Tamiya Product Range

Model car kits 1:24

1:24 Porsche 911 GT3 RS (992)

€45.99

Assembly model kit 1/24 scale, length: 190mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC 2 WD Holiday Buggy 2010 DT-02

Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 The Holiday Buggy was one of Tamiya’s classic R/C car kits from the 1970’s. It is available as a re-release assembly kit. The classic body comes mounted on the DT-02 chassis which has its battery pack loaded in the center of the bathtub frame providing excellent handling performance even on rough surfaces. The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control. Note: When installing a regular sized 540 motor, the following parts are required: 17T Pinion Gear (part# 3515005) 3mm Grub Screw (part# 50576) Motor Plate (part# 4305125)   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger.Barrel & Jerry Can

€8.69

Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Carbon Decal Twill EF

€8.19

Article number: 300012682 Product: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/extra fine, 130x 190mm sheet size, instructions.

On-road RC cars (2WD/4WD)

1:10 RC Ford Mustang GT4 (TT-02)

€154.99

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

Model car kits 1:24

1:24 Nissan R390 GT1

Article number: 300024192 Product: 1/24 Nissan R390 GT1 About the Nissan R390 GT1 One of the most prestigious and grueling racing events held in the world is the "Le Mans 24 Hour Endurance Race". It has brought excitement and pleasure to motorsports enthusiasts worldwide, ever since it was first held in 1923. In 1997 Nissan Motor Co., Ltd. Entered their latest Nissan R390 GT1 which was developed to vie for this renowned racing event. The R390 GT1 took its name from a car, R380, that excited Japanese motor sports enthusiasts over thirty years ago. Jointly developed by Nissan and TWR (Tom Walkinshaw Racing), the R390 GT1 is the state of the art racing expertise of them. Aerodynamically refined low and sleek body styling is suggestive of Nissan's highly competitive Gr. C machines raced during the 1980's. The 3.5 liter V8 engine, producing an awesome 600 horsepower output, is bolted directly to the carbon composite monocoque and works as a load-carrying element. The tremendous power is delivered to the rear wheels via a transversely mounted, six speed transmission. The four wheel double wishbone suspension system is connected to the horizontally mounted shock absorbers via pushrods and bell cranks to provide optimum road handling performance. Three R390 GT1's were entered in to the 1997 Le Mans event and, among them, the car No. 21 achieved a pole position in the pre-qualifying race. Although the overall result was rather discouraging, the R390's outstanding performance, displayed during the early stage of the race, was something to behold and promising for the year to come.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche Turbo 1988 Roadversion

€35.99

Article number: 300024279 Product: 1/24 Porsche Turbo 1988 Streetversion Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbos impressive design and performance made it the most well known member of the 911 series. About the Porsche 911 Turbo The 911 Turbo debuted in 1975 as Porsches first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbos distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

€45.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.   Warning! Not suitable for children under 14 years.

RC trucks

Tamiya RC Volvo Bundle

Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Ford GT

Article number: 300024346 Product: 1/24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CBR 1000-RR-R Fireblade SP

€52.99

Article number: 300014138 Product: 1:12 Honda CBR 1000-RR-R Fireblade SP The Complete Package Announced in 2019, the CBR1000RR-R FIREBLADE SP is a stunning triumph of motorcycle design with a highly circuit-oriented feel, yet providing an accessible ride to road-going owners. There is plenty of race technology borrowed from the RC213V MotoGP bike, a class-leading 217.5hp engine, and state of the art electronics that assist with many aspects of the bike including its suspension. It is adorned with aerodynamic honed cowls, highlighted by triple interior fairing winglets in the side cowls. The Honda works Team HRC is planning to enter the 2020 SBK championship using a bike based upon this masterpiece. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 176mm, width: 68mm, height: 96mm. ★The aerodynamically honed form of the bike is captured in style, including renderings of the internal winglets in the side cowls. ★Features a detailed depiction of the class leading liquid cooled 4-cylinder engine. ★Has screw-attached headlight. ★Side and under cowl can be removed after completion of assembly. ★Metal plated parts are used for mirror surfaces. ★Tires have realistic texture and tread patterns. ★Comes with two marking options, masking stickers and a racing stand. Kit model, scale 1:12, Street Version, engine, frame, fairing, racing motorcycle stand, semi-slick tires, exhaust system, instructions, decal, Length 176mm. Suitable Front fork Set 300012690.

RC trucks

1:14 RC USTruck Globe Liner Cab Over Kit

€484.99

Article number: 300056304 Product: 1/14 RC US Truck Globe Liner Cab Over BS Tamiya has captured the attractive appearance of tractor trucks in a 1/14 scale electric powered "Globe Liner". The rear double axle drive uses rigid propeller shafts for smooth performance. Globe Liner   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Castrol Toyota Tom´s Supra GT

€26.99

Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Volkswagen Beetle 1300 1966

€27.99

Article number: 300024136 Product: 1:24 Volkswagen Beetle 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come. Volkswagen 1300 Beetle   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 BW Flak-Panzer Gepard (1)

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger.Mortar-Troop (4)

€9.79

Article number: 300035193 Product: 1:35 Fig.-Set Ger.Mortar-Troop (4) During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling "fire!" The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit. Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Figure-Set US Army Infant. (4)

€5.49

Article number: 300035013 Product: 1:35 Figure-Set US Army Infant. (4) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in Western Europe after the Normandy Landings in June 1944. ★Their subjects are captured in realistic pose: lobbing a grenade, cocking firearms and holding a flamethrower. ★Three of the figures are depicted in standard cloth legwear, and one in leather.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. IV Ausf. D (3)

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. StuG III Ausf. G Finland 1942

€43.99

Article number: 300035310 Product: 1/35 WWII StuG III Ausf. G Finland 1942   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Jap. Mitsu. J2M3 Interceptor Raiden

€16.99

Article number: 300061018 Product: 1:48 Jap. Mitsu. J2M3 Interceptor Raiden The J2M Raiden (Allied reporting name "Jack") was developed by the Japanese Navy in WWII as a land-based interceptor. It began to reach units from September 1944 and they were used to intercept B-29 bombers which were attacking Japan. This kit accurately depicts the J2M3 variant and allows modellers to assemble either deployed or retracted landing gear. Parts for a drop tank and two pilot figures, as well as three marking options, including a 302nd Kokutai aircraft, are included. Raiden (Jack)   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Lotus Super 7 Series II

€29.99

Article number: 300024357 Product: 1/24 Lotus Super 7 Series II The Super 7 is a legendary kit car that has spawned legions of fans since its release in 1957, and lives on today, manufactured by Caterham. Lotus developed and sold Seven cars first, however, and the souped up Super 7 version of the car was powered by a 4-cylinder 1.3-liter Ford Cosworth engine, achieving a top speed of over 160km/h. Simple yet effective designs such as rack and pinon steering and drum brakes made its assembly accessible to the home constructor. • This is a 1/24 scale plastic model assembly kit. Length: 139mm, width: 61mm. • The familiar, cosy form of the car is recreated in detail. • Features a realistic recreation of the Ford Cosworth engine under the opening hood. • Decals have been redesigned for this model, and also included are a new choice of seatbelt stickers. • C Parts are now molded in white for easier painting. • Choose whether to assemble as a road car, or a Clubman racer (with dedicated racing screens and roll bar). • Features a new instruction manual with updated 4-language cover story.

Military figures & Accessories 1:35

1/35 German Tank Crew Set

€19.99

Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi 90 quattro Racing Lac.TT-02

€179.99

This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Body prepainted in White (PS-1) with Smoke (PS-31) windows Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger,) 4WD kit model, TT-02 chassis, electronic speed controller, 540 torque-tuned motor, pre-painted polycarbonate.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€184.99

  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Plasma Edge II TT-02B 4WD

€149.99

Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3 R (992)

€169.99

Tamiya is proud to announce the release of the Porsche 911 GT3 R (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. Based upon the Porsche 911 GT3 (released as our 1/10 R/C kits – Items 58712 and 47496), in July 2022, the Porsche 911 GT3 R (992) was announced as a car which was developed to conform to GT3 regulations. With a horizontally opposed 6-cylinder engine capable of 565ps, this car features lightweight body (only about 1,250kg) with carbon fiber, and flourished at global races such as NLS (Nürburgring Langstrecken Serie) 2024 and 2024 Fanatec GT World Challenge Asia Powered by AWS. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Super Avante (TD4) 4WD

€349.99

  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition

€27.99

Article number: 300014142 Product: 1:12 Honda Dax 125 TAMIYA Edition Tamiya is proud to announce the release of the Honda Dax125 Tamiya Limited Edition as a new addition to our 1/12 Motorcycle Series. (The first generation Dax in 1969 was recreated by Item 16002.) Following on from the popular Monkey (Z-series) bikes, the Honda minibike Dax was announced in 1969. The Dax had a distinctive T-bone frame crafted in pressed steel which housed the fuel tank, and centrifugal clutch engine. It was designed to be ridden by anyone, anywhere, and its charming, distinctive form was loved all around the world. Although its Japanese sales finished in 1981, the Dax returned in 1995 with a similar design to the original. In 2022, Honda announced the Dax125 which inherits the established Dax identity, incorporating elements such as the T-bone frame, a long bench seat, a chrome upswept muffler and more. It can be ridden both on city streets and the open road. Owners can choose between the rich tone of pearl nebula red and understated yet elegant pearl cadet gray for the body. This Dax125 has a limited edition: the Dax 125 Tamiya Limited Edition - the idea of official Honda dealer Cub House in Thailand - which was announced at the 2023 Bangkok International Motor Show. It employs a sumptuous metallic blue body adorned with Tamiya twin star logos plus some checkered flag motifs to get the pulse racing. With dedicated stickers for the muffler heat guard and wheel rims, this version features a horn cover with Dachshund emblem, dedicated serial number for each of these limited edition bikes, and dedicated helmet with Tamiya logo. It certainly fascinated motorcycle fans - whether that be full size or in miniature scale – across the globe. Assembly kit, 1/12th scale, Length: 147mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-RR #55 2006

€56.99

Article number: 300014109 Product: 1/12 Kawasaki Ninja ZX-RR #55 2006 The Ninja ZX-RR was Kawasaki's first MotoGP machine equipped with a 4-stroke engine, and after overcoming initial teething problems, began to show its potential. With the addition of rider Shinya Nakano in 2004, the team kept improving and became capable of challenging the top teams for race honors. Nakano rode the lime-green, 990cc-engined machine to a second place podium finish at Round 8 in the Netherlands for his best finish of the 2006 MotoGP season. Features: Cowlings can be attached/detached using precison-made screws to showcase accurately reproduced internal details. Rear suspension feature realistic nut fastener. Wrench tool is conveniently included to aid assembly. Brilliant livery can be recreated using Tamiya paints (Light Green & Semi Gloss Black), with sponsor logos provided by beautiful Cartograf decals. Synthetic rubber racing slick tires with Bridgestone markings provide an authentic race feel. Markings for both Shinya Nakano's No.56 and Randy de Puniet's No.17 included   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 Road Star 1999

€43.49

Article number: 300014080 Product: 1:12 Yamaha XV1600 Road Star 1999 About the Yamaha XV1600 Road Star Yamaha shocked the motorcycle world once again when it brought out the XV1600 Road Star, a unique combination of traditional cruiser design with state of the art technology. The construction of the machine is focused on providing the maximum amount of comfort, performance and style to today's large capacity cruiser customer. The XV1600 is powered by a huge 1,600cc air-cooled V-twin pushrod engine housed in an ultra-long and low chassis. This OHV engine pumps out 46.3kW (62.6PS) at 4,000rpm and features an electric starter. The front suspension of this machine consists of telescopic forks, while the rear consists of a swinging arm monocross. This gorgeous motorcycle was voted "1999 Cruiser Bike of the Year" by Cruising Rider Magazine. About the model - Tamiya has recreated the Road Star in stunning detail as their latest addition to the 1/12 Motorcycle Series. - Overall length: 208mm, overall width 89mm, overall height: 100mm. - Enjoy the fascinating assembly incorporating real screws and two kinds of metal plated parts. The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece. - Kit comes with two kinds of tank emblems (one for the Japanese and American "Road Star" and one for the "Wild Star" as it is called in Europe. - Various decals for stripes and meters are also included in this authentic kit. - Transparent display stand also included.   Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Seat Belt Set A

€7.19

Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. Kitmodel, Scale 1:20, 6-Point- Racing Seatbelt, Logosheet, Photo- etchedparts, Manual, Decal.

Model car kits 1:24

1:24 Subaru BRZ (TD8)

€41.99

Model car kits 1:24

1:24 Subaru Impreza WRC '99

€27.99

Article number: 300024218 Product: 1:24 Subaru Impreza WRC '99 The 1997 World Rally Championships saw a relaxing in the rules pertaining to vehicle modification. Subaru was the first team to take advantage of the leeway, bringing out the Impreza WRC. That machine featured all aluminum horizontal four cylinder turbo engine paired with a vertically mounted gearbox. The layout placed the gearbox in a balanced position behind the front axle, heightening manerverability and ultimately contributing to a Mnufactures Championship for that year. The bulk of the improvements to the 1999 model centered around the engine and gearbox. Foremost was the adoption of an electronically controlled throttle system. This system converts the position of the throttle in to electronic signals, heightening throttle response. The Impreza WRC was also equipped with a 6-speed, semi-automatic gearbox. This system enables sudden shifting, such as from 6th to 1st gear. Work is also continuing on the development of an electronically controlled damper system. The Impreza WRC is driven by J. Kankkunen, R. Burns and B. Thiry. Kankkunen and Burns finished in 1st and 2nd place respectively at both the 7th Argentina Rally and the 10th Finland Rally. The 8th Acropolis Rally was also taken by Burns, setting the scene for an intense contest in the latter half of the season.

Model car kits 1:24

1:24 Toyota GR Supra Custom

€38.99

300024371 1:24 Toyota GR Supra Custom Assembly model kit 1/24 scale, length: 183mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 Bo.F-15E Strike Eagle Bunker Buster

€149.99

Article number: 300060312 Product: 1:32 Bo.F-15E Strike Eagle Bunker Buster About the Boeing F-15E Strike Eagle w/"Bunker Buster" The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes. About the model The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air-to-air missiles. 1/32 scale, total length 600, total width 404mm. Faithfully recreates intrepid form of Strike Eagle. Main parts such as fuselage and wings are to be fastened with screws.Radar unit/nose side-access panel, and Vulcan Cannon hatch can all be opened and closed after assembly. Canopy and air brakes can be assembled in either the up or down positions. Cockpit, radar, and Vulcan Cannon are all recreated down to the finest details. Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Allied Vehicle Access.

€11.99

Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US/Dt.Jerry Can Set

€5.49

Article number: 300035026 Product: Gear bag 58618 Mt.Beetle This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. ★Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. ★Includes nine each of U.S. and German type jerry cans, plus three each of new and dented barrels.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Dt. PzKpfw. I Ausf. B (1)

€31.49

Article number: 300035388 Product: 1:35 Dt. PzKpfw. I Ausf. B (1) Tamiya is proud to welcome the German Tank Panzerkampfwagen I Ausf. B into our 1/35 Military Miniature Series, which means that the main German tanks of WWII are all in our line-up now. Although Germany had been forbidden to develop tanks after the defeat of WWI, it developed the Panzerkampfwagen I under the name of "agricultural tractor" to deflect suspicions of rearmament, and the Pz.Kpfw.I became a massproduced tank. The engine on the Ausf.B was upgraded to 100hp, nearly double the 57hp of the Ausf.A. Also, it had a 40cm longer hull, and a pair of 7.92mm MG13 machine guns were equipped. While the Pz.Kpfw.I was developed for training, it first saw live action in Spain during the Spanish Civil War, and was widely used in various situations such as the invasion of Poland and the Eastern Front. 1/35th scale, assembly kit, Model of the German Tank Panzerkampfwagen I Ausf.B, tools, paints and glue required   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set US Infantry Assault (6)

€11.79

Article number: 300035192 Product: 1:35 Fig-Set US Infantry Assault (6) This plastic assembly model set features six (two noncommissioned officers & four infantrymen) U.S. WWII soldiers in a variety of dynamic in-battle poses. ★These figures are depicted wearing authentic M1941 and M1943 field jackets and canvas leggings. ★The tense situation of battle can be clearly seen through the expressions of the models such as the noncommissioned officers giving instructions to their men who are waiting for the order to attack. ★Weapons such as the M1 Garand rifles and Thompson submachine gun have a sharp realistic finish.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. MG Team (5) Mid.WWII

€16.79

1/35th scale, assembly kit, 5 Figures   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set US Infant. W-Europe (8)

€7.19

Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Marder III M Normandy

€48.99

Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.

