Tamiya Product Range
Discover the fascinating world of Tamiya model making! Here you will find everything your heart desires: from RC cars and model cars to an extensive range of modelling accessories. Immerse yourself in high-quality and detailed replicas: perfect for beginners and professionals alike!
Military figures & Accessories 1:35
1:35 Fig.-Set Ger. MG Troops (7)
300035038€7.19
Article number: 300035038 Product: 1:35 Fig.-Set Ger. MG Troops (7) This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns. ★Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Audi V8 1992 Touringcar (TT-02)
300058699€159.99
Article number: 300058699 Product: 1:10 RC Audi V8 1992 Tourenwagen (TT-02) Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring. Warning notices! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Porsche 911 GT3 R (992)
300058745€169.99
Tamiya is proud to announce the release of the Porsche 911 GT3 R (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. Based upon the Porsche 911 GT3 (released as our 1/10 R/C kits – Items 58712 and 47496), in July 2022, the Porsche 911 GT3 R (992) was announced as a car which was developed to conform to GT3 regulations. With a horizontally opposed 6-cylinder engine capable of 565ps, this car features lightweight body (only about 1,250kg) with carbon fiber, and flourished at global races such as NLS (Nürburgring Langstrecken Serie) 2024 and 2024 Fanatec GT World Challenge Asia Powered by AWS. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Sdkfz.251/1 Halft. Hanomag (5)
300035020€22.99
Article number: 300035020 Product: 1/35 WWII Sdkfz.251/1 Halbk. Hanomag (5) In 1938, the German Army decided to develop an armoured personnel carrier on the basis of the 3-ton half track (HL-KL-9p). Hanomag Hannoversch Machinenbau (AG) in Hannover was ordered to develop the running gear and Bussing-NAG in Berlin was to develop the superstructure to be armoured. Design work was hastened on the model of existing armoured cars and a prototype was completed at the end of 1938. The Germans tested the prototype in the Kumahsdorf Proving Ground and accepted it for mass production. Thus was born the Armoured Personnel Carrier Hanomag Sdkfz 251/1 which, we may safely say, was a synonym for the German mechanized corps that showed activity in all battlefields throughout the war.
Model car kits 1:24
Carbon Decal Twill EF
300012682€8.19
Article number: 300012682 Product: 1:6/1:12/1:24 Carbon Dekor Köper/Ex.Fein Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/extra fine, 130x 190mm sheet size, instructions.
Model motorcycle kits 1:12
1:12 Ducati Superleggera V4
300014140€55.99
Article number: 300014140 Product: 1:12 Ducati Superleggera V4 Tamiya is proud to announce the release of the Superleggera V4 as a new addition to our 1/12 Motorcycle Series. The Superleggera V4 is a road-legal version of the Panigale V4 produced by the legendary Italian motorcycle manufacturer, Ducati. This motorcycle’s cornerstone is the lightening facilitated by carbon fiber material in the fairings, chassis and swing arm, and its eye-catching design features the distinctive carbon fiber biplane wings on either side of the front cowl for aerodynamics. The engine is the Desmosedici Stradale R, a 998cc V4 powerplant with Ducati’s Desmodromic valve timing system. This motorcycle also uses Öhlins suspension and Brembo brake system. In addition, installation of the Akrapovič titanium muffler – which is for the racing kit – with a dedicated engine part results in a superb power/weight ratio of 1.54hp/kg. Do not miss this great chance to get our assembly kit model of this rare super-bike; only 500 of the full-size motorcycle were produced. Kit model, scale 1:12, Street Version, engine, frame, fairing, racing motorcycle stand, semi-slick tires, exhaust system, instructions, decal, Length 176mm. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Castrol Toyota Tom´s Supra GT
300024163€26.99
Article number: 300024163 Product: 1/24 Castrol Toyota Tom´s Supra GT The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the '93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the '95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season. Warning! Not suitable for children under 14 years.
- 17 %
Model car kits 1:24
1:24 Porsche Turbo 1988 Roadversion
300024279€35.99
Article number: 300024279 Product: 1/24 Porsche Turbo 1988 Streetversion Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbos impressive design and performance made it the most well known member of the 911 series. About the Porsche 911 Turbo The 911 Turbo debuted in 1975 as Porsches first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbos distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Tank Barricade
300035027€5.49
Article number: 300035027 Product: 1:35 Diorama-Set Tank Barricade This is a 1/35 scale plastic model asembly kit recreating barricades that will add a whole extra level of detail to your diorama scenes. ★ Creates six each of wooden and metal barricade depictions. Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1)
300035213€17.99
Article number: 300035213 Product: 1:35 Ger. Pkw.K1 Kübelwagen Typ82 (1) The highly reliable, compact Kübelwagen Type 82, which served as transportation for high ranking German officers throughout WWII, now comes realized as a plastic assembly model kit. ★The model realistically captures the functional form of this mass produced car. ★The plain constitution of the press-lined body as well as the suspension arms, under guards, suspension area, and interior details such as the instrument panel and pedals all feature a realistic finish. ★You may choose to assemble all four doors in either open or closed positions. ★A figure depicting a driver in a relaxed pose is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1)
300035194€45.99
Article number: 300035194 Product: 1:35 Ger. SdKfz.181 Tiger I Mid.Prod.(1) The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII. This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944. The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced. The model features link type assembly tracks to enhance scale realism. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Jap. Med.Tank Type 97 Chi-Ha (2)
300035075€18.99
Article number: 300035075 Product: 1:35 Jap. Med.Tank Type 97 Chi-Ha (2) This is a 1/35 scale plastic model assembly kit depicting the Type 97 tank fielded by Imperial Japanese Forces in the Pacific War. ★ From the riveted armor to the short 57mm barreled gun, the form of the tank is captured in style. ★ Features a removable engine room grille, with depiction of oil cooler underneath. ★ Comes with one full body and one torso figure, plus no fewer than six marking options. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1/12 Yamaha YZF-R1M
300014133€49.99
Article number: 300014133 Product: 1:12 Yamaha YZF-R1M This is the latest release in the storied Tamiya 1/12 Motorcycle Series, and it recreates the 2018 spec of the highly successful YZF-R1M. 2018 is a landmark year for the long-running YZF-R1, as it celebrates its 20th anniversary; the YZF-R1M is the eighth generation of the bike, released in 2015. It was designed as a circuit motorcycle, and its design and technology were heavily influenced by data harvested from the YZR-M1 MotoGP bike. • This is a 1/12 scale plastic model assembly kit. • Multi-piece recreation of the 4-cylinder engine has superlative detail, from the fine depictions of the radiator, oil cooler and complex cover, to the tubing included to recreate various lines. • Depictions of engine, swing arm, front fork, upper cowl and more are screw-fixed to the frame for maximum precision and durability. • New synthetic rubber tires depict Bridgestone Battlax RS10s with realistically-recreated tread pattern. • Metal transfer to depict Yamaha emblem tentatively planned for inclusion.
