for this paint is plastic model building, making it a direct fit for body shells, cockpit details and other model components that need brush-applied colour. The glossy character changes how edges and contours read under light, so panel lines, raised moulding and accent sections stand out more clearly after painting. A compact 10 ml volume also makes it easy to keep several shades on hand for multi-colour finishing plans without taking much bench space. On the workbench, the jar size suits careful colour placement during detail painting, whether the focus is a single trim line or a set of smaller parts. It also works well when a build needs one defined green shade repeated across separate assemblies to keep the finished model visually consistent.
XY acrylic colours
XF-20 Flat Medium Grey, acrylic paint, 23 ml
300081320€5.491 l = €238.70
XF-20 Flat Medium Grey brings a neutral matt grey tone to scale painting work in a 23 ml jar, with an acrylic formulation suited to controlled application on model parts and surface details. The shade sits well on mechanical sections, interior areas and exterior elements where a restrained grey finish supports realistic colour balance. The Flat Medium Grey tone works especially well when a build needs separation between panels, equipment housings or structural details without the stronger contrast of darker greys. In a painting setup, the 23 ml content gives enough material for repeated detail work, small-area coverage and follow-up correction during longer finishing sessions. The acrylic paint format also fits workflows that move between base coating, layered colour work and precise edge refinement on individual components. On the bench, XF-20 can be used for cockpit sections, equipment casings, armour details or neutral trim where a matt grey surface helps define shape without drawing focus away from surrounding markings and colours. During final finishing, the same shade supports touch-ups and visual consistency across separate parts that need to read as one complete model.
XY acrylic colours
XF-54 Flat Dark Sea Grey, acrylic paint, 23 ml
300081354€5.491 l = €238.70
XF-54 Flat Dark Sea Grey is an acrylic brush paint in a 23 ml jar, supplied as a liquid colour for scale modelling work where a muted, flat finish suits military subjects, ship details and equipment tones. The dark sea grey shade gives surfaces a restrained look that sits well on panels, accessories and smaller painted sections. The paint is identified as XF-54 and described as Flat Dark Sea Grey, making it easy to match with build notes, colour callouts and repeat applications across ongoing projects. Its liquid form supports careful brushwork on edges, recessed areas and small components where controlled placement matters more than broad coverage. The finish is matt rather than glossy, so painted areas read with less shine under display lighting and photography. The jar format keeps the colour ready for bench use between painting stages. The stated content is 23 ml. On the workbench, this shade suits touch-ups, detail painting and colour blocking on model parts that need a subdued grey tone. For handling, the safety data states that the liquid and vapour are flammable and that use in well-ventilated areas is required.
XY acrylic colours
XF-59 Flat Desert Yellow, acrylic paint, 10 ml
300081759€3.591 l = €359.00
XF-59 Flat Desert Yellow brings a muted flat tone to scale painting work, with a 10 ml jar size that suits detail-focused sessions at the bench. The acrylic formula gives model builders a practical colour option for smaller painted sections, touch-ups and carefully controlled coverage where a matte desert shade fits the subject. The Flat Desert Yellow tone works well for arid vehicle schemes, dust-toned equipment finishes and terrain details that call for a subdued sandy colour rather than a glossy surface. In a colour range marked by the XF designation, this shade sits naturally among flat finishing paints used to build layered surface variation across military subjects, accessories and scenic elements. The compact 10 ml volume also makes it easy to add a specific reference colour to an existing paint rack without taking much space. On the workbench, this paint suits focused jobs such as picking out smaller components, refining edges or adjusting colour balance on a larger build. It also fits builders who plan colour layouts in advance and want a clearly identified reference, with XF-59 and Flat Desert Yellow stated directly on the jar.
XY acrylic colours
XF-60 Flat Dark Yellow, acrylic paint, 10 ml
300081760€3.591 l = €359.00
XF-60 Flat Dark Yellow brings a muted, matte colour tone to model finishing in a compact 10 ml jar. The acrylic paint format suits careful application on smaller sections, where controlled coverage and clean colour placement matter during detailing, touch-ups or staged paintwork on scale subjects. The Flat Dark Yellow shade works especially well where a non-gloss surface is needed, giving panels, equipment sections or accent areas a restrained look rather than a reflective finish. In a paint range, XF-60 also serves as a clearly identified reference for repeat use across matching builds or later corrections. The 10 ml volume keeps the jar easy to store alongside other hobby colours and straightforward to add into a planned paint set for ongoing bench work. On the work surface, this paint fits naturally into finishing sessions that move between base coating, small corrections and colour blocking on individual parts. The compact jar size also makes it practical for keeping specific tones ready for follow-up work when an earlier model needs a precise colour match or a fresh matte layer.
XY acrylic colours
XF-65 Flat Field Grey, acrylic paint, 23 ml
300081365€5.491 l = €238.70
XF-65 Flat Field Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the exact XF-65 shade code. The flat grey tone gives scale builds a subdued, non-gloss colour layer that suits military subjects, equipment details and carefully matched retouching on painted sections. The acrylic formula is suited to controlled brush application on smaller parts, edges and surface details where a clearly defined colour matters. The 23 ml volume keeps the jar practical for repeated workshop use while remaining easy to store alongside other coded shades in a paint rack or tool drawer. The exact Flat Field Grey designation also helps when a build calls for a specific colour reference rather than a general grey. Hazard labelling with flame and exclamation symbols indicates that the paint should be handled with appropriate care. On the bench, XF-65 can be used during main colour application, for detail passes on accessories and panels, or later in the build when small corrections are needed to keep tones consistent. The jar format also makes it easy to reopen the same shade for follow-up work on matching parts in future projects.
Primers
Metal Primer Clear 100ml, model paint primer
300087061€11.391 l = €113.90
Metal Primer Clear 100ml is a spray undercoat for metal parts used in model making and finishing work. The clear formula prepares bare metal surfaces before painting, helping later coats settle on a properly primed base while keeping fine shapes and mechanical detail visible. The can is intended for undercoating metal components such as photo-etched parts, die-cast sections, brackets and similar modelling pieces where paint adhesion needs extra support. Applied as a preparatory layer, it gives colour coats a more dependable surface than untreated metal alone. The spray delivery also helps reach corners, edges and recessed areas on irregular parts, which is useful when working with small fittings or shaped components. With 100 ml in the can, the primer fits regular bench use for multiple painting sessions and detail jobs. In a modelling workspace, it slots in before the main paint stage: metal parts are primed first, then finished in the chosen colour once the surface is ready. It also suits mixed-material builds where selected metal details need their own undercoat before final assembly or display finishing.
Polish, cleaners, aging materials
Polishing Compound Sponges, model finishing set
300087192€6.49
Polishing Compound Sponges bring controlled finishing to painted model surfaces with 3 sizes that suit different sections of the body. The small, medium and large sponge shapes help place polishing compound accurately on broad areas, narrow borders and tighter corners, so paint correction stays focused instead of spreading across nearby detail. Each sponge combines a working face with an integrated grip section that makes handling more stable during careful finishing passes. Compared with a cloth, the sponge format gives more exact contact on edges and around colour boundaries, which helps avoid rubbing away paint from raised corners or mixing colours at borders. The set contains 1 small sponge, 1 medium sponge and 1 large sponge, giving a clear size choice for different stages of surface work. On the workbench, the sponges suit final paint-job refinement after curing, touch-up polishing on local marks, or careful compound application around panel lines and trim edges. After use, the sponges can be washed and reused, ready for the next model finishing session with the same controlled feel.
PS spray colours
PS-12 Silver, polycarbonate spray paint, 100 ml
300086012€10.991 l = €109.90
PS-12 Silver brings a metallic silver finish to polycarbonate model bodies in a 100 ml aerosol can, giving RC shell projects a colour option matched to this specific surface type. The spray format supports direct application to clear body panels, where an even coat and consistent coverage matter across curved fenders, roofs and side sections. The can is identified as Tamiya Color for polycarbonate, with PS-12 marking the exact shade reference for repeat purchases and matching across multiple builds. This is a spray paint for model use rather than a general craft coating, so the formula is positioned around polycarbonate shell work in the modelling bench setup. The silver tone suits race-inspired liveries, single-colour finishes and layered custom schemes where metallic brightness is part of the visual effect. The 100 ml net volume gives a clear quantity reference when planning one shell or several smaller paint jobs. On the bench, PS-12 Silver fits the stage where a clear body takes on its final character through colour, whether the goal is a clean competition look or a reflective custom finish. It can be kept alongside other model finishing supplies as a dedicated polycarbonate spray option for repeat RC body projects. Warning! Not suitable for children under 14 years.
PS spray colours
PS-34 Bright Red, polycarbonate spray paint
300086034€10.991 l = €109.90
PS-34 Bright Red brings a bold colour finish to polycarbonate model bodies, with a spray format that suits broad side panels, curved roof sections and detailed body contours. The 100 ml can gives hobby paint work a compact format that stores easily on the bench while keeping a clearly identified shade under the red cap. The can is labelled for polycarbonate, which matters when a bodyshell calls for a paint type matched to that material rather than a general craft coating. Bright Red suits racing-inspired colour layouts, single-colour shells and touch-up work on existing model bodies where a vivid solid tone is needed. The aerosol format helps lay colour across larger sections without brush marks, while still reaching recessed lines and tighter corners around body shapes. Made in Japan, PS-34 sits within Tamiya's PS paint range for model finishing tasks tied to polycarbonate parts. On an RC workbench, the can fits naturally into body preparation and finishing sessions where colour choice, material match and clean coverage all matter. It also works well as a shelf-ready refill shade for hobby spaces that keep frequently used body colours close at hand. Warning! Not suitable for children under 14 years.
TS spray colours
TS-27 Flat White, spray paint, 100 ml aerosol
300085027€10.491 l = €104.90
TS-27 Flat White is a 100 ml spray paint designed for model finishing, combining a flat white tone with aerosol application for broad, even coverage on plastic surfaces. The special acrylic resin formula is made for hobby use, where smooth colour laydown across shaped parts, larger panels and curved sections helps keep the finish consistent. The can delivers paint as a fine spray rather than a brush-applied coat, which makes it useful for covering shells, body parts and other model components with fewer visible stroke marks. The Flat White shade works well where a matte white surface is needed for clean colour separation, solid coverage or a neutral base before further detailing. As an aerosol paint, it is classified as extremely flammable and as a pressurised container. Use only outdoors or in well-ventilated areas, avoid inhaling spray mist, and protect the can from heat and direct sunlight above 50°C. On the workbench, TS-27 suits builders finishing scale models, refreshing painted sections or preparing parts for additional masking and colour work. The 100 ml fill gives a practical amount for repeated hobby use across multiple painting sessions. Warning! Not suitable for children under 14 years.
TS spray colours
TS-42 Light Gun Metal, spray paint, semi gloss
300085042€10.491 l = €104.90
TS-42 Light Gun Metal is a special acrylic resin spray paint for model finishing, supplied in a 100 ml aerosol can. The semi gloss Light Gun Metal shade gives plastic model surfaces a metallic look with a controlled sheen that avoids the fully flat or mirror-gloss appearance often used for different effects. The aerosol format helps lay down colour across wider panels and shaped exterior sections in a continuous coat, which is useful on body shells, fairings, covers and other visible parts where an even surface matters. As part of the TS paint range, this shade is suited to model painting tasks that call for a darker metallic tone. The can is labelled for plastics, aligning it with common model-building materials used in hobby kits. When a brighter top finish is wanted, the BasicText specifies TS-13 glossy clear coat as the matching overcoat for a glossy surface finish. On the bench, TS-42 fits projects where metallic bodywork, trim sections or equipment housings need a darker gun metal appearance. It also works well in finishing stages where a spray-applied coat is preferred over brush application for smoother coverage across larger visible areas. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-13 Metallic Blue Gloss, acrylic paint, 10 ml
300081513€3.591 l = €359.00
X-13 Metallic Blue Gloss brings a bright metallic blue tone to plastic model building, with a gloss finish that catches light across curved panels, trim pieces and small accent parts. The 10 ml jar size suits careful, measured paint use on projects where colour placement and surface effect need close control. As part of the X-Acrylic paint range, this colour is identified as X-13 and is intended for plastic model work. The paint is supplied as a liquid and the safety data identifies it as a glossy special acrylic resin paint mixture with pigments, binders and solvents. That composition supports even coverage on small model sections and makes the shade useful for selective painting rather than broad-area coating. The metallic effect gives flat moulded parts a more finished appearance once colour is applied, especially where edges, contours and raised details benefit from reflected light. On a body shell, cockpit detail, fairing section or trim piece, the gloss metallic surface can shift the visual character of a build with a single colour choice. The compact jar format also makes it practical to keep a dedicated shade on hand for later corrections, matching work or added detail during an ongoing modelling project.
XY acrylic colours
X-19 Smoke, acrylic paint, gloss finish 10 ml
300081519€3.591 l = €359.00
X-19 Smoke brings a glossy, translucent dark tone to plastic model building, giving clear parts, panel areas and selected body sections a deeper finish with controlled brush application from the 10 ml jar. The formula is identified as an X-Acrylic resin special paint for plastic model building, combining binder, pigments and solvents in a liquid paint mixture. The safety data names a flash point of 31-33 °C and a density of 1.0 g/ml at 23 °C. Solvents are partly water-soluble, and the listed boiling range is 80-120 °C. These technical details place the paint clearly in the hobby finishing stage, where measured application and drying conditions matter as much as colour choice. The glossy Smoke effect works especially well when a build needs subtle darkening rather than an opaque coat. On the bench, the 10 ml size fits focused jobs such as framing clear windows, toning lenses or adding depth to vents and recesses on a body shell. Use in well-ventilated areas is stated in the safety data, and eye protection is specified for handling. For model makers refining a painted build, X-19 Smoke adds a distinct finishing option that can shift a surface from flat colour to layered visual detail.
XY acrylic colours
X-19 Smoke, acrylic paint, gloss finish 23 ml
300081019€5.491 l = €238.70
X-19 Smoke brings a gloss tinted finish to plastic model painting, with a 23 ml jar size that fits neatly into bench setups for detail work, touch-ups and controlled brush application. The darker transparent-looking tone suits areas such as windows, lights and canopy sections where a shaded effect adds visual depth to the finished build. This X-Acrylic paint belongs to the gloss range and is identified as X-19 Smoke in the series. The safety data names it as a liquid acrylic resin special paint for plastic model building, with pigments, binders and solvents in the mixture. The documented density is 1.0 g/ml at 23 °C, and the listed boiling range is 80 to 120 °C. The paint is flammable, with a flash point of 31 to 33 °C, so handling belongs in a well-ventilated workspace and away from ignition sources. On the workbench, the 23 ml jar size is easy to keep alongside brushes, masking materials and other finishing colors during multi-step painting sessions. It suits builds that need subtle dark glazing on clear parts, deeper tone on selected panels, or a gloss shaded accent that changes the look of a section without adding bulky texture.
XY acrylic colours
X-25 Clear Green Gloss, acrylic paint, 10 ml
300081525€3.591 l = €359.00
X-25 Clear Green Gloss brings transparent colour and a glossy surface to plastic model painting, giving selected sections a tinted finish while the base beneath remains visible. The clear green tone works especially well where a build needs coloured highlights rather than opaque coverage, such as light units, windows or accent panels. The acrylic resin paint comes in a 10 ml jar that fits bench work focused on detail areas, corrections and small assemblies. Its stated use is plastic model building, making it a focused choice for hobby painting rather than general craft coverage. The gloss character changes how light plays across the painted surface, so raised shapes, clear parts and trim lines read differently after application. Used in thin coats, the transparent effect can be built up gradually to control colour intensity on individual sections. On a workbench, X-25 can be kept alongside other finishing colours for final visual tuning after the main body shades are complete. It also suits restoration of small painted sections on older builds where a fresh transparent green layer is needed on a specific part rather than across the whole model.
XY acrylic colours
XF-22 RLM Flat Grey, acrylic paint, 10 ml
300081722€3.591 l = €359.00
XF-22 RLM Flat Grey brings a muted military-style tone to scale finishing work, with an acrylic formulation and a 10 ml content size that fits neatly into regular paint storage and bench setups. The flat grey colour reads with a low-sheen look that suits technical surfaces, panel sections and detail areas where a softer finish is needed instead of a glossy effect. Within a paint range, a dedicated shade like XF-22 helps keep colour choices consistent across separate sessions and matching parts. The acrylic format makes it suitable for controlled application on smaller sections, edge details and touch-up work where careful placement matters. The 10 ml jar size also supports selective use on individual assemblies rather than committing a larger volume to a narrow colour task. For model projects that call for RLM Flat Grey by name, the label keeps identification straightforward during sorting, planning and repeat application. On the workbench, XF-22 fits naturally into aircraft, vehicle and accessory painting routines where flat tones help break up larger colour blocks and define smaller components. It also works well when a build needs a reserved grey accent that does not overpower surrounding markings or surface detail.
XY acrylic colours
XF-24 Flat Dark Grey, acrylic paint, 10 ml
300081724€3.591 l = €359.00
XF-24 Flat Dark Grey brings a restrained, low-sheen colour tone to scale modelling work in a 10 ml acrylic paint jar. The flat finish suits surfaces that call for a subdued appearance rather than reflected light, helping painted sections sit naturally alongside mechanical, military or interior detailing on a model. The acrylic formula gives model builders a practical paint option for controlled brush application, small-area coverage and careful touch-up work. Flat Dark Grey works well where a darker neutral is needed to separate panels, define recesses or add tonal contrast without shifting into black. The 10 ml content keeps the jar compact on the workbench and easy to store with other modelling colours, while still providing enough paint for repeated detail sessions across multiple assemblies. On a bench setup for armour, aircraft, cars or diorama elements, XF-24 can be used for trim sections, cockpit areas, equipment parts or weathered accents that benefit from a matte grey tone. The shade also supports layered finishing work where subtle contrast and controlled coverage matter more than a glossy surface.
XY acrylic colours
XF-7 Flat Red, acrylic paint, 23 ml jar
300081307€5.491 l = €238.70
XF-7 Flat Red brings a strong matte red tone to scale modelling work, with a 23 ml jar size that suits both detail painting and broader colour coverage. The acrylic paint format supports controlled brush work on smaller parts and measured thinning for airbrush use, giving builders a practical colour option for body sections, figures and scenery elements. The flat finish changes how the painted surface reads, keeping reflections low so panel shapes, folds and sculpted contours stay visually clear. Thin coats help preserve recessed lines and moulded edges, which matters when painting parts with fine surface detail. The jar format also makes it easy to return to the same colour across separate sessions, whether the task is a base coat, a touch-up or a small accent area. Hazard pictograms shown on the label indicate flammable contents and a general warning, so handling should follow the label guidance. On the bench, XF-7 Flat Red fits naturally into projects that need a solid non-gloss red, from military markings and motorsport details to accessories and display scenery. It also works well when a build calls for repeated colour matching across multiple components painted at different stages.
XY acrylic colours
XF-9 Hull Red, acrylic paint, 10 ml jar
300081709€3.591 l = €359.00
XF-9 Hull Red brings a dark red acrylic colour into model finishing work in a compact 10 ml jar. The shade suits projects that call for a deeper, muted red on selected sections, whether the aim is to pick out smaller details or add tonal variation across a build on the workbench. The acrylic paint format supports controlled application on model surfaces, especially where smaller areas need careful handling. The 10 ml content keeps the jar easy to store alongside other modelling supplies while still providing enough paint for repeated use across touch-ups, detail passes and colour adjustments. The designation XF-9 also helps keep the shade identifiable within a broader paint collection when several colours are in use during the same build. On military subjects, vehicle components or equipment details, Hull Red can be used where a darker red note fits the chosen finish. It also works for correction passes after masking or for returning to small sections once the main colours have dried. The jar format keeps the paint close at hand for steady bench work, whether the task is refining edges, covering a small part or adding contrast to a finished model.
Lacquer colours
LP-11 Silver gloss, paint, 10 ml bottle
300082111€3.491 l = €349.00
LP-11 Silver gloss is a 10 ml paint bottle for model finishing, bringing a bright metallic silver tone to parts that need a reflective surface and a crisp gloss look. The compact bottle size suits careful, measured use at the workbench, where small quantities are often enough for trim, accents and selective repainting. The LP paint designation places this colour within a dedicated paint range for modelling, making it a practical choice when a build calls for a specific metallic shade rather than a general-purpose coating. Silver gloss can be used to pick out visual breaks between panels, highlight shaped details or refresh worn-looking sections on an existing model. The 10 ml content also helps keep colour selection flexible, since individual bottles can be chosen by finish and shade for the exact stage of a project. On the bench, LP-11 fits tasks such as detail painting on body sections, adding metallic contrast to selected components or refining small areas after the main colour has been applied. The bottle format keeps the paint ready for focused hobby sessions where precision, colour control and a defined gloss finish matter.
Lacquer colours
LP-24 Semi Gloss Clear, lacquer paint, 10 ml
300082124€3.491 l = €349.00
LP-24 Semi Gloss Clear brings a controlled lacquer finish to model painting work, with a 10 ml bottle size that suits careful application on smaller sections and detail-focused tasks. The semi gloss effect gives painted surfaces a measured sheen that sits between matt and high gloss, helping colour coats and markings read clearly under light without a mirror-like look. Used as a clear finishing layer, LP-24 can help bring separate painted areas into a more consistent visual finish across a build. The lacquer paint format makes it relevant for hobby benches where clear coating, touch-up work and final surface treatment are part of the painting process. The bottle format keeps the quantity focused on precise jobs rather than large-volume coverage, which suits trim pieces, body details and selected panels on scale subjects. On the workbench, LP-24 fits naturally into painting sessions that move from colour application to final surface refinement. It can be used when a model needs a clear layer with moderate sheen, whether the aim is to finish a newly painted section, refresh a small area or give markings and painted parts a more unified appearance.
Lacquer colours
LP-3 Flat Black, paint, 10 ml bottle
300082103€3.491 l = €349.00
LP-3 Flat Black is a 10 ml hobby paint for model finishing where a non-reflective black surface is needed. The flat finish keeps light scatter low on painted areas, so panel sections, interior parts and small details read with a more subdued look during display, photography or close-up inspection. Within the LP paint range, this shade serves as a straightforward reference colour for repeatable work across separate assemblies. The 10 ml bottle suits controlled application on smaller components, edge corrections and local touch-ups without opening a larger container. Flat black is often used where contrast matters more than shine, such as recesses, trim sections or parts that need visual separation from surrounding colours. The short designation LP-3 also makes the shade easy to identify when matching planned colour steps in a build. On the workbench, this paint fits neatly into careful finishing sessions, whether a model needs a clean base tone on selected parts or a darker accent to sharpen moulded detail. It also works well for keeping a consistent black tone across multiple stages of a project, from first paint application to later corrections on handled parts.
TS spray colours
TS-76 Mica Silver, spray paint, 100 ml gloss
300085076€11.491 l = €114.90
TS-76 Mica Silver is a spray paint for model finishing that combines a metallic silver tone with a gloss surface and the fast-curing behaviour of synthetic lacquer. The aerosol format helps cover broad body panels evenly, making it especially useful when a build calls for a uniform coat across larger exterior surfaces. Each can contains 100 ml of paint, and the stated coverage is enough to fully coat 2 to 3 car model bodies in 1/24 scale. That quantity gives clear planning for repeat colour work across more than one shell or for keeping the same finish available for a second body. The paint system also supports layered detailing after the main colour is down. Acrylic and enamel paints can be applied for smaller accents and picked-out sections because they do not affect the TS spray coat. On a car model body, the metallic tone settles best when broad areas such as the roof, bonnet and side sections need a consistent finish. For builders aiming at a higher-shine result, the data recommends TS-13 glossy clear coat as the next step for an even glossier surface. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-17 Pink Gloss, acrylic paint, 10 ml jar
300081517€3.591 l = €359.00
X-17 Pink Gloss brings a vivid pink tone and a reflective finish to plastic model building, with a 10 ml jar size that suits focused paint sessions at the bench. The acrylic resin formula is supplied as a liquid paint for brush application, making it useful for controlled colour placement on smaller sections, trim details and accent areas where a clean edge matters. The paint is identified as X-17 within the X-Acrylic range and is described as Pink Gloss, giving model makers a clear match between code, colour and finish before work begins. According to the supplied safety data, the mixture contains binders, pigments and solvents, has a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C. The same data names it for plastic model building and notes partial water solubility of the solvents. These technical details help place the paint within a hobby workflow where measured application, drying control and colour planning all matter. On a scale build, the glossy pink surface can be used to pick out body details, add contrast to graphic schemes or create a bold single-colour section that catches light under display conditions. For bench use, careful handling and well-ventilated working conditions are required, and the jar format keeps the paint ready for short, precise sessions rather than broad-area coating.
XY acrylic colours
X-23 Clear Blue Gloss, acrylic paint, 23 ml
300081023€5.491 l = €238.70
X-23 Clear Blue Gloss is an acrylic paint for plastic model building, supplied in a 23 ml jar and formulated for brush application. The transparent blue colour adds a glossy tinted layer while allowing moulded detail, panel lines and the shape of the underlying part to stay visible. This shade suits clear sections, small trim areas and selected body details where a solid coat would cover too much of the surface. The clear gloss effect can be used to deepen colour on lenses, windows or accent parts, and it also works for layered finishing where the base shape still needs to show through. The paint belongs to the X-Acrylic range and is identified as X-23 Clear Blue Gloss in the line. The safety data identifies the mixture as flammable liquid category 3 with hazard statement H226, and the label also carries H318 and H336. On the workbench, the 23 ml volume gives enough material for repeated detail sessions across multiple model stages. It fits projects that call for transparent colour rather than opaque coverage, whether the goal is a light blue tint on clear components or a glossy accent on selected exterior parts. For storage and handling, the container should be kept closed and used in well ventilated areas.
XY acrylic colours
X-3 Royal Blue Gloss, acrylic paint, 10 ml
300081503€3.591 l = €359.00
X-3 Royal Blue Gloss brings a vivid blue tone and a glossy surface to plastic model building, with 10 ml of acrylic paint sized for careful, controlled work on smaller areas. The liquid formula suits brush painting where trim lines, cockpit parts or selected body sections need a defined colour layer rather than broad coverage. Within a build, this shade works well when a model needs a clear blue accent, a refreshed painted section or a consistent gloss tone across repeated details. The paint belongs to the X-Acrylic range and is identified as X-3 Royal Blue Gloss, which helps match the colour accurately when planning multi-step finishing work. The safety data identifies it as a flammable liquid mixture, so handling belongs in a well-ventilated workspace and away from heat sources. The same documentation lists pigments, binders and solvents as part of the mixture, giving the paint its liquid handling properties and glossy finish. On the bench, the 10 ml jar fits jobs such as edging smaller components, refining colour separation on bodywork or adding blue highlights to accessories and interior sections. It also suits touch-up work on completed models where a matching gloss blue is needed for a limited area rather than a full repaint.
XY acrylic colours
X-35 Semi Gloss Clear, acrylic paint, 10 ml
300081535€3.791 l = €379.00
X-35 Semi Gloss Clear is an acrylic paint for plastic model building, supplied in a 10 ml jar for controlled finishing work on smaller parts and detailed surfaces. The clear semi gloss character helps give painted sections a more even sheen while keeping underlying colour schemes and markings visible. Within the X-Acrylic range, this paint suits brush-applied work where a measured amount and careful placement matter. The compact jar format is practical for bench storage alongside other model supplies and for returning to the same finish across separate stages of a build. Used on body panels, interior parts or detail sections, the clear coat can help unify the look of different painted areas after colour application. The formula is a liquid paint and is identified in the safety data as flammable, so handling belongs in well-ventilated conditions. For scale modelling sessions, the 10 ml content supports touch-ups, finishing passes and small-surface coverage without taking up much space in the work area. It fits projects where a clear semi gloss layer is needed to refine the final appearance of plastic model components.
XY acrylic colours
X-4 Blue Gloss, acrylic paint, 10 ml jar
300081504€3.591 l = €359.00
X-4 Blue Gloss brings a strong blue tone and a reflective finish to brush-painted model work, giving small surfaces, trim areas and selected panels a clean colour accent. The acrylic resin paint is supplied in a 10 ml jar, a practical size for detail painting, touch-ups and shorter bench sessions where a full tin would be more than needed. The paint is identified in the data as a glossy brush paint for plastic model building, making it suited to controlled application on parts that benefit from a brighter surface sheen. Its liquid format allows measured loading on the brush for narrow edges, smaller components and separated colour zones. The blue shade can be used to define contrast against neighbouring colours, pick out individual sections or refresh worn painted spots on an existing build. The compact jar also stores easily alongside other colours in a modelling setup. On the workbench, X-4 Blue Gloss fits naturally into projects that move between assembly, detailing and finishing, especially when a model needs precise colour placement rather than broad coverage. It also works well for revisiting small areas after handling, masking or final fitting, keeping the finish consistent across the completed model
XY acrylic colours
XF-4 Yellow-Green, acrylic paint, 23 ml
300081304€5.491 l = €238.70
XF-4 Yellow-Green is an acrylic paint for model finishing, supplied in a 23 ml jar that fits neatly into a bench setup for regular painting sessions. The Yellow-Green tone brings a clear, vivid colour note to body details, accessories and other painted sections where a defined shade matters. The acrylic formula suits careful brushwork on smaller areas and controlled coverage across broader sections, giving builders a practical option when a project calls for clean colour placement. The jar format keeps the paint ready for repeated use across separate stages of a build, whether the task is initial colour application, later touch-up work or matching an earlier painted section. In a paint range, the XF-4 designation also helps identify the exact shade quickly when several colours are in use on the workbench. On a model bench, the 23 ml size works well for ongoing projects that return to the same colour more than once. It also fits neatly into finishing routines where detail parts, trim areas and small assemblies are painted separately before final installation.
XY acrylic colours
XF-50 Flat Field Blue, acrylic paint, 23 ml
300081350€5.491 l = €238.70
XF-50 Flat Field Blue is an acrylic paint for model finishing, supplied in a 23 ml jar and matched to a flat, non-gloss appearance. The muted Field Blue shade suits painted equipment, accessory parts and selected body details where a cooler, restrained tone fits the overall scheme on a scale project. The paint is identified as blue in the technical data and is supplied as a liquid, which supports measured application on smaller surfaces and controlled edge work around raised detail. The safety data sheet lists a flash point of 33°C and classifies the contents as flammable liquid category 3, so handling belongs in a well-ventilated workspace with appropriate care. Density is listed at about 1.2 g/mL at 23°C, giving a concrete reference for the paint's liquid format and jar content. The same document also identifies the mixture as causing serious eye irritation and as harmful if inhaled. On the bench, XF-50 fits jobs such as painting stowage, fuel cans, field accessories or selected panels that call for a matte blue note rather than a reflective finish. The 23 ml size also works well when a specific shade is needed for repeat touch-ups across several sessions without moving to a larger paint volume.
XY acrylic colours
XF-54 Flat Dark Sea Grey, acrylic paint, 10 ml
300081754€3.591 l = €359.00
XF-54 Flat Dark Sea Grey is an acrylic brush paint in a 10 ml jar, created for scale finishing where a restrained matt grey is needed instead of a reflective surface. The shade suits military subjects, naval details and equipment sections that call for a darker sea grey tone with a flat look. As a liquid paint, XF-54 supports careful brush work on smaller areas, panel sections and fine raised detail where controlled placement matters. The acrylic formulation gives model builders a dedicated colour option for adding contrast between neighbouring parts or refining a paint scheme with a specific grey rather than a generic mixed tone. The compact jar format keeps the colour easy to store with other modelling supplies and simple to reach for during repeat touch-ups on the same build. The naming stays precise within the XF range, which helps when matching a planned colour callout on a kit or reference sheet. On ships, vehicles, aircraft details or scenic accessories, this shade can be used to block in darker sections, sharpen painted boundaries or adjust the balance of a camouflage layout. It also fits bench sessions focused on small corrections, layered finishing work or adding a flat grey accent after the main colours are already in place.
XY acrylic colours
XF-57 Flat Buff, acrylic paint, 10 ml jar
300081757€3.591 l = €359.00
XF-57 Flat Buff is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a yellow-brown shade with a flat surface appearance. The subdued tone suits painted details that need an earthy, dusty or faded look rather than a reflective finish, whether on vehicle panels, stowage parts or scenic sections. Within a paint lineup, the XF-57 designation helps identify the exact colour quickly when a build calls for repeatable shade selection across several sessions. The acrylic medium lends itself to careful application on smaller sections where edge control and gradual coverage matter. Flat Buff can be used to break up larger colour areas, add dry-looking tonal variation or support weathering effects on military subjects, utility vehicles and diorama elements. The 10 ml quantity also fits neatly into organised hobby storage and keeps a frequently used shade close at hand for touch-up work. On the bench, this paint suits detail passes on accessories, equipment and terrain pieces, then returns for later corrections once the main colours are in place. It also works well in finishing stages where a muted yellow-brown note helps surfaces look sun-faded, dusty or field-worn.
XY acrylic colours
XF-65 Flat Field Grey, acrylic paint, 10 ml
300081765€3.591 l = €359.00
XF-65 Flat Field Grey is an acrylic paint shade for model finishing, supplied in a 10 ml jar for compact bench use and controlled colour selection. The flat grey tone suits subjects that call for a muted, non-gloss surface, whether the goal is uniform coverage on a small section or careful colour placement across detailed parts. Within a paint range, a dedicated shade like XF-65 helps keep colour matching consistent across separate sessions, spare parts and later touch-ups. The 10 ml size is easy to store alongside other modelling supplies and keeps a specific tone ready for camouflage areas, equipment details or weathered surfaces. The acrylic format makes this paint a practical choice for hobby work where measured application and clean shade separation matter. The label identifies the colour directly as Flat Field Grey, which helps when sorting paints by code and tone at the workbench. On military vehicles, field equipment or diorama elements, a flat grey can be used to define panels, accessories and subdued surface areas with a restrained finish. It also fits smaller correction jobs where opening a larger paint volume would be unnecessary.
Primers
Fine Surface Primer L Pink 180ml Spray Primer
300087146€16.991 l = €94.39
Fine Surface Primer L Pink 180ml is a surface preparation spray for model work on plastic, metal and wood. The pink tone is especially suited to use beneath red paint, giving bright colour coats a base that helps them read cleaner and with more consistency across the finished surface. The formula is useful when seam lines need filling and when scratches show up in small or awkward sections that need closer control. In those spots, the primer can be applied with a modeling brush, which makes it easier to work around edges, corners and recessed details without flooding the surrounding area. As a preparatory coat, it helps even out the surface before colour is added, so the next paint layer sits on a more uniform foundation. The 180 ml can supports repeated use across larger builds or several smaller assemblies where multiple parts need the same undercoat. On a car body, aircraft panel or accessory part, the pink base can be laid down before red paint to support a stronger final tone. It also suits repair work between build stages, where a corrected seam or sanded mark needs another primer pass before the next coat is sprayed. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Gloss Coating Varnish 10ml, model finish
300087151€10.291 l = €1,029.00
Gloss Coating Varnish 10ml adds a clear finishing layer to painted gloss surfaces, bringing out stronger luster while helping to keep fingerprints from marking the final appearance. On darker colours, the coating gives added visual depth, so black, deep blue or racing red panels read with a fuller shine under display lighting. The water-based formula is described as a surface polish and comes in a 10 ml bottle for hobby finishing work. It can be applied with a cloth, which suits broad body sections, fairings and other smooth painted areas where an even wipe-on coat is useful. Beyond boosting gloss, the coating also helps mask small abrasions and fine scratches that can appear during handling. The liquid is colourless and transparent, with a pH value of 7.0 ±0.5 at 25 °C and a relative density of 1.00 at 20 °C. One bottle is enough for roughly 15 models in 1:24 scale, making it a practical bench companion for repeated builds and refresh work between display sessions. After decals, paint curing and final polishing, the varnish supports a cleaner finished look on cars, bikes and other painted scale subjects. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-19 Gun Metal, paint, gloss finish 10 ml
300082119€3.491 l = €349.00
LP-19 Gun Metal brings a dark metallic shade to scale finishing, with a gloss surface that gives painted sections a clean reflective edge under workshop light or on a completed display model. The 10 ml jar size suits focused paint work where controlled quantity matters, especially on smaller assemblies and detail zones. Within the LP-Paint range, this colour is positioned for metallic areas that need a deeper tone than bright silver. Gun Metal works well on mechanical-looking sections such as housings, trim pieces, vents or structural details where a darker metal appearance fits the subject. The compact jar format is easy to store alongside other finishing supplies and practical for repeat touch-up work across separate stages of a build. The label identifies the shade as LP-19, making it straightforward to match with build notes or colour callouts. On a model bench, the gloss finish helps metallic details stand apart from flat surrounding colours and gives small painted parts a more defined visual break. During restoration, repainting or fresh assembly work, the 10 ml volume supports precise use on selected areas rather than broad coverage.
Lacquer colours
LP-4 Flat White 10 ml, lacquer paint
300082104€3.491 l = €349.00
LP-4 Flat White is a lacquer paint in a 10 ml jar, made for scale model finishing where a flat white tone is needed on small parts, trim sections or surface details. The compact jar format keeps the paint close at hand on the workbench and suits careful application during painting sessions that focus on precision rather than broad coverage. Within the LP paint range, this shade adds a dedicated flat white option for builders planning consistent colour layouts across separate assemblies. A lacquer paint like LP-4 is suited to detail-led work where edges, recessed areas and small visual accents need a controlled, even tone. The 10 ml content also fits projects that call for selective use rather than large-volume coating, such as cockpit details, markings, panel sections or correction work during a finishing stage. On military models, motorsport subjects or custom builds, a flat white shade can define contrast without adding shine. The jar format supports repeated bench use across multiple sessions, whether the task is refining a livery, picking out interior parts or adding final colour notes to a display model.
Lacquer colours
LP-60 NATO Black Flat 10 ml, paint for models
300082160€3.491 l = €349.00
LP-60 NATO Black Flat is a 10 ml model paint for finishing scale builds with a muted black tone. The flat finish keeps reflections low on painted sections, which suits military colour layouts, equipment details and darker accent areas where a gloss effect would look out of place. The LP-Paint designation places this shade within a dedicated paint range for model work, and the compact 10 ml bottle suits targeted applications rather than broad coverage. Small panels, accessories and touch-up areas can be painted with a colour that stays visually restrained on the surface. The shade name NATO Black points to a military-style black rather than a deep glossy display finish, which helps when matching subdued vehicle schemes and field equipment details. The label and hazard symbols identify it clearly as a chemical paint. On the workbench, this colour fits finishing stages where dark tools, trim sections, stowage parts or selected body details need a flat black appearance. It also works for repainting small worn spots on an existing build when the surrounding finish calls for a non-shiny surface. Careful storage and handling are required during use.
Lacquer colours
LP-63 Titanium Silver, paint, gloss 10 ml
300082163€4.591 l = €459.00
LP-63 Titanium Silver is a gloss paint for model finishing, supplied in a 10 ml jar and focused on a bright metallic silver tone. The colour suits builds that need a clean reflective effect on selected sections, whether the goal is a full painted surface or smaller highlighted areas that catch the light differently from surrounding tones. Within a paint setup, this shade works well when a build calls for a cooler metallic note rather than a flat grey or plain silver look. The gloss surface changes how edges, panel lines and shaped parts read once the paint has dried, giving contours a sharper visual break. The compact 10 ml quantity also fits neatly into targeted paint planning, where one specific colour is needed for trim, mechanical details or controlled refinishing work. The product data identifies LP-63 as Titanium Silver gloss, making it easy to match the exact shade again in later repair or continuation work. On the workbench, the jar size supports short finishing sessions, detail passes and colour corrections on model parts without committing to a larger volume. It also suits keeping a dedicated metallic shade on hand for repeat use across separate projects where the same silver tone is needed.
Lacquer colours
LP-70 Gloss Aluminum, lacquer paint, 10 ml
300082170€4.591 l = €459.00
LP-70 Gloss Aluminum brings a bright metallic lacquer finish to model painting in a compact 10 ml jar. The gloss aluminum tone suits trim, mechanical details and selected body sections where a reflective metal effect sharpens the overall look of a build. This paint belongs to the LP lacquer range and is identified as LP-70 in the series. The supplied safety data names it as a paint for plastics, making it relevant for many common model parts and accessories. The formula is a solvent-based mixture with pigments and binders, and the hazard labeling on the container marks it as flammable and as requiring careful eye and vapor handling. The data sheet also states a flash point of -3 °C and notes that the paint is practically insoluble in water. These technical properties matter during storage, ventilation and application planning at the workbench. Used on exterior accents, cockpit sections or exposed mechanical areas, the gloss aluminum shade can create crisp contrast against darker colors and help small molded details read more clearly. The 10 ml size fits touch-up work, focused detailing and single-build paint planning where a full-size paint supply is not required.
PS spray colours
PS-16 Metallic Blue, polycarbonate spray paint
300086016€10.991 l = €109.90
PS-16 Metallic Blue brings a reflective blue finish to polycarbonate model surfaces in a 100 ml aerosol can, making it a focused choice for RC bodyshell painting and other compatible hobby applications. The spray format supports fast, even coverage across broad panels, roof sections and curved contours that are awkward to coat with a brush. This paint is specified for polycarbonate, so the material match is clear when planning colour work on transparent shells and formed body parts. The PS-16 colour code also helps when a build or repaint calls for the same shade again on a replacement shell or a second body. Metallic pigment changes the look of the surface as light moves across edges, arches and raised details, which gives shaped panels more visual depth than a flat solid tone. The 100 ml can size keeps the format compact on the workbench while still offering enough paint for dedicated modelling tasks. In practical use, PS-16 fits the stages where a shell has been prepared and is ready for colour, whether the goal is a fresh race body, a repaired panel section or a matching repaint for an existing model. It also works well as part of a planned finishing setup where several coded colours are used across different bodyshell areas. Warning! Not suitable for children under 14 years.
PS spray colours
PS-2 Red, polycarbonate spray paint, 100 ml
300086002€10.991 l = €109.90
PS-2 Red is a spray paint for polycarbonate model bodies, supplied in a 100 ml can for hobby finishing work on RC shells and other compatible clear body parts. The red shade gives body panels a strong, clean colour presence that reads clearly across curved surfaces and larger sections alike. The polycarbonate-specific formulation makes this paint relevant where the body material matters, especially on shells that need a coating matched to that substrate rather than a general craft paint. In aerosol form, the paint can be applied across roof sections, side panels and wheel arch areas with steady passes that suit broad exterior coverage. The 100 ml volume gives a practical amount for body painting tasks while keeping the can compact in the workshop. PS-2 Red also fits colour-led custom builds where a single solid tone forms the base for further detailing, masking or racing-style graphics. On the bench, the can suits preparation for RC body finishing, touch-up work on compatible painted sections, or a fresh colour scheme for a new shell. In a model workshop setting, the red tone stands out on track-inspired designs and gives custom body projects a clear visual focal point. Warning! Not suitable for children under 14 years.
PS spray colours
PS-59 Dark Metallic Blue, polycarbonate spray paint
300086059€11.991 l = €119.90
PS-59 Dark Metallic Blue is a spray paint for polycarbonate model bodies, created for finishing RC shells with a darker metallic tone and an even sprayed coat. The 100 ml can gives model builders a practical format for covering broad body sections while still keeping control over narrower areas such as roof lines, side panels and curved fenders. The polycarbonate-specific formula suits clear bodyshell work where a sprayed finish needs to follow the shell's contours cleanly. Dark Metallic Blue brings a cooler, deeper colour note than a flat blue, so panel shapes and body lines stay visible as the shell moves under changing light. The aerosol format also helps distribute colour across larger surfaces in a continuous pass, which is useful when working around arches, cabin sections and rear decks on RC car bodies. Used as part of a custom livery, PS-59 fits full single-colour paint jobs as well as darker accent sections on racing and off-road shells. On the bench, the 100 ml volume gives enough material for planned paint sessions without moving to bulk containers, and the spray can stores neatly with other finishing supplies between body projects. Warning! Not suitable for children under 14 years.
TS spray colours
TS-46 Light Sand Flat Spray Paint, 100 ml Can
300085046€10.491 l = €104.90
TS-46 Light Sand Flat is a 100 ml acrylic resin spray paint for model finishing, combining a muted sand tone with the speed and reach of an aerosol can. The flat finish gives painted parts a dry, low-sheen surface that suits military subjects, desert vehicles and weathered details on larger sections where brush marks would interrupt the look. This TS paint is supplied as a ready-to-spray aerosol, so coverage is applied directly from the can rather than mixed for airbrush use. The safety data identifies it as an extremely flammable aerosol in a pressurised container, with hazard labelling for skin and eye irritation and for respiratory effects, so use belongs outdoors or in a well-ventilated area. The visible can format also keeps the colour code TS-46 easy to identify on the workbench when several shades are in rotation during a paint session. On armour builds, field equipment, scenery parts or body details, Light Sand Flat works where a subdued earth tone is needed across wider surfaces and repeated shapes. The 100 ml fill supports multiple passes on model components, touch-up stages between coats, or keeping one dedicated shade on hand for ongoing finishing work. Warning! Not suitable for children under 14 years.
TS spray colours
TS-48 Gunship Grey Flat, spray paint, 100 ml
300085048€10.491 l = €104.90
TS-48 Gunship Grey Flat is a 100 ml spray paint for model finishing, supplied in an aerosol can for broad, even coverage across larger sections and shaped parts. The Gunship Grey tone and flat finish suit subjects that call for a muted surface, from aircraft panels to military equipment details and mechanical bodywork. This special acrylic resin spray is intended for plastics and gives builders a practical way to cover surfaces that are slower to finish with a brush. The aerosol mist helps reach curves, edges and recessed shaping with a more consistent coat across the same section. The can is labelled TS-48 within the TS paint range, making the shade easy to match when a build calls for a specific colour reference. Hazard pictograms on the can identify it as a flammable aerosol and indicate careful handling during use and storage. On the bench, the 100 ml volume suits repeated work across multiple assemblies, touch-ups on larger model sections, or a full colour stage on a single build. It fits naturally into painting sessions focused on armour, aircraft, sci-fi subjects or utility vehicles where a flat grey finish supports realistic surface character. Warning! Not suitable for children under 14 years.
TS spray colours
TS-62 NATO Brown Flat, spray paint, 100 ml
300085062€10.491 l = €104.90
TS-62 NATO Brown Flat is a 100 ml spray paint for model finishing, giving plastic surfaces a muted brown coat with the speed and reach of an aerosol can. The flat colour suits military subjects, field accessories and weathered details where a low-sheen surface helps preserve the scale look across broader areas. This TS series paint is described as a special acrylic resin spray, combining pigments, binder and propellant in a pressurised can for direct application. The aerosol format helps cover larger sections more evenly than hand brushing, which is useful on body shells, armour panels and terrain parts with repeated edges or recessed shapes. The colour reference TS-62 keeps the shade easy to match within a planned paint scheme or touch-up workflow. The can contains 100 ml net volume, giving enough material for multiple passes depending on the size and shape of the painted parts. Used on model kits and hobby components, the spray suits bench sessions where broad, consistent colour coverage matters as much as the final tone. For handling, the safety data states that the aerosol is extremely flammable, the container is pressurised and should not be exposed to temperatures above 50°C, so application belongs in well-ventilated work areas with careful storage between sessions. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-21 Flat Base, acrylic paint, 10 ml bottle
300081521€3.591 l = €359.00
X-21 Flat Base is an X-Acrylic paint for plastic model building, supplied in a 10 ml bottle for controlled bench use on smaller painting jobs, detail areas and measured paint mixes. The compact bottle size keeps the amount manageable when a project calls for precise handling rather than large-volume coverage. The paint belongs to the X-Acrylic range and is identified as X-21 Flat Base, making it easy to match within an established hobby paint system. The safety data names it as a liquid acrylic resin special paint and lists a density of 1.0 g/ml at 23 °C. The same data also states a boiling range of 80 to 120 °C and a flash point of 31 to 33 °C. For workshop handling, the label information specifies use in well-ventilated areas and eye protection during application. On the workbench, the 10 ml format suits careful dispensing into palettes, mixing cups or small paint trays for scale modelling sessions. It also stores efficiently alongside other coded colours in the X-Acrylic line, helping keep paint selection orderly during ongoing build, finishing and touch-up work.
XY acrylic colours
X-32 Titanium Silver Gloss, acrylic paint, 23 ml
300081032€6.291 l = €273.48
X-32 Titanium Silver Gloss brings a bright metallic tone to scale model painting, with a 23 ml jar sized for repeated use across detail sections, trim lines and larger highlighted areas. The glossy titanium silver colour gives parts a reflective finish that changes the look of bodywork, mechanical elements and accent pieces with a clean, crisp sheen. This X-Acrylic paint is identified in the data as a liquid brush paint for model making. The mixture contains binders, pigments and solvents, and the safety data lists a density of 1.0 g/ml at 23°C, a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The paint is described as silver in colour with an alcohol odour. For use, vapour and aerosol should be avoided, and application belongs in open air or well-ventilated rooms. The container should be kept tightly closed and stored in a cool, ventilated place away from heat and ignition sources. On the workbench, the 23 ml volume supports touch-ups, repeated coats and colour matching across several model sections. The metallic gloss tone suits exterior trim, engine details and other parts that benefit from a brighter silver finish. Eye protection is stated for handling, and the jar format keeps the paint ready for measured brush loading during careful model painting sessions.
XY acrylic colours
XF-10 Flat Brown, acrylic paint, 10 ml
300081710€3.591 l = €359.00
XF-10 Flat Brown is an acrylic paint in a 10 ml format, giving scale modelling work a defined brown tone for detail areas, small sections and controlled colour application. The flat finish keeps the surface non-gloss, which suits subjects where a muted painted look is needed rather than a reflective coat. Within the XF acrylic range, the XF-10 code identifies Flat Brown clearly and helps keep colour selection consistent across different builds. The 10 ml size fits neatly into a modelling setup and supports measured use when painting accessories, interior sections or selected exterior details. The shade can be used where brown tones are needed on vehicles, scenery elements or diorama parts, depending on the subject being finished. The visible hazard labelling indicates that the paint should be handled with appropriate care during modelling work. On the bench, XF-10 Flat Brown suits careful brush application on smaller parts and touch-up work after main colour stages are complete. It also fits projects where a flat brown tone is needed to break up larger painted areas with contrast and more specific surface detail.
XY acrylic colours
XF-49 Flat Khaki, acrylic paint, 10 ml
300081749€3.591 l = €359.00
XF-49 Flat Khaki brings a muted flat colour tone to model finishing in a compact 10 ml format that fits neatly into the paint rack and the regular rhythm of bench work. As an acrylic paint, it suits hobby painting tasks where controlled application, small-area coverage and consistent colour placement matter, from detail accents on parts to touch-up work during a longer build. The Flat Khaki shade works especially well where a subdued, non-gloss surface is needed for realistic military, field or utility styling. The XF designation places it within Tamiya's acrylic paint range, making it a clear match for builders who organise colours by series and shade code. The 10 ml volume is easy to keep on hand for repeat use on matching components, scenic sections or later corrections. The label code XF-49 also helps identify the exact colour quickly when a project calls for the same tone again. On the workbench, this paint suits careful brush application on smaller sections as well as planned colour steps within a broader finishing session. It also fits stash building for model makers who keep specific shades ready for vehicles, figures, equipment and terrain details across multiple projects.
XY acrylic colours
XF-52 Flat Earth, acrylic paint, 10 ml
300081752€3.591 l = €359.00
XF-52 Flat Earth is an acrylic paint in a 10 ml jar, offering a compact format for model finishing, colour correction and carefully placed brushwork. The Flat Earth tone reads as a subdued brown, making it a useful choice where painted surfaces need a soil-like, field-worn or terrain-based look rather than a brighter decorative finish. Within a modelling setup, this shade can support groundwork, vehicle details and selected figure areas that call for an earthy colour note. The 10 ml size keeps the jar easy to store alongside other paint references while still giving enough material for repeated small-scale applications. The XF designation identifies the exact shade within the range, which helps keep colour planning consistent across multi-step painting sessions. The acrylic paint format suits controlled work on edges, recesses and smaller sections where gradual coverage is often preferred over flooding a surface. On the bench, XF-52 Flat Earth fits naturally into weathering passes, terrain painting and touch-up work after assembly or base coating. The visible hazard pictograms show a flame symbol and an exclamation mark, indicating flammable contents and the need for careful handling during use and storage. In a collection of modelling supplies, this jar adds a clearly defined brown reference for projects that call for grounded, natural-looking colour placement.
XY acrylic colours
XF-58 Flat Olive Green, acrylic paint, 23 ml
300081358€5.491 l = €238.70
XF-58 Flat Olive Green is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-58 shade code. The flat olive green tone suits military subjects, field gear and scenery sections where a muted surface reads more convincingly than a gloss coat, whether the paint is used for broad coverage or small corrective passes. The paint is listed in the safety data as a liquid with an alcohol odour and an approximate density of 1.2 g/ml at 23°C. The same document states a flash point of 33°C and classifies the mixture under CLP with H226, H319, H332 and H336. That makes the handling context clear: use in well-ventilated areas and keep the jar away from heat, sparks and open flames. For bench work, the brush-paint format helps place colour on edges, stowage details, panel sections and other small features where controlled application matters. On a workbench, the 23 ml volume fits neatly into regular painting sessions, from base coating selected parts to refining worn equipment tones and blending scenery details. XF-58 also works as a practical reference shade when matching touch-ups across separate assemblies in the same build.
XY acrylic colours
XF-66 Flat Light Grey, acrylic paint, 10 ml
300081766€3.591 l = €359.00
XF-66 Flat Light Grey is an acrylic paint in a 10 ml jar, sized for precise work on scale builds where a muted grey tone suits smaller sections, touch-ups and carefully controlled coverage. The flat finish keeps reflections low, helping painted details sit naturally alongside mechanical parts, interior areas and weathered surfaces. The XF designation identifies this shade within the Tamiya paint range, which helps when a build calls for the same colour again across separate sessions. The compact jar format stores easily with other workshop supplies and keeps a clearly marked colour ready for repeat use on model kits and accessories. Hazard pictograms shown on the label indicate flammable contents and a general warning for handling, so the paint belongs in a well-organised hobby setup with appropriate care during use. On the bench, this shade suits fine detail passes, small corrections after assembly and selective finishing on parts that need a restrained grey rather than a glossy coat. It also works well when a project calls for consistent colour placement across several components, keeping the visual result even and measured.
XY acrylic colours
XF-66 Flat Light Grey, acrylic paint, 23 ml
300081366€5.491 l = €238.70
XF-66 Flat Light Grey brings a muted, non-gloss colour tone to model painting, with 23 ml in a jar sized for repeated bench use across detail work, touch-ups and broader finishing passes. The acrylic paint format supports controlled handling on small parts, where clean edges and steady coverage matter as much as the final shade. The Flat Light Grey colour fits a wide range of scale subjects, from interior sections and equipment pieces to body details that call for a subdued painted surface rather than a reflective one. On layered paint schemes, this tone helps separate adjacent areas with a softer visual break than darker greys. The 23 ml content gives enough volume for recurring use within longer projects, whether the task is refining a single component or returning to the same colour across several stages of a build. The code XF-66 also keeps the shade easy to identify when matching an existing paint plan. On the workbench, this paint suits careful brushwork on edges, recesses and smaller fitted parts, while the flat finish supports scale scenes where a low-sheen appearance looks more convincing. It also works well for keeping a consistent grey tone available across ongoing model and accessory projects.
