Tamiya Product Range

RC buggys (2WD/4WD)

Tamiya 1:10 RC Holiday Buggy Bundle

Product bundle consisting of: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 / RC-Reflex Pro 3 Electric Set   Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 Article number: 300058470 Product: 1:10 RC 2 WD Holiday Buggy 2010 DT-02 The Holiday Buggy was one of Tamiya’s classic R/C car kits from the 1970’s. It is available as a re-release assembly kit. The classic body comes mounted on the DT-02 chassis which has its battery pack loaded in the center of the bathtub frame providing excellent handling performance even on rough surfaces. The DT-02 machine is a simple 2WD chassis which features a straightforward, rugged design to ensure easy assembly and superb reliability while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the DT-02 chassis is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control. Note: When installing a regular sized 540 motor, the following parts are required: 17T Pinion Gear (part# 3515005) 3mm Grub Screw (part# 50576) Motor Plate (part# 4305125)     Article number: 500500091 Product: RC-Reflex Pro 3 Electric Set 500500091 RC-Reflex Pro 3 Electric Set is the ideal add-on set for ARR and kit models of cars and boats. The interference-free 2.4 GHz radio system with two fully proportional channels, servo reverse, trim, dual rate and fail-safe offers precise control. Includes: Mini receiver, CS-6 steering servo (6 kg, metal gears), 7.2 V/3000 mAh NiMH drive battery with Tamiya plug, 2-in-1 charger (max. 2 A), transmitter batteries and instructions.  

On-road RC cars (2WD/4WD)

1:10 Motul Autech GT-R, RC assembly kit, TT-02

€159.99

The 1:10 RC Motul Autech GT-R assembly kit brings the shape of the 2014-spec NISMO GT-R to the workbench in a form built for running as well as display between sessions. Its polycarbonate bodyshell captures the low, sleek lines of the Super GT GT500 machine, linking a championship-winning race car to a chassis made for regular RC use. At the centre of the kit is the TT-02 touring car chassis, the successor to the TT-01 and an entry-level platform developed to make assembly more approachable for new RC builders. The shaft-driven layout gives the car a clear mechanical base, while the included TBLE-02S electronic speed controller works with brushed and brushless setups. A 540 electric motor is supplied for the standard drive package, so the core drivetrain is already matched to the chassis concept. Tamiya also positions the TT-02 as a platform with room to grow, with compatible Hop-Up Options available for later tuning and setup changes. Once assembled, the model suits open runs on parking lots and laps on prepared circuits, where the touring car format and race body styling feel most at home. Radio gear, a battery pack, a charger and paints are required separately.

Model car kits 1:24

1:24 Nissan Skyline GT-R R34 V-Spec II model kit

€24.99

This 1:24 scale assembly kit recreates the Nissan Skyline GT-R R34 V-Spec II with the compact, muscular proportions that define the late-generation GT-R shape. The body combines the low front bumper, hood vent, side mirrors and prominent rear wing into a build that reads clearly even before paint and markings are applied. The kit is designed to depict 2 versions, V-Spec II and V-Spec II Nur, with the choice made before assembly. Optional parts in the kit include an extra GT wing stay, drilled brake discs and an exhaust pipe, allowing the finished car to follow the selected specification. The instructions also call out interior, chassis, under panel and rear wing stages separately, giving the build a clear structure across the rolling chassis, cabin and exterior sections. Clear parts are used for the windows and lights, with the taillights called out in transparent orange and red detail areas. Assembly takes 600 minutes. Paints, cement and tools are required separately. During the build, the chassis receives the interior tub, underbody panels and body shell in distinct stages, making the model well suited to a steady bench session or a longer weekend project. The painting guide lists 5 body colour finishes for the Skyline GT-R V-Spec II, including solid white and 4 metallic colours, while the decal steps cover placement and smoothing for the final exterior details.

Military model vehicles 1:35

1:35 Ger. 7,5cm Anti Tank Gun(PAK), assembly kit

€7.59

This 1:35 scale plastic model assembly kit depicts the German 7.5 cm Pak40 L/46 anti-tank gun, a long-barrelled WWII field piece with a commanding silhouette that stands out in a military display. The finished build combines the gun shield, carriage and barrel layout into a focused artillery subject that suits shelf presentation, scene building and historically themed collections. The model captures small operating details as part of the build, including the sight, handle, breech block area and towing hardware. Assembly time is stated as 600 minutes, giving this kit the depth and part-by-part pace expected from a detailed scale project. The gun body is shown with split trails, spoked wheels and a rear towing hook, while the shield and carriage structure give the model its characteristic field stance. Painting references in the source material show finishes such as German Grey, Dark Yellow, Matt Black, Gloss Red, Gun Metal and Brass or Gold for selected details. Kit, instructions and decor are included. On a worktable, the moving barrel and breech details make the construction process more engaging as the mechanism takes shape step by step. Once completed, the gun, figures and ammunition accessories can be arranged as a firing position, a transport halt or a diorama scene with crew activity centered around the carriage and trail area.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Sdkfz.251/1 Hanomag, plastic model kit

€22.99

This 1:35 plastic model kit captures the WWII Sdkfz.251/1 Hanomag as a compact half-track troop carrier with angular armour, an open fighting compartment and the distinctive combination of front wheels and rear caterpillar tracks. The layout gives the finished build a strong sense of mechanical purpose on a shelf or as the centrepiece of a military diorama. The kit is based on the Type C vehicle and draws on the form used in German armoured personnel carriers during the war. Assembly time is stated as 600 minutes, which suits a build with separate hull sections, interior floor components, bench seating, suspension parts, machine gun mounts and exterior fittings such as tools, lights and fenders. Historical notes in the kit material describe a Maybach HL42 6-cylinder 4,171 cc engine, 100 hp output, 4 forward gears and 1 reverse gear, plus armour thickness of 14.5 mm at the front, 8 mm on the sides and 6 mm at the bottom. The full-size vehicle reached 55 km/h and carried 12 fully armed soldiers in addition to 2 crew members. Painting and finishing add another layer of detail, with required paints listed separately and figure colour references for helmets, uniforms, equipment and weapon parts. The completed half-track works well in a convoy scene, a troop deployment setting or a broader 1:35 military display where the figures, markings and open compartment can be arranged to suggest movement and field action.

Model car kits 1:24

1:24 Porsche 911 GT3 RS (992), plastic model kit

€45.99

This 1:24 scale plastic model kit recreates the Porsche 911 GT3 RS (992) as a static display build with a length of 190 mm, width of 85 mm and height of 56 mm. The body shape brings out the car's dramatic air vents, fins and wide performance stance, creating a display piece with strong road and circuit presence. The build focuses on details that give the finished car its distinctive European-spec character. It can be assembled in left hand drive form, and the Weissach package styling is reflected in the wheel shape plus carbon fiber sections on the hood, roof, rear wing and side mirrors. Inside, the shaped interior is joined by a roll cage, door straps and shift paddles, while decals add dashboard graphics, mesh seat surfaces, door linings and headrest logos. Metal transfers are supplied for the rear-view mirror, side mirrors and rear lights, and solid synthetic rubber tires complete the stance with a realistic road-car finish. Movable brake calipers and discs add another layer of realism when the model is viewed from low front or side angles. Masking stickers are included for painting the windows and headlight covers, helping keep these clear areas neat during finishing. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 3,7cm PAK 35/36, plastic model kit

€7.19

This 1:35 scale plastic model assembly kit depicts the German 3,7cm PAK 35/36 anti-tank gun used by German WWII forces, combining a detailed field gun with 4 figures for a compact military display. The multi-part construction gives the carriage, shield and barrel assembly a convincing scale look that reads clearly in a diorama setting. The gun is designed with working elevation and traverse, so the finished build can be set at different firing positions instead of remaining fixed in a single angle. A choice of standard or late-war barrels adds a second configuration path during assembly and changes the character of the completed artillery piece. The included figures support a crew scene around the gun rather than a stand-alone vehicle display, and the accessories help fill out the emplacement with extra visual context. Assembly is required, with a stated build time of 600 minutes. On a shelf, in a cabinet or as part of a wider 1:35 military scene, the model creates a focused snapshot of artillery deployment with crew interaction around the gun. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Zakspeed Capri Turbo, plastic model kit

€30.99

The 1:24 Ford Zakspeed Capri Turbo plastic model kit brings a standout DRM racer to the workbench with a sharply rendered body, a low nose and a wide competition silhouette. At 210 mm long, 86 mm wide and 51 mm high, the finished model has the stretched proportions that made this car so distinctive on late-1970s grids. The body shape is paired with a realistically depicted cockpit, where the roll cage gives the interior a clear racing character beyond the outer shell. Wheels with aero discs and solid synthetic rubber slick tires continue that track-focused specification and help the completed model carry the right period look from every angle. High-quality Cartograf decals supply the livery markings with crisp printed detail, while the included driver figure adds another authentic element to the cabin scene. This kit suits focused bench sessions where body assembly, decal placement and interior detailing each have room to stand out. Paints and glue are required separately, and the finished model lends itself to shelf display, motorsport collections or a line-up of classic touring and DRM race cars.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.171 Panther A, model kit

€21.99

This 1:35 assembly kit recreates the Ger. SdKfz.171 Panther A as a non-motorized display model with the long 75 mm gun, sloped hull surfaces and the added front hull MG 34 that marked the Ausf. A configuration. The finished build captures the low, purposeful stance of the Panther as it sits on its full tracked running gear with a sharply angled turret and upper hull fittings in place. Construction is spread across separate lower and upper hull sections, a multi-part turret, running gear components and linked tracks, so the model develops through the same major structures that define the original vehicle. The kit also includes commander and driver figures, adding scale reference and more life to hatch and turret scenes. Exterior details such as rails, tools, storage parts, spare track sections and machine gun fittings give the surfaces more depth once painted. Assembly time is stated as 600 minutes. Paints are required separately. On the bench, the model suits careful painting of the road wheels, tracks, tools and crew uniforms before final placement. Once completed, the 1:35 scale makes the tank a strong display piece for military model shelves, diorama settings or a World War II armour lineup where the Panther A shape and equipment can be appreciated from every angle.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 German Machine Gun Team, plastic model kit

€16.79

This 1:35 plastic model kit recreates a mid-WWII German machine gun team with 5 figures arranged in active combat poses, giving historical dioramas a clear focal point. The set combines infantry action, crew coordination and support equipment in one scene, from the soldier firing the MG42 to the team working with the Lafette and the carrier bringing forward ammunition. Each figure is assigned a distinct role, which helps the finished build read as a coordinated battlefield position rather than a row of separate soldiers. Newly molded components refine the look of the Lafette and accessories, and the ammunition cases use slide molding for sharper detail on edges and surfaces. The sculpting supports realistic placement of weapons and gear, so the group can be arranged with convincing spacing around cover, armor or terrain features. Assembly is required, and the stated assembly time is 600 minutes. On a display base or within a larger battlefield layout, the 5-figure team adds movement and narrative through firing, command and resupply actions. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Sand Bags Set, diorama accessory kit

€5.49

The 1:35 Sand Bags Set brings defensive structure and scene-building flexibility to military dioramas with 48 individual pieces arranged as 36 standard sandbags and 12 half bags. In 1:35 scale, these parts help shape gun pits, low barricades and vehicle-mounted stowage details that give a display a more grounded field position. The mix of full and half bags supports more convincing contours than a single repeated shape alone. Half bags help close curves, tighten corners and break up straight runs, which is useful when building a circular artillery nest or a shorter wall line with a less uniform edge. The set is supplied as an assembly kit, and the stated assembly time is 600 minutes. Cement and paints are required separately. On a display base, the pieces can frame an artillery position, define infantry cover or add improvised armour detail to an armoured vehicle front. The sandbag shapes also work as transition elements between vehicles, figures and terrain, helping separate open ground from defended positions while keeping the scene consistent in 1:35 scale.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CB1000F, plastic model kit

€44.99

This 1:12 plastic model kit captures the Honda CB1000F with the long, continuous lines that run from the fuel tank through the side panels to the tail. At 178 mm in length, 73 mm in height and 109 mm in width, the finished motorcycle has enough scale presence to show the roadster proportions clearly on a shelf or workbench. The bodywork uses a one-piece fuel tank and fender construction, while the optional headlight cowl allows different finishing directions based on the chosen marking version. Four marking versions are provided: Wolf Silver Metallic with a blue stripe, Wolf Silver Metallic with a grey stripe, Graphite Black, and the Japanese-market SE Wolf Silver Metallic version. Variant D adds dedicated radiator grille and quickshifter parts as well as its own decals. Small visual elements are handled with equal care, from the chrome-rimmed headlight area to the clear red taillight parts and masking stickers for the speedometer and fuel cap. The build suits careful painting and finishing sessions, with separate inner and outer brake disc parts that support more precise paint application. Vinyl tubing recreates clutch, brake and other lines, and the leather-texture seat surface adds another distinct finish contrast beside the synthetic rubber tyres. Tools, paints and modeling glue are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-12R, motorcycle model kit

€42.99

This 1:12 motorcycle model kit recreates the 1999 Kawasaki Ninja ZX-12R with the long, low stance and aerodynamic bodywork that made the original machine stand out among high-speed sportbikes. At 173 mm long, 70 mm wide and 101 mm high, the finished build has a substantial presence while keeping the proportions of the full-size bike clear from nose fairing to tail section. The kit focuses on the ZX-12R's technical character with an authentic monocoque frame, a detailed 4-cylinder engine and suspension parts that give the model real mechanical depth. Semi-transparent green fairing pieces reproduce the distinctive cowling and side wings, and their screw-mounted attachment allows the exterior panels to be removed after assembly to expose the structure beneath. Chrome plated muffler parts add contrast against the bodywork, while solid rubber tires with tread pattern bring a more convincing road-bike finish than hard molded alternatives. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. On a shelf, desk or in a display case, the model presents the ZX-12R as a landmark superbike from the era of 300 km/h performance machines. During the build, the combination of engine, frame, fairing and exhaust sections creates a focused project with clear mechanical variety from step to step.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Midnight Pumpkin Metallic/Chrome, RC kit

Midnight Pumpkin Metallic/Chrome brings classic 1950's pick-up truck styling into a 1:12 RC assembly kit with a bold black metallic body and silver-plated wheels. The oversized tyre setup gives the model its unmistakable stance on the track, while the plated body sections create a bright contrast against the darker finish. The chassis uses an ABS box-type frame and a 14.7:1 gear ratio, combining a compact layout with gearing tuned for lively running. Front independent swing axle suspension and a rear rolling rigid setup shape how the model handles direction changes and uneven surfaces. A 540 Type motor is included, and an electronic speed controller is supplied to manage acceleration input during driving. Parts H and J, together with the body, are finished using a vacuum plating technique that sets this version apart visually from the original release. A wheelie bar is included for upright stunt runs, adding another driving mode beyond regular laps and straight-line passes. Radio gear, a battery pack, a charger and paints are required separately. On a home track, in a hobby room, or during club running sessions, the combination of retro truck proportions, plated details and wheelie-ready setup gives this model a strong visual presence in motion.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mercedes-Benz 300SL, plastic model kit

€60.99

This 1:24 plastic model kit captures the Mercedes-Benz 300SL with the long hood, compact cabin and unmistakable gullwing door layout that made the original road car a lasting reference point in sports car design. The finished model measures 188 mm in length and 75 mm in width, giving the coupe a compact display footprint while leaving room for visible body contours, chrome-style trim and interior detail. A recreated tubular space frame brings one of the 300SL's most distinctive engineering features into the build, and the engine sits beneath an opening hood with a faithful depiction of the power unit. The gullwing doors also open, and small support struts allow the doors to be shown in the raised position. Nylon mesh is included for the front air intake, while metal-plated parts reproduce side bars, bumpers and other exterior trim. Metal transfers add emblem and mirror details, and masking stickers help define painted window areas during finishing. With an assembly time of 600 minutes, the kit suits a slower, detail-focused build where bodywork, trim and mechanical features can be finished step by step. On a shelf, desk or display cabinet, the opening panels and visible frame structure give the model different viewing angles, from the engine bay to the roof-hinged doors that define the 300SL silhouette. Paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Brick Wall Set, diorama assembly kit

€5.49

This 1:35 Brick Wall Set is a diorama assembly kit built around miniature masonry detail, turning a simple wall section into a scene with depth, damage and architectural character. Red-brown brick surfaces, white mortar lines and broken openings give the finished build the look of a weathered structure that frames military miniatures and urban layouts with convincing scale presence. The set is designed as a precision model kit, so the wall rises brick by brick rather than as a single molded piece. Stepped edges at the corners show how the courses interlock, while unfinished top lines and breach sections create the irregular silhouette seen in ruined buildings. Door and window sections add facade variety, making it possible to shape anything from a street-side wall to a partial room or building front. Assembly is required and takes 600 minutes. Cement and paint are required separately. On a display base, the completed sections can define cover lines, breached entrances or the edge of a damaged structure around 1:35 figures and vehicles. The same brick elements also suit town scenes, interior settings and custom architectural backdrops where layered wall texture matters as much as the overall outline.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Tank Barricade, assembly kit

€5.49

The 1:35 Diorama-Set Tank Barricade assembly kit brings defensive obstacle detail into military scenes with 12 separate barricade depictions that change how roadsides, checkpoints and front-line positions read at a glance. In a finished display, the mix of wooden structures and metal anti-tank barriers creates stronger spacing around vehicles, figures and ground cover while keeping the focus on the main scene. This plastic model assembly kit is designed for diorama building rather than stand-alone display, so each barricade can be placed to frame movement routes, block access points or break up open terrain. The set creates 6 wooden barricades and 6 metal barricades, giving repeated forms that help a scene look planned rather than sparse. The crossed-beam shapes also open up painting work, with room for timber tones, chipped finishes, rust effects and dust treatment across multiple pieces. Scope of delivery: kit, instructions. A stated assembly time of 600 minutes supports a longer build with time for part preparation, painting stages and final placement in a 1:35 layout. The set works especially well beside military vehicles, infantry figures, street sections and battlefield groundwork where obstacle lines help define direction, cover and tension within the scene.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Pkw.K1 Kübelwagen Typ82, plastic model kit

€17.99

This 1:35 plastic model kit depicts the Ger. Pkw.K1 Kübelwagen Typ82 with the compact proportions and functional military layout that defined the original vehicle. The body shape is rendered with attention to the plain press-lined construction, giving the finished model a clear period look on the workbench or in a diorama setting. The build reaches well beyond the outer panels. Suspension arms, under guards and the suspension area are represented with realistic surface detail, so the underside carries substance as well as the visible bodywork. Inside the cabin, the instrument panel and pedals add finer structure to the open interior, which remains easy to see once the model is complete. A driver figure in a relaxed pose is included, adding a human element that suits static display scenes. Assembly takes about 600 minutes. Paints, cement and tools are required separately. Display options add flexibility to the finished result. All 4 doors can be built open or closed, making it possible to stage the vehicle in a service area, beside other 1:35 military subjects or as a standalone historical display with the figure placed at the driver's position. The open-body format and visible cabin details reward careful finishing, especially when weathering, painting small controls and setting the final stance of the model.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. IV Ausf. D, plastic model kit

€21.99

This 1:35 plastic model kit depicts the Ausf.D variant of the German Pz.Kpfw.IV, combining the compact force of a short-barrelled 75 mm gun with the broad, angular layout that defined this early WWII tank. The finished model carries the vehicle's strong profile into a display piece that reads clearly from turret to hull and tracks. The assembly kit is designed as an unbuilt scale model rather than a finished replica, with the build centered on shaping and detailing the Ausf.D form in miniature. Parts are provided to recreate either an early or a late production version, which gives the project 2 historically distinct directions within the same subject. The 3 included figures wear uniforms associated with the invasions of Poland and France, adding period context to hatch positions and overall presentation. Assembly time is stated as 600 minutes. Paints, tools and cement are required separately. On the worktable, the model supports a measured build pace with room for trimming, fitting and surface finishing across the hull, turret and running gear. Once completed, the 1:35 scale format and the crew figures lend the tank a convincing presence in a military miniature display, whether shown as a standalone vehicle or as part of a wider WWII scene.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Sd.Kfz. 250/3 Greif, model kit

€25.99

The 1:35 Ger. Sd.Kfz. 250/3 Greif model kit brings a distinctive WWII German half-track subject to the workbench with a compact military vehicle format that suits both focused assembly sessions and finished display. Its Greif designation and Sd.Kfz. 250/3 configuration give the build a clearly defined historical identity rather than a generic armoured vehicle outline. As a scale model, this kit centres on the construction and finishing process, with the 1:35 format fitting naturally into established military model collections and diorama layouts. The half-track configuration adds visual contrast through the combination of front wheel steering and rear tracked running gear, a layout that sets this vehicle apart from fully wheeled or fully tracked subjects. The compact proportions also make painting, weathering and placement easier to plan within shelf or scene space. Builders can use the WWII setting to pair the finished model with period figures, terrain elements or other vehicles from the same era where available separately. On the bench, the subject offers a concentrated military modelling project with a recognisable silhouette and strong display presence once completed. In a cabinet, on a shelf or as part of a broader 1:35 scene, the Ger. Sd.Kfz. 250/3 Greif adds a specific vehicle type and wartime context to a scale armour lineup.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1), plastic model kit

€45.99

This 1:35 plastic model kit captures the German SdKfz.181 Tiger I in its mid-production form, combining the heavy tank's unmistakable profile with the focused build process of a classic military miniature. The long 88 mm gun, broad hull and interleaved running gear give the finished model a commanding presence on the workbench and in a display setting. The kit represents the mid-production variant built between July 1942 and August 1944, a version defined by specific external changes and reproduced here with attention to shape and equipment. The lower hull build develops through separate suspension arms, multiple wheel assemblies and link type tracks, with 100 links used for each track run. Exterior subassemblies include exhaust units, a gun travel lock, Bosch headlight, jack, storage box and turret fittings, which create more painting stages and sharper visual contrast across the surface. A rotating turret and detailed gun assembly add another layer of realism once the upper hull is complete. Assembly is required, with a stated build time of 600 minutes. Cement and tools are required for construction, and paints are required separately. The finished model suits builders who enjoy careful track assembly, historically styled camouflage work and the visual character of WWII armored vehicles in 1:35 scale.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 M3A2 Half Track, plastic model kit

€21.99

This 1:35 scale M3A2 Half Track assembly kit captures the look of the U.S. personnel carrier with an open fighting compartment, front wheels and rear track layout, and a body shape built around armored transport duty. Interior and chassis recreations give the model substance beyond the outer panels, so the finished vehicle reads convincingly from low angles and through the open upper section. The build allows different display choices through radiator shutters and doors that can be assembled open or closed. That flexibility changes how much of the inner structure remains visible and helps tailor the scene to workshop, convoy or combat presentation. Steerable front wheels add another mechanical detail to the finished model and make it easier to set the vehicle into a natural parked or maneuvering pose. The set also supplies 9 figures, which opens up crew arrangements across the cab, troop compartment and exterior positions instead of limiting the model to a single static viewpoint. Accessories such as jerry cans, blankets, mines and small arms help shape the vehicle into a loaded field transport with more context around its mission role. On a shelf, in a diorama or as part of a wider World War II military lineup, the M3A2 Half Track brings together vehicle detail, crew presence and scene-building potential in one focused scale build.

Model aircraft kits 1:48

1:48 Ger. Focke Wulf Fw190 A-3, aircraft model kit

€28.99

This 1:48 Ger. Focke Wulf Fw190 A-3 assembly kit captures one of the Luftwaffe's key WWII fighters in a display size that still leaves room for fine surface and engine detail. With a finished wingspan of 219 mm and length of 184 mm, the model brings the compact, muscular proportions of the Fw190 A-3 onto the workbench and into the display cabinet. The build focuses on the aircraft's distinctive structure and equipment. Inside the fuselage, the cockpit is formed from separate side consoles, an instrument panel, rudder pedals, control stick and seat, and the seated pilot figure can be fitted as an option. The clear parts allow the canopy to be shown open, which keeps the cockpit visible after completion. Around the nose, the radial engine layout is supported by detailed cooling fin treatment, exhaust parts and a cooling fan, while the landing gear, tailwheel and propeller complete the characteristic stance of the aircraft on the ground. Assembly time is stated as 600 minutes. The painting and finishing stage adds another layer of historical character through 3 marking options, including an aircraft flown by Hans Hahn. Camouflage placement, fuselage codes and insignia can be applied with reference to the included markings, making the completed aircraft suited to both focused bench sessions and shelf display alongside other 1:48 scale aircraft.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC assembly kit, TT-02

€169.99

The Audi R8 LMS 2008 arrives here as a 1:10 R/C assembly kit that combines GT3 race car presence with the proven TT-02 platform. Its 1.0 mm polycarbonate body recreates the shape of the 2008 LMS with a low roofline, pronounced side sections and a large rear wing, giving the finished car a sharp circuit look whether it is lining up on the floor or resting on a shelf between runs. The TT-02 chassis uses a shaft-driven 4WD layout, and the kit also includes an ESC and a Type 540 Torque-Tuned motor for a complete core drive package. With overall dimensions of 434 mm x 194 mm x 120 mm and a 257 mm wheelbase, the chassis sits in classic touring car territory and gives the body its long, planted proportions. Black 16-spoke wheels and racing slick tires complete the competition style, while stickers and masking stickers support the paint process and help bring the race livery to life with cleaner window lines and graphic placement. This assembly kit suits bench sessions focused on body finishing, decal work and chassis building, then moves naturally into on-road driving once the separately required equipment is added. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 BMW M3 Sport EVO 1992, RC assembly kit

€169.99

The BMW M3 Sport EVO 1992 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic touring car silhouette with a shaft-driven 4WD layout built for controlled on-road running. The lightweight 1.0 mm polycarbonate bodyshell comes unpainted, giving the orange Jagermeister race look and the updated markings their place during the finishing stage. The TT-02 platform uses an enclosed drivetrain layout, and the standard 257 mm wheelbase sets the proportions for this touring car format. Silver mesh style wheels are paired with slick tyres, matching the circuit-focused character of the body shape and rear wing. Side mirrors and the rear wing are supplied as ABS add-on parts, adding extra definition to the shell once fitted. The kit also comes with stickers and masking stickers for the paint job, while optional tuning parts are available for builders who want to refine the setup over time. With overall dimensions of 448 mm length, 185 mm width and 135 mm height, the model has the low, wide presence associated with early 1990s DTM machinery. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor track, a car park circuit or a home workbench, the combination of scale bodywork, matched electronics and classic racing livery gives each stage of the build and each run a clear motorsport focus.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mini Cooper Rally '94, RC assembly kit, M-05

€154.99

The 1:10 Mini Cooper Rally '94 RC assembly kit combines compact front-wheel-drive handling with the distinctive shape of the classic rally car. Built on the M-05 chassis, it pairs a semi-monocoque frame with a low center of gravity, creating a focused layout that suits road running and careful setup work alike. The chassis uses a short 210 mm wheelbase and measures 322 mm long, 160 mm wide and 140 mm high. Its gearbox, motor, battery, receiver, servo and speed controller sit close to the centre of the frame, a layout chosen to keep weight distribution even across the car. The narrow structure gives the model a tidy footprint, while shaft drive forms the basis of the 2WD transmission. An electronic speed controller is included, along with a Type 540 Torque-Tuned motor. The unpainted polycarbonate bodyshell leaves the exterior ready for a custom finish, and the platform is compatible with many Tamiya bodies. On the bench, the compact dimensions and clearly defined chassis layout support a build that stays close to the mechanical essentials. Once completed, the short-wheelbase M-05 format suits smooth tarmac runs, display between sessions, and detailed body finishing that brings the Rally '94 character into view. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, 2WD

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the configurable BT-01 platform for hands-on on-road running. At 457 x 185 x 135 mm, the finished model carries the Supra profile with a wide stance, a defined nose and the visual presence of a full-size coupe scaled for the bench and track. The BT-01 center frame is designed so the battery pack, motor and RC equipment setup can stay in place while the final gears and steering linkage are repositioned to change the drivetrain layout. That structure allows front-wheel drive, front-motor rear-wheel drive and midship rear-motor rear-wheel drive choices, with 6 setups available in total. Unitized sections for the motor mount, final gears and suspension keep the chassis layout organized during the build and during later maintenance. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further setup tuning. The 4-wheel double wishbone suspension mirrors left to right and works with friction dampers for a clear, mechanical on-road setup. The 1.0 mm polycarbonate body gives the shell its light form over the chassis, making the Supra lines stand out during painted display and radio-controlled driving sessions alike. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:12

1:12 HONDA RA273, plastic model kit, PE parts

€104.99

The 1:12 HONDA RA273 plastic model kit captures Honda's 1966 Formula 1 machine in a large-format build with PE parts and finely reproduced race-car engineering. At 333 mm long, 143 mm wide and 70 mm high, the assembled car gives the monocoque proportions, exposed mechanical sections and low body shape enough space to read clearly on the bench and in a display setting. The build centers on the historic 3-liter V12, with fuel pipes, ignition cables and 12 aluminum air funnels forming a dense engine bay that rewards close work. A removable nose cowling opens the front section for a view of inner mechanics such as the radiator, adding another layer of structural detail beyond the outer bodywork. Hollow rubber tires carry accurate tread patterns, and the kit also includes a driver figure plus markings for No.18 Richie Ginther and No.11 John Surtees. Paints and glue are required separately. The moving steering linkage and sprung suspension give the finished model extra realism while handling and positioning. During assembly, the mix of molded parts, photo-etched components and metal transfers creates a build that shifts between body shape, cockpit detail and race hardware, echoing the technical character of a mid-1960s Formula 1 car.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1100S Katana, plastic model kit

€24.99

This 1:12 plastic model kit captures the Suzuki GSX1100S Katana with the angular fairing, compact windscreen and long tank profile that defined the motorcycle when it appeared in 1980 and reached the public in 1981. The finished replica brings that sharp road-bike silhouette onto the workbench while giving the build real substance through mechanical detail and mixed materials. The 4-cylinder DOHC engine is a focal point, and the kit goes beyond the main block by adding ignition cords, brake pipes and instrument cables with vinyl tubing. The parts layout also includes front and rear tyres, decals, metal hardware and 80 cm of tubing for routing lines across the model. Star-shaped die-cast wheels, treaded synthetic rubber tyres and metal screws at points such as the wheel axles add structure and visual contrast across the chassis. Paints, cement and tools are required separately. During assembly, the Katana takes shape through distinct subassemblies such as the engine, rear swing arm, front fork, cowling and fuel tank, making the 600-minute build suited to model makers who enjoy detailed finishing work. Once completed, the combination of exposed engine areas, twin megaphone mufflers, disc brake detail and bold tank graphics gives the motorcycle a strong display presence from either side.

Model car kits 1:24

1:24 Peugeot 206 WRC, plastic model kit

€29.99

The 1:24 Peugeot 206 WRC plastic model kit brings a well-known rally silhouette to the workbench with a wide body, roof air intake and large rear spoiler that give the finished car a clear competition look. White multi-spoke wheels, window glazing and a detailed cockpit help the completed build read convincingly from shelf distance and at close range. The assembly kit format leaves room for hands-on finishing across body, interior and livery, with racing decals covering the Peugeot, 206 WRC and sponsor graphics shown on the car. Through the side windows and windscreen, the interior detail adds another layer to the display result instead of leaving the cabin as a dark empty space. The body styling reflects a WRC setup with aerodynamic add-ons and rally-focused proportions rather than a standard road car shape. Assembly is required, and the stated build time is 600 minutes. Paints, tools and cement are required separately. On a hobby desk, the model supports a measured build pace with separate stages for preparation, painting and decal work. Once completed, the Peugeot 206 WRC suits display in a motorsport lineup, on a shelf with other 1:24 subjects, or as a focused standalone rally car with period race character.

Model car kits 1:24

1:24 Porsche 911GT2 Club Sport, model kit

€32.49

This 1:24 scale model kit captures the Porsche 911GT2 Club Sport/Streetversion with the low, wide presence that defines the full-size car. The finished model measures 177 mm in height and 81 mm in width, and the body shape recreates the screw-fastened over fenders and oversized rear wing that set this version apart on sight. The build focuses on the details that give the car its road-and-circuit identity. A crisply reproduced roll cage sits inside a carefully rendered interior, so the cabin keeps its stripped, competition-inspired look even when viewed through the windows. Metal transfer parts are provided for the wheels, headlights and reflectors, bringing finer definition to areas that catch the eye first on a finished display model. Solid rubber tires complete the stance with a realistic surface finish and a more convincing contrast against the body and wheel parts. Assembly is required, with an indicated build time of 600 minutes. The scope of delivery includes the kit, instructions and decor. Paints, cement, tools and sandpaper are required separately. On the bench, the model offers a focused car-building project; once completed, the wide arches, large rear wing and detailed cockpit give the finished Porsche a strong shelf presence from every angle.

Model car kits 1:24

1:24 Porsche Turbo 1988, assembly kit, static model

€35.99

This 1:24 assembly kit captures the 1988 Porsche 911 Turbo in static display form, bringing the car's unmistakable silhouette into a build centered on shape, proportion and surface detail. Front and rear overfenders, the large rear wing and the broad road stance give the finished replica the visual weight that made the Turbo such a standout within the 911 line. The body design is newly created to suit the extra wide tires, so the model reflects the fuller arches and planted look of the road car rather than a standard narrow-body layout. Under the chassis, realistic engine detailing and a separately molded exhaust pipe add mechanical definition that remains visible when the model is handled or displayed from a lower angle. Synthetic rubber tires add tread texture that contrasts with the hard body surfaces, and metal transfers refine the mirrors and logo with a crisp finish that printed markings cannot match. Assembly time is stated as 600 minutes. Instructions and decor are included. Paint and cement are required separately. On the workbench, the kit supports a measured build with trimming, painting and decal placement shaping the final appearance step by step. Once completed, the model suits shelf display, cabinet presentation or placement alongside other 1:24 sports car subjects, where the widened bodywork and rear wing immediately mark out the Turbo identity.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota GR Supra Custom, plastic model kit

This 1:24 scale plastic model assembly kit recreates the Toyota GR Supra Custom as a detailed static display model with a finished size of 183 mm long, 85 mm wide and 54 mm high. The low, athletic proportions and the tuned exterior give the coupe a strong shelf presence, whether shown in a single-car display or alongside other modern road car builds. The body styling focuses on the custom specification, with spoilers, side skirts and side door garnishes worked into the shape of the car rather than treated as separate visual extras. New F Parts supply the aerodynamic components together with parts for the trunk spoiler and wheels, which helps the build reflect the intended TRD-inspired look in a consistent way. The shaped interior and chassis add further structure to the model, while the suspension detail supports a convincing stance beneath the body. TRD 19-inch aluminum wheels are reproduced in scale, and the new decals carry realistic TRD logo renderings for the center hubs. Metal transfers and masking stickers are included. Cement and paint are required separately. The build also offers a choice of Japan, U.S. and Europe versions, allowing the finished car to be tailored to a preferred regional specification. On the workbench, that mix of body detailing, wheel design and version choice gives the assembly process a clear visual payoff at each stage. Once completed, the model suits display in a cabinet, on a desk or as part of a 1:24 sports car lineup.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Supra, plastic model kit

€28.49

This 1:24 Toyota Supra plastic model kit recreates the 1993 sports coupe as a static display build with the strong proportions that defined the full-size car. The wide body, oversized rear wing and distinctive coupe profile give the finished model a planted look that stands out on a shelf, while the steerable front wheels add a mechanical touch during final positioning. Construction focuses on the areas that give the car its character. The kit reproduces the engine bay and interior, so the build moves through chassis work, cockpit detail and front-engine installation rather than only closing up a body shell. Wheel assembly follows the original staggered layout with narrow front tyres and wide rear tyres, and the instructions also show left- and right-side specific parts for the front upright setup. Builders can finish the body in 1 of 6 documented colour schemes for the 1993 Supra, including Metallic Silver, Super Red, Super White, Black, Deep Blue and Dark Brownish Gray Mica, with black or two-tone interior treatments. Assembly time is stated as 600 minutes. Cement and paints are required separately. Once completed, the model suits display in a cabinet, on a desk or alongside other 1:24 road car builds, where the detailed bodywork, cockpit and engine area reward viewing from several angles.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Allied Vehicle Access., model kit

€11.99

This 1:35 Diorama-Set Allied Vehicle Access. model kit brings military vehicle scenes closer to a field-ready look with a broad mix of stowage parts and markings. Drum cans, jerry cans, buckets, bags and canvas loads give cargo areas, fenders and hull sides the layered appearance seen on working transport and reconnaissance vehicles. The set covers several distinct accessory types rather than repeating one shape across the sprue. Alongside steel drums and cans, it includes a folded sleeping bag, duffel bag, ammunition bag, barracks bag, canvas M1936 field bag, a canvas watering bucket and canvas tops for vehicles in 3 variations. Vehicle weight plates are also provided, adding the small front-end markings often seen on allied military subjects. The leaflet shows fitting examples on a U.S. 2 1/2-ton 6x6 cargo truck and a U.S. M8 Greyhound, while noting that vehicles are not included. With an assembly time stated at 600 minutes, the kit suits a slower, detail-focused build where painting and placement shape the final result. Once finished, the accessories can be arranged as stacked supplies, strapped side loads or rear-deck stowage to give 1:35 diorama scenes a fuller operational setting.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set US Military Equipm.Mod., accessory kit

€13.19

This 1:35 Diorama-Set US Military Equipm.Mod. expands modern U.S. military displays with the field gear and supply loads often seen strapped to working vehicles. With 25 equipment types and a total of 80 pieces, the set gives static scenes a busier, more operational look across cargo decks, hull sides and parked support areas. The selection covers soft stowage and hard containers in one box: large and small ALICE packs, duffel bags, sleeping bags, sleeping mats, a folding bed, ammunition cases, jerry cans, water tanks, ration cartons and tarpaulin-style parts. CIP parts are also included for attachment to a modern utility vehicle, adding a recognizable identification detail used on current military subjects. The mix suits both support vehicles and frontline tanks, so the same set can carry one build or spread across several 1:35 projects. Assembly is required, and the stated assembly time is 600 minutes. On a finished diorama, the parts can be arranged as tightly stacked transport loads, side-mounted field gear or scattered camp equipment around a halted vehicle. The set also works as a scene-building resource for maintenance stops, convoy staging areas and deployed positions where extra cargo helps the vehicle and surroundings feel more lived in.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig-Set G. Sol.Field Brief.(5), figure set

€13.99

This 1:35 Fig-Set G. Sol.Field Brief.(5) brings a winter WWII field briefing into diorama scale with 5 figures arranged around a stove. Winter uniforms, heavy overcoats and varied body language give the scene a clear sense of pause, as if orders are being weighed before the next move across frozen ground. The set combines an officer and a noncommissioned officer studying an open map with 3 further soldiers in distinct actions: one checking his watch, one carrying an MG42 on his shoulder, and one in a squatting pose. A German shepherd figure lying down extends the scene beyond the human group, while the included newspaper and magazine add printed detail for camp or command-post settings. As an assembly kit, it leaves room for careful paintwork on fabric folds, rank details and weathered winter finishes, and the stated assembly time is 600 minutes. Placed beside a stove in a snowbound outpost, trench edge or rear-area command point, the figures create a compact focal group with a strong sense of interaction. The mix of standing and squatting poses also suits broader winter-themed dioramas where a briefing moment helps connect vehicles, structures and terrain into one coherent scene.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger.Flak 8,8 w/Motorcycle, model kit

€32.99

This 1:35 scale model kit centers on the WWII Ger.Flak 8,8 with Motorcycle and brings together a large anti-aircraft gun, a crew group and a dispatch bike in one historical build. The long 88 mm barrel, shielded gun position and wheeled carriage give the finished scene a strong silhouette, whether the model stands on its own or becomes the focal point of a larger diorama. Beyond the main gun, the set adds 9 figures in operational poses and a Zündapp KS750 motorcycle, allowing the build to show loading, spotting, command and movement around the emplacement. The cruciform base and deployed outriggers shape the gun into a firing position that reads clearly in display scenes. With a stated assembly time of 600 minutes, the kit supports a more involved project with room for careful painting and finishing across uniforms, equipment and mechanical details. Cement and paints are required separately. On a display shelf, the combination of artillery, crew and motorcycle creates a compact wartime scene with clear visual hierarchy. In a diorama setting, the figures can be arranged around the gun to suggest preparation, targeting or active deployment, while the motorcycle adds a second point of action beside the main emplacement.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Zimmerit Dekor-Satz Tiger I, decal set

€11.29

This 1:35 Zimmerit Dekor-Satz Tiger I adds the distinctive anti-magnetic coating texture to Tiger I builds with a pre-cut sticker sheet made for painting over. Instead of shaping Zimmerit from putty across large hull and turret surfaces, the sheet transfers the ridged pattern quickly and keeps the texture consistent across the model. The set is designed for Item 35194 German Tiger I Mid Production and Item 35146 German Tiger I Late Production. The sheet covers the characteristic coated areas on the hull and turret and supports 2 different turret-side pattern styles, matching the variation seen on these vehicles. The stickers are cut to fit around raised details and openings, so ports, fittings and other surface features can remain defined rather than buried under hand-applied filler. Assembly is required, and the stated assembly time is 600 minutes. During the finishing stage, the textured sections are applied before accessory parts are attached to the hull, then painted as part of the overall exterior. That workflow suits builders aiming for a more historically specific Tiger I appearance while keeping the surface treatment controlled and repeatable across the build.

Model car kits 1:24

1:6 Braided Hose 2mm Outer Dia, model accessory

€5.89

This 1:6 braided hose brings a crisp mechanical finish to scale model work, with a 2 mm outer diameter that suits visible line runs where fine detail matters. The silver braided surface and black end tips create a technical look that stands out on exposed sections, whether the hose is used to suggest piping, shielding or cable routing on a display build. Its woven sleeve structure allows the hose to follow curves and compact spaces more naturally than a rigid part, which helps when shaping detail around bodywork, interior sections or engine-area layouts. The assembly kit format makes it useful for customisation, replacement work and added realism on larger scale subjects. With 600 minutes stated for assembly time, this accessory fits projects where careful placement and finishing are part of the build itself. On workshop-style dioramas, race-inspired builds or detailed shelf models, the hose can be used to break up smooth surfaces with a more engineered visual note. It also supports cleaner transitions between components, giving hand-finished builds a more complete and deliberate appearance.

On-road RC cars (2WD/4WD)

1:10 Citroen 2CV Charleston, RC assembly kit

€144.99

This 1:10 RC assembly kit captures the Citroen 2CV Charleston in the distinctive 1982 model year form, pairing its rounded bodywork with the compact M-05 front-wheel-drive chassis. The lightweight polycarbonate shell gives the classic silhouette a clean, crisp presence on the track, while separate molded parts recreate details such as the front bumper support, headlights and side mirrors. The M-05 chassis uses a monocoque structure and a 239 mm wheelbase, with the motor, battery pack, receiver, servo and ESC arranged for balanced weight distribution and a low center of gravity. A 3-piece steering linkage works with 4-wheel independent double wishbone suspension to support stable cornering, and tread-patterned radial tires with inserts sit on 11-spoke wheels in gun metal color. The included ESC is compatible with brushed and sensor-based brushless motors, and the set also comes with a 540-type motor for the drive system. Hop-Up Option parts are available for the M-05 platform for further chassis tuning. On a smooth indoor surface or a paved outdoor run, the compact front-wheel-drive layout gives the model a direct, lively character that suits repeated laps and careful line placement through tighter sections. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 MB G-Class G500, RC assembly kit, CC-02

€294.99

The 1:10 MB G-Class G500 RC assembly kit pairs the upright presence of the 2018 G-Class with the trail-focused CC-02 platform. Its polycarbonate body captures the square proportions of the full-size vehicle, and the separate front grille, side mirrors and spare wheel cover give the shell more defined exterior detail when the model is finished. At 455 mm long, 196 mm wide and 207 mm high, the model has a substantial stance, while the 267 mm wheelbase supports balanced proportions on the chassis. The 4WD drivetrain places the motor longitudinally behind the front axle and uses a separated gearbox and transfer case with propeller shafts to drive the front and rear differential gears. Tuning options go further with 20 possible gear ratios from 11.09:1 to 29.28:1 when separately sold pinion gears are used. LED attachment parts are included, and the TLU-01 LED Light Unit with LEDs is included for export only. On rocks, dirt tracks and uneven trail sections, the front and rear rigid suspension layout gives the model the kind of axle movement that suits technical off-road driving. The finished G-Class body also brings strong display presence between runs, with its upright roofline, wide arches and rear spare wheel cover standing out clearly on a shelf or workbench. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 Neo Scorcher, RC assembly kit, TT-02B

€149.99

Neo Scorcher brings late-1980s buggy style back onto the TT-02B platform with a polycarbonate body, a large rear wing and shaft-driven 4WD. At 380 mm long, 250 mm wide and 145 mm high, the 1:10 layout gives the buggy a broad off-road stance that looks purposeful on the bench and reads clearly once the body and markings are in place. The TT-02B chassis uses a 266 mm wheelbase, a 217 mm front tread and a 208 mm rear tread, shaping the buggy's balance through turns and over uneven ground. Front and rear 4-bevel resin differentials support smooth power delivery, while the 3-piece steering tie-rod manages front-end response with a simple, direct layout. A Type 540 motor and the kit-included pinion gear produce a 10.71:1 gear ratio. Sealed front and rear gearboxes help keep dust away from the drivetrain, and the top section can be removed by loosening 4 screws for access during maintenance. On a dirt track, hard-packed path or loose gravel section, the long-arm suspension and off-road tyre setup give the buggy the mechanical travel needed for repeated runs. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Plasma Edge II, RC buggy kit, TT-02B 4WD

€149.99

The 1:10 Plasma Edge II pairs a low, race-inspired buggy body with the TT-02B 4WD chassis for fast off-road driving and a focused assembly project. Fluorescent yellow star-dish wheels, square spike tires and the updated body graphics give the model a bright competition look that stands out on dirt, gravel and hard-packed ground. The TT-02B layout develops the TT-02 platform into buggy form with longer suspension arms, buggy bumpers and a chassis tub that carries the battery lengthwise. The R/C mechanism sits flat in the frame, a layout that helps keep mass low and centered through direction changes. White CVA shock units support the double wishbone suspension at all 4 corners, while motor cooling ducts and a receiver case add useful chassis detail around the running gear. The set also comes with stickers for the body and masking stickers for painting preparation, supporting a clean finish on the polycarbonate shell. In the workshop, the detailed illustrated assembly instructions guide the build from chassis to body fitment. On the ground, the combination of 4WD traction, differential-equipped front and rear gearboxes, and square spike tires suits loose surfaces where the buggy can accelerate, turn and settle back into line with confidence. Electronic speed controller, 540 electric motor, polycarbonate body and kit parts are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Hornet by Jun Watanabe, RC buggy

€144.99

The Hornet by Jun Watanabe takes the familiar 1:10 RC buggy format and gives it a striking fashion-led finish. The white bodyshell carries oversized black polka dots, while pink front wheels, purple chassis parts and pink to purple side graphics create a look that reads clearly even at speed across open ground. The studio details show a buggy built around classic off-road cues rather than a closed touring shape. An enclosed cockpit with driver figure, a front bumper bar and a large rear wing define the silhouette, while the black windshield frame and round white front lights sharpen the contrast across the body. Rear paddle tyres indicate a setup aimed at loose terrain such as sand, where the tread can dig in and help the driven axle find traction. Visible coil-over shocks and exposed suspension arms underline the mechanical layout and keep the chassis character on show instead of hiding it under bodywork. This version suits shelf display as strongly as running sessions, because the graphic treatment stays readable from a distance and the color blocking picks out the buggy lines from every angle. Radio gear, a battery pack and a charger are required separately.

Model motorcycle kits 1:12

1:12 Ducati Superleggera V4, motorcycle model kit

€55.99

This 1:12 motorcycle model kit brings the Ducati Superleggera V4 into a compact display format with sharp superbike proportions, a 176 mm overall length and a 98 mm height. Set on the included racing stand, the finished model stretches to 198 mm and takes on the poised look of a machine prepared for the pit lane. The build focuses on the motorcycle's distinctive structure as much as its bodywork. The V4 engine sits within the frame as a separate screw-attached assembly, joined by the swing arm and front fork to give the model a layered mechanical layout. Side cowlings and the fuel tank can be removed after assembly, leaving the internal detail visible when the model is on display. Front and rear brake rotors feature hole detail, and the chain uses separate right and left sections to reproduce the look of individual rollers. Metal transfers give the mirrors a brighter reflective finish, while decals add the subtle red gradation and carbon fiber pattern seen on the side cowlings. On a shelf, desk or display case, the model reads clearly from multiple angles thanks to the front wing shapes, exposed chassis areas and race-bike stance. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CB 750F Custom Tuned, model kit

€27.49

The 1:12 Honda CB 750F Custom Tuned model kit turns a classic motorcycle shape into a focused scale build with a long, detailed assembly process. Over 600 minutes, the assembly kit develops from individual parts into a road-bike replica with a compact display footprint and the visual balance that makes 1:12 motorcycle subjects so appealing on a shelf or desk. The subject matter brings together several standout details from the full-size machine: a round front headlight, a black seat, alloy-style wheels, dual rear shocks, mirrors, handlebars and an exposed multi-cylinder engine layout. Blue striping across the white and silver bodywork adds contrast to the tuned street-bike look, while the black exhaust system gives the lower section a darker visual line. Paints are required separately for the finish, and the colour guidance in the data covers flat, gloss and metallic tones as well as clear orange and clear red for small lighting details. This model suits hobby sessions that focus on careful trimming, painting and final display rather than quick assembly. Once completed, the Honda CB 750F Custom Tuned works well as a standalone motorcycle model or as part of a broader 1:12 collection with other road and racing machines.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZF-R1, motorcycle model kit

€33.99

This 1:12 motorcycle model kit captures the Yamaha YZF-R1 with the compact, aggressive form that made the 1997 machine stand out at its debut. Full fairings, a stepped seat, side mirrors, twin headlight area and the distinctive supersport silhouette come together in a display build that keeps the bike's road-focused character clear from every angle. The assembly breaks the machine into recognizable mechanical sections, including the engine, frame, radiator, front fork, front wheel and steering controls. A display stand is part of the kit, and the engine build uses cut vinyl tubing to represent hose runs with measured sections such as 27 mm and 14 mm. Further tubing lengths of 15 mm, 39 mm, 41 mm and 45 mm appear through the frame and handlebar area, giving the finished model a more convincing technical layout. The front tire is assembled with a marked rotation direction, and the upper cowl, headlights and mirrors complete the bike's sharply defined front end. Assembly time is stated as 600 minutes. The finished motorcycle suits shelf display, hobby work sessions and careful paint finishing. Assembly kit contents are included, while paints, cement and tools are required separately. With 4 decal sets for debut and 1999 versions, the build supports different Yamaha YZF-R1 looks while keeping the same 1:12 scale presence.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Calsonic Skyline GT-R (R34), model kit

€28.99

This 1:24 scale Calsonic Skyline GT-R (R34) model kit brings the shape of Nissan's 1999 GT machine to the workbench with a low, compact body, a large curved rear wing and race-car proportions that stand out clearly once assembled. The bright blue Calsonic livery and number 12 markings give the finished car the unmistakable look of a Japanese GT contender. The bodywork reflects the R34 race car described in the kit background, including the compact form developed from the production model and the competition-focused aerodynamic treatment. Clear window parts open the view to cockpit detail, where the roll cage adds another layer of motorsport character. Rubber tyres and separate wheel parts give the completed model a planted stance, while the decal sheet supplies sponsor markings and fine visual accents that sharpen the race-day appearance. Assembly time is stated as 600 minutes. Cement and paints are required separately. On a shelf, in a display case or alongside other 1:24 motorsport builds, the finished Calsonic Skyline GT-R (R34) brings strong period racing identity through its blue bodywork, white wheels and dense sponsor graphics. During the build, trimming parts from the sprues, applying decals and painting the body panels create a focused static model project with plenty of detail to refine.

Model car kits 1:24

1:24 Honda Prelude XX, plastic model kit

This 1:24 plastic model assembly kit brings the Honda Prelude XX into a compact 180 x 82 x 53 mm format, translating the coupe's low, aerodynamic profile into a build with crisp proportions and a strong road-car character. The finished shape reflects the distinctive lines of the second-generation Prelude, from the nose to the cabin and rear deck. The bodywork is supported by shaped interior, suspension and chassis components, giving the build substance beyond the outer shell. Updated decals add model-specific detail to front and rear emblems, the head cover logo, speakers and wheel center emblems, so the finished car carries finer period-correct markings across multiple areas. A transparent windshield part replaces the earlier transparent brown version, changing the look of the glazing and sharpening the visual balance of the front section. The instructions show 2 paint approaches: red, or a two-tone scheme in navy blue and light gun metallic. The instruction manual uses Japanese and English text. On the bench, the separate chassis and interior sections support a measured, step-by-step build, while the decal placement and paint choices give the model a distinctly early-1980s road-car finish. Once completed, the 1:24 scale size sits neatly on a shelf or in a display case without demanding much space.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mazda RX-7 R1, plastic model kit

€25.99

The 1:24 Mazda RX-7 R1 captures the compact proportions, curved bodywork and prominent rear wing of Mazda's rotary sports coupe in a static display model kit. During the build, the body, chassis and interior come together as separate assemblies, creating a finished car with visible structure from the engine bay to the cabin. The kit goes beyond an outer shell by guiding the assembly of a multi-part engine that is installed into the front bay, followed by a support strut across the compartment. Front suspension, rear suspension, uprights and wheel installation are handled in dedicated stages, which gives the underside and running gear their own defined detail. Inside, the dashboard, steering area, center console and seats are assembled before the interior tub is fitted into the body. Clear window parts are installed from the inside, and rear body sections add the taillight panel, spoiler and trim pieces that shape the final silhouette. This layout suits builders who enjoy painting and finishing as part of the project, with callouts for body color, interior variations, trim details and metallic effects across the assembly sequence. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.

