Plastic model kits
Conquer the skies, cross the oceans and race the streets with our versatile plastic model making range! Whether it's model cars, motorbikes, military vehicles, aeroplanes or ships, you'll find everything you need to live out your passion for model making to the full. Click here to find out more.
Model aircraft kits 1:32
1:32 Mc Donnell DOUGLAS F-15 EAGL
300060304€124.99
Art.Nr.: 300060304 Product: 1:32 Mc Donnell DOUGLAS F-15 EAGL About the McDonnell Douglas F-15C Eagle At one time during the missile boom years, the U.S. Air Force believed future air battles could be decided by air-to-air missiles rather than guns in the traditional dog-fighting manner. The need for air superiority weapons was relearned during the Vietnam Conflict and led to an Air Force requirement for an all-weather, single-seat, twin-engined fighter. This aircraft was to optimize counter-air operations. The U.S. Air Force requested several manufacturers to study and develop prototypes during the late 1960's under the FX program (Fighter Experimental). McDonnell Douglas was awarded a contract to develop the F-15 Eagle jet fighter in December 1969. The Eagle's advanced aerodynamic design greatly reduced drag at both the low and high lift configurations, and achieved superior maneuverability during varying flight conditions. Making its maiden flight in July 1972, it was deployed in November 1974 as the F-15A Eagle, and had been in active service since then. It is powered by two Pratt & Whitney F100 afterburning turbofan engines developed exclusively for the for the F-15, and is capable of speeds in the Mach 2.5 range. The F-15 can carry a heavy load of devastating weapons, including the internally mounted 20mm M61A-1 Vulcan cannon, with 940 rounds of ammo, the AIM-7 Sparrow radar guided missile and AIM9 Sidewinder short range air-to-air missile. In 1979 an upgraded version of the Eagle was introduced as the F-15C. One notable change was the increase in fuel capacity, but even more fuel was made possible by the conformal fuel tanks, which snuggle between the wings and up against the jet inlet ramps. This increase in fuel capacity enables the Eagle to expand long range operations, such as escorting AWACS and strike aircraft to their targets. The Landing gear has been reinforced to accept the extra fuel weight, allowing a maximum take-off weight of 68,000 lbs (30844 kg). The F100 Pratt & Whitney engines were also upgraded for easier maintenance and increased performance. The F-15C's maximum rate of climb at sea level is more than 50,000ft (15,240m) per minute. As the Premier jet fighter the Eagle continuously receives improvements to keep pace with the changing state of the art. The multi-stage improvement program (MSIP) is organized to enhance the avionics, like the internal ECM system and computer capacity. The APG-63, provides excellent long range navigation and tracking for the Eagles' fighter interdiction role. Owning to its versatility, adaptability and ruggedness, the F-15 Eagle will certainly continue to play its role of an air superiority fighter well into the 21st century. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Mc Donnell Douglas F-4J Phantom II
300060306€129.99
Article number: 300060306 Product: 1:32 Mc Donnell Douglas F-4J Phantom II Originally accepted for Navy service in 1958, the F-4 Phantom II went on to protect the skies of numerous Western nations. This kit depicts the F-4J variant which served with distinction with the Navy during the Vietnam War and was responsible for many victories over North Korean MiGs. The major assemblies are attached with screws and the one-piece fuselage and die-cast metal landing gear legs ensure superb strength. The canopy and air brake may be assembled in either open or closed positions as well. To top it off, an array of ordnance including Sparrow and Sidewinder missiles, two crew figures, and three marking options are also included. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Mc Donnell F4 C/D PHANTOM II
300060305€124.99
Article number: 300060305 Product: 1:32 Mc Donnell F4 C/D PHANTOM II The F-4 Phantom II was originally conceived as a carrier-borne fighter for the Navy in the late 1950s but was eventually also adapted by the Air Force and Marines in addition to the air forces of many other countries. This model kit can depict the first variant used by the Air Force, the F-4C, as well the subsequently upgraded F-4D. The kit features a one-piece fuselage for easy assembly and die-cast metal landing gear legs to ensure a stable stance after the kit is finished. The canopy and airbrake may be assembled in either open or closed positions. A wide range of ordnance, two crew figures, and three marking options are also included. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 North American P-51D Mustang
300060322€134.99
Article number: 300060322 Product: 1:32 North American P-51D Mustang The P-51 Mustang is considered by many to be the best fighter aircraft of WWII. The P-51 Mustang came about when the British Purchasing Commission asked North American Aviation to produce the Curtiss P-40 for the RAF, but North American stated they could build something better. The P-51D is considered by many experts to be the definitive variant of the Mustang as it was the most widely produced. It featured a bubble canopy which gave the pilot superb all-round visibility as well as a heavier armament of six 12.7mm machine guns. Wing racks allowed the carriage of drop tanks to extend range or bombs for ground attack. P-51Ds were instrumental in helping the Allies gain air superiority over Europe, and after Germany's defeat, they continued their role as long-range escorts for B-29s attacking Japan. Many also saw service during the Korean War as fighter-bombers and a few even continued to serve with air forces of less developed nations until the 1980s. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Supermarine Spitfire Mk.VIII