Military model vehicles 1:35

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

€17.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Sd.Kfz.2 Kettenkrad (Mid.Pro.)

€27.49

Military model vehicles 1:35

1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)

€43.99

Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.

Military model vehicles 1:35

1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

€33.99

Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig.-Set Ger. Assault Tro. (8)

€7.19

Article number: 300035030 Product: 1:35 WWII figure set German. infantry (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII SdKfz.223 Light Arm.Vehicle(2)

€25.99

Article number: 300035268 Product: 1/35 WWII SdKfz.223 Light Arm.Vehicle(2) Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Photo- etched parts, Length 140 mm.   Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 US Schlacht. BB-63 Missouri ('91)

€124.99

Article number: 300078029 Product: 1:350 US Schlacht. BB-63 Missouri ('91) The Iowa-class ships were the last major battleships in the US Navy. The most famous one was and is the BB-63 Missouri. 212,000 horsepower enabled the heavily armed colossus to reach a top speed of 33 knots. The main armament consisted of nine 16 inch (40.6 cm) guns distributed in three triple turrets (2 fore and 1 aft) with a maximum range of up to 40 km. The ships of the Iowa class were 270.4 m long and had a relatively narrow hull of a maximum of 33 m, so they could easily pass the Panama Canal. The USS Missouri entered service in 1944 and participated in numerous operations in the Pacific War. On September 2, 1945, the Treaty of Unconditional Surrender of the Japanese Armed Forces was signed aboard the USS Missouri. With the outbreak of the Korean War in June 1950, the USS Missouri and her sister ships were used for fire support and relegated to reserve service in 1955. In 1986 the ship was completely renovated, modernized and equipped with the latest weapon technology. The Missouri was used one last time in the Gulf War and in 1993, after almost 50 years in service, she took her well-deserved retirement. Included: construction kit, instructions manual, decor

Model car kits 1:24

1:6/1:12/1:24 Cable 0.5mm OD Bla 2m

€4.49

Article number: 300012675 Product: 1:6/1:12/1:24 Cable 0.5mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,50mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Other model kits

Chasmosaurus Diorama

€21.99

Article number: 300060101 Product: Chasmosaurus Diorama Length: (Adult) 168mm, (Young) 68mm. This assembly kit model recreates the herbivorous dinosaur Chasmosaurus, which lived in what is now North America during the Cretaceous period about 75 to 80 million years ago. Its shape and texture of its skin was reproduced based on the latest available research. Two different front left and rear right legs are included to enable different poses. The adult and young Chamosaurs may be conveniently displayed on the included diorama base and the set also comes with a same-scale human figure for size comparison.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Lexus LS400

€34.99

Assembly model kit 1/24 scale, Shaped V8 Motor, removable front Hood   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Skyline GT-R V-Spec R33

€25.49

Model car kits 1:24

Peugeot 206 WRC

€29.99

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1/12 Kawasaki Ninja H2R

€58.99

Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1/12 Repsol Honda RC213V '14

€57.99

Article number: 300014130 Product: 1/12 Repsol Honda RC213V '14 This model depicts the RC213V run by the factory-works Repsol Honda team in 2014 MotoGP. It was a momentous season for the team and for young sensation Marc Marquez. Marquez's 2014 season was sublime as he absolutely dominated with 13 wins and contributed to the Riders', Constructors' and Team Championships. The RC213V debuted in 2012 with new engine size regulations stipulating a maximum of 1,000cc. It features an aluminum double-tube frame and powerful 1,000cc Honda 4-stroke V4 with pneumatic valve system. The seamless transmission saves valuable power during shifts, while other hi-tech features include traction control, an anti-wheelie system, and engine braking control.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Ger. Panther Ausf.D

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1/35 Panther D P-E Grille Set

€6.79

Military model vehicles 1:48

1/48 JGSDF Type 16 MCV

€31.99

Article number: 300032596 Product: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse (MB-01)

€164.99

Article number: 300058721 Product: 1:10 RC 1000 TCR Berlina Corse (MB-01) Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Citroen 2CV Charleston (M-05)

€144.99

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

RC buggys (2WD/4WD)

1:10 RC Hotshot II Blockhead Motors

€269.99

Article number: 300058710 Product: 1:10 RC Hotshot II Blockhead Motors Tamiya welcomes back Item 58062 1/10 R/C Hotshot II - originally released in 1987 - with a twist! The Hotshot II is one of the earliest 4WD buggy models and this had not been re-released until today. Following Item 58695 (1/10 R/C Wild One Off-Roader Blockhead Motors), this is the second model of our Jun Watanabe R/C buggy re-releases. This model is the 4WD buggy based on Item 58062, and the sticker is designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS'' which deals in stickers and apparel, and customizations of Tamiya off road buggy models from the 1980s, also taking part in the design of collaborative fashion, music, and skateboard projects to expand the horizons of R/C cars. Included: 4WD Kit, Blockhead Design, 540er Motor, Electric ESC, pre-painted Body, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Monte-Carlo 99 (TT-02)

€164.99

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Monster Beetle (2015)

€234.99

Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure. Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche Carrera RSR 2.8 La.BT-01

€199.99

The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. The Body is Pre-Painted in PS-1 White and PS-31 Smoke (Windows). 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polyacarbonate body prepainted, Manual.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Racing Fighter (DT-03) The Real

€96.99

Article number: 300058628 Product: 1:10 RC Racing Fighter (DT-03) The Real Say hello to the new model on Tamiya's easy-to-assemble, rough and tumble DT-03 buggy chassis! It features a brand new polycarbonate body design with attractive, boxy lines and a stylish rear wing. Customers outside of Japan will be delighted to hear that the export version of this kit exclusively features a torque-tuned motor and CVA oil dampers. About the Model • This is a 1/10 scale R/C model assembly kit. • Features a stylish new body molded in durable and lightweight polycarbonate. Brand new stickers are included to decorate the model. • The DT-03 uses a tough monocoque frame. Big wheelbase (288mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance off-road! • Front arms are at a 25-degree angle for great off-road driving. Dampers are high-performance CVA oil shocks. • A torque-tuned motor is included in the export version ONLY. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Lightweight kit with detailed and illustrated assembly instructions, motor, controller Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TA08 PRO Chassis Kit

€349.99

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 ST185

Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota LC 40 Yel Painted CC-02

€274.99

Article number: 300047490 Product: 1:10 RC Toyota LC 40 Yel Painted CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 40 as our new R/C model on the cross country CC-02 chassis. The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. The long-selling Land Cruiser 40 series was sold from 1960 to 1984, and employed front / rear rigid axles with leaf springs, and durable ladder frame. This R/C model assembly kit recreates the 1972 Land Cruiser FJ40V which is one of the most popular cars in that series. Pre-Painted Body. 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, pre-painted Polycarbonat Body, Type 540 Motor, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:100 Space Shuttle Atlantis

€66.99

Article number: 300060402 Product: 1/100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 916 Desmo. 1993

€35.99

Article number: 300014068 Product: 1:12 Ducati 916 Desmo. 1993 About the Ducati 916 Ducati, the renowned Italian motorcycle manufacturer, is highly regarded by motorcycle enthusiasts the world over. Their current top-of-the-line "916" bike was unveiled to the public during the 1993 Milan Motor Show. In recent years, Ducati has been a dominant force at the World Superbike Championships. Their 916 was developed using the latest racing technology and expertise, and became a very effective base machine fore these Championships. Its 114 horsepower, 916cc, liquid cooled L-twin cylinder engine uses a computer controlled fuel injection system and Ducat's traditional Desmodromic valve operation system. This valve system uses cam mechanics for both opening and closing the valves, while a conventional system closes the valves with springs only. This powerful engine is mounted in a light weight and extremely rigid, chrome molybdenum steel tubular frame. The rear swing arm suspension uses a mono-arm for quick tire changing during competition. Showa's shock absorbers and Brembo brake calipers are used at both ends. The 916 has a 2-stage adjustable caster offset system. Its aerodynamic cowl design is very distinctive, differing from other racer-replica bikes. The front cowl has engine air intake openings and mounts the dual headlamps. The fuel tank is ergonomically sculptured to fit the rider's varying posture during hard riding. The 916 is a true street legal racing machine on the leading edge of performance and styling.     Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC US Fuel Tank Trailer 2Axle Galat

€454.99

Article number: 300056333 Product: 1/14 US Fuel Tank Trailer 2Axle "Gallant Eagle" The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303.   Warning! Not suitable for children under 14 years.

RC tanks

1:16 RC Leopard 2 A7V w/Option Kit

€1,149.99

The Leopard 2A7V is one of the most modern battle tanks in the world and is used in numerous countries. The V stands for "improved" or, more accurately in German "verbessert". The improvements compared to the previous version are considerable: Better visibility through the use of modern optics and camera systems. More firepower through the revision of the 120mm cannon. The communication system has been improved and the Battle Management System (BMS) is used. The chassis has also been reinforced with an additional protection module and additional armor on the front protects the tank better against armor-piercing ammunition. The original weighs an impressive 63.9 tons and is powered by a 1500 hp engine. TAMIYA has now made this tank into a remote-controlled version in 1/16 scale. Here, too, the electronics have been completely redeveloped and the model redesigned compared to its predecessor, the 56020 2A6. The result is a real highlight: Both in terms of detail and the functions, it sets standards in this area. All functions can be controlled via the DMD T-12, such as driving functions, turret rotation, light functions, sounds and also the combination of sound, movement and light when firing a cannon, for example. Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Honda NSX : Acura NSX

€51.99

Article number: 300024344 Product: 1:24 Honda NSX : Acura NSX The 2015 Detroit Auto Show was the stage for a momentous announcement for super sports car fans (and particularly those of the legendary NSX), with the first glimpse of the production version of the long-awaited second generation NSX (NC1). This hi-tech modern car was designed under the lead of Acura, and employs the Super Handling-All Wheel Drive (SH-AWD) hybrid system deploying 3 electric motors in tandem with the 3.5-liter V6. One of the motors is between the engine and the 9-speed dual clutch transmission, while the other two act upon one of the front wheels each, to provide exacting cornering. The car also has four distinct drive modes that provide performance tailored to the conditions. The body and space frame are extremely lightweight, using aluminum and high strength steel extensively. The whole assembly process is taken care of in a brand new Honda manufacturing facility in Ohio, U.S.A. About the Model • This is a 1/24 scale plastic model assembly kit. • Length: 187mm, width: 92mm, height: 51mm. • The model recreates the dynamic NSX form, which was penned with aerodynamics and cooling in mind. • It employs the same frame as the real car, with authentic rendering suspension. • The V6 engine is recreated with impressive detail. • Features a realistic depiction of the cockpit interior with excellent detail such as door interior panels. • Includes decals and stickers to recreate markings, plus window masking stickers. • Metal transfers are used to capture mirror surfaces and emblems. • Contains parts to assemble left- and right-hand drive versions, plus Acura and Honda cars.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mercedes Benz SL300 Gullwing

€60.99

Article number: 300024338 Product: 1:24 Mercedes Benz SL300 Gullwing The Mercedes-Benz 300SL joins the 1/24 Sports Car Series as it is considered an all-time classic in the automotive world. The real car began life as a prototype for the German motor giant’s works racing team, taking part in international races, and in 1954 a production version debuted at the International Motor Show in New York. Despite nominal road car status the 300SL was still a very racy vehicle and proved popular, particularly in the United States. It possessed a 3-liter engine (hence the 300 in its name), and a highly lightweight body (SL stands for Sport Leicht, lit. "light sports") with striking gull wing doors. 1,400 cars were produced by the end of its production run in May 1957. The Tamiya model kit captures the real life subject down to the working Gull-Wing doors and complex tubular space frame. Productdetails: - This is a 1/24 Scale plastic model assembly kit. - The elegant form of this classic is breathtakingly captured by the model, and includes opening engine hood and gull wing doors. The doors can be locked in open position using a small strut. - Opening the hood reveals the faithful depiction of the engine. Hood can also be locked in open position. - The complex tubular space frame – one of the signature points of the car – is elegant recreated. - Nylon mesh is included to recreate the front air intake - Numerous metal-plated parts recreate side bars, bumpers and more. - Comes with masking stickers for use when painting the model. - Metal transfers are included in the kit to depict mirror surfaces and emblems. - Features newly-designed tire parts.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mitsubishi Lancer Evolution VI

€31.49

Article number: 300024213 Product: 1/24 Mitsubishi Lancer Evolution VI ★This is a plastic model assembly kit depicting the car which formed the base for Mitsubishi's 1999 rally challenge. ★From the front bumper designed to boost cooling, to the 2-step rear wing, the form of the car is captured in style. ★Features recreation of the radiator visible through the nylon mesh front grille. ★Choose whether to attach front fog lamps. ★Realistic depictions of suspension and interior.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911 GT1 LeMans `96 Factory

€35.99

Article number: 300024186 Product: 1/24 Porsche 911 GT1 LeMans `96 Factory ★This is a plastic model assembly kit depicting the car which competed in the 1996 running of the 24 Hours of Le Mans. ★The low, side form of the car is recreated in style, with depictions of the midship twin turbo engine and suspension. ★Features a realistic interior with roll cage, plus a removable rear cowl component. ★Decals are included to recreate the livery.

Model car kits 1:24

1:24 Porsche 959

€25.49

Article number: 300024065 Product: 1/24 Porsche 959 The Porsche 959 was first unveiled at the 1983 Frankfurt auto show as a study for a full time 4 wheel drive Group B super sports car. Back then, the automobile was still far from being completed and its potential a mystery. The 959's awesome capabilities matured through thorough research and competition experience with the automobile. It demonstrated its outstanding abilities during the grueling Paris-Dakar Rally, and the Le Mans 24 hour endurance race. Porsche has taken their race car technology and put it into the 959, to produce a car that provides every comfort, with smooth running and the low interior noise expected of a road car, while offering high safety reserves. Thus the 959, despite its massive 450hp engine power, can be drive easily at its lower RPM ranges. The 2848cc engine is a descendent of the famous 956 and 962 Porsche Group C racer. It is an air/liquid cooled, flat 6 cylinder, DOHC equipped with two turbochargers, providing a top speed of more than 300km/h. The 959 maintains superb acceleration under all driving conditions, yet it also achieves short braking distances that prove to be a reassuring factor for all classes of drivers. The hollow wheel spokes increase air volume to the brakes and accommodate the fat, low profile Dunlop Denloc tires, and is equipped with a pressure sensor to detect punctures. The Porsche 959 is the car that raised the standard of sports car thinking to a new plateau, by exceeding every known yardstick of handling and performance.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota GT-One TS-020 LeMans ´99

€38.99

Article number: 300024222 Product: 1/24 Toyota GT-One TS-020 LeMans ´99 About the Toyota GT-One TS020 "The Longest Day in France", also known as the 24 Hours of Le Mans endurance race, takes place two hundred kilometers southwest of Paris, in the city of Le Mans. This high-speed circuit is made up of public roads closed off for the race, which stretch to 13.6 kilometers in length-the world's longest circuit track. Throughout the long history of the Le Mans, two or three major manufacturers have always fought for the top honors, but the 1999 race boasted six major contenders. The Toyota GT-One TS020 led the grueling 24 hour event right up until one hour before the finish, when it was struck with an untimely tire blowout, but still managed to finish second. Subtle refinements to the sleek carbon fiber composite body of the GT-One TS020 were conducted in the pursuit of optimal aerodynamics. The 3600cc V8 twin turbo R36V engine also underwent various modifications, improving power, torque, and fuel efficiency. About the Model • 1/24 scale plastic assembly model kit based on the GT-One TS020 of the 1999 Le Mans. • Overall length: 202mm, overall width: 84mm. • This model boasts faithful recreation of innovative aerodynamics. • Highly detailed nose and diffuser-just like the full size car. • Rear cowl is removable, allowing modeler to view the detailed V8 twin turbo engine even after completion. • Kit includes decals for Car no. 1 and 3. • Masking seals are also included for accurate body painting.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 US Vought F4U-1D Corsair

€165.00

Article number: 300060327 Product: 1:32 US Vought F4U-1D Corsair This is the D variant of the popular Corsair World War II fighter plane. It uses new parts to recreate features specific to the F4U-1D, which was the first Corsair to be cleared for use on aircraft carriers. This fighter-bomber could carry drop tanks on new hard points under the wing root, and up to 8 rockets under the outer wing. It provided invaluable close support for ground troops during landings in places such as the Philippines and Okinawa, and continued to serve after WWII, in Korea. F4U-1D Specific Detail differences from previous variants: 1. The semi-bubble canopy was altered during production to remove upper side frames and improve visibility. 2. Propeller blades were thicker from the root. 3. Hardpoints under the wing root allowed carrying of bombs and drop tanks. 4. The tail wheel cover had a new fairing to improve aerodynamics. 5. Outer wing sections had extended metal areas with mounts for eight rockets total. 6. Cockpit floor window was scrapped.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Bundeswehr MBT Leopard 1 (1)

€23.49

  Warning! Not suitable for children under 14 years.