Model car kits 1:24

1:24 Porsche 959, sports car model kit

€25.49

The 1:24 Porsche 959 model kit brings one of the defining super sports cars of the 1980s into a full display build with detailed bodywork, mechanical sections and a realistic road-car layout. Its low silhouette, wide rear haunches and large rear wing give the finished model a strong presence, while the 1:24 scale keeps the build substantial enough for fine exterior and chassis detail. This assembly kit is built as a non-powered display model and is supplied as an unbuilt set. The build centers on more than the outer shell alone: the kit data points to engine detail, undersurface detailing, suspension features and a modeled interior, giving the construction process several distinct stages across the chassis and body. Steerable front wheels add a functional touch to the completed car, and separate wheels, tyres and transparent parts help define the finished look. Assembly time is stated as 600 minutes. Paints, plastic cement and tools are required separately. On the bench, the Porsche 959 offers a measured, technical build with room for careful painting, trim work and decal placement. Once completed, the model suits display from multiple angles, whether the focus is the aerodynamic profile, the rear wing, the cockpit area or the detailed underside that reflects the engineering character of the original car.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru Impreza WRC 98, plastic model kit

€26.99

The 1:24 Subaru Impreza WRC 98 plastic model kit brings late-1990s rally character to the workbench with a compact competition body, bold WRC styling and the visual punch of the Monte-Carlo specification. In the finished build, the blue bodywork, yellow graphics, gold wheels and clustered front auxiliary lamps create the unmistakable look of a stage car prepared for low-visibility rally sections. This assembly kit is supplied as an unbuilt model and calls for a full build process over 600 minutes. The source material highlights exterior details such as the hood scoop, side mirrors, roof antennas, rear wing and racing interior, all of which help define the car's competition identity at 1:24 scale. Markings visible on the car include Subaru branding, competition number 3, McRae and Grist name graphics, plus period sponsor logos that sharpen the replica finish. Paints and cement are required separately. On the bench, the model suits careful trimming, bonding, painting and decal work, with each step adding definition to the body lines and rally equipment. Once completed, the car fits naturally into a motorsport display, especially alongside other 1:24 competition machines, where the Monte-Carlo light pod and WRC aero parts stand out immediately.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger. Weapons Inf.(24), model kit

€5.29

The 1:35 Diorama-Set Ger. Weapons Inf.(24) brings a dense spread of infantry equipment into one plastic model assembly kit, giving military diorama builders a compact way to expand figure poses, battlefield positions and support scenes. Across pistols, rifles, submachine guns, machine guns and anti-tank weapons, the set covers a wide range of armament typically carried by WWII German infantry, so a single build can supply multiple figures or strengthen a larger display with more specific field detail. Beyond the headline weapons, the parts selection reaches into scene-defining equipment such as tripods, ammo cases, holsters, magazine pouches, drum magazines, grenade carrying cases and mines. The leaflet also shows alternate assembly possibilities on selected pieces, including support-part variation on the Pz.B.39 and MG34 assemblies, plus an MG34 mounted on an anti-aircraft tripod. That added equipment changes how a position reads on the base, whether the scene calls for a moving infantry group, a prepared firing point or a resupply moment behind cover. The 600-minute assembly time reflects the amount of detail packed into the set and suits a slower, methodical build. On a 1:35 base, the finished parts can equip individual figures, fill crates and weapon racks, or break up open ground with mines and support gear. The set also works as a useful companion for military vehicles, field fortifications and static displays where loose equipment helps the scene feel more complete and historically grounded.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Ger. MG Troops, plastic model kit

€7.19

This 1:35 scale plastic model kit captures a WWII German machine gun unit in a format suited to detailed military dioramas and figure displays. The set builds 7 figures in total and centers on MG34 and MG42 machine guns, giving the scene the visual weight of a crew-served weapons team rather than a row of identical soldiers. The figure selection is arranged around 3 different gunner and loader teams, which creates more than one battlefield composition within a single kit. Some poses suit a mounted firing position, while others fit ammunition handling, support movement or command observation. A separate commander with binoculars introduces a distinct lookout role and helps break up the silhouette of the group when placed beside the gun crews. The 1:35 scale also matches a wide range of military armor and vehicle subjects, making the figures useful for expanding period scenes with infantry support. Assembly is required, with a stated assembly time of 600 minutes. Cement, tools and paints are required separately. On a display base, beside an armored vehicle or as the center of a field emplacement, the 7-figure set gives builders a compact unit with clear interaction between weapon crew, loader and commander.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. 20mm Flakvierling 38, plastic model kit

€7.79

This 1:35 scale Ger. 20mm Flakvierling 38 plastic model kit recreates the German anti-aircraft mount with a strong focus on mechanical structure and deployed presence. The finished build combines the 4-barrel gun arrangement with a detailed carriage and trailer, creating a display piece that captures both transport form and combat setup on the same subject. The model reproduces small operating features such as ammunition cartridges, handles and pedals, giving the assembly a layered look that goes beyond the main silhouette. The mount is designed so the barrels and sight can be adjusted in elevation and traverse, which adds flexibility when setting the final stance. The included Sd.Ah.52 trailer expands the scene further, because the gun can be assembled either in towing position or in firing position. Folded transport elements and the opened combat layout create two clearly different visual outcomes from the same kit. With an assembly time of 600 minutes, this kit suits builders who want a longer bench session centered on military equipment in 1:35 scale. On a shelf, in a diorama, or paired with other land or vehicle subjects of the same scale, the Flakvierling 38 brings a compact footprint and a highly technical profile defined by its carriage, shielded mount and trailer structure.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 German Panzer Grenadiers, figure model kit

€7.19

This 1:35 German Panzer Grenadiers figure model kit brings an 8 figure infantry squad into military miniature scenes with a mix of advancing, crouching, kneeling and prone poses. The set is designed for builders who want coordinated battlefield movement across a diorama, whether the figures are arranged on open ground, beside cover or alongside an armored vehicle. Uniform parts, helmets, rifles, submachine gun details, packs and field equipment give each figure a defined silhouette and a layered painting surface. The varied body positions help break up repetition in a squad display and support more natural spacing across snow, rubble, road sections or earthwork bases. As a self assembly kit, the set leaves room for individual paint choices, weathering effects and unit specific finishing. Illustrated step by step instructions are included. Glue, tools and paints are required separately. The finished figures suit static display scenes, military miniature collections and larger 1:35 compositions built around vehicles, structures or terrain accessories. Used as a group, the 8 poses can suggest covering fire, movement and coordinated advance, giving a diorama a stronger sense of direction and interaction.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Jerry Can Set, plastic model assembly kit

€5.49

This 1:35 plastic model assembly kit adds military supply detail to diorama scenes with jerry cans and barrels that give vehicles, figures and ground layouts a more worked-in look. The set suits builders shaping depot corners, refuelling points or cargo areas where containers help explain what is happening in the scene. Inside the kit are 9 U.S. type jerry cans, 9 German type jerry cans, and 6 barrels split into 3 new and 3 dented versions. That mix supports visual contrast across the same display, with cleaner containers for organised storage and dented pieces for harder-used positions near transport or service activity. The 1:35 scale keeps the accessories in step with military vehicles, figures and terrain pieces built to the same proportion. Assembly is required, and the stated assembly time is 600 minutes. Placed on AFVs, stacked beside figures or arranged around a service area, the containers help turn open ground into a scene with purpose. A few cans can suggest active loading, while grouped barrels can define a supply point or maintenance zone without overwhelming the main vehicle or figure focus.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Tank Ammo Load Crew, figure set, WWII scene

€12.29

This 1:35 figure set captures a focused tank resupply moment with 4 German crew figures, separate shells and wooden ammunition cases arranged for a WWII loading scene. Different poses show the handling sequence around the vehicle, so the finished display reads as active work rather than a static lineup. The set is designed as an assembly kit and gives a diorama more than standing figures alone. Open and closed cases create supply points on the ground, while loose ammunition parts help define where the next round is being lifted, carried or passed forward. That combination supports more layered placement around hatches, fenders or a supply area beside the tank. The 600-minute assembly time points to a detailed build suited to careful painting and scene planning. Instructions are included, and paints are required separately. On a display base, the figures can be arranged close together for a compact loading team or spread around a vehicle to suggest the wider flow of ammunition handling. The ammunition cases also work as authentic accessories with 1:35 Tiger I, King Tiger, Panther and Pz.Kpfw. IV tank models, making the set useful both as a complete scene starter and as a detail upgrade for an existing armored build.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M16 Half Track, plastic model kit

€21.99

This 1:35 plastic model kit recreates the U.S. Multiple Gun Motor Carriage M16 as a compact 189 mm military vehicle with a strong anti-aircraft profile and a dense, mechanical rear fighting compartment. The finished form combines the familiar half-track layout with a quadruple 12.7 mm Browning installation, giving the build a layered silhouette that stands out in a collection or diorama. The rear gun assembly is more than a static shape: after assembly, it rotates 360 degrees, and the gun sight moves together with the guns to mirror the mechanism of the full-size vehicle. That linked movement adds a hands-on element to the completed model and gives the mount a convincing sense of function when posed at different angles. The chassis ladder frame is reproduced beneath the body, while the interior adds further structure inside the vehicle, supporting a more realistic look through open areas and from close viewing distance. Three figures are included to build a focused crew scene: a driver, a radio operator and a gunner adjusting his aim at approaching enemy aircraft. Set on a shelf, placed into a wartime display, or combined with terrain elements, the M16 brings together vehicle detail, articulated gun action and figure-based storytelling in one military modelling subject.

Military model vehicles 1:35

1:35 US M21 Halftrack, plastic model assembly kit

€21.99

This 1:35 scale plastic model assembly kit captures the US M21 Halftrack in a compact 183 mm format that still leaves room for strong visual presence. The blocky body shape is rendered with the open-top fighting compartment and the driver's station clearly defined, so the finished model carries the purposeful look of the original vehicle whether placed on a shelf or worked into a diorama. Beyond the outer form, the kit adds interest through a realistic depiction of the complex front-wheel drive chassis, giving the underside and running layout meaningful structure during assembly. The set also contains an 81 mm mortar, a bazooka, sheets and further accessories that help build a fuller field scene around the vehicle. A driver figure and 3 mortar team figures bring human scale to the model and support more specific placement choices, from a halted support vehicle to an active firing position. On the workbench, the combination of vehicle, crew and equipment opens up painting and finishing decisions across uniforms, stowage and mechanical details. In a display setting, the halftrack, mortar team and accessories create a compact wartime scene with clear action and depth without needing a large footprint.

Military figures & Accessories 1:35

1:35/1:16 WWII Figure Insignia Decal Set

€10.49

This decal set brings sharper uniform detail to 1:35 and 1:16 WWII figure builds with a wide range of German military insignia, rank markings and badges. Applied to painted figures, the markings add crisp visual definition to collars, sleeves, shoulders and chest areas, helping small-scale uniforms read more clearly in close-up display scenes. The sheet covers 2 scales in one set, making it useful across different military figure projects without switching to separate marking packs. Numbered groups on the sheet help identify the different insignia types during finishing work, which keeps decoration steps more orderly on complex uniforms. Cartograf printing supports fine edges and legible small markings where painted detail alone can be difficult to keep consistent. The assortment shown includes shoulder boards, collar tabs, cuff titles, breast eagles, sleeve chevrons, stripes, shields, badges, medals and unit insignia. On a single figure, these markings can define rank, branch and uniform placement with more precision than hand painting alone. In a larger diorama or display lineup, the mix of insignia helps differentiate multiple figures while keeping scale detail consistent across the scene. Assembly time is stated as 600 minutes, and the set is supplied as an assembly kit.  Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 Yamato, battleship model kit, new tooling

€289.99

This 1:350 Yamato battleship model kit brings the famous WWII warship into a large-format build with new tooling and detail updates drawn from the latest historical research. At 752 mm in length, the assembled ship has the presence to show the revised foredeck, hull sides and stern clearly, whether displayed as a full-hull model or in waterline form. The kit depicts Yamato with the increased anti-aircraft armament of her final mission to Okinawa. Reconnaissance seaplanes and various small boats carried on the ship are included, adding activity and scale reference across the deck layout. Main gun turrets feature interior sections and turret mount detail below deck level, while secondary armament and both 12.7 mm and 25 mm AA gun mounts can be positioned with rotation and elevation. Elastomer parts are used for the canvas covers at the base of the main guns and for sand bags at AA positions, giving these shapes a more natural look. Two sheets of photo-etched parts add finer detail for elements such as ladders and cranes. The build suits careful painting and finishing, with about 90% of deck sections molded separately to keep major surfaces and fittings distinct during assembly. A 600-minute assembly time supports a longer bench session centered on structure, armament and deck equipment. Paints and cement are required separately.

Model aircraft kits 1:48

1:48 Messerschmitt Bf109E-4/7 Trop, aircraft model kit

€28.99

This 1:48 scale aircraft model kit captures the Messerschmitt Bf109E-4/7 Trop with the sharp, angular form that defined the Luftwaffe fighter in the early stages of WWII. The finished model measures 207 mm in wingspan and 185 mm in fuselage length, giving the aircraft a compact footprint while preserving the proportions that make the Bf 109 instantly recognizable. The kit depicts the E-4 version produced from May 1940 and also reflects the E-7 configuration, which used a drop tank for increased range. Specific Trop details include the air intake with sand filter, a feature associated with desert operations. The canopy may be built in an open or closed position, which changes how the cockpit area is presented on the completed aircraft. One pilot figure is included for the cockpit, and 3 marking options allow different finishing directions across the same airframe. On a shelf, in a display cabinet, or as part of a WWII aviation lineup, the model brings a clear historical aircraft profile into view. Assembly takes 600 minutes. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 2002 Mercedes-Benz CLK AMG, RC assembly kit

This 1:10 RC assembly kit recreates the 2002 Mercedes-Benz CLK AMG with the long, low stance of the racing-based coupe and dimensions of 444 x 185 x 125 mm. The 257 mm wheelbase gives the shell the proportions used by the TT-02 platform, so the finished car carries the wide-fender silhouette and rear aero profile with a convincing on-road presence. The body is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, adding extra definition beyond the main shell. Stickers and masking stickers are supplied for the paint job, supporting window masking and exterior markings during finishing. The kit includes the TT-02 chassis, a Type 540 Torque-Tuned motor and an ESC, combining shaft-driven 4WD with a layout widely used for electric touring builds. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor hall floor or a clean stretch of asphalt, the slick-tire setup and 4WD layout suit controlled laps and steady corner entry. Between running sessions, the body finishing process, mirror fitment and wing installation give the model a detailed workshop character that continues after the chassis is built.

On-road RC cars (2WD/4WD)

1:10 Audi quattro A2, RC assembly kit, TT-02

€154.99

The 1:10 Audi quattro A2 RC assembly kit pairs a classic rally silhouette with the TT-02 platform, creating a build that looks purposeful on the bench and tracks cleanly on paved surfaces. At 458 mm long and 187 mm wide, the finished car carries the wide-arched proportions, rear wing and period body lines of the quattro A2 in a clear polycarbonate bodyshell. Separate ABS parts add definition to the front and rear light cases, fog lamps, side mirrors and wing details, while silver 5-spoke wheels match the competition look. The main headlight buckets can be fitted with separately sold LEDs, adding another layer of scale realism to evening display or running sessions. Under the shell, 4-bevel differential gears and double wishbone suspension help the chassis deliver smooth cornering response. The TT-02 layout is known for its adaptable design, and the 257 mm wheelbase suits the body proportions closely. This kit suits builders who want the hands-on process of trimming, painting and finishing a rally car body before taking it onto smooth ground for RC driving. Radio gear, a battery pack, a charger and paints are required separately. Optional TT-02 tuning parts are also available for those who want to refine the setup further after the first runs.

On-road RC cars (2WD/4WD)

1:10 BMW M3 GT2 2009, RC assembly kit, TT-01E

€174.99

The 1:10 BMW M3 GT2 2009 RC assembly kit brings the race-bred shape of the 2009 GT2 machine into a detailed build with running performance to match. Its polycarbonate body captures the low, wide touring car silhouette, while the included LED light set adds a striking visual effect when the finished model heads onto smooth indoor or outdoor surfaces. At the center of the build is the TT-01E platform, a shaft-driven 4WD chassis with a low-profile bathtub frame. The 452 mm length, 188 mm width, 132 mm height and 257 mm wheelbase give the model the proportions of a full touring car, while the chassis layout keeps key mass low in the frame. Double wishbone suspension supports the running setup, and updated markings with masking stickers help complete the 2009 BMW M3 GT2 look with crisp body detailing. An electronic speed controller and Type 540 Torque-Tuned motor are included. Radio gear, a battery pack, a charger and paints are required separately. This assembly kit suits hobby sessions that combine chassis building, body finishing and on-road RC driving in one focused project. Once completed, the model fits track-style laps, car-park runs and shelf display between driving sessions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Kadett GT/E Rally, RC assembly kit

€179.99

The 1:10 Opel Kadett GT/E Rally RC assembly kit combines classic rally bodywork with the adaptable MB-01 chassis, creating a build that balances scale character and chassis tuning. The painted bodyshell, number 16 markings and 4 auxiliary front spotlights give the coupe a clear period competition presence while the compact platform keeps the mechanical layout visible and accessible during assembly. The MB-01 platform allows 3 wheelbase choices of 210 mm, 225 mm and 239 mm by changing the joint section between the lower deck and sub deck. Steering linkage length changes with the selected wheelbase, with the manual showing 84 mm settings for MR S and MR M plus an 87 mm setting for MR L. The chassis also allows a change between FF and MR layouts by reversing the differential unit direction, and that conversion calls for corresponding rebound screw settings of 1.0 mm at the front and 2.5 mm at the rear. In MR form, a high motor position can also be selected, and the electronics positions change accordingly. This assembly kit suits builders who enjoy adjusting layout as well as body style, whether the focus is shelf display between runs or testing different chassis configurations on a low-grip surface. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 (992), RC assembly kit, TT-02

€159.99

The Porsche 911 GT3 (992) arrives here as a 1:10 R/C model assembly kit with the low, wide stance and track-focused shape of the road car translated into a detailed polycarbonate shell. At 467 mm long, 188 mm wide and 131 mm high, the body gives the chassis a planted on-road profile, while the separate polycarbonate rear wing and light cases add extra depth to the finished exterior. Under the shell, the model uses the TT-02 platform with shaft-driven 4WD and a 251 mm S-size wheelbase. That layout keeps the driveline direct and leaves room for the adaptable chassis design that has made the TT-02 a long-running choice for touring car builds. A Type 540 Torque-Tuned motor and included ESC complete the drive package named in the kit contents. The body set also uses separate black molded parts for the side mirrors and wing stays, plus a Urethane Bumper L compatible with TT-01 and TGS applications. This assembly kit suits bench building, body finishing and on-road driving as distinct parts of the hobby. Stickers and masking stickers support the paint process and exterior markings, while radio gear, a battery pack, a charger and paints are required separately before the chassis can run.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€169.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 RC assembly kit with the low, wide stance and track-focused shape of the full-size race car translated into a detailed polycarbonate bodyshell. At about 479 mm long, 188 mm wide and 127 mm high, the model carries strong visual presence on the bench and on the circuit, with a separate polycarbonate rear wing and separate light cases sharpening the finished outline. Under the body, the shaft-driven 4WD TT-02 chassis uses a short 251 mm wheelbase and a layout known for straightforward adaptability. Black molded parts depict the side mirrors and wing stays, adding crisp contrast against the painted shell. Black 10-spoke wheels and slick tires complete the GT race look with a setup suited to smooth surfaces. The kit also includes stickers and masking stickers for the paint job, plus a urethane bumper to help keep the body in good condition during use. The result suits measured assembly sessions as much as running time, with each stage adding visible race-car detail before the chassis takes to the floor. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S Tricolore, model kit

€53.99

This 1:12 scale model assembly kit captures the Ducati 1199 Panigale S Tricolore with its unmistakable red, white and green bodywork, turning a landmark superbike into a detailed bench project and a striking display piece. The Tricolore edition commemorates the 150th anniversary of Italian reunification, and that context gives the finished motorcycle a specific visual identity beyond a standard race-replica finish. The original machine's 1,198cc L-Twin engine is integrated into a monocoque frame, and that layout is carried into the model with closely observed structural detail. After assembly, the screw-fixed side cowls can be taken off again, making the inner construction visible without altering the outer shape of the bike. The rear suspension uses a metal coil spring, adding a distinct mechanical element to the damper area. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. On a shelf, desk or display case, the included racing stand holds the motorcycle upright and gives the finished build the stance of a paddock presentation. Cartograf decals supply the fine markings for fairings, logos, instrument details and trim, supporting an accurate finish whether the model is displayed with the bodywork in place or with the inner engineering on view.

Model motorcycle kits 1:12

1:12 Ducati 888 Superbike '93, plastic model kit

€34.99

The 1:12 Ducati 888 Superbike '93 assembly kit brings a classic racing motorcycle into a focused scale build with a compact display footprint and the distinctive lines of a full-faired superbike. In this format, the single seat, low front profile and race body shape come together as a model that suits careful painting, decal work and clean final presentation. This plastic model kit is built around the Ducati 888 Superbike '93 designation and a 1:12 scale that gives small details enough presence without demanding a large display area. The build is intended as an assembly project, with 600 minutes stated for completion, making it a substantial bench session rather than a quick snap-together task. The source material behind the subject adds motorsport context from the 1993 season, linking the finished motorcycle to period superbike racing. Paints and tools are required separately. On the work surface, the project suits steady step-by-step progress, from preparing parts to painting body panels and applying the final markings. Once completed, the model sits naturally in a display setting where the fairing shape, wheel layout and racing stance can be viewed from multiple angles.

Model motorcycle kits 1:12

1:12 Honda CB750F, motorcycle model kit

€24.99

This 1:12 motorcycle model kit recreates the Honda CB750F with the low handlebar stance, rear-set footrest layout and smooth line from fuel tank to tail that defined the road bike's early-1980s character. The finished display combines classic naked-bike proportions with visible mechanical structure, so the machine reads clearly from every angle on a shelf or workbench. The build centers on a detailed inline 4 engine made up of cylinder, carburettor and crankcase assemblies, with vinyl tubing sections cut to 1.5 cm, 2 cm, 2.5 cm, 4 cm, 4.5 cm, 5 cm, 8.5 cm and 9.5 cm for realistic routing across the frame and engine area. Front and rear tyres, 1.6 mm x 20 screws, 1.6 mm x 5 screws and a 50 cm vinyl tubing length are included in the kit contents. The bodywork can be finished in silver, red or black, and the decal sheet provides the matching striping sets for each body colour. Paints are required separately. Assembly unfolds across the engine, swing arm, mufflers, front fork, rear fender and fuel tank, giving each stage its own visual milestone as the motorcycle takes shape. On a display shelf, the chrome-look exhausts, disc brake layout, cast wheels and compact four-cylinder form create a strong period road-bike presence that suits classic motorcycle collections.

Model motorcycle kits 1:12

1:12 Honda Monkey 125, motorcycle model kit

€36.49

The 1:12 Honda Monkey 125 motorcycle model kit brings the compact look of Honda's modern minibike into a scale build with crisp proportions and a finished size of 142 mm x 63 mm x 86 mm. Its small footprint and rounded styling cues give the completed motorcycle a lively display presence, from the headlight and speedometer area to the short wheelbase silhouette that made the Monkey line widely recognized. This assembly kit recreates the 2018-era Monkey 125 with a detailed 124 cc engine appearance, chunky tires and bright plated exterior trim. The fenders and light cases use metal-plated parts to capture the gleam of the full-size machine, while clear parts handle lens details with sharper definition. Damper springs and vinyl tubing add mechanical depth to visible lines and suspension areas, and decals supply the markings that complete the finish. Engine, swing arm, front fork and rear fender sections are secured to the frame with screws, giving these structural areas a firm connection during assembly. On the bench, the varied materials and small mechanical details create a focused motorcycle build with painting and finishing work across body, engine and trim sections. Once completed, the model suits shelf display, diorama placement or close-up viewing where the Monkey 125's cheerful shape, chrome accents and thick tire profile stand out from every angle.

Model motorcycle kits 1:12

1:12 Honda NSR 500 Factory-Color, motorcycle model kit

€21.99

The 1:12 Honda NSR 500 Factory-Color motorcycle model kit brings Grand Prix racing character to the workbench through a full-fairing race bike finished in Honda factory livery. Red, white and blue panels, the number 3 race markings and period sponsor graphics shape a machine that looks ready for the paddock stand between sessions. The assembly kit format focuses attention on the motorcycle's racing structure rather than on a simplified silhouette. A tinted windscreen sits above the front fairing, while the front disc brake, chain drive and dual rear exhausts add the mechanical detail that gives this model its competition identity. White wheels contrast with the black seat and help the bodywork stand out once the decals are in place. Visible frame and suspension areas add depth around the fairing and tail section, so the finished build reads convincingly from more than one angle. With a stated assembly time of 600 minutes, this kit suits longer bench sessions where subassemblies, paintwork and markings can be handled with care. The finished motorcycle works well as a display piece on a shelf, in a motorsport collection or alongside other scale racing machines with a similar era and theme.

Model motorcycle kits 1:12

1:12 Honda RS1000, scale model kit

€33.99

The Honda RS1000 Endurance Racer arrives as a 1:12 scale model kit that brings a classic racing motorcycle into a focused build with clear display appeal. The long fairing, low riding position and endurance-racing silhouette give the finished machine a purposeful look that stands out on a shelf, desk or in a collection cabinet. This kit centers on the motorcycle itself rather than on extra accessories, keeping attention on the RS1000 form and the proportions that define this racing machine. The 1:12 scale offers enough presence to make the body shape and overall stance easy to appreciate once assembled. As a model kit, the hands-on process is the core of the experience, with each stage contributing to a finished replica that reflects the character of the original Honda racer. The racing theme also makes this a strong fit alongside other scale motorcycles and motorsport subjects. On a worktable, the build suits steady, detail-focused sessions where the shape of the fairing and the stretched race layout gradually take form. Once completed, the model works equally well as a standalone display motorcycle or as part of a broader two-wheel racing lineup.

Off-road RC cars

1:12 Lunch Box Black Edition, RC kit, 2WD

€164.99

The 1:12 Lunch Box Black Edition brings custom van styling and RC wheelie action together in a compact kit with a 385 mm length, 290 mm width and 207 mm wheelbase. Its raised stance, oversized proportions and black-finished body create a bold silhouette that stands out on tarmac, packed dirt and short grass. This reissue traces back to the original 1987 Lunch Box and keeps the playful monster-van character that made the design memorable. The Black Edition uses a black-coloured ABS body with matching black rims, while chrome-plated parts on the radiator grille and bumper sharpen the contrast at the front end. A wheelie bar sits at the rear to support repeated lift under acceleration, and the lighting preparation leaves room for a more detailed build. The kit format also suits builders who enjoy fitting and finishing the shell before the first run. On open ground, the short wheelbase and tall tyre format give the model a lively attitude in tight turns and quick throttle inputs. Car park sessions, club meetups and casual weekend running all suit the Lunch Box Black Edition well. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha XV1000 Virago, motorcycle model kit

€24.49

The 1:12 Yamaha XV1000 Virago model kit brings the long, relaxed lines of Yamaha's cruiser into a display scale that shows off both styling and mechanical detail. The finished motorcycle combines a low 715 mm seat height, pull-back handlebars and forward foot rests from the original machine into a silhouette that reads clearly on a shelf or in a collection. The full-size XV1000 Virago used a 981 cc V-twin with 70 hp and a 32 degree front wheel caster angle, extending the wheelbase to 1525 mm for straight-running stability, and those defining traits shape the character of this kit. Visible subassemblies such as the frame, rear swing arm, shock absorbers, front fork, muffler, fuel tank and electrical equipment cover give the build a clear mechanical sequence. Decal placement and paint references guide the finish for Yamaha markings, Virago scripts, clear orange indicators, a clear red rear light and gold-toned trim over chrome-finished areas. The included assembly kit also leaves room for careful work on smaller details such as brake lines, meter cable, clutch cable and backrest parts. On the workbench, the model supports a measured build with painting, fitting and final marking as separate stages rather than a quick snap-together session. Once completed, the center stand allows the motorcycle to rest upright for display, where the V-twin engine, stepped seat, backrest and cruiser geometry remain easy to appreciate.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha YZR-M1 '04, motorcycle model kit

€40.99

The 1:12 Yamaha YZR-M1 '04 assembly kit brings a MotoGP racing motorcycle onto the workbench with the low, streamlined stance, single-seat tail and compact fairing shape of the 2004 machine. In the finished display, the red, white, black and silver livery, tinted windscreen and rear paddock stand create the look of a bike prepared for the pit lane between track sessions. The build centers on the Yamaha YZR-M1 in 1:12 scale and uses the No.7 and No.33 race markings named in the set data. Visible sponsor graphics such as Yamaha, MOTUL, Yamalube, DID and NGK add period race detail to the bodywork and help the finished motorcycle read as a specific competition machine rather than a generic sportbike. Front and rear proportions, the exposed exhaust area and the contrast between the fairing surfaces and wheel sections give painting and decal work clear focal points across the model. Assembly kit contents are listed, and the stated assembly time is 600 minutes. Paints and tools shown in the reference material are not listed as contents. On a shelf, desk or display case, the completed motorcycle sits upright on its stand and shows its racing profile cleanly from the side. At the bench, trimming parts, finishing the fairing and applying the chosen number scheme turn the model into a focused scale-building project with a strong motorsport look.

RC trucks

1:14 Scania R470 Highline, RC truck kit

€399.99

The Scania R470 Highline brings modern European tractor-truck styling into Tamiya's 1:14 RC series with a tall cab, long wheelbase proportions and a substantial 452 mm overall length. At 187 mm wide and 293 mm high, the model has the stance of a full-size long-haul machine, whether it is parked on display or moving through a scale transport scene. A 272 mm wheelbase sets the chassis layout, while front and rear tread measurements of 156 mm and 138 mm shape the truck's planted look on the road. The tyres measure 22 mm in width at both ends, with an 83 mm diameter front and rear, matching the heavy commercial character of the subject. The 3-speed transmission adds a mechanical layer to the build, with gear ratios of 32.49:1 in 1st, 17.76:1 in 2nd and 10.66:1 in 3rd. Fully equipped weight is about 3.1 kg without multi function unit. As a kit, this model suits builders who enjoy working through a detailed truck platform and then using the finished machine with compatible trailers in a scale haulage setting. The Highline cab shape, realistic dimensions and multi-gear drivetrain give the finished truck a convincing presence during coupling, manoeuvring and road running.  Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 WWII German Machine Gunner, plastic model kit

€18.99

This 1:16 plastic model kit captures a WWII German machine gunner in a greatcoat, carrying an MG42 over the shoulder in a steady marching pose. Separate coat sections shape the wider collar and lower hems, giving the uniform more depth and a clearer layered look once assembled. The figure belongs to the 1:16 World Figure Series and is supplied as an assembly kit rather than a finished display piece. The sculpted equipment adds further definition to the build, with the gas mask case and field gear worked into the figure so the completed model reads as a full soldier loadout instead of a plain standing pose. The project is designed for assembly and painting, with a stated build time of 600 minutes. Paints, cement and tools are required separately. On a shelf, in a military display, or as part of a diorama scene, the finished figure brings vertical presence through the long coat, helmeted head and shouldered weapon. The larger 1:16 scale leaves room for careful paintwork on folds, straps and equipment edges, making the build especially suited to modelers who enjoy uniform detail and hand-finished military subjects.  Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Toyota Celica LB Turbo Gr.5, plastic model kit

€46.99

This 1:20 plastic model assembly kit captures the Toyota Celica LB Turbo Gr.5 in the dramatic proportions of a late-1970s silhouette racer. At 240 mm long, 105 mm wide and 61 mm high, the finished car brings the low nose, boxed arches and large rear wing into a display size that shows the shape clearly from every angle. The build goes beyond the outer bodywork with an authentic cockpit, roll cage and inline-4 engine layout. Removing the front cowl reveals the engine detail after assembly, so the finished model can be shown with mechanical features on view as well as with the body closed. The kit also includes a full body driver figure for the cockpit, adding a human scale reference inside the racing interior. Solid synthetic rubber slick tires complete the competition look with the broad, smooth tread style associated with circuit cars of the period. For finishing, the kit provides high quality Cartograf decals and 2 marking options to depict car no.68 or no.56. That choice lets the build lean toward 2 distinct race identities while keeping the same body and mechanical layout. Assembly time is stated as 600 minutes. Paint and cement are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Tyrrell P34 Six Wheeler, model kit

€35.49

The 1:20 Tyrrell P34 Six Wheeler model kit recreates the Monaco GP77 machine with the unusual six-wheel layout that made the original car one of Formula racing's most recognisable designs. At 201 mm long and 101 mm wide, the finished racer carries a low, stretched stance that gives the bodywork, wing elements and wheel arrangement strong visual impact on a shelf or workbench. This version depicts the 1977 Monaco GP car with the same half bonnet layout used in the previous season, while also capturing key exterior details such as the rear seat cowl, front brake air duct, anti roll bar, rear wing side plate and tail light. The Ford Cosworth DFV engine is rendered as a visible mechanical centerpiece, and the transmission and ignition add further structure around the rear section. A driver figure is included for the open cockpit, adding scale reference and a race-ready look once the build is complete. Markings in the kit allow the car to be finished as either #3 for R. Peterson or #4 for P. Depailler, giving 2 authentic Monaco GP77 identities from one box. Assembly takes about 600 minutes. The scope of delivery includes the kit, instructions and decor.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Calsonic Skyline GT-R, static display model

€28.49

The 1:24 Calsonic Skyline GT-R brings a well-known JGTC machine to the workbench as a static display model, combining the low, aggressive shape of the R33 race car with the visual impact of its full blue Calsonic livery. Large aero surfaces, competition proportions and the number 1 race markings give the finished build a strong motorsport presence on a shelf or in a display case. This assembly kit draws on the 1996 racing version of the Skyline GT-R, a car developed for the Japanese GT Car Championships with extensive aerodynamic revisions. The bodywork features additional air intakes and outlets, widened fenders and a prominent rear wing that distinguish it from the road-going base car. Decals recreate period sponsor graphics including CALSONIC, NISSAN, IMPUL and Bridgestone, while GOODYEAR markings appear on the tires in the reference artwork. The subject itself reflects a rear-wheel-drive competition car powered in period by a 2,568 cc inline 6 twin-turbo engine and a sequential 6-speed gearbox, details that add context to the model's racing form. Over an assembly time of 600 minutes, the build centers on shaping, finishing and detailing a recognizable touring car silhouette rather than motorized running functions. The completed model suits display alongside other 1:24 motorsport subjects and gives racing fans a focused way to recreate a landmark JGTC entry in miniature.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 GMA T.50, plastic model kit, gullwing hood

€62.99

The 1:24 GMA T.50 plastic model kit brings Gordon Murray Automotive's compact supercar shape into a detailed static build with a finished size of 181 mm long, 77.1 mm wide and 48.5 mm high. With the gullwing engine hood open, the height reaches 68.5 mm, creating a striking display view that frames the rear section and the V12 layout. The body uses a single upper monocoque part, while the transparent window parts attach individually without cement. Black window frame sections are integrated into that upper monocoque, which removes the need to mask and paint the window surrounds. At the rear, the large fan is backed by internal duct detail that reflects the airflow layout of the actual car. Front and rear damper spring components are molded separately from the damper parts, which helps bring out suspension detail during painting. Newly designed wheels complete the stance with a fresh, model-specific finish. On the bench, the kit offers several points of focus, from the engine bay and rear mesh sections to the clean fit of the canopy-style glazing. Once built, the model suits shelf display with the hood closed or a more technical presentation with the hood raised to show the V12 and rear aero detailing. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan Skyline GT-R V-Spec, plastic model kit

€25.49

This 1:24 plastic model kit recreates the Nissan Skyline GT-R V-Spec R33 with the long, low coupe shape, blistered front and rear fenders, and the large rear wing that defines the car's road-going performance look. The body can be finished in 1 of 7 color schemes named in the instructions, including Midnight Purple, Deep Marine Blue, White, Spark Silver, Dark Grey Pearl, Black and Super Clear Red. The build is structured through distinct subassemblies, including the rear axle, front axle, exhaust system, interior and exterior trim. The underside is not treated as a flat base alone: the instructions show separate rear suspension elements, axle shafts, exhaust routing and a front underguard, which gives the finished model more depth when viewed from low angles. Inside the cabin, the tub, seats, dashboard, steering wheel and center console are assembled as individual parts, and the dashboard receives a dedicated instrument decal. Left and right tyres use directional tread patterns, so wheel installation follows the marked rotation layout shown in the guide. Assembly is required, with a stated build time of 600 minutes. The box contains the assembly kit. Paints, cement and tools are required separately. On the bench, the sequence moves from chassis and cabin work to body fitment, then to mirrors, lamps, spoiler and markings, creating a focused car-model project with mechanical detail, trim definition and a recognisable GT-R silhouette at display scale.

Model car kits 1:24

1:24 Porsche 911 GT1 LeMans '96, plastic model kit

€35.99

This 1:24 plastic model assembly kit recreates the Porsche 911 GT1 that competed at the 1996 24 Hours of Le Mans, combining endurance-racing presence with a display format shaped for detailed bench work. The finished car carries the long, low silhouette, large rear aero surfaces and competition-focused body form that made the original machine stand out on the Le Mans grid. The kit goes beyond an exterior shell with depictions of the midship twin turbo engine, suspension and an authentic chassis undersurface, giving the build substance above and below the body. A realistic cockpit with roll cage adds depth to the interior view, while the removable rear cowl lets the rear mechanical area remain part of the display instead of disappearing under fixed bodywork. Solid synthetic rubber tires bring a distinct finish to the wheels and reinforce the race-car stance. Decals are included to recreate the factory livery shown on the 1996 car. On the workbench, the model suits careful painting, decal placement and detail finishing across the body, cockpit and underside. Once completed, the 1:24 scale format sits comfortably in a display cabinet, on a shelf or alongside other endurance-racing subjects, where the exposed rear section and detailed interior give the model more to study than a closed-body curbside build.

Model car kits 1:24

1:24 Toyota Celica GT-Four, plastic model kit

€24.99

The 1:24 Toyota Celica GT-Four captures the compact, muscular shape of the rally-bred coupe in a static display model that puts body form, surface detail and careful finishing at the center of the build. The large rear spoiler, hood intake, quad headlight layout and coupe profile give the finished car a strong road-going stance that stands out in a cabinet or on a desk. This kit is part of the 1/24 Sports Car Series No. 133 and is supplied as an assembly kit for a full build that extends well beyond the outer shell. The body is joined by a reproduced engine bay, a separate interior with dashboard, center console and seats, and clear window parts that define the glazing cleanly once fitted. The instructions also show left-hand and right-hand steering configurations, adding another layer of model-specific detail during construction. Paint guidance is extensive, with body colours and smaller trim areas called out across the build, and decals are used to complete exterior markings and finishing touches. With an assembly time of 600 minutes, the project suits measured work sessions where trimming, test fitting, painting and decal placement can each get proper attention. Plastic cement and paints are required separately. Once completed, the Celica GT-Four works equally well as a focused weekend build spread across stages or as a longer bench project built up section by section.

Model car kits 1:24

1:24 Volkswagen Beetle 1300 1966, model kit

€27.99

This 1:24 Volkswagen Beetle 1300 1966 model kit brings one of the most recognisable compact cars into a static scale build with the unmistakable rounded roofline, curved fenders and period detailing of the classic Beetle. The finished model captures the character of the 1966 version, a form widely regarded as one of the clearest expressions of the original design. The assembly kit is built around reproduced exterior and interior sections, so the shape of the cabin, body and trim develops step by step during construction. Openable front hood and rear engine lid add another layer of detail to the completed car, allowing the model to be viewed as more than a sealed silhouette on a shelf. The source vehicle was known for its platform chassis, air-cooled flat-four engine and four-wheel independent suspension, details that help define the Beetle's place in automotive history. Cement, paints and tools are required separately. On a desk, in a display cabinet or alongside other classic road car builds, the compact 1:24 format gives the Beetle a strong presence without demanding much space. The 600 minute assembly time suits a longer, steady build rhythm, with painting, fitting and finishing shaping the final look of this 1966 Volkswagen icon.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 McDonnell Douglas F-15C Eagle, model kit

€124.99

This 1:32 McDonnell Douglas F-15C Eagle model kit brings the shape of the twin-engined air superiority fighter into a large display scale that gives the airframe, tail layout and undercarriage room to stand out on the bench. The assembled aircraft captures the F-15C's distinctive configuration with twin vertical fins, a long nose section and underwing stores that build a recognisable silhouette. The kit is designed for self-assembly and uses illustrated instructions to guide each stage of the build. Decals are included for finishing work, adding visual definition once the main construction is complete. The parts can be painted to match the scheme shown or finished in a custom interpretation, which opens room for careful masking, cockpit detailing and surface treatment across the fuselage and wings. With a stated assembly time of 600 minutes, the project suits a slower, methodical build rhythm centered on fitting, painting and final presentation. On the work surface, the larger 1:32 format supports close attention to panel lines, landing gear parts and cockpit areas during construction. Once completed, the aircraft sits naturally in a display setting with the stance and proportions of the F-15C clearly visible. Tools, glue and paints are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 US Vought F4U-1D Corsair, plastic model kit

€165.00

The 1:32 US Vought F4U-1D Corsair captures the late-war D variant of the famous World War II fighter in a plastic model kit built around variant-specific detail. New parts reproduce key F4U-1D features, giving the finished aircraft the look of the carrier-cleared version used for strike and support missions. The airframe can be assembled with the gull wings extended or folded, changing the silhouette from full-span fighter to compact carrier stowage form. The kit also supports 2 display states: parked with the landing gear fitted, or airborne with the alternate strut parts and stand. Photo-etched parts add finer definition to selected areas, and the set includes both seated and standing pilot figures to suit different display choices. Marking options cover 2 aircraft, one from VF-84 of the U.S. Navy and one from VMF-351 of the U.S. Marine Corps. The finished model has a wingspan of 390 mm and a fuselage length of 318 mm. This kit suits builders who enjoy aircraft subjects with configuration choices that change the final presence on the shelf. Folded wings, alternate display parts and squadron markings allow a carrier-deck scene, a parked aircraft layout or an in-flight presentation with a clear WWII naval aviation character.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit. Tank Churchill Mk.VII, plastic assembly kit

€39.99

This 1:35 plastic assembly kit captures the Churchill Mk.VII, a British Infantry Tank Mk.IV introduced at the end of 1943 and used in the Normandy campaign to support Allied infantry units. The model recreates the tank's characteristic silhouette with its long hull, turret and the unusual running gear formed by multiple small road wheels, giving the finished build the heavy, deliberate look that made the Churchill instantly recognizable. Construction goes beyond the vehicle itself. The kit provides 4 figures: a commander, gunner, driver and farmer, plus accessory parts including a cart, milk cans, basket, bucket, lantern and bottles. Decals support multiple marking versions, and the instructions also show a winter camouflage option, opening up different finishing directions for the same subject. Selected hatches can be built open or closed, which changes how the crew figures can be placed and how much of the upper structure is shown in the final display. On the bench, the model suits builders who enjoy combining military vehicle detail with a small narrative scene. Once completed, the Churchill can be displayed as a standalone tank or arranged with the figures and accessories to suggest a quiet pause in the field rather than a combat moment. Cement and paints are required separately.

Military model vehicles 1:35

1:35 Bundeswehr Leopard 2A6, plastic assembly kit

€63.99

This 1:35 plastic assembly kit recreates the Bundeswehr Leopard 2A6 with the long 55 caliber 120 mm smoothbore main gun that defines this later tank variant. At 314 mm in overall length, the finished model carries the extended proportions of the full-size vehicle into a format that suits detailed painting, weathering and diorama work. The Leopard 2A6 also retains key features associated with earlier Leopard 2 upgrades, including wedge-shaped spaced armor and an improved electric gun control and stabilization system, giving the subject a distinctly modern silhouette and technical character. Transparent parts are used for the goggles, headlights and taillights, which helps these smaller details stand apart during finishing. Decals are included for up to 4 different marking types, including NATO versions used in Kosovo, opening several historically grounded display directions from one kit. The kit also includes 2 newly designed half body figures for the commander and loader, plus extra road signs for scene building around the completed tank. Assembly is required, with a stated assembly time of 600 minutes. Paints are required separately. On a workbench, in a display cabinet or as part of a larger European military diorama, the Leopard 2A6 brings together recognizable Bundeswehr lines, variant-specific armament and marking options in one focused scale build.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 BW Flak-Panzer Gepard, plastic model kit

€26.49

This 1:35 scale plastic model assembly kit recreates the BW Flak-Panzer Gepard, a post-WWII anti-aircraft tank operated by West Germany. The long twin 35 mm cannon layout, the radar equipment at the front and rear, and the angular tracked hull give the finished build the unmistakable profile of this radar-guided vehicle on a shelf or in a diorama. The kit is shaped around exterior details that reward careful finishing. A metal net is provided to reproduce the engine deck grille, bringing a different surface character to the rear hull than molded parts alone. Opening rear turret hatches add another structural detail to the upper section, while the movable barrel depiction introduces a mechanical element once the model is assembled. The commander figure in a beret can be placed at the hatch to add scale presence and strengthen the vehicle's operational look. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the Gepard offers a focused military modeling project with recognizable sensors, armament and hull forms to paint and detail. Once completed, the 1:35 format suits display alongside other armored vehicles, figures or scenery elements, and the radar, gun and hatch features give the finished model several convincing presentation angles.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Citroen Traction Staff Car, assembly kit

€31.49

This 1:35 Citroen Traction 11CV assembly kit recreates a staff car known for its low, elegant silhouette and distinctive fenders, bringing a classic French sedan into military and civilian WWII displays. At 125 mm long and 48 mm wide, the finished model has a compact footprint that fits naturally into dioramas while still leaving room for body contours, grille detail and cabin features to stand out. The original vehicle was notable for monocoque construction, front-wheel drive and torsion bar suspension, and the kit reflects that character in its detailed underbody and suspension areas. The suspension layout is designed with assembly in mind by keeping the parts count controlled in that section. Open-door construction reveals the interior more fully, while the closed-door option keeps the body lines uninterrupted. The included driver figure adds a seated crew presence that suits command, transport or roadside scenes. Marking choices cover 4 finishes: 2 German Army versions, 1 French Army version and 1 civilian vehicle, so the same build can be placed in very different historical settings. On its own, the Citroen works as a compact display model; alongside other 1:35 subjects, it helps build a fuller street, depot or field headquarters scene. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set Floating Car, plastic assembly kit

€11.29

This 1:35 scale plastic assembly kit brings 4 WWII German tank crew figures into a compact scene with clear character and placement options. Realistic poses give the group a natural relationship to military vehicle displays, whether arranged beside a Kübelwagen, paired with a Schwimmwagen, or set into a broader roadside diorama. The figure lineup covers several distinct roles: a field commander seated on a door, a seated driver, a grenadier leader pointing forward, and a tank commander wearing a leather jacket. That mix helps shape scenes of movement, direction and command instead of repeating the same stance across the whole group. The set is supplied unassembled, allowing careful work on seams, paint application and small uniform details. Assembly time is stated as 600 minutes. The box side also provides a road sign illustration from the Ardennes front, which can be cut out and used as a scenic element in the finished display. On a workbench, the 4-figure arrangement suits builders planning a vehicle vignette with crew interaction rather than a static lineup. In a finished display, the seated and standing poses help frame doors, seats, roadside edges and signposts with a more believable sense of scale and situation.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 French Light Tank H39, plastic model kit

€31.49

The 1:35 French Light Tank H39 plastic model kit brings a compact WWII armored vehicle to the workbench with researched proportions, rounded cast forms and a finished size of 138 mm long by 56 mm wide. Its shape reflects the distinctive character of the H39, from the low hull profile to the turret contours that define this French light tank. The turret uses slide molding to reproduce its complex geometry with fewer awkward joins, helping the assembled form stay clean and well defined. Assembly type tracks combine one-piece straight sections with molded upper sag, a detail that gives the suspension area a more natural, weight-bearing appearance. The kit also depicts the trench tail fitted to the rear, a notable feature used to cross trenches. Variant-specific parts cover the cupola, visors, engine grille, idler wheels, suspension bogies and antenna base, allowing the build to follow either French Army or German Army specification. Two marking options support different historical finishes: a French Army tank in 1940 or a German Army tank in 1945. The set also contains 1 full standing French tank crew figure, 1 German tank crew torso scanning from the cupola, and metal chains for the French Army version. On the bench or in a military collection, these details give the completed H39 a clear period setting and a strong sense of scale presence.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Floating Car Typ 166, plastic model kit

€18.99

This 1:35 plastic model kit recreates the Ger. Floating Car Typ 166 with the distinctive amphibious layout that made the Schwimmwagen stand out on rough ground and at water crossings. The hull-shaped underside is formed with slide molding, which helps preserve the vehicle's curved lower body while keeping the assembly process cleaner and more precise. In a finished display, the open cockpit, compact proportions and raised front spare wheel give the model a purposeful military profile. The kit goes beyond the outer silhouette with parts for the air-cooled 4-cylinder engine and a richly finished interior. Flooring, seats, the instrument panel and the shift lever are all represented, so the cabin keeps its visual depth even with the roof open. A folded canvas roof cover adds another layer of period character, and the moveable windshield changes the stance of the vehicle without altering the core build. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. For display, the propeller can be positioned down to depict a fording scene, which pairs naturally with muddy terrain, riverbank settings or a compact military vehicle lineup in 1:35 scale. A driver figure is included, adding a human reference point inside the cockpit and helping the finished model read as a complete scene rather than a vehicle alone.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Horch 4x4 Type1A Veh., model kit

€17.99

The 1:35 Ger. Horch 4x4 Type1A Veh. model kit brings a distinctive 6-wheel military staff car into a compact display scale with the crisp, technical look that suits historical vehicle collections. The assembly kit is designed for self-build and uses precisely fitting parts to form the chassis, body panels and running gear, creating a finished model with strong period character on the shelf or in a diorama. The build covers more than the outer body. Transparent parts provide the windscreen and side windows, while separate components such as the front grille, bonnet panels, headlights, mud flaps, tool box, fuel tank and mufflers give the vehicle its layered structure. The suspension and driveline area is represented with front and rear differentials, tie rods, lower arms, upper arms, brake drums and coil springs, so the underside carries the same mechanical focus as the body. A mounted MG 34, drum magazine, shovel, wire rope and side-mounted details extend the field-vehicle look. Decals complete the finish with tactical and divisional markings placed according to the chosen theatre scheme. On the workbench, the 600-minute assembly time supports a slower, detail-led build with room for painting and finishing choices. Tools, glue and paints are required separately. Once completed, the model suits display in open-top or covered form, and the included driver figure adds a clear focal point for vehicle-only presentations or wider historical scenes.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Kübelwagen T82 Africa, plastic model kit

€19.49

This 1:35 scale plastic assembly model kit recreates the Ger. Kübelwagen T82 Africa, a Type 82 version used in North Africa and identified by balloon tires suited to desert terrain. The open-body military car and the included standing soldier figure create a focused historical display with a compact footprint and strong period character. The build reproduces the interior and the underchassis with attention to structural areas that stay visible on the finished model. Suspension arms and the engine guard are molded as part of that lower-body detail, while the cabin layout gives the open vehicle more depth than a closed-body subject. The model also offers display choices during assembly: the doors can be fitted open or closed, and the windshield can be shown upright or folded. A folded canvas top is stowed at the rear, and the spare wheel sits on the front hood, reinforcing the field-ready silhouette seen in desert service. Assembly time is stated as 600 minutes. Paints and cement are required separately. On a shelf, in a diorama, or as part of a 1:35 military vehicle lineup, the Kübelwagen pairs compact dimensions with visible exterior detail from nearly every angle. The standing figure can be placed beside the vehicle to frame a maintenance, transport, or roadside scene without needing extra accessories.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw. III Ausf. L, plastic model kit

€43.99

This 1:35 scale plastic model kit captures the Ger. PzKpfw. III Ausf. L, one of the core tanks fielded by German armored divisions through the early and middle stages of WWII. The long-barreled 5cm KwK 39 L/60 gun, the driver's front panel and the main gun mantlet are reproduced with the sharp, mechanical look that defines this version, giving the finished tank a convincing presence on a shelf or diorama base. Beyond the outer shape, the kit carries detail into areas that stay visible during the build and after completion. The fighting compartment loading area, turret interior and commander's seat are all reproduced, which gives the open sections more structure than a closed-shell build. The mantlet section is designed as a movable assembly, and the turret is fitted so it can rotate once installed on the hull. The track run is built as a glued assembly, and the instructions specify a 600-minute assembly time. Plastic cement and paints are required separately. Display options add variety to the final result. Hatches can be set open or closed, the front spaced armor and mantlet spaced armor include optional configurations, and the included tank commander figure can be placed in the turret hatch to change the character of the finished model. Spare tracks, tools and other hull details help create a fuller exterior, whether the tank is finished as a clean display build or worked into a scene with weathering and markings.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. PzKpfw.VI Tiger I E Early, model kit

€46.99

This 1:35 scale model kit recreates the Ger. PzKpfw.VI Tiger I E Early as an early production heavy tank with the imposing proportions and long 88 mm gun that made the original vehicle so distinctive. Assembly takes about 600 minutes, giving the subject enough room for careful work across the turret, hull and running gear as the shape of this 1942 variant comes together. The early-production specification is carried through in concrete exterior details. The turret features a circular cupola, smoke dischargers and a large pistol port, while the hull adds air cleaners that help define the rear profile of the vehicle. These elements give the finished model more than a simple silhouette; they create specific surfaces, edges and fittings that support precise painting and weathering. The kit also reflects the Tiger I E as a vehicle associated with both the Eastern Front and North Africa, which opens up different historically grounded finishing directions. An authentic figure adds a human scale reference once the hatch area is complete. On the workbench, the model suits a measured build with attention to subassemblies, surface treatment and final markings. After completion, the 6 marking options allow different unit looks for display, whether the tank is shown as a standalone centerpiece or placed into a broader 1:35 military scene.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Sd.Kfz.2 Kettenkrad, plastic model kit

€27.49

This 1:35 plastic model kit captures the Ger. Sd.Kfz.2 Kettenkrad in its mid-production form with compact proportions of 140 mm length and 30 mm width, plus a trailer that extends the finished scene beyond the vehicle itself. The half-track layout, front wheel and rear track system give the subject a distinctive silhouette that stands out in military collections and diorama settings. The build focuses on mechanical character as much as exterior shape. Separate engine and transmission parts let the internal structure read more clearly, and the engine hatch can be finished open or closed depending on the chosen presentation. Photo-etched grille parts sharpen the surface detail, while the included jigs help shape those metal pieces accurately during assembly. Decals for the instrument panel meters add another layer of cockpit detail that remains visible on close inspection. Assembly time is stated as 600 minutes. Cement and paints are required separately. The included trailer with canvas cover and 3 figures opens up several display directions, from a halted roadside scene to a moving field transport setup. Two paint schemes are introduced in the manual: dark yellow or a three-colored camouflage finish, allowing the completed model to take on a different visual character while keeping the same historically researched vehicle form.