On-road RC cars (2WD/4WD)
1:10 RC Citroen 2CV Charleston (M-05)
300058655€144.99
Article number: 300058655 Product: 1:10 RC Citroen 2CV Charleston (M-05) This radio control model faithfully recreates the world-renowned Citroën 2CV Charleston. The polycarbonate body sits on top of Tamiya’s fun to drive M-05 front wheel drive chassis. Over 3.5 million cars were produced from 1948 to 1990. Its reliable air-cooled 2-cylinder engine got the little front wheel drive car from A to B with little fuss, and the car could accommodate 4 adults adequately. With its soft suspension designed for off-road driving, it is said that the 2CV could traverse a ploughed field without breaking any of the eggs it carried. M-05 at a glance: The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Gun metal color 11-spoke wheels are matched with tread-patterned radial tires and feature tire inserts.
RC buggys (2WD/4WD)
1:10 RC The Grasshopper i 2005 2WD Re.Re
300058346€119.99
Article number: 300058346 Product: 1/10 RC The Grasshopper i 2005 2WD Re.Re Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 380 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Military figures 1:16
1:16 WWII Figure Ger. Machine Gunner GC
300036306€18.99
Article number: 300036306 Product: 1:16 WWII Figure Ger. Machine Gunner GC This is a plastic assembly kit model of a WWII German machine gunner wearing a greatcoat and shouldering a MG42 machine gun. The coat features separate parts to depict a wider collar and hems to provide the model with greater realism. Equipment such as the MG42 machine gun and gas mask case have a detailed finish. Warning! Not suitable for children under 14 years.
Model car kits 1:20
1:20 Seat Belt Set A
300012637€7.19
Article number: 300012637 Product: 1/20 Seat Belt Set A Add greater realism to your 1/20 scale Grand Prix model with this Detail-Up parts set. This set is perfect for models depicted from the early 1970's to the early 1980's. Kitmodel, Scale 1:20, 6-Point- Racing Seatbelt, Logosheet, Photo- etchedparts, Manual, Decal.
Military figures & Accessories 1:35
1:35 Fig-Set Ger. Front-Line Soldiers(5)
300035196€11.99
Article number: 300035196 Product: 1:35 Fig-Set Ger. Front-Line Soldiers(5) During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish. Why not display this set with a German armored vehicle model such as a Sd.Kfz. 251/1? Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Tank Ammo Load. Crew (4)
300035188€12.29
Article number: 300035188 Product: 1:35 Fig.-Set Tank Ammo Load. Crew (4) This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells. ★ Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. ★ Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models. Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set US Infant. W-Europe (8)
300035048€7.19
Article number: 300035048 Product: 1:35 Fig.-Set US Infant. W-Europe (8) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in action in Western Europe during WWII. ★Contains parts for eight figures in total. ★Figures are depicted in 1941 and 1943 issue uniform. ★Comes with a plethora of parts for firearms such as M1 rifle and M1 carbine, as well as plenty of accessories like holsters and packs. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3)
300035047€7.59
Article number: 300035047 Product: 1:35 Ger. 7,5cm Anti Tank Gun(PAK) (3) This is a 1/35 scale plastic model assembly kit depicting the L/46 75mm Pak40 anti-tank gun used by German forces in WWII. ★ The imposing form of the long-barrelled gun is captured in style, down to details such as sight and handle. ★ Barrel offers elevation and traverse, while the breech also slides and the carriage can be moved as well.★ Comes with three figures, plus accessories such as amom cases, shells and more. Scope of delivery: kit, instructions. decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Kingtiger Ardennen Fro. (3)
300035252€59.99
Article number: 300035252 Product: 1:35 Ger. Kingtiger Ardennen Fro. (3) Development of the massive King Tiger began in February 1943 to counter the increasing threat of Russian Tanks. A more powerful cannon was added, upgrading from the L56, 88mm of the Tiger I to the Type 43 L71, 88mm high velocity gun. The chassis front armor was 150mm thick with 80mm thick side armor. The Henschel and Porsche companies came up with rival turret prototypes. After the trial production of 50 tanks with the Porsche turret, the Henschel design, with its extremely thick armor that measured 185mm on the front and 88mm on the side panels, was adopted for mass production. The Henschel turret itself was revised mid-way through production, from a stepped gun mantle to a smooth one. Due to the havoc wreaked by the King Tiger I during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the King Tiger up until the very last day of the war. As for the DKW NZ350 military motorcycle, production began in 1940. However, this German military motorcycle experienced mid-production changes when resources became limited towards the end of the war. DKW NZ350s at that time were seen with smaller headlights and thinned-out fenders. About the Model ★Tamiya presents a 1/35 scale model of the German King Tiger as it appeared during the final German offensive in the Ardennes Forest of Belgium. ★Total length: 294mm, total width: 108mm. ★>Henschel design turret recreated in superb detail. ★Kit includes parts for two different types of gun mantles- stepped and smooth. ★Turret's rear escape hatch can be opened and closed after assembly. All other hatches can be assembled in the open or closed positions. ★Kit includes DKW NZ350 German Military Motorcycle recreated as it appeared during the latter stages of World War II with smaller headlight and thinned-out fender. ★Three figures included: Tank commander and orderly wearing leather jackets, and tank crewman. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger.Tank Destroyer Jagdtiger Ea(2)
300035295€82.99
Article number: 300035295 Product: 1:35 Ger.Tank Destroyer Jagdtiger Ea(2) During the later stages of WWII, the heavy tank destroyer Jadgtiger (which weighed in excess of 70 tons and had an impressive 12.8cm gun and thick armor) was the heaviest tank seen on both the eastern and western fronts. Tamiya is releasing this 1/35 scale Jagdtiger after its first release 33 years ago in commemoration of the 40th year anniversary of the 1/35 Military Miniature series. Lining this Jagdtiger up with other 1/35 scale tanks like the German King Tiger Production Turret (35164), German King Tiger Porsche Turret (35169), German Tank Destroyer Jagdpanther Late Version (35203), German King Tiger (Ardennes Front) (35252), and German Tank Destroyer Hetzer Mid Production (35285) would make for an imposing display. •Completely new design. •Interior details such as the gun breach area and the floor boards are reproduced. •Commander and driver torso figures included. •5 kinds of markings for the 653rd Heavy Tank Battalion included. •Along with its extended hull, the spare track link racks and jack are also realistically reproduced. •The separately molded disc parts of the road wheels add extra depth to the model. •Two kinds of tracks are included; easy to assemble belt type and connectible assembly type. •A choice of stowed or extended traveling clamps. •Photo-etched parts for the engine intake protective net included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set MG-Crew Maneuver (5)
300035184€12.29
Article number: 300035184 Product: 1:35 WWII Fig.-Set MG-Crew Maneuver (5) This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.