Other model kits

1:35 Dino. Pteranodon

€7.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Brick Wall (22)

€5.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger. Weapons Inf.(24)

€5.29

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Motorcycle Orderly (2)

€12.99

Article number: 300035241 Product: 1:35 Diorama-Set Motorcycle Orderly (2) During WWII, the German army adopted the use of the DKW NZ350 medium sized motorcycle; it is included with this set along with a sign post and a military police officer figure who is giving directions to the rider figure with an opened map. Parts of the NZ350 including the suspension and engine area as well as separate parts to depict the side bags and exhaust are finished with rich detail. Both figures feature natural poses and realistic expressions. The road signs seen on the post from Normandy, France are printed on the box and can be easily cut out and used when recreating your diorama. Two figures included.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US Military Equipm.Mod.

€13.19

Article number: 300035266 Product: 1:35 Diorama-Set US Military Equipm.Mod. This 1/35 scale set will allow you to display the equipment seen loaded on modern U.S. military vehicles. In addition to individual equipment such as large and small Alice packs, sleeping bags, and sleeping mats, the set also includes a rich selection of 12.7mm and 40mm ammunition cases, jerry cans, and water tanks. Furthermore, the set also includes ration cartons and CIP (Combat Identification Panel) which can be attached to the U.S. Modern Utility Vehicle. This accessory set includes 25 types of equipment (total of 80 pieces) and is suitable for expanding your modern U.S. military diorama It can be used with support vehicles and frontline tanks.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set G. Sol.Field Brief.(5)

€13.99

Article number: 300035212 Product: 1:35 Fig-Set G. Sol.Field Brief.(5) This set depicts German soldiers from the middle stages of WWII in a variety of poses wearing winter uniforms and overcoats standing around a stove discussing battle strategies. ★It includes five figures depicting an officer and a noncommissioned officer looking over an open map, a soldier looking at his watch, another carrying a MG42 machine gun on his shoulder, and a squatting soldier. ★Also included in the set is a German shepherd figure lying down and accessories such as a newspaper and magazine. ★This set would go great in combination with winter-themed dioramas.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Front-Line Soldiers(5)

€11.99

Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1?   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Tank Crew Rest(6)

€10.99

Article number: 300035201 Product: 1:35 Fig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. MG Troops (7)

€7.19

Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 20mm Flakvierling 38

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

€7.19

Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Cargo Truck Krupp Protze (3)

€34.99

Article number: 300035317 Product: 1:35 Ger. Cargo Truck Krupp Protze (3) Supporting the German army's mechanized Blitzkrieg during the early stages of WWII was the 6X4 Krupp Protze light truck. Popularly known as the "boxer" due to its air-cooled flat-4 engine, this vehicle provided valuable support for the rapidly moving army by towing artillery pieces and carrying troops and supplies. It's unique sloped engine cover offered excellent forward visibility and the truck was well-liked for its reliability and ease of maintenance   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Floating Car Typ 166 (1)

€18.99

Article number: 300035224 Product: 1:35 Ger. Floating Car Typ 166 (1) This is a plastic assembly model kit of the 4WD Schwimmwagen which earned the trust of German soldiers with excellent performance on bad roads and fording ability. The body with hull-shaped underside has been reproduced via slide molding for a realistic finish and ease of assembly. The windshield is moveable and the screw can be positioned in the down position to allow you to depict a fording scene. Parts to depict the air-cooled four-cylinder engine also included. Interior details such as the flooring & seats, instrument panel, shift lever etc have a rich finish. The folded canvas roof cover also provides the model with great realism. A driver figure is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Kingtiger Ardennen Fro. (3)

€59.99

Article number: 300035252 Product: 1:35 Ger. Kingtiger Ardennen Fro. (3) Development of the massive King Tiger began in February 1943 to counter the increasing threat of Russian Tanks. A more powerful cannon was added, upgrading from the L56, 88mm of the Tiger I to the Type 43 L71, 88mm high velocity gun. The chassis front armor was 150mm thick with 80mm thick side armor. The Henschel and Porsche companies came up with rival turret prototypes. After the trial production of 50 tanks with the Porsche turret, the Henschel design, with its extremely thick armor that measured 185mm on the front and 88mm on the side panels, was adopted for mass production. The Henschel turret itself was revised mid-way through production, from a stepped gun mantle to a smooth one. Due to the havoc wreaked by the King Tiger I during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the King Tiger up until the very last day of the war. As for the DKW NZ350 military motorcycle, production began in 1940. However, this German military motorcycle experienced mid-production changes when resources became limited towards the end of the war. DKW NZ350s at that time were seen with smaller headlights and thinned-out fenders. About the Model ★Tamiya presents a 1/35 scale model of the German King Tiger as it appeared during the final German offensive in the Ardennes Forest of Belgium. ★Total length: 294mm, total width: 108mm. ★>Henschel design turret recreated in superb detail. ★Kit includes parts for two different types of gun mantles- stepped and smooth. ★Turret's rear escape hatch can be opened and closed after assembly. All other hatches can be assembled in the open or closed positions. ★Kit includes DKW NZ350 German Military Motorcycle recreated as it appeared during the latter stages of World War II with smaller headlight and thinned-out fender. ★Three figures included: Tank commander and orderly wearing leather jackets, and tank crewman.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Krupp Protze w/ 37mm PAK (4)

€39.99

Article number: 300035259 Product: 1:35 Ger. Krupp Protze w/ 37mm PAK (4) About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm Pak Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland. About the Model ★1/35 scale ★Overall length: 250mm ★Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. ★A 3.7cm Pak anti-tank gun and various accessories are part of the set. ★4 all-new figures and decals for 4 different markings are included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw.IV Aus.G w/Mot. Ea.Fr.

€49.99

Assembly kit, 1/35th scale, limited Set, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1)

€43.99

Article number: 300035170 Product: 1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1) This is a 1/35 scale plastic assembly kit of the Panther tank, which was deployed from 1943 in order to counter the formidable Russian T-34. The kit depicts a Panther Ausf.G, a variant produced from March 1944 which followed the earlier Ausf.D and Ausf.A. The long-barreled 75mm gun has been accurately reproduced and the escape hatch at the rear of the turret may be opened to view the gun breech even after completion. Other hatches on the model may be assembled in either open or closed positions. One tank crew figure and four markings options are included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger.Flak 8,8 w/Motorcycle (9)

€32.99

Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Hummel (Late Production) (3)

€60.99

Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.

Military model vehicles 1:35

1:35 US Med.MBT M48A3 Patton (2)

€27.99

Article number: 300035120 Product: 1:35 US Med.MBT M48A3 Patton (2) This is a 1/35 scale plastic model kit of the American M48A3 Patton tank, which served with distinction during the Vietnam War. ★The tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet is accurately reproduced. ★Details such as the searchlight and machine gun cupola are also brimming with realism. ★The kit includes accessory parts such as an engine exhaust snorkel, jerry cans, and spare track links as well as 2 tank crew figures.

Military figures & Accessories 1:35

1:35 WWII Fig.-Set Ger.Tank Grenadie.(8)

€7.19

Article number.: 300035061 Product: 1:35 Figure Set German Pz Grenardiere (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Jerry Can Set (12) Early

€6.99

Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the current standard, these Pzkpfw II look quite inferior both in fire and defensive powers. But when compared with those of other countries active at the time, the Pzkpfw II should be ranked as by far the most superior one. Indeed, its nimble mobility matching well with the German application was the driving force of the spectacular victory won by the Germans at the initial period of the World War II.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

€22.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

Military figures & Accessories 1:35

1:35 Zimmerit Dekor-Satz Tiger I

€11.29

Article number: 300012647 Product: 1/35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved.

Model ships 1:350

1:350 WWII Brit.Bat.Sh. Prince of Wales

€75.99

British Prince of Wales   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Messerschmitt Me262 A-1A

€44.99

Article number: 300061087 Product: 1:48 Ger. Messerschmitt Me262 A-1A About the Messerschmitt Me262 A-1a The revolutionary Messerschmitt Me262 was the first jet powered plane to see service. The construction of pre-production aircraft designated Me262 A-0 started in April 1944 but the fighter production version that should have been the first version to be mass-produced was delayed because of Hitler's strict contrary orders prioritizing the deployment of fighter/bomber A-2a version. Then, in November 1944, the Me262 A-1a fighter version was finally put into production. It was equipped with four 30mm cannons in the nose to counter Allied bombers and escorting fighters. Late production planes were equipped with hooks under the nose to mount rocket launchers and with 24 R4M air-to-air rocket under the wings making the Me262 the most feared German fighter by Allied pilots. About the model - Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. - 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. - The 4 X 30mm cannon mounted in the nose and cockpit have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. - R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. - Nose wheel well comes as a die-cast weight. - A pilot figure and decals for 4 different markings are included in the kit.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Suzuki GSX1100S Katana 1980

€104.99

Article number: 300016025 Product: 1:6 Suzuki GSX1100S Katana 1980 One of the most famous motorcycle shows in the world, is held every two years in Cologne West Germany, and the 1980 show is sure to stand out as one of the most unforgettable. One reason was that Honda released their CX500 turbo for the first time, and the second is that Suzuki"s GSX1100S "Katana" (Japanese for sword) was unveiled. The Honda CX500 attracted attention for its advanced engine techniques and the Katana for its advanced and aggressive body styling, which broke from common traditional motorcycle styling. Although the Katana GSX1100S styling impressed the many thousands of viewers, almost everybody thought that it was just for show and the production model would be quite different. During the summer of 1981, Suzuki released the production Katana with almost exactly the same body styling seen at the Cologne show, with subtle improvements in the engine and running gear. The body styling is from the genius of Mr. Hans A. Muth of West Germany, who spent much time ensuring driver comfort in his design, and which proved out in many wind tunnel tests. The entire styling was derived from research on the best drivers position, and the rearward placed backsteps and unique tank styling were not done just for the pleasing jet age appearance. Large capacity fuel tank and small fairing were blended together for the best airflow around the rider and the bike. Although the bike is most noticable for its styling, every part in it is quality. Engine is an air-cooled, parallel 4 of 1075cc, using 16 valves. With the unique Suzuki TSCC (Twin Swirl Combustion Chamber) in the engine, it puts out 111 hp. This tremendous power transmits into a road speed of 230 k/h and its unique body styling deeps it stable even at these high speeds. Suzuki is shipping a 1000cc Katana GSX1000S tot he American market, and also a 750cc version to the European market as well. Requests from Japanese enthusiasts prompted Suzuki to also market a 750cc Katana GSX750S to their market     Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 1mm OD Bla 2m

€4.49

Article number: 300012678 Product: 1:6/1:12/1:24 Cable 1mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 1,00mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model aircraft kits 1:72

1:72 P-51D Mustang North American

€15.99

Detailed Plastic Kit of model P-51D Mustang North American in scale 1:72   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Braided Hose 2mm Outer Dia

€5.89

Model aircraft kits 1:72

Focke-Wulf Fw190 A-3

€15.99

Article number: 300060766 Product: Focke Wulf Fw 190 A-3 Development of the FW190 series began in the Autumn of 1937, under a contract issued by the Reichsluftfahrtministerium (Air Ministry) for a single seat fighter to supplement the Messerschmitt Bf109. Two proposals were submitted by Kurt Tank, the technical director of the Focke-Wulf Flugzeugbau (aircraft factory). The proposal using the then new BMW 801 aircooled radial engine was chosen. This tough and powerful engine was placed in a robust airframe and provided superb handling, well balanced control, and brisk acceleration. It entered service in 1941, flying alongside the Bf 109 and it soon took control of air superiority over the English Channel. Establishing itself as a mainstay fighter of the Luftwaffe, it outperformed the contemporary Spitfire Mk.V's in almost every respect and maintained this advantage until the arrival of the Spitfire IX in July 1942. The Fw190 fighter underwent constant improvement throughout its life. The A-3 version used the improved BMW 801Dg engine that produced 1,700hp. Armament was increased from four to six guns, consisting of two rapid firing MG151's in the wing roots; two MG FF's outboard of the landing gear and two fuselage mounted MG 17 machine guns. Throughout WW2, many Luftwaffe squadrons allowed personal pilot markings and distinctive squadron insignia to be used, plus lower cowl, wing tip and rudder color additions to the original paint schemes. Detailed Plastic Kit of model Focke Wulf Fw 190 A-3 in scale 1:72   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

Manta Ray (2018)

€149.99

4WD assembly kit, clear polycarbonate Body, ESC included, Type 540 Motor, user guide   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Mazda RX-7 R1

€25.99

Other model kits

Mesozoic Creatures

€15.29

Article number: 300060107 Product: Mesozoic Creatures Not everything which lived during the age of the dinosaurs was a massive sauropod. This assembly kit set depicts a variety of smaller dinosaurs such as adolescent Parasaurolophus and Tyrannosaurus as well as Oviraptor and Hypsilophodon. A crocodile as well as an example of an ancestor to today's birds are also included. Use them to populate your dinosaur dioramas. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nismo GT-R LM Calsonic

€28.49

  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

SEIRAN

€13.99

Article number: 300060737 Product: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailed Plastic Kit of model SEIRAN in scale 1:72   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1/12 Honda Monkey 125

€36.49

Article number: 300014134 Product: 1/12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.

Model car kits 1:24

1/24 Mazda MX-5 RF

€41.99

Article number: 300024353 Product: 1/24 Mazda MX-5 RF Tamiya is delighted to announce a new stablemate for the popular MX-5 (also known as the Miata MX-5 in the US and Roadster in Japan) model Item 24342! This kit recreates the RF model that was originally announced by Mazda in 2016: the initials stand for Retractable Fastback, as the car features a sleek fastback hard-top design with innovative retractable roof. In fact, the actual car's three-piece roof opens and closes in just thirteen seconds, and all at the push of a single button. It also features tweaks to its chassis and suspension to accommodate the heavier top section, while retaining all of Mazda’s vaunted safety features. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 164mm, width: 80mm. • The kit depicts the 2017 model MX-5 RF, complete with options available on top grade models in the Japan market such as Recaro seats, and BBS wheels. • Modelers can choose to assemble the kit as Japanese, US, UK or European market spec, and have the option of depicting the hard top up or down, thanks to new roof and rear/side window parts. • Metal-plated parts are used to depict light reflectors and other components. • Decals are included for instrumentation and other details, as are metal transfers for emblems and side mirror surfaces.