300060320€154.99
Article number: 300060320 Product: 1:32 Supermarine Spitfire Mk.VIII The True Successor to the Mk.V The legendary Spitfire was the representative British fighter of WWII. Many variants were built and among these was the Mk.VIII, a variant developed to be the replacement for the RAF's previous mainstay Spitfire, the Mk.V. The Mk.VIII was fitted with a Rolls-Royce Merlin 60-series engine, larger radiators, and an air filter as standard. Other improvements included fuel tanks added in the wings, retractable tail wheel, shortened ailerons, and enlarged rudder and elevators. From the latter half of 1943, the Mk.VIII were deployed to the Mediterranean and Pacific Theaters and saw service with RAF, USAAF, RCAF, and RAAF units. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.VIII. ★Overall Length: 302mm, Overall Width: 383mm. ★Features of the Mk.VIII, including the retractable tail wheel, shortened ailerons, and wing fuel tanks, have all been accurately reproduced. ★You can select either retracted or deployed landing gear and tail wheel even after assembly. ★Parts to depict standard and extended wingtips included ★Features moveable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★Parts for 30 and 90 gallon fuel tanks included. ★Comes with 3 kinds of markings to depict the aircraft from USAAF, RAAF, and RCAF units. ★Comes with 2 pilot figures, 1 seated and 1 standing.
Model aircraft kits 1:32
1:32 Supermarine Spitfire Mk.XVIe
300060321€149.99
Article number: 300060321 Product: 1:32 Supermarine Spitfire Mk.XVIe A Case of a Good Bubble The legendary Supermarine Spitfire is often credited with saving England during WWII. Among its many variants was the Mk.XVI, which was a Mk.IX airframe that was powered by a Merlin 266 engine license-built by Packard Motor Car Company in the United States. Most Mk.XVIs featured the larger rudder and E Type wing with two 20mm cannons and two 12.7mm machine guns. With the introduction of the teardrop canopy, the rear upper fuel tank capacity was reduced to 33 gal. and that of the forward lower fuel tank was increased to 48 gal. to compensate. 1,054 Mk.XVIs were produced from September 1944 until July 1945. During the war, they were deployed on the European front and served as fighter-bombers. In the post-war period, the Mk.XVI was used by the RAF as well as the Belgian and Greek air forces until the early-1950s. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.XVIe. ★Overall Length: 302mm, Overall Width: 311mm. ★Distinctive features of the Mk.XVIe, including Packard Merlin 266 engine, E Type wing, teardrop canopy, and modified landing gear legs, are accurately reproduced. ★Canopy may be opened even after assembly. ★Features movable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★30 gallon drop tank, two 250lb bombs, and 3 types of markings included. ★Comes with 3 kinds of markings to depict the aircraft from Royal Air Force squadrons as well as the (Pilots) Refresher Flying Unit. ★2 pilot figures, 1 seated and 1 standing, are included. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 US VOUGHT F4U-1A Corsair
300060325€154.99
Article number: 300060325 Product: 1:32 US VOUGHT F4U-1A Corsair This is a highly detailed model recreating the F4U-1A variant of the highly popular Corsair model. Newly-designed parts are included in the kit to accurately capture the modifications which distinguish it from the original F4U-1. The F4U-1A drew on the experience of Navy and US Marine Corps pilots' experience with the original aircraft, making modifications to further improve the performance of this legendary bird. One of the most noticeable alterations was the discarding of the "birdcage" cockpit and its extensive frame sections that hampered visibility; a semi-bubble canopy with minimal frame was installed instead, which improved the pilot's view and made it easier to land the F4U-1A. Additional upgrades included raising the pilot's seat 18cm to help with visibility, and later extending tail wheel struts by 16.5cm. A wedge shaped spoiler was added to the starboard wing to correct the tendency of the port wing to stall first and roll out of control. Such modifications contributed greatly to the F4U-1A's suitability for use from aircraft carriers; although by this time it had been passed over for that duty by the F6F Hellcat. Unlike its predecessor, the F4U-1A would later be used as fighter-bomber, and was given the capability of carrying a drop tank under the fuselage, plus a bomb rack for use on raids supporting ground troops. This combination of fearsome performance in the air and bombing capability made the F4U-1A a vital component as the Allied forces conducted their 'island hopping' strategy progressing through the Solomon Islands. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Alum. Gun Barrel Jagdpanzer IV/70 L
300012660€17.79
Article number: 300012660 Product: 1/35 Alum. Gun Barrel Jagdpanzer IV/70 L This detail-up part set is available to add a higher level of realism to Item 35340 1/35 German Jagdpanzer IV /70(V) Lang. The high-precision metal parts in this set recreate barrel and breech parts of the Lang's impressive 70-caliber 7.5cm main gun. •Precise recreation of the 7.5cm gun barrel in aluminum gives a sharp finish, and eliminates the need for removal of parting lines which arises when using resin plastic parts. •Features separate metal parts recreating gun breech, operating wheel, equilibrators and more. •Equilibrators are moving parts with built in poly caps. They allow elevation and depression of the gun barrel. •For use with Item 35340 1/35 German Jagdpanzer IV /70(V) Lang.