Military model vehicles 1:35

1:35 Ger. SdKfz.163 Sturmgeschütz IV, plastic model kit

€23.99

This 1:35 scale plastic model assembly kit recreates the Ger. SdKfz.163 Sturmgeschütz IV with the compact, forceful lines of the original vehicle and a long 75 mm gun that defines its low-profile silhouette. As the build comes together, the finished model develops into a detailed WWII armored subject suited to painted display, with the commander figure rising from the hatch to sharpen the sense of scale. The kit focuses on exterior details that give this vehicle its distinct character. Optional parts for a hull front cement block represent added armor reinforcement, while Schürzen side armor plates extend the profile along the running gear. The commander figure is supplied in an action pose, adding movement and a clear focal point to the upper structure. Assembly is required, with a stated build time of 600 minutes, which places the project firmly in the hands-on model kit category rather than a quick snap-together build. On the workbench, the subject offers a satisfying sequence of hull construction, armor fitting and painting. Once completed, the 1:35 scale format sits naturally in a military model collection and gives weathering, markings and display groundwork room to stand out without overwhelming a shelf or diorama base.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.173 Jagdpanther Late, assembly kit

€39.99

This 1:35 scale assembly kit captures the Ger. SdKfz.173 Jagdpanther Late as a late-production tank destroyer built on the Panther medium tank chassis. The fixed fighting compartment and long 88 mm gun give the model its low, purposeful silhouette, with sloped armour surfaces and a layout that stands out strongly in a finished military display. The kit supports 2 late-production versions, covering vehicles built from May to December 1944 or from December 1944 onwards. Inside the fighting compartment, the main gun loading part, bulkhead and commander's seat create a more complete interior scene when hatches are left open. A movable escape hatch adds another working detail, and the selectable open or closed hatch positions change how much of the interior remains visible. Parts are also included for 2 exhaust configurations: die-cast type exhausts or exhausts with flame dampers. A commander figure is included to complete the upper-hull display. During assembly and finishing, the model offers several distinct presentation choices, from a closed-up vehicle profile to an open-hatch display that reveals the interior structure. Camouflage painting, unit markings and weathering can shift the final character from workshop-fresh to field-worn. Assembly time is stated as 600 minutes. Paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.182 Pz VI Kingtiger, plastic model kit

€48.99

This 1:35 scale plastic model kit recreates the Ger. SdKfz.182 Pz VI Kingtiger in its production turret form, combining the heavy stance of the late-war tank with finely rendered surface detail for a focused military build. The long L/71 88 mm main gun, angular turret and sharply defined hull give the finished model a commanding shelf presence, whether placed on its own or alongside other 1:35 armour subjects. The kit depicts the Kingtiger with carefully reproduced weld lines across the hull, bringing extra definition to the armour plates and panel transitions. A 150 mm frontal armour layout and 80 mm side armour are part of the vehicle's historical configuration represented here, shaping the unmistakable silhouette of this heavy tank. The opening turret escape hatch exposes the interior gun breech, so the upper structure retains visible depth after completion. Nylon mesh is supplied to recreate the engine cover nets with a finer texture than a solid moulded surface, and the commander figure adds a clear focal point at the turret opening. With 600 minutes of assembly time, the build suits modelmakers who enjoy a substantial static armour project with display-driven detail. The finished tank works well in a cabinet, on a diorama base or as part of a World War II vehicle lineup. Kit, instructions and decor are included.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.9 Famo, model kit with lowloader

€159.99

This 1:35 scale Ger. SdKfz.9 Famo with Sd.Ah.116 lowloader captures the presence of a heavy transport combination built for wartime recovery and hauling scenes. With an overall length of over 640 mm, the model creates a long, low silhouette that stands out immediately on a shelf, in a diorama, or at the center of a loading setup. The trailer unit is built from a front wheeled section, a rear wheeled section, and a long central platform, a layout that gives the transport combination its distinctive proportions. The half-track and trailer pairing opens up detailed finishing work across wheels, tracks, deck surfaces, towing hardware, and crew placement. Assembly is required, with a stated assembly time of 600 minutes. Paints are required separately. The 12 included figures support a tank loading scene at the rear of the trailer and help turn the finished build into a full logistics moment rather than a standalone vehicle. Crew placement on and around the transporter can suggest loading, supervision, convoy movement, or a halt between operations, giving the completed model several display directions within military miniature scenes.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Ger.Mortar-Troop (4), plastic model kit

€9.79

This 1:35 plastic model kit captures a German infantry mortar team centered on the 8 cm GrW 34, with 4 figures arranged around the weapon in a tense firing moment. The scene combines a squad leader, loader and crew positions with equipment details that give the finished build a strong battlefield presence on a shelf or within a diorama. The mortar itself is rendered with separate structural elements including the bipod legs, baseplate, sight and adjustment handles. Beyond the firing setup, the weapon can also be built in an unassembled state, which changes the character of the scene toward transport or preparation. The set adds 6 mortar rounds and 4 ammunition cases, split into 2 wooden and 2 metal versions, for more variation in how the ground layout is arranged. Figure clothing reflects M36 field jackets and boots, while smaller accessories such as firearms, haversacks, canteens and binoculars extend the historical look of the crew. With an assembly time of 600 minutes, the kit suits model builders who enjoy painting, positioning and scene composition as much as the build itself. Cement and paints are required separately. Once completed, the combination of action poses, crew equipment and alternate mortar configuration supports anything from a compact standalone display to a broader WWII diorama setting.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 German Assault Troops, figure model kit

€7.19

This 1:35 figure model kit brings WWII German assault troops into diorama building with 8 infantry figures arranged for active battlefield scenes. The set is built around self-assembly, giving each stance its shape through precisely fitting parts and leaving room for individual paintwork and finishing choices. The illustrated instruction sheet shows multiple combat poses and equipment layouts, including a jumping-over stance, an MP40 firing pose, a commanding NCO, an MG34 firing position and assault poses with Kar98K rifle handling. Field gear details shown in the build references include helmets, ammo pouches, canteens, entrenching tools, backpacks, bedrolls and holsters, which help create a more complete military scene once assembled. The stated assembly time is 600 minutes, making this a substantial bench project with time for careful fitting, painting and pose definition. Tools, glue and paints are required separately. On a display base or within a larger diorama, the 8-figure composition can suggest movement across open ground, suppressive fire or a command exchange between advancing troops. The 1:35 scale also suits pairing with vehicles, terrain sections and other military miniatures in the same scale for a more layered scene.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 German Infantry 1943-45, figure assembly kit

€17.99

This 1:35 scale figure assembly kit brings a late-WWII infantry group into military model scenes with 5 posed soldiers, period uniforms and newly molded weapon accessories. The combination of a signalling NCO, kneeling riflemen and a grenadier preparing a Panzerfaust creates a squad arrangement that reads clearly beside armor, cover or ruined terrain. Each figure is shaped for a specific battlefield role rather than repeated around a single stance. The set depicts a non-commissioned officer signalling rearwards, a rifleman looking forward with both knees on the floor, a rifleman carrying an anti-tank mine, a grenadier setting up a Panzerfaust while carrying an MP44 rifle, and a soldier in poncho setting up a Mauser G43. A grenade can be fitted to the right hand of one rifleman in place of the anti-tank mine, which opens an alternate loadout for the same sculpt. Quality decals are provided for shoulder and collar insignia, tank kill badges and caution markings on the Panzerfaust. The poncho figure uses an ergonomic parts breakdown that supports cleaner handling of folds and layered clothing during the build. Assembly takes 600 minutes. Cement and paints are required separately. The set also pairs naturally with 1:35 armored vehicle subjects, including the separately sold 1:35 German Panzer IV/70(A), for more complete late-war diorama layouts.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Hetzer Mid Production, assembly kit

€56.99

This 1:35 assembly kit recreates the German Tank Destroyer Hetzer in its mid production form, combining the low, compact hull of the Jagdpanzer 38(t) with the sharply sloped surfaces that define its silhouette. The fixed Pak 39 L/48 75 mm gun and 4-crew layout place the vehicle firmly in the late-war tank destroyer category, giving the finished model a focused, purposeful presence on the shelf. The design is based on the Panzerkampfwagen 38(t), a foundation that shaped the Hetzer's compact proportions and enclosed fighting compartment. Tamiya developed this release with brand new moldings for the 1:35 scale version, adding details such as the top-mounted remote control MG34 position and periscopic binoculars that distinguish this production stage. The real vehicle entered development in 1943 as a purpose-built replacement for interim tank destroyers such as the Marder, and 2,584 were produced by May 1945. That production history matters here because the kit focuses specifically on the mid production configuration rather than blending features from earlier or later vehicles. With an assembly time stated as 600 minutes, the build suits model sessions that unfold over several stages, from chassis and hull work to painting and markings. The finished vehicle pairs naturally with the included standing crew figure for a compact display scene, whether placed as a single armored subject or alongside other 1:35 military builds. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 KingTiger Henschel Zimmerit Sheet Accessory

€11.99

The 1:35 Zimmerit Sheet KingTiger Henschel adds the distinctive anti-magnetic coating pattern to a King Tiger Production Turret build with a cleaner, more controlled method than shaping putty by hand. The sheet is made for model builders who want the visual depth of Zimmerit across the armor surfaces while keeping the texture even from panel to panel. The set contains 1 Zimmerit sticker sheet with pre-cut, numbered sections sized for the 1:35 German King Tiger Production Turret, Item 35164. Larger pieces cover broad hull and turret areas, while smaller inserts and curved sections fit around openings, edges and raised details. The reference layout identifies more than 20 individual sections, and the guide also allows 2 different coating patterns on the front and rear of the turret to match the version being assembled. Application is done on a clean surface before exterior accessories are fitted, with each section cut along its outline and pressed down firmly. On the workbench, this accessory supports a more historically detailed finish on the turret sides, front armor and upper hull without the time demand of hand-applied putty texturing. Assembly takes 600 minutes. Paints are required separately.

Military model vehicles 1:35

1:35 KPz Leopard 2 A7V, plastic model kit

€59.99

This 1:35 plastic model kit recreates the Leopard 2 A7V with the broad, heavily updated look of the modern main battle tank and a finished size of 320 mm in length and 110 mm in width. Square headlights, the front additional armor plate and the revised turret rear shape give the build the distinct A7V profile, turning the completed model into a commanding centerpiece on a shelf or diorama. The kit uses totally new parts for this version and carries over hallmark Leopard details such as the L/55 120 mm gun, while adding A7V-specific features including mud flaps on the turret rear sides. Clear parts are supported by included masking stickers to help keep framing lines neat during painting. Three marking options allow depiction of vehicles from the 393rd Panzer Battalion and the 104th Panzer Battalion, adding unit-specific identity to the finished tank. Tools, paints and glue are required separately. During assembly, the mix of large armor surfaces, mesh details and crew figures creates a build with clear visual stages, from hull and turret construction to markings and final finishing. Once completed, the model suits military collections, display scenes and modern Bundeswehr lineups where the updated armor layout and turret details stand out at a glance.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 KS600 Sidecar Combination, model kit

€19.99

The 1:35 KS600 Sidecar Combination model kit brings a military motorcycle and sidecar subject into a compact format with a finished vehicle length of 71 mm and width of 47 mm. Its parts layout captures the KS600 form with a pressed steel frame look, a horizontally opposed engine and the distinctive sidecar connection, creating a display piece with clear mechanical character on the bench or in a diorama scene. Engine detail is built up with separate head components and defined air-cooling fins, while the front and rear wheels are split into right and left sections so the spoke pattern can be rendered with sharper relief. The sidecar uses 3 connecting sections to join the motorcycle, reflecting the structure of the full-size machine and helping align the combination accurately during assembly. Front and rear saddles, side bags and instrument panel markings add further period detail. Assembly time is stated as 600 minutes. Cement and paints are required separately. The finished combination suits roadside, dispatch or patrol-style displays, especially when paired with the 3 included figures in seated and standing positions. Number plate decals for German Army and Air Force versions support different finishing directions, and the compact 1:35 scale fits naturally into military miniature layouts with vehicles, figures and scenic groundwork.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Panther G Early Zimmerit Sheet Model Accessory

€13.49

This 1:35 Zimmerit Sheet is made for the Panther Ausf.G Early Production and brings the ridged anti-magnetic coating pattern onto the finished tank with a cleaner, more controlled method than hand-applied putty. The pre-cut sticker layout follows the vehicle's armor geometry, so broad hull plates, turret faces and narrow detail strips can be matched to their intended positions with less shaping work. The sheet is aimed at novice to intermediate modelers and turns a time-intensive surface treatment into a more manageable finishing step. Numbered parts help identify placement, while the instruction guide shows the tank from multiple angles for reference during fitting. Openings and relief areas can be cut to suit hatches, mantlet sections and raised details, which helps the textured pattern sit closer to the underlying surfaces. Star-marked spare pieces are included for selected areas, giving extra material where trimming accuracy matters most. Assembly time is listed as 600 minutes. Paints and cement, if used, are not included. Applied before accessory parts are attached to the hull, the sheet supports a more orderly build sequence and keeps access open around fittings and edges. On an unpainted Panther G early build, the textured coating changes the character of the armor immediately, adding the distinctive surface pattern seen on this version of the vehicle.

Military model vehicles 1:35

1:35 Panzer IV/70(A), plastic model assembly kit

€53.99

This 1:35 plastic model assembly kit captures the German Panzer IV/70(A) with the long, low silhouette that defined this late-war tank destroyer. At 242 mm long and 98 mm wide, the finished model gives the L/70 gun, raised fighting compartment and side armor layout a strong presence on the workbench or in a display lineup. The hull is based on the Panzerkampfwagen IV Ausf.J kit, with newly tooled sections beyond the drive sprockets, road wheels and return rollers. Side slide molding helps reproduce the body shape, and late-production features such as the fuel port hatch and return roller support frame are recreated in detail. Surface treatment adds further depth with a cast gun shield and rolled steel fighting compartment walls, while assembly type lightweight tracks use one-piece straight sections to simplify alignment across the upper and lower runs. Large photo-etched parts capture the mesh Schurzen with a finer look than molded solid panels. The finished vehicle can be posed with the main gun elevated, depressed or traversed, and the sighting device moves with it for a more convincing final presentation. Opening commander and loader hatches add extra display options, and the set includes 1 torso commander figure to bring scale to the upper hull. Two marking options allow the model to be finished as an Eastern Front or Western Front vehicle. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Panzerkampfwagen IV Ausf.G, model kit

€49.99

This 1:35 scale plastic model assembly kit recreates the Panzerkampfwagen IV Ausf.G in its early production form with the L/43 7.5 cm KwK40 gun, giving the tank its distinctive long-gun silhouette. The set combines the vehicle with a motorcycle and 5 full-body figures, shaping the build into a complete Eastern Front scene rather than a standalone armoured vehicle. The tank is paired with 3 crew figures, while the motorcycle is joined by a rider and a standing officer, all wearing Eastern Front uniforms. That mix supports a display with clear interaction between crew, command and dispatch roles. The motorcycle adds contrast in scale and shape beside the tracked vehicle, which helps the finished composition read as a field moment instead of a static single-vehicle build. Assembly is required, and the stated assembly time is 600 minutes. Paints and cement are required separately. On a shelf, in a cabinet or as part of a larger historical diorama, the combination of tank, motorcycle and figures creates a scene with movement and direction. The 2 decal options make it possible to finish the model as one of 2 Eastern Front vehicles while keeping the focus on the early Ausf.G configuration and its period-specific setting.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 U.S. Army Infantry, plastic model figure set

€5.49

This 1:35 scale plastic model assembly kit recreates a 4-figure U.S. infantry group set in Western Europe after the Normandy Landings in June 1944. The poses capture a squad in active motion, with one figure lobbing a grenade, others handling firearms, and one operating a flamethrower, giving the set a strong sense of direction when placed into a military miniature scene. The figure mix supports more than a single repeated stance. Different combat roles and body positions help break up the rhythm of a display, whether the scene calls for an advancing patrol, a defensive position or a larger battlefield layout. Sculpted clothing and field gear add further definition, while the legwear variation between 3 figures in standard cloth and 1 in leather introduces a subtle uniform contrast that stands out during painting. Assembly takes 600 minutes. Paints, tools and cement are required separately. On a shelf, in a vignette or alongside 1:35 military vehicles, the set gives terrain builds and wartime scenes a human focal point. The 4 figures can be spaced as a coordinated squad or used to populate different sections of a broader diorama with distinct battlefield tasks.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M113A2 Desert, plastic model kit

€41.99

This 1:35 plastic model kit depicts the U.S. M113A2 in Desert configuration, combining the compact tracked shape of the armored personnel carrier with the field equipment and recognition fittings seen on later-service vehicles. At 153 mm overall length, the finished build brings the low hull, open hatch area and heavily equipped exterior into a format that reads clearly on a shelf or in a diorama scene. The M113A2 version entered production in June 1979 and introduced changes based on Vietnam combat experience, including an improved transmission, revised operating equipment, an upgraded cooling system and reinforced suspension. On this kit, the desert-specific configuration is expressed through the enlarged trim vane, front-mounted smoke dischargers, rear and side external fuel tanks and Combat Identification Panels. The build can be finished as 1 of 4 vehicle markings, with decals for 3 vehicles deployed to Iraq and 1 vehicle deployed to Bosnia-Herzegovina. Commander and driver figures support a crewed display, while extra equipment and ammo cases help create a vehicle loaded for movement or patrol duty. Assembly takes about 600 minutes. Paints, cement and tools are required separately. The finished model suits military miniature displays, Gulf War and Iraq War vehicle lineups, and diorama scenes where external stowage, crew presence and unit markings carry the historical setting.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Willys Jeep MB 4x4, plastic model kit

€21.49

This 1:35 scale plastic model kit captures the US Willys Jeep MB 4x4, one of the most recognizable light utility vehicles of the Second World War. The compact open-top body, upright windshield frame, rear-mounted spare wheel and military fittings give the finished model the unmistakable silhouette of the original, whether placed on a shelf or worked into a historical diorama. Assembly is required, and the build time is stated as 600 minutes. The kit structure follows the real vehicle in stages, with engine assembly, propeller shaft installation, leaf-spring suspension, body fitting, seat construction and final exterior details. Interior sections include separate driver, passenger and rear seats, an instrument panel and cabin fittings, while exterior assemblies cover the radiator, windshield, jerry can, mirror and spare wheel. An optional M1919A4 machine gun configuration is also shown, along with alternative front bumper equipment. The finishing stage adds another layer of historical character through decal placement and paint references for several wartime marking schemes, including unit codes, stars and windshield lettering. A seated driver figure is part of the kit and can be positioned to match the steering wheel, reinforcing the active in-service look of the completed jeep. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Fig.-Set MG-Crew Maneuver, model kit

€12.29

This 1:35 scale figure set brings a WWII German machine gun crew into a diorama with 5 coordinated poses that suggest movement across open ground, supply handling and weapon deployment. The plastic assembly model kit depicts soldiers in M43 field uniforms adopted in 1943, with boots and leggings that give the group a consistent late-war appearance. The crew composition follows a support team structure: a noncommissioned officer carries an MP40 submachine gun, the machine gunner has an MG42 on his shoulder, and the remaining figures handle ammunition and support equipment. The set also provides sharply detailed accessories such as an MG34, tripod gun mount and ponchos, along with field gear including pouches, canteen, gas mask case, haversack, mess tin, bayonet and folding shovel. These smaller components help each figure read clearly from multiple viewing angles in a display. The varied carrying poses and marching stances create spacing options around vehicles, gun positions or infantry formations. Placed beside tanks or other military vehicles in 1:35 scale, the figures can suggest resupply, repositioning or a maneuver phase rather than a static lineup. The combination of weapons, support gear and role-specific poses gives builders room to shape a broader battlefield scene with infantry activity at its center.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Ger. Cargo Truck 3to (2), model kit

€44.49

This 1:35 model kit captures the WWII German 3Ton 4x2 Cargo Truck with the purposeful lines and working character of a vehicle used across many transport roles. The 174 mm finished length gives the truck a substantial presence on the bench or in a diorama, while the all-new tooling focuses on the specific structure of this 1930s design. A key feature of the original vehicle was its forward-slanted chassis, created to balance cargo weight, and that unusual layout is reproduced here as part of the build. The truck is paired with 2 figures and a decal sheet, and the marking options cover 4 unit styles from German army and Luftwaffe service. Window masks are also included to support cleaner paint separation around the cab glazing. Assembly is required, with a stated assembly time of 600 minutes. On a shelf, in a supply-column scene or alongside other 1:35 military subjects, the truck fits naturally into transport, maintenance and frontline display settings. Fuel drums and jerry cans help shape a fuller cargo load, while the crew figures add scale reference and a more active finished scene.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Jerry Can Set, model accessory kit

€6.99

This 1:35 accessory kit brings the compact form of the early German WWII Jerry Can into military model scenes with 12 matching cans and a set of support details for vehicle stowage. The early pattern uses the simple cross-shaped indentation, a feature that distinguishes it from later can designs and gives period builds a more specific visual signature. The 20-liter container design was known for a compact shape that could be stowed aboard vehicles, and that same proportion translates well to truck beds, side racks and supply layouts in scale form. Each can captures the 3-handle top arrangement and the straightforward lid mechanism that made the original container quick to handle and secure when closed. Beyond the cans, the kit adds 2 storage box types, a Notek light, a taillight, a convoy marker and a jack with its base, so a single build can gain both cargo detail and exterior fittings. Assembly is required, and the stated assembly time is 600 minutes. Paints and cement are required separately. Used on light vehicles and tanks, this set suits dioramas built around transport, maintenance and field supply scenes. The mix of cans, boxes and fittings also supports more layered layouts, whether placed as stacked cargo, mounted equipment or workshop details around a parked vehicle.  Warning! Not suitable for children under 14 years.

Model ships 1:350

1:350 Bismarck, battleship model kit

€82.99

The 1:350 Bismarck model kit brings a landmark battleship into a large display scale, with a finished length of 717 mm and a beam of 103 mm that give the hull real presence once set on its 2 black stands. The long gray hull, deck sections and detailed fittings shape a build that reads clearly as a historic warship, from the main gun turrets to the mast structures and stern details. This assembly kit is designed as a static display model and comes as an unpowered build with the main ship components molded on sprues plus a decal sheet for markings. The large hull section provides the foundation for the superstructure, armament and deck layout, while the separate display stand supports presentation after completion. Assembly time is stated as 600 minutes, making the project substantial enough for careful trimming, fitting and finishing across multiple work sessions. Cement and paints are required separately. On the workbench, the size of the 1:350 format leaves room for methodical painting and detail work across the camouflage pattern, deck areas and smaller fittings. Once completed, the battleship sits as a striking naval display piece, whether placed in a collection of historic vessels or shown on its own as a single large-scale centerpiece.

Model aircraft kits 1:48

1:48 A6M5c Type 52 Zero Fighter, aircraft model kit

€16.99

This 1:48 scale aircraft model kit recreates the A6M5c Type 52 Zero Fighter, the final A6M5 series variant, with the distinctive late-war armament layout that set it apart in service. The finished subject combines the compact lines of the Zero with details such as the radial engine, framed canopy, extended landing gear and centerline drop tank, giving the build a strong period silhouette on the shelf. The kit draws on the Type 52c configuration described in the historical notes, including the revised cowling arrangement linked to the 13 mm gun installation and the heavier weapons fit of 3 machine guns and 2 cannons on the full-size aircraft. Assembly diagrams show optional rocket mounting holes in the wings, movable propeller installation, and alternate cowl flap presentation for open or closed engine-cooling detail. Interior and exterior painting references cover cockpit tones, engine finishes, propeller colors and upper and lower surface schemes, while decal guides support multiple aircraft markings from 1944 and 1945. On the bench, the combination of configuration choices and finish references gives the build a clear historical direction without limiting the final presentation. The included figures allow the aircraft to stand alone as a display piece or sit within a small ground scene, with crew poses that add context beside the completed airframe. Tools, cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Bf109 G-6 Late Model, aircraft kit

€38.99

The Ger. Bf109 G-6 Late Model aircraft kit in 1:48 scale brings a defined historic aircraft variant to the workbench, combining compact display size with the focused, hands-on process that makes scale model building so absorbing. The late-model version sets this build apart within the Bf109 G-6 family, giving the finished aircraft a more specific identity than a generic fighter subject. In 1:48 scale, small details remain visible during painting and finishing while the overall size stays practical for a shelf, cabinet or diorama setting. The aircraft format suits builders who enjoy careful alignment, surface preparation and a measured painting process shaped around a recognizable World War II design. Because this is a model kit, the construction itself is the central activity rather than a secondary setup step. On the bench, the project supports steady progress through assembly, painting and final presentation, whether the aim is a single finished aircraft or a broader historical collection. The completed model also fits naturally into display scenes with other 1:48 scale aviation subjects.

Model aircraft kits 1:48

1:48 Ger. Focke Wulf Fw190 D-9, aircraft model kit

€28.99

This 1:48 Ger. Focke Wulf Fw190 D-9 assembly kit brings a late-war fighter aircraft into a focused scale build with a finished wingspan of 219 mm and a fuselage length of 213 mm. The long engine section and compact airframe give the model the distinctive proportions of the D-9, creating a strong aircraft silhouette during assembly and once placed on display. The subject is based on the Fw190 D-9 production aircraft that entered service in 1944, a development of the Focke Wulf line powered by the Junkers Jumo 213 engine. That background gives the model a specific place in aviation history rather than a generic fighter outline. The 600-minute assembly time points to a build with room for careful preparation, painting and finishing. Paints required for the scheme are identified in the source material, supporting accurate colour planning before the first parts are removed from the sprues. On the bench, the compact 1:48 format suits builders who enjoy detailed aircraft subjects without needing a large display footprint. Once completed, the model works equally well as a standalone WWII aircraft display or as part of a broader 1:48 aviation collection with other period fighters and support aircraft.

Model aircraft kits 1:48

1:48 Ger. Messerschmitt Me262 A-1A, aircraft kit

€44.99

This 1:48 plastic assembly kit recreates the Ger. Messerschmitt Me262 A-1A, the first jet-powered aircraft to see service, in a format that gives the aircraft's swept shape and twin-engine layout real presence on the bench. With an overall length of 221 mm and a wingspan of 264 mm, the model brings the compact proportions of the historic fighter into a display scale that still leaves room for fine surface work and careful finishing. The build includes a die-cast nose wheel well weight to support the tricycle landing gear layout, while the pilot figure adds a crew element inside the cockpit. Decals for 4 different markings allow different finishing directions within the same aircraft type. The kit focuses on late-production A-1A details, including underwing R4M air-to-air rockets and nose-mounted W.Gr 21 launchers, so the finished aircraft can reflect a heavily armed operational configuration. Assembly time is stated as 600 minutes. Cement and paints are required separately. On the work surface, the open or closed panel options invite different display choices, from a cleaner silhouette to a more technical presentation with internal detail exposed. Once completed, the model suits shelf display, aviation collections, and focused painting sessions built around Luftwaffe camouflage, metallic jet exhaust areas, and the distinctive nose armament layout.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 SdKfz.181 Tiger I, plastic model kit

€25.49

This 1:48 plastic model assembly kit recreates the SdKfz.181 Tiger I Early Production in a compact format that still carries the unmistakable presence of the original heavy tank. At 175 mm long and 77 mm wide, the model brings the long 88 mm gun, broad hull and tall turret into a size that suits careful bench work as well as finished display. The lower hull uses separate lower and side sections rather than a one-piece die-cast tub, giving the build a different construction approach in this release. H parts for the lower hull derive from Item 32575, while the turret E parts and upper hull F parts based on Item 32504 are modified for plastic parts assembly. That layout gives the build a clear structure across hull, turret and running gear, with assembly type tracks that use 1-piece straight sections to support clean placement along the longer track runs. Metal chassis weights add mass inside the model, reinforcing the solid feel once the tank is complete. Two marking options are included for distinct battalion finishes: the 503rd Heavy Panzer Battalion in a 3-color camouflage pattern or the 502nd Heavy Panzer Battalion in overall Dark Yellow. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately.

Model aircraft kits 1:48

1:48 US North American P-51D Mustang model kit

€29.99

This 1:48 scale assembly kit recreates the US North American P-51D Mustang, the definitive production version of the famous World War II fighter, with the distinctive bubble canopy and the lean lines that made the aircraft instantly recognizable in the air and in display form. The finished model measures 205 mm in fuselage length with a 236 mm wingspan, giving the aircraft enough presence for a display shelf while keeping the build focused and manageable. The kit goes beyond the outer shape with a detailed cockpit that includes the seat, instrument panel, radio equipment and internal fittings, plus an optional seated pilot figure. Two canopy styles are provided, covering a Dallas-built canopy and a normal canopy, and the canopy can be installed in an open or closed position. The propeller uses a poly cap mounting that keeps it movable after assembly. Under the wings, the strengthened stores layout is represented with 75 gallon drop tanks, and the landing gear can be fitted for a grounded display. Decal and painting guides support several 8th Air Force marking schemes with squadron codes, serials and invasion stripes. Assembly time is stated as 600 minutes. Cement and paints are required separately. On the bench, the combination of interior detail, alternate canopy parts and historically specific markings gives the build a strong finishing phase. Once completed, the silver airframe, blue nose accents and wartime insignia create a display piece with a clear 8th Air Force identity.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:48

1:48 WWII Figure-Set Ger.Inf.Maneuv.(15), model kit

€12.99

This 1:48 scale figure set brings 15 WWII German personnel into diorama scenes with a mix of relaxed poses, marching movement and resting tank crew. The combination suits non-combat layouts especially well, where road sections, staging areas and behind-the-lines moments need figures that look occupied rather than posed for battle. The line-up covers 7 machine gun crew on maneuvers, 2 standing infantry, 3 tank crew, 2 officers and 1 military policeman. Two officer figures and the military policeman appear here for the first time in this scale, adding roles that broaden scene planning beyond standard infantry placement. Infantry uniforms are modeled as M43 field uniforms, giving the set a defined historical look. Separately molded weapons and equipment add finer handling during the build, and the machine gun tripod mount is part of the set for support-weapon scenes. Assembly time is stated as 600 minutes. Placed beside vehicles, supply areas, checkpoints or field positions, the figures help create scenes with command, movement and routine activity instead of direct combat. The varied poses also work across compact display bases, larger terrain builds and detailed historical vignettes where spacing, direction and gesture shape the story. Paints, cement and tools are required separately.

Model car kits 1:24

1:6 Cable 0.8mm OD Bla 2m, model cable

€4.49

This 0.8 mm vinyl cable with a wire core adds convincing mechanical detail to scale car and motorcycle models, where exposed ignition lines, wiring harnesses and pipe runs shape the finished look. The black finish suits engine bays, chassis areas and frame sections, while the internal wire helps the cable hold routed positions more reliably than hollow tubing. The 2 m length supports longer runs, cut-to-length sections and repeated use across several detailing points on the same build. It is intended for 1:6, 1:12 and 1:24 scale work, making it suitable for large display motorcycles, compact car subjects and smaller mechanical scenes that need visible line detail. Different diameters are available within the range, allowing closer matching to the line thickness seen on the subject being modelled. Using the cable requires holes to be made in the model where the routing calls for fixed entry or exit points. On a workshop bench, the cable can be trimmed and guided through engine compartments, along frames or around pipe layouts to sharpen the technical character of the finished replica. It also suits upgrade work on existing builds where added wiring changes a clean shell into a more complete scale presentation.

Model car kits 1:24

1:6 Carbon Decal Plain EF, water-slide decal

€8.19

Carbon Decal Plain EF adds an extra fine carbon weave to model surfaces with a clean wet-slide format that can be trimmed to the exact section required. On spoilers, winglets and body panels, the 130 x 190 mm sheet helps recreate the look of exposed carbon parts with a tighter pattern suited to smaller scale detail. Because the sheet is plain rather than pre-cut, each piece can be shaped for the specific panel before application. The decal is applied by cutting the required section, dipping it in tepid water for about 10 seconds, placing it on a clean cloth, then sliding it from the backing sheet onto the model. Positioning is adjusted while the decal is wet, and a soft cloth is used to press out excess water and air bubbles. When used with decal setting solutions such as Mark Fit or Mark Fit Strong, the film can be formed more easily over curved surfaces. The sheet suits static model subjects in 1:6, 1:12 and 1:24 scale, including cars and motorcycles with visible carbon-style aero parts or trim sections. It works well for builders who want to add surface detail to custom projects, replace plain moulded finishes, or refine selected areas with a more technical woven appearance.

Model car kits 1:24

1:6 Carbon Decal Twill EF, model decal sheet

€8.19

This carbon pattern decal sheet gives scale models a crisp exposed-weave finish on parts such as winglets, spoilers and body panels. The twill extra fine pattern is sized for 1:6, 1:12 and 1:24 subjects, so the surface effect stays convincing across bikes, cars and other static builds. The sheet measures 130 x 190 mm and comes without pre-marked shapes, leaving each section free to match the exact outline of the part being covered. That open format suits narrow aero pieces, curved fairings and larger panel sections where a fixed template would limit placement. The wet-slide method is straightforward: cut the required shape, dip the decal in tepid water for about 10 seconds, place it on a clean cloth, slide it from the backing sheet onto the model, then gently press away excess water and air bubbles with a soft cloth. When used with MARK FIT or MARK FIT STRONG decal setting solution, the film forms more easily over curved surfaces. On display models, the extra fine weave adds a technical layer that paint alone cannot reproduce. It works especially well on race-inspired bodywork, motorcycle parts and detail zones where exposed carbon is part of the original machine's look.

Model motorcycle kits 1:6

1:6 Honda CB750F 1979, plastic assembly kit

€104.99

The 1:6 Honda CB750F 1979 plastic assembly kit recreates one of Honda's best-known late-1970s road bikes with a strong focus on shape and mechanical realism. The finished model brings out the machine's curved tank and body lines, while metal plated parts on the forks and exhausts give the motorcycle its period-correct contrast of painted surfaces and bright metal accents. At the center of the build is an air-cooled inline 4-cylinder engine with 4 carburetors, detailed cooling fins and spark plug cables depicted with vinyl tubing. This combination gives the engine area real depth instead of a simplified block appearance. The front fork assembly uses metal parts and coil springs, so the suspension can move after assembly. With side covers designed to be removable, the internal mechanisms remain visible whenever a closer look at the bike's construction is wanted. An assembly time of 600 minutes supports a slower, detail-focused build with room for careful painting and finishing. Paints are required separately. On a shelf, in a hobby room or alongside other large-scale motorcycle models, the CB750F stands out through its exposed engine layout, plated exhaust finish and the unmistakable silhouette of a 1979 superbike.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Honda CRF 1000L Africa Twin, motorcycle kit

€254.99

The 1:6 Honda CRF 1000L Africa Twin assembly kit brings Honda's modern adventure touring motorcycle into a large display scale that gives the bodywork, engine area and chassis layout real visual presence on the bench and on the shelf. Inspired by the CRF1000L released in 2015, the subject draws on the look of Honda's Paris-Dakar-winning off-road heritage while presenting the proportions of a contemporary long-distance machine. At this size, the stepped seat, tall windscreen, handguards, mirrors, rear rack and exposed header pipes read as distinct parts rather than small impressions, which gives the finished motorcycle a more convincing mechanical character. The full-size CRF1000L is defined in the source material by a 998cc parallel-twin engine, 92 hp, dual clutch transmission, selectable torque control and ABS brakes, and that technical identity shapes the model's detailed appearance. The assembly time is stated as 600 minutes. Assembly kit contents are included; tools, cement and paints are required separately. On a worktable, the large-format parts layout suits careful painting and staged sub-assembly. Once completed, the motorcycle's red, white and blue graphics, gold wheel finish and upright enduro stance create a display piece that stands out in a collection of road, rally or motorcycle subjects.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Bf-109 G-6 Messerschmitt, plastic model kit

€26.99

This 1:72 scale plastic model assembly kit recreates the Messerschmitt Bf-109 G-6, the most numerous version of the Bf109 family, with the refined lines of the Gustav variant and the characteristic Beule bulges on each side of the cockpit cowling. The compact format pairs display presence with a manageable footprint, with a finished wingspan of 138 mm and fuselage length of 125 mm. The tooling takes inspiration from the highly accurate 1:48 model while interpreting the aircraft for 1:72 scale, and the engine cowlings are depicted closed. Optional drop tank parts allow the underside configuration to match a service aircraft fit, and 2 marking options are included for JG51, with its distinctive eye marking on the Beule, and JG54. Assembly is required, with a stated build time of 600 minutes. Paint and cement are required separately. On the bench, the compact dimensions make subassemblies easy to handle during painting and decal work. Once completed, the model suits shelf display, diorama use, or a line-up with other 1:72 WWII aircraft, where the open or closed canopy and unit markings give each finished build its own character.

Model aircraft kits 1:72

1:72 Focke-Wulf Fw190 A-3, plastic model kit

€15.99

The 1:72 Focke-Wulf Fw190 A-3 plastic model kit brings a key WWII fighter into a compact scale that still leaves room for careful finishing, painted cockpit work and crisp exterior markings. Its single-seat layout, radial-engine nose and Luftwaffe styling give the finished aircraft a strong display presence, whether placed on a shelf, in a cabinet or alongside other aircraft from the same period. This assembly kit focuses on the A-3 version of the Fw190 series, the variant fitted with the improved BMW 801Dg engine rated at 1,700 hp. The historical configuration also reflects the increased armament of 6 guns, with 2 MG151 cannons in the wing roots, 2 MG FF guns outboard of the landing gear and 2 fuselage-mounted MG 17 machine guns. Those details give the build a more specific identity than a generic Fw190 and support a finish that matches a defined aircraft version. The source material also points to squadron insignia, personal pilot markings and colour additions on the lower cowl, wing tips and rudder, opening up different painting approaches within the aircraft's wartime service context. With an assembly time stated at 600 minutes, the build suits longer bench sessions centred on test fitting, painting and decal placement. Paints are required separately, making it possible to approach the finish with the exact tones chosen for the selected markings and unit style.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Supermarine Spitfire Mk.I, aircraft model kit

€15.99

This 1:72 scale assembly kit recreates the Supermarine Spitfire Mk.I with the aircraft's unmistakable elliptical wing shape, slim front cowling and single-seat fighter layout. At 128 mm in fuselage length and 156 mm in wingspan, the finished model brings a compact WWII aircraft silhouette to the workbench and display shelf. The subject is rooted in one of the most recognisable British fighters of the Second World War, first flown on 5 March 1936 and powered in service by the Rolls-Royce Merlin engine. Tamiya's kit format turns that aircraft into a detailed build with cockpit, fuselage halves, wing assembly, main landing gear and propeller installation shown as separate construction stages. The instructions also show alternative canopy parts, underside details and decal placement points, giving the builder clear reference for finishing work. Decals provide RAF-style insignia and code markings, and the paint guide lists specific colour references for camouflage, interior sections and smaller exterior details. The 600-minute assembly time suits a paced modelling session with trimming, cementing, painting and decal application handled step by step. Once completed, the model sits well in a collection of historic aircraft, and it also works as a focused weekend project for builders drawn to classic aviation subjects and compact 1:72 scale displays.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1/32 Spitfire Mk. Ixc, aircraft model kit

€134.99

The 1/32 Spitfire Mk. Ixc model kit brings one of the most recognized WWII fighters to the workbench in a scale that gives the aircraft real visual presence. Based on the Supermarine Spitfire Mk. IX, this assembly kit captures the version developed in response to the German Fw190A, when the earlier Mk. V needed stronger performance in combat. The subject connects the finished aircraft to RAF service and to the wider air war over Europe. A key part of that history was the Merlin Series 60/70 engine with a two-stage supercharger, introduced to improve performance and restore parity in battle. The kit also reflects the C universal wing associated with the most common Spitfire configuration, known for armament flexibility with 20 mm cannons and 7.7 mm machine guns. Reference material shown for the model depicts RAF camouflage, roundels, squadron code JE-J and serial EN398, giving the finished aircraft a specific July 1943 identity linked to Wing Commander J. E. "Johnnie" Johnson at RAF Kenley. Assembly is required, with a stated build time of 600 minutes. On the bench, the larger 1/32 scale supports careful work on paint boundaries, markings and surface finish. During the build, the aircraft moves from historical subject to a detailed display piece with the proportions, wing shape and livery that make the Spitfire instantly recognizable.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA RC assembly kit

€174.99

This 1:10 RC assembly kit brings the Alfa Romeo Giulia Sprint GTA Club Racer into a compact on-road format with a prepainted polycarbonate bodyshell, classic racing proportions and a 385 x 167 x 132 mm overall size. The 225 mm middle wheelbase and MR layout named in the data place the focus on a nimble, planted chassis setup for detailed scale driving. At the center is the MB-01 chassis, a compact 2WD platform designed around configurable drivetrain choices. Final gears and steering linkage can be reattached to change between front- and rear-wheel drive without removing the battery pack, motor or RC equipment from the center frame. For rear-wheel drive cars, the motor position can be set low or high, adding another tuning option within the same chassis architecture. The kit also uses symmetrical 4-wheel double wishbone suspension with friction dampers, plus unitized motor mount, final gear and suspension sections that simplify access during setup and maintenance. An electronic speed controller and 540 motor are included. On the bench, the prepainted body and included stickers support a club-racer inspired finish with less body preparation before assembly. On the road, the 60 mm front and rear tires suit the compact touring-car stance, and the data specifies 60D tires for tire changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Alfa Romeo Giulia Sprint GTA, RC assembly kit

€164.99

This 1:10 R/C assembly kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer on the MB-01 chassis, pairing classic touring car lines with a compact 2WD platform. The lightweight polycarbonate bodyshell captures the shape of the 1965 coupe in a format sized at 385 mm long, 167 mm wide and 132 mm high, creating a focused build that carries period racing character onto the track. A 225 mm middle wheelbase defines this version of the MB-01, with the motor mounted in a midship rear position for rear-wheel drive. The chassis design allows 3 wheelbase choices, and the drivetrain layout can be changed between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage while the battery pack, motor and R/C equipment remain on the center frame. Rear-wheel drive setups can also use a low or high motor position. The kit runs on 60 mm front and rear tires and uses 60D tires when replacements are needed. Stickers are included to create a club racer design inspired by amateur-driven competition cars. The 4-wheel double wishbone suspension and friction dampers suit smooth circuit running, while the unitized motor mount, final gears and suspension sections keep the mechanical layout easy to follow during assembly and maintenance. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€179.99

The Audi 90 quattro Racing arrives here as a 1:10 R/C assembly kit on the TT-02 platform, pairing classic 1989 touring car lines with a chassis layout built for controlled on-road running. At 446 mm long, 192 mm wide and 127 mm high, the finished model carries the broad fenders, deep front treatment and tall rear wing that defined the race machine's silhouette. The bodyshell is formed in polycarbonate and comes pre-painted in White PS-1 with Smoke PS-31 windows, so the main body finish is already in place before final detailing begins. Wheel arches are pre-cut and body mount holes are pre-made, which streamlines shell preparation while leaving the final finishing work to the builder. A 540 torque-tuned motor and electronic speed controller are included as part of the drive package. The 251 mm wheelbase gives the chassis the proportions used by many 1:10 on-road builds, and the included urethane bumper helps protect the bodyshell during close running. Radio gear, a battery pack and a charger are required separately. On a smooth indoor track or open asphalt space, the low touring car stance, slick tyre setup and 4WD drivetrain suit repeated laps, measured steering inputs and clean acceleration out of bends. The finished model also carries the visual character of the original Audi racer, making it equally satisfying between driving sessions on a shelf or workbench.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 BMW 318i STW, RC car kit, TT-01E

€164.99

The 1:10 RC BMW 318i STW brings a touring car silhouette into a build centered on the TT-01E platform, combining scale presence with radio control handling. As a kit, it suits builders who want the body, chassis and running gear to come together as a complete RC car rather than a display-only model. The BMW 318i STW designation gives the shell a clear motorsport identity, while the TT-01E layout anchors the mechanical side of the project in a widely recognized Tamiya chassis format. This pairing makes the model appealing both as a build subject and as a running car with a defined on-road character. The data identifies battery power and radio control operation, so the finished car is built for active driving rather than static shelf placement. Batteries are not included. On the bench, the kit format supports a measured assembly process that leads into body finishing and final setup. Once completed, the 1:10 scale format and RC control create a focused driving session on smooth surfaces, where the touring car shape and chassis-based construction come through in motion as clearly as they do during the build.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Fighter NXGEN DT-04, RC assembly kit

€159.99

The 1:10 Fighter NXGEN DT-04 is an RC assembly kit built around a newly designed 2WD rear-wheel drive chassis with the look of a full-size racing buggy. Multiple body panels connect to pipe frames, giving the model an open, competition-inspired shape, while the dimensions of 395 mm with the 265 mm wheelbase or 404 mm with the 280 mm wheelbase, 248 mm width and 120 mm height create a broad, planted stance. Its drivetrain layout places the motor at the rear and the battery pack inline in the chassis, a combination that directs weight toward the driven wheels. The sealed gearbox has a built-in gear differential for smoother cornering and added protection from dust and dirt. Side pontoons place the ESC on the left and the receiver on the right for a tidy internal layout. The 3-piece steering tie-rod is used here for the first time in this series, and rear damper attachment positions plus rear upper arms can be changed for setup tuning. Ribbed front tires and square spike rear tires split steering and traction duties clearly, while front hex hubs allow different wheels to be fitted. Battery changes stay practical at the track: turn the hood lever, remove the side pins, lift the roof and slide the driver figure forward to reach the pack from above. Many separately sold DT-02 and DT-03 parts are compatible for further setup changes. ESC and a Type 540 Torque-Tuned Motor are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Ford Escort MkII Rally, RC model kit

€199.99

The 1:10 Ford Escort MkII Rally RC model kit pairs a classic rally shape with the MF-01X chassis, creating a machine that looks at home kicking up dust on flat dirt or tracking cleanly across asphalt. Its clear polycarbonate body recreates the Escort MkII form with a lightweight shell, while molded ABS parts for the bumpers, side mirrors and fog lights bring extra definition to the exterior. Under the shell, the MF-01X layout uses a rear-mounted 540 Torque Tuned motor, a propeller shaft and gear differentials to drive all 4 wheels. The chassis frame combines a 3-segment structure with a 2-piece frame and gearbox housing, giving the running gear a compact, purpose-built layout. At 414 mm in length with a 239 mm L wheelbase, the model carries the long-wheelbase rally setup specified for this body. The chassis can also be converted to other wheelbase formats with separately sold parts, and it remains compatible with previous M-chassis bodies. An electronic speed controller is included. The decal sheet finishes the shell with sponsor logos and period rally graphics, while the front and rear light cases are compatible with separately sold 5 mm LEDs for an illuminated display or night-stage look. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Escort body and rally markings deliver strong historic motorsport character; on the ground, the 4WD layout and suspension setup support running across mixed surfaces.

Off-road RC cars

1:10 Ford F-150 Ranger XLT, RC model kit

€374.99

This 1:10 RC model kit brings back the Ford F-150 Ranger XLT as a reissue of the 1981 release, capturing the angular lines and pickup stance of the seventh-generation F-series in a 430 x 215 x 185 mm format. The ABS body is shaped with triangular side windows on the cab, and the stealth front body mount removes visible mounting holes at the nose for a cleaner scale appearance. Freshly moulded exterior parts add detail across the shell, including side mirrors, windscreen wipers, headlights, a front grille section and bumper protection. An updated decal sheet supports the period finish, and the body also carries a driver figure for a fuller cockpit presentation. Ford emblems are reproduced at the front and rear, reinforcing the character of the full-size truck. The complete model weighs 1880 g, giving the chassis and body combination a planted feel in motion. Under the shell, a 540 electric motor and electronic speed controller form the drive package, with electronics and the 7.2 V battery area covered by a transparent housing. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the pickup reads as a detailed vintage reissue; on the ground, the long body, rear sand tyres and 2WD layout suit loose-surface running with a classic off-road stance.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Land Rover Defender 90, RC assembly kit, CC-02

€294.99

The 1:10 Land Rover Defender 90 on the CC-02 chassis brings classic 1990 off-road styling into an RC assembly kit with clear scale character and cross-country hardware. At 429 mm long, 200 mm wide and 215 mm high, the 3-door body sits with the upright stance and short-wheelbase proportions that define this vehicle. Its 242 mm wheelbase matches the short CC-01S size, giving this version the compact layout associated with the Defender 90. Separately molded parts for the grille, side mirrors, light cases and outer roll gages add sharper definition to the exterior, while the polycarbonate body keeps weight down. The drivetrain sends power through short propeller shafts to front and rear differential gears, a layout that suits loose ground and uneven terrain. LED compatibility is built in as well, with space for 2 x 5 mm headlights and 6 x 5 mm rear LEDs. A wide range of Hop-Up Option Parts is available for the CC-02 chassis. This assembly kit suits bench building, body finishing and outdoor RC running as separate parts of the hobby. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3, RC assembly kit, TT-02

€159.99

The 1:10 Mercedes-AMG GT3 RC assembly kit pairs the dramatic shape of the GT3 race car with the TT-02 chassis, creating a build that stands out with a long hood, low roofline and prominent rear wing. Its transparent polycarbonate body captures the full-size car's competition form in a lightweight shell that takes paint and markings for a finished race-ready look. At 453 mm long with a 257 mm wheelbase, the model has the proportions of a modern GT racer, and separately molded side mirrors and rear wing parts sharpen that outline further. The body is designed for PS-63 Bright Gun Metal, with PS-55 Flat Clear applied on the outside to achieve the matte finish described in the kit data. Stickers and masking stickers are supplied for the car's markings and paint layout, supporting a cleaner, more defined result across windows, lights and body graphics. The TT-02 platform is built as an entry-level chassis with scope for tuning, and the available option parts line gives room to refine the setup over time. This kit suits workbench sessions focused on body finishing, decal placement and chassis assembly, then moves naturally into on-road running once the build is complete. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz 190 E EVO II, RC assembly kit

€174.99

The Mercedes-Benz 190 E 2.5-16 EVO II 1991 arrives here as a 1:10 RC assembly kit on the TT-02 chassis, pairing a classic DTM silhouette with a shaft-driven 4WD layout built for controlled on-road running. At 445 mm long, 184 mm wide and 137 mm high, the model carries the compact proportions and extended aero surfaces of the race car into a size that reads clearly on the track. The bodyshell uses 1.0 mm polycarbonate to form the over fenders, front spoiler, rear spoiler and large rear wing, while separate black ABS parts reproduce the side mirrors, front grille and emblems as distinct components. A 257 mm wheelbase gives the chassis a widely used touring car format, and the TT-02 layout is known for its straightforward shaft drive arrangement and stable footprint. Silver dish wheels and racing slick tires suit smooth surfaces, and the included stickers plus masking stickers support an accurate paint finish with the 1991 race livery. This setup suits bench assembly, body finishing and regular circuit sessions in equal measure, with the visual character of the DTM machine carrying through once the shell is painted and mounted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mini Cooper Racing, RC assembly kit, MB-01

€164.99

The 1:10 Mini Cooper Racing RC assembly kit combines a compact MB-01 chassis with the unmistakable shape of the classic Mini Cooper Racing. At 315 mm long, 167 mm wide and 140 mm high, the model brings short-wheelbase proportions and retro touring style together in a format that stands out on the bench and on the track. The clear polycarbonate bodyshell captures the car's compact 2-door form in lightweight material ready for finishing, while updated markings sharpen the period racing character. Beneath the shell, the MB-01 platform uses a 2WD layout and a 210 mm short wheelbase. The center frame keeps the battery pack, motor and R/C equipment layout in place while final gears and steering linkage directions can be changed to switch between front- and rear-wheel drive. For rear-wheel drive cars, low or high motor position can also be selected. Unitized motor mount, final gear and suspension sections keep the build organized and make maintenance more straightforward after running sessions. 8-spoke wheels paired with 60D radial tires complete the road-going stance, and the symmetrical 4-wheel double wishbone suspension with friction dampers supports composed cornering on smooth surfaces. An electronic speed controller and 540 motor are included. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 NISMO R34 GT-R Z-Tune, RC assembly kit

€234.99

The 1:10 NISMO R34 GT-R Z-Tune RC assembly kit brings the sharp lines of the rare 2-door coupe to the TT-02D drift chassis, combining detailed scale presence with a setup shaped for controlled sideways driving. The polycarbonate body recreates the widened fenders, vents and rear wing of the Z-Tune, giving the finished car a low, aggressive look on the track. At the center of the build is the TT-02D platform with a 257 mm wheelbase, shaft-driven 4WD layout and a protected drivetrain. A 540 SPORT TUNED motor and included electronic speed controller complete the drive package for responsive throttle input during drift sessions. The chassis specification also features 24 mm drift-spec tires, CVA oil dampers, full ball bearings and an aluminum motor heat sink. Window masking film is supplied for the body, supporting accurate paint separation on the glazing areas while the shell is finished. Numerous TT-02 option parts are available separately for further tuning. The kit, illustrated assembly instructions, electronic speed controller, 540 electric motor and polycarbonate body are included. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the model suits smooth indoor practice lines, marked parking-lot style layouts and display between runs, with the Z-Tune body shape giving every slide a distinctly motorsport-inspired silhouette.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan R91CP 1992, RC assembly kit

€179.99

The 1:10 Nissan R91CP 1992 RC assembly kit brings the long, low stance of a Group C racer into a detailed build with a polycarbonate bodyshell, separate black body accessories and a cockpit set with styrene driver figure. At 480 mm long, 204 mm wide and 109 mm high with a 280 mm wheelbase, the finished model carries the stretched proportions that define this endurance machine. The body is supplied unpainted, with included decals and pre-drilled body post holes that streamline shell preparation while leaving the final finish open to the chosen livery. Separate side mirrors, spoiler mounts, air intake and windshield wipers add layered exterior detail, and the light cases are moulded into the shell with no provision for LEDs. Underneath, the proven Group C Vintage platform pairs front and rear space frames with FRP plates in an ABS bathtub layout. The rear section uses a rigid axle, while the front end keeps its own independent movement for a layout that reflects classic RC circuit design. On a smooth track or a large indoor running area, the high-grip sponge tires and 5-spoke gunmetal wheels suit fast, flowing laps and stable corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR, RC assembly kit

€164.99

The 1:10 Porsche 911 Carrera RSR RC assembly kit brings classic racing shape to the TT-02 platform, pairing a detailed polycarbonate body with shaft-driven 4WD for controlled running on a proven chassis. At 457 mm long, 204 mm wide and 136 mm high, the model carries the low, wide stance of the original car while the integrated rear wing keeps the silhouette true to the RSR form. The TT-02 tub frame layout uses a central drive shaft to link front and rear drivetrains, and the front and rear cone differentials each use 4 bevel gears to distribute power across the axle. Toe adjustment at the front allows setup changes, while the battery compartment is designed to accept different battery types. Wheel width and diameter are 27/67 mm at the front and 32/67 mm at the rear, matching the slick tyre setup and the 251 mm wheelbase. The kit also contains a decal sheet, window masking film, an electronic speed controller and a 540 electric motor. Assembly and finishing shape the final look, with the unpainted body ready for the chosen livery and separate mirrors adding another exterior detail once fitted. On a smooth track or open paved space, the combination of adjustable gearing, independent suspension and all-wheel drive supports steady test runs, tuning sessions and repeat laps with the same chassis.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Quirkhopper, RC assembly kit, GF-02 4WD

€219.99

The 1:10 Quirkhopper brings an unusual buggy silhouette to the GF-02 platform, combining a slim polycarbonate body with gear-driven 4WD for confident running away from smooth tarmac. Its insect-like shape stands out immediately, and the low motor position in the centre of the chassis helps keep the layout balanced when the model changes direction on gravel, packed dirt or uneven ground. The GF-02 chassis uses a lightweight monocoque frame with ladder and tube motifs that give the structure a distinctive technical look. Power reaches the front and rear axles through gears, and separately available pinions allow 3 different gear ratios to tune the drive setup. An engine guard adds protection in off-road use, while the electronic speed controller is included in the kit. Front and rear axle differentials help the buggy track through bends with smoother wheel speed compensation across the drivetrain. Double wishbone suspension at all 4 corners works with 4 friction dampers to manage bumps and ruts during outdoor sessions. Radio gear, a battery pack, a charger and paints are required separately. On a garden track, compact dirt course or gravel path, the Quirkhopper combines scale building detail with lively off-road character.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RAYBRIG NSX Concept-GT, RC kit, TT-02

The 1:10 RAYBRIG NSX Concept-GT kit brings Super GT styling to the TT-02 platform with a 257 mm wheelbase and a detailed polycarbonate body. Low front bodywork, sculpted front and rear sections, and the race car profile give the finished chassis a focused touring car look on the bench and on the track. Separate parts recreate the rear wing and door mirrors, adding extra definition to the silhouette beyond the main body shell. Black 10-spoke wheels match the competition-style bodywork and support the model's race-inspired stance. Body markings are included for the livery, and masking stickers are supplied for the painting stage. The TT-02 layout is designed for straightforward maintenance, with the shaft-driven 4WD system arranged in a clean, accessible format. Radio gear and a battery pack are required separately. During the build, the body shell is trimmed, painted and finished with markings before mounting to the chassis, creating a hands-on modelmaking process as well as a running R/C car. Once assembled, the combination of the 540 Torque Tuned motor, enclosed driveline layout and touring car proportions suits regular circuit sessions, display between runs, and further tuning with TT-02 option parts available separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Subaru WRX STI, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Subaru WRX STI that won the SP3T class at the Nurburgring 24 Hours in May 2016, combining endurance-race character with the accessible layout of the TT-02 chassis. The lightweight polycarbonate bodyshell captures the aerodynamically optimized race form, and the see-through finish leaves room for a clean, detailed paint job. Separately molded side mirrors and rear wing add sharper definition to the shell, while the included stickers and masking stickers support an accurate recreation of the car's race markings. Gun metal mesh-style wheels give the model its competition look, and the slick tyres suit smooth running surfaces. The TT-02 platform is designed for straightforward maintenance and broad adaptability, which makes it a strong base for setup changes over time. An extensive line-up of optional TT-02 tuning parts is available for builders who want to refine the chassis further. On a paved circuit, the encapsulated 4WD system, independent suspension and 540 Torque-Tuned motor come together in a layout that suits repeated laps and steady control inputs. The kit contains the model, a detailed illustrated assembly manual, an electronic speed controller, a 540 electric motor and the polycarbonate body. Radio gear and a battery pack are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TT-02D Drift Spec Chassis, RC assembly kit

€149.99

The 1:10 TT-02D Drift Spec Chassis is an RC assembly kit built around a 4WD drivetrain, a central drive shaft and a tub frame layout shaped for low contact with the road surface. With a length of 376 mm, a width of about 182 mm and a 257 mm wheelbase in the standard setup, the chassis presents a planted stance for drift-focused running on smooth tracks and paved areas. Cone differentials front and rear use four bevel gears, while the fully ball-bearing drivetrain supports efficient power transfer from the included RS-540 Sport Tuned motor. An aluminum heat sink is included for the motor area, and the battery compartment is designed to accept all battery types named for this chassis format. Metal-plated brake disc-style wheel hubs in silver and a blue battery holder add distinct visual detail to the exposed layout. The chassis also allows a normal 258 mm setting and a short 252 mm wheelbase configuration, giving extra scope when matching the platform to different body fits and handling preferences. A separately sold body can be fitted to the chassis, making the platform suitable for custom drift builds with different shells and finishes. Radio gear, a battery pack and a charger are required separately for operation, so the kit can be completed around preferred running equipment.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 XV-02 PRO, RC chassis kit, shaft-driven 4WD

€374.99

The 1:10 XV-02 PRO RC chassis kit brings shaft-driven 4WD and a front mid-ship motor into a layout built for rally running and detailed setup work. Equal-length front and rear long propeller shafts support a balanced drivetrain arrangement, while the center-left longitudinal battery pack position helps distribute weight for controlled handling on mixed surfaces. Tuning depth sits at the core of this chassis. The kit comes with 2 39T differential gears and 1 40T differential gear, allowing front and rear drive balance to be altered by changing the gear combination at each end. Newly designed gears, a bathtub frame chassis, a chassis cover and 6-degree caster blocks define the updated structure, while suspension arms and front uprights are based on the XV-01 chassis kit. An aluminum servo mount is included, and new metal parts are used for the motor mount, propeller shafts, input and center shafts, plus the urethane bumpers. Long aluminum dampers work at both front and rear, and rally dish white wheels are matched with rally block tires for the intended running style. The polycarbonate chassis cover with wheel well liners helps limit dirt and dust entering the chassis during use on gravel and similar terrain. Radio gear, a battery pack, a charger and paints are required separately.