XY acrylic colours
XF-68 Flat NATO Brown, acrylic paint, 23 ml
300081368€5.491 l = €238.70
XF-68 Flat NATO Brown is an acrylic paint for model finishing, supplied in a 23 ml jar for compact storage and measured use at the workbench. The flat colour tone gives painted surfaces a subdued appearance that suits military subjects, equipment details and weathered sections where shine would look out of place. The XF series designation helps identify the shade clearly when planning a paint set or returning to the same colour for later touch-ups. Acrylic paint is well suited to controlled application on smaller areas, where edges, accessories and surface sections benefit from careful colour placement. The 23 ml volume fits projects that call for repeated detail painting without taking up much space among other finishing supplies. The colour name Flat NATO Brown also makes the intended tone easy to recognise when building camouflage palettes or muted earth-tone combinations. On the bench, this paint suits builders working through body details, stowage parts, interior sections or terrain elements that need a brown shade with a flat finish. It also works well for keeping a dedicated military palette organised, with the jar size and XF-68 code easy to read during longer painting sessions.
Diorama texture colours
Epoxy Putty Quick Type, 2-component modeling putty
300087051€7.491 kg = €299.60
Epoxy Putty Quick Type is a 2-component modeling putty for shaping, modifying and repairing parts in model making. The white and beige compound is supplied as 2 separate sticks that are kneaded together before application, creating a workable mass for filling gaps, building up missing areas and forming new contours on plastic model surfaces. The Quick Type formulation suits bench work that benefits from a faster-setting putty, whether the task is reworking a panel line area, fabricating a small detail or correcting a join. With 25 g in the pack, the quantity fits focused hobby jobs without opening a large batch. The material is intended for re-modeling, detail fabrication, sculpturing, modifications and repairs, which makes it useful across scratchbuilding, conversion work and restoration of damaged sections. The stick format also helps with measured portioning, since only the required amount needs to be mixed for each stage. At the workbench, the putty can be pressed into seams, shaped over altered sections or formed into added features before finishing the surrounding area. It suits model projects that need clean corrections, extra surface detail or rebuilt edges where the original part no longer matches the planned shape. Warning! Not suitable for children under 14 years.
Primers
Fine Surface Primer L, spray primer, Oxide Red
300087160€16.491 l = €91.61
Fine Surface Primer L in Oxide Red is a spray primer designed for model surfaces and sized for repeated workshop use with its 180 ml can. The oxide red shade suits AFV subjects such as tanks especially well, because it creates a believable base layer for finishes that show wear, exposed edges and worked metal. The formula is intended for plastic and metal, so the same can can prepare different parts within one build before colour coats are added. Its fine spray pattern helps the primer settle across flat armour plates, curved sections and small raised details with a more uniform starting layer. When chipping and weathering techniques remove parts of the top coat, the red oxide undercoat remains visible in a way that matches the look often associated with military vehicles. The same base layer also influences later paint application by giving top colours a deeper, richer cast. On the bench, this makes the primer useful both at the start of a fresh paint job and during more advanced finishing plans built around layered wear. It suits builders working on single vehicles as well as those preparing several subassemblies in sequence, where one consistent undercoat helps keep the final finish visually coherent. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-21 Italian Red, paint jar, gloss 10 ml
300082121€3.491 l = €349.00
LP-21 Italian Red is a gloss paint in a 10 ml jar, suited to model finishing where a clean red coat and a reflective surface are part of the final look. The compact jar format keeps the colour easy to store on a workbench and easy to reach during detail painting, body accents or small-area corrections. The shade name points to a strong red tone that fits classic racing schemes, trim sections and visual highlights on scale subjects. The gloss finish gives painted areas a smoother, brighter appearance than a flat coat, which helps colour breaks, panel details and accent parts stand out more clearly. The 10 ml content also suits controlled use on smaller sections where measured paint application matters. Where a build uses several red elements across separate stages, the jar format keeps the same colour ready for repeat passes and later touch-ups. On a modelling bench, LP-21 Italian Red fits naturally into body painting, cockpit detailing and finishing work on parts that need a polished red surface. It also works well for keeping a specific red tone available for ongoing projects, repair work after handling, or fresh visual contrast on selected components.
Lacquer colours
LP-40 Metallic Black, lacquer paint, 10 ml
300082140€3.491 l = €349.00
LP-40 Metallic Black brings a gloss lacquer finish and a darker metallic tone to model painting work, with 10 ml in the bottle for focused application on selected parts, trim sections or smaller surface areas. The LP-Paint designation places this colour within Tamiya's lacquer paint range, giving builders a specific reference when planning a finish scheme or matching later touch-up work. The Metallic Black shade combines black coverage with a reflective effect that changes the look of panels and details under light, making it useful where a plain solid black would read flatter. The gloss finish supports a smoother visual result on exterior surfaces and detail parts that benefit from a polished appearance. The compact 10 ml size also fits projects that call for a single defined colour rather than a larger paint volume. The bottle format keeps the paint easy to store alongside other modelling supplies between painting sessions. On car bodies, motorcycle parts, aircraft details or other scale components, LP-40 can be used to define contrast areas, darker metallic sections and trim elements within a broader colour layout. It also suits bench work where a named lacquer shade is needed for repeatable finishing across separate stages of the same build.
Lacquer colours
LP-44 Metallic Orange, paint, gloss finish 10 ml
300082144€4.491 l = €449.00
LP-44 Metallic Orange brings a bright gloss finish to scale modelling work, with a metallic orange tone that catches light across body panels, trim pieces and small detail areas. The 10 ml jar format keeps the paint compact on the workbench and easy to reach during focused finishing sessions. This paint is identified in the data as brush paint, making it suited to controlled application on edges, recesses and smaller components where precise placement matters. The gloss finish gives the colour a smooth, reflective look, while the metallic effect adds visual depth that reads differently on flat panels and shaped surfaces. Used on model car parts, accessories or detail sections, the orange shade can define accents, pick out separate components or refresh selected areas without opening a larger paint format. The jar size also makes it practical for touch-up tasks and smaller-scale colour work. On a hobby desk, LP-44 fits neatly into paint racks, tool trays or compact storage beside brushes and mixing tools. During a build or repaint session, the metallic orange tone can be used for custom highlights, replacement parts or visual contrast on selected sections of a scale subject.
Lacquer colours
LP-52 Clear Red Gloss, lacquer paint, 10 ml
300082152€3.491 l = €349.00
LP-52 Clear Red Gloss brings a transparent red lacquer finish to model painting, with a 10 ml content size that suits detail-led work on smaller parts and carefully controlled colour application. The clear formula lets surface structure remain visible beneath the colour layer, creating a tinted effect that works especially well where depth and shine need to appear together. Within the LP paint range, this shade supports finishing tasks that call for a translucent red rather than an opaque coat. It can be used to build colour gradually over prepared surfaces, to adjust the tone of selected sections, or to pick out visual details that benefit from a glossy, light-catching look. The lacquer format makes it a dedicated choice for model makers who plan colour placement step by step and want a distinct clear shade in the paint rack. On a workbench, LP-52 Clear Red Gloss fits naturally into projects with lenses, signal details, decorative inserts or layered colour effects. The compact bottle stores easily alongside other finishing colours and is ready for sessions focused on refinement, correction and final visual accents.
Lacquer colours
LP-59 Flat NATO Brown, lacquer paint, 10 ml
300082159€3.491 l = €349.00
LP-59 Flat NATO Brown is a lacquer paint for scale model finishing, supplied in a 10 ml jar and matched to a subdued brown tone used across military subjects and equipment details. The flat surface helps painted areas sit down visually, so panels, tools and stowage parts avoid unwanted gloss and keep the finish closer to the look often sought on service vehicles. Within a paint rack, this shade works as a dedicated color rather than a mixed approximation, which helps keep camouflage sections consistent across separate sessions. The 10 ml content suits focused application on selected areas, whether the task is blocking in a base section, refining smaller components or returning later for touch-up work on the same build. The LP designation and the LP-59 code also make the color easy to identify when several browns are used side by side for layered finishing. On armored vehicles, field equipment and diorama accessories, Flat NATO Brown can be used to define contrast between neighboring tones and to break up larger painted surfaces with a more realistic military palette. It also earns its place on the bench for repeat jobs such as repainting tools, crates or external fittings where a stable, named shade matters from one model to the next.
Lacquer colours
LP-62 Titanium Gold, paint, gloss 10 ml
300082162€4.591 l = €459.00
LP-62 Titanium Gold brings a bright metallic gloss finish to scale modelling work where trim, fittings and accent sections need a more defined visual break than a flat colour can provide. The 10 ml jar size keeps the paint easy to store and practical to reach for during detail painting sessions at the workbench. The Titanium Gold shade is suited to small-area application, where metallic contrast can pick out moulded lines, raised sections or decorative parts with more clarity. As part of the LP paint range, it serves finishing tasks that call for a controlled amount rather than a large-volume coating step. The gloss character gives reflected light a cleaner response on painted details, which helps gold elements stand apart from surrounding colours. The compact format also makes it useful for touch-ups and repeat use across separate model projects. On vehicle models, figures or display builds, this paint can be used to define selected components and add a sharper metallic note to the overall colour layout. It also fits bench sessions focused on correction work, final detailing or adding contrast after the main colours are already in place.
PS spray colours
PS-15 Metallic Red, polycarbonate spray paint
300086015€10.991 l = €109.90
PS-15 Metallic Red is a spray paint for polycarbonate model bodies, bringing a vivid metallic finish to RC shells and other clear formed parts. The aerosol format pairs the colour with quick, broad application, so large roof sections, side panels and curved fenders can be coated with a steady pass rather than brush strokes. The formula is specified for polycarbonate, which matters when painting flexible clear bodies used in model building. With 100 ml in the can, the volume suits full-body colour work as well as smaller repaint jobs on replacement shells or selected sections. Metallic Red gives the surface a brighter, more reflective look than a flat tone, so pressed lines and shaped contours read more clearly once the body is mounted. The spray can format also helps reach recessed areas, wheel arch curves and long side sections with a consistent coat. In a hobby workspace, PS-15 fits naturally into body finishing before decals and final assembly. It can be used when refreshing a well-run shell, matching a replacement body to an existing chassis, or setting a bold colour base for a new RC build. Warning! Not suitable for children under 14 years.
PS spray colours
PS-62 Pure Orange, polycarbonate spray paint
300086062€11.491 l = €114.90
PS-62 Pure Orange is a spray paint developed for decorating transparent polycarbonate bodies used in R/C car modeling. The colour is applied from the inside of the body shell, so the outer surface keeps its smooth finish while the orange tone shows through the clear material during running, display and body detailing. The 100 ml can is sized for finishing a model body and supports additional coats after curing when stronger colour density is required. For application, the spray can is held about 30 cm from the surface, which helps distribute paint across broad roof sections, side panels and tighter curves without pressing the nozzle too close to the shell. After curing, the paint is impervious to oil and fuels. That makes it suitable for gas-powered R/C bodies that are exposed to fuel residue during use. This paint is intended for polycarbonate bodies only and must not be used on plastic models. In a workshop setup, PS-62 Pure Orange suits fresh body finishing, colour changes and replacement shells prepared for track sessions. It also fits detailed livery work where a bright solid base colour is needed before further masking or follow-up coats are added. Warning! Not suitable for children under 14 years.
TS spray colours
TS-19 Metallic Blue Spray Paint, Model Finish
300085019€10.491 l = €104.90
TS-19 Metallic Blue brings a metallic blue semi gloss finish to plastic model surfaces in a 100 ml aerosol format, giving shells, body panels and exterior parts a clean, even colour layer with the visual depth that metallic paint adds under light. The TS paint range is formulated as a special acrylic resin spray, making it suited to hobby finishing where smooth colour application matters across shaped surfaces. The aerosol can supports light, repeated passes over larger sections, which helps maintain a more uniform coat on curved panels, fairings and body contours. The metallic pigment gives the blue tone a brighter, reflective character than a flat colour, while the semi gloss finish keeps the surface short of a full high-shine look. For a glossier result, the product data recommends TS-13 glossy clear coat over the colour layer. The can is labelled for plastic model use and carries 100 ml net volume. This paint suits model car bodies, motorcycle fairings and other plastic kit parts that benefit from even spray coverage and a metallic finish. In a hobby workspace, it fits the stage where assembled or prepared parts move into colour finishing, whether covering a full bodyshell or refreshing selected exterior sections with a consistent blue tone. Warning! Not suitable for children under 14 years.
TS spray colours
TS-2 Dark Green Flat, spray paint, 100 ml
300085002€10.491 l = €104.90
TS-2 Dark Green Flat is a 100 ml spray paint for plastic model surfaces, combining a deep muted green tone with the quick, even application of an aerosol can. On larger shells, body panels or grouped parts, the flat finish reduces shine and gives painted sections a more scale-like appearance under workshop light. This colour belongs to the TS range of special acrylic resin sprays used in model finishing. The spray format helps cover broad areas more uniformly than hand brushing, which is especially useful on curved panels, body shells and repeated parts that need the same tone across the whole build. The dark green shade suits military subjects, utility vehicles and classic colour layouts where a matte surface supports the visual character of the model. The 100 ml fill offers a practical amount for planned paint sessions on plastic components. On the bench, the can suits builders preparing exterior parts before decals and final detailing, or refreshing a single body section in the same colour family. In hobby use focused on plastic kits and RC bodyshells, TS-2 Dark Green Flat adds a controlled sprayed coat that keeps the finish understated while letting panel lines and shapes remain clear. Warning! Not suitable for children under 14 years.
TS spray colours
TS-41 Coral Blue Gloss, spray paint, 100 ml
300085041€10.491 l = €104.90
TS-41 Coral Blue Gloss is a 100 ml spray paint from the TS range, made for model finishing with a bright gloss colour that reads between coral blue and light turquoise on the cap and can marking. The aerosol format lays colour across larger surfaces quickly, which suits body panels, shells and other shaped parts where an even visual flow matters. The paint is identified in the range as TS-41 and belongs to the acrylic resin spray line shown in the safety data sheet as Spezial-Acryl-Harz-Spray TS-Farben. As a ready-to-spray can, it removes the need to decant or mix colour before use and helps keep coverage consistent across repeated passes on matching parts. The gloss finish gives edges, curves and raised details a cleaner light catch than a flat coat, which can make panel lines and colour blocking read more clearly on completed models. The 100 ml fill also gives enough material for multi-part painting sessions or for carrying the same shade across several sections of one build. On a workbench, TS-41 suits full-colour body coverage, contrasting trim sections or standout accent areas that need a vivid gloss tone. The spray-can format also fits builders who want one coded shade ready for touch-ups, repeat projects or coordinated finishing across separate model components. Warning! Not suitable for children under 14 years.
TS spray colours
TS-44 Brillant Blue Gloss, spray paint, 100 ml
300085044€10.491 l = €104.90
TS-44 Brillant Blue Gloss brings a vivid blue gloss finish to plastic model surfaces in a 100 ml aerosol can. The ready-to-spray format suits larger sections where an even colour layer matters, such as bodyshells, fairings or broad exterior panels on scale builds. The TS paint range is described as a special acrylic resin spray, with pigments, binders and solvents in a pressurised can. That composition is built for direct spray application rather than brush work, making it useful when a project calls for continuous colour across curved or recessed shapes. The can is labelled for plastics, which makes it relevant for many model kits and RC bodyshell projects that use formed synthetic parts. The gloss finish adds a reflective surface character to the Brillant Blue shade instead of a flat or satin look. On the bench, TS-44 fits painting stages where a single, consistent colour coat defines the outer appearance of the build. The 100 ml fill gives practical volume for one or more model painting sessions, depending on the size and number of parts being coated. As an aerosol paint, it should be handled according to the stated precautions and used only outdoors or in well-ventilated areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-53 Deep Metallic Blue, spray paint, 100 ml
300085053€10.491 l = €104.90
TS-53 Deep Metallic Blue brings a rich metallic blue tone to model painting in a 100 ml aerosol can, making it well suited to broad, even colour application on hobby surfaces. The semi gloss finish gives the colour a subtle sheen straight from the can, with metallic particles adding visible depth across curved panels and larger sections. This spray belongs to the TS paint range and is described as a special acrylic resin spray for model use. The aerosol format supports fast coverage on parts where brush marks would interrupt the finish, and it suits projects that need a consistent tone across multiple sections. For a glossier final appearance, TS-13 glossy clear coat can be used over the dried colour layer. The paint is supplied in a pressurised can, and the label identifies it as a flammable aerosol for adult modelers only. It fits naturally into body finishing, colour changes, and restoration work on hobby builds where a deep metallic blue is the target shade. Used in light coats across prepared surfaces, the spray can help create an even visual result on shells, panels, and other larger components that benefit from smooth colour coverage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-71 Smoke Transparent Gloss Spray Paint 100ml
300085071€10.491 l = €104.90
TS-71 Smoke Transparent Gloss is a spray paint for model finishing that combines a transparent smoke tone with a gloss surface, making it suited to tinted effects on clear parts and darker visual accents across larger assemblies. The synthetic lacquer formula cures in a short time, so broad surfaces can move on to the next stage without a long wait at the bench. The 100 ml aerosol format is designed for model work where an even coat matters across body shells and other wide sections. One can is stated to cover 2 or 3 car model bodies in 1:24 scale, which gives a practical guide when planning a full paint session. The paint is not affected by acrylic or enamel paints, so different paint types can be used in sequence on the same build. That makes it easier to add smaller colour areas, trim details or highlighted sections after the main smoke coat has been applied and dried. In use, TS-71 suits model car bodies, clear sections and other parts that benefit from a darker transparent finish with gloss depth. It fits neatly into finishing work where the main surface is sprayed first and finer accents are added later with a brush, helping keep large areas smooth while leaving room for precise detail painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-84 Metallic Gold Gloss, spray paint, 100 ml
300085084€24.991 l = €249.90
TS-84 Metallic Gold Gloss is a spray paint for model finishing that combines a metallic gold tone with a glossy surface in a 100 ml aerosol can. The synthetic lacquer formula cures in a short time, which helps move larger painting stages along when body shells, panels or other broad parts need an even coat. The paint is described for large model surfaces, where a spray pattern can cover wide areas more efficiently than brush application. One can is stated as enough to fully cover 2 or 3 car model bodies in 1/24 scale, giving a concrete reference point for planning a full build or a repaint project. The formula is not affected by acrylic or enamel paints, so detail colours can be added after the main coat has been applied and cured. For work with TS-83 Metallic Silver and TS-84 Metallic Gold, the stated recommendation is a base of TS-14 Glossy Black primer. On the bench, this makes TS-84 a strong choice for full body painting, matching separate detail stages to a metallic main colour without changing paint systems mid-build. It suits car bodies, exterior panels and other larger parts where a uniform metallic gloss matters as much as colour depth. The 100 ml format also keeps the paint quantity clear when planning materials for one shell or several 1/24 scale bodies. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-5 Green Gloss, acrylic paint, 23 ml jar
300081005€5.491 l = €238.70
X-5 Green Gloss brings a vivid green tone and a reflective finish to plastic model building, with 23 ml of acrylic paint in a compact jar for detailed colour work at the bench. The glossy surface catches light on selected sections, giving trim, panels and accent areas a cleaner, more defined look once the paint has dried. This paint belongs to the X-Acrylic range and is identified as X-5 Green Gloss, making it easy to match with build notes, colour plans or repeat purchases for the same scheme. The formulation is described for plastic model building, so it fits the finishing stage where separate parts, body sections or small details need a specific colour rather than a broad all-over coat. The jar format keeps the paint ready for measured use during touch-ups, partial repainting or careful brush application on confined areas. The supplied quantity of 23 ml offers enough material for repeated detailing sessions across more than one stage of a build. On military subjects, road cars, sci-fi kits or custom projects, the green gloss shade can be used to pick out selected components, add contrast beside darker tones or sharpen a planned livery. At the workbench, it supports steady progress when a build calls for a bright, polished colour note on visible model surfaces.
XY acrylic colours
X-8 Lemon Yellow Gloss, acrylic paint, 23 ml
300081008€5.491 l = €238.70
X-8 Lemon Yellow Gloss brings a bright yellow tone and a reflective finish to plastic model building, with 23 ml in the jar for brush painting, detail accents and visible color separation on small parts. The acrylic resin paint is intended for model work where crisp placement and a glossy surface help trim lines, panels and highlighted sections read clearly. The formulation is a liquid mixture of binders, pigments and solvents. The safety data identifies it as flammable liquid category 3 with a flash point of 31 to 33 °C, and the paint has a density of 1.0 g/ml at 23 °C. Solvent content is stated as 50 to 60%, with partial water solubility noted for the solvent portion. The boiling range is 80 to 120 °C, and the liquid has an alcohol-like odor. These technical details place X-8 within a workshop painting setup where measured handling and controlled ventilation matter during model finishing. On the bench, the 23 ml jar suits repeated use across body details, accessories and small exterior sections that need a strong yellow gloss. It fits focused painting sessions for scale kits, touch-up work on existing builds and careful color application on parts that benefit from a smooth, light-catching surface.
XY acrylic colours
XF-22 RLM Flat Grey, acrylic paint, 23 ml
300081322€5.491 l = €238.70
XF-22 RLM Flat Grey is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the exact shade name RLM Flat Grey. The flat finish gives painted surfaces a subdued look that suits scale subjects where gloss would appear out of place, whether the work focuses on aircraft panels, vehicle fittings or small accessory parts. The XF designation places this colour within Tamiya's acrylic paint range, making it a straightforward choice when a build calls for a specific grey rather than a general neutral tone. The 23 ml volume fits regular bench use, with enough paint on hand for detail work, corrections and matching separate sections within the same scheme. On smaller components, a defined colour like XF-22 helps keep visual consistency between main surfaces and secondary parts that are painted at different stages. This shade works well in painting sessions that move between broad base areas and finer accents, especially when a model includes recessed details, edges and add-on parts that benefit from a non-gloss finish. Kept alongside other modelling colours and tools, XF-22 RLM Flat Grey serves as a dedicated reference shade for repeat builds, touch-ups and careful finishing work.
XY acrylic colours
XF-23 Flat Light Blue, acrylic paint, 23 ml
300081323€5.491 l = €238.70
XF-23 Flat Light Blue is an acrylic paint in a 23 ml jar, made for adding a flat light blue finish to scale models and related hobby work. The matte character of the colour suits surfaces where a low-sheen look keeps panel shapes, edges and small moulded details clearly visible during painting and after drying. The 23 ml quantity gives a practical amount for repeated brush sessions on smaller assemblies, detail zones and colour corrections. Flat Light Blue can be used where a build calls for a pale blue tone on body sections, interior areas, accessories or scenic elements, depending on the subject being finished. The jar format keeps the paint contained between sessions and supports measured use when only a small amount is needed on the brush. As an acrylic paint, it fits hobby workflows that focus on controlled coverage, edge definition and gradual colour build-up on model parts. On the workbench, the shade can be applied to trim, panels or accent areas that benefit from a calm, muted blue rather than a glossy finish. It also suits ongoing projects where a stored colour needs to be reopened later for touch-ups, matching adjacent sections or refining painted details with the same tone.
XY acrylic colours
XF-27 Flat Black Green, acrylic paint, 23 ml
300081327€5.491 l = €238.70
XF-27 Flat Black Green is a 23 ml acrylic paint for model finishing, bringing a subdued dark green tone to brush-applied details, small panels and carefully controlled colour work. The flat finish keeps the surface visually restrained, which suits technical subjects, military schemes and parts that need a muted rather than reflective look. The XF designation identifies this shade within the acrylic paint range, making it easier to match repeat applications during a longer build or later touch-up work. The 23 ml jar size gives a practical amount for detail sessions, small-area coverage and mixing into established paint routines without taking up much bench space. Flat Black Green can be used where darker green accents, equipment sections or weathered colour transitions are needed. The compact jar format also supports measured paint use during careful finishing steps. On the workbench, this paint fits naturally into projects that move between base colours, detail passes and final surface refinement. It also works well for keeping a consistent dark green note across separate assemblies, replacement parts or later corrections on an existing model.
XY acrylic colours
XF-51 Flat Khaki Drab, acrylic paint, 23 ml
300081351€5.491 l = €238.70
XF-51 Flat Khaki Drab is an acrylic paint for model finishing, supplied in a 23 ml jar for repeated bench use across detail work, touch-ups and full colour sections. The flat khaki drab tone gives military subjects and equipment parts a restrained surface look that avoids shine and keeps the finish visually consistent on scale builds. The acrylic format suits careful brush application on smaller components, edges and recessed areas where colour control matters. A 23 ml volume gives enough paint for ongoing workshop use while keeping the shade easy to store with other modelling supplies. The XF-51 designation also helps builders return to the same colour quickly when extending a scheme across separate sessions or matching later additions on the same project. On the workbench, this paint suits camouflage sections, stowage details, interior parts and field equipment accents where a muted drab tone is needed. It also works well for correction passes after assembly or for refining individual areas without repainting an entire model.
XY acrylic colours
XF-55 Flat Deck Tan, acrylic paint, 10 ml
300081755€3.591 l = €359.00
XF-55 Flat Deck Tan is an acrylic paint for model building work, supplied in a 10 ml jar and listed as Light Brown in the product data. The muted tan tone suits projects that call for a restrained, practical colour rather than a bright finish, whether the aim is painting equipment details, adding contrast to panels or refining smaller sections on a build. The acrylic formula makes this paint a useful choice for controlled application on scale parts where neat edges and measured coverage matter. Its compact 10 ml size fits naturally into a modelling paint range, keeping colour selection focused for touch-ups, detail painting and smaller finishing jobs. The shade name Flat Deck Tan points to a flat, non-gloss appearance, which helps maintain a subdued look on surfaces intended to read as worn, functional or understated. At the workbench, this colour can be used during a fresh build, a repaint or later correction work on assembled models and accessories. It also suits sessions where several tones are combined across one project, with Light Brown adding a calm, grounded note beside darker, metallic or camouflage-oriented colours.
XY acrylic colours
XF-58 Flat Olive Green, acrylic paint, 10 ml
300081758€3.591 l = €359.00
XF-58 Flat Olive Green brings a muted matt olive tone to scale painting work, with a 10 ml jar size that suits detail sessions at the bench and careful colour placement on smaller parts. The acrylic brush paint format supports controlled coverage on accessories, equipment pieces and surface sections where a flat finish helps the painted area sit naturally beside weathering and panel detail. The safety data identifies XF-58 as a liquid paint with an alcohol odour, a density of about 1.2 g/mL at 23 °C and a flash point of 33 °C. It is classified under CLP as Flam. Liq. 3, Eye Irrit. 2, Acute Tox. 4 by inhalation and STOT SE 3. The label therefore calls for use in well-ventilated areas, away from heat, sparks and open flames, with protective gloves and eye protection. The container should be kept tightly closed and stored in a cool, ventilated place. On military subjects, stowage parts and field accessories, the flat olive green shade gives a subdued painted look rather than a glossy coat. The 10 ml volume also fits neatly into colour rotation for touch-up work, small-area repainting and finishing passes on model details where only a measured amount is needed. This paint is intended for model-making use and should be handled with the same care as other flammable hobby coatings.
XY acrylic colours
XF-62 Flat Olive Drab, acrylic paint, 10 ml
300081762€3.591 l = €359.00
XF-62 Flat Olive Drab is an acrylic paint for model finishing, supplied in a 10 ml jar for compact bench storage and controlled use during detail painting. The flat color tone gives painted surfaces a non-gloss appearance that suits subdued military schemes, field equipment accents and parts that call for a worn, service-style look. The XF designation identifies this specific shade within the acrylic paint range, making it easier to match repeat work across separate builds or later touch-ups. A 10 ml volume fits neatly into paint racks, drawers and hobby cases without taking much space on the workbench. The small jar format also helps when only selected panels, accessories or edge details need color rather than full-surface coverage. The olive drab tone works well where a muted green-brown finish is needed for scale realism. On the bench, this paint suits careful brushwork on accessories, body details and small model sections that benefit from a flat finish. It also serves well for correction work after assembly or for adding tonal variation to selected areas, keeping the painting process focused and easy to manage in shorter hobby sessions.
XY acrylic colours
XF-67 Flat NATO Green, acrylic paint, 23 ml
300081367€5.491 l = €238.70
XF-67 Flat NATO Green brings a military-style colour tone and a flat surface effect to scale modelling work, with 23 ml of acrylic paint supplied for controlled coverage on parts, panels and smaller painted sections. The muted finish suits subjects that call for a non-glossy appearance, helping camouflage layouts and field equipment details read with the restrained look often associated with service vehicles. The acrylic formula makes this paint a useful choice for careful colour placement on model components where edges, recesses and smaller areas need a defined shade rather than broad decorative coverage. The XF-67 designation also helps keep colour selection consistent across repeat builds, matching sessions or later touch-up work when the same tone is needed again. In a paint rack or work area, the 23 ml jar size fits neatly into regular hobby use while still providing enough material for multiple passes on selected assemblies. On armoured vehicles, support equipment or military-themed accessories, Flat NATO Green can be used to establish base colour areas, refine smaller details or restore worn spots after handling during a build. It also suits bench sessions where several subassemblies are painted separately and then brought together once the colour work is complete.
XY acrylic colours
XF-69 Flat NATO Black, acrylic paint, 23 ml
300081369€5.491 l = €238.70
XF-69 Flat NATO Black is an acrylic paint for model finishing, supplied in a 23 ml jar that fits neatly into a bench setup and keeps a frequently used dark military shade close at hand. The flat finish gives painted sections a subdued surface appearance, which suits vehicles, accessories and structural details where a non-gloss look is part of the intended result. This shade works especially well when a build calls for controlled dark coverage rather than reflective contrast. The acrylic formula supports careful application on smaller parts, panel sections and detail areas, making it useful for touch-ups as well as broader colour blocking within a paint scheme. The 23 ml quantity offers enough material for repeated use across multiple painting stages while remaining easy to store alongside other workshop colours. The jar format also helps with measured paint pickup during brush work on edges, recesses and raised moulded features. On the workbench, XF-69 Flat NATO Black suits military subjects, equipment details and finishing passes that need a restrained dark tone. It also serves well when refreshing previously painted sections or adding visual separation between neighbouring components in a scale build.
XY acrylic colours
XF-79 Linoleum Deck Brown, acrylic paint, 10 ml
300081779€3.591 l = €359.00
XF-79 Linoleum Deck Brown is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a flat brown tone that reads with a muted, non-gloss surface. The color suits areas where a restrained finish matters visually, such as deck sections, worn panels or small details that need contrast without shine catching the light. The paint is identified as XF-79 and described as Linoleum Deck Brown Flat, making it easy to place within an existing color range when a build calls for a specific brown rather than a general earth shade. The 10 ml volume supports careful, repeated application across detail stages instead of committing a large container to a narrow color task. In the safety data, the paint is listed as liquid, brown in color and alcohol in odour, with a density of about 1.2 g/mL at 23 °C. The stated flash point is 33 °C. On ship models, military subjects or diorama sections, this shade can be used to separate walking surfaces, deck coverings or equipment panels from surrounding greys, metals and wood tones. At the bench, the small jar format keeps the paint close at hand for touch-ups, edge work and other finishing passes where color control matters as much as coverage.
XY acrylic colours
XF-8 Flat Blue, acrylic paint, 10 ml jar
300081708€3.591 l = €359.00
XF-8 Flat Blue is an acrylic paint for model work, supplied in a 10 ml jar and identified by the XF-8 shade code. The flat blue finish suits surfaces that call for a non-gloss colour layer, whether the aim is full coverage on a body section or careful colour placement on smaller parts. The supplied safety data identifies this paint as a liquid with an alcohol odour and a blue colour. It lists a boiling range of 82.4 to 174 °C, a flash point of 33 °C and a density of 1.2 g/mL at 23 °C. The same document states a VOC content of 30 Gew-%. For handling, the safety data specifies use in well-ventilated areas and storage in a tightly closed container in a cool, well-ventilated place. The jar format keeps the paint quantity focused for hobby benches where multiple colours are kept within reach. In practical use, this shade fits model painting sessions that move between broader panels, smaller trim sections and later touch-up work. The 10 ml content also makes it easy to keep a specific blue ready for repeat coats, colour corrections or matching details across separate stages of a build.
XY acrylic colours
XF-80 Flat British Navy Gray, acrylic paint
300081780€3.791 l = €379.00
XF-80 Flat British Navy Gray is an acrylic paint for model finishing, supplied in a 10 ml jar for controlled use on smaller painting jobs and detail-focused colour work. The flat finish gives surfaces a muted, non-gloss appearance that suits military, naval and other scale subjects where a subdued colour tone is part of the final look. The acrylic formula supports careful application across panels, structures and smaller moulded details, making it useful for both broader coverage and targeted corrections. British Navy Gray adds a distinct, service-style shade that can help separate equipment sections, highlight surface features or refine the overall colour balance of a build. The 10 ml content also fits neatly into ongoing workshop use, where matching an existing scheme or completing final finishing steps often calls for a compact paint jar rather than a larger container. On the bench, XF-80 works well for repainting selected areas, adding a uniform flat coat to individual sections or completing detail passes near the end of a build. It also suits stored paint collections where clearly identified shades are kept ready for future model projects and later touch-up work.
XY acrylic colours
XF-92 Yellow-Brown DAK 1941, acrylic paint
300081792€3.791 l = €379.00
XF-92 Yellow-Brown DAK 1941 is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a flat military shade. The muted Yellow-Brown tone suits armour subjects, equipment details and scene elements where a low-sheen surface is needed instead of a reflective coat. Within the XF acrylic range, this colour supports controlled brush work on smaller sections and measured application across larger painted areas. The DAK 1941 designation places the shade in a historical military context, making it useful for period-correct camouflage, dust-toned panels and field equipment details. The flat finish helps keep the painted result visually restrained, especially on surfaces that call for worn, service-style colour treatment rather than gloss. The compact 10 ml format also fits neatly into a bench setup where several reference colours are used side by side. On a tank hull, supply crate, tool handle or diorama ground detail, XF-92 can be used to build subtle contrast against darker browns, sand tones and green accents. It also works well for touch-up passes after masking or for refining edges and smaller raised sections during the painting stage.
Polish, cleaners, aging materials
Applicator Cloth Set, model polishing cloths
300087090€19.99
This applicator cloth set brings controlled polishing to plastic model building with 3 soft microfiber cloths sized at 260 x 190 mm. The ultra-fine fabric is intended for use with polishing compound and modeling wax, helping distribute finishing material smoothly across body shells, painted panels and other delicate surfaces while keeping the cloth easy to fold and guide by hand. The set contains 1 blue, 1 pink and 1 white cloth, a practical layout for separating different grades of compound during the finishing process. That color split helps keep coarse, fine and final polishing stages distinct instead of carrying residue from one step into the next. The delicate weave also suits transparent parts, where surface clarity matters just as much as gloss on painted sections. On canopies, windows and light covers, the cloth supports careful hand work with less risk of visible marks from rougher wiping materials. Used at the bench after paint has cured, the cloths fit both broad passes over larger panels and tighter work around edges or molded details. Folded into smaller sections, each cloth can be rotated to a fresh area during longer polishing sessions, keeping the contact surface clean as the finish develops toward a mirror-like result. Warning! Not suitable for children under 14 years.
AS spray colours
AS-16 Flat Light Grey, spray paint, 100 ml
300086516€12.291 l = €122.90
AS-16 Flat Light Grey brings a matt light grey aircraft colour into a 100 ml aerosol can, giving model builders a ready spray format for broad, even coverage on scale surfaces. The spray action applies paint through the nozzle rather than by brush, which suits wings, fuselage panels and other larger sections where a uniform coat matters. The shade is identified as Flat Light Grey USAF, making it a specific colour choice within aircraft finishing rather than a general workshop paint. The can is labelled as an aerosol paint and the safety data identifies the contents as light grey in colour. This format supports model work that calls for consistent surface tone across multiple adjoining parts. On aircraft builds, that can mean laying down a base colour, refining panel areas or matching surrounding sections during finishing work. Used at the painting stage of a scale build, the aerosol format fits sessions where separate parts are coated before final fitting or where assembled airframes need an overall colour pass. The 100 ml volume gives a practical amount for repeated hobby use across more than one painting session. Warning! Not suitable for children under 14 years.
AS spray colours
AS-18 Flat Light Grey, spray paint, 100 ml
300086518€12.291 l = €122.90
AS-18 Flat Light Grey (IJA) is a 100 ml spray paint designed for model finishing where an even, subdued grey tone is needed across larger painted areas. The flat finish keeps surfaces non-glossy, which suits subjects that call for a restrained, service-style appearance rather than a reflective coat. The spray format helps distribute paint in a fine, consistent layer over broad sections and shaped parts that are harder to cover cleanly with a brush alone. On aircraft bodies, panels or similar model components, that can help maintain a more uniform colour impression from edge to edge. The AS-18 code also gives builders a clear reference point when following paint guides, planning a specific scheme or returning later for matching work on the same build. The shade name Flat Light Grey (IJA) identifies the intended colour directly, which helps keep finishing steps organised during multi-colour projects. Used during the painting stage of a scale build, this spray suits base coating, full-surface coverage or targeted recolouring of selected sections. In a workshop setup with masking, primed parts and drying space prepared, the 100 ml can supports controlled application across multiple model components in one painting session. Warning! Not suitable for children under 14 years.
AS spray colours
AS-20 Flat Insignia White, spray paint, 100 ml
300086520€12.291 l = €122.90
AS-20 Flat Insignia White is a spray paint for aircraft models, supplied in a 100 ml aerosol can for broad, even colour application. The flat white tone suits schemes that call for a matt surface, giving model aircraft a clean, uniform finish across wings, fuselage sections and other larger panels. The aerosol format changes how the paint reaches the surface: instead of brush contact, the nozzle releases a fine mist that settles across the model in a thin layer. That makes it useful for covering larger areas where visible brush marks would interrupt the look of the build. The can is part of the Tamiya Color range for aircraft, so the paint sits clearly within aircraft-focused finishing work rather than general craft use. The shade name Flat Insignia White (USN) gives a specific reference point for colour planning on naval aircraft subjects and related markings. On the bench, the 100 ml volume supports more than a single pass, whether the task is laying down a main coat, refreshing a section after masking, or matching white areas across several aircraft builds. The compact can stores easily with other finishing supplies and is ready for use whenever a model calls for a smooth matt white application.
AS spray colours
AS-26 Flat Light Ghost Grey, spray paint, 100 ml
300086526€12.291 l = €122.90
AS-26 Flat Light Ghost Grey is a spray paint for model finishing, supplied in a 100 ml can and formulated for quick, even colour application across exterior surfaces. The flat finish gives painted parts a muted look, making it suited to builds that call for a low-sheen grey rather than a reflective coat. The spray format helps cover broad sections such as fuselage panels, body shells or other outer parts with a more uniform layer than hand brushing can usually achieve on large areas. Flat Light Ghost Grey works well where a cool, restrained tone is needed for military, aircraft or technical styling, and the matte surface keeps visual emphasis on panel lines, contours and added detail rather than gloss. The can format also makes it practical to apply several light passes during the painting process, which supports controlled coverage on shaped model surfaces. During a build or repaint session, the 100 ml volume gives useful capacity for base coating, follow-up passes and small correction work on separate components. It fits naturally into finishing stages where colour consistency across multiple parts matters, whether the goal is a fresh overall coat or matching previously painted sections on a scale model.
Lacquer colours
LP-53 Clear Orange Gloss, paint, 10 ml
300082153€3.491 l = €349.00
LP-53 Clear Orange Gloss is a 10 ml paint for model finishing that lays down a transparent orange tint with a glossy surface. The clear colour effect keeps underlying moulded detail, panel lines or base tones visible while shifting the final appearance toward a warm orange hue, which makes it useful where a solid coat would cover too much. The shade suits small parts and focused colour placement on scale builds. Clear orange can be used on lenses, indicators, light covers or selected accent areas where a translucent finish is needed rather than an opaque block of colour. The 10 ml jar size also makes the paint easy to organise alongside other modelling colours and practical for controlled use on smaller sections, touch-ups or repeat passes during a finishing session. On the workbench, LP-53 fits projects that call for tinted gloss effects, from vehicle details to custom highlights on separate components. It also works well when a build needs a transparent colour layer that changes the tone of the surface while leaving fine structure readable underneath.
Lacquer colours
LP-57 Red Brown 2 Flat, lacquer paint, 10 ml
300082157€3.491 l = €349.00
LP-57 Red Brown 2 Flat brings a muted lacquer colour into model finishing with a 10 ml jar size that suits focused paint work on smaller sections and detail areas. The flat surface effect keeps reflections low, giving painted parts a restrained look that fits subjects where a gloss coat would feel out of place. As part of the LP paint range, this shade adds another controlled colour option for builders working across body sections, cockpit parts, accessories or scenery details. The jar format stores neatly on the workbench and supports measured paint use when only a small amount is needed at a time. The colour name Red Brown 2 points to an earth-based tone that can be used to separate visual zones, pick out individual components or build up layered finishing work across a project. On the bench, this paint suits careful brush work, touch-up passes and other finishing stages where compact paint volume is more practical than a larger container. The 10 ml content also makes it easy to keep a specific shade on hand for repeat corrections, added detail or later refinement during a model build.
Lacquer colours
LP-65 Rubber Black Flat, lacquer paint, 10 ml
300082165€3.491 l = €349.00
LP-65 Rubber Black Flat brings a dedicated rubber tone to scale painting, combining a flat black base with a slight blue tint that suits tyres, military road wheels and other parts meant to read as rubber rather than plain black. The 10 ml bottle keeps the colour ready for focused bench work, whether the task is picking out a single wheel set or finishing repeated details across a larger build. The lacquer formula works across 2 common application methods: brush painting for edges and small parts, and airbrushing for broader coverage on grouped components. Once applied, it forms a tough membrane that can serve as a basecoat under enamel paints, which helps when a build calls for layered weathering or additional painted detail. Fast drying supports a steady painting rhythm between coats and reduces waiting time during longer finishing sessions. A dedicated thinner is available for painters who want to adapt flow and handling to the chosen technique. With bottle dimensions of 44 mm in height and 35 mm in width, LP-65 fits the same stand format used for the Tamiya Color Acrylic Paint Mini series. On the workbench, that shared footprint helps keep mixed paint ranges organised while wheel sets, suspension parts and other dark-finished components move through the painting stage.
Lacquer colours
LP-7 Pure Red Gloss, lacquer paint, 10 ml
300082107€3.491 l = €349.00
LP-7 Pure Red Gloss is a lacquer paint for scale modelling, supplied in a 10 ml jar and formulated for a bold red finish with a glossy surface. The Pure Red tone gives body sections, trim pieces and small accessories a bright, defined colour presence that reads clearly on display models and working builds alike. Within the LP-Paint range, this shade is suited to jobs where a clean red layer matters more than a muted or weathered effect. The gloss surface reflects light across edges and contours, which helps shaped parts, raised details and panel lines remain visually distinct after painting. The compact 10 ml content also makes the jar easy to place into a bench setup built around selective colour use, touch-up work or smaller painted sections rather than large-volume coverage. On a model car body, LP-7 can be used to pick out mirrors, trim or accent panels; on accessories and separate components, the same colour can tie scattered details into one consistent scheme. The strong red tone also suits display pieces that need a crisp, freshly finished look, whether the focus is a single highlighted part or a broader colour theme across several assembled sections.
Lacquer colours
LP-79 Flat Red, lacquer paint, 10 ml jar
300082179€3.491 l = €349.00
LP-79 Flat Red is a lacquer paint for plastics supplied in a 10 ml jar, bringing a muted red tone to scale modelling work where a flat surface finish suits the subject. The liquid formula is intended for controlled application on smaller sections, from trim and interior parts to accent areas that benefit from a non-gloss appearance. The paint mixture contains pigments and binders in solvents, giving it the working characteristics associated with lacquer paints on plastic components. In the safety data, the colour is identified as red and the material is described as practically insoluble in water, which makes it suited to solvent-based modelling workflows rather than water-thinned paint routines. LP-79 is listed under the LP paint range and can be used where a matte red shade is needed to separate details, block in colour areas or refine a finished model with more subdued contrast. On the bench, a 10 ml jar size fits touch-up work, detail painting and smaller repeated jobs without taking much space among other modelling supplies. The paint is classified as flammable and should be used in well-ventilated areas, with the container kept away from heat and ignition sources during handling and storage.
Lacquer colours
Paint Retarder Lacquer 40ml, paint additive
300087198€5.791 l = €144.75
Paint Retarder Lacquer 40 ml is a lacquer paint additive that slows drying so the paint has more time to flow out on the surface. In model finishing, that longer open time helps the coat settle more evenly across panels, body shells and other detailed parts where streaks or patchy gloss can stand out under light. The formula is intended for use with lacquer paints, and the label states a maximum mixing ratio of 10% retarder to paint. The liquid is clear and comes in a square glass bottle with a ribbed screw cap that supports measured dispensing in small quantities. The safety data lists a density of 0.94 g/ml at 20 °C, a flash point of 67 °C and a boiling range of 174 to 188 °C. It is slightly soluble in water and should be handled with adequate ventilation. The label also states that the cap should be closed tightly after use and that the contents must be kept away from heat, sparks and open flames. On a workbench, the additive fits naturally into paint mixing before brush painting or airbrushing small model sections, especially where a smoother laid-down coat matters. It also suits finishing sessions that focus on glossy surfaces, trim parts or other areas where controlled flow and a more even sheen are the goal. Warning! Not suitable for children under 14 years.
PS spray colours
PS-3 Light Blue, polycarbonate spray paint
300086003€10.991 l = €109.90
PS-3 Light Blue is a spray paint for polycarbonate model surfaces, giving RC bodyshell projects a dedicated colour coat in a 100 ml aerosol format. The light blue shade brings a crisp, clean look to clear shells, whether the aim is a full single-colour body or a base for a more detailed racing livery. The formula is specified for polycarbonate, a key detail for shells that flex in use and need the right type of coating. The aerosol format helps distribute paint in smooth passes over broad roof sections, curved fenders and tighter body lines. On clear bodyshells, controlled coats make it easier to build colour gradually and keep the finish consistent across the shell. The compact can size also fits neatly into hobby bench setups where several colours may be used across one project. PS-3 Light Blue suits fresh body builds, replacement shells and repaint work on existing RC projects. It can be used when adding a clean race look, matching a colour theme across several vehicles or finishing a shell before decals and final detailing. This makes the spray a practical choice for modelers who want a dedicated polycarbonate colour in an easy-to-handle can. Warning! Not suitable for children under 14 years.
PS spray colours
PS-4 Blue Polycarbonate Spray Paint, 100 ml
300086004€10.991 l = €109.90
PS-4 Blue brings a bold colour finish to polycarbonate model work in a 100 ml spray can, with a formula made specifically for that material. On clear RC bodyshells and other polycarbonate parts, the aerosol format helps cover wide curves and recessed sections with a steady pass, so the colour reads cleanly across the shape once the shell is mounted. The can is part of the PS paint range for polycarbonate, making it suited to hobby builds that need a material-specific coating rather than a general craft spray. The dark blue cap gives a quick visual reference for the shade before painting starts. Aerosol delivery also suits larger shell sections where brush painting would leave visible transitions across long panels or roof areas. Used on the inside of a clear bodyshell, this type of paint supports the crisp, protected colour finish commonly chosen for RC car bodywork. The 100 ml content gives a practical amount for single-shell projects and touch-up work within the same colour family. On the workbench, PS-4 Blue fits naturally into body preparation, livery updates and repaint sessions for polycarbonate shells. It also works well when a fresh colour scheme needs to be matched across replacement bodyshells, spare panels or a second racing shell kept ready for the next run. Warning! Not suitable for children under 14 years.
PS spray colours
PS-45 Translucent Purple, spray paint, 100 ml
300086045€10.491 l = €104.90
PS-45 Translucent Purple is a spray paint for polycarbonate model bodies that combines a see-through purple tone with the fast coverage of an aerosol can. The translucent effect leaves moulded lines, window areas and layered design work visible, giving custom shells a coloured finish that still shows the structure underneath. The 100 ml can is sized for hobby paint work and suits broad passes over larger panels as well as shorter bursts around tighter curves and edges. As a polycarbonate paint, it is intended for shells and similar parts in that material rather than general household surfaces. The translucent colour opens up finishing options that opaque shades cannot deliver, especially where lighting effects, smoked sections or multi-layer colour schemes are part of the design. Several light coats can be used to deepen the purple tone while keeping the finish visually clear. On an RC bodyshell, PS-45 can be used for tinted window sections, accent panels or full-body colour treatments that need depth rather than a solid block of colour. It also fits display-focused model projects where the shell shape, panel lines and graphic layout should remain visible through the final coat. Warning! Not suitable for children under 14 years.
PS spray colours
PS-6 Yellow, spray paint, polycarbonate 100 ml
300086006€10.991 l = €109.90
PS-6 Yellow is a 100 ml spray paint developed for polycarbonate model surfaces. The aerosol format lays colour across broad curves and shaped sections with a continuous mist, which helps when covering RC bodyshell contours, roof sections and side panels in one consistent tone. The paint is specified for polycarbonate, so it matches the material used on many clear RC car bodies and other formed model parts. That material-specific use is the key detail in finishing work, because the paint choice needs to fit the surface rather than simply the colour plan. Yellow gives strong visual contrast for full body schemes, racing accents or layered custom graphics. The can format also suits masking work, where broad sprayed areas form the base before additional colours or details are added. Content is 100 ml. On the bench, PS-6 Yellow fits naturally into RC body painting sessions, whether the goal is a single-colour shell or a brighter section within a multi-colour livery. It also works for refreshing replacement bodyshells or starting a new custom look on polycarbonate parts used in model driving projects. Warning! Not suitable for children under 14 years.
PS spray colours
PS-61 Metallic Orange, spray paint, 100 ml
300086061€11.491 l = €114.90
PS-61 Metallic Orange brings a vivid metallic finish to model painting in a 100 ml spray format that suits broad, even coverage across shells and larger exterior sections. The ready-to-spray can supports fast application with continuous passes, so curved panels, edges and open surface areas can be coated with a more uniform visual effect than hand brushing alone. The metallic pigment gives the orange tone a reflective character that changes with the angle of light, adding extra presence to bodywork, trim sections and colour accents. Used as part of a model finishing setup, the spray format helps keep the coat visually consistent across connected surfaces where mismatched texture can distract from the final look. The 100 ml content offers a practical amount for painting sessions that involve full exterior coverage or repeated colour work on matching components. On the bench, PS-61 Metallic Orange suits custom paint schemes, refresh work and bold contrast sections on model projects. It can be used when a build calls for a brighter body colour, a metallic highlight or a strong visual break between adjacent painted areas. Warning! Not suitable for children under 14 years.
PS spray colours
PS-63 Bright Gun Metal, polycarbonate spray paint
300086063€12.491 l = €124.90
PS-63 Bright Gun Metal is a 100 ml spray paint developed for polycarbonate RC bodyshell work, bringing a metallic grey finish to clear shells used in racing and custom builds. The spray format helps cover broad curved sections quickly while still reaching tighter moulded details such as vents, recesses and body contours. Used on the inside of a clear polycarbonate shell, the colour shows through the material with a smooth, even appearance that suits modern touring cars, competition-inspired liveries and darker custom schemes. The Bright Gun Metal shade works well for full-body coverage or for selected sections such as roof panels, bonnet areas and trim details. A spray application also avoids the streaking that can appear with brush painting on large curved surfaces. The 100 ml can size gives a practical amount for shell painting tasks where consistent colour across multiple sections matters. On the bench, PS-63 fits naturally into body finishing sessions focused on masking, layered colour placement and clean separation between painted areas. In running or display setups, the metallic grey tone gives RC bodyshells a technical, motorsport-led look that reads clearly under indoor light and outdoor daylight. Warning! Not suitable for children under 14 years.
TS spray colours
TS-11 Maroon Gloss, spray paint, 100 ml
300085011€10.491 l = €104.90
TS-11 Maroon Gloss brings a deep maroon tone and a gloss surface to plastic model parts in a 100 ml spray can, making it well suited to larger exterior sections where an even finish matters. The aerosol format lays colour across broad areas in a continuous pass, creating a clean visual result on body shells, panels and other shaped surfaces. This special acrylic resin spray is specified for plastics and is intended for hobby finishing work rather than brush detail painting. The label guidance calls for light coats applied from 25 to 30 cm, a method that helps colour build gradually across contours and edges. Shaking the can vigorously before use supports an even mix in the spray. After painting, clearing the nozzle with a brief upside-down spray helps keep the can ready for the next session. The gloss maroon shade suits projects that call for a rich, polished body colour. On the bench, the can fits painting stages where separate parts are prepared, coated and left to dry between passes. Use in well ventilated areas is required, and the aerosol should be kept away from heat and open flames during handling and storage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-16 Yellow Gloss, spray paint, 100 ml
300085016€10.491 l = €104.90
TS-16 Yellow Gloss is a 100 ml spray paint for model finishing, supplied in an aerosol can and specified as a special acrylic resin spray. The gloss yellow colour is suited to broad exterior sections where an even coat and consistent surface appearance matter across the whole painted area. The formula is identified for plastics on the can, making it a practical choice for many model bodies and formed parts that benefit from spray application rather than brush painting. Aerosol delivery helps cover larger panels in a continuous pass, which is useful when matching colour across curved shells, body sides or other wide surfaces. The safety data identifies the contents as a pressurised aerosol mixture with binders, pigments and solvents in a propellant pack. The can carries flammable and irritant hazard warnings, and the documentation states storage below 50°C as well as use in well-ventilated areas. On the workbench, TS-16 Yellow Gloss fits painting sessions that focus on clean, full-surface colour application for scale models and hobby parts. It also works well when a bright gloss yellow tone is needed for body sections, accent panels or coordinated finishing across several compatible components. Warning! Not suitable for children under 14 years.