Model car kits 1:24

1/24 Mercedes-AMG GT3

€64.99

Article number: 300024345 Product: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 JGSDF Light Armored Veh.

€46.99

Article number: 300035368 Product: 1/35 JGSDF Light Armored Veh. The latest kit to join the extensive 1/35 Military Miniature Series is this new kit of the Light Armored Vehicle, which recreates a domestic spec version of the vehicle such as that depicted in 1/48 by Item 32590 (previouslyreleased Item 35275 was an Iraq PKO spec vehicle). The Light Armored Vehicle is an integral part of Japan Ground Self-Defense Force (JGSDF) infantry units, key to the emphasis placed on mobility by recent policy changes. Around 1,900 in total have been provided to the JGSDF and the JASDF air arm. About the Model • This is a 1/35 scale plastic model assembly kit. Overall length: 128mm. • The unique form of the actual vehicle has been accurately replicated. • Features detailed synthetic rubber depictions of combat tires, transparent parts for headlights and tail lights, and a die-cast one-piece chassis for authentic weighty feel. • Assembly options include rooftop hatch in open or closed position, quadruple smoke dischargers (usually seen on command cars), and MINIMI machine gun. • A busy interior has recreations of seat, dashboard and accessories such as fire extinguisher. • Kit comes with seated driver figure depicted in the latest JGSDF body armor. • 3 marking options for vehicles with domestic JGSDF units are included.

Military figures & Accessories 1:35

1/35 Panther D Metal Barrel

€15.79

Military model vehicles 1:35

1/35 Sherman Easy8 EuroTheater

€52.99

Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 British 7ton AC Mk.IV

€21.99

Article number: 300032587  Product: 1/48 British 7ton AC Mk.IV   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Panther Ausf.D

€32.99

Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.

Model motorcycle kits 1:6

1/6 Link-Type Motorcycle Chain

€44.99

Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.

Model aircraft kits 1:72

1/72 Bf-109 G-6 Messerschmitt

€26.99

Article number: 300060790 Product: 1/72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (with distinctive eye marking on the Beule) and JG54. Detailed Plastic Kit

On-road RC cars (2WD/4WD)

1:10 RC 1991 Audi V8 Touring (TT-02)

€154.99

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC au TOM'S GR Supra (TT-02)

€164.99

Article number: 300058703 Product: 1:10 RC au TOM'S GR Supra (TT-02) Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi 90 quattro Racing TT-02

€169.99

This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX) 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi Quattro A2 (TT-02)

€154.99

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC ENEOS X PRIME GR Supra TT-02

€164.99

Article number: 300047514 Product: 1:10 RC ENEOS X Prime GR Supra TT-02 Here is another 1/10 R/C model assembly kit based on our popular TT-02 chassis. The ENEOS X PRIME GR Supra of ROOKIE Racing with a prominent orange color scheme is one of six GR Supra cars taking part in the Super GT series GT500 class in 2024. The carbon fiber body inspired by the GR Supra street car has aerodynamic devices – which differ for each manufacturer – at the front and rear and on door undersides. Its 2-liter 4-cylinder turbo engine is capable of 550hp and powers the rear wheels. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Escort Custom (TT-02)

€154.99

Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Ford Focus RS Custom TT-02 paint

€154.99

Article number: 300047495 Product: 1:10 RC Ford Focus RS Custom TT-02 Lack. Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford GT Mk.II 2020 (TT-02) PB

€159.99

Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Golf MK2 GTI 16 Rally MF-01X

€184.99

Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Lancia Delta HF Integrale TT-02

€169.99

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC LandRover Defender 90 CC-02

€294.99

Article number: 300058700 Product: 1:10 RC LandRover Defender 90 CC-02 Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC Neo Scorcher (TT-02B)

€149.99

Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

€234.99

Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Nissan GT-R Drift (TT-02D)

Article number: 300058623 Product: 1:10 RC Nissan GT-R Drift (TT-02D) Tamiya is delighted to announce a new release on the drift spec TT-02D chassis. This model depicts the Nissan GT-R, using the body originally included in Item 58411. The GT-R was unleashed on the world by Nissan in December 2007. Laden with a powerful 3.8-liter V6 twin-turbo engine, dual clutch transmission, independent transaxle 4WD and more, it was designed to be a supercar ready to be driven any time, anywhere and by anyone, and featured regular annual performance-boosting design tweaks. About the Model • This is a 1/10 scale R/C model assembly kit. • The sleek, powerful form of the GT-R is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • LED units are included for export version only! • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58411.

On-road RC cars (2WD/4WD)

1:10 RC Nissan Skyline GT-R R33 (TT-02D)

€194.99

Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D) Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes. About the Model • This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€179.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Rally MB-01

€154.99

Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Squash Van 4WD GF-02

€199.99

Article number: 300058725 Product: 1:10 RC Squash Van 4WD GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, ESC included, Type 540 Motor, Clear polycarbonate Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC The Grasshopper II (2017)

€119.99

Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC The Hornet 2004 2WD Buggy LWA

€134.99

Article number: 300058336 Product: 1:10 RC The Hornet 2004 2WD Buggy LWA About the model: - Length: 400mm, width: 230mm, height: 150mm. Weight: 874g - Solid bathtub frame with side bumpers - High performance Type 540 motor - Independent swing axle front suspension with friction dampers -Rolling rigid axle rear suspension with oil filled dampers - Sealed rear gearbox to protect diff gear during off-road running -Original 3-piece assembly wheels compatible with optional ball bearings (sold separately) - Straight ribbed racing front tires - Spiked buggy rear tires - Durable, shock absorbent polycarbonate body shell - Reinforced resin bumper - TEU-101BK Electronic Speed Controller

On-road RC cars (2WD/4WD)

1:10 RC Toyota GR 86 (TT-02)

€154.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyota Supra Drift Spec TT-02D

€194.99

Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota Tundra HighLift 3-Speed

€559.99

Article number: 300058415 Product: RC Toyota Tundra HighLift 3-Speed The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism. ● Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. ● Motor: Type RS540 ● Drivetrain: Shaft-driven 4WD ● Diff. Gear: Front/Rear 2-bevel Diff. ● Suspension: Fron/Rear Leaf Rigid ● Dampers: Front/Rear Friction Dampers ● Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top) ● Speed Controller: ESC   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Volkswagen Beetle (M-06)

€189.99

Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06) The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis. About the Item • This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC VW Beetle Rally (MF-01X)

€174.99

Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

Off-road RC cars

1:10 RC Wild Willy 2000 (WR-02)

€199.99

Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Scope of delivery: Kit including electronic speed controller as well as detailed and illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Front Fork Yamaha YZF-R1M

€29.99

Article number: 300012684 Product: 1:12 Front Fork Yamaha YZF-R1M Add an even deeper layer of realism to your 1/12 scale model of the YZF-R1M using this detail-up parts set depicting the bike's font fork! Metal and plastic parts are included to replace kit standard parts and provide an ultra-realistic finish to the model. • The set provides numerous individual parts including inner and outer tubes, plus parts depicting smaller pieces of the fork such as connectors and end caps. • Dedicated metal parts include reservoir tank, outer tubes, gold color fork tops and more. • Damper spring is given a realistic yellow painted finish (kit part is black). Front Fork Kit model, scale 1:12, Aluminum immersion tube and com- pensating holder anodized, mounting material, Instructions, Suitable for 300014133.

Model motorcycle kits 1:12

1:12 Honda NSR500 '84

€67.99

Article number: 300014121 Product: 1/12 Honda NSR500 '84 During the 1983 World Grand Prix season, Honda took the championship with the NS500 but it was clear that the power from the 2-stroke V3 engine would be insufficient for the next season. This led Honda to create the NSR500, which was powered by a more powerful V4 engine. It also featured a unique aluminum frame to house the engine and a radical layout in which the expansion chambers and the fuel tank were positioned above and below the engine respectively. The 1984 season was challenging but the following season saw the NSR500 demonstrate its excellent performance to win the championship. Technical data: Length: 166 mm Width: 52 mm

Off-road RC cars

1:12 RC Lunch Box Black Edition

€164.99

Article number: 300058546 Product: 1:12 RC Lunch Box Black Edition If you want to have cool wheelie fun, grab the TAMIYA Lunch Box Black Edition and do fat wheelies thanks to the wheelie bar. The original model appeared in 1987 as a monster that knows no bounds. The current reissue of TAMIYA in the Black Edition is equipped with a black colored ABS body and black rims. Chrome-plated components such as the radiator grille and bumper round off the look. 2-channel RC system with servo, 7.2 V battery pack & charger sold separately. Numerous optional tuning parts available. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1300R Hayabusa Street ´98

€42.99

Article number: 300014090 Product: 1:12 Suzuki GSX1300R Hayabusa Street ´98 About the Suzuki Hayabusa 1300 (GSX1300R) In 1998, the Suzuki Hayabusa 1300 (GSX1300R) was quite the sensation during its debut at the "INTERMOTO 98" show in Germany. The Hayabusa is equipped with a 175hp in line 4-cylinder 4 DOHC valve water-cooled engine. To ensure good airflow to the ram air duct, a unique cowling design with vertically positioned twin headlights was adopted. The Hayabusa also realizes quick and powerful acceleration and performs excellent curving as well as effective braking. For expert and average level riders alike the cutting-edge Suzuki Hayabusa 1300 has proven to be rider friendly, and developed around the concept of the "ultimate sports bike" continues to delight riders all over the world. About the model - 1/12 scale, Overall length: 178mm, Overall width: 71mm. - From its unique shape to the engine, this model accurately reproduces the real Hayabusa. - Parts such as upper cowling and tank are molded as one piece. - For engine, cowling, and swing arms screws are used for reliable attachment to the frame. - Metallic stickers are used to increase realism of the front fork. - Tires are made of real rubber.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha XV1000 Virago

€24.49

Article number: 300014044 Product: 1:12 Yamaha XV1000 Virago About the Yamaha XV1000 Virago The motorcycle, along with the automobile, has played a big role in transporting humans from place to place for many years. Man has always been able to adapt his tools for specific needs, and as the motorcycle became more and more a sport, or leisure transportation vehicle, it has been designed for more specific purposes. The off road, touring, motocross and speed bikes as well as the basic transportation motorcycle can be seen in most countries, but America seems to have a certain styling all its own. This so called "Chopper style" came about during the mid 1960's from the many modified Harley's done by members of the many motorcycle clubs around the country. There are many long straight stretches of good, high speed roadways in America, and to sit back comfortably, with feet resting on forward pedals and sitting on a very relaxing saddle, brought about these modifications. The Yamaha Company of Japan is well known for quality bikes around the world, and they have been making bikes for specific areas for years. The Yamaha XS650 Special released in 1978 had the American look, and since then this company has marketed bikes with similar styling. The XV1000 Virago is their latest, large bore, American styled motorcycle and sure to become popular. Its front wheel caster angle of 32 degrees provides an extended wheel base of 1525mm, making its straight running ability superb. The wide, pull back type of handle bars and the forward placed foot rests, allow the rider to sit up as if he was on a horse. A separate looking, loose cushion seat is almost like sitting on a sofa, and it is positioned at a height of only 715mm. The 70hp 981cc twin cylinder is in the "V" format and transmits its power via an enclosed drive shaft for quiet, maintenance free operation. The bike comes with much chrome and lots of gold plating, but it is done in such a manner that the bike does not look gaudy. It is a luxurious and comfortable     Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 RoadStar Custom

€48.99

Article number: 300014135 Product: 1:12 Yamaha XV1600 RoadStar Custom Big cruiser bikes are popular across the world, and a lot of owners like nothing more than to customize them to their own unique tastes. This updated assembly kit recreates just such a bike, a customized version of the mighty Yamaha XV1600 Road Star, the standard version of which was released as Item 14080. The XV1600 Road Star featured a 1,600cc V-twin that made it one of the most powerful motorcycles of its day, with telescopic front suspension and a rear shock tucked out of sight for a classic hardtail look to accentuate the low-slung lines, and liberal use of chrome. Customized bikes had side bags, a larger windshield, and many more variations. Item Contents/Information • This is a 1/12 scale plastic model assembly kit. Length: 208mm, width; 89mm, height: 120mm. • A customized version of the low-slung XV1600 Road Star is recreated in style, with metal-plated and clear parts, plus those recreating customized parts. • Comes with decals to recreate two marking options (green & black, or purple) which were available on bikes sold in Japan in 2000, plus masking stickers to help with the paint job. • The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece.

RC trucks

1:14 RC King Hauler Black Edition

€494.99

Article number: 300056336 Product: 1/14 RC King Hauler Black Edition This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor. Tamiya's Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya's Tractor Trucks may be connected to separately-sold semi-trailers.     Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC MB Arocs 3363 6x4 ClassicSpace

€464.99

Article number: 300056352 Product: 1:14 RC MB Arocs 3363 6x4 ClassicSpace This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons. The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, ABS body, 3-speed manual transmission Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Scania 770S 6x4 Silver pre-pain.

€589.99

Article number: 300056373 Product: 1:14 RC Scania 770S 6x4 Silver pre-pain. Tamiya welcomes a new addition to 1/14 Tractor Truck Series – this time, the Scania 770 S 6x4 produced by the Swedish manufacturer Scania. The Scania 770 S 6x4 is one of the trailer heads in the Scania’s top-grade S Series – which had undergone a full model change in 2016. This trailer head features a double rear-axle drive 6x4 chassis equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp which was the most powerful in the industry as of 2020. SCANIA 770S 6x4 Model kit, ABS injection moulded body w/ Aero-pack, Aluminum Ladderframe, 2-axles (driven), 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotor Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC trucks

1:14 RC Scania R470 Silver Edition

€464.99

Article number: 300056364 Product: 1:14 RC Scania R470 Silver Edition This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm. • The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish. • Interior features such as seat and dashboard are depicted. • 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

RC trucks

1:14 RC US Truck King Hauler Kit

€484.99

Article number: 300056301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads. RC Truck King Hauler   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Volvo FH16 XL 750 4x2

€484.99

Article number: 300056375 Product: 1:14 RC Volvo FH16 XL 750 4x2 Tamiya welcomes the Volvo FH16 Globetrotter XL 750 4x2 Tractor in our popular 1/14 Tractor Truck series! The FH16 series is the flagship of Swedish manufacturer Volvo Trucks and it was the result of a model change in 2012. The top-class Globetrotter XL offers comfortable interior space and superior aerodynamics, and allows long-distance travel coupled with a high-output 750hp engine. Volvo FH16 XL 750 4x2 Model kit ABS Injection body with aero-pack Aluminum Ladderframe, 1 drive axle, 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotr Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Figure Ger. Infantry Man

€18.99

Article number: 300036303 Product: 1:16 Figure Ger. Infantry Man This is a 1/16 scale plastic figure assembly kit depicting a WWII German infantryman in late-war camouflage. ★The infantryman is captured in action pose, aiming his MP40 with elongated stock. ★Separate parts are also included for various accessories such as ammo and gas mask cases, grenade, shovel and more.   Warning! Not suitable for children under 14 years.

RC tanks

1:16 RC Panzer Tiger 1 Full Option

€719.99

Article number: 30006010 Product: 1/16 RC Panzer Tiger 1 Full Option Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks. *1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm) *A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required. Powerful Engine Sound Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I ! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right.

Model car kits 1:20

1:20 Lotus Type 79 1978

€67.99

Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 •1/20 scale plastic assembly model kit of the Lotus type 79. •The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. •The monocoque chassis, suspension, and engine have been precisely reproduced. •Synthetic rubber tires included. •Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. •Newly designed tires and metal funnel covers included. •Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.