Military figures & Accessories 1:35
1:35 Alum. Metal Barrel JGSDF Type 16
300012686€20.49
Article number: 300012686 Product: 1:35 Alum. Metal Barrel JGSDF Type 16 This is a precision metal gun barrel for the Japan Ground Self Defense Force Type 16 MCV model kit. It adds greater realism compared to the standard plastic part found in the model. Kit model, scale 1:35, Aluminum gun barrel, instructions, suitable to 300035361.
Military model vehicles 1:35
1:35 Brit. BT. Matilda Mk.III/IV(3)
300035300€52.99
Article number: 300035300 Product: 1:35 Brit. BT. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296). Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. M10 IIC Achilles
300035366€49.99
Article number: 300035366 Product: 1/35 M10 IIC Achilles Here is the British Achilles tank destroyer, which appears in Tamiya 1/35 scale for the first time! The Achilles was a modification of the M10s which Britain received from the U.S., with the original 3-inch main gun replaced by the fearsome British 17 pounder. The vast majority of M10s were the M10 IIC variant, which was based upon the late-production M10 with distinctive enlarged turret-rear counterweight. Around 1,000 were produced between Spring 1944 and the end of WWII, the Allied forces making good use of it after the Normandy landings, benefiting from the power of the gun which allowed it to tear through Tiger I front armor. About the Model - This is a 1/35 scale plastic model assembly kit. - In-depth study of the real thing has enabled this highly accurate scale depiction of the Achilles. - Features newly-molded parts depicting the upper hull with its sloped armor, late production M10 turret counterweight, and long 17pdr gun. - Interior features excellent detail, including depictions of shell racks and multi-part 17pdr gun breech. - Comes with 3 full body figures – gunner and loader seated in the fighting compartment, and commander seated on the turret edge – plus a driver torso figure. All are brand new! - Lower hull, suspension, wheel and track parts are carried over from the acclaimed Tamiya 1/35 model of the M10 that served as the Achilles’ base. - New sprocket wheel parts depict late M10 components. - 2 planned marking options depict 93rd Anti-Tank Regiment (Italy, 1944) and 75th Anti-Tank Regiment (NW Europe) vehicles.