TS spray colours
TS-18 Metallic Red, spray paint, 100 ml
300085018€10.491 l = €104.90
TS-18 Metallic Red is a spray paint for model finishing that brings a vivid metallic tone to plastic surfaces in a semi gloss finish. The aerosol format lays colour across larger sections quickly, making it useful for body panels, exterior shells and separate detail parts where an even coat matters. The can contains 100 ml and is part of the TS paint range described as a special acrylic resin spray. That paint type suits model work where shaped parts, edges and recessed lines need full coverage without heavy brush texture. Metallic Red gives the surface a brighter, light-catching look than a flat colour, while the semi gloss sheen keeps the finish controlled rather than mirror bright. When a higher shine is wanted, TS-13 glossy clear coat 300085013 can be applied over the colour layer for a glossier final surface. This paint fits finishing sessions where plastic components are prepared, coated in light passes and left with a uniform metallic appearance across matching parts. It also works well for refresh projects, custom colour schemes and replacement panels that need to match the same TS-18 shade across the build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-32 Haze Grey Flat, spray paint, 100 ml
300085032€10.491 l = €104.90
TS-32 Haze Grey Flat brings a muted grey tone and a matte surface to plastic model work in a 100 ml aerosol can. The spray format helps cover larger sections evenly, whether the task is a body shell, exterior panel or accessory part that needs a uniform colour without visible brush texture. This TS paint is identified as a special acrylic resin spray and is made for plastics, making it a practical match for scale model finishing. Light coats can be built up gradually, and the can is intended to be shaken vigorously before use for an even spray pattern. The visible usage guidance recommends a spraying distance of 25 to 30 cm and allowing drying time between coats, which helps maintain a clean surface on detailed parts. The flat Haze Grey shade works well where a non-gloss appearance suits military, industrial or understated road-car styling on model subjects. On the bench, the aerosol can suits builders who want quick colour coverage across multiple parts in one session. It also fits touch-up or finishing work on plastic assemblies where a consistent matte grey helps separate body sections, trim pieces or add-on details from glossier painted areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-5 Olive Drab 1, spray paint, 100 ml
300085005€10.491 l = €104.90
TS-5 Olive Drab 1 is a 100 ml spray paint for model finishing, combining a flat surface effect with broad aerosol coverage for clean, even colour on plastic parts. The muted Olive Drab 1 shade suits military subjects and utility equipment, giving panels and shaped sections a restrained, non-gloss appearance that reads convincingly once the coat has settled. This TS paint is identified in the data as a special acrylic resin spray and is presented for plastics, making it a focused choice for model builders working on shells, bodywork, accessories or scenery parts. The aerosol format helps carry colour into recessed lines, curved edges and larger uninterrupted areas where brush marks can interrupt the finish. A 100 ml fill offers enough paint for repeated light coats across multiple sections of a build, which is useful when colour depth needs to be built gradually. The flat character of the finish also supports weathered, service-use or field-applied looks where a reflective surface would not fit the subject. On the bench, TS-5 Olive Drab 1 fits projects that need a uniform base coat before detail painting, decals or further finishing steps. It also works well when separate components such as fuel cans, stowage pieces or exterior panels need the same consistent tone across the whole build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-7 Racing White Gloss Spray Paint, 100 ml
300085007€10.491 l = €104.90
TS-7 Racing White Gloss brings a bright gloss white tone to model finishing in a spray-can format built for broad, even application. The 100 ml aerosol format suits hobby benches where clean colour coverage across plastic parts, body panels and shaped surfaces matters as much as the final shade. This paint belongs to the TS range of special acrylic resin sprays and is intended for adult modelers. The can is marked for plastics, making it a focused choice for plastic model kits and similar hobby assemblies. Aerosol delivery helps lay colour across wider sections without brush marks, which is especially useful on curved shells, fairings and larger exterior panels. Racing White Gloss also works where a uniform sheen is needed to match motorsport-inspired liveries, clean bodywork or high-contrast trim areas. The compact can size fits neatly into regular workshop storage while still offering enough paint for focused finishing tasks. On the bench, TS-7 suits projects that need a crisp white base coat, a full gloss body colour or careful repainting of selected sections. It also fits builders who keep a dedicated shade ready for repairs, replacement parts or fresh exterior detailing on plastic models. Warning! Not suitable for children under 14 years.
TS spray colours
TS-83 Metallic Silver Gloss, paint spray, 100 ml
300085083€24.991 l = €249.90
TS-83 Metallic Silver Gloss is a 100 ml paint spray for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with a smooth metallic coat. On car bodies, broad fenders, roofs and doors can be coated in one consistent colour pass, giving the shell a clean gloss look that suits silver road cars, race liveries and custom builds. The spray format is especially useful when a brush would leave visible strokes across wide panels. One can is stated to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a clear guide for planning full repaints or multiple shells in the same colour. After the main coat has dried, further detailing can be added with acrylic or enamel paints because the TS lacquer layer is not affected by them. That makes it easier to separate the main body colour from window trim, vents, grilles or other fine painted accents. When used for metallic silver or metallic gold finishes, a glossy black primer underneath is recommended to support the final visual depth of the colour. On the bench, the can suits full-body coating before smaller painted details are picked out by hand. It also fits repeat use across several 1/24 car projects where a consistent metallic silver gloss finish is needed. Warning! Not suitable for children under 14 years.
TS spray colours
TS-87 Titanium Gold, paint spray, 100 ml
300085087€12.991 l = €129.90
TS-87 Titanium Gold is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps lay down an even coat across broad surfaces. The metallic Titanium Gold tone gives body shells and larger panels a strong, clean colour presence that suits full exterior coverage rather than detail-only touchups. The spray format is especially useful when a build includes wide curved sections, long side panels or roof areas that benefit from a continuous coat. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a practical reference point before starting a project. The lacquer layer also supports multi-stage finishing, because acrylic and enamel paints can be applied afterwards for smaller painted details. That makes it easier to separate the main body colour from trim, vents, frames or other picked-out sections once the larger surfaces are complete. On the bench, TS-87 suits full-body colour work on car models, custom repaint projects and refresh jobs on existing shells. It also fits display-focused builds where a metallic gold finish helps shaped lines and panel transitions stand out under room light or cabinet lighting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-9 British-Green Gloss, spray paint, 100 ml
300085009€10.491 l = €104.90
TS-9 British-Green Gloss is a 100 ml spray paint for model finishing, combining a deep British-Green shade with a gloss surface that gives shells and parts a clean, uniform colour coat. The aerosol format helps lay colour across broader areas in a continuous pass, which is especially useful when a build calls for an even visual finish rather than visible brush marks. The paint is identified in the technical data as a special acrylic resin spray. That composition supports use in hobby painting where consistent surface coverage matters across shaped panels, edges and curved sections. The can is marked TS-9, so the colour stays easy to match within an established paint range when touch-ups or repeat builds are planned. The net content is 100 ml, a practical size for keeping a dedicated shade on hand for bodywork, accessories or other model parts that need the same gloss green tone. This spray suits finishing sessions at the workbench, whether the goal is coating a single body shell or adding a defined colour accent to selected sections of a model. Because it is an aerosol, painting should be carried out in well ventilated conditions with attention to the handling guidance on the can. Warning! Not suitable for children under 14 years.
TS spray colours
TS-98 Pure Orange Gloss, spray paint, 100 ml
300085098€11.491 l = €114.90
TS-98 Pure Orange Gloss is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and lays down colour across large surfaces with efficient coverage. On car bodies, fairings or other broad shell sections, the gloss orange tone creates a bold, even finish that reads clearly across curves, edges and panel shapes. The formula is especially useful when a brush would leave visible overlap on wider areas. One can is stated to fully cover 2 or 3 car model bodies in 1:24 scale, which gives a practical guide for planning a full paint session before detail work begins. After the main coat has been applied, enamel and acrylic paints can be used to pick out trim, accents and smaller painted sections without affecting the spray layer. That sequence supports clean separation between the base colour and later hand-painted details. On the bench, TS-98 suits full-body colour work where speed and an even gloss surface matter more than piecemeal brushing. It also fits projects that combine a sprayed main coat with follow-up accent painting, whether the goal is a road car body, a race livery base or another model with broad exterior panels. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-13 Metallic Blue Gloss, acrylic paint, 23 ml
300081013€5.491 l = €238.70
X-13 Metallic Blue Gloss is an X-Acrylic resin paint for plastic model building, supplied in a 23 ml jar and developed for brush-applied colour work on scale projects. The metallic blue shade and gloss finish give body panels, trim sections and selected details a bright, reflective look that stands out under light. The paint belongs to the X-Acrylic gloss range identified in the data as X-13, making it easy to match with established build plans and colour references. The formulation is described as a mixture of binder, pigments and solvents, with a density of 1.0 g/ml at 23 °C. The safety data identifies the paint as flammable liquid category 3 with a flash point of 31 to 33 °C, so handling belongs in a well-ventilated workspace and away from heat sources. The same documentation states use for plastic model building, keeping the application clearly tied to hobby and scale modelling tasks. On the bench, the 23 ml volume suits repeat use across multiple sessions, whether the goal is covering a small accent area, refreshing a previous finish or keeping the same metallic tone across several matching components. Metallic Blue Gloss works especially well where a build needs contrast between painted sections and surrounding parts, giving model surfaces a cleaner, more defined visual break.
XY acrylic colours
X-14 Sky Blue Gloss, acrylic paint, 23 ml
300081014€5.491 l = €238.70
X-14 Sky Blue Gloss brings a vivid blue tone and a reflective finish to plastic model building, with a 23 ml jar sized for repeated brush work on body sections, trim pieces and small detail areas. The acrylic resin formula is presented as a gloss paint, so the colour reads with a clean surface sheen when used on carefully prepared parts. This paint is identified as X-14 within the X-Acrylic range and is intended for model making use. The liquid mixture contains binders, pigments and solvents, with a density of 1.0 g/ml at 23 °C according to the supplied safety data. The same documentation states a flash point of 31-33 °C and classifies the paint as flammable, so handling belongs in a well-ventilated workspace with appropriate care. For storage, the container should remain tightly closed and kept away from heat sources. On the bench, the Sky Blue shade suits clean colour separation on panels, interior elements and other small components where a brush-applied gloss finish helps define shape and contrast. The 23 ml quantity also supports ongoing touch-ups and repeat use across several modelling sessions when matching blue accents on related builds
XY acrylic colours
X-33 Bronze Gloss, acrylic paint, 10 ml jar
300081533€3.791 l = €379.00
X-33 Bronze Gloss brings a metallic bronze finish to plastic model building in a compact 10 ml jar, giving small parts, trim sections and accent areas a glossy painted surface with controlled brush application. This X-Acrylic paint is identified as a liquid brush paint for model making, with a bronze colour, gloss finish and an alcohol-like odour. The safety data names it as paint for plastic model building and lists a density of 1 g/mL at 23°C. The mixture contains binders, pigments and solvents, and the data sheet states a boiling range of 80 to 120°C, a flash point of 31 to 33°C and a vapour pressure of 42.7 hPa at 20°C. These technical details place it clearly in the category of solvent-containing hobby paint rather than a general craft colour. On the workbench, the 10 ml volume suits detail painting sessions, colour corrections and finishing passes on selected components instead of large-area coverage. Bronze gloss can be used to pick out vents, fittings, frames or decorative sections where a metallic contrast changes the look of the assembled model. Use only in well-ventilated areas and follow the hazard information on the label during handling and storage.
XY acrylic colours
X-9 Brown Gloss, acrylic paint, 23 ml jar
300081009€5.491 l = €238.70
X-9 Brown Gloss brings a glossy brown finish to scale modelling work in a 23 ml jar, giving small surfaces, trim sections and detail zones a defined, polished look during brush painting. As part of the X-Acrylic paint range, it is intended for model building use and adds a strong colour note where darker tones and sheen are needed. The liquid paint is identified as brown with a gloss finish, making it suitable for accent areas, interior sections and finishing passes that benefit from a reflective surface rather than a flat one. The 23 ml size fits neatly into a regular paint rack and supports repeated use across multiple modelling sessions. Product data for this paint lists a density of 1 g/ml at 23 °C and a flash point of 31-33 °C. The mixture contains binders, pigments and solvents, and the safety data identifies it as flammable liquid category 3 with eye damage and inhalation hazard warnings. Used on scale kits, scenery details or small accessories, the shade can help separate brown components from surrounding colours and sharpen visual contrast on finished builds. For handling, the safety data states use in well-ventilated areas and storage away from heat and ignition sources. Keep out of reach of children.
XY acrylic colours
XF-20 Flat Medium Grey, acrylic paint, 10 ml
300081720€3.591 l = €359.00
XF-20 Flat Medium Grey brings a muted grey tone to model painting with a flat finish that keeps reflections low on the painted surface. The acrylic paint format and 10 ml jar size make it easy to allocate colour for detail passes, small-area coverage or measured touch-up work on scale builds. The Flat Medium Grey shade suits projects that call for a restrained neutral tone rather than a glossy effect. On body sections, interior parts, equipment details or structural elements, the flat surface appearance helps the colour read evenly under display lighting and during close-up finishing work. The 10 ml content gives a clear reference point when planning paint use across one build or several smaller painting sessions. Hazard labelling with flame and exclamation symbols indicates that careful handling is required during storage and use. On the workbench, XF-20 fits neatly into painting stages such as base coating selected parts, refining edges after assembly or correcting small marks before a model goes on display. It also works well when a build needs a single grey tone repeated across separate components for a consistent overall look.
XY acrylic colours
XF-53 Flat Neutral Grey, acrylic paint, 10 ml
300081753€3.591 l = €359.00
XF-53 Flat Neutral Grey is an acrylic paint for scale modelling work, supplied in a 10 ml jar for compact storage and measured use at the workbench. The flat neutral grey tone suits technical surfaces and restrained colour schemes, giving painted sections a matte look that avoids a glossy finish. Within a modelling setup, this shade can be used for vehicle panels, equipment parts or scenery elements where a balanced grey is needed instead of a warmer or darker tone. The acrylic formula supports careful application in small areas, which helps when edging around moulded detail, picking out separate components or refining colour transitions on a build. The jar size also makes it practical to keep several shades close at hand during painting sessions without crowding the workspace. On ongoing projects, XF-53 works well for touch-ups, partial repainting and detail correction after assembly or handling. It also fits neatly into planned colour layouts where a flat grey is needed for contrast beside metallics, camouflage tones or darker trim. Paint for modelling use requires careful handling and storage.
XY acrylic colours
XF-6 Copper, acrylic paint, 10 ml jar
300081706€3.591 l = €359.00
XF-6 Copper brings a metallic copper shade to model painting in a compact 10 ml jar that fits easily into a finishing setup. The acrylic paint format supports careful colour placement on smaller sections, where a warm metal tone can change the look of vents, fittings, trim pieces or interior details with just a few brush strokes. Within the XF acrylic range, this shade adds a distinct alternative to standard steel, aluminium or body colours. Metallic copper can be used to separate mechanical parts visually, highlight selected contours or introduce period-style detail on scale subjects that call for a richer metal note. The 10 ml quantity suits focused paint jobs, correction work and repeat sessions on the bench without taking much storage space. The jar format also keeps the colour identifiable at a glance through the XF-6 designation. On a build table, this paint supports the final stages that give a model more definition, whether the task is refining a cockpit, adding contrast to engine-area parts or refreshing small sections after assembly. The copper tone also lends itself to diorama accessories and other miniature surfaces where a metallic accent helps individual elements stand apart.
XY acrylic colours
XF-61 Flat Dark Green, acrylic paint, 10 ml
300081761€3.591 l = €359.00
XF-61 Flat Dark Green brings a muted, matte color tone to scale finishing work in a 10 ml paint jar that suits compact bench setups and focused detail painting. The acrylic formula supports careful application on smaller sections, where controlled coverage and clean edge work matter during painting sessions. The flat finish gives the shade a subdued look that works well on military subjects, utility equipment and scenery details where a glossy surface would look out of place. Used for panel sections, accessories or corrective touch-ups, the dark green tone helps maintain visual consistency across a build. The jar format keeps the paint easy to store alongside other finishing supplies, while the clearly identified XF-61 designation helps locate the exact shade again during later stages of a project. This makes the color practical not only for first application, but also for follow-up work after assembly, masking or added surface detail. On the workbench, the 10 ml volume suits repeated access during brush painting, small-part finishing and selective repainting. Whether used to complete a single section or to refine several matching details across a model, XF-61 Flat Dark Green adds a precise, workshop-ready color option to the painting process.
XY acrylic colours
XF-69 Flat NATO Black, acrylic paint, 10 ml
300081769€3.591 l = €359.00
XF-69 Flat NATO Black brings a muted black tone to scale finishing work in a compact 10 ml paint jar. The flat finish suits military subjects, equipment details and other surfaces where a low-reflection look supports a more authentic painted result at model scale. This acrylic paint is suited to careful brush application on smaller parts, trim sections and touch-up areas that need controlled colour placement. The XF designation identifies it within the Tamiya paint range, making it easier to match with other colours already used in a build plan. The 10 ml volume works well for benches that keep several shades ready for ongoing projects, and the small jar format stores neatly alongside other modelling supplies. The visible hazard labelling indicates that the contents should be handled with appropriate care during painting sessions. On military vehicle builds, XF-69 can be used for tools, fittings, interior sections or exterior details that call for a restrained black tone rather than a glossy finish. It also fits diorama accessories and small correction work, where a compact jar and flat colour help keep finishing tasks precise and consistent.
XY acrylic colours
XF-72 Flat Brown JGSDF, acrylic paint, 10 ml
300081772€3.591 l = €359.00
XF-72 Flat Brown JGSDF brings a focused military-style brown tone to scale modelling work, with acrylic paint in a 10 ml format that fits neatly into regular bench use. The flat finish keeps the colour matte on the surface, which helps painted sections sit naturally alongside other non-gloss details on vehicles, figures or accessories. The XF-72 designation makes this shade easy to identify within an existing paint range, especially when a build calls for a specific brown rather than a general-purpose tone. The compact 10 ml quantity suits targeted jobs such as panel details, equipment parts, trim sections or colour correction on earlier coats. In a modelling setup, a dedicated shade like Flat Brown JGSDF helps keep camouflage, field equipment and weathered accents visually consistent across separate stages of painting. On the workbench, this paint fits neatly into careful brush sessions and other detail-led finishing tasks where measured colour use matters more than large-volume coverage. It also works well as a reserve shade for later touch-ups, so matching small repaired areas does not require mixing a brown tone again from scratch.
XY acrylic colours
XF-8 Flat Blue, acrylic paint, 23 ml jar
300081308€5.491 l = €238.70
XF-8 Flat Blue is an acrylic paint for model work, supplied in a 23 ml jar and identified by the XF code for a flat, non-gloss colour finish. The blue shade suits brush-painted details, small surface sections and touch-up work where a muted tone fits the look of the build. The safety data identifies this paint as a liquid with an alcohol odour and a density of 1.2 g/mL at 23 °C. Its flash point is 33 °C, and the formula is classified with flammable and irritant hazard warnings. The documented VOC content is 30 Gew-%. Storage guidance states that the container should be kept tightly closed in a cool, well-ventilated place and away from heat, sparks and open flames. Protective gloves and eye protection are stated for handling, and use in well-ventilated areas is specified in the safety information. On the workbench, the 23 ml volume suits repeat use across detail sessions, colour corrections and matching painted sections on the same model. The flat blue tone can be applied where a gloss-free surface is needed for scale finishes, accent parts or layered paint schemes.
AS spray colours
AS-27 Flat Gunship Grey 2, spray paint, 100 ml
300086527€12.291 l = €122.90
AS-27 Flat Gunship Grey 2 brings aircraft-focused spray application and a muted flat grey tone into one 100 ml aerosol can, giving model builders a direct way to cover larger airframe sections with an even painted surface. The can format is designed for spray use rather than brush loading, which suits broad areas such as wings, fuselage panels and tail sections. The label identifies this paint as part of the AS range for aircraft, placing it in a finishing category aimed at scale aviation subjects. The Flat Gunship Grey 2 shade suits schemes that call for a restrained grey rather than a glossy surface, and the flat character changes how light sits on the painted model once the coat has dried. The pressurised can dispenses paint through a nozzle mounted at the top, so colour is applied in a fine sprayed layer across the target surface. Hazard pictograms shown on the pack indicate that the contents are flammable and require careful handling during use and storage. On the workbench, this format fits painting sessions where a single colour needs to cover multiple connected parts with a consistent tone. It also suits finishing stages that call for a dedicated aircraft shade in spray form, whether the goal is a full exterior coat or matching adjacent sections on the same build.
AS spray colours
AS-28 Flat Medium Grey, paint spray, 100 ml
300086528€12.291 l = €122.90
AS-28 Flat Medium Grey brings a subdued, non-gloss colour tone to model finishing, with a spray format that helps lay down an even coat across larger surfaces and shaped sections. The 100 ml can suits bench work where a consistent grey is needed for body panels, structural parts or coordinated repainting. The flat finish keeps reflections low, so panel lines, edges and added surface detail remain visually clear after painting. Medium grey fits naturally into military, mechanical and industrial schemes, and it also serves as a useful neutral base for layered weathering, accent colours or further detailing. The aerosol format supports steady application over curved shells, broad side panels and other model parts that benefit from continuous coverage rather than brush strokes. AS-28 also helps keep colour matching consistent when several sections of the same build need the same tone. On the workbench, this shade suits full-colour coats, selective refinishing and touch-up tasks where a clean matte grey is the target. It also fits projects that combine painted assemblies with decals, panel accents or weathered finishes, giving model surfaces a restrained and technical character.
AS spray colours
AS-5 Flat Light Blue, paint spray, 100 ml
300086505€12.291 l = €122.90
AS-5 Flat Light Blue is a paint spray for model finishing, supplied in a 100 ml can and matched to a Luftwaffe colour tone. The flat finish gives aircraft builds a muted surface appearance that suits military subjects and helps avoid unwanted gloss on completed exterior panels. The spray format is suited to covering larger model sections where brush application can leave visible overlap, especially on wings, fuselage halves and tail surfaces. Used in light passes, the paint can build an even coat while keeping panel lines and surface moulding visually clear. The clearly named AS-5 designation also makes colour selection straightforward when a build calls for a specific military shade rather than a general blue. On the workbench, this paint fits naturally into aircraft assembly, restoration and repainting tasks where a consistent exterior tone matters across several parts. It can be used when finishing a new scale model, refreshing an older display piece or matching replacement sections to an existing Luftwaffe scheme.
AS spray colours
AS-6 Flat Olive Drab, paint spray, 100 ml
300086506€12.291 l = €122.90
AS-6 Flat Olive Drab (USAAF) is a 100 ml paint spray for scale modelling work that calls for a muted military colour and a flat surface finish. The spray format suits broad exterior sections where an even coat and steady colour application matter, whether the focus is an aircraft fuselage, wing panels or other large model areas. The designation Flat Olive Drab (USAAF) gives this colour a specific place within military finishing rather than a generic green tone. In practical use, the flat finish reduces shine on the painted surface, which helps preserve the subdued appearance associated with service aircraft schemes. The 100 ml can size provides a clear reference for planning paint use across single builds or touch-up work on larger assemblies. Within a modelling bench setup, a dedicated spray colour like AS-6 also keeps the finishing stage streamlined when a brush-painted texture is not desired. This paint spray fits naturally into build sessions that move from surface preparation to colour coating and final detailing. It can be used when a model needs a uniform base colour before markings are added, or when a military subject calls for a consistent olive drab finish across multiple exterior sections.
Diorama texture colours
Epoxy Putty Quick Type, 2-component modeling putty
300087143€23.991 kg = €239.90
Epoxy Putty Quick Type is a 2-component modeling putty for shaping, filling and modifying parts in hobby builds. The 100 g pack provides separate compounds that are mixed by kneading, creating a workable mass for sculpting new forms, refining surfaces and carrying out repairs on model pieces at the bench. Its stated uses cover R/C modeling, detail fabrication, sculpting, kit modifications and repairs, which makes it suitable for both adding material and correcting existing shapes. The solid compound is odorless, and the separate white and beige or orange bars help keep the resin and hardener apart until preparation begins. This format supports controlled mixing in smaller portions when only a limited amount is needed for a seam, contour or custom detail. The material is supplied as a 2-component putty for model making. On a body shell, figure, accessory or scratch-built section, the mixed putty can be pressed into gaps, built up over an edge or formed into added detail before the next finishing steps. For workshop use, avoid contact with skin and eyes, avoid inhaling dust or vapors, and use in a well-ventilated area with protective gloves and eye protection. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-20 Light Gun Metal, lacquer paint, 10 ml
300082120€3.491 l = €349.00
LP-20 Light Gun Metal is a gloss lacquer paint supplied in a 10 ml jar for scale model finishing and detail work. The metallic grey tone gives parts a clean machined look, whether it is used on mechanical sections, trim pieces or selected body details that benefit from a lighter gun metal shade. The lacquer formula is part of the LP paint range and is suited to precise application on small surfaces where colour definition matters. The gloss finish leaves a reflective metallic character that can be used as a base for further weathering or kept clean for freshly finished components. The compact 10 ml size fits neatly into a bench setup with other modelling colours and supports targeted use on individual assemblies instead of committing a large volume to one shade. On a model bench, LP-20 works well when a build calls for contrast between darker structural colours and brighter metal accents. It can be used across body accessories, cockpit elements or exposed technical parts, adding a distinct metallic note that helps separate materials and surfaces within the finished build.
Lacquer colours
LP-35 Insignia White Flat, paint, 10 ml
300082135€3.491 l = €349.00
LP-35 Insignia White Flat brings a defined white tone and a non-gloss surface to model finishing work in a compact 10 ml format. The shade suits builders who need a matte white for selected panels, interior sections or smaller exterior details, with the jar size lending itself to careful brush work and measured paint use at the bench. Within the LP paint range, this colour can be worked into planned finishing sequences where a flat white is needed alongside other tones in the same series. The 10 ml content makes it practical for detail passes, corrections and smaller-area coverage rather than broad-volume coating. On scale subjects with contrasting trim, cockpit elements or equipment parts, the flat surface helps avoid the reflective look that can distract from a more restrained finish. The clearly identified LP-35 designation also makes shade selection and repeat use easier when a build returns to the painting stage after assembly or decal work. On the workbench, this paint suits focused sessions spent refining edges, picking out molded details or adjusting colour balance on a nearly finished model. It also fits ongoing supply rotation for builders who keep specific tones ready for touch-ups, repaints and future projects.
Lacquer colours
LP-48 Sparkling Silver, lacquer paint, 10 ml
300082148€4.491 l = €449.00
LP-48 Sparkling Silver is a gloss lacquer paint created for model finishing work where a metallic silver tone needs a brighter, more reflective character. The 10 ml jar size suits focused paint application on selected sections, whether the goal is a full silver coat on a small part or a controlled accent on trim, panels or decorative details. The gloss finish changes how light sits on the painted surface, giving Sparkling Silver a cleaner shine than a flat colour and helping metallic areas stand apart from surrounding tones. As part of the LP-Paint range, this colour fits naturally into detailed modelling workflows that use separate shades for base coats, highlights and finishing touches. The compact volume also makes it practical when a specific metallic colour is needed for one stage of a build rather than for broad coverage across many large parts. On a workbench, LP-48 can be used to pick out visual breaks between body sections, add contrast to mechanical details or bring a brighter metallic note to custom paint schemes. It also suits restoration or touch-up tasks on existing models where a gloss silver shade is needed to match surrounding finished areas.
Lacquer colours
LP-68 Clear Blue, lacquer paint, 10 ml
300082168€3.491 l = €349.00
LP-68 Clear Blue brings a transparent blue tone to model finishing, giving selected sections a tinted look while leaving molded lines and surface structure visible beneath the coat. The lacquer paint format suits detail-led work on scale subjects, especially where a solid colour would cover too much of the underlying form. The 10 ml content is sized for targeted applications rather than broad coverage, which makes this shade useful for lenses, windows, light parts or other small accents where controlled colour placement matters. As a clear paint, LP-68 is suited to effects that depend on light passing through the layer instead of stopping at an opaque surface. That makes it a practical choice when a build calls for colour depth, a glazed look or restoration of a previously tinted section. The shade designation LP-68 also helps keep colour selection exact within a broader paint lineup. On the workbench, this paint fits neatly into finishing stages that focus on selected details rather than full-body coverage. It can be kept ready for repeat touch-ups, custom highlights or small corrections on model projects where a transparent blue accent completes the final look.
Lacquer colours
LP-75 Buff Flat 10 ml, lacquer paint
300082175€3.491 l = €349.00
LP-75 Buff Flat is a lacquer paint in a 10 ml jar, sized for model finishing work where controlled colour use matters. The Buff shade and flat finish suit surfaces that call for a muted, low-sheen appearance, whether the goal is base coating smaller sections or refining painted details on a build. Within the LP paint range, this colour gives model builders a clearly identified reference through the LP-75 designation, making repeat use across separate sessions easier to track. The lacquer formulation fits common modelling paint workflows where clean edges, careful brushwork and targeted coverage on individual parts are part of the process. The compact jar size also helps when organising a paint rack or carrying selected colours to a workbench for a specific project. On military models, utility vehicles, figures or weathered accessories, Buff Flat can be used where a subdued earth-toned colour is needed instead of a glossy surface. It also suits touch-up work on finished assemblies, small detail areas and selective repainting where opening a larger paint volume would be unnecessary.
Lacquer colours
LP-78 Flat Blue, lacquer paint, 10 ml jar
300082178€3.491 l = €349.00
LP-78 Flat Blue brings a muted blue tone to model finishing in a compact 10 ml jar, making it easy to add colour where controlled application matters most. The flat finish keeps reflections low on painted surfaces, which suits builds that call for a more restrained, scale-focused appearance. As part of the Tamiya LP-Paint range, this lacquer paint fits naturally into hobby work that moves from base coating to smaller corrections and colour accents. The 10 ml content is practical for bench use, where paint is often opened, closed and returned to storage between stages of a build. Flat Blue can be used when a scheme needs a solid blue area without a glossy top look, and it also works for selective repainting on parts that need colour continuity across the same project. The jar format keeps the paint contained and ready for measured use during careful finishing sessions. On the workbench, LP-78 suits model builders handling body parts, accessories or surface details that benefit from a flat blue coat. The label also carries GHS hazard pictograms for flammable, warning and corrosive handling information, so storage and use should follow the marked precautions on the container.
PS spray colours
PS-18 Metallic Purple, polycarbonate spray paint
300086018€10.991 l = €109.90
PS-18 Metallic Purple brings a bold metallic finish to polycarbonate model bodies, with a spray format that suits broad, even coverage across curved panels and shell contours. The 100 ml can is sized for hobby bench use, giving a compact paint supply for body finishing work on RC and scale modelling projects. This paint is specified for polycarbonate, making it a targeted choice for clear bodyshell materials rather than a general craft coating. The metallic effect catches light differently across arches, rooflines and side sections, so body shapes read more clearly once the colour is laid down. The aerosol format helps distribute paint in a fine mist over larger sections, which is useful when a shell has sweeping surfaces or multiple connected panels. The PS-18 designation also makes colour matching and repeat purchases straightforward within an existing paint plan. On a fresh bodyshell, the can supports full-colour exterior styling for racing, touring or custom builds where a strong purple tone is part of the final look. It also fits repaint work on replacement shells or new body projects where a single, clearly identified metallic shade is needed for a coordinated finish. Warning! Not suitable for children under 14 years.
PS spray colours
PS-30 Brillant Blue, polycarbonate spray paint
300086030€10.991 l = €109.90
PS-30 Brillant Blue brings a vivid spray-applied colour to polycarbonate model parts, with a formula made specifically for this material and a 100 ml aerosol can that suits broad, curved surfaces. The can format helps cover shell sections evenly while keeping the application focused on formed body panels rather than small brushwork. This paint is intended for polycarbonate use in model building and finishing, where clear shells, wings and similar components need a dedicated coating method. The aerosol delivery supports repeated light coats, a practical approach for shaped surfaces with edges, arches and recesses that are awkward to cover by hand. Brillant Blue works as a single-colour finish or as part of a larger livery plan when a build calls for a strong blue base tone. The compact can size also fits neatly into hobby bench setups where several colour stages may be used across one shell. On RC body projects, the spray format suits fresh shell preparation, colour changes and replacement bodywork that needs fast, even coverage over larger areas. It also fits display-focused model finishing where polycarbonate parts need a clean, uniform blue tone that follows the moulded lines of the shell. Warning! Not suitable for children under 14 years.
PS spray colours
PS-41 Bright Silver, polycarbonate spray paint
300086041€10.991 l = €109.90
PS-41 Bright Silver is a polycarbonate spray paint for model finishing work, supplied in a 100 ml aerosol can. The metallic silver shade gives RC bodyshells and other compatible polycarbonate parts a bright, reflective look that suits race-inspired liveries, trim accents and full-body color layouts. The paint specification is focused on polycarbonate rather than general craft use, which matters when a shell flexes during handling and running. The aerosol format helps lay color across broad curves, roof sections and wheel arch contours with continuous passes instead of brush marks. Bright Silver works well for single-color bodies, layered custom schemes or selected panels that need a metallic contrast against darker tones. The compact can size also fits smaller workshop storage and targeted repaint jobs where only one shell or a few sections need coverage. On the bench, the can supports body preparation and finishing as part of an RC build or refurbishment session. It suits fresh color work on a new shell, visual updates on an existing bodyshell, or detail spraying on polycarbonate parts that need a uniform silver coat to complete the overall look. Warning! Not suitable for children under 14 years.
PS spray colours
PS-54 Cobalt Green, spray paint, for polycarbonate
300086054€12.191 l = €121.90
PS-54 Cobalt Green is a spray paint for polycarbonate model bodies, bringing a vivid green tone to RC shell finishing in a format built for broad, even coverage. The 100 ml aerosol can suits painting sessions where smooth colour application across curved surfaces matters as much as the final shade. This PS series paint is intended for polycarbonate, the material commonly used for lightweight RC bodyshells that flex during running. The spray format helps reach roof sections, side panels and wheel arch curves more evenly than hand painting, which is especially useful when a shell carries multiple moulded lines and recessed details. Cobalt Green adds a strong, cool-toned colour option for single-colour bodies, racing stripes or masked graphic sections. The can shown in the range uses the PS designation and colour code PS-54, making it easy to match the shade within a larger paint plan. On the bench, the 100 ml volume fits typical body finishing work for RC car shells and supports controlled passes over larger panel areas. It works well in projects that combine one main body colour with taped-off sections, window masks or layered race-style graphics on polycarbonate bodies. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Pavement Dark Grey, diorama paint
300087115€17.991 l = €179.90
Texture Clay Pavement Dark Grey brings a dark grey pavement effect to diorama surfaces, turning plain boards and bases into urban ground with visible texture. The 100 ml format suits scenery work where roads, streets and hardstanding areas need more than a flat painted finish. The formula is intended for terrain reproduction and can be used to build up surface character on model bases, display plinths and scenic panels. Instead of leaving groundwork smooth, it creates a textured layer that gives paved sections a more convincing scale appearance. The dark grey tone fits city scenes, roadside sections and industrial settings where a muted surface helps vehicles, structures and figures stand out. The bottle format keeps the material ready for repeated use across smaller corrections or broader groundwork passes. On a diorama base, the paint can define a street edge, a parking area or a worn section of roadway beside buildings and barriers. It also suits test boards and sample panels when comparing finishes across a larger scene. For model makers shaping urban layouts, it adds a clear surface identity that helps tie separate scenic elements into one coherent setting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-23 Light Blue Gloss, spray paint, 100 ml
300085023€10.991 l = €109.90
TS-23 Light Blue Gloss brings a clean, glossy light blue finish to plastic model work in a 100 ml aerosol can. The spray format suits broad surfaces and shaped parts alike, so body shells, fairings and exterior panels can take colour with a smooth visual flow instead of visible brush marks. This TS paint is identified in the data as a special acrylic resin spray for model use. The can is intended for plastics, making it a practical choice when a project calls for an even colour layer across curved sections, edges and recessed contours. A gloss finish gives the painted surface a brighter, more reflective look than a flat coat, which helps light catch on body lines and molded details. The 100 ml fill also gives useful coverage for larger model sections or for several matching parts within one build. On the bench, the aerosol can supports light, repeated passes across prepared components, whether the goal is a full exterior colour, a coordinated accent on selected panels or a fresh finish for replacement parts. In model car, bike, aircraft or similar hobby projects, the light blue shade stands out clearly while keeping the surface look crisp and uniform. Radio gear, a battery pack, a charger and paints are required separately. Warning! Not suitable for children under 14 years.
TS spray colours
TS-28 Olive Drab 2 Flat, spray paint, 100 ml
300085028€10.491 l = €104.90
TS-28 Olive Drab 2 Flat brings a muted military shade to plastic model work in a 100 ml aerosol can. The flat finish keeps reflections low, so vehicle panels, equipment parts and other surfaces read with a more scale-focused appearance once the paint has cured. This TS series spray is identified in the data as a special acrylic resin spray for plastics. The aerosol format helps lay colour across wider sections where a brush would leave visible stroke patterns, and it can be used on curved shells, flat armour plates or shaped exterior parts that need an even coat. Olive Drab 2 suits military vehicles, field accessories and subdued camouflage schemes where a non-gloss surface is part of the final look. The 100 ml fill gives useful capacity for multiple parts or a larger single build, depending on the size of the surfaces being painted. On the bench, the can supports quick colour application for body sections, exterior panels and detail groups that share the same shade. For hobby painting sessions, it fits naturally into projects that call for a uniform flat green tone across plastic components while keeping the finish visually restrained rather than shiny. Warning! Not suitable for children under 14 years.
TS spray colours
TS-43 Racing Green Gloss, spray paint, 100 ml
300085043€10.491 l = €104.90
TS-43 Racing Green Gloss brings a deep green tone and a reflective finish to model painting in a compact 100 ml aerosol can. The spray format supports broad, even coverage on visible exterior sections, making it useful for body shells, fairings and other parts where a uniform coat shapes the final look. This colour belongs to the TS series of special acrylic resin sprays for model work. The can is intended for plastic surfaces, and the aerosol application suits larger areas that are harder to cover evenly with a brush. Racing Green Gloss fits naturally into classic motorsport schemes, heritage-inspired vehicle builds and custom colour plans that need a darker green with a polished surface effect. The cap colour also gives a quick visual reference when selecting shades from a paint rack or workbench setup. On the bench, the 100 ml size is easy to keep alongside masking materials, primers and finishing supplies for body painting sessions. For car, bike or aircraft modelling, the gloss surface provides a strong base appearance on its own and can also sit within multi-colour paint layouts where clean, consistent coverage across outer panels is the main goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-49 Bright Red Gloss, spray paint, 100 ml
300085049€10.491 l = €104.90
TS-49 Bright Red Gloss brings a strong, glossy red tone to plastic model work in a ready-to-use 100 ml aerosol can. The spray format suits broad body panels, curved shells and separate trim parts, creating a clean colour layer that gives model surfaces a vivid, uniform appearance. This Tamiya Color paint is identified as a spray for plastics and belongs to the TS paint range for model finishing. The acrylic resin spray formula is supplied in a pressurised can, so colour can be applied directly without mixing in the can itself. The Bright Red Gloss shade works well where a solid, high-visibility red is needed across exterior sections, and the gloss finish helps body lines and shaped contours read clearly once coated. The can size also makes it practical for keeping one dedicated colour on hand for repeat touch-ups or matching multiple parts within the same build. On the bench, TS-49 suits model car bodies, fairings, panels and other plastic components that call for an even red topcoat. It also fits projects where separate pieces need the same colour across the full build, helping maintain a consistent finish from the main shell to smaller exterior details. Warning! Not suitable for children under 14 years.
TS spray colours
TS-52 Candy Lime Green Spray Paint, 100 ml
300085052€10.491 l = €104.90
TS-52 Candy Lime Green brings a bright coated finish to model work with a 100 ml aerosol format that covers larger surfaces quickly and evenly. The semi gloss colour sits between a flatter painted look and a full shine, giving body sections, panels and shaped parts a clean, vivid presence straight after spraying. This TS paint is identified as a special acrylic resin spray and is intended for model finishing use. The aerosol format helps lay colour across contours, edges and broader sections in one continuous pass, which is especially useful when a brush would leave visible strokes on the surface. The can is marked for plastics, making it suited to many common model parts where an even coat and consistent colour matter. When a higher-shine result is wanted, TS-13 glossy clear coat 300085013 can be applied over the colour layer to change the final surface appearance. The 100 ml fill works well for hobby benches where single-colour coverage is needed for shells, panels or accessory parts in a matching shade. Candy Lime Green stands out on display pieces, custom builds and restoration work where a strong green tone helps define the finished look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-64 Dark Mica Blue Gloss, paint spray, 100 ml
300085064€10.491 l = €104.90
TS-64 Dark Mica Blue Gloss is a 100 ml spray paint for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with a consistent coat. The dark mica blue gloss colour gives car bodies a rich metallic look that stands out under light and suits both factory-style finishes and custom paint schemes. The aerosol format is especially useful when a build calls for broad, smooth colour coverage across body panels, roofs and curved sections that are harder to finish evenly with a brush. Tamiya states that one can is enough to fully cover 2 to 3 car model bodies in 1/24 scale, which gives a practical guide for planning paint use before a project starts. After the main coat has been applied, acrylic and enamel paints can be used for smaller details because the TS lacquer layer is not affected by them. That makes it easier to separate the main body colour from trim, lights, frames or other picked-out areas during the finishing stage. On the bench, this paint suits full-body colour work on car models where a smooth gloss surface and even metallic tone matter. It also fits multi-step finishing routines in which the main shell is sprayed first and detail painting follows once the body colour has cured. Warning! Not suitable for children under 14 years.
TS spray colours
TS-68 Wooden Deck-Tan, spray paint, 100 ml
300085068€12.291 l = €122.90
TS-68 Wooden Deck-Tan Li.Brown Fla. is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and suits broad surfaces that are awkward to cover with a brush. The aerosol format helps lay down an even coat across larger body panels and deck sections, giving scale builds a consistent base colour with fewer passes. This TS paint is designed so later detail work can follow with enamel and acrylic paints, allowing trim, panel accents or small fittings to be picked out after the main colour has dried. The can carries the TS-68 code on the cap for quick shade recognition during a session, and the cap colour gives a direct visual cue for the Wooden Deck-Tan Li.Brown Fla. tone. A 100 ml fill provides a useful planning benchmark, with enough paint to fully cover 2 or 3 car model bodies in 1/24 scale. The paint is intended for adult modelers only. On car bodies, ship deck sections or other large model parts, the spray format supports steady coverage across wide areas where brush marks would interrupt the finish. It fits naturally into multi-step paint work, where a full base coat comes first and smaller accents follow with other paint types once the main surface is complete. Warning! Not suitable for children under 14 years.
TS spray colours
TS-75 Champagne Gold, paint spray, 100 ml
300085075€11.491 l = €114.90
TS-75 Champagne Gold is a 100 ml paint spray for model finishing, combining a metallic gold tone with the fast-curing behaviour of synthetic lacquer. The aerosol format helps lay down colour across broad body sections in an even coat, so larger surfaces can be covered with fewer interruptions during painting. This spray is especially useful on model bodies and other wide exterior parts where brush application would leave a less uniform result. A single can contains enough paint to fully cover 2 to 3 car bodies in 1/24 scale, which gives a practical benchmark when planning a build or a repaint. The lacquer layer also works well in mixed paint workflows because acrylic and enamel paints can be applied afterward for smaller details and picked-out trim. For a glossier surface finish, TS-13 glossy clear coat can be used over the colour coat. On the bench, TS-75 suits full-body colour application, touch-up work on larger panels, and coordinated finishing across several scale car projects. The Champagne Gold shade brings a crisp metallic look to body shells, while the spray format supports steady coverage on roofs, doors, bonnets and other shaped surfaces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-81 British Navy Grey, spray paint, 100 ml
300085081€12.291 l = €122.90
TS-81 British Navy Grey is a 100 ml spray paint developed for model finishing, with a synthetic lacquer formula that cures in a short period of time and helps cover larger surfaces with a smooth, even colour pass. The aerosol format suits broad areas that are harder to finish evenly with a brush, such as body shells, hull panels or other wide exterior sections on scale builds. The colour reference is British Navy Grey, giving a specific muted grey tone for projects that call for a controlled, technical finish rather than a bright accent. Tamiya TS spray paints are described as not being affected by acrylic or enamel paints, which supports a layered workflow once the main colour has been applied across the assembly. That makes it easier to return to vents, trim lines, fittings or other small sections with a finer brush-painted finish. A single can contains 100 ml of paint, and the stated coverage is enough to fully cover 2 or 3 car model bodies in 1/24 scale. On the bench, this makes TS-81 useful for full-body colour coats, larger subassemblies and projects where an even grey base is needed before smaller painted details are added. It also fits repainting sessions where several matching parts need the same tone across one build or across multiple 1/24 scale bodies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-88 Titanium Silver, spray paint, 100 ml
300085088€12.991 l = €129.90
TS-88 Titanium Silver is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The aerosol format helps cover larger surfaces with an even coat, making it well suited to car bodyshells and other broad sections where brush painting can leave a less uniform finish. The colour is Titanium Silver, giving model builds a metallic tone that suits bodywork, exterior panels and other visible areas that benefit from a consistent sprayed finish. The paint is described as especially useful for large model surfaces, which makes it a practical choice when a build calls for full-body coverage rather than small touch-up work. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, offering a concrete guide for planning paint use across multiple projects or repeat coats where needed. Once the main sprayed coat has cured, further finishing work can continue with enamel and acrylic paints for picked-out details. That compatibility supports layered paintwork on grilles, trim, frames and other smaller sections after the main colour has been laid down, keeping the broad sprayed base and the finer hand-painted accents in the same workflow. Warning! Not suitable for children under 14 years.
TS spray colours
TS-96 Fluorescent Orange, spray paint, gloss 100 ml
300085096€12.991 l = €129.90
TS-96 Fluorescent Orange is a gloss spray paint designed for model finishing, with a synthetic lacquer formula that cures in a short time and lays down colour efficiently across large surfaces. The 100 ml aerosol format suits broad body sections where an even coat and strong visual impact matter, such as car shells, fairings or other large exterior panels. The TS formula is especially useful when a build combines several paint types. After the main coat has dried, acrylic or enamel paints can be used to pick out smaller details because the spray layer is not affected by those paint types. That makes the can a practical choice for staged finishing work, where the main body colour goes on first and trim, markings or fine accents follow later. The fluorescent orange tone gives competition-inspired builds a vivid, high-contrast look, while the gloss finish helps the colour read cleanly across curved surfaces and panel lines. One can contains enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a clear guide for planning material use before painting begins. On the bench, that supports anything from a single full-body respray to several coordinated shells in the same colour family, with room to add hand-painted detail once the main coat has cured. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Stick Light Earth, model finishing tool
300087087€6.191 kg = €2,476.00
The Weathering Stick Light Earth brings dusty ground tones and used surface character to scale modelling in a direct, pen-style format. Its solid compound is formulated with binder and pigments, and the soft applicator tip places color exactly where weathering is needed, from panel edges to recessed areas and textured scenery sections. This finishing tool is intended for creating signs of use in model building, with Light Earth suited to pale soil, dried dirt and road dust effects. The stick format supports controlled application without mixing trays or brushes, which helps when building up thin layers on bodywork, diorama groundwork or structural details. The compound is dispersible in water, adding flexibility during handling and effect building. A cap protects the applicator between sessions, while the compact barrel sits comfortably in a tool drawer or hobby case alongside paints and finishing supplies. At the bench, it suits final weathering passes on military subjects, cars, rail scenes or terrain pieces where clean paintwork needs a more lived-in look. Small accents on corners, lower panels or ground-contact areas can shift a fresh build toward a more convincing display finish. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-14 Sky Blue Gloss, acrylic paint, 10 ml
300081514€3.591 l = €359.00
X-14 Sky Blue Gloss brings a bright blue tone and a glossy painted surface to plastic model building, with 10 ml of acrylic resin paint sized for detail work, touch-ups and smaller painted areas on scale subjects. The liquid formula is intended for brush application, where controlled strokes and careful edge work matter as much as the colour itself. The paint is identified as X-14 within the X-Acrylic range and is described as a gloss finish, making it useful when a build calls for a reflective blue rather than a flat or muted surface. According to the safety data, the mixture contains binders, pigments and solvents, with a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C. The same document states that the liquid and vapour are flammable and that the mixture can cause severe eye damage, so handling belongs in well ventilated areas with care around heat, sparks and open flames. On the workbench, the 10 ml jar suits focused painting sessions, whether adding blue panels, refining trim or correcting small sections after assembly. For model makers who keep several colours in rotation, this compact size also fits neatly into a paint rack or toolbox without taking much space.
XY acrylic colours
X-15 Light Green Gloss, acrylic paint, 10 ml
300081515€3.591 l = €359.00
X-15 Light Green Gloss is an X-Acrylic paint for plastic model building, supplied in a 10 ml jar for controlled brush application on smaller surfaces and fine details. The bright Light Green shade and glossy finish give trim pieces, panels and accent areas a crisp painted look that stands out clearly on a completed build. This paint belongs to the gloss range of Tamiya X-Acrylic colours and is intended for use as a specialist coating rather than a general craft paint. The safety data identifies it as a liquid mixture with binders, pigments and solvents, with a density of 1.0 g/ml at 23 °C and a flash point of 31 to 33 °C. The listed boiling range is 80 to 120 °C, and the solvent content is 50 to 60%. The same documentation states hazard classifications H226, H318 and H336, so handling calls for careful storage, good ventilation and eye protection. On the workbench, the 10 ml format suits measured use on detail zones, touch-up passes and colour-specific finishing steps without taking much space among other modelling supplies. It works well when a build needs a distinct green gloss tone for selected sections rather than broad coverage across large body panels.
XY acrylic colours
X-16 Purple Gloss, acrylic paint, 10 ml
300081516€3.591 l = €359.00
X-16 Purple Gloss brings a glossy purple finish to plastic model building, with a 10 ml jar size that suits detail painting, trim work and smaller painted sections. The acrylic paint format supports brush application where clean placement and controlled coverage matter, such as cockpit elements, body accents and fine surface features. The colour is identified as X-16 Purple Gloss in the Tamiya X-Acrylic range, making it easy to match with build notes, paint plans and established colour references for scale projects. The supplied quantity of 10 ml keeps the jar compact on the workbench while still covering repeated small-area applications and later touch-ups. The safety data identifies the paint as a liquid mixture with pigments, binders and solvents, and lists a density of 1 g/ml at 23 °C. For handling, the documentation states that the paint is intended for use in well-ventilated areas. On model kits, this shade works well where a glossy violet tone is needed for highlights, markings or custom colour layouts. The compact jar format also fits neatly into paint racks, drawers or hobby cases, keeping a specific colour close at hand for ongoing finishing work across multiple builds.
XY acrylic colours
X-16 Purple Gloss, acrylic paint, 23 ml jar
300081016€5.491 l = €238.70
X-16 Purple Gloss brings a strong violet tone and a glossy surface to plastic model painting, with 23 ml in each jar for repeated brush sessions across detail parts, trim sections and larger colour areas. The liquid acrylic paint format suits controlled application where edges, recesses and shaped panels need a defined coat rather than a broad spray pattern. The safety data identifies this paint as a brush paint for plastic model building, with pigments, binders and solvents in the mixture. The colour is listed as violet, the density as 1 g/mL at 23°C, and the flash point as 31-33°C. The boiling range is 80-120°C, and the liquid has an alcohol odour. Hazard classification includes flammable liquid category 3, serious eye damage, harmful if inhaled, and possible drowsiness or dizziness, so use belongs in well-ventilated spaces with careful handling. On the workbench, the glossy finish suits accent panels, cockpit details, accessories and trim that benefit from a saturated purple tone. The 23 ml jar supports both single-build colour work and later touch-up sessions, keeping the same finish available when matching painted sections across a project.
XY acrylic colours
X-28 Park Green Gloss, acrylic paint, 10 ml
300081528€3.591 l = €359.00
X-28 Park Green Gloss is an X-Acrylic brush paint for plastic model building, supplied in a 10 ml jar and formulated to lay down a glossy green finish on selected parts and painted sections. The Park Green shade gives model surfaces a distinct colour accent, whether it is used on trim, body details or small scenic elements that need a clean, even tone. The compact 10 ml size keeps the paint easy to store on a hobby bench and practical for detail-focused work where only a measured amount is needed. As part of the X-Acrylic range, this paint is positioned for brush application rather than broad spray coverage, which helps when working around edges, raised moulding and smaller components. The gloss finish changes how light sits on the painted area, making colour breaks and highlighted sections read more clearly on the completed build. On plastic model projects, that can help separate visual zones and sharpen the final presentation of panels or accessories. Used during a build, repaint or touch-up session, X-28 Park Green Gloss fits naturally into careful bench work where colour choice matters as much as placement. It suits focused painting passes on individual parts, accent sections and finishing details that complete the overall look of a model.
XY acrylic colours
X-31 Titanium Gold Gloss, acrylic paint, 23 ml
300081031€6.291 l = €273.48
X-31 Titanium Gold Gloss brings a metallic gold tone and a glossy finish to plastic model building, giving trim, mechanical details and highlighted panels a brighter visual break from surrounding colours. The 23 ml jar suits brush work where smaller areas, edges and picked-out parts need measured application rather than broad coverage. This acrylic resin paint is identified in the data as a brush paint for plastic model building. The liquid formula has a density of 1 g/mL at 23°C, with a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The safety data names pigments, binders and solvents in the mixture, and the colour is stated as golden with an alcohol odour. These details make it a focused finishing material for model surfaces that need metallic contrast, whether on body accents, interior sections or separate fitted components. On the workbench, the gloss sheen helps metallic areas catch the light on display pieces and painted assemblies. Used across repeated sessions, the jar size supports consistent colour matching on touch-ups, secondary parts and small grouped details within the same project.
XY acrylic colours
X-9 Brown Gloss, acrylic paint, 10 ml jar
300081509€3.591 l = €359.00
X-9 Brown Gloss is an acrylic resin paint for model making that pairs a brown color tone with a gloss finish in a 10 ml jar. The brush-applied formula suits careful work on smaller parts, trim sections and selected panels where a clean coated surface helps details read more clearly. Within a paint range used for scale builds, this shade supports controlled color placement on accessories, interior areas and weathered elements that benefit from a darker brown note. The liquid paint has a density of 1 g/ml at 23 °C, and the safety data identifies it as a flammable mixture with a flash point of 31-33 °C. The same data lists alcohol-like odor and names the mixture as suitable for plastic model building. For storage and handling, the container should be kept closed and away from heat sources. On the workbench, the 10 ml size fits projects that call for precise brush painting rather than large-area coverage. It works well when a build needs selective contrast on cockpit parts, equipment pieces or scenic details, and the gloss surface can be left as painted or used as a base for further finishing steps.
XY acrylic colours
XF-12 Flat Japanese Navy Grey, acrylic paint
300081312€5.491 l = €238.70
XF-12 Flat Japanese Navy Grey brings a muted military shade into model finishing with a 23 ml jar sized for repeated bench use. The flat finish keeps reflections low on painted surfaces, which helps scale subjects retain a more authentic visual character across panels, structures and smaller fitted parts. The acrylic formula suits controlled colour work where clean placement matters. It can be used for broad painted areas, edge work and small corrections on assembled sections or separate components. The Flat Japanese Navy Grey tone fits projects that call for restrained naval styling rather than a glossy or vivid surface effect. The jar format keeps the paint contained between sessions and easy to organise alongside other colours in a modelling setup. On the workbench, XF-12 supports everything from single-part touch-ups to full colour stages on ships, aircraft or other scale subjects that use grey military tones. It also works well when a build needs consistent colour across multiple sections, so separate painted parts can be brought together with a uniform finish.
