Tamiya Product Range

Military model vehicles 1:35

1:35 BW Flak-Panzer Gepard (1)

€26.49

Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Ger.SdKfz.171 Panther A (2)

€21.99

Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911 GT3 RS (992)

€45.99

Assembly model kit 1/24 scale, length: 190mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Citroen DS MB-01

Article number: 300058734 Product: 1:10 RC Citroen DS MB-01 Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknown cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)

€17.99

Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)

€45.99

Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.5mm OD Bla 2m

€4.49

Article number: 300012675 Product: 1:6/1:12/1:24 Cable 0.5mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,50mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.8mm OD Bla 2m

€4.49

Article number: 300012677 Product: 1:6/1:12/1:24 Cable 0.8mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,80mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

1:6/1:12/1:24 Cable 1mm OD Bla 2m

€4.49

Article number: 300012678 Product: 1:6/1:12/1:24 Cable 1mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 1,00mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model car kits 1:24

Braided Hose 2mm Outer Dia

€5.89

Model motorcycle kits 1:12

1/12 Kawasaki Ninja H2R

€58.99

Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 959

€25.49

Article number: 300024065 Product: 1/24 Porsche 959 The Porsche 959 was first unveiled at the 1983 Frankfurt auto show as a study for a full time 4 wheel drive Group B super sports car. Back then, the automobile was still far from being completed and its potential a mystery. The 959's awesome capabilities matured through thorough research and competition experience with the automobile. It demonstrated its outstanding abilities during the grueling Paris-Dakar Rally, and the Le Mans 24 hour endurance race. Porsche has taken their race car technology and put it into the 959, to produce a car that provides every comfort, with smooth running and the low interior noise expected of a road car, while offering high safety reserves. Thus the 959, despite its massive 450hp engine power, can be drive easily at its lower RPM ranges. The 2848cc engine is a descendent of the famous 956 and 962 Porsche Group C racer. It is an air/liquid cooled, flat 6 cylinder, DOHC equipped with two turbochargers, providing a top speed of more than 300km/h. The 959 maintains superb acceleration under all driving conditions, yet it also achieves short braking distances that prove to be a reassuring factor for all classes of drivers. The hollow wheel spokes increase air volume to the brakes and accommodate the fat, low profile Dunlop Denloc tires, and is equipped with a pressure sensor to detect punctures. The Porsche 959 is the car that raised the standard of sports car thinking to a new plateau, by exceeding every known yardstick of handling and performance.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)

€22.99

Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.

RC buggys (2WD/4WD)

1:10 RC 2 WD Holiday Buggy 2010 DT-02

€144.99

Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 The Holiday Buggy was one of Tamiya’s classic R/C car kits from the 1970’s. It is available as a re-release assembly kit. The classic body comes mounted on the DT-02 chassis which has its battery pack loaded in the center of the bathtub frame providing excellent handling performance even on rough surfaces. The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control. Note: When installing a regular sized 540 motor, the following parts are required: 17T Pinion Gear (part# 3515005) 3mm Grub Screw (part# 50576) Motor Plate (part# 4305125)   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Volkswagen Beetle 1300 1966

€27.99

Article number: 300024136 Product: 1:24 Volkswagen Beetle 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come. Volkswagen 1300 Beetle   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. MG Team (5) Mid.WWII

€16.79

1/35th scale, assembly kit, 5 Figures   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Carbon Decal Twill EF

€8.19

Article number: 300012682 Product: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/extra fine, 130x 190mm sheet size, instructions.

Model car kits 1:24

Nissan Skyline GT-R R32

€19.99

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Ford GT

€53.99

Article number: 300024346 Product: 1/24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires.   Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Seat Belt Set A

€7.19

Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. Kitmodel, Scale 1:20, 6-Point- Racing Seatbelt, Logosheet, Photo- etchedparts, Manual, Decal.

Model car kits 1:24

1:24 Castrol Toyota Tom´s Supra GT

€26.99

Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan R390 GT1

€36.49

Article number: 300024192 Product: 1/24 Nissan R390 GT1 About the Nissan R390 GT1 One of the most prestigious and grueling racing events held in the world is the "Le Mans 24 Hour Endurance Race". It has brought excitement and pleasure to motorsports enthusiasts worldwide, ever since it was first held in 1923. In 1997 Nissan Motor Co., Ltd. Entered their latest Nissan R390 GT1 which was developed to vie for this renowned racing event. The R390 GT1 took its name from a car, R380, that excited Japanese motor sports enthusiasts over thirty years ago. Jointly developed by Nissan and TWR (Tom Walkinshaw Racing), the R390 GT1 is the state of the art racing expertise of them. Aerodynamically refined low and sleek body styling is suggestive of Nissan's highly competitive Gr. C machines raced during the 1980's. The 3.5 liter V8 engine, producing an awesome 600 horsepower output, is bolted directly to the carbon composite monocoque and works as a load-carrying element. The tremendous power is delivered to the rear wheels via a transversely mounted, six speed transmission. The four wheel double wishbone suspension system is connected to the horizontally mounted shock absorbers via pushrods and bell cranks to provide optimum road handling performance. Three R390 GT1's were entered in to the 1997 Le Mans event and, among them, the car No. 21 achieved a pole position in the pre-qualifying race. Although the overall result was rather discouraging, the R390's outstanding performance, displayed during the early stage of the race, was something to behold and promising for the year to come.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Sand Bags (36+12)

€5.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US Military Equipm.Mod.

€13.19

Article number: 300035266 Product: 1:35 Diorama-Set US Military Equipm.Mod. This 1/35 scale set will allow you to display the equipment seen loaded on modern U.S. military vehicles. In addition to individual equipment such as large and small Alice packs, sleeping bags, and sleeping mats, the set also includes a rich selection of 12.7mm and 40mm ammunition cases, jerry cans, and water tanks. Furthermore, the set also includes ration cartons and CIP (Combat Identification Panel) which can be attached to the U.S. Modern Utility Vehicle. This accessory set includes 25 types of equipment (total of 80 pieces) and is suitable for expanding your modern U.S. military diorama It can be used with support vehicles and frontline tanks.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US/Dt.Jerry Can Set

€5.49

Article number: 300035026 Product: Gear bag 58618 Mt.Beetle This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. ★Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. ★Includes nine each of U.S. and German type jerry cans, plus three each of new and dented barrels.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Tank Ammo Load. Crew (4)

€12.29

Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★ Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★ Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models. Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set US Infant. W-Europe (8)

€7.19

Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 20mm Flakvierling 38

€7.79

Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Halftr. w/4-Bar.AA Gun (5)

€32.99

Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1)   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. IV Ausf. D (3)

€21.99

Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw.IV Aus.G w/Mot. Ea.Fr.

€49.99

Assembly kit, 1/35th scale, limited Set, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig.-Set MG-Crew Maneuver (5)

€12.29

Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Skyline GT-R V-spec II

€24.99

Military model vehicles 1:35

1/35 Ger. Panther Ausf.D

€59.99

Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC TT-02R Chassis Kit

€199.99

Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Included: 4WD assembly Kit, TT-02 Chassis, R Version with Tuning Parts, fully ball bearings, blue anodized parts WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S

Article number: 300014129 Product: 1/12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 McLaren Senna

€64.99

Article number: 300024355 Product: 1:24 McLaren Senna Item Contents/Information • This is a 1/24 scale plastic model assembly kit. Length: 198mm, width: 91mm, height: 60mm. • The sleek aerodynamic body’s form is captured in style. Uniquely, it is composed of a single monocoque part onto which body panels are attached individually, allowing a highly realistic depiction of the car. • Parts are designed to be assembled into blocks of the same color, streamlining the painting process. • Features a realistic depiction of the V8 twin turbo engine and visible sections of the complex surrounding engineering. • The model can be assembled as European, U.S. or Japanese spec. • Separate parts for brake calipers and discs ensure that while the wheels (and brake discs) rotate, the caliper remains stationary for super realism. • The dashboard can be assembled in the standard roadgoing or streamlined racing positions. • Metal transfers recreate McLaren logos and more.

Model car kits 1:24

1:24 Porsche 934 Jägermeister

€52.99

Article number: 300024328 Product: 1/24 Porsche Turbo 934 Jägermeister The Porsche Turbo RSR 934 was a descendent of the world-famous Porsche 911 Turbo, and appeared for the first time in the Group 4 GT class in 1976. The rear-mounted 2,994cc turbocharged flat-6 engine was capable of 260hp, making it a top-of-the-line production car at the time. This model, covered in the famous Jagermeister livery, sped to victory in both the European GT Championship and the German Sports Car Championship in its debut season. The Tamiya assembly kit model faithfully captures all the details of this famous racing car in 1/24 scale. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche Turbo 1988 Roadversion

€35.99

Article number: 300024279 Product: 1/24 Porsche Turbo 1988 Streetversion Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbos impressive design and performance made it the most well known member of the 911 series. About the Porsche 911 Turbo The 911 Turbo debuted in 1975 as Porsches first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbos distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Taisan Starcard Porsche 911GT2 `95

€32.49

Article number: 300024175 Product: 1/24 Taisan Starcard Porsche 911GT2 `95 About the Taisan Starcard Porsche 911 GT Since its debut back in 1964, the Porsche 911 stable has established an unparalleled esteem, both on streets and in competitions. The "GT2" is a race ready version developed for the world's GT racing events. The traditional 911 styling has been aerodynamically refined, yet retains the unmistakable identity of the series. The rear mounted engine is the hallmark of the 911 series, powered by a water cooled, horizontally opposed six-cylinder unit. This 3.6 liter powerplant is coupled with twin-turbochargers, yielding an awesome 400 plus horsepower output. The six speed gearbox efficiently transmits this abundance of power to the rear wheels. Front MacPherson strut and rear multi-link suspension system has a sophisticated geometry for the utmost control during high speed running. The large, 380mm diameter brake disks are ventilated to take the racing abuse. They are equipped with ABS (anti-lock braking system), for the positive stopping power and safety. The unique front spoiler, with its up-turned ends, is the result of thorough wind tunnel testing. A huge, two tier rear spoiler is equipped with air ducts on both sides. The riveted over fenders add to its aggressive looks. During the 1995 Japanese GT Car Championships, Porsche entered a fleet of their GT2's, including three entries from Team Taisan. Each of Taisan's machines scored a victory during the season, bringing the coveted title to the team. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Tank Churchill Mk.VII (6)

€39.99

Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.

Military model vehicles 1:35

1:35 BW MBT Leopard 1A4 (1)

€23.99

Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★ From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★ Notable details include the MG3 machine gun and searchlight. ★ Comes with a commander figure to add even more detail to your finished model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Allied Vehicle Access.

€11.99

Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger. Weapons Inf.(24)

€5.29

Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger.Barrel & Jerry Can

€8.69

Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)

€7.59

Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. III Ausf. L (1)

€43.99

Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.173 Jagdpanther Late.(1)

€39.99

Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 MBT Leopard 2 A7V

€59.99

Article number: 300035387 Product: 1:35 KPz Leopard 2 A7V Nearly twenty years since the release of Item 35271 (1/35 Leopard 2 A6) in 2004, Tamiya is proud to welcome the Leopard 2 A7V with totally new parts into 1/35 Military Miniature Series. The Leopard 2 A7V is an improved version of A7 (A7 is improved version of A6 and the "V" in the A7V designation stands for "verbessert" (improved) ), and features additional hull front armor and side skirts for improved defense. The suspension was also improved to help deal with the tank’s extra weight. The A7V inherits the A6’s L/55 120mm gun, but with the updated shell, the A7V can take on enemy armor up to five kilometers away. Units began receiving the A7V in September, 2021 and A7Vs saw further improvements such as turret-top stowage boxes and main sight visor. It seems with that this venerable tank’s 40-year career is set to carry on into the future thanks to its continued evolution. 1/35th scale, assembly kit, Model of the Leopard 2A7V, tools, paints and glue required   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M113 A.P.C Personal Carrier (5)

€26.49

Article number: 300035040 Product: 1:35 US M113 A.P.C Personal Carrier (5) The M113 is one of the vehicles most widely used in non-communist countries of the world and is showing activity as transport for infantrymen of free nations. Among the important features of the M113 are smallness, lightness, and therefore easiness to use. It is designed as a light armoured personnel carrier for transporting 13 fully armed riflemen including the driver, but also serves as a cargo boat, ambulance, weapon carrier, command car and reconnaissance car.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M113A2 Personal Carr. Desert (2)

€41.99

Article number: 300035265 Product: 1:35 US M113A2 Personal Carr. Desert (2) About the U.S. M113A2 Armored Personnel Carrier Desert Version Of the various M113 type personnel carriers developed, the M113A2 began production in June 1979. Based on combat experience in Vietnam, this version was made with improved transmission, operating equipment and cooling system as well as reinforced suspension. Detachable fuel tanks were moved to the rear and external sides of the vehicle, smoke dischargers were mounted on the front, and the trim vane was enlarged. M113A2 units were deployed to the Gulf War in 1991, and in the 2003 Iraq War. M113A2s active in Iraq were also equipped with Combat Identification Panels (CIP), the latest friend and foe recognition device to prevent friendly attack. About the Model ★Overall length 153mm ★Large trim vane, smoke shell launcher, and external fuel tanks have been accurately replicated. ★CIP attached on both sides. ★Gun shield can be attached to M2 machine gun. ★Plenty of extra attachments including personnel equipment and ammo cases. ★Commander and driver figures included Decals for 3 different vehicles deployed to Iraq and one vehicle deployed to Bosnia-Herzegovina.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Sherman M4A3 75mm Late (9)

€43.99

Article number: 300035250 Product: 1:35 US Sherman M4A3 75mm Late (9) About the Model ★Plastic assembly model kit based on the main tank of the WWII U.S., the M4 Sherman. ★Overall length: 172mm, overall width: 76mm. ★The smooth form of the cast turret with 75mm gun and welded hull of this late production M4A3 tank overflow with realism. ★Two kinds of commander's cupolas; loader's hatch and other hull and turret hatches can be modeled in the open or closed position. ★Two kinds of road wheels and sprockets can be selected; rubber padded tracks also included. ★Three crewman and one tank commander in realistic poses bring an air of excitement to the kit. ★Included equipment includes ammunition boxes, tripod, ration boxes, and much more. ★Three types of decals included.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Diorama-Set Tent w/Radio(1)

€6.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Jerry Can Set (12) Early

€6.99

Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Zimmerit Dekor-Satz Tiger I

€11.29

Article number: 300012647 Product: 1/35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved.

Model ships 1:350

1:350 Musashi 2013

€114.99

Article number: 300078031 Product: 1:350 Musashi 2013 Jap. Battleship The Musashi was the second ship in the Yamato-class which were the largest battleships ever built. Completed in 1942, the Musashi took part in various campaigns before finally meeting her fate at the hands of U.S. Navy aircraft in the Battle of Leyte Gulf. Tamiya"s precision-made assembly kit model recreates this giant battleship in exquisite detail, including her defensive anti-aircraft suite of numerous single 25mm cannons on the main deck. This different anti-aircraft armament makes for an interesting comparison with the Yamato. Tamiya rereleased Musashi in 1981 and this great model kit is available again with new mast parts. - Comes with a display stand. - Comes with newly-designed mast parts.

Model ships 1:350

1:350 WWII Ger. Battleship Bismarck

€82.99

1/350 Bismarck

Model aircraft kits 1:48

1:48 US North American P-51D Mustang

€29.99

Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Ger. Messerschmitt Bf109E-3

€15.99

Article number: 300060750 Product 1:72 Ger. Messerschmitt Bf109E-3 Without a doubt, the Messerschmitt Bf109 can be clamed as the most famous and successful German aircraft from the WW2. It was the world´s most advanced fighter at that time of its debut in 1936, and remained as the standard fighter for the Luftwaffe throughout the conflict. Created by the brilliant designer Willi Messerschmitt, it had the smallest possible air frame built around the most powerful engine available. It also boasted many of the then innovated features such as an all metal stressed skin construction, retractable main landing gear. Automatic Handley-Page leading edge slats, etc. The Bf109 saw the first combat during the Spanish Civil War and fully demonstrated it exceptional maneuverability, inherited from its precedent Bf108 Taifun (Typhoon) multi-purpose sports plane. The Bf109 underwent numerous improvements throughout its carrier, and mass production of the E variant started late in 1939. Within one year, about 2,000 "E" aircraft were rolled out. Its excellent performance greatly contributed in the active service of German pilots at the Western Front and during the "Battle of Britain". The E-3 version used and improved Daimler-Benz DB601Aa engine capable of 1,100 h.p. output. This engine had provision for mounting a 20mm MG FF cannon on the crankcase and firing through propeller hub. The Messerschmitt Bf109E was one of the best fighters of the early WW2 period, on a par with the British Spitfire. Detailed Plastic Kit of model Messerschmitt Bf109E-3 in scale 1:72   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Braided Hose 2.6mm Outer Dia

€6.19

Model aircraft kits 1:72

Kawanishi Shiden Type 11

€14.79

Article number: 300060768 Product: 1/72 Kawanashi Shiden Type 11 Evolving from the Kawanishi N1K1 "Kyofu" floatplane, the Imperial Japanese Navy's N1K1-J Shiden had a unique pedigree amoung WW2 landplane fighters of the world. In January 1942, the Kawanishi Aircraft firm began adaptation of the Kyofu into a land based fighter, strictly as a private venture. This project was soon officially authorized under the designation N1K1-J, with the first prototype flying in December 1942. The airframe was basically the same as its predecessor, with main landing gear and tall wheel replacing the floats. In place of Kyofu's Mitsubihi Kasei engine, a more compact and powerful Nakajima Homare engine was installed. Excellent performance and superb maneuverability was achieved using this engine, however it brought about serious problems. In order to use all of the available power in the engine, a large diameter propeller was required. This required unusually long main landing gear legs, because of the midwing configuration. This caused difficulties in the landing gear retraction system. Kawansihi engineers managed to solve the problem by introducing telescopic main landing gear legs. The complex gear system and unreliability of the engine, plagued the N1K1-J throughout its career, until the introduction of the improved, low-wing N1K2-J Shiden-Kai. About 1,000 N1K1-J fighters were produced and were active around the Phillipine islands, Formosa, Okinawa and over the Japanese Island of Honshu. Detailed Plastic Kit of model Kawanashi Shiden Type 11 in scale 1:72   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

SEIRAN

€13.99

Article number: 300060737 Product: 1:72 SEIRAN This is a plastic model assembly kit of the Japanese Navy's special attacking machine, Harumi, developed for an unprecedented strategy of starting from catapult of a large submarine and launching a surprise attack. Faithfully reproduced a unique style fitted with a tightened nose or twin float equipped with an air-cooled engine. 800kg Movement dollies are also convenient for bombs and exhibitions. I printed a decal for the machine number of 6 aircraft. It would be interesting to explore the sunny storm that ended the war before the actual battle participation, by modeling its unknown ability. Detailed Plastic Kit of model SEIRAN in scale 1:72   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Toyota Bundle

Product bundle consisting of: 1:10 RC Toyota GR 86 (TT-02) / PS-5 Black Polycarbonate 100ml / PS-60 Bright Mica Red Pc.100ml / PS-31 Clear Smoke Polycarbonate 100ml   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Lotus Super 7 Series II

€29.99

Article number: 300024357 Product: 1/24 Lotus Super 7 Series II The Super 7 is a legendary kit car that has spawned legions of fans since its release in 1957, and lives on today, manufactured by Caterham. Lotus developed and sold Seven cars first, however, and the souped up Super 7 version of the car was powered by a 4-cylinder 1.3-liter Ford Cosworth engine, achieving a top speed of over 160km/h. Simple yet effective designs such as rack and pinon steering and drum brakes made its assembly accessible to the home constructor. • This is a 1/24 scale plastic model assembly kit. Length: 139mm, width: 61mm. • The familiar, cosy form of the car is recreated in detail. • Features a realistic recreation of the Ford Cosworth engine under the opening hood. • Decals have been redesigned for this model, and also included are a new choice of seatbelt stickers. • C Parts are now molded in white for easier painting. • Choose whether to assemble as a road car, or a Clubman racer (with dedicated racing screens and roll bar). • Features a new instruction manual with updated 4-language cover story.