Military figures & Accessories 1:35
1:35/1:16 WWII Figure Insignia Decal-Set
300112625€10.49
Article number: 300112625 Product: 1:35/1:16 WWII Figure Insignia Decal-Set Use these easy-to-use German Military Insignia decals to add even more exquisite detail to your WWII German military figures. These are designed with the modeller in mind to save time and stress allowing for a more realistic finish. WW2 Ger.Insignia 1/16 1/35
Model aircraft kits 1:48
1:48 Ger. Messerschmitt BF109E-4/7 Trop
300061063€28.99
Article number: 300061063 Artikelbezeichnung: 1:48 Ger. Messerschmitt BF109E-4/7 Trop The Messerschmitt Bf 109E was the Luftwaffe's mainstay fighter in the early stages of WWII. This kit depicts the E-4, which was produced from May 1940 and saw extensive action during the Battle of Britain, and the E-7, which was fitted with a drop tank for increased range. The angular form of the aircraft has been accurately reproduced complete with details such as a canopy that may be assembled in open or closed position, a rack for the E-7's drop tank, and the Trop version's air intake with sand filter. One pilot figure and three marking options are included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1/35 German Tank Crew Set
300035354€19.99
Article number: 300035354 Product: 1/35 German Tank Crew Set This is a German tank crew figure set. The last German figure set was designed way back in 1996. This comprehensive set features 8 figures in highly realistic pose, that are adaptable to use with a multitude of WWII German armor kits. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1/48 F-35A Lightning II
300061124€97.99
Article number: 300061124 Product: 1/48 F-35A Lightning II Here is an outstanding entrance into the legendary 1/48 Aircraft Series: this time, the A variant of the Lockheed Martin F-35 Lightning II. The F-35 - variant A for the Air Force, B for the Marines and C for the Navy – was developed under the Joint Strike Fighter Program (JSF), and is seen as one of the fifth generation fighters. These aircraft possess highly advanced stealth characteristics and network connectivity, plus superior situational awareness provided by numerous integrated sensors. The F-35 Lightning II was first delivered in 2015, and deployment of over 3,000 F-35s is planned around the world. Inheriting the Lightning appellation from the famed P-38, the F-35 will lead worldwide air arms for many years to come. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC 1991 Audi V8 Touring (TT-02)
300058682€154.99
Article number: 300058682 Product: 1:10 RC 1991 Audi V8 Touring (TT-02) Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title. About the Model • This is a 1/10 R/C model assembly kit. • The powerful, imposing body is molded accurately in lightweight and durable polycarbonate. • Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job. • Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs.
On-road RC cars (2WD/4WD)
1:10 RC Impreza Monte-Carlo 99 (TT-02)
300058631€164.99
Article number: 300058631 Product: 1:10 RC Impreza Monte-Carlo 99 (TT-02) The TT-02 chassis line-up is Tamiya's entry level 4WD platform. It allows new kit builders an easy gateway into the world of on-road running due to its easy construction, balanced performance and high aftermarket Hop-Up Option support. This TT-02 kit features the Subaru Impreza rally car that took part in the Monte Carlo Rally of the 1999 World Rally Championship (WRC) season. The Impreza was a legendary force in the WRC from the 1990s and into the next millennium, with 3 manufacturers' championships in a row from 1995-1997. In 1999 they were still competitive with an impressive 1-2 finish for drivers Kankkunen and Burns in Argentina (round 7). The TT-02 chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well, as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Neo Scorcher (TT-02B)
300058568€149.99
Article number: 300058568 Product: 1:10 RC Neo Scorcher (TT-02B) The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss, thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals! The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while L/R suspension arms and uprights are identical to facilitate hassle-free assembly. F/R gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening 4 screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC NISMO R34 GT-R Z-Tune (TT-02D)
300058605€234.99
Article number: 300058605 Product: 1/10 RC NISMO R34 GT-R Z-Tune (TT-02D) The R34 GT-R is given a new release on the new Tamiya standard for drift driving, the TT-02D chassis. The R34 was the 5th generation of the legendary Nissan GT-R series of cars; it debuted at the 2005 Tokyo Auto Salon. The Z-Tune version was an even more impressive beast; developed by Nissan's in-house motorsports/ performance division NISMO, it was built around a 500hp 2.8-liter powerplant that could reach 8,000rpm. It also featured SACHS adjustable suspension and brakes developed in conjunction with Brembo. NISMO also went to work on the body, with racing features such as vents and wider fenders than the original. The body color was the aptly-named Z-Tune Silver, applied specially for this car. With only 20 production cars made, getting your hands on one is a difficult task, but you can pilot it in R/C form with this model! About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive 2-door coupe form is captured faithfully by the polycarbonate body. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58419. • Export version only includes LEDs to recreate lights on the car. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Nissan Skyline GT-R R33 (TT-02D)
300058604€194.99