XY acrylic colours
XF-17 Flat Sea Blue, acrylic paint, 10 ml
300081717€3.591 l = €359.00
XF-17 Flat Sea Blue is an acrylic paint for model finishing, supplied in a 10 ml jar and formulated for a flat, matt blue result. The muted Sea Blue shade suits scale surfaces that call for reduced shine, whether the goal is a uniform base coat, a colour correction or a carefully placed detail on smaller sections. The paint is listed as liquid and blue in the safety data sheet, with an alcohol odour and a volatile organic compound content of 34.5 wt-%. The same document identifies the mixture as flammable liquid category 3 and states hazard classes for eye irritation and inhalation, so handling belongs in well ventilated spaces with the stated precautions. A flash point of 33°C and UN 1263 transport classification underline that this is a solvent-containing hobby paint rather than a general craft colour. On the workbench, the 10 ml size fits targeted paint sessions, touch-up work and small-area finishing without taking much storage space. Flat Sea Blue can be used to refine panel sections, equipment parts and other scale details where a non-gloss blue tone is needed for a more restrained painted surface.
XY acrylic colours
XF-17 Flat Sea Blue, acrylic paint, 23 ml
300081317€5.491 l = €238.70
XF-17 Flat Sea Blue brings a matte sea blue tone to model finishing in a 23 ml acrylic paint jar, giving builders a clearly defined shade for naval subjects, aircraft accents and custom body details. The compact jar format keeps the color close at hand on the workbench when small sections, trim areas or layered paint steps call for controlled application. As an acrylic hobby paint, XF-17 is suited to detail-focused finishing where clean placement matters more than broad coverage. The shade code stays visible for repeat use across matching parts, later touch-ups or a second build that needs the same color reference. The safety data identifies the paint as a liquid with an alcohol odor and lists a flash point of 33°C. Hazard labeling also states that the mixture is flammable, may cause serious eye irritation and is harmful if inhaled, so use belongs in well-ventilated spaces with appropriate eye and hand protection. On the bench, the matte sea blue tone fits into careful paint sessions for hull sections, interior accents or scale accessories where a flat finish avoids unwanted shine. The 23 ml content also works well for keeping a dedicated shade ready for repeat detailing, color correction and small-area refinements across ongoing model projects.
XY acrylic colours
XF-21 Flat Sky, acrylic paint, 23 ml jar
300081321€5.491 l = €238.70
XF-21 Flat Sky is an acrylic paint for scale model finishing, supplied in a 23 ml jar that keeps the shade clearly identified and close at hand during detail work. The Flat Sky tone and flat surface effect suit builds that call for a muted, low-sheen colour rather than a reflective finish, whether the focus is a cockpit section, an exterior panel or a small correction after assembly. The acrylic formula supports measured brush application on selected areas where clean edges and controlled coverage matter. The 23 ml volume gives a practical amount for repeated touch-ups, small parts and colour matching across separate sections of the same build. The jar format also helps keep the paint organised on the bench, with the XF-21 code and Flat Sky name easy to spot when several shades are in use. The source data identifies hazard pictograms for flammable material and warning handling information, so the paint should be used with appropriate care during model-making sessions. On the workbench, XF-21 Flat Sky fits naturally into painting stages that move between base coating, detail correction and final visual balancing. It also works well when a build calls for the same muted shade on more than one component, helping separate painted sections stay visually consistent across the finished model.
XY acrylic colours
XF-27 Flat Black Green, acrylic paint, 10 ml
300081727€3.591 l = €359.00
XF-27 Flat Black Green brings a subdued dark green shade to scale modelling work in a compact 10 ml acrylic paint jar. The colour suits projects that call for a low-sheen, restrained finish, whether the goal is covering small exterior sections, refining cockpit details or adding contrast to equipment and scenery parts on the workbench. The acrylic formulation makes this paint a practical choice for controlled application on model surfaces where neat edges and measured coverage matter. The XF-27 code keeps the shade easy to identify when planning a build, returning to a project later or matching the same colour across separate stages. In a paint rack or tool drawer, the 10 ml size stays easy to store alongside other modelling supplies while still offering enough paint for repeated detail use. The Flat Black Green tone works especially well where a darker green is needed instead of a brighter field shade. On armour builds, aircraft details, diorama elements or scale vehicle accessories, this colour can be used to define smaller sections and deepen the visual balance of a finished model. It also fits touch-up tasks and selective repainting where a full-size paint container would be more than the job requires.
XY acrylic colours
XF-5 Flat Green, acrylic paint, 23 ml jar
300081305€5.491 l = €238.70
XF-5 Flat Green is an acrylic paint in a 23 ml jar, giving scale builders a ready-mixed colour for controlled brush work and focused paint sessions at the bench. The flat finish keeps the colour muted on the surface, which suits equipment details, field accessories and other areas where a non-gloss look fits the subject. The 23 ml size is easy to keep within reach during repeat use, whether the task is covering a small section, refreshing an earlier build or matching added parts on a later session. As part of the Models Supplies range, this paint fits naturally into a workshop setup built around core colours and steady, repeatable results. The XF designation and Flat Green name make the shade easy to identify among stored paints when several jars are in rotation. The acrylic format also makes this jar a straightforward choice for precise colour placement on smaller model areas. On the workbench, XF-5 Flat Green suits detail passes on utility shapes, equipment pieces and other components that need a subdued green tone. It also works well as a keep-on-hand shade for ongoing model maintenance, touch-ups and finishing steps across multiple builds.
XY acrylic colours
XF-71 Cockpit Green, acrylic paint, 23 ml
300081371€5.491 l = €238.70
XF-71 Cockpit Green brings a defined interior shade to scale modelling work, with 23 ml of acrylic paint supplied for careful brush application on cockpit areas, panels and smaller fitted sections. The colour name points directly to its intended tone, helping a build stay visually consistent where interior parts need a specific green rather than a broad general-purpose colour. The acrylic formula suits controlled coverage on fine surfaces where edges, recesses and moulded detail call for measured paint placement. In a modelling setup, the 23 ml jar is sized for repeated use across touch-ups, secondary parts and matching interior sections on the same project. The compact format also fits neatly into a paint rack or workbench drawer alongside other colour references, keeping the selected shade close at hand during staged finishing work. Used during cockpit detailing, restoration of painted sections or colour matching on interior assemblies, XF-71 Cockpit Green supports steady progress through focused finishing steps. It also works well when a build returns to the bench for later corrections, added depth on raised detail or a fresh coat on smaller components.
XY acrylic colours
XF-76 IJN Flat Gray Green, acrylic paint, 10 ml
300081776€3.591 l = €359.00
XF-76 IJN Flat Gray Green is an acrylic paint for model finishing, supplied in a 10 ml jar and identified by the XF-76 shade code. The flat gray green tone suits projects that call for a subdued, non-gloss colour layer, whether for careful brush application on small sections or for refining painted details after the main build is complete. The clearly marked colour name and code help keep paint selection consistent across planned modelling work, especially when several shades are prepared in advance for a specific scheme. As part of the XF acrylic paint range, this jar fits naturally into hobby benches where colours are chosen by code rather than by approximation. The 10 ml content is compact to store and easy to handle during focused painting sessions. The flat finish keeps the surface visually restrained, which suits scale subjects where shine would look out of place. Hazard pictograms shown for the paint indicate that careful handling is required during use and storage. On the bench, this shade works well for detail passes, touch-ups and controlled coverage on smaller areas where colour placement matters. It also suits builders who keep dedicated jars ready for repeat corrections, panel work or finishing steps across multiple model projects.
XY acrylic colours
XF-83 Flat Medium Sea Grey 2, acrylic paint
300081783€3.791 l = €379.00
XF-83 Flat Medium Sea Grey 2 is an acrylic paint developed for model finishing, supplied in a 10 ml jar for controlled use on smaller sections and detail-focused paint work. The flat colour tone suits builds that call for a subdued surface appearance, with the RAF designation in the name giving a clear reference point for historically matched schemes. The compact 10 ml format fits neatly into bench setups where several shades are kept close at hand for staged painting, touch-ups and careful colour planning. Acrylic paint is well suited to fine brush work on edges, panels and smaller components where measured application matters more than broad coverage. The Flat Medium Sea Grey 2 shade can be used to refine camouflage layouts, restore worn sections on an existing build or complete individual assemblies before final integration with the rest of the model. On aircraft projects, military subjects and other scale builds that rely on specific colour placement, XF-83 supports a focused finishing process with a clearly identified shade. The jar size also makes it practical for keeping reference colours available for repeat work across multiple sessions at the workbench.
XY acrylic colours
XF-88 Flat Dark Yellow 2, acrylic paint, 10 ml
300081788€3.791 l = €379.00
XF-88 Flat Dark Yellow 2 is a 10 ml acrylic paint made for model finishing where a specific shade matters as much as neat application. The compact jar format keeps the colour close at hand on the workbench for detail painting, small corrections and carefully defined sections that need a flat, non-gloss appearance. Within the XF acrylic range, this shade gives builders a named reference instead of a broad colour family, which helps when matching instructions, refining camouflage areas or separating adjacent painted zones with more control. The 10 ml content suits projects that call for measured use rather than bulk volume, and the acrylic medium fits hobby painting tasks where brush-applied colour and tidy edge work are part of the process. The Flat Dark Yellow 2 tone also works well in finishing sequences that combine base colour, shading and weathering, because a matte surface reads cleanly on scale subjects. On the bench, this paint supports focused jobs such as picking out panels, refreshing worn sections on an older build or adding a distinct colour note to accessories and body details. It also fits organised paint racks and travel tool cases where smaller jars help keep a modelling setup compact while still covering a wide colour range.
XY acrylic colours
XF-90 Flat Red-Brown 2, acrylic paint, 10 ml
300081790€3.791 l = €379.00
XF-90 Flat Red-Brown 2 brings a muted, earthy tone to scale finishing work in a compact 10 ml paint jar. The acrylic formula suits controlled application on smaller model sections, where a flat surface appearance helps panel details, interior areas and weathered effects read more naturally under light. The red-brown colour sits well in projects that call for subdued contrast rather than a bright accent, and the flat finish avoids reflective shine on surfaces meant to look worn, coated or utilitarian. In a paint range, a 10 ml jar is practical for targeted use on trim, equipment parts and selective colour blocking without taking up much bench space. The XF designation also helps keep colour planning organised when several shades are used across the same build. On the workbench, this shade fits careful brush painting, touch-up passes and finishing steps after main assembly. It can be used to pick out recessed areas, add tonal variation to accessories or refine sections that need a darker earth note within a broader camouflage or utility palette.
AS spray colours
AS-22 Flat Dark Earth, spray paint, 100 ml
300086522€12.291 l = €122.90
AS-22 Flat Dark Earth brings a matte brown tone to scale model finishing in a 100 ml spray can, giving larger surfaces a consistent coat and a clean, even appearance during paint work. The spray format suits broad body panels and shaped exterior sections where brush marks would interrupt the final look. The AS paint designation identifies this shade clearly within a colour plan, which helps when a build calls for a specific earth-toned finish or later matching work on the same model. Flat Dark Earth reads as a muted, non-gloss colour, making it suitable for military subjects, field equipment themes, and other schemes that rely on a restrained surface effect. The aerosol application supports steady coverage across contours, edges, and recessed areas when used as part of a model painting routine. On the workbench, this 100 ml can fits projects that need a dedicated base colour as well as follow-up correction on individual sections. It suits builders who prepare, paint, and refine scale models in stages, keeping the chosen AS-22 tone available for continued finishing work across the same project.
AS spray colours
AS-29 Flat Grey Green, spray paint, 100 ml
300086529€12.291 l = €122.90
AS-29 Flat Grey Green is a 100 ml spray paint created for model finishing where a muted, flat colour is needed across larger exterior surfaces. The spray format supports fast, even application on shells, panels and shaped parts, helping builders lay down a consistent coat with the subdued look that suits scale subjects. The Flat Grey Green tone fits especially well where military, aircraft or utility vehicle colour schemes call for a restrained, non-gloss finish. In model work, that flatter surface appearance can reduce the visual harshness that a shiny coat brings to scale details, so panel lines, contours and overall proportions read more naturally. The aerosol format also helps carry colour into edges, curves and recessed areas that are harder to cover evenly with a brush. On the bench, this paint suits new colour work, touch-ups and repainting of individual sections that need to stay visually consistent with the rest of the build. The 100 ml can size gives enough material for repeated finishing sessions across different model projects or for keeping a specific reference shade close at hand.
AS spray colours
AS-7 Flat Natural Grey, paint spray, 100 ml
300086507€12.291 l = €122.90
AS-7 Flat Natural Grey (USAAF) is a 100 ml paint spray for model finishing, combining a military grey tone with the speed and reach of aerosol application. The flat finish keeps the painted surface free from shine, which suits aircraft subjects and other builds that call for a subdued colour impression. The AS-7 designation gives builders a specific reference when matching paint steps across a project or returning later for additional coats. Aerosol delivery helps lay colour across wider sections more quickly than hand brushing, especially on wings, fuselage panels and other broad model surfaces. The 100 ml can size offers a practical amount for planned paint sessions, whether covering a main exterior colour or handling smaller correction work after assembly. The colour name Flat Natural Grey (USAAF) points to a defined shade within the range rather than a generic grey, which helps when a build calls for a precise paint selection. On the bench, the spray format suits primed parts that need an even outer coat before decals or further finishing stages. It also fits repainting individual sections where a uniform flat grey surface is needed to keep the overall model appearance consistent.
AS spray colours
AS-9 Flat Dark Green RAF, paint spray, 100 ml
300086509€12.291 l = €122.90
AS-9 Flat Dark Green RAF brings a military aircraft colour tone into a 100 ml spray can that suits broad, even coverage on scale model surfaces. The flat finish keeps reflections low, so panel shapes and camouflage areas read cleanly once the paint has dried. The spray format helps cover larger sections faster than hand brushing and supports a more uniform layer across wings, fuselage parts and other exterior components. As part of the AS paint range, this shade is positioned for aircraft modelling and colour-specific finishing work. The can is labelled AS-9, which makes it easy to identify the exact tone during workshop storage or when matching later touch-up work. Hazard pictograms on the pack indicate that careful handling is required during use and storage. Paints are required separately only as needed for other colours in a build. On the bench, AS-9 Flat Dark Green RAF fits naturally into camouflage layouts, repainting tasks and correction work after sanding or surface preparation. It also serves as a dedicated colour option for builders who keep several aircraft shades ready for staged painting across different model projects.
Brushes & accessories
HG II Flat Brush Small, modeling brush, flat tip
300087214€10.79
The HG II Flat Brush Small brings a controlled flat painting edge to model work, combining very fine PBT resin bristles with a soft, smooth brushstroke. The small flat shape gives clear contact on straight edges, compact panels and other narrow areas where even paint placement matters. A shiny metal ferrule secures the bristle head to the slim black handle, creating a clean transition that supports careful loading and placement of paint. Laser-engraved handle markings identify the brush as MODELING BRUSH HG II and show the size in Japanese, which helps separate it from other tools during longer painting sessions. The handle material is solvent-resistant, a practical match for hobby paint work where repeated contact with common modeling media can occur. At the rear, the handle end incorporates a stopper that helps keep the brush from rolling across the bench and reduces the chance of the bristles touching the work surface. If that shape is not needed in a particular tool setup, the stopper can be cut off with side cutters. On a painting station beside jars, palettes and parts trays, the small flat tip supports neat coverage on trim, body sections and other scale model details that benefit from a straight, even stroke.
Lacquer colours
LP-10 Lacquer Thinner, model paint thinner
300082110€3.491 l = €349.00
LP-10 Lacquer Thinner is a 10 ml thinner for model paint work, sized for controlled mixing and small, deliberate adjustments at the workbench. The compact bottle format suits detail-focused finishing sessions where only a limited amount is needed for a colour cup, palette well or test batch. Used with lacquer paint, LP-10 helps adapt paint consistency to the chosen application method. Small measured amounts make it easier to prepare paint for fine brush coverage, careful edge work or airbrush passes on model surfaces. The 10 ml content also suits occasional correction work, where a full-size thinner bottle would be more than the task requires. In a hobby setup with several colours in use, the smaller volume keeps paint preparation focused and easy to portion. On the bench, LP-10 fits naturally beside paints, mixing tools and in-progress parts during body finishing, detail painting or small retouching steps. The bottle size works well for test applications before a full coat, and for short sessions where paint flow needs a precise adjustment rather than a broad change across a large batch.
Lacquer colours
LP-15 IJN Gray Yokosuka Arsenal, paint, flat
300082115€3.491 l = €349.00
LP-15 IJN Gray Yokosuka Arsenal is a flat paint from the LP Paint range, supplied in a 10 ml bottle for model finishing and detail work. The muted grey tone suits historically styled aircraft and related scale subjects where a low-sheen surface helps preserve the look of service equipment rather than a glossy display finish. As part of the LP line, this colour is intended for controlled application on smaller sections as well as broader painted areas, depending on the technique used. The Yokosuka Arsenal designation gives the shade a specific reference point within Japanese naval aviation colour schemes, which matters when a build calls for more than a generic grey. The flat surface also works well where washes, panel accents or layered weathering need a less reflective base. On cockpit sections, exterior panels or equipment details, the 10 ml volume supports careful brush work and measured paint use. On the workbench, this paint fits naturally into aircraft finishing sessions, correction work after assembly, or selective repainting of individual parts. It also suits builders refining colour separation across a larger project where a dedicated arsenal shade helps keep the final appearance consistent.
Lacquer colours
LP-18 Hull Red, lacquer paint, 10 ml jar
300082118€3.491 l = €349.00
LP-18 Hull Red is a lacquer paint for scale modelling, supplied in a 10 ml jar and finished in a flat red tone. The muted surface appearance suits areas where a lower-sheen coating fits the subject better than a glossy layer, such as ship hull sections, structural parts or weathered vehicle details seen under workshop light. Within the LP paint range, the LP-18 code gives a clear reference for repeatable colour choice across separate builds and later touch-ups. The jar format keeps the paint ready for measured use on smaller sections, trim areas and detail passes where colour placement needs control. As a lacquer paint, it fits modelling workflows that build colour in thin coats and refine the final look through layering, masking and contrast with neighbouring shades. On the bench, this shade works where a subdued red is needed to break up larger colour blocks or define lower body areas with a more restrained finish. It also suits projects that call for consistent repainting of the same section at a later stage, because the LP-18 reference stays tied to the exact colour designation rather than a generic red label.
Lacquer colours
LP-26 Dark Green (JGSDF), paint, flat 10 ml
300082126€3.491 l = €349.00
LP-26 Dark Green (JGSDF) flat brings a defined military shade to model finishing in a compact 10 ml format. The colour name points directly to JGSDF styling, giving builders a clear reference when matching painted sections to Japanese Ground Self-Defense Force subjects or related equipment details. As part of the LP paint range, this jar is suited to focused bench work where measured amounts matter. The flat surface appearance avoids a reflective look on finished areas, which helps when painting panels, accessories or smaller sections that need to sit evenly within a matte scheme. The 10 ml volume is also practical for touch-up work, selective coverage and projects where one exact shade is needed rather than a broad mixed palette. On the workbench, LP-26 fits naturally into careful finishing sessions, from refining military vehicles to adding colour accuracy on individual parts. The compact jar size stores easily with other modelling paints and keeps a dedicated JGSDF dark green ready for the next stage of painting.
Lacquer colours
LP-30 Light Sand Flat, lacquer paint, 10 ml
300082130€3.491 l = €349.00
LP-30 Light Sand Flat brings a muted sand tone to model painting in a compact 10 ml jar, making it well suited to detail-focused finishing sessions at the workbench. The lacquer paint format gives builders a dedicated colour option for small parts, touch-ups and carefully defined painted areas where a flat surface appearance suits the subject. The shade name Light Sand Flat points to a non-gloss finish that fits weathered equipment, military subjects, scenery elements and other scale details that call for a subdued look rather than shine. The jar is marked with the LP-30 designation, which helps keep colour selection consistent across repeat sessions and multi-step paint plans. The 10 ml content is easy to store alongside other modelling supplies and practical to bring into focused bench setups where only a small amount of paint is needed at a time. On a build table, LP-30 can be used when refining surface variation, picking out smaller sections or returning to a project for later corrections. The compact jar format also suits organised paint racks, travel to club sessions and hobby spaces where clear shade identification and manageable quantities support a tidy workflow.
Lacquer colours
LP-31 Dark Green 2 Flat, paint, 10 ml
300082131€3.491 l = €349.00
LP-31 Dark Green 2 Flat brings a clearly specified IJN colour into the LP paint range in a compact 10 ml bottle. The flat finish gives painted areas a muted surface appearance, which suits scale subjects that call for reduced reflection and a more restrained visual effect on panels, equipment sections and fine exterior details. The shade name Dark Green 2 and the IJN designation give model builders a concrete reference when planning historically themed colour layouts. The 10 ml volume is easy to handle for detail work, small corrections and selective repainting on parts that need a consistent tone. Within a paint rack or workbench setup, the bottle format also stores efficiently alongside other modelling colours and finishing supplies. This makes the paint useful both for starting a new colour stage and for returning later to touch up specific sections with the same named shade. On the bench, LP-31 suits careful brush application on smaller parts, edge areas and surface accents where colour control matters. It also fits neatly into broader finishing sessions that combine base coating, detail painting and final visual balancing across a scale build.
Lacquer colours
LP-43 Pearl White Gloss, lacquer paint, 10 ml
300082143€4.491 l = €449.00
LP-43 Pearl White Gloss is a lacquer paint for model finishing, supplied in a 10 ml jar and set up for precise colour application on scale builds and detail work. The Pearl White tone combines a white base with a gloss surface, so raised lines, curved panels and shaped parts reflect light with more depth than a flat finish. The compact jar format keeps the paint amount focused on smaller painting tasks such as trim sections, touch-ups and selected body areas. On shells, accessories and formed components, the gloss effect helps bring out contours and gives clean separation between painted zones. The colour also fits layered finishing plans where a bright white with a pearlescent character is needed alongside other tones in the same build. At the workbench, LP-43 suits careful brush or airbrush-led model painting where controlled coverage matters across edges, recesses and visible surface details. It can be used when refreshing a single section or when completing the final colour treatment on a model that calls for a bright gloss white with a pearl effect.
Lacquer colours
LP-46 Pure Metallic Red, lacquer paint, 10 ml
300082146€4.491 l = €449.00
LP-46 Pure Metallic Red brings a gloss lacquer finish and a bold metallic red tone to model painting work, with 10 ml in the jar for detail-focused applications across scale builds. The colour suits parts that benefit from a brighter visual accent, such as trim sections, small accessories or selected body areas where a metallic surface changes the look of the finished build. As part of the LP paint range, this shade adds another dedicated option for builders who plan colour layouts carefully and want a distinct red with a reflective character. The 10 ml jar format fits neatly into bench storage and supports measured use during brush work or other controlled painting steps. The gloss finish leaves painted sections with a brighter surface appearance than a flat coat, which can help metallic pigment read more clearly on shaped parts and edges. On the workbench, LP-46 Pure Metallic Red suits fresh builds, repaints and small correction work where a matching metallic red is needed in a compact quantity. It also works well when a project calls for selective colour placement rather than covering large areas, keeping the focus on trim, highlights and visual contrast within the overall scheme.
Lacquer colours
LP-47 Pearl Blue, lacquer paint, gloss 10 ml
300082147€4.491 l = €449.00
LP-47 Pearl Blue brings a gloss lacquer finish to model painting in a compact 10 ml format, adding a bright blue tone with a pearl effect that catches light across shaped surfaces and small details. The colour sits well on parts that need a cleaner visual contrast, whether the aim is a full painted section or a focused accent within a larger scheme. The lacquer formula places this paint in the LP range, making it a relevant choice for builders who plan colour layouts around named shades rather than generic blue tones. Pearl Blue can be used to define trim, highlight body contours or separate visual zones on a model where a plain solid coat would read flatter. The 10 ml content keeps the jar practical for bench use, with enough paint for repeated detail sessions while remaining easy to store alongside other finishing colours. The stated gloss character also supports a brighter surface appearance when the painted area is meant to stand out. On the workbench, LP-47 fits projects that need a specific blue note for custom schemes, restoration-style colour matching or selective repainting of smaller components. It also works well when a build calls for contrast between neighbouring panels, accessories or decorative sections, letting the pearl effect shift subtly as the model is viewed from different angles.
Lacquer colours
LP-54 Flat Dark Iron, lacquer paint, 10 ml
300082154€3.491 l = €349.00
LP-54 Flat Dark Iron is a lacquer paint for scale modelling work, supplied in a 10 ml jar and matched to a dark metallic tone with a flat finish. The subdued surface effect suits parts that need a worn metal appearance rather than a reflective shine, giving painted sections a more restrained industrial character. The flat dark iron colour can be used on mechanical details, structural sections and selected accent areas where a darker metal tone helps break up larger painted surfaces. In a modelling setup, a 10 ml jar is practical for targeted coverage, test applications and repeat detail work on smaller components. The lacquer paint format makes LP-54 a dedicated finishing material within the LP range, suited to projects that call for precise colour placement instead of broad decorative coverage. On the workbench, this shade fits naturally into armour, vehicle, aircraft and machinery subjects where darker metal notes support depth and contrast. It also works well when a build needs subtle tonal variation between neighbouring parts, helping bolts, housings, exhaust areas or framework stand apart from the main body colour.
Lacquer colours
LP-55 Flat Dark Yellow 2, lacquer paint, 10 ml
300082155€3.491 l = €349.00
LP-55 Flat Dark Yellow 2 is a lacquer paint made for model finishing, with a 10 ml content size that suits focused colour application on smaller sections and detail areas. The flat surface effect keeps the result matte, giving painted parts a subdued look that avoids the shine of a gloss coat and lets the chosen colour read with a more technical, scale-minded character. The named LP-55 shade helps keep colour selection precise across planned paint schemes, especially when a build calls for a specific dark yellow tone rather than a general earth or sand colour. In practical bench use, the 10 ml jar supports measured paint use on individual components, partial repaints or accent sections where a full-size container would be unnecessary. The lacquer paint format places this colour within a finishing workflow built around clean, deliberate coverage and clearly defined surface character. On military subjects, utility vehicles, field equipment or selected body details, the matte dark yellow tone can be used to separate panels, add contrast or complete a historically styled colour layout where a flat finish suits the subject. It also works for touch-up tasks on existing painted assemblies when the same LP-55 designation is needed again for consistency across the build.
Lacquer colours
LP-66 Flat Flesh Flat 10ml, lacquer paint
300082166€3.491 l = €349.00
LP-66 Flat Flesh Flat 10ml is a lacquer paint for model finishing, with a matte Caucasian flesh tone that suits figures and other painted details where a flat skin shade is needed. The 10 ml bottle gives a compact format for bench use, and the lacquer formula is intended for both airbrush work and brush application. On larger sections, the paint can be sprayed to lay down an even coat; on smaller parts, a brush can pick out facial features, hands and other fine areas with the same colour. The finish is described as flat, so the painted surface avoids unwanted shine in places where a muted skin tone fits the subject better. A tough paint membrane makes LP-66 suitable as a basecoat, and the stated resistance to enamel paints supports follow-up stages that use enamel-based detailing or weathering. Fast drying also helps keep painting sessions moving when several subassemblies or figure parts are being finished in sequence. The bottle measures 44 mm high and 35 mm wide, matching the dimensions of the Tamiya Color Acrylic Paint Mini series. That shared footprint helps keep mixed paint ranges organised on the same stands or storage racks at the workbench. A dedicated thinner is available when the application method calls for it.
Lacquer colours
LP-67 Smoke Clear, lacquer paint, 10 ml
300082167€3.491 l = €349.00
LP-67 Smoke Clear is a lacquer paint for model finishing, supplied in a 10 ml jar and intended for applications where a transparent dark tint changes the look of a surface without fully hiding its structure. The Smoke Clear shade suits parts such as windows, light covers and selected detail areas that benefit from a darker, see-through finish. Within a model-building setup, this paint supports controlled colour layering on small components and trim sections where a solid coat would block the underlying form. The 10 ml quantity is sized for focused hobby use and fits neatly into paint racks, tool drawers or bench organisers alongside other finishing supplies. The LP designation identifies it within Tamiya's lacquer paint range, making it easy to place within an existing colour system when planning detail work, tonal variation or selective shading on scale builds. On car, aircraft, motorcycle or display models, Smoke Clear can be used to alter the visual depth of transparent parts and add contrast to selected sections that call for a darker clear tone. The small jar format also suits touch-up work and repeat sessions on ongoing projects where measured amounts of paint are more practical than a larger container.
Lacquer colours
LP-69 Clear Yellow, lacquer paint, 10 ml
300082169€3.491 l = €349.00
LP-69 Clear Yellow brings a transparent yellow finish to model work where the base surface still needs to remain visible. As a lacquer paint for plastics in a 10 ml jar, it suits small parts, selective accents and areas that call for colour tinting rather than full hiding power. The clear formula makes it useful for effects that depend on light passing through the coat, such as coloured lenses, signal sections or layered finishes on shaped plastic parts. Because it is identified as a paint for plastics, it fits common modelling tasks where surface detail, edges and moulded contours need controlled coverage. The liquid paint format supports measured use on narrow sections and helps keep colour placement focused on the intended area. In the safety data, the mixture is described as containing binders and pigments in solvents, with a solvent content of 60 to 70%. The listed flash point is -3 °C, and the label carries hazard pictograms for flammable, harmful or irritant, and corrosive handling risks. On the bench, LP-69 Clear Yellow works well for finishing passes, colour adjustments and visual effects that need a see-through yellow tone instead of a solid coat. It can be kept alongside other modelling colours for staged painting work, later corrections or matching previously painted plastic parts in the same project.
Lacquer colours
LP-73 Khaki Flat, paint, 10 ml bottle
300082173€3.491 l = €349.00
LP-73 Khaki Flat is a 10 ml brush paint for scale model finishing, set up for controlled colour work on smaller sections where a measured coat matters more than broad coverage. The flat khaki tone suits military subjects, field equipment and subdued exterior details, giving painted areas a muted surface that avoids a glossy look. The safety data identifies this paint as a liquid mixture with a flash point of -3°C and a boiling range of 77 to 190°C. It is labelled under CLP with GHS02, GHS05 and GHS07 pictograms and carries the hazard statements H225, H315, H317, H318, H336 and H412. The container should be kept tightly closed and stored in a cool, well-ventilated place. The same document lists use as Streichfarbe, meaning brush-applied paint, which makes this format suited to edging, equipment details and smaller colour zones that benefit from direct application rather than spray coverage. On the bench, the 10 ml size fits touch-up work, repeated detail sessions and colour matching across separate assemblies without opening a larger container. Khaki tones like LP-73 work well on uniforms, stowage, interior sections and weathered accessories where a restrained, flat surface helps the painted detail sit naturally within the overall finish.
Lacquer colours
LP-8 Pure Yellow, paint, gloss finish 10 ml
300082108€3.491 l = €349.00
LP-8 Pure Yellow is a gloss paint for scale model finishing, supplied in a 10 ml jar for controlled colour work on parts, panels and small assemblies. The Pure Yellow shade brings a bright, solid yellow tone to body sections, trim elements and visual accents, while the gloss finish gives painted areas a reflective surface that stands out under display lighting and on photographed builds. Within the LP paint range, the LP-8 designation gives this colour a clear reference point when matching later touch-ups or repeating the same finish across several builds. The 10 ml content suits focused paint sessions where a measured amount is useful for detail work, corrections or selected colour blocks rather than bulk coverage. The jar format keeps the paint compact on the workbench and easy to store alongside other finishing colours in the same series. This paint fits model projects that call for crisp yellow highlights, bold racing-style sections or clean contrast against darker tones. It also works well when a build needs a consistent gloss yellow across replacement parts, added details or follow-up refinements during the finishing stage.
PS spray colours
PS-11 Pink, polycarbonate spray paint, 100 ml
300086011€10.991 l = €109.90
PS-11 Pink is a spray paint for polycarbonate bodyshells, bringing a bold colour accent to RC vehicle builds in a 100 ml aerosol can. The formula is intended for clear polycarbonate surfaces used on many RC car shells, where an even sprayed coat can follow moulded lines and larger curved panels with a clean, uniform look. Used on the inside of a transparent bodyshell, polycarbonate paint lets the shell shape and surface detail stay visible through the colour layer. This makes PS-11 useful for race bodies with wheel arches, roof channels, bonnet contours or rear wing sections that need a consistent finish across changing shapes. The pink shade stands out clearly on track and in workshop builds, whether it is used as a full body colour or combined with masking for multi-colour layouts. The aerosol format also suits broad coverage on shell sections that would take longer to coat evenly by hand. PS-11 fits naturally into body finishing for RC cars, from a fresh shell waiting for its first colour to a replacement bodyshell prepared for a new look. In a hobby workspace, the can supports steady spray passes across side panels, roof areas and curved front sections where smooth colour application matters most. Warning! Not suitable for children under 14 years.
PS spray colours
PS-17 Metallic Green, spray paint, polycarbonate
300086017€10.991 l = €109.90
PS-17 Metallic Green is a spray paint for polycarbonate model surfaces, bringing a clear metallic colour option to RC bodyshell finishing and other compatible hobby applications. The aerosol can holds 100 ml, giving model builders a practical format for coating formed shells with a consistent layer while keeping the colour reference straightforward during paint selection. The formulation is specified for polycarbonate, which matters when the shell material determines the paint choice. Metallic Green adds a reflective effect that changes with light across curved rooflines, fenders and rear sections, so body contours stay visible after painting instead of flattening into a solid block of colour. In a workshop setup, the spray format helps cover larger shaped areas more efficiently than brush application, especially on shells with multiple bends, recesses and cut lines. Used on RC bodyshell projects, PS-17 fits into custom liveries, single-colour race looks or replacement paint work on worn shells. The can size works well for keeping a dedicated colour ready for touch-up sessions or for finishing a fresh body before decals and final assembly on the chassis. Warning! Not suitable for children under 14 years.
PS spray colours
PS-19 Camelyellow, polycarbonate spray paint
300086019€10.991 l = €109.90
PS-19 Camelyellow brings a bold yellow tone to polycarbonate model finishing in a spray format that covers broad body sections quickly and evenly. The aerosol can is made for hobby paint work on polycarbonate surfaces, where the correct paint type matters for clean application on curved shells and formed panels. The 100 ml net volume gives useful capacity for body painting, accent sections or colour-matched touch-up work without moving to a larger workshop container. As part of the PS paint range for polycarbonate, this spray suits RC bodyshell projects and other compatible model parts that need a dedicated coating rather than a general craft paint. The Camelyellow shade reads clearly on track-inspired colour schemes and works well for single-colour bodies, striping layouts or high-visibility sections. The can format also helps keep the paint flow consistent across larger areas such as roofs, sides and bonnet sections. On the bench, PS-19 fits naturally into the finishing stage of a model build, whether the goal is a full body colour or selected visual highlights. It also works as a practical refill choice when an existing shell needs the same Camelyellow tone again for repairs, updates or a fresh exterior coat. Warning! Not suitable for children under 14 years.
PS spray colours
PS-21 Park Green, polycarbonate spray paint
300086021€10.991 l = €109.90
PS-21 Park Green brings a solid green finish to polycarbonate model parts in a 100 ml aerosol can, making it suited to bodyshell painting where broad, even coverage matters. The spray format reaches curved sections and larger panels quickly, so clear shells can take on a uniform colour coat with fewer passes than brush application. This paint is specified for polycarbonate, a common material for RC car bodies and similar transparent model components that need a flexible colour layer on the inside surface. The Park Green shade works for single-colour schemes, racing liveries and restoration of worn shells where an existing finish needs renewal. As an aerosol, the can supports continuous passes across roofs, sides and arches, which helps maintain a consistent visual result over larger areas. The 100 ml content gives a practical amount for hobby bench use without shifting into oversized workshop packaging. On the workbench, PS-21 Park Green fits body finishing sessions for RC shells, replacement panels and other polycarbonate parts that need a dedicated spray colour. It also suits builders planning a fresh livery before decals and detail work are added in later finishing steps. Warning! Not suitable for children under 14 years.
PS spray colours
PS-22 British Racing Green, spray paint, 100 ml
300086022€10.991 l = €109.90
PS-22 British Racing Green brings a classic motorsport shade to polycarbonate body painting, with a spray format that suits the sweeping curves, rooflines and wheel openings common on RC bodyshells. The 100 ml can gives model builders a practical amount for shell finishing work while keeping colour choice clear through the PS-22 designation and matching green cap. This paint is specified for polycarbonate, making it suitable for clear formed shells used in many RC car builds rather than for general brush application on mixed hobby surfaces. The aerosol format helps lay colour across broad panels in smooth passes and reaches moulded recesses, window surrounds and tighter contours that are awkward to cover evenly with a brush. British Racing Green is a strong choice for period racing themes, understated single-colour bodies and darker contrast sections within multi-colour schemes. The can is marked as an air spray with 100 ml net volume and made in Japan. On the workbench, PS-22 fits naturally into shell preparation and livery planning, whether the goal is a full body colour or selected accent areas on a polycarbonate build. It also works well when several body colours are organised by code, letting the PS-22 marking serve as a quick reference during masking and painting sessions. Warning! Not suitable for children under 14 years.
PS spray colours
PS-27 Fluorescent Yellow, polycarbonate spray paint
300086027€11.491 l = €114.90
PS-27 Fluorescent Yellow is a spray paint for polycarbonate model bodies, created for hobby finishing work where the coating needs to match the shell material. The 100 ml aerosol format makes it practical for covering larger curved sections as well as narrower edges and contour lines on clear bodyshells. The fluorescent yellow tone brings a bright, track-ready look to RC car shells and other polycarbonate model parts. Used on the inside of a clear body shell, this type of paint supports the crisp, protected colour presentation model builders look for on racing and custom designs. The aerosol can format allows the paint to be applied in light passes across wheel arches, roof sections and side panels. This makes it useful for full-body colour layouts, contrasting sections or repairs to an existing finish where the same PS colour is needed. On the workbench, PS-27 fits naturally into body painting sessions focused on shell preparation, masking and layered colour planning. It suits builders refining a fresh bodyshell for track use, updating an older RC shell, or adding a fluorescent accent to a new livery with a colour that remains easy to spot at a glance. Warning! Not suitable for children under 14 years.
PS spray colours
PS-28 Fluorescent Green, spray paint, 100 ml
300086028€11.491 l = €114.90
PS-28 Fluorescent Green brings a vivid spray finish to polycarbonate model parts, combining a bright colour tone with the quick, even application of an aerosol can. On clear RC bodyshells, the shade reads strongly through the shell and gives racing lines, roof sections and side panels a sharp visual presence. The formula is specified for polycarbonate, making it suitable for model surfaces that need a dedicated coating rather than general craft paint. The can contains 100 ml, a practical volume for covering individual sections or complete smaller shells while still allowing layered application where deeper colour density is needed. The aerosol format helps distribute paint across broad curves, recessed areas and moulded details with fewer brush marks or pooling effects than hand painting. Within a custom paint scheme, Fluorescent Green works as a full-body colour or as a contrasting accent on wings, roof panels and graphic sections. In workshop use, the spray fits naturally into body finishing for RC cars and other polycarbonate model parts, especially when a build calls for a strong, track-ready colour presence. It also suits refresh work on existing shells where a single bright tone can quickly change the overall look of the model. Warning! Not suitable for children under 14 years.
PS spray colours
PS-37 Translucent Red, polycarbonate spray paint
300086037€10.991 l = €109.90
PS-37 Translucent Red is a polycarbonate spray paint developed for model finishing, with a transparent red tone that keeps the character of the bodyshell visible beneath the colour layer. The aerosol can holds 100 ml, giving a practical format for coating larger curved sections as well as tighter contours around arches, pillars and roof edges. Because the colour is translucent, the final look depends on the layer beneath it as well as the spray coat itself. For colours PS-37 to PS-40, backing with PS-41 Light Silver is recommended, which helps bring out a brighter, more luminous result. This makes PS-37 useful for shells that rely on layered paintwork rather than a flat opaque finish. On polycarbonate RC bodies, the transparent red tone can preserve moulded lines and window masking transitions instead of covering them with a solid block of colour. In workshop use, the spray format supports steady passes across broad panels and controlled coverage on shaped sections where a brush would leave a different finish. It suits body painting sessions focused on colour depth, masked graphics and custom race-inspired liveries on polycarbonate shells and similar model parts. Warning! Not suitable for children under 14 years.
PS spray colours
PS-47 Iridescent Pink-Gold, Polycarbonate Spray
300086047€14.691 l = €146.90
PS-47 Iridescent Pink-Gold Polycarbonate Spray brings a shifting colour effect to clear model shells, combining a dedicated polycarbonate formula with an aerosol can that is easy to apply across broad body panels and tight curves. The pink-gold tone changes with the viewing angle, giving RC bodywork a finish that looks different along the roof, sides and fenders as the shell moves under light. The 100 ml can is sized for hobby paint work and is intended for polycarbonate surfaces rather than general household use. The product data recommends PS-5 black when painting with this colour, a backing step that deepens the effect behind the iridescent layer and changes how the final tone reads through the shell. This makes the paint especially useful on transparent bodies where the inside-applied colour and backing coat work together. The aerosol format helps carry colour into recessed contours and around cut lines without switching tools mid-session. In a model workshop, PS-47 suits custom liveries, accent sections or full-shell colour layouts where a changing metallic tone is part of the visual plan. It can be used when refreshing an existing polycarbonate body or when finishing a new shell before decals and final assembly, keeping the paint choice aligned with RC body materials and hobby finishing methods. Warning! Not suitable for children under 14 years.
PS spray colours
PS-49 Alu-Effekt Blue, polycarbonate spray paint
300086049€18.491 l = €184.90
PS-49 Alu-Effekt Blue is a spray paint for polycarbonate model parts, supplied in a 100 ml aerosol can for smooth, controlled colour application. The metallic blue tone is suited to clear body shells where the paint is applied from the inside, leaving the outer surface glossy and the moulded shape clearly visible. The formula is specified for polycarbonate rather than general craft use, making it relevant for RC bodywork and other formed hobby shells that need a coating matched to that material. Hood lines, air intakes, wheel arch contours and other recessed or raised details remain visually defined when the colour is laid down in light, even passes. The data also recommends PS-5 black when painting with this colour, a backing coat that can deepen the final appearance and strengthen the visual effect of the metallic finish. In the workshop, the aerosol format keeps application direct and consistent across broad roof sections, curved fenders and narrow front ends without needing a brush setup. It fits repainting a fresh shell, refreshing a used bodyshell or matching separate polycarbonate parts within the same build. This paint is intended for model use, and the can carries hazard pictograms for flammable and health-related warnings, so handling should follow the precautions on the label. Warning! Not suitable for children under 14 years.
PS spray colours
PS-60 Bright Mica Red, polycarbonate spray paint
300086060€11.491 l = €114.90
PS-60 Bright Mica Red brings a bold mica finish to polycarbonate body painting, combining a strong red tone with the convenience of a 100 ml spray can for clean, even application on RC shells. The format suits broad exterior coverage and helps reach curved sections, roof panels and arch contours with a continuous spray pattern. This paint belongs to the PS spray range for polycarbonate, making it a targeted choice for bodyshell work rather than a general craft coating. The mica effect gives the red colour extra visual depth, so panel shapes and flowing lines remain defined under changing light. On racing bodies, the finish supports clear colour separation in custom schemes and adds presence to single-colour layouts. The compact can size also fits neatly into hobby bench storage alongside masking materials and other finishing supplies. Used for fresh body projects, replacement shells or a repaint, PS-60 Bright Mica Red supports detailed finishing work across many RC car styles. It suits sessions focused on colour layout, layered exterior painting and final visual detailing before decals and track use. Warning! Not suitable for children under 14 years.
PS spray colours
PS-7 Orange, polycarbonate spray paint, 100 ml
300086007€10.991 l = €109.90
PS-7 Orange brings a vivid orange finish to polycarbonate model parts, with an aerosol format that suits broad, even coverage across curved shells and shaped panels. The 100 ml can gives model builders a practical paint volume for coating bodyshell sections where brush application would struggle to stay uniform. This spray is specified for polycarbonate, making it a focused choice for RC car bodies and other clear formed parts made from the same material. The aerosol delivery helps place colour across rooflines, arches and tighter contours in a continuous pass, which supports a cleaner visual result on complex shapes. Orange works especially well for race-inspired liveries, high-contrast striping and custom body designs that need strong visibility. The can format also keeps the paint ready for workshop use without separate mixing equipment. On the bench, PS-7 Orange fits naturally into body finishing for RC projects, whether a single-colour shell is being coated or a multi-stage design is being built up panel by panel. It also suits refresh work on existing polycarbonate bodies where a clear, saturated colour is needed to change the look of a running model. Warning! Not suitable for children under 14 years.
TS spray colours
TS-1 Red Brown Flat, paint spray, 100 ml
300085001€10.491 l = €104.90
TS-1 Red Brown Flat is a 100 ml paint spray for model work that gives broad surfaces a smooth, even coat with a flat finish. The synthetic lacquer formula cures in a short time, which helps keep painting sessions moving when body shells, panels or other larger sections need full coverage in one colour. The spray format is especially useful on wide model surfaces where brush marks would interrupt the finish. TS spray paints are not affected by acrylic or enamel paints, so the main colour layer can be followed by hand-painted trim, cockpit details or small exterior accents in a separate step. The red brown flat shade brings a muted, non-gloss look that suits military tones, aged bodywork and subdued custom colour schemes. On 1/24 scale car bodies, one can provides enough paint to fully cover 2 or 3 bodies, which also makes it practical for matching replacement shells or repainting several parts in the same tone. At the workbench, the can supports fast base-coating before detail painting begins. It also fits neatly into longer build projects where bodywork, accessories and touch-up stages are handled in sequence with one consistent colour reference. Warning! Not suitable for children under 14 years.
TS spray colours
TS-100 Semi Gloss Bright Gun Metal Spray 100ml
300085100€11.491 l = €114.90
TS-100 Semi Gloss Bright Gun Metal brings a metallic semi-gloss finish to scale model painting, closely matching the shade used on the 1/24 scale Mercedes-AMG GT3 static model. The aerosol can delivers the colour in a ready-to-spray format, so broad body sections, trim pieces and selected detail areas can be coated with one consistent tone. This special acrylic resin spray is designed for modelling use and comes in a 100 ml can, giving enough paint for focused finishing work across multiple parts. The bright gun metal tone sits between a flat industrial grey and a high-shine metallic, which helps it suit body accents, vents, grilles and mechanical-looking sections where a softer sheen reads more to scale. Because the paint is supplied as an aerosol, application can be built up in light coats over curved panels and recessed shapes without switching to a brush-loaded finish. On the bench, TS-100 works well when a model calls for a darker metallic contrast against brighter body colours or clear-coated surfaces. It also suits custom projects beyond the Mercedes-AMG GT3 reference, where the same semi-gloss gun metal effect can tie together exterior details and selected components in a unified finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-15 Blue Gloss, spray paint, 100 ml aerosol
300085015€10.491 l = €104.90
TS-15 Blue Gloss brings a deep blue tone and a glossy surface to scale model work in a 100 ml aerosol format that is made for plastic parts. The spray pattern suits larger body sections, curved panels and shells where an even colour layer matters as much as the shade itself. This TS paint belongs to Tamiya Color for plastics and is identified as a special acrylic resin spray. The aerosol format helps lay down thin coats across broad surfaces, while the gloss finish gives painted sections a brighter, more reflective look than a flat colour. The can is marked for adult modelers only, and the paint is supplied in a pressurised container. Visible use guidance on the can recommends shaking vigorously, spraying from 25 to 30 cm and applying light coats before drying. These details make it easier to plan coverage on bodywork, fairings or exterior model panels where a brush-applied finish can look uneven. On the bench, TS-15 suits projects that need a solid blue base coat before markings, trim painting or a final clear layer. It can be used on single-colour sections or as part of a multi-step paint scheme where clean, even coverage across plastic surfaces is the main goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-24 Purple Gloss, spray paint, 100 ml
300085024€10.491 l = €104.90
TS-24 Purple Gloss brings a bold purple tone and a glossy surface to plastic model projects in a 100 ml spray can. The aerosol format suits larger sections where an even coat matters, such as bodyshell panels, fairings or other shaped exterior parts that benefit from smooth colour coverage. This TS paint is identified as a special acrylic resin spray for model use. The can is intended for plastics, making it a practical choice when a project calls for a uniform finish across curved surfaces, edges and recessed shapes. The gloss effect adds a polished visual character that stands out under light and gives painted parts a cleaner finished appearance. The 100 ml fill offers enough paint for substantial exterior areas while keeping the handling familiar for hobby bench work. As an aerosol paint, it is classified as flammable and the pressurised can must be handled with care. On the workbench, TS-24 Purple Gloss fits projects that need a strong single-colour statement, whether refreshing a bodyshell, finishing a custom build or adding a distinctive accent to visible plastic parts. Used on prepared surfaces in light coats, it supports a neat, consistent result across model components with complex contours. Warning! Not suitable for children under 14 years.
TS spray colours
TS-25 Pink Gloss, spray paint, 100 ml aerosol
300085025€10.491 l = €104.90
TS-25 Pink Gloss brings a bright glossy pink tone to model painting in a 100 ml aerosol format that is easy to apply across larger surfaces. The special acrylic resin spray is intended for plastics, making it a practical choice for scale model bodies and shaped parts where an even colour coat matters. The spray format helps cover curved panels, recessed sections and broad outer surfaces more quickly than hand brushing, especially when a uniform gloss look is the goal. Within the TS paint range, TS-25 serves as a distinct colour option for custom schemes, bold accent areas and full exterior coating plans. The can is labelled as an aerosol model paint and carries a net volume of 100 ml. The material information identifies it as a paint mixture with binders, pigments and solvents in a pressurised can. On the workbench, TS-25 Pink Gloss suits builders finishing plastic car bodies, fairings or detail panels that call for a vivid polished colour impression. It also fits repainting tasks, touch-up stages and coordinated multi-colour model projects where a spray-applied gloss pink shade needs to sit cleanly alongside other planned tones. Warning! Not suitable for children under 14 years.
TS spray colours
TS-3 Dark Yellow Flat, spray paint, 100 ml
300085003€10.491 l = €104.90
TS-3 Dark Yellow Flat is a 100 ml spray paint for model work that gives plastic surfaces a muted yellow-olive coat with a flat finish. The aerosol format suits broad body sections, curved panels and shaped parts where an even colour layer matters across the whole surface. This special acrylic resin spray is intended for plastics and is applied in light passes, with the can used at a recommended distance of 25 to 30 cm. The flat colour helps avoid a glossy look when a build calls for a subdued military, utility or worn appearance. The can is labelled for adult modelers only, and the paint sits in a pressurised aerosol format. The safety data identifies it as an extremely flammable aerosol, and the container must not be exposed to temperatures above 50°C. Use is stated for well ventilated areas. On the bench, TS-3 suits full body coverage, single-colour base coats and repaint work on plastic model parts. It also fits builds where a matte surface is needed before further finishing steps, letting colour placement stay consistent across larger sections and smaller formed details alike. Warning! Not suitable for children under 14 years.
TS spray colours
TS-31 Bright Orange Gloss, spray paint, 100 ml
300085031€10.491 l = €104.90
TS-31 Bright Orange Gloss brings a vivid orange tone and a glossy surface to plastic model work, with aerosol application that covers broad panels and shaped parts in a smooth, even coat. The 100 ml can suits finishing sessions where a brush would struggle to keep large surfaces visually consistent. This special acrylic resin spray is identified by the TS-31 code and is intended for plastic model surfaces. The gloss finish gives body sections, fairings and exterior details a brighter, cleaner look than a flat coat, which helps colour lines and panel shapes stand out clearly. The cap shows the paint shade for quick visual reference when matching colours across a build or planning contrast areas. As an aerosol format, it is suited to sweeping passes over shells and panels rather than detail-by-detail application with a brush. On scale model projects, the colour works well for full body coverage, bold accent areas or repainting selected exterior parts. The can is easy to keep alongside other finishing supplies for repeat touch-up work, livery planning or colour-coded builds that need a strong gloss orange presence. Warning! Not suitable for children under 14 years.
TS spray colours
TS-36 Fluorescent Red Gloss, spray paint, 100 ml
300085036€11.491 l = €114.90
TS-36 Fluorescent Red Gloss brings a vivid, high-visibility colour tone to model finishing in a 100 ml aerosol can, pairing a bright gloss surface with the fast coverage that spray application gives on larger plastic parts. On a bodyshell, fairing or exterior panel, the colour reads boldly and catches the eye under display lighting or out on a running model. This paint belongs to the TS range of special acrylic resin sprays for hobby use. The aerosol format helps lay colour across curved sections, panel contours and wider areas with a more uniform pass than hand brushing on the same surfaces. Fluorescent red suits standout liveries, accent sections and custom paint schemes where a strong visual contrast matters. The can shown for plastics aligns with common model-finishing tasks such as coating exterior shells and formed parts. As an aerosol, this paint should be handled with care and used in well-ventilated conditions. On the bench, TS-36 fits projects that need a bright gloss statement colour, from competition-inspired bodywork to display models with bold trim and panel sections. The 100 ml volume also supports layered application across several sessions when a finish calls for multiple light coats rather than one heavy pass. Warning! Not suitable for children under 14 years.
TS spray colours
TS-37 Lavender Gloss, spray paint, 100 ml
300085037€10.491 l = €104.90
TS-37 Lavender Gloss brings a vivid purple tone and a reflective finish to plastic model projects in a 100 ml aerosol format. The spray can layout suits broad, even application on curved shells, body panels and formed parts, where a brush can leave visible stroke marks across the surface. This TS colour is identified as a special acrylic resin spray for model use, with the shade code TS-37 clearly matched to Lavender Gloss. The aerosol format is designed for plastic model surfaces, making it suitable for scale car bodies, motorcycle fairings and other shaped components that benefit from a continuous coat. A gloss finish changes how light reads across edges, contours and panel shapes, so moulded lines and body forms stay visually clear after painting. The 100 ml fill also gives enough material for complete colour coverage on many single model bodies or for repeated work across smaller parts. In a hobby workspace, the can suits builders who want a fast, uniform base colour before decals, detail work or final display. It also fits repainting jobs, custom colour schemes and replacement parts that need to match a bright, polished look on plastic model assemblies. Warning! Not suitable for children under 14 years.
TS spray colours
TS-39 Mica Red, spray paint, 100 ml aerosol
300085039€10.491 l = €104.90
TS-39 Mica Red brings a vivid red tone to model painting in a 100 ml aerosol format that suits broad, even colour application. The semi gloss finish gives painted parts a clean surface appearance straight from the can, making it a strong choice for body sections, shells and other visible exterior areas. As part of the TS spray paint range, this colour is supplied as a special acrylic resin spray for hobby use. The aerosol format helps lay down colour across curved panels, edges and recessed shapes without switching tools between sections. Mica Red works especially well where a brighter, more eye-catching finish is needed on scale subjects, whether the goal is a full body colour or selected accent areas. The red cap and TS-39 marking make the shade easy to identify within a paint setup or workshop drawer. For a glossier final look, TS-13 glossy clear coat can be applied over the painted surface. On the bench, TS-39 Mica Red fits naturally into body finishing, repaint work and colour matching across model projects. It suits builders who want a spray-applied red shade for plastic model parts and other hobby surfaces that call for a smooth, consistent coat. Warning! Not suitable for children under 14 years.