Military model vehicles 1:35
1:35 Brit. MBT Challenger 1 Mk.III (2)
300035154€44.99
Article number: 300035154 Product: 1:35 Brit. MBT Challenger 1 Mk.III (2) British forces in the 1991 Persian Gulf War were able to rely on a significant asset in the Challenger 1, its awe-inspiring 120mm main gun accounting for numerous Iraqi T-72 tanks, and the crew protected ably by front and side composite and reactive armor. This kit can be assembled to recreate a Challenger 1 used by British forces, or also NATO troops. Nylon mesh is included to recreate the baskets encircling the turret. Two highly realistic figures are included; one depicts a bescarfed commander in desert conditions, while the other captures a commander in the distinctive NATO cold-climate uniform. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Univer. Carrier Mk.II (5)
300035175€21.49
Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Univers. Carr. Mk.II (3)
300035249€23.99
Article number: 300035249 Product: 1:35 Brit. Univers. Carr. Mk.II (3) During WWII, the British army used various small tracked personnel carriers such as the Universal Carrier Mk.II, which first appeared in 1942. Tamiya's plastic assembly model kit accurately reproduces this vehicle's compact design, suspension, and equipment. Included in the set are three figures to depict a driver, gunner, and radio operator as well as an additional two figures in North African front uniforms. Four kinds of decals are also included to allow you to depict the Universal Carrier Mk.II in a wide variety of battlefield settings including North Africa, Italy, and France. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit.Tank Cromwell Mk.IV Cruis.(1)
300035221€43.99
Article number: 300035221 Product: 1:35 Brit.Tank Cromwell Mk.IV Cruis.(1) This is a plastic assembly model kit of the Cromwell Mk.IV Cruiser tank, which served alongside the Churchill infantry tank after the Normandy landings in June, 1944. The distinctive riveted armor and turret have been precisely reproduced. The large road wheels, which allowed the Cromwell to move quickly on the battlefield, have also been accurately rendered. Parts are included to depict features which were unique to Normandy: "Normandy cowl" ducts which prevented the exhaust gases from entering the tank and hedgerow cutters, which were attached to the front of the tank to allow it to move through the thick brush. Five kinds of decals and a tank crewman figure are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 British Light Utility Car 10HP
300035308€35.49
Article number: 300035308 Product: 1:35 WWII British Light Utility Car 10HP British forces used passenger car chassis, during WWII, as the basis for pick-up style military vehicles. Officially identified as a "Light Utility Car" soldiers called them affectionately by the nickname "Tilly". The vehicle was equipped with a 30hp engine and rear wheel-drive. However, the car did not have sufficient off-road abilities and was soon replaced by 4WD vehicles. As a result, the "Tilly" was used in airbases for liaisons and in other paved areas. The vehicle served in the Dunkirk evacuation, North African and Italian fronts, and Europe from the Normandy invasion on. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Field Kitchen (4)
300035247€19.49
Article number: 300035247 Product: 1:35 Diorama-Set Field Kitchen (4) This is a plastic model assembly kit of a field kitchen widely used by the German army during WWII. The typical German field kitchen consisted of a large-sized cooking pot and a coffee heater and was connected to a limber which carried cooking materials, various kinds of containers, and emergency rations; the whole package has been realistically reproduced. The limber and trailer can be attached after assembly. Two each of soldier and cook figures are included with the set. A rich assortment of accessories such as milk cartons, bread, cheese, apples etc provide the model with a realistic finish. Four figures included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Ger.Barrel & Jerry Can
300035186€8.69
Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Motorcycle Orderly (2)
300035241€12.99
Article number: 300035241 Product: 1:35 Diorama-Set Motorcycle Orderly (2) During WWII, the German army adopted the use of the DKW NZ350 medium sized motorcycle; it is included with this set along with a sign post and a military police officer figure who is giving directions to the rider figure with an opened map. Parts of the NZ350 including the suspension and engine area as well as separate parts to depict the side bags and exhaust are finished with rich detail. Both figures feature natural poses and realistic expressions. The road signs seen on the post from Normandy, France are printed on the box and can be easily cut out and used when recreating your diorama. Two figures included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Soilder w/ Bicycle (2)
300035240€12.99
Article number: 300035240 Product: 1:35 Diorama-Set Soilder w/ Bicycle (2) This is a plastic assembly model kit which includes two German soldiers on bicycles. Separate parts to depict the bicycles' handles and pedals as well as detailed wheel spokes and seats provide the models with added realism. You can choose to assemble the soldier figures in either a standing or cycling pose. Display your models on their own or even as a part of a larger diorama.
Military figures & Accessories 1:35
1:35 Diorama-Set US Infantry-Weapons
300035121€6.49
Article number: 300035121 Product: 1:35 Diorama-Set US Infantry-Weapons This is a 1/35 scale plastic model assembly kit depicting typical WWII U.S. weaponry. ★A comprehensive set includes various pistols, the M1 rifle, M2 carbine, Thompson submachine gun, M2 heavy machine gun, M2 mortar, bazookas, M18 recoilless rifle and various other subjects. ★Also comes with accessories such as ammo cases, rounds, gas marsks and more. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set Brit. Infant. Patrol. (5)
300035223€11.99
Article number: 300035223 Product: 1:35 Fig-Set Brit. Infant. Patrol. (5) This is a 1/35 scale set of five British infantrymen which includes a squad leader, an ammunition loader, and riflemen who are cautiously carrying out a patrol. Set includes each squad member depicted in natural poses with realistic expressions. Accessories such as the Sten sub machine gun, Bren light machine gun, Enfield rifles, haverasacks, and back packs all have a fine finish. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set Ger. Tank Crew Rest(6)
300035201€10.99
Article number: 300035201 Product: 1:35 Fig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.