Model car kits 1:24

1/24 Mazda MX-5

€47.99

Article number: 300024342 Product: 1/24 Mazda MX-5 2015 saw the debut of the 4th generation Mazda Roadster (MX-5), the iconic car with a heritage dating back to 1989. This dynamic lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North America) engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. Tamiya has faithfully captured the NEW roadster in 1/24 scale! Details include; option to choose left or right hand drive, soft top in folded position and highly detailed interior.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Brummbaer Late Production

€56.99

Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Wespe Italian Front

€42.99

Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.

Military model vehicles 1:48

1/48 JGSDF Type 16 MCV

€31.99

Article number: 300032596 Product: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.

Model motorcycle kits 1:6

1/6 Link-Type Motorcycle Chain

€44.99

Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.

On-road RC cars (2WD/4WD)

1:10 RC Audi Quattro A2 (TT-02)

€154.99

Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Monte-Carlo 99 (TT-02)

€164.99

Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC MB G-Class G500 (CC-02)

€294.99

Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3 (992) TT-02

€159.99

Article number: 300058712 Product: 1:10 RC Porsche 911 GT3 (992) TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC Racing Fighter (DT-03) The Real

€96.99

Article number: 300058628 Product: 1:10 RC Racing Fighter (DT-03) The Real Say hello to the new model on Tamiya's easy-to-assemble, rough and tumble DT-03 buggy chassis! It features a brand new polycarbonate body design with attractive, boxy lines and a stylish rear wing. Customers outside of Japan will be delighted to hear that the export version of this kit exclusively features a torque-tuned motor and CVA oil dampers. About the Model • This is a 1/10 scale R/C model assembly kit. • Features a stylish new body molded in durable and lightweight polycarbonate. Brand new stickers are included to decorate the model. • The DT-03 uses a tough monocoque frame. Big wheelbase (288mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance off-road! • Front arms are at a 25-degree angle for great off-road driving. Dampers are high-performance CVA oil shocks. • A torque-tuned motor is included in the export version ONLY. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Lightweight kit with detailed and illustrated assembly instructions, motor, controller Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 ST185

€154.99

Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota Land Cruiser LC300 CC-02

Article number: 300058688 Product: 1:10 RC Toyota Land Cruiser LC300 CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 300 as our new R/C model on the cross country CC-02 chassis. Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. In August 2021, Toyota Land Cruiser 300 series was released with full model change for the first time in fourteen years. Added to its inherited styling from the 200 series, an enlarged front grille gives a powerful and prestigious image. Ladder frame chassis and rigid axle rear suspension allow hard off-road performance. This car is powered by a 3.5-liter V6 gasoline twin turbo engine or 3.3-liter V6 diesel twin turbo engine, and features 10-speed automatic transmission. This R/C model assembly kit recreates the top grade ZX model of the Land Cruiser 300 series. Included: 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, Polycarbonat Body, Type 540 Motor, LED Light-Unit, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition

€27.99

Article number: 300014142 Product: 1:12 Honda Dax 125 TAMIYA Edition Tamiya is proud to announce the release of the Honda Dax125 Tamiya Limited Edition as a new addition to our 1/12 Motorcycle Series. (The first generation Dax in 1969 was recreated by Item 16002.) Following on from the popular Monkey (Z-series) bikes, the Honda minibike Dax was announced in 1969. The Dax had a distinctive T-bone frame crafted in pressed steel which housed the fuel tank, and centrifugal clutch engine. It was designed to be ridden by anyone, anywhere, and its charming, distinctive form was loved all around the world. Although its Japanese sales finished in 1981, the Dax returned in 1995 with a similar design to the original. In 2022, Honda announced the Dax125 which inherits the established Dax identity, incorporating elements such as the T-bone frame, a long bench seat, a chrome upswept muffler and more. It can be ridden both on city streets and the open road. Owners can choose between the rich tone of pearl nebula red and understated yet elegant pearl cadet gray for the body. This Dax125 has a limited edition: the Dax 125 Tamiya Limited Edition - the idea of official Honda dealer Cub House in Thailand - which was announced at the 2023 Bangkok International Motor Show. It employs a sumptuous metallic blue body adorned with Tamiya twin star logos plus some checkered flag motifs to get the pulse racing. With dedicated stickers for the muffler heat guard and wheel rims, this version features a horn cover with Dachshund emblem, dedicated serial number for each of these limited edition bikes, and dedicated helmet with Tamiya logo. It certainly fascinated motorcycle fans - whether that be full size or in miniature scale – across the globe. Assembly kit, 1/12th scale, Length: 147mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-RR #55 2006

€56.99

Article number: 300014109 Product: 1/12 Kawasaki Ninja ZX-RR #55 2006 The Ninja ZX-RR was Kawasaki's first MotoGP machine equipped with a 4-stroke engine, and after overcoming initial teething problems, began to show its potential. With the addition of rider Shinya Nakano in 2004, the team kept improving and became capable of challenging the top teams for race honors. Nakano rode the lime-green, 990cc-engined machine to a second place podium finish at Round 8 in the Netherlands for his best finish of the 2006 MotoGP season. Features: Cowlings can be attached/detached using precison-made screws to showcase accurately reproduced internal details. Rear suspension feature realistic nut fastener. Wrench tool is conveniently included to aid assembly. Brilliant livery can be recreated using Tamiya paints (Light Green & Semi Gloss Black), with sponsor logos provided by beautiful Cartograf decals. Synthetic rubber racing slick tires with Bridgestone markings provide an authentic race feel. Markings for both Shinya Nakano's No.56 and Randy de Puniet's No.17 included   Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Figure Ger. Infantry Man

€18.99

Article number: 300036303 Product: 1:16 Figure Ger. Infantry Man This is a 1/16 scale plastic figure assembly kit depicting a WWII German infantryman in late-war camouflage. ★The infantryman is captured in action pose, aiming his MP40 with elongated stock. ★Separate parts are also included for various accessories such as ammo and gas mask cases, grenade, shovel and more.   Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 WWII Figure Ger.Infantry Man Winter

€19.49

Article number: 300036304 Product: 1:16 WWII Figure Ger.Infantry Man Winter This is a 1/16 scale plastic figure assembly kit recreating a WWII German infantryman in reversible winter uniform. ★He is depicted in realistic pose with MP44 assault rifle in hand. ★Realistic facial expression and creases in clothing ensure a highly detailed finish. ★Depictions of ammo box, shovel, gas mask case and other accessories add a final accent to the model.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Zakspeed Capri Turbo MAMPE

€30.99

Tamiya presents an updated new edition of the model 24014 Ford Zakspeed Capri Turbo in 1:24 scale with new Cartograf decals, updated assembly instructions and packaging. The German Racing Championship (DRM) comprised two classes with displacements of 2,000 cm³ and more and under 2,000 cm³. The Ford Zakspeed Capri Turbo was a vehicle that challenged the BMW 320 Turbo. It made its debut at the eighth DRM round in Hockenheim in the summer of 1978 and was characterized by an extremely low front end, a wide body and eye-catching red and yellow markings on a black background. This car regularly raced in the leading group and took its first victory in the spring race at the Nürburgring in October 1978. The following year, it finished second in the first DRM race in Zolder and won the second race in Hockenheim.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Lancia Stratos Turbo

€34.99

Assembly model kit 1/24 scale, Shaped Motor, including one driver Figure

Model car kits 1:24

1:24 Mercedes-Benz 300SL Full-View

Assembly model kit 1/24 scale, Shaped Motor, transparent body   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911GT3 ´99 Streetversion

€35.99

Article number: 300024229 Product: 1/24 Porsche 911GT3 ´99 Streetversion About the Porsche 911 GT3 Since its debut in 1963, the epoch-making Porsche 911 has captivated generations of sports car enthusiasts. Over the years, various models of the 911 have been released, including the 1998 Le Mans-winning 911 GT1. In 1999, the "heart" of that automotive masterpiece, the water-cooled flat-six engine, was inherited by the Porsche 911 GT3. The brainchildren behind that machine are Porsche's development engineers in Weissach, who imbued it with superior agility and handling, without compromising active safety. Capable of accelerating to 100km/h in a mere 4.8 seconds, and with a top speed of 302km/h, the GT3 achieved a new record for production cars when it completed a lap on the northern circuit of Nuerburgring in only 7.56 minutes. The exterior appearance of the GT3 remains true to that of its predecessors, but features a new rear end, discreet side-sills, fixed rear wing, red brake calipers and sporty 18-inch light-alloy wheels. Compared with the 911 Carrera, the four-piston aluminum fixed monobloc brake calipers are larger and sturdier than before, and tightly grip the perforated brake discs. The GT3 cockpit is true reflection of its performance. It features leather-covered bucket seats, which ensure not only ample side support, but also comfort on long journeys and provide about 20kg of weight savings. And since the entire rear-seat section of the car has been dropped, the overall weight of the GT3 was reduced by another 8kg-a true benefit for a sports car of this performance level. Tamiya has recreated this epoch-making sports car in 1/24 scale. The intricate engine is visible when model is viewed from below. The upper surface features a four part rear-wing construction, enhancing the sophistication of the body design. Kit also comes with the Porsche emblem, authentically recreated as a metal transfer. The inside of the detailed cockpit includes a carpet seat for the floor. Glossy metallic parts are used on the wheels, headlight reflectors, door mirrors and muffler.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru Impreza WRC 2001

€34.49

Article number: 300024240 Product: 1/24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai.     Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota GR Supra Custom

€38.99

300024371 1:24 Toyota GR Supra Custom Assembly model kit 1/24 scale, length: 183mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Bundeswehr Leopard 2A6 (3)

€63.99

Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Brick Wall (22)

€5.49

  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger.Engine Maint.Cr.(2)

€16.29

Article number: 300035180 Product: 1:35 Diorama-Set Ger.Engine Maint.Cr.(2) This set will easily allow you to depict a scene of WWII German tank engineers preparing to work on an engine. ★In addition to two engineer figures in overalls, engine parts for a Maybach HL230 engine which powered Tiger I, Panther, and King Tiger tanks are included. ★It also includes accessory parts to depict tools, toolboxes, an oiler, a burner, a drum can etc. to provide your diorama with a greater realistic presence.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Tank Barricade

€5.49

Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★ Creates six each of wooden and metal barricade depictions. Scope of delivery: kit, instructions   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US Infantry-Weapons

€6.49

Article number: 300035121 Product: 1:35 Diorama-Set US Infantry-Weapons This is a 1/35 scale plastic model assembly kit depicting typical WWII U.S. weaponry. ★A comprehensive set includes various pistols, the M1 rifle, M2 carbine, Thompson submachine gun, M2 heavy machine gun, M2 mortar, bazookas, M18 recoilless rifle and various other subjects. ★Also comes with accessories such as ammo cases, rounds, gas marsks and more.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Brit. Infant. Patrol. (5)

€11.99

Article number: 300035223 Product: 1:35 Fig-Set Brit. Infant. Patrol. (5) This is a 1/35 scale set of five British infantrymen which includes a squad leader, an ammunition loader, and riflemen who are cautiously carrying out a patrol. Set includes each squad member depicted in natural poses with realistic expressions. Accessories such as the Sten sub machine gun, Bren light machine gun, Enfield rifles, haverasacks, and back packs all have a fine finish.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Field Commander (5)

€20.49

Article number: 300035298 Product: 1:35 Fig-Set Ger. Field Commander (5) WWII German Commanders This 1/35 scale plastic assembly kit contains five WWII German field commander figures. ★The set includes an high-rank officer pointing out the target holding a map, a commander with a briefcase and a map case, a commander with a MP40 gun, a low-rank officer checking his Luger P08 gun, and a radio operator. ★The MP40 and Luger P08 guns as well as holsters, briefcase, and the radio have a rich finish. About the Uniforms and Equipment The German commanders wore uniforms which had same design as those of soldiers during WWII. However, commanders were allowed to wear tailor-made uniforms made from nicer materials. Likewise, they also wore better quality coats as well as leggings and boots. They usually carried guns such as the Luger P08 and Walther P38, but often used MP40 machine guns to fight against enemies on the frontlines.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Tank Crew Rest(6)

€10.99

Article number: 300035201 Product: 1:35 Fig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.

Military model vehicles 1:35

1:35 Ger. 38to Tank Destr. Hetzer (1)

€56.99

Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Floating Car Typ 166 (1)

€18.99

Article number: 300035224 Product: 1:35 Ger. Floating Car Typ 166 (1) This is a plastic assembly model kit of the 4WD Schwimmwagen which earned the trust of German soldiers with excellent performance on bad roads and fording ability. The body with hull-shaped underside has been reproduced via slide molding for a realistic finish and ease of assembly. The windshield is moveable and the screw can be positioned in the down position to allow you to depict a fording scene. Parts to depict the air-cooled four-cylinder engine also included. Interior details such as the flooring & seats, instrument panel, shift lever etc have a rich finish. The folded canvas roof cover also provides the model with great realism. A driver figure is included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Marder I Tank Destroyer

€37.99

Article number: 300035370 Product: 1:35 Ger. Marder I Tank Destroyer This is the latest subject in the long-running Tamiya 1/35 Military Miniature Series. The Marder I was one of the early German efforts to update a military that – despite crushing early successes against Poland and the Allied early in WWII – was in sore need of mechanization. Based upon the French Lorraine supply tractor, it was one of a number of commandeered vehicles pressed into German service. Around 170 were produced from May 1942, and their 7.5cm Pak40 anti-tank gun was a threat to Allied AFVs in France post-Normandy landings, and also on the Eastern Front and even North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • Tamiya designers worked up close with a specimen in the Musée de Blindés, Saumur. The result is a highly accurate depiction of the compact chassis and bulging upper hull, complete with rivet and weld line details. • Interior features gun breech detail, sights, racks, radio equipment and more. • Assembly type tracks have single piece straight sections. • Bogies have an ergonomic parts breakdown. • Two figures are pictured looking to the skies, hinting at the breakdown of air control from their Luftwaffe after the Normandy landings. • Comes with three marking options, two from Normandy and one from the Eastern Front.

Military model vehicles 1:35

1:35 Ger. PaK 38 5cm w/ Crew (4)

€23.49

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger.Tank Destroyer Jagdtiger Ea(2)

€82.99

Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 KS600 Sidecar combination (3)

€19.99

1/35th scale, including Motorcycle, Sidecar and 3 Figures   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 US 10-in-1 Cartons WWII

€4.29

Article number: 300012689 Product: 1:35 US 10-in-1 Cartons WWII These detailed depictions of WWII 10-in1 ration cartons were initially a part of Item 25196, but are now to get their own release in the Detail-Up Parts Series. The 10-in1 Ration was supplied to U.S. troops from 1943 to 1945. One sleeved carton contained four individual boxes, each a day’s rations for ten soldiers and including canned food, biscuits, cereal and more. Item Contents/Information • Sheet dimensions: 200mm x 195mm. • Contains cut-out illustrations for sleeve, carton and inner box components. • One sheet can be used to make eight sets, and you can choose to depict the carton sealed up or even removed from the sleeve and open to reveal the inner boxes. • The sheet also features a basic explanation of the 10-in-1 ration in English and Japanese. • An excellent choice to add further detail to WWII-era U.S. subjects such as those below. Kit model, scale 1:35, Cardboard sheet with 8 catering cardboard, sheet size 200x195mm, Suitable for models from the period of the 2nd World War.

Military model vehicles 1:35

1:35 US M151A2 Ford MUTT Truck (1)

€13.99

Article number: 300035123 Product: 1/35 US M151A2 Ford MUTT Truck (1) The U.S. Armoured vehicle test course is located in Aberdeen, Maryland, and is one of the most rigorous and demanding coursed in the world. Early in April 1957, a familiar looking small vehicle was seen to be running over the course with comparitive ease, and upon closer inspection it turned out to be the replacement for the well known Willy's "Jeep", the new Ford M151. Outwardly this new vehicle loos very much like its older brother. Both are small, compact, rugged, simple to operate and maintain; however, the 151 incorporates all of the latest advanced features learned during combat operations in conflicts since world war II. Features such as the newly developed OHV engine, light semimonocoque body and 4 wheel independent suspension systems allowed it to outpoint all other submitted replacement vehicles for the ageing WWII Jeep. Development for this replacement vehicle was started by the Ford Motor Company were licensed to produce the vehicle and they delivered approximately 10,000 units a year to the U.S. Army, Navy Air Force and Marines. Shortly after its adoption it was selected by most of the nations of the free world as a replacement for their own light utility vehicles. Some of the advanced features incorporated into the M151 caused problems and defects were detected in the initial shipments, among the most serious was the strength and stability of the rear suspension system which was corrected and improved in 1964 and 1970. The M151A2 now in service has added safety features like stiffer rear suspension, large blinder lamps and a two step windshield wiper, safety glass and an impact absorbing steering wheel. With its extreme versatitliy the basic M151 can be altered into a combat ambulance; radio communications vehicle; 105mm recoilless rifle transport and a launcher for the new tow missile system adopted in the late 70's. Combat experience in VietNam has shown that the Ford M151 Military Utility Tactical Truck (MUTT) is indeed a very versatile go anywhere combat weapon and is likely to remain in service for years to come with military forces worldwide. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig-Set Ger.Infant. Winter (5)

€14.99

Article number: 300035256 Product: 1:35 WWII Fig-Set Ger.Infant. Winter (5) In a crouched position, these soldiers are very cautious of their surroundings while pushing forward following a tank. Such a tense frontline scene can now be displayed with this plastic assembly model set which includes five German soldier figures wearing winter uniforms, cotton-made smocks, and realistically reproduced winter overcoats seen during the middle stages of WWII. The noncommissioned officers are depicted carrying weapons such as an MP40 submachine gun and rifles and standing in lower poses than their field commander who has a Walther P38 and a grenade in each hand. Set includes five figures.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Milit.Insignia Decal Vol.2

€11.79

Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35

Military model vehicles 1:35

1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121

€14.49

Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the current standard, these Pzkpfw II look quite inferior both in fire and defensive powers. But when compared with those of other countries active at the time, the Pzkpfw II should be ranked as by far the most superior one. Indeed, its nimble mobility matching well with the German application was the driving force of the spectacular victory won by the Germans at the initial period of the World War II.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Bf109 G-6 Messerschmitt

€49.99

Article number: 300061117 Product: 1:48 Ger. Bf109 G-6 Messerschmitt This precision model aircraft assembly kit depicts the Messerschmitt Bf 109 G-6 variant. It compliments Tamiya’s other variants such as the E-3 and E-4/7 Trop. The Bf 109 is a legendary name in aviation, an aircraft which combined longevity and versatility in the hands of the Luftwaffe and other air forces. The G-6 was the most prolifically produced Bf 109, accounting for more than a third of the total. Introduced in early 1943, it could be fitted with underwing 20mm cannons in pods, or synchronized 13mm machine guns in distinctive bulges ahead of the cockpit, and was powered by the Daimler-Benz DB605A liquid-cooled V12, which gave a top airspeed of 640km/h.

Model aircraft kits 1:48

1:48 Ger. Messerschmitt BF109E-4/7 Trop

€28.99

Article number: 300061063 Artikelbezeichnung: 1:48 Ger. Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 US Vought F4U-1A Corsair

€28.99

Article number: 300061070 Product: 1:48 US Vought F4U-1A Corsair About the Vought F4U-1A Corsair After enduring heavy losses to the Japanese Navy's Zero fighters in the early stages of the Pacific War, the U.S. Navy became focused on developing new fighters capable of turning the tides of aerial combat. Among those fighters was the Corsair, first developed to be a high speed, carrier borne aircraft. Built around the new Pratt & Whitney R-2800 2000hp engine, and turning the largest propeller ever attached to a fighter plane (4m dia.), this gull-winged wonder was destined to be a success. In June 1942, the F4U-1 production models made their maiden flight. However, due to their restricted forward field of view, and because of a propeller wash effect caused them to stall left wing first during low speed landings, they first were used as land based fighters. Succeeding the F4U-1 in the summer of 1943 was the F4U-1A, which was equipped with an extended rear wheel landing gear shaft, a slightly modified glazed canopy, and a small triangular strip of metal bolted to the right leading edge of the wing to equalize the stall and avoid the roll to the left at touch-down. Despite these improvements, the new F6F Hell Cat was adopted as the main carrier-borne aircraft, and the first combat Corsairs became relegated to land based US Marine squadrons in the South Pacific. Major Boyington and 2nd Lieutenant Hanson of the U.S. Marines, Lt. Kepford of the Navy and other ace-pilots, bravely flew the F4U-1A into fierce air-combats, overpowering the Japanese Zero fighters with tremendous top speed and six 12.7mm heavy machine guns.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6/1:12/1:24 Cable 0.65mm OD Bla 2m

€4.49

Article number: 300012676 Product: 1:6/1:12/1:24 Cable 0.65mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,65mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.