TS spray colours
TS-47 Chrome Yellow Gloss, spray paint, 100 ml
300085047€10.491 l = €104.90
TS-47 Chrome Yellow Gloss brings a bright yellow tone and a glossy surface to model painting work in a 100 ml aerosol can. As a special acrylic resin spray for plastics, it is suited to coating larger sections with an even colour layer, whether the task is a body shell, exterior panel or shaped accessory part on a model build. The can is marked TAMIYA COLOR FOR PLASTICS and AIRSPRAY 100 ml net volume, placing it clearly in the finishing stage of scale modelling. The spray instructions visible on the can indicate vigorous shaking before use, application from about 25 to 30 cm and building the colour in light coats. That sequence helps the paint settle across curves, edges and recessed sections instead of flooding detail. The Chrome Yellow Gloss shade also makes it useful where a clean, high-visibility colour accent is needed within a broader paint scheme. On the bench, this spray fits projects that call for fast coverage over parts that would take longer to brush paint evenly. It can be used when matching multiple components in the same colour or when a gloss yellow finish needs to stand out on a completed model. This is an aerosol paint and should be used only with the handling precautions stated on the can. Warning! Not suitable for children under 14 years.
TS spray colours
TS-55 Dark Blue Gloss, spray paint, 100 ml
300085055€10.491 l = €104.90
TS-55 Dark Blue Gloss brings a deep blue colour coat to plastic model surfaces with the speed and reach of a 100 ml aerosol spray. The gloss finish catches light across body panels and curved parts, giving shells, fairings and other exterior sections a smooth, uniform appearance that suits display builds and race-inspired liveries. This paint belongs to the TS spray range and is identified by the TS-55 code, making it easy to match within a planned finishing scheme. The can is formulated as an acrylic resin spray for plastics, a common choice for model bodies and exterior parts that benefit from broad, even coverage. The aerosol application helps paint reach panel edges, curves and recessed shaping in one continuous pass, which is especially useful on larger sections where brush marks would interrupt the finish. Dark Blue Gloss also works well when a build needs a solid base colour before further detailing and markings are added. On the bench, TS-55 suits body shells, cowlings and other visible plastic parts that define the final look of a model. In a finishing session with multiple subassemblies prepared side by side, the spray format helps keep colour application consistent across matching parts while the gloss surface gives the completed build a crisp, polished character. Warning! Not suitable for children under 14 years.
TS spray colours
TS-65 Pearl Clear Gloss, spray paint, 100 ml
300085065€12.291 l = €122.90
TS-65 Pearl Clear Gloss is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover large surfaces with an even coat. On car bodies, fairings and other broad sections, the aerosol application supports a smooth gloss look with less interruption than hand brushing across the same area. The formula is especially useful when a build needs a clear finishing layer over larger plastic parts. The can is sized to cover 2 or 3 car model bodies in 1/24 scale, which gives a practical reference point when planning one full build or several smaller painting sessions. After the main spray coat has dried, enamel and acrylic paints can still be used for detail work because they are not affected by the TS spray layer. That makes it easier to separate broad surface coverage from later trim painting, badge work or small accent areas that need a brush. In a model workshop, TS-65 Pearl Clear Gloss fits naturally into body finishing stages where a uniform sheen matters across roofs, bonnets, doors or rear sections. It also suits projects that combine spray coverage for the main shell with hand-painted details once the larger surfaces are complete. Warning! Not suitable for children under 14 years.
TS spray colours
TS-66 IJN Grey Flat Kure Arsenal, spray paint
300085066€12.291 l = €122.90
TS-66 IJN Grey Flat Kure Arsenal is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The aerosol format helps cover larger surfaces with a consistent colour layer, whether the work focuses on a car body, a hull section or other broad exterior parts that are harder to coat evenly with a brush. The flat grey tone is named for Kure Arsenal and suits subjects that call for a restrained military finish rather than a gloss surface. Because the cured coat is not affected by acrylic or enamel paints, the main colour can be sprayed first and smaller details can be added later with other paint types. That sequence supports cleaner separation between the base coat and picked-out features. A single can holds enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, giving a clear reference point for planning larger paint jobs. On the bench, TS-66 fits projects where broad panels need fast, even coverage before finer weathering or detail painting begins. It also works well when several matching parts need the same flat grey finish across a build, helping keep the overall colour treatment consistent from the first pass to the final detail stage. Warning! Not suitable for children under 14 years.
TS spray colours
TS-74 Clear Red Gloss, paint spray, 100 ml
300085074€10.491 l = €104.90
TS-74 Clear Red Gloss is a 100 ml paint spray for model finishing, formulated as a synthetic lacquer that cures in a short time and helps cover larger surfaces with an even coat. The clear red gloss tone suits builds that need a transparent colour layer with shine, whether on body sections, light areas or selected trim where a deeper red effect is wanted. The aerosol format is especially useful when broad panels need smooth, continuous coverage that is harder to achieve with a brush on wide surfaces. One can is stated to cover 2 or 3 car model bodies in 1:24 scale, giving a concrete guide for full-body painting work. The TS paint layer also supports staged finishing, because enamel and acrylic paints can be added after the main coat to pick out smaller details. That makes the spray suitable for builders who separate the main body colour from trim, frames or fine accents during the final paint process. On the bench, the can supports fast coating of shells and body parts before detail colours are added in later steps. For display models, race cars or road car builds in 1:24 scale, TS-74 Clear Red Gloss brings a bright transparent finish that reads cleanly across larger shaped surfaces. Warning! Not suitable for children under 14 years.
TS spray colours
TS-77 Flat Flesh 2, spray paint, 100 ml
300085077€12.291 l = €122.90
TS-77 Flat Flesh 2 is a 100 ml spray paint for model finishing that brings fast coverage to larger plastic surfaces. The synthetic lacquer formula cures in a short period of time, which helps keep painting sessions moving when a body shell, fairing or broad exterior panel needs a uniform coat. This spray is especially useful when a brush would leave larger areas slower to cover or harder to keep visually consistent. The paint is intended for plastics, making it suited to many scale model assemblies where smooth, even colour across curved panels matters. One can provides enough paint to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a clear planning reference before starting a full exterior coat. After the main colour has dried, enamel and acrylic paints can be applied for smaller details, so trim, accents and fine painted sections can be added in a separate step without changing the base coat approach. On the bench, the spray format suits broad passes across bodywork and other large exterior parts where steady coverage matters most. It fits naturally into model painting routines that start with an overall colour coat and then move to finer hand-painted detail work on selected areas. Warning! Not suitable for children under 14 years.
TS spray colours
TS-89 Pearl Blue, paint spray, 100 ml aerosol
300085089€11.991 l = €119.90
TS-89 Pearl Blue is a 100 ml paint spray for model finishing, supplied in an aerosol can and formulated as part of the TS-Paint Spray range. The Pearl Blue colour is intended for smooth, even application on model surfaces, with a semi gloss finish that gives painted parts a clear, controlled sheen straight after the colour coat. The acrylic resin spray format helps cover broad areas and shaped sections with a uniform layer, which is especially useful on body shells, fairings and other curved components where brush marks would interrupt the finish. In the source data, this colour is noted for recreating the distinctive blue finish used on the 1/20 Scale Red Bull RB6 model. That makes TS-89 a focused choice when a specific motorsport shade matters, while still serving general model painting tasks that call for a pearl blue tone. For a glossier surface finish, TS-13 glossy clear coat can be applied over the painted surface. On the bench, the 100 ml can size suits planned paint sessions where several passes are needed to build colour evenly. It fits naturally into model projects that move from surface preparation to colour coating and final finishing, especially when a clean sprayed look is the goal. Warning! Not suitable for children under 14 years.
TS spray colours
TS-94 Metallic Gray, paint spray, gloss 100 ml
300085094€11.491 l = €114.90
TS-94 Metallic Gray is a gloss paint spray for plastic models that brings a clean metallic finish to larger painted sections. The 100 ml can is sized for broad coverage and is stated to fully cover 2 or 3 car bodies in 1:24 scale, making it a practical choice for complete body shells and other wide exterior parts. The formula is a synthetic lacquer that cures in a short period of time, which helps keep multi-stage paintwork moving at a steady pace. Its spray application is especially useful on large surfaces where an even coat matters across the whole panel. After the main colour has been applied and cured, enamel and acrylic paints can be used to add smaller details and contrast areas. That compatibility supports layered finishing work, with the metallic base laid down first and finer accents added later where the model calls for them. On a car body, TS-94 Metallic Gray suits full exterior coverage before window frames, trim lines or other small sections are picked out separately. It also fits bench sessions focused on repainting larger assemblies, where a gloss metallic tone and fast-curing lacquer help move the work from masking to detailing with fewer interruptions. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Master A Set, weathering palette
300087079€13.291 kg = €1,582.14
Weathering Master A Set brings 3 earth-toned finishes into a compact palette for model building: Sand, Light Sand and Mud. The makeup-style case and small applicator brush support controlled weathering work, whether the aim is a light dust veil on bodywork, dried soil around lower sections or soft tonal variation across flat panels. The set is identified for creating weathering traces in model making, using a solid mixture of binders, pigments and additives. Its palette layout keeps each tone separate for cleaner pickup and more deliberate blending, while the hinged lid helps keep the contents together between bench sessions. The tones in Set A lean toward dry ground and road-dirt effects, which suits military subjects, off-road vehicles, dioramas and other builds that benefit from surface variation beyond a plain painted finish. Used with a light brush load, the colours can be worked onto edges, recesses and surrounding detail to build up wear gradually instead of covering a surface in one pass. The compact format also fits neatly into a paint and finishing setup where repeated touch-ups, local shading and final scene matching are part of the finishing process. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Master B Set, weathering palette
300087080€13.291 kg = €1,582.14
Weathering Master B Set brings 3 focused finishing tones into one compact palette for model making: Snow, Smut and Rust. The combination supports subtle surface ageing, from cold dusted edges and soot-darkened recesses to orange-brown corrosion notes that break up flat paintwork on armour, vehicles, aircraft or scenery. The solid pigment mixture contains binder, pigments and additives, and the safety data identifies its intended use as the depiction of weathering traces in model building. Because the colours sit side by side in one case, tonal transitions can be built gradually instead of switching between separate containers. The compact format also keeps the working area tidy during detail sessions at the bench. A foam-tip applicator and a small brush are included for different contact points, so pigment can be pressed into panel lines, softened across larger areas or traced along edges and raised structures. The palette is dispersible in water, which supports controlled pickup and softer blending where the finish calls for it. On a tank hull, Rust can pick out bolts, seams and worn corners; on a locomotive roof or exhaust area, Smut can deepen heat-stained zones; on winter scenery or bodywork edges, Snow can add pale deposits and contrast. Store below 50 °C and avoid creating dust during handling. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Master D Set, model weathering palette
300087088€13.291 kg = €1,582.14
Weathering Master D Set brings 3 focused tones into one compact format for adding used, heat-marked and stained effects to scale models. Burnt Blue, Burnt Red and Oil Stain create a palette suited to exhaust areas, discoloured metal, panel edges and darker marks that break up a flat finish with more visual depth. The solid weathering compound is supplied in a hinged case with rectangular pans that keep each shade separate during use and storage. A double-ended applicator is included, pairing a sponge tip for dabbing and broader transfer with a brush for lighter sweeps and more selective placement. This layout supports gradual colour build-up rather than a single heavy pass, which helps preserve engraved lines, rivets and other fine moulded detail on the underlying model. On aircraft, armour, cars or science-fiction subjects, the set can be used to tint exhaust outlets, add oily traces around mechanical sections or vary the tone of exposed surfaces. The compact case keeps the 3 colours together on the workbench, ready for quick touch-ups between painting, decaling and final finishing steps. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Set G Figures I, weathering palette
300087126€12.491 kg = €1,486.90
Weathering Set G Figures I brings figure finishing into a compact 3-color palette made specifically for human figure models. The pigments are arranged for skin-tone work, making it easier to add gradation effects and place shadow where sculpted faces, hands and clothing need more definition at the painting bench. Set G uses Salmon, Caramel and Dark Chestnut, a combination geared toward shadowing rather than broad base coating. These tones can be layered lightly to deepen recesses, strengthen contours and separate raised detail from surrounding surfaces. The palette format keeps each color visible at a glance, which helps when moving between subtle tonal steps on the same figure. A double-ended applicator with sponge and brush gives two different ways to handle the pigment, from softer blending on larger areas to more targeted work on smaller sections. On military figures, character busts or display miniatures, the set supports finishing passes after the main paintwork is complete. It suits sessions where facial structure, knuckles, elbows or fabric folds need extra contrast, and the hinged case keeps the pigments and applicator together between uses. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-17 Pink Gloss, acrylic paint, 23 ml jar
300081017€5.491 l = €238.70
X-17 Pink Gloss brings a vivid glossy pink tone to plastic model building, giving painted sections a bright finish that stands out on body details, trim pieces and accent parts. The 23 ml jar format keeps a workable amount close at hand for repeated bench sessions where small areas need controlled colour placement. This X-Acrylic paint is identified as an acrylic resin special paint for glossy brush application, with pigments, binders and solvents forming the mixture. The safety data names it as a liquid paint for plastic model building and lists a density of 1.0 g/ml at 23 °C, with a flash point of 31 to 33 °C. The mixture contains solvents and carries hazard labelling, so handling belongs in well-ventilated spaces with care around heat and open ignition sources. For model makers planning a colour layout, the pink gloss shade can be used to pick out selected panels, decorative elements or contrasting details within a broader finish. On the workbench, the jar suits measured paint loading for brushes when smaller components need neat edges and a solid gloss coat. It also fits touch-up tasks on existing builds where a matching pink accent is needed without opening a larger paint format.
XY acrylic colours
X-20A Thinner 10ml Acrylic Paint Thinner
300081520€3.591 l = €359.00
X-20A Thinner 10 ml is a paint thinner for Tamiya acrylic and polycarbonate paints, made for controlled dilution during model finishing. The colourless liquid helps tune paint flow for fine brushwork, airbrushing and careful coverage on small parts where an even coat matters. The safety data identifies the mixture as solvent in water and lists a density of 0.93 g/ml at 20 °C, a flash point of 32 °C and partial water solubility. Those technical details matter in practical bench use, where measured amounts can be added gradually to paint instead of over-thinning a full jar. The boiling range of 97 to 174 °C and solvent content of 45% further define the handling profile of the mixture. The 10 ml size keeps the quantity compact for detail painting, local corrections and routine paint preparation alongside acrylic and polycarbonate colour work. On a modelling bench, X-20A Thinner fits the moments when paint needs a smoother pass into panel lines, edges or recessed sections. It also supports small-batch mixing for touch-up work, where a limited quantity is more useful than a large container. Keep away from heat and use only in well-ventilated areas.
XY acrylic colours
X-28 Park Green Gloss, acrylic paint, 23 ml
300081028€5.491 l = €238.70
X-28 Park Green Gloss is an X-Acrylic resin paint for plastic model building, supplied in a 23 ml jar for brush-applied colour work. The glossy Park Green shade lays down a reflective green finish that suits parts needing a cleaner, brighter surface than a flat coat, whether the goal is a full section colour or a smaller visual accent. The paint is identified in the safety data as a liquid mixture with pigments, binders and solvents, and it has a density of 1 g/mL at 23 °C. A flash point of 31-33 °C means careful handling matters during bench work, especially around heat or open ignition sources. The documented boiling range of 80-120 °C and alcohol-like odour reflect its solvent-based working character. For storage, the container should remain tightly closed in a cool, well-ventilated place. On the workbench, the 23 ml volume supports steady progress across repeated sessions, from painting trim pieces and equipment parts to covering broader body areas in one consistent shade. X-28 Park Green Gloss fits neatly into colour planning for scale builds where a vivid green gloss finish helps separate panels, highlight details or complete a specific livery concept.
XY acrylic colours
X-34 Metallic Brown Gloss, acrylic paint, 10 ml
300081534€3.791 l = €379.00
X-34 Metallic Brown Gloss brings a metallic brown tone and glossy finish to plastic model building in a compact 10 ml jar. The liquid acrylic paint is suited to brush application where small parts, trim sections and selected panels need a distinct colour accent with a reflective surface. The formula is identified as X-34 within the X-Acrylic Paint range and is described as a gloss brush paint for model work. Its brown colour is combined with metallic pigment, giving painted areas a brighter visual shift under changing light than a flat finish. The 10 ml content size fits neatly into regular modelling sessions, whether a build needs a single detail colour or repeated touch-ups across several stages. The paint is supplied as a liquid mixture with binders, pigments and solvents, and the safety data names it for use in plastic model building. On the workbench, this shade suits cockpit details, interior sections, accessories and exterior accents where a darker metallic tone adds contrast against neighbouring colours. The small jar format is easy to place beside tools and parts trays during painting sessions, and the gloss finish can help picked-out details remain visible once the model is viewed from different angles. Use only in well-ventilated areas and handle according to the hazard information on the label.
XY acrylic colours
XF-11 Flat Japanese Navy Green, acrylic paint
300081711€3.591 l = €359.00
XF-11 Flat Japanese Navy Green is an acrylic paint for model finishing, supplied in a 10 ml jar for compact storage and measured use at the workbench. The flat colour effect gives painted surfaces a muted look that suits subjects where shine would distract from panel lines, contours and scale character. The acrylic formula supports controlled application on smaller areas, making it useful for edge work, touch-ups and carefully placed colour sections on model parts. The XF-11 code keeps the shade easy to identify during repeat builds or when matching an earlier paint scheme. Flat Japanese Navy Green adds a specific military-style tone to a paint collection and helps maintain consistency across separate stages of a project. The 10 ml content also suits builders who need a dedicated colour for selected details rather than broad coverage. At the bench, this paint fits naturally into careful finishing sessions, whether the task is refining a single section or completing a full colour plan across multiple assemblies. It also works well as a stored reference shade for later corrections, additions or matching work on existing models.
XY acrylic colours
XF-19 Flat Sky Grey, acrylic paint, 10 ml
300081719€3.591 l = €359.00
XF-19 Flat Sky Grey brings a muted flat grey tone to model finishing in a compact 10 ml paint jar. The acrylic formula suits detailed colour work on scale subjects where a restrained grey shade is needed for panels, interior sections, equipment parts or subtle surface variation. The XF designation identifies this paint within the Tamiya acrylic range, making it easier to match the exact colour again when extending a build or returning for later touch-ups. Flat Sky Grey can be used where a non-gloss appearance fits the subject better than a reflective finish, and the 10 ml size keeps the colour easy to store alongside other workshop paints. The jar format also supports measured use during smaller painting steps, whether covering a single component or refining several separate sections in the same tone. On the bench, this shade fits careful finishing routines that rely on repeatable colour selection rather than guesswork. It works well for staged painting sessions, test applications on spare material and follow-up detailing after the main assembly is complete. The clearly named colour and compact volume make XF-19 a practical choice for builders who keep specific tones ready for ongoing model projects.
XY acrylic colours
XF-26 Flat Deep Green, acrylic paint, 23 ml
300081326€5.491 l = €238.70
XF-26 Flat Deep Green is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-26 colour code. The flat deep green tone gives painted sections a non-gloss appearance that suits subjects where a subdued surface is part of the intended look. Within a modelling setup, the 23 ml volume gives enough paint for repeated detail work, touch-ups and colour continuity across separate assemblies. The acrylic format supports measured brush application on smaller components, while the clearly named shade helps keep paint planning consistent when a build is completed over several sessions. The Flat Deep Green designation also makes it easier to return to the same colour later for repairs, added accessories or matching newly finished parts to earlier work. On military subjects, vehicle details or scenic elements, this shade can be used to define panels, equipment sections or terrain features with a restrained finish. During bench work, a dedicated colour like XF-26 helps keep paint selection organised, especially when several jars are in use at once and each stage of the model calls for a specific tone.
XY acrylic colours
XF-4 Yellow-Green, acrylic paint, 10 ml
300081704€3.591 l = €359.00
XF-4 Yellow-Green is an acrylic paint in a 10 ml jar, suited to model finishing where a bright yellow-green tone is needed for small sections, accents or colour separation. The compact jar size keeps the paint easy to store alongside other workshop colours and straightforward to bring into focused brush work on detailed parts. The XF series code gives this shade a clear place within the Tamiya paint system, which helps when a build calls for the same colour again at a later stage. The Yellow-Green tone can be used to pick out visual details, add contrast between neighbouring painted areas or support a specific colour scheme on scale subjects. The jar format keeps the paint contained between sessions and fits neatly into paint racks, drawers or bench organisers used for model supplies. On the workbench, this paint suits touch-up tasks, small components and carefully defined sections where a full-size container would be unnecessary. It also works well as part of a broader colour set for ongoing model projects, where clearly coded shades and manageable quantities help keep painting sessions organised and efficient.
XY acrylic colours
XF-50 Flat Field Blue, acrylic paint, 10 ml
300081750€3.591 l = €359.00
XF-50 Flat Field Blue is an acrylic paint for scale modelling work, supplied in a 10 ml jar for controlled use on smaller paint sessions, detail areas and colour corrections. The flat finish gives painted surfaces a muted look, which suits subjects where a glossy sheen would distract from panel lines, contours or weathered effects. The compact jar size helps keep colour selection focused when a build needs one specific shade rather than a large volume. Field blue can be used across model sections that call for a cooler, subdued tone, from body details and equipment parts to scenic elements in a diorama. Acrylic paint also lends itself to careful brushwork on edges, recesses and shaped surfaces where precise placement matters. The XF designation makes this shade easy to identify within a wider paint collection when matching or repeating colours across separate builds. On the workbench, XF-50 fits naturally into finishing steps such as detail painting, touch-ups and adding contrast between neighbouring parts. It also works well for keeping a consistent colour note across multiple assemblies when the same flat blue tone needs to appear in more than one area of a project.
XY acrylic colours
XF-6 Cooper, acrylic paint, 23 ml jar
300081306€5.491 l = €238.70
XF-6 Cooper is an acrylic paint for model finishing, supplied in a 23 ml jar that fits neatly into bench storage and keeps small, controlled amounts ready for repeated use. The Cooper shade brings a metallic character to painted sections, giving scale builds a warmer metal note on selected details and accent areas. The jar format supports measured dispensing during brush painting and touch-up work, where a smaller quantity helps keep colour handling controlled around fine edges and narrow sections. Acrylic paint like XF-6 is well suited to staged finishing work, whether the goal is picking out trim, refining a panel area or adding contrast to a larger painted surface. The compact container also makes colour planning easier across multi-step builds, since the shade stays clearly identified between sessions. On the workbench, XF-6 Cooper fits naturally into model painting routines that move between base colours, detail accents and final visual refinement. It can be kept close at hand for focused finishing passes on body parts, accessories or other scale components where a metallic tone adds definition. Handle with care: the provided safety information indicates flammable contents and warning labelling.
XY acrylic colours
XF-70 Flat Dark Green, acrylic paint, 23 ml
300081370€5.491 l = €238.70
XF-70 Flat Dark Green is an acrylic paint for model finishing, supplied in a 23 ml jar and identified by the XF-70 shade code. The flat surface gives painted sections a muted look that suits military subjects, equipment details and other builds where a non-gloss colour is required. The acrylic formula fits neatly into common painting routines for scale work, whether the task is covering a small panel, refining an edge or bringing separate parts into the same colour family. The named dark green tone makes repeat use easier across ongoing projects, especially when later touch-ups or matching components call for the same shade again. The compact 23 ml size also keeps the paint easy to store alongside other modelling colours while leaving the label visible for quick selection at the workbench. On vehicle models, scenery parts or accessory pieces, XF-70 can be used wherever a subdued green finish belongs in the overall colour scheme. The jar format suits careful bench work, where measured paint use and accurate shade choice matter as much as the final appearance.
XY acrylic colours
XF-75 Flat IJN Gray, acrylic paint, 10 ml
300081775€3.591 l = €359.00
XF-75 Flat IJN Gray is a 10 ml acrylic paint for model finishing, bringing a dedicated IJN Gray Kure shade to detail work, touch-ups and carefully matched color sections on scale builds. The flat finish supports a muted surface appearance that suits subjects where a non-gloss look is part of the intended result. The compact 10 ml jar fits neatly into a paint rack or workbench drawer and keeps a specific color close at hand for repeat use across separate building sessions. As an acrylic paint, XF-75 is suited to controlled application on smaller areas where edges, panels or individual components need a defined shade rather than broad coverage. The color designation Flat IJN Gray Kure gives builders a clear reference point when planning historically grounded schemes or refining an existing finish with the same tone. The jar format also makes it practical to open, use in small amounts and return to storage between stages of a build. On the bench, XF-75 works well for refining surface details, correcting small painted sections or adding the final color layer to selected components. Whether used during an initial paint plan or later for adjustments, the dedicated shade and flat character help keep the finish consistent across the model.
XY acrylic colours
XF-81 Flat Dark Green 2 RAF, acrylic paint
300081781€3.791 l = €379.00
XF-81 Flat Dark Green 2 RAF is an acrylic paint for model finishing in a 10 ml jar, bringing a defined military shade to careful brush work and small-area colour application. The flat surface effect suits subjects that call for a muted finish rather than gloss, helping painted sections sit naturally alongside panel lines, weathering and other scale details. The colour name identifies this paint as Flat Dark Green 2 RAF, which gives builders a precise reference when matching historical schemes or keeping tones consistent across separate assemblies. The jar format supports controlled dispensing on a palette and measured use during touch-ups, edging and layered coverage. Acrylic paint is also well suited to step-by-step finishing sessions where smaller amounts are applied, checked and refined before the next coat. On the workbench, a dedicated 10 ml shade helps keep frequently used colours organised by code and finish. This paint fits naturally into aircraft projects, military subjects and other builds that call for a dark green matt tone on selected panels or larger painted areas. It also works well for correction passes after masking, for repainting small sections, or for keeping a matching colour ready when a build returns to the bench later.
XY acrylic colours
XF-82 Flat Ocean Grey 2, acrylic paint, 10 ml
300081782€3.791 l = €379.00
XF-82 Flat Ocean Grey 2 is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to an RAF colour reference. The flat finish gives painted surfaces a muted, non-gloss appearance that suits military aircraft subjects and other builds where a low-sheen look is required. This shade works well when a project calls for a specific grey tone rather than a general neutral colour. The 10 ml volume keeps the jar easy to store on a workbench and practical to reopen during multi-stage painting, whether the task is base coating smaller sections, refining panel areas or correcting earlier paintwork. As an acrylic paint, XF-82 fits neatly into careful hand-painting routines where controlled coverage and clean edges matter. The clearly designated colour name also helps when matching a planned scheme across separate sessions. On the bench, this paint suits focused finishing work on aircraft models, detail passes on subassemblies and small corrections after the main colour layout is in place. It also serves as a dedicated reference shade to keep alongside other military colours when a build calls for consistent RAF-inspired tones across multiple parts.
XY acrylic colours
XF-89 Flat Dark Green 2, acrylic paint, 10 ml
300081789€3.791 l = €379.00
XF-89 Flat Dark Green 2 is an acrylic brush paint in a 10 ml jar, made for controlled colour work on scale models and small parts. The dark green tone and matt finish suit surfaces that need a flatter visual effect, whether the task is picking out equipment, refining camouflage areas or covering a small correction on an assembled build. The liquid paint format supports careful brush application on narrow edges, recessed sections and detail zones where larger tools would be less exact. In the safety data, the mixture is identified as dark green with a density of 1.2 g/mL at 23 °C and a flash point of 33 °C. The same document classifies it as a flammable liquid and states that good ventilation is required during use. These technical details matter in a hobby workspace where paint handling, drying conditions and storage all shape a clean, consistent result. On the bench, XF-89 fits naturally into finishing sessions for military subjects, field equipment and scenic elements that call for a subdued green note. It also works for touch-up passes after assembly, when a brush-applied colour can refine corners, seams and smaller fitted parts without reworking the whole surface.
AS spray colours
AS-1 Flat Dark Green, paint spray, 100 ml
300086501€12.291 l = €122.90
AS-1 Flat Dark Green is a paint spray for model finishing, supplied in a 100 ml can and specified as IJN for subjects that require this exact colour reference. The aerosol format helps cover larger exterior sections with a steady coat, giving builds a flat surface appearance that suits military aircraft and other scale projects. Within the AS paint spray range, this shade serves builders who want a dedicated dark green rather than mixing tones by hand. The flat finish reduces unwanted sheen on completed surfaces, which helps panel lines, contours and markings remain visually clear after painting. A spray can also reaches broad body sections quickly, making it useful when the goal is an even outer coat across wings, hulls or similar model parts. The 100 ml content keeps the quantity clearly defined for planning a single build or reserving paint for later corrections. On the workbench, AS-1 Flat Dark Green fits naturally into preparation, base coating and final colour application for scale modelling sessions. It can be kept alongside masking materials, primers and finishing supplies as a dedicated IJN dark green option when a project calls for a precise, ready-named shade.
AS spray colours
AS-14 Flat Olive Green, paint spray, 100 ml
300086514€12.291 l = €122.90
AS-14 Flat Olive Green (USAF) is a paint spray for model finishing, supplied in a 100 ml can for direct colour application. The flat olive tone gives painted surfaces a subdued military look that suits scale subjects where a low-sheen finish is part of the visual character. The aerosol format helps lay down colour across wider sections with a more even coat than hand brushing, especially on fuselage panels, body shells, or other broad exterior areas. The AS-14 designation gives the shade a clear reference point within a paint lineup, which helps when a build calls for the same colour again or when several stages of painting need a consistent match. As a modelling supply, this spray is intended for the finishing stage, where colour choice and surface coverage shape the final appearance of the build. On the bench, the 100 ml volume suits planned paint sessions where multiple passes may be needed to build coverage gradually. It fits naturally into aircraft, military vehicle, and other scale painting projects that call for a flat olive shade with a restrained, service-style appearance. Warning! Not suitable for children under 14 years.
AS spray colours
AS-19 Flat Intermediate Blue, paint spray, 100 ml
300086519€12.291 l = €122.90
AS-19 Flat Intermediate Blue is a paint spray for aircraft models that combines a flat finish with direct aerosol application, making it suited to broad outer surfaces where an even coat matters. The 100 ml can format keeps the colour ready for workshop use, whether the task is covering a wing section, refining a fuselage area or matching separate painted parts. The AS series is intended for aircraft finishing, and this shade is identified as Intermediate Blue for USN schemes. The aerosol nozzle releases the paint as a spray rather than a brush coat, which helps lay colour across larger panels with fewer visible transitions between passes. The can carries the Tamiya Color for Aircraft marking, placing it clearly within a model finishing range focused on aviation subjects. The flat surface effect keeps the colour subdued rather than glossy, which suits military aircraft subjects where a muted appearance is part of the final look. On the bench, the can fits naturally into painting stages such as base coating exterior panels, correcting assembled sections or bringing separate components into the same colour match. It also works well when a build calls for one consistent blue tone across wings, tail surfaces and fuselage areas in a USN aircraft scheme. Warning! Not suitable for children under 14 years.
AS spray colours
AS-2 Flat Light Grey, spray paint, 100 ml
300086502€12.291 l = €122.90
AS-2 Flat Light Grey (IJN) is a spray paint for model finishing, supplied in a 100 ml can for direct application during painting work. The flat light grey tone gives scale projects a non-gloss surface appearance, which suits subjects that call for a muted military-style colour treatment. The AS designation identifies this paint within Tamiya's spray range, and the IJN colour reference gives the shade a specific modelling context rather than a generic grey label. Spray delivery helps lay down colour across broad panels, curved sections and shaped parts with a more even pass than hand brushing alone. The flat finish keeps reflections low, which helps surface detail remain visually clear after painting. For builders planning a multi-step finish, the 100 ml volume provides enough paint for larger sections while leaving reserve for later corrections or additional coats. On the workbench, this paint fits naturally into aircraft, vehicle and other scale-model painting routines where a defined grey tone is needed. It can be used when establishing a base colour, refreshing a previously painted section or matching separate components so the finished model reads as one consistent build.
AS spray colours
AS-21 Flat Dark Green 2, aircraft spray paint
300086521€12.291 l = €122.90
AS-21 Flat Dark Green 2 is an aircraft spray paint designed for model finishing, combining a ready-to-spray aerosol format with a flat military shade that settles into an even coat across larger surfaces. The 100 ml can supports quick coverage on wings, fuselage sections and tailplanes, where brush marks can interrupt a clean scale finish. The colour designation Flat Dark Green 2 with the IJN reference gives this spray a clear role in aircraft painting projects that call for a specific dark green tone. The aerosol nozzle releases paint in a fine mist, which helps when laying down base coats, building camouflage areas or refreshing painted sections on assembled models. The flat finish also creates a suitable surface for later weathering steps and for adding markings over a non-gloss layer. As part of the Tamiya Color For Aircraft range, the can is aimed at hobby work where colour accuracy and controlled application matter. On the bench, the spray format suits builders preparing multiple airframe sections in sequence as well as single-part repainting jobs. It fits naturally into aircraft model projects that move from primed surfaces to colour coats and then on to detail finishing, with the 100 ml volume offering useful capacity for repeated workshop use.
AS spray colours
AS-23 Flat Light Green, aircraft spray paint
300086523€12.291 l = €122.90
AS-23 Flat Light Green brings a flat aircraft finish to model painting with a pressurised aerosol format and a colour reference aimed at German Air schemes. The 100 ml can lays down paint in a broad, continuous spray, which helps cover larger aircraft sections with a more consistent surface than hand brushing alone. The can is part of the AS paint range for aircraft models, so its use is focused on scale aviation subjects rather than general craft work. The flat finish keeps reflections low on completed surfaces, which suits military liveries and scale display builds. The spray nozzle releases paint directly from the can, allowing quick coverage on wings, fuselage sections and tail assemblies with fewer interruptions between passes. The labelled AS-23 colour code also makes it easier to match the same shade across separate painting stages or later touch-up work on the same build. On the bench, the aerosol format suits primed subassemblies, complete airframes and repaint work on selected sections that need the same light green tone. The can works well when a build calls for broad colour coverage before masking lines, insignia or weathering layers are added. Paint application should follow the handling and warning information printed on the container.
AS spray colours
AS-4 Flat Grey Violet, paint spray, 100 ml
300086504€12.291 l = €122.90
AS-4 Flat Grey Violet is a 100 ml paint spray for model finishing, supplied in a ready-to-use aerosol can and specified for Luftwaffe colour applications. The flat tone gives aircraft surfaces a subdued appearance that suits military subjects, especially where a matt painted finish is part of the final look. The spray format is useful when larger sections need an even coat, such as wings, fuselage panels or tail assemblies. A broad mist reaches recessed and open areas more quickly than brush application, which helps maintain a consistent colour layer across the model. The 100 ml content gives enough material for repeated finishing work on compatible builds or for returning to the same shade during later workshop sessions. The AS-4 designation also makes the colour easy to identify within a paint collection when a specific scheme is being planned. On the bench, this shade fits projects that recreate Luftwaffe aircraft markings and exterior tones, whether the task is a full repaint or selected surface coverage. It also works well when a build calls for a restrained, non-gloss visual finish that keeps panel shapes and added weathering in clear view.
AS spray colours
AS-8 Flat Navy Blue, paint spray, 100 ml
300086508€12.291 l = €122.90
AS-8 Flat Navy Blue brings a military-style colour match into model finishing with a flat surface effect and a 100 ml spray can that suits broad, even application. The US Navy shade gives aircraft and other scale subjects a restrained, non-gloss look that fits painted panels, outer surfaces and larger body sections. The aerosol format is geared to coating wider areas more quickly than brush application, which helps maintain a consistent tone across connected surfaces. Flat Navy Blue works where a subdued finish is needed rather than a reflective one, keeping the painted result visually aligned with military schemes. The 100 ml content gives enough paint for repeated use across separate stages of a build, from first colour coats to later touch-up work on matching sections. As part of the AS paint spray range, this colour sits clearly within a model-making workflow focused on surface preparation, colour accuracy and clean coverage. On the bench, the can suits painting sessions where wings, fuselage parts or hull sections need one continuous shade across multiple components. It also fits detail-led projects that call for a specific navy tone in a flat finish, whether the goal is a fresh painted look or a base for further weathering work.
Lacquer colours
LP-14 IJN Gray Maizuru Arsenal, paint, flat 10 ml
300082114€3.491 l = €349.00
LP-14 IJN Gray Maizuru Arsenal is a flat lacquer paint for scale model finishing, supplied in a 10 ml jar. The named IJN Gray Maizuru Arsenal shade gives builders a specific naval colour reference when painting ships, aircraft or other subjects that call for this tone, and the flat surface helps keep the final appearance low in sheen under display lighting. The 10 ml format suits controlled application on smaller parts, edge work and touch-ups, while still covering broader sections when a single colour area needs a consistent coat. The LP-14 code makes the shade easy to identify in paint plans and workshop storage, especially when several greys are kept side by side for different historical finishes. As a lacquer paint, it belongs in a model-making setup built around precise colour placement and clean, even coverage. On the bench, this jar fits naturally into painting sessions that move between subassemblies, detail accents and final exterior coats. The flat grey tone can be used where a subdued military finish is required, and the compact jar size keeps the colour close at hand for repeat use across ongoing builds and later corrections.
Lacquer colours
LP-16 Wooden Deck Tan, paint, flat 10 ml
300082116€3.491 l = €349.00
LP-16 Wooden Deck Tan brings a muted flat colour to scale finishing, with a 10 ml jar size that fits neatly into regular painting sessions at the bench. The Wooden Deck Tan shade suits deck areas, planked sections and other parts where a subdued, non-gloss surface is needed to keep the finish visually restrained. As part of the LP-Paint line, this paint gives model makers a clearly identified colour reference for repeatable work across separate assemblies and later touch-ups. The flat character changes how light sits on the painted surface, reducing shine and helping texture, panel lines or engraved detail remain visible after colour is applied. The compact 10 ml content also makes it practical for targeted jobs such as trim, edging and smaller scenic sections instead of broad-volume coverage. The visible LP16 designation helps with quick shelf recognition when several shades are stored together in a workshop or hobby area. On ship models, Wooden Deck Tan can be used to define deck zones and contrast them against darker hull or superstructure colours. On vehicles, structures or diorama elements, the same shade supports weathered timber effects, worn surfaces or subtle accent areas where a matte finish fits the subject better than gloss.
Lacquer colours
LP-22 Flat Base, paint, 10 ml bottle
300082122€3.491 l = €349.00
LP-22 Flat Base is a liquid paint additive in a 10 ml bottle, made for model finishing work where the surface sheen needs closer control. In paint preparation sessions, it supports a flatter look by being mixed into compatible paints rather than used as a standalone colour, which makes it useful when a build calls for a more muted surface across selected sections. Within the LP paint range, this bottle suits careful bench work on scale models, detail parts and smaller painted areas. The 10 ml content is easy to portion for test mixes, letting builders adjust the finish before moving on to larger sections of a bodyshell, interior piece or accessory. That controlled mixing approach helps keep the visual character consistent across separate components that are painted at different times. On the workbench, LP-22 Flat Base fits naturally into projects that move between broad painted panels and fine detail correction. It can be kept alongside other finishing supplies for touch-up sessions, repainting small sections or refining the final surface effect on display models and RC bodies.
Lacquer colours
LP-28 Olive Drab Flat, paint, 10 ml
300082128€3.491 l = €349.00
LP-28 Olive Drab Flat brings a subdued military-style green to model painting in a 10 ml format that suits detail work, smaller sections and carefully planned colour layouts. The flat finish keeps reflections low, so shaped panels, stowage parts and surface textures read with a more scale-focused look under display lighting or at the workbench. This shade works especially well where a build calls for restrained colour rather than gloss, and the 10 ml content helps keep the amount manageable for focused painting tasks. The LP designation gives the colour a clear reference within the range, which helps when matching the same tone across separate sessions or multiple components. On military subjects, utility equipment and field-inspired finishes, Olive Drab can be used to define contrast between painted areas and surrounding details without overpowering smaller features. At the bench, the colour suits brush-led touch-ups as well as targeted application on accessories, trim sections or individual panels where a flat surface appearance matters. It also fits projects that need a consistent muted green across several stages, whether refreshing a single section or carrying the same tone through a broader finishing plan.
Lacquer colours
LP-34 Light Gray Flat, paint, 10 ml bottle
300082134€3.491 l = €349.00
LP-34 Light Gray Flat brings a muted light gray tone to model finishing in a compact 10 ml bottle, giving builders a dedicated colour for surfaces that call for a non-gloss look. The flat finish suits subjects where reflections would distract from panel lines, moulded structure or weathered effects, and the neutral shade sits comfortably across mechanical, military and automotive themes. Within the LP paint range, this colour works well for smaller painted sections, interior areas, equipment details and selective touch-up work. The 10 ml format helps keep bench storage tidy while leaving enough paint for repeated use across more than one build. Light gray is also useful as a balancing tone beside darker shades, metallic accents or marking-heavy liveries, especially when a build needs contrast without a bright colour shift. The bottle format supports measured application for brush-led detailing and controlled coverage on defined sections. On the workbench, LP-34 fits naturally into projects that move between base colours, detail passes and final visual refinement. It can be used to pick out structural elements, break up larger colour fields or unify separate components with the same flat gray finish, keeping the overall model appearance consistent.
Lacquer colours
LP-36 Dark Ghost Gray, lacquer paint, flat 10 ml
300082136€3.491 l = €349.00
LP-36 Dark Ghost Gray is a lacquer paint in a 10 ml jar with a flat finish, suited to scale modelling work that calls for a muted grey tone rather than a reflective surface. The colour sits well on subjects with technical, military or machinery-inspired paint schemes, where a low-sheen appearance helps preserve the character of the build. The lacquer formula supports precise colour placement on model parts and smaller sections that need a controlled, even coat. A flat surface treatment can help visual details stand out by keeping glare low under hobby lighting, especially around recessed lines, shaped panels and layered components. The Dark Ghost Gray shade also fits correction work, local repainting and colour matching when a build needs one consistent grey across separate areas. The 10 ml jar size keeps the paint easy to store alongside other modelling colours and straightforward to bring into short, focused bench sessions. On the workbench, LP-36 suits careful finishing passes on exterior sections, cockpit-style details, equipment housings or mechanical accents where a subdued grey is the right visual choice. It also works well when several small parts need the same tone before final assembly, helping keep the overall colour treatment cohesive across the build.
Lacquer colours
LP-37 Light Ghost Gray, lacquer paint, flat 10 ml
300082137€3.491 l = €349.00
LP-37 Light Ghost Gray is a flat lacquer paint for model finishing, supplied in a 10 ml jar for compact storage at the workbench and measured use during detail painting. The Light Ghost Gray tone brings a restrained, technical look to scale subjects, where a non-gloss surface helps painted sections read with a more subdued finish under display lighting. Within the LP paint range, this shade suits careful colour placement on panels, equipment housings and smaller components that benefit from a low-sheen grey. The 10 ml content is easy to portion for small batches, whether the task is refining a single section, correcting a painted area or building up thin coats across selected parts. The lacquer paint format makes LP-37 a practical choice for model makers who plan colour work step by step rather than opening a large volume at once. On aircraft, military or mechanical subjects, Light Ghost Gray can be used to define contrast between neighbouring sections while keeping the overall look controlled and understated. The compact jar also stores neatly alongside other colours in a bench setup where several shades are kept close at hand for ongoing assembly, painting and finishing work.
Lacquer colours
LP-39 Racing White, paint, gloss 10 ml
300082139€3.491 l = €349.00
LP-39 Racing White is a gloss paint for model finishing work, supplied in a 10 ml bottle for controlled use on small surfaces and detailed sections. The bright white tone suits clean colour separation, sharp trim lines and painted areas that need a solid, high-visibility finish within a scale build. The gloss surface gives this shade a smooth visual character that works well on body panels, detail parts and accent sections. A 10 ml size keeps the quantity practical for bench use, touch-up tasks and focused paint application where only selected zones need coverage. Within the LP paint range, Racing White can support livery work, contrast sections and restoration of painted details on existing models. The colour name and gloss designation make it easy to match this bottle to a planned finish before painting begins. On the workbench, LP-39 Racing White suits careful brush or other model-paint application methods where a defined white shade is needed for edges, panels or small components. It also fits projects that combine several colours, allowing white sections to be added with control rather than repainting a larger area.
Lacquer colours
LP-42 Mica Red gloss, lacquer paint, 10 ml
300082142€4.491 l = €449.00
LP-42 Mica Red gloss brings a metallic red lacquer finish to scale modelling work in a clearly defined 10 ml format. The shade suits projects that call for a bright red surface with a glossy look, whether the paint is used on body sections, trim areas or smaller visual accents that need a distinct colour step. Within a model supplies setup, this paint gives builders a dedicated colour reference rather than a mixed approximation at the bench. The LP designation identifies it as part of the LP paint range, while the Mica Red name points to a finish with visible depth and light-catching character. The compact 10 ml jar is easy to store alongside other modelling colours and helps keep paint selection organised by shade code during ongoing build work. The provided hazard marking indicates that careful handling and storage are required during use. On the workbench, LP-42 Mica Red gloss fits neatly into detail painting sessions, correction work and planned colour layouts across separate model projects. It can be kept ready for repeat use when the same red tone is needed again, making it a practical choice for builders who work with consistent paint codes across multiple assemblies.
Lacquer colours
LP-45 Racing Blue, paint, gloss 10 ml
300082145€4.491 l = €449.00
LP-45 Racing Blue is a gloss paint in a 10 ml bottle, bringing a saturated blue finish to model surfaces where a clean, bright racing tone matters. The compact size suits bench setups where colour selection is deliberate and each shade has a specific role in the final look. The gloss finish gives painted areas a reflective surface that changes under light, which helps body contours, trim lines and accent sections stand out more clearly. Racing Blue works especially well when a build needs a bold single-colour section or a contrasting detail against darker or neutral tones. The LP designation also makes the shade easy to identify when matching later paintwork on the same project. The bottle format keeps the paint ready for measured use on smaller parts, touch-up work and carefully planned colour placement. On a car body, fairing or detail panel, LP-45 can define stripes, highlight edges or carry the main colour on selected sections. It also fits workshop shelves where builders organise colours by code and finish, making repeat use and project planning more straightforward.
Lacquer colours
LP-51 Pure Orange, lacquer paint, gloss 10 ml
300082151€3.491 l = €349.00
LP-51 Pure Orange brings a strong orange tone and a gloss surface to model finishing, with a 10 ml jar format that suits detail-led paint work on smaller areas. The named LP-51 reference makes the shade easy to identify when a build calls for a specific orange rather than a general colour family. Within a paint range, a clearly marked code matters during planning, touch-ups and repeat applications on matching sections. Pure Orange can be used where trim, panel sections or visual accents need a brighter contrast, and the gloss character leaves the colour with a reflective finish rather than a flat one. The compact jar size supports measured dispensing on the workbench and helps keep smaller paint sessions organised around the amount actually needed. As a model supply, this paint belongs in finishing stages where colour placement, edge definition and consistency across separate parts shape the final look. On vehicle shells, accessories or other scale components that need an orange highlight, LP-51 gives builders a direct colour option with a defined finish. It also fits bench stock for ongoing projects where a specific gloss orange is useful for corrections, added details or later matching work.
Lacquer colours
LP-72 Mica Silver, lacquer paint, gloss 10 ml
300082172€4.591 l = €459.00
LP-72 Mica Silver is a lacquer paint for plastic models that brings a gloss metallic finish to body shells, trim parts and detail sections. The Mica Silver shade gives painted surfaces a bright, reflective look that reads cleanly on scale vehicles and other model components, whether used for full coverage or for smaller accent areas. This paint comes in a 10 ml jar and belongs to the LP lacquer paint range. The formula is identified in the supplied safety data as paint for plastics, making it suited to model finishing where crisp colour placement and a smooth surface matter. The gloss effect works especially well on panels, edges and shaped parts that catch the light, while the metallic character helps separate trim lines and visual details from surrounding colours. On custom builds, the shade can be used to break up larger colour fields or to add contrast to spoilers, mirrors, vents and similar components. At the workbench, LP-72 fits projects that need a silver tone with more visual depth than a flat grey. It suits careful brush touch-ups on small areas as well as planned paint schemes on plastic model parts. For model makers refining a body shell or adding metallic definition to exterior details, this 10 ml colour adds a focused finishing option within the LP range.
Lacquer colours
LP-80 Flat Yellow, lacquer paint, 10 ml
300082180€3.491 l = €349.00
LP-80 Flat Yellow is a 10 ml lacquer paint for scale modelling work that calls for a solid yellow tone and a non-gloss surface. The compact jar size suits controlled application on smaller sections, whether the task is picking out trim, blocking in a panel or refining a colour layout on a display build. The flat finish changes how the colour reads once applied, reducing shine so edges, shapes and painted separations stay visually clear. Within the LP paint range, the LP-80 designation also makes shade selection easier during repeat projects or planned colour schemes where the same tone needs to be identified again quickly. The 10 ml content supports measured use at the workbench, especially for detail painting and targeted coverage rather than broad, high-volume coating. This makes the paint a useful bench staple for builders who work across vehicles, figures or scenic elements. On an active hobby table, LP-80 Flat Yellow can be used to define warning markings, highlight mechanical details or add contrast to darker assemblies. It also fits finishing sessions where a flat colour is chosen to keep the painted surface subdued while still giving yellow areas a clear visual role in the overall scheme.
Lacquer colours
LP-81 Mixing Blue, lacquer paint, 10 ml jar
300082181€3.59
LP-81 Mixing Blue is a lacquer paint for model finishing and colour development, supplied in a 10 ml glass jar with a ribbed screw cap. The compact jar format keeps small paint quantities easy to handle at the workbench, whether the task is brushing fine sections, preparing a measured mix, or refining a custom shade for a specific model surface. The shade is positioned as a mixing colour rather than only a ready-use finish. The product imagery shows LP-81 used in combination with LP-82 Mixing Red to create purple and with LP-83 Mixing Yellow to create green, giving builders a clear route to secondary tones from a small core palette. The glass container makes the paint level visible during mixing sessions, and the screw-top closure supports repeated opening for staged paint work across separate parts. The 10 ml content also keeps test batches practical when comparing colour variations before committing to a full painted area. On the bench, this format suits detail correction, accent sections, and custom tone preparation for scale models and hobby parts. It also fits painting sessions where only a modest amount is needed at one time, helping keep mixes focused and easier to repeat across smaller components. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-82 Mixing Red, lacquer paint, 10 ml jar
300082182€3.59
LP-82 Mixing Red brings a focused red tone to model finishing, with a 10 ml jar size that suits measured paint use on smaller parts, touch-up areas and colour adjustment work at the bench. As part of the LP lacquer paint range, it is positioned for mixing tasks where a red component needs to shift another shade toward warmer, pinker or orange-leaning results. The supplied colour information shows LP-82 used in combination with other tones to change the final appearance in a controlled way. Mixing examples indicate how red works with blue and yellow to create secondary shades such as purple and orange, making this jar useful when a standard out-of-the-bottle colour does not match the intended finish. The comparison graphics also show how adding LP-82 can alter the look of another colour toward a rosier result. That makes it a practical choice for custom liveries, detail accents and fine corrections on painted assemblies. On the workbench, the compact jar format helps keep small mixing sessions manageable and reduces waste when only a limited amount is needed for trim, markings or panel variation. Hazard pictograms shown for LP-82 identify flammable, warning and corrosive handling categories, so storage and use should follow the label guidance used for model paints and related finishing supplies. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-83 Mixing Yellow, lacquer paint, 10 ml
300082183€3.59
LP-83 Mixing Yellow is a lacquer paint for model finishing in a 10 ml jar, set up for builders who want direct control over custom colour work. The Mixing Yellow designation points to its role in blending, where small measured amounts can shift a base tone toward brighter, warmer or more vivid results on scale subjects and detail parts. Within the LP paint range, LP-83 is shown as part of a 3-colour mixing relationship with LP-81 Mixing Blue and LP-82 Mixing Red. That reference makes the working method easy to follow: yellow mixed with blue creates green, while yellow mixed with red creates orange. The glass jar format keeps the paint contained between sessions and gives a stable container for bench use during repeated test mixes. The 10 ml content also suits controlled preparation, where only a small amount is needed for trim parts, accessories or colour trials before a full application. On the workbench, LP-83 fits naturally into projects that call for adjusted tones rather than a fixed factory shade. It can be used when matching painted sections across separate assemblies, refining accent colours, or preparing a custom mix for a specific model finish. For hobby painting that depends on deliberate colour planning, this jar adds a clear yellow component to the palette. Warning! Not suitable for children under 14 years.
PS spray colours
PS-13 Gold, polycarbonate spray paint, 100 ml
300086013€10.991 l = €109.90
PS-13 Gold is a spray paint for polycarbonate bodies that brings a metallic gold finish to RC shells and other clear polycarbonate model parts. The aerosol can holds 100 ml, giving enough paint for full-body coverage or for selected sections such as roof panels, side areas and accent zones where a strong colour contrast is needed. The formula is specified for polycarbonate, which matters when painting flexible bodyshells used on RC vehicles. Applied to the inside of a clear shell, the colour shows through the body material while the outer surface keeps its smooth contour lines. This makes PS-13 useful for single-colour race bodies, custom striping layouts and layered paint schemes that rely on a bright metallic tone. The gold shade also works well for highlight sections, number-panel surrounds and visual separation between body graphics. In the workshop, the 100 ml can suits broad passes over larger panels as well as shorter bursts around arches, pillars and tighter curves. PS-13 fits naturally into body finishing sessions for touring cars, buggies, trucks and other polycarbonate RC shells where colour choice shapes the final look as much as the body design itself. Warning! Not suitable for children under 14 years.
PS spray colours
PS-14 Copper, polycarbonate spray paint, 100 ml
300086014€10.991 l = €109.90
PS-14 Copper brings a metallic copper finish to polycarbonate RC bodyshells in a 100 ml spray can that is easy to handle during painting. The aerosol format helps lay colour across broad roof sections, curved fenders and tight edges with a consistent coat, giving clear shells a defined, race-ready look. This paint is specified for polycarbonate, making it suited to the flexible clear bodies used on many RC cars. The copper shade works well for full-body colour schemes, accent sections and custom livery concepts where a warm metallic tone changes the character of the shell under light. A 100 ml volume gives enough material for planned coating work while keeping the can compact in a workshop drawer or pit box. As part of the PS paint range, it fits naturally into model finishing tasks where the body shape, panel lines and window masks guide the final visual result. On the bench, PS-14 Copper supports careful paint sessions with light passes over prepared polycarbonate shells. During race-day prep, the metallic tone gives touring, buggy and truck bodyshells a distinct presence when the body catches changing light across corners and straights. Warning! Not suitable for children under 14 years.
PS spray colours
PS-32 Corsa Grey, polycarbonate spray paint
300086032€10.991 l = €109.90
PS-32 Corsa Grey is a spray paint for polycarbonate model parts, giving RC bodyshell projects a dedicated colour coat in a 100 ml can. The spray format suits broad curved panels and shell contours, where an even pass matters for a clean exterior finish and a consistent overall tone. The paint is specified for polycarbonate rather than general craft use, which makes it relevant for clear model bodies that flex during handling and running. Corsa Grey brings a restrained, technical shade that works well on touring cars, GT bodies and other shell styles where a solid neutral colour keeps lines and graphics clear. The aerosol format also helps reach roof sections, wheel arch curves and side panels with fewer visible brush marks than hand painting. For model work that continues with decals, trim details or window masking, a uniform base colour gives the shell a clear starting point. On the bench, the 100 ml volume suits single-shell paint jobs as well as touch-up work across matching body projects. In RC body finishing, this kind of dedicated spray paint fits the stage where a clear shell starts to take on its final character through colour, masking and livery choices. Warning! Not suitable for children under 14 years.