Model motorcycle kits 1:12

1:12 Ducati 1199 Panigale S, plastic model kit

€54.99

This 1:12 plastic model kit captures the Ducati 1199 Panigale S in 2014 specification, bringing the sharp bodywork, compact superbike proportions and technical layout of the original machine into a detailed bench build. The finished model balances full fairing surfaces with visible mechanical areas, so the motorcycle keeps its sleek silhouette while still showing the engineering that defines the design. The build centers on key motorcycle structures such as the monocoque frame, the L-twin 2-cylinder engine and the suspension layout. Small screws secure the engine cowling, which can be removed after completion to reveal the engine beneath rather than hiding it permanently behind the bodywork. The rear section uses a metal damper with a metal coil spring, adding a different material finish to the suspension assembly. Markings and paint guidance support either a red scheme or a matte black Dark Stealth scheme, with red rim stripes and detail callouts helping the wheels, forks and body panels read clearly at 1:12 scale. On the shelf, the completed motorcycle can be presented on the single sided stand or on the rear wheel box stand, changing the stance from parked road machine to paddock-style display. Assembly takes 600 minutes. Cement, paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda CBR 1000-RR-R Fireblade SP model kit

€52.99

This 1:12 Honda CBR 1000-RR-R Fireblade SP plastic model assembly kit turns Honda's circuit-focused superbike into a detailed display build with crisp bodywork, visible mechanical structure and race-inspired presence. At 176 mm long, 68 mm wide and 96 mm high, the finished motorcycle carries the low, aggressive stance of the full-size machine while fitting neatly into a shelf or cabinet display. The model recreates the bike's aerodynamic form with special attention to the side cowl area, where the internal winglets are rendered as part of the fairing design. A detailed liquid-cooled 4-cylinder engine sits at the center of the build, supported by the frame, front fork, swing arm and muffler layout highlighted in the kit design. The headlight is screw-attached, and the side and under cowl sections can be removed after assembly to change how the motorcycle is presented. Metal-plated parts are used for the mirror surfaces, adding a bright contrast against the painted bodywork and darker chassis areas. Textured semi-slick tires, tread patterns and 2 marking options give the finished motorcycle a purposeful road-and-track character. Masking stickers support cleaner paint separation on shaped surfaces, while the included racing stand lifts the completed bike into a paddock-style display setting. Cement and paints are required separately.

Model motorcycle kits 1:12

1:12 Honda Dax125 Tamiya Edition, model kit

€27.99

This 1:12 Honda Dax125 Tamiya Edition model kit captures the compact minibike stance of the full-size machine in a display scale that keeps the T-bone frame, long seat proportions and upright street-bike layout clearly visible. At 147 mm long, with a stated height of 67 mm and 103 mm in the source data, the finished build presents the Dax125 as a small-format motorcycle with distinct mechanical presence. The assembly breaks the bike into recognizable structures, with the engine, swing arm, front fork and muffler fixed to the frame by screws. Metal-plated parts are used for sections such as the muffler guard and side covers, giving those areas a separate finish from the surrounding components. A dedicated metal spring is supplied for the rear damper spring, and vinyl pipes reproduce accel wiring, the brake hose and the plug cord with finer line detail than rigid molded pieces. The kit also recreates the special helmet associated with the Tamiya Limited Edition styling. During the build, the molded blue, silver, black and clear parts help define the bike's layout before painting and detailing. Dedicated markings allow a choice between the normal version in pearl nebula red or pearl cadet gray and the Tamiya Limited Edition appearance. Paints and cement are required separately. On a shelf, desk or model display, the finished motorcycle brings together compact proportions, visible engine detail and road-bike character in a format suited to careful assembly and close-up viewing.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda NSR500 '84, plastic assembly kit

€67.99

This 1:12 plastic assembly kit captures the early Honda NSR500 '84 in the form that won the 1984 Italian GP, bringing one of Grand Prix racing's most unusual motorcycle layouts to the workbench. At 166 mm long and 52 mm wide, the finished machine has a compact display footprint while still leaving room for the distinctive bodywork, exposed mechanical areas and race-focused stance to read clearly. Honda developed the NSR500 around a more powerful V4 engine, and that engineering shift shapes the whole model. The kit reproduces the radical arrangement with expansion chambers mounted high and the fuel tank placed below the engine, creating the silhouette that set this machine apart in the 1984 season. The frame, swing arm and tank are rendered in aluminum tones, while the period racing livery combines white, blue and red body panels with a red front fender and black wheels. Small screws are used to attach fairings and the chamber cover, and the fuel tank is detachable. A metal spring is used in the rear suspension, and racing stand parts are included for display. During assembly, vinyl tubing is cut to measured lengths to represent fuel lines and wiring, adding another layer of mechanical realism around the engine and front section. The completed motorcycle suits shelf display, close-up inspection and careful finishing with paint and markings, especially for builders drawn to 1980s Grand Prix machines and technically distinctive race bikes.

Model motorcycle kits 1:12

1:12 Honda RC166 GP Racer 1960, motorcycle kit

€89.99

The 1:12 Honda RC166 GP Racer 1960 recreates a landmark Grand Prix motorcycle as a detailed assembly kit, centring the build on the distinctive air-cooled 6-cylinder engine and the long, lean proportions of a classic racing machine. Red and silver FRP cowling, large-diameter drum brakes and silver spoke wheels give the finished model the visual character associated with the original bike. Fine construction details carry the model beyond a simple outline. The wheel design uses super-thin 0.4 mm metal-plated ABS resin spokes, while solid rubber tires with a triangular tread pattern add texture at ground level. The engine area is shaped with crankcase and cylinder fin detail, and the full layout is supported by the 1:12 scale, which gives small mechanical parts room to read clearly once assembled. Assembly is required, and the stated build time is 600 minutes. Paints, cement and tools are required separately. On the bench, the kit suits a measured build pace with time for painting, detail work and careful alignment of the spoke wheels and body sections. Once completed, the Honda RC166 stands out in a display setting with its multi-pipe engine layout, racing fairing and compact 1960s GP silhouette.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Repsol Honda RC213V '14, motorcycle model kit

€57.99

The 1:12 Repsol Honda RC213V '14 captures the factory-works MotoGP machine from the 2014 season in a build focused on race-bike form, layered detail and authentic markings. Fairing lines, the merged front air intake duct and the compact tail section give the finished motorcycle the sharp stance of Honda's RC213V on the paddock stand. This assembly kit depicts a machine from the 1,000 cc MotoGP era, with the RC213V's aluminum double-tube frame and Honda 4-stroke V4 background reflected in the model's technical character. Separate parts shape smaller features with more definition, including the tail cowl-mounted camera, while the clear windshield section avoids cementing during that stage of the build. Parts to construct a racing stand are included, giving the completed motorcycle a display setup that matches pit-lane presentation. Assembly time is stated as 600 minutes. Paints and tools are required separately. During the build, masking stickers help with the multi-color finish, and the decal sheet brings the No.93 championship livery onto the fairing, tail and sponsor areas. Once completed, the model suits shelf display, motorsport collections and focused bench sessions centered on painting, decaling and final detailing.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Street Rider, plastic figure assembly kit

€18.29

Street Rider brings a relaxed motorcycle scene into the 1:12 Motorcycle Series with a plastic figure assembly kit shaped for realistic display beside street bike models. The sculpt uses 3D scanning techniques to capture natural facial structure, layered riding gear and the folds and creases of the jacket, hoodie, jeans and gloves, so the finished figure adds a convincing human presence to a parked bike or workshop setting. The kit supports 2 distinct character moments rather than a single fixed stance. One build shows the rider helmeted and pulling on his gloves, ready to mount the bike. The other shows him just off the machine, holding the helmet and wearing a wooly hat. Parts are also provided for either a half helmet or a three-quarter helmet, with optional sunglasses and a visor to refine the final look. This mix of pose and accessory choices helps the figure match different motorcycle styles, from everyday street scenes to more detailed diorama arrangements. Set on the screw-affixed base, the finished rider stands securely for shelf presentation, photo setups or placement next to a completed 1:12 motorcycle build. Paints and cement are required separately. Motorcycle models are sold separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki RGV Gamma XR89, motorcycle model kit

€33.99

The 1:12 Suzuki RGV Gamma XR89 captures the compact stance and full-fairing shape of a late 1990s racing motorcycle in a scale model kit built for careful bench work and striking shelf presence. With the 1999 #10 race livery named in the data, the finished bike brings together aerodynamic body panels, a single racing seat and the focused silhouette that defines a Grand Prix machine. This assembly kit is supplied as an unbuilt model, so the build itself is the central part of the experience rather than a short setup step. The stated assembly time of 600 minutes gives room for deliberate progress across the fairing, wheels and smaller finishing stages. Paints are required separately. The 1:12 scale also supports visible mechanical and styling detail without pushing the model into an oversized display footprint, which suits hobby spaces, desks and enclosed shelves. The motorcycle format adds a different rhythm from car or truck kits, with the narrow frame, race seat and streamlined bodywork shaping each stage of the build. On a shelf, in a hobby room or alongside other racing subjects, the Suzuki RGV Gamma XR89 reads clearly as a competition bike through its low profile and track-focused body shape. During the build, the named 1999 version gives the painting and finishing process a concrete reference, turning the completed model into a specific machine rather than a generic road bike.

Model car kits 1:12

1:12 Yamaha FZR750R (OW01), model kit

€35.99

The 1:12 Yamaha FZR750R (OW01) model kit brings a racing motorcycle icon into a compact format that suits both careful assembly and finished display. Its scale keeps the proportions readable on the bench, while the Yamaha FZR750R (OW01) designation gives the build a clear motorsport identity from the first parts through to the completed machine. As a model kit, the focus stays on the construction itself rather than on a ready-made result. The 1:12 format supports controlled painting, measured decal work and steady handling of smaller components during each build stage. This scale also makes it easier to study the motorcycle's lines at close range, with enough presence for shelf display once complete. Batteries are not included. On a hobby desk, the kit suits sessions built around assembly, painting and final presentation. Once finished, the motorcycle format and compact scale make it easy to place in a cabinet, on a shelf or alongside other vehicle models without demanding much space.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 3-Axle Reefer Semi-Trailer RC Kit

€499.99

This 1:14 reefer semi-trailer kit brings European long-haul freight styling into the Tamiya RC truck range with a 3-axle layout and a tall 310 mm refrigerated body. The finished trailer creates the look of a dedicated cold-chain hauler, with the front cooling unit, box proportions and road-going stance forming a convincing scale transport scene behind a compatible tractor unit. ABS body sections shape the trailer with clean, defined surfaces suited to a refrigerated box design, while the decal set carries the Deep Freeze Delivery and POLAR BEAR EXPRESS livery across the bodywork. The model focuses on the trailer itself rather than a full truck combination, making it a distinct build for existing 1:14 RC truck owners who want to expand a fleet with a different freight profile. The 3-axle arrangement changes the silhouette of the complete rig and adds the visual weight associated with European semi-trailer transport. Assembly is required. On a shelf, in a workshop or coupled to a matching 1:14 tractor unit on the road, the reefer trailer adds a clear commercial transport identity with its refrigerated theme and multi-axle format. It suits builders who want a dedicated trailer project and RC truck fans looking to recreate more specific regional loadout styles within a scale fleet.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Globe Liner Cab Over, RC truck kit

€484.99

The 1:14 Globe Liner Cab Over brings classic American cab-over truck styling into a large electric RC build with a strong visual presence on the road and on the shelf. At 500 mm long and 183 mm wide, the model carries the stretched proportions of a highway tractor, while chrome details and radial tyres reinforce the full-size look. The chassis uses a rear double axle drive, and rigid propeller shafts pass power to the back axles for smooth running. A 350 mm wheelbase and front and rear tread of 156 mm and 138 mm shape the stance, while the 22 mm tyre width at both ends keeps the look consistent across the truck. The 3-speed gearbox gives the build a more involved mechanical character, with ratios of 32.49:1 in 1st gear, 17.76:1 in 2nd gear and 10.66:1 in 3rd gear. At 2640 g, the assembled truck has the substantial feel expected from this scale and format. The Globe Liner suits measured driving sessions where the long wheelbase, multi-axle layout and shifting transmission can be appreciated in motion. It also stands out as a display model, with the cab shape, chrome wheels and classic truck proportions giving the finished build a distinctive presence. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Scania 770 S 4x2, RC assembly kit

€489.99

The 1:14 scale Scania 770 S 4x2 brings modern tractor truck styling into an RC assembly kit with a tall cab, detailed exterior equipment and a realistic 4x2 drivetrain layout. At 469 mm long, 193 mm wide and 315 mm high, with a 272 mm wheelbase, it has the road presence of a European long-haul trailer head when parked on display or coupled for running. The chassis places the motor and transmission at the front, matching the layout of the actual vehicle and giving the model its distinctive tractor truck structure. An aluminium frame supports the build, while new parts recreate the side skirts and auxiliary machinery for this version. The transmission offers 3 forward gear ratios of 1:32.49, 1:17.66 and 1:10.66, adding a mechanical shifting element that suits slow manoeuvres as well as higher-speed cruising. The cab can also be fitted with separately sold LEDs, and it is compatible with the Multi-Function Control Unit MFC-03 for light, sound and vibration functions. A coupler allows connection to separately available semi-trailers, opening up hauling scenes, reversing practice and scale truck line-ups. Radio gear, a battery pack, a charger and paints are required separately. The detailed cab, plated wheels and driver figure give the finished truck a convincing presence whether it is staged as a customised show tractor or driven through yard-style manoeuvres.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Scania 770 S 6x4, RC assembly kit

€559.99

The 1:14 Scania 770 S 6x4 brings modern long-haul truck presence into an RC assembly kit with a tall cab, detailed exterior bars and a full tractor unit stance that stands out on the bench and in motion. At 532 mm long, 193 mm wide and 307 mm high, the model has the size to show off the proportions of the S Series shape, from the high-roof cab to the rear coupling area behind the cab. Inside the chassis, the drivetrain follows the real vehicle layout with the motor and transmission positioned at the front and drive sent to the double rear axles. The ladder frame combines aluminum side channels with resin cross members, while the suspension uses metal leaf springs and friction dampers for a truck-style mechanical setup. Interior parts such as the dashboard and seats are included, adding visible cab detail through the glazing. The gearbox uses a constant mesh 3-speed design with gear ratios of 1:32.49, 1:17.66 and 1:10.66, and LEDs can be attached separately to extend the lighting detail. A coupler at the rear allows linkage with separately available semi-trailers, so the tractor unit can be used in articulated truck layouts as well as on its own. Radio gear, a battery pack, a charger and paints are required separately. A separately available Multi-Function Control Unit MFC-03 adds light, sound and vibration functions for an even more involved driving setup.

RC trucks

1:14 Scania 770 S 8x4/4, RC assembly kit

€949.99

This 1:14 RC assembly kit recreates the Scania 770 S 8x4/4 as a large-scale tractor truck with a commanding road presence and detailed heavy-haulage character. At 610 mm long, 196 mm wide and 320 mm high, the model has the size to show off the cab contours, multi-axle layout and the metallic TS-38 Gun-Metal finish across the pre-painted body parts. The cab is formed by precise injection molding and backed up by detailed rear equipment areas, including the auxiliary machinery tower, fuel tank and air tank. Numerous metal parts in the chassis reinforce the technical look, while the front-mounted motor and transmission sit within the ladder frame layout used for this truck platform. Interior parts such as the dashboard and seats are included, and a 1:14 scale driver figure adds another layer of scale detail inside the cab. Stickers and metal transfers are also included to complete the exterior finish. The model suits builders who want both mechanical interest and display presence in one truck. A separately sold Multi-Function Control Unit can be installed to add light, sound and vibration operation, and radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Fig. BW Tankcrew Leopard, plastic figure kit

€22.99

This 1:16 scale plastic figure assembly kit depicts a Bundeswehr tank crewman with 2 display options: 1 full-body standing figure and 1 torso figure for use in Leopard 2A6 models. Separate microphone and headset parts, plus clear goggle components, give the finished crewman a layered equipment look that stands out after painting and decal work. The standing figure can be mounted on the included display base, making it suitable for placement next to an armored vehicle model or as a focused figure study on its own. The torso figure is shaped for installation in a 1:16 scale Leopard 2A6 hatch position, where it adds a crew presence without requiring a full seated body inside the vehicle. Assembly is required, and the stated assembly time is 600 minutes. Decals for various insignia are included to refine the uniform with specific markings rather than relying on paint alone. On the bench, the kit suits careful painting sessions that bring out the camouflage uniform, helmet equipment and facial detail part by part. In a finished display, the standing crewman and hatch figure help turn a tank model into a more complete scene with visible personnel and a stronger sense of scale.  Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Ger. Infantry Man, figure assembly kit

€18.99

This 1:16 figure assembly kit depicts a WWII German infantryman in late-war camouflage, posed in action while aiming an MP40 with elongated stock. The larger scale gives the uniform, weapon and field equipment enough surface area for careful painting, so the finished figure reads clearly in a display case, on a shelf or as part of a military diorama. The kit contains 1 lifelike figure and uses separate parts for personal gear, which helps build up the layered look of a field loadout rather than leaving those details moulded into a single shape. Ammo cases, a gas mask case, grenade and shovel add distinct equipment points around the body and belt area. The reference material for the figure shows the placement of gear such as canteen, haversack, bayonet, leggings and lace-up boots, giving the build a strong historical silhouette. The late-war M44 camouflage uniform adds another level of finishing work through patterned clothing, straps and small equipment surfaces. On the workbench, the figure offers a focused project for builders who enjoy trimming, cementing and painting a single subject with more presence than smaller scales allow. Once finished, the combat stance and field gear make the model a natural fit for WWII figure displays, vehicle pairings or scene building with other 1:16 military subjects. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

RC tanks

1:16 Leopard 2 A7V, RC assembly kit, DMD T-12

€1,149.99

This 1:16 R/C assembly kit recreates the Leopard 2 A7V with a commanding 701 mm length, 241 mm width and 190 mm height, giving the model the long, low stance of the full-size tank. The L/55 120 mm gun and the sharply defined turret and hull surfaces are shaped from extensive research of the actual vehicle, so the finished build carries the same purposeful proportions seen on the real machine. The chassis uses ABS, while the gun barrel is aluminum for a crisp, straight profile across the full length of the turret. All-wheel independent suspension with torsion bars mirrors the layout of the original tank, and the suspension arms are die-cast. Pre-assembled tracks feature inserted rubber pads, adding a more planted feel as the model moves across hard surfaces. The DMD T-12 control unit expands operation with transmitter-based volume adjustment and a gun barrel control system that coordinates gun elevation and turret direction to keep the barrel trained in a single direction. Running functions come from 2 Type 540 motors, while turret rotation uses 1 Type 130 motor, gun elevation uses 1 TSU-03 servo, and recoil uses 1 Type 130 motor. Engine sounds are synchronized with model speed, and main gun or machine gun firing is accompanied by lights and sound through the DMD Multi Function Unit. The DMD control unit and battery pack are installed inside the turret, with a pin-attached upper turret for battery changes and a magnet-attached rear hatch for access to power and setup switches. Radio gear, a battery pack and a charger are required separately. Compatibility with the Battle System for 1/16 scale tanks also allows battle mode operation.  Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 Wehrmacht Tank Crewman, figure assembly kit

€15.49

This 1:16 figure assembly kit depicts a WWII Wehrmacht tanker with a sharply defined uniform, field equipment and insignia that give the finished build a strong historical presence. The plastic parts are molded to capture clothing structure and decorations with clarity, so painted highlights can pick out seams, medals and accessories across the full figure. The kit contains 1 figure and supports more than one finished look through optional parts. Two right arm versions and a choice of headgear change the stance and character of the crewman, while separate components add smaller equipment details to the torso and belt area. The sculpted accessories include the Iron Cross, a holster and binoculars, which create more visual layering once assembled and painted. Assembly is required, and the stated assembly time is 600 minutes. Paints are required separately. On the bench, the figure suits a measured build with trimming, fitting and painting stages that bring out the 1:16 scale detail step by step. Once finished, the crewman works as a standalone display figure or as a companion piece for larger military model scenes where uniform detail, pose choice and personal equipment help complete the setting.  Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 WWII German Infantryman Winter Figure Kit

€19.49

This 1:16 scale plastic figure assembly kit recreates a WWII German infantryman in reversible winter uniform, combining a clear historical subject with a compact build that leads to a detailed display figure. The finished pose, with MP44 assault rifle held in hand, gives the model a steady front-facing presence suited to a shelf, cabinet or diorama scene. The sculpt focuses on surface definition that rewards careful finishing. Realistic facial expression gives the head sculpt a distinct focal point, while the creases in the clothing provide natural lines for shading and paint contrast. Assembly is required, and the stated assembly time is 600 minutes. The kit is supplied as an assembly kit rather than a finished figure, so the build centers on fitting, painting and detailing the parts into a complete infantryman. Paints and tools are required separately. Additional field equipment strengthens the final look with accessories such as an ammo box, shovel and gas mask case, each contributing to the soldier's winter campaign appearance. On a workbench, the 1:16 scale offers enough area for careful brush painting and weathering effects. In a display setting, the realistic stance and layered uniform details help the figure sit naturally alongside military vehicles, terrain pieces or other scale subjects from the same period.  Warning! Not suitable for children under 14 years.

Model car kits 1:20

1:20 Seat Belt Set A, model accessory set

€7.19

The 1:20 Seat Belt Set A brings sharper cockpit detail to a 1:20 scale Grand Prix model by recreating the layered look of a 6-point racing harness. Belt graphics, logos and photo-etched metal fittings work together to turn a plain seat area into a period-correct focal point for builds based on cars from the early 1970s to the early 1980s. The set is arranged as a Detail-Up accessory for model makers who want more definition in the interior than moulded parts alone can provide. The etched sheet includes small buckle and mounting components that give the harness hardware a thinner, more realistic profile than solid kit parts. Decal and strap elements add colour and printed branding, with several visual styles available for different racing themes. Stainless steel photo-etched parts are shown for the hardware, while the harness graphics provide contrasting finishes that stand out against a dark seat or cockpit tub. Assembly is required, and the stated assembly time is 600 minutes. On a finished Grand Prix build, the completed harness can draw the eye toward the seat, side bolsters and surrounding controls, adding depth to open cockpit views and close-up display photography.

Model car kits 1:24

1:24 Castrol Celica, static model kit

€27.99

The 1:24 Castrol Celica captures one of rallying's standout early-1990s machines as a static display model kit, based on the Toyota Celica GT-Four RC that won the 1993 Monte-Carlo Rally. In 1:24 scale, the shape, livery and competition hardware come together in a compact replica that brings a World Rally Championship icon onto the workbench and into the display cabinet. The full-size car was powered by a 2 liter, liquid cooled in-line 4 cylinder DOHC turbo engine rated at 299 HP and 45.9 kg/m of torque, driving all 4 wheels through a 6-speed gearbox. Its electronically controlled torque splitter worked at a 50:50 front and rear balance in normal running and could shift ratios when surface conditions changed, a technical background that gives the model real motorsport context. The kit is designed as an assembly build and the stated assembly time is 600 minutes. Paints and tools are required separately. On the shelf, the rally winner's red and green Castrol markings, number 3 graphics and lamp-equipped front end create the look of a Monte Carlo night stage car waiting at the start line. During a careful build, the body, cockpit and underside details give each step a clear visual payoff, while the finished replica suits display alongside other 1:24 competition cars from the same era.

Model car kits 1:24

1:24 Castrol Toyota Tom's Supra GT, model car kit

€26.99

This 1:24 scale model car kit recreates the Castrol Toyota Tom's Supra GT from the 1995 Japanese GT Car Championship with the low, wide silhouette and competition livery that made the race machine stand out on the grid. The static display format keeps attention on the car's aerodynamic bodywork, from the enlarged fenders to the prominent rear wing and the additional intake and outlet shaping worked into the shell. The kit is designed as an assembly build and includes the parts needed for the model itself. A detailed cockpit, accurately reproduced chassis undersurface and suspension components give the finished car substance beyond the outer body, so the model reads convincingly from above, through the windows and from lower viewing angles. Solid synthetic rubber slick tires reinforce the race-spec appearance, while the 1:24 scale suits shelf display alongside other sports car subjects in the same size class. Assembly time is stated as 600 minutes. Cement and paint are required separately. On a worktable, the body, chassis and interior sections invite a measured build with trimming, painting and decal placement. Once completed, the Castrol Toyota Tom's Supra GT brings 1990s Japanese GT racing character to a desk, display cabinet or collection focused on touring cars and competition machines.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford GT, plastic model kit, static display

€53.99

This 1:24 Ford GT plastic model kit turns the modern supercar's low, honed shape into a detailed static display build. The finished model measures 200 mm long, 94 mm wide and 46 mm high, giving the aerodynamic form enough size to show the buttresses, door-side air tunnels and tightly drawn roofline with real presence on a shelf or workbench. The body uses a rear section breakdown that follows the structure of the actual car, and separate shoulder sections plus a separate passenger-side dashboard add more definition during assembly. A multi-splitter rear diffuser and realistic tire tread pattern sharpen the view from low angles, while decals, metal transfers and masking stickers support the paint finish and exterior markings. Assembly time is stated as 600 minutes. Cement and paints are required separately. The rear hatch leaves the top of the 3.5-liter V6 on display, so the plated oil tank and engine detail remain part of the finished view instead of disappearing under the bodywork. On a desk, in a display cabinet or alongside other 1:24 sports car builds, the Ford GT combines modern race-bred surfacing with detailed underbody and engine features that reward close inspection from every angle.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Ford Mustang GT4, plastic model assembly kit

€48.99

This 1:24 Ford Mustang GT4 plastic model assembly kit brings the 2019 spec race car onto the workbench with a sharply defined body, compact 203 x 81 x 60 mm dimensions and the unmistakable long-hood, wide-track silhouette seen in GT4 competition. The form was developed with extensive study of the real car, which shows in the balance of the front spoiler, rear wing and diffuser across the finished display model. The body surface carries the vented engine hood treatment, and the kit adds metal-plated mirror surfaces for the side and rear view mirrors to sharpen small exterior accents. Two marking options are provided with decals for car no.17 in gun metal or car no.18 in white, and masking stickers are included to support crisp separation during finishing. The interior and underside give the build more depth than the outer shell alone, with race-cockpit fittings and mechanical detail that keep the model engaging during assembly as well as on display. Assembly is required, with a stated build time of 600 minutes. Paints and cement are required separately. On a shelf, desk or display case, the completed Mustang GT4 carries the visual tension of a modern circuit car, while the detailed surfaces, cockpit features and race markings invite a slower look from front splitter to rear wing.

Model car kits 1:24

1:24 Honda S2000, plastic model kit, hard-top

€31.49

This 1:24 scale Honda S2000 plastic model kit captures the reborn front-engine, rear-wheel-drive roadster in a format that puts body shape, cabin detail and chassis structure at the centre of the build. The finished replica brings together the S2000's long nose, short deck proportions and wrapped headlight styling, creating a display model with the crisp stance of Honda's open 2 seater sports car. The body can be assembled in open form or with the hard-top installed, giving 2 distinct presentation options from the same kit. Inside the cabin, bucket seats, digital-style instruments and the red engine-start button recreate key details from the full-size car. The steering layout can be chosen as right-hand or left-hand drive, which adds a market-specific touch to the interior build. Underneath, the chassis undersurface and suspension are reproduced to extend the model beyond the body shell alone. Synthetic rubber tyres complete the road car look with a more realistic finish than hard moulded wheels alone. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. Once completed, the model suits shelf display, desk display or a place in a 1:24 sports car collection, where the white body, red cabin and bronze-style wheel finish shown on the reference build create a sharp contrast from every angle.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Lexus LFA V10 Roadver., plastic model kit

€82.99

The 1:24 Lexus LFA V10 Roadver. plastic model kit captures the low, sculpted shape of Lexus' supercar in a format that rewards careful building and close viewing. A completed length of 188 mm and width of 85 mm give the finished car a strong shelf presence, while the opening front hood adds a functional display feature that keeps the detailed V10 engine on view. The body can be assembled with the rear wing in either deployed or retracted form, and magnets make the wing parts interchangeable after the build is complete. That mechanism changes the car's profile in seconds and lets the same model alternate between a cleaner road-going look and a more aggressive high-speed stance. At the nose, photo-etched grille and mesh parts bring a finer edge to the intake area than molded pieces alone. Metal transfers pick out the mirror surfaces and emblems, while gloss metal-plated light cases and mat metal-plated wheels add contrast across the exterior finish. Synthetic rubber tires complete the road car look with a more realistic surface texture. This assembly kit suits a workbench session focused on body preparation, detail finishing and careful placement of small trim parts. On display, the interchangeable wing, visible engine bay and mixed surface finishes give the model different viewing points from front, side and rear angles.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Mazda MX-5 RF, plastic model assembly kit

€41.99

This 1:24 plastic model assembly kit recreates the 2017 Mazda MX-5 RF with the sleek Retractable Fastback shape that sets the RF apart within the MX-5 line. At 164 mm long and 80 mm wide, the finished car carries the low stance, short overhangs and tight proportions of the original into a display scale that still leaves room for fine exterior and interior detail. The kit depicts top grade Japan-market equipment such as Recaro seats and BBS wheels, adding trim details that suit the RF's more refined hard-top character. New roof parts and rear and side window parts support 2 distinct display configurations, with the hard top raised or lowered to change the whole silhouette of the car. Metal-plated components are used for light reflectors and other small trim areas, giving bright accents where painted parts would be harder to define. Decals cover instrumentation and further details, while metal transfers finish emblems and side mirror surfaces with a sharper look than printed markings alone. Assembly takes about 600 minutes and suits a measured bench session with painting and detailing stages spaced across several sittings. Cement and paints are required separately. Once completed, the model sits naturally in a display case, on a shelf beside other 1:24 road cars, or as a focused single-car build that highlights Mazda's RF roof concept.

Model car kits 1:24

1:24 Mitsubishi GTO Twin Turbo, plastic model kit

€26.99

The 1:24 Mitsubishi GTO Twin Turbo is a plastic model kit that turns the muscular shape of Mitsubishi's 4WD sports coupe into a focused scale build. The finished form brings together the low aerodynamic body, closed pop-up headlight covers, front air intake, fog light areas and a rear spoiler for a road car silhouette with strong period character. The kit develops that shape through separate body, chassis and cabin assemblies rather than a single simplified shell. The underside carries front and rear suspension detail, an exhaust system and wheel installation with marked tire rotation direction. Inside, the dashboard can be built in right-hand steering or left-hand steering form, and the center console uses dedicated variant parts. Paint callouts cover exterior trim, interior sections and metallic underbody details, while the body color chart lists finishes such as Passion Red, Grace Silver, Fiji Blue, Galaxy White, Lamp Black and Kutani Red. Assembly time is stated as 600 minutes. On the workbench, the sequence moves from trimming and cementing parts to painting, decaling and final fitment of the wheels and interior. Plastic cement and paints are required separately.

Model car kits 1:24

1:24 Morris Mini Cooper Racing, model car kit

€27.79

The 1:24 Morris Mini Cooper Racing captures the compact stance of a classic competition car in a model car kit that focuses on shape, proportion and hands-on assembly. In 1:24 scale, the small footprint suits display shelves, desk spaces and lineups with other historic racing subjects while keeping the character of the original car clearly visible. This kit is a non-powered car, so the appeal sits in the build itself and in the finished racing form rather than in motorized functions. The Morris Mini Cooper Racing designation points the model toward track-inspired styling, giving the body a more purposeful look than a standard street version. The 1:24 format also makes the model easy to place in a collection of classic vehicles, where compact dimensions help the car sit neatly beside other scale subjects without dominating the scene. Batteries are not included. On a worktable, the model supports a focused build session centered on aligning body sections and bringing out the lines of this well-known small racer. Once completed, the finished car suits display in a cabinet, on a shelf or as part of a lineup built around historic motorsport themes and compact British car design.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Nissan 300ZX Turbo, plastic model kit

€26.99

The 1:24 Nissan 300ZX Turbo brings one of Nissan's late-1980s sports car shapes into a full display model format, with a low-slung coupe body, rear spoiler and the distinctive roof treatment visible in the finished build. At 1:24 scale, the model suits shelf display while still leaving room for painted trim, interior work and careful exterior finishing. This assembly kit is built as a non-powered car, so the focus stays on shape, proportion and surface detail rather than running gear. The source material behind the model is the Nissan 300ZX Turbo, known for its aerodynamic body and performance-led design, and that character comes through in the long bonnet, wide stance and clean side profile. Assembly is required, with a stated build time of 600 minutes. Paints and tools shown in the reference material are not part of the kit. The included component is the assembly kit itself. On the bench, the model lends itself to a steady build rhythm of part preparation, body painting and final detail work. Once completed, the finished car works well as a display piece in a collection of Japanese sports cars, 1:24 scale road cars or late-1980s automotive subjects.

Model car kits 1:24

1:24 Nissan GT-R Streetversion, model kit

€70.99

This 1:24 Nissan GT-R Streetversion model kit brings the shape of the 2007 road car into a static scale build with a finished size of 197 mm in length and 82 mm in width. The body proportions, low stance and detailed exterior surfaces give the completed model a strong shelf presence, while the opening hood adds a second display option that changes the whole character of the car. Beneath that hood, the kit focuses attention on the GT-R's twin-turbo V6 layout with a highly detailed engine area and separately molded induction box parts. Those separate components create clearer edges between adjoining sections during painting and finishing, which helps mechanical details read more distinctly once assembled. Metal-plated treatment on the wheels, muffler and induction box parts introduces a brighter finish on selected components, so the completed build gains contrast between body panels and hardware. Assembly is required, and the stated assembly time is 600 minutes. On a worktable, the kit suits a measured build pace with time for trimming, painting and detail work across the engine bay and exterior parts. Once completed, the model fits naturally into a display lineup of modern sports cars, where the opening hood and plated components give different angles of the Nissan GT-R Streetversion their own focal points.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 934 Jagermeister, assembly kit

€52.99

This 1:24 assembly kit captures the Porsche Turbo RSR 934 in its Jagermeister racing livery, bringing the shape of the 1976 Group 4 GT car into a build that combines bold bodywork with competition detail. Wide fenders, a large rear wing and the low silhouette give the finished model the unmistakable presence of a classic turbocharged race car. The full-size Porsche Turbo RSR 934 was derived from the Porsche 911 Turbo and used a rear-mounted 2,994 cc turbocharged flat-6 engine with 260 hp. That racing background gives the model a strong historical anchor, and the kit reflects it through carefully rendered exterior lines and mechanical areas. The cockpit shows a bucket seat, steering wheel, dashboard instruments and a visible roll cage through the windows. Around the body, the front intake, hood vents, mirrors, number panels and sponsor markings build up the period competition look with crisp visual contrast. Assembly time is stated as 600 minutes, making this a substantial bench project rather than a quick snap build. The scope of delivery includes the kit, instructions and decor. Paints, tools and cement are required separately. Once completed, the model suits shelf display, close-up viewing of the underside and interior, or a place alongside other classic motorsport subjects in 1:24 scale.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Porsche 934 Vaillant Kremer Racing, model car

€46.99

This 1:24 scale model car captures the Porsche 934 in Vaillant Kremer Racing trim with a format that suits both hands-on assembly and finished display. The combination of the low competition silhouette and the period team livery gives the build a strong motorsport presence from the first fitted body section to the completed racer. The subject centers on the Porsche 934, a competition machine whose widened bodywork, pronounced arches and racing proportions define the look of the finished model. In this version, the Vaillant Kremer Racing decoration shapes the visual identity, bringing the car's track-era character into clear focus. As a non-powered car, the model concentrates attention on exterior form, painted surfaces and the placement of the racing graphics. That makes it well suited to builders who enjoy careful body preparation, crisp finishing work and the satisfaction of seeing a historic race car take shape at 1:24 scale. On a shelf, in a display cabinet or alongside other motorsport subjects, the completed car brings a distinct racing profile and team-specific appearance. The compact scale also makes it easy to place within a broader collection while still leaving room for the Porsche 934 lines and Vaillant Kremer Racing colors to read clearly.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Rally Mechanics Set, figure kit with accessories

€24.99

This 1:24 Rally Mechanics Set brings a rally service scene to the workbench with 5 figures and workshop accessories sized for 1:24 sports car models. The combination of 4 mechanics, 1 driver and service equipment creates the look of an active maintenance stop, whether placed beside a competition car on a display base or arranged as a full garage diorama. The figure selection covers several working poses, including kneeling, standing and under-car service positions, which helps build a scene with movement and clear task separation. White sprues provide the parts for a static assembly kit that can be painted and finished to suit the chosen vehicle and setting. Team markings for Subaru and Peugeot support rally-themed decoration, while the extra workshop parts add context around the figures rather than leaving them standing alone. The set is intended for builders who want to expand a vehicle display with crew activity, tools and service detail. Cement and paints are required separately. Placed around a 1:24 rally or sports car model, the completed crew can suggest wheel changes, inspection work or between-stage repairs without needing a large footprint. The mix of figures and equipment also suits shelf displays, competition dioramas and garage scenes where the car remains the centrepiece but the surrounding service action gives the model more presence.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru BRZ, scale model kit, steerable wheels

€56.99

This 1:24 Subaru BRZ scale model kit recreates the compact rear-wheel-drive sports coupe with crisp body lines, a low-slung stance and a finished size of 177 mm long by 84 mm wide. The assembly format turns the car's proportions and mechanical layout into a hands-on build, with the boxer-style Flat-4 engine and cabin details giving the model substance beyond the exterior shape. The full-size BRZ released in March 2012, and this kit reflects that modern coupe character with realistic detail across the engine bay, suspension and interior. Steerable front wheels make it possible to set the finished model at different display angles, which changes the look of the nose, wheel position and side profile without altering the bodywork. Parts for an optional rear spoiler add a second visual configuration to the tail section. Metal transfers are provided for mirror surfaces and manufacturer emblems, adding a sharper finish than molded detail alone. Window masking stickers support clean paint separation around the glazing. Paints, cement and tools are required separately. On a shelf, desk or in a display cabinet, the Subaru BRZ reads clearly as a modern front-engine sports coupe, with the underbody, cockpit and engine areas rewarding a closer look. The compact 1:24 format also suits focused bench sessions where body finishing, detail painting and final presentation matter as much as the completed car itself.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Subaru Impreza WRC 2001, plastic model kit

€34.49

The 1:24 Subaru Impreza WRC 2001 plastic model kit brings a World Rally Championship sedan into a compact display scale with bodywork shaped around the car's distinctive 2001 appearance. Small compound headlights, blister-style fenders, the extreme rear spoiler and the 4-door sedan form give the finished model a clear Monte Carlo Rally-era character. At 183.5 mm long and 75 mm wide, the completed car has enough presence for shelf display while still leaving room to focus on paint, markings and trim work. The shell is supported by interior detail that recreates the roll-cage and cockpit, so the build carries competition character beyond the outer body panels. Transparent red parts for the brake lights and clear orange parts for the turn signals separate these lighting elements from the painted body and sharpen the final finish. A mesh piece for the air inlet grill adds another material contrast during assembly, while the pre-painted gold wheels establish one of the defining visual cues of this Subaru rally machine. Markings are included for 3 drivers: Richard Burns, Petter Solberg and Markko Martin. Assembly is required, with a stated assembly time of 600 minutes. On the bench, the kit suits careful trimming, painting and decal placement; once completed, the 1:24 scale format and competition detailing make it a strong choice for motorsport displays centered on rally cars and early 2000s race subjects.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota Celica LB Turbo Gr.5, model kit

€30.99

This 1:24 scale plastic model assembly kit recreates the Toyota Celica LB Turbo Gr.5 with the stretched proportions and aerodynamic add-ons that made the racing car so distinctive. Wide fenders and a large rear wing shape the silhouette, while the finished dimensions of 192 mm x 87 mm x 52 mm give the model a strong shelf presence. The build focuses on visible race-car structure as much as outer form. Inside, the cockpit is rendered with a roll cage, and the underside carries separate chassis detail that stays interesting even after assembly. Suspension features are also reproduced, giving the model more to study than the body alone. Mesh wheels and solid synthetic rubber slick tires complete the competition look with the right contrast between spoke pattern and tire surface. Cartograf decals provide crisp markings, and the set also contains 1 driver figure plus 2 car numbers for a more defined finishing scheme. On the worktable, the kit suits careful painting, decal placement and detail picking across body, cabin and underside. Once completed, the Celica works equally well as a display model that rewards close viewing from the front, side and low rear angle. Paints and glue are required separately, and a manual is included.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Toyota G.R. TS050 HYBRID, plastic model kit

€58.99

The 1:24 Toyota G.R. TS050 HYBRID brings the 2018 endurance racer to the workbench as a plastic model kit with the low, sculpted form of the original car. At 194 mm long, 79 mm wide and 44 mm high, the finished model gives the TS050 HYBRID a compact display footprint while preserving the long front overhangs, enclosed cockpit and tightly packaged rear bodywork that define this prototype. The body reflects the 2018 specification with reworked aerodynamic parts inside and out, plus the longer front fenders and diffuser changes used on that version of the car. The interior is not left empty: the cockpit area shows the driver seat and the lithium-ion battery, so the hybrid race car layout remains visible beyond the outer shell. A metal-plated part recreates the silver roof section, and separate metal transfers are supplied for the side mirrors and headlight sections to give those small surfaces a cleaner finish than paint alone. Assembly is required, with a stated build time of 600 minutes. On the bench, the combination of body shaping, plated trim and race markings supports a focused paint and finishing session with clear visual progress at each stage. Cement and paints are required separately, and the included decals for the number 7 and 8 cars allow the completed model to be finished in either of the two 2018 race configurations.

Model aircraft kits 1:32

1:32 F-4J Phantom II Marines, aircraft model kit

€139.99

The 1:32 F-4J Phantom II Marines aircraft model kit brings a well-known carrier-based jet into a large scale that gives its shape, markings and external stores real visual presence on the workbench and on display. As a self-assembly kit, it turns the F-4J airframe into a hands-on build with fitted parts, illustrated guidance and room for an individual paint finish. The scope of delivery contains the kit, instructions and decals. Assembly is carried out with step-by-step illustrated instructions, which structure the process across the major airframe sections and support careful placement of the included markings. The 1:32 scale leaves space for the pointed nose, tandem cockpit canopy, swept wings, landing gear and Marines livery to stand out as distinct elements of the finished aircraft. Parts can be painted according to the reference scheme or finished with a custom approach based on the builder's own ideas. Tools, glue and paints are required separately. With an assembly time of 600 minutes, the build suits slower bench sessions as well as longer weekend work on subassemblies and finishing. Once completed, the model works equally well as a shelf display, a cabinet centrepiece or part of a larger aircraft collection focused on naval and Marine aviation.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:32

1:32 Mc Donnell F4 C/D PHANTOM II, model kit

€124.99

This 1:32 Mc Donnell F4 C/D PHANTOM II model kit captures the early Air Force F-4C and the upgraded F-4D in a format that gives the aircraft real presence on the bench and on display. The one-piece fuselage simplifies alignment across the main airframe, while the finished jet carries the long lines, swept wings and tandem cockpit that define the Phantom II silhouette. The build is supplied as an assembly kit with decals and instructions. Die-cast metal landing gear legs support the completed aircraft with a stable parked stance, and solid synthetic rubber tyres add another material contrast at ground level. The canopy and airbrake can each be set open or closed, which changes how the finished aircraft presents cockpit and airframe detail. Two crew figures are included for the cockpit, and the kit also provides a wide range of ordnance plus 3 marking options for different final looks. Tools, glue and paints are required separately. On the work surface, the parts layout supports a focused aircraft build with room for careful painting and marking placement. Once completed, the Phantom II suits shelf display, diorama settings or side-by-side comparison between an F-4C and an F-4D configuration built from the same subject.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Brit.SAS Land Rover, plastic model kit

€18.99

This 1:35 Brit.SAS Land Rover plastic model kit captures the Pink Panther patrol vehicle in a form shaped by long-range desert operations, with an open body, front-mounted spare wheel and a packed exterior that gives the finished model a purposeful field look. The subject is the long-wheelbase SAS conversion used from 1970, shown with the stripped windscreen-and-door layout described for this version. The build centers on a multi-stage chassis with transmission, propeller shaft, front axle, rear axle, leaf springs and exhaust routing, so the mechanical structure develops before the body and stowage go on. Several joints are specified to remain unglued during assembly, including shaft and wheel connections, which supports movable wheel rotation on the completed model. The kit also adds cockpit and rear-deck detail with seats, steering parts, levers, radio equipment, range finder parts and machine gun assemblies that can be mounted in different directions. The body is described as a special aluminium conversion, and the equipment fit reflects that patrol role with smoke dischargers at the corners, side-carried sand mats and external storage. On the bench, the 600-minute assembly time gives space for careful painting and finishing across the desert pink scheme, dark green alternatives and smaller detail callouts such as metallic grey, matt black and red brown areas. Assembly kit contents are included. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 British Infantry on Patrol, figure set

€11.99

This 1:35 scale figure set captures a British infantry patrol in motion with 5 soldiers shown in coordinated, natural poses. The group combines a squad leader, an ammunition loader and riflemen, creating a compact military scene that brings direction and narrative to a diorama base or vehicle display. Uniforms, webbing and field equipment are reproduced with close attention to expression and posture, so each figure reads as an individual while still belonging to the same patrol. The set covers key infantry equipment with Sten sub machine gun, Bren light machine gun and Enfield rifles, alongside haversacks and backpacks that add depth across the figures. A dedicated Bren Mk.II assembly step allows either an open or closed configuration, giving the machine gunner a distinct finishing detail. Assembly is required, with a stated build time of 600 minutes. Tools, cement and paints are not included in the kit. Placed beside a 1:35 vehicle, at the edge of a road section or moving through a field position, the figures create a clear sense of patrol movement rather than a static lineup. The varied roles and marching stances also suit standalone military miniature displays where equipment detail, pose variety and facial character carry the scene.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 BW MBT Leopard 1A4, plastic model kit

€23.99

The 1:35 BW MBT Leopard 1A4 is a plastic model assembly kit that captures the strong lines of the Leopard 1A4 tank, a version that entered production in 1974. Its spaced armor layout and 105 mm gun define the finished silhouette, giving the build a clear military profile with the long, low stance associated with this vehicle. The kit focuses on exterior detail that rewards careful assembly and finishing. The turret is equipped with features such as an MG3 machine gun and searchlight, which add structure and visual depth beyond the main hull form. A commander figure is also included, allowing the completed model to present a more active display appearance. Assembly is required, with a stated build time of 600 minutes. Kit, instructions and decor are included. Paints are required separately. On the workbench, the model supports a measured build with trimming, fitting and painting stages that gradually bring out the Leopard 1A4 character. Once completed, the 1:35 scale format suits shelf display, diorama settings or a military model collection where the tank's 1970s configuration and added turret details can be appreciated at close range.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Challenger 1 Mk.III, plastic model kit

€44.99

This 1:35 plastic model kit captures the Challenger 1 Mk.III with the long 120 mm main gun, side skirts and the broad turret shape that made the British main battle tank such a striking presence in the 1991 Persian Gulf War. The build is designed as an assembly project and suits display once completed. The subject can be finished to represent a vehicle used by British forces or by NATO troops, which opens different painting and marking directions within the same tank theme. Nylon mesh is supplied for the baskets around the turret, bringing a more scale-like look to an area that stands out clearly on the finished silhouette. Two realistic commander figures are part of the kit: one depicts a bescarfed commander in desert conditions, while the other shows a commander in NATO cold-climate uniform. The contrast between those 2 figures gives the turret hatch area a different character depending on the chosen version. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. On the workbench, the model offers a focused military build with room for careful painting, figure finishing and turret detailing. Once completed, the Challenger 1 Mk.III sits naturally in a 1:35 armor collection, whether displayed as a Gulf War vehicle or in a NATO-based lineup.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 DAK Luftwaffe Artillery Crew, figure set

€15.49

This 1:35 figure set brings an anti-aircraft artillery scene into sharper focus with 8 crew figures and a broad spread of field accessories. Officer, loader and gun crew poses create the look of an active emplacement, with figures carrying rounds, checking equipment, observing targets and coordinating the next step around the position. The parts depict soldiers in German tropical uniform attire and are intended for historically themed desert dioramas. Alongside the figures, the set provides armor-piercing rounds, explosive rounds, empty shell cases, ammo box racks, a rangefinder and hand tools such as a shovel and hammer. That mix supports more than a static lineup: ammunition can be staged in transit, stacked beside the gun or arranged around the crew to show preparation and sustained action. The set was previously available only as components in larger kits, making it a focused way to add crew detail and equipment density to a separate scene. Assembly is required, with a stated assembly time of 600 minutes. Cement and paints are required separately. On a display base, beside an 88 mm gun or within a wider North Africa layout, the figures and accessories help build a scene with command, loading and ranging tasks shown at the same moment.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Ger.Barrel & Jerry Can, model kit

€8.69

This 1:35 Diorama-Set Ger.Barrel & Jerry Can brings the logistics side of WWII scenes into focus with storage and transfer equipment used by German units for gasoline and drinking water. The assembly kit supplies 6 drums, 16 jerry cans, 2 stand pipes and 2 hand pumps, giving military miniatures the kind of ground detail that turns a vehicle display into a working supply point. The drums are shaped with the dual protective bands used for rolling and handling, and 2 drum lids are molded without fuel caps so pump-equipped versions can be built. Jerry cans follow the zinkanister form with central embossing and distinct cap detail, and the set also covers water-can variations marked with a white cross for quick identification in the scene. Period paint references in German gray, field gray and dark yellow support different theatre finishes, including African front subjects. Assembly time is listed at 600 minutes, reflecting a build that suits careful painting, weathering and placement across larger layouts. Placed beside trucks, tanks, workshops or supply dumps, the containers help suggest refuelling, storage and daily camp routines without dominating the main vehicle. Radio gear, a battery pack, a charger and paints are not part of this kit; adhesive and paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Motorcycle Orderly, model kit

€12.99

This 1:35 Diorama-Set Motorcycle Orderly model kit captures a focused WWII roadside moment built around the DKW NZ350 medium-sized motorcycle, a directional sign post and 2 military figures. The composition places one figure beside the post while the rider studies an opened map, giving the finished scene a clear sense of route guidance and field communication. The motorcycle itself offers rich molded detail in the suspension and engine area, with separate parts for the side bags and exhaust that give painters and builders more definition to work with across the finished machine. The 2 figures are sculpted with natural poses and realistic expressions, so the interaction between both characters remains readable without needing extra accessories or added figures. Normandy, France road signs are provided as printed cutouts for the post, bringing recognizable destination markings into the scene and helping anchor the display in a specific wartime setting. Assembly kit contents are included, while cement and paints are required separately. On a workbench, the set supports careful assembly, painting and weathering across the motorcycle, uniforms and sign details. In a finished display, the pointing officer, map-reading rider and roadside post create a compact diorama scene that fits naturally into 1:35 military collections and historical layouts.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Diorama-Set Soilder w/ Bicycle, assembly kit

€12.99

This 1:35 Diorama-Set Soilder w/ Bicycle assembly kit brings 2 German soldier figures and 2 bicycles into a compact military scene with enough detail to hold attention on a shelf or within a broader diorama layout. The combination of figures, cycles and field gear creates a grounded display image, whether the scene suggests movement along a road or a pause beside the route. The bicycles use separate handlebar and pedal parts, which gives the frame area more definition than a simplified one-piece build. Wheel spokes and seats are rendered as individual details that sharpen the look of each cycle at close range. The figures can be assembled in standing or cycling poses, and the instruction material indicates multiple pose choices before assembly. Field equipment mounts to the figures and bicycle, adding extra structure to the scene through packs, bedrolls and carried gear. Paints, cement and tools are required separately. On its own, the set forms a focused 1:35 display with 2 riders and their bicycles. Combined with other 1:35 military subjects, it can place movement, transport and human scale into a larger roadside, camp or patrol setting where the bicycles help connect the figures naturally to the environment.

Military figures & Accessories 1:35

1:35 Fig-Set Ger. Front-Line Soldiers, assembly kit

€11.99

This 1:35 plastic assembly kit recreates a 5-man group of WWII German front-line soldiers with animated poses that bring motion and tension into a military diorama. The set combines a noncommissioned officer, riflemen and a machine gunner, so the finished scene can show command, advance and covering fire within one infantry unit. The figures depict late-war uniforms, including camouflage smocks and M44 field uniforms, with painting references for pea pattern and oak leaf pattern camouflage. Armament spans an MG42 machine gun, 2 MP44 assault rifles, 2 G43 rifles, a Panzerfaust 60 and stick grenades, while smaller accessories such as binoculars, bayonets, pistol holsters, canteens, shovels and gas mask cases add depth across the figures. Facial expressions and body language are reproduced with lifelike character, and the sharply finished parts support careful brushwork on weapons, webbing and uniform details. Assembly is required, with an indicated build time of 600 minutes. Tools, cement and paints are required separately. Placed beside a 1:35 armored vehicle or transport half-track, the group can suggest an advancing escort, a roadside engagement or a defensive firing line. The mix of standing, kneeling and moving poses also suits a compact standalone display where the figures carry the scene through gesture, equipment and spacing alone.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Fig.-Set US Infant. W-Europe, plastic model kit

€7.19

This 1:35 scale plastic model assembly kit captures U.S. infantry in action in Western Europe during WWII with 8 figures that bring movement and period detail to a military diorama or shelf display. The set is built around a squad format, so finished scenes can show coordinated motion rather than a single static stance. The figure parts depict 1941 and 1943 issue uniforms, which allows visible variation across the group while keeping the overall look consistent for the same theater of war. Firearm parts include the M1 rifle and M1 carbine, and the accessory selection extends to holsters and packs for more individual loadouts. The instruction material shown for the set indicates multiple field-gear placements, including belt equipment, shoulder straps, pouches, canteens and entrenching tools, which helps shape each finished figure into a distinct battlefield role. Assembly is required, and the stated assembly time is 600 minutes. On a display base, the 8-figure format suits road-march scenes, defensive positions or advancing infantry compositions with more depth across the foreground and rear. The 1:35 scale also fits naturally into military miniature layouts where vehicles, terrain and troops need matching proportions for a coherent WWII scene.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Fren. Leclerc Series 2, plastic model kit

€64.99

The 1:35 Fren. Leclerc Series 2 plastic model kit brings the lines of the French main battle tank into a 306 mm build with a long, low silhouette and sharply defined armor surfaces. Molded plastic road wheels, clear light and periscope parts, and a commander figure give the finished tank a convincing mix of structure and focal detail on the shelf. The hull and turret reproduce the Leclerc Series 2 with variant-specific equipment such as smoke dischargers, stowage boxes, short and long snorkels, and an air conditioning unit. The French-developed 120 mm smoothbore gun is paired with a thermal sleeve, adding a distinctive centerpiece to the turret. At the rear, the engine grille, non-slip finish, tow cable, external fuel tank, fuel tank pipe stay and fuel tank stays extend the mechanical detail across the full vehicle. The commander's post features a rotating sight, adding another authentic handling element to the completed model. 4 marking options allow different finishing directions, with 3 schemes in 3-color NATO camouflage and 1 in desert colors. The markings represent French Army vehicles from France 2004 and Qatar 1998, giving the completed tank several historically grounded display identities. Cement and paints are required separately.

Military model vehicles 1:35

1:35 Fren. Tank R35, plastic model assembly kit

€31.49

This 1:35 scale plastic model assembly kit recreates the French Light Tank R35 with the compact stance, rounded hull and short-barreled 37 mm gun that defined the original vehicle. At 114 mm long and 55 mm wide, the finished model has a footprint that suits both focused bench work and display among other military miniatures. The lower hull reflects the rolled steel structure of the original tank, while the upper hull and turret shapes bring out the cast forms that gave the R35 its distinctive profile. The turret was crewed by 2 on the full-size vehicle, and the model preserves that tight, purposeful layout through its compact dimensions and exterior detailing. Builders can choose from 2 early WWII marking options, opening different finishing directions for camouflage and insignia. Cement and paints are required separately. The 600-minute assembly time points to a project with room for careful trimming, painting and decal placement rather than a quick snap build. On the workbench, the model suits measured assembly with attention to alignment, surface finish and historical paintwork. Once completed, the R35 sits naturally in a 1940 France setting, whether displayed as a single vehicle, paired with the commander figure, or placed into a broader 1:35 military collection with period markings and weathering.