Model aircraft kits 1:48

Avro Lancaster N Mk.I-III

€109.99

  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

Focke-Wulf Fw190 A-3

€15.99

Article number: 300060766 Product: Focke Wulf Fw 190 A-3 Development of the FW190 series began in the Autumn of 1937, under a contract issued by the Reichsluftfahrtministerium (Air Ministry) for a single seat fighter to supplement the Messerschmitt Bf109. Two proposals were submitted by Kurt Tank, the technical director of the Focke-Wulf Flugzeugbau (aircraft factory). The proposal using the then new BMW 801 aircooled radial engine was chosen. This tough and powerful engine was placed in a robust airframe and provided superb handling, well balanced control, and brisk acceleration. It entered service in 1941, flying alongside the Bf 109 and it soon took control of air superiority over the English Channel. Establishing itself as a mainstay fighter of the Luftwaffe, it outperformed the contemporary Spitfire Mk.V's in almost every respect and maintained this advantage until the arrival of the Spitfire IX in July 1942. The Fw190 fighter underwent constant improvement throughout its life. The A-3 version used the improved BMW 801Dg engine that produced 1,700hp. Armament was increased from four to six guns, consisting of two rapid firing MG151's in the wing roots; two MG FF's outboard of the landing gear and two fuselage mounted MG 17 machine guns. Throughout WW2, many Luftwaffe squadrons allowed personal pilot markings and distinctive squadron insignia to be used, plus lower cowl, wing tip and rudder color additions to the original paint schemes. Detailed Plastic Kit of model Focke Wulf Fw 190 A-3 in scale 1:72   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

Honda CB750F

€24.99

Article number: 300014006 Product 1:12 Honda CB 750F The Honda CB750F Motorcycle appeared on the Japanese market in June 1979 and was shortly to become the best seller in the 750 class. Just ten years prior to their 750F release, Honda opened up the field of multicylinder bikes with their now famous four cylinder CB750. Honda had won several Grand Prix motorcycle races with multi-cylinder bikes, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power, and so shocked the industry that shortly many of the famous makers produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their "Z" series DOHC 4 cylinder 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB750K DOHC with four valves per cylinder, a powerful 68hp, and new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F which had been copied from their racing RCB bike. This styling was new to stock motorcycles in the world. With the low positioned handle bars and rear positioned foot rests, allowed a "slouched" riding position. The style is setting the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, semi-air front suspension system, and FQV damped rear coils. Braking utilizes the dual piston caliper system, with dual discs in front and a single disc at the rear. A newly designed racing type front fender with spoiler has proved to be very popular among the bike enthusiasts. The overall styling of that unveiled in 1979, with the smooth flowing lines from tank to tail light have been retained, and it is likely that this fine motorcycle will stay at the forefront of sales for years to come. Honda CB750F

Model car kits 1:24

MB 500 SEC

€33.49

300024029 1:24 Mercedes-Benz 500 SEC Assembly model kit 1/24 scale, length: 209mm, Shaped Interior, suspension, Chassis, manual included   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nismo GT-R LM Calsonic

€28.49

  Warning! Not suitable for children under 14 years.

Model car kits 1:24

Nissan Silvia K's

€18.99

Model car kits 1:24

Nissan Skyline GT-R V-Spec R33

€25.49

Model car kits 1:24

Peugeot 206 WRC

€29.99

Model car kits 1:24

Subaru Impreza WRC 98

€26.99

Model motorcycle kits 1:12

1/12 Honda Monkey 125

€36.49

Article number: 300014134 Product: 1/12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit.   Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with   superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured   to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate   various lines, and of course decals to recreate markings.

Model motorcycle kits 1:12

1/12 Yamaha YZF-R1M

€49.99

Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.　

Model car kits 1:24

1/24 Mazda MX-5 RF

€41.99

Article number: 300024353 Product: 1/24 Mazda MX-5 RF Tamiya is delighted to announce a new stablemate for the popular MX-5 (also known as the Miata MX-5 in the US and Roadster in Japan) model Item 24342! This kit recreates the RF model that was originally announced by Mazda in 2016: the initials stand for Retractable Fastback, as the car features a sleek fastback hard-top design with innovative retractable roof. In fact, the actual car's three-piece roof opens and closes in just thirteen seconds, and all at the push of a single button. It also features tweaks to its chassis and suspension to accommodate the heavier top section, while retaining all of Mazda’s vaunted safety features. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 164mm, width: 80mm. • The kit depicts the 2017 model MX-5 RF, complete with options available on top grade models in the Japan market such as Recaro seats, and BBS wheels. • Modelers can choose to assemble the kit as Japanese, US, UK or European market spec, and have the option of depicting the hard top up or down, thanks to new roof and rear/side window parts. • Metal-plated parts are used to depict light reflectors and other components. • Decals are included for instrumentation and other details, as are metal transfers for emblems and side mirror surfaces.

Model car kits 1:24

1/24 Mercedes-AMG GT3

€64.99

Article number: 300024345 Product: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 TOYOTA GR Supra

€44.99

Article number: 300024351 Product: 1:24 TOYOTA GR Supra The latest addition to the long-running 1/24 Sports Car Series is a stunner – Toyota’s brand new GR Supra, which joins its R/C cousin (Item 58674) in the Tamiya catalog. Upon its global announcement in January 2019, the TOYOTA GR Supra created a worldwide buzz. Designed with beautiful balance, it provides superlative handling and stable corners, while the sensuous long nose, short deck form has a striking double-bubble roof. Combined with impeccable power from a turbocharged inline-six or inline-four engine, the GR Supra is set to define the next generation of performance. • This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. • The dynamic lines of the body are rendered with stunning accuracy. Bumper, A pillar, front grille and other parts are molded separately for a sharp finish. • Features console and dashboard, and seats with separate headrest components. • Can be assembled as Japan, U.S. or Europe spec, with dedicated left- and right-hand drive part positions. • A detailed underside shows off the exhaust system, plus multi-part front and rear suspension. • Features the 19-inch wheels exclusive to the top grade RZ car in Japan. They are two-part designs with separate metal-plated and black components. Tires have realistic tread. • Includes metal transfers, plus masking stickers for window areas.

Military figures & Accessories 1:35

1/35 Panther D Metal Barrel

€15.79

Military model vehicles 1:35

1/35 Schwimmwagen T166 WW

€23.49

The German Schwimmwagen Type 166 (item number 35224, scale 1:35, with narrow tires) has been a bestseller since 1998. TAMIYA now presents a Schwimmwagen kit with wide tires, additional equipment such as the MG34 machine gun and two new figures. The European geography, criss-crossed by rivers and characterized by wetlands, presented the Wehrmacht with major military challenges and prompted them to develop the Schwimmwagen, an amphibious vehicle based on the Kübelwagen designed by Ferdinand Porsche. With a 4-cylinder 25 hp petrol engine, the Schwimmwagen reached a top speed of 80 km/h on land. The three-bladed rear propeller was lowered manually via a rod and enabled speeds of up to 10 km/h in the water. Due to a shortage of materials, many Schwimmwagens were equipped with 133 mm tires, while the wider 200 mm tires offered significantly better off-road mobility.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Sherman Easy8 EuroTheater

€52.99

Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 US M10 Mid Production

€52.99

Article number: 300035350 Product: 1/35 US M10 Mid Production This is a model of the famed M10 Tank Destroyer, a subject also covered in the 1/48 scale Military Miniature series. This largely newly-tooled model (only machine gun and clear parts are taken over from existing models) gives it the glorious detail of the larger 1/35 scale. The astonishing success of German armor tactics in 1940 prompted U.S. forces to adopt a doctrine requiring dedicated new tank destroyers to counter them. After going down a few different design routes at the start of the process, they eventually hit upon the highly successful M10 design with well-sloped (if rather thin, to keep the vehicle light and maneuverable) armor plate, and the highly capable 3-inch (76.2mm) gun. Over 4,900 were produced, and took part in Operation Torch (the invasion of N. Africa), as well as fighting in Italy and the advance upon Germany that would bring the exhausting conflict to a close. About the model 1/35 scale plastic model assembly kit. Length: 196mm, width: 88mm. Intensive study and measurement of the M10 in the tank museum at Saumur led to this highly detailed depiction of its form complete with sloped armor, right down to auxiliary armor bosses. The open top on the distinctive turret allows viewing of the 3-inch gun breech and realistic interior. Compare and contrast depictions of surface textures such as the cast mantlet and differential cover versus the welded armor plate of the turret sides and upper hull. Belt-type parts recreate T51 tracks. Driver's hatch can be attached in open or closed position, and features periscope depiction. Comes with 3 figures (commander, loader, gunner) in realistic pose, plus 2 marking options for recreating M10s belonging to the 601st and 634th U.S. Tank Destroyer Battalions   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 British 7ton AC Mk.IV

€21.99

Article number: 300032587  Product: 1/48 British 7ton AC Mk.IV   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1/72 Bf-109 G-6 Messerschmitt

€26.99

Article number: 300060790 Product: 1/72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (with distinctive eye marking on the Beule) and JG54. Detailed Plastic Kit

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Club Pai. MB-01

€174.99

Article number: 300047501 Product: 1:10 RC Alfa Rom. Giulia Club lack.MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.

On-road RC cars (2WD/4WD)

1:10 RC Alfa Rom. Giulia Spr. Club MB-01

€164.99

Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack. About the MB-01 chassis　 The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC AQROSHOT (DT-03T)

€134.99

Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi 90 quattro Racing Lac.TT-02

€179.99

This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Body prepainted in White (PS-1) with Smoke (PS-31) windows Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger,) 4WD kit model, TT-02 chassis, electronic speed controller, 540 torque-tuned motor, pre-painted polycarbonate.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi R8 LMS 2008 TT-02

€169.99

Tamiya welcomes another racing car – this time, the Audi R8 LMS 2008 – paired with our popular TT- 02 chassis. Based upon the Audi sportscar R8 and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-liter V10 midship engine capable of over 500hp was mounted in a lightweight aluminum space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Mustang GT4 (TT-02)

€154.99

Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.

On-road RC cars (2WD/4WD)

1:10 RC Honda NSX 1998 Racing TT-02

€159.99

Article number: 300058739 Product: 1:10 RC Honda NSX 1998 Racing TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK-GT-R 1997 TC-01

€274.99

Article number: 300058731 Product: 1:10 RC MB CLK-GT-R 1997 TC-01 Tamiya is delighted to announce that the 1997 Mercedes-Benz CLK-GTR is now paired with the TC-01 chassis. (Item 47437 uses the TT-01 Type-E chassis.) The Mercedes-Benz CLK-GTR car took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, it was actually vastly different. It used a carbon composite monocoque frame with roll cage, a rear 6-liter V12 engine capable of over 600hp, and 6-speed sequential transmission. Its 4-wheel double wishbone suspension featured front and rear pull-rod setups. In the same year, this car took both Manufacturer’s and Driver’s Championships. 4WD assembly kit, TC-01 Chassis, Mercedes Benz CLK-GTR Boddy, 540 Motor, assembly guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E

€159.99

Article number: 300058638 Product: 1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC McLaren Senna TT-02

€159.99

Article number: 300058711 Product: 1:10 RC McLaren Senna TT-02 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the McLaren Senna which has already been released as Item 24355 in the 1/24 Sports Car series!   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mini Cooper Racing MB-01

€164.99

This is another R/C kit with the MB-01 chassis - this time, short wheelbase and front motor / front wheel drive (FF). The Mini was a small, two-door, four-seat car produced by the British Motor Corporation (BMC) from 1959 until 2000. Original Minis were built for four decades without model changes. This car was front-wheel drive layout which was rare at that time, and it featured compact mechanics and maximum interior space. With its design featuring necessary bare minimum, this car established its status. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Neo Scorcher (TT-02B)

€149.99

Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)

€234.99

Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Nissan GT-R Drift (TT-02D)

€234.99

Article number: 300058623 Product: 1:10 RC Nissan GT-R Drift (TT-02D) Tamiya is delighted to announce a new release on the drift spec TT-02D chassis. This model depicts the Nissan GT-R, using the body originally included in Item 58411. The GT-R was unleashed on the world by Nissan in December 2007. Laden with a powerful 3.8-liter V6 twin-turbo engine, dual clutch transmission, independent transaxle 4WD and more, it was designed to be a supercar ready to be driven any time, anywhere and by anyone, and featured regular annual performance-boosting design tweaks. About the Model • This is a 1/10 scale R/C model assembly kit. • The sleek, powerful form of the GT-R is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • LED units are included for export version only! • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58411.

On-road RC cars (2WD/4WD)

1:10 RC Opel Calibra V6 Cliff (TT-01E)

€149.99

Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) Tamiya welcomes the Opel Calibra V6 Cliff R/C model based upon the TT-01 Type-E chassis. The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. The distinctive, overall black body with the Cliff logo caught people’s eye, and this car showed off strength in the races. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€184.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Rally MB-01

€154.99

Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Plasma Edge II TT-02B 4WD

€149.99

Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 Carrera RSR (TT-02)

€164.99

Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3 R (992)

€169.99

Tamiya is proud to announce the release of the Porsche 911 GT3 R (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. Based upon the Porsche 911 GT3 (released as our 1/10 R/C kits – Items 58712 and 47496), in July 2022, the Porsche 911 GT3 R (992) was announced as a car which was developed to conform to GT3 regulations. With a horizontally opposed 6-cylinder engine capable of 565ps, this car features lightweight body (only about 1,250kg) with carbon fiber, and flourished at global races such as NLS (Nürburgring Langstrecken Serie) 2024 and 2024 Fanatec GT World Challenge Asia Powered by AWS. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche Carrera RSR 2.8 La.BT-01

€199.99

The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. The Body is Pre-Painted in PS-1 White and PS-31 Smoke (Windows). 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polyacarbonate body prepainted, Manual.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC The Grasshopper i 2005 2WD Re.Re

€119.99

Article number: 300058346 Product: 1/10 RC The Grasshopper i 2005 2WD Re.Re Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 380 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC The Grasshopper II (2017)

€119.99

Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC The Hornet 2004 2WD Buggy LWA

€134.99

Article number: 300058336 Product: 1:10 RC The Hornet 2004 2WD Buggy LWA About the model: - Length: 400mm, width: 230mm, height: 150mm. Weight: 874g - Solid bathtub frame with side bumpers - High performance Type 540 motor - Independent swing axle front suspension with friction dampers -Rolling rigid axle rear suspension with oil filled dampers - Sealed rear gearbox to protect diff gear during off-road running -Original 3-piece assembly wheels compatible with optional ball bearings (sold separately) - Straight ribbed racing front tires - Spiked buggy rear tires - Durable, shock absorbent polycarbonate body shell - Reinforced resin bumper - TEU-101BK Electronic Speed Controller

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Ce.GT-Four ST205 blk.TT-02

€174.99

Tamiya welcomes this limited edition version of Item 58743 1/10 R/C Toyota Celica GT-FOUR (ST205) (TT-02) with the polycarbonate body pre-painted in Black (PS-5) with Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat Body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC XV-01 Lancia Delta HF Integrale

€284.99

Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 888 Superbike ´93

€34.99

Article number: 300014063 Product: 1:12 Ducati 888 Superbike ´93 About the Ducati 888 Superbike Racer On the 26th of September 1993, a young and inspiring motorcycle racer named Tetsuya Harada was adding the final touches to his machine at the Jarama racing circuit, just prior tot he last round of the season. This would make him the first Japanese World Champion since 1977. His closest rival, Loris Capirossi, was ahead in point standings going into this last race, but bad luck plagued him during the dynamic battle for the 250cc GP2 title. Although this was Harada's debut season for the World Grand Prix, he had been working closely with Yamaha for the last couple of seasons, perfecting the works TZM bike, which allowed him to win the 1992 All Japan Championship title. The 1993 Yamaha TZ250M used a 249cc liquid cooled V-twin cylinder engine capable of 94 horsepower. Its crankcase reed valve induction system was combined with an electronically controlled exhaust valve system. The highly sophisticated six-speed gear box used an electronic cut-out gear changing system that eliminated clutch operation and minimized racing stresses. This awesome powerplant was mounted on Yamaha's exceptionally rigid twin-spar box-section aluminum frame that was capable of head angle adjustments. The rear suspension was also of box-sectioned aluminum to withstand the enormous power and traction. The bike rides on Marchesini cast magnesium wheels matched to Dunlop radial tires. The superb stopping power was achieved by front Brembo and rear Nissin Brake systems.  

Model motorcycle kits 1:12

1:12 Ducati 916 Desmo. 1993

€35.99

Article number: 300014068 Product: 1:12 Ducati 916 Desmo. 1993 About the Ducati 916 Ducati, the renowned Italian motorcycle manufacturer, is highly regarded by motorcycle enthusiasts the world over. Their current top-of-the-line "916" bike was unveiled to the public during the 1993 Milan Motor Show. In recent years, Ducati has been a dominant force at the World Superbike Championships. Their 916 was developed using the latest racing technology and expertise, and became a very effective base machine fore these Championships. Its 114 horsepower, 916cc, liquid cooled L-twin cylinder engine uses a computer controlled fuel injection system and Ducat's traditional Desmodromic valve operation system. This valve system uses cam mechanics for both opening and closing the valves, while a conventional system closes the valves with springs only. This powerful engine is mounted in a light weight and extremely rigid, chrome molybdenum steel tubular frame. The rear swing arm suspension uses a mono-arm for quick tire changing during competition. Showa's shock absorbers and Brembo brake calipers are used at both ends. The 916 has a 2-stage adjustable caster offset system. Its aerodynamic cowl design is very distinctive, differing from other racer-replica bikes. The front cowl has engine air intake openings and mounts the dual headlamps. The fuel tank is ergonomically sculptured to fit the rider's varying posture during hard riding. The 916 is a true street legal racing machine on the leading edge of performance and styling.     Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati Superleggera V4 w/Racing Kit

€55.99

Here is great news for fans of the legendary Italian motorcycle manufacturer Ducati! Following up on the popular 1/12 Ducati Superleggera V4 (Tamiya Item 14140), we are very proud to release the 1/12 Ducati Superleggera V4 with Racing Kit. The Ducati Superleggera V4 can be further upgraded with the accompanying boxed racing kit provided by Ducati itself. The kit includes a plethora of parts for circuit use, such as the super-stylish and high performance Akrapovic titanium racing exhaust, and an open carbon fiber clutch cover. The license plate holder and side mirrors can be removed when the Superleggera V4 prowls the circuit. It also features a racing filler cap, brake lever guard, and a carbon fiber swingarm cover with titanium slider. The circuit-custom engine output reaches an eye-popping 234hp; as the weight dwindles to a mere 152.2kg, the bike records an astonishing power to weight ratio of 0.65kg/ps, turning the already impressive Superleggera V4 into a honed track machine. - This is a 1/12 scale model assembly kit. - Length: 176mm (including the racing stand: 198mm), height: 98mm. (Length and height are the same as Item 14140.)   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Fig. Street Rider

€18.29

Article number: 300014137 Product: 1:12 Fig. Street Rider The 1/12 Motorcycle Series welcomes a brand new, original figure in the form of the Street Rider, a male figure in casual bike gear which is perfectly suited to display with our models in the series, particularly street bikes. It features a number of options with regard to helmet, pose and eyewear. Take this chance to make a little diorama from your latest motorcycle masterpiece! About the Model • This is a 1/12 scale plastic model assembly kit. • The latest 3D scanning techniques ensure that this is a finely molded figure with excellent detail including natural rendering of folds and creases on the clothing. • Included are parts to make either of two different options: i) the rider helmeted and pulling on his gloves, ready to mount the bike; or ii) the rider having just got off the bike, helmet in hand and with a wooly hat on his head. • Features parts to create either half or three-quarter helmet. • Optional sunglasses and helmet visor are also included. • Comes with a screw-affixed base for stable display.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Front Fork Yamaha YZF-R1M

€29.99

Article number: 300012684 Product: 1:12 Front Fork Yamaha YZF-R1M Add an even deeper layer of realism to your 1/12 scale model of the YZF-R1M using this detail-up parts set depicting the bike's font fork! Metal and plastic parts are included to replace kit standard parts and provide an ultra-realistic finish to the model. • The set provides numerous individual parts including inner and outer tubes, plus parts depicting smaller pieces of the fork such as connectors and end caps. • Dedicated metal parts include reservoir tank, outer tubes, gold color fork tops and more. • Damper spring is given a realistic yellow painted finish (kit part is black). Front Fork Kit model, scale 1:12, Aluminum immersion tube and com- pensating holder anodized, mounting material, Instructions, Suitable for 300014133.