PS spray colours
PS-39 Translucent Lightblue, spray paint, 100 ml
300086039€10.991 l = €109.90
PS-39 Translucent Lightblue is a polycarbonate spray paint developed for model finishing where a clear shell needs colour without losing its see-through character. The translucent light blue tone lets the shape of a bodyshell, canopy or other clear part remain visible, creating a tinted finish that still shows the lines and contours underneath. The 100 ml aerosol can is sized for hobby paint work on formed polycarbonate parts, where broad curves, recessed sections and raised details benefit from spray application rather than brush marks. This paint belongs to the PS range for polycarbonate, making it suited to clear RC bodyshells and similar model components that call for a dedicated shell paint. The stated colour note for PS-37 to PS-40 recommends backing with PS-41 light silver. That extra backing layer affects how the translucent shade reads through the shell and helps the final tone develop with the intended visual depth. On the bench, PS-39 fits custom body projects, replacement shell finishing and detail-led race livery work where a transparent blue effect is part of the look. It also suits canopies, window areas or accent sections that need a lighter tinted appearance instead of a solid opaque coat. Warning! Not suitable for children under 14 years.
PS spray colours
PS-40 Translucent Pink, spray paint, 100 ml
300086040€10.991 l = €109.90
PS-40 Translucent Pink brings a vivid tinted finish to polycarbonate model bodies, with a translucent effect that keeps light passing through the colour layer instead of covering the surface opaquely. On clear RC bodyshells, that creates a brighter, layered look that suits custom race graphics, accent sections and bold full-body colour schemes. The formula is specified for polycarbonate, making it suitable for the flexible shells used on many RC cars and other hobby models. The 100 ml aerosol can is sized for practical workshop use, with spray application that reaches broad roof panels, curved fenders and narrow side sections more quickly than brush painting. Because PS-40 belongs to the PS-37 to PS-40 colour group, Tamiya recommends backing it with PS-41 Light Silver. That extra backing coat helps the final shade read as intended and gives the translucent pink more presence once the shell is mounted. In a paint session, PS-40 fits naturally into multi-step body finishing, whether the goal is a single-colour shell, layered striping or window-mask designs on clear polycarbonate. It also works well when a build calls for colour depth rather than a flat solid coat, adding a distinctive tinted character to RC bodywork and other compatible model surfaces. Warning! Not suitable for children under 14 years.
PS spray colours
PS-42 Translucent Yellow, polycarbonate spray
300086042€10.491 l = €104.90
PS-42 Translucent Yellow is a spray paint for polycarbonate model surfaces, supplied in a 100 ml aerosol can for broad, even colour application. The translucent yellow tone tints the surface instead of covering it with a solid coat, so clear sections, layered effects and light-catching details stay visually present while gaining a vivid yellow cast. The formula is specified for polycarbonate, making it suited to model bodyshell work where that material needs the right paint type. The aerosol format helps distribute colour across larger curved panels as well as narrower sections that are harder to cover evenly with a brush. Because the finish is translucent, the underlying shell still plays a visible role in the final look, which opens up more scope for custom effects than an opaque colour would. The can is marked PS-42, making it easy to match the shade within an existing paint plan or a repeat build. On RC bodyshell projects, the colour can be used for full-body tinting, highlighted sections or layered visual accents on clear polycarbonate parts. It also fits hobby bench setups where a spray can is the preferred route for fast, even coverage across shaped model surfaces. Warning! Not suitable for children under 14 years.
PS spray colours
PS-43 Translucent Orange, polycarbonate spray
300086043€10.491 l = €104.90
PS-43 Translucent Orange brings a vivid tinted finish to polycarbonate model body painting, with a spray format that suits broad curves, roof sections and shaped panel areas on RC bodyshells. The translucent colour effect leaves room for light to pass through clear sections, which opens up more visual options than an opaque coat when a shell needs window tinting or layered accents. As part of the PS paint range, this aerosol is intended specifically for polycarbonate surfaces rather than general craft use. The 100 ml can gives a practical volume for shell finishing sessions, whether the goal is a full colour treatment or selected highlights on a custom livery. The cap and label identify the shade clearly as Translucent Orange, which helps when planning multi-step masking work or matching a paint stock across several builds. The can format also suits smooth passes along longer body lines where brush marks are not wanted. In a workshop setup, PS-43 fits naturally into RC body preparation alongside masking, backing colours and final detailing. It works well when a clear bodyshell needs a stained, light-passing effect on selected sections, or when a racing shell calls for a brighter custom tone that still shows depth through the material. Warning! Not suitable for children under 14 years.
PS spray colours
PS-44 Translucent Green, spray paint, 100 ml
300086044€10.491 l = €104.90
PS-44 Translucent Green is a 100 ml spray paint developed for polycarbonate model bodies and shaped for finishes where the colour layer stays light-permeable. The translucent effect gives clear shells, window areas or selected body sections a green tint that changes the look of the surface while still allowing light to pass through. The spray format helps distribute paint across curved panels and recessed shapes that are common on RC bodyshells. On clear polycarbonate, this type of finish can be used for tinted windows, layered colour work or accent zones that need a see-through appearance rather than a solid block of colour. The 100 ml can size keeps the paint easy to handle during short, controlled passes and suits focused work on individual body sections as well as broader colour coverage. The shade designation PS-44 keeps colour selection clear when matching an existing scheme or planning a new shell finish. In workshop use, the can fits projects that call for a transparent green effect on racing bodies, custom shells or replacement bodyshell parts. It also works well when a paint layout combines clear and coloured sections, so the finished model keeps visible depth in the body design instead of a fully opaque surface. Warning! Not suitable for children under 14 years.
PS spray colours
PS-46 Iridescent Green-Purple, Poly spray paint
300086046€14.691 l = €146.90
PS-46 Iridescent Green-Purple Poly spray paint brings a shifting finish to polycarbonate model surfaces, with a colour effect that moves between green and purple as light travels across the shape. The formula is intended for polycarbonate, making it suited to RC bodyshells, canopies and other formed clear parts where a spray-applied coat needs to follow curved contours evenly. The 100 ml aerosol format supports broad coverage on larger shells as well as controlled passes on smaller sections, and the spray application helps lay colour across recessed lines, arches and compound curves that are harder to reach with brush paint. Iridescent paint changes its appearance with angle and lighting, so the same shell can show different tones on the roof, sides and fenders during running or display. For a deeper result, the colour is recommended with PS-5 black behind the main coat, which strengthens contrast and gives the shifting finish more visual depth. This paint suits model work where the body shape itself becomes part of the effect, especially on polycarbonate racing shells, custom RC bodies and tinted detail sections. On the bench, it fits colour planning for multi-layer paint schemes; on a finished shell, it adds a changing surface tone that stands out as the model moves under indoor lighting or daylight. Warning! Not suitable for children under 14 years.
PS spray colours
PS-48 Alu Silver, polycarbonate spray paint
300086048€18.491 l = €184.90
PS-48 Alu Silver brings a bright metallic silver tone to polycarbonate body shell projects, giving RC car bodies a crisp finish that picks up molded vents, grille shapes, widened fenders and other formed details across the shell. The aerosol format applies the paint as a fine spray, which helps cover broad curved sections and recessed styling lines with a consistent coat during model finishing work. This paint is specified for polycarbonate, making it suited to clear body shells used in RC model building rather than general craft surfaces. The can contains 100 ml, a practical volume for complete shell painting or focused refinishing on a single body project. The Alu Silver shade is recommended with PS-5 black when painting with these colours, adding a darker backing layer behind the silver finish. That combination can strengthen contrast and give body contours, intake shapes and panel transitions a more defined look once the shell is mounted. On the bench, PS-48 fits naturally into body preparation and finishing sessions for touring cars, race cars and other polycarbonate RC shells. It works well when the goal is a metallic body colour that keeps the shell's sculpted lines visible, whether covering a full exterior design or building up a motorsport-inspired paint scheme. Warning! Not suitable for children under 14 years.
PS spray colours
PS-52 Champagne Gold, polycarbonate spray paint
300086052€18.491 l = €184.90
PS-52 Champagne Gold brings a metallic champagne tone to polycarbonate model bodies in a spray format built for hobby finishing. The aerosol can lays colour across broad shell sections quickly, which helps keep coverage consistent on curved body lines and larger clear moulded panels. This paint is specified for polycarbonate use and comes in a 100 ml can, making it a practical choice for single bodyshell work, partial repainting or detail correction on compatible shells. The cap shows the approximate shade for quick identification on the workbench. The source data also recommends pairing this colour with PS-5 black when a darker backing layer is wanted behind the finish. That guidance is especially useful when planning the order of coats on transparent RC bodies, where backing colour can affect the final visual result. On RC car bodyshells, polycarbonate paint is typically used where flexibility and shell-specific adhesion matter more than a general craft coating. PS-52 Champagne Gold fits neatly into that workflow for repainting a race shell, refreshing a used body or preparing a fresh clear bodyshell for track use and display. The can is intended for model finishing and should be used only on compatible polycarbonate surfaces. Warning! Not suitable for children under 14 years.
PS spray colours
PS-53 Lame Flake Transparent, spray paint, 100 ml
300086053€18.491 l = €184.90
PS-53 Lame Flake Transparent is a polycarbonate spray paint with a translucent flake finish that gives model bodyshells a layered, light-catching look. The aerosol can contains 100 ml, making it suited to coating larger formed sections where an even sprayed layer matters more than brush application. The paint is intended for polycarbonate surfaces, so it fits the finishing needs of RC car bodies and other clear formed parts used in model building. Its transparent character lets the underlying shell and backing colour influence the final appearance rather than covering the surface with a flat opaque coat. The flake effect adds visible texture in changing light, which can make curved roofs, arches and side panels read differently as the model moves or is viewed from different angles. The product data recommends PS-5 black when painting with this colour, a combination that can deepen the final tone and strengthen contrast behind the transparent layer. In a workshop setup, the 100 ml spray can suits full-shell colour work, accent sections or repainting a used bodyshell. On track-focused RC builds, the finish can give race bodies a more vivid look while still following the needs of polycarbonate painting rather than general craft use. Warning! Not suitable for children under 14 years.
PS spray colours
PS-9 Green, polycarbonate spray paint, 100 ml
300086009€10.991 l = €109.90
PS-9 Green brings a solid green finish to polycarbonate model bodies in a 100 ml spray can, with a format that suits broad curves, roof sections and flowing shell lines. The aerosol application supports smooth coverage across lightweight bodyshell shapes used in RC modelling. This paint is specified for polycarbonate, so it fits the material used for many RC car shells rather than general workshop painting. The can is used from the inside of the body, a method that places the colour layer behind the clear shell and leaves the outer surface free to show the body contours. Light coats help build the finish gradually across tighter corners and larger side panels. The spray format also suits masking work where separate colour areas need clean transitions. As part of the PS paint range, PS-9 Green gives model builders a dedicated option for body finishing when a strong single-colour scheme or a base for multi-colour graphics is planned. On the bench, the can suits fresh bodyshell projects, replacement shells and repaint work on compatible polycarbonate parts. It also fits custom RC builds where a clear shell needs a defined racing colour before decals and final detailing are added. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Grass Green, diorama paint, 100 ml
300087111€17.991 l = €179.90
Texture Clay Grass Green is a 100 ml diorama paint designed to give model scenery a grassy surface effect with added texture. Instead of laying down a flat coat, the formula helps build visible ground character on bases, terrain sections and miniature landscapes, so embankments, field edges and display groundwork read with more depth. The paint belongs to the Texture Paint range for terrain reproduction and is supplied in a screw-cap jar for workshop use between modelling sessions. Product data identifies it as a mixture with binders, pigments and solvents with additives, and the safety sheet lists full water solubility at 20 °C, a pH value of 8.5 ± 1.5 and a relative density of 1.1 ± 0.1. These details place it clearly in scenic finishing work where controlled spreading and surface build matter as much as colour. On a display base, Grass Green can define verges beside tracks, soften the edges of earth sections or break up larger painted areas with a more natural ground finish. It suits military dioramas, vehicle displays and landscape scenes where textured vegetation helps the setting support the model rather than sit beneath it as a plain painted board. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Pavement Light Grey, diorama paint
300087116€17.991 l = €179.90
Texture Clay Pavement Light Grey is a diorama texture paint designed to give scenic bases a paved light grey finish with visible surface character. The 100 ml jar suits model displays that call for concrete, apron or roadway styling, turning a plain base into a setting that supports the subject placed on it. As a texture paint for terrain reproduction, it combines colour and surface effect in one material rather than relying on a smooth coat alone. The light grey tone works especially well for airfield hardstands, runway-side sections, service areas and urban groundwork where a cleaner concrete look fits the scene. Used on a display base, the textured finish helps panel lines, section breaks and surrounding details read more naturally. The material is fully water-soluble according to the provided data, and the mixture is described with binders, pigments and solvents with additives. On an aircraft diorama, it can frame parked jets with a convincing paved setting instead of a bare stand. On vehicle or miniature scenes, it can define streets, courtyards or hard surface terrain that gives the model a clearer visual context. Stored tightly closed and protected from heat as stated in the data, the jar is ready for repeated use across multiple scenic projects. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Soil Dark Earth, diorama paint, 100 ml
300087109€17.991 l = €179.90
Texture Clay Soil Dark Earth is a 100 ml diorama paint designed to recreate dark soil on model bases and scenic layouts. The textured medium adds visible grain and body, so flat groundwork can be built up into earth surfaces that look more convincing around vehicles, figures and terrain features. The formula is described as a texture paint for terrain replication and combines binder, pigments, solvents and additives in one ready-to-use mixture. Its water solubility supports cleanup and handling within regular hobby workflows, while the dark earth shade suits churned ground, dusty paths and embankments. The material can be spread to cover open base areas or shaped into ridges and raised sections before drying. On military subjects, it suits lower hull areas, track runs and display plinths where a plain painted finish would miss the broken look of real soil. On a diorama base, the textured surface can frame a tank climbing a mound, define roadside edges or break up large flat sections with granular relief. In workshop use, the 100 ml jar gives a practical amount for single scenes, vehicle bases or a series of smaller terrain details across several model displays. Warning! Not suitable for children under 14 years.
TS spray colours
TS-101 Base White, paint spray, gloss undercoat
300085101€11.991 l = €119.90
TS-101 Base White is a 100 ml paint spray developed as a gloss white undercoat for model finishing work. When light colours need to go over dark surfaces, this dense white base helps prevent the darker substrate from shifting the final shade, so the topcoat reads cleaner and closer to its intended tone. The formula is described as a special acrylic resin spray paint, delivered in an aerosol can for direct application. Its role is not to replace the final colour, but to prepare the surface beneath it with a solid white layer that supports clearer colour development above. This makes it especially useful before applying lighter gloss shades, where dark material underneath can otherwise dull the result. The long description states that only minimal layers are needed to create this base, which helps keep the preparation stage focused on coverage rather than heavy buildup. On model parts in dark moulded colours, TS-101 can be used as the first paint stage before the chosen gloss topcoat follows. It fits painting sessions where body panels, accessories or other components need a bright, even foundation so the final finish appears more lustrous and visually consistent. Warning! Not suitable for children under 14 years.
TS spray colours
TS-12 Orange Gloss Spray Paint, Model Paint 100 ml
300085012€10.491 l = €104.90
TS-12 Orange Gloss is a 100 ml model paint spray designed for plastic parts, combining fast aerosol coverage with a bright gloss finish that gives larger surfaces a clean, uniform look. The special acrylic resin formula suits exterior model sections where brush marks can interrupt the final appearance, such as body panels, fairings and other shaped components. The aerosol format is especially useful when a build calls for broad, even colour across curved shells or multiple matching parts. Light passes help the colour build gradually, while the gloss finish brings extra visual depth to orange bodywork and trim. The can is labelled for plastics, making it a focused choice for model makers working on compatible plastic assemblies rather than general household painting. As part of the TS paint range, TS-12 offers a straightforward route to bold colour application on scale projects where consistency across visible outer surfaces matters. On the bench, it suits body finishing, colour changes and accent work on custom builds. In a model workshop setting, the 100 ml can size gives useful capacity for covering larger sections while keeping the application method simple and direct. Warning! Not suitable for children under 14 years.
TS spray colours
TS-22 Light Green Gloss, spray paint, 100 ml
300085022€10.491 l = €104.90
TS-22 Light Green Gloss brings a vivid light green tone and a glossy surface to model finishing in a 100 ml aerosol can. The spray format lays colour across broad areas quickly, making it useful for body panels, shells and other parts that benefit from an even coat and a clean, uniform sheen. This TS paint is identified in the data as a special acrylic resin spray and is presented for plastics, placing it squarely in model painting workflows rather than general household use. The can carries the TS-22 code on both cap and label, which helps keep colour planning clear when several shades are lined up on the bench. Aerosol delivery also reaches curves, edges and recessed shapes differently from brush application, which matters when a finish needs consistent coverage across shaped model parts. The 100 ml fill gives enough paint for more than a single small touch-up, so larger sections and batches of smaller components can be coated in the same colour run. On a build table, TS-22 Light Green Gloss fits naturally into body finishing, accent work and repaint jobs where a bright gloss green is the target shade. It can be used when refreshing a single panel, coating a full shell or bringing matching colour to separate parts that need the same surface character across the completed model. Warning! Not suitable for children under 14 years.
TS spray colours
TS-35 Park Green Gloss, spray paint, 100 ml
300085035€10.491 l = €104.90
TS-35 Park Green Gloss is a 100 ml spray paint for plastic model work, combining a solid green shade with a glossy finish that reads clearly on body panels, fairings and exterior parts. The aerosol format helps cover broad surfaces quickly, so larger shells and shaped sections can take on an even colour coat with fewer visible brush marks. This TS colour belongs to Tamiya's special acrylic resin spray range for plastics. The paint is supplied in a pressurised can and is identified as TS-35 Park Green Gloss, making it easy to match within an established hobby colour system when a build calls for a specific green tone. The gloss finish reflects light across curves, edges and raised details, which helps shaped surfaces show their lines after painting. On custom projects, the colour can be used for full-body coverage or for selected exterior sections that need a strong, clean contrast against other painted parts. Used on scale model shells and components, the spray format suits sessions where smooth passes across the surface matter as much as the final shade. The 100 ml fill offers a practical amount for regular bench use, whether the task is refreshing a single body panel, coating a full shell or adding a crisp green accent to a detailed build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-51 Racing Blue Spray Paint, model color, 100 ml
300085051€10.491 l = €104.90
TS-51 Racing Blue is a special acrylic resin spray for hobby and scale model work, supplied in a 100 ml aerosol can. The semi gloss shade gives plastic model parts a strong blue finish that reads clearly on bodywork, fairings and shaped panels, especially where an even coat matters across wider surfaces. The aerosol format is built for direct application, so color can be sprayed onto contours, recesses and curved sections without mixing or decanting first. On plastic parts, that makes it useful for shells, exterior panels and other components that benefit from a uniform painted layer. The BasicText names TS-51 specifically as Racing Blue semi Gloss, making it a defined color choice within the TS spray range rather than a generic blue. For a glossier final appearance, the stated pairing is TS-13 glossy clear coat, which can be applied as a separate clear layer over the painted surface. This spray suits model building sessions where a single color needs to cover larger visible areas with a consistent tone. It also fits custom projects that call for a motorsport-style blue on plastic assemblies, whether the goal is a full body color, accent sections or coordinated repaint work across matching parts. Warning! Not suitable for children under 14 years.
TS spray colours
TS-56 Brillant Orange Gloss, spray paint, 100 ml
300085056€10.491 l = €104.90
TS-56 Brillant Orange Gloss is a 100 ml aerosol paint for plastic models, bringing a vivid orange tone and a gloss surface to bodyshells, fairings and exterior parts. The spray format helps lay colour across broad panels and curved sections with a more uniform finish than hand brushing, which is especially useful when a build calls for a clean, uninterrupted coat. This TS paint belongs to the Tamiya Color spray range for plastics and is intended for model finishing rather than general household use. The can contains a special acrylic resin spray mixture with pigments and solvents in a pressurised aerosol format. The label identifies it as flammable, and the safety data states that use should be limited to well-ventilated areas. For modelers working on car shells, bike cowlings or other shaped components, the aerosol pattern helps reach contours, corners and recesses that can be slower to cover with a brush. TS-56 suits projects where a bright gloss orange is part of the livery, body colour or accent scheme. It can be used during the painting stage of scale builds, whether covering a full outer shell or adding a bold colour block to selected plastic parts. This paint is intended for adult modelers only. Warning! Not suitable for children under 14 years.
TS spray colours
TS-59 Pearl Light Red Gloss, spray paint, 100 ml
300085059€10.491 l = €104.90
TS-59 Pearl Light Red Gloss is a 100 ml spray paint for plastic model finishing, combining quick colour application with a glossy pearl effect that reads clearly across curved bodies and shaped parts. The aerosol format helps cover larger surfaces in smooth passes, making it well suited to body shells, fairings and other model sections where an even coat matters to the final look. This TS colour belongs to Tamiya's special acrylic resin spray range and is intended for hobby painting work rather than general household use. The Pearl Light Red shade brings a light red base with a lustrous finish that changes the character of a model more strongly than a flat coat. The can is labelled for adult modelers only, and the net content is 100 ml. As an aerosol, it is classified as extremely flammable and pressurised, so handling belongs in well ventilated working areas and away from heat or open flames. In practical use, this spray suits model projects that need fast, even coverage across larger plastic parts before detailing and final assembly. It also fits repainting sessions, custom colour layouts and refresh work on existing builds where a gloss pearl tone is part of the planned finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-69 Linoleum Deck Brown Flat, spray paint, 100 ml
300085069€12.291 l = €122.90
TS-69 Linoleum Deck Brown Flat is a 100 ml spray paint for model finishing, built around a synthetic lacquer formula that cures in a short period of time. The spray application suits broad surfaces where an even, uninterrupted colour layer matters, such as deck areas, body panels and other larger sections that benefit from full coverage. After the main coat is applied, enamel and acrylic paints can be used for added details, panel accents or picked-out sections because the spray layer is not affected by those paint types. That makes TS-69 useful for staged finishing work where the base colour goes on first and smaller features follow later with a brush. The flat Linoleum Deck Brown tone gives a muted, non-gloss appearance that fits scale subjects calling for a restrained surface finish rather than a reflective coat. A single can contains 100 ml of paint, with coverage stated for 2 or 3 1/24 scale car model bodies. This gives a practical reference point when planning a full repaint, a fresh body shell, or several matching sections in one session. Used in light coats across larger areas, the spray format supports clean, consistent results on model builds that need broad colour coverage and follow-up detail painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-72 Clear Blue Gloss, spray paint, 100 ml
300085072€10.491 l = €104.90
TS-72 Clear Blue Gloss brings a transparent blue tone and glossy finish to larger model surfaces in an aerosol format that is built for broad, even coverage. The synthetic lacquer formula cures in a short period of time, which helps keep painting work moving when body panels, shells or other wide sections need a uniform coat. This spray paint comes in a 100 ml can and is positioned for model finishing rather than brush application on small details. The lacquer layer is not affected by acrylic or enamel paints, so detail work can be added after the main color coat has been applied across the assembly. That sequence suits projects where window surrounds, trim lines or other fine accents are painted in separate stages. The stated coverage is enough to fully cover 2 or 3 car model bodies in 1/24 scale, giving a concrete guide for planning material use before a build reaches the paint bench. On a car bodyshell, the clear blue gloss can be used to establish the main visual effect first, then followed with enamel or acrylic touches once the larger areas are finished. It also fits hobby workflows that focus on smooth coverage across curved panels and other broad exterior sections where an aerosol coat is more efficient than hand painting. Warning! Not suitable for children under 14 years.
TS spray colours
TS-73 Clear Orange Gloss, paint spray, 100 ml
300085073€10.491 l = €104.90
TS-73 Clear Orange Gloss is a synthetic lacquer spray developed for model painting, with a 100 ml can size that suits broad body sections where an even coat matters. The aerosol format helps cover large surfaces quickly, and the short curing time keeps painting sessions moving when a shell, body panel or other exterior part needs a smooth gloss layer. The Clear Orange Gloss colour works especially well where a transparent orange effect is needed rather than a solid opaque coat. On model car bodies in 1/24 scale, one can provides enough paint to fully cover 2 or 3 bodies, which gives a useful reference when planning a full repaint or preparing several shells in the same finish. Because the TS formula is not affected by acrylic or enamel paints, detail colours can be added after the main sprayed coat has dried. That makes it easier to separate broad colour coverage from smaller painted accents and trim lines. On the workbench, the spray can format suits steady passes across curved panels, roofs and larger side sections. It also fits staged finishing, where the main colour is applied first and smaller details are picked out later with enamel or acrylic paints for a more defined final look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-82 Black Rubber Flat, paint spray, 100 ml
300085082€12.991 l = €129.90
TS-82 Black Rubber Flat is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and helps cover broad surfaces with an even coat. On car bodies, body panels and other larger parts, the aerosol format supports smooth application where brush painting can leave visible overlap on wide areas. The stated coverage gives a useful planning point: one can is enough to fully cover 2 or 3 car model bodies in 1/24 scale. That makes the spray suitable for a single detailed project with spare capacity or for several smaller finishing sessions across matching builds. The Black Rubber Flat tone suits parts that call for a restrained, non-gloss look rather than a reflective surface. After the main coat has dried, enamel and acrylic paints can be used to pick out smaller details, because the TS lacquer layer is not affected by those paint types. In practice, this supports a clear finishing sequence on scale models: broad areas first with the spray can, then finer accents added by hand on trim, edges or mechanical details. For builders working on car model bodies and similar large parts, TS-82 combines fast coverage, a flat black rubber tone and compatibility with follow-up detail painting in one focused finishing step. Warning! Not suitable for children under 14 years.
TS spray colours
TS-90 Brown JGSDF Spray Paint, Lacquer 100 ml
300085090€12.991 l = €129.90
TS-90 Brown JGSDF Spray Paint is a 100 ml lacquer aerosol created for Japanese ground vehicle finishes, bringing the JGSDF brown tone onto larger model surfaces with fast, even coverage. Released in conjunction with the Japanese Type 10 Tank, it gives builders a direct colour option for a realistic exterior finish on this modern main battle tank subject. Beyond the Type 10, TS-90 is also suitable for Type 61, Type 74 and Type 90 Japanese tank models, so the same can supports several armour builds within the same national scheme. The colour is also available in the acrylic paint range as XF-72 Brown JGSDF, which helps when a build combines sprayed base coats with brush-painted detail work in matching tones. As a lacquer spray, it is shaped for broad panels such as hull sides, turret tops and other exterior sections where an even coat matters to the final appearance. On the workbench, this paint suits builders preparing a full vehicle finish or refreshing a specific JGSDF subject already in the collection. It fits naturally into armour modelling sessions where accurate military colours, smooth surface coverage and consistent tone across multiple panels define the finished result. Warning! Not suitable for children under 14 years.
TS spray colours
TS-90 Dark Green JGSDF, spray paint, 100 ml
300085091€12.991 l = €129.90
TS-90 Dark Green JGSDF is a lacquer spray paint developed for military model finishing, with a 100 ml aerosol can that lays down broad colour coverage across larger surfaces. The dark green JGSDF shade is intended to help recreate the appearance of Japanese Ground Self Defense Force vehicles, especially when a model calls for a uniform, realistic coat over hull and turret panels. This colour was released in connection with the Japanese Type 10 Tank and is also suitable for Type 61, Type 74 and Type 90 tank models named in the data. The lacquer formula makes it useful where a smooth sprayed layer is needed across flat armour plates, edges and shaped body sections. In the wider paint range, the same military colour family is also available as acrylic references XF-72 Brown JGSDF and XF-73 Dark Green JGSDF, which helps when a build combines sprayed base coats with brush-painted detail work. The aerosol format suits modelers who want fast, even application on larger assemblies rather than building the finish through repeated brush coats. On the bench, the 100 ml can fits naturally into camouflage and finishing stages for modern Japanese armour subjects. Use is intended in well ventilated areas, with the aerosol handled carefully because the can is extremely flammable and under pressure. Warning! Not suitable for children under 14 years.
TS spray colours
TS-93 Pure Blue gloss, spray paint, 100 ml
300085093€11.491 l = €114.90
TS-93 Pure Blue gloss is a spray paint for plastic models that brings a strong blue finish to larger surfaces with the speed and reach of an aerosol can. The 100 ml format is sized for broad body sections, where an even coat matters across doors, roofs, bonnets or full shell exteriors. The paint is a synthetic lacquer that cures in a short period, helping colour work progress without long waits between stages. Tamiya states that one can covers 2 or 3 car bodies in 1/24 scale, which gives a useful guide when planning a single shell or several builds in the same colour. The formula is described as not being affected by acrylic or enamel paints, so detail colours can be added after the main blue coat has been laid down. That makes it easier to separate the main body colour from smaller painted elements instead of trying to complete every section with one paint type alone. On a workbench, TS-93 Pure Blue gloss suits full-body colour application on model car shells and other large exterior parts that benefit from spray coverage rather than brush painting. It also fits finishing sessions where the main colour is applied first and smaller accents are added later with other paint types for a more defined final look. Warning! Not suitable for children under 14 years.
TS spray colours
TS-97 Pearl Yellow gloss, paint spray, 100 ml
300085097€11.491 l = €114.90
TS-97 Pearl Yellow gloss is a 100 ml paint spray for model finishing, built around a synthetic lacquer formula that cures in a short time and lays down an even coat across large surfaces. On car bodies, broad bonnets, roofs and side panels can be covered in one continuous colour pass, giving the shell a bright gloss finish with a pearl effect. The spray format is especially suited to full-body painting where brush application would leave a less uniform result across wide panels. A single can is stated to cover 2 or 3 car model bodies in 1/24 scale, which gives a practical guide for planning a complete paint session. After the main colour has dried, smaller trim areas and picked-out details can still be worked in with acrylic or enamel paints. That compatibility supports layered finishing on grilles, window surrounds, mirrors or other accent areas without disturbing the base coat. On the bench, TS-97 suits builders preparing a fresh bodyshell or refinishing a display model that needs a vivid yellow tone with added pearl depth. It also fits multi-stage paintwork where the main body colour is sprayed first and the finer visual details are completed afterward with separate paint types. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Set F, pigment set with 3 metal tones
300087123€12.491 kg = €1,486.90
Weathering Set F brings 3 metal-effect pigments together in one compact case for finishing scale builds with more varied surface tone. Titanium, Light Gun Metal and Copper help recreate the look of different metals, while the included sponge applicator tool supports controlled placement on selected areas such as edges, recesses and panel lines. The set is suited to detail work on aircraft, where panel lines can be picked out with clearer contrast, and on motorcycles, where separate metal parts can be distinguished by tone rather than left in one uniform finish. Using the pigments over silver surfaces increases the visual effect, which helps metallic sections stand apart with more depth. The compact format keeps the shades close at hand during repeated passes, whether the goal is a light accent or a more layered finish. On a workbench, the 3 colors support quick comparison before committing to a final look on fairings, engine parts or fuselage sections. During finishing sessions, the sponge applicator makes it easy to return to small areas for extra emphasis, subtle blending or sharper definition around molded detail. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Set H Figures II, weathering set
300087127€12.491 kg = €1,486.90
Weathering Set H Figures II is a figure-focused weathering set created for human figure models, with 3 light pigment shades chosen to bring more depth to painted skin areas. Pale Orange, Ivory and Light Peach work together to lift raised facial contours, soften transitions and add tonal variation where a single paint layer can look flat under close viewing. The pigments are intended for easy depiction of gradation effects, making the set useful when refining cheeks, foreheads, noses, hands and other exposed areas on scale figures. The light palette is geared toward highlighting, so brighter zones can be built up in small steps while darker painted base tones remain visible underneath. This makes the set especially useful after the main paintwork is complete, when a figure needs more separation between lit areas and recessed detail. The compact case keeps the shades grouped in one place for repeatable finishing sessions at the workbench. On military figures, character busts or diorama subjects, the 3 tones can be applied selectively to create more natural-looking skin variation and clearer facial definition. The set also suits touch-up work on previously painted figures when a softer highlight or a lighter transition is needed on visible skin surfaces. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Stick Mud, model finishing stick
300087081€6.191 kg = €2,476.00
Weathering Stick Mud adds earthy wear marks to scale builds with a compact pen-style format that keeps finishing work direct and controlled. The mud shade suits scenes that call for road splash, dried grime or worked ground on body panels, lower sections and detail areas where a clean paint finish needs more realism. The solid mixture uses binders, pigments and additives, and the safety data identifies its intended use as depicting signs of use in model building. Its water-dispersible composition opens up different surface effects, from light staining along edges to denser deposits in corners and textured sections. The stick format also keeps handling focused on the exact area being treated, which helps when weathering smaller parts or adding localized marks instead of covering a whole surface. Stored cool and tightly closed, the material should be protected from heat above 50 °C. On military subjects, construction vehicles, rally cars or diorama groundwork, the mud colour helps break up uniform finishes with more convincing surface variation. It also fits late-stage detailing, when panel lines, lower bodywork or terrain sections need a final layer of used, lived-in character.
XY acrylic colours
X-15 Light Green Gloss, acrylic paint, 23 ml
300081015€5.491 l = €238.70
X-15 Light Green Gloss brings a bright light green shade to plastic model building with an acrylic paint formula and a glossy surface finish. The 23 ml jar suits careful brush work on body sections, trim details and other painted areas where a clean, even colour layer helps the finished model read clearly. The X-Acrylic formulation is identified in the product data as a special resin paint for plastic model building, with pigments, binders and solvents blended for hobby use. Its gloss character gives light green accents a reflective surface that works well for vivid markings, custom colour layouts or restoring painted sections on existing builds. The compact jar format keeps the paint easy to store alongside other workshop colours and simple to reopen for later correction work on matching parts. On the bench, this shade fits projects that need a fresh green highlight, a full painted panel or small visual contrast against darker tones. It also works well when several subassemblies need the same colour across separate painting sessions, keeping the finish consistent from first coat to final detail work.
XY acrylic colours
X-21 Flat Base, acrylic paint, 23 ml bottle
300081021€5.491 l = €238.70
X-21 Flat Base is an X-Acrylic paint for plastic model building, supplied in a 23 ml bottle for controlled use at the bench. The liquid format suits precise mixing and finishing work where a flatter paint surface is needed on detailed model sections. This formula belongs to the Tamiya X-Acrylic range and is identified as X-21 Flat Base in the product data. The safety documentation describes it as a liquid paint mixture with binders, pigments and solvents, and lists a density of 1.0 g/ml at 23 °C. The same document states a flash point of 31 to 33 °C and classifies the contents as flammable, so handling belongs in a well-ventilated workspace. For model makers planning a paint setup, the 23 ml volume is easy to portion for repeated mixing sessions instead of opening a larger container. On the workbench, X-21 Flat Base fits into finishing routines for body panels, cockpit parts, accessories and other painted model areas where surface appearance matters. The bottle size is easy to keep alongside brushes, palettes and mixing tools, and the dedicated flat-base format supports consistent preparation across multiple stages of a build. This paint is recommended for ages 14 years and up.
XY acrylic colours
X-33 Bronze Gloss, acrylic paint, 23 ml
300081033€6.291 l = €273.48
X-33 Bronze Gloss brings a metallic bronze tone and glossy finish to plastic model building, giving painted parts a brighter surface that catches edges, contours and raised detail. The 23 ml jar size suits repeated brush sessions on body accents, trim pieces and smaller assemblies where a controlled liquid paint is preferred. As part of the X-Acrylic line, this paint uses the X-33 shade reference for straightforward color matching across separate stages of a build. The safety data identifies it as a liquid paint with a density of 1 g/mL at 23°C and an alcohol odor, with a boiling range of 80 to 120°C and a flash point of 31 to 33°C. The mixture contains binders, pigments and solvents, and it is intended for plastic model building. Storage guidance in the data calls for a tightly closed container in a cool, well ventilated place away from heat and ignition sources. On the bench, the bronze gloss tone works well for picking out mechanical details, decorative trim and contrast sections that benefit from a metallic look rather than a flat color. Use belongs in well ventilated areas, with vapor and aerosol inhalation avoided and eye protection worn during handling.
XY acrylic colours
X-34 Metallic Brown Gloss, acrylic paint, 23 ml
300081034€6.291 l = €273.48
X-34 Metallic Brown Gloss is an acrylic resin paint for plastic model building that brings a metallic brown tone and glossy surface to fine-scale finishing. The 23 ml jar suits repeated detail work on panels, trim and smaller painted sections where a reflective color shift adds visual depth under light. The formula is identified as brush paint and combines binders, pigments and solvents in a liquid mixture with a density of 1 g/mL at 23°C. Its alcohol-based character and partial water solubility support thin, controlled application on model parts, while the metallic pigment helps pick out mechanical areas, interior accents and weathered surfaces with a warmer finish than silver or gunmetal shades. The documented boiling range of 80-120°C, flash point of 31-33°C and vapor pressure of 42.7 hPa at 20°C underline that this is a workshop material that should be handled with care. On the bench, the 23 ml volume works well for touch-ups, repeated trim passes and small-area color blocking across several builds. For storage between painting sessions, the container should be kept tightly closed in a cool, well-ventilated place, and application is intended for well-ventilated work areas.
XY acrylic colours
XF-12 Flat Japanese Navy Grey, acrylic paint
300081712€3.591 l = €359.00
XF-12 Flat Japanese Navy Grey brings a restrained military colour tone to model finishing in a compact 10 ml jar. The flat finish keeps reflections low, which suits naval subjects and other builds where a subdued painted surface supports a more authentic look on panels, structures and small fitted parts. The acrylic paint format lends itself to controlled application on edges, recessed details and smaller sections that benefit from measured brushwork. The shade name identifies this colour specifically as Japanese Navy Grey, making it easier to match planned paint schemes and keep repeat work consistent across separate sessions. The 10 ml content is well suited to detail painting, touch-ups and selective repainting where a full-size container would be unnecessary. The jar format also stores efficiently alongside other coded colours in a workshop or hobby shelf. On ship models, aircraft details, equipment sections or other scale projects, XF-12 can be used where a flat grey tone is needed for surface definition and visual balance. The clearly marked colour code helps with quick selection during build planning, correction work and later finishing stages.
XY acrylic colours
XF-13 Flat Japanese Army Green, acrylic paint
300081313€5.491 l = €238.70
XF-13 Flat Japanese Army Green brings a dedicated military shade to model finishing, with a 23 ml jar size that fits neatly into regular bench use for detail work, touch-ups and small-area coverage. The acrylic paint format suits controlled brush application, while the flat surface effect keeps the colour muted rather than reflective on finished parts. This shade is named Japanese Army Green, giving historical vehicle builds and military scenes a clearly defined colour reference straight from the jar. The 23 ml volume is easy to handle during repeated painting sessions and stores compactly alongside other colours in the XF range. The acrylic medium supports layering across smaller components where crisp edges and steady coverage matter. On cockpit sections, stowage parts, field equipment or scenic elements, the flat finish helps avoid the shine that can distract from scale detail. At the workbench, this paint fits naturally into projects that need a dark military green for selective areas, corrections or complete colour sections. It also works well when a build calls for a consistent army tone across multiple matching parts, keeping the finish visually uniform from one section to the next.
XY acrylic colours
XF-13 Flat Japanese Army Green, acrylic paint
300081713€3.591 l = €359.00
XF-13 Flat Japanese Army Green is an acrylic paint shade for model finishing, supplied in a 10 ml jar that sits neatly on the workbench and keeps small paint quantities easy to manage during careful colour application. The flat finish gives military subjects a subdued surface appearance that avoids shine and suits equipment, body panels and field accessories. This shade is identified as XF-13 within the XF acrylic paint range, which helps when matching colours across a build or returning later for touch-up work on the same scheme. The 10 ml content supports controlled use on smaller parts, edge work and selective repainting where a full-size paint container would be excessive. The dark green tone shown in the designation aligns with Japanese Army Green, making it a direct reference colour rather than a generic green. As an acrylic paint, it is suited to precise hobby finishing where measured application matters. On the bench, the jar format is easy to place beside palettes, brushes and in-progress assemblies while painting tools, armour details or exterior sections in stages. It also works well for keeping a dedicated military shade ready for repeat sessions, whether the task is base coating a component or refining a finished model's colour balance.
XY acrylic colours
XF-18 Flat Medium Blue, acrylic paint, 10 ml
300081718€3.591 l = €359.00
XF-18 Flat Medium Blue is an acrylic paint for model finishing, supplied in a 10 ml jar that fits neatly into compact hobby storage and keeps a frequently used shade close at hand during painting sessions. The flat finish gives the colour a subdued surface look, which suits builds that call for a non-reflective blue rather than a glossy coat. The shade name identifies a medium blue tone within the XF acrylic range, making it a practical choice when a build needs a distinct blue area with a matte appearance. The 10 ml content works well for detail painting, selective colour blocking and small corrections after assembly. On parts with moulded lines, recesses or raised sections, a brush can place colour exactly where it is needed and keep neighbouring areas clean. This makes the paint useful for trim sections, equipment details and other defined zones where control matters more than broad coverage. On the workbench, XF-18 suits focused painting steps such as picking out individual components, refreshing worn colour areas or adding contrast to a finished model. The compact jar size also makes it easy to keep several shades in rotation for builds that rely on precise, section-by-section colour work.
XY acrylic colours
XF-18 Flat Medium Blue, acrylic paint, 23 ml
300081318€5.491 l = €238.70
XF-18 Flat Medium Blue is an acrylic paint for scale modelling work, supplied in a 23 ml jar for controlled colour use on smaller parts, surface sections and detail areas. The flat finish gives painted sections a muted look rather than a reflective sheen, which helps when a build calls for a more restrained surface character. This shade is identified as XF-18 Flat Medium Blue, making it easy to place within an existing paint rack or a planned colour sequence for a build. The acrylic formula suits careful brush application on accessories, trim pieces and selected body details where measured coverage matters more than high paint volume. The 23 ml content also gives a clear reference for planning repeat work across multiple sessions, whether the same colour is needed for matched components or for follow-up corrections after assembly and handling. Hazard pictograms shown on the label indicate that the contents require careful handling and storage as marked. On the workbench, this paint fits naturally into focused finishing tasks such as colouring equipment parts, refining small moulded details or adding a flat blue accent to a larger model. It also works well as a dedicated workshop shade kept on hand for later touch-ups when a build returns for further detailing.
XY acrylic colours
XF-21 Flat Sky, acrylic paint, 10 ml jar
300081721€3.591 l = €359.00
XF-21 Flat Sky is an acrylic paint for scale modelling work, supplied in a 10 ml jar for compact storage and measured use at the workbench. The Flat Sky tone brings a subdued matte finish to painted sections, making it suitable for projects that call for a restrained colour rather than a glossy surface. The acrylic formula fits common modelling tasks such as detail painting, small corrections and colour application on selected sections of a build. A 10 ml size keeps the jar easy to place alongside other bench supplies and helps separate dedicated shades within a broader paint range. The XF designation identifies this specific colour within the series, which helps when returning to the same finish for later matching work. The jar format also supports controlled access to the paint during brush-based application. On aircraft, vehicle or display builds, XF-21 Flat Sky can be used where a matte painted area needs a consistent tone across smaller parts and surface details. It also suits touch-up work during longer projects, when the same shade needs to be revisited without mixing a new colour each time.
XY acrylic colours
XF-25 Flat Light Sea Grey, acrylic paint
300081325€5.491 l = €238.70
XF-25 Flat Light Sea Grey brings a subdued matte tone to scale finishing, with a 23 ml jar size that suits careful brush application, detail painting and small-area colour work on model projects. The acrylic paint format supports measured handling at the bench, where controlled coverage and clean colour placement matter as much as the shade itself. The Flat Light Sea Grey colour sits well within military, naval and aircraft palettes, where restrained surface tones help markings, panel lines and neighbouring colours stand apart. The XF designation identifies this paint within Tamiya's acrylic range, making it easy to match with other workshop colours already organised by series. The 23 ml content gives enough paint for repeated touch-ups, trim sections and selected body areas while keeping the jar compact in storage. The screw-top container also helps keep unused paint sealed between sessions. On the workbench, this shade fits projects that call for muted grey sections, weathered-looking surfaces or precise colour blocking across smaller parts. It also suits repaint work where a single section needs correction without reopening a larger finishing setup.
XY acrylic colours
XF-25 Flat Light Sea Grey, acrylic paint, 10 ml
300081725€3.591 l = €359.00
XF-25 Flat Light Sea Grey brings a muted flat finish to scale painting work in a compact 10 ml format that suits careful bench use and controlled colour placement. The acrylic paint format supports measured application on smaller model sections where a clean, even coat matters. The Flat Light Sea Grey shade fits naturally into technical, military and transport colour palettes, especially where a low-sheen surface is needed instead of a glossy effect. On cockpits, body sections, equipment parts or structural details, the colour can define panels and break up larger painted areas with a restrained grey tone. The 10 ml jar size keeps the paint easy to store alongside other modelling colours and simple to bring into focused touch-up work when a single section needs correction or refinement. As an acrylic paint, it also suits steady brush control on edges, corners and recessed details where precise placement matters more than broad coverage. On a model building bench, XF-25 works well as a dedicated shade for detail passes, small assemblies and colour matching across separate parts. It also earns its place in a paint rack as a reliable grey option for repeat finishing work on scale subjects that call for a flat light sea grey tone.
XY acrylic colours
XF-26 Flat Deep Green, acrylic paint, 10 ml
300081726€3.591 l = €359.00
XF-26 Flat Deep Green is an acrylic paint for scale modelling work, supplied in a 10 ml jar and suited to controlled colour application on smaller sections. The flat finish gives painted surfaces a subdued look, making this shade useful where a non-gloss deep green is needed on body parts, accessories or scenic elements. The XF designation identifies this specific colour within the range, helping keep shade selection consistent across ongoing projects and later touch-ups. The compact jar format fits neatly into a modelling workspace and supports measured paint use instead of opening a larger container for a small task. Flat Deep Green can be used where a build calls for a darker green tone with reduced surface reflection, which helps preserve painted detail in panel lines, edges and textured areas. The 10 ml content also makes this jar a practical addition when a single colour is needed to complete a specific section. On the bench, this paint suits careful finishing passes, detail correction and colour matching across separate assemblies. It also works well as a dedicated shade kept alongside other modelling colours for repeat use on future builds that call for the same deep green tone.
XY acrylic colours
XF-28 Dark Copper Flat, acrylic paint, 23 ml
300081328€7.291 l = €316.96
XF-28 Dark Copper Flat brings a muted copper tone to model painting in a 23 ml acrylic paint jar, suited to brush-applied colour work where metallic detail needs a flatter, more controlled finish. The shade reads as dark copper rather than bright gold, which helps mechanical parts, trim sections and weathered surfaces sit more naturally within a scale build. The supplied data identifies this paint as a liquid acrylic coating with copper colour, alcohol odour and a density of about 1.2 g/ml at 23°C. Its flash point is 33°C, and the safety classification states flammable liquid and vapour, severe eye damage, harmful if inhaled, and possible drowsiness or dizziness. For that reason, use belongs in well-ventilated spaces with suitable eye protection and gloves as stated in the safety information. The jar format supports measured dispensing for touch-up work, painted accents and controlled coverage on smaller sections. On the bench, this shade fits areas such as engine parts, fittings, armour details or aged metal effects where a bright metallic tone would look too clean. It also works when a build needs contrast between glossy body colours and a flatter metallic section, helping painted details stand apart through finish as well as colour.
XY acrylic colours
XF-68 Flat NATO Brown, acrylic paint, 10 ml
300081768€3.591 l = €359.00
XF-68 Flat NATO Brown is an acrylic hobby paint in a 10 ml jar, set up for controlled colour application on scale models and finishing work. The flat brown tone suits military subjects, equipment details and weathered surfaces where a low-sheen result matches the look of service use. The XF designation gives the shade a fixed reference within the range, which helps when a build needs the same colour again for later stages, corrections or matching separate parts. Acrylic paint works well for careful brush application on smaller sections, trim areas and surface accents where colour placement needs to stay exact. The 10 ml size keeps the jar easy to store on a workbench and practical to keep alongside other coded shades in a modelling setup. On the bench, XF-68 Flat NATO Brown fits naturally into camouflage layouts, detail painting and touch-up work after assembly. It also serves well when separate components need a consistent brown finish before final display or further weathering steps.
XY acrylic colours
XF-70 Flat Dark Green, acrylic paint, 10 ml
300081770€3.591 l = €359.00
XF-70 Flat Dark Green brings a muted military-style shade to model finishing in a compact 10 ml acrylic paint jar. The flat finish reduces shine on painted surfaces, which helps body panels, accessories and field equipment read with a more scale-appropriate look under display lighting or in photographed scenes. As an acrylic paint, XF-70 suits controlled brushwork on smaller sections where clean edges and measured colour placement matter. The dark green tone works well for camouflage areas, equipment parts and touch-up jobs that need a subdued surface rather than a reflective one. The 10 ml volume is easy to keep within a paint rack or tool drawer, and the dedicated shade number supports consistent colour matching when a build returns to the bench for later detailing. On military vehicles, diorama accessories or selected trim sections, this colour can be applied where a darker field tone is needed to break up larger painted areas. It also fits repair work on previously finished models, where keeping the same XF-70 shade on hand helps maintain a uniform result across separate painting sessions.
XY acrylic colours
XF-71 Cockpit Green, acrylic paint, 10 ml
300081771€3.591 l = €359.00
XF-71 Cockpit Green is an acrylic paint for model finishing, supplied in a 10 ml jar and suited to small, controlled paint sessions on interior sections. The dedicated Cockpit Green shade fits aircraft builds where cockpit areas, side panels or seat surrounds need a distinct colour treatment that separates the interior from the outer airframe. The compact 10 ml format is easy to keep alongside other finishing supplies on the workbench and supports measured paint use on detail-focused tasks. Acrylic paint is well suited to careful brushwork on smaller parts where edges, recesses and raised moulded detail need a clean colour pass. Used on instrument surrounds, seating areas or interior wall sections, XF-71 helps bring structure to spaces that can otherwise disappear once the model is assembled. The named XF-71 code also makes the shade easy to identify within a paint collection when a specific interior colour is needed again. During a build, the paint can be applied as cockpit subassemblies are prepared before final installation, or used later for touch-ups after handling and fitting. The label carries flammable and warning hazard pictograms, so the jar belongs with other workshop materials that require careful handling and storage.
XY acrylic colours
XF-73 Flat Dark Green, acrylic paint, 10 ml
300081773€3.591 l = €359.00
XF-73 Flat Dark Green brings a muted military shade into model finishing with a compact 10 ml format that suits careful, controlled paint work. The color designation JGSDF points to a specific dark green tone, making it useful where a defined reference shade matters on scale subjects and equipment details. As part of the XF acrylic paint range, this paint is suited to precise application on smaller sections that need clean edges and even coverage. The flat finish helps avoid unwanted shine on surfaces that call for a subdued appearance, especially on panels, accessories and touch-up areas. The 10 ml jar size also fits neatly into focused bench setups where several colors are used side by side for camouflage, markings and layered finishing steps. When a build calls for one exact green rather than a broad general tone, XF-73 keeps that choice clear and easy to identify. On the workbench, this shade can be used for selective repainting, detail correction or adding depth across military-themed builds and display pieces. It also works well as a dedicated color kept ready for repeat use across matching projects that share the same finish family.
XY acrylic colours
XF-74 Flat Olive Drab, acrylic paint, 10 ml
300081774€3.591 l = €359.00
XF-74 Flat Olive Drab is a 10 ml acrylic paint for scale model finishing, offering a muted military colour that suits careful detail work and controlled coverage on smaller painted areas. The Flat Olive Drab JGSDF tone gives surfaces a subdued, non-gloss appearance that fits equipment, vehicle and accessory sections where a flatter finish is required. The acrylic formula supports precise application during painting sessions that call for measured colour placement rather than broad coverage. A 10 ml jar is easy to keep within reach on the workbench and practical when a build needs a dedicated shade for trim sections, touch-ups or matched repainting. The colour designation XF-74 also helps keep paint planning clear when several tones are being prepared for one scheme. On a model bench, this paint fits naturally into finishing stages such as refining panel sections, adjusting colour transitions or restoring small worn spots after handling. It also works well when a project calls for a consistent olive drab tone across separate components that are painted in different sessions.
XY acrylic colours
XF-77 Flat IJN Gray, acrylic paint, 10 ml
300081777€3.591 l = €359.00
XF-77 Flat IJN Gray brings a dedicated Imperial Japanese Navy shade into model finishing with a flat surface effect that suits military subjects requiring a muted, even appearance. The 10 ml jar format keeps this acrylic paint easy to store, open and return to during careful bench work on ships, aircraft and other scale builds. The colour designation points to the Sasebo Arsenal tone, giving builders a specific reference for historically informed paint schemes rather than a generic grey. As an acrylic paint, XF-77 suits controlled application on smaller sections where clean edges and measured coverage matter. The flat finish helps avoid unwanted shine on areas intended to read as service paint rather than polished metal. The compact volume also makes it practical to keep alongside other coded shades in a paint rack without taking much space. On the workbench, this paint fits naturally into detail stages such as subassemblies, panel sections, fittings and later corrections after test fitting. It also works well when a project calls for a dedicated naval grey that can be reopened across multiple sessions while keeping the same colour reference close at hand.
XY acrylic colours
XF-93 Light Brown DAK 1942, acrylic paint
300081793€3.791 l = €379.00
XF-93 Light Brown DAK 1942 is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to a specific historical colour reference. The flat surface appearance keeps painted areas free from gloss, which suits military subjects, field equipment and scenery sections that call for a dry, subdued tone. The shade designation DAK 1942 points to a defined colour choice rather than a general brown, which helps when a build calls for consistent finishing across separate parts. Small details such as tools, stowage, panels and textured surfaces benefit from a paint size that is easy to handle in short sessions and simple to store with other modelling colours. The acrylic formulation makes this jar a practical addition to a paint range built around controlled application and layered finishing work. The product image also shows GHS hazard pictograms for flammable contents and warning handling. On the workbench, this colour fits projects where dusty earth tones, faded equipment finishes or restrained camouflage accents are needed. It also suits touch-up work on earlier builds, where a compact 10 ml jar keeps a specific shade ready for repeat use without taking much space.