Military figures & Accessories 1:35
1:35 Fig-Set US Infantry Assault (6)
300035192€11.79
Article number: 300035192 Product: 1:35 Fig-Set US Infantry Assault (6) This plastic assembly model set features six (two noncommissioned officers & four infantrymen) U.S. WWII soldiers in a variety of dynamic in-battle poses. ★These figures are depicted wearing authentic M1941 and M1943 field jackets and canvas leggings. ★The tense situation of battle can be clearly seen through the expressions of the models such as the noncommissioned officers giving instructions to their men who are waiting for the order to attack. ★Weapons such as the M1 Garand rifles and Thompson submachine gun have a sharp realistic finish. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Floating Car (4)
300035253€11.29
Article number: 300035253 Product: 1:35 Fig.-Set Floating Car (4) This is a 1/35 scale plastic assembly kit of WWII German tank crew figures which is perfect for displaying with German vehicles such as the Kübelwagen and Schwimmwagen. The set contains 4 figures in realistic pose, including a field commander sitting on the door, a seated driver, a grenadier leader pointing forward, and a tank commander wearing a leather jacket. In addition, the package side features a road sign illustration from the Ardennes front which can be used in the creation of dioramas. Set includes four figures. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set US Gun/Mortar Tro.(8)
300135086€6.59
Article number: 300135086 Product: 1:35 Fig.-Set US Gun/Mortar Tro.(8) This is a 1/35 scale plastic model assembly kit depicting a WWII U.S. gun and mortar team. ★The set features no fewer than eight figures in highly authentic action pose. ★Detailed depictions of radio equipment, ammo cases and more make for a convincing final product. U.S. Gun and Mortar Team
Military figures & Accessories 1:35
1:35 Fig.-Set US Infant. W-Europe (8)
300035048€7.19
Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Fren. Tank R35
300035373€31.49
Article number: 300035373 Product: 1:35 Fren. Tank R35 Length: 114mm. A Doughty Light Tank By the 1930s French military planners could no longer ignore the obsolescence of their masterpiece FT17 tank from late WWI, and work started on a genuine successor to fill the void. One of the answers they came up with was the R35 light tank, which utilized rolled steel lower and three-piece cast upper hull designs and was armed with the short barreled 37mm gun. It was crewed by two. When hostilities with Nazi Germany burst into life in May 1940 the R35 was right in the front line. While it showed its armor was reliable, the 37mm gun was inadequate when it came to taking out German armor. The Fall of France in June 1940 meant that production of the R35 was curtailed to approximately 1,600 units. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 114mm, width: 55mm. ★The R35 form with distinctive rounded hull and complex turret is accurately depicted. ★Turret utilizes slide molding for superior authenticity and a fulfiling build. ★Realistic gun elevation and traverse ranges add to the realism. ★Assembly type tracks feature one-piece straight sections for realistic depiction of upper run 'sag.' ★A single commander figure is included for installation upon the turret rear hatch. ★Comes with two early WWII marking options.
Military model vehicles 1:35
1:35 French MBT B1 bis (1)
300035282€82.99
Article number: 300035282 Product: 1:35 WWII French MBT B1 bis (1) Defender of the Republic In May 1940, B1 bis tanks stood in the way of German armies determined to strike a crushing against France on her own soil. Introduced as an upgraded version of the original Char B1, which was developed in the nineteen twenties, the B1 bis entered production in 1937. The rivet-joined hull mounted a short-barreled 75mm howitzer, while a small, one-man turret carried a longer-barreled 47mm tank gun. The B1 bis was one of the most heavily armored tanks of its time, with plating that was 60mm thick in places, more than capable of defending against anti-tank fire such as that from 37mm Pak guns. The B1 bis could more than hold its own against individual German tanks, and was greatly feared by enemy soldiers who encountered it. About the Model ★1/35 scale assembly model of the French B1 bis ★Realistically depicts tank's tall profile, 75mm gun and side armor panels covering suspension mechanisms. ★Hull parts are made using slide molding and feature accurately depicted hex bolts. ★Newly-designed track parts require no cement to assemble and snap together easily by hand. ★Commander's and driver's periscopes are moveable, as is the 75mm main gun. ★Choice of two types of fenders and exhausts, combined with 4 sets of markings allows construction of each possible combination. ★Includes realistic metal tow-chain, and 1 tank commander figure. ★Comes with colorful painting guide and four types of marking decals. ★Reverse side of painting guide features an exciting article about the exploits of B1 bis tanks facing German Panzers Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 French Med. Tank SOMUA S35
300035344€55.99
Article number: 300035344 Product: 1:35 French Med. Tank SOMUA S35 The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Length 153 mm.