Article number: 300058604 Product: 1/10 RC Nissan Skyline GT-R R33 (TT-02D) Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes. About the Model • This is a 1/10 scale R/C model assembly kit. • The distinctive, powerful body of the R33 is recreated in durable polycarbonate. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink. • Stickers and masking stickers are included in the kit. • Mesh-type wheels are paired with super driftech tires. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Plasma Edge II TT-02B 4WD
300058630€149.99
Article number: 300058630 Product: 1:10 RC Plasma Edge II TT-02B 4WD This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Porsche 911 GT3 (992) TT-02
300058712€159.99
Article number: 300058712 Product: 1:10 RC Porsche 911 GT3 (992) TT-02 Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC T/GR Yaris Rally1 Hybrid TT-02
300058716€159.99
Article number: 300058716 Product: 1:10 RC T/GR Yaris Rally1 Hybrid TT-02 Here comes an additional 1/10 R/C model assembly kit based on our popular TT-02 chassis – this time, Toyota GAZOO Racing WRT/GR Yaris Rally1 Hybrid. To comply with the Rally1 restriction which started in 2022, manufacturers developed new cars compatible with hybrid system, and Toyota made the GR Yaris Rally1 Hybrid. The combination of hybrid unit integrated with motor and generator and engine is capable of over 500PS and 500Nm, while the car also features regenerative charging during brake function. A 1.6-liter inline 4-cylinder direct injection turbo engine uses non-fossil fuel. In addition to side skirts and large rear wing, air ducts are equipped right and left at the rear to cool down the hybrid unit. In 2022, it achieved both Manufacturer’s and Driver’s Championships. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
- 27 %
Off-road RC cars
1:10 RC Toyota LC 40 Yel Painted CC-02
300047490€274.99
Article number: 300047490 Product: 1:10 RC Toyota LC 40 Yel Painted CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 40 as our new R/C model on the cross country CC-02 chassis. The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. The long-selling Land Cruiser 40 series was sold from 1960 to 1984, and employed front / rear rigid axles with leaf springs, and durable ladder frame. This R/C model assembly kit recreates the 1972 Land Cruiser FJ40V which is one of the most popular cars in that series. Pre-Painted Body. 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, pre-painted Polycarbonat Body, Type 540 Motor, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Honda Dax125 Tamiya Edition
300014142€27.99
Article number: 300014142 Product: 1:12 Honda Dax 125 TAMIYA Edition Tamiya is proud to announce the release of the Honda Dax125 Tamiya Limited Edition as a new addition to our 1/12 Motorcycle Series. (The first generation Dax in 1969 was recreated by Item 16002.) Following on from the popular Monkey (Z-series) bikes, the Honda minibike Dax was announced in 1969. The Dax had a distinctive T-bone frame crafted in pressed steel which housed the fuel tank, and centrifugal clutch engine. It was designed to be ridden by anyone, anywhere, and its charming, distinctive form was loved all around the world. Although its Japanese sales finished in 1981, the Dax returned in 1995 with a similar design to the original. In 2022, Honda announced the Dax125 which inherits the established Dax identity, incorporating elements such as the T-bone frame, a long bench seat, a chrome upswept muffler and more. It can be ridden both on city streets and the open road. Owners can choose between the rich tone of pearl nebula red and understated yet elegant pearl cadet gray for the body. This Dax125 has a limited edition: the Dax 125 Tamiya Limited Edition - the idea of official Honda dealer Cub House in Thailand - which was announced at the 2023 Bangkok International Motor Show. It employs a sumptuous metallic blue body adorned with Tamiya twin star logos plus some checkered flag motifs to get the pulse racing. With dedicated stickers for the muffler heat guard and wheel rims, this version features a horn cover with Dachshund emblem, dedicated serial number for each of these limited edition bikes, and dedicated helmet with Tamiya logo. It certainly fascinated motorcycle fans - whether that be full size or in miniature scale – across the globe. Assembly kit, 1/12th scale, Length: 147mm, paints and cement are separate required Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Yamaha YZF-R1 1000ccm 1997 Street
300014073€33.99
Article number: 300014073 Product: 1:12 Yamaha YZF-R1 1000ccm 1997 Street At the Motorcycle Show held in Milan, Italy, in September of 1997, the Yamaha YZF-R1 supersport motorcycle made its debut. Sporting a powerful 1000cc engine, it has the compact construction of a 400cc bike. The YZF-R1 was developed for maximum possible cornering ability in a production motorcycle. With a 1000cc water-cooled, four stroke, 4-cylinder, 5-valve engine and adopting a redesigned EXUP exhaust system, it pumps out 150hp of high-intensity power. Subtle throttle control makes both superb acceleration response and rhythmic cornering a reality. The Deltabox II aluminum frame was sought after not only for its rigidity, but more so for its moderate flexibility during tight cornering. With the addition of a long span aluminum swing arm, high control ability has been achieved. By adopting an upside-down front fork, stroke distance has been increased and traction heightened. Boasting a sharp form with multi-reflector lights, the YZF-R1 has been given an unprecedented style. From the contact points between the rider and motorcycle, right down to the material used in the seat and tank, the YZF-R1 has been thoroughly studied. Of course, the abundance of high precision and high quality parts goes without saying. Designed to cruise at high speeds on winding roads, the YZF-R1 shatters expectations about large exhaust engine motorcycles. Yamaha has expanded the possibilities of a 1000cc bike. Warning! Not suitable for children under 14 years.