Airbrush accessories
1.5m Air Hose for Revo II, model accessory
300074547€10.99
This 1.5 m air hose for Revo II is a dedicated model accessory built for clean, flexible line routing between compatible threaded connections. The transparent tube keeps the full run visible, while the silver-colored screw couplings at both ends create a direct mechanical connection that matches the technical character of the part. The hose uses clear flexible tubing with black fittings where the line meets each connector, making the transition points easy to identify during installation or replacement. The knurled metal ends support hand tightening and loosening, which helps when the hose is removed for servicing or fitted as a fresh line on Revo II equipment. Its coiled form stores compactly between uses, and the visible tube interior makes it easier to check the line condition during maintenance. In practical use, the hose suits workshop tasks such as replacing a worn line, restoring an existing setup, or keeping a matching spare ready for later service. On a bench or in a hobby room, the 1.5 m length gives enough reach for tidy routing without turning the connection into a rigid fixed run.
Diorama texture colours
250 ml Diorama Texture Paint, Grit Light Sand
300087122€25.991 l = €103.96
Diorama Texture Paint Grit Light Sand gives terrain work a dry, sandy character with a water-based formula and a visible grit effect. Colored ceramic particles in the paint create surface texture directly on bases and scenery sections, so flat groundwork can take on the look of loose sand, worn paths, or desert soil. The 250 ml bottle contains enough material to cover a B4-sized area in 2.5 coats, which helps when a scene needs consistent texture across a wider footprint. The Light Sand shade draws its inspiration from the deserts of Iraq and Afghanistan, making it a strong match for arid settings, roadside dust, exposed ground, and pale earth transitions around structures or vehicles. Because the paint is water-based, it fits neatly into diorama workflows that combine texture, color, and later finishing steps on the same base. After an application time, the surface dries in 4 to 5 hours, giving a clear window for planning the next stage of weathering or scene assembly. It can be used to shape groundwork on display bases, military scenes, model landscapes, or miniature terrain sections where a rough sand finish helps tie vehicles, figures, and structures into the setting. Warning! Not suitable for children under 14 years.
Airbrush accessories
Air Control Valve II, airbrush accessory, PF1/8
300074560€21.49
Air Control Valve II adds direct air adjustment to an airbrush setup by fitting inline between the airbrush and the hose. The metal body combines threaded ends with a knurled center section, so pressure changes can be made at the tool while paint is going down across camouflage edges, narrow corners and recessed surfaces. The valve uses a central screw to regulate airflow, with open and close rotation controlling the amount of air passing through the line. Adjustment runs from zero to maximum output, giving a wider working range for different paint application needs. Internal regulation changes the airflow inside the valve itself, which keeps operation smooth and quiet during use. PF1/8 Type-S joints are used on both ends, so the connection standard is clearly defined for matching equipment. The airbrush and hose are not included. On the bench, this format helps when a spray pattern needs quick correction between broader coverage and tighter detail without interrupting the painting sequence. It also suits work on hard-to-reach nooks and crevasses where small pressure changes can help keep control close to the surface. Not compatible with Spray Work Basic Air Compressor products. Warning! Not suitable for children under 14 years.
AS spray colours
AS-10 Flat Ocean Grey, paint spray, 100 ml
300086510€12.291 l = €122.90
AS-10 Flat Ocean Grey brings a muted RAF colour tone to scale model finishing in a 100 ml spray can that suits broad, even coverage across larger exterior sections. The flat finish keeps reflections low, so panel lines, contours and surface shaping remain visually clear once the colour is applied. The spray format is useful where a brush would leave a more broken surface across wings, fuselages, hulls or body sections. A 100 ml fill gives a practical amount for repeated passes on multiple parts within the same scheme. The designation AS-10 makes this shade easy to identify within a paint collection when a specific military grey is needed for matching or touch-up work. The can is marked with hazard pictograms for flammable, irritant and corrosive properties, so handling belongs in a controlled model-making setup with appropriate storage and care. On the bench, this paint suits builders working through aircraft camouflage, vehicle refinishing or other projects that call for a restrained grey with a flat look. It also fits organised workshop use, where clearly labelled colour cans help keep finishing steps consistent across separate assemblies and later detail work.
AS spray colours
AS-11 Flat Medium Sea Grey, spray paint, 100 ml
300086511€12.291 l = €122.90
AS-11 Flat Medium Sea Grey brings a classic RAF-inspired matt grey tone to model finishing in a 100 ml aerosol can. The spray format lays colour across broad panels, curved sections and recessed areas with a more even coat than brush application can usually achieve on larger surfaces. This paint is identified as spray paint for colour work on polycarbonate bodies, making it a practical choice when a uniform grey finish is needed on model shells and similar parts. The matt character keeps reflections low, which helps the colour read with the subdued look associated with military schemes. The can contains 100 ml, giving enough material for repeated passes across larger sections rather than only detail touch-ups. In the safety data, the contents are classified as an aerosol and the colour is stated as grey. On a workbench, AS-11 suits repainting a body shell, covering a single panel tone, or matching an RAF-style scheme across a full model surface. Use belongs in well ventilated areas, with the pressurised aerosol kept away from heat and open flames during spraying and drying. Warning! Not suitable for children under 14 years.
AS spray colours
AS-12 Flat Bare Metal Silver, paint spray, 100 ml
300086512€12.291 l = €122.90
AS-12 Flat Bare Metal Silver is a 100 ml paint spray for model finishing, combining a flat metallic tone with the speed of aerosol application. The colour gives parts a bare metal silver appearance without a glossy sheen, which suits builds that call for a restrained technical look on larger sections. The spray format helps cover broad panels, shells and shaped components in a continuous coat, especially where brush painting can leave visible strokes along edges and recesses. The flat finish changes how light sits on the painted surface, keeping reflections softer and letting panel shapes, moulded lines and structural details stay readable. Within a model workshop setup, this makes AS-12 useful for projects that need a silver tone with a more subdued character than bright chrome-style colours. It fits naturally into painting stages for scale vehicles, mechanical subjects and other hobby builds where separate parts are prepared, coated and left to cure before final assembly. Used on body sections, covers or exterior details, the 100 ml can supports repeated passes across multiple components while keeping the colour consistent through the same project. Warning! Not suitable for children under 14 years.
AS spray colours
AS-13 Flat Green (USAF), spray paint, 100 ml
300086513€12.291 l = €122.90
AS-13 Flat Green (USAF) is a 100 ml spray paint for scale model finishing, combining a military aircraft colour reference with the speed and reach of aerosol application. The flat finish suits subjects that call for a muted surface rather than a reflective sheen, and the spray format helps lay colour across larger sections with a consistent visual result. The USAF shade designation gives the colour a clear modelling context for aircraft builds and related military schemes. Broad areas such as wings, fuselage panels or exterior shell sections can be coated more quickly than with brush painting, which is especially useful when an even colour field matters to the final appearance. The 100 ml can size also makes the paint easy to place alongside other finishing supplies on the workbench without taking much room. As part of the AS paint spray line, this colour fits naturally into projects that rely on named reference shades instead of mixed custom tones. On the bench, AS-13 Flat Green (USAF) suits fresh builds, repaints and touch-up work on compatible model surfaces. It also works well when a project needs a uniform base colour before further weathering, masking or detail painting steps are added. Warning! Not suitable for children under 14 years.
AS spray colours
AS-15 Flat Tan USAF, aircraft spray paint, 100 ml
300086515€12.291 l = €122.90
AS-15 Flat Tan USAF is a 100 ml spray paint for aircraft models, built for broad, even colour application with the speed and reach of an aerosol can. The flat tan shade suits military aviation subjects where a muted surface finish supports the look of service paint rather than a glossy display coat. The can is part of the AS paint range for aircraft work, making it a focused choice for model builders finishing fuselage sections, wings and other larger parts. Pressurised delivery lays colour down in a fine mist, which helps cover shaped surfaces more quickly than hand brushing on wide panels. The flat finish also provides a subdued base for further detailing, weathering or decal work where a low-sheen surface fits the subject. With 100 ml in the can, there is useful capacity for complete exterior colour passes on many scale aircraft builds. On the bench, AS-15 Flat Tan USAF fits naturally into painting sessions that move from primed parts to final exterior colour. It suits builders working on military aircraft schemes who want a dedicated spray shade for broad coverage, consistent tone and a clean, uniform finish across the model. Warning! Not suitable for children under 14 years.
AS spray colours
AS-17 Flat Dark Green, spray paint, 100 ml
300086517€12.291 l = €122.90
AS-17 Flat Dark Green brings an even spray pattern and a military-style flat finish to aircraft model painting, with a 100 ml aerosol can that suits broad surface coverage on wings, fuselage panels and tail sections. The pressurised format applies paint through the nozzle as a fine mist, which helps lay down colour across larger areas more quickly than brush application. The can is labelled Tamiya Color For Aircraft, placing it within a paint range developed for aircraft model finishing rather than general craft use. The Flat Dark Green shade is identified as IJA, giving builders a specific reference within military aircraft colour work. The dark green cap provides a direct visual cue for the colour inside, while the AS-17 code helps keep paint racks and bench storage organised during longer build and finishing sessions. As an aerosol paint, it is supplied in a sealed metal can with 100 ml net volume. This spray paint fits the stage where assembled parts are ready for surface colour, whether covering a full airframe, refining camouflage sections or revisiting selected panels after masking. On the bench, the can format supports steady passes across larger model surfaces and helps maintain a uniform look across separate components painted in the same shade. Warning! Not suitable for children under 14 years.
AS spray colours
AS-25 Flat Dark Ghost Grey, spray paint, 100 ml
300086525€12.291 l = €122.90
AS-25 Flat Dark Ghost Grey brings a flat aircraft colour into a 100 ml spray can, giving model finishing work a fast way to cover larger exterior sections with a consistent grey tone. The aerosol format suits broad passes across fuselage panels and wing surfaces where an even visual finish matters. The Tamiya Color For Aircraft line is presented specifically for aircraft models, making this shade a focused choice for aviation subjects rather than a generic craft paint. The flat finish keeps reflections low, which helps preserve the restrained look often associated with military and service aircraft schemes. The spray nozzle and pressurised can are built around direct application, so colour is laid down by sweeping passes instead of brush strokes. That handling method can reduce visible streaking on larger panels and helps keep the surface appearance uniform across connected sections. The can is labelled with a net volume of 100 ml, giving a clear reference for workshop planning and repeat use across multiple painting sessions. On the bench, AS-25 fits into priming and colour-coat workflows for aircraft builds, especially when wings, tailplanes or fuselage halves need the same tone across wide areas. It also suits touch-up or repaint work on previously assembled display models where a flat grey finish is required.
AS spray colours
AS-3 Flat Grey Green, paint spray, 100 ml
300086503€12.291 l = €122.90
AS-3 Flat Grey Green is a 100 ml paint spray for model finishing, supplied in a ready-to-use aerosol format that lays colour down quickly across broad surfaces. The Flat Grey Green tone is identified in the data as Luftwaffe, giving aircraft projects a specific military shade rather than a generic green and helping keep the visual character of the scheme consistent from panel to panel. The spray format suits work on larger sections such as wings, fuselage parts and other shaped components where an even coat matters. A matt colour like AS-3 Flat Grey Green can support the look of scale aircraft subjects by reducing shine and keeping surface detail visually clear once the coat is applied. Within the AS range, this can is positioned as a dedicated finishing colour rather than a mixed set, so the full 100 ml content is focused on one shade for repeat use across matching builds or touch-up work on the same scheme. On the bench, the aerosol format keeps application direct and compact, whether covering a main airframe colour or refining separate sections before final assembly. It also fits neatly into paint planning for military aviation subjects where a named shade helps align different parts of the build under one consistent finish.
AS spray colours
AS-30 Flat Dark Green 2, aircraft spray paint
300086530€12.991 l = €129.90
AS-30 Flat Dark Green 2 brings an RAF-focused aircraft colour into a ready-to-spray 100 ml aerosol can, giving model builders a direct way to cover fuselage panels, wings and other exterior sections with a flat finish. The spray format helps paint reach curved shapes and recessed areas that are slower to cover with a brush alone. The can is part of the Tamiya Color for Aircraft range and is presented specifically for aircraft model finishing rather than general craft use. Its pressurised nozzle releases the paint as an aerosol, which supports broad, even passes across larger surfaces and steady colour application on panelled airframes. The Flat Dark Green 2 shade suits camouflage work, repainting individual sections and refining colour separation on military aircraft subjects where a muted green tone is required. The 100 ml volume also gives practical capacity for more than a single small touch-up task. On the workbench, AS-30 fits naturally into priming and finishing routines for scale aircraft builds, whether the goal is a full exterior coat or targeted repainting of selected areas. The can works best where smooth coverage, consistent tone and efficient application matter across shaped model parts.
AS spray colours
AS-31 Flat Ocean Grey 2, spray paint, 100 ml
300086531€12.991 l = €129.90
AS-31 Flat Ocean Grey 2 brings a dedicated aircraft colour into a 100 ml aerosol format that lays paint down by spray rather than brush, helping model surfaces take on an even matt finish across wings, fuselage sections and other larger areas. The Flat Ocean Grey 2 (RAF) shade suits military aircraft schemes where a muted surface tone matters as much as the colour itself. The can is part of the AS paint range for aircraft models and is designed for spray application through a pressurised nozzle. Light passes help build coverage gradually on prepared parts, which is useful around panel lines, curved sections and broad exterior surfaces that can show brush marks more easily. The visible can marking identifies it as Tamiya Color for Aircraft, and the 100 ml fill gives practical volume for repeated finishing work across a build. Model materials named in the product data include metal and glass. On the bench, the spray format fits base coating before detail work, repainting selected sections, or matching separate assemblies before final display. The flat grey-blue tone works especially well where a restrained RAF-style surface is needed and where a gloss effect would look out of place on the finished aircraft.
AS spray colours
AS-32 Flat Medium Sea Grey 2, aircraft spray paint
300086532€12.991 l = €129.90
AS-32 Flat Medium Sea Grey 2 brings an aircraft-focused colour into model finishing with a flat RAF shade and a pressurised aerosol format. The spray can applies paint as a fine mist, which helps cover wings, fuselage panels and other broad sections with a more uniform surface than hand brushing alone. The 100 ml content gives useful capacity for repeated passes across larger assemblies and for keeping colour continuity between separate parts. The flat finish suits military aircraft subjects where a low-sheen surface is part of the visual effect. The nozzle format supports quick, controlled application on primed model surfaces, while the can design keeps the paint ready for direct spray use rather than decanting before each session. As an AS series colour for aircraft, this shade fits naturally into camouflage layouts, panel work and repainting tasks where a specific grey reference matters. On the bench, AS-32 works well when a build reaches the painting stage and broad exterior areas need consistent colour coverage. It also suits restoration or correction work on existing aircraft models, where matching an RAF grey tone can help bring separate sections back into a coherent finish.
Airbrush guns
Basic Airbrush, spray tool, 17cc paint cup
300074531€57.99
The Basic Airbrush combines a pistol-grip body, trigger operation and a 17cc paint cup in a compact spray tool for model finishing. Paint feeds from the top-mounted cup toward a standard nozzle and thin needle, giving controlled mist output for broad body panels, smaller sections and repeated test sprays before a final coat. A needle stopper on the top of the body changes trigger sensitivity and paint emission, so the setup can be tuned for heavier coverage or a finer pattern. The manual states an optimal spray distance of 10 to 15 cm for overall painting, while examples at 2 cm and 10 cm show how distance and spray volume affect the finish. Acrylic, enamel and lacquer model paints can be used when thinned to the stated consistency, and the cup cover helps reduce spillage during use. The included wrench supports nozzle maintenance, and the serviceable layout with nozzle cover, needle guide, center block, packing and O-ring allows thorough cleaning after painting. For workshop use, the airbrush connects by hose to a separately available compressor rather than an air can. It suits body shells, parts and detail areas where paint flow, distance and trigger input need to be adjusted to the surface being coated. Warning! Not suitable for children under 14 years.
Airbrush guns
Basic Compressor w/Airbrush, spray system set
300074520€169.99
The Basic Compressor w/Airbrush brings compact air supply and precision spray application together in one painting setup for detailed hobby finishing. The black compressor unit feeds air through a hose to the handheld spray gun, while the mounted cup supports controlled paint delivery across small surfaces, edges and shaped parts. The studio image shows a carry-handle shaped top, ribbed side panels and a red power switch on the base, giving the unit a clear bench-ready layout. Red control accents on the airbrush stand out against the slim metal barrel and nozzle, making the working parts easy to identify during setup and use. A second translucent container is connected in line with the hose, adding another visible fluid reservoir to the system. The overall arrangement suits careful coating work where even application and directed spray matter more than broad coverage. On a model bench, the compressor can stay in place while the hose-guided airbrush moves around body shells, figures, scenery parts or other small components. The compact format also fits craft and finishing tasks that call for a finer spray pattern than a larger paint tool can provide. Warning! Not suitable for children under 14 years.
Airbrush guns
Compact Air Compressor for Airbrush Painting
300174533€124.99
The Compact Air Compressor brings a dedicated air source to airbrush painting in a compact tabletop format that suits focused hobby work. Its attached black air hose ends in a metal connector fitting, creating a direct link between compressor and airbrush for controlled paint application on detailed surfaces. A red power button sits on the top of the gray housing, while a green indicator light provides a clear visual check during operation. The compact body keeps the setup neat on a workbench, and the hose can be positioned beside models, parts or painted sections without the compressor needing to sit right next to the work area. The visible SPRAY-WORK designation places it within Tamiya's airbrush system, giving model painters a dedicated tool for steady airflow rather than improvised household equipment. This format suits careful coating, touch-up passes and detail painting where brush marks are not wanted and paint control matters across small sections. On a hobby desk, the compressor can sit beside paints, masking materials and unfinished model parts while the hose reaches the area being sprayed. For model finishing sessions that call for repeatable airflow and a compact footprint, this compressor adds a practical workshop component built around airbrush use.
Diorama texture colours
Diorama Texture Paint Soil/Brown 250ml, paint
300087121€25.991 l = €103.96
Diorama Texture Paint Soil/Brown 250ml brings dark earth texture straight onto scenery surfaces with a water-based, paste-like formula. Special resin particles give the paint body for reproducing the dark soils common in Europe, while the wet surface stays workable long enough to press in uneven contours, shallow tracks or rough ground before the 4 to 5 hour drying time is complete. The thick consistency does more than add colour. It also conceals the base underneath and can be used like putty to fill small gaps in groundwork, edges or joins between scenic sections. One 250 ml jar covers about 250 x 353 mm at 2.5 coats, which helps when planning terrain areas on display bases or model scenes. If the mix becomes too dense during use, it can be thinned with water. Cleanup is also done with water before the material sets, and the formula has only a slight smell. Application suits a spatula or an old paintbrush, especially when building up thicker earth effects on embankments, roadside verges or worn ground around structures. After drying, the textured surface can be finished further with washing and dry brush effects using enamel paints, opening up layered weathering and more varied soil tones across the scene. Warning! Not suitable for children under 14 years.
Airbrush guns
HG Trigger-Type Airbrush 0.3mm Spray Gun
300074510€249.99
The HG Trigger-Type Airbrush 0.3mm combines a pistol-style grip with controlled paint delivery for detailed hobby finishing and broader coated areas in the same session. Its trigger action starts airflow with a light pull, then releases paint mist as the trigger moves farther back, giving a clear, mechanical feel while working across model surfaces. A 0.3 mm nozzle and internal needle system handle the spray pattern, while the rear needle adjuster changes trigger movement to set a lighter or heavier paint output. The top-mounted 7 cc metal paint cup uses gravity feed and comes with a cover to help limit spills during use. A nozzle wrench is included for maintenance, and the airbrush body also uses an air stop valve setup that can be removed when used with certain compatible compressor arrangements described in the supplied instructions. The PF1/8 threaded joint cap is designed for connection to a compatible air regulator hose. For painting sessions, the airbrush suits careful work on model bodies, parts and other hobby surfaces where paint flow needs to be varied during the pass. An air source such as a propellant can or air compressor is required separately, and a compatible adapter set may also be required when using a propellant can. Warning! Not suitable for children under 14 years.
Airbrush guns
HG Wide Airbrush Trigger Type Spray Gun
300074523€239.99
The HG Wide Airbrush Trigger Type is built for controlled spray work with a trigger-style mechanism, a chrome-finished metal body and a black pistol-grip handle. The hand position supports steady guidance during painting, while the wide-format layout suits broader coverage on model surfaces, body shells and other finishing parts. A gravity-feed paint cup sits on top of the airbrush, placing colour close to the nozzle path for direct delivery during use. At the front, the nozzle assembly concentrates the spray for measured application on contours, edges and shaped sections where even coverage matters. The rear handle section extends the body for balanced handling, and the threaded connection points at the rear and underside are designed for use with compatible hose or fitting setups. This layout suits workshop tasks that call for controlled coating rather than brush marks. On the bench, the airbrush supports painting sessions that move between larger panels and more defined sections without changing tools. It fits model finishing, decorative coating and similar spray applications where a stable grip, guided trigger input and a focused nozzle pattern help keep the work clean and deliberate. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-12 IJN Gray Kure Arsenal, paint, flat 10 ml
300082112€3.491 l = €349.00
LP-12 IJN Gray Kure Arsenal is a flat paint color in a 10 ml bottle, created for scale finishing where a low-sheen surface suits the subject better than a glossy coat. The muted gray tone aligns with naval and military paint schemes that call for a restrained, service-style appearance on hull sections, structures and smaller fitted parts. Within the LP-Paint range, this shade gives model builders a clearly identified color reference for Kure Arsenal gray, which helps when a build calls for repeatable touch-ups or matching separate assemblies before final placement. The flat finish reduces reflected shine on painted areas, so panel lines, edges and weathering effects remain visually readable after the coat dries. The 10 ml volume also suits focused bench work, where a specific color is kept on hand for detail passes rather than broad mixed batches. On ship models, the shade can be used across superstructure sections, deck equipment and correction work after sanding or seam cleanup. It also fits military display projects where a subdued gray finish supports markings, washes and layered paint effects without pushing the surface toward a polished look.
Lacquer colours
LP-13 IJN Gray Sasebo Arsenal, paint, flat 10 ml
300082113€3.491 l = €349.00
LP-13 IJN Gray Sasebo Arsenal brings a flat military shade into the Tamiya LP-Paint range, giving scale finishing work a subdued grey tone that suits naval subjects and other historically styled model surfaces. The 10 ml jar keeps the format compact on the workbench and easy to store alongside other colours in a paint lineup. The colour designation points to IJN Gray Sasebo Arsenal, making this jar a focused choice when a project calls for that specific reference rather than a general grey. Its flat finish helps avoid reflective shine on painted areas, which can matter on hull sections, superstructure details, aircraft panels or other parts where a matte appearance supports the intended look. The jar format also suits controlled use on smaller sections, follow-up correction work and staged painting sessions where only a modest amount is needed at a time. On the bench, LP-13 fits naturally into model painting routines that move between base coating, detail passes and final visual balancing across different assemblies. The compact 10 ml size works well for keeping several distinct shades close at hand during ship, aircraft or military model projects where colour accuracy and finish type both shape the final result.
Lacquer colours
LP-17 Linoleum Deck Brown, paint, 10 ml
300082117€3.491 l = €349.00
LP-17 Linoleum Deck Brown is a flat paint supplied in a 10 ml jar for model finishing work that calls for a subdued brown tone rather than a reflective surface. The colour reference LP-17 gives a clear match point when a build needs the same shade repeated across separate stages or multiple parts. The flat finish changes how painted sections read under light, helping deck surfaces, trim areas and small details keep a more scale-appropriate look where gloss would appear too bright. The compact jar format fits neatly into a bench setup and supports controlled use during brush work, touch-ups or other small-area applications. The shade name Linoleum Deck Brown points to a specific brown character instead of a broad general colour family, which helps when planning a scheme with several distinct tones. The BasicText identifies this as part of the Tamiya LP-Paint range and states the 10 ml content directly. On the bench, LP-17 suits projects that need repeatable brown detailing across separate sessions, whether the work focuses on a single section or on several painted parts that need the same tone carried through consistently. It also works well as a stored reference shade in a paint lineup where exact colour calls matter during later corrections and finishing passes.
Lacquer colours
LP-25 Brown JGSDF Flat, paint, 10 ml
300082125€3.491 l = €349.00
LP-25 Brown JGSDF Flat brings a muted military brown to scale painting work, with a flat finish that keeps reflections low on vehicle panels, equipment parts and diorama details. The 10 ml bottle suits bench setups where a specific colour is needed for detail painting, touch-ups or small-area coverage rather than large-volume coating. This LP paint is identified as JGSDF Brown, giving builders a named reference instead of a general brown tone when matching military subjects. The safety data lists the paint as a liquid coating and marks it with flammable, skin irritant, skin sensitising and serious eye damage classifications, so handling belongs in a well-ventilated workspace with the labelled precautions observed. The documented flash point is -3°C, and the boiling range is 77-190°C. The paint is brown in colour with a pungent odour, and the transport classification lists UN 1263 PAINT, Class 3. On the workbench, LP-25 fits jobs such as brushing raised details, refining camouflage sections or correcting small painted areas after assembly. It also suits diorama accessories and military equipment parts where a flat surface appearance helps the colour sit naturally beside other matte tones in the same scene.
Lacquer colours
LP-27 German Grey Flat, paint, 10 ml bottle
300082127€3.491 l = €349.00
LP-27 German Grey Flat brings a dark grey tone to model finishing in a compact 10 ml bottle that suits bench work where controlled quantities matter. The flat finish keeps reflected light low, which helps painted surfaces read with a more subdued appearance on military subjects, machinery details and weathered components. Within the LP paint range, this shade adds a specific colour option for builders who plan paint schemes with distinct tonal steps rather than broad generic greys. The 10 ml volume is easy to handle during brush application and also practical when a project needs measured amounts for smaller sections, separate parts or later touch-up work. The bottle format stores efficiently alongside other colours in a workshop setup, keeping frequently used shades close at hand during ongoing builds. On the bench, LP-27 German Grey Flat suits detail sessions such as painting equipment housings, interior sections or accent areas that benefit from a darker, non-gloss look. It also works well when a build calls for contrast between flatter grey surfaces and neighbouring colours with a different finish, helping individual sections stand apart with a clear visual change.
Lacquer colours
LP-29 Olive Drab 2 Flat, paint, 10 ml
300082129€3.491 l = €349.00
LP-29 Olive Drab 2 Flat is a 10 ml paint for scale modelling work where a muted dark green finish suits the subject. The flat formulation supports a non-gloss surface appearance, which helps visual details read cleanly on panels, edges and smaller shaped areas once the paint is applied. The coded LP-29 designation keeps shade selection clear when a build calls for a specific colour reference rather than a general green tone. Olive Drab 2 is commonly chosen for military-style subjects, field equipment looks and other schemes that rely on restrained colour rather than shine. The 10 ml volume is easy to handle at the workbench and suits controlled use across detail painting, touch-ups and smaller coverage tasks. The label imagery for this paint shows hazard pictograms for flammable, irritant or harmful, and corrosive handling warnings, so it should be handled with appropriate care. On the bench, this paint fits naturally into finishing stages where separate parts, body sections or accessories need a flat dark green coat. It also works well in colour-matched touch-up steps, where a coded shade helps keep the final look consistent across the model.
Lacquer colours
LP-32 Light Gray Flat, paint, 10 ml bottle
300082132€3.491 l = €349.00
LP-32 Light Gray Flat is a 10 ml paint bottle in an IJN light gray shade, suited to model finishing where a muted surface and clearly defined colour reference matter. The flat finish reduces shine on painted areas, helping panels, structures and smaller details read with a more restrained appearance under display lighting or during close-up work. The LP-32 code gives builders a precise point of reference when following colour plans, returning to an earlier project or keeping separate painted sections aligned in tone. The 10 ml bottle size fits bench work that calls for measured use rather than bulk coverage, especially on smaller assemblies and targeted corrections. The shade name Light Gray Flat and the IJN designation make the bottle easy to sort within a broader paint collection. Hazard symbols shown on the pack indicate that handling and storage should follow the labelled precautions. On the workbench, this paint suits sessions focused on cockpit sections, exterior panels, equipment parts or other model areas that benefit from a non-gloss finish. It also works well when a project calls for repeat access to the same coded shade across several stages of painting and refinement.
Lacquer colours
LP-33 Gray Green Flat, paint, 10 ml
300082133€3.491 l = €349.00
LP-33 Gray Green Flat is a 10 ml paint for model finishing work, identified in the data as Gray Green with an IJN reference. The flat finish suits surfaces where a non-gloss appearance is needed, from larger exterior sections to smaller raised details that benefit from a more muted painted look. The 10 ml bottle size fits neatly into a modelling setup and supports controlled use during brush application, touch-up work and colour matching across separate assemblies. The LP-Paint designation places this shade within a dedicated paint range for scale modelling, making it easier to select a named colour when a build calls for a specific military tone. On aircraft, ship or vehicle projects that use IJN-marked colours in the instructions or reference plan, this shade provides a direct match point from the stated range name. On the workbench, LP-33 can be used for detail passes, panel sections or small corrections where a consistent flat colour matters. It also suits staged painting sessions, where separate subassemblies are finished individually and then brought together with the same Gray Green tone across the completed model.
Lacquer colours
LP-41 Mica Blue, paint, gloss finish 10 ml
300082141€4.491 l = €449.00
LP-41 Mica Blue brings a gloss blue finish to model painting in a compact 10 ml jar, giving small parts and selected sections a bright, reflective colour accent. The shade suits detailed finishing work where a clear blue tone and controlled paint quantity matter more than broad coverage. The LP paint designation identifies this colour as LP-41, which helps keep paint planning consistent across larger builds, touch-up work and repeat applications on matching parts. The 10 ml content is easy to slot into a bench setup alongside other finishing supplies, especially when a project calls for precise colour placement rather than large-volume use. The gloss surface effect gives painted areas a shinier appearance than a flat coat, which can help body details, trim pieces or visual accents read more clearly once the paint has cured. On the workbench, this paint suits careful brush or airbrush preparation where individual components are painted before final assembly, as well as later correction work on completed models. It also fits custom colour layouts that combine blue highlights with contrasting tones on scale vehicles, accessories or display-focused builds.
Lacquer colours
LP-49 Pearl Clear Gloss, lacquer paint, 10 ml
300082149€4.491 l = €449.00
LP-49 Pearl Clear Gloss is a lacquer paint for model finishing, supplied in a 10 ml jar and formulated as a pearl clear gloss coat. The clear base adds a lustrous surface effect while allowing the colour beneath to remain visible, making it useful when a build needs extra shine with a subtle pearlescent shift under changing light. Within the LP-Paint range, this finish suits focused paintwork on body sections, trim areas and selected details where a standard colour coat is already in place. The pearl effect changes the visual character of the painted surface through the clear top layer rather than covering it with an opaque tone. The compact 10 ml size also supports controlled use on smaller parts, touch-up work and staged finishing sessions at the workbench. On display shelves, diorama scenes or completed vehicle bodies, LP-49 Pearl Clear Gloss helps create a brighter final surface with added depth in the finish. It also fits projects that call for selective contrast between standard gloss areas and pearl-highlighted sections. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-50 Bright Red Gloss, model paint, 10 ml
300082150€3.491 l = €349.00
LP-50 Bright Red gloss brings a strong, reflective red tone to scale model finishing in a compact 10 ml format. The gloss surface gives painted sections a clean sheen that stands out on body panels, trim pieces and other defined areas where a solid colour statement matters. This paint sits within the LP range and is identified by the LP-50 shade code, which helps keep colour selection clear when a build uses several finishes across different stages. The 10 ml bottle size suits controlled application on smaller parts, correction work and targeted repainting rather than broad coverage. Bright Red gloss can be used where a model calls for a vivid red section with a polished look, whether the focus is a single accent piece or a more visible exterior area. The compact format also makes it easy to keep multiple shades organised on a workbench without taking much space. On active build sessions, this colour fits naturally into painting steps that move between base colours, detail sections and final visual refinement. It also works well for returning to an earlier build for touch-ups, colour matching or refreshing selected parts with the same LP-50 Bright Red gloss tone.
Lacquer colours
LP-56 Flat Dark Green 2, lacquer paint, 10 ml
300082156€3.491 l = €349.00
LP-56 Flat Dark Green 2 is a lacquer paint for model finishing in a compact 10 ml bottle. The defined Dark Green 2 shade and flat surface effect suit projects that call for a muted, non-gloss colour, whether the goal is covering small sections, refining edges or matching surrounding painted areas on a scale build. The 10 ml content keeps the bottle practical for bench use and easy to place alongside other colours in a paint set. The flat finish changes how light sits on the painted surface, giving panels and details a more subdued look than a gloss coat. The shade name is stated directly as Flat Dark Green 2, which helps when selecting a specific tone for repeat work across separate parts. The bottle format also suits controlled application on detail zones where a measured amount of paint is more useful than a large container. This paint fits naturally into model building sessions that include body finishing, detail correction or colour-specific retouching. It can be used when a project needs a darker green with a flat appearance on individual components, small assemblies or selected surface sections.
Lacquer colours
LP-6 Pure Blue, paint, gloss finish 10 ml
300082106€3.491 l = €349.00
LP-6 Pure Blue is a gloss paint for model finishing, supplied in a 10 ml jar and suited to adding a clear blue tone to scale builds. The colour works well where a strong, defined shade is needed on body sections, trim parts or smaller painted details, giving surfaces a bright gloss look that stands out under display lighting. Within the LP paint range, Pure Blue supports both broad coverage and more focused detailing. The 10 ml content is practical for planned colour placement, whether the task is coating selected panels, refining accent areas or handling touch-up work on a build already in progress. The gloss finish changes how the blue reads across edges and contours, helping shaped parts catch light differently from flat sections. That makes the shade useful not only for larger visible areas, but also for parts where contrast and colour separation matter. On the workbench, LP-6 Pure Blue fits naturally into painting stages that call for a vivid blue with a glossy surface character. It can be used during fresh builds, repainting sessions or detail updates, bringing a crisp colour note to model projects that rely on clean, high-visibility finishing.
Lacquer colours
LP-64 Olive Drab, lacquer paint, flat 10 ml
300082164€3.491 l = €349.00
LP-64 Olive Drab brings the flat JGSDF vehicle tone into the Tamiya Color Lacquer Paint range in a compact 10 ml bottle, ready for military finishes that need an even, non-gloss surface. The colour is suited to full body coverage on scale subjects and to smaller passes on equipment, panels or field gear where a uniform olive drab shade keeps the finish consistent. The lacquer formula supports 2 painting methods from the same jar: airbrushing for larger areas and brush application for smaller details. Its quick drying behaviour keeps painting sessions moving between coats, while the cured paint film forms a tough membrane that can serve as a basecoat under enamel paints. That makes LP-64 useful not only for the main colour layer, but also for staged finishing work where washes, detail colours or further effects follow later. A dedicated thinner is available for users who want to adapt the paint for their preferred application method. The bottle measures 44 mm in height and 35 mm in width, matching the dimensions of the Tamiya Color Acrylic Paint Mini series for shared stand storage. On the bench, that compact format keeps frequently used military shades close at hand for repeat touch-ups, small assemblies and ongoing vehicle projects.
Lacquer colours
LP-74 Flat Earth, paint, 10 ml bottle
300082174€3.491 l = €349.00
LP-74 Flat Earth brings a muted brown tone to model finishing in a compact 10 ml bottle, giving builders a dedicated colour for groundwork, weathering and scale surfaces that call for an earthy, low-sheen look. The shade sits within the LP paint range and is identified clearly as LP-74 Flat Earth, making it easy to match across repeat sessions and ongoing builds. A 10 ml volume suits focused bench work, whether the task is covering small accessories, refining terrain sections or adding subtle tonal change to body parts and diorama elements. The colour name points to natural soil and dust effects, which helps when planning realistic finishes for military scenes, field settings or worn exterior details. The bottle size also keeps storage straightforward alongside other modelling colours and finishing supplies. On the workbench, Flat Earth can be used for base layers, selective touch-ups or blended effects where a plain brown would look too strong or too glossy. It suits projects that move between vehicles, scenery and display bases, keeping the finish visually grounded while leaving room for further shading, dry brushing or pigment work.
Lacquer colours
LP-76 Yellow-Brown DAK 1941, paint, 10 ml
300082176€3.491 l = €349.00
LP-76 Yellow-Brown DAK 1941 brings a specific military colour reference into the LP paint range, giving scale builders a flat finish for model surfaces that call for a subdued, period-style tone. The 10 ml jar size keeps the paint compact on the bench while still offering enough material for detail sections, touch-ups and smaller area coverage. The shade name points directly to DAK 1941, making this colour a focused choice when a build calls for that exact yellow-brown character rather than a generic earth tone. The flat finish reduces surface sheen, which helps painted sections sit more naturally alongside weathering, dust effects and other matte details. The LP designation places it within Tamiya's paint system, so it can take its place among other dedicated colours used across bodywork, accessories and diorama elements. The jar format also keeps the paint easy to store, identify and return to during multi-stage finishing work. On the workbench, this paint suits careful brush application on edges, tools and smaller fittings, and it also fits broader finishing sessions where several authentic tones are combined across one model. For restoration of painted details or adding contrast to selected sections, LP-76 keeps a clearly named reference colour close at hand.
Lacquer colours
LP-77 Light Brown DAK 1942, paint, 10 ml
300082177€3.491 l = €349.00
LP-77 Light Brown DAK 1942 brings a flat historical shade to scale model finishing, with a 10 ml content size that suits careful bench work and controlled use on smaller painted areas. The muted Light Brown DAK 1942 tone supports period-focused colour layouts where a non-gloss surface is part of the intended final look. Within a paint lineup, a clearly named shade like LP-77 helps keep finishing steps organised across base layers, detail sections and later corrections. The flat finish changes how light sits on the painted surface, reducing shine and keeping panel shapes, edges and added details visually clear. The 10 ml bottle size also makes it practical to keep several distinct colours on hand for multi-tone camouflage, equipment parts or selective repainting on a single build. Where a scheme calls for a historical desert tone, this colour gives that reference directly in the name rather than leaving the match to guesswork. On the workbench, LP-77 suits model projects that need a restrained brown tone for armour, military vehicles or selected accessories. It also works well for touch-up stages after assembly and for refining small sections where a full repaint is unnecessary.
PS spray colours
PS-25 Light Green, polycarbonate spray paint
300086025€10.991 l = €109.90
PS-25 Light Green is a spray paint developed for polycarbonate model bodies, giving RC shell projects a bright, solid colour with the convenience of aerosol application. The 100 ml can suits builders working on clear bodyshells that need smooth coverage across curved panels, roof sections and arch lines. This paint is intended for polycarbonate surfaces rather than general craft use, which makes it relevant for many RC car body jobs where the colour is applied to the inside of the shell. That placement leaves the outer surface clear while the painted layer sits behind it, a common approach for preserving the finish during regular handling. Light Green works well as a full-body colour, as a masked section in a multi-tone livery, or as a contrasting panel within a race-inspired scheme. The spray format also helps reach broad sections more quickly than brush application on larger shell areas. On the bench, PS-25 fits naturally into body finishing steps such as masking windows, defining stripes and building up colour in successive coats. It also suits refresh work on replacement bodyshells when a familiar colour layout needs to be recreated with the same shade family. Warning! Not suitable for children under 14 years.
PS spray colours
PS-33 Cherry Red, polycarbonate spray paint
300086033€10.991 l = €109.90
PS-33 Cherry Red brings a strong solid finish to polycarbonate model bodies, with a spray format that suits broad curved surfaces and recessed body lines alike. The 100 ml aerosol can gives model builders a practical way to apply colour across RC shells while keeping the handling focused on steady, even passes. The formula is specified for polycarbonate, making it relevant for many clear bodyshells used in RC car building and refurbishment. Cherry Red works for full-body colour layouts, replacement finishes on worn shells, or fresh custom schemes built around masking and layered paintwork. The aerosol format helps cover roof sections, side panels and arch contours more quickly than brush application on larger shell areas. In a paint lineup, this shade also serves as a direct colour reference when matching existing red graphics or extending a livery across replacement body parts. On the workbench, the can fits naturally into body preparation and finishing sessions where a shell moves from clear surface to race-ready colour. It also suits restoration work on used polycarbonate bodies, where a single 100 ml can offers a straightforward format for renewing the visual character of an RC build. Warning! Not suitable for children under 14 years.
PS spray colours
PS-35 Blue-Violet, polycarbonate spray paint
300086035€10.991 l = €109.90
PS-35 Blue-Violet is a spray paint for polycarbonate model parts, supplied in a 100 ml can for hobby finishing work. The Blue-Violet shade gives clear bodyshells a bold colour layer that suits racing liveries, custom builds and fresh repaint projects on RC models. The formula is specified for polycarbonate, making it suitable for the material commonly used in lightweight RC bodyshells and similar formed parts. Aerosol application helps spread colour across broad roof panels, curved fenders and narrow edges with a continuous spray pattern rather than brush strokes. This supports cleaner coverage on shells with moulded contours, window lines and cut-out sections. The can format also fits bench setups where a single colour needs to be applied quickly and evenly across the inside of a clear body. In use, PS-35 suits body painting sessions that move from masking and colour blocking to final visual detailing on track cars, drift shells or display-focused RC builds. It also works well when refreshing worn finishes on existing polycarbonate bodies or adding a distinct Blue-Violet tone to a new custom scheme. Warning! Not suitable for children under 14 years.
PS spray colours
PS-36 Translucent Silver, polycarbonate spray
300086036€10.991 l = €109.90
PS-36 Translucent Silver is a 100 ml spray paint for polycarbonate model bodies, created for hobby paint work where a clear shell needs a metallic tone that still lets light and the underlying surface affect the final appearance. The translucent character gives painted bodyshells a different result from an opaque coat, making it useful for layered colour planning on RC body projects. Used on clear polycarbonate, this spray supports custom finishes with a silver effect that can shift in depth depending on the backing colour and the number of coats applied. The aerosol format helps distribute paint across broad roof sections, curved fenders and tighter body contours with an even mist. In a model supplies setup, PS-36 belongs to the paint stage of body preparation rather than chassis assembly, with the colour choice shaping the final look of racing, touring or off-road shells. On the bench, the 100 ml can fits focused paint sessions for single bodyshell projects or detail-led colour schemes. In RC body customising, Translucent Silver works where a finish needs metallic character while keeping the visual effect of a clear polycarbonate shell in play. Warning! Not suitable for children under 14 years.
PS spray colours
PS-38 Translucent Blue, polycarbonate spray paint
300086038€10.991 l = €109.90
PS-38 Translucent Blue is a polycarbonate spray paint created for model body finishing where colour needs to stay transparent rather than cover solidly. The translucent blue tone lets the shell lines, moulded contours and cut body shape remain visible, which suits RC bodyshell work that relies on layered colour and light passing through the painted surface. The can contains 100 ml and is intended for spray application on polycarbonate parts. Within the PS paint range, this shade sits alongside PS-37 to PS-40, and Tamiya specifically recommends backing these colours with PS-41 Light Silver. That backing step changes how the translucent layer reads on the shell, giving the finished colour more presence while keeping the transparent character of the paint. This makes PS-38 useful for full body coverage, tinted sections or accent areas where a clear colour effect is part of the final look. On the bench, PS-38 fits naturally into custom RC body painting, whether the aim is a single-colour shell or a layered scheme with masked sections and backing coats. It also works well when a bodyshell needs a blue transparent tone that still shows the form of the polycarbonate underneath, especially on curved panels, roof sections and flowing side lines. Warning! Not suitable for children under 14 years.
PS spray colours
PS-50 Alu-Effect Red, polycarbonate spray paint
300086050€18.491 l = €184.90
PS-50 Alu-Effect Red is a 100 ml spray paint developed for polycarbonate model bodies, bringing a metallic red finish with an aluminium effect to clear RC shells. The aerosol format makes it easy to cover broad curves, rooflines and front sections evenly, so a bodyshell can take on a vivid, reflective look that stands out on the track or on the shelf. This paint is specified for polycarbonate use rather than general hobby surfaces, which matters when working with flexible RC body material. The colour code PS-50 helps match the can to a planned livery or replacement coat during a build. The source data also recommends PS-5 black when painting with this colour, giving modelers a clear backing-coat reference for the intended final appearance. The 100 ml volume suits full shell coverage as well as touch-up work on replacement bodies, depending on bodyshell size and layout. In use, PS-50 Alu-Effect Red fits naturally into RC body finishing sessions, whether the goal is a single-colour race shell or a more detailed custom design. It works well for painting from the inside of clear polycarbonate bodies, where the colour shows through the shell and the outer surface keeps its smooth gloss. Warning! Not suitable for children under 14 years.
PS spray colours
PS-51 Purple Anodized Effect, spray paint, 100 ml
300086051€18.491 l = €184.90
PS-51 Purple Anodized Effect brings a metallic spray finish to polycarbonate model parts with a colour developed specifically for that material. The 100 ml aerosol format supports controlled coverage on clear bodyshell sections, where the final tone builds through the painted layer and the backing colour behind it. This shade is intended for polycarbonate use rather than general craft painting, which matters on RC shells and similar formed parts that flex in use. The anodized-style purple effect gives body panels a more technical, machined look than a flat solid colour. Because the paint is applied to clear polycarbonate, the backing coat influences the visible result. For PS-51, Tamiya recommends PS-5 black, which deepens the finish and helps the colour read with more visual depth through the shell. The can suits hobby bench work focused on body customisation, repainting selected sections or finishing a fresh shell before decals and final assembly. On race-inspired bodies, the colour works well for full-body coverage, accent areas or layered paint schemes where a darker backing is part of the planned result. Warning! Not suitable for children under 14 years.
PS spray colours
PS-56 Mustard Yellow, polycarbonate spray paint
300086056€12.191 l = €121.90
PS-56 Mustard Yellow is a spray paint for polycarbonate model bodies, bringing a solid colour finish to RC shell projects with a shade that stands out clearly on track-focused designs and custom bodywork. The 100 ml aerosol can gives the paint in a ready-to-spray format suited to broad exterior coverage on formed shells. The paint is specified for polycarbonate, making it the matching choice for this body material when finishing hobby shells that flex in use. Mustard Yellow works as a full-body colour, a contrasting section in a multi-tone livery, or a visual accent on selected panels. The PS-56 shade code gives a clear reference for repeat work, touch-up planning, or matching the same colour across more than one shell. The cap label and can marking keep the colour easy to identify in a workshop drawer or paint rack. In RC body preparation, this spray can fits the stage where a clear shell moves into a finished racing look. It suits fresh body projects, replacement shells, and repaint work where a defined yellow tone is needed for stripes, roof sections, side panels, or complete coverage on polycarbonate bodies. Warning! Not suitable for children under 14 years.
PS spray colours
PS-57 Pearl White, polycarbonate spray paint
300086057€14.491 l = €144.90
PS-57 Pearl White is a spray paint for polycarbonate model bodies, bringing a bright pearl finish to RC shells with a format that suits broad exterior panels and shaped contours. The 100 ml can gives model builders a practical amount for colour application on compatible bodyshell surfaces, whether the goal is a full single-colour scheme or a light-catching base for a more detailed livery. The polycarbonate specification matters because RC bodyshells flex differently from rigid display parts, and this paint is designated for that material in the product data. Pearl White adds a distinct visual effect beyond a flat solid tone, giving curved roof sections, fenders and side areas a cleaner highlight under workshop light or outdoor running conditions. The spray format also helps cover larger shell areas more evenly than brush application, which is useful when keeping colour continuity across multiple body lines. On the bench, PS-57 suits fresh body projects, replacement shells and repaint work on compatible RC car bodies. It also fits builders planning race-inspired colour layouts, where a bright white pearl layer can define the main body colour before decals and trim details are added. Warning! Not suitable for children under 14 years.
PS spray colours
PS-58 Pearl Clear, polycarbonate spray paint
300086058€14.491 l = €144.90
PS-58 Pearl Clear brings a transparent pearl effect to polycarbonate bodyshell painting, adding a light-catching finish while letting the chosen base shade remain visible. Applied over a PS-XX colour, the coating changes with the underlying tone, so the same spray can create different results across racing, touring or custom shell designs. The 100 ml can gives a practical format for body painting sessions and suits broad exterior areas as well as tighter contours around arches, rooflines and rear sections. Because the effect layer is clear rather than opaque, colour planning stays central to the final look: darker base coats can produce a deeper shimmer, while brighter tones can push the pearl effect forward more strongly. The stated pairing matters here, as PS-58 Pearl Clear is designed to work with PS-XX paints as the background. PS-55 Clear coat matt is excluded as a base for this effect. This spray fits the finishing stage of RC bodyshell projects where colour choice and surface effect shape the final character of the model. It can be used to refine a fresh shell build, update an existing polycarbonate body, or add another visual layer to a competition or display-oriented paint scheme. Warning! Not suitable for children under 14 years.
PS spray colours
PS-8 Light Green, polycarbonate spray paint
300086008€10.991 l = €109.90
PS-8 Light Green is a spray paint for polycarbonate model bodies, supplied in a 100 ml aerosol can for fast, even colour application on curved shell surfaces. The Light Green shade stands out clearly on RC bodyshell designs, whether the finish is used for a full single-colour body or as part of a masked multi-tone scheme. The formula is specified for polycarbonate, making it suited to the material used in many RC car shells and similar clear body panels. The aerosol can format helps cover broad areas such as roofs, sides and arches with a continuous spray pattern, while still reaching tighter contours around body lines and cut-outs. This makes PS-8 useful for fresh body builds, replacement shells and repaint work where the colour needs to match an existing scheme. The can is labelled for adult modelers only, and the pack carries hazard pictograms for flammable, irritant and corrosive handling warnings. On the bench, PS-8 Light Green fits naturally into body finishing work for touring cars, buggies and other RC models with polycarbonate shells. It can be used when laying down a bold base colour, defining masked sections, or refreshing a worn racing livery with a clean green tone. Warning! Not suitable for children under 14 years.
Airbrush accessories
Spray-Work Air Can 420D, airbrush propellant
300074516€11.491 l = €27.36
Spray-Work Air Can 420D is a pressurized air source for airbrush use, built to support controlled spraying in model painting and hobby finishing. The upright canister pairs with compatible airbrush equipment to deliver the airflow needed for even application, whether the task is broad base coating or careful work along smaller edges and shaped surfaces. The 420 ml format gives this can a larger reserve than smaller workshop refills, which helps keep painting sessions moving with fewer changeovers. The fill consists of dimethyl ether at 99 - 100%, identified in the safety data as a liquefied gas. Hazard marking is stated as H220 for extremely flammable gas and H280 for gas under pressure. The can is marked for airbrush use, and the label illustration shows the intended handling position during spraying. Storage guidance in the supplied safety information states protection from sunlight and temperatures above 50°C, with storage in a well-ventilated place. On the bench, this air can suits detail painting on scale models, parts and hobby surfaces where an airbrush is used for measured coverage and cleaner transitions. It also works well as a practical refill choice for builders who prefer a self-contained propellant can instead of a compressor setup.
Airbrush accessories
Spray-Work Airbrush Stand II, airbrush stand
300074539€21.99
The Spray-Work Airbrush Stand II brings order to hobby painting sessions by giving the airbrush a dedicated resting place on the workbench. Its upright tabletop format keeps the spray tool close at hand during colour changes, short pauses and cleaning steps, while the tray-style base helps separate the airbrush from wet paint residue and loose bench clutter. The stand is designed for model finishing work where steady handling and a clear layout matter. A mounted holder keeps the airbrush positioned above the base instead of lying flat on the table, which helps maintain access to the trigger, paint cup and nozzle area between passes. The tray section also creates space for small jars and painting accessories used during spraying. In a compact workshop corner, that layout supports a tidier sequence for mixing, setting down the airbrush and returning to the next coat. Placed beside a cutting mat, spray booth or paint station, the stand supports a more structured routine for priming, colour application and cleanup. It suits builders who rotate between several paint jars in one session and need a stable place to park the airbrush while adjusting paint, checking coverage or preparing the next step. Warning! Not suitable for children under 14 years.
Airbrush guns
Spray-Work HG SF Airbrush, airbrush, 0.2 mm
300074514€179.99
The Spray-Work HG SF Airbrush is a precision spray painting tool built for detailed hobby finishing, combining a superfine 0.2 mm nozzle with trigger control for careful, even paint application. In close work, the airbrush can spray lines of 0.5 mm width or smaller at a distance of less than 1 cm, making it well suited to camouflage patterns, fine edging and other narrow painted details. A gravity-feed paint cup sits on top of the metal body, helping paint move smoothly into the spray path, while the cup cover helps keep the paint in place during use. The rear needle adjuster changes trigger and needle movement to reduce or increase paint flow, and the spray pattern can be set from fine to wide depending on the task. For larger painted areas, the recommended working distance is about 10 to 15 cm. The set also contains a needle adjuster, needle and nozzle cover, hose connector, hose connector with air stop valve and a nozzle wrench for setup and maintenance. An air source is required separately. At the workbench, the airbrush supports both broad body-color coats and tight pattern work on scale subjects. After painting, the nozzle and internal paint path can be cleaned before paint cures, and the included wrench allows nozzle removal when deeper maintenance is needed. Warning! Not suitable for children under 14 years.
Airbrush guns
Spray-Work HG Single Air-Brush Spray Tool
300074519€114.99
The Spray-Work HG Single Air-Brush brings precise paint application to model finishing with a polished metal body, a top trigger and a compact separate paint cup. Its slim, tapered rear handle sits naturally in the hand, while the front nozzle assembly is arranged for focused spray work on smaller areas, edges and surface details. The detached metal cup connects directly to the airbrush body through a short stem, keeping the paint supply close to the spray path. The threaded connector at the base links the tool to an air hose, making it part of a dedicated hobby painting setup rather than a general craft sprayer. The chrome-like finish and clearly machined metal parts give the tool a clean workshop look that fits careful bench work. Batteries are not included. On a model bench, the Spray-Work HG Single Air-Brush suits tasks such as laying down controlled coats, refining colour transitions and picking out tighter sections that need a narrower working area. It also fits finishing sessions where a removable cup and compact hand position help keep the painting process orderly between passes. Warning! Not suitable for children under 14 years.
Airbrush guns
Spray-Work HG Trigger Airbrush, paint tool
300074540€249.99
The Spray-Work HG Trigger Airbrush brings trigger-operated paint control and an integrated cup into one compact spray tool for detailed finishing work. Its pistol-grip form, tapered front nozzle and top-mounted paint cup create a clear line of sight toward the spray area, which helps when following panel edges, small contours and tight masking lines on scale modelling projects. The trigger layout supports measured paint release through finger movement rather than a pen-style push action, giving the hand a different working posture during longer painting sessions. The integrated cup keeps paint close to the nozzle, which suits small-batch colour use, touch-ups and short transitions between coats. A rear adjustment section extends the body and adds another control point for handling and setup. The metal construction shown in the tool body and cup gives the airbrush a technical, workshop-focused feel suited to bench use with hobby paints. At the workbench, this format fits jobs such as shading recessed areas, refining colour boundaries and applying controlled coats to smaller parts before final assembly. An air source is required separately, with the instructions referring to a separately available propellant can or air compressor. Warning! Not suitable for children under 14 years.