Military model vehicles 1:35
1:35 Ger. Battle Tank IV F L24/75mm
300035374€53.99
Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).
Military model vehicles 1:35
1:35 Ger. Jagdpanzer IV/70 (V) Lang
300035340€59.99
Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Kübelwagen T82 Africa (1)
300035238€19.49
Article number: 300035238 Product: 1:35 Ger. Kübelwagen T82 Africa (1) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. The car's interior and under chassis area including the suspension arms and engine guard are realistically reproduced. A standing soldier figure wearing shorts and a short sleeved shirt included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Marder III M Normandy
300035364€48.99
Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.
Military model vehicles 1:35
1:35 Ger. PzKpfw. II Ausf. A/B/C (1)
300035292€47.99
Article number: 300035292 Product: 1:35 Ger. PzKpfw. II Ausf. A/B/C (1) After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II tanks were manufactured. They led the surprise invasion on Poland and were the main tanks used in the attack on France. Later, they were successfully used in reconnaissance missions until the end of the war. About the Model •1/35 model of the German Panzerkampfwagen II tank. •Supplemental armor plate parts can be installed in the same manner as the actual tank. •Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants. •Assembly-type tracks feature single-piece sections for effortless construction. •Comes with a commander figure and three kinds of markings for the French campaign. •Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. PzKpfw. III Ausf. L (1)
300035215€43.99
Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.139 Tank De.MarderIII(2)
300035248€45.99
Article number: 300035248 Product: 1:35 Ger. SdKfz.139 Tank De.MarderIII(2) About the Model ★1/35 scale plastic assembly model kit based on the German Tank Destroyer Marder III. ★Overall length: 174mm ★Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction. ★All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated. ★Protective armor and sighting equipment moves with raising and lowering of main gun. ★Crew seats and large clamp for main gun can be modeled in the fighting or moving positions. ★Two crew figures are included in set. Five kinds of battlefield markings are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2)
300035197€43.99
Article number: 300035197 Product: 1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2) During WWII, the German army used self-propelled guns in large quantities with one such gun being the German Sturmgeschutz III. This plastic assembly model kit realistically reproduces the form of the Ausf.G early version which was manufactured from December 1942. The distinctive low silhouette of the StuG III, with the fighting compartment mounted onto the Panzer III's hull, features great scale realism. The kit also includes parts to allow you to depict the StuG III with either a 7.5cm anti-tank howitzer or the 10.5cm gun used to support the infantry units. Parts to depict Schürzen armor as well as two figures in relaxed pose feeding and holding a puppy are also included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)
300035087€23.99
Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1)
300035170€43.99
Article number: 300035170 Product: 1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1) This is a 1/35 scale plastic assembly kit of the Panther tank, which was deployed from 1943 in order to counter the formidable Russian T-34. The kit depicts a Panther Ausf.G, a variant produced from March 1944 which followed the earlier Ausf.D and Ausf.A. The long-barreled 75mm gun has been accurately reproduced and the escape hatch at the rear of the turret may be opened to view the gun breech even after completion. Other hatches on the model may be assembled in either open or closed positions. One tank crew figure and four markings options are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)
300035194€45.99
Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Königstiger Por-T(1)
300035169€47.99
Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Pz VI Kingtiger (1)
300035164€48.99
Article number: 300035164 Product: 1:35 Ger. SdKfz.182 Pz VI Kingtiger (1) With 150mm of frontal armor and 80mm on its sides, the King Tiger was far from a welcome sight for hostile troops; this was rather exacerbated by the awe-inspiring L/71 88mm main gun. This plastic model captures the production turreted King Tiger in all its glory, with masterful depiction of the hull and its weld lines. The opening turret escape hatch allows admiration of the interior and gun breech, even after completion of the kit. Nylon mesh is included in the kit to recreate engine cover nets. Includes belt-type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3)
300035286€44.99
Article number: 300035286 Product: 1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3) About the Sd.Kfz.222 Among the many armored cars developed by Germany in WWII, the Sd.Kfz.222 is one of the most widely recognized. This light 4x4 vehicle had a distinctive hull shape thanks to its welded construction, and featured an open turret with mesh covers to protect the 3 crew members against grenades and shrapnel. It was armed with a 20mm cannon and 7.92mm machine gun and its exceptional off-road capability made it an excellent reconnaisance vehicle. About the Model •High-quality 1/35 scale assembly kit model of the Sd.Kfz.222 armored car. •Sharp, angular form of hull and turret accurately reproduced. •Open turret enables depiction of interior details such as the 20mm cannon, which features a metal barrel for enhanced realism. •Photo-etched parts for turret mesh covers included for even more detail. •Parts included for a DKW motorcycle and new parts such as hull-mounted tool box and headlight are also planned. •3 new figures are included in this kit: 1 commander and 1 radio operator located in the turret, and 1 motorcycle rider figure that can be modelled with different facial expressions and poses.