Military figures 1:16
1:16 Fig. Bundeswehr Tankcr. Leopard (2)
300036309€22.99
Article number: 300036309 Product: 1:16 Fig. BW Tankcrew Leopard (2) This is a 1/16 scale plastic figure assembly kit depicting tank crew of the Bundeswehr. ★Includes parts for one full-body figure in standing pose, and a torso figure for use in 1/16 scale Leopard 2A6 models. ★Separate parts recreate microphone and headset. ★Clear parts are used to depict goggles. ★Includes decals for various insignia, and a display base. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Mercedes Benz SL300 Gullwing
300024338€60.99
Article number: 300024338 Product: 1:24 Mercedes Benz SL300 Gullwing The Mercedes-Benz 300SL joins the 1/24 Sports Car Series as it is considered an all-time classic in the automotive world. The real car began life as a prototype for the German motor giant’s works racing team, taking part in international races, and in 1954 a production version debuted at the International Motor Show in New York. Despite nominal road car status the 300SL was still a very racy vehicle and proved popular, particularly in the United States. It possessed a 3-liter engine (hence the 300 in its name), and a highly lightweight body (SL stands for Sport Leicht, lit. "light sports") with striking gull wing doors. 1,400 cars were produced by the end of its production run in May 1957. The Tamiya model kit captures the real life subject down to the working Gull-Wing doors and complex tubular space frame. Productdetails: - This is a 1/24 Scale plastic model assembly kit. - The elegant form of this classic is breathtakingly captured by the model, and includes opening engine hood and gull wing doors. The doors can be locked in open position using a small strut. - Opening the hood reveals the faithful depiction of the engine. Hood can also be locked in open position. - The complex tubular space frame – one of the signature points of the car – is elegant recreated. - Nylon mesh is included to recreate the front air intake - Numerous metal-plated parts recreate side bars, bumpers and more. - Comes with masking stickers for use when painting the model. - Metal transfers are included in the kit to depict mirror surfaces and emblems. - Features newly-designed tire parts. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Toyota Supra
300024123€28.49
Article number: 300024123 Product: 1/24 Toyota Supra During the early 1970's, the Toyota Motor Company of Japan ventured into the specialty car field, and soon established a reputation for producing cars with both quality and performance. Their "Supra" series is often described as a re-creation of Toyota's legendary 2000GT sports car, which was an excellent combination of high performance and elegance. Using their latest racing automotive technology, plus their uncanny design genius, the newly designed Supra made its sensational debut during February 1993. Massive and powerful are the words that can best describe this awesome specialty sports car. The top of the line Supra uses a 3-Liter, DOHC 24 valve, straight six cylinder, twin-turbocharged engine, capable of 320 horsepower and 43.6kg/m of torque. In contrast with the company's previous Supra model, which had a very fluid styling composed of gentle curves, the new Supra has a bold dramatic appearance due to its wider body and larger 17-inch wheels. An oversized rear wing has been installed to improve downforce performance during high-speed cruising. This Supra's newly refined suspension has one of the best road holding systems offered by any mass produced sports car, and with its ventilated disk brakes fitted at all corners, and the front end utilizing four piston calipers, it has unmatched stopping power.
Military model vehicles 1:35
1:35 BW MBT Leopard 1A4 (1)
300035112€23.99
Article number: 300035112 Product: 1:35 BW MBT Leopard 1A4 (1) This is a 1/35 scale plastic model assembly kit recreating the Leopard A4 which began production in 1974. ★ From the spaced armor to the 105mm gun, the powerful form of the tank is captured in style. ★ Notable details include the MG3 machine gun and searchlight. ★ Comes with a commander figure to add even more detail to your finished model. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Allied Vehicle Access.
300035229€11.99
Article number: 300035229 Product: 1:35 Diorama-Set Allied Vehicle Access. You will be able to provide your 1/35 scale model with an even greater air of realism once it is fully loaded with accessories from this set. A rich assortment of allied army use equipment such as drum cans, jerry cans, buckets, a variety of canvas goods including bags, and vehicle weight plates are realistically reproduced. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Ger. Weapons Inf.(24)
300035111€5.29
Article number: 300035111 Product: 1:35 Diorama-Set Ger. Weapons Inf.(24) This is a 1/35 scale plastic model assembly kit depicting a whole host of armament typically carried by WWII German infantry. ★Firearms in the set include Luger P08 and Walther P38 pistols, Kar98K and G41 rifles, MP40 submachine guns, MP44 selective fire rifles, Pz.B.39 anti-tank rifles, MG34 and MG42 machine guns, magnetic mines, and even the Panzerfaust. ★Accessories such as tripods, ammo cases and more are also in the set. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Livestock (18)
300035128€8.39
Article number: 300035128 Product: 1:35 Diorama-Set Livestock (18) Add an extra layer of authenticity to your diorama with this comprehensive set. It contains parts to depict a mule (x1), dog (x1), calf (x1), pig (x1) and piglets (x3), roosters (x2), hens (x2), chicks (x3), eggs (x6), geese (x2) and rabbits (x2). Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Soilder w/ Bicycle (2)
300035240€12.99
Article number: 300035240 Product: 1:35 Diorama-Set Soilder w/ Bicycle (2) This is a plastic assembly model kit which includes two German soldiers on bicycles. Separate parts to depict the bicycles' handles and pedals as well as detailed wheel spokes and seats provide the models with added realism. You can choose to assemble the soldier figures in either a standing or cycling pose. Display your models on their own or even as a part of a larger diorama.
Military figures & Accessories 1:35
1:35 Diorama-Set US/Dt.Jerry Can Set
300035026€5.49
Article number: 300035026 Product: Gear bag 58618 Mt.Beetle This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. ★Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. ★Includes nine each of U.S. and German type jerry cans, plus three each of new and dented barrels. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set Ger. Tank Crew Rest(6)
300035201€10.99
Article number: 300035201 Product: 1:35 Fig-Set Ger. Tank Crew Rest(6) This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models. Set includes 6 figures.
Military model vehicles 1:35
1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4)
300035035€7.19
Article number: 300035035 Product: 1:35 Ger. 3,7cm PAK 35/36 w/Fig. (4) This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces. ★The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement. ★Choose between standard and late-war barrels. ★Comes with various accessories and four figures as a mini-diorama in its own right. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Halftr. w/4-Bar.AA Gun (5)
300035050€32.99
Article number: 300035050 Product: 1:35 Ger. Halftr. w/4-Bar.AA Gun (5) Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these. Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately. The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1) Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. PzKpfw. IV Ausf. D (3)
300035096€21.99
Article number: 300035096 Product: 1:35 Ger. PzKpfw. IV Ausf. D (3) This is a 1/35 scale plastic model assembly kit depicting the Ausf.D variant of the German WWII tank Pz.Kpfw.IV. ★From the short-barrelled 75mm gun to the powerful design, the form of the tank is recreated in style. ★Comes with parts to recreate either early or late production Ausf.D variants. ★Includes three figures depicted in uniform seen during the invasions of Poland and France in the opening years of WWII. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1)
300035209€43.99
Article number: 300035209 Product: 1:35 Ger. SdKfz.161/1 Panzer IV H Ea.(1) During WWII, the most important tank used by German forces throughout the entire conflict, and also the most produced was the Pz.Kpfw.IV. This is a 1/35 scale plastic assembly model kit of the German Pz. Jpfw. IV Ausf.H Early Version which is generally regarded as the definitive model of the Pz.Kpfw.IV tanks. The model accurately depicts the tank with its powerful 48 caliber 75mm gun and Schürzen that surrounded the tank sides and turret. The kit includes two kinds of hull front plates and sprocket wheels to allow you to create a model from different dates of production. Also included is a tank commander figure wearing a winter issue jacket.