Model motorcycle kits 1:12

1:12 Gabel-Set Suzuki GSX-RR 2020

€36.49

Model motorcycle kits 1:12

1:12 Honda CB 750F Custom Tuned

€27.49

  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda RC166 GP Racer 1960

€89.99

Article number: 300014113 Product: 1/12 Honda RC166 GP Racer 1960 The Honda RC166 is known for its excellent top speeds and features a 6-cylinder engine with six exhaust pipes. The bike was made famous by motor sports legend Mike "The Bike" Hailwood, who raced the RC166 to 10 victories and a world championship title. His infamous bike is reproduced as a model and features red and silver FRP cowling, large diameter drum brakes and silver spoke wheels. .   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1100 Katana Cust.Tuned

€28.49

Article number: 300014065 Product: 1:12 Suzuki GSX1100 Katana Cust.Tuned Making its sensational debut at the 1980 Cologne Motor Show, the Suzuki GSX1100S Katana came with special parts and a customized finish which has been accurately portrayed by this plastic assembly model kit. ★The air-cooled 4-cylinder DOHC engine and its cooling fins have a precisely reproduced finish. ★Engine parts including the front mounted oil cooler and the Katana's exhaust are included in the set and provide the model with greater realism. ★Custom parts including the front and rear brakes, large diameter front rotor with 4-pod calipers, and small diameter rear floating calipers are realistically reproduced to help capture the ever lasting presence of the Katana.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Team Suzuki ECSTAR GSX-RR 2020

€55.99

Kit model, scale 1:12, racing version, engine, frame, fairing ung, racing motorcycle stand, slick tires, exhaust system, instructions, Decal, length 178mm.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 Road Star 1999

€43.49

Article number: 300014080 Product: 1:12 Yamaha XV1600 Road Star 1999 About the Yamaha XV1600 Road Star Yamaha shocked the motorcycle world once again when it brought out the XV1600 Road Star, a unique combination of traditional cruiser design with state of the art technology. The construction of the machine is focused on providing the maximum amount of comfort, performance and style to today's large capacity cruiser customer. The XV1600 is powered by a huge 1,600cc air-cooled V-twin pushrod engine housed in an ultra-long and low chassis. This OHV engine pumps out 46.3kW (62.6PS) at 4,000rpm and features an electric starter. The front suspension of this machine consists of telescopic forks, while the rear consists of a swinging arm monocross. This gorgeous motorcycle was voted "1999 Cruiser Bike of the Year" by Cruising Rider Magazine. About the model - Tamiya has recreated the Road Star in stunning detail as their latest addition to the 1/12 Motorcycle Series. - Overall length: 208mm, overall width 89mm, overall height: 100mm. - Enjoy the fascinating assembly incorporating real screws and two kinds of metal plated parts. The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece. - Kit comes with two kinds of tank emblems (one for the Japanese and American "Road Star" and one for the "Wild Star" as it is called in Europe. - Various decals for stripes and meters are also included in this authentic kit. - Transparent display stand also included.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZF-R1 1000ccm 1997 Street

€33.99

Article number: 300014073 Product: 1:12 Yamaha YZF-R1 1000ccm 1997 Street At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZR-M1 #7/#33 ´04

€40.99

Yamaha YZR-M1 '04 No.7/No.33

RC trucks

1:14 RC Grand Hauler Customized

€479.99

Article number: 300056344 Product: 1/14 R/C Grand Hauler Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm. • The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing. • Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Newly-designed 1/14 scale driver figure included. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC MB Arocs 4151 Tipper 8x4

€769.99

RC trucks

1:14 RC Scania 770 S 4x2

€489.99

Following Item 56368 (1/14 R/C Scania 770S 6x4) and Item 56371 (1/14 R/C Scania 770S 8x4/4), Tamiya welcomes the Scania 770 S 4x2 to 1/14 Tractor Truck Series. The Scania 770 S 4x2 is a single front steering, single rear-axle drive four-wheel heavy trailer head equipped with a 16.4-liter V8 turbo engine capable of 770hp, added in 2020 to the Swedish manufacturer Scania’s top-grade S Series. The 4x2 trailer heads are versatile, and are a very popular type of trucks in our line-up. This kit also has accessory parts to recreate a customized version like those which are trendy in Europe. Assembly Kit of Scania 770S, 1/14th scale, Aerodynamic Package, Driver Figure, Aluminium Frame, Manual included.   Warning! Not suitable for children under 14 years.

RC trucks

1:14 RC Volvo FH16 XL 750 4x2

€484.99

Article number: 300056375 Product: 1:14 RC Volvo FH16 XL 750 4x2 Tamiya welcomes the Volvo FH16 Globetrotter XL 750 4x2 Tractor in our popular 1/14 Tractor Truck series! The FH16 series is the flagship of Swedish manufacturer Volvo Trucks and it was the result of a model change in 2012. The top-class Globetrotter XL offers comfortable interior space and superior aerodynamics, and allows long-distance travel coupled with a high-output 750hp engine. Volvo FH16 XL 750 4x2 Model kit ABS Injection body with aero-pack Aluminum Ladderframe, 1 drive axle, 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotr Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Fig. Bundeswehr Tankcr. Leopard (2)

€22.99

Article number: 300036309 Product: 1:16 Fig. BW Tankcrew Leopard (2) This is a 1/16 scale plastic figure assembly kit depicting tank crew of the Bundeswehr. ★Includes parts for one full-body figure in standing pose, and a torso figure for use in 1/16 scale Leopard 2A6 models. ★Separate parts recreate microphone and headset. ★Clear parts are used to depict goggles. ★Includes decals for various insignia, and a display base.   Warning! Not suitable for children under 14 years.

RC tanks

1:16 RC Leopard 2 A7V w/Option Kit

€1,149.99

The Leopard 2A7V is one of the most modern battle tanks in the world and is used in numerous countries. The V stands for "improved" or, more accurately in German "verbessert". The improvements compared to the previous version are considerable: Better visibility through the use of modern optics and camera systems. More firepower through the revision of the 120mm cannon. The communication system has been improved and the Battle Management System (BMS) is used. The chassis has also been reinforced with an additional protection module and additional armor on the front protects the tank better against armor-piercing ammunition. The original weighs an impressive 63.9 tons and is powered by a 1500 hp engine. TAMIYA has now made this tank into a remote-controlled version in 1/16 scale. Here, too, the electronics have been completely redeveloped and the model redesigned compared to its predecessor, the 56020 2A6. The result is a real highlight: Both in terms of detail and the functions, it sets standards in this area. All functions can be controlled via the DMD T-12, such as driving functions, turret rotation, light functions, sounds and also the combination of sound, movement and light when firing a cannon, for example. Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering.   Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Porsche 935 Vaillant-Kremer

€47.99

Assembly kit, 1/20th scale, length: 235mm, new rubber tires, cartograf Decal sheet

Model car kits 1:20

1:20 Toyota Celica LB Turbo Gr.5

€46.99

Assembly model kit 1/20 scale, Shaped Motor, including one driver Figure   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Mustang GT4

€48.99

Article number: 300024354 Product: 1:24 Ford Mustang GT4 Tamiya is delighted to announce the appearance of the muscular Ford Mustang GT4 in the long-running 1/24 Sports Car Series! The actual car is a race-ready powerhouse featuring honed aerodynamic form with front spoiler, rear wing and diffuser, high performance brakes, lightweight carbon fiber vented engine hood, roof, door panels and more, plus a big 5.2-liter V8 engine in the front. This model recreates the 2019 spec car. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 203mm, width: 81mm, height: 60mm. • The powerful form of the 2019 spec Mustang GT4 is captured in style, thanks to the extensive time spent with a real car by our designers. • Engine hood air intake designs are captured in style, contributing to the overall muscular look of the car. • The underside features depictions of the complex suspension and visible engine sections. • A realistic interior has renderings of the dedicated steering wheel, console panel, roll cage and racing seat. • Separate parts for lights help streamline the painting process. • Comes with decals to recreate either a gun metal color no.17 car, or a white no.18 car. Masking stickers are also included. • Includes metal-plated depictions of side and rear view mirror surfaces.

Model car kits 1:24

1:24 Honda S600 Convertible/Hardtop

€45.99

Article number: 300024340 Product: 1/24 Honda S600 Cabrio/Hardtop The Honda S600 is an automobile manufactured by Honda. It was launched in March 1964. It was available as a roadster and as a fastback coupé – introduced in March 1965. The S600 was the first Honda available in two trim levels. During its production run up to 1966, the model styling would remain pretty much the same, with the most notable changes coming to the front grille, bumper, and headlights. The S600 got 57hp out of a 606cc 4-cylinder DOHC engine that could hold its own compared with racing engines, and it featured a motorcycle style chain-driven rear wheel drive. Exports to Europe followed as the S600 quickly gained respect, gaining popularity as a highly lightweight and speedy sports car. It was also to prove a success in races both inside and outside of Japan. The Tamiya model faithfully captures the essence of the S600, thanks to new tooling and updated parts from the S800 model kit. About the model: • This is a 1/24 scale plastic model assembly kit. • The compact, lowdown form of the S600 is covered with accuracy. • This kit is based upon Tamiya’s accurate kit of the S800 (Items 24190, 89657). New parts are included to depict S600-specific features such as the front grille and bumper unit, hood, radiator-top parts, brake and reverse lights, plus wheels. • The unique rear chain-drive unit-based trailing arm suspension is concisely and realistically captured, as is the front double wishbone setup. • Parts are included to recreate the S600 as an open top with folded down roof, or as a hard top. • Decals and metal transfers have been newly designed for this model. Detailed Plastic Kit of model Honda S600 Convertible/Hardtop in scale 1:24   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Lexux LFA V10 Roadver. w/PE-Parts

€82.99

Article number: 300024319 Product: 1/24 Lexux LFA V10 Roadver. w/PE-Parts Limited to only 500 units worldwide and coming at a bargain price of US$375,000 is Toyota's exotic sports car the Lexus LFA. Developed with the aim of creating a world-class supercar, the ultra-exclusive Lexus LFA is infused with the latest automotive technologies. It features a 4.8-liter V10 engine, a chassis equipped with a rear trans-axle, an interior which incorporates carbon fiber, and a sleek aerodynamic body.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mitsubishi Lancer Evolution VI

€31.49

Article number: 300024213 Product: 1/24 Mitsubishi Lancer Evolution VI ★This is a plastic model assembly kit depicting the car which formed the base for Mitsubishi's 1999 rally challenge. ★From the front bumper designed to boost cooling, to the 2-step rear wing, the form of the car is captured in style. ★Features recreation of the radiator visible through the nylon mesh front grille. ★Choose whether to attach front fog lamps. ★Realistic depictions of suspension and interior.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan 370Z Heritage Edition

€49.99

Article number: 300024348 Product: 1:24 Nissan 370Z Heritage Edition Truly iconic car names are few and far between, but one must surely apply that moniker to the "Z-Car", sold in Japan as the Fairlady Z – from its debut as the 240Z (S30) in 1969 through to the present day, it has delighted sports car fans across the world. The current 370Z design has been tweaked and updated since its first release in 2008, and in May 2018 a special Heritage edition was released with racing stripes and an interior design inspired by the special "Zap" edition of the classic 280Z. Tamiya has faithfully reproduced this heritage edition Z in 1/24 scale with all the detailed edition parts faithfully depicted.

Model car kits 1:24

1:24 Nissan GT-R Streetversion

€70.99

Article number: 300024300 Product: 1:24 Nissan GT-R Streetversion At the 2007 Tokyo Motor Show, much attention was paid to the new Nissan "multi-performance sports car." This model had dropped name Skyline and became simply the Nissan GT-R. Along with the name change, the car also had some other mechanical changes, especially under the hood. Gone is the straight six, and in its place there is a new twin-turbo V6, which has an amazing 480 horse power with 60kg of torque. With amazing speed and cornering ability, the GT-R has reached the super car plateau. Nissan GT-R   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Skyline 2000GT-R Str. Custom

€51.99

Article number: 300024335 Product: 1/24 Nissan Skyline 2000GT-R Str. Custom The hard-top version of the Skyline 2000GT-R was released in 1970 and packed a serious punch with a detuned version of the inline-6 engine seen on the Nissan R380 prototype racing car. The "hakosuka", as it is affectionately known in Japan, is still a Japanese racing legend today, thanks to an incredible 50 total wins achieved in partnership with the 1969 4-door sedan GT-R. Now, it makes an appearance as a production model of the car with parts depicting popular customizations from its day, as well as a realistic driver figure.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 911 GT1 LeMans `96 Factory

€35.99

Article number: 300024186 Product: 1/24 Porsche 911 GT1 LeMans `96 Factory ★This is a plastic model assembly kit depicting the car which competed in the 1996 running of the 24 Hours of Le Mans. ★The low, side form of the car is recreated in style, with depictions of the midship twin turbo engine and suspension. ★Features a realistic interior with roll cage, plus a removable rear cowl component. ★Decals are included to recreate the livery.

Model car kits 1:24

1:24 Subaru Impreza WRC '99

€27.99

Article number: 300024218 Product: 1:24 Subaru Impreza WRC '99 The 1997 World Rally Championships saw a relaxing in the rules pertaining to vehicle modification. Subaru was the first team to take advantage of the leeway, bringing out the Impreza WRC. That machine featured all aluminum horizontal four cylinder turbo engine paired with a vertically mounted gearbox. The layout placed the gearbox in a balanced position behind the front axle, heightening manerverability and ultimately contributing to a Mnufactures Championship for that year. The bulk of the improvements to the 1999 model centered around the engine and gearbox. Foremost was the adoption of an electronically controlled throttle system. This system converts the position of the throttle in to electronic signals, heightening throttle response. The Impreza WRC was also equipped with a 6-speed, semi-automatic gearbox. This system enables sudden shifting, such as from 6th to 1st gear. Work is also continuing on the development of an electronically controlled damper system. The Impreza WRC is driven by J. Kankkunen, R. Burns and B. Thiry. Kankkunen and Burns finished in 1st and 2nd place respectively at both the 7th Argentina Rally and the 10th Finland Rally. The 8th Acropolis Rally was also taken by Burns, setting the scene for an intense contest in the latter half of the season.

Model car kits 1:24

1:24 Toyota Celica GT-Four

€24.99

Model car kits 1:24

1:24 Toyota G.R. TS050 HYBRID

€58.99

Article number: 300024349 Product: 1:24 Toyota G.R. TS050 HYBRID 2018 was a truly landmark year for TOYOTA GAZOO Racing and their TS050 Hybrid car, which made a huge splash in the racing world thanks to a refined design with great aerodynamics and a hybrid powertrain pairing a 2.4-liter engine and lithium-ion battery. Now, following on from Mini 4WD and R/C models, the car is a welcome addition to the impressive stable of racing cars in the Tamiya 1/24 Sports Car Series. About the Model - This is a 1/24 scale plastic model assembly kit. Length: 194mm, width: 79mm, height: 44mm. - The form of the 2018 version of the TS050 Hybrid is captured with superb accuracy: updated aerodynamics components (both exterior and interior), longer front fenders, and tweaked diffuser design. - A busy interior features depictions of the driver seat, lithium-ion battery and more. - Metal-plated part is used to recreate the silver section on the top of the cockpit. - Also included are decals for the numerous sponsor logos on the number 7 and 8 cars, plus masking stickers for use in the paint job. - Dedicated metal transfers recreate side mirror surfaces and headlight sections.

Model car kits 1:24

1:24 Toyota GT-One TS-020 LeMans ´99

€38.99

Article number: 300024222 Product: 1/24 Toyota GT-One TS-020 LeMans ´99 About the Toyota GT-One TS020 "The Longest Day in France", also known as the 24 Hours of Le Mans endurance race, takes place two hundred kilometers southwest of Paris, in the city of Le Mans. This high-speed circuit is made up of public roads closed off for the race, which stretch to 13.6 kilometers in length-the world's longest circuit track. Throughout the long history of the Le Mans, two or three major manufacturers have always fought for the top honors, but the 1999 race boasted six major contenders. The Toyota GT-One TS020 led the grueling 24 hour event right up until one hour before the finish, when it was struck with an untimely tire blowout, but still managed to finish second. Subtle refinements to the sleek carbon fiber composite body of the GT-One TS020 were conducted in the pursuit of optimal aerodynamics. The 3600cc V8 twin turbo R36V engine also underwent various modifications, improving power, torque, and fuel efficiency. About the Model • 1/24 scale plastic assembly model kit based on the GT-One TS020 of the 1999 Le Mans. • Overall length: 202mm, overall width: 84mm. • This model boasts faithful recreation of innovative aerodynamics. • Highly detailed nose and diffuser-just like the full size car. • Rear cowl is removable, allowing modeler to view the detailed V8 twin turbo engine even after completion. • Kit includes decals for Car no. 1 and 3. • Masking seals are also included for accurate body painting.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Supra

€28.49

Article number: 300024123 Product: 1/24 Toyota Supra During the early 1970's, the Toyota Motor Company of Japan ventured into the specialty car field, and soon established a reputation for producing cars with both quality and performance. Their "Supra" series is often described as a re-creation of Toyota's legendary 2000GT sports car, which was an excellent combination of high performance and elegance. Using their latest racing automotive technology, plus their uncanny design genius, the newly designed Supra made its sensational debut during February 1993. Massive and powerful are the words that can best describe this awesome specialty sports car. The top of the line Supra uses a 3-Liter, DOHC 24 valve, straight six cylinder, twin-turbocharged engine, capable of 320 horsepower and 43.6kg/m of torque. In contrast with the company's previous Supra model, which had a very fluid styling composed of gentle curves, the new Supra has a bold dramatic appearance due to its wider body and larger 17-inch wheels. An oversized rear wing has been installed to improve downforce performance during high-speed cruising. This Supra's newly refined suspension has one of the best road holding systems offered by any mass produced sports car, and with its ventilated disk brakes fitted at all corners, and the front end utilizing four piston calipers, it has unmatched stopping power. Toyota's Supra is this company's attempt to furnish a car that has uncompromised drivability, safety, high performance and relaxing comfort.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 A6M2b Zero Model 21 (Zecke)

€129.99

Article number: 300060317 Product: 1:32 Mits.A6M2b ZERO Fighter 21 About the Mitsubishi A6M2b Zero Fighter Model 21 (Zeke) The Japanese Zero Fighter plane was widely feared and respected by friend, foe and all who came into contact with it. A triumph of aerodynamic engineering and military science, the Zero Model 21 served in the skies across East Asia during early stages of World War II, contributing immensely to the Japanese war effort. It remains today an enduring symbol of that fierce and globe-spanning conflict. About the model •1/32 scale assembly kit of the Model 21 Zero Fighter. Length: 283mm, Width: 375mm. •Accurately reproduced curved cowling and fuselage are modeled from slide molding to accurately depict rivets and surface texture. •Realistically replicated Nakajima "Sakae" type 12 engine features propeller reduction unit, exhaust pipe and other detailed parts. •Both folded and extended wing tips included and can be used interchangeably even after assembly. •Durable and precision detailed metal parts depict landing gear system and pitot tube. •Seat belt incorporates photo-etched parts for extra realism. •Retractable landing gears increase display possibilities, while allowing model to be easily stored in package after assembly. •Features movable landing gears, rudder and flaps. •Includes standing and seated pilot figures and seven types of markings for planes which participated in Pearl Harbor attack. •Includes parts to depict any variation of Mitsubishi and Nakajima-built Zero Model 21. •Comes with wheel chocks and access steps. Includes posable display stand. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 Bo.F-15E Strike Eagle Bunker Buster