Airbrush guns
SW Advance & SX 0.3D airbrush compressor set
300074563€339.99
The SW Advance & SX 0.3D combines a compact air compressor with the matching SX 0.3D airbrush for controlled spray work on model painting projects. A pressure adjustment dial on top lets airflow be tuned for different tasks, so broad coats and tighter painted details can be handled with the same tabletop unit. The compressor measures 12.5 x 7.0 x 11.5 cm, or 10 cm in depth including the hanger, which helps it fit neatly into a crowded work area. Maximum output pressure reaches about 0.20 MPa or 30 PSI, while continuous pressure is 0.08 MPa or 12 PSI, with an air output of 10 liters per minute. Power consumption is 24 W, and the 45 dB noise level keeps the running sound comparatively restrained for bench use. The integrated hanger works with a sensor switch, so the unit responds directly to the airbrush being removed or replaced. On a painting bench, that setup supports quick shifts between short detail passes and longer spraying sessions without interrupting the workflow. The included AC adapter and coiled hose complete the main connection setup for a clean, compact airbrush station. Warning! Not suitable for children under 14 years.
Airbrush guns
SW HG Airbrush III, airbrush spray gun, 0.3 mm
300074532€199.99
The SW HG Airbrush III is a precision spray gun built for controlled paint application in detailed hobby work. Its 0.3 mm nozzle supports a fine spray pattern, while the top-mounted gravity-feed cup keeps paint close to the spray path for measured flow during careful passes across small parts and narrow sections. The metal body gives the airbrush a solid hand feel, and the tapered front helps bring the nozzle close to the work area when painting edges, recesses or layered colour transitions. The removable cup with lid supports clean filling and helps keep paint contained between passes. The trigger on the top of the body controls paint release directly, which suits step-by-step coverage on model surfaces where broad spray would be too wide. The rear adjustment area adds another control point for refining how the airbrush responds during detailed work. On a workbench, the SW HG Airbrush III fits tasks such as base coating small assemblies, adding controlled colour to body sections, or refining painted details on scale subjects and craft projects. It also suits sessions that move between broader coverage and tighter touch-up work, where a compact spray tool with a 0.3 mm setup helps keep the finish consistent.
Airbrush guns
SW HG Airbrush with Integrated Cup, airbrush
300074537€199.99
The SW HG Airbrush with Integrated Cup is a double-action airbrush built for controlled, fine spray work on scale modeling and hobby painting. Its 0.3 mm nozzle and gravity-feed layout support narrow lines of 1 mm or less, making it well suited to careful color application, edge work and small-area detailing where a broad spray pattern would be too coarse. The integrated cup holds 7 cc of paint, so the airbrush keeps a compact, direct paint path from cup to nozzle. A newly designed trigger focuses on comfort during longer sessions and supports smooth control as air and paint are adjusted through the same hand movement. The metal body, rear adjustment section and hose connection fitting give the tool a layout familiar to dedicated bench painting setups. After use, the nozzle area can be cleaned with high quality thinners and airbrush cleaning solvents. On a workbench, the fine spray pattern suits camouflage edges, panel accents and subtle tonal changes on model surfaces. It also fits touch-up work on smaller assemblies where controlled paint delivery matters more than wide coverage, helping keep detail sharp while color is applied with precision.
Diorama texture colours
Texture Clay Grass Khaki, diorama paint, 100 ml
300087117€17.991 l = €179.90
Texture Clay Grass Khaki is a 100 ml diorama texture paint designed to give model scenery a grass-like ground surface with visible body and colour. The khaki shade reads as dry vegetation, dusty earth or sun-faded field cover, which helps small scenes move beyond a flat painted base and into more convincing terrain. The paint is intended for terrain reproduction and can be worked onto model bases, display plinths and landscape sections by hand. Its textured character makes it useful for breaking up smooth foam, board or base surfaces with a rougher finish that catches light differently across the scene. The mixture is described as containing binder, pigments, solvents and additives. At 20 °C, the safety data lists a pH value of 8.5 ± 1.5, a relative density of 1.1 ± 0.1 and full solubility in water. On a railway embankment, a wargaming base or a display stand for a finished vehicle, the khaki finish can suggest worn grassland, dry verges or sparse ground cover. Used across edges, patches and transitions, it helps connect roads, soil areas and scenic sections into one coherent landscape treatment. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Grit Light Sand, diorama paint, 100 ml
300087110€17.991 l = €179.90
Texture Clay Grit Light Sand gives diorama surfaces a sandy, grainy finish that changes a flat base into terrain with visible relief. The 100 ml jar combines color and texture in one material, making it suitable for groundwork that needs both a light sand tone and a rough surface character. The mixture is described for terrain reproduction and is supplied as a liquid blend of binders, pigments, solvents and additives. At 20 °C it is fully soluble in water, with a pH value of 8.5 ± 1.5 and a relative density of 1.1 ± 0.1. These material details support controlled application across scenic bases, embankments and shaped groundwork where a uniform sand effect is needed. The grit effect suits military scenes, arid landscapes, roadside shoulders and other dry settings where plain paint would look too smooth. On a display base, the light sand shade can tie vehicles, figures and structures into the same environment. Used across larger terrain sections or in smaller patches, it helps model scenes read as finished locations rather than separate parts placed on a flat surface. Protect the container from heat and keep it tightly closed during storage. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Powder-Snow White, diorama paint
300087120€17.991 l = €179.90
Texture Clay Powder-Snow White is a diorama texture paint designed to give miniature scenery a powder snow finish with visible surface character. The white formula helps turn flat bases into winter ground with a dry, settled look that reads clearly on embankments, roadside edges and landscape sections. The 100 ml bottle suits repeated scenery work across multiple projects, whether the goal is a narrow strip of snow beside a track or a broader layer across a display base. As a texture paint for terrain reproduction, it is intended for building up ground effects rather than simply recolouring a surface. The finish can add definition to uneven contours, raised edges and shaped groundwork where plain paint would leave the scene visually flat. The bottle format supports controlled dispensing during scenic detailing, and the screw cap helps keep the contents closed between sessions. On military layouts, model railway scenes or vehicle displays, the white powder snow effect can be used to frame tyres, tracks, paths or verges with a colder seasonal setting. It also works well when a base needs a clear winter identity, giving static models a more convincing environment and helping the surrounding terrain match the subject on display. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Snow White, diorama paint, 100 ml
300087119€17.991 l = €179.90
Texture Clay Snow White is a 100 ml diorama texture paint for creating snowy terrain effects on model scenery and display bases. The white compound adds visible surface character instead of a flat coat, so winter ground, roadside edges and elevated sections read with more depth in the finished scene. The material is described for terrain reproduction and works as a textured layer rather than a standard smooth paint. That makes it useful for shaping irregular coverage across groundwork, where thinner and thicker areas can suggest fresh fall, compacted snow or wind-moved patches. The jar format keeps the material ready for controlled application on smaller scenic sections, from base corners to full foreground zones. Product data also identifies the mixture as water-soluble, with a relative density of 1.1 +/- 0.1 at 20 °C and a pH value of 8.5 +/- 1.5 at 20 °C. On a display base, the white finish can frame vehicles, figures or structures with a clear seasonal setting. It also suits standalone terrain studies, where snow texture becomes the main visual feature across slopes, paths and open ground. Warning! Not suitable for children under 14 years.
Diorama texture colours
Texture Clay Soil Brown, diorama texture paint
300087108€17.991 l = €179.90
Texture Clay Soil Brown is a diorama texture paint designed to turn flat bases into convincing ground surfaces with visible soil character. The 100 ml format suits focused scenic work, whether a display calls for a dirt bank, a worn track edge or broken earth around a vehicle position. This terrain material is identified as texture paint for creating landscape reproductions, and the granular brown finish shown in the range presentation gives groundwork a more natural look than a smooth coat alone. The mixture is a liquid blend with binders, pigments and solvents with additives, and it is fully soluble in water. At 20 °C, the stated pH value is 8.5 ± 1.5 and the relative density is 1.1 ± 0.1. These technical details support controlled scenic application where surface character matters as much as colour. On a compact display base, the brown soil effect can shape rutted paths, sloped terrain and disturbed ground around tracked or wheeled subjects. It also suits miniature landscape sections that need a dusty, worked-earth appearance, helping static models sit more convincingly in their scene rather than on a plain painted platform. Warning! Not suitable for children under 14 years.
TS spray colours
TS-10 French Blue Gloss, spray paint, 100 ml
300085010€10.491 l = €104.90
TS-10 French Blue Gloss is a spray paint for plastic models that brings a strong blue tone and a glossy surface finish to visible parts. The 100 ml can suits painting sessions where broad, even colour coverage matters, whether the focus is a body shell, a fairing or exterior trim on a scale build. This TS series paint is identified in the safety data as a special acrylic resin spray with pigments and solvents in a pressurised aerosol can. The spray format helps lay colour across curved panels, recessed sections and longer edges in one continuous pass, which is useful when separate brush marks would interrupt the finish. The cap shows the colour family clearly for quick selection at the workbench. The can is labelled for plastic model use, keeping the application focused on model making rather than general household painting. On the bench, TS-10 French Blue Gloss fits finishing work where a bright solid colour defines the look of the build, from race-inspired bodywork to accent panels on display models. The compact 100 ml size also makes it easy to keep several shades in a paint setup for different liveries, touch-up work or matching smaller detail sections to the main exterior colour. Warning! Not suitable for children under 14 years.
TS spray colours
TS-102 Cobalt Green Gloss, spray paint, 100 ml
300085102€11.491 l = €114.90
TS-102 Cobalt Green Gloss brings a bold, glossy colour coat to model finishing with a 100 ml spray can sized for practical workshop use. The cobalt green tone gives shells, panels and formed parts a clear solid colour that reads strongly under light, whether the aim is a full exterior coat or a focused accent on selected sections. The aerosol format is designed for spray application, which helps distribute paint evenly across shaped surfaces and recessed contours that are harder to cover with a brush. The gloss finish changes how the colour presents on the model, reflecting light across curves, edges and moulded lines for a cleaner finished appearance. This paint sits within the TS range used for model work, making it relevant for body shells, exterior parts and custom colour layouts where a single defined shade is needed. The 100 ml content also gives useful capacity for repeated passes across larger areas during a painting session. On the bench, TS-102 suits projects that need a saturated green statement, from full-body colour schemes to trim sections that break up a multi-tone design. It can also serve repaint work on replacement parts or fresh finishing on new builds where a gloss cobalt green tone is central to the final visual plan.
TS spray colours
TS-20 Metallic Green, spray paint, 100 ml
300085020€10.491 l = €104.90
TS-20 Metallic Green brings a vivid green tone to plastic model surfaces with the speed and reach of an aerosol spray. The semi gloss finish gives body panels, fairings and formed parts a coloured coat that reads clearly on curves, edges and larger sections. This TS paint is supplied in a 100 ml can and is intended for model finishing rather than brush application on small areas. The aerosol format helps cover broad exterior sections in fewer passes than hand painting, which is useful on car bodies, cowlings and other shaped components. The paint belongs to the TS spray range shown as a special acrylic resin spray in the supplied documentation. For a different final sheen, TS-13 glossy clear coat can be applied over TS-20 to create a glossier surface finish while retaining the underlying Metallic Green colour. On the bench, TS-20 suits coordinated colour work across multiple matching parts that need the same tone and surface character. It also fits repainting sessions where a single green shade needs to carry across a full shell, separate panels or replacement components for a consistent finished appearance. Warning! Not suitable for children under 14 years.
TS spray colours
TS-54 Light Metallic Blue, spray paint, 100 ml
300085054€10.491 l = €104.90
TS-54 Light Metallic Blue brings metallic colour and spray application together in a 100 ml can made for model finishing. The semi gloss tone gives plastic surfaces a blue finish with a reflective character that catches light across curved bodywork, spoilers and shaped detail parts. This special acrylic resin spray is supplied as an aerosol, so colour reaches broad panels, recesses and edges in a continuous coat rather than in separate brush strokes. The Light Metallic Blue shade suits full body shells as well as accent sections where a cooler metallic tone is needed. The can format supports quick, consistent coverage on model components that benefit from an even painted surface. BasicText also names TS-13 glossy clear coat as the matching option when a higher-gloss final appearance is wanted over this colour layer. On the bench, TS-54 fits painting sessions for car bodies, fairings, exterior panels and other plastic model parts that need a uniform metallic finish. It also works well when several matching sections need the same shade, keeping colour continuity across separate components in one build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-57 Blue Violet Gloss, spray paint, 100 ml
300085057€10.491 l = €104.90
TS-57 Blue Violet Gloss brings a vivid coated finish to plastic model work with a spray format that covers broad surfaces quickly and evenly. The 100 ml can suits body sections, exterior panels and shaped parts where a uniform gloss colour helps the finished build read cleanly under light. This special acrylic resin spray contains pigments, binders and solvents in a pressurised aerosol, so the paint is delivered as a fine mist rather than by brush contact. That application method helps reach contours, edges and recessed areas on model parts with a more continuous coat across the surface. The Blue Violet Gloss shade adds a saturated colour note that stands out on display builds, custom liveries and detail-focused finishing projects. The can is labelled for plastics, making it a direct match for many model kit components used in hobby assembly and finishing. During painting sessions, light coats support controlled colour build-up on shells, panels and trim pieces. Use in well ventilated areas and keep the aerosol away from heat, sparks and open flames, as the can is extremely flammable and pressurised. Warning! Not suitable for children under 14 years.
TS spray colours
TS-58 Pearl Light Blue Gloss, spray paint, 100 ml
300085058€10.491 l = €104.90
TS-58 Pearl Light Blue Gloss brings a bright pearl tone and a reflective gloss surface to plastic model finishing in a 100 ml aerosol can. The spray format helps lay colour across larger body panels, curved shells and shaped exterior parts with a more continuous coat than hand painting can usually achieve on the same surfaces. This special acrylic resin spray is intended for model use on plastic parts, where an even outer layer and a clean visual finish matter to the final look. Pearl Light Blue Gloss adds both colour and sheen, making it useful for full body coverage as well as selected accent areas that need a lighter metallic character. The aerosol can supports broad, sweeping passes over prepared surfaces, which is especially useful on contours, edges and recessed sections that can show brush marks more easily. The 100 ml volume also gives enough paint for more than a single small section, depending on the size of the model and the coverage style used. On the bench, TS-58 fits naturally into body finishing, exterior detailing and repaint work on plastic model kits. Used in light coats on clean parts, it supports a smoother visual result on car bodies, fairings, panels and other formed components where colour consistency is part of the finished presentation. Warning! Not suitable for children under 14 years.
TS spray colours
TS-60 Pearl Green Gloss, spray paint, 100 ml
300085060€10.491 l = €104.90
TS-60 Pearl Green Gloss is a 100 ml spray paint for plastic model work, combining a pearl green color tone with a gloss finish that catches light across shaped surfaces. The aerosol format makes it suited to broad exterior areas such as bodyshells, fairings and larger panels where an even visual result matters. This TS series paint is identified in the data as a special acrylic resin spray, placing it within hobby finishing workflows for scale models and similar builds. The can is labeled for plastics, so it fits projects where molded parts need a consistent color layer without brush marks across wider sections. Pearl finishes change character as light moves over edges, curves and recesses, which gives sculpted forms more visual separation than a flat color alone. The 100 ml fill also makes the can practical for single larger bodies or several smaller painted sections, depending on the size of the build. On the bench, TS-60 suits custom color schemes, replacement body finishing and detail-led repainting where a glossy green surface is part of the final look. It can be used to unify separate plastic components under one color direction or to create standout accent areas on racing, road or fantasy subjects. Warning! Not suitable for children under 14 years.
TS spray colours
TS-67 IJN Grey Flat Sasebo Arsenal Spray Paint
300085067€12.291 l = €122.90
TS-67 IJN Grey Flat Sasebo Arsenal is a 100 ml spray paint for model building that lays down a flat grey coat across larger surfaces with the speed and reach of an aerosol can. The synthetic lacquer formula cures in a short time, which helps keep painting sessions moving when a body shell, hull or other broad section needs full colour coverage. The paint is intended for large model surfaces rather than small brush details, and the aerosol format supports an even pass across wide panels. One can contains enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a useful coverage reference before a project starts. After the main sprayed coat has dried, enamel and acrylic paints can be used to pick out smaller details on top. That sequence makes it easier to separate broad base colour work from later trim, markings or panel accents. On the workbench, TS-67 suits builds that call for a subdued arsenal grey with a flat finish instead of shine. It fits painting stages where a complete exterior coat comes first and finer colour work follows after, keeping the main surface treatment and the detail stage clearly separated. Warning! Not suitable for children under 14 years.
TS spray colours
TS-70 Olive Drab Flat, paint spray, 100 ml
300085070€10.491 l = €104.90
TS-70 Olive Drab Flat is a 100 ml paint spray for model work that combines fast-curing synthetic lacquer with broad, even coverage on larger surfaces. The aerosol format helps lay down a uniform olive drab flat coat across body shells, panels and other wide sections where brush marks would interrupt the finish. The paint is intended for model surfaces and is especially useful when a build needs one consistent base colour before smaller accents are added. Its synthetic lacquer formula dries in a short time, which keeps painting stages moving and helps the next finishing steps follow sooner. The flat olive drab tone suits military, utility and scale subjects that call for a muted, non-gloss appearance. A single can contains 100 ml of paint, and that volume is enough to fully cover 2 or 3 car model bodies in 1/24 scale. Once the main coat is in place and dry, enamel and acrylic paints can be applied for detail work, trim lines and smaller picked-out sections. This makes the spray a strong fit for model benches where larger body parts need quick, even colour before hand-painted finishing begins. It also supports projects that combine a sprayed base coat with later brush-painted details, keeping the main surface and the fine accents in separate, workable stages. Warning! Not suitable for children under 14 years.
TS spray colours
TS-78 Field Grey 2 Flat, paint spray, 100 ml
300085078€12.291 l = €122.90
TS-78 Field Grey 2 Flat is a 100 ml paint spray made for model work where broad surfaces need a fast, even coat. The synthetic lacquer formula cures in a short time, so body shells, panels and other larger sections can move on to the next finishing step without a long wait at the bench. The aerosol format is especially useful when a brush would leave visible stroke patterns across wide areas. Field Grey 2 Flat gives a muted, non-gloss finish that suits military subjects and other builds that call for a restrained colour tone. The can is sized to cover about 2 to 3 car bodies in 1/24 scale, which makes it suitable for a complete body coat and repeat work on related parts. The paint layer also supports mixed finishing methods, because enamel and acrylic paints can be applied afterwards for smaller accents and picked-out details. On a scale car body, the spray can handle the main exterior colour before window frames, trim lines or small parts are finished by hand. On military models or display pieces, it works well for larger hull, body or equipment sections where a flat surface and consistent tone matter across the whole build. Warning! Not suitable for children under 14 years.
TS spray colours
TS-80 Flat Clear, paint spray, 100 ml lacquer
300085080€11.491 l = €114.90
TS-80 Flat Clear is a 100 ml spray lacquer for model finishing, designed to cover larger surfaces quickly and leave a flat final look over glossy paint finishes. The aerosol format suits broad body panels and shell sections where an even coat matters, and the synthetic lacquer cures in a short period of time to keep paint work progressing between stages. This spray is part of the TS paint range and is intended for model use where a smooth clear coat is needed across full surfaces rather than small brush-painted areas. One can is enough to fully cover 2 or 3 car model bodies in 1/24 scale, which gives a useful guide when planning a full shell finish or multiple smaller projects. The formula is not affected by acrylic or enamel paints, so once the main painted assembly is complete, further detail work can be added with those paint types. For clear coating, the underlying paint should be fully cured before TS-80 is applied; the guidance given is up to 1 week to avoid cracking caused by different cure rates. Clear coating over decals should also be tested first, as some decals can be harmed by the coat. On the bench, TS-80 suits full-body finishing, panel-by-panel top coating and final surface adjustment when a glossy base needs a flatter appearance. In model car work, it gives a straightforward way to unify the finish across larger exterior areas before smaller painted details are picked out separately. Warning! Not suitable for children under 14 years.
TS spray colours
TS-85 Bri. Mica Red Gloss F60, paint spray
300085085€11.491 l = €114.90
TS-85 Bri. Mica Red Gloss F60 is a synthetic lacquer spray made for coating large model surfaces with a smooth, even color layer. The 100 ml aerosol format suits broad body sections where brush painting would leave a slower, more segmented finish, and the bright mica red gloss tone gives car bodies a vivid, polished look. The formula cures in a short time, which helps keep painting work moving between base coating and later detail stages. Tamiya states that the spray paint is not affected by acrylic or enamel paints, so trim lines, small accents and picked-out parts can be added after the main color coat with those paint types. A single can provides enough paint to fully cover 2 or 3 car model bodies in 1:24 scale, giving a useful reference point for planning stock and project size. As an aerosol paint, it is supplied in a pressurized can and should be used with the handling care appropriate to that format. On the bench, TS-85 fits projects that need fast coverage across curved shells, fenders and roof sections before smaller details are finished by hand. It also works well in multi-stage paint routines where the main body color goes on first and secondary accents follow once the lacquer coat has cured. Warning! Not suitable for children under 14 years.
TS spray colours
TS-92 Metallic Orange Spray Paint, 100 ml Can
300085092€11.491 l = €114.90
TS-92 Metallic Orange spray paint brings bright metallic colour to larger model surfaces with the convenience of an aerosol can and the fast curing behaviour of synthetic acrylic lacquer. The 100 ml can is sized for broad coverage, making it well suited to full body shells and other sections where an even coat matters. The paint is formulated as a synthetic acrylic lacquer that cures in a short period of time, which helps keep multi-step finishing work moving. One can provides enough paint to fully cover 2 or 3 plastic model car bodies in 1/24 scale, giving a useful planning guide before a painting session starts. The metallic orange finish adds a reflective, vivid look that stands out on body lines, curves and larger panels. The formula is not affected by acrylic or enamel paints. It may also be applied over a cured spray painted surface, which supports layered paint schemes and follow-up colour work. At the workbench, the can suits broad passes across car bodies, body panels and similar model parts where brush painting would take longer to level out. For repainting, touch-up sessions or full colour changes on compatible model surfaces, TS-92 keeps the process focused on coverage, colour depth and a clean sprayed finish. Warning! Not suitable for children under 14 years.
TS spray colours
TS-99 IJN Gray, paint spray, flat 100 ml
300085099€12.991 l = €129.90
TS-99 IJN Gray brings a specific Japanese Navy color reference into a 100 ml paint spray that is easy to apply on model surfaces. The flat finish keeps the final look muted rather than glossy, which suits military and naval subjects where a service-style appearance matters across larger painted sections. This TS paint spray is identified as the Maizuru arsenal shade of IJN Gray, giving the color a defined historical reference instead of a broad general gray. The aerosol format supports fast application on hull panels, deck structures and other broad areas where brush marks can interrupt the finish. The can contains 100 ml, a practical volume for repeated passes across larger assemblies or for keeping one consistent tone across multiple matching sections. The paint belongs to the TS spray range and is intended for model use. On the workbench, TS-99 fits builds that need a flat naval gray for ships, military subjects or other projects calling for this exact named tone. It also works well when separate sections need to be painted in the same color family, helping keep the overall finish visually consistent from one stage of the build to the next. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Master E, weathering set, 3 colors
300087098€13.291 kg = €1,582.14
Weathering Master E brings 3 weathering shades into a compact palette for model building work, with yellow, grey and green arranged for quick access during finishing. The solid mixture of pigments with additives supports controlled application on raised detail, edges and recessed areas, where gradual buildup matters more than heavy coverage. The set is identified for creating weathering traces in model building and comes in a case with an included dual-ended applicator. One end uses a sponge tip for broader transfer, while the small brush supports tighter placement and lighter blending on smaller sections. This format suits bench work where several tones need to stay visible at once instead of being opened one by one. The palette style also helps keep color choice consistent across repeated passes on the same surface. Used on vehicle panels, machinery details or other scale subjects, the 3-color layout supports faded areas, grime variation and selective tonal contrast. During finishing sessions, the compact case can sit beside paints and tools while the applicator moves between broader shading and smaller touch points. Batteries are not required. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Stick Snow, finishing tool for models
300087082€6.191 kg = €2,476.00
Weathering Stick Snow brings a direct, hands-on way to add winter wear and cold-surface detail to model builds. The solid pigment in stick form is made for model weathering, so snow traces, pale deposits and frosted accents can be placed exactly on the areas that need a lighter finish, whether along body edges, around panel lines or across scenic groundwork. The pen-style format gives the tool a familiar grip, while the cap protects the usable end between sessions. Unlike loose materials that need separate brushes or mixing, this applicator is worked straight onto the surface, which helps keep small touch-ups focused on corners, ridges and other raised sections. The Snow shade suits vehicles, figures and diorama scenes where a crisp white effect helps define cold conditions, settled residue or seasonal terrain detail. The safety data identifies the material as a mixture of binders and pigments with additives, and it is dispersible in water at 20 °C. On a workbench, it fits naturally into the finishing stage after painting, when tracks, wheel arches, boots, rocks or roadside scenery need a final cold-weather note. For diorama scenes, the white tone can break up darker earth colours and add contrast to surfaces that would otherwise read flat under display lighting. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-3 Royal Blue Gloss, acrylic paint, 23 ml
300081003€5.491 l = €238.70
X-3 Royal Blue Gloss brings a strong blue tone and a glossy finish to plastic model building, with 23 ml of X-Acrylic paint for detailed colour work on selected sections, trim and shaped surfaces. The liquid format suits careful finishing sessions at the bench, where small parts and defined panel areas benefit from steady brush control. The paint belongs to the X-Acrylic range and is identified as X-3 Royal Blue Gloss, making it easy to match within an established colour system for model projects. The safety data names it as a glossy special acrylic resin paint for plastic model building, with binders, pigments and solvents in the mixture. The listed density is 1.0 g/ml at 23 °C, and the flash point is 31 to 33 °C. The boiling range is 80 to 120 °C, and the solvent content is stated as 50 to 60%. These technical details place it clearly in the category of liquid hobby paint for workshop-style use. On a model bench, 23 ml offers enough paint for repeated detail work across multiple sections, whether the goal is a bright body accent, a blue trim line or a glossy colour block on a plastic assembly. The compact jar format also fits neatly into paint racks, drawers or tool caddies used for organised model finishing.
XY acrylic colours
XF-11 Flat Japanese Navy Green, acrylic paint
300081311€5.491 l = €238.70
XF-11 Flat Japanese Navy Green brings a defined military colour to scale finishing work, with a flat surface that keeps reflections low and lets painted forms read with a more subdued look. The 23 ml jar gives a usable bench format for repeated application on model sections that need a consistent Japanese Navy Green tone. As an acrylic paint, XF-11 fits neatly into finishing routines that call for controlled colour placement and clean coverage on scale subjects. The flat character makes it useful where gloss would distract from panel definition, weathering layers or the visual balance of historically styled builds. The shade itself is the key feature here: Japanese Navy Green supports projects that rely on a specific service colour rather than a generic green. The jar format also keeps the paint ready for small-area corrections, edge work and follow-up coats during longer painting sessions. On the workbench, XF-11 suits aircraft, ship and military model sections where a muted finish helps surface detail stay visible under display lighting. It also works well for touch-up passes after masking, detail correction or colour matching across separate assemblies in the same build.
XY acrylic colours
XF-14 Flat Japanese Army Grey, acrylic paint
300081314€5.491 l = €238.70
XF-14 Flat Japanese Army Grey is an acrylic brush paint in a 23 ml jar, set up for model finishing with a matt grey tone drawn from Japanese Army colour references. The flat surface helps keep the look subdued on military subjects, where a low-sheen finish suits panels, equipment parts and small exterior details. The safety data identifies the paint as a liquid with an alcohol odour and a density of about 1.2 g/mL at 23 °C. It lists a flash point of 33 °C and classifies the mixture with H226, H319, H332 and H336. The same document states that use belongs in well-ventilated areas, with protective gloves and eye or face protection. For storage, the container should be kept tightly closed in a cool, ventilated place and away from heat, sparks and open flames. On the workbench, the 23 ml volume suits regular detail painting, small-area coverage and colour continuity across several stages of a build. The grey shade can be used for base sections, equipment parts or careful touch-up work where a matt military finish is needed. This paint is intended for modelling use and should be handled with the precautions stated on the label.
XY acrylic colours
XF-14 Flat Japanese Army Grey, acrylic paint
300081714€3.591 l = €359.00
XF-14 Flat Japanese Army Grey is an acrylic hobby paint in a 10 ml jar, created for scale model finishing with a flat, non-gloss surface. The muted grey tone suits military subjects, equipment details and weathered sections where a reflective sheen would look out of place. The safety data identifies this paint as a liquid with an alcohol odour and a density of about 1.2 g/mL at 23 °C. Its flash point is 33 °C, and the label carries flammable and warning hazard pictograms. The documented use is brush paint, which makes the shade suitable for controlled work on smaller areas, edge sections and detail parts that need a consistent matte appearance. The XF designation also helps place the colour clearly within an established hobby paint system when planning repeat use across several builds. On the workbench, the 10 ml size fits touch-up jobs, single-colour detail passes and compact paint storage. Japanese Army Grey can be used where a subdued military finish is needed on body sections, accessories or scene elements, and the flat surface helps the colour sit naturally alongside weathering and other non-gloss tones.
XY acrylic colours
XF-28 Dark Copper Flat, acrylic paint, 10 ml
300081728€3.791 l = €379.00
XF-28 Dark Copper Flat brings a muted copper tone to scale finishing work, with a flat surface effect that keeps metallic colour restrained rather than glossy. The 10 ml jar suits detail painting sessions where small parts, trim pieces and mechanical accents need controlled colour placement. The acrylic paint format makes XF-28 a practical choice for model benches built around careful brushwork and measured colour changes. Dark copper can be used to break up larger paint schemes with a warmer metal note on exhaust surrounds, fittings or industrial-style components. The flat finish helps the colour sit naturally on surfaces that call for an aged, worked or non-polished look. In the safety data, the mixture is identified as liquid paint with a copper colour and an approximate density of 1.2 g/mL at 23 °C. The same document lists a flash point of 33 °C, so handling and storage should follow the labelled precautions. On military, automotive, sci-fi or diorama subjects, this shade can pick out selected areas without overpowering the main body colour. It also fits repainting jobs where a single metallic accent is needed to restore contrast on previously finished sections.
XY acrylic colours
XF-51 Flat Khaki Drab, acrylic paint, 10 ml
300081751€3.591 l = €359.00
XF-51 Flat Khaki Drab brings a muted military-style tone to scale finishing work, with a flat surface effect that keeps reflections low on painted sections. The 10 ml jar size suits focused bench use, whether covering smaller components, refining edges or adding colour to selected body areas on a model. The acrylic paint format supports controlled application where neat placement matters, especially on panel details, accessories and narrow parts that benefit from a steady hand. Flat Khaki Drab works well where a subdued field colour is needed rather than a glossy surface, helping equipment, vehicle parts and scenic elements read with a more restrained look. The XF-51 designation also makes the shade easy to identify within an existing paint collection when a build calls for this exact colour. The compact jar stores efficiently alongside other modelling supplies and keeps a dedicated tone ready for repeat use across separate projects. On the workbench, this paint suits careful touch-up sessions, detail passes after main assembly, or colour planning for military and utility subjects. It also fits longer build cycles where a specific flat shade is needed again later for matching parts, accessories or small corrections.
XY acrylic colours
XF-64 Flat Red-Brown, acrylic paint, 23 ml
300081364€5.491 l = €238.70
XF-64 Flat Red-Brown brings a muted, earthy shade to model finishing, with a flat surface that keeps painted sections restrained rather than reflective. The 23 ml jar gives a practical amount for repeated use across detail work, larger colour blocks and follow-up corrections during a build. This acrylic paint suits controlled application on model parts where a red-brown tone adds depth, contrast or a weathered look. The shade works well for military subjects, structural details, interior sections and scenic elements that call for a subdued brown with a red cast. On smaller components, the flat finish helps preserve crisp visual separation between adjacent colours instead of adding shine that can blur the effect. The colour code XF-64 also makes it easier to return to the same shade when matching earlier work on later stages of a project. On the bench, the jar format keeps the paint ready for measured use during detail painting, touch-ups and staged finishing sessions. It fits hobby workflows where several subassemblies are painted separately, then brought together with consistent colour across the completed model.
XY acrylic colours
XF-67 Flat NATO Green, acrylic paint, 10 ml
300081767€3.591 l = €359.00
XF-67 Flat NATO Green is an acrylic paint for model finishing, supplied in a 10 ml jar and specified here in the XF range as shade 67. The flat colour effect suits painted surfaces that call for a muted, non-gloss look, whether the work focuses on a full body section, smaller details or careful touch-up areas. Within a model workspace, a defined shade such as Flat NATO Green helps keep colour choices consistent across separate stages of a build. The 10 ml content fits controlled application on parts that need measured coverage rather than large-volume use, and the acrylic formulation places this paint in a finishing category widely used for scale modelling tasks. The designation XF-67 also makes the colour easy to identify when matching later additions or returning to an unfinished project. This paint suits builders working on military subjects, scenery elements or accessories that call for a subdued green tone. It also works well when a project needs the same shade repeated across separate components, helping painted sections read as part of one coherent model finish.
XY acrylic colours
XF-87 IJN Flat Gray, acrylic paint, 10 ml
300081787€3.791 l = €379.00
XF-87 IJN Flat Gray is an acrylic paint for model finishing, supplied in a 10 ml jar and matched to the IJN Flat Gray Maizuru A. shade reference. The flat surface keeps reflections low, so panel lines, edges and weathering effects remain visually consistent when a build calls for a restrained gray tone. The acrylic formula suits careful brushwork on smaller sections where controlled placement matters more than broad coverage. A 10 ml volume fits neatly into a bench setup, stays easy to sort with other colour jars and supports repeat use across touch-ups, subassemblies and detail passes. The shade name gives a clear point of reference when a project needs continuity across separate stages or matching parts finished at different times. The jar format also makes it practical to open only the colour needed for a specific step instead of handling a larger paint container. On ship models, aircraft details or military subjects, this gray tone can be used for selective repainting, small fittings or complete sections that need a flat, even appearance. During longer finishing sessions, the compact jar size helps keep colour changes efficient while leaving space on the work surface for tools, parts and masking materials.
XY acrylic colours
XF-91 IJN Gray Yoko.A.flat, acrylic paint
300081791€3.791 l = €379.00
XF-91 IJN Gray Yoko.A.flat is an acrylic paint for scale modelling work, supplied in a 10 ml jar for controlled use on smaller sections, detail areas and careful colour application. The flat finish gives the shade a muted surface appearance that suits military-style subjects where a non-gloss look is part of the final effect. The IJN Gray Yoko.A. colour designation makes this paint a focused choice for builders working on compatible naval themes and historically influenced finishing schemes. The compact jar size helps with measured dispensing at the bench, whether the task is brush painting raised details, refining edges or correcting a previously painted section. As an acrylic paint, it fits neatly into hobby workflows that call for precise handling on parts with fine contours and narrow surface breaks. On a workbench, XF-91 can be used for selective coverage on superstructures, hull sections or smaller accessories that need a consistent flat grey tone. It also suits touch-up work during later finishing stages, when a specific colour match and a restrained surface sheen help keep the overall model appearance coherent.
Brushes & accessories
HG II Flat Brush Extra Small, modeling brush
300087213soon available again
The HG II Flat Brush Extra Small brings a precise flat profile and very fine PBT resin bristles to detailed model painting, giving smooth, soft brushstrokes on small parts and tight edges. Its extra small format suits careful paint placement where a broader brush would cover too much at once. The flat tip supports controlled coverage on miniature panels, trim lines and other narrow sections, while the fine bristle texture helps the paint flow evenly across the contact area. The handle is made from solvent-resistant material, a practical match for repeated use around hobby paints and related liquids. Laser-engraved text on the grip reads TAMIYA MODELING BRUSH HG II, with the size marked in Japanese, so the brush remains easy to sort and identify in a bench setup with multiple tools. At the end of the grip, a stopper reduces rolling on the table and helps prevent the bristles from being knocked against the work surface. On a painting bench, this brush fits tasks such as coating small raised details, defining edges and working into compact sections of a scale model. If a cleaner cylindrical handle shape is preferred, the end stopper can be cut off using side cutters.
Primers
Surface Primer L, spray primer, gray 180 ml
300087042soon available again
Surface Primer L is a gray spray primer for model finishing work, supplied in a 180 ml aerosol can for broad, even coverage on prepared parts. The formula is specified for plastic and metal, making it useful where a build combines different materials and needs one consistent base before painting. The gray coat helps small imperfections stand out during prep, so seams, sanding marks and filled spots can be checked before colour is applied. On larger body sections, the aerosol format supports fast coverage with a steady spray pattern, while smaller parts can be coated to bring their surface texture into view before the next stage. Used as an undercoat, it helps unify the appearance of mixed components and gives later paint layers a more consistent starting point. The can is labeled for air spray use and carries a net content of 180 ml. This primer suits model workshops where body parts, detail pieces or metal components need the same visual base before painting. It also fits repair and refinishing tasks when an existing surface needs to be reworked, checked and prepared for a fresh topcoat. Warning! Not suitable for children under 14 years.
Lacquer colours
LP-9 Clear Gloss, Paint, 10 ml Bottle
300082109soon available again
LP-9 Clear Gloss is a clear paint from the LP range, supplied in a 10 ml bottle for controlled use on model surfaces and finishing work. The transparent formula is intended for gloss effects, adding a shiny coat that changes the surface appearance without covering the underlying colour. Within a painted build, a clear gloss layer can be used where a smooth reflective finish is needed on selected sections or across broader painted areas. The 10 ml content suits measured application at the workbench, especially for touch-ups, trim sections and other parts that benefit from a neat, even coat. As a clear finish rather than a colour coat, LP-9 focuses on surface sheen and final presentation. The compact bottle format also fits easily into a paint rack or tool drawer with other modelling supplies. This paint works well during the final stages of a model project, when body panels, accessories or detail areas need a glossier surface. It also suits careful refinishing sessions, where a small amount of clear coat is enough to refresh visible sections and complete a clean, polished look.
Brushes and accessories
15 Well Palette, paint mixing tray, 5 plates
300087125soon available again
The 15 Well Palette is a practical paint mixing tray for model work, built around 15 separate wells that keep colours apart while brush painting, detail finishing or preparing small batches for repeated use. Each plate combines 9 round wells with a 25 mm diameter and additional compartments in a 3 mm thick PET sheet, creating a tidy layout that stays easy to handle on a crowded workbench. The disposable format changes the rhythm of a painting session by removing the cleanup routine that comes with metal palettes. Instead of reaching for thinner after every colour change, a used plate can simply be set aside and replaced. When a smaller section is enough, the plate can be cut with scissors, which helps place only the needed wells beside a model, subassembly or test piece. That makes the tray useful for touch-ups, trim colours, weathering mixes and other jobs where only a limited amount of paint is needed at one time. The palette can also be cleaned with Tamiya paint thinner when a mix needs to remain available across a longer session, although Tamiya Airbrush Cleaner 87089 is excluded from that use. On the bench beside brushes, stirrers and paint jars, the plate supports a more orderly workflow with less interruption between mixing, loading the brush and returning to fine detail work. Warning! Not suitable for children under 14 years.
AS spray colours
AS-24 Flat Dark Green, paint spray, 100 ml
300086524soon available again
AS-24 Flat Dark Green brings a muted military-style finish to model painting work, with a spray format that lays colour across larger sections in a smooth, continuous pass. The 100 ml can suits bench setups where even coverage and a consistent tone matter on aircraft surfaces and other scale parts. The shade is identified as German Air, making it a clear match for historically styled aviation schemes where a flat surface is needed instead of a reflective sheen. As part of the AS paint spray range, it is shaped around model finishing rather than general household use, which keeps the focus on scale colour application and clean visual results. The aerosol format helps reach broad panels, wings, fuselage sections and similar shapes with fewer visible stroke lines than hand brushing. A single can also keeps the same colour reference available for follow-up coats, corrections and later detail work on matching sections. On the workbench, AS-24 fits naturally into painting sessions that move from primed parts to final colour coats. It also works well for restoring worn areas on an existing build, where the same flat dark green tone is needed to keep the overall finish visually consistent.
Lacquer colours
LP-1 Black Gloss, paint, 10 ml bottle
300082101soon available again
LP-1 Black Gloss is a brush paint for model work, supplied in a 10 ml bottle and formulated as a liquid coating for small parts, trim sections and careful touch-up jobs. The black gloss colour creates a reflective finish that gives panels, details and accent areas a crisp visual contrast when applied with controlled brush strokes. The compact 10 ml size suits benches where several colours are kept close at hand, and it keeps the amount manageable for focused paint sessions on selected components rather than broad coverage. As a liquid paint, LP-1 can be guided into corners, along raised lines and around moulded detail where a brush needs direct control. The gloss surface works especially well on parts that benefit from a darker, cleaner highlight, such as frames, housings or fine exterior details. The LP designation also makes the shade easy to identify again when a build returns to the bench for later corrections or added sections. On a scale model, this paint fits naturally into finishing stages where small areas need a defined black tone and a smooth sheen. It also suits maintenance work on previously painted builds, where chips, edges or added components call for the same colour reference in a compact bottle.
Lacquer colours
LP-58 NATO Green Flat 10 ml Paint Jar
300082158soon available again
LP-58 Flat NATO Green brings a muted military colour into scale modelling with a flat finish that keeps surfaces subdued rather than reflective. The 10 ml jar size suits focused paint sessions on body sections, accessories and smaller detail areas where measured colour use matters. This lacquer paint is identified in the LP range as shade 58 and is presented here as NATO Green Flat, making it a clear match for projects that call for military tones and low-sheen surface treatment. The colour can be used to define equipment panels, exterior sections and accent areas that need a restrained green rather than a glossy coat. The jar format keeps the paint compact on the workbench and easy to store alongside other finishing colours in the same series. In practical use, LP-58 works well when a build needs a consistent flat green across several separate parts or when a finished model calls for small corrections after the main coat is complete. It also suits builders who plan colour layouts in advance and want a clearly coded shade ready for camouflage-inspired schemes, touch-up work and detail painting.
Lacquer colours
LP-71 Champagne Gold, lacquer paint, gloss 10 ml
300082171soon available again
LP-71 Champagne Gold brings a gloss metallic finish to model painting, with a warm tone that sits between bright gold and silver for trim, accent panels and other small visual details on scale builds. Formulated as a lacquer paint for plastics, it is intended for model surfaces where a clean, reflective colour layer helps individual parts stand out. The paint comes in a 10 ml jar, a practical size for detail-focused work, selective colour placement and later touch-ups on the same build. Its lacquer formulation is based on binders and pigments in solvents, and the safety data identifies it as a flammable liquid with a flash point of -3 °C. The same data also states that the paint can cause serious eye damage and may cause drowsiness or dizziness, so handling belongs in well-ventilated work areas with suitable eye protection. The jar format also makes it easier to return to small finishing steps such as edging, picked-out moulded details or metallic contrast sections. On the bench, LP-71 Champagne Gold suits builders working through body detailing, accessory painting or final visual corrections after the main colour coats are complete. It also fits projects that need a restrained metallic note rather than a stronger yellow gold, especially on plastic parts that benefit from precise brush or tool-led application.
Primers
Metal Primer 40ml, bottled primer for metal
300087204soon available again
This bottled Metal Primer is made for treating metallic parts before painting, laying down a clear undercoat that helps paint adhere more reliably and reduces the risk of peeling once the finish has dried. The 40 ml bottle format gives close control over where the primer goes, which is especially useful on smaller model components and detailed metal sections. The formula is suitable for metal parts such as photo-etched components, where a stable base layer matters before colour is applied. Unlike the earlier spray-can format, this version is supplied in a glass bottle and can be used for brush work as well as airbrush preparation, making it easier to handle individual parts away from larger spray setups. The clear liquid focuses on surface preparation rather than visible colour change, so the following paint layer remains the visual finish. The bottle shown includes an internal brush stem for direct application to selected areas. On the workbench, it fits neatly into paint prep stages for scale models, detail upgrades and separate assemblies that combine metal with other materials. The primer can be applied before painting trim, fittings or etched details, helping the final coat stay in place through handling during the build.
PS spray colours
PS-10 Purple, polycarbonate spray paint, 100 ml
300086010soon available again
PS-10 Purple brings a bold purple finish to polycarbonate bodyshell projects, using an aerosol format that supports smooth, even coverage on clear model surfaces. The 100 ml can fits naturally into RC body painting sessions, whether a fresh shell is being coated from the inside or an existing design is being refreshed. The formula is specified for polycarbonate, which matters when a model body needs paint matched to that material rather than a general-purpose spray. The can label identifies it as a Color for Polycarbonate spray, and the purple cap gives quick visual confirmation of the shade before spraying starts. As an aerospray, it applies directly from the can and suits controlled passes across curved panels, roof sections and side areas on model bodyshells. The visible usage guidance on the can indicates application in even coats, with the spray directed from about 25 to 30 cm. On the workbench, PS-10 Purple fits naturally alongside masking, trimming and decal planning for RC car body finishing. It suits builders who want a distinct single-colour look or a strong base tone within a more detailed livery, while the compact can size stores easily with other modelling supplies after the painting session. Warning! Not suitable for children under 14 years.
PS spray colours
PS-20 Flourescent Red, spray paint, polycarbonate
300086020soon available again
PS-20 Flourescent Red brings a vivid finish to polycarbonate model shells in a spray format matched to shaped hobby parts. The 100 ml aerosol can lays colour onto curved surfaces, making it suited to RC bodyshell work where roofs, fenders and side panels need consistent coverage. The paint is identified as being for polycarbonate, which matters when a formed shell flexes during handling and fitting. The can is marked Tamiya Color and PS-20, so the shade is easy to match when a build calls for this exact fluorescent red. Spray application also helps reach moulded lines, tight corners and raised body contours that are awkward to cover evenly with a brush. The compact can size fits naturally into a model bench setup alongside masking and finishing supplies. In use, the aerosol suits painting sessions focused on RC car bodies, replacement shells and other compatible formed parts. The warning symbols on the can indicate flammable contents and careful handling, so this is a workshop paint intended for adult modelers during dedicated finishing work. Warning! Not suitable for children under 14 years.
PS spray colours
PS-24 Flourescent Orange, spray paint, 100 ml
300086024soon available again
PS-24 Flourescent Orange is a 100 ml spray paint developed for polycarbonate model surfaces, bringing a vivid fluorescent finish to RC bodyshell projects and other compatible hobby builds. The aerosol can format keeps application direct and workshop-ready, with the colour delivered in broad passes that suit sweeping rooflines, arches and side panels. This paint is identified as part of the PS range for polycarbonate, making it a focused choice for builders working with clear racing shells and formed body parts rather than general craft coatings. The fluorescent orange tone gives strong visual contrast on fast body shapes, where bright colour blocks, striping layouts and track-inspired liveries need to read clearly across curved surfaces. The can carries 100 ml net volume, a practical size for single-shell work, touch-up sessions or adding accent sections to a larger finishing plan. On the bench, PS-24 fits naturally into body painting stages such as base colour work, layered graphics and custom race styling. In RC model use, the bright orange finish helps body lines stay visible during running, photography and display, while the spray format keeps the process centred on the shell instead of separate paint-mixing equipment. Warning! Not suitable for children under 14 years.
PS spray colours
PS-29 Fluorescent Pink, spray paint, 100 ml
300086029soon available again
PS-29 Fluorescent Pink brings a bold colour accent to polycarbonate model work in a 100 ml spray can sized for hobby painting sessions. The aerosol format lays colour onto curved shell sections, roof panels and body lines in a way that suits RC bodyshell finishing and custom visual themes. The formula is specified for polycarbonate, which makes it relevant for clear racing shells and other compatible model parts rather than general craft surfaces. Fluorescent Pink gives liveries, contrast sections and standout details a bright visual presence, especially where a build calls for strong colour separation. The can format also helps keep application consistent across wider panels compared with brush painting on large shell areas. As an aerosol paint, PS-29 should be handled with the stated precautions appropriate to this type of material. This paint suits fresh bodyshell projects, colour changes on existing shells and detailed finishing work on hobby models that use polycarbonate components. In workshop use, the 100 ml volume fits neatly into paint planning for single-shell coverage, accent sections or matching follow-up coats within a custom RC build. Warning! Not suitable for children under 14 years.
Polish, cleaners, aging materials
Weathering Stick Sand, model finishing stick
300087086soon available again
Weathering Stick Sand brings direct, pen-style finishing to scale models and diorama work. The solid applicator tip twists up from the barrel and transfers colour by rubbing it straight onto the surface, giving controlled placement on edges, recesses and textured areas where dusty wear is meant to collect. The Sand tone is intended for model building weathering effects and suits dry deposits, pale earth traces and sun-worn surface variation. The cosmetic-style format keeps the material in a compact stick instead of a loose medium, which helps when working around small parts and narrow sections. The uncapped tip allows the colour to be drawn across raised detail or pressed into selected spots, then built up gradually where a stronger effect is needed. This makes it useful for armour, aircraft, cars, structures and scenic groundwork that benefit from a dry, light-toned finish. On a tank hull, the shade can pick out dust on lower panels and corners. On a roadside diorama or building section, it can add dry soil notes and faded handling marks that break up a flat painted surface with a more lived-in look. Warning! Not suitable for children under 14 years.
XY acrylic colours
X-22 Clear Gloss, acrylic paint, 10 ml
300081522soon available again
X-22 Clear Gloss is an acrylic paint for plastic model building, supplied in a 10 ml jar for detailed finishing work. The clear gloss coat gives painted surfaces a smooth reflective look, so body panels, trim and decal areas catch light with a cleaner, sharper appearance during display or close-up inspection. The X-Acrylic resin formula is identified in the safety data as a glossy brush paint and is supplied as a liquid mixture of binders, pigments and solvents. Physical data lists a density of 1.0 g/ml, a flash point of 31 to 33 °C and a boiling range of 80 to 120 °C. Solvent content is stated as 50 to 60%, and the mixture is described as partly soluble in water. These details place X-22 in the finishing stage of model work, where a clear coat is used to seal selected areas, adjust surface sheen or prepare parts for further detail treatment. On the bench, the 10 ml size suits small batches and controlled application on canopies, body shells, fairings or accent sections that need a glossy top layer rather than a colour change. The jar format supports careful loading of a brush for edges, corners and narrow recesses. This paint is classified as a flammable liquid, category 3, and carries H226, H318 and H336 hazard statements. Use in well ventilated areas and handle with suitable eye protection.
XY acrylic colours
X-24 Clear Yellow Gloss, acrylic paint, 10 ml
300081524soon available again
X-24 Clear Yellow Gloss is an acrylic paint for plastic model building, supplied in a 10 ml jar and formulated as a transparent yellow shade with a gloss finish. The clear colour layer keeps underlying moulded detail or painted surfaces visible while adding a warm tinted effect, which suits parts such as light covers, windows, visors or other sections that call for a see-through yellow tone. Within the X-Acrylic range, this shade is positioned for detail-focused finishing rather than broad opaque coverage. The gloss surface catches light differently from a flat coat, so raised contours, panel shapes and small trim sections remain visually defined after painting. The compact jar format also makes it practical to keep several colours close at hand during a build, especially when a project moves between base coating, detail painting and final visual accents. On the workbench, X-24 fits projects that need a transparent signal colour on selected areas instead of a solid block of pigment. It can be used to refine scale vehicle lights, aircraft details or custom effects on clear parts where a yellow tint changes the look without hiding the shape beneath. Keep handling and storage aligned with the hazard information on the label.
Why choose colours, paints and airbrush systems for Tamiya model kits?
One of the best things about model making is the ability to create your own designs. No matter what colour combination or pattern you have in mind, the colours, paints and airbrush systems for Tamiya model kits allow you to realise your own ideas to their full potential. What’s more, all products are easy to use and made from high-quality materials that provide optimal adhesion.
What should I pay attention to when using model making colours and paints?
To obtain the best possible coating, follow the steps below:
Preparation
Parts for model kits are made using injection moulding or thermoforming machines. For best results, you should “degrease” (i.e. clean) the surfaces before applying any paint. You can do this applying a primer, by sanding the surfaces, or by using special cleaners. The advantage of a primer is that it provides a better adhesive base for subsequent layers of paint. If you notice specs of dust or other particles after applying the primer, you can remove them very carefully with a fine piece of sandpaper (grit size #2000 or finer). Tamiya primers produce ultra-fine droplets, ensuring that engravings remain visible after application. This is the best way to ensure a good result, as Tamiya primers are designed for all Tamiya paint series.
Colour and type of paint
Before applying any paint, think about which colours and finish (matte or glossy) you want for your model. To avoid purchasing the wrong products, you should also decide whether to use airbrush paints, or whether to combine different types of paint. In addition, bear in mind that the type of primer you use has an effect on the paint. For example, if you want to paint your model red, then you should choose the pink primer for best results.
Drying time
Bear in mind that the drying time will vary depending on the type of paint. While the paint is drying, avoid touching freshly painted parts, applying another coating or doing anything else that may affect the new coat of paint. For best results, apply multiple thin coats to ensure a smooth surface.
Accessories
To obtain the best possible result, you’ll also need a set of tools to match your paint and airbrush products. These include fine brushes, airbrush pistols and adhesive templates.
Tamiya paints and airbrush products – overview of product range
Tamiya offers an extensive range of paints, airbrush colours and accessories for decorating your models. The following section provides an overview of the various product categories:
Primers
A premium primer provides the optimal foundation for subsequent coats of paint, as it smooths out any bumps and uneven surfaces and improves the adhesion of the paint. In our shop, you will find an extensive selection of primers for plastic (ABS/PS), metal ceramic and wooden components.
TS spray colours
Tamiya’s TS spray colours are acrylic-based paints that are ideally suited to spraying plastic and RC models (e.g. truck models and functional models) and only require a short drying time.
PS spray colours
PS spray colours are designed for painting polycarbonate chassis (transparent, painted from the inside), and are resistant to both oil and fuel.
AS spray colours
Tamiya’s AS spray paints were specially developed for painting model aircraft and allow you to create subtle shades and precise details.
XF acrylic colours
Tamiya’s acrylic paints are made from water-soluble acrylic resin and can be applied with a brush or airbrush pistol. XF acrylic paints have a matte finish, while X acrylic paints retain a glossy effect after drying.
Diorama texture colours
Our diorama texture colours can be used to create textured surfaces (e.g. for grainy sand, rough concrete, powdery snow or lush grass). The paints can also be mixed with Tamiya XF paints to obtain a different colour.
Lacquer colours
Made from artificial resin, Tamiya’s lacquer paints have a very fast drying time, are highly scratch-resistant, and can be applied with an airbrush pistol.
Polish, cleaners and ageing materials
Our shop also sells a range of polishes, cleaners and ageing materials, including polishes for different finishes, special cleaning utensils, and pens and powdery colours for creating a realistic weathered look.
Brushes and accessories
Under brushes and accessories, you will find an extension selection of premium brushes for applying paints and lacquers, as well as practical accessories such as mixing palettes and pipette sets.
Airbrush systems
If you’re interested in working with airbrush systems, take a look at the Airbrush section of our online store, where you will find a selection of airbrush pistols, attachments, holders and air control valves.
Colours, paints and airbrush systems – paint your models in stunning colours
With Tamiya’s extensive range of colours, paints and airbrush systems, you can customize your model with your very own designs. Be creative and make your colour dreams come true with Tamiya paints and airbrush systems!