Military model vehicles 1:35

1:35 Ger. Cargo Truck Krupp Protze, model kit

€34.99

This 1:35 scale Ger. Cargo Truck Krupp Protze model kit recreates the distinctive 6x4 light truck with its sloped engine cover and a finished length of 145 mm. The compact proportions and open cargo layout give the completed build a strong military transport presence in a display case or diorama scene. The body design draws on the early WWII Krupp Protze Kfz.70 personnel carrier, a vehicle known for its air-cooled flat-4 engine and low hood profile that improved forward visibility. Richly finished suspension, interior and rear cargo sections give the build substance across the chassis, cab and load bed rather than concentrating detail in only one area. Separately molded parts add more definition to the scene, including an MG34 with flak tripod, a Pz.B.39 anti-tank rifle and assorted tools. The kit also provides markings for 3 different vehicle versions, opening up different finishing directions across unit and vehicle identity. Assembly kit contents are supplied for builders aged 14 years and above, and cement and paint are required separately. On the bench, the model supports a focused build with painting, figure placement and accessory arrangement all contributing to the final result. Once completed, the truck sits naturally in convoy scenes, troop transport displays or broader 1:35 military collections where cargo, crew and vehicle detail work together.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Ger. Field Commander, figure kit, WWII set

€20.49

This 1:35 scale figure kit brings a WWII command scene into sharper focus with 5 German field commander figures posed for planning, communication and frontline coordination. A high-rank officer points out a target while holding a map, while the rest of the group expands the scene with a briefcase carrier, an armed commander, a low-rank officer checking a sidearm and a radio operator working beside field equipment. The set is molded as a plastic assembly kit and gives each figure a distinct role that supports more believable placement in military miniatures, vehicle displays and terrain builds. Uniform details follow the wartime field commander style described for coats, leggings and boots, while the weapons and carried gear add extra definition during painting. The MP40 and Luger P08 guns, along with the holsters, briefcase and radio, are finished with strong surface detail that helps washes, edge highlights and careful brush painting stand out. Assembly is required. On a roadside briefing scene, beside an armored vehicle or at the center of a larger battlefield layout, the 5-figure group adds direction and interaction rather than repeating the same stance across a display. Paints are required separately, and the set suits model builders who want personnel figures that can anchor a command post or complete a 1:35 historical diorama.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Marder I, plastic model assembly kit

€37.99

The 1:35 Ger. Marder I captures one of Germany's early tank destroyer conversions with the compact proportions of the Lorraine-based chassis and the distinctive bulging fighting compartment. As a plastic model assembly kit, it focuses on visible structure as much as outer shape, so the long 7.5 cm Pak40 installation and open upper section create a finished model with strong depth from almost every angle. Tamiya developed this subject through close study of a preserved vehicle at the Musee de Blindes, Saumur, and that research shows in the sharply rendered surfaces and layout. Rivet lines, weld seams and the compact hull geometry give the exterior a technical, layered look, while the interior adds the gun breech, sights, racks and radio equipment that remain visible inside the open compartment. The running gear is designed for a steadier build process, with assembly type tracks that use single-piece straight sections and bogies arranged with an ergonomic parts breakdown. Assembly is required, and the stated assembly time is 600 minutes. The finished vehicle suits display in a Normandy or Eastern Front setting thanks to 3 marking options, and the 2 included crew figures add scale and scene context beside the gun and fighting compartment. One figure can be placed with a choice of head parts, which adds another display variation while keeping the vehicle itself as the centrepiece.

Military model vehicles 1:35

1:35 Ger. Panther Ausf.D, plastic model kit

€59.99

This 1:35 scale plastic model assembly kit recreates the German Panther Ausf.D, the initial production variant of the Panther tank developed during World War II. The newly tooled design captures the vehicle's defining silhouette with sharply angled sloped armor and the long L/70 7.5 cm main gun, giving the finished build a strong, purposeful presence on the workbench or in a display case. Ausf.D-specific equipment is reproduced with close attention to the original vehicle, including the smoke dischargers and the distinct rear panel layout. Tamiya designers studied a real Panther in the Netherlands during development, and the kit uses advanced slide molding to reproduce turret details with crisp surface definition. The full-size Panther combined heavy armor protection with notable mobility, reaching a top speed of 55 km/h, and this model reflects that balance through its low, wide hull form and long-barreled turret layout. Belt type tracks help create a continuous track run, while the included commander torso and full body crew figure add options for a more active presentation. The 3 marking options allow different finishing directions, including a Battle of Kursk unit, making the completed tank suitable for a historically themed display. Assembly time is stated as 600 minutes. Paints and tools are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Sd.Kfz.7/2 8to Halbk.Flak37, model kit

€34.99

The 1:35 Ger. Sd.Kfz.7/2 8to Halbk.Flak37 model kit brings a WWII half-track and anti-aircraft gun combination into a format suited to careful bench work and shelf display. Its subject matter pairs the long, purposeful stance of an 8-ton half-track with the prominent Flak37 mounting, creating a build that stands out through its layered military vehicle structure. Within the 1:35 scale category, this designation points to a compact military replica that invites attention to the relationship between towing chassis, track-and-wheel running gear and the elevated gun position. The Ger. Sd.Kfz.7/2 name signals a specific vehicle variant rather than a generic transport, which gives the finished model a more defined historical character. Because this is a model kit, the central activity is the construction itself, with the form of the vehicle emerging step by step through assembly rather than arriving prebuilt. On a workbench, the subject offers a clear focal point for builders who enjoy military vehicles with visible mechanical contrast between front wheels, rear tracks and mounted artillery. Once completed, the 1:35 format also suits placement in a display cabinet, on a diorama base or alongside other WWII scale builds where the half-track configuration adds variety to the line-up.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2), plastic model kit

€43.99

This 1:35 plastic model kit captures the early German Sturmgeschutz III Ausf.G with the low, turretless silhouette that made the vehicle instantly recognizable. The fighting compartment sits on the Panzer III hull, and that compact layout gives the finished build a purposeful profile that stands out on a shelf or within a WWII diorama. Assembly is required, with a stated build time of 600 minutes, making this a substantial project centered on structure, surface detail, and historical configuration. The kit allows one of 2 gun layouts to be selected before construction begins: a 7.5 cm assault gun or a 10.5 cm howitzer version. Instruction details show separate running gear, road wheels, idler wheels, drive sprockets, gun mantlet, roof plate, cupola, smoke dischargers, Notek light, tow cables made from 14 cm string, and glue-type tracks that are joined during construction. Schurzen side armor supports and panels are also part of the build, shaping the vehicle's later-war side profile. The finished model suits static display, historical scene building, and careful painting work around the hull equipment and markings. Two crew figures in relaxed poses, one feeding and one holding a puppy, shift the scene away from a purely mechanical subject and add a quieter moment beside the armored vehicle. Cement, tools and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. SdKfz.161/1 Panzer IV H, plastic model kit

€43.99

This 1:35 scale plastic model kit captures the German SdKfz.161/1 Panzer IV H Early Version with the proportions and equipment that defined one of the most widely produced tanks of the Second World War. The long 48 caliber 75 mm gun and the Schurzen mounted around the hull sides and turret give the finished vehicle its unmistakable late-production profile, creating a display piece with strong horizontal lines and layered armor detail. The kit is designed as an assembly project and includes alternate hull front plates plus 2 types of sprocket wheels, allowing the build to reflect different production periods of the Ausf.H. That choice adds historical variation directly into the construction rather than limiting the model to a single fixed configuration. A tank commander figure wearing a winter issue jacket is also included, bringing scale contrast to the turret opening and adding character to the completed scene. The plastic format supports crisp molded detail across the exterior surfaces, from the gun installation to the armor panels and running gear. With an assembly time of 600 minutes, this model suits a bench session built around careful fitting, finishing and painting. On a shelf, in a military vehicle lineup or as part of a diorama setting, the completed Panzer IV H carries presence through its long gun barrel, side armor and period-specific configuration options.

Military model vehicles 1:35

1:35 Ger. SdKfz.232 Scout Car, model kit

€62.99

This 1:35 scale model kit recreates the German Sd.Kfz.232 scout car in its North Africa configuration, pairing the angular 8-wheel armored car with the prominent frame antenna that set the radio-equipped vehicle apart in reconnaissance service. At 193 mm long, the finished build has a substantial presence for military miniature displays, with the long upper antenna structure and turret armament giving the silhouette its distinctive character. The kit represents a vehicle type used for scouting duties and long-distance communication, and the subject matter is supported by detail parts that strengthen the historical look. Photo-etched components reproduce fine protective sections with sharper definition than standard molded parts, while the aluminum barrel gives the 2 cm gun a clean, straight finish. Exterior equipment such as early jerry cans and tools adds lived-in field detail across the hull. Decals provide 4 marking choices drawn from North Africa, the Balkans and Kursk, opening different display directions around the same vehicle type. Two figures are included to build a more active scene around the armored car, whether placed as a patrol halt, a roadside observation moment or part of a wider 1:35 diorama with other period vehicles. Cement and paints are required separately.

Military model vehicles 1:35

1:35 Ger. SdKfz.251/1 Halftr.Per.Car., plastic model kit

€33.99

This 1:35 plastic model kit recreates the German Sd.Kfz. 251/1 Ausf.D half-track armored personnel carrier, a vehicle used in WWII transport and support roles. The distinct body shape of the Ausf.D version is paired with an open-top fighting compartment, so the finished build presents both the exterior lines and the interior structure clearly on the shelf or within a diorama. The kit is designed for assembly and depicts interior features such as the seating layout and wireless radio, which give the compartment a more convincing operational look once painted. Weapons including a Panzerfaust and an MG42 machine gun are also part of the kit, adding historically themed equipment for scene building. The rear gate can be shown in either open or closed position, which changes the character of the finished model and supports different staging choices. Assembly time is stated as 600 minutes. Kit, instructions and decor are included. With 4 posed figures, the scene can be arranged as a moving carrier, a halted transport section or a command moment under field conditions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger. Sturmtiger 38cm RW61, plastic assembly kit

€52.49

This 1:35 Sturmtiger plastic assembly kit brings one of the most distinctive late WWII armored vehicles to the workbench, combining the Tiger I hull with a massive 38 cm RW61 rocket launcher and a short, heavy superstructure shape. The finished model captures the compact proportions and imposing stance that made the original vehicle stand out on the battlefield. Surface detail and running gear work together to give the build its weighty character. The tracks are reproduced with a realistic sense of heaviness, while the hull layout leaves room for mounted tools, armor forms and the squat fighting compartment that define the Sturmtiger silhouette. Assembly is required, with a stated build time of 600 minutes. The main hatch on the superstructure can be built in either the open or closed position, which changes the look of the finished model without altering its core form. The set also provides moving elements that stay adjustable after assembly, adding extra handling interest once the model is complete. On a shelf, in a diorama, or alongside other 1:35 military subjects, the included figure and 4 rockets help frame the vehicle in a more complete scene. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Ger.Engine Maint.Cr.(2), Diorama Set

€16.29

This 1:35 Diorama Set Ger.Engine Maint.Cr.(2) centers a WWII German maintenance scene on a Maybach HL230 engine and 2 engineer figures in overalls, giving a military display a clear workshop focus instead of a simple parked-vehicle layout. The assembly kit is designed for model builders who want technical context around Tiger I, Panther or King Tiger subjects. The HL230 was the engine used in those tanks, so the included powerplant parts create a historically grounded service scene with a recognizable mechanical subject at its center. Around it, smaller accessories shape the setting into a working area: tools, toolboxes, an oiler, a burner, a drum can, a ladder and additional service parts help break up the ground space with believable maintenance detail. The 600-minute assembly time points to a build with enough separate elements to reward careful painting and placement. On a shelf, in a display case or as part of a larger armored vehicle scene, the set supports compositions built around open engine decks, workshop corners or field repairs. Plastic cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Ger.Pioneer & Goliath Set, model kit

€19.29

The 1:35 Ger.Pioneer & Goliath Set brings a compact military engineering subject into scale form with 3 assault pioneer figures and parts for 2 Goliath tracked vehicles. The low, cable-guided carrier and the coordinated figure poses create a tense battlefield scene, with one operator handling the controller while the team advances under cover. This assembly kit is based on the Goliath, a diminutive tracked vehicle developed for remote demolition work. On the original vehicle, 3 cables spooled out from the rear to control movement and detonation, a mechanism that gives the subject its distinctive identity among World War II military miniatures. The full-size machine measured about 1.5 m in length and could carry up to 60 kg of light explosives. A total of 7,564 were produced across 12V battery and gas engine-powered versions, and the type was deployed by assault pioneer units on multiple fronts, including German operations in Normandy. Cement and paints are required separately. The set suits builders who enjoy combining vehicles, figures and historical context in one display. The 3+2 composition supports a small diorama with scouting, control and covering-fire poses, whether placed on a simple base or worked into a larger World War II scene with terrain and field details.

Military figures & Accessories 1:35

1:35 German Field Kitchen, plastic model kit

€18.99

This 1:35 plastic model kit captures the German Field Kitchen used to serve meals to non-mechanized WWII units such as infantry. The build centres on a field cooking trailer with a separate limber, creating the distinctive towed layout associated with mobile food service behind the lines. The detachable limber and trailer allow the finished model to be shown coupled for transport or separated for a camp setup. Wooden wheels and the flue are rendered with a rich finish that gives the structure more visual depth once painted. A seated soldier figure is included on the limber holding leashes, and the horse figure completes the towing arrangement with a clear handling scene. Smaller accessories including milk pots, food containers and a bucket extend the setting around the kitchen and support a fuller diorama composition. On a shelf, in a military vehicle collection or as part of a wider 1:35 WWII scene, the model adds a support subject that contrasts with combat vehicles and artillery. Paints and glue are required separately, and the manual is included.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 German Tank Crew Set, figure model kit

€19.99

The 1:35 German Tank Crew Set brings crew activity and command detail into armor scenes with 8 figures arranged as 4 full-body figures and 4 torso figures. Realistic poses turn a finished vehicle or diorama into a more convincing moment, from hatch positions and observation stances to map reading and signaling. The figure selection supports several crew roles, including binocular observation, radio communication with a headset, command gestures and route planning around a map. Torso figures are suited to placement in hatches or other vehicle openings, while the full-body figures expand ground placement around tanks and armored vehicles. Rank insignia decals add uniform markings for caps, collars, sleeves and chest details, and the instructions show decal placement and paint references for historically styled finishing. Assembly is required, with an indicated assembly time of 600 minutes. Cement and paints are required separately. On a display base, the kneeling figures can frame a planning scene beside an armored vehicle, while the torso figures help populate turret and hull openings with a more natural crew presence. Combined with compatible 1:35 armor kits, the set supports scenes focused on reconnaissance, coordination and battlefield movement rather than a vehicle shown on its own.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Hummel Late Production, plastic model kit

€60.99

This 1:35 scale plastic model assembly kit captures the Hummel in its late production form, pairing the long 15 cm howitzer with the open fighting compartment and integrated driving compartment that define this version. At 190 mm long and 84 mm wide, the finished model has a substantial footprint that shows off the hybrid chassis layout and the thin armor plates around the gun position. The build focuses on details that give the vehicle its artillery character. The gun mount combines the sight and elevation movement, so the aiming arrangement changes together as the barrel is adjusted. The late production track layout uses one-piece straight sections along the upper run to depict natural sag with a crisp, even line. The kit also represents the Hummel's open interior layout, where the fighting compartment, gun controls and loading area remain visible once assembled. Assembly is required, and the stated assembly time is 600 minutes. For display, the kit comes with 3 figures shown loading shells, which helps create an active crew scene around the vehicle rather than a static parked pose. Two marking options are included, covering Eastern Front and Western Front vehicles, so the finished model can be styled in different 1944 settings. Cement and paints are required separately.

Other model kits

1:35 Livestock Set 2, diorama model kit

€13.99

This 1:35 Livestock Set 2 brings 8 animal figures into diorama building with a mix that covers both farm and domestic settings. The assembly kit depicts a cow, horse, pig, 2 sheep, and 3 dogs, creating natural scene links for rural roads, barns, courtyards, and roadside pauses around military or civilian models. The animal selection gives each placement a different role inside a display. A horse can anchor a stable or field edge, while the pig and sheep help fill pens, yards, or open ground with believable scale detail. The 3 dogs are modeled as a doberman, golden retriever, and basset hound, so each adds a distinct body shape and stance rather than repeating the same figure. This spread of species supports more than one scene type within the same 1:35 collection. Cement and paint are required separately. On a farm diorama, the figures can be grouped into a compact livestock scene or spaced across fences, tracks, and building entrances to guide the eye through the layout. In a roadside or village display, a single cow or dog can change the mood of the setting by introducing a quiet everyday moment beside vehicles, figures, or structures.

Military model vehicles 1:35

1:35 Schwimmwagen Type 166, plastic model kit

€23.49

This 1:35 scale plastic model kit recreates the Schwimmwagen Type 166 with wide tires in a compact 113 mm long, 42 mm wide format that suits both focused bench work and finished display. The body shape is based on extensive research into the original vehicle, giving the amphibious design, low stance and exposed details a convincing historical look once assembled. Mechanical areas receive close attention through the realistic suspension and the 4-cylinder petrol engine, which add structure beneath the body and in the rear section. Newly molded C-parts sharpen the build with 200 mm wide tires, separate wheel details and a windshield that can be built with or without its cover. Equipment mounted on the cross member includes an MG 34, a Panzerfaust 30 and a Kar. 98k, while the tire construction is split into parts to reproduce the tread profile with more definition. The decal sheet provides 4 Wehrmacht license plates, 2 Luftwaffe license plates and uniform badges for cap, sleeves and collar. Two figures, a driver and an officer, extend the kit beyond the vehicle itself and open up diorama layouts with other military models. Canteens and a helmet can be positioned as desired, allowing small changes in how the finished scene reads on a shelf or in a larger display. Tools and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Sd.Kfz.222, military model kit, WWII

€32.99

This 1:35 scale military model kit recreates the WWII Sd.Kfz.222, a compact German 4WD armored car known for its angular welded armor and open-top turret. At 134 mm long and 57 mm wide, the finished model has a compact display size while still leaving room for sharply defined exterior equipment, turret structure and hull lines. The subject itself brings strong historical character to the bench. The original vehicle used fully independent suspension, optional 4-wheel steering and reached speeds of up to 90 km/h, details that explain the purposeful proportions of the design. Tamiya equips this kit with photo-etched hatch parts for finer mesh detail and a turned aluminum barrel for the 20 mm main gun, giving key focal areas a more scale-accurate finish. New decal markings based on updated historical research support a more specific final presentation, and assembly is stated at 600 minutes. One figure is included, along with Jerry cans and drum cans that can be arranged for scenic display work. The finished Sd.Kfz.222 suits a shelf display, a WWII vehicle lineup or a diorama scene with crew and field equipment. Builders can place the figure in the turret opening and use the extra cans around the vehicle to create a patrol, staging or maintenance setting with more visual context.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Sherman Easy8 EuroTheater, tank model kit

€52.99

The 1:35 Sherman Easy8 EuroTheater assembly kit recreates the WWII M4A3E8 with the broad stance, large turret and 76 mm gun that define the Easy Eight silhouette. At 214 mm long and 86 mm wide, the finished tank has a substantial display presence while keeping the proportions of the original vehicle clear from hull front to rear deck. This almost entirely newly designed kit uses slide-molded turret and upper hull parts to combine clean assembly with sharply rendered form. Cast metal turret texture and welded hull surface texture are reproduced directly in the molding, giving painted finishes more depth across the armor plates. Clear parts are used for the light lenses and cupola vision blocks, adding contrast to the surrounding surfaces. The rear section carries detailed engine grilles and exhausts, and separate parts depict details such as the periscope on the hatch underside. Belt-type single-pin T66 tracks simplify the running gear build while preserving the look of the original track pattern. Modelers can choose open or closed hatch positions to shape the final scene, whether the tank is shown buttoned up or crewed in action. A commander torso figure fits the cupola, and 2 marking options support different finishing directions for a European Theater vehicle. Assembly time is stated as 600 minutes. Paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 T-55 Enigma, model kit, Iraqi main battle tank

€45.99

The 1:35 scale T-55 Enigma model kit recreates the Iraqi up-armored main battle tank with the striking extra armor layout that gave this variant its unmistakable profile. At 259 mm long and 109 mm wide, the finished model carries the low, broad stance of the original vehicle and brings strong presence to a shelf, display case or historical diorama. The build focuses on the details that set the Enigma apart from a standard T-55. Additional armor blocks on the turret and hull define the look, while the turret armor frames are molded separately to bring out more structure in this prominent area. Hull armor blocks are molded with their frames, keeping this section straightforward while preserving the layered appearance of the added protection. Belt-type tracks complete the running gear and reinforce the characteristic tank outline from front idlers to rear drive area. A commander figure adds a human reference point and opens up display options, whether the finished tank is shown as a standalone centerpiece or placed into a 1991 Gulf War scene. Glue and paints are required separately, and the manual is included. The result is a military model kit with a distinctive combat-era configuration and a shape that stands apart clearly within 1:35 armor subjects.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 US 10-in-1 Cartons WWII, detail-up kit

€4.29

This 1:35 detail-up kit recreates U.S. 10-in-1 ration cartons from the WWII period, bringing a specific supply element into military dioramas, vehicle loads and camp scenes. The cardboard sheet format focuses on printed packaging detail, with markings for the outer sleeve, the main carton and the inner boxes that build into compact accessories with a convincing period look. The 10-in-1 ration was supplied to U.S. troops from 1943 to 1945, and each sleeved carton contained 4 individual boxes representing a day's rations for 10 soldiers. That historical structure gives the finished cartons a clear role in depot, transport and field-support settings rather than serving as generic cargo. The sheet also carries a basic explanation of the 10-in-1 ration in English and Japanese. Assembly is required, with a stated assembly time of 600 minutes. Across a bench setup or within a finished display, the cartons can be arranged as stacked stores, opened supplies or unpacked scene details beside compatible WWII-era U.S. subjects. The repeated set count on a single sheet supports consistent detailing across multiple vehicles, figures or base sections while keeping the scale appearance uniform.

Military model vehicles 1:35

1:35 US M151A2 Ford MUTT, plastic model kit

€13.49

This 1:35 plastic model kit captures the US M151A2 Ford MUTT in a TOW missile carrier configuration, pairing the compact military vehicle with the M220 tracking system for a display subject with clear mechanical presence. The open body, raised launcher layout and field equipment details give the finished build a purposeful silhouette that stands out in a military collection. The kit contains parts for 1 vehicle and supports more than one configuration drawn from service use. Army Version and Marine Corps Version builds are provided, with the Marine Corps type using different front-end and pipework details. A tripod is also included, allowing the TOW system to be presented in a dismounted setup beside the vehicle. Missile markings such as FOR TRAINING USE ONLY add another layer of finishing accuracy, while the painting guide covers multiple military schemes and unit markings. With an assembly time listed at 600 minutes, this subject suits model builders who enjoy a longer bench session shaped by fitting, painting and final display choices. Cement and paints are required separately. The completed scene can be arranged as a mobile launcher, a parked support vehicle, or a field position with the TOW system deployed off the MUTT.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M24 Chaffee Euro Theater, model kit

€38.99

The 1:35 US M24 Chaffee Euro Theater model kit brings a compact World War II light tank into a build centered on scale detail and historical setting. The Euro Theater designation gives the subject a defined late-war context, so the finished M24 Chaffee carries a more specific identity than a generic armored vehicle. Within the 1:35 format, the tank's proportions lend themselves to a focused bench project and a display size that works well in military model collections. The M24 Chaffee is known for its lighter class and lower profile, which gives this subject a distinct silhouette compared with heavier armored vehicles from the same era. That combination of scale and vehicle type supports careful painting, weathering, and scene planning around a recognizable Allied tank. As a model kit, the main activity is the assembly itself, with the historical subject and theater-specific finish shaping the appeal of the build. On a shelf, the Euro Theater version sits naturally among other 1:35 military subjects and diorama layouts. At the workbench, the named vehicle and theater setting provide a clear direction for paint choices, finishing work, and display planning once the build is complete.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US M36 Tank Destroyer, plastic model kit

€45.99

The 1:35 US M36 Tank Destroyer model kit brings the distinctive profile of this World War II armored vehicle into a compact scale build with a long main gun, open fighting compartment and detailed tracked chassis. In olive drab with white star markings, the finished replica carries the purposeful look of a U.S. tank destroyer parked beside other military subjects in a display lineup. The open turret area gives this kit much of its character, with visible shell storage and upper-structure detail that remain in view after assembly. Surface equipment across the hull adds further authenticity, including mounted tools, spare track sections and stowed gear fixed to the exterior rather than left as plain armor panels. Protective headlight guards, engine deck grilles, towing points and machine gun mounting details help break up the silhouette with smaller mechanical features that reward careful painting and weathering. The 1:35 scale also works well for builders who enjoy combining vehicle detail with a companion figure to strengthen the sense of proportion. On the workbench, the model offers a build centered on recognizable military hardware and layered exterior detail. Once completed, the tank destroyer suits shelf display, diorama scenes or placement alongside other 1:35 historical vehicles, where the open turret and long barrel stand out immediately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US MBT M1A1 Abrams, plastic assembly kit

€42.99

This 1:35 plastic assembly kit captures the U.S. M1A1 Abrams in a form that emphasizes the tank's low, powerful silhouette and long 120 mm smoothbore gun. The finished model brings the broad turret, angular armor layout and tracked running gear into a display piece with a strong military presence. The kit reproduces key exterior features with attention to texture and structure, including the engine grille and welded sections on the armor plates. Additional exterior equipment such as 12.7 mm and 7.62 mm machine guns and smoke dischargers gives the turret and hull a fuller operational layout. Nylon mesh is included to shape the rear bustle rack with a more realistic open pattern than a solid molded part. A commander figure and a loader figure are also included, allowing the hatch area to be finished with crew in place. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. On the bench, the model supports a detailed painting approach, from a sand-toned finish to a darker camouflage scheme guided by the kit references. Once completed, the Abrams suits shelf display, military collections or a diorama setting where the turret details, rear rack and crew figures can be viewed from multiple angles.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 US Med.MBT M48A3 Patton, plastic model kit

€27.99

This 1:35 plastic model kit captures the US Med.MBT M48A3 Patton with the heavy, purposeful look that defined the tank in Vietnam War service. The cast metal surface texture, canvas section on the gun mantlet and full tracked layout give the finished model a convincing armored presence on the workbench or in a display lineup. The build centers on a detailed hull and turret with separate equipment parts that shape the M48A3 silhouette. The model depicts the tank's searchlight, machine gun cupola and external fittings with crisp definition, while optional stowage such as jerry cans, spare track links and the engine exhaust snorkel adds more field character. The kit also includes 2 tank crew figures for a more animated display. Assembly is required, with a stated assembly time of 600 minutes. During painting and finishing, the model supports a range of historically styled marking choices shown in the kit documentation, including U.S. Army and U.S. Marine options. That makes the project suited to builders who enjoy not only the structure of an armored vehicle, but also the final stage of weathering, markings and scene setting around a specific service look.

Military model vehicles 1:35

1:35 Wespe Italian Front, plastic model kit

€42.99

This 1:35 scale plastic model kit recreates the German self-propelled howitzer Wespe in the Italian Front version, combining the compact open-top layout with a gun vehicle silhouette that stands out on a military display shelf. The updated release keeps the classic Tamiya subject while adding new parts and fresh marking options tied to vehicles used in the Italian campaign. The full-size Wespe was based on the Pz.Kpfw.II chassis and mounted the Type 18/2 10.5 cm L/28 howitzer in a fixed superstructure, a configuration that gives the model its distinctive balance of tracked mobility and artillery form. Historical background in the kit notes a production run of 676 vehicles and a crew of 5, details that place the subject firmly within mid-war German self-propelled artillery development. Interior fittings such as radio and storage areas help the open compartment read as a working vehicle rather than a closed hull. The howitzer position, rear deck area and crew arrangement also support more involved finishing and weathering work across visible surfaces. On the bench, the model suits builders who enjoy military subjects with exposed interior detail and figure integration. The 600-minute assembly time points to a substantial project, and cement and paints are required separately. Once completed, the Wespe works equally well as a standalone display piece or as the center of an Italian Front diorama with crew activity around the gun position.

Military model vehicles 1:35

1:35 WWI Brit. Tank Mk. IV Male, model kit

€95.99

This 1:35 motorized plastic model assembly kit captures the WWI British Tank Mk. IV Male in a 230 mm format that brings its rhomboid silhouette, side sponsons and riveted armor into clear view on the workbench and in a finished display. A pre-assembled single motor gearbox gives the completed tank forward movement, adding a functional layer to the historical subject rather than limiting it to a static build. Research based on the preserved vehicle at the Tank Museum in Bovington, England informs the shape and surface treatment, helping the model reflect the original machine with close attention to form. The armor plates are assembled in a layout that mirrors the Mk. IV, which gives the build a structure aligned with the full-size vehicle. Numerous road wheels, idler wheels and drive sprockets shape the tracked running gear, while metal parts are used for the chains on the unditching beam. The kit also provides 3 marking options, including a scheme for a vehicle used in the Battle of Cambrai. Assembly time is stated as 600 minutes. On a shelf, the long track run and angular hull create a strong period presence beside other 1:35 military subjects. In a diorama setting, the markings and motorized function support scenes focused on early armored warfare, trench crossings and the mechanical character of the first generation of tanks.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 WWII Dt. Panzerjäger Nashorn, model kit

€70.99

This 1:35 scale assembly kit captures the WWII German tank destroyer Nashorn with its striking long-barreled 8.8 cm Pak 43 and lightly armored, turretless chassis. The layout gives the finished model a distinctive silhouette, with the gun mounted high above the hull and the open fighting compartment fully visible in display settings. The build focuses strongly on structural detail. The 71-caliber gun is reproduced with attention to the breech area and the surrounding compartment, so interior painting and finishing remain visible after assembly. Metal parts are used in the gun section to add realistic movement and weight, which changes how the completed model sits and handles in hand. Decals support 3 marking schemes, including winter and Eastern Front versions, allowing different historical finishes from the same kit. The set also contains 4 figures representing the driver and 3 crew members, adding human scale and activity to the vehicle. With an assembly time stated at 600 minutes, the kit suits a slower bench session built around painting, marking placement and interior detailing. On a shelf, the open compartment, long barrel and crew arrangement create a focused WWII artillery display with strong depth from multiple viewing angles.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 WWII Ger.Milit.Insignia Decal Vol.2, decal set

€11.79

This 1:35 waterslide decal set adds WWII German military insignia to infantry figures with far finer uniform detail than hand painting can usually achieve at this scale. The sheet is arranged as a broad reference selection, with numbered markings that support careful placement on collars, shoulders, sleeves, caps and chest areas for a more convincing finished figure. Visible on the sheet are shoulder boards, collar tabs, sleeve eagles, chevrons, bars, cuff titles, unit strips and small geometric insignia in grey, black, tan, red, green and brown tones. The set is made by Cartograf, a printing source known among modelers for clean registration on small graphics, which matters when insignia must stay legible on compact figure parts. Source material shown in the included reference documentation covers Afrika Korps, Waffen-SS and military police uniform applications, with numbered callouts that help match specific markings to figure positions. The decal sheet suits builders finishing dioramas, squad scenes or single character figures where rank and branch markings shape the final impression. It can also support reworking older 1:35 figure builds that need sharper insignia or alternate uniform identities across a display.

Military figures & Accessories 1:35

1:35 WWII German Winter Infantry Figure Set

€14.99

This 1:35 scale plastic assembly kit recreates a tense WWII frontline moment with 5 German winter infantry figures advancing in low, cautious poses. The set is arranged around the visual rhythm of a squad moving behind armour, with soldiers kept close to the ground while the field commander stands higher, holding a Walther P38 and a grenade in each hand. Clothing and equipment give the figures much of their character. The squad wears winter uniforms seen in the middle stages of WWII, including cotton-made smocks and realistically reproduced winter overcoats. The mix of poses supports varied finishing choices across helmets, packs, boots and layered outerwear, while the different roles within the group help break up repetition on the workbench and in the finished scene. An MP40 submachine gun, rifles and an MG34 add distinct silhouettes across the 5 figures, so each stance reads clearly once painted and placed. With 600 minutes assembly time, the set suits a slower, detail-focused build centred on cleanup, painting and scene composition. Paint and cement are not included. In a snowbound street scene, a forest edge or a vehicle escort display, the figures give 1:35 dioramas a strong sense of direction, caution and coordinated movement.  Warning! Not suitable for children under 14 years.

Military figures & Accessories 1:35

1:35 Zimmerit Coating Sheet, model accessory

€12.49

This 1:35 Zimmerit Coating Sheet adds the distinctive ridged armor texture used on the King Tiger Porsche Turret without the sculpting work normally involved in putty application. The precut adhesive sections are designed for the Tamiya German King Tiger Porsche Turret kit and give broad hull and turret surfaces a more defined, uniform finish once applied and painted. The sheet contains 26 numbered parts shaped for specific exterior areas, including long side sections, front and rear plates, curved turret pieces and smaller patches for detail zones. Each section follows the contours of the model, so the textured pattern can be placed with more control around mantlet curves, armor edges and fittings. The ridged surface reproduces the look of Zimmerit while avoiding the mixing, spreading and hand-texturing steps required by 2-part putty. Assembly is required, and the stated assembly time is 600 minutes. During the build, the coating parts are applied to cleaned model surfaces before accessory parts are attached to the hull, which helps the textured sections sit flat across the intended areas. For modelers working on a military vehicle finish with added surface character, this sheet supports a more detailed result while keeping the Zimmerit stage focused on placement and fit rather than sculpting technique.

Model ships 1:350

1:350 Jp. Heavy Cruiser Mogami, scale model kit

€179.99

The 1:350 Jp. Heavy Cruiser Mogami brings a major Imperial Japanese Navy warship into a display scale that gives the hull form, bridge structure and deck layout room to read clearly on the finished model. The long cruiser profile, red lower hull, grey upper works and wood-look deck create a layered naval appearance that stands out on a shelf or in a fleet display. This assembly kit is based on the Mogami, the lead ship begun at Kure Naval Arsenal under Japan's First Fleet Replenish Program of 1931. The original ship combined 5 triple 15.5 cm gun turrets, 4 triple 61 cm torpedo launchers, 4 twin 12.7 cm gun mounts, 4 twin 25 mm guns and 2 twin 13 mm machine guns within an 8,500-ton displacement limit. Later refits replaced the main battery with 20.3 cm gun turrets and led to reinforcement work including hull strengthening, bridge resizing and crack repairs. That layered service history gives the model a strong historical identity beyond its silhouette alone. On the finished build, the stern aircraft area, catapult rails, crane structures and small floatplanes add a second focal point behind the main gun positions. The result suits careful painting sessions, naval history collections and static display setups where the Mogami can sit alongside other WWII ships in matching scale.

Model ships 1:350

1:350 Musashi 2013, battleship model kit

€114.99

The 1:350 Musashi 2013 battleship model kit brings one of the largest battleships ever built into a substantial display scale, with a finished length of 751.5 mm and a beam of 110 mm. The long hull, layered superstructure and broad deck arrangement give the build a strong naval presence, whether viewed bow-on, broadside or from above on the included stand. Musashi was the second ship of the Yamato class, completed in 1942 and later lost in the Battle of Leyte Gulf after attacks by U.S. Navy aircraft. This kit focuses on the ship's 2013 release form and highlights a different anti-aircraft fit from Yamato, with numerous single 25 mm cannons arranged across the main deck. That armament changes the look of the deck plan and gives the finished model its own identity within the class. The rerelease also adds newly designed mast parts, bringing extra definition to the upper structure. Assembly is required, with a stated build time of 600 minutes. On a workbench, the long hull and dense deck layout create a build that moves between large structural sections and fine naval details. Once completed, the model suits a display setting where the superstructure, main turrets and anti-aircraft positions can be read from multiple angles.

Model ships 1:350

1:350 U.S. Navy DD445 Fletcher, ship model kit

€35.99

The 1:350 U.S. Navy DD445 Fletcher model kit brings the lead ship of the Fletcher-class destroyers into a detailed build with a finished length of 328 mm and width of 35 mm. The long hull, stepped superstructure and wartime camouflage layout give the destroyer a clear naval profile on the included display stand with name plate. This assembly kit reproduces USS Fletcher DD-445, a ship from a class of 175 destroyers built during WWII, and focuses on the balanced form that defined the class. The deck is populated with 5-inch DP gun turrets, quintuple torpedo launchers, twin 20 mm anti-aircraft guns and depth charge launchers, creating a layered silhouette from bow to stern. Movable gun barrels, turrets and torpedo launchers allow the finished model to be posed with different deck arrangements instead of remaining fixed in one orientation. Assembly is required, and the stated build time is 600 minutes. Cement and paints are required separately. Once completed, the destroyer suits shelf display, cabinet presentation or a line-up with other naval subjects in 1:350 scale. The stand lifts the hull into a clean side profile, while the name plate gives the finished build a museum-style presentation.

Model ships 1:350

1:350 Yamato 2013, battleship assembly kit

€114.99

This 1:350 Yamato 2013 battleship assembly kit recreates the imposing silhouette of the Japanese warship in her final-mission configuration, combining a 751.5 mm hull length with dense deck detail for a striking display presence. The finished model presents the ship as she appeared just before departure for Okinawa, with minor modifications from earlier Tamiya Yamato releases and a layout shaped around the late-war fit. The large scale gives the superstructure, armament placement and deck arrangement room to read clearly across the full length of the ship. Newly designed mast parts sharpen the upper profile, while the black display stand supports the completed build as a dedicated presentation piece rather than a loose shelf model. Assembly is required, and the stated build time is 600 minutes. The kit is supplied as an assembly kit, with paints and typical modeling tools shown separately in the source material rather than included contents. On a shelf, desk or in a collection cabinet, the long beam, layered gun positions and stern details create a strong side profile that rewards close viewing from bow to stern. The model also suits focused hobby sessions where painting, fitting and finishing each section gradually brings the 1941 battleship form into view.

Model ships 1:350

1:350 Yamato, wooden-deck sheet, model accessory

€30.99

The 1:350 Yamato wooden-deck sheet adds a finely detailed timber finish to the deck area of the Japanese Battleship Yamato model, turning one of the ship's largest visible surfaces into a sharper scale feature. This 2-piece set is shaped specifically for Item 78025, so the overlay follows the deck plan closely and supports neat positioning during the build. Each sheet is pre-cut to match the deck outline, with openings prepared for the model's structures and fittings. The plank pattern is printed directly onto the surface, which removes the need to paint the deck texture by hand and keeps the line work even across broad sections. During assembly, the thin sticker layer can be aligned over the base deck to create a clean wood effect with consistent spacing and a more refined finish around circular and rectangular cutouts. This accessory suits builders who want to focus attention on the upper deck without reworking the entire ship. It fits naturally into a long-form assembly project, with the deck treatment becoming especially noticeable once turrets, superstructure sections and smaller fittings are added around it. Assembly is required.

Model aircraft kits 1:48

1:48 Aichi M6A1 Seiran, aircraft model kit

€31.49

The Aichi M6A1 Seiran appears here as a 1:48 aircraft model kit, bringing a distinctive Japanese floatplane subject into a scale format that balances build presence with manageable bench space. The non-powered design keeps the focus on the airframe itself, so the appeal lies in the aircraft's form, proportions and finished presentation rather than in moving functions. This kit suits a measured build process centered on assembly, painting and display. The 1:48 scale gives enough room to work on surface treatment and visual definition while still keeping the completed aircraft compact enough for a cabinet or shelf. Because the subject is the Aichi M6A1 Seiran, the finished model adds a recognizable World War II era aircraft to aviation-focused collections and diorama lineups. Batteries are not included. On a workbench, the model supports a steady sequence of fitting, finishing and paint application. Once completed, the Seiran works well as a standalone display aircraft or as part of a broader 1:48 aviation lineup, where matching scale helps create a consistent visual rhythm across multiple builds.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Bristol Beaufighter Mk.6, aircraft model kit

€36.49

This 1:48 Bristol Beaufighter Mk.6 aircraft model kit captures one of the RAF's best-known twin-engine fighters in a size that gives the finished build real visual impact. With a wingspan of 370 mm and a fuselage length of 270 mm, the assembled aircraft has enough presence to show off the Beaufighter's compact nose, broad wing planform and twin-engine layout in a convincing display format. The kit is designed as an assembly build and includes parts for 1 model. Clear parts reproduce the canopy glazing, while the interior build covers cockpit and fuselage sections before the airframe is closed. The instructions show propeller installation, canopy fitting and optional opened-canopy display, adding more choice to the final presentation. Decals support historically based markings, and the painting guide covers several RAF finishes, including 272nd Squadron, Malta, 1942, 96th Squadron, Scotland, 1943, and a 600th Squadron night fighter. Assembly time is stated as 600 minutes. On the bench, the model suits careful cutting, fitting, painting and decal work, with camouflage layouts and marking positions mapped across top, side and underside views. Cement and paints are required separately. Once completed, the Beaufighter Mk.6 works equally well as a focused weekend project spread across stages or as a display aircraft that highlights wartime RAF camouflage and the distinctive form of this heavily armed WW2 type.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Brit. Armo. scout car Dingo II, model kit

€17.49

This 1:48 scale assembly kit captures the British armored scout car Dingo II in a compact format that still carries the angular character of the original vehicle. The finished model measures 69 mm in length and 37 mm in width, giving the flat armor panels and tight proportions a crisp, focused presence on the workbench or in a military miniature display. The Dingo II is recreated as a plastic model kit with details drawn from the later variant, including the distinctive compact hull and a roof that can be built open or closed. That choice changes the silhouette and also affects how the crew is presented in the finished scene. A commander figure and a driver figure are supplied in realistic action poses, allowing the cockpit area to look occupied rather than empty. The kit also contains 1 set of markings for a vehicle in combat in Europe, adding a specific historical setting to the completed build. Suspension detail is rendered with an intuitive parts breakdown that helps keep the structure clear during assembly. With an assembly time stated as 600 minutes, the build suits modelmaking sessions that focus on careful painting, figure finishing and placement of the European combat markings. Cement and paints are required separately. Once completed, the Dingo II fits naturally into 1:48 military collections, dioramas and vehicle lineups where its small footprint and crewed layout add variety beside larger armored subjects.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Brit. Small Staff Car 10HP, model kit

€19.99

This 1:48 scale model kit recreates the British Small Staff Car 10HP, a light utility vehicle widely used by British and Allied forces during WWII. At 84 mm long, the finished vehicle brings the compact proportions of the original into a size that sits naturally in military dioramas, vehicle lineups and historical displays. The body shape, covered rear section and period details give the model a clear wartime identity without overwhelming a smaller-scale scene. The kit includes 1 figure and decals, adding both a crew presence and historically grounded finishing options. Marking guides in the source material show British Army and RAF versions, along with different regional and period paint references for Europe, Great Britain and North Africa. The rear body can be built with the cargo cover fitted, removed, or shown with the flap open or closed, which changes the look of the vehicle without changing its footprint. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a convoy scene or beside aircraft and support equipment, the 10HP staff car fills the role of liaison and utility transport rather than front-line armor. That makes it a useful subject for builders who want to add movement, service context and everyday military traffic to a WWII setting. Paints, cement and tools are required separately.

Model aircraft kits 1:48

1:48 Brit. Supermarine Spitfire Mk.I, plastic model kit

€43.99

The 1:48 Brit. Supermarine Spitfire Mk.I brings one of the Royal Air Force's most recognized fighters into a focused aircraft build with updated tooling and a more accurate appearance. Its streamlined fuselage and elliptical wings give the finished model the unmistakable silhouette associated with the Battle of Britain, whether displayed with the canopy open or closed. This plastic model kit can be assembled to recreate multiple Spitfire Mk.I variants, using dedicated parts for different front canopy and sight configurations. A seated pilot figure is included for the cockpit, adding life to the aircraft when viewed through the clear parts. The finished model measures 235 mm in wingspan and 191 mm in fuselage length, giving the airframe a compact display footprint while still leaving room for visible surface and cockpit work. 3 marking options allow different historical finishes, including Battle of Britain and pre-war style subjects shown in the kit material. Assembly time is stated as 600 minutes, making this a substantial bench project suited to careful painting, detailing and decal work over multiple sessions. Cement and paints are required separately. On a shelf, desk or display case, the Spitfire's wing planform, landing gear stance and cockpit detailing create a strong period aircraft presence from every angle.

Model aircraft kits 1:48

1:48 F-14A Late Carrier Launch Set, aircraft kit

€114.99

This 1:48 scale assembly kit recreates the Grumman F-14A Tomcat late model in a carrier launch setup, pairing the long twin-engine fighter shape with deck equipment that gives the finished build a clear moment in action. The completed aircraft measures 398 mm in fuselage length with a 408 mm wingspan, giving the model a broad stance that suits shelf display and diorama scenes alike. The launch-specific configuration goes beyond the airframe itself. A new nose landing gear part with a retracted kneeling shock absorber reproduces the takeoff stance used on the carrier deck, and the catapult officer figure adds a human reference point beside the aircraft. The kit also includes a paper flight deck sheet to frame the scene under the landing gear and catapult hardware. Marking options cover 4 aircraft: 2 from VF-32 Swordsmen, 1 from VF-211 Fighting Checkmates and 1 from VF-154 Black Knights. Assembly time is stated as 600 minutes. The set suits builders who want the F-14A shown in a specific operational moment rather than parked in a neutral pose. On a desk, in a display cabinet or as part of a naval aviation lineup, the combination of launch hardware, squadron markings and late model details gives the finished aircraft a focused carrier-deck character.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Fairchild Republic A-10A, aircraft model kit

€38.49

The 1:48 Fairchild Republic A-10A Thunderbolt II brings the unmistakable shape of the USAF ground-attack aircraft to the workbench as a static display model kit. Twin engines mounted high at the rear fuselage, the broad straight wing and the twin-tail layout give the finished aircraft the heavy, purposeful stance that defines the A-10A, while the 365 mm wingspan and 345 mm fuselage create a display piece with real presence. This assembly kit is built around the aircraft's distinctive combat configuration rather than a simplified silhouette. The nose-mounted GAU-8/A cannon, single-seat cockpit and underwing weapons layout all contribute to the recognisable Thunderbolt II profile. A finished height of 83 mm helps the landing gear stance read clearly in display, and the 1:48 scale leaves room for painting, markings and surface detail work across the airframe. The subject matter also carries strong historical context, reflecting an aircraft introduced in 1972 for close air support missions and known for operation from short, unimproved fields. With a stated assembly time of 600 minutes, the build suits longer bench sessions focused on careful fitting, painting and final presentation. The completed aircraft works well as a centrepiece in a military aviation collection, on a shelf with other 1:48 aircraft, or as a standalone display that highlights the A-10A's unusual engine placement and attack aircraft form. Paints, tools and cement are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Bf109 G-6 Messerschmitt, aircraft kit

€49.99

This 1:48 scale aircraft assembly kit depicts the Messerschmitt Bf 109 G-6, a variant that accounted for more than a third of total Bf 109 production. With a 207 mm wingspan and 188 mm fuselage length, the finished aircraft brings a compact World War II fighter subject to the workbench and display shelf in a size that still leaves room for fine surface and cockpit detail. The G-6 entered service in early 1943 and was powered by the Daimler-Benz DB605A liquid-cooled V12, an engine linked to a top airspeed of 640 km/h on the full-size aircraft. That historical basis shapes the kit's character, from the distinctive bulges ahead of the cockpit for the synchronized 13 mm machine guns to the option of fitting underwing 20 mm cannons in pods. The build also allows different visual configurations through canopy, armor plate and flap choices, while the included marking selections help define the final aircraft finish with more specificity. Assembly is required, with a stated build time of 600 minutes. Cement and paints are required separately. On the bench, the combination of mechanical detail, alternate external fittings and historically grounded markings supports a focused build session; once completed, the model suits shelf display, diorama use or placement alongside the E-3 and E-4/7 Trop variants in the same scale.

Military model vehicles 1:48

1:48 Ger. Kübelwagen Typ 82, model kit

€18.99

This 1:48 Ger. Kübelwagen Typ 82 model kit brings a compact WWII staff car into a format that suits focused bench work and detailed diorama planning. At 79 mm long and 33.5 mm wide, the finished vehicle has a small footprint that sits naturally beside aircraft, field equipment or other military miniatures in the same scale. The subject depicts a late-production version, with features such as short rear fenders reproduced on the body. The front doors are separate parts, allowing the stance of the vehicle to be set to match the scene rather than locking the build into a single look. The kit also adds 2 standing figures, one holding a map and the other giving instructions just before flight, which creates a clear airfield or liaison context without needing extra figure sets. Assembly time is stated as 600 minutes. Cement and paints are required separately. The combination of vehicle, markings and figures supports more than a standalone shelf build. A parked briefing scene beside an aircraft, a dispatch moment on an airstrip, or a compact command vignette all fit within the 1:48 format. The 4 marking options help shape the final identity of the model while keeping the build grounded in a specific historical setting.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Ger. Messerschmitt Bf109 E3, aircraft model kit

€28.99

This 1:48 aircraft model kit recreates the Ger. Messerschmitt Bf109 E3 with the compact proportions that defined one of the best-known fighters of the early WW2 period. The finished model measures 183 mm in fuselage length with a 207 mm wingspan, giving the single-engine aircraft a balanced display size that still leaves room for fine surface and cockpit detail. The build centers on a detailed cockpit section with interior sidewall parts, instrument panel decals and a seated pilot figure. Assembly stages also cover fuselage interior fittings, wing construction with an internal spar, separate slats and flaps, landing gear, propeller and canopy parts. The instructions show optional details such as the armor plate and an opened or closed canopy arrangement, which helps shape the final look of the aircraft. Camouflage references use RLM71, RLM02 and RLM65 mixes, and the marking guide covers several 1940 schemes including aircraft from France and Norway. On the workbench, the model supports a focused build with trimming, cementing, painting and decal application spread across clearly defined stages. Once completed, the Bf109 E3 suits shelf display, historical aircraft collections and diorama settings that call for a Luftwaffe fighter from the opening years of WW2. Assembly time is stated as 600 minutes. Paints and cement are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Ger. Pz.Kpfw.IV Ausf. H, plastic model kit

€30.49

This 1:48 scale plastic model kit captures the Ger. Pz.Kpfw.IV Ausf. H Late Prod. with the long-barreled profile, side skirt armor and compact 145 mm finished length that suit both focused bench work and shelf display. The subject represents the late production form of the Panzer IV Ausf.H, a wartime variant armed with an L/48 75 mm gun and fitted with Schurzen armor panels along the sides. Tamiya shapes the late-production configuration through specific construction details rather than a generic tank outline. The track design omits the center guide seen on earlier forms, while the upper road wheels are rendered as steel wheels after the rubber tires were removed on the full-size vehicle. Cast metal idler wheels add another identifying feature of this version. Surface areas on the hull and turret provide room for camouflage finishing, unit markings and weathering effects drawn from historical references. The assembly kit format also leaves scope for careful painting of tools, spare track links and hatch details. On the workbench, the 600-minute assembly time supports a measured build with room for trimming, test fitting and paint planning. Once completed, the model suits a compact military vehicle lineup, a WWII armor display or a diorama scene where the 1:48 scale keeps proportions consistent. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Ger.Tank II Ausf.A/B/C F.C., plastic model kit

€28.99

This 1:48 scale plastic model kit captures the German Tank II Ausf.A/B/C F.C. with the compact stance and turreted layout of the early-war light tank. The finished model measures 101 mm in overall length, a size that keeps the build manageable while still leaving room for the layered details of the hull, turret and running gear to read clearly on a shelf or in a diorama. The build allows a choice between Ausf.A, Ausf.B and Ausf.C by following the separate version guide, with variant-specific parts used at key points of the assembly. The lower hull is built around a tub structure, then fitted with 10 road wheels, 2 drive sprockets, 2 idler wheels and 8 return rollers before the track sections are attached in sequence. The upper hull adds front and rear fittings, turret components, a gun mantlet and small exterior details such as the antenna holder and Notek light. Decals are used for markings, and the commander figure can be painted and placed in the hatch to add crew detail. On the bench, the 101 mm format suits compact display spaces and smaller historical scenes without losing the character of the original vehicle. The finished tank pairs naturally with other 1:48 military subjects, whether placed as a single display piece, worked into a campaign setting, or used to explore paintwork and weathering on early-war armor. Cement, tools and paints are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 IL-2 Shturmovic & Veh. GAZ-67B model kit

€65.99

This 1:48 assembly kit brings the IL-2 Shturmovic together with the GAZ-67B in a single WWII-era scale model set, pairing a Soviet ground-attack aircraft with a compact military vehicle for a display that reads as a complete airfield scene. The combination gives the finished build more visual context than an aircraft alone, with the jeep parked alongside the plane to frame the subject from a second angle. The aircraft carries the key forms that define the IL-2 Shturmovic, including the propeller, cockpit glazing, wing surfaces, landing gear and tail wheel. Military markings and camouflage add period-specific character to the airframe, while the GAZ-67B introduces a contrasting shape with its open-top body, windshield, seats and road wheels. A driver figure is shown with the vehicle, adding scale reference and helping the ground element read as part of an active wartime setup. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, in a cabinet or as part of a broader WWII collection, the paired subjects create a more narrative presentation than a single vehicle or aircraft alone. The finished scene suits builders who enjoy military aviation, historical subjects and display layouts that combine air and ground equipment in one compact 1:48 composition.

Model aircraft kits 1:48

1:48 Jap. Mitsu. J2M3 Interceptor Raiden, model kit

€16.99

The 1:48 Jap. Mitsu. J2M3 Interceptor Raiden captures the compact, purposeful form of the Japanese Navy's land-based interceptor in a scale model kit shaped for detailed bench work and display. This J2M3 variant represents the aircraft used from September 1944 to intercept B-29 bombers attacking Japan, giving the finished build a clear historical setting as well as a distinctive wartime profile. The kit supports more than one display direction through specific build decisions. Landing gear parts can be assembled either deployed or retracted, and the airframe also includes parts for a drop tank. Two pilot figures are provided, expanding the scene beyond the aircraft itself, while 3 marking options allow different finishing results, including a 302nd Kokutai aircraft. The instructions also indicate a rotating propeller shaft, so the completed nose assembly retains a mechanical detail that suits close inspection. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the combination of aircraft structure, figure painting and marking selection creates a build with steady variation across stages rather than a single repeated task. Once completed, the Raiden sits naturally in a WWII aviation display, whether shown with undercarriage down beside the standing figure or finished in a cleaner in-flight configuration that emphasizes the interceptor's lines.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Leopard 2 A7V, plastic model kit

€33.99

The 1:48 Leopard 2 A7V plastic model kit brings the updated shape of this modern main battle tank into a compact 234 mm format with a finished width of 80 mm. Additional front armor, revised side skirts and the distinct square headlights give the silhouette a purposeful, current-service look that stands out on the workbench as the hull and turret come together. The build is designed to keep the part count lower than the more complex 35387 release, using about one third of the parts while still preserving the defining A7V features. A shaped interior adds extra structure inside the model, and the updated turret details include turret-top stowage boxes and the main sight visor seen on the real vehicle. Decals are provided for small surface details such as periscope openings and turret-side basket sections, and 2 marking options from the 393rd Panzer Battalion allow different finishing choices. The set also contains 1 torso commander figure to place the vehicle in context. On the bench, the one-piece straight track sections help the running gear come together with less interruption during assembly. Once painted and marked, the model suits shelf display, diorama scenes or a focused military modelling session built around modern Bundeswehr armor.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 Sd.Kfz.251/1 Ausf.D, model kit, half-track

€31.99

This 1:48 Sd.Kfz.251/1 Ausf.D model kit captures the look of the German half-track personnel carrier in a compact scale that still leaves room for strong surface detail and a busy display presence. With an overall length of 126 mm and a width of 48 mm, the finished vehicle suits shelf display, diorama scenes and focused painting work without demanding a large footprint. The Ausf.D version is represented here as a troop carrier, and the build centers on the vehicle's distinctive combination of front wheels and rear tracks. Tamiya reproduces the interior and undercarriage with fewer parts to keep the assembly process approachable while preserving the structure of the cabin and lower hull. The assembly type tracks are shaped to create a realistic sag effect, which gives the running gear a more natural look once installed. Three decal options are included, depicting Normandy and Eastern Front units, so the finished model can be taken in different historical directions. Two figures are included for added scene context: a commander in winter uniform and a soldier carrying an MG42 on his shoulders. Accessories such as the Panzerschreck, grenade cases and infantry equipment extend the display possibilities around the vehicle. Assembly is required and takes about 600 minutes. Paints, tools and cement are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 Supermarine Spitfire MK Vb, model kit

€28.99

The 1:48 Supermarine Spitfire MK Vb model kit centers on one of the most recognisable fighter aircraft designs of the Second World War, translated into a scale format that supports careful assembly and detailed finishing. The compact 1:48 scale gives the aircraft a display-friendly footprint while still leaving room to work on the cockpit area, wing shape and fuselage contours with a steady, deliberate approach. The MK Vb designation places this aircraft within a specific Spitfire variant, giving the build a defined historical identity rather than a generic warplane outline. Painting and finishing play a central role in the completed look, as the aircraft's elliptical wing form, slim fuselage profile and tail layout depend on clean colour separation and accurate surface treatment to stand out. Batteries are not included. On the worktable, the format supports measured progress across assembly, painting and decal application, whether the build is approached over a single focused session or several shorter stages. Once completed, the aircraft suits placement in a display cabinet, on a shelf or alongside other 1:48 scale aviation subjects where the Spitfire silhouette remains immediately recognisable.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 US Airfield Fuel Truck, plastic model kit

€28.99

This 1:48 plastic model kit recreates the U.S. Airfield Fuel Truck, a 2 1/2 ton 6x6 service vehicle used in WWII airfield operations. At about 107 mm long, the finished truck brings a compact military support subject to aircraft displays, vehicle lineups and diorama scenes where ground equipment matters as much as the aircraft itself. The design is based on the U.S. 2.5 Ton 6x6 Cargo Truck and reworked into a fuel-service variant with a large tanker body and dedicated refueling equipment. The build depicts a truck type used by the U.S. Army Air Forces, and the side service section can be shown open to reveal the hose reel area. Vinyl tubing and enameled wire are used for the fuel hose, giving the assembly a more realistic routed look than a fixed solid part. The kit also provides 2 crew figures posed for refueling work, plus 2 marking options for different finishing schemes. On a shelf or in a diorama, the truck fits naturally beside 1:48 aircraft, maintenance scenes and wartime logistics setups. Assembly time is stated as 600 minutes. Paints and cement are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 US M5A1 Stuart Light Tank, plastic model kit

€23.99

This 1:48 plastic model kit recreates the US M5A1 Stuart Light Tank in a compact 94 mm by 48 mm format, bringing the tank's high profile and sloped frontal armor into a build that reads clearly on the workbench and in a finished military display. The proportions are based on extensive research of the actual vehicle, giving the model a grounded, historical look from every angle. The turret carries a 37 mm gun and a 7.62 mm machine gun, while the surface treatment adds welded seam detail and the cast texture of the gun shield. Lower hull parts are shared with the 1:48 U.S. Howitzer Motor Carriage M8, while the front hull, upper hull and turret are newly molded for this version. Two metal weights are built into the model to give the finished tank a heavier feel in the hand. Assembly takes about 600 minutes, and cement and paints are required separately. The included commander torso with binoculars adds a focal point at the open hatch, and the 2 marking choices let the finished tank represent either C-34 CAROL or C-12 CONCRETE of the 3rd Armored Division on the Western Front in July 1944. On a shelf, in a diorama or alongside other 1:48 military subjects, the Stuart's compact dimensions and distinct turret shape make it easy to place in reconnaissance and armored support scenes.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:48

1:48 US Vought F4U-1A Corsair, aircraft model kit

€28.99

This 1:48 aircraft model kit captures the US Vought F4U-1A Corsair with the gull-wing layout and WWII fighter presence that made the original aircraft so distinctive. The finished model measures 236 mm in wingspan and about 205 mm in fuselage length, giving the shape enough size for cockpit, landing gear and surface detail to read clearly once assembled. The build includes a detailed cockpit, radial engine, main landing gear, tailwheel and canopy parts, with painting callouts integrated through the assembly sequence. The engine section allows a choice of open or closed cowling flaps, while the wing structure is designed for either folded or extended main wings. Instruction steps also show optional finishing choices such as layered insignia application and alternative external stores, so the model can be tailored to different display looks without changing its core airframe. 2 historical marking schemes are provided for period-authentic decoration. On the bench, the combination of structural assembly, painting and decal work creates a focused aircraft modelling project with clear stages from cockpit to final wing fit. Once completed, the Corsair suits shelf display, aviation collections and diorama scenes that use the seated or standing figure to add scale and context. Cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:48

1:48 WWII Citroen CV11 Staff Car model kit

€18.99

The 1:48 WWII Citroen CV11 Staff Car model kit brings a well-known French sedan into historic scale scenes with a shape that stands apart from typical military vehicles. Its elegant Traction Avant body, reproduced at 1:48 scale and measuring 91.5 mm in overall length, gives dioramas, airfield layouts and static displays a civilian-based car that was also seen in wartime service. The full-size Citroen 11CV was produced from 1934 to 1957 and became known for front-wheel drive, an advanced layout for its era. That background gives the subject a distinct place in automotive history as well as military modelling. The kit is designed as a static display model and focuses on exterior form, interior presence and chassis detail rather than motorised functions. The underside structure is rendered with attention to the original layout, which adds realism when the model is viewed from a low angle or placed in a maintenance or roadside scene. Decals support multiple finishing directions by depicting French and German military versions. On a shelf, the car sits comfortably as a standalone historic vehicle with rounded fenders, tall grille lines and a recognisable pre-war silhouette. In a 1:48 scene, it can be positioned beside tanks, support equipment or aircraft to suggest staff movement, airfield transport or occupied-city street settings. Cement, tools and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:6 Cable 0.5mm OD Black, model cable, 2m

€4.49

This 0.5 mm black model cable adds convincing routed detail to scale car and motorcycle builds by combining a vinyl outer casing with an internal wire core. That construction gives the line a controlled bend, so ignition wiring, harness runs and pipework can follow the shapes of engines, frames and body sections instead of springing back like empty tubing. With 2 m supplied, there is enough length for extended routing across larger sections or for several smaller detailing jobs within one project. The cable is intended for 1:6, 1:12 and 1:24 subjects, where fine line thickness matters to the finished look. The black finish suits visible mechanical areas and tucked-away routing alike, especially where a build needs narrow cable runs around engine bays, chassis sections or motorcycle components. The wire core also helps when shaping tighter curves or guiding the line through drilled openings in the model. Different diameters are available within the range, while this version focuses on especially slim detailing. During assembly, holes need to be made in the subject model so the cable can be threaded and positioned where the real machine carries exposed lines. It suits builders refining a showroom-clean engine bay, adding extra realism to a race car interior, or bringing more mechanical depth to a motorcycle frame and powertrain area.