€149.99

Article number: 300060312 Product: 1:32 Bo.F-15E Strike Eagle Bunker Buster About the Boeing F-15E Strike Eagle w/"Bunker Buster" The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes. About the model The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air-to-air missiles. 1/32 scale, total length 600, total width 404mm. Faithfully recreates intrepid form of Strike Eagle. Main parts such as fuselage and wings are to be fastened with screws.Radar unit/nose side-access panel, and Vulcan Cannon hatch can all be opened and closed after assembly. Canopy and air brakes can be assembled in either the up or down positions. Cockpit, radar, and Vulcan Cannon are all recreated down to the finest details. Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber. Scope of delivery: Kit, instructions, decor   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 US Vought F4U-1D Corsair

€165.00

Article number: 300060327 Product: 1:32 US Vought F4U-1D Corsair This is the D variant of the popular Corsair World War II fighter plane. It uses new parts to recreate features specific to the F4U-1D, which was the first Corsair to be cleared for use on aircraft carriers. This fighter-bomber could carry drop tanks on new hard points under the wing root, and up to 8 rockets under the outer wing. It provided invaluable close support for ground troops during landings in places such as the Philippines and Okinawa, and continued to serve after WWII, in Korea. F4U-1D Specific Detail differences from previous variants: 1. The semi-bubble canopy was altered during production to remove upper side frames and improve visibility. 2. Propeller blades were thicker from the root. 3. Hardpoints under the wing root allowed carrying of bombs and drop tanks. 4. The tail wheel cover had a new fairing to improve aerodynamics. 5. Outer wing sections had extended metal areas with mounts for eight rockets total. 6. Cockpit floor window was scrapped.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Alum. Gunbarrel Leopard 2 A7V

€20.49

1/35th scale, HopUp parts for 35387 Leopard 2A7V   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. 25pdr Field gun w/Veh.(1)

€27.49

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Tank Comet A34

€52.99

Article number: 300035380 Product: 1:35 Brit. Tank Comet A34 Tamiya is proud to welcome the Comet to the 1/35 Military Miniature Series for the first time! At the end of WWII, the British Army developed the Comet – which became a base of later British Army tanks such as the Centurion - as a counter for the powerful German Tiger and Panther tanks. With the hull design based upon the structure of the existing armored cruiser tank Cromwell, the Comet employed a larger turret with a powerful 17-pounder gun. The Comet first saw action in the Operation Varsity in March 1945, and around 900 including ones produced after WWII were built.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Univer. Carrier Mk.II (5)

€21.49

Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit.Tank Cromwell Mk.IV Cruis.(1)

€43.99

Article number: 300035221 Product: 1:35 Brit.Tank Cromwell Mk.IV Cruis.(1) This is a plastic assembly model kit of the Cromwell Mk.IV Cruiser tank, which served alongside the Churchill infantry tank after the Normandy landings in June, 1944. The distinctive riveted armor and turret have been precisely reproduced. The large road wheels, which allowed the Cromwell to move quickly on the battlefield, have also been accurately rendered. Parts are included to depict features which were unique to Normandy: "Normandy cowl" ducts which prevented the exhaust gases from entering the tank and hedgerow cutters, which were attached to the front of the tank to allow it to move through the thick brush. Five kinds of decals and a tank crewman figure are included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 British MBT Chieftain MK.5 (3)

€25.99

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Dt. Pz.Kpfw. IV Ausf.G Frühe.Prod.

€56.99

Military model vehicles 1:35

1:35 Dt. PzKpfw. I Ausf. B (1)

€31.49

Article number: 300035388 Product: 1:35 Dt. PzKpfw. I Ausf. B (1) Tamiya is proud to welcome the German Tank Panzerkampfwagen I Ausf. B into our 1/35 Military Miniature Series, which means that the main German tanks of WWII are all in our line-up now. Although Germany had been forbidden to develop tanks after the defeat of WWI, it developed the Panzerkampfwagen I under the name of "agricultural tractor" to deflect suspicions of rearmament, and the Pz.Kpfw.I became a massproduced tank. The engine on the Ausf.B was upgraded to 100hp, nearly double the 57hp of the Ausf.A. Also, it had a 40cm longer hull, and a pair of 7.92mm MG13 machine guns were equipped. While the Pz.Kpfw.I was developed for training, it first saw live action in Spain during the Spanish Civil War, and was widely used in various situations such as the invasion of Poland and the Eastern Front. 1/35th scale, assembly kit, Model of the German Tank Panzerkampfwagen I Ausf.B, tools, paints and glue required   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set G. Sol.Field Brief.(5)

€13.99

Article number: 300035212 Product: 1:35 Fig-Set G. Sol.Field Brief.(5) This set depicts German soldiers from the middle stages of WWII in a variety of poses wearing winter uniforms and overcoats standing around a stove discussing battle strategies. ★It includes five figures depicting an officer and a noncommissioned officer looking over an open map, a soldier looking at his watch, another carrying a MG42 machine gun on his shoulder, and a squatting soldier. ★Also included in the set is a German shepherd figure lying down and accessories such as a newspaper and magazine. ★This set would go great in combination with winter-themed dioramas.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Front-Line Soldiers(5)

€11.99

Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1?   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. Infantry 1943-45 (5)

€17.99

Included: Assembly Kit, 1/35th Scale, 5 figures, user guide, accessories, Suitable for 300035381 tank kit   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Fr. Citroen Traction Staff Car (1)

€31.49

Article number: 300035301 Product: 1:35 Fr. Citroen Traction Staff Car (1) This famous French sedan was produced from 1934 to 1957 and featured a lightweight monocoque body with a high performance torsion bar spring suspension. It also had a spacious interior and featured a front-wheel drive system and a low center of gravity. The car proved to be very easy to handle and was used by the French Army, the occupying German Army, and the Free French forces. It was also used by German forces through out the European front and as far away as Russia. •Length: 125mm, Width: 48mm. •This is a 1/35 scale assembly kit model of the Citroen Traction 11CV. •The elegant form of the body and fenders has been accurately reproduced. •For easy assembly of the suspension, the number of parts is kept in check. •You can choose to assemble either open or closed front doors. •By assembling open front doors, you can enjoy viewing the the highly detailed interior. •Set includes one driver figure. •Markings for the German Army x 2, French Army x 1, and Civilian vehicle x 1 are included.(Total 4) •This model will look great in a diorama on its own or with other 1/35 scale models.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)

€7.19

Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Horch 4x4 Type1A Veh. (1)

€17.99

Scope of delivery: kit, instructions. decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Marder III M Normandy

€48.99

Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.

Military model vehicles 1:35

1:35 Ger. PzKpfw. II Ausf. A/B/C (1)

€47.99

Article number: 300035292 Product: 1:35 Ger. PzKpfw. II Ausf. A/B/C (1) After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II tanks were manufactured. They led the surprise invasion on Poland and were the main tanks used in the attack on France. Later, they were successfully used in reconnaissance missions until the end of the war. About the Model •1/35 model of the German Panzerkampfwagen II tank. •Supplemental armor plate parts can be installed in the same manner as the actual tank. •Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants. •Assembly-type tracks feature single-piece sections for effortless construction. •Comes with a commander figure and three kinds of markings for the French campaign. •Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw.IV Aus.F w/Motorc. DAK

€50.99

Assembly kit, 1/35th scale, limited Set, paints and cement are separate required

Military model vehicles 1:35

1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)

€43.99

Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.

Military model vehicles 1:35

1:35 Ger. SdKfz.161/2 Panzer IV J (1)

€47.99

Article number: 300035181 Product: 1:35 Ger. SdKfz.161/2 Panzer IV J (1) For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schürzen" armor additions. Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension. Additionally, the kit features belt type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)

€23.99

Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.171 Panther G Late V.(2)

€46.99

Article number: 300035176 Product: 1:35 Ger. SdKfz.171 Panther G Late V.(2) A constant threat on account of its refined design, the Panther was a feared opponent for enemies of the German Army. In fact, a number of Panther variants were produced and perhaps the most refined was the late version of the Type G, which is recreated by this plastic model assembly kit. The model breathtakingly recreates the form of the tank, from the well-armored mantlet to the exhaust flame dampers for night combat, and right down to details such as the heater air intake. Of course, typical late production variant additions such as turret-top parts are all there, as are 2 figures in realistic pose, plus 3 marking options recreating Ardennes Front unit Panthers. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.182 Königstiger Por-T(1)

€47.99

Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.182 Pz VI Kingtiger (1)

€48.99

Article number: 300035164 Product: 1:35 Ger. SdKfz.182 Pz VI Kingtiger (1) With 150mm of frontal armor and 80mm on its sides, the King Tiger was far from a welcome sight for hostile troops; this was rather exacerbated by the awe-inspiring L/71 88mm main gun. This plastic model captures the production turreted King Tiger in all its glory, with masterful depiction of the hull and its weld lines. The opening turret escape hatch allows admiration of the interior and gun breech, even after completion of the kit. Nylon mesh is included in the kit to recreate engine cover nets. Includes belt-type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.232 Scout Car Afr. (2)

€62.99

Article number: 300035297 Product: 1:35 Ger. SdKfz.232 Scout Car Afr. (2) In the early stages of WWII, the German military often used the Sd.Kfz.231 series vehicles for reconnaissance missions. One of these heavy armored cars was the Sk.Kfz.232, which was equipped with a long distance wireless radio with a large antenna protruding from the top of the upper hull. In the turret was a 2cm gun and a MG34 machine gun. The 8- wheeled, Sk.Kfz.232 had an on-road top speed of 90km/h, front and rear driving positions, and a superb 8 wheel drive system. The Sd.Kfz.232 performed extremely well and proved its worth in a number of roles on many fronts from Europe to North Africa to Russia. •Various kinds of equipment like early type jerry cans and tools are included adding further realism. •Comes in a newly designed package with desert themed artwork. •Enhancing the impression of the North African front is a German officer figure wearing a tropical uniform. •A soldier figure for the turret is also included. •Photo-etched parts such as light protecting net s and an aluminum barrel for the 2cm gun are included. •Comes with decals for the North African front (2), Balkans front (1), & Kursk front (1). •Displaying this armored car with other 1/35 scale models such as Item 35286 German Armored Car Sd.Kfz.222 would be an interesting diorama. Model kit, Scale 1:35, Vehicle, 2 Figures, Manual, Decal, Length 193 mm.

Military model vehicles 1:35

1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)

€33.99

Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.9 Famo w/ Lowloader(12)

€159.99

Article number: 300035246 Product: 1:35 Ger. SdKfz.9 Famo w/ Lowloader(12) About the Model ★After the impressive debut of the FAMO kit, Tamiya began to receive many requests for variations. Among the several types of FAMO to appear during WWII, the most frequently requested was the Sd.Ah.116 trailer-towing version. ★Stretching over 640mm, Tamiya's new beast-of-burden is 50mm longer than the Dragon Wagon and is the longest kit in the MM series. ★The massive trailer unit consists of both the front and the rear wheeled pieces on either ends of the long platform piece. ★Real rubber tires for heightened realism. ★This kit features ample metal and metal plated parts for various accessory pieces such as a chain for fixing the tank in tow to the platform. ★This kit brings back the eight figures of four poses included in the original "FAMO" kit, plus four all-new figures of three poses acting out a tank loading scene at the rear of the trailer.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Sturmtiger 38cm RW61 (1)

€52.49

Article number: 300035177 Product: 1:35 Ger. Sturmtiger 38cm RW61 (1) In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully reproduced as a plastic assembly model kit. The main hatch on the superstructure can be depicted in either open or closed position, the rocket launcher and escape hatch are moveable even after assembly, the loading crane can also rotate, and the heaviness of the tracks is also realistically depicted. Also included in the set is one figure and four rockets.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 German Heavy Tank Destroyer Elefant

€76.99

Article number: 300035325 Product: 1/35 German Heavy Tank Destroyer Elefant This is a 1/35 scale assembly model of the German Heavy Tank Destroyer Elephant. Extensive research was conducted by Tamiya's designers to bring the modeling world the most accurate rendition to date. Historical background In 1941, Porsche created a prototype tank which incorporated radical features including a gasoline-electric hybrid powertrain. In 1943, the tank was transformed into the Ferdinand tank destroyer armed with an 8.8cm PaK 43 L/71 gun housed in a large box-shaped superstructure and 90 units were produced. During the Battle of Kursk, they demonstrated superior anti-armor capability to knock out T-34 and KV-1 tanks at long range, but their slow speed and unreliability resulted in many being immobilized by mechanical troubles. In 1944, 50 surviving Ferdinands were given modifications, including the addition of a machine gun, a commander's cupola, and were re-designated with the name Elefant. The Elefant saw combat on the Italian and Russian fronts, and some fought until the very end of WWII during the Battle of Berlin.

Military figures & Accessories 1:35

1:35 German Infantry Mid-WWII (5)

€20.49

Article number: 300035371 Product: 1:35 German Infantry Mid-WWII (5) • This is a 1/35 scale plastic figure assembly kit set. • Contains parts for 5 figures in realistic pose: a non-commissioned officer (NCO) with binoculars, a rifleman with his foot on some rubble, another with cases and one with grenade cases on the ground, plus a machine gunner. • Figures are depicted in mid-WWII M40 uniform, jack boots and suspenders. NCO and kneeling rifleman have a choice of helmet or cap. • A plethora of newly-molded accessories includes Kar98k rifle, MG34 machine gun, MP40 submachine gun and more.

Military model vehicles 1:35

1:35 Hummel (Late Production) (3)

€60.99

Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.

Military model vehicles 1:35

1:35 Modern JGSDF Type 10 Tank

€63.99

Article number: 300035329 Product: 1:35 Modern JGSDF Type 10 Tank The Type 10 is the Japan Ground Self Defense Force’s next generation main battle tank. Now, it joins its predecessors the Type 61, Type 74 and Type 90 in the Tamiya 1/35 Military Miniatures series. The Type 10 was first shown to the world in 2010 (that’s where the 10 in its name comes from), and was assigned to units starting in 2012. Among the many advances from the previous Type 90 model are a Japanese-made 120mm smoothbore main gun, and the so-called C4I system. This state-of-the-art computerized system allows the Type 10 to be connected to a computer network and share information with other tanks, enabling co-ordinated actions. About the Model • 1/35 scale plastic assembly kit • Features detailed and faithful replication of modular armor, as well as the 120 mm main gun. • Lower hull rubber skirts and belt-style tracks ensure the base of the model is also highly realistic. • Includes 2 figures to add to the realism of modelers’ dioramas. • Comes with 3 sets of markings.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 U.S. M1A2 SEP Abrams TUSK II

€83.99

Article number: 300035326 Product: 1:35 U.S. M1A2 SEP Abrams TUSK II During the 2003 Invasion of Iraq, the U.S. deployed its latest M1A2 Abrams main battle tanks and these continued to be used in Iraq during the subsequent occupation period. Due to the threats posed by RPGs and improvised explosive devices (IEDs) in the urban environments, the tanks were upgraded with more protection in the form of Tank Urban Survival Kits (TUSK I) in 2004. The upgrade included features such as reactive armor on the hull sides, hull underside armor to protect against land mines, an M2 machine gun mounted above the main gun barrel, infrared cameras for the crew, and an external telephone for communication with accompanying infantry. A further development called TUSK II added features such as tile-shaped reactive armor to the turret and hull sides, armored shield for the commander, and a rear-view camera. These kits could be installed in field depots in about 12 hours and different tanks had different features equipped. About the Model • 1/35 scale plastic assembly model kit of the latest M1A2 SEP Abrams. • Includes parts to depict both TUSK I and TUSK II features. • Detailed parts such as the armored shields for the commander and loader and barrel-mounted M2 machine gun are included. • Intricate curves of the reactive armor tiles are accurately reproduced. • Comes with one commander and one loader figure, both depicted with body armor. • Two marking options for TUSK I and one marking option for TUSK II-equipped tanks included.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US 2.5to Cargo Truck (1)

€43.99

Article number: 300035218 Product: 1:35 US 2.5to Cargo Truck (1) During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish. The model depicts the doors which had canvas parts and its cargo area with the covers removed to allow you to recreate a commonly seen scene of WWII. Five kinds of markings and a seated driver figure are included.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 US Infantry Scout Set (5)

€20.49

Article number: 300035379 Product: 1:35 US Infantry Scout Set (5) Tamiya is delighted to announce the release of a U.S. infantry set to follow the popular German army set (Item 35371 released in 2019). Various series of the short-sleeve M41 jacket and leggings had been the staple of the American Army uniform around June 1944 when the Invasion of Normandy occured, but from summer in that year onward, the new common uniform was developed for paratrooper, armored and mountain divisions, and the M43 field jacket and 2-buckle boot became common. It’s been 27 years since the last new release of a U.S. infantry set (Item 35192), so do not miss this chance to get these figures in multipurpose pose.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M113 Arm.Cavalry Assault Veh.(3)

€25.99

Article number: 300035135 Product: 1:35 US M113 Arm.Cavalry Assault Veh.(3) With a cupola-cum-gun shield on the M60 machine gun, the M113 ACAV (Armored Cavalry Assault Vehicle) was an improvement on its base, the M113APC (Armored Personnel Carrier). This plastic model assembly kit accurately captures the M113 ACAV, of course including the added cupola/gun shield, and also recreating the crew seats, engine and more in the interior. Three figures in realistic pose are included in the kit.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M18 Hellcat Tank Destroyer

€48.99

Military model vehicles 1:35

1:35 US M36 Tank Destroyer (1)

€45.99

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M5A1 Light Tank w/Mortar (4)

€29.99

Article number: 300035313 Product: 1:35 1:35 US M5A1 Light Tank w/Mortar (4) The M5A1 light tank which was developed from the M3 Stuart light tank was put into production from January 1943. It was powered by twin four-stroke V8 300hp Cadillac gasoline engines which enabled a top speed of 58km/h. It came armed with a 37mm main gun and two 7.92mm machine guns and featured additional armor plating on the turret's right side to protect the anti-aircraft machine gun. Approximately 6,800 units were produced and were mainly used in reconnaissance roles at the Italian and North West European Fronts.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US MBT M1A1 Abrams (2)

€42.99

Article number: 300035156 Product: 1:35 US MBT M1A1 Abrams (2) This is a 1/35 scale plastic assembly kit model of the U.S. M1A1 Abrams Main Battle Tank, the world’s most powerful tank which featured 120mm smoothbore gun, superb fire-control system that uses a laser rangefinder, and an impressive gas turbine engine. The massive, dynamic form of the tank has been realistically reproduced. Details such as engine grille and welded sections on armor plates have a rich finish. The model features 12.7mm and 7.62mm guns as well as smoke dischargers. Nylon mesh to depict the rear rack is included to enhance realism. In addition, a commander and a loader figures are also included in kit.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US MBT M1A1 Abrams w/Mine Plow(2)

€49.99

Article number: 300035158 Product: 1:35 US MBT M1A1 Abrams w/Mine Plow(2) Minefields were a constant hazard for invading U.S. forces during the Persian Gulf War of 1991; chief among their countermeasures was the trusty M1A1 tank fitted with a mine plow. This plastic model assembly kit expertly recreates such an M1A1 Abrams with mine guard and plow blade equipment depicted using separate parts. Metal chains and enamel wire are included, to be employed in the recreation of the roller at the front of the vehicle. Modelers can choose to assemble the model with hatches open or closed, and will be delighted by the range of accessories, including spare wheels, ammo cases and more! The kit comes with a full body commander figure and loader torso figure to further enhance its realism. Scope of delivery: kit, instructions, decor   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Med.MBT M48A3 Patton (2)

€27.99

Article number: 300035120 Product: 1:35 US Med.MBT M48A3 Patton (2) This is a 1/35 scale plastic model kit of the American M48A3 Patton tank, which served with distinction during the Vietnam War. ★The tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet is accurately reproduced. ★Details such as the searchlight and machine gun cupola are also brimming with realism. ★The kit includes accessory parts such as an engine exhaust snorkel, jerry cans, and spare track links as well as 2 tank crew figures.