Model car kits 1:20

1:20 Porsche 935 Vaillant-Kremer

€47.99

Assembly kit, 1/20th scale, length: 235mm, new rubber tires, cartograf Decal sheet

Model car kits 1:24

1:24 Honda Prelude (BF1)

€44.99

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mercedes-Benz 300SL Full-View

Assembly model kit 1/24 scale, Shaped Motor, transparent body   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 NISMO Skyline GT-R Z-tune (R34)

€38.49

Article number: 300024282 Product: 1/24 NISMO Skyline GT-R Z-tune (R34) Tamiya has created an all-new mold to produce the body for this 1/24 scale NISMO GT-R Ztune. JGTC Champion team NISMO has turned its skills towards producing the ultimate road car, and we thought it was only right to do it justice with a truly excellent model. About the GT-R Z-tune The NISMO team took a Nissan Skyline GT-R (R34) base and hand-built it into a totally customized supercar. The resulting GT-R Z-tune made a huge splash during its unveiling at the 2005 Tokyo Auto Salon. Upgrades to internal mechanics include the souped-up 2.8L twin turbo engine with 500hp output, Sachs special suspension system and brakes jointly designed with engineers from Brembo. The lightweight carbon body features front bumper spoiler, hood with louver, side skirt and rear underspoiler. Full of racing-spec parts while featuring excellent power and handling, NISMOs Z-tune has been called the ultimate road-going car, combining luxury with superior performance.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Fairlady 240Z Street-Custom

€47.49

Assembly model kit 1/24 scale, length: 172mm, Shaped Motor, manual   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Z 2022

€48.99

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota G.R. TS050 HYBRID

€58.99

Article number: 300024349 Product: 1:24 Toyota G.R. TS050 HYBRID 2018 was a truly landmark year for TOYOTA GAZOO Racing and their TS050 Hybrid car, which made a huge splash in the racing world thanks to a refined design with great aerodynamics and a hybrid powertrain pairing a 2.4-liter engine and lithium-ion battery. Now, following on from Mini 4WD and R/C models, the car is a welcome addition to the impressive stable of racing cars in the Tamiya 1/24 Sports Car Series. About the Model - This is a 1/24 scale plastic model assembly kit. Length: 194mm, width: 79mm, height: 44mm. - The form of the 2018 version of the TS050 Hybrid is captured with superb accuracy: updated aerodynamics components (both exterior and interior), longer front fenders, and tweaked diffuser design. - A busy interior features depictions of the driver seat, lithium-ion battery and more. - Metal-plated part is used to recreate the silver section on the top of the cockpit. - Also included are decals for the numerous sponsor logos on the number 7 and 8 cars, plus masking stickers for use in the paint job. - Dedicated metal transfers recreate side mirror surfaces and headlight sections.

Model car kits 1:24

1:24 Toyota GR 86

€41.99

Model car kits 1:24

1:24 Toyota Supra

€28.49

Article number: 300024123 Product: 1/24 Toyota Supra During the early 1970's, the Toyota Motor Company of Japan ventured into the specialty car field, and soon established a reputation for producing cars with both quality and performance. Their "Supra" series is often described as a re-creation of Toyota's legendary 2000GT sports car, which was an excellent combination of high performance and elegance. Using their latest racing automotive technology, plus their uncanny design genius, the newly designed Supra made its sensational debut during February 1993. Massive and powerful are the words that can best describe this awesome specialty sports car. The top of the line Supra uses a 3-Liter, DOHC 24 valve, straight six cylinder, twin-turbocharged engine, capable of 320 horsepower and 43.6kg/m of torque. In contrast with the company's previous Supra model, which had a very fluid styling composed of gentle curves, the new Supra has a bold dramatic appearance due to its wider body and larger 17-inch wheels. An oversized rear wing has been installed to improve downforce performance during high-speed cruising. This Supra's newly refined suspension has one of the best road holding systems offered by any mass produced sports car, and with its ventilated disk brakes fitted at all corners, and the front end utilizing four piston calipers, it has unmatched stopping power. Toyota's Supra is this company's attempt to furnish a car that has uncompromised drivability, safety, high performance and relaxing comfort.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 F4U-1 Corsair "Birdcage"

€134.99

Article number: 300060324 Product: 1:32 F4U-1 Corsair "Birdcage" The F4U-1 Corsair® was a truly unique aircraft, with a powerful 2,000hp engine and a massive 4m propeller, not to mention the highly characteristic inverted gullwings. In October of 1940, it was the first American fighter to achieve a speed of 400mph (around 640kph). Initial production models of the aircraft featured a striking canopy called the "Birdcage". The aircraft took part in operations from February 1943, and with its powerful 12.7mm machine guns proved to be a formidable opponent for the Japanese Zero Fighters. In order to capture the aircraft as accurately as possible, Tamiya designers not only inspected, measured and examined the real aircraft at five different museums across North America, they were also given access to Northrop-Grumman's blueprints. The result is a highly detailed and precise 1/32 scale model of the F4U-1 Corsair. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 Lockheed Mar.F-16CJ Fighting Falcon

€164.99

Article number: 300060315 Product: 1:32 Lockheed Mar.F-16CJ Fighting Falcon This is the first ever 1/32 scale F-16 model to replicate the characteristic large air intake duct, nicknamed "Big Mouth". The F110-GE-129 jet engine is also replicated in precise detail, and can slide into place on a hook and rail system exactly like the actual aircraft. The entire engine can also be displayed outside the aircraft using the included cart. This model achieves a level of accuracy only possible in such a large-scale work. The upper surfaces of the wings are molded to the main body of the plane in one single piece, creating a "Blended Body" which artfully depicts the F-16's beautiful, streamlined form and proportions. The model features screw-mounted main body and die-cast landing gears with actual rubber tires for extra durability. This model makes use of the newly developed mini poly caps to ensure that missiles, ECM pod and external fuel tanks are removable and interchangeable even after assembly. This way, modelers can enjoy depicting different weapon configurations specific to various F-16 missions. Use of poly caps also enables trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps to move freely after assembly. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 Mc Donnell F4 C/D PHANTOM II

€124.99

Article number: 300060305 Product: 1:32 Mc Donnell F4 C/D PHANTOM II The F-4 Phantom II was originally conceived as a carrier-borne fighter for the Navy in the late 1950s but was eventually also adapted by the Air Force and Marines in addition to the air forces of many other countries. This model kit can depict the first variant used by the Air Force, the F-4C, as well the subsequently upgraded F-4D. The kit features a one-piece fuselage for easy assembly and die-cast metal landing gear legs to ensure a stable stance after the kit is finished. The canopy and airbrake may be assembled in either open or closed positions. A wide range of ordnance, two crew figures, and three marking options are also included. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 North American P-51D Mustang

€134.99

Article number: 300060322 Product: 1:32 North American P-51D Mustang The P-51 Mustang is considered by many to be the best fighter aircraft of WWII. The P-51 Mustang came about when the British Purchasing Commission asked North American Aviation to produce the Curtiss P-40 for the RAF, but North American stated they could build something better. The P-51D is considered by many experts to be the definitive variant of the Mustang as it was the most widely produced. It featured a bubble canopy which gave the pilot superb all-round visibility as well as a heavier armament of six 12.7mm machine guns. Wing racks allowed the carriage of drop tanks to extend range or bombs for ground attack. P-51Ds were instrumental in helping the Allies gain air superiority over Europe, and after Germany's defeat, they continued their role as long-range escorts for B-29s attacking Japan. Many also saw service during the Korean War as fighter-bombers and a few even continued to serve with air forces of less developed nations until the 1980s. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Tank Churchill Mk.VII (6)

€39.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

Military model vehicles 1:35

1:35 Brit. Univer. Carrier Mk.II (5)

€21.49

Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Univers. Carr. Mk.II (3)

€23.99

Article number: 300035249 Product: 1:35 Brit. Univers. Carr. Mk.II (3) During WWII, the British army used various small tracked personnel carriers such as the Universal Carrier Mk.II, which first appeared in 1942. Tamiya's plastic assembly model kit accurately reproduces this vehicle's compact design, suspension, and equipment. Included in the set are three figures to depict a driver, gunner, and radio operator as well as an additional two figures in North African front uniforms. Four kinds of decals are also included to allow you to depict the Universal Carrier Mk.II in a wide variety of battlefield settings including North Africa, Italy, and France.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 British MBT Chieftain MK.5 (3)

€25.99

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Bundeswehr Leopard 2A6 (3)

€63.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Sand Bags (36+12)

€5.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Tank Barricade

€5.49

Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★ Creates six each of wooden and metal barricade depictions. Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Field Commander (5)

€20.49

Article number: 300035298 Product: 1:35 Fig-Set Ger. Field Commander (5) WWII German Commanders This 1/35 scale plastic assembly kit contains five WWII German field commander figures. ★The set includes an high-rank officer pointing out the target holding a map, a commander with a briefcase and a map case, a commander with a MP40 gun, a low-rank officer checking his Luger P08 gun, and a radio operator. ★The MP40 and Luger P08 guns as well as holsters, briefcase, and the radio have a rich finish. About the Uniforms and Equipment The German commanders wore uniforms which had same design as those of soldiers during WWII. However, commanders were allowed to wear tailor-made uniforms made from nicer materials. Likewise, they also wore better quality coats as well as leggings and boots. They usually carried guns such as the Luger P08 and Walther P38, but often used MP40 machine guns to fight against enemies on the frontlines.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. Infantry 1943-45 (5)

€17.99

Included: Assembly Kit, 1/35th Scale, 5 figures, user guide, accessories, Suitable for 300035381 tank kit   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 38to Tank Destr. Hetzer (1)

€56.99

Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

€32.99

Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1)   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Horch 4x4 Type1A Veh. (1)

€17.99

Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Kübelwagen T82 Africa (1)

€19.49

Article number: 300035238 Product: 1:35 Ger. Kübelwagen T82 Africa (1) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. The car's interior and under chassis area including the suspension arms and engine guard are realistically reproduced. A standing soldier figure wearing shorts and a short sleeved shirt included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. II Ausf. A/B/C (1)

€47.99

Article number: 300035292 Product: 1:35 Ger. PzKpfw. II Ausf. A/B/C (1) After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II tanks were manufactured. They led the surprise invasion on Poland and were the main tanks used in the attack on France. Later, they were successfully used in reconnaissance missions until the end of the war. About the Model •1/35 model of the German Panzerkampfwagen II tank. •Supplemental armor plate parts can be installed in the same manner as the actual tank. •Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants. •Assembly-type tracks feature single-piece sections for effortless construction. •Comes with a commander figure and three kinds of markings for the French campaign. •Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.161/2 Panzer IV J (1)

€47.99

Article number: 300035181 Product: 1:35 Ger. SdKfz.161/2 Panzer IV J (1) For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schürzen" armor additions. Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension. Additionally, the kit features belt type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)

€23.99

Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

€39.99

Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.182 Königstiger Por-T(1)

€47.99

Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)

€89.99

Article number: 300035239 Product: 1:35 Ger. SdKfz.9 Famo 18to Halftrack(8) Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the "Famo" In the wake of Blitzkrieg advances made by the Wehrmacht at the outbreak of WWII, the recovery of damaged or broken tanks from the battlefield proved relatively simple. After securing an area, reinforcing divisions could easily send inoperative vehicles back to the homeland for repair via railway. However, in the seesaw battles with the British Army in North Africa and against the Russian Army on the Russian front, the quick replenishment of tank strength became an indispensable element of Wehrmacht battle strategy. The utilization of the 18 ton Heavy Half-Track "Famo" proved fundamental to this strategy. The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops. About the Model ★1/35 plastic assembly kit of the largest half-track in the German Army. ★Overall Length: 243mm, Overall Width: 75mm. ★Highly detailed model captures the size and tank-towing power of the FAMO. ★Realistic treads and suspension. ★Synthetic rubber front tires and steerable front wheels for maximum realism. ★Rear gate and storage doors can be assembled in the open or closed position. ★Tank towing drawbar included. ★Can be assembled with or without engine side panels, revealing fully detailed engine. ★Engine can be assembled outside of FAMO. ★Eight figures (four variations) included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.9 Famo w/ Lowloader(12)

€159.99

Article number: 300035246 Product: 1:35 Ger. SdKfz.9 Famo w/ Lowloader(12) About the Model ★After the impressive debut of the FAMO kit, Tamiya began to receive many requests for variations. Among the several types of FAMO to appear during WWII, the most frequently requested was the Sd.Ah.116 trailer-towing version. ★Stretching over 640mm, Tamiya's new beast-of-burden is 50mm longer than the Dragon Wagon and is the longest kit in the MM series. ★The massive trailer unit consists of both the front and the rear wheeled pieces on either ends of the long platform piece. ★Real rubber tires for heightened realism. ★This kit features ample metal and metal plated parts for various accessory pieces such as a chain for fixing the tank in tow to the platform. ★This kit brings back the eight figures of four poses included in the original "FAMO" kit, plus four all-new figures of three poses acting out a tank loading scene at the rear of the trailer.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Isreali MBT Merkava (1)

€28.49

Article number: 300035127 Product: 1:35 Isreali MBT Merkava (1) Thanks to its manhandling of the Syrian-operated Soviet T-72 during the 1982 Lebanon War, the Merkava became a well-known and feared presence. This precision plastic model assembly kit recreates the Merkava, breathtakingly capturing its form including angled spaced armor across the hull and wedge-shaped cast turret with 105mm rifled gun. Details such as the thermal cover, side skirts, machine gun and more are depicted with aplomb. A commander figure is also included. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ital. MTk. Carro Armato M13/40 (2)

€47.99

Article number: 300035296 Product: 1:35 Ital. MTk. Carro Armato M13/40 (2) During WWII, the Italian army used the M13/40 as its main tank. It featured a riveted construction and bogey-style wheels on a leaf spring suspension with a 47mm main gun featuring on Italy's first ever hydraulically operated turret. In addition, the M13/40 was powered by a 125hp V8 liquid-cooled diesel engine which produced a top speed of 30km/h. From July 1940 through to 1943, approximately 800 units were produced. They fought mainly alongside the German African Corps at the North African front. This is a 1/35 scale plastic assembly kit model. - Length: 143mm. The unique riveted form of this tank is faithfully reproduced. - Easy to connect assembly type tracks included. The suspension features a highly realistic finish. - Metal parts for the gun barrel and photo-etched parts for the anti-aircraft gun sight etc are included. - Other highlights of this model are its range of tools and radiator cap. - A standing figure, a sitting tank crewman figure, 3 kinds of decals for the North African front, and a set of badges of rank are included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 MBT Leopard 2 A7V

€59.99

Article number: 300035387 Product: 1:35 KPz Leopard 2 A7V Nearly twenty years since the release of Item 35271 (1/35 Leopard 2 A6) in 2004, Tamiya is proud to welcome the Leopard 2 A7V with totally new parts into 1/35 Military Miniature Series. The Leopard 2 A7V is an improved version of A7 (A7 is improved version of A6 and the "V" in the A7V designation stands for "verbessert" (improved) ), and features additional hull front armor and side skirts for improved defense. The suspension was also improved to help deal with the tank’s extra weight. The A7V inherits the A6’s L/55 120mm gun, but with the updated shell, the A7V can take on enemy armor up to five kilometers away. Units began receiving the A7V in September, 2021 and A7Vs saw further improvements such as turret-top stowage boxes and main sight visor. It seems with that this venerable tank’s 40-year career is set to carry on into the future thanks to its continued evolution. 1/35th scale, assembly kit, Model of the Leopard 2A7V, tools, paints and glue required   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Modern JGSDF Type 10 Tank

€63.99

Article number: 300035329 Product: 1:35 Modern JGSDF Type 10 Tank The Type 10 is the Japan Ground Self Defense Force’s next generation main battle tank. Now, it joins its predecessors the Type 61, Type 74 and Type 90 in the Tamiya 1/35 Military Miniatures series. The Type 10 was first shown to the world in 2010 (that’s where the 10 in its name comes from), and was assigned to units starting in 2012. Among the many advances from the previous Type 90 model are a Japanese-made 120mm smoothbore main gun, and the so-called C4I system. This state-of-the-art computerized system allows the Type 10 to be connected to a computer network and share information with other tanks, enabling co-ordinated actions. About the Model • 1/35 scale plastic assembly kit • Features detailed and faithful replication of modular armor, as well as the 120 mm main gun. • Lower hull rubber skirts and belt-style tracks ensure the base of the model is also highly realistic. • Includes 2 figures to add to the realism of modelers’ dioramas. • Comes with 3 sets of markings.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M151A2 Fiord MUTT w/TOW-Miss.(1)