Military model vehicles 1:35
1:35 Ger. SdKfz.173 Jagdpanther Late.(1)
300035203€39.99
Article number: 300035203 Product: 1:35 Ger. SdKfz.173 Jagdpanther Late.(1) The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun. A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model. You can choose to assemble a Jagdpanther produced from May to December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat. Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers. A commander figure is also included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.222 Light Arm. Vehic.(1)
300035270€32.99
Article number: 300035270 Product: 1/35 WWII SdKfz.222 Light Arm. Vehicle(1) German Armored Car Sd.Kfz.222 Throughout WWII, Germany carried out an extensive program of armored vehicle development, deploying a vast range of armored vehicles to the front line. Amongst these vehicles, the compact 4WD Sd.Kfz.222 remains one of the most famous and popular. Featuring welded plate armor particular to German vehicles at that time, the Sd.Kfz.222 was fitted with a rotating open top turret protected by grenade deflecting mesh screens. The 222 was equipped with an anti-tank and anti-aircraft 20mm main gun and a 7.92mm machine gun. Featuring a 4WD chassis with fully independent suspension and optional 4-wheel steering, it had a top speed of 90km/h. An exceptional off-road vehicle, the Sd.Kfz.222 was seen on all fronts throughout the middle phases of WWII. Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Photo- etched parts, Length 134 mm. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger.Flak 8,8 w/Motorcycle (9)
300035017€32.99
Article number: 300035017 Product: 1/35 WWII Ger.Flak 8,8 w/Motorcycle (9) This famous weapon is well known for its role in World War II. It did, in fact, have its origins during the first World War, when guns of this calibre were used in an anti aircraft role. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US MBT M1A2 Abrams Iraqi Freedom(2)
300035269€56.99
Article number: 300035269 Product: 1/35 US MBT M1A2 Abrams Iraqi Freedom(2) U.S. M1A2 Abrams 120mm Gun Main Battle Tank The M1 Abrams, the worlds' strongest tank, has undergone step-by-step modification since its commission by the US military in 1980. The M1A2 evolved from the M1A1HA, and features Intervehicular Information System (IVIS) and Commander's Independent Thermal Viewer (CITV). Kit features A2 turret comes with CITV and new style vision block. About the M1A2 Abrams The M1 Abrams, officially commissioned by the US military in 1980, was designed totally different from previous post-WWII US military tanks. Although fitted with the same 105mm cannon as the M60, the M1 was powered by a gas turbine engine and was fitted with spaced armor. Planned to be commissioned by the US military over a long period, the M1 was designed with future reforms in mind. In 1984, the M1A1 was developed with a 120mm smooth bore cannon, and a further variant the M1A1HA was later developed featuring depleted uranium armor. This then led to the M1A2, which was fitted with Intervehicular Information System (IVIS), Commander's Independent Thermal Viewer (CITV) turret and new style vision block. The M1A1HA and the M1A2 both played significant roles in Operation Iraqi Freedom, being deployed by land forces as well as the Marine Corps as they moved toward Baghdad. Model kit, Scale 1:35, Vehicle, 3 Figures, Manual, Decal, Length 283 mm.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set Ger. Assault Tro. (8)
300035030€7.19
Article number: 300035030 Product: 1:35 WWII figure set German. infantry (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII US Ford GPA Amphibien-Fhz. (3)
300035336€36.49
Article number: 300035336 Product: 1:35 WWII US Ford GPA Amphibien-Fhz. (3) The Ford GPA was a unique vehicle which was deployed not only on the U.S. side by the Army and Marine Corps, but also later by Russian forces. It was often called a "seep" (an abbreviation of "seagoing jeep") on account of its amphibious nature. The front-engine 4WD vehicle shared much of its design and parts (including the engine) with Ford's GPW. Around 12,800 units were produced by 1943. This kit includes a variety of new parts to update Item 35043 U.S. Amphibian Ford GPA Kit. Warning! Not suitable for children under 14 years.
Model ships 1:350
1:350 Jap. Schwerer Kreuzer Chikuma
300078027€134.99
Article number: 300078027 Product: 1:350 Jap. Heavy Cruiser Chikuma This is a highly detailed scale model replica in 1/350 scale of the Japanese Heavy Cruiser Chikuma. Historical background Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN's success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita's fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island. Warning! Not suitable for children under 14 years.
Model ships 1:350
1:350 Photo-Etched Handrail Set A
300012642€18.99
Article number: 300012642 Product: 1/350 Photo-Etched Handrail Set A This set includes 8 different kinds of photo-etched handrail posts. The handrails allow the modeler to pass through 0.1 mm diameter wire to add greater detail and finish. This set may also be used with other Tamiya 1/350 scale Japanese Navy model ships.