Military model vehicles 1:35

1:35 US Med.Tank M4 Sherman Ea.(3)

€35.99

Article number: 300035190 Product: 1:35 US Med.Tank M4 Sherman Ea.(3) This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory. The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch. Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced. Modellers can also enjoy turret interior details such as the main gun breech and radio equipment. Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included. Comes with driver and radio operator torso figures as well as 1 commander figure.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Tank M41 Walker Bulldog (3)

€19.49

Article number: 300035055 Product: 1:35 US Panzer M41 Walker Bulldog (3) This is a 1/35 scale plastic model assembly kit depicting the M41 Walker Bulldog. ★The compact form of the 72mm gun-toting M41 is captured in style. ★From accurate surface textures to depictions of weld lines, there is plenty of detail. ★Comes with decals to depict either a U.S. or a Japan Ground Self Defense Force vehicle. ★Includes a commander figure and two soldiers to add further life to your model.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Willys Jeep MB 4x4 (1)

€21.49

Article number: 300035219 Product: 1:35 US Willys Jeep MB 4x4 (1) Without a doubt the Jeep Willys MB occupies a significant position in the whole automotive history. The origin of the Jeep vehicle dates back to early 1941, when U.S. Forces ordered the Willys, Ford, and Bantam companies to develop prototypes of a small sized multi-purpose 4-wheel drive vehicle. During the early stage of WW2, Germany had achieved outstanding successes by using motorized troops with their "Blitzkrieg" tactics. It became a pressing need for allied nations to possess tough and reliable vehicles with excellent cross-country ability. In November 1941, the Army, with alterations on the front grille and hood to the Ford design, chose the Willy"s vehicle as the basis for the mass production model. This marked the birth of the Willys MB (Model B) that provided unmatched ability to transport Allied troops during the conflict. The early Willys MB had a welded, slat type front grille. Due to the necessity of increasing production, the Army ordered Ford to join the mass production using the Willys MB"s blueprints. It was designated the GPW, and a simple, pressed steelfront grille was introduced. During WW2, the Willys MB and Ford GPW ran over every battlefield. As a means of transit for soldiers, it played an important role in bringing the Allied victory. It was also used for liason, command, communication and sometimes even as an ambulance for a light firearms carrier. Production reached approximately 640,000 units by August 1945.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Brit.BSA M20 Mot.c./Mi.Police

€20.49

Article number: 300035316 Product: 1/35 WWII Brit.BSA M20 Mot.c./Mi.Police The Birmingham Small Arms Company has a long history as a firearms manufacturer and was also well-known as the world's largest motorcycle manufacturer during WWII. In 1939, BSA began production of a military version of their M20 commercial motorcycle that was fitted with a Lucas light and other additional equipment. It was powered by a 12hp single-cylinder 500cc side-valve engine and offered superb reliability and ease of maintenance. Modifications were made during the course of the production and late-war motorcycles featured an air filter fitted onto the fuel tank. Over 126,000 units were produced during the war and most of them were deployed with the British Army. They saw service on every front for a wide range of duties including liaison and supply convoy escort. Some were also used by the RAF and British Navy. After the war, the M20 continued to serve throughout 1950s and some were even used until the end of the 1960s.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Ger. Cargo Truck 3to (2)

€44.49

Article number: 300035291 Product: 1:35 WWII Ger. Cargo Truck 3to (2) About the 3Ton 4x2 Cargo Truck The German army in WWII used a wide variety of wheeled vehicles as part of their overall strategy of fast mechanized warfare. Among the most widely used was the 3Ton 4x2 Cargo Truck, a truck design that was first produced in the 1930s. Featuring a dependable 6-cylinder gasoline engine,the 3Ton 4x2 Cargo Truck could take on a very large payload disproportionate to its size. They proved to be not only extremely reliable, but also very versatile, and were employed in a wide variety of roles, including fuel truck, ambulance, radio truck, as well as general-purpose cargo truck. About the Model •High-quality 1/35 scale assembly model kit of the 3Ton 4x2 Cargo Truck. •This kit is an all-new molding, and is much more accurate than kits current on the market. •The actual trucks chassis had a forward slant (designed to balance the cargos weight), and this unique feature has been accurately reproduced. •Suspension features a reasonable number of parts for easy assembly without sacrificing detail.- Driver and navigator figures included. •Accessory set of fuel drums and jerry cans also included for a full cargo load. •Comes with 4 types of markings, including both German army and Luftwaffe units. •To aid with painting, window masks will be included for the first time in a military model. •The actual truck served from the 1930s to the end of the war on all battle fronts, so this model can be displayed together with a wide range of other Tamiya 1/35 scale vehicles and figures such as Sturmgeschutz III Ausf. B and King Tiger. Model kit, Scale 1:35, Vehicle, 2 Figures, Manual, Decal, Length 174 mm.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII US Ford GPA Amphibien-Fhz. (3)

€36.49

Article number: 300035336 Product: 1:35 WWII US Ford GPA Amphibien-Fhz. (3) The Ford GPA was a unique vehicle which was deployed not only on the U.S. side by the Army and Marine Corps, but also later by Russian forces. It was often called a "seep" (an abbreviation of "seagoing jeep") on account of its amphibious nature. The front-engine 4WD vehicle shared much of its design and parts (including the engine) with Ford's GPW. Around 12,800 units were produced by 1943. This kit includes a variety of new parts to update Item 35043 U.S. Amphibian Ford GPA Kit.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Zimmerit Sheet Elefant

€9.89

Article number: 300012644 Product: 1/35 WWII Zimmerit Sheet Elefant Simulating Zimmerit on military models using putty enhances the model’s presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on the recently announced 1/35 scale German Heavy Tank Destroyer Elefant. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved. Two different coating patterns are included to match the kit-included marking options. About the Item • Zimmerit Sticker Sheet x1 • Compatible with 1/35 German Heavy Tank Destroyer Elefant (35325)

Military figures & Accessories 1:35

1:35/1:16 WWII Figure Insignia Decal-Set

€10.49

Article number: 300012625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. 1/16 1/35 SCALE WWII GERMAN MILITARY INSIGNIA DECAL SET   Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 Jap. Yukikaze Destroyer

€87.99

Article number: 300078020 Product: 1:350 Japanese Destroyer Yukikaze January 20 1940 saw the completion of construction of the Japanese Kagero class destroyer. Along with her sister ships Hatsukaze, Amatukaze, and Tokitukaze, she became part of the 16th destroyer division under the command of the light cruiser Jintsu. At the beginning of WWII, the 16th destroyer division was part of the force which captured the Philippines, and on December 5 1941, she took part in the fierce fighting with American forces near Palau and supported the invading forces at Legazpi. After wards, she saw action throughout the Pacific Ocean at the Dutch East Indies, Midway, Guadalcanal, and the Solomon Islands. The Yukikaze also participated in the withdrawal of Guadalcanal,also participated in sea battles at the Marianas and the Leyte Gulf. Throughout WWII, the Yukikaze took part in numerous naval battles, escort duties, and supply runs, and always returned safely from each sortie. She was among the few Japanese warships and the onl yone of her class still operational at the end of the war, and can be called the "lucky destroyer." As part of the post-war reparation agreement, the Yukikaze was transferred to the Republic of China, and in 1966 she became a reserve training ship. This is a 1/350 full display model. Model depicts the Yukikaze as she appeared during the 1945 Ten Ichi Go operation (Battle for Okinawa). Parts included to build a waterline model or a display model with full hull. It is possible to rotate the guns and torpedoes after assembling thanks to polycaps. ABS has been used for the masts to ensure strength. Photo-etched parts are prepared for the ladders, radio antennas etc. Metal chains. Display stand included. Assembled model can be displayed in the package. Yukikaze 1/350

Model ships 1:350

1:350 US Battleship New Jersey BB-62

€124.99

Article number: 300078028 Product: 1:350 US Kampfschiff New Jersey BB-62 The BB-62 USS New Jersey was the most decorated battleship in US Navy history from 1943 to 1991. In 1943 she was commissioned as the second of six Iowa-class battleships. Ships five and six, the BB-65 Illinois and the BB-66 Kentucky, however, were no longer completed and ultimately dismantled again. Like the other Iowa-class ships, the USS New Jersey had a displacement of 45,000 tons, an output of 212,000 hp and was armed with nine 16-inch (40.6 cm) guns spread across three triple turrets (2 fore and 1 aft) with a maximum range of up to 40 km. The ships of the Iowa class were 270.4 m long and had a relatively narrow hull of a maximum of 33 m, so they could easily pass the Panama Canal.

Model ships 1:350

1:350 US CVN-65 Enterprise Flugzeugträg.

€174.99

Enterprise   Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 WWII Ger. Battleship Tirpitz

€82.99

Article number: 300078015 Product: 1:350 WWII Ger. Battleship Tirpitz The sole sister ship of the Bismarck, the Tirpitz was a perpetual worry for the Royal Navy since its presence in Norway was a threat to Allied convoys. Considerable resources were spent countering her potential moves until she was finally sunk by Royal Airforce bombers. Tamiya now brings you this marvel of German engineering as a highly-detailed 1/350 scale assembly kit display model. The elegant lines of the Tirpitz are accurately reproduced and distinguishing features that set her apart from the Bismarck such as quadruple torpedo tubes are also recreated in great detail. The model comes with a specially made display base and a beautiful nameplate for an impressive display. 1/350 Tirpitz

Model ships 1:350

1:350 Yamato Wooden-Deck Sheet

€30.99

Article number: 300012645 Product: 1:350 Yamato Wooden-Deck Sheet This set of deck sheets allows easy and beautiful reproduction of the wooden deck on Item 78025 1/350 scale Japanese Battleship Yamato. This 2-piece sticker has been pre-cut to match the shape of Yamato’s deck for easy application. Deck plank pattern is also precisely printed so there is no need for painting.

Model aircraft kits 1:48

1:48 Brit. Supermarine Spitfire Mk.I

€43.99

Article number: 300061119 Product: 1:48 Brit. Supermarine Spitfire Mk.I The Supermarine Spitfire needs little introduction, one of the best-known aircraft deployed by the Royal Air Force in the Battle of Britain, as British and German forces struggled for control of the skies over the English Channel. The Mk.I had a streamlined form with elliptical wings designed for speed, and was powered by a Merlin engine. This legendary bird has received a complete makeover from Tamiya’s designers with new tooling for an updated and more accurate appearance in the 1/48 Aircraft Series! • 1/48 scale plastic model assembly kit. • Can be assembled to recreate many of the extensive Spitfire Mk.I variants. • Points of interest include superb detailing in areas such as the cockpit and panel lines. • Separate parts are used to recreate main landing gear and horizontal stabilizers. • Comes with 1 figure depicting a seated pilot. • Photo-etched parts are included to recreate radiator, oil cooler, gun sight, seatbelt components and more! • 3 marking options.

Military figures & Accessories 1:48

1:48 Diorama-Set Jerry Can&Barrel

€11.79

Article number: 300032510 Product: 1:48 Diorama-Set Jerry Can&Barrel Originally used by the Germans, Jerry cans Ewere soon used by the Allies as well to transport fuel and water. Set includes drum cans, Jerry cans, bags and other equipment for use with 1/48 MMV series models. Comes with both Allied and German versions. Model kit, Scale 1:48, Jerry can, Fuel drums, Manual.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 F-14A Late Carrier Launch Set

€114.99

  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 F-16CJ Fighting Falcon Lockheed Mar

€62.99

Article number: 300061098 Product: 1/48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.

Model aircraft kits 1:48

1:48 Fairchild Republic A-10A Thunder.II

€38.49

Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Messerschmitt Me262 A-1A

€44.99

Article number: 300061087 Product: 1:48 Ger. Messerschmitt Me262 A-1A About the Messerschmitt Me262 A-1a The revolutionary Messerschmitt Me262 was the first jet powered plane to see service. The construction of pre-production aircraft designated Me262 A-0 started in April 1944 but the fighter production version that should have been the first version to be mass-produced was delayed because of Hitler's strict contrary orders prioritizing the deployment of fighter/bomber A-2a version. Then, in November 1944, the Me262 A-1a fighter version was finally put into production. It was equipped with four 30mm cannons in the nose to counter Allied bombers and escorting fighters. Late production planes were equipped with hooks under the nose to mount rocket launchers and with 24 R4M air-to-air rocket under the wings making the Me262 the most feared German fighter by Allied pilots. About the model - Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. - 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. - The 4 X 30mm cannon mounted in the nose and cockpit have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. - R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. - Nose wheel well comes as a die-cast weight. - A pilot figure and decals for 4 different markings are included in the kit.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Ger. Nashorn Tank destroyer (1)

€30.99

Military model vehicles 1:48

1:48 Ger. Tiger I Late Prod.(Tentative)

€33.99

Article number: 300032575 Product: 1/48 Germ. Tiger I Late Prod.(Tentative) The German Tiger I Tank featured a powerful 88mm gun as well as excellent armor and was the greatest opponent to Allied forces during WWII. The late production version incorporated large steel road wheels with built-in rubber rings and an overhauled turret with periscope in front of the loader's hatch, the commander's viewport replaced by seven individual periscopes, and ventilators moved to the center for improved efficiency. Tamiya now brings this iconic kit, previously only available in 1/35 scale, to the 1/48 Military Miniature Collection series line-up.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 IJN Komatsu G40 Bulldozer (1)

€22.49

Article number: 300032565 Product: 1/48 WWII IJN Komatsu G40 Bulldozer(1) During WWII, Japanese forces developed the Komatsu G40 Bulldozer to aid in airfield construction. This was the first bulldozer manufactured by the Japanese. One hundred and forty-eight G40 bulldozers were built throughout the war. The G40 was sent to the northern and southern fronts, but due to the war few managed to reach their assigned airfields. Only one G40 survived the war, and can be seen at the Komatsu Techo Center in Shizuka, Japan. The Japan Society of Mechanical Engineers recognized the vehicle in 2007 as a Mechanical Engineering Heritage item. Model kit, Scale 1:48, Vehicle, 1 Figure, Manual, Decal, Length 75 mm.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Jap. A6 M5C Type 52 Zero Fighter

€16.99

Article number: 300061027 Product: 1:48 Jap. A6 M5C Type 52 Zero Fighter About the A6M5c Type 52 Zero Fighter In April 1939, shortly after the first Japanese Zero began test trials, modification drawings were already taking place on the zero in the Mitsubishi design room, to keep pace with the anticipated long air war in the Pacific. After the initial superiority of the Zero over allied aircraft began to wane, due to new U.S. types being introduced, Mitsubishi was hard pressed to maintain a superiority. The introduction of the Grumman F6F and Chance Vought F4U, provided a need for more firepower, armor protection and capability led the combined companies of Nakajima and Mitsubishi to produce the A6M5 series of aircraft. Total production of the Type 52 series consisted of 10,449 aircraft of which Nakajima produced 6,570. It first entered combat in August 1943 at a time when the Japanese forces were withdrawing from previously held islands in the South Pacific. The type 52c was the last of the A6M5 series, and the most effective against Allied aircraft due to its armament configuration three of 13mm machine guns and two 20mm cannons. A total of 93 Type 52 and 52b zeros were field modified to "c" weapons configuration. The 7.7mm machine guns, housed in the cowling of the Zero since its first introduction, proved to be less effective during the latter stages of the conflict, due to the heavier armor protection of allied aircraft, and their self sealing fuel tanks. The 13mm weapon was greatly more effective; however, due to its increased weight, only one of them could be housed in the cowling and one in each wing. The 7.7 machine guns were removed from the cowling and one 13mm gun was mounted on the right hand side. This installation also made necessary the enlarging of the right hand projectile exit and cowling tube input, of the cowling, giving it an unbalanced look when viewed from the top. Code named "Zeke" by the Allies, the Type 52c was powered by a 14 cylinder twin row NK1F Sakae 21 engine of 1,130hp, of which later versions were alcohol injected. In addition to the machine guns and cannons, the 52c could also carry four air to air rockets or four 30kg air to air bombs or two 60kg air to ground conventional bombs. The air to air systems were initiated in an attempt to disrupt B-29 operations by firing the rockets or dropping the small bombs on the formations. The bombs were timed to air-burst a certain number of seconds after release from the fighters.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Lockheed Martin F-16C Block 25/32

€72.99

Article number: 300061101 Product: 1:48 Lockheed Martin F-16C Block 25/32 About the F-16C Block 25/32 The F-16 has become one of the most widely-used jet fighters in the world, and has therefore undergone a series of upgrades throughout its service life with various air forces. The Block 25entered service in 1984 and featured upgraded radar and cockpit avionics. The Block 32 was the first upgrade affected by a program to use different engines in the F-16, and continued to use Pratt & Whitney engines, while the Block 30 used engines made by General Electric. The Block 32 has been upgraded to carry a wide range of weapons, including the LITENING II laser targeting pod, which enables precision attack capability with laser-guided bombs. About the Model Model represents the F-16C [Block 25/32]. New parts accurately reproduce the correct engine nozzle and smaller air intake that correspond to Pratt & Whitney powered F-16s. Main landing gear and gear well covers also depicted with new parts. Wing reinforcement plates for Block 32 recreated with phot etch parts (sold seperatley). Extensive weapons set features AIM-9L/M and AIM-9X sidewinders, AIM-120 AMRAAM, wing and centerline fuel tanks, and LITENING II targeting pod. New parts for GBU-12 laser-guided bombs feature clear parts to depict the laser guidance package for a more realistic finish. New ordinance racks on the wings accurately match their respective weapons. 1 pilot figure included and 3 sets of U.S. Air National Guard markings included. Add ITEM 12621 F-16 Fighting Falcon Detail Up Parts Set for the ultimate finish. 1/48 F-16C ÄBlock 25/32Ü   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Sd.Kfz. 251/1 Ausf.D Halftrack (2)

€31.99

Article number: 300032564 Product: 1/48 Sd.Kfz.251/1 Ausf.D Halbkette (2) Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece of their mechanized corps throughout WWII. The half-track could drive on difficult terrain and could easily tow various kinds of trailers and cannons. The Ausf.D was designed for ease of production and various types were produced, including those equipped with wireless radios and gun turrets. However, the basic version was the troop carrier which seated 12and came armed with two MG42 machine guns. The half-track could be seen at every front and had an on-road top speed of 53km/h and a 300km operational range. Length: 126mm, Width: 48mm. As there were many variations of the Ausf.D, this 1/48 assembly kit model of the GermanMtl.SPW. Sd.kfz 251/1 Ausf.D Schutzenpanzerwagen depicts a personnel carrier. Parts such as the interior and undercarriage have been accurately reproduced with less parts for easy assembly. The included assembly type tracks have a realistic sag effect. A commander figure wearing a winter uniform and a soldier figure carrying a MG42 machinegun on his shoulders are included. (Total 2) Accessories such as the Panzerschreck, grenade cases, infantry equipment and so onare also included in this set. Three kinds of decals depicting Normandy and the Eastern front units are included. Model kit, Scale 1:48, Vehicle, 2 Figures, Manual, Decal, Length 126 mm.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Tank destroyer Elefant

€33.49

Article number: 300032589 Product: 1:48 Tank destroyer Elefant This is a 1/48 scale assembly model of the German Heavy Tank Destroyer Elephant. The newly tooled 1/48 Elefant has extensive detail, even at this smaller scale, thanks to the extensive research conducted by Tamiya's designers to make the 1/35 scale rendition. The development of the full-size Elefant is an interesting case study in weapons development. Its chassis was developed by Porsche in the design competition for the Tiger I, but while Porsche was sure enough of its success to ready 100 examples of the chassis before the end of the competition, the design was not chosen. The "left over" chassis were turned into the Elefant on the orders of Hitler in 1942 - some 90 examples were built by May 1943. With armor plates, up to 200mm thick and a powerful long-caliber 8.8cm gun, it was a formidable piece of equipment, and served German troops until the end of WWII.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 US P-38 F:G Lightning

€75.99

Article number: 300061120 Product: 1:48 US P-38 F:G Lightning Lighting Strikes! The P-38 Lightning was developed by Lockheed in response to a 1937 proposal from the United States Army Air Corps. Its twin V12 engines were housed one each in twin booms that stretched back to the tailplane, flanking a central nacelle containing the cockpit and weaponry. A combination of superb range, firepower and carrying capacity ensured that the P-38 was a superior fighter-bomber, and it made a considerable impact after joining fighting in Europe in 1942. It was also active in the Pacific War from late that year, its escapades including the shooting down of Japanese Admiral Isoroku Yamamoto in 1943 that provided a significant morale boost for the Allied cause. About the Model ★This is a 1/48 scale plastic model assembly kit. Length: 240mm, width: 330mm. ★Exhaustive studies of actual P-38 aircraft enabled this precise recreation of the distinctive twin boom aircraft form, with particular highlights being early model slimline engine cowlings, wing shape and rounded canopy design. ★Integrated landing gear bay and wing spar parts ensure sturdy assembly and accurate recreation of angle. ★Choose between P-38F and P-38G canopy designs, with each able to be assembled open or closed. ★The detailed cockpit features recreations of the control wheel, bulletproof glass plate, rear-mounted radio equipment and more. ★One-piece tailplane horizontal stabilizer slides on and is secured by rudder components. ★Metallic finish decals are used on main and nose landing gear strut cylinders. ★The nose has depictions of four 12.7mm machine guns and the 20mm cannon. ★Weights are included to ensure correct balance of the model when on display. ★Comes with a seated pilot figure, two marking options and an informative background information leaflet in four languages.