€13.49

Article number: 300035125 Product: 1:35 US M151A2 Fiord MUTT w/TOW-Miss.(1) The familiar Jeep was born during WW2 and it is said that it contributed greatly to the allied victory during that time. Following the conflict, this vehicle was widely used by most countries of the world as a small transport for the ground forces and later employed large calibre weapons systems for ground combat support. The U.S. Army first utilized this small vehicle in ground support firepower, by mounting the newly designed 105mm recoilless rifle in the rear of the Jeep. This weapon was developed to combat heavily armoured tanks and other tracked vehicles; however it was later adapted to anti-personnel operations with the development of anti-personnel shell charges. When the newer 106mm recoilless rifle came into being, it replaced the 105. This weapons system was mounted in the rear part of the Jeep, but could be also dismounted on a tri-pod for fixed use. As the old jeep became replaced with the newer M151 Ford MUTT, the 106 was also adapted to it. When the M151A2 was released during the late 70's, the model with the 106 rifle mounted was called M825. It had a beefed up rear suspension system to accept the rifles added weight of 325kg. Shortly the TOW missile system replaced the 106 recoiless rifles, as the main anti-tank mobile weapons system. Development of the TOW system began in the 1960's as a replacement for the large and heavy recoilless rifles. It was combat tested during the Vietnam conflict and proved its power and accuracy. It was further improved and finally replaced most of the 106's still in service. Officially it is called the BGM-71A; however, it is most widely called the TOW missile system which stands for Tube launched, Optically tracked, Wire guided, missile system. When the missile is fired at a target, the shooter maintains the target in the cross hairs of the sight. The infrared rays of the missile exhaust are sensed by the optical sight and the computer compensated for the speed of the target and missile, guiding it via the wire trailing back to the vehicle. A far greater percentage of hits are recorded with this system, and it is easier to operate. Maximum range for shooting is 3750m which is much greater than the 1097m effective range of the 106. M151A2 w/Tow Missile   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M151A2 Ford MUTT Truck (1)

€13.99

Article number: 300035123 Product: 1/35 US M151A2 Ford MUTT Truck (1) The U.S. Armoured vehicle test course is located in Aberdeen, Maryland, and is one of the most rigorous and demanding coursed in the world. Early in April 1957, a familiar looking small vehicle was seen to be running over the course with comparitive ease, and upon closer inspection it turned out to be the replacement for the well known Willy's "Jeep", the new Ford M151. Outwardly this new vehicle loos very much like its older brother. Both are small, compact, rugged, simple to operate and maintain; however, the 151 incorporates all of the latest advanced features learned during combat operations in conflicts since world war II. Features such as the newly developed OHV engine, light semimonocoque body and 4 wheel independent suspension systems allowed it to outpoint all other submitted replacement vehicles for the ageing WWII Jeep. Development for this replacement vehicle was started by the Ford Motor Company were licensed to produce the vehicle and they delivered approximately 10,000 units a year to the U.S. Army, Navy Air Force and Marines. Shortly after its adoption it was selected by most of the nations of the free world as a replacement for their own light utility vehicles. Some of the advanced features incorporated into the M151 caused problems and defects were detected in the initial shipments, among the most serious was the strength and stability of the rear suspension system which was corrected and improved in 1964 and 1970. The M151A2 now in service has added safety features like stiffer rear suspension, large blinder lamps and a two step windshield wiper, safety glass and an impact absorbing steering wheel. With its extreme versatitliy the basic M151 can be altered into a combat ambulance; radio communications vehicle; 105mm recoilless rifle transport and a launcher for the new tow missile system adopted in the late 70's. Combat experience in VietNam has shown that the Ford M151 Military Utility Tactical Truck (MUTT) is indeed a very versatile go anywhere combat weapon and is likely to remain in service for years to come with military forces worldwide. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M18 Hellcat Tank Destroyer

€48.99

Military model vehicles 1:35

1:35 US M551 Sheridan (Vietnam)

€59.99

Article number: 300035365 Product: 1:35 US M551 Sheridan (Vietnam) Vietnam Campaigner The lightweight M551 Sheridan was designed as an airliftable tank, a cutting-edge design with aluminum alloy hull and powerful 152mm gun/launcher. Work began on it in 1959, and it was officially adopted in May 1966, with 1,600 produced by November 1970. Its first taste of live action came in the Vietnam War, fulfilling both shelling and offensive roles in a punishing environment, and it would also go on to serve in the Gulf War conflict. Experience taught valuable lessons on the use of the Sheridan, and led to reinforced armor to combat land mines, while some were given a wire netting RPG screen for protection from anti-tank rockets, and even the large gun shield from the M113 ACAV. About the Model ★This is a 1/35 scale plastic model assembly kit of the M551 Sheridan. Length: 185mm, width: 80mm. ★A highly accurate rendering of the powerful form with 152mm gun/launcher based on extensive research of the actual Sheridan. ★Authentically captures a Vietnam War vehicle, with optional chain link anti-RPG net and gun shield. ★Choose open or closed rotating driver's hatch. ★Assembly type tracks feature one-piece straight sections. ★Nylon mesh is included to recreate anti-RPG net and engine grille mesh. ★Clear parts recreate periscope components. ★Comes with commander and loader figures, plus torso driver figure. ★2 Vietnam War marking options are included.

Military model vehicles 1:35

1:35 US MBT M1A1 Abrams w/Mine Plow(2)

€49.99

Article number: 300035158 Product: 1:35 US MBT M1A1 Abrams w/Mine Plow(2) Minefields were a constant hazard for invading U.S. forces during the Persian Gulf War of 1991; chief among their countermeasures was the trusty M1A1 tank fitted with a mine plow. This plastic model assembly kit expertly recreates such an M1A1 Abrams with mine guard and plow blade equipment depicted using separate parts. Metal chains and enamel wire are included, to be employed in the recreation of the roller at the front of the vehicle. Modelers can choose to assemble the model with hatches open or closed, and will be delighted by the range of accessories, including spare wheels, ammo cases and more! The kit comes with a full body commander figure and loader torso figure to further enhance its realism. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Med.Tank M4 Sherman Ea.(3)

€35.99

Article number: 300035190 Product: 1:35 US Med.Tank M4 Sherman Ea.(3) This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory. The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch. Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced. Modellers can also enjoy turret interior details such as the main gun breech and radio equipment. Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included. Comes with driver and radio operator torso figures as well as 1 commander figure.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWI Brit. Tank Mk. IV Male (mot.)

€95.99

Article number: 300030057 Product: 1/35 WWI Brit. Tank Mk. IV Male (mot.) Tamiya is delighted to announce its maiden foray into the world of WWI models, in the year which marks the 100th anniversary of the outbreak of hostilities in what was then known as the Great War. The tanks which appeared in the conflict were the first ever seen on the battlefield, and were the forerunners of a whole line of military vehicles which is still being developed further today. The Mk.IV tank was a successor to the Mk.I, which was drawn up by British designers in attempt to break the stalemate of trench warfare experienced on the Western Front; the rhombus-shaped hull was designed to aid in crossing the extensive network of trenches. The Mk.I, first thrown into live action in September 1916 during the Battle of the Somme, had "male" (fitted with 57mm, 6-pound guns) and "female" (fitted only with machine guns) versions. Around 1,000 Mk.IV tanks were manufactured after 1917, and they inherited their shape and male/female weaponry and classifications from the Mk.I, but with significantly upgraded armor. Around 400 were used en masse in the November 1917 Battle of Cambrai to great effect, and with the world cottoning on to the new vehicle’s potential the maiden tank vs. tank battle was not far behind: in 1918, the Mk.IV faced off against its German counterpart the AV7.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig.-Set MG-Crew Maneuver (5)

€12.29

Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Ger. Cargo Truck 3to (2)

€44.49

Article number: 300035291 Product: 1:35 WWII Ger. Cargo Truck 3to (2) About the 3Ton 4x2 Cargo Truck The German army in WWII used a wide variety of wheeled vehicles as part of their overall strategy of fast mechanized warfare. Among the most widely used was the 3Ton 4x2 Cargo Truck, a truck design that was first produced in the 1930s. Featuring a dependable 6-cylinder gasoline engine,the 3Ton 4x2 Cargo Truck could take on a very large payload disproportionate to its size. They proved to be not only extremely reliable, but also very versatile, and were employed in a wide variety of roles, including fuel truck, ambulance, radio truck, as well as general-purpose cargo truck. About the Model •High-quality 1/35 scale assembly model kit of the 3Ton 4x2 Cargo Truck. •This kit is an all-new molding, and is much more accurate than kits current on the market. •The actual trucks chassis had a forward slant (designed to balance the cargos weight), and this unique feature has been accurately reproduced. •Suspension features a reasonable number of parts for easy assembly without sacrificing detail.- Driver and navigator figures included. •Accessory set of fuel drums and jerry cans also included for a full cargo load. •Comes with 4 types of markings, including both German army and Luftwaffe units. •To aid with painting, window masks will be included for the first time in a military model. •The actual truck served from the 1930s to the end of the war on all battle fronts, so this model can be displayed together with a wide range of other Tamiya 1/35 scale vehicles and figures such as Sturmgeschutz III Ausf. B and King Tiger. Model kit, Scale 1:35, Vehicle, 2 Figures, Manual, Decal, Length 174 mm.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Zimm.Ph.Ätzt.f.Königstiger Porsch.

€12.49

Article number: 300012649 Product: 1/35 Zimmerit Coating Sheet - King Tiger Porsche Turret Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. These Zimmerit stickers enable easy reproduction of Zimmerit on Item 35169 German King Tiger "Porsche Turret". By using this sticker set it will allow novice modelers a way to add Zimmerit to their models without the stress of using a two-part putty.

Military figures & Accessories 1:35

1:35 Zimmerit Sheet Panther G Early

€13.49

Article number: 300012646 Product: 1:35 Zimmerit Sheet Panther G Early Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. Made for the novice to intermediate modeler in mind, these stickers enable reproduction of Zimmerit on Item 35170 German Panther Ausf.G Early Production without the use of putty or more advanced modeling techniques.

Military figures & Accessories 1:35

1:35/1:16 WWII Figure Insignia Decal-Set

€10.49

Article number: 300012625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. 1/16 1/35 SCALE WWII GERMAN MILITARY INSIGNIA DECAL SET   Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 Jap. Schlachtschiff Yamato

€289.99

Article number: 300078025 Product: 1:350 Jap. Schlachtschiff Yamato Based on the latest historical research, this famous WWII battleship has been reproduced down to the finest detail in this 752mm long 1/350 scale model kit. Even parts which had not been seen before in model form, such as the turret barbettes, have been reproduced as Tamiya challenges conventional ship model standards. This model accurately depicts the Yamato with increased anti-aircraft armament as she appeared on her final mission to Okinawa and may be assembled for either full-hull or waterline display. Two sheets of photo-etched parts for details such as ladders and cranes are also included. With this level of engineering, accuracy, and detail, this is literally Tamiya's new flagship model. Reference Booklet Included (B5 size, 32 pages) Reference Booklet which provides background information for the Yamato, descriptions of her features, and some interesting facts about the WWII Japanese Navy is included with kit.

Model ships 1:350

1:350 Brit. Battleship King George V

€84.99

Article number: 300178010 Product: 1:350 Brit. Battleship King George V A Classic British Battleship This kit depicts the HMS King George V, the lead ship of her namesake class of battleships which served the Royal Navy during WWII. Her flat-sided bridge area and distinctive stern shape have been accurately reproduced. Modellers can also enjoy exploring the layout of various superstructure areas such as the navigation and compass decks. Her formidable appearance is completed by her armament of ten 14-inch guns, sixteen 5.25-inch guns, and over 100 anti-aircraft guns. The model comes with a stand and nameplate for a professional display. Length: 649mm, beam: 90mm.

Model ships 1:350

1:350 Jap. Schwerer Kreuzer Chikuma

€134.99

Article number: 300078027 Product: 1:350 Jap. Heavy Cruiser Chikuma This is a highly detailed scale model replica in 1/350 scale of the Japanese Heavy Cruiser Chikuma. Historical background Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN's success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita's fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.   Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 U.S. Navy DD445 Fletcher

€35.99

Article number: 300078012 Product: 1:350 U.S. Navy DD445 Fletcher A Highly Decorated Destroyer USS Fletcher (DD-445) was the lead ship of her namesake class of destroyers, of which 175 were built during WWII, and she went on to a long and distinguished service career. Her balanced form as well as details such as her 5-inch DP gun turrets, quintuple torpedo launchers, twin 20mm anti-aircraft guns, and depth charge launchers have been accurately reproduced in this stunning model kit. The gun barrels, gun turrets, and torpedo launchers are all movable to enable dynamic posing. A display stand with name plate is also included. U.S. Navy DD445 Fletcher

Model ships 1:350

1:350 WWII Ger. Battleship Bismarck

€82.99

1/350 Bismarck

Model ships 1:350

1:350 Yamato 2013

€114.99

Article number: 300078030 Product: 1:350 Jap. Yamato 2013 Battleship With many revolutionary features incorporated into her design, the Yamato was completed in December 1941, and met her final fate at the hands of American Navy carrier aircraft in the South China Sea while on a one way mission to Okinawa. This model features minor modifications to Tamiya"s previous Yamato replicas Items 78002 and 78014, and has her looking as she did just prior to departing for her final mission, in an exquisite 1/350 scale assembly kit display model. The Yamato"s massive imposing silhouette is accurately reproduced, and both the main gun turrets and secondary armament turrets can be rotated even after assembly. - Comes with a display stand. - Comes with newly-designed mast parts.

Model aircraft kits 1:48

1:48 Brit. Supermarine Spitfire Mk.I

€43.99

Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

Model aircraft kits 1:48

1:48 F-16CJ Fighting Falcon Lockheed Mar

€62.99

Article number: 300061098 Product: 1/48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.

Model aircraft kits 1:48

1:48 Fairchild Republic A-10A Thunder.II

€38.49

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Bf109 G-6 Messerschmitt

€49.99

Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

Model aircraft kits 1:48

1:48 Ger. Focke Wulf Fw190 A-8/A-8R2

€38.49

Article number: 300061095 Product: 1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2 Combating the Flying Fortresses 　 In 1944, as the U.S. began their long range strategic bombing campaign in earnest with heavily-armed B-17 and B-24 bombers, the Luftwaffe developed the specialized "bomber-killer" R2 variant of the Fw190 A-8. Tamiya now brings you this formidable fighter in the 1/48 scale, and with all the parts included in this kit you can choose to build either the R2 variant or the A-8. About the Fw190 A-8/R2 　 The Focke-Wulf Fw190 was one of the Luftwaffe's best front-line fighters of WWII. Of all the different variants, the A-8 armed with four 20mm cannon and two 13mm machine guns was the most widely produced. A sub-variant of the A-8 was the R2, which had two of the 20mm cannons replaced by more powerful 30mm guns and added armor protection for its role in attacking the giant 4-engined Allied bombers.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Heinkel He162A-2 Salamander

€40.99

Article number: 300061097 Product: 1/48 WWII Dt.Heinkel He162A-2 Salamander The Luftwaffe's Last Hope As the situation became more desperate for the German forces near the end of WWII, a call was made for a new inexpensive jet fighter that would be simple to produce and fly. In the amazingly short span of 3 months from drawing board to first flight of the prototype, Heinkel produced the small, sporty-looking He162. The lightweight fighter featured mainly wooden construction and was powered by a BMW003 turbojet, which made it the fastest jet fighter of WWII with its 838km/h top speed. Reaching combat units in late March 1945, the little fighter managed to record some combat successes despite the acute fuel and parts shortage. About the Model High-quality assembly kit display model of the He162 A-2 "Salamander" jet fighter. ★Length: 205mm, Width: 149mm ★Top-mounted BMW003 turbojet engine with parts for opened and closed engine bay covers to allow full display of internal details. ★Special dolly included to display the engine separate from the aircraft. ★Canopy can be posed in the open or closed positions, and the ejector seat is removeable. ★Includes 1 pilot figure and 4 types of markings.     Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Ger. Nashorn Tank destroyer (1)

€30.99

Military model vehicles 1:48

1:48 Ger. Pz.Kpfw.IV Ausf. H Late Prod.