Military model vehicles 1:35
1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)
300035239€89.99
Article number: 300035239 Product: 1:35 Ger. SdKfz.9 Famo 18to Halftrack(8) Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the "Famo" In the wake of Blitzkrieg advances made by the Wehrmacht at the outbreak of WWII, the recovery of damaged or broken tanks from the battlefield proved relatively simple. After securing an area, reinforcing divisions could easily send inoperative vehicles back to the homeland for repair via railway. However, in the seesaw battles with the British Army in North Africa and against the Russian Army on the Russian front, the quick replenishment of tank strength became an indispensable element of Wehrmacht battle strategy. The utilization of the 18 ton Heavy Half-Track "Famo" proved fundamental to this strategy. The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops. About the Model ★1/35 plastic assembly kit of the largest half-track in the German Army. ★Overall Length: 243mm, Overall Width: 75mm. ★Highly detailed model captures the size and tank-towing power of the FAMO. ★Realistic treads and suspension. ★Synthetic rubber front tires and steerable front wheels for maximum realism. ★Rear gate and storage doors can be assembled in the open or closed position. ★Tank towing drawbar included. ★Can be assembled with or without engine side panels, revealing fully detailed engine. ★Engine can be assembled outside of FAMO. ★Eight figures (four variations) included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Simca S5 Staff Car (1)
300035321€27.99
Article number: 300035321 Product: 1:35 Ger. Simca S5 Staff Car (1) The Simca 5 was a small passenger car which debuted in March 1936. It was almost identical to the Fiat 500 Topolino as the car was actually designed by Fiat. The car was equipped with an independent front suspension, a 4-speed transmission, hydraulically-controlled drum brakes, and a 12-volt electrical system. At the time, the car was meant to be affordable for the French public, in the same way that the later Volkswagen Beetle and Fiat 500 brought inexpensive private motoring to the masses in Germany and Italy respectively. It was also very fuel efficient. Many were in use by the time WWII began, and the German Army captured large numbers of them when they occupied France. These were pressed into military service as staff cars for transporting personnel and liaison duties. Over 46,000 Simca 5s were built by the time production ended in 1946. About the Item • 1/35 scale assembly kit model of the Simca 5 staff car. • The elegant silhouette of the car has been accurately reproduced. • Details such as front & rear suspension have been realistically depicted. • Doors can be depicted in either open or closed position. • Comes with a German Army driver figure as well as 3 marking options. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Sturmgeschütz III B (1) StuG.
300035281€52.99
Article number: 300035281 Product: 1/35 WWII Ger.Sturmgeschütz III B (1) Germanys versatile Stug III was originally designed as an assault weapon, however also came to be used as a weapon of defense as the war progressed, providing both assault gun and anti-tank support. Based on the durable Panzer III chassis, the Stug III featured a monoblock structure with an L24 75mm short barreled gun mounted directly to the hull, eliminating the revolving turret and reducing overall height. The Ausf. B was the first truly mass produced Stug III with 250 produced from June 1940. Featuring wide tracks and powered by a 230hp Maybach HL 120 TRM engine the Ausf. B boasted a top speed of 40km/h. The Ausf. B saw action during the Balkans campaign in April 1941 and Operation Barbarossa in June, 1941. The simple construction leading to low costs and easy mass production made the Stug III one of Germanys most produced armored vehicles with over 10,000 produced during WWII.