Model aircraft kits 1:48

1:48 US Rep. P-47D Thunderbolt Bubblet

€47.99

Article number:300061090 Product: 1:48 US Rep. P-47D Thunderbolt Bubblet About the Republic P-47D Thunderbolt "Bubbletop" In May 1941, as the war raged in Europe, a single-engine fighter of more than 4t made its first flight. This fighter was the XP-47B, prototype of the Republic P-47 Thunderbolt of which a total of 15683 units will be built. Thanks to war experience, this aircraft was equipped with a 2000hp radial R-2800 engine, a supercharger and eight 12,7mm machine-guns. The XP-47B was to reach 633km/h and in January 1942, just after the USA went to war, the production of P-47B began. It was followed by the P-47C that incorporated various improvements and, from April 1943, by the P-47D, the most built version. The P-47D was equipped with an R-2800-59 engine, which can develop up to 2300hp with combat emergency water injection system engaged. The ducts that were passing on the sides and below the cockpit to connect the supercharger placed behind the pilot's seat gave to this plane its massive aspect. Many sub-types of the P-47D, designated D-1 to D-40, were produced but the first versions were called "Razorback" because of their sharp edge dorsal fin. The D-25 sub-type, which was introduced around June 1944, was fitted with an electrically actuated bubble canopy in order to improve pilot visibility and increased capacity fuel tanks. This decision resulted in a completely remodeled plane shape. All subsequent sub-types were also fitted with the bubble canopy and became a characteristic feature of late production Thunderbolts. The P-47 "Bubbletop" proved to be an excellent, well-balanced fighter-bomber. About the model - Republic P-47D Thunderbolt "Bubbletop" plastic assembly kit. - 1/48 scale, Overall length: 230mm, Overall width: 259mm. - This is the representation of P-47D late production that was nicknamed "Bubbletop". - The massive form of the plane, especially its belly and its cowling, has been accurately reproduced. - Flaps come as separate parts and can be attached in the up or down position. - Parts for replication of 3 types of mirrors, gun sights and 4 types of propellers are provided. - Engine cowling flaps and the intercooler air outlets on each side of the fuselage can be represented in the opened or closed position. - Parts for replication of 500-pound bombs, rocket launchers and 3 types of drop tanks are part of the kit. - A pilot figure and decals for two different markings are included.   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 WWII US Re.P-47D Thunderb.Razorback

€47.99

Article number: 300061086 Product: 1:48 US Re. P-47D Thunderb. Razorback In 1943, the 8th Air Force was launching raids on Germany with its B17 and B24 from England. The aim was to destroy German main production factories. Unfortunately, losses during theses missions were very heavy and it became urgent to develop a fighter able to escort the bombers over enemy soil. The limited ranges of the Spitfire and P-38 Lightning did not make these fighters able to go further than Paris, leaving the bombers alone to fend for themselves for the rest of the flight. With the development of the P-47, this problem was overcome. The P-47 was the first single-seated fighter to be equipped with a supercharger, allowing it to fly at the same high altitude as the bombers. This high-flying fighter was armed with eight 12.7mm machineguns that proved very useful in the intense fighting that occurred in the European skies. Equipped with drop tanks for longer range, the P-47D was then able to escort the bombers all the way to the German border. The Thunderbolt also allowed many Allied pilots to become Aces. Bomber crews plagued day after day by intensive German interceptions, would remark that the presence of the P-47 was of great help.   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda CB750F 1979

€104.99

Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly.   Warning! Not suitable for children under 14 years.

Model ships 1:700

1:700 Jap. Yamato Schlachtschiff WL

€30.99

Japanese Battleship Yamato

Model ships 1:700

1:700 JMSDF FFM-1 Mogami

€24.99

Assembly model kit 1/700 scale, length: 190mm

Model ships 1:700

1:700 US Enterprise Aircraft Carrier WL

€17.99

Article number: 300077514 Product: 1:700 US Enterprise Aircraft Carrier WL The USS Enterprise CV-6 was the second Yorktown-class ship and entered service as the sixth aircraft carrier of the US Navy in 1938. In the Pacific War she was involved in 18 of 22 major naval operations. 15 times she was badly damaged, but the USS Enterprise kept returning to service, symbolizing the Navy's determination to achieve victory in the Pacific. In 1947 the USS Enterprise, affectionately known as the "Big E", was decommissioned and finally scrapped from 1958 to 1960. To this day she is the most decorated ship in the history of the US Navy. The TAMIYA model kit shows the famous aircraft carrier as it looked towards the end of World War II, including increased AA armament and Hellcat, Corsair, Avenger and Helldiver aircraft.

Model ships 1:700

1:700 WL Diorama-Set Harbour-Access.(11)

€5.39

S. Accessory Harbor

Model ships 1:700

1:700 WL Diorama-Set Ship&Boats (23)

€5.39

S. Accessory Tugger

Model aircraft kits 1:72

1:72 F-35B Lightning II

€45.99

Assembly kit, 1/72th scale, Length: 215mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 F-51D Mustang North American

€15.99

Article number: 300060754 Product: 1:72 F-51D Mustang North American Sketched out in a New York city hotel in April 1940, the North American Aviation Corporation NA73X went on to become one of the best fighters to come out of World War 2. The U.S. Army Air Corps gave it the title of P (for Pursuit) 51, and it was named Mustang by the British. Of the several variations of the Mustang, the P-51D is considered the definitive version and was the first to have the bubble canopy. More "D" models were built than any other variant, with a total of 9,603 being produced. Armed with six .50 caliber machine guns, three in each wing, with 400 rounds for each inboard gun and 270 rounds for the other four, plus underwing pylons for auxiliary fuel tans or 1000lb bombs, the Mustang was a true fighter pilots airplane. At the conclusion of WW2, Mustangs were in operation all over the world, flying in several nations air forces. When the Korean conflict broke out, hundred of F (for fighters) 51's were in Japan awaiting scraping. Because they possessed too slow speed maneuverability that was absent in the new jets then entering service, the F-51 was ideal to work with Forward Air Controllers (FAC's) on the ground in Korea. The major drawback to this was the F-51's liquid cooled engine susceptibility to anti aircraft and small arms fire when attacking ground targets. This caused the Mustang to have the highest loss ratio of any aircraft in Korea. A total of 194 were lost in three years, with only 10 being downed in combat with other aircraft. Detailed Plastic Kit of model North American F-51D Mustang in scale 1:72   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 I/T F-35A Lightning II

€47.49

Included: Assembly kit, 1/72th scale, Length: 218mm, paints and cement are separate required   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 ME-BF 109E-4/7 TRUP

€17.29

Article number: 300060755 Product: 1:72 ME-BF 109E-4/7 TRUP During the first half of the Second World War, the Messerschmitt Bf109 E was the main fighter of the German airforce. The E-4 housed a 1,100hp Daimler Benz DB 601Aa engine and was armed with two 7.92mm machine guns on the nose, as well as a 20mm cannon on each wing. For some aircraft, bullet-proof glass was used to reinforce the front of the canopy. In addition, a 20mm canon, which ran through a tube in the propeller was supposed to be installed but was unsuccessful. Displaying superb acceleration and diving ability, the E-type planes overpowered the RAF's Hawker hurricane and equaled the Spitfire fighters in the Battle of Britain. However, with a flight range of only 560km, the E-4 planes were limited to just fifteen minutes of combat over British skies. Thus, the bombers were not given sufficient support and sustained heavy damage. As a result, the Luftwaffe's strategy to bomb England into surrender ended in failure. To deal with this drawback, the E-4 planes were equipped with additional 300L fuel tank. These improved fighters, called E-7, were first deployed at the end of 1940. After the Battle of Britain, the E-4/7 planes were sent to the front lines of Northern Africa. As the Bf109 F-type fighter's production was advanced, the E-4/7 was retired from the front lines. However, some veteran pilots continued to use the E-4/7 mainly for ground support duty until the summer of 1942. Bf109E-4/7 TROP   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Supermarine Spitfire Mk.I

€15.99

Article number: 300060748 Product: 1:72 SUPERMARINE SPITFIRE MK1 The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin' liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire's combat action in thwarting Germany's attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter's pride of place in the minds of England's men and women forever. Supermarine Spitfire Mk.I   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Carbon Decal Twill F

€8.19

Article number: 300012681 Product: Carbon Decal Twill F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/fine, 130x190mm sheet size, instructions.

Model car kits 1:24

Honda NSX

€32.49

Model car kits 1:24

Mazda RX-7 R1

€25.99

Model aircraft kits 1:48

Mitsubishi A6M2 Zero Fighter

€16.99

Model car kits 1:24

Mitsubishi GTO Twin Turbo

€26.99

Model car kits 1:24

Nissan 300ZX Turbo

€26.99

Model car kits 1:24

Nissan Skyline 2000 GT-R H. T.

€27.99

Model car kits 1:24

Renault 5 Turbo Rally

€27.49

Assembly model kit 1/24 scale, length: 157mm, Shaped Interior, 2 Figures, Chassis, manual included   Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

Skyray

€14.49

Article number: 300060741 Product: 1/72 Skyray Towards the end of World War II, many information about advanced aeronautical technology were captured in Germany by the U.S. Forces. One of them was an analysis of the studies carried out by Dr. Alexander Lippisch on delta winged aircraft. Based upon the information, the Douglas firm developed the F4D Skyray, the only operational interceptor with delta wings in the U.S. Navy. Starting the design in 1947, Douglas was awarded a contract for the construction and testing of two prototypes in December 1948. The first prototype took off on its maiden flight in January 1951. The second prototype flew shortly thereafter, and the airframe set two new world records, absolute speed record of 1,211 km/h and 100km closed course record of 1,171km/h, in October 1953. Having numerous improvements and refinements, the first production F4D-1 made its maiden flight in June 1954 and entered squadren service in April 1956. The distinctive 50 degree sweptback wings with round tips were equipped with leading edge slats and trailing edge elevons. A set of trimmers were installed on the inboard trailing edges of the wings. The outer portions of the wings could be folded upwards by oil pressure for carrier stowage. Although the Skyray never saw any combat, it proved its high capability as an interceptor with numerous world records and scramble actions in Taiwan in response to crises in the late 1950's. Detailed Plastic Kit of model Skyray in scale 1:72   Warning! Not suitable for children under 14 years.

Model car kits 1:24

Subaru Impreza WRC 2008

€39.99

  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

Suzuki RGV-T XR89

€33.99

SUZUKI RGV-? XR89

On-road RC cars (2WD/4WD)

Tamiya RC Honda Bundle

Product bundle consisting of: 1:10 RC Honda NSX Racing Whi PB TT-02 / Tuning set TT-02 / 1:10 wheel set 14 Sp.Design (4) black Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories.   Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set short (4), Ball bearing set (16)   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

RC trucks

Tamiya RC Volvo Bundle

Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1/10 RC Mercedes Benz 190E König-Pilsener TT-02

€174.99

Tamiya presents the Mercedes-Benz 190 E 2.5-16 EVO II 1991 on the popular TT-02 chassis. This car took part in the German Touring Car Championship (DTM) in 1991. Based on the compact Mercedes-Benz 190 E, it received improved aerodynamics with components such as mudguards, front and rear spoilers and a large rear wing. The engine is a 2.5-liter inline four-cylinder DOHC engine with 340 hp. In the same year, the works car, sponsored by the German beer brand König Pilsener, secured second place in the championship and took the manufacturers' championship from Mercedes-Benz. The 58750 TAMIYA 1:10 scale model is based on the proven TT-02 chassis. The wheelbase, ground clearance, track and gear ratio can be adjusted in many ways and the chassis can be quickly tuned into a racer with the countless optional tuning parts. The 4WD drive with central shaft, double wishbones and suspension struts on all four wheels ensure a true-to-life driving experience and optimum traction. The underside of the chassis has an extra smooth design and the battery compartment accommodates all standard battery types. The wheel drivers, which have attached dummy brake disks, are a visual highlight. The body is already pre-painted in PS-5 (black), PS-12 (silver), PS-31 (window tint) and the wheel arches are already cut out and the body holes pre-drilled. Required accessories: Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger 4WD kit model, TT-02 chassis, Elect. Speed controller, 540 Torque- tuned motor, painted polycarbonate body with attachments, cardan drive, struts, independent suspension, tread tires, tub frame chassis, instructions   Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1/12 Kawasaki Ninja H2 Carbon

€52.99

Article number: 300014136 Product: 1/12 Kawasaki Ninja H2 Carbon Beast on the Streets 2014 was a vintage year for fans of Japanese motorcycle manufacturer Kawasaki as it saw the announcement of the Ninja H2 at the Milan Motorcycle Shows (EICMA), a bike whose name can be traced back to 1971 and the popular 750-SS/Mach IV (H2) street bike. In the modern H2, Kawasaki designers strove to provide hitherto unexperienced acceleration, and they certainly pulled out all the stops with a powerful combination of a 998cc inline-4 engine and centrifugal supercharger, mounted in an elegant trellis frame and providing an impressive 200hp. The body is also a work of aerodynamic art, with an upper cowl featuring ram air intakes and bottom chin spoiler plus a stylish single headlight. Mirrors have a cut-off design to ensure they contribute aerodynamically, and plenty of electronic rider aids are also on offer. The special Carbon spec of the Ninja H2 released in 2017 had carbon fiber upper cowl, an enhanced 205hp engine and many other upgrades. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 174mm, width: 76mm, height: 96mm. ★Features a realistic depiction of the inline-4 engine and supercharger. ★H2 road bike spec upper cowl with headlight and mirrors, side cowls and rear cowls really capture the bike's aerodynamics in style. ★Metal-plated parts are used to recreate muffler, light cases and more. ★Synthetic rubber tires are given authentic tread patterns. ★Cowls, engine and swingarm are attached to the frame via screws. ★The Kawasaki "river mark" logo is rendered beautifully by a metal transfer. ★Clear parts are employed for headlight and taillight sections. ★Masking stickers are included to aid with demarcation in the painting of the fuel tank.

Model motorcycle kits 1:12

1/12 Repsol Honda RC213V '14

€57.99

Article number: 300014130 Product: 1/12 Repsol Honda RC213V '14 This model depicts the RC213V run by the factory-works Repsol Honda team in 2014 MotoGP. It was a momentous season for the team and for young sensation Marc Marquez. Marquez's 2014 season was sublime as he absolutely dominated with 13 wins and contributed to the Riders', Constructors' and Team Championships. The RC213V debuted in 2012 with new engine size regulations stipulating a maximum of 1,000cc. It features an aluminum double-tube frame and powerful 1,000cc Honda 4-stroke V4 with pneumatic valve system. The seamless transmission saves valuable power during shifts, while other hi-tech features include traction control, an anti-wheelie system, and engine braking control.   Warning! Not suitable for children under 14 years.

Model car kits 1:24

1/24 Lotus Europa Special

€45.99

Article number: 300024358 Product: 1/24 Lotus Europa Special This is a welcome first re-issue in ten years for our model of the Lotus Europa Special (previously Item 24212), with a number of updates to the kit. The Europa is a lightweight masterpiece of a sports car packed with features more likely seen on a racing car in its era: a sleek, low body, midship mounted engine and FRP frame components. Europas were manufactured between 1966 and 1972, and the Special was the final version of the car. It had a "big valve" 126hp 1,558cc four cylinder engine, five-speed transmission and alloy wheels. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 168mm, width: 73mm. • The honed Europa design and low body are authentically captured in 1/24 scale. • With the removal of the hood, the engine can be viewed even after completion. It features twin carburetor, 5- speed transmission, and shift linkage in the rear, plus new air funnels. • New parts are included for a rear wing and RS Watanabe option wheels. • Y-shaped backbone frame is molded together with rear radius arms as one piece. Front double wishbone suspension, stabilizer, rear upright, and engine are all attached onto this frame. • The floor is directly attached to the built up frame, and the body is mounted on top. • Features redesigned decals, plus new photo-etched parts (front grille) and seatbelt stickers. • A new instruction manual is planned. • A realistic cockpit sports instrument panel, high backed seats, 3-spoke steering wheel, and short gear shift. • Lotus logo, emblems and mirror surfaces are recreated by metal transfers.

Military figures & Accessories 1:35

1/35 Africa Luftwaffe Art Crew

€15.49

Article number: 300035343 Product: 1/35 DAK Luftwaffe Artillery Crew Increase your diorama options even further with this handy figure and accessory set. It contains parts which were previously only released as components of a larger kit in Items 35283 and 32408. They depict soldiers from an anti-aircraft artillery crew belonging to the Luftwaffe in Rommel’s famed Africa Corps. These men were usually assigned to an 88mm gun and in fact required to take on not only airborne targets but also heavily armored land vehicles such as the Matilda and M3 tanks. Technische Details: Detailed Plastic Kit of Model 1/35 Africa Luftwaffe Art Crew in Scale 1:35   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1/35 Ger.Pioneer & Goliath Set

€19.29

Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.

Military figures & Accessories 1:35

1/35 German Tank Crew Set

€19.99

Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits.   Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1/35 Hummel Metal Gun Barrel

€12.79

Article number: 300012688 Product: 1/35 Hummel Metal Gun Barrel ★Add even more detail to your 1/35 scale model of the German Self-Propelled Howitzer Hummel (Late Production) with this piece! ★The barrel is made from turned aluminum, and even features fine rifling detail at the tip.

Military model vehicles 1:35

1/35 JGSDF Light Armored Veh.

€46.99

Article number: 300035368 Product: 1/35 JGSDF Light Armored Veh. The latest kit to join the extensive 1/35 Military Miniature Series is this new kit of the Light Armored Vehicle, which recreates a domestic spec version of the vehicle such as that depicted in 1/48 by Item 32590 (previouslyreleased Item 35275 was an Iraq PKO spec vehicle). The Light Armored Vehicle is an integral part of Japan Ground Self-Defense Force (JGSDF) infantry units, key to the emphasis placed on mobility by recent policy changes. Around 1,900 in total have been provided to the JGSDF and the JASDF air arm. About the Model • This is a 1/35 scale plastic model assembly kit. Overall length: 128mm. • The unique form of the actual vehicle has been accurately replicated. • Features detailed synthetic rubber depictions of combat tires, transparent parts for headlights and tail lights, and a die-cast one-piece chassis for authentic weighty feel. • Assembly options include rooftop hatch in open or closed position, quadruple smoke dischargers (usually seen on command cars), and MINIMI machine gun. • A busy interior has recreations of seat, dashboard and accessories such as fire extinguisher. • Kit comes with seated driver figure depicted in the latest JGSDF body armor. • 3 marking options for vehicles with domestic JGSDF units are included.

Military model vehicles 1:35

1/35 M3 Stuart Late Production

€40.99

Article number: 300035360 Product: 1:35 US M3 Stuart Späte Produktion This 1/35 scale model faithfully depicts the M3 Stuart tank. It is a complete new kit with updated details compared to the Stuart model that has been offered for decades. The M3 Stuart was manufactured from March 1943 onwards and deployed not only by U.S. forces; it also saw action in Soviet colors. The late production variant of the tank had a rounded turret design with the cupola removed. It used a 37mm main gun, with numerous 7.62mm machine guns: one coaxial to the main gun, one on the front, on the turret and in the side sponson’s on certain variants.