Model ships 1:350
1:350 U.S. Navy DD445 Fletcher
300078012€35.99
Article number: 300078012 Product: 1:350 U.S. Navy DD445 Fletcher A Highly Decorated Destroyer USS Fletcher (DD-445) was the lead ship of her namesake class of destroyers, of which 175 were built during WWII, and she went on to a long and distinguished service career. Her balanced form as well as details such as her 5-inch DP gun turrets, quintuple torpedo launchers, twin 20mm anti-aircraft guns, and depth charge launchers have been accurately reproduced in this stunning model kit. The gun barrels, gun turrets, and torpedo launchers are all movable to enable dynamic posing. A display stand with name plate is also included. U.S. Navy DD445 Fletcher
Model ships 1:350
1:350 WWII Ger. Battleship Tirpitz
300078015€82.99
Article number: 300078015 Product: 1:350 WWII Ger. Battleship Tirpitz The sole sister ship of the Bismarck, the Tirpitz was a perpetual worry for the Royal Navy since its presence in Norway was a threat to Allied convoys. Considerable resources were spent countering her potential moves until she was finally sunk by Royal Airforce bombers. Tamiya now brings you this marvel of German engineering as a highly-detailed 1/350 scale assembly kit display model. The elegant lines of the Tirpitz are accurately reproduced and distinguishing features that set her apart from the Bismarck such as quadruple torpedo tubes are also recreated in great detail. The model comes with a specially made display base and a beautiful nameplate for an impressive display. 1/350 Tirpitz
Model ships 1:350
1:350 Yamato Wooden-Deck Sheet
300012645€30.99
Article number: 300012645 Product: 1:350 Yamato Wooden-Deck Sheet This set of deck sheets allows easy and beautiful reproduction of the wooden deck on Item 78025 1/350 scale Japanese Battleship Yamato. This 2-piece sticker has been pre-cut to match the shape of Yamato’s deck for easy application. Deck plank pattern is also precisely printed so there is no need for painting.
Model aircraft kits 1:48
1:48 Fairchild Republic A-10A Thunder.II
300061028€38.49
Article number: 300061028 Product: 1:48 Fairchild Republic A-10A Thunder.II About the Fairchild Republic A-10A "Thunderbolt II" The need for close air support, on small pin point targets, was recognized early during the Vietnam conflict. Following an experimental development program begun in the early 1970's, the Fairchild Republic Industries A-10 Thunderbolt II was selected for production. The performance characteristics demanded were for operation on unimproved short fields, both high and low airspeed maneuverability, easy maintenance, long loiter times and range, excellent pilot protection, and a capacity for large mixed weapons loads. The appearance of the A-10 is remarkable while its performance is amazing. Known affectionately as the "Wart Hog" by its pilots, it's a large single seat aircraft, identified by a pair of TF-34-100A high bypass fan jet engines mounted high near the rear of the twin tailed fuselage. A few of the specifications are: Length 53' 4"; height 14'8", span 57'6"; maximum gross weight 47,400lbs, including 16,000lbs of external stores. Internal armament is the GAU-8/A 30mm Gatling cannon capable of 2100 or 4200 rounds per minute. It carries 1350 rounds of ammunition, a fire control head-up display, CRT TV monitor, laser spot seeker plus a diversified armament panel that can facilitate any operational need. The A-10 has been around since 1972, and has again proven its worth during the recent Gulf war. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Ger. Focke Wulf Fw190 D-9
300061041€28.99
Article number: 300061041 Product: 1:48 Ger. Focke Wulf Fw190 D-9 Following the successful entry of the Focke-Wulf Fw190A series of fighter aircraft over the English channel during the autumn of 1941, the German RLM requested high altitude version to complement the fighter fleet, and three projects were started. The Fw 190B used the B.M.W. 801 turbosupercharged radial engine and a pressurized cockpit, but very few of these were built. The Fw190C was powered by a 1,750hp Daimler Benz DB603A in-line engine, of which three prototypes were built. The third high altitude project was based on the Focke Wulf Fw190A airframe and powered by a Junkers engine. The fuselage was lengthened to accommodate the V-12 cylinder, liquid cooled, 1,750hp Jumo 213 engine, and made its initial flight during the winter of 1941 - 42. Five further prototypes were produced, plus small batch of Fw 190 D-Os were completed from standard production Fw 190A-7 airframes. These pre-production aircraft were followed by the Fw190 D-2 through D-8 designations. The Fw 190D-9 began production in June 1944, with early versions having the flat topped canopy, and from W. Nr. 210002 onwards having the Galland hood (blown canopy). It went into combat with the III/JG 54 "Grunherz" (Green Hearts) in September 1944, at Achmer, Germany, as top cover for the new Messerschmitt Me262 Jet fighters then entering service.
Military model vehicles 1:48
1:48 Sd.Kfz. 251/1 Ausf.D Halftrack (2)
300032564€31.99
Article number: 300032564 Product: 1/48 Sd.Kfz.251/1 Ausf.D Halbkette (2) Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece of their mechanized corps throughout WWII. The half-track could drive on difficult terrain and could easily tow various kinds of trailers and cannons. The Ausf.D was designed for ease of production and various types were produced, including those equipped with wireless radios and gun turrets. However, the basic version was the troop carrier which seated 12and came armed with two MG42 machine guns. The half-track could be seen at every front and had an on-road top speed of 53km/h and a 300km operational range. Length: 126mm, Width: 48mm. As there were many variations of the Ausf.D, this 1/48 assembly kit model of the GermanMtl.SPW. Sd.kfz 251/1 Ausf.D Schutzenpanzerwagen depicts a personnel carrier. Parts such as the interior and undercarriage have been accurately reproduced with less parts for easy assembly. The included assembly type tracks have a realistic sag effect. A commander figure wearing a winter uniform and a soldier figure carrying a MG42 machinegun on his shoulders are included. (Total 2) Accessories such as the Panzerschreck, grenade cases, infantry equipment and so onare also included in this set. Three kinds of decals depicting Normandy and the Eastern front units are included. Model kit, Scale 1:48, Vehicle, 2 Figures, Manual, Decal, Length 126 mm. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 US North American P-51D Mustang
300061040€29.99
Article number: 300061040 Product: 1:48 US North American P-51D Mustang About the North American P-51D Mustang 8th AF In April 1940, drawings were sketched in a New York City hotel room for a new fighter aircraft for the British purchasing Commission. This fighter, the North American NA73X, became one of the best fighter aircraft in the U.S. Army Airforce during World War II, and is known as the P-51 Mustang. Of the several variations of this famous fighter, the P-51D is generally accepted as the definitive Mustang and was the first production version with the "Bubble" canopy. More "D" model Mustangs were built than all other Mustang variants combined, with a total of 9,603 coming off production lines. 45 squadrons of the famed U.S. 8th Airforce, stationed in England were equipped with the P-51D, which could now escort and protect the heavy bombers all the way to and from targets on the European continent. There were several major changes that set the "D" apart form earlier Mustangs. One was the change from four .50 caliber machine guns to six, three in each wing. Another was to mount the guns upright which helped to eliminate a jamming tendency that occurred in the four gun system. Ammunition was increased to 400 rounds per inboard gun, and 270 rounds for each of the other four. Underwing pylons were strengthened to carry the 110 or 165 gallon auxiliary drop tanks or 1,000 lb bomb. P-51D Mustangs went to fight in the later Korean conflict and it last flew combat in 1956 in the deserts to the Middle East, when Israel used Spitfires, Messerschimitts and Mustangs together in the Mid East conflict. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:6/1:12/1:24 Cable 0.5mm OD Bla 2m
300012675€4.49
Article number: 300012675 Product: 1:6/1:12/1:24 Cable 0.5mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,50mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Model car kits 1:24
1:6/1:12/1:24 Cable 1mm OD Bla 2m
300012678€4.49
Article number: 300012678 Product: 1:6/1:12/1:24 Cable 1mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 1,00mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Model ships 1:700
1:700 Jap. Shinano Aircraft Carrier WL
300031215€34.99
Article number: 300031215 Product: 1:700 Jap. Shinano Aircraft Carrier Waterline In October 1944, the Shinano was launched, one of the largest aircraft carriers of World War II. The construction of the giant Yamato-class ship began shortly after the Japanese defeat at Midway and was completed in November 1944. The total length of the Shinano was 266 meters, the carrier had a displacement of 62,000 tons. From the Yamato the Shinano inherited the strong armor as well as a reinforced flight deck that could withstand a direct explosion of a 500 kg bomb. Before its first deployment – on the way to an equipment quay – the vessel was discovered and torpedoed by an American submarine. Shortly afterwards the Shinano capsized near the shores of Shionomisaki. The Shinano is still the largest warship sunk by a submarine.