€30.49

Article number: 300032584 Product: 1:48 Ger. Pz.Kpfw.IV Ausf. H Late Prod. The Panzer IV was one of the most feared weapons in WWII, and would serve German forces throughout the conflict in the guise of a number of variants. The Ausf.H variant itself featured early, middle and late production types, all of which were armed with a L/48 75mm gun and featured "Schürzen" armor side skirts for greater protection. Late production Panzer IVs were identifiable by their tracks: they lacked a center guide. Upper road wheels had their rubber tires removed and were made into steel wheels, while the tank received cast metal idler wheels. 3,774 Ausf.H Panzer IVs were produced between April 1943 and July 1944, and it was eventually succeeded by the Ausf.J. The Tamiya model in 1/48 scale captures every detail and nuance of the real life subject thanks to extensive research of the full size vehicle.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Ger. PzKpfw. 38(t) Ausf.E/F

€22.49

Article number: 300032583 Product: 1:48 WWII PzKpfw. 38(t) Ausf. E/F This is a model of the German light tank 38(t) in 1/48 scale. The 38(t) was designed and entered production for the Czechoslovak Army as the LT vz. 38, however before any could be delivered Germany occupied then divided the country. They rated the tank highly, ordering continued production of the initial lot of 150, renaming it the 38(t) with (t) denoting its Czech origin. It went on to serve as the front-line tank for the Wehrmacht in early WWII, from the initial operations in Poland up to and including Operation Barbarossa, the invasion of the Soviet Union in June 1941. It wielded a 37mm gun with 90 rounds on board, a coaxial 7.92mm MG37(t) machine gun, and another MG37 on the front left of the vehicle. 42km/h was squeezed out of the 6-cylinder engine. Ausf.E/F 38(t) variants featured doubled front armor thickness at 50mm, with 30mm on the hull and turret sides. 525 were produced in the period from November 1940 to October 1941.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Mitsu. A6M3 Zero Fighter T32 Hamp

€16.99

Article number: 300061025 Product: 1:48 Mitsu. A6M3 Zero Fighter T32 Hamp About the A6M3 Type 32 Zero Fighter (HAMP) Much has been written over the years about the Japanese Zero Fighter Aircraft series. Much was based upon hearsay and legend and little upon fact itself. Even the Allied Forces and governments refused at first to acknowledge its existence, and when they did get a copy of it, they could hardly believe the performance it produced. The prototype zero or A6M1 first took place on paper on January 17, 1938, following the Japanese request for a shipboard fighter with a top speed of 27o kph at 12000 ft 7 6-8 hours of cruise economy endurance and 1.5-2 hours at normal combat speeds. Armament was to be two 20mm cannon and two 7.7mm machine guns plus the normal radio equipment and direction finding gear. These specifications wee so far from the existing state of the art that the famous Nakajima Company dropped out of competition, stating that they were impossible to meet. That left Mitsubishi Heavy Industries and their design team headed by Jiro Horikoshi the only company to tackle the problem. First flight was on 1 April 1939 and combat trials were concluded in July 1940 with 15 pre-production A6M2's sent to two squadrons by the end of the month. These aircraft had folding wing tips to accommodate aircraft carrier elevators, and were the ones first seen by Gen. Chennault in China, and at Pearl Harbor in December 1941. Although the A6M2 met or exceeded original design specifications, modifications were taking place at the Mitsubishi factory to improve roll rate, speed up handling aboard carriers, and utilize the uprated Sakae 21, 1,130 hp engine. The first A6M3 type 32 (code named HAMP) took to the air on 15 July 1941 with production beginning in April 42. A total of 343 aircraft were produced by August 43, when the type 52 A6M5 began production. The Type 32 Zero had the most radical change in the entire series and was readily recognized by its squared off wing tips. This reduced total span to exactly 11 meters and eliminated the cumbersome folding tips which consumed time during combat to get the aircraft down carrier elevators. The larger Sakae 21 engine gave the type 32 a better rate of climb and the shorter wing span (1 meter shorter) lessened stick forces and increased roll rate. The Hamp was utilized throughout the war, but saw most of its service off of land based installations in the southern island chains of New Guinea and the Phillipines.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Sd.Kfz. 251/1 Ausf.D Halftrack (2)

€31.99

Article number: 300032564 Product: 1/48 Sd.Kfz.251/1 Ausf.D Halbkette (2) Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece of their mechanized corps throughout WWII. The half-track could drive on difficult terrain and could easily tow various kinds of trailers and cannons. The Ausf.D was designed for ease of production and various types were produced, including those equipped with wireless radios and gun turrets. However, the basic version was the troop carrier which seated 12and came armed with two MG42 machine guns. The half-track could be seen at every front and had an on-road top speed of 53km/h and a 300km operational range. Length: 126mm, Width: 48mm. As there were many variations of the Ausf.D, this 1/48 assembly kit model of the GermanMtl.SPW. Sd.kfz 251/1 Ausf.D Schutzenpanzerwagen depicts a personnel carrier. Parts such as the interior and undercarriage have been accurately reproduced with less parts for easy assembly. The included assembly type tracks have a realistic sag effect. A commander figure wearing a winter uniform and a soldier figure carrying a MG42 machinegun on his shoulders are included. (Total 2) Accessories such as the Panzerschreck, grenade cases, infantry equipment and so onare also included in this set. Three kinds of decals depicting Normandy and the Eastern front units are included. Model kit, Scale 1:48, Vehicle, 2 Figures, Manual, Decal, Length 126 mm.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 US M1A2 Abrams

€34.99

Article number: 300032592 Product: 1:48 US M1A2 Abrams This small-scale Military Miniature series model assembly kit recreates the formidable modern U.S. Main Battle Tank M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock-full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola, and more, and saw action in the conflict in Iraq in 2003.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 US M4A3E8 Sherman Easy Eight

€28.99

Article number: 300032595 Art.bezeichnung: 1/48 Easy Eight • This is a 1/48 scale plastic model assembly kit. Length: 156mm. width: 62mm. • Aside from accessories, this is a completely new tooling. • In-depth surveys of actual vehicles provided the inspiration for this highly accurate kit in compact scale. • Slide molded parts artfully capture different surface textures of cast turret and welded upper hull panels. • Wide, single-pin T66 tracks are assembly type with one-piece straight sections. • Four hull weights give the model an authentically weighty feel. • Comes with a commander torso figure and 2 marking options (given below). • Option A: 5th Armored Division, Germany, April 1945 • Option B: 4th Armored Division, Bastogne, Belgium, January 1945

Model aircraft kits 1:48

1:48 US P-38 F:G Lightning

€75.99

Article number: 300061120 Product: 1:48 US P-38 F:G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.

Model aircraft kits 1:48

1:48 US Vought F4U-1A Corsair

€28.99

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 WWII Tank Destroy.38t Hetzer Mid.P.

€27.48

Model kit, Scale 1:48, Vehicle, Manual, Decal, Length 131 mm.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda CB750F 1979

€104.99

Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda CRF 1000L Africa Twin Enduro

€254.99

Article number: 300016042 Product: 1:6 Honda CRF 1000L Africa Twin Enduro This large-scale motorcycle series model depicts the CRF1000L Africa Twin, Honda's modern adventure touring motorcycle inspired by their legendary 4-time Paris-Dakar champion off-road bike. The CRF1000L was released in 2015 and boasts a 998cc parallel-twin engine with a reported 92hp, plus an array of technology such as dual clutch transmission, selectable torque control for slippery surfaces, and ABS brakes. This assembly kit captures the bikes most minute detail in every way. It is sure to wow the most discerning model enthusiast at this very large scale!   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.65mm OD Bla 2m

€4.49

Article number: 300012676 Product: 1:6/1:12/1:24 Cable 0.65mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,65mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.8mm OD Bla 2m

€4.49

Article number: 300012677 Product: 1:6/1:12/1:24 Cable 0.8mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,80mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model ships 1:700

1:700 Jap. Shinano Aircraft Carrier WL

€34.99

Article number: 300031215 Product: 1:700 Jap. Shinano Aircraft Carrier Waterline In October 1944, the Shinano was launched, one of the largest aircraft carriers of World War II. The construction of the giant Yamato-class ship began shortly after the Japanese defeat at Midway and was completed in November 1944. The total length of the Shinano was 266 meters, the carrier had a displacement of 62,000 tons. From the Yamato the Shinano inherited the strong armor as well as a reinforced flight deck that could withstand a direct explosion of a 500 kg bomb. Before its first deployment – on the way to an equipment quay – the vessel was discovered and torpedoed by an American submarine. Shortly afterwards the Shinano capsized near the shores of Shionomisaki. The Shinano is still the largest warship sunk by a submarine.

Model ships 1:700

1:700 Jap. Yamato Schlachtschiff WL

€30.99

Japanese Battleship Yamato

Model ships 1:700

1:700 US Enterprise Aircraft Carrier WL

€17.99

Article number: 300077514 Product: 1:700 US Enterprise Aircraft Carrier WL The USS Enterprise CV-6 was the second Yorktown-class ship and entered service as the sixth aircraft carrier of the US Navy in 1938. In the Pacific War she was involved in 18 of 22 major naval operations. 15 times she was badly damaged, but the USS Enterprise kept returning to service, symbolizing the Navy's determination to achieve victory in the Pacific. In 1947 the USS Enterprise, affectionately known as the "Big E", was decommissioned and finally scrapped from 1958 to 1960. To this day she is the most decorated ship in the history of the US Navy. The TAMIYA model kit shows the famous aircraft carrier as it looked towards the end of World War II, including increased AA armament and Hellcat, Corsair, Avenger and Helldiver aircraft.

Model ships 1:700

1:700 US Hornet Aircraft Carrier WL

€18.79

Article number: 300077510 Product: 1:700 US Hornet Flugzeugträger WL The USS Hornet was completed in 1941 as the third Yorktown-class aircraft carrier. She is best known for her central role in the so-called Doolittle Raid on April 18, 1942, the first US air attack on the Japanese home islands. Only a few months later, in October 1942, the Hornet was badly damaged by Japanese bombers in the battle of the Santa Cruz Islands. She finally sunk on October 27th. Most of the crew could be rescued by the American escort ships, but 111 men died. The detailed TAMIYA model kit contains the aircraft carrier as well as parts for 16 B-25 bombers.

Model aircraft kits 1:72

1:72 F-35B Lightning II

€45.99

Assembly kit, 1/72th scale, Length: 215mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp

€21.99

Article number.: 300060784 Product: 1:72 Mits. A6M3 Zero Fighter Mo. 32 Hamp The 1/72 scale Warbirds Collection welcomes the A6M3 Zero fighter Model 32, which was codenamed ‘Hamp’ by American forces. The Model 32 was an evolution of the Model 21; it received an improved Sakae 21 engine and shorter, redesigned main wing, with the effect that its top speed increased by 11km/h and it also had improved roll and diving speed, albeit at the cost of increased fuel consumption. In fact, this plus with the Model 32’s smaller fuel tank meant its range was some 1,000km shorter. The Model 32 made its maiden flight on July 15th 1941, and first saw service with the 2nd Fighter Group in Rabaul, the Philippines. All told, 343 Model 32 aircraft were manufactured, a number so low in part due to the range limitations of the aircraft. About the Model • This is a 1/72 scale plastic model assembly kit. • The model faithfully replicates the form of the A6M3 Zero Model 32 with square-shaped wings. • Main wing, fuselage, and engine cowl are all newly-designed parts. • Features such as flaps integrated with wing parts make this model easy to build while still retaining an excellent grasp of the aircraft’s details. • 3 sets of markings included.

Model aircraft kits 1:72

1:72 Mitsubishi A6M2b Zero (Zeke)

€27.99

Article number: 300060780 Product: 1:72 WWII Mitsubishi A6M2b Zero (Zeke) From the early days of the Second Sino-Japanese War to the end of hostilities in the Pacific, the Mitsubishi Zero served as the Imperial Japanese Navy's main frontline fighter. The first major mass-produced version was the A6M2b, which was equipped with 50cm folding wingtips, landing hook, and radio direction finder for carrierbased operations. Flown by expert pilots, the A6M2b took part in daring operations such as the Pearl Harbor attack and the invasion of the Philippines. It's 3,000km range, powerful 20mm cannon armament, and legendary maneuverability quickly earned the respect of Allied aircrews. The Tamiya model assembly kit faithfully reproduces this historic warplane in 1/72 scale. About the model - 1/72 scale plastic assembly kit. - New tooling for wing, fuselage, and engine cowling. - Wing is depicted in extended position only. - One-piece engine cowling via slide molding manufacturing process. - Detailed cockpit and landing gear wells. - Comes with 3 decal marking options to depict aircraft that took part in the Pearl Harbor Attack.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Supermarine Spitfire Mk.I

€15.99

Article number: 300060748 Product: 1:72 SUPERMARINE SPITFIRE MK1 The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin' liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire's combat action in thwarting Germany's attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter's pride of place in the minds of England's men and women forever. Supermarine Spitfire Mk.I   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Braided Hose 2.6mm Outer Dia

€6.19

Model car kits 1:24

Carbon Decal Plain EF

€8.19

Article number: 300012680 Product: Carbon Decal Plain EF Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon look, 1/6th, 1/12th and 1/24th scale carbon Structure smooth/extra fine, 130x 190mm sheet size, instructions.

Model car kits 1:24

Carbon Decal Plain F

€8.19

Article number: 300012679 Product: Carbon Decal Plain F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon look, 1/6th, 1/12th and 1/24th scale carbon Structure smooth/fine, 130x190mm sheet size, instructions.

Model car kits 1:24

Carbon Decal Twill F

€8.19

Article number: 300012681 Product: Carbon Decal Twill F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/fine, 130x190mm sheet size, instructions.

Model aircraft kits 1:72

Kawanishi Shiden Type 11

€14.79

Article number: 300060768 Product: 1/72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailed Plastic Kit of model Kawanashi Shiden Type 11 in scale 1:72   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Mitsubishi GTO Twin Turbo

€26.99

Model car kits 1:24

Nissan 300ZX Turbo

€26.99

Model car kits 1:24

Nissan Silvia K's

€18.99

Model car kits 1:24

Subaru Impreza STi WRX

€25.99

Model car kits 1:24

Subaru Impreza WRC 98

€26.99

Model motorcycle kits 1:12

Szuzuki GSX1100S Katana

€24.99

Article number: 300014010 Product: 1:12 Suzuki GSX1100S Katana Making its exciting debut in 1980 at the IFMA trade show in Cologne, Germany and later released to the public in 1981 was the Suzuki GSX1100S Katana. The aggressive form of the Katana designed by Hans Muth is reproduced by this plastic model assembly model kit. The mechanical mood of the 4-cylinder DOHC engine, along with ignition cords, brake pipes, and instrument cables which are reproduced with vinyl tubing, has been precisely captured. In addition, metal screws are included to provided extra strength to parts such as the wheel axles. Solid synthetic rubber tires front and rear have tread patterns, and are mounted onto accurately reproduced renderings of Suzuki's famed star-shaped die-cast wheels to provide the model with a highly realistic presence.