Military figures & Accessories 1:35

1/35 Panther D P-E Grille Set

€6.79

Military model vehicles 1:35

1/35 Valentine Mk.II/IV

€49.99

Article number: 300035352 Product: 1:35 Brit. Valentine Mk. II/IV This is an all new tooled model of the British Valentine Infantry tank in 1/35 scale. British armor doctrine in the 1930s up to the outbreak of WWII called for 2 types of tank - more mobile cruiser tanks and heavy, slow infantry tanks. The Valentine was a prolifically produced example of the latter (7,315 units, more than 30% of British tank production in WWII). It was based upon existing cruiser tank designs and relatively easy to manufacture, a critical point for the British military after it had lost so much material during the Dunkirk evacuation in 1940. The Valentine would see extensive action in North Africa, particularly the Mk.II and Mk.IV variants (they had different engines) depicted by this kit. Over 4,500 were also handed over to the Soviet Union under the lend-lease agreement, the Red Army using them mainly for recon work.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Churchill MkVII Crocodile

€33.99

Article number: 300032594 Product: 1:48 Brit.Pz. Churchill Mk.VII Crocodile This is a 1/48 scale plastic assembly kit model of the British Tank Churchill Mk.VII Crocodile. The Churchill design was the result of a chastening experience for British forces in early WWII, a more modern design that could be produced quickly to make up for armor shortfalls after the Dunkirk evacuations. The Mk.VII variant was up-gunned with a 75mm gun and had improved armor up to 152mm thick! The Crocodile is one of the most notable "special" variants of the Churchill. It had an 80-plus meter range flamethrower in place of the front machine gun, towing its fuel and compressed nitrogen propellant in a trailer behind.

Model aircraft kits 1:48

1/48 F-35A Lightning II

€97.99

Article number: 300061124 Product: 1/48 F-35A Lightning II Here is an outstanding entrance into the legendary 1/48 Aircraft Series: this time, the A variant of the Lockheed Martin F-35 Lightning II. The F-35 - variant A for the Air Force, B for the Marines and C for the Navy – was developed under the Joint Strike Fighter Program (JSF), and is seen as one of the fifth generation fighters. These aircraft possess highly advanced stealth characteristics and network connectivity, plus superior situational awareness provided by numerous integrated sensors. The F-35 Lightning II was first delivered in 2015, and deployment of over 3,000 F-35s is planned around the world. Inheriting the Lightning appellation from the famed P-38, the F-35 will lead worldwide air arms for many years to come.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Heavy Tractor SS-100

€25.99

Article number: 300032593 Product: 1/48 Heavy Tractor SS-100 This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing all sorts of subjects including artillery pieces, aircraft, and even V2 rockets, as well as recovering broken down vehicles.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Howitzer MotorCarriage M8

€22.49

  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1/48 Panther Ausf.D

€32.99

Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.

On-road RC cars (2WD/4WD)

1:10 Citroen DS Blue PB MB-01

€174.99

Article number: 300047502 Product: 1:10 RC Citroen DS MB-01 Blau Lack. Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better known cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse (MB-01)

€164.99

Article number: 300058721 Product: 1:10 RC 1000 TCR Berlina Corse (MB-01) Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC 1991 Audi V8 Touring (TT-02)

€154.99

Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC au TOM'S GR Supra (TT-02)

€164.99

Article number: 300058703 Product: 1:10 RC au TOM'S GR Supra (TT-02) Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi 90 quattro Racing TT-02

€169.99

This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX) 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi R8 LMS 2008 Sil PB TT-02

€185.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Audi V8 1992 Touringcar (TT-02)

€159.99

Article number: 300058699 Product: 1:10 RC Audi V8 1992 Tourenwagen (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Warning notices! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC BBX 2WD Buggy BB-01

€339.99

Article number: 300058719 Product: 1:10 RC BBX 2WD Buggy BB-01 Tamiya is proud to announce a brand new 1/10 R/C 2WD off-road buggy model featuring the combination of classic design and modern performance. Its brand new chassis is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by the full-size UTVs. The new body is designed by famed Japanese artist Atsushi Arino. Included: 2WD assembly Kit, BB-01 Chassis, Polycarbonat body with driver, CVA oil dampers, oil filled diff, Monocoque chassis frame, ball bearings WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Blitzer Beetle 2WD

€209.99

Off-road RC cars

1:10 RC Buggy Sand Scorcher 2010 2WD

€394.99

Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Citroen 2CV Charleston (M-05)

€144.99

Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.

RC buggys (2WD/4WD)

1:10 RC Dark Impact 4WD Buggy DF-03

€219.99

Article number: 300058370 Product: 1/10 RC Dark Impact 4WD Buggy DF-03 This 1/10 scale 4WD buggy is specially designed to excel in off-road buggy racing. It features a mid-rear mounted motor and longitundinally mounted battery for optimum balance for jumping. Battery is inserted through the bottom of the chassis, eliminating need to remove body, which makes routine maintenance easy and quick. High performance shaft drive 4WD combines with suspension system featuring extra long suspension arms for improved stability and off-road handling. About the Model - High performance 1/10 4WD buggy chassis designed   for off-road racing - 4-wheel independent double wishbone suspension   features CVA oil dampers and extra long suspension   arms for improved stability and handling - Includes sealed diff gearbox indispensable for off-road running - Features full ball bearings - Electronic Speed Controller (Not Included) - Includes 540 type motor - Newly designed off-road tires and wheels featured larger   diameter and width, and new tread pattern designed for   excellent running and control on hard dirt tracks - Tires: High Density Spike Tires K (4WD/Front, 62/25),   HighDensity Spike Tires K (Rear, 62/35) - Wheels: Large Dish Wheels (4WD/Front, 62/25),   Large Dish Wheels (Rear 62/35) - 2.94 internal gear ratio.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC ENEOS X PRIME GR Supra TT-02

€164.99

Article number: 300047514 Product: 1:10 RC ENEOS X Prime GR Supra TT-02 Here is another 1/10 R/C model assembly kit based on our popular TT-02 chassis. The ENEOS X PRIME GR Supra of ROOKIE Racing with a prominent orange color scheme is one of six GR Supra cars taking part in the Super GT series GT500 class in 2024. The carbon fiber body inspired by the GR Supra street car has aerodynamic devices – which differ for each manufacturer – at the front and rear and on door undersides. Its 2-liter 4-cylinder turbo engine is capable of 550hp and powers the rear wheels. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC F104 PRO II w/Body

€254.99

Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.

On-road RC cars (2WD/4WD)

1:10 RC Fiat 131 Abarth Olio Fiat MF-01X

€184.99

Article number: 300058723 Product: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Fiat Abarth 1000TCR MB-01 paint.

€169.99

Article number: 300047492 Product: 1:10 RC Fiat Abarth 1000TCR MB-01 Lack. Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The body is pre-painted.The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Fighter NXGEN DT-04

€159.99

The DT-04 NXGEN is the consistent further development of the TAMIYA Fighter Buggy models and THE entry-level buggy for young racers! Since 1996, TAMIYA has been setting the standard for entry-level models and the RC car scene with the Fighter Buggies. The DT-04 is based on the tried and tested basis of the DT-03 but has been revised in many places. NXGEN stands for "Next Generation", i.e. the latest generation of Fighter 2WD Buggies. There are many new features in this model, both technically and visually: The look is based on the popular single-seater American racing buggies with 2WD rear-wheel drive. TAMIYA implements this with plastic parts that are already colored white, which makes painting unnecessary. The model can be built in 2 color variants from the kit and the driver figure with helmet makes the Fighter a real eye-catcher! Technically, the NXGEN offers a new 3-part steering, oil pressure shock absorbers, new axle supports, 6-edge wheel mounts at the front and rear, new steering levers and much more! The model can be built in 2 different wheelbases (265mm or 280mm). This is done simply by turning the front lower wishbones and converting the steering. A short wheelbase makes the model more agile on the racetrack and the long wheelbase enables a smoother ride. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Driver Figure (Tamiya X, XF, LP) 2WD assembly kit, DT-04 Chassis, ESC included, Type 540 Torque- Tuned Motor, ABS-Body, user guide   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Escort Custom (TT-02)

€154.99

Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Ford Escort MkII Rally PB MF-01X

€199.99

Article number: 300058687 Product: 1:10 RC Ford Escort MkII Rally PB MF-01X Rally cars are always an exciting subject, accomplished both on asphalt and flat dirt, and Tamiya is delighted to announce the addition of another to our R/C stable: the Ford Escort Mk.II Rally, depicting a car which was RAC Rally champion from 1975-1979. Fittingly, it is based upon the MF-01X chassis, which has dedicated rally parts and is at home on a range of surfaces. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L). • The classic Escort Mk.II form is breathtakingly recreated in polycarbonate, and pre-painted in White. Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps. • Polycarbonate front and rear light cases are compatible with separately sold 5mm LEDs. • Stickers are included to recreate blue livery sections, sponsor logos and more. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.

Off-road RC cars

1:10 RC Ford F-350 HighLift 4x4 3-Speed

€559.99

Article number: 300058372 Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford Focus RS Custom TT-02 paint

€154.99

Article number: 300047495 Product: 1:10 RC Ford Focus RS Custom TT-02 Lack. Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Ford GT Mk.II 2020 (TT-02) PB

€159.99

Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Off-road RC cars

1:10 RC Golf MK2 GTI 16 Rally MF-01X

€184.99

Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Honda NSX Racing Whi PB TT-02

€174.99

Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat Body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Hornet EVO.

€209.99

Article number: 300058742 Product: 1:10 RC Hornet EVO. This year is the 40th anniversary of the original Hornet’s release. To commemorate this anniversary, we are releasing a new version of the Hornet: 1/10 R/C Hornet EVO. You can see the differences between Items 58336 and this model (58742) in the suspension, rear gearbox, bearing and dampers. 2WD assembly kit, ESC included, Type 540 Motor, clear Polycarbonat-body, Ball bearings, CVA Damper, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 RC Hotshot II Blockhead Motors

€269.99

Article number: 300058710 Product: 1:10 RC Hotshot II Blockhead Motors Tamiya welcomes back Item 58062 1/10 R/C Hotshot II - originally released in 1987 - with a twist! The Hotshot II is one of the earliest 4WD buggy models and this had not been re-released until today. Following Item 58695 (1/10 R/C Wild One Off-Roader Blockhead Motors), this is the second model of our Jun Watanabe R/C buggy re-releases. This model is the 4WD buggy based on Item 58062, and the sticker is designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS'' which deals in stickers and apparel, and customizations of Tamiya off road buggy models from the 1980s, also taking part in the design of collaborative fashion, music, and skateboard projects to expand the horizons of R/C cars. Included: 4WD Kit, Blockhead Design, 540er Motor, Electric ESC, pre-painted Body, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Impreza Mexico '04 (TT-01E)

€144.99

Article number: 300047372 Product: 1:10 RC Impreza Mexico '04 (TT-01E) This is a re-issue for the classic Subaru rally body and TT-01 Type-E chassis combination, last produced in 2018! The WRC 2004 rally season saw major rule changes governing aspects such as body design, engine, suspension and more; Subaru would narrowly miss out on the Drivers’ Championship, with star driver Petter Solberg finishing in second to Sébastien Loeb. In the Rally Mexico, third race of the calendar, Solberg set fastest times on 9 of 15 stages but a 5’40" penalty would push him back to an eventual 4th place finish. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 441mm, width: 185mm. • The Impreza from the 2004 Rally Mexico is expertly depicted in durable polycarbonate, with separate molded mirror and wing parts. • Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc. • Dish wheels are molded in gold, and paired with tread pattern racing radial tires. • The TT-01 Type-E chassis features a shaft-driven 4WD system to offer easy handling and great customizability. • A wide range of Hop-Up Options is available to tune the TT-01 Type-E chassis. • Click here to see the item on the official Tamiya homepage.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Lancia 037 Rally (TA02-S)

€234.99

Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.

On-road RC cars (2WD/4WD)

1:10 RC Lancia Delta HF Integrale TT-02

€169.99

Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC LandRover Defender 90 CC-02

€294.99

Article number: 300058700 Product: 1:10 RC LandRover Defender 90 CC-02 Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC M-07 Concept Chassis Kit

€194.99

Article number: 300058647 Product: 1:10 RC M-07 Concept Chassis Kit This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers responsive drive characteristics and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets. • 1/10 scale R/C chassis assembly kit. Length: 332mm, width: 164mm. • The core of the chassis is a 1-piece monocoque with integrated upper frame elements similar to the TA-07 Pro. It is designed to offer excellent rigidity with easy maintenance. • Choose between 2 different wheelbases (M: 225mm, L: 239mm), simply by changing rear arm attachment direction. • Newly designed front and rear suspension use long arms for ideal leverage ratio, in tandem with long steering linkage components. Rear toe can be adjusted simply using spacers. • 4-wheel double wishbone suspension is fitted with CVA oil shocks. • The TA06 oil-filled gear differential is used to drive the M-07. It is paired with universal drive shafts and full ball bearings. • Compatible with standard IFMAR (Li-Po cell-type) regulation square-shaped battery packs. • Compatible with Low-Profile servos. • The chassis was designed with easy access to the stabilizers (sold separately) for quick, precise adjustments vital at the racetrack. • Body mounts have a new reinforced design for more secure body attachment. • The chassis gives its driver excellent "feedback," allowing you to judge with clarity how your setup changes have impact. Scope of delivery: Kit for M-07 chassis, instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC M-08R Chassis Kit

€319.99

Article number: 300047480 Product: 1:10 RC M-08R Chassis Kit Our popular M-chassis series welcomes a new addition – this time, the M-08R Chassis Kit. This chassis employs various kinds of option parts such as ball differentials and CVA oil dampers to get ready for races. The TRF/Hop-Up Option parts below are also included. • 42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue) • 42357: Cross Joints for Low Friction Assembly Universal Shafts • 51000: Hi-Torque Servo Saver (Black) • 53509: Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T/F201) • 53642: 5mm Aluminum Ball Connector (Blue) • 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) • 53851: 46mm Titanium Coated Suspension Shafts 2pcs. • 53917: φ 2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension • 53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.) • 54183: M-Chassis Reinforced Freewheel Axle Set • 54868: Open Face 5mm Reinforced Adjusters (Medium/8pcs.) • 54869: Open Face 5mm Reinforced Adjusters (Long/8pcs.) • 54906: M-08 Concept Aluminum Shaft Set • 54969: 33mm Lightweight Aluminum Swing Shafts (2pcs.) Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC MB 190E debis Zakspeed TT-01E

€159.99

Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC MB CLK AMG 2002 TT-02

€154.99

Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Mercedes-AMG GT3 (TT-02)

€159.99

Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mercedes-AMG GT3 EVO TT-02

€179.99

Tamiya welcomes another racing car – this time, the Mercedes-AMG GT3 EVO – paired with our popular TT-02 chassis. The Mercedes-AMG GT3 EVO was developed for GT3 races in 2020. Using the previous model as a base, a 6.3-liter V8 engine capable of 550hp is employed and aerodynamics are improved across the board. It has an automatic data logging system for racing analysis, and the engine automatically starts once the car is drop started from its air jacks. Also providing top level safety, this car has been used by racing teams around the world. Required accessories (not included): RC System with Receiver, Servo, 7.2V NiMH Battery Pack, Charger, Tamiya PS-Paints 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Mitsubishi Lancer Evo V (TT-02)

€154.99

Article number: 300058713 Product: 1:10 RC Mitsubishi Lancer Evo V (TT-02) Tamiya is proud to announce the release of the Mitsubishi Lancer Evolution V as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The Mitsubishi Lancer Evolution 5th generation model took part in global rally races in 1998 and achieved both Maker’s and Driver’s Championships. This car featured a powerful body with bulging fenders, louvers and air intakes on the hood, and rear wing. This kit depicts it as a road car. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Monster Beetle (2015)

€234.99

Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure. Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Motul Autech Z 2023 TT-02

€159.99

Article number: 300058735 Product: 1:10 RC Motul Autech Z 2023 TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is very different, with a carbon fiber body and a front 550hp-plus 2-liter 4-cylinder single turbo engine. It got off to a great start, winning the opening race of 2023 in Okayama. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Nissan Skyline GT-R R33 (TT-02D)

€194.99

Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D) Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes. About the Model • This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Opel Kadett GT/E Ral.MB-01 paint

€179.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Peugeot 306 Maxi BT-01

€184.99

Here is another R/C kit paired with the 2WD BT-01 chassis which offers choices of FF/MR/FR drive system; this time, a standard wheelbase, front motor / front wheel drive (FF) setup with the body which recreates the Peugeot 306 Maxi. Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally-aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally in Monte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Peugeot 306 Maxi PB BT-01

€189.99

Here is another R/C kit paired with the 2WD BT-01 chassis which offers choices of FF/MR/FR drive system; this time, a standard wheelbase, front motor / front wheel drive (FF) setup with the body which recreates the Peugeot 306 Maxi. Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally-aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally inMonte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions. The polycarbonate body pre-painted in Brilliant Blue (PS-30) with Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD kit model, BT-01 chassis, electronic speed controller, 540 torque-tuned motor, pre-painted polycarbonate.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche 911 GT3R (992) PBTT-02

€194.99

Tamiya is proud to announce the release of the Porsche 911 GT3 R (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. Based upon the Porsche 911 GT3 (released as our 1/10 R/C kits – Items 58712 and 47496), in July 2022, the Porsche 911 GT3 R (992) was announced as a car which was developed to conform to GT3 regulations. With a horizontally opposed 6-cylinder engine capable of 565ps, this car features lightweight body (only about 1,250kg) with carbon fiber, and flourished at global races such as NLS (Nürburgring Langstrecken Serie) 2024 and 2024 Fanatec GT World Challenge Asia Powered by AWS. The polycarbonate body is pre-painted in Black (PS-5) and Gun Metal (PS23) with Smoke (PS-31) windows and black wing and light cases, with precut wheel arches and pre-made body mount holes. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger 4WD kit model, TT-02 chassis, electronic speed controller, 540 torque-tuned motor, pre-painted polycarbonate body with attachments, instructions   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Porsche Carrera RSR 2.8 BT-01

€194.99

Article number: 300058740 Product: 1:10 RC Porsche Carrera RSR 2.8 BT-01 The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC RAYBRIG NSX Concept-GT (TT-02)

€159.99

Article number: 300058599 Product: 1/10 RC RAYBRIG NSX Concept-GT (TT-02) The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends. • The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Renault Alpine A110 Jaeger M-06

€164.99

Article number: 300058708 Product: 1:10 RC Renault Alpine A110 Jaeger M-06 Tamiya is proud to add a new version of the Alpine A110 with an orange Jägermeister livery to our M-06 chassis series. The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first World Rally champion and its Jägermeister orange livery version achieved a class victory in German circuit races. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC Skyline GT-R (R32) (TT-02D)

€234.99

Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Squash Van 4WD GF-02

€199.99

Article number: 300058725 Product: 1:10 RC Squash Van 4WD GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, ESC included, Type 540 Motor, Clear polycarbonate Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Subaru WRX STI 24hr Nrbg TT-02

€159.99

Article number: 300058645 Product: 1:10 RC Subaru WRX STI 24hr Nrbg TT-02 This model will recreate the Subaru WRX STI car which took an impressive victory in the SP3T class of the Nürburgring 24 Hours race at the legendary German circuit in May 2016. The car is powered by the same engine as in its production model - the EJ20 2-liter horizontally-opposed turbo engine.

RC buggys (2WD/4WD)

1:10 RC Super Avante (TD4) 4WD

€349.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC T/GR Yaris Rally1 Hybrid TT-02

€159.99

Article number: 300058716 Product: 1:10 RC T/GR Yaris Rally1 Hybrid TT-02 Here comes an additional 1/10 R/C model assembly kit based on our popular TT-02 chassis – this time, Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. To comply with the Rally1 restriction which started in 2022, manufacturers developed new cars compatible with hybrid system, and Toyota made the GR Yaris Rally1 Hybrid. The combination of hybrid unit integrated with motor and generator and engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

On-road RC cars (2WD/4WD)

1:10 RC TA08 PRO Chassis Kit

€349.99

Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

RC buggys (2WD/4WD)

1:10 RC The Frog 2005 2WD Buggy Re.Re

€184.99

  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC Toyo. Celica GT-Four TT-02 paint

€154.99

Article number: 300047500 Product: 1:10 RC Toyo. Celica GT-Four TT-02 paint Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 RC Toyota 4x4 Pick Up Bruiser 2012

€819.99

Article number: 300058519 Product: 1:10 RC Toyota 4x4 Pick Up Bruiser 2012 This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism. Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance. About the Toyota Hilux Pick-Up　 The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day. Necessary accessories: - 4-channel R/C unit with ESC　 - Battery Pack & Charger - Batteries for transmitter Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.