Model car kits 1:24

1:6 Carbon Decal Plain F, decal sheet, carbon look

€8.19

Carbon Decal Plain F adds a carbon weave finish to scale builds with a single 130 x 190 mm wet-slide sheet that can be trimmed for exact placement. The plain layout leaves the full surface open for custom shapes, making it useful for winglets, spoilers, body panels and other areas where exposed carbon detail defines the look. Application follows a clear sequence: cut the required section, dip the decal in tepid water for about 10 seconds, place it on a clean cloth, then slide it from the backing sheet onto the model. Positioning is adjusted while the decal stays wet, and a soft cloth is used to press out excess water and trapped air. When curved surfaces need closer conformity, Mark Fit and Mark Fit Strong are recommended in the product data as decal setting solutions to help the film settle over uneven contours. The sheet is intended for static models across 1:6, 1:12 and 1:24 scale use, giving builders one material that can serve large motorcycle fairings, smaller car aero parts and detail inserts alike. On the bench, that means one sheet can cover both broad panels and narrow accents while keeping the carbon pattern consistent across the build.

Model motorcycle kits 1:6

1:6 Honda Monkey 40th Anniversary, model kit

€79.99

The 1:6 Honda Monkey 40th Anniversary model kit brings the compact proportions and retro styling of Honda's minibike into a large display scale with crisp visual detail. The black fuel tank with Honda marking, black frame, round headlight, 2 round rear-view mirrors and orange turn signals combine into a road-bike layout that reads clearly from every angle. The anniversary finish adds several standout touches beyond the basic silhouette. Red wheel rims and red rear suspension springs create a sharp contrast against the darker body sections, while the black seat with its red check pattern gives the build a distinctive period look. Chrome-finished sections on the handlebars, engine area and rear luggage rack add reflective highlights that break up the frame and bodywork. The side stand supports the completed motorcycle in a natural parked position, making the finished build easy to place in a cabinet, on a shelf or on a desk. During painting and finishing, the visible tank logo and side cover 40 marking help define the celebratory edition theme. The large 1:6 scale leaves room for careful work on the lighting, mirrors and engine surfaces, turning the motorcycle into a focused modelling project with strong display presence after assembly.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:6

1:6 Link-Type Motorcycle Chain, assembly kit

€44.99

This 1:6 Link-Type Motorcycle Chain is an assembly kit created for the 1:6 Honda CRF1000L Africa Twin model kit, adding a moving chain structure that brings extra mechanical realism to the finished motorcycle. Individual plates and metal spacers form each link, so the chain takes shape piece by piece rather than as a single molded strip. The assembly process uses a dedicated jig to hold parts in place during construction, which is especially useful when repeating the same link pattern across the full chain length. Assembly is required, and the stated assembly time is 600 minutes. The completed chain is designed to seat neatly on the drive sprocket of Item 16042. Parts included in Item 16042 also allow the chain tension to be adjusted once fitted, which helps the final installation match the layout of the model. On the workbench, this chain kit suits builders who want to spend more time on the drivetrain area and bring finer structure into a large-scale motorcycle build. Fitted to the Africa Twin model, the articulated link construction gives the side profile and rear sprocket area a more convincing scale appearance.

Model ships 1:700

1:700 US Missouri Battleship, waterline model kit

€35.99

This 1:700 waterline model kit recreates USS Missouri, the best-known Iowa-class battleship, in a format that emphasizes the ship's long, narrow hull and dense deck arrangement. With a finished length of 386.5 mm, the model gives the famous BB-63 a strong presence in a cabinet or alongside other naval subjects, where the stepped superstructure, turret layout and stern deck details read clearly from bow to aft. The original battleship entered service in 1944, and that historical identity shapes the appeal of the build as much as the finished silhouette. Iowa-class ships combined heavy armament with high speed, and Missouri became the setting for the signing of the Japanese surrender on 2 September 1945. The real ship measured 270.4 m in length and 33 m across the beam, proportions reflected here in the sleek waterline form. The class carried 9 main 16 inch guns in 3 triple turrets, with 2 forward and 1 aft, and the full-size vessel reached 33 knots from 212,000 horsepower. The assembly kit includes decals and calls for a measured, hands-on build of about 600 minutes. Paints are required separately. On a worktable, the project invites careful alignment of the hull, superstructure and armament; once completed, the model suits naval line-ups, historical displays or a single stand-alone presentation focused on one of the most significant battleships in U.S. Navy history.

Model aircraft kits 1:72

1:72 F-14D Tomcat, plastic model kit

€48.99

The 1:72 F-14D Tomcat plastic model kit brings the final Tomcat variant into a compact scale with a 272 mm wingspan and 265 mm fuselage length, while keeping the aircraft's broad stance, twin-tail silhouette and variable-geometry layout clearly defined on the finished airframe. This kit is the first Tamiya-designed Tomcat in the 1:72 War Bird Series and focuses on a clean build without losing the features that give the aircraft its character. The F-14D used General Electric F110-GE-400 engines and updated avionics, and the model reflects that late-service configuration. Two seated crew figures are included for the tandem cockpit, and 5 U.S. Navy marking options give scope to finish the aircraft in different squadron identities. Paint and cement are required separately. On the bench, the moving wing mechanism and optional detail parts support different display choices once assembly is complete. On a shelf, in a cabinet or alongside other modern naval aircraft in 1:72 scale, the Tomcat's long nose, broad fuselage and underbody stores create a strong carrier-based aviation presence.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 F-35A Lightning II, plastic model kit

€47.49

This 1:72 plastic model kit captures the F-35A Lightning II with a finished wingspan of 148 mm and a fuselage length of 218 mm, giving the aircraft's low-profile stealth shape a strong presence on the bench or in a display case. The integrated wing and fuselage structure recreates the blended wing body form, while molded radar absorbent material sections bring extra definition to the surface treatment. The airframe adds further realism through Y-shaped air intakes, detailed cockpit and landing gear bays, a one-piece engine nozzle and boxes stored in the nose landing gear bay. The Martin-Baker US16E ejection seat and the seated pilot figure with Helmet-Mounted Display sharpen the cockpit presentation. RCS enhancers can be fitted to the top and bottom surfaces, with 4 parts in total, reflecting the configuration used during basic training exercises. The flaps are assembled in the up position, and the weapons bay door is fitted closed. Build choices shape the final look of the aircraft. The kit supports 3 ordnance patterns: stealth mode, air-to-air mode and beast mode, using AIM-9X Sidewinder missiles and GBU-12 Paveway II bombs. Three marking options are included for 34th FS, 388th FW, U.S. Air Force Air Combat Command, Hill AFB, Utah, plus 301st Fighter Squadron and 302nd Fighter Squadron, 3rd Wing, Japan Air Self-Defense Force, Misawa Air Base. Paints and cement are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Messerschmitt Bf109E-3, plastic model kit

€15.99

This 1:72 scale plastic model kit recreates the Messerschmitt Bf109E-3 with the compact proportions that made the aircraft one of the defining fighter designs of the early WW2 period. The finished model measures 122 mm in fuselage length with a 137.5 mm wingspan, giving the aircraft a clear display presence while keeping the build manageable on a hobby bench. The E-3 variant is represented with the visual features associated with this stage of the aircraft's development, including its streamlined airframe, propeller-driven nose, framed cockpit canopy and landing gear layout. Surface detailing and markings support a historically grounded finish, while the 1:72 format suits collectors who enjoy building aircraft lineups with a consistent footprint. The assembly kit format leaves room for trimming, painting and final finishing choices that shape the character of the completed replica. Assembly is required and the build time is estimated at 600 minutes. On a shelf, in a display case or as part of a diorama scene, the completed Bf109E-3 brings a recognizable wartime aircraft silhouette into view. The compact size also suits modelers who want to compare different aircraft types within the same scale without giving up room for detail.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Mitsubishi A6M2b Zero, plastic model kit

€27.99

This 1:72 Mitsubishi A6M2b Zero plastic model kit recreates the main frontline carrier fighter used by the Imperial Japanese Navy across the Pacific War. The A6M2b configuration is defined here by features such as 50 cm folding wingtips, a landing hook and a radio direction finder, details that shaped the aircraft for carrierbased operations and give the finished build a clear historical identity. The kit uses new tooling for the wing, fuselage and engine cowling, and the wing is depicted in the extended position only. A slide-molded one-piece cowling keeps the nose section clean and continuous, while the cockpit and landing gear wells add visible structure in areas that remain easy to see on the completed aircraft. The original aircraft was known for a range of 3,000 km and 20 mm cannon armament, and those specifications help place the model within the story of early Pacific air combat. Assembly time is stated as 600 minutes. On the bench, the compact 1:72 scale suits careful painting, decal work and display without demanding much shelf space. The 3 marking options allow different Pearl Harbor attack aircraft to be represented, making the finished warplane a focused historical build for aviation model collections.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Mitsubishi A6M5 Zero Fighter, plastic model kit

€23.49

This 1:72 plastic model kit recreates the Mitsubishi A6M5 Zero Fighter with all-new tooling that focuses on the aircraft's refined wartime form. The finished model measures 126 mm in fuselage length and 153 mm in wingspan, giving the build a compact display footprint while still leaving room for cockpit, engine and airframe detail to stand out on the bench. The A6M5 represented a later Zero variant with an 11 m wingspan on the full-size aircraft, rounded wingtips and an exhaust propulsion system that supported a top speed of 565 km/h. That historical configuration shapes the look of this kit, from the compact fighter profile to the underbody fitment for the included 300-liter metal drop tank. The 3 marking options add further finishing choice, making paintwork and decals part of the character of the completed aircraft rather than a single fixed outcome. Paint and cement are required separately. On the workbench, the 600-minute assembly time gives space for careful trimming, dry fitting and painting across multiple sessions. Once completed, the model suits shelf display, aviation collections and diorama settings that call for a World War II Japanese Navy fighter in a manageable 1:72 format.

Model aircraft kits 1:72

1:72 P-51D Mustang North American, plastic model kit

€15.99

This 1:72 scale P-51D Mustang North American plastic model kit brings one of the best-known World War II fighters into a compact aircraft build with clear proportions and a strong display presence. With a wingspan of 157 mm and a fuselage length of 136 mm, the finished aircraft shows the long nose, bubble canopy and single-engine fighter layout in a size that fits neatly on a shelf or work area. The kit is designed as an assembly project and includes the assembly kit components for a detailed build. Instruction visuals show cockpit construction, fuselage assembly, wing installation, landing gear fitting and final canopy attachment, giving the build a clear sequence from internal sections to exterior details. The model also features 75 gallon drop tanks mounted under the wings, a propeller at the nose and landing gear parts that shape the finished parked stance. Decal and paint guides in the kit support several historically styled marking schemes, including aircraft codes, insignia and nose art details that change the final look without altering the core airframe. A 600-minute assembly time makes this a substantial bench project rather than a quick snap build. The finished aircraft suits display in a study, hobby room or cabinet, and the compact 1:72 format also works well alongside other scale aircraft in a collection. Paints, cement and tools are required separately.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:72 Vought F4U-1D Corsair, plastic model kit

€21.49

The 1:72 Vought F4U-1D Corsair brings a famous carrier-based fighter into a compact plastic model kit with the aircraft's distinctive inverted gull wing, long nose and clear-vision canopy. At 173 mm wingspan and 141 mm fuselage length, the finished aircraft has a display-friendly footprint while still leaving room for cockpit, engine and external equipment detail. This assembly kit is based on the F4U-1D version, the later Corsair variant that introduced improved visibility and underwing stores for bombs, napalm or 5 inch rockets. The build covers the cockpit interior, pilot seat, fuselage, wing assembly, engine cowling, propeller and main landing gear in separate stages. The instructions also show optional open or closed cowl flap configuration, optional drop tanks, and version-specific canopy parts. Decal and marking guides support 3 aircraft finishes: VF-84 No.167 from Bunker Hill, VMF-112 No.1 from Bennington, and VMF-312 No.530 from Okinawa in 1945. The result suits model builders drawn to World War II naval aviation, historical markings and compact aircraft subjects. Cement, tools and paints are required separately. With a stated assembly time of 600 minutes, the kit offers a longer bench project that moves from interior detail work to final markings and underwing equipment.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

Tamiya RC Opel Kadett Bundle

Product bundle consisting of: 1:10 RC Opel Kadett GT/E Rally MB-01 / Ball bearing Set BT-01/MB-01 (18) Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.   Warning! Not suitable for children under 14 years.

RC trucks

Tamiya RC Volvo Bundle

Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.   Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment.   Warning! Not suitable for children under 14 years.

Model-making abrasive material

#1500 Sanding Cloth, model hobby sanding sheet

€4.69

This #1500 sanding cloth brings controlled surface refinement to model hobby work with a fine abrasive grade and a soft sheet format. The 170 x 130 mm sheet sits comfortably in the hand and reaches flat panels, edges and smaller shaped sections where a rigid abrasive can feel less forgiving. The cloth can be used for both dry and wet sanding, making it easy to match different finishing steps and material needs. The #1500 grit is part of a 5-grade range that also includes #600, #1000, #2000 and #3000, with the number indicating the grit level. Its soft construction develops limited fold lines, a useful detail when working across visible surfaces where deeper scratch marks can interrupt the next coat or polishing stage. One sheet is included. On the bench, it suits careful smoothing between shaping, priming and finishing steps on model hobby projects. The flexible sheet format also makes it easier to wrap around contours or guide across narrow areas with steady pressure when a clean, even surface matters.  Warning! Not suitable for children under 14 years.

Model-making abrasive material

1500 Sanding Sponge Sheet, model finishing abrasive

€6.19

The 1500 Sanding Sponge Sheet brings fine surface finishing to model work with a flexible abrasive layer bonded to a cushioned backing. That combination helps the sheet sit against curves, edges and narrow parts with steadier contact than a rigid sanding surface, making it useful for refining small components by hand. The 1500 grit is suited to light finishing passes where surface texture needs to be reduced without removing too much material at once. The sponge base can be cut into smaller pieces for targeted work on tubes, rods and other shaped sections, and the sheet format leaves room to prepare custom sizes for different stages of a build. Used dry by hand, it supports controlled smoothing on detail areas, cleanup around joins and preparation before the next finishing step. On the workbench, the sheet fits the kind of close, careful handling used on scale parts, body details and other small sections that need a softer touch. It also works well when a narrow strip or small pad is needed to reach contours that are awkward for a standard flat abrasive sheet.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1978 Ford Zakspeed Capri Turbo, RC assembly kit

€174.99

The 1:10 1978 Ford Zakspeed Capri Turbo RC assembly kit brings one of the standout DRM racing cars of the late 1970s onto the TT-02 chassis, pairing a low, wide touring car stance with shaft-driven 4WD. At 488 mm long, 205 mm wide and 124 mm high, the model carries the dramatic proportions of the original car into a build that suits detailed bench work and fast on-road sessions alike. The bodyshell is formed in 1.0 mm polycarbonate and arrives unpainted, leaving the paint finish and final race look open to the builder. ABS add-on parts supply the side mirrors and rear wing, and the kit also comes with stickers plus masking stickers for the paint job. A Type 540 Torque-Tuned motor and an electronic speed controller are included, so the drive package is already matched to the TT-02 platform. The standard 251 mm wheelbase sets the chassis geometry, while the enclosed drivetrain keeps the central layout tidy during assembly and maintenance. On the road, the front 26 mm slick tyres and wider 30 mm rear slick tyres give the model the visual balance of the 1978 racer, and the independent suspension at both ends supports smooth response through bends. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 1991 Audi V8 Touring, RC model kit, TT-02

€154.99

The 1:10 1991 Audi V8 Touring brings a landmark DTM racing car into RC form with the TT-02 platform underneath and a clear polycarbonate bodyshell above. Its wide sedan proportions, rear wing, side mirrors and No.45 Frank Biela markings give the finished build the stance of the 1991 championship car whether it is lining up on asphalt or resting between runs. The assembly kit pairs a shaft-driven 4WD layout with a Type 540 Torque-Tuned motor and an electronic speed controller, creating a direct, planted driving character on on-road surfaces. Two-piece mesh wheels carry racing slick tyres, matching the touring car look while supporting smooth rolling grip on paved ground. The TT-02 layout uses identical left and right suspension arms and uprights, which simplifies parts identification during the build. A 257 mm wheelbase is specified for the bodyshell, and ABS side mirrors add another scale detail to the finished car. Radio gear, a battery pack, a charger and paints are required separately. On a workbench, the clear body invites careful trimming, painting and decal placement to recreate the 1991 race livery with crisp panel lines and sponsor graphics. Once assembled, the chassis suits car park sessions, club practice laps and shelf display alike, with the historic Audi shape giving the model a strong presence even when standing still.

On-road RC cars (2WD/4WD)

1:10 au TOM'S GR Supra, RC assembly kit, TT-02

€164.99

The au TOM'S GR Supra arrives here as a 1:10 R/C model assembly kit with the TT-02 chassis and the low, wide proportions of a modern GT500 racer. At 466 mm long, 188 mm wide and 125 mm high, with a 257 mm wheelbase, the model carries the stretched stance and planted silhouette that make the full-size car so distinctive on the circuit. The clear polycarbonate body is paired with separate polycarbonate front light cases, while black ABS resin parts add the side mirrors and rear wing as individual exterior details. Canards are also included, and the body set comes with stickers plus masking stickers for the paint job, supporting the layered race livery shown by the shell. Tamiya also includes Item 51007, the Urethane Bumper M for TT-01 and TGS applications, to help protect the body during use. Front light cases are separate parts, and LEDs are not attachable. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the dimensions and 257 mm wheelbase help when planning body fit and stance on the chassis. Once finished, the GT500 bodywork, rear wing and slick-tire setup give the model a strong touring-car presence for display, tuning sessions and R/C running alike.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi 90 quattro Racing, RC assembly kit

€169.99

The 1:10 Audi 90 quattro Racing RC assembly kit brings late-1980s touring race style to the TT-02 platform, with a 446 mm long polycarbonate bodyshell, a 192 mm width and a 127 mm height that give the car its broad, low competition look. Separate red ABS parts shape the mirrors, rear wing and air ducts, so the finished shell carries more depth than a one-piece body alone. A 251 mm wheelbase places the body on the short TT-02 layout, while the shaft-driven 4WD design keeps the drivetrain direct and neatly packaged through the chassis. The kit also includes a Type 540 Torque-Tuned motor and ESC, giving the running gear a matched starting point for paved-surface driving. Newly designed white dish wheels use a +4 mm offset, and the included urethane bumper helps protect the bodyshell during running and body mounting. Radio gear, a battery pack, a charger and paints are required separately. On a smooth car park, club track or other paved layout, the slick-tire setup and 4WD chassis suit clean, fast laps and precise line changes. During the build, the separate aero details, wheel design and racing proportions give the shell a focused finish that stands out on the stand as clearly as it does in motion.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi R8 LMS 2008, RC model car, TT-02

€185.99

The 1:10 RC Audi R8 LMS 2008 pairs a modern GT racing silhouette with the TT-02 platform, creating a model car that carries both visual presence and a clear mechanical layout. The polycarbonate body captures the low nose, stretched cabin and broad fenders of the full-size racer, giving the finished car a track-bred look whether it is parked on a shelf or moving through a smooth corner. As an RC assembly kit, this version leaves the build itself as part of the appeal. The TT-02 chassis is known for its shaft-driven 4WD design and straightforward structure, which makes the placement of major components easy to follow during construction and later maintenance. The separate body format also opens space for a custom painted finish that can lean toward period race styling or a cleaner single-colour scheme. Radio gear, a battery pack, a charger and paints are required separately. On the floor or on tarmac, the low GT shape and 1:10 format create a convincing racing impression with each pass. The combination of scale detail, chassis engineering and hands-on assembly suits hobby sessions that continue beyond the first build into setup changes, body finishing and repeat driving runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Audi V8 1992 Touring, RC assembly kit, TT-02

€159.99

The 1:10 Audi V8 1992 Touring RC assembly kit brings classic touring-car presence to the TT-02 platform, pairing a 463 mm long body with a 257 mm wheelbase for a planted on-road layout. Its clear polycarbonate bodyshell recreates the imposing lines of the 1992 race car, and separate side mirror parts add another layer of scale detail once fitted. The body measures 188 mm in width and 138 mm in height, giving the finished model the broad, low proportions associated with this era of circuit racing. Included stickers reproduce the 1992 Audi V8 Touring markings, while masking stickers help guide the paint work on the clear shell. The TT-02 chassis uses a shaft-driven 4WD configuration, and its symmetrical layout keeps major components arranged for balanced weight distribution. Coil-spring damped double wishbone suspension at the front and rear works with 4-bevel differential gears to support smooth cornering and composed running on tarmac. On a home workbench, the kit offers a focused build centred on chassis assembly, body finishing and wheel fitment. Once completed, the silver mesh-style wheels, slick tyres and detailed sedan silhouette give the model a strong track-day look during on-road driving. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 BBX 2WD Buggy, RC assembly kit, BB-01

€339.99

The 1:10 BBX 2WD Buggy brings classic off-road buggy styling together with a newly designed BB-01 chassis built for detailed assembly and rough-surface running. At 414 mm long, 233 mm wide and 136 mm high, with a 283 mm wheelbase, the layout gives the model a planted stance that suits the exposed cage structure and low, tapered body shape. The 0.7 mm polycarbonate body was designed by Atsushi Arino and divided into 3 sections to recreate the lower profile of a full-size utility vehicle. Suspension geometry follows that theme with front double wishbones, A-shaped arms and long rear trailing arms, while 4-wheel independent suspension uses CVA oil dampers and front and rear aluminum aeration dampers. A TA06 rear differential broadens compatibility with Grade-Up parts, and new metal-plated beadlock type wheels are paired with large-diameter tires for the finished look. The kit also includes a driver figure, oil filled diff, monocoque chassis frame and ball bearings. The removable rear roll cage opens access around the motor area for maintenance between running sessions or setup changes. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Blitzer Beetle, RC buggy, 2WD assembly kit

€209.99

The 1:10 Blitzer Beetle brings classic Beetle styling into an RC buggy format with a 2WD layout and a body shell shaped around the familiar rounded roofline, front fenders and compact rear. Bright orange body sections, a black rear and roof area, and large flame graphics give the model a bold custom-race look that stands out clearly once the buggy is on the move over dirt or gravel. Visible front suspension springs, a front bumper, side mirrors and window detailing add extra scale character beyond the main shell shape. The oversized knobby tyres suit the off-road buggy format, giving the model the visual stance associated with rough-surface running and vintage sand-race inspired machines. As an assembly kit, this version leaves the build as part of the hobby, with the chassis and body coming together before the first outing. Batteries are not included. The finished buggy suits track sessions, packed-dirt running areas and display between drives, where the Beetle silhouette and vivid livery remain a strong part of its appeal. It also fits hobby collections that focus on classic body styles, 1:10 RC machines or Tamiya buggy designs with a distinct retro character.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing lines that made the original 1955 car instantly recognizable. The lightweight polycarbonate body captures the early-period version with 2 rounded headlights, while the long-wheelbase MB-01 L layout gives the model a 239 mm wheelbase within overall dimensions of 419 x 198 x 137 mm for a planted on-road stance. The compact MB-01 chassis is built as a 2WD platform and uses a center frame that keeps the battery pack, motor and R/C equipment in place while drivetrain configuration changes are made. By changing the attachment directions of the final gears and steering linkage, the chassis can be set up for front-wheel drive or rear-wheel drive. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 4-wheel double wishbone suspension with friction dampers, and the motor mount, final gears and suspension are arranged in unitized sections for straightforward maintenance work. A 540 motor and electronic speed controller are included. On smooth on-road surfaces, the 60 mm front and rear tires suit the DS body shape and wheelbase with a composed, scale look. Radio gear, a battery pack and a charger are required separately, and the export body is supplied clear rather than pre-painted, leaving the finish open to a custom build.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Citroen DS, RC assembly kit, MB-01 chassis

€174.99

This 1:10 RC assembly kit recreates the Citroen DS with the long, flowing proportions that made the original car stand out, pairing a pre-painted blue polycarbonate body with smoke-tinted windows and the early-style front end with 2 rounded headlights. At 419 mm long, 198 mm wide and 137 mm high, the model carries the DS shape with a clear road-car presence on the chassis. Under the body, the MB-01 platform uses a compact 2WD design built around a center frame. The layout allows 3 wheelbase options, and the drive system can be changed between front-wheel drive and rear-wheel drive by altering the attachment directions of the final gears and steering linkage. For rear-wheel drive cars, a low or high motor position can be selected. The chassis also uses 60 mm front and rear tires, with 60D tires specified for tire changes. An electronic speed controller and 540 motor are included. The 4-wheel double wishbone suspension uses friction dampers and a symmetrical structure, giving the running gear a tidy, technical layout during assembly and maintenance. Unitized sections for the motor mount, final gears and suspension help keep service work organized. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Comical Hotshot, RC assembly kit, GF-01CB

€209.99

The 1:10 RC Comical Hotshot (GF-01CB) is an RC model assembly kit built around a compact off-road layout with a stylized Hotshot body, wing and a stance that turns every run into a lively visual scene. The lightweight polycarbonate shell is pre-painted in PS-2 Red, and the included sticker set based on the 2007 re-issue Hotshot adds the finishing graphics without requiring a separate body paint stage. Power runs through the GF-01CB chassis via a gear-driven 4-wheel drive system, while ABS two-part wheels use red and white spoke sections to match the body styling. ST block bubble tires pair a stepped tread with 45/99 mm front and 55/99 mm rear sizing, giving the chassis its distinctive proportions and helping it track across uneven ground. Red-molded CVA Super Mini oil dampers manage suspension movement during bumpy driving, and the rear wheelie bar supports dramatic nose-up acceleration when throttle is applied hard. Dedicated side guards, bumper and muffler parts complete the custom look, and included light pods allow installation of separately sold 5 mm LEDs. This model suits bench building sessions as well as short outdoor RC runs on loose, uneven surfaces where the tall tires and 4WD layout can be appreciated. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 Dark Impact, RC buggy kit, 4WD DF-03

€219.99

The 1:10 Dark Impact is an RC buggy kit built around the DF-03 chassis, combining shaft-driven 4WD with a mid-rear motor layout for balanced off-road running. At 425 mm long, 230 mm wide and 150 mm high, the buggy carries a low racing stance with the ground clearance and suspension travel needed for dirt tracks, jumps and uneven sections. A longitudinal battery position supports the chassis balance, and the battery loads through the bottom of the frame so routine access does not require body removal. Full ball bearings reduce drivetrain friction across the running gear, while steel drive shafts with joint cups and a main shaft with steel pinion gear support the transfer of power. The suspension uses extra long arms, rear racing uprights and independent double wishbones to keep the buggy composed when the surface breaks up. An aluminum motor mount plate adds a rigid mounting point, and the internal gear ratio is 2.94. A 540 type motor is included. On a hard dirt track, the larger diameter and width of the off-road tire setup help the buggy settle into ruts and carry speed through linked corners. The rear wing and low body shape give the model a focused racing look on the stand between runs. Radio gear, a battery pack, a charger and an electronic speed controller are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 DB01SR Chassis, RC assembly kit, 4WD

€329.99

The DB01SR Chassis kit brings a 1:10 belt-driven 4WD buggy layout together with the Baldre polycarbonate body, creating a focused RC build with race-oriented hardware already in the box. The 2 identical drive belts give the drivetrain a symmetrical basis that suits loose surfaces and fast direction changes on off-road tracks. This chassis kit is supplied with multiple Hop-Up Option parts, including front and rear assembly universal shafts, front and rear aluminum hex hubs, front and rear dish wheels, a TRF201 rear wing set and 2 sets of reinforced drive belts. The gear differentials use steel bevel gears, a combination intended for lower maintenance needs and compatibility with high-power motors. Square-shaped battery packs can be installed, which broadens battery fit within the chassis format. Radio gear, a battery pack, a charger and paints are required separately. On a dirt course, the slipper clutch helps the buggy settle its drive as grip changes through corners and rough sections. The carrying case keeps the chassis kit and included parts together between build sessions, transport and track days.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 F104 PRO II w/Body, RC assembly kit

€254.99

The 1:10 F104 PRO II w/Body is an RC assembly kit built around the lightweight F104 direct drive chassis, paired here with upgraded components and a new lower deck for a sharp, responsive formula racing setup. At 440 mm long, 180 mm wide and 88 mm high with a 270 mm wheelbase, the layout captures the long, low stance of a modern single-seater while keeping the mechanical package focused and compact. Its FRP double deck chassis uses an inline longitudinal battery position, helping keep the central layout clean and purposeful. At the rear, an aluminum ball differential lets the rear wheels be changed without dismantling the differential, a practical detail for tuning and maintenance between runs. Semi-pneumatic synthetic rubber tires support the on-road formula format with a realistic look and planted contact patch. The body set adds 2 side pontoon configurations, including alternative lower sections for chassis fitted with larger RC equipment. Separate parts depict the complex front wing, low rear wing, rear diffuser, mirrors and helmet, giving the finished car a layered competition look once painted and marked. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the kit offers detailed assembly and setup work; on smooth tarmac, the direct drive layout and formula proportions create a focused RC driving session with quick reactions and clean racing lines.

On-road RC cars (2WD/4WD)

1:10 Fiat 131 Abarth Olio Fiat, RC assembly kit

€184.99

This 1:10 RC assembly kit captures the Fiat 131 Abarth Rally Olio Fiat in a compact rally format built around the MF-01X chassis. The polycarbonate body measures 400 mm long, 180 mm wide and 132 mm high, and the 239 mm L-size wheelbase gives the shell the proportions of the original competition car as it sits over the chassis. The body uses separately molded components for the side mirrors and rear wing, which helps preserve the distinct shape of these details instead of flattening them into the shell. Polycarbonate light cases are designed for separately sold 5 mm LEDs, opening the door to a more complete front and rear light setup. The kit also includes stickers for body details and logos, allowing the Olio Fiat livery to be built up across the shell with the correct visual character. A Type 540 Torque-Tuned motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On the ground, the MF-01X layout combines shaft-driven 4WD with 4-wheel double wishbone suspension, a combination suited to paved running and flat dirt stages. The 239 mm wheelbase and higher rally-style stance give the chassis the look and clearance associated with classic rally machines. It suits bench sessions focused on body finishing just as well as outdoor runs where the suspension can work over loose, dusty surfaces.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford Escort Custom, RC assembly kit, TT-02

€154.99

The 1:10 Ford Escort Custom brings classic 1998 touring car style to the TT-02 platform in an RC assembly kit with a 425 mm length, 189 mm width, 145 mm height and 257 mm wheelbase. Its low roofline, wide body shape and race-inspired proportions give the finished model a strong track presence whether it is being built on the bench or lined up for a run. The bodyshell is formed in 1.0 mm polycarbonate and comes with separate parts for the side mirrors and rear wing, so the exterior gains extra depth beyond a one-piece shell. White ABS dish wheels pair with treaded tires for the period-correct look shown by the Escort Custom body. Stickers and masking stickers are included for the paint job, supporting cleaner window lines and sharper placement of the livery details. The kit is based on the TT-02 chassis, a shaft-driven 4WD design with a bathtub frame layout that keeps the main components arranged in a straightforward format. Radio gear, a battery pack, a charger and paints are required separately. On a shelf, the Ford Escort Custom body, wing and mirror parts create a focused motorsport silhouette with clear 1:10 scale character. During running sessions, the 4WD TT-02 layout and independent suspension support controlled handling while the detailed shell keeps the model visually tied to the full-size car.

On-road RC cars (2WD/4WD)

1:10 Ford Focus RS Custom, RC assembly kit, TT-02

€154.99

This 1:10 RC assembly kit recreates the Ford Focus RS Custom on the TT-02 platform, pairing a compact 427 mm length with shaft-driven 4WD for a layout built around controlled on-road running. The pre-painted 1.0 mm polycarbonate bodyshell gives the model its white custom finish straight away, while the 185 mm width and 145 mm height keep the proportions close to the full-size car's assertive stance. Separate parts depict the side mirrors and rear wing, adding sharper body definition than a single-piece shell alone. The 257 mm wheelbase works with the TT-02 layout to place the main components in a balanced arrangement across the chassis. Stickers and masking stickers are included for the finishing work, and the body arrives with pre-cut wheel arches and pre-made body mount holes. Smoke-tinted windows add contrast to the white shell, and the custom street version is presented without sponsor logos for a cleaner look. On a workbench, the kit offers a focused build centered on fitting the bodyshell, chassis parts and running hardware into a complete 4WD touring car. Once assembled, the combination of racing radial tires, 16-spoke wheels and the Focus body shape gives the model a crisp on-road presence suited to driving sessions and shelf display alike. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Ford GT Mk.II 2020, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit recreates the Ford GT Mk.II 2020 as a low, track-focused machine with a 479 mm length, 188 mm width and 112 mm height. The 257 mm wheelbase gives the model the stretched proportions of the full-size car, while the lightweight polycarbonate shell brings the body lines into a form suited to painting, trimming and final detailing. Separate parts are used for the flying buttresses, rear wing and side mirrors, so the finished car carries more depth than a one-piece shell alone. Twin 5-spoke wheels match the race-bred look, and the included markings add the visual finish shown by the GT Mk.II design. The TT-02 platform is built around a shaft-driven 4WD layout, and its 4-wheel independent double wishbone suspension uses matching arm and upright parts side to side. That shared parts layout keeps maintenance more straightforward when the chassis is opened for adjustment or replacement work. On the bench, the body invites a careful paint process with masking for windows and light areas before the graphics go on. Once assembled, the long wheelbase, low roofline and prominent aero parts give the model a planted circuit stance that stands out in running sessions as clearly as it does at rest. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Ford Mustang GT4, RC assembly kit, TT-02

€154.99

The 1:10 Ford Mustang GT4 RC assembly kit brings GT4 race car presence to the TT-02 platform with a sharply formed polycarbonate body, a 459 mm overall length and styling based on the full-size car's CAD data. Front and rear light cases are also molded in polycarbonate, giving the shell extra depth around the lamps once the body is finished and mounted. The TT-02 chassis places this model in Tamiya's shaft-driven 4WD touring car range, with a layout designed to keep upkeep straightforward while leaving room to explore the broad TT-02 option parts line. Stickers are included to create the original livery, and masking stickers support the paint process on windows and detail areas. The shell also uses separately molded parts for the rear wing and side mirrors, which helps preserve the distinct GT4 silhouette. A 257 mm wheelbase is specified for the body, and the shell is prepared with pre-cut wheel arches to reduce trimming during assembly. On a smooth indoor surface or a paved outdoor run, the low racing body, slick tires and touring car chassis combine into a focused on-road driving setup with a clear motorsport look. Radio gear, a battery pack, a charger and paints are required separately.

RC buggys (2WD/4WD)

1:10 Holiday Buggy 2010, RC assembly kit, 2WD

€144.99

The 1:10 Holiday Buggy 2010 RC assembly kit brings back a classic Tamiya buggy from the 1970s with the familiar body shape mounted on the DT-02 chassis. That combination pairs retro styling with a current hobby platform, creating a buggy that looks at home on dirt, gravel and uneven ground while keeping the mechanical layout easy to follow during the build. The DT-02 uses a bathtub frame with the battery pack loaded in the center, a chassis arrangement that helps distribute weight evenly through direction changes and rough sections. At the rear, the motor drives a 2WD transmission that keeps the drivetrain layout straightforward and accessible. Double wishbone suspension at all 4 wheels manages wheel travel through bumps, while the buggy format gives the model the ground-ready stance associated with classic off-road RC cars. The re-release format also preserves the identity of the original Holiday Buggy while placing it on a chassis designed for dependable running. On a compact track, a gravel path or a rough open patch, the chassis layout supports smooth steering corrections and stable corner entry as the surface changes. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Honda NSX 1998 Racing, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing onto the TT-02 platform in a form that combines scale presence with focused on-road running. At 435 mm long, 194 mm wide and 121 mm high, with a 257 mm wheelbase, the finished car carries the low, stretched proportions of the race machine across tarmac and smooth indoor surfaces. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp shaping around the NSX lines. Gun metal 6-spoke wheels are paired with racing slick tires, giving the model the visual character of a circuit car and the contact patch suited to paved running. The TT-02 chassis uses a shaft-driven 4WD layout, a format that distributes drive front and rear through a central shaft for stable acceleration and composed handling. A Type 540 Torque-Tuned motor and ESC are included as part of the running package. Stickers and masking stickers support the paint process with defined window lines and race graphics. On a smooth car park, club floor or home workshop bench, the model suits builders who want both body finishing and driving in one project. Radio gear, a battery pack, a charger and paints are required separately, allowing the final setup and colour scheme to be chosen to match the intended running style.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Honda NSX Racing, RC assembly kit, TT-02

€174.99

This 1:10 RC assembly kit brings the 1998 Honda NSX Racing into a compact on-road format with a 435 mm long body, a 257 mm wheelbase and the low, wide proportions that define the full-size race car. The pre-painted polycarbonate bodyshell arrives in PS-1 White with PS-31 Smoke windows, so the main color layout is already in place before the final exterior details are added. The bodyshell uses 1.0 mm polycarbonate and is shaped to capture the lines of the 1998 Honda NSX Racing, from the low nose to the extended rear wing profile. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for its straightforward drivetrain path and composed handling on paved surfaces. An ESC and Type 540 Torque-Tuned motor are included, giving the chassis its electric drive package straight from the kit. Gun metal 6-spoke wheels and racing slick tires match the car's circuit-focused character, while stickers and masking stickers help complete the livery and window detailing. On a smooth floor or paved running area, the long wheelbase and 4WD layout support clean tracking through bends and steady power delivery out of corners. The pre-painted body also suits builders who want to focus more time on assembly, decal placement and final setup than on the first paint stage. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hornet EVO, RC assembly kit, 2WD buggy

€209.99

Hornet EVO brings the classic Hornet buggy shape back in a 1:10 RC assembly kit that ties anniversary styling to hobby-grade mechanical detail. The 0.7 mm polycarbonate body keeps the familiar silhouette from Item 58336, while the updated sticker design refreshes the black, yellow and orange racing look across the nose, sides and rear wing. Under the shell, the 2WD chassis uses the bathtub frame layout from Item 58336 and combines it with a Type 540 motor and an included ESC for electric rear-wheel drive. The suspension differs from Item 58336 with 4-wheel independent double wishbone suspension, CVA oil dampers, a revised rear gearbox and full ball bearings. Front ribbed tires and rear high-grip spike tires split steering and traction duties, giving each axle a distinct role on dirt and other loose surfaces. The clear body shell also leaves room for a custom painted finish that follows the supplied markings. On a compact off-road course, the exposed suspension, rear motor layout and large rear tires create the classic stance of a racing buggy as it accelerates out of turns and tracks across uneven ground. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hotshot II (2024), RC assembly kit, 4WD

€229.99

The 1:10 Hotshot II (2024) is an RC assembly kit that brings back a classic 4WD buggy with a compact 390 mm length, 235 mm width and 160 mm height. Its shaft-driven layout sends power to all 4 wheels for confident running on loose ground, while the black body with orange line graphics and a large rear wing gives the model the sharp stance of a period off-road racer. The lightweight body and wing are formed in 0.7 mm polycarbonate, and the shell comes pre-cut and pre-painted in black, leaving the final livery to the updated sticker set. Underneath, the ABS monocoque frame and suspension arms use reinforced resin sections. The front and rear suspension work through a 4-wheel independent double wishbone layout, with CVA oil dampers II and a front stabilizer managing chassis movement as the buggy changes direction or crosses uneven terrain. Semi-pneumatic hybrid tires combine oval block and pin spike tread, and they are mounted on large-diameter one-piece nylon wheels. A Type 540 motor and ESC are included. Radio gear, a battery pack, a charger and paints are required separately. On a dirt track, packed gravel or a backyard course, the Hotshot II (2024) suits builders who want both assembly detail and active driving. The re-released 1987 design also gives the finished buggy strong shelf presence between running sessions.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Hotshot II Blockhead Motors, RC assembly kit

€269.99

The 1:10 Hotshot II Blockhead Motors RC assembly kit brings back the 1987 Hotshot II with a custom buggy look shaped around Jun Watanabe's BLOCKHEAD MOTORS sticker design. At 390 mm long, 235 mm wide and 150 mm high, the model combines classic 4WD proportions with a raised driver position and a vivid blue finish that stands out on the shelf and on the track. The pre-cut polycarbonate bodyshell is 0.7 mm thick and arrives pre-painted, while cutlines and hole marks follow the original Hotshot II body layout. A shaft-driven 4WD system gives the chassis its period-correct mechanical character, and sealed gearboxes with differentials support the drivetrain layout. The suspension pairs double wishbones with a front stabilizer, 1 front transverse damper and 2 rear CVA II oil dampers for a distinctly technical off-road setup. Matte-finish metal-plated uprights and wheels reinforce the custom presentation, and the set also contains number plates, light pods, side plates, window nets and a dummy antenna for added scale realism. A Type 540 motor and an electronic speed controller are included. On a workbench, the kit offers a focused build with visible chassis detail, custom graphics and classic buggy hardware. Once assembled, the Hotshot II Blockhead Motors suits display, collection and RC running with a body style that links early Tamiya 4WD racing history to a fresh custom treatment.

On-road RC cars (2WD/4WD)

1:10 Lancia 037 Rally, RC assembly kit, TA02-S

€234.99

The 1:10 Lancia 037 Rally RC assembly kit brings a classic Group B silhouette to the TA02-S platform, pairing the short-wheelbase chassis with a body shape known from the 1983 works rally car. At 422 mm long, 186 mm wide and 132 mm high, the model carries the compact stance, wide arches and rear wing that define the 037 on the stage. The body is injection molded and fitted with newly produced front bumper and sticker sheet parts created for this release. Metal-plated light cases frame the headlights, taillights and fog lamps, while separate side mirrors and windshield wipers add extra surface detail beyond the main shell. Inside, the cockpit insert depicts both driver and co-driver alongside the dashboard, giving the cabin a more complete rally layout when viewed through the glazing. The TA02-S chassis uses a bathtub frame and is compatible with standard Type 540 motors. An electronic forward and reverse speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On a paved course, the shaft-driven 4WD system and short wheelbase combine into a lively rally-style driving character, while the double-wishbone suspension and oil dampers help the chassis work through repeated corner entries. The detailed shell, competition markings and cockpit scene also give the finished car strong presence between running sessions.

On-road RC cars (2WD/4WD)

1:10 Lancia Delta HF Integrale, RC assembly kit

€169.99

The 1:10 Lancia Delta HF Integrale RC assembly kit pairs classic rally car shape with the TT-02 chassis, a shaft-driven 4WD platform built around a tub frame layout. At 407 mm long, 186 mm wide and 159 mm high, the model carries the compact, upright proportions of the original car while the 257 mm wheelbase sets the stance on the chassis. The unpainted polycarbonate body arrives with separate mirrors and a rear spoiler, ready for finishing work that brings out the car's period rally character. Under the shell, the TT-02 layout combines a central driveshaft with front and rear cone differentials using 4 bevel gears. The front end is toe adjustable, and the motor mount also accepts type 380 motors in addition to the included type 540 motor with air cooling. A battery compartment designed for different battery types broadens setup choice, while the included electronic speed controller completes the core drive package. Rally block tread tyres and white wheels match the car's competition look and suit loose-surface style running. The kit format gives the build real substance, from body preparation to chassis assembly and final setup. Decals and window masking film are included for the finishing stage, supporting accurate placement of markings and clean window lines. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 M-07 Concept Chassis Kit, RC assembly kit

€194.99

The 1:10 M-07 Concept Chassis Kit is a front-wheel-drive RC assembly kit built around a rigid 1-piece monocoque with lower deck and integrated upper frame sections. At 332 mm long and 164 mm wide, the layout keeps the running gear compact and direct, creating a chassis that responds quickly while leaving core service points easy to reach between sessions. The M-07 uses 4-wheel double wishbone suspension with newly designed long arms and dedicated long steering linkage components. That geometry gives a wide setup window and supports measured changes in handling when rear toe is adjusted with spacers. The differential can be removed from the underside with minimal disassembly, which helps when tuning or servicing the drivetrain. Full ball bearings reduce friction through the transmission, and the chassis is also compatible with low-profile servos and standard IFMAR square-shaped Li-Po battery packs. Stabilizers can be fitted separately, and reinforced body mounts provide a more secure shell attachment. On a home workbench, the selectable 225 mm or 239 mm wheelbase opens the chassis to different M-chassis body combinations. At the track, the direct front-wheel-drive layout, oil-damped suspension and accessible setup points support repeatable changes that can be felt clearly from one run to the next.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 M-08R Chassis Kit, RC assembly kit

€319.99

The 1:10 M-08R Chassis Kit is an RC assembly kit built around the rear-wheel drive M-08 Concept platform and equipped with a broad package of competition-minded option parts. Carbon fiber battery holders, a carbon fiber body mount base and a dedicated 20 g chassis weight shape a layout aimed at controlled balance on paved circuits, while the blue anodized finish on key parts gives the chassis a crisp technical look during bench setup and track preparation. At the rear, the TA06 ball differential uses 12 3/32-inch balls to manage power delivery with a stable, planted feel. Reinforced K parts support the gearbox and steering area, and M-07 Concept reinforced D parts use carbon fiber-reinforced resin in the suspension arms. Aluminum turnbuckle shafts in 3 x 18 mm, 3 x 23 mm and 3 x 32 mm sizes allow length adjustment without removing the adjusters, which speeds up tuning work between runs. Hex head screws are used throughout the build, and the kit also contains option parts such as aluminum wheel nuts, wheel hubs, suspension shafts, ball connectors, a servo saver, universal shaft cross joints and an aluminum shaft set. Radio gear, a battery pack, a charger and paints are required separately. On a club track or a car park circuit, the chassis supports measured setup changes for steering feel, suspension movement and rear traction. The exposed layout also suits workbench tuning, where damper settings, turnbuckle length and drivetrain setup can be adjusted before the next session.

On-road RC cars (2WD/4WD)

1:10 MB 190E debis Zakspeed, RC assembly kit

€159.99

The 1:10 MB 190E debis Zakspeed RC assembly kit brings classic DTM character to the TT-01 Type E platform, pairing a detailed touring car body with shaft-driven 4WD for controlled on-road running. The 445 mm length, 184 mm width and 257 mm wheelbase give the chassis the proportions of a full touring racer, with a long, low silhouette that stands out on the track and on the shelf. The transparent polycarbonate body is supplied with attachments and reproduces the race car shape with a separate rear spoiler, mirrors, chrome-plated radiator grille and Mercedes-Benz star. The body shell is finished with markings that build the debis Zakspeed race look shown by the 1990s DTM car. A Torque Tuned motor is included together with an electronic controller, creating a complete drive package around the TT-01 Type E layout. The 6-spoke rims and 26 mm slick tires match the on-road setup, while the suspension geometry works with independent front and rear movement for a settled response through corners. As a kit model, this car suits builders who enjoy preparing, painting and fitting a body shell before the first run. On a smooth circuit or open paved space, the low touring profile, shaft drive and slick tire setup support fast laps, clean direction changes and a strong scale racing presence. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 McLaren Senna, RC assembly kit, TT-02

€159.99

This 1:10 RC assembly kit brings the McLaren Senna into an on-road format with a low polycarbonate body, black ABS side mirrors and a separate rear wing that sharpen the supercar silhouette. At 466 mm long, 194.6 mm wide and 118 mm high, the model has a broad, flat stance, while the 257 mm wheelbase gives the proportions a stretched, purposeful look. The TT-02 chassis uses a shaft-driven 4WD layout, a format known for straightforward construction and broad setup flexibility across different running preferences. A Urethane Bumper L sits at the front to take the edge off minor contact during use and handling. The body shell requires painting, cutting out, attachment of parts and sticker application, so the finished car carries the builder's own finish rather than a pre-decorated shell. Radio gear, a battery pack, a charger and paints are required separately. On smooth ground, the racing radial tires and 10-spoke wheels suit the car's road-going character and visually match the sharp lines of the McLaren body. The kit fits hobby sessions that combine body finishing, chassis assembly and later driving time, with the completed model equally at home in running sessions or parked where the body shape can be appreciated up close.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-AMG GT3 EVO, RC assembly kit, TT-02

€179.99

The Mercedes-AMG GT3 EVO arrives here as a 1:10 RC assembly kit on the TT-02 chassis, combining modern GT3 bodywork with a shaft-driven 4WD layout built for controlled on-road running. At 454 mm long, 189 mm wide and 120 mm high, the model carries the low, stretched proportions of the race car, while the 251 mm short wheelbase shapes a compact touring car footprint on the bench and on the circuit. The body is formed in lightweight polycarbonate and uses separate polycarbonate front light cases, plus individual rear wing and canard parts to define the front and rear aero surfaces with more depth. Separate black ABS parts depict the side mirrors and rear wing stays, adding contrast and sharper edge definition to the shell. The kit also includes Item 53415 Touring Car Urethane Bumper Sponge. LED lights are not attachable on the front light cases. A Type 540 Torque-Tuned Motor is specified in the kit data, and the included ESC completes the main electronics package supplied in the box. This combination suits measured assembly sessions, painted body finishing and repeated runs on smooth tarmac or indoor on-road surfaces. Radio gear, a battery pack, a charger and paints are required separately, so the build can be completed with the preferred running equipment and body finish.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mercedes-Benz CLK-GTR, RC assembly kit

€274.99

This 1:10 RC assembly kit pairs the 1997 Mercedes-Benz CLK-GTR with the TC-01 chassis, combining low GT racing proportions with a shaft-driven 4WD layout built for active on-road running. The polycarbonate body recreates the streamlined coupe form in a 470 mm length and 194 mm width, giving the finished car a long, planted stance that stands out on a circuit or display shelf. A 257 mm wheelbase sets the proportions, while silver mesh wheels and racing slick tires underline the competition look. The rear wheels use a wide tread, adding visual weight at the back of the car. Under the shell, the composite monocoque frame places the motor centrally and sends drive through front and rear propeller shafts with oil filled gear differentials. The suspension mirrors full-race thinking with A-shaped long arms and inboard front and rear setups, where push rods and rocker arms actuate the oil dampers. A rear transverse battery position also accepts 139 x 47 x 25 mm square-shaped battery packs. Adjustment options make the chassis rewarding to tune for repeated track sessions, with spacers and shims used to alter camber, skid and toe angle settings. Identical left, right, front and rear suspension arms and uprights help keep maintenance more straightforward when setup changes are part of the routine. A 540 motor and assembly guide are included. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Mitsubishi Lancer Evo V, RC assembly kit

€154.99

The 1:10 Mitsubishi Lancer Evo V RC assembly kit brings late-1990s rally-bred styling to the TT-02 platform in a road car specification. At 445 mm long, 185 mm wide and 145 mm high, with a 257 mm wheelbase, the model has the proportions to give the Lancer Evolution V shape real presence on the track and on the bench. The bodyshell uses 1.0 mm polycarbonate, a material chosen for low weight and crisp molded form around the bulging fenders, hood louvers, air intakes and rear section. Separate parts are used for the side mirrors and rear wing, adding depth beyond a one-piece shell. The kit also comes with stickers and masking stickers for the paint job, supporting accurate window masking and exterior markings during finishing. Beneath the shell, the shaft-driven 4WD TT-02 chassis provides the mechanical base, pairing straightforward drivetrain layout with the stable feel expected from an on-road touring platform. 12-spoke silver wheels and tread patterned racing radial tires complete the stance with a road-focused look that suits paved running. On a workbench, the body, markings and separate exterior parts support a detailed finishing session; on an indoor hall floor or smooth asphalt, the TT-02 layout and 4WD system give the model a composed, planted character through laps and direction changes.