Military model vehicles 1:35
1:35 Ger. Sturmtiger 38cm RW61 (1)
300035177€52.49
Article number: 300035177 Product: 1:35 Ger. Sturmtiger 38cm RW61 (1) In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully reproduced as a plastic assembly model kit. The main hatch on the superstructure can be depicted in either open or closed position, the rocket launcher and escape hatch are moveable even after assembly, the loading crane can also rotate, and the heaviness of the tracks is also realistically depicted. Also included in the set is one figure and four rockets. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 German Heavy Tank Destroyer Elefant
300035325€76.99
Article number: 300035325 Product: 1/35 German Heavy Tank Destroyer Elefant This is a 1/35 scale assembly model of the German Heavy Tank Destroyer Elephant. Extensive research was conducted by Tamiya's designers to bring the modeling world the most accurate rendition to date. Historical background In 1941, Porsche created a prototype tank which incorporated radical features including a gasoline-electric hybrid powertrain. In 1943, the tank was transformed into the Ferdinand tank destroyer armed with an 8.8cm PaK 43 L/71 gun housed in a large box-shaped superstructure and 90 units were produced. During the Battle of Kursk, they demonstrated superior anti-armor capability to knock out T-34 and KV-1 tanks at long range, but their slow speed and unreliability resulted in many being immobilized by mechanical troubles. In 1944, 50 surviving Ferdinands were given modifications, including the addition of a machine gun, a commander's cupola, and were re-designated with the name Elefant. The Elefant saw combat on the Italian and Russian fronts, and some fought until the very end of WWII during the Battle of Berlin.
Military figures & Accessories 1:35
1:35 German Infantry Mid-WWII (5)
300035371€20.49
Article number: 300035371 Product: 1:35 German Infantry Mid-WWII (5) • This is a 1/35 scale plastic figure assembly kit set. • Contains parts for 5 figures in realistic pose: a non-commissioned officer (NCO) with binoculars, a rifleman with his foot on some rubble, another with cases and one with grenade cases on the ground, plus a machine gunner. • Figures are depicted in mid-WWII M40 uniform, jack boots and suspenders. NCO and kneeling rifleman have a choice of helmet or cap. • A plethora of newly-molded accessories includes Kar98k rifle, MG34 machine gun, MP40 submachine gun and more.
Plastic model kits – the perfect hobby for children and adults
As a creative and varied hobby, plastic model making is popular among children, adolescents and adults alike. With time, patience and skill, complex plastic model kits containing hundreds of small parts can be turned into eye-catching models.
Plastic model making – what are plastic model kits?
Plastic model kits are made primarily of plastic (and more specifically, polystyrene). In general, the focus of plastic models tends to be on detailed designs rather than functionality.
Most plastic model kits consist of so-called “sprues” (plastic frames) containing individual parts, which must be separated before assembly. Depending on the difficulty rating, the parts are either unpainted or come ready painted or printed. If the parts are unpainted, they must be painted using a brush or an airbrush pistol (paints must be purchased separately). With unpainted parts, you can decide whether to follow the template or create your own design. With the right know-how and experience, you can also create custom models by combining parts from several different kits – so-called “kit bashing” or “scratch building”.
What is the recommended minimum age for plastic model kits?
Plastic models are often highly detailed, and therefore require a certain amount of skill – an important factor to bear in mind before purchasing a model making kit for your child. Depending on your child’s age, they may not have the full range of fine motor skills required to assemble a model, and may end up feeling frustrated. As a parent, you should choose an age-appropriate model and provide appropriate supervision and assistance during the assembly process. With adult supervision, some plastic model making kits are suitable for children as young as five.
Overview of Tamiya plastic model kits
Tamiya offers an extensive range of premium plastic model making kits, which are available in the following categories:
Car model making
For many people, model making is all about cars. As you’d expect, cars comprise a significant part of our model making range – from classic racing cars to the latest models and stylish old-timers, our car model making category is a dream come true for car enthusiasts.
Motorcycle model making
Motorbikes are the quintessential symbol of freedom. Given their extensive popularity, they also constitute an important part of our model making range. Fans of motorbikes can take a look at our motorcycle model making range, which contains numerous road and racing models from Suzuki, Honda and Yamaha.
Military model making
If you’re a fan of military-themed models, take a look at our extension collection of military model making kits, where you’ll find vehicles in 1:16, 1:35 and 1:48 scale as well as a range of military figures and accessories.
Aircraft model making
When it comes to aircraft model making, the sky’s the limit – at least in the imagination. Take a look for yourself and discover our extensive range of historic aircraft modelling kits!
Ship model making
In addition to model vehicles and aircraft, we also offer various model ship kits in different scales.
Our already extensive product range additionally includes model cars, model ships, and model aeroplanes in various designs, offering something for every taste!
Other model kits
If you have other interests besides cars or are looking for model building products that are particularly suitable for children, you will definitely find what you are looking for in the Other model kits category. Discover dinosaur model building, for example.
Plastic model making: plastic model kits for every taste
Whether you’re looking for a trendy convertible, a propeller aircraft, a military battleship or a vintage motorbike, we offer a diverse range of plastic model kits for people of all ages and abilities – from entry-level sets for beginners and young children to professional kits with over a thousand pieces.