On-road RC cars (2WD/4WD)

Tamiya RC Honda Bundle

Product bundle consisting of: 1:10 RC Honda NSX Racing Whi PB TT-02 / Tuning set TT-02 / 1:10 wheel set 14 Sp.Design (4) black Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.   Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set short (4), Ball bearing set (16)   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

The Bigwig (2017)

€229.99

Article number: 300047330 Product: The Bigwig (2017) Tamiya is delighted to announce the comeback of a classic – The Bigwig (original Item 58057), which was a 4WD buggy released back in 1986 to commemorate 10 years of Tamiya R/C models and was the first Tamiya car with a body penned by an outside designer: Japanese full size race car designer and team owner Takuya Yura. This re-release version is based closely upon the original, with some tweaks to bring it up to date. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 234mm, height: 163mm. • Aerodynamic body is lightweight and durable polycarbonate. Engine and exhausts are depicted by chassis parts. • Utilizes a sturdy ABS resin bathtub-type chassis. • Shaft-driven 4WD drivetrain for excellent stability off-road, with full ball bearings ensuring minimal power loss. • 4-wheel double wishbone suspension with CVA oil dampers lets the car tackle bumpy surfaces with confidence. • Rack and pinion steering (the only of its kind on a Tamiya model) gives excellent driving feel. Boots cover the steering tie-rods, and anti-wear grease is included in the kit to seal the mechanism from dirt and gravel. • "Aerodish" 1-piece wheels are combined with oval block pattern tires for superior grip. • Stickers have been redesigned while keeping to the overall theme of the original. • Includes a GT-Tuned motor (25T) with sticker unique to this model. • ESCs 22mm and lower in height can be fitted in the kit standard position. • Utilizes the 25T GT-Tuned Motor. • For use with Tamiya 7.2V and 6.6V LF battery packs. • Sticker designs updated but keep the air of the original. • For use with electronic speed controller. • Anti-wear grease included to better protect rack and pinion.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1/12 Kawasaki Ninja H2 Carbon

€52.99

Article number: 300014136 Product: 1/12 Kawasaki Ninja H2 Carbon Beast on the Streets 2014 was a vintage year for fans of Japanese motorcycle manufacturer Kawasaki as it saw the announcement of the Ninja H2 at the Milan Motorcycle Shows (EICMA), a bike whose name can be traced back to 1971 and the popular 750-SS/Mach IV (H2) street bike. In the modern H2, Kawasaki designers strove to provide hitherto unexperienced acceleration, and they certainly pulled out all the stops with a powerful combination of a 998cc inline-4 engine and centrifugal supercharger, mounted in an elegant trellis frame and providing an impressive 200hp. The body is also a work of aerodynamic art, with an upper cowl featuring ram air intakes and bottom chin spoiler plus a stylish single headlight. Mirrors have a cut-off design to ensure they contribute aerodynamically, and plenty of electronic rider aids are also on offer. The special Carbon spec of the Ninja H2 released in 2017 had carbon fiber upper cowl, an enhanced 205hp engine and many other upgrades. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 174mm, width: 76mm, height: 96mm. ★Features a realistic depiction of the inline-4 engine and supercharger. ★H2 road bike spec upper cowl with headlight and mirrors, side cowls and rear cowls really capture the bike's aerodynamics in style. ★Metal-plated parts are used to recreate muffler, light cases and more. ★Synthetic rubber tires are given authentic tread patterns. ★Cowls, engine and swingarm are attached to the frame via screws. ★The Kawasaki "river mark" logo is rendered beautifully by a metal transfer. ★Clear parts are employed for headlight and taillight sections. ★Masking stickers are included to aid with demarcation in the painting of the fuel tank.

Model motorcycle kits 1:12

1/12 Yamaha YZF-R1M

€49.99

Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.　

Model car kits 1:24

1/24 Lotus Europa Special

€45.99

Article number: 300024358 Product: 1/24 Lotus Europa Special This is a welcome first re-issue in ten years for our model of the Lotus Europa Special (previously Item 24212), with a number of updates to the kit. The Europa is a lightweight masterpiece of a sports car packed with features more likely seen on a racing car in its era: a sleek, low body, midship mounted engine and FRP frame components. Europas were manufactured between 1966 and 1972, and the Special was the final version of the car. It had a "big valve" 126hp 1,558cc four cylinder engine, five-speed transmission and alloy wheels. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 168mm, width: 73mm. • The honed Europa design and low body are authentically captured in 1/24 scale. • With the removal of the hood, the engine can be viewed even after completion. It features twin carburetor, 5- speed transmission, and shift linkage in the rear, plus new air funnels. • New parts are included for a rear wing and RS Watanabe option wheels. • Y-shaped backbone frame is molded together with rear radius arms as one piece. Front double wishbone suspension, stabilizer, rear upright, and engine are all attached onto this frame. • The floor is directly attached to the built up frame, and the body is mounted on top. • Features redesigned decals, plus new photo-etched parts (front grille) and seatbelt stickers. • A new instruction manual is planned. • A realistic cockpit sports instrument panel, high backed seats, 3-spoke steering wheel, and short gear shift. • Lotus logo, emblems and mirror surfaces are recreated by metal transfers.

Model car kits 1:24

1/24 Mazda MX-5

€47.99

Article number: 300024342 Product: 1/24 Mazda MX-5 2015 saw the debut of the 4th generation Mazda Roadster (MX-5), the iconic car with a heritage dating back to 1989. This dynamic lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North America) engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. Tamiya has faithfully captured the NEW roadster in 1/24 scale! Details include; option to choose left or right hand drive, soft top in folded position and highly detailed interior.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 TOYOTA GR Supra

€44.99

Article number: 300024351 Product: 1:24 TOYOTA GR Supra The latest addition to the long-running 1/24 Sports Car Series is a stunner – Toyota’s brand new GR Supra, which joins its R/C cousin (Item 58674) in the Tamiya catalog. Upon its global announcement in January 2019, the TOYOTA GR Supra created a worldwide buzz. Designed with beautiful balance, it provides superlative handling and stable corners, while the sensuous long nose, short deck form has a striking double-bubble roof. Combined with impeccable power from a turbocharged inline-six or inline-four engine, the GR Supra is set to define the next generation of performance. • This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. • The dynamic lines of the body are rendered with stunning accuracy. Bumper, A pillar, front grille and other parts are molded separately for a sharp finish. • Features console and dashboard, and seats with separate headrest components. • Can be assembled as Japan, U.S. or Europe spec, with dedicated left- and right-hand drive part positions. • A detailed underside shows off the exhaust system, plus multi-part front and rear suspension. • Features the 19-inch wheels exclusive to the top grade RZ car in Japan. They are two-part designs with separate metal-plated and black components. Tires have realistic tread. • Includes metal transfers, plus masking stickers for window areas.

Military figures & Accessories 1:35

1/35 Africa Luftwaffe Art Crew

€15.49

Article number: 300035343 Product: 1/35 DAK Luftwaffe Artillery Crew Increase your diorama options even further with this handy figure and accessory set. It contains parts which were previously only released as components of a larger kit in Items 35283 and 32408. They depict soldiers from an anti-aircraft artillery crew belonging to the Luftwaffe in Rommel’s famed Africa Corps. These men were usually assigned to an 88mm gun and in fact required to take on not only airborne targets but also heavily armored land vehicles such as the Matilda and M3 tanks. Technische Details: Detailed Plastic Kit of Model 1/35 Africa Luftwaffe Art Crew in Scale 1:35   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Brummbaer Late Production

€56.99

Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Ger.Pioneer & Goliath Set

€19.29

Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

Military figures & Accessories 1:35

1/35 Hummel Metal Gun Barrel

€12.79

Article number: 300012688 Product: 1/35 Hummel Metal Gun Barrel ★Add even more detail to your 1/35 scale model of the German Self-Propelled Howitzer Hummel (Late Production) with this piece! ★The barrel is made from turned aluminum, and even features fine rifling detail at the tip.

Military model vehicles 1:35

1/35 M3 Stuart Late Production

€40.99

Article number: 300035360 Product: 1:35 US M3 Stuart Späte Produktion This 1/35 scale model faithfully depicts the M3 Stuart tank. It is a complete new kit with updated details compared to the Stuart model that has been offered for decades. The M3 Stuart was manufactured from March 1943 onwards and deployed not only by U.S. forces; it also saw action in Soviet colors. The late production variant of the tank had a rounded turret design with the cupola removed. It used a 37mm main gun, with numerous 7.62mm machine guns: one coaxial to the main gun, one on the front, on the turret and in the side sponson’s on certain variants.

Military figures & Accessories 1:35

1/35 Sheridan Metal Barrel w/ PE-Parts

€17.99

Article number: 300012687 Product: 1/35 Sheridan Metal Barrel w/ PE-Parts Add even more realism to your Vietnam War-era M551 Sheridan with this detailed set including precision gun barrel and photo-etched parts! • Aluminum Gun Barrel x1 • Photo-Etched Part Frets x2 • Turned aluminum depiction of the powerful 152mm gun/launcher barrel features very sharp detailing and no need for cleaning up of seams, etc. • Photo-etched parts recreate anti-RPG net and hull-top engine grilles for a superbly realistic finish. • Compatible with item 35365 US Airborne Tank M551 Sheridan.

Military model vehicles 1:35

1/35 US M10 Mid Production

€52.99

Article number: 300035350 Product: 1/35 US M10 Mid Production This is a model of the famed M10 Tank Destroyer, a subject also covered in the 1/48 scale Military Miniature series. This largely newly-tooled model (only machine gun and clear parts are taken over from existing models) gives it the glorious detail of the larger 1/35 scale. The astonishing success of German armor tactics in 1940 prompted U.S. forces to adopt a doctrine requiring dedicated new tank destroyers to counter them. After going down a few different design routes at the start of the process, they eventually hit upon the highly successful M10 design with well-sloped (if rather thin, to keep the vehicle light and maneuverable) armor plate, and the highly capable 3-inch (76.2mm) gun. Over 4,900 were produced, and took part in Operation Torch (the invasion of N. Africa), as well as fighting in Italy and the advance upon Germany that would bring the exhausting conflict to a close. About the model 1/35 scale plastic model assembly kit. Length: 196mm, width: 88mm. Intensive study and measurement of the M10 in the tank museum at Saumur led to this highly detailed depiction of its form complete with sloped armor, right down to auxiliary armor bosses. The open top on the distinctive turret allows viewing of the 3-inch gun breech and realistic interior. Compare and contrast depictions of surface textures such as the cast mantlet and differential cover versus the welded armor plate of the turret sides and upper hull. Belt-type parts recreate T51 tracks. Driver's hatch can be attached in open or closed position, and features periscope depiction. Comes with 3 figures (commander, loader, gunner) in realistic pose, plus 2 marking options for recreating M10s belonging to the 601st and 634th U.S. Tank Destroyer Battalions   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Valentine Mk.II/IV

€49.99

Article number: 300035352 Product: 1:35 Brit. Valentine Mk. II/IV This is an all new tooled model of the British Valentine Infantry tank in 1/35 scale. British armor doctrine in the 1930s up to the outbreak of WWII called for 2 types of tank - more mobile cruiser tanks and heavy, slow infantry tanks. The Valentine was a prolifically produced example of the latter (7,315 units, more than 30% of British tank production in WWII). It was based upon existing cruiser tank designs and relatively easy to manufacture, a critical point for the British military after it had lost so much material during the Dunkirk evacuation in 1940. The Valentine would see extensive action in North Africa, particularly the Mk.II and Mk.IV variants (they had different engines) depicted by this kit. Over 4,500 were also handed over to the Soviet Union under the lend-lease agreement, the Red Army using them mainly for recon work.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Wespe Italian Front

€42.99

Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.

Military model vehicles 1:48

1/48 Churchill MkVII Crocodile

€33.99

Article number: 300032594 Product: 1:48 Brit.Pz. Churchill Mk.VII Crocodile This is a 1/48 scale plastic assembly kit model of the British Tank Churchill Mk.VII Crocodile. The Churchill design was the result of a chastening experience for British forces in early WWII, a more modern design that could be produced quickly to make up for armor shortfalls after the Dunkirk evacuations. The Mk.VII variant was up-gunned with a 75mm gun and had improved armor up to 152mm thick! The Crocodile is one of the most notable "special" variants of the Churchill. It had an 80-plus meter range flamethrower in place of the front machine gun, towing its fuel and compressed nitrogen propellant in a trailer behind.

Model aircraft kits 1:48

1/48 F-35A Lightning II

€97.99

Article number: 300061124 Product: 1/48 F-35A Lightning II Here is an outstanding entrance into the legendary 1/48 Aircraft Series: this time, the A variant of the Lockheed Martin F-35 Lightning II. The F-35 - variant A for the Air Force, B for the Marines and C for the Navy – was developed under the Joint Strike Fighter Program (JSF), and is seen as one of the fifth generation fighters. These aircraft possess highly advanced stealth characteristics and network connectivity, plus superior situational awareness provided by numerous integrated sensors. The F-35 Lightning II was first delivered in 2015, and deployment of over 3,000 F-35s is planned around the world. Inheriting the Lightning appellation from the famed P-38, the F-35 will lead worldwide air arms for many years to come.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Heavy Tractor SS-100

€25.99

Article number: 300032593 Product: 1/48 Heavy Tractor SS-100 This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing all sorts of subjects including artillery pieces, aircraft, and even V2 rockets, as well as recovering broken down vehicles.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Howitzer MotorCarriage M8

€22.49

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen DS Blue PB MB-01

€174.99

Article number: 300047502 Product: 1:10 RC Citroen DS MB-01 Blau Lack. Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better known cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Club Pai. MB-01

€174.99

Article number: 300047501 Product: 1:10 RC Alfa Rom. Giulia Club lack.MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Spr. Club MB-01

€164.99

Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack. About the MB-01 chassis　 The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC AQROSHOT (DT-03T)

€134.99

Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi R8 LMS 2008 TT-02

€169.99

Tamiya welcomes another racing car – this time, the Audi R8 LMS 2008 – paired with our popular TT- 02 chassis. Based upon the Audi sportscar R8 and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-liter V10 midship engine capable of over 500hp was mounted in a lightweight aluminum space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi V8 1992 Touringcar (TT-02)

€159.99

Article number: 300058699 Product: 1:10 RC Audi V8 1992 Tourenwagen (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Warning notices! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC BBX 2WD Buggy BB-01

€339.99

Article number: 300058719 Product: 1:10 RC BBX 2WD Buggy BB-01 Tamiya is proud to announce a brand new 1/10 R/C 2WD off-road buggy model featuring the combination of classic design and modern performance. Its brand new chassis is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by the full-size UTVs. The new body is designed by famed Japanese artist Atsushi Arino. Included: 2WD assembly Kit, BB-01 Chassis, Polycarbonat body with driver, CVA oil dampers, oil filled diff, Monocoque chassis frame, ball bearings WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Buggy Sand Scorcher 2010 2WD

€394.99

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Citroen DS MB-01

€154.99

Article number: 300058734 Product: 1:10 RC Citroen DS MB-01 Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknown cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Dark Impact 4WD Buggy DF-03

€219.99

Article number: 300058370 Product: 1/10 RC Dark Impact 4WD Buggy DF-03 This 1/10 scale 4WD buggy is specially designed to excel in off-road buggy racing. It features a mid-rear mounted motor and longitundinally mounted battery for optimum balance for jumping. Battery is inserted through the bottom of the chassis, eliminating need to remove body, which makes routine maintenance easy and quick. High performance shaft drive 4WD combines with suspension system featuring extra long suspension arms for improved stability and off-road handling. About the Model - High performance 1/10 4WD buggy chassis designed   for off-road racing - 4-wheel independent double wishbone suspension   features CVA oil dampers and extra long suspension   arms for improved stability and handling - Includes sealed diff gearbox indispensable for off-road running - Features full ball bearings - Electronic Speed Controller (Not Included) - Includes 540 type motor - Newly designed off-road tires and wheels featured larger   diameter and width, and new tread pattern designed for   excellent running and control on hard dirt tracks - Tires: High Density Spike Tires K (4WD/Front, 62/25),   HighDensity Spike Tires K (Rear, 62/35) - Wheels: Large Dish Wheels (4WD/Front, 62/25),   Large Dish Wheels (Rear 62/35) - 2.94 internal gear ratio.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC F104 PRO II w/Body

€254.99

Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat 131 Abarth Olio Fiat MF-01X

€184.99

Article number: 300058723 Product: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Fiat Abarth 1000TCR MB-01 paint.

€169.99

Article number: 300047492 Product: 1:10 RC Fiat Abarth 1000TCR MB-01 Lack. Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The body is pre-painted.The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.