On-road RC cars (2WD/4WD)

1:10 Monster Beetle, RC assembly kit, 2WD

€234.99

The 1:10 Monster Beetle RC assembly kit brings the shape of the early Volkswagen Beetle onto a raised 2WD off-road chassis, pairing classic custom styling with the tall stance and oversized tires that made the 1986 original stand out. At 410 x 290 x 240 mm, the model has a broad, planted presence that reads clearly on the bench and on rough ground. The body is formed in ABS, while the chassis keeps the ABS space frame layout of the earlier release. Rear universal drive shafts transfer power smoothly, and rubber boots help shield the joints from dust during off-road use. A large dust cover protects the installed R/C equipment, and the set also contains a driver figure that completes the cockpit view. The suspension layout combines double-wishbone front arms with a trailing arm rear setup, giving each axle a distinct mechanical character within the build. This reissue suits hobby sessions that mix careful assembly with outdoor running on dirt, gravel and other uneven surfaces. Radio gear, a battery pack and a charger are required separately. Once built, the combination of Beetle bodywork, tall ride height and deep-tread tires gives each pass the unmistakable Monster Beetle silhouette.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Motul Autech Z 2023, RC assembly kit, TT-02

€159.99

The 1:10 Motul Autech Z 2023 RC assembly kit brings Super GT presence to the TT-02 platform with a low, wide touring car shape and a detailed polycarbonate shell. At 468 mm long, 188 mm wide and 120 mm high, the finished car has the stretched proportions of the full-size racer, and the 257 mm wheelbase gives the chassis a balanced footprint for on-road driving. Separate polycarbonate front and rear light cases add depth to the bodywork, while canards, black ABS side mirrors and the large rear wing sharpen the race-bred silhouette. The shell is paired with stickers and masking stickers for the paint job, allowing the livery lines and sponsor graphics to be finished with clean separation. The TT-02 layout uses shaft drive for 4WD transmission and is built around a straightforward chassis design that keeps the mechanical arrangement easy to follow during assembly. Front and rear suspension hardware, the central battery position and the enclosed drivetrain layout give the model a tidy, competition-style structure. On a smooth car park or club track, the slick tires and 6-spoke wheels suit fast laps, sweeping corners and repeated setup sessions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Motul Autech Z 2023, RC car kit, TT-02

€184.99

The 1:10 Motul Autech Z 2023 brings current GT race styling to the TT-02 platform with a sharply contoured Nissan Z bodyshell, broad fenders and a tall rear wing that stand out on the track and on the shelf. Its low touring-car stance and enclosed wheel arches give the finished model the compact, aggressive look seen in full-size circuit machines. The body is formed in polycarbonate and supplied for painting, so the red, black and gray livery can be built up with clean color separation and race-focused detail. Sponsor-style markings, the number 23 graphics, window tint areas and exterior mirrors add another layer of scale character once applied. The TT-02 chassis places the shaft-driven 4WD system in a straightforward layout that suits regular on-road running and keeps the mechanical package easy to understand during the build. Deep-dish wheels and slick tyres reinforce the circuit theme and match the body's wide, planted proportions. On a smooth car park, indoor hall or club track, the model combines visual drama with the direct feel of a 4WD touring chassis. Radio gear, a battery pack, a charger and paints are required separately. After assembly and finishing, the Motul Autech Z 2023 works equally well for driving sessions, display between runs, or adding a modern Super GT shape to an RC collection.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Nissan Skyline GT-R R33, RC kit, TT-02D

€194.99

The 1:10 Nissan Skyline GT-R R33 RC assembly kit pairs the unmistakable shape of the fourth-generation Skyline with the TT-02D platform, a drift-focused version of the TT-02 chassis. With its 257 mm wheelbase, detailed polycarbonate body and large rear spoiler, the model brings the long, low stance of the R33 into a format built for controlled slides and precise line changes. The body shell is supplied with masking film for the windows, making paint preparation more straightforward while keeping the glazing areas crisp. An aluminum radiator detail adds another visual accent to the finished shell, and included stickers complete the exterior markings. Under the body, the shaft-driven 4WD layout channels power through a protected drivetrain, a useful setup when repeated drift runs put constant load through the transmission. CVA oil pressure shock absorbers support stable chassis movement, and full ball bearings help the running gear move with less friction. The included electronic speed controller and 540 electric motor complete the core drive system. Radio gear, a battery pack, a charger and paints are required separately. On a smooth indoor surface or a clean stretch of asphalt, the TT-02D layout supports long arcs, quick transitions and repeated practice laps. The finished chassis also leaves room to explore numerous TT-02 option parts available separately for further tuning and setup changes.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Opel Calibra V6 Cliff, RC assembly kit

€149.99

The 1:10 Opel Calibra V6 Cliff RC assembly kit brings 1990s touring car presence to the bench and the circuit with a low, wide body shape and a shaft-driven 4WD layout underneath. At 448 mm long, 185 mm wide and 128 mm high, with a 257 mm wheelbase, the model carries the proportions of the full-size race car into a format built for on-road running. The clear polycarbonate bodyshell is supplied with separate side mirrors and a rear wing, so the finished shell gains extra depth once painted and detailed. Stickers and masking stickers support the paint job and help place the Cliff race livery with crisp separation lines. The TT-01 Type-E platform places the drivetrain in a balanced bathtub frame, a layout widely used for approachable electric touring car builds. Silver ABS dish wheels complete the period race look and sit neatly under the broad fenders of the Calibra V6 body. This assembly kit suits focused build sessions as much as driving time, with each stage moving from body finishing to chassis setup in a clear sequence. On smooth tarmac and similar on-road surfaces, the long wheelbase, 4WD system and touring car proportions combine into a planted, circuit-style driving feel. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Opel Kadett GT/E Rally, RC assembly kit

€154.99

The 1:10 Opel Kadett GT/E Rally assembly kit pairs a classic 1970s rally coupe with the adaptable MB-01 chassis for a build that combines scale presence and tunable drivetrain layout. Its clear polycarbonate bodyshell recreates the Opel Kadett GT/E in the works Opel Eurohändler team color scheme, with an overall length of 417 mm, width of 174 mm and height of 138 mm. This version uses the long 239 mm wheelbase and an MR layout with a midship rear motor and rear-wheel drive. The compact MB-01 platform also allows changes between front-wheel drive and rear-wheel drive by altering the attachment directions of the final gears and steering linkage while keeping the battery pack, motor and R/C equipment on the center frame. For rear-wheel-drive setups, the motor position can be selected low or high. Unitized sections for the motor mount, final gears and suspension keep the structure organized during the build and simplify maintenance after running sessions. Front and rear 60 mm tires suit the on-road character of the chassis, and 60D tires are specified for tire changes. The kit includes a 540 motor, an electronic speed controller, a clear body and manual. Radio gear, a battery pack, a charger and paints are required separately. The unpainted bodyshell leaves room for a faithful finish based on the rally livery shown in the kit design.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Peugeot 306 Maxi, RC assembly kit, BT-01

€184.99

The 1:10 Peugeot 306 Maxi RC assembly kit combines rally hatchback character with the adaptable BT-01 chassis, creating a model that looks purposeful on the bench and composed on on-road circuits. Its 404 mm length, 187 mm width and 155 mm height give the compact body a full, planted presence, while the standard 257 mm wheelbase matches the recommended FF layout used for this version. The bodyshell recreates the Peugeot 306 Maxi in lightweight polycarbonate, and separate molded parts add the side mirrors and rear wing as distinct exterior details. New markings are supplied for this release, while the livery graphics are Tamiya originals. Under the shell, the 2WD BT-01 platform is built around unitized sections for the motor mount, final gears and suspension, which helps keep the structure organized during assembly and maintenance. The center frame allows drivetrain changes by switching the attachment directions of the final gears and steering linkage, and rear-wheel-drive setups can use either a front motor or midship rear motor position. Radio gear, a battery pack and a charger are required separately. On the road, the combination of racing radial tires, double wishbone suspension and friction dampers suits smooth tarmac driving and repeated practice sessions. The detailed rally shape, separate aero parts and original markings also give the finished car a strong shelf presence between runs.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Peugeot 306 Maxi, RC assembly kit, BT-01

€189.99

This 1:10 R/C assembly kit captures the Peugeot 306 Maxi with the compact stance, widened fenders and roof spoiler that defined the rally car. The lightweight polycarbonate bodyshell comes pre-painted in Brilliant Blue with Smoke windows, and the pre-cut wheel arches plus pre-made body mount holes reduce body preparation before the chassis setup begins. At the center is the 2WD BT-01 chassis, built around a layout that can be reconfigured for 2 wheelbases and for front- or rear-wheel drive. The center frame keeps the battery pack, motor and R/C equipment positions together while changes to the final gear attachment direction and steering linkage switch the drivetrain layout. For rear-wheel drive cars, the motor position can be selected as front motor or midship rear motor. The chassis uses 4-wheel double wishbone suspension with a symmetrical structure and friction dampers, and unitized sections for the motor mount, final gears and suspension support organized assembly and maintenance. Overall dimensions are 404 mm long, 187 mm wide and 155 mm high, with a 257 mm standard wheelbase on this version. The included 540 Torque Tuned motor and electronic speed controller establish the drive package for a focused build with clear mechanical character. Radio gear, a battery pack and a charger are required separately. On the bench or in running sessions, the combination of rally bodywork and configurable BT-01 architecture gives this Peugeot 306 Maxi a strong link between scale detail and chassis experimentation.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR 2.8, RC assembly kit

€194.99

This 1:10 RC assembly kit pairs the unmistakable shape of the Porsche 911 Carrera RSR 2.8 with the adaptable BT-01 chassis, creating an on-road model that combines classic racing style and configurable mechanical layout. The lightweight polycarbonate body captures the low roofline, wide rear arches and purposeful silhouette in a form that suits both careful building sessions and finished shelf presence. At 457 mm long, 204 mm wide and 138 mm high, the model uses a 251 mm short wheelbase that matches the compact proportions of the full-size racer. The 2WD BT-01 platform is designed around changeable drivetrain architecture: attachment directions for the final gears and steering linkage can be altered to switch between front- and rear-wheel drive, while rear-wheel-drive builds can use either FR or MR motor position. Symmetrical 4-wheel double wishbone suspension and friction dampers give the chassis a clean, technical layout, and unitized sections for the motor mount, final gears and suspension keep the structure organized during the build and later maintenance. Silver wheels with a narrow front and wide rear arrangement reinforce the period racing look, and the separate red wheel caps add another layer of visual detail. A separate molded side mirror finishes the body shell with a distinct scale touch. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 Carrera RSR 2.8, RC assembly kit

€199.99

This 1:10 R/C assembly kit captures the compact racing shape of the Porsche 911 Carrera RSR 2.8 on the BT-01 chassis, pairing classic motorsport lines with a configurable 2WD layout. At 457 mm long, 204 mm wide and 138 mm high, the model has a planted on-road presence, while the lightweight polycarbonate bodyshell keeps the form crisp and detailed. The BT-01 center frame is designed so the battery pack, motor and R/C equipment can stay in place while the attachment directions of the final gears and steering linkage are changed to switch drive layout. Rear-wheel drive cars can also use front motor or midship rear motor positions, which gives the chassis a broader tuning range within one platform. Symmetrical 4-wheel double wishbone suspension and unitized sections for the motor mount, final gears and suspension keep the structure organized for assembly and maintenance. The body arrives pre-painted in PS-1 White, with PS-31 Smoke on the windows. Silver wheels with a narrow front and wide rear format reinforce the period racing look, and the slick tire setup suits smooth-surface running. Separate red wheel caps and a separate molded side mirror add finishing detail that stands out when the car is lined up on a shelf or set down for a session on asphalt. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Porsche 911 GT3 992, RC assembly kit, TT-02

€184.99

This 1:10 R/C model assembly kit brings the Porsche 911 GT3 992 into a hobby format with a sharply formed polycarbonate body, separate rear wing and separate light cases. At 467 mm long, 188 mm wide and 131 mm high, the finished car has the low, stretched proportions that make the full-size GT3 instantly recognizable on the bench and in motion. The TT-02 chassis gives the model a 251 mm S-size wheelbase and a shaft-driven 4WD layout, pairing straightforward construction with a platform known for adaptable setup options. Separate black molded parts depict the side mirrors and wing stays, adding extra definition where painted body shells often flatten smaller details. Dark gun metal dish wheels sit under the body with a purposeful fit, and the included Urethane Bumper L supports the front end during running. The kit also comes with stickers and masking stickers, helping the paint scheme and exterior markings land with cleaner edges. During assembly, the separate wing, light cases and mirror parts create a more layered finish than a one-piece shell alone. Once built, the 4WD layout, radial tire setup and 251 mm wheelbase suit repeated laps on paved sections, car park courses and mixed club surfaces. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Porsche 911 GT3 R (992), RC assembly kit

€194.99

The Porsche 911 GT3 R (992) arrives here as a 1:10 R/C model assembly kit built on the TT-02 platform, combining a recognisable GT racing silhouette with a chassis layout made for accessible setup and consistent on-road driving. At about 479 mm long, 188 mm wide and 127 mm high, the finished car has the low, stretched stance that suits circuit-style running and shelf presence alike. Its polycarbonate bodyshell is pre-painted in Black and Gun Metal, with Smoke windows, a black rear wing and black light cases already finished for a clean race-ready look. Separate black parts depict the side mirrors and wing stays, adding extra definition to the body shape without turning the build into a paint-heavy project. The set also includes Item 51226 Urethane Bumper L for the TT-01 and TGS, fitted to help protect the body during regular running. Stickers and masking stickers are supplied for added detail in the finishing stage. Under the shell, the shaft-driven 4WD layout works with the short 251 mm wheelbase to keep the car composed through bends and direction changes. Black 10-spoke wheels and slick tires suit paved surfaces and complete the GT race character. The included instructions support the assembly process, while radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 RC 1000 TCR Berlina Corse, RC assembly kit

€164.99

This 1:10 RC assembly kit pairs the compact Fiat Abarth 1000 TCR Berlina Corse with the MB-01 chassis, creating a model that combines classic touring-car character with a highly adjustable 2WD layout. The clear polycarbonate bodyshell captures the widened fenders, compact proportions and racing stance in a lightweight form suited to hobby assembly. At the core is the multi-purpose MB-01 platform, which can be built with 209 mm, 224 mm or 239 mm wheelbase settings and configured for either front- or rear-wheel drive, giving 6 total setup patterns. Rear-wheel drive layouts also allow a choice of low or high motor position, adding another layer of chassis tuning. Unitized sections such as the motor mount and final gears simplify maintenance access and keep setup changes straightforward. A 540 motor and electronic speed controller are included, and the standard 29T pinion gear gives a 5.83:1 gear ratio. The symmetrical 4-wheel double wishbone suspension uses friction dampers, and the chassis is also compatible with many Hop-Up Option parts for M-chassis and TT-chassis cars. On the finished car, the front 55 mm tires and rear 60D tires echo the staggered tire sizing of the original racer and give the model a distinct stance on the track. Radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 Renault Alpine A110 Jaeger RC assembly kit

€164.99

This 1:10 RC assembly kit recreates the Renault Alpine A110 Jaeger in its 1973 racing livery on the M-06 platform, combining a compact coupe silhouette with rear-wheel drive proportions. At 395 mm long, 168 mm wide and 121 mm high, the finished model has a low, planted stance, while the 210 mm wheelbase keeps the classic short-wheelbase layout true to the subject. The bodyshell uses 1.0 mm polycarbonate, and the separate detail parts let the front and rear sections stand out with more definition after painting and final assembly. Stickers are included for sponsor logos, race numbers and other markings, and masking stickers support clean window and light areas during the paint process. The orange Jaeger livery links the model to the Alpine A110 that raced in period circuit competition, while the coupe form reflects the lightweight original introduced in 1963. Radio gear, a battery pack, a charger and paints are required separately. On the bench, the shell offers a focused finishing sequence with trimming, painting and decal placement before mounting to the chassis. Once assembled, the RR layout, short wheelbase and axle-specific tire combination give the model a distinct driving character for home tracks, club sessions or display between runs.

Off-road RC cars

1:10 Sand Scorcher 2010, RC buggy, 2WD kit

€394.99

The 1:10 Sand Scorcher 2010 brings the rounded Baja buggy silhouette from the original 1979 release into an R/C assembly kit with rear-wheel drive 2WD mechanics and a detailed body shell. On sand and loose dirt, the layout combines the long-travel off-road stance with the direct feel of a classic buggy chassis, creating a model that looks distinctive even before the first run. The body is molded in white polystyrene and reproduces the one-make race buggy style seen at the Baja 1000 in California, while the kit also includes a polycarbonate body in the listed scope of delivery. A transparent mechanism case covers the R/C components and battery area, keeping the internal layout visible while shielding the running gear from dirt thrown up by the tyres. The chassis uses 4-wheel independent suspension with a front double trailing arm setup and rear swing axle arrangement, giving each corner room to work over broken ground. Reinforced front uprights add support at the steering end, and the 3-piece center-lock wheels carry grooved front tyres with ribbed rear tyres for terrain-specific grip. During outdoor running, the Sand Scorcher shows its character in broad slides, quick direction changes and the lifted stance of a desert racer. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Skyline GT-R (R32), RC assembly kit, TT-02D

€234.99

The 1:10 Skyline GT-R (R32) RC assembly kit pairs the unmistakable shape of Nissan's 1989 performance icon with the TT-02D drift chassis for on-road driving that favors angle, control and scale presence. At 452 mm long with a 257 mm wheelbase, the finished car carries the long, low proportions of the R32 clearly across the body shell. The body is formed in lightweight polycarbonate and uses separate molded parts for the side mirrors and rear wing, so the shell keeps crisp exterior definition beyond the main molding. Marking stickers add the final exterior graphics, and export versions of the kit include LEDs. Under the shell, the TT-02D is the drift-spec version of the shaft-driven 4WD TT-02 entry chassis and is compatible with TT-02 option parts. The setup combines 24 mm drift tires, mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and an aluminum motor heat sink to support repeated on-road drift runs with stable response. This assembly kit suits bench building as much as driving time, with body trimming, painting and decal placement shaping the final finish before the chassis takes to smooth tarmac. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 Super Avante, RC assembly kit, 4WD

€349.99

The 1:10 Super Avante RC assembly kit pairs the TD4 chassis with a low, futuristic buggy form built for fast off-road running. Shaft-driven 4WD and a midship transverse motor layout give the chassis a balanced power path, while the blue and yellow body, rear wing and yellow wheels create a sharp racing presence on dirt and gravel. At the front, the inboard suspension works through push rods and rocker arms that actuate laid-down oil dampers, a layout more often seen in competition-focused designs. The rear end uses 4 CVA oil dampers, and both front and rear suspension systems are independent double wishbones. Sealed front and rear gearboxes with built-in ball differentials support consistent drivetrain action when the surface turns loose or uneven. The polycarbonate body shell is joined by separate front and rear fenders and a rear wing, giving the buggy its distinctive Super Avante silhouette. Radio gear, a battery pack, a charger and paints are required separately. On a compact dirt track, the knobby tyres and 4WD layout support repeated launches, braking points and quick line changes. Open gravel sections and uneven ground let the suspension travel, oil dampers and sealed driveline show their strengths in sustained running sessions.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 T/GR Yaris Rally1 Hybrid, RC assembly kit

€159.99

This 1:10 RC assembly kit brings the T/GR Yaris Rally1 Hybrid onto the TT-02 platform with a polycarbonate bodyshell that captures the compact, aggressive rally silhouette in 416 mm length, 190 mm width and 146 mm height. Separate polycarbonate front light cases add layered detail to the nose, while the 257 mm wheelbase gives the chassis the proportions required for this body style. Black molded parts reproduce the side mirrors, side ducts, caps and the 2-piece large rear wing, adding the distinct aero elements seen on the full-size rally machine. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward longitudinal layout that keeps the drivetrain centered and supports stable running characteristics. Dark gun metal multi-spoke wheels and racing radial tires complete the stance, while the included urethane bumper supports body fitment at the front. The box also provides stickers and masking stickers for the paint job, helping the livery and window areas come out with cleaner separation. On the bench, the kit offers a focused build with body finishing, chassis assembly and detail fitting all tied to one clearly defined rally subject. Once assembled, the combination of the Torque-Tuned motor and ESC supports brisk running sessions on paved ground, while radio gear, a battery pack, a charger and paints are required separately.

On-road RC cars (2WD/4WD)

1:10 TA08 PRO Chassis Kit, RC touring car kit

€349.99

The TA08 PRO Chassis Kit is a 1:10 R/C touring car chassis built around a stepped-V layout that balances rigidity with weight distribution for composed on-road running. Its battery pack and servo are mounted on a slight 10 degree angle, reducing surface contact and helping the chassis settle cleanly through direction changes. A spur gear positioned in front of the motor contributes to stable drivability, while the 2 belt-driven 4WD system works with TRF420 gear differentials and steel TA07 differential joint cups. Super Short Big Bore dampers, universal shafts and full bearings add further mechanical precision across the rolling platform. The A-arm suspension layout keeps the center of gravity low, and camber plus caster settings can be adjusted with turnbuckle shafts and lower arm spacers to refine the setup for track conditions. Body mounts rotate by 180 degrees to switch between standard and 2 mm advanced body positions, adding another tuning option when matching the chassis to a shell. This kit suits bench setup, circuit tuning and repeated on-road sessions where drivetrain response, suspension geometry and chassis balance all matter. R/C equipment, a motor, a battery pack, tires and a body are required separately.

RC buggys (2WD/4WD)

1:10 The Grasshopper Black Edition, RC buggy

€114.99

The Grasshopper Black Edition brings the classic Tamiya off-road silhouette into 1:10 scale with a darker visual treatment that gives the buggy a crisp, purposeful presence in motion and at rest. As a radio-controlled ground vehicle, it combines the recognisable single-seat racer shape with hands-on driving input, creating a model that stands out both as a build and as a running machine. The Black Edition designation shifts the look away from the standard finish and places more emphasis on the body form itself, so the buggy reads clearly from nose to rear wing. The 1:10 format gives the model a substantial footprint for steering, throttle control and line choice across smooth outdoor surfaces. Battery-powered operation is part of the driving concept, while batteries are not included. The data identifies this version as part of Tamiya's powered vehicle range, placing it firmly in the RC hobby space rather than static display alone. On a paved path, patio or similar open area, the buggy format lends itself to repeated starts, direction changes and short runs that keep the radio-control experience active. Between driving sessions, the dark finish and familiar Grasshopper profile also give the model a strong shelf presence for collectors who appreciate long-running RC names.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Grasshopper i 2005, RC buggy kit, 2WD

€119.99

The Grasshopper i 2005 brings classic 1:10 RC buggy style into a build centered on rear-wheel-drive action, a lightweight 830 g layout and the unmistakable stance of an 80s-inspired off-road racer. Its polycarbonate body, detailed illustrated assembly instructions, electronic speed controller and 380 electric motor come in the kit, creating a clear starting point for hands-on assembly and outdoor running. The chassis measures 389 mm long, 223 mm wide and 135 mm high, giving the buggy a low, planted profile with enough width for stable tracking on loose ground. At the front, independent swing axle suspension handles steering inputs with visible mechanical movement, while the rolling rigid rear axle preserves the original Grasshopper character. A sealed rear gearbox helps protect the differential gear when the buggy is driven on dirt and other rough surfaces. The chassis is also compatible with a 540 type motor sold separately, which opens the door to a later power change without changing the model identity. On compact off-road courses, packed gravel or smooth tarmac, the 2WD layout creates a direct connection between throttle input and rear traction. The illustrated build process suits hobby sessions at the workbench, and the finished buggy carries that same mechanical clarity into running sessions where suspension travel, tyre stance and classic racing lines stay fully visible. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Grasshopper II, RC buggy assembly kit

€119.99

The Grasshopper II returns in this 2017 1:10 R/C buggy assembly kit with the lean proportions, exposed suspension and rear-drive layout that made the original late-1980s machine so distinctive. At 400 mm long, 221 mm wide and 139 mm high, the model carries a compact off-road stance that looks right at home carving across packed dirt and loose gravel. An ABS resin bathtub chassis forms the core structure, keeping the running gear organized in a simple, accessible layout. The kit uses a 2WD drivetrain and a fully enclosed rear gearbox, so the differential works inside a protected housing while the rear axle delivers power to the ground. One-piece 8-spoke wheels pair with ribbed front tyres and spike rear tyres, a classic buggy combination that separates directional control from traction. A 380 size motor and electronic speed controller are included, and the platform is also compatible with selected tune-up parts such as standard Type 540 motors and CVA mini oil dampers. The white polystyrene resin body gives painting and decal work a crisp base, and the included driver figure adds cockpit detail once attached to the shell. Radio gear, TS spray paint, a 7.2 V battery and a compatible charger are required separately. On a garden path, hard-packed track or dusty open ground, the suspension movement, rear-drive balance and period buggy styling come together in a model that suits both display between runs and regular outdoor driving sessions.  Warning! Not suitable for children under 14 years.

RC buggys (2WD/4WD)

1:10 The Hornet 2004, RC buggy kit, 2WD

€134.99

The Hornet 2004 brings classic off-road buggy form into a 1:10 RC assembly kit with a long, low stance and rear-wheel drive layout built for loose surfaces. At 400 mm long, 230 mm wide and 150 mm high, the chassis cuts a recognisable silhouette on dirt tracks, with the clear polycarbonate body and rear wing giving the finished model its period racing look. The bathtub frame chassis uses side bumpers to shield the main structure during close running, and the reinforced resin bumper adds another contact point at the nose. Weight comes in at 874 g, keeping the buggy light enough for quick direction changes while the sealed gearbox encloses the differential area against dust and grit. The kit also includes a TEU-101BK electronic speed controller, and the original 3-piece wheels leave room for optional ball bearings if a later upgrade is planned. A driver figure sits in the cockpit to complete the visual finish without turning the build into a static display piece. On compacted dirt, loose gravel or a backyard track, the front ribbed tires guide turn-in while the spiked rear tires dig in under acceleration. Radio gear, a battery pack, a charger and paints are required separately.

Off-road RC cars

1:10 Toyota 4x4 Pick Up Bruiser 2012 RC kit

€819.99

This 1:10 RC assembly kit recreates the Toyota Hilux Pick-Up RN36 with the tall, high-lift stance that made the 1980s truck so distinctive. At 525 mm long, 278 mm wide and 275 mm high, the model carries real visual presence, while the ladder frame layout brings the structure of the full-size vehicle into the build itself. The chassis uses a longitudinally mounted Type 540 motor, a shaft-driven 4WD system and front and rear 6-pinion differential gears. Gear ratios of 54.63:1 in 1st, 40.49:1 in 2nd and 27.92:1 in 3rd define how the 3-speed transmission changes the driving feel across terrain. Front tread measures 200 mm, rear tread 218 mm, and the complete model weighs 3.2 kg. Metal parts are used throughout for a strong mechanical look, and the live axle setup reflects the full-size truck with metal axle housings, leaf springs and oil dampers. The detailed body, flared fenders and large tyres suit shelf display just as naturally as outdoor running on loose ground. Radio gear, a battery pack, a charger, transmitter batteries and an electronic speed controller are required separately.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

This 1:10 RC assembly kit brings the Toyota Celica GT-Four RC (ST185) onto the TT-02 platform with a bodyshell that carries the coupe's curved profile, rear wing, side mirrors and distinctive rally-era character. At 450 mm long, 187 mm wide and 136 mm high, with a 257 mm wheelbase, the finished car has the proportions to fill the chassis cleanly and present the Celica shape with convincing scale presence. The bodyshell uses 1.0 mm polycarbonate, keeping weight low while allowing the painted finish and sticker set to define the model's exterior details. Masking stickers are supplied for the window areas, helping the paint job stay crisp around the glazing lines. Under the shell, the shaft-driven 4WD TT-02 chassis uses a straightforward drivetrain layout that suits regular on-road running and setup work alike. An included Type 540 Torque-Tuned motor and ESC complete the core drive package for electric RC use. 5-spoke wheels and tread pattern racing radial tires reinforce the road-going look and match the Celica's classic performance style. On a smooth car park, club track or driveway, the combination of 4WD traction and the TT-02 layout supports controlled cornering and clean acceleration. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Celica GT-Four RC, RC assembly kit

€154.99

The 1:10 Toyota Celica GT-Four RC assembly kit brings the shape of the ST185 to the TT-02 platform with a pre-painted 1.0 mm polycarbonate bodyshell, white finish, smoke-tinted windows and a full-size stance set by the 257 mm wheelbase. At 450 mm long, 187 mm wide and 136 mm high, the model carries the proportions of the homologation road car into an on-road R/C format with clear visual presence. The TT-02 chassis uses a shaft-driven 4WD layout and front and rear double wishbone suspension with coil spring dampers, giving the running gear a straightforward, widely used base for tuning and maintenance. Pre-cut wheel arches and pre-made body mount holes reduce body preparation work, while stickers and masking stickers support the final exterior finish. The bodyshell still requires cutting out, attachment work and detail painting on selected parts. Cockpit parts and driver are not included. On-road sessions highlight the long, curved body lines, rear spoiler and 5-spoke wheel design as the car tracks through sweepers and tighter sections. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota GR 86, RC assembly kit, TT-02

€154.99

The 1:10 Toyota GR 86 brings modern coupe styling to a radio control build centered on the TT-02 chassis, a shaft-driven 4WD platform made for on-road running. Its 257 mm wheelbase gives the body its correct stance over the chassis, and the low, wide shape reads clearly whether the car is lining up for a first shakedown run or sitting on the bench between build stages. The body is formed in polycarbonate and arrives as an assembly kit, so the shell is trimmed, painted and finished with markings during the build. Separate sidemirrors, light cases, masking stickers and body fittings add definition to the final look, while the body mounts are adjusted so the shell clears the tyres and track surface correctly. Front and rear suspension geometry is handled by double wishbones with coil spring damping, a layout that supports predictable handling on paved surfaces. The package also includes an electronic forward and reverse speed controller. Radio gear, a battery pack, a charger and paints are required separately. On the workbench, the GR 86 body gives the build a clear sequence of cutting, masking and finishing steps that show off the model's detailed lines. Once assembled, the TT-02 platform suits car park sessions, smooth tarmac circuits and other paved spaces where a 4WD touring chassis can stretch out cleanly.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€264.99

This 1:10 RC assembly kit recreates the Toyota Land Cruiser 40 with the upright proportions and expedition character that made the original 4WD so distinctive. At 390 mm long, 198 mm wide and 237 mm high, the model has a substantial trail-ready presence, and the polycarbonate body keeps the shell light while preserving the crisp, boxy silhouette of the 1972 FJ40V. Under the body sits the CC-02 cross country chassis, developed for off-road driving and built around a ladder frame layout inspired by full-size vehicles. The 252 mm M-size wheelbase sets the proportions, and short 76 mm propeller shafts are included as part of the drivetrain package. Separately molded roof rack and light pod parts extend the scale look above the body line, while the detailed shell is joined by grille, mirror and indicator components that sharpen the finished appearance. A Type 540 motor and included ESC complete the core running hardware. The clear body is supplied unpainted, leaving room for a custom finish on domestic or export style builds. Radio gear, a battery pack, a charger and paints are required separately. Once assembled, the combination of block tread tires, scale bodywork and cross-country chassis layout suits rocky paths, compacted dirt and shelf display between running sessions.

Off-road RC cars

1:10 Toyota Land Cruiser 40, RC assembly kit, CC-02

€274.99

The 1:10 Toyota Land Cruiser 40 assembly kit brings classic 4WD character to the CC-02 platform with a yellow pre-painted body and the upright proportions of the 1972 FJ40V. At 390 mm long, 198 mm wide and 237 mm high, the model has the tall, square stance that makes the Land Cruiser 40 instantly recognizable on a trail course or shelf. The polycarbonate bodyshell keeps weight down, while separate molded parts add definition to the grille, mirrors, turn signals and roof rack with light pods. A 252 mm M-size wheelbase sets the proportions on the chassis, and the included 76 mm short propeller shafts match the layout. Oil-filled dampers support the chassis over uneven ground, and the ladder frame construction follows the full-size vehicle theme with a structure suited to cross-country driving. Silver 12-spoke wheels and block pattern tires complete the period look, and the sticker set combines window and window frame sections to reduce extra paint work during finishing. Cockpit parts and a driver figure add another layer of scale detail once the body is completed. The finished model suits slow trail sessions, obstacle lines and display between runs, with the roof rack, raised ride height and classic Land Cruiser shape giving it a strong presence in each setting. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra (JZA80), RC assembly kit, BT-01

€184.99

The 1:10 Toyota Supra (JZA80) RC assembly kit combines the long, low shape of Toyota's 1993 flagship sports car with the adaptable BT-01 platform for a build that stays engaging well beyond the first setup. At 457 mm long, 185 mm wide and 135 mm high, the finished car carries a strong on-road stance, while the 257 mm wheelbase gives the Supra body its stretched, planted proportions on the chassis. The BT-01 center frame is designed so battery pack, motor and R/C equipment can stay in place while drivetrain layout changes are made around them. By changing the attachment directions of the final gears and steering linkage, the chassis can be reconfigured between front-wheel drive and rear-wheel drive layouts. For rear-wheel drive, both front motor and midship rear motor positions are available, giving 6 total setup patterns across the platform. A Type 540 Torque-Tuned motor and ESC are included, and many Hop-Up Option parts for TT-chassis cars can be used for further tuning. That combination suits builders who enjoy comparing chassis behavior on the same body shell instead of moving to a completely different car. On-road sessions, setup testing and workshop adjustments all gain extra depth from a platform that can be rebuilt around different drive and motor positions while keeping the Toyota Supra (JZA80) identity at the center of the project.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Toyota Supra, RC assembly kit, TT-02D

€194.99

The 1:10 Toyota Supra on the TT-02D platform brings a well-known sports car shape into a drift-focused RC assembly kit with a 257 mm wheelbase and a detailed polycarbonate bodyshell. The body traces the aggressive lines of the original release from kit 58392, and carbon pattern decals for the engine hood and rear wing add a tuned street-racing look once the shell is finished. This version uses the TT-02D drift spec, a specially tuned form of the TT-02 chassis built around shaft-driven 4WD. Separately molded side mirrors and rear wing parts add extra scale definition, while an aluminum motor heat sink supports the included 540 SPORT TUNED motor during running. An electronic speed controller is included in the kit, so the core drive package is already matched to the chassis layout. The 24 mm Drifttech tires sit on metal-plated mesh wheels, giving the model the right contact patch and visual style for drift sessions. On a smooth indoor surface or a prepared hobby track, the combination of drift tires, oil dampers and the TT-02D layout supports long slides, quick direction changes and steady transitions. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:10 Toyota Tundra HighLift, RC assembly kit

€559.99

The 1:10 Toyota Tundra HighLift brings the shape of the second-generation double cab pickup into an RC assembly kit with a tall stance, large-diameter tyres and a chassis layout that follows the full-size truck closely. At 500 mm long, 216 mm wide and 238 mm high, the model has a broad road presence, and the combination of an injection-moulded bodyshell and exposed underframe gives it a convincing scale look whether it is parked on a shelf or moving over rough ground. Much of the character comes from the construction itself. Metal parts are used for the ladder frame, leaf springs and friction dampers, so the running gear has the same visual weight as the body above it. An RS540 motor and ESC handle the drive, while the 3.1 kg chassis gives the truck a planted feel. The set also contains custom parts including a roll bar, grille guard and roof carrier with 2 snowboards, allowing different finished looks without changing the core truck design. The 3-speed gearbox and shaft-driven 4WD suit slow trail sections, uneven surfaces and more open stretches where the taller ratio can be used. On a workbench, the detailed mechanical layout keeps the build engaging; on the ground, the long frame, rigid axles and pickup proportions create the unmistakable presence of a lifted truck. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TRF421X Chassis Kit, RC assembly kit

€799.99

The 1:10 TRF421X Chassis Kit is a 4WD competition chassis built for precise setup work and consistent lap-by-lap response. Numerous aluminum and carbon parts shape a focused platform, while the systematic evolution from the TRF421 brings an optimized suspension layout and a lower center of gravity into the heart of the build. A new aluminum motor mount places the motor 1.04 mm lower than on the TRF421 chassis kit, and the machined 2.0 mm aluminum lower deck is designed around that deeper mounting position to balance chassis flex with weight distribution. Both one-piece and two-piece upper deck versions have been redesigned, and the one-piece deck uses sleeves, titanium flat-head screws, washers and 0-0.3 mm shims to fine-tune flex. New front double-cardan drive shafts work with rear lightweight aluminum universal shafts with bearings, while front direct couplers and rear oil-filled gear differentials manage the drivetrain. Updated front direct couplers and rear differential steel joints replace earlier aluminum parts in these areas. Track tuning goes deeper with a 1 mm narrower upper arm mount intake, bushings for pitch adjustment, and revised uprights with new axle hole positions. The front geometry creates a more direct Ackerman setting, while the rear tie-rod attachment point moves backward to support traction on low-to-medium grip surfaces. Precision stabilizers in 1.2 mm and 1.3 mm diameters, plus a 20 g receiver weight and a 0.6 mm battery weight at 30 g, extend setup options for changing track conditions. Radio gear, a battery pack, a charger, wheels, a bodyshell, a steering servo, an ESC and a motor are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 TT-02BR Chassis Kit Buggy, RC assembly kit

€339.99

The 1:10 TT-02BR Chassis Kit Buggy is an RC assembly kit built around the TT-02BR platform, an upgraded version of the TT-02B layout for off-road running and setup-focused tuning. A transparent Neo Scorcher body sits over a shaft-driven 4WD chassis with double wishbone suspension, full ball bearings and a 540 Torque-Tuned motor, giving the build a competition-style mechanical layout with clear room for adjustment. New aluminum propeller joints and a TT-02 aluminum propeller shaft work with plastic joint sections to limit wear at the joint cups during repeated running. Longer turnbuckle shafts, extended by 4 to 6 mm, help prevent deformation at the adjuster sections and support smoother suspension movement. Steering linkage with flange pipes uses hex head screws and lock nuts, and the chassis also features reinforced gear covers, lower suspension arms, a hard lower deck and aluminum rear uprights. Large dish wheels, spike tires and the tube frame chassis complete the off-road specification. The included carrying case keeps the TT-02BR chassis together between bench sessions and track days. Radio gear, a battery pack and a charger are required separately. The transparent body is supplied without Neo Scorcher coloring stickers, which leaves the finish open to an individual paint scheme.

On-road RC cars (2WD/4WD)

1:10 TT-02R Chassis Kit, RC assembly kit, 4WD

€199.99

The 1:10 TT-02R Chassis Kit is an RC assembly kit built around a race-focused 4WD platform with a compact 376 x 182 mm footprint. Blue anodized tuning parts, aluminum hardware and a low, open chassis layout give the build a technical look while keeping the mechanical details easy to follow on the bench and easy to read at the track. This R version adds lightweight aluminum rear uprights, an aluminum motor mount, an aluminum propeller shaft and aluminum joints to key areas of the chassis. The drivetrain also uses metal wheel axles and gearbox joint cups, while a urethane bumper sits at the front. Medium-narrow racing slicks measure 24 mm in width and work with the included wheels to suit circuit-focused running. The kit format leaves room for a chosen body style and electronics setup, while the TT-02 base keeps the layout familiar for tuning and maintenance. During assembly, the exposed suspension arms, steering linkages and central drivetrain make setup changes straightforward to understand. On a paved track, the chassis layout, slick tire format and damping hardware support clean lap work, repeated corner entries and focused tuning sessions. Radio gear, a battery pack, a charger, a motor and a body are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 Volkswagen Golf II GTI 16V, RC assembly kit

€164.99

This 1:10 R/C model assembly kit captures the Volkswagen Golf II GTI 16V in a compact hatchback form with a lightweight polycarbonate bodyshell and a long 239 mm wheelbase. At 383 mm long, 170 mm wide and 138 mm high, the model combines classic road-car proportions with a chassis layout built for hands-on assembly and tuning. Under the shell sits the MB-01 chassis in a front-motor, front-wheel-drive configuration. Its center frame allows changes between front- and rear-wheel drive by altering the attachment directions of the final gears and steering linkage, and rear-wheel-drive setups can also use a low or high motor position. The chassis also offers 3 wheelbase choices, giving broad scope for layout changes within the same platform. A 4-wheel double wishbone suspension with symmetrical structure and friction dampers manages movement at each corner, while unitized sections for the motor mount, final gears and suspension support straightforward maintenance. Separate black molded parts depict the side mirrors and bumpers, and transparent parts form the headlights and taillights for a more complete exterior finish. Porous dish wheels are paired with radial tires to match the road-car character of the subject. The bodyshell is not pre-painted. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 VW Beetle Rally, RC assembly kit, 4WD

€174.99

The 1:10 VW Beetle Rally pairs a classic rally silhouette with the MF-01X chassis, creating an RC assembly kit that looks distinctive on the bench and carries that character onto road and flat dirt. At 397 mm long and 163 mm wide, the model uses a 239 mm L wheelbase that gives the Beetle body its correct stance while leaving room for the shaft-driven drivetrain layout underneath. The clear polycarbonate shell recreates the Beetle's rounded form, and separate metal-plated parts are used for the bumpers and side mirrors. Front light pods and rally-style stickers shape the competition-inspired finish without changing the unmistakable Beetle profile. Under the shell, power from the Type 540 Torque Tuned electric motor is transmitted through gear differentials, with drive routed to the rear wheels and forward by propeller shaft to the front axle. The chassis can also be assembled into S and M wheelbases with separately sold propeller shafts. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. On smooth tarmac, the 4-wheel double wishbone layout helps the chassis stay composed through direction changes, while on flat dirt the rally block tires and independent suspension work with the shock absorbers to keep the model moving with control. The result is a build that combines detailed body finishing, mechanical layout and mixed-surface running in one focused RC project.

On-road RC cars (2WD/4WD)

1:10 VW Golf II GTI 16V, RC assembly kit, MB-01

€185.99

This 1:10 R/C assembly kit captures the Volkswagen Golf II GTI 16V in rally form on the MB-01 chassis, pairing a compact hatchback shape with a front motor, front-wheel drive layout. The lightweight polycarbonate bodyshell arrives pre-painted in PS-34 Red with PS-31 Smoke, so the body lines, window tint effect and overall stance come together quickly once mounted on the chassis. The model measures 383 mm in length, 170 mm in width and 138 mm in height, with a long 239 mm wheelbase that suits the MB-01 configuration used here. Separate black molded parts recreate the side mirrors and bumpers, while transparent components depict the headlights and taillights with added depth. A 540 torque-tuned electric motor and an electronic speed controller are included. The MB-01 platform also uses unitized sections for the motor mount, final gears and suspension, a layout that keeps the structure organized during assembly and later maintenance. On the bench, the combination of 4-wheel double wishbone suspension, friction dampers, porous dish wheels and radial tires gives the chassis a clear mechanical character. Once built, the compact proportions and FF drivetrain make it well suited to tight driving lines and flowing runs on smooth ground. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 VW Karmann Ghia, RC assembly kit, M-06

€174.99

The 1:10 VW Karmann Ghia RC assembly kit brings a classic coupe silhouette to the M-06 platform, combining vintage road-car character with a rear-wheel-drive chassis layout. Its lightweight polycarbonate body reproduces the flowing roofline and compact proportions of the original, while separate plated parts for the side mirror, bumpers and light cases sharpen the finished look. This version uses the 239 mm wheelbase M-06L chassis. The rear-mounted motor works with a longitudinal battery pack, and the R/C units sit on either side to keep the layout low and evenly balanced. That arrangement gives the chassis a low center of gravity and a composed feel through direction changes. Marking stickers and masking stickers are included for the paint job, allowing the exterior trim and lighting details to be finished with clean separation. Metal-plated wheels complete the period look and work with the tyre setup to support stable cornering. With overall dimensions of 410 x 182 x 125 mm, the model has enough size to show off the Karmann Ghia shape both on the bench and in motion. It suits builders who enjoy body finishing as much as chassis setup, and it leaves room for later tuning with Hop-Up Option parts available for the M-06 platform.

Off-road RC cars

1:10 Wild Willy 2000, RC assembly kit, WR-02

€199.99

The 1:10 Wild Willy 2000 RC assembly kit brings the animated stance of the mid-1980s original into a WR-02 chassis layout built for rough-terrain driving. Its larger tires, rear-wheel-drive setup and fitted wheelie bar create the signature wheels-up action, while the olive-drab body, roll cage, roof lights and seated driver figure give the model a strong off-road character on the bench and in motion. At 345 mm long, 270 mm wide and 270 mm high, the chassis carries a 170 mm wheelbase and a weight of 1,360 g without R/C units or battery pack. A Type 540 motor sits on the centerline with the battery position aligned through the middle of the monocoque frame, and power travels to the rear wheels through a fully enclosed gearbox. The drivetrain uses 3-bevel differentials and a 1:18.3 gear ratio. Front and rear tire width and diameter measure 113/70 mm, with tread figures of 265 mm at the front and 270 mm at the rear. Tires and wheels plus the gearbox and motor come pre-assembled. An electronic speed controller is included. Radio gear, a battery pack, a charger and paints are required separately. The WR-02 layout suits loose ground, packed dirt and uneven garden paths where the larger tire footprint and 4-wheel double wishbone suspension can work through bumps and ruts. On a smooth stretch, the wheelie bar lets acceleration turn into the upright Wild Willy pose that made the original such a standout.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 XM-01 Pro Chassis Kit, RC assembly kit

€294.99

The 1:10 XM-01 Pro Chassis Kit brings a compact M-chassis format to a shaft-driven 4WD rally platform with a front mid-ship longitudinal motor layout and a covered central chassis. Through the clear polycarbonate sections and newly molded bathtub frame parts, the design focuses on keeping the running gear shielded while maintaining the technical look of a dedicated competition chassis. The rear section can be configured to 210 mm, 225 mm or 239 mm wheelbase, which gives the chassis broad body compatibility within M-rally builds. Suspension mounts set caster angle at 5 degrees, and aluminum dampers are fitted front and rear to support composed movement over uneven surfaces. Front and rear universal drive shafts come as standard, while the drivetrain uses oil-filled gear differentials at both ends. Drive balance can be tuned with the supplied 39T and 40T differential gears by changing the front and rear combination. The center-left battery position uses a longitudinal upright layout for chassis balance, and the front bumper uses a skid angle to reduce surface contact. M-Chassis 11-spoke racing wheels are paired with 60D rally block tires, giving the platform the stance and tread pattern suited to loose-surface running. A low-profile servo is recommended for clearance under the front inner polycarbonate cover. Body, motor, battery pack and R/C equipment are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:10 XV-01 Lancia Delta HF Integrale, RC assembly kit

€284.99

The 1:10 XV-01 Lancia Delta HF Integrale brings classic rally form to a front-motor 4WD platform built for active driving. Its 407 mm length, 186 mm width and 155 mm height give the bodyshell a planted stance, while the 257 mm wheelbase supports stable tracking through sweeping turns and quick direction changes on mixed surfaces. This RC assembly kit pairs the XV-01 layout with an electric Type 540 motor and rally-focused running gear. Block tread tyres on white wheels suit the car's off-road character, and the electronics box groups the receiver and controller inside the chassis. Metal-plated side mirrors and grille parts add crisp finishing detail beyond the main shell. The decal sheet and painting aid support accurate body finishing, and the illustrated assembly instructions guide the build. Radio gear, a battery pack, a charger and paints are required separately. On a compact dirt course, gravel path or smooth tarmac with dust and debris, the enclosed drivetrain layout and adjustable geometry give the chassis room to be tuned for the surface in use. The result is a rally model that combines scale presence, hands-on building and chassis setup in one focused machine.  Warning! Not suitable for children under 14 years.

Model aircraft kits 1:72

1:100 Space Shuttle Atlantis, plastic assembly kit

€66.99

This 1:100 Space Shuttle Atlantis plastic assembly kit brings the NASA orbiter into a detailed scale build with a configuration based on the final Atlantis mission in July 2011. The finished shuttle can be shown with the payload bay open, creating a strong orbital display image with visible mission hardware inside the cargo section. Newly designed parts allow the build to represent equipment carried on that last flight, including the Raffaello Multipurpose Logistics Module, the Orbiter Docking System, the Lightweight Multipurpose Experiment Support Structure Carrier and the Orbiter Boom Sensor System. The payload bay doors open, and the detachable MPLM can be placed in the bay to show the shuttle in a loaded mission setup. Main engine nozzles are movable, adding another mechanical detail to the completed orbiter. Markings also support alternate finishes for Discovery and Endeavour, expanding the finishing options within the same 1:100 scale kit. A display stand is included for ground or in-flight presentation, and 2 astronaut figures add extra scale reference around the completed shuttle. Assembly time is stated as 600 minutes. Cement, paint and tools are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 1199 Panigale S Tricolore, model kit

€53.99

This 1:12 scale assembly kit depicts the Ducati 1199 Panigale S Tricolore, a commemorative version finished in the red, white and green scheme of the tricolore italiano national flag. The finished model brings the sharp, compact form of the superbike onto the workbench with a subject that stands out through both color and engineering. A key feature of the original machine was its 1,198cc L-Twin engine, and that same layout gives the model much of its visual identity. The design also reflects the bike's monocoque frame concept, where the engine is integrated into the structure rather than hidden within a conventional frame layout. The swing arm and damper unit connect directly into this arrangement, helping the replica communicate what made the full-size motorcycle such a notable design. With assembly required and a stated build time of 600 minutes, the kit supports a more involved build centered on the mechanical form of the bike. On the bench, the model suits builders who enjoy motorcycles with visible engineering and a strong real-world story behind the livery. Once completed, the Tricolore scheme and compact 1:12 proportions give the replica a striking presence for shelf display or close-up appreciation of the bike's structure.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati 916 Desmo. 1993, motorcycle model kit

€35.99

This 1:12 motorcycle model kit captures the Ducati 916 Desmo. 1993 with the sharp bodywork, low front cowl and race-bred stance that made the original machine stand out at the 1993 Milan Motor Show. The finished replica brings together the distinctive fairing shape, dual headlamp layout and the sculpted tank and seat section in a display scale that gives each line room to read clearly. At the center of the build is a detailed 916cc liquid cooled L-twin engine with Ducati's Desmodromic valve system, a layout that uses cam operation for both opening and closing the valves. The chassis reflects the original machine's engineering with a chrome molybdenum steel tubular frame, a mono-arm rear swing arm and a front fork assembly that builds up from separate components. Showa shock absorbers and Brembo brake calipers are part of the source machine specification represented by the model, alongside the aerodynamic cowl with engine air intake openings. Assembly time is stated as 600 minutes. Paints, cement and tools are required separately. During the build, the model moves through clearly defined subassemblies such as engine, exhaust, front fork, rear wheel, cowling and mirrors, giving each stage its own visual character on the workbench. Decals and detail painting add the final layer to the Ducati markings, while the completed motorcycle on its stand suits shelf display alongside other 1:12 scale road and racing machines.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati Desmosedici #65, assembly model kit

€50.99

This 1:12 assembly model kit captures the 2004 Ducati Desmosedici #65 with the lean, aggressive form of a MotoGP racing motorcycle and the mechanical detail that makes the full machine rewarding to study on the bench. The layout follows hallmark Ducati engineering, pairing the truss frame with a V4 engine and a rear suspension swing arm attached directly to the crank case. Fine finishing details give the model much of its character. Plastic tubing is used to depict the accelerator, clutch and brake wiring, so the control areas read with the layered look of a real race bike rather than a simplified shell. The assembled motorcycle also supports an open display style: the side and seat cowling can be removed after assembly to expose the engine area and change the presentation from streamlined fairing view to mechanical cutaway effect. Assembly is required, with a stated build time of 600 minutes. On a shelf, in a display cabinet or beside other racing motorcycle builds, the synthetic rubber slick tires and sharply defined bodywork help the Ducati hold a convincing competition stance. The kit contains the assembly model kit itself. Due to sponsor's request, white marking decals are not included with this kit.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Ducati Superleggera V4, model kit, Racing Kit

€55.99

This 1:12 scale model kit captures the Ducati Superleggera V4 in its Racing Kit specification, translating the motorcycle's track-focused conversion into a compact build with crisp visual contrast and competition hardware. At 176 mm long and 98 mm high, or 198 mm long with the racing stand fitted, the finished machine carries a low, purposeful silhouette that reads clearly on a shelf or in a display case. The racing conversion is expressed through dedicated parts such as the open carbon fiber clutch cover, racing filler cap, brake lever guard and side mirror hole covers. Right and left cowling caps, a carbon fiber swingarm cover with titanium slider, and the removed number plate treatment all help define the circuit setup. The clutch is split into 2 parts for simplified paint separation, and the parts breakdown is designed for smooth, precise assembly. Carbon fiber patterns are represented by decals, allowing the bodywork and selected components to reflect the layered finish of the full-size machine. On the bench, the model offers a focused painting and decal application project with clear visual changes between road and circuit specification. Once completed, the stand, slick tire setup and racing details give the motorcycle a paddock-ready presence suited to display alongside other 1:12 scale bikes or as a single centerpiece.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Front Fork Set CBR1000RR-R Fireb., model kit

€30.49

This 1:12 Front Fork Set CBR1000RR-R Fireb. is a Detail-Up model kit created to give a motorcycle build a more intricate front end. Gold color anodized aluminum outer tubes and reservoirs combine with gold color plated brass inner tubes to bring a crisp metal contrast to the fork area, while the yellow coil spring adds a visible accent within the assembly. The set is intended for 300014138 and focuses on the fork structure rather than broad body changes, making it a targeted upgrade for builders who want more definition in a key mechanical area. Plastic fork bottoms are included alongside mounting material, so the parts work together as a dedicated front fork assembly. The mix of aluminum, brass and molded components creates variation in finish and texture across the completed section. Assembly is required, and the stated assembly time is 600 minutes. On the workbench, the separate tubes, spring and small hardware support careful, step-by-step fitting and finishing. Once installed on the matching 1:12 motorcycle model, the fork assembly gives the front profile a more technical look that suits close-up display and detailed scale presentation.

Model motorcycle kits 1:12

1:12 Front Fork Yamaha YZF-R1M Model Set

€29.99

This 1:12 Front Fork Yamaha YZF-R1M model set adds a more intricate fork assembly to the matching motorcycle build, shifting the front end from standard kit detail to a layout with separate tubes, caps and connectors. Metal and molded parts work together to give the fork area a sharper mechanical presence when the bike is viewed from the front or side. The set is designed for the Yamaha YZF-R1M base kit 300014133 and focuses specifically on the fork structure rather than the full motorcycle. Anodized aluminum immersion tubes and the compensating holder introduce a distinct metallic finish that differs from molded kit surfaces. Dedicated metal parts also depict elements such as the reservoir tank and fork tops, while the smaller pieces break the assembly into more realistic subcomponents. The damper spring is finished in yellow instead of the black used on the standard kit part, bringing the fork closer to the look described for this version. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the separate fork elements support careful fitting, painting and alignment work around one of the most visible areas of the bike. Once installed on the matching 1:12 Yamaha YZF-R1M, the upgraded front assembly gives close-up photography, shelf display and detail-focused builds a more technical fork presentation.

Model motorcycle kits 1:12

1:12 Honda CBR1000RR-R FIREBLADE SP, model kit

€49.99

This 1:12 plastic model assembly kit recreates the Honda CBR1000RR-R FIREBLADE SP 30th Anniversary as a detailed display motorcycle with a compact 176 mm length, 68 mm width and 96 mm height. The finished model stretches to 191 mm long and 97 mm high when placed on the included racing stand, giving the superbike silhouette a lifted paddock look that suits shelf or desk display. The build centers on major motorcycle structures such as the engine, swing arm, front fork and muffler, which attach to the frame with screws. That construction method gives the model a clear mechanical layout while supporting precise placement of the main assemblies. A choice of pillion seat or optional single seat cowl changes the rear profile to match different display preferences. The side cowl, under cowl and fuel tank cover can be removed after completion, opening up views of the inner structure and making the finished motorcycle more interesting to examine from multiple angles. Masking stickers support the paint job on smaller sections and color separations, while paints and cement are required separately. On a workbench, the combination of removable panels, screw-attached main units and detailed exterior surfaces creates a focused motorcycle build with plenty to study during each stage. Once completed, the tricolor graphics, treaded tires and racing stand give the model a strong showroom and pit-lane presence.

Model motorcycle kits 1:12

1:12 Honda CBR110XX Super Blackbird, model kit

€38.49

This 1:12 Honda CBR110XX Super Blackbird model kit recreates the 1996 supersport motorcycle with its long, aerodynamic fairing and tightly packaged mechanical layout. As the body panels, frame and liquid-cooled inline 4-cylinder engine come together, the finished machine takes on the low, fast profile that made the original road bike so distinctive. The kit is designed as a plastic assembly model, with separate sections for the suspension, front fork, exhaust, radiator and rear lighting. Small screws are used to mount the engine and cowling to the frame, which helps show how the major assemblies connect on the full-size motorcycle. Metal-plated parts are used for the dual headlight case, exhaust and front forks, adding a different surface finish from the painted body panels. The build also uses vinyl tubing in multiple cut lengths to represent hoses and lines around the engine and front end, while mesh inserts and decals add cockpit and fairing detail. Assembly takes about 600 minutes. On the bench, the model supports a measured, step-by-step build with visible progress across the chassis, engine and bodywork. Once completed, the motorcycle sits as a detailed display piece that suits a shelf, desk or cabinet with the unmistakable shape of the Super Blackbird.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Honda VFR 750R 1987, plastic model kit

€30.99

This 1:12 plastic model kit recreates the Honda VFR 750R from 1987, a road-legal machine developed from the RVF750 endurance racer and known for its tightly packaged, competition-focused design. The finished motorcycle brings that character into scale with a full fairing, clear windscreen, twin round front headlights, mirrors, white wheels and a large exhaust that define the bike's unmistakable silhouette. The original 748cc liquid-cooled V4 with 16 valves was engineered to stay compact, and that compact layout shapes the model's proportions as well. Structural features from the real machine are part of the subject itself, including the twin-spar aluminum box frame, the single-sided Pro-Arm rear swing arm and the center-lock rear wheel hub. Honda's 1987 machine stood out for its use of advanced materials such as titanium, carbon-fiber, kevlar and magnesium, and the model reflects that high-spec concept through its sharply defined race-bred bodywork and mechanical layout. Assembly is required, and the stated assembly time is 600 minutes. On the bench, the build suits careful trimming, painting and decal work; once completed, the bike sits naturally as a display piece in a motorcycle collection. Radio gear is not part of this kit, and the included contents are the assembly kit itself.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja H2 Carbon, plastic model kit

€52.99

This 1:12 scale plastic model assembly kit captures the Kawasaki Ninja H2 Carbon with the compact, aggressive proportions of the road bike and a finished size of 174 mm long, 76 mm wide and 96 mm high. The combination of aerodynamic bodywork, exposed frame areas and visible mechanical detail gives the model a strong display presence from every angle. The build centers on a realistic inline-4 engine and supercharger, with the cowls, engine and swingarm attached to the frame via screws. The upper cowl follows the H2 road bike specification and is joined by side cowls and rear cowls that shape the machine's distinctive profile. Metal-plated parts are used for the muffler, light cases and other selected details, while clear parts define the headlight and taillight sections. A metal transfer recreates the Kawasaki river mark logo, and masking stickers are included to support clean paint separation on the fuel tank. Assembly kit contents are included. Cement and paints are required separately. On the workbench, the mix of plated finishes, clear lenses and treaded synthetic rubber tires creates varied stages across painting, detailing and final assembly. Once completed, the model suits shelf display, cabinet presentation or a place alongside other 1:12 motorcycle replicas where the supercharged layout and sharp cowl lines stand out clearly.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja H2R, motorcycle model kit

€58.99

This 1:12 scale motorcycle model kit recreates the Kawasaki Ninja H2R with the dramatic form and technical character that made the 2015 machine stand out. As a static display build, it focuses on the H2R's aggressive fairing lines, compact superbike proportions and the visual tension between black surfaces and the green trellis frame. The assembly model draws on key mechanical features of the original bike, including a 998 cc inline-4 with supercharger, and translates them into a detailed miniature with visible structure across the engine area, swingarm and body sections. Upper and side cowls, the engine and the swingarm are screw-attached, which gives the build a defined mechanical sequence as the motorcycle takes shape. Bare carbon fiber styling and mirrored black chrome accents from the original machine inform the finish, while the plated exhaust parts and metal transfers sharpen the final display look. Assembly is required, and the stated assembly time is 600 minutes. Cement and paint are required separately. On a shelf, desk or display case, the finished Kawasaki Ninja H2R sits with the focused presence of a track machine waiting in the paddock. The included racing stand supports that presentation, and the 1:12 scale makes the model easy to place alongside other motorcycle builds while still leaving room for the engine, frame and body details to read clearly.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki Ninja ZX-RR #55 2006, model kit

€56.99

The 1:12 Kawasaki Ninja ZX-RR #55 2006 model kit captures Kawasaki's 2006 MotoGP machine with the sharp fairing lines, compact race stance and mechanical detail that define a modern factory racing motorcycle. Detachable cowlings fixed with precision-made screws let the finished build switch between a clean outer profile and an exposed technical view, so the internal layout remains part of the display rather than hidden once assembly is complete. This assembly kit recreates a 990cc-era race bike that reached the podium in the 2006 season, giving the subject real motorsport context alongside its detailed parts breakdown. The left and right engine areas show off drivetrain and exhaust detail, while the rear suspension uses a realistic nut fastener for a more authentic mechanical look. Synthetic rubber racing slick tires add the low-profile competition finish expected from a MotoGP machine, and Bridgestone sidewall markings sharpen that track-focused appearance. Cartograf decals provide the sponsor graphics, and the markings sheet allows the build to be finished as Shinya Nakano's No.56 or Randy de Puniet's No.17 machine. Across a workbench session, the model offers long-form building with an assembly time of 600 minutes and a result that rewards careful painting and decal placement. On a shelf, in a display case or beside other 1:12 motorcycles, the removable bodywork and race livery give the finished bike two distinct presentation styles.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Street Kit

€56.99

This 1:12 assembly kit captures the Kawasaki ZZR 1400 Ninja/ZX-14 with the long, low proportions and tightly wrapped fairing lines that made the full-size machine stand out in the hyper sport class. Tiny precision screws secure the cowlings, engine and seat rail, so the finished motorcycle shows crisp separation between the major sections when placed on the included display stand. The build also adds version-specific detail through the under diffuser and tandem cowling, allowing the U.S. specification to be reproduced. Metal-transfer markings are supplied for the Kawasaki, ZZR 1400 and ZX-14 logos, and separate metal-transfer details depict the mirror surfaces with a cleaner reflective finish than printed parts alone. Slide markings are prepared for the number plate and instrument panel, giving the cockpit and rear section finer visual definition. Assembly is required, with a stated build time of 600 minutes. Once completed, the model suits shelf display, desk presentation or a place in a motorcycle collection where the aerodynamic nose, stepped seat and road-going silhouette can be viewed from multiple angles. The 1:12 scale also gives enough presence for the markings, body contours and tyre treatment to read clearly without demanding a large display footprint.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Lunch Box EVO, RC model kit, CW-01E

€214.99

The 1:12 Lunch Box EVO brings the tall van shape and wheelie-ready character of a Tamiya classic to the updated CW-01E chassis. With a length of 390 mm, width of 295 mm and height of 220 mm, the model keeps its unmistakable proportions while the revised layout gives it a more settled feel on the move. A tub frame chassis forms the base of the kit, and the EVO revision adds detail that changes how the model behaves on the ground. The front strut brace increases chassis rigidity and also serves as a transponder mount. The body used here matches the version from item 58347, while the longer wheelbase and wider track compared with that earlier release sharpen traction and drivability. A new decal sheet supports the finishing stage with fresh markings for the ABS shell. Running sessions on tarmac, packed dirt or open paved areas make the most of the 2WD layout and the model's lively stance. Radio gear, a battery pack and a charger are required separately. The combination of classic Lunch Box styling, updated geometry and detailed kit construction gives the EVO version a strong presence both on the bench and in motion.  Warning! Not suitable for children under 14 years.

Off-road RC cars

1:12 Lunch Box Re-Release, RC assembly kit

€164.99

The Lunch Box Re-Release brings back a classic Tamiya van with a 1:12 scale body, oversized 115 mm tyres and a lifted monster truck stance that turns every run into a rolling centrepiece. First released in 1987, this RC assembly kit combines the boxy shape of a custom panel van with the tall proportions and visual punch of big-wheel off-road styling. The white ABS body and yellow ABS wheels give the model a strong period look straight from the workbench, while the side panels offer broad surfaces for custom paint and graphics. Drive comes from an included 540 brushed motor, and reverse speed control with low voltage protection is equipped for brushed running. The chassis layout stays true to the original concept with a box type frame, 2WD drive, front swing axle and rear rolling rigid suspension. That combination creates the tall ride height and lively character that made the Lunch Box such a memorable name in RC history. On tarmac, packed dirt or open paved space, the van's high stance and large tyres create an unmistakable presence as it bounces, turns and charges ahead. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX-RR 2020 Front Fork Detail Set

€36.49

This 1:12 front fork detail set for the Suzuki GSX-RR 2020 adds sharper mechanical definition to one of the most visible areas of the motorcycle model. Dedicated components reproduce the fork structure with separate outer tube top, outer tube, outer tube end and inner tube parts, while carbon fiber pattern decals add the surface look used on the race machine. The set also extends beyond the fork itself with photo-etched mesh parts for the radiator, muffler ends and seat cowl ducts. These thin metal inserts are shaped and fitted to match the surrounding parts, giving the radiator guards and outlet covers a finer appearance than molded surfaces alone. Small reservoir tanks and drain bolt details are fitted to the fork bottoms, and the instructions specify left and right placement for these parts. Metal surfaces are paired with anodized-finish outer tubes and reservoir tank parts, while the yellow pre-painted coil spring adds a strong visual accent in the suspension area. Built for use with Item 14139, the set suits modelers who want to refine the GSX-RR 2020 with more visible race-bike detail. During assembly, the fork parts are inserted in sequence, the outer tube end hole is oriented outward, and the surrounding mounting parts are glued around the fork rather than to it, preserving the intended fit of the completed section.

Model motorcycle kits 1:12

1:12 Suzuki GSX1100 Katana, plastic model kit

€28.49

This 1:12 plastic assembly model kit captures the Suzuki GSX1100S Katana Cust.Tuned with the sharp fairing lines, stepped seat profile and tuned street-bike stance that made the original machine stand out at its 1980 Cologne Motor Show debut. The finished motorcycle presents a focused display piece with exposed mechanical areas and a customized finish that gives the Katana its unmistakable period identity. The build is shaped around a detailed motorcycle layout in which the air-cooled 4-cylinder DOHC engine remains a visual centerpiece rather than disappearing behind bodywork. Cooling fins are reproduced with crisp definition, and the lower section gains extra depth through separate engine parts that frame the front mounted oil cooler and the exhaust layout. The tuned specification also extends to the braking hardware, where the front end uses a large diameter rotor with 4-pod calipers while the rear carries small diameter floating calipers. Assembly is required, and the stated assembly time is 600 minutes. On a shelf, desk or display cabinet, the 1:12 scale gives the motorcycle enough presence for the engine, brakes and body contours to read clearly from side and three-quarter views. The subject suits model builders who enjoy classic motorcycle forms, visible mechanical detail and a machine whose customized specification is part of the finished look.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Suzuki GSX1300R Hayabusa, motorcycle model kit

€42.99

This 1:12 motorcycle model kit recreates the Suzuki GSX1300R Hayabusa Street '98 with the long, low silhouette and distinctive front fairing that made the original machine stand out at its debut. At 178 mm long and 71 mm wide, the finished build has a compact display footprint while still leaving room for the body shape, engine layout and road-bike proportions to read clearly. The kit is designed to reproduce the Hayabusa from its unique exterior form down to the engine, with the upper cowling and fuel tank molded as one piece for a clean body contour. The full-size motorcycle's vertically positioned twin-headlight cowling and ram-air-focused shape give the model its unmistakable front view, while the build also brings in details such as the swing arm, front fork and road-going tire setup. Metallic stickers are used on the front fork to sharpen the finish in that area, and the tires are made from real rubber for a more lifelike contrast against the hard kit parts. Assembly is required, with an indicated build time of 600 minutes. On a workbench, in a hobby room or as part of a motorcycle model collection, the Hayabusa shape holds attention from every angle, from the pointed nose to the stretched tail section. The finished model suits display beside other 1:12 motorcycles and gives builders a detailed road-bike subject with recognizable late-1990s Suzuki styling.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Team Suzuki ECSTAR GSX-RR 2020, assembly kit

€55.99

This 1:12 assembly kit recreates the Team Suzuki ECSTAR GSX-RR 2020 as a racing motorcycle model with a finished length of 178 mm. Engine, frame, fairing and exhaust system are all part of the build, giving the machine its layered MotoGP structure and a strong mechanical presence on the workbench. The separate body and chassis sections support a methodical build where the inline racing form takes shape step by step. Slick tires match the circuit specification of the full-size bike and sharpen the finished track look. A racing motorcycle stand is included for display, adding the paddock setting seen around competition machines between sessions. Decals supply the sponsor markings and livery details that turn the assembled model into a faithful 2020 team replica. Assembly is required, with a stated build time of 600 minutes. Paints are required separately. On a shelf, desk or in a display case, the completed motorcycle brings together fairing lines, race graphics and exposed mechanical areas in a format made for close viewing. The kit also suits focused bench sessions where trimming, painting and decal placement are part of the appeal of scale motorcycle building.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 Road Star 1999, motorcycle kit

€43.49

This 1:12 Yamaha XV1600 Road Star 1999 motorcycle kit recreates the long, low proportions of Yamaha's large-capacity cruiser in a format that brings mechanical detail to the workbench and a strong road-bike silhouette to the display shelf. At 208 mm long, 89 mm wide and 100 mm high when completed, the model has enough presence to show off the stretched chassis layout, broad fenders and the visual weight of the V-twin engine. The full-size machine combined traditional cruiser styling with a 1,600 cc air-cooled V-twin pushrod engine, telescopic front forks and a swinging arm monocross rear suspension, and those defining elements shape the character of this replica. Tamiya uses real screws in the assembly, a fitting choice for a motorcycle subject with exposed mechanical structure. Two kinds of metal plated parts support the chrome-rich finish, while the delicate cooling fins, spoke wheels and fine brake and clutch lines add sharper scale definition. The kit also contains 2 tank emblem versions, covering Road Star and the European Wild Star name, along with decals for stripes and meter details. Assembly kit contents are included. Paints, cement and tools are required separately. On the bench, the mix of plated surfaces, decals and fine line details supports a careful finishing process. Once completed, the transparent display stand presents the motorcycle cleanly in a side-on view that suits the cruiser profile and keeps the focus on the engine, wheels and tank graphics.  Warning! Not suitable for children under 14 years.

Model motorcycle kits 1:12

1:12 Yamaha XV1600 RoadStar Custom, model kit

€48.99

This 1:12 scale assembly kit recreates the Yamaha XV1600 RoadStar Custom as a long, low cruiser with the visual weight and custom character of the full-size machine. At 208 mm long, 89 mm wide and 120 mm high, the finished motorcycle carries the stretched stance, tall windshield and touring-style add-ons into a display format with strong shelf presence. The model centers on the air-cooled 1,600 cc V-twin, with delicate cooling fins that give the engine area a finely layered look once assembled. Spoke wheels, slender brake lines and clutch lines add further mechanical detail, while metal-plated parts and clear parts help separate chrome surfaces, lamps and screen elements with convincing contrast. The kit depicts a customized version rather than the standard Road Star, using dedicated parts for details such as the studded seat, tandem pillion pad, back rest and side bags. Assembly time is stated as 600 minutes. Paints and cement are required separately. On the bench, the masking stickers help define painted sections cleanly, and the 2 decal schemes allow the finished motorcycle to be completed in green and black or purple. Once built, the model suits a display shelf, desk or cabinet where the low-slung lines, broad cruiser proportions and custom accessories can be viewed clearly from the side.

Model motorcycle kits 1:12

1:12 Yamaha YZF-R1M, plastic model assembly kit

€49.99

This 1:12 scale plastic model assembly kit recreates the 2018 Yamaha YZF-R1M, a circuit-focused motorcycle shaped by technology influenced by the YZR-M1 MotoGP bike. The compact, refined bodywork and the full fairing layout give the finished build the sharp stance of the 8th generation YZF-R1M, first released in 2015. The model belongs to the long-running 1/12 Motorcycle Series and marks a landmark year for the YZF-R1, its 20th anniversary in 2018. A multi-piece 4-cylinder engine forms the technical centre of the build, with fine depictions extending to the radiator, oil cooler and complex engine covers. Tubing is included to recreate various lines, adding extra depth around the engine area. Separate front cowl parts depict the headlights, position lights and inner cowl with crisp definition. A metal transfer for the Yamaha emblem is planned for inclusion, adding a sharp finishing touch to the completed machine. Screw-fixed construction joins major sections such as the engine, swing arm, front fork and upper cowl to the frame for accurate assembly across key areas. New synthetic rubber tyres depict Bridgestone Battlax RS10s with a realistic tread pattern, while the included display stand supports presentation once the motorcycle is complete. Cement and paints are required separately. Assembly time is stated as 600 minutes, giving the build room to unfold as a detailed bench project and a finished display model.

RC trucks

1:14 40ft Container 3-Axle Semi-Trailer RC kit

€569.99

This 1:14 scale assembly kit recreates a 40-foot container and 3-axle semi-trailer in a striking 917 x 188 x 300 mm format, bringing the look of international road freight into a large display and RC truck setup. The long chassis, tall container profile and tri-axle layout give the finished model the proportions of a full-size logistics trailer seen on European routes. The container uses separate plastic parts to reproduce the top, front and side panels, each with its own panel pattern for a more convincing industrial finish once painted. The semi-trailer is designed to carry both 20 ft. and 40 ft. containers, adding flexibility within a 1:14 truck collection. Twist locks handle the connection between trailer and container with a realistic mechanical action, and the use of die-cast and steel parts at the attachment points supports a firm fit. Metal parts in the container and trailer also contribute extra heft that suits the subject's commercial transport character. Paired with a compatible 1:14 Tractor Truck, sold separately, the model suits realistic yard scenes, road-haul displays and detailed RC transport lineups. The long wheelbase and container format give the completed trailer a strong presence whether parked with landing legs down or coupled for hauling duty.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Arocs 4151 Tipper 8x4, RC assembly kit

€769.99

This 1:14 RC assembly kit brings the Mercedes Benz Arocs 4151 to the workbench as an 8x4 tipper with a long 667 mm chassis, a forward-tilting cab and the purposeful stance of a heavy construction truck. The cab, body parts and vessel are pre-painted in TS-52 Candy Lime Green and TS-29 Semi-Gloss Black with a clear top coat, so the distinctive excavator-tooth grille and protective lamp grilles stand out straight away. Under the cab, an aluminum ladder frame carries proven Tamiya truck technology in a layout shaped for heavy-duty road and site driving. The 2 rear axles are powered, while the 2 front axles are steered separately and use different steering angles to match the behavior of the original truck. Green exterior parts and black interior parts define the finish, and the completed model weighs about 4 kg, adding substance to the build. The tipping body is designed for use with the optional ACU-01 spindle drive unit, and an optional multifunction unit can simulate light and sound functions from the full-size vehicle. On the bench, the model offers a detailed truck build with visible frame structure, drivetrain layout and body mounting points. Once equipped for radio control, it suits slow, deliberate maneuvering, trailer work with an added tow bar, and realistic tipping scenes that echo construction-site operation. Radio gear, a battery pack, a charger, servos, a speed controller and the ACU-01 unit are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:14 Buggyra Fat Fox, RC model kit, TT-01E

€179.99

The Buggyra Fat Fox brings European truck racing into a 1:14 RC model kit with a full racing-truck silhouette, detailed sponsor livery and the broad, purposeful proportions of the 2018 circuit machine driven by Adam Lacko. At 420 mm long, 187 mm wide and 188 mm high, the finished model has the visual presence of a race truck while staying sized for on-road RC running. Its body is formed from 3 clear polycarbonate sections, with separate rear fender and coupler parts that help capture the layered structure of the full-size truck. ABS side mirrors and a rear bumper attached to the chassis add extra exterior detail, while the included stickers recreate the #1 2018 season markings. The TT-01E platform uses a shaft-driven layout and comes with an electronic speed controller plus a Torque-Tuned motor. Wheelbase is 257 mm. Numerous option parts are available for tuning the chassis setup over time. This assembly kit suits builders who enjoy painting, detailing and setting up a race-inspired RC truck for smooth tarmac driving. Radio gear, a battery pack, a charger and paints are required separately.

RC trucks

1:14 FH16 Timber Truck, RC assembly kit, 3-speed

€679.99

The 1:14 FH16 Timber Truck is an RC assembly kit built around the long-bed timber hauler layout, with a detailed ABS cab, upright stakes and a full-size truck stance across 733 mm length, 194 mm width and 306 mm height. The Volvo FH16 Globetrotter form is recreated with a photo-etched grille, interior cab details and a rear section shaped for log transport styling. Its chassis follows a ladder-frame construction with aluminum side channels and resin cross members, while a front-mounted motor sends drive through a metal propeller shaft to the rear axles. Each rear axle uses its own metal differential, and the suspension combines metal leaf springs with friction dampers for a mechanical layout that closely reflects the full-scale vehicle. The rear bed uses reinforced resin and metal parts for the stakes and tailgate, and new rear tyres with off-road tread add a more purposeful forestry-truck look. The cab is screwed in place and removable, and space behind the seats allows installation of the separately available MFC-03 multifunction unit. On the bench, the model offers a build centered on truck engineering details rather than a simplified shell-over-chassis format. Once assembled, the 3-speed transmission brings a more involved driving rhythm, especially on longer runs where shifting changes the truck's pace and character. A 4-channel radio system, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Ford Aeromax, RC truck kit, 3-speed gearbox

€454.99

The 1:14 Ford Aeromax RC truck kit brings long-haul tractor styling into a large-format build with a 614 mm length, a 190 mm width and a stretched 447 mm wheelbase that gives the model the presence of an American highway rig. A servo-shifted 3-speed transmission mounted at the front of the aluminum ladder frame adds a mechanical driving function that goes beyond simple forward motion, with 32.49:1, 17.76:1 and 10.66:1 gear ratios to change how the truck responds on the move. The chassis layout uses tandem rear axles and a fifth-wheel coupling plate, matching the structure of a real tractor unit rather than a generic road vehicle. At 2900 g, the model has the mass to suit measured, realistic running, and the chrome wheels with radial tires reinforce the full-size truck character. Front and rear tread measurements of 156 mm and 138 mm, plus 22 mm tire width at both ends, define the stance and track width with concrete scale detail. The kit includes a 540 electric motor. Radio gear, a battery pack and a charger are required separately. On a paved course or in a truck model setting, the long wheelbase, sleeper-cab body and exposed rear chassis create the look of a working road tractor preparing to couple to a trailer. The build suits hobby sessions focused on mechanical detail, and the finished truck rewards careful driving with visible gear changes and authentic big-rig proportions.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Grand Hauler, RC assembly kit, 3-speed truck

€479.99

The 1:14 Grand Hauler brings long-nose American tractor truck style into a large R/C assembly kit with a stretched 692 x 190 x 300 mm format, custom-inspired bodywork and a detailed heavy-duty chassis. Newly designed front and rear bumpers, a fresh grille, air cleaners and metal-tube muffler covers give the truck the longer, show-truck proportions described in the series concept. Under the body, the ladder frame uses aluminum side channels and resin cross members to mirror full-size truck construction in scale form. A front-mounted motor sends power to the twin rear axles through a realistic drivetrain layout, and the 3-speed transmission can be operated through a 4-channel R/C transmitter for more involved control than a single-speed setup. Metal leaf spring dampers with built-in coil springs add another mechanical layer to the suspension design. The kit also contains a newly designed 1:14 driver figure, adding a fitted cab detail that suits the truck's display presence between running sessions. Radio gear, a battery pack, a charger and paints are required separately. The included coupler opens the way to pairing the tractor unit with currently available Tamiya 1:14 scale trailers, turning the finished truck into a working road-haul combination. On the bench, the mix of metal parts, metal-plated resin parts and truck-specific detailing creates a build centered on chassis structure, drivetrain layout and customized exterior character.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Grand Hauler, RC assembly kit, 6x4

€499.99

The 1:14 Grand Hauler assembly kit brings a classic American-style tractor unit into a large RC format with a long, extended body, matte black finish and a detailed 3-axle layout. At 692 mm long, 190 mm wide and 300 mm high, the model has the road presence to make the sleeper cab, fifth-wheel area and bright plated details stand out on the bench or in motion. Suspension uses leaf springs with friction dampers, matching the heavy-truck character with a mechanical layout that suits the scale. A driver figure is included for a more complete cab interior view through the windows. The trailer hitch plate is prepared for TAMIYA and CARSON semi-trailers, opening the way to articulated truck combinations within the same 1:14 format. The body, H, P and Q12/Q15 parts are moulded in black, and the metal exhaust pipes add a distinct material contrast against the painted surfaces. The model suits hobby sessions focused on building, detailing and controlled driving, whether running as a solo tractor or coupled to a compatible semi-trailer. Multi-channel radio gear is required for the shifting function. A multifunction unit for speed control, lights and sound effects is recommended separately in MFC-01 American sound or MFC-03 European sound versions.

RC trucks

1:14 King Hauler, RC truck kit, 3-speed gearbox

€484.99

The 1:14 King Hauler captures the look of a classic American conventional tractor truck in a large RC truck kit with a long hood, sleeper cab proportions and a substantial 630 mm overall length. Chrome-look exterior parts, dual rear axles and the stretched 447 mm wheelbase give the model the stance of a full-size highway hauler as it rolls across asphalt, concrete or a workshop floor. At the center of the build is a metal C-channel ladder frame that carries the drivetrain and suspension in a layout drawn from real truck construction. The 540 motor sends power through a 3-speed gearbox, and the stepped ratios of 32.49:1, 17.76:1 and 10.66:1 create distinctly different running characteristics. Front and rear tread measurements of 156 mm and 138 mm shape the truck's planted footprint, while 22 mm tyre width and 83 mm tyre diameter keep the proportions true to the scale format. Each axle is supported by leaf springs and shocks, adding mechanical realism to the chassis structure as well as movement detail during operation. The King Hauler suits careful bench assembly, display between running sessions and road-style RC driving with or without an optional trailer. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Knight Hauler, RC truck kit, 3-speed gearbox

€484.99

The 1:14 Knight Hauler RC truck kit brings American highway style into a large-scale build with a 440 mm length, a 188 mm width and a dark tractor-truck body defined by twin exhaust stacks, a tall sleeper cab and chrome exterior parts. At this size, the model carries strong road presence on the bench and on the ground, while the 1:14 format leaves room for visible mechanical detail across the frame, driveline and cab parts. Under the body, the aluminum ladder chassis uses a 272 mm wheelbase and a tandem rear axle layout that match the long-haul truck format. Front tread measures 156 mm and rear tread 138 mm, shaping the narrow-front, dual-drive stance associated with full-size road tractors. The drivetrain centers on a 3-speed gearbox with selectable 10.6:1, 17.7:1 and 32.4:1 ratios, adding a shifting function that changes how the truck delivers power. Weight is listed at 2300 g, giving the assembled model substantial mass for a grounded feel during running and coupling work. A fifth-wheel plate sits behind the cab to accept compatible semi-trailers in realistic tractor-trailer configuration. On a workshop table, the long frame rails, gearbox parts, propeller shafts and suspension hardware create a build with clear mechanical structure rather than a simple shell-over-chassis layout. Once assembled, the Knight Hauler suits slow-scale driving, trailer hookup sessions and display alongside transport-themed trailers and cargo scenes. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 M-B Arocs 4151 Tipper 8x4, RC assembly kit

€769.99

This 1:14 R/C assembly kit captures the M-B Arocs 4151 Tipper 8x4 as a large-scale construction truck with a commanding 667 mm length, 196 mm width and 268 mm height. The injection molded body shapes the cab with crisp commercial-truck character, while separate parts for the mirrors and visor add extra depth when the model is viewed from the front corners or along the roofline. Under the body, the 4-axle chassis uses a ladder frame with aluminum side channels and resin cross members. Metal leaf spring dampers with built-in coil springs support the suspension, and the battery case sits above the second axle so access stays easier even when the bed is loaded. The truck bed uses a metal subframe, giving the rear section the right mechanical feel for a working tipper layout. For operation, radio gear, a battery pack, a charger and paints are required separately. The roof visor also features light pod depictions that can be fitted with LEDs for a more detailed finish. On the move, the twin rear axles take drive from the included TR mighty-tuned 35T motor, while the front-mounted steering layout guides both front axles through turns. The truck bed is fixed in the kit; the separately sold Actuator Set 56545 is required for bed movement. Separately sold MFC-03 56523 or MFC-01 56511 units can also be used for lights and sounds in display or driving sessions.

On-road RC cars (2WD/4WD)

1:14 M-B Race Truck Actros MP4, RC assembly kit

€179.99

The 1:14 M-B Race Truck Actros MP4 RC assembly kit brings European truck racing onto the workbench with the shape of the 2019 ETRC machine and the proven TT-01 Type-E platform underneath. Its 441 mm length, 188 mm width and 257 mm wheelbase give the finished truck the long, planted proportions that make a race hauler stand out on smooth on-road runs. The shaft-driven 4WD layout of the TT-01 Type-E chassis gives this model its drive system and easy handling character, while the racing truck body introduces a very different silhouette from a standard touring car. The polycarbonate shell is built as a new 3-part body, separating cab, body and coupler sections for a more defined scale appearance. Height is 194 mm, adding the tall cab profile that makes the Actros MP4 instantly recognizable in motion and at rest. Parts for installing headlight and taillight LEDs are included, with LEDs and light unit required separately. A battery pack, a charger and paints are required separately. On a clean indoor track or a smooth paved surface, the silver molded wheels and truck-specific radial tires suit steady laps and detailed body presentation alike. The sponsor markings, grille emblem and mirror parts give the finished build a race-day look that carries through whether the truck is being assembled, painted or lined up for display between runs.

RC trucks

1:14 MAN TGX 26.540 6x4 RC assembly kit

€519.99

This 1:14 RC assembly kit recreates the MAN TGX 26.540 6x4 XLX as a detailed tractor truck with a strong road presence and a finished cab in Light Metallic Blue. At 526 mm long, 193 mm wide and 301 mm high, the model has the size and stance to make the ladder frame, roofline and fifth-wheel area read clearly during building and driving. The chassis uses aluminum channels and a front-mounted Type 540 motor that drives the rear wheels through a sealed gearcase and propeller shaft joint. Gear ratios of 1:32.49 in low, 1:17.66 in 2nd and 1:10.66 in top gear give each shift a distinct change in running character. Both rear axles are equipped with differentials, and the coupler unit allows connection to a separately available semi-trailer. Large curved mirrors with twin reflective surfaces, MAN EURO 5 plated details and TGX 26.540 door markings add model-specific finish points across the cab. During bench assembly, the painted body sections and metal detail parts create a build with less finishing work on the main cab surfaces. On the floor or on a display shelf, the long wheelbase, dual rear axles and tractor-truck proportions give the model the look of a working highway hauler. Radio gear, a battery pack, a charger and paints are required separately.

RC trucks

1:14 MB Actros 3363 GigaSpace, RC assembly kit

€529.99

The 1:14 MB Actros 3363 GigaSpace RC assembly kit brings the look of a modern 3-axle tractor unit into a large-format scale build with a detailed cab, replica interior and auxiliary equipment such as air tanks. Newly molded body parts distinguish this 3363 version from the 1851 specification model, while ABS body components, metal-plated parts and emblem transfers give the finished truck a crisp, full-size appearance on the shelf and in motion. Its chassis follows Tamiya's proven tractor truck layout with a tough ladder frame, aluminum side channels and resin cross members. The model measures 538 mm in length, 195 mm in width and 305 mm in height, giving the build substantial road presence. Metal leaf spring dampers with built-in coil springs support the suspension, and the drivetrain layout places the motor at the front before sending power by propeller shaft to the rear drive axles. Radio gear, a battery pack, a charger and paints are required separately. The included coupler opens the way to articulated truck setups with currently available Tamiya 1:14 scale trailers, turning the tractor unit into a working centerpiece for depot scenes, display runs and controlled driving sessions. Compatible tractor truck option parts and the separately available MFC-03 or MFC-01 unit can add LED lighting and sound functions for an even more detailed road-going presentation.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 MB Arocs 3348 Tipper, RC assembly kit

€684.99

The MB Arocs 3348 tipper brings the presence of a modern 3-axle construction truck into a 1:14 scale RC assembly kit with a red and silver finish already applied to key body sections. At 576 mm long, 190 mm wide and 267 mm high, the model has the broad stance and tall cab proportions that make the full-size vehicle so distinctive on a worksite layout or display shelf. The body is recreated with an injection-molded cab and separate details such as the side mirrors and visor, while the front end carries the bucket tooth grille that defines the Arocs look. Cab, H, K and M parts are molded in red PS, and the rear bed with CC parts is molded in gray ABS. A urethane top coat sits over the TS-8 Italian red and TS-17 Gloss aluminum paint, giving the finished surfaces a consistent sheen across the build. The truck bed combines a metal subframe with resin panel sections, and the rear section uses dedicated tipper-truck rear tires, rear fenders and taillights. Metal leaf spring dampers with built-in coil springs support the suspension during running and when the bed is loaded for hauling scenes. The model is compatible with the Electric Actuator Set for powered bed motion, and with MFC-03 or MFC-01 units for added light and sound functions. Radio gear, a battery pack, a charger and paints are required separately.

RC trucks

1:14 MB Arocs 3363, RC assembly kit, 6x4

€464.99

This 1:14 RC assembly kit recreates the MB Arocs 3363 ClassicSpace as a 3-axle tractor truck with a narrow cab, a detailed commercial-vehicle stance and a substantial 529 x 190 x 267 mm footprint. Newly molded body parts capture the shape of the cab, while the bucket-tooth grille and photo-etched rear platform sharpen the truck's industrial look on the bench and on the move. The chassis combines aluminum side channels with resin cross members in a ladder-frame layout, and the front-mounted 540 motor drives the twin rear axles through a realistic drivetrain arrangement. Built-in differential gears support smoother cornering, and the suspension uses metal leaf spring dampers with friction dampers to mirror full-size truck construction. Interior details such as the seat and dashboard add depth behind the glazing, while auxiliary equipment and metal-plated parts reinforce the scale finish. The included coupler allows the tractor unit to connect with currently available 1:14 scale Tamiya trailers, opening up heavy-haul scenes, depot movements and articulated road-truck setups. Radio gear, a battery pack, a charger and paints are required separately. A Multi-Function Control Unit can also be used for LED lights and sound effects.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Mercedes-Benz Actros 1851 GigaSpace RC kit

€464.99

The 1:14 Mercedes-Benz Actros 1851 GigaSpace RC assembly kit brings long-haul truck presence into a detailed build with a 458 mm length, 195 mm width and 305 mm height. Its high-roof cab, side skirts and aerodynamic package capture the shape of the modern tractor unit, while the authentic interior and tilting driver's cab add depth once the exterior comes together. Under the body, the chassis follows a classic aluminum ladder frame layout with plastic reinforcements and a rear-wheel drive 4x2 configuration. A Type 540 electric motor feeds a 3-speed transmission, and the rear axle uses metal bevel gears to transfer power through an aluminum driveshaft. The front axle is aluminum, the rear axle is reinforced resin, and the differential uses metal bevel gears to keep the truck composed through turns. Wide front wheels and tires, chrome horns, blind spot mirrors and windshield wipers extend the scale look with truck-specific detail. LEDs can be fitted separately to recreate front, rear, side and roof lighting. The coupler plate allows the tractor to connect with a semi-trailer, shifting the focus from a standalone cab to articulated road-truck operation. On a shelf, the model shows the full GigaSpace silhouette and detailed cab furniture; on the move, the gearbox, suspension and trailer-ready chassis create a build that rewards careful setup and steady driving. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Pole-Trailer, RC kit, with 5 tubes

€284.99

This 1:14 Pole-Trailer RC kit brings long-load transport into a scale truck setup with a collapsible pole and 5 included tubes. The layout is built to carry pipes of different lengths, creating the stretched proportions and working trailer geometry seen on full-size pole trailers. The trailer measures 709 mm in length and 186 mm in width, giving the chassis a long, narrow footprint that suits pipe transport. Weight is 2550 g, which adds substance to the finished build and supports a planted presence behind a compatible tractor unit. Each of the 5 tubes measures 75 cm in length with a 55 mm diameter, so the load has real visual mass rather than acting as a token accessory. The aluminum chassis adds a distinct material note to the structure, while 4 highly detailed wheels complete the tandem-axle trailer appearance. Placed behind a 1:14 truck tractor, the Pole-Trailer creates a convincing heavy-haul scene for yard displays, workshop shelves, or driving sessions focused on commercial transport themes. The long tube load, narrow frame, and extended support concept give the model a clear role within a scale fleet built around cargo movement and industrial road transport.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Scania 770 S 8x4/4, RC assembly kit

€849.99

The 1:14 Scania 770 S 8x4/4 RC assembly kit brings heavyweight road-truck presence into a large-scale build with a 610 mm length, 196 mm width and 320 mm height. Its unpainted body captures the shape of the Scania 770 S with an injection-molded cab and detailed rear equipment such as the auxiliary machinery tower, fuel tank and air tank for a convincing heavy-haul look. Numerous metal parts are used throughout the chassis, and the suspension uses metal leaf springs to reflect the structure of the full-size vehicle. The 3-speed transmission is built into the model and uses gear ratios of 1:32.49, 1:17.66 and 1:10.66. A coupler unit is fitted for connection to a separately available semi-trailer. Interior parts including a modern-style dashboard and seats are included, and a 1:14 scale driver figure adds another layer of cab detail. Stickers and metal transfers are supplied for body decoration. On the bench, the large dimensions and detailed mechanical layout give the build a strong workshop presence. Once assembled, the model suits realistic truck scenes with a separately available semi-trailer attached, or display settings that show off the cab interior, multi-axle chassis and decorated body. Radio gear, a battery pack, a charger and paints are required separately.

RC trucks

1:14 Scania R620 6x4 Highline, RC kit

€494.99

The 1:14 Scania R620 6x4 Highline RC kit brings the presence of a modern road tractor into a large-format build, with a 520 mm body length, a high-roof cab and a painted blue finish that stands out on the bench and on the driving surface. This special edition uses pre-painted body components in TS-51 Racing Blue, finished with a urethane clear topcoat for an even, glossy exterior across the cab panels. Under the body, the ladder type frame gives the chassis the long, straight structure associated with full-size commercial trucks, while the 237+103 mm wheelbase sets the spacing for the 3-axle layout. The front and rear tread measure 156 mm and 138 mm, and the tyres use a 22 mm width with an 83 mm diameter at both ends, creating consistent rolling proportions across the truck. Drive comes from an Electric 540 motor paired with a 3-speed gearbox that uses 32.49:1, 17.76:1 and 10.66:1 ratios, so the running character can change between slower manoeuvres and more flowing sections. At 293 mm high and 187 mm wide, the cab and chassis fill out a display shelf with the same long-wheelbase stance they bring to indoor driving sessions. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

On-road RC cars (2WD/4WD)

1:14 Team Hahn MAN TGS, RC kit, TT-01E 4WD

€179.99

The 1:14 Team Hahn MAN TGS brings European truck racing into RC form with a detailed cab, racing livery and the TT-01E chassis underneath. Its 3-piece polycarbonate body recreates the broad front, roofline and side sections of the full-size race truck, giving the finished build a strong track presence even before the first run. The subject is based on the Team Hahn Racing MAN TGS, the truck driven by Joachim Hahn to 3rd place in the 2015 European Truck Racing Championship. Crash protection is attached to the bottom of the chassis, adding a dedicated lower guard where the model meets the track surface. The kit also uses special truck rims and profiled truck tires to match the proportions of a racing truck rather than a touring car. Numerous tuning parts are available for the platform, opening the door to later setup changes around the same chassis layout. On the bench, the illustrated assembly manual guides the build of the chassis and body shell, while the painted and decaled cab develops its full race-truck character step by step. On the track, the long, tall truck silhouette and 4WD layout create a very different visual rhythm from a standard RC car, with the MAN TGS shape leaning into every braking zone and corner entry. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Truck Accessory Set, cones and tools

€13.29

This 1:14 Truck Accessory Set brings workshop and roadside detail to Tamiya R/C Truck Series models with cones, tools and service equipment sized to match the truck format. The set contains 1 shovel, 1 fire extinguisher, 1 deck brush, 4 cones and stickers, creating a more convincing scene around a parked tractor unit, trailer or maintenance stop. The accessory parts are supplied on a sprue and are assembled into separate scale pieces for placement on the model or around it. The broom and shovel use a dedicated bracket, which can be fixed to the truck body with synthetic rubber cement or the included double-sided tape. The fire extinguisher is built from separate parts and finished with its own label sticker, while the cones sit on square bases and take striped markings around the cone body. This set is also the same accessory group included in 56365 and 56366. Placed beside a cab, trailer or loading area, the 4 cones define a work zone and give the truck a stronger sense of purpose. Mounted tools and the extinguisher add the kind of service details often seen on full-size commercial vehicles, making static display setups and photographed scenes look more complete.

RC trucks

1:14 US Fuel Tank Trailer 2Axle, RC assembly kit

€454.99

The 1:14 US Fuel Tank Trailer 2Axle brings a long-haul tanker silhouette to Tamiya truck layouts with a stainless steel tank, an aluminum ladder frame chassis and a newly designed Gallant Eagle livery. At 814 mm long, 186 mm wide and 280 mm high, the trailer creates a commanding road scene whether parked at a loading point or rolling behind a tractor unit. Its construction is based on the chassis and tank parts from Item 56303, giving the build a proven foundation while the updated graphics shift the look toward an imagined US fuel hauler. The 2-axle, 8-wheel arrangement shapes the trailer's proportions and supports the visual weight of the cylindrical tank. Metal-plated parts on the ladder, fenders and wheels catch the light against the polished tank surface, while the decal sheet adds the Gallant Eagle markings and finishing details. Detailed illustrated assembly instructions are included in the kit. The tanker may be coupled with 1:14 scale R/C tractor truck models for highway-style convoy scenes, depot setups or display runs with a full articulated combination. Optional Motorized Support Legs 56505 add powered attachment and detachment action, giving parked and coupling sequences an extra layer of scale realism during operation.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH12 Globetrotter 420, RC truck kit

€389.99

The Volvo FH12 Globetrotter 420 arrives here as a 1:14 R/C model assembly kit with the tall long-haul cab shape captured in full scale-model form. At 440 mm long, 188 mm wide and 295 mm high, the truck has the stance of a European tractor unit, with the high-roof Globetrotter profile giving the build a clear visual identity on the bench and in motion. Its 272 mm wheelbase sets the proportions for a chassis built around a ladder frame with aluminum side channels, a layout that reflects the structure of a working truck. The front-mounted motor sends power to the rear axle, and the mechanical arrangement gives the underside real substance during assembly as the drivetrain takes shape. A 3-speed transmission brings another layer of control once the model is running, with gear changes handled through a 4-channel R/C setup. The included coupler opens the truck to trailer operation and allows connection with currently available 1:14 Tamiya trailers. Radio gear, a battery pack and a charger are required separately. During a slow pass across smooth ground, the metal leaf springs and friction dampers make the suspension detail easy to appreciate, especially when the chassis settles under direction changes. The finished truck suits display just as naturally, where the FH12 cab lines, wheelbase and tractor layout give the model the look of a classic long-distance hauler.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 Tow Truck 8x4, RC assembly kit

€1,094.99

The 1:14 Volvo FH16 Tow Truck 8x4 brings heavy recovery hardware into Tamiya's R/C truck range with a long 750 mm chassis, a 195 mm width and a 300 mm height that give the model a commanding road presence. Its detailed cab captures the FH16 shape with molded resin parts, interior features and a photo-etched grille, while the 8x4 layout and recovery body create the look of a full-size heavy tow vehicle built for disabled tractor trucks. Under the body, the ladder frame combines aluminum side channels with resin cross members, and the front-mounted motor drives the 2 rear axles through a propeller shaft. Metal leaf springs, friction dampers, a float-mounted die-cast front axle and reinforced resin rear axles shape the running character, while differential gears in each rear axle help the truck track smoothly through bends. The rear towing section is designed around boom and underlift mechanisms, and it can be operated by radio control when the separately sold Actuator Set 56553 is installed. Headlights and taillights can also be illuminated with separately sold LEDs, and the chassis is compatible with the separately sold MFC-03 multi-function control unit. As an assembly kit, this model suits bench sessions focused on scale detail as much as driving time on the floor or a paved layout. The long wheelbase, multi-axle stance and working transmission give the truck a distinct presence in convoy driving, display scenes and recovery-themed setups. Radio gear, a battery pack, a charger and LEDs are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 Tow Truck, RC model kit, 8x4

€1,199.99

The 1:14 Volvo FH16 Tow Truck model kit brings a heavy recovery truck format to the workbench with an 8x4 chassis, 4 axles and a steerable double front axle. At 750 mm long, 195 mm wide and 300 mm high, the finished truck has the long, purposeful stance of a full-size tow vehicle, with silver pre-painted cab parts that give the bodywork a clean, uniform finish early in the build. The construction combines an ABS body with an aluminium ladder frame and detailed running gear. Power comes from a front-mounted 540 electric motor and reaches the 2 rear drive axles through a metal cardan shaft, while 2 differentials support smoother cornering. Detailed metal leaf springs and friction dampers shape the suspension layout, and the 3-speed manual transmission can be controlled through suitable radio equipment. The rear crane structure is built with many metal parts, and turnbuckles with chains are supplied for load securing detail. Radio gear, a battery pack, a charger and a servo are required separately. An optional ACU unit is required separately for crane movement. Photo-etched radiator grille parts, chrome rims and the visible cab interior add scale character across display and running sessions. The permanently bolted driver's cab leaves space behind the seats for installation of a multifunction unit, keeping the interior visible while supporting an expanded electronics layout. The tow truck can pick up and tow 1:14 scale model trucks, opening up recovery scenes, depot setups and convoy support runs.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16 XL 750 4x2, RC assembly kit

€484.99

This 1:14 RC assembly kit recreates the Volvo FH16 Globetrotter XL 750 4x2 Tractor as a large-scale road truck with a commanding cab shape and full-bodied presence. At 462 mm long, 193 mm wide and 309 mm high, the model brings the FH series flagship proportions onto the bench and onto the road, with the Globetrotter XL roof profile giving the silhouette its unmistakable long-haul look. The cab uses precise injection-molded parts, and the front grille is rendered with photo-etched detail for a sharper finish at the nose. Interior parts such as the dashboard and seats are included, and a 1:14 scale driver figure adds another layer of realism inside the cab. Customized sections for the exterior are also supplied, including the roof bar, low bar and side bars, so the build can lean into the high-spec tractor-truck style shown by the full-size vehicle. The model is also compatible with Tractor Truck Option Parts for further tuning. On the move, the rear-axle-drive 4x2 layout and front-mounted drivetrain echo the construction of the actual truck. The assembly can be paired with the separately available Multi-Function Control Unit MFC-03 for light, sound and vibration functions. Radio gear, a battery pack, a charger, 2 servos and the Multi-Function Control Unit are required separately.  Warning! Not suitable for children under 14 years.

RC trucks

1:14 Volvo FH16XL Set, RC truck kit

€1,029.99

This 1:14 Volvo FH16XL set brings RC truck building into a large-format scale model with a clearly named FH16XL cab and the MFC03/KO MC-8 version listed in the supplied data. The scale gives the truck presence on the bench and on the floor, while the kit format turns the model into a focused assembly project rather than a ready-made vehicle. The supplied designation points to a specific set configuration, which helps separate this release from other RC truck variants in the range. Assembly time is stated in minutes in the source data, but no exact figure is provided, so the build is best understood as a staged project built around the included set identity rather than a quick setup. Batteries are not included. Radio gear, a battery pack and a charger are required separately. The source data also identifies this as a powered vehicle within the radio or remote control ground category, placing it firmly in the RC truck field. On a workbench, the 1:14 scale and FH16XL naming support a model that suits careful assembly, finishing and setup. Once completed with the separately required running equipment, the truck fits controlled indoor driving sessions, shelf display between runs, and collection alongside other scale transport models.  Warning! Not suitable for children under 14 years.

RC tanks

1:16 Brit. Centurion Mk.III, RC tank assembly kit

€1,094.99

This 1:16 RC assembly kit recreates the Brit. Centurion Mk.III as a large-format tracked model with a commanding 603 mm length, 214 mm width and 187 mm height. Cast surface textures, weld lines and the long-barrel silhouette give the tank a convincing full-size presence whether it is crossing the floor under power or standing still between runs. Twin Type 380 motors drive the running gear, while a Type 130 motor handles turret movement and 2 TSU-03 servos operate gun elevation and recoil. The control system goes beyond simple driving: the turret rotates, the barrel lifts and lowers, and firing actions are paired with light, sound and recoil effects. Engine sound follows the driving speed, so slow movement, acceleration and stationary moments each feel distinct. The gun barrel and chassis use aluminum, and die-cast suspension arms plus drive sprockets add weight and definition to the running gear. Movable Horstmann suspension helps the tank settle and move with the character of a tracked vehicle, and the pre-assembled tracks reduce setup work in this large-scale build. A magnet-fixed hatch gives direct access for battery replacement during running sessions. Item 53447 Battle System for 1:16 scale tanks is compatible for added battle mode play. Radio gear, a battery pack, a charger and paints are required separately.  Warning! Not suitable for children under 14 years.

Military figures 1:16

1:16 General Rommel Figure Assembly Kit

€19.49

This 1:16 scale assembly kit recreates General Rommel in the North Africa uniform, turning a formal historical subject into a focused figure build with crisp uniform lines, separate insignia details and a strong display presence. The finished figure can stand in a composed command pose on a shelf, in a vignette or as part of a larger military scene. The tunic collar, shoulder badges and decorations are molded as separate parts, which gives these areas more depth than a single-piece sculpt and helps painted details read clearly. Clear parts are used for the goggles, capturing the distinctive look of the lenses instead of treating them as a solid piece. The kit allows 2 pose options: hands clasped behind the back or hands positioned to hold binoculars in front. Paint references for both poses are interchangeable, which supports different finishing choices while keeping the same figure base. Assembly takes 600 minutes. In a display cabinet, the white or field-grey uniform treatment, tall boots and peaked cap create a disciplined silhouette that stands out beside vehicles, crews or terrain sections in the same scale. On a workbench, the separate medals, collar parts and binocular placement reward careful painting and alignment. Paints and cement are required separately.  Warning! Not suitable for children under 14 years.

RC tanks

1:16 Panzer Königstiger, RC tank kit

€779.99

The 1:16 Panzer Königstiger Full Option brings the presence of a late-war German heavy tank into an RC assembly kit with powered driving, turret movement and coordinated battle effects. Forward and backward travel, left and right steering, pivot turning and gun control combine with recorded sound, light and recoil functions to create a model that feels active the moment the tracks begin to move. A front-mounted gearbox houses 2 Type 380 motors, allowing the tracks to run together or in opposite directions for spot turns. The MF-01 multifunction unit handles sound and light effects, while the T-03 DMD control unit manages speed control. Engine audio was recorded from a real Maybach HL230-P30 engine, capturing idling, acceleration and metallic track noise. The model also reproduces 2 engine starting procedures: crank starting when the transmitter is switched on first, and electric motor starting when the receiver is switched on first. Zimmerit coating is represented with a relief printed seal for the late-war finish. Metal torsion bars, suspension arms and wide tracks help the chassis settle over bumps and dips during running sessions on indoor floors or prepared terrain. The rotating turret, elevating and depressing 88 mm gun, muzzle flash and recoil unit give each halt, aim and firing sequence a more mechanical, scale-focused rhythm. Radio gear, a battery pack and a charger are required separately.  Warning! Not suitable for children under 14 years.

Military model vehicles 1:16

1:16 US M551 Sheridan, display model kit

€499.99

The 1:16 US M551 Sheridan display model kit captures one of the most distinctive light tanks of the post-war era in a large format that gives its shape and surface detail real presence on the bench or in a cabinet. At 408 mm long, 177 mm wide and 186 mm high including the gun shield, the finished model has the footprint to show off the Sheridan's compact hull, rotating turret layout and prominent 152 mm gun launcher with convincing scale impact. This static assembly kit draws on components from the R/C version for a highly detailed result. A precision aluminum gun barrel brings a clean, straight focal line to the turret, while metal lower hull parts, drive sprockets and coil-sprung suspension arms add mechanical definition where the eye naturally lingers. Pre-assembled plastic tracks save repetitive track-link work and still preserve fine detail, with soft resin pad sections adding another layer of realism to the running gear. Soft photo-etched parts are also included for the anti-RPG net often fitted to Sheridans in Vietnam, giving the build a specific in-service character rather than a generic museum look. The subject suits careful painting, weathering and marking work, especially across the broad hull panels, turret surfaces and external fittings visible on a model of this size. Cement and paints are required separately. Once completed, the Sheridan reads equally well as a military display centerpiece, a historically grounded build for armor collections, or a detailed project focused on metal parts and finish quality.

Model car kits 1:20

1:20 Honda RA272, plastic model kit

€40.99

The 1:20 Honda RA272 plastic model kit brings a landmark Formula racing car to the workbench in a compact scale that still leaves room for the defining details. The finished model recreates the slim single-seater shape with its open cockpit, exposed wheel layout and the clean, purposeful lines of a mid-1960s Grand Prix machine. The bodywork is paired with visible suspension elements, side mirrors, rear exhaust pipes and the distinctive nose treatment shown on the race car, giving the build a strong period presence once painted and assembled. Car number 11 and Honda markings complete the livery and help place the model firmly in its historic racing setting. Assembly is required, and the stated build time of 600 minutes points to a project with enough stages for careful preparation, finishing and decal work rather than a quick snap-together session. On a desk, shelf or in a display cabinet, the low stance and open-wheel format stand out clearly beside closed-body road and touring cars. The model also suits focused hobby sessions where trimming parts, refining painted surfaces and applying the final race markings are part of the appeal of a classic scale build.

Model car kits 1:20

1:20 Lotus Type 79 1978, plastic model kit

€67.99

The 1:20 Lotus Type 79 1978 plastic model kit captures one of Formula 1's most recognisable shapes in a format that rewards close inspection on the workbench and on display. Its removable front and rear upper cowls let the finished car switch between a clean race-day silhouette and an open view of the internal structure, with the cockpit and engine area left visible for a more technical presentation. The build centres on a precisely reproduced monocoque chassis, with suspension and engine detail that gives the model its authentic single-seater layout. Synthetic rubber tires add the correct racing look, and the newly designed tires and metal funnel covers sharpen the finish around the wheels and intake area. Decals are included for the Lotus as seen at the British and German Grands Prix, focusing the completed car on a specific 1978 appearance. Assembly is required, with a stated build time of 600 minutes. On a shelf, desk or in a display case, the long low body, open-wheel layout and black-and-gold race livery create a strong period Formula 1 presence. The removable cowl sections also suit builders who like to revisit cockpit, engine and chassis detail after the model is complete.

Model car kits 1:24

1:24 Audi quattro, plastic model kit, 2-door coupe

€31.49

This 1:24 scale plastic model kit recreates the Audi quattro with the compact proportions and muscular lines that defined the original 2-door coupe. At 185 mm long, 79 mm wide and 57 mm high, the finished model has a substantial presence, while the flared fenders and spoilers give the body its unmistakable performance-focused shape. Beyond the outer shell, the kit brings key mechanical and cabin details into the build. The inline-5 turbo engine is depicted alongside the suspension and 4WD drive system, giving the model substance beneath the bodywork. Inside, the shaped interior includes seats, dashboard and shift lever, so the cockpit reads as a complete space rather than a simplified insert. Decals reproduce the stripe patterns on the seats, adding a period-correct finishing touch that stands out through the glazing. The tires are molded in synthetic rubber and carry tread patterns that suit the road-going character of the car. A driver figure is included for builders who want to add an extra human element to the finished scene. The instructions show 4 body color options for painting: silver, red, white and blue. Tools, cement and paints are required separately.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Austin Mini Cooper 1275S Mk.1, model car

€26.79

The Austin Mini Cooper 1275S Mk.1 brings a well-known compact car into 1:24 scale, with proportions that translate the short wheelbase, upright body shape and unmistakable road-car profile into a display-sized model. This non-powered car format keeps attention on the visual character of the original vehicle, making the finished build stand out through its silhouette, painted surfaces and small-scale detailing. The 1:24 format suits builders who enjoy working on a manageable model size while still having room to refine body lines, cabin areas and exterior trim. The Austin Mini Cooper name carries strong classic-car appeal, and the 1275S Mk.1 designation places the build within a specific version of the Mini story rather than a generic small car theme. As a model from the Vehicles range and the Non-Powered Cars category, it is centred on assembly, finishing and presentation rather than motorised running. That makes colour choice, paint application and clean part alignment especially important to the final look. On a worktable, the compact scale supports focused painting sessions and careful assembly steps without demanding a large footprint. Once completed, the model sits naturally in a display cabinet, on a desk or alongside other 1:24 vehicle builds, where the classic Austin Mini shape remains easy to recognise at a glance.  Warning! Not suitable for children under 14 years.

Model car kits 1:24

1:24 Campus Friends II, plastic figure assembly kit

€29.49

Campus Friends II brings contemporary life into 1:24 scale scenes with 5 figures, a scooter and a group of everyday accessories shaped for modern street, parking and campus-style displays. As a plastic figure assembly kit, it gives static vehicle models a human setting, whether the scene calls for a walking character, a rider paused beside the scooter or a figure raising a smart phone for a selfie. The set updates the idea of the 1983 Campus Friends release with newly scanned parts and accessories suited to the 2020s. Four female figures and 1 male figure are included, and the sculpting uses 3D scanning to capture subtle clothing creases and natural body posture. One male figure and 1 female figure have a choice of head parts, while 2 additional female figures offer alternate right arm components, allowing different gestures across repeated builds. The accessory selection adds further scene detail with bags, a coffee cup and a guitar case that can be placed to support casual arrival, waiting or social moments around a vehicle. Assembly is required, with an indicated build time of 600 minutes. Paint and cement are not included. The set pairs especially well with models from the 1:24 Sports Car Series, where the figures can populate roadside stops, car meets, forecourts or urban dioramas with a more lived-in scale atmosphere.