On-road RC cars (2WD/4WD)
Audi A4 quattro Touring TT01E
300047414€149.99
Article number: 300047414 Product: Audi A4 quattro Touring TT01E • This is a 1/10 scale R/C model assembly kit. Length: 454mm, width: 186mm. • The Audi A4 form is captured accurately in polycarbonate. • Separate molded parts recreate side mirrors and sporty rear wing. • Stickers are included to recreate markings for both no.5 and no.45 cars (they raced in different touring car series), with masking stickers to help during the paint job. • 18-spoke wheels are molded in Silver, and paired with slick tires. • The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis. Warning! Not suitable for children under 14 years.
Model car kits 1:24
Carbon Decal Plain EF
300012680€8.19
Article number: 300012680 Product: Carbon Decal Plain EF Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon look, 1/6th, 1/12th and 1/24th scale carbon Structure smooth/extra fine, 130x 190mm sheet size, instructions.
Model car kits 1:24
Carbon Decal Twill F
300012681€8.19
Article number: 300012681 Product: Carbon Decal Twill F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon optics, 1:6, 1:12 and 1:24 scale, carbon structure twill/fine, 130x190mm sheet size, instructions.
Bundle - 21 %
On-road RC cars (2WD/4WD)
Tamiya RC Honda Bundle
BDL-300047506€253.47
Product bundle consisting of: 1:10 RC Honda NSX Racing Whi PB TT-02 / Tuning set TT-02 / 1:10 wheel set 14 Sp.Design (4) black Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories. Article number: 500908234 Product: Tuning set TT-02 Tuning set for TAMIYA Chassis. Please note! ATTENTION: Use the Motor pinion (25T) only in Connection with the gear (68T). Mount the Motor into its Support on the position "H" for 23 t. Included: Pinion Gear (25T), TT-02 Speed gear set (68T), Oil shock absorber set short (4), Ball bearing set (16) Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1/12 Kawasaki Ninja H2R
300014131€58.99
Article number: 300014131 Product: 1:12 Kawasaki NINJA H2R This 1/12 scale assembly model kit recreates Kawasaki's hyper-powerful Ninja H2R bike, a track-only monster that the famed Japanese manufacturer announced in 2015. The Ninja H2R was developed with input from many of the companies in the larger Kawasaki Heavy Industry group, and its name is a composite of two legendary Kawasaki bikes: the famed Ninja and the H2R. The Ninja H2R not only looks the part with a combination of bare carbon fiber and exquisite mirrored finish black chrome parts, it also has mind-blowing specs. It generates a hair-raising 300hp-plus from its supercharged 998cc inline-4, which it translates into other-worldly acceleration. It is also chock-full of up-to-date electronics for the track: traction control, engine brake control and more. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1/12 Repsol Honda RC213V '14
300014130€57.99
Article number: 300014130 Product: 1/12 Repsol Honda RC213V '14 This model depicts the RC213V run by the factory-works Repsol Honda team in 2014 MotoGP. It was a momentous season for the team and for young sensation Marc Marquez. Marquez's 2014 season was sublime as he absolutely dominated with 13 wins and contributed to the Riders', Constructors' and Team Championships. The RC213V debuted in 2012 with new engine size regulations stipulating a maximum of 1,000cc. It features an aluminum double-tube frame and powerful 1,000cc Honda 4-stroke V4 with pneumatic valve system. The seamless transmission saves valuable power during shifts, while other hi-tech features include traction control, an anti-wheelie system, and engine braking control. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1/24 Mazda MX-5
300024342€47.99
Article number: 300024342 Product: 1/24 Mazda MX-5 2015 saw the debut of the 4th generation Mazda Roadster (MX-5), the iconic car with a heritage dating back to 1989. This dynamic lightweight car was made to amplify the thrill of driving, with a punchy 1.5-liter (2.0-liter in North America) engine and 6-speed transmission, while including modern must-haves such as advanced safety equipment. Tamiya has faithfully captured the NEW roadster in 1/24 scale! Details include; option to choose left or right hand drive, soft top in folded position and highly detailed interior. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1/24 Mercedes-AMG GT3
300024345€64.99
Article number: 300024345 Product: 1:24 Mercedes-AMG GT3 #1 This scale model assembly kit recreates the 2016 Mercedes-AMG GT3 race car. It is a GT3 class spec customer sports car that was converted from the AMG GT road car by the Mercedes-AMG high performance division. The full-size racer features a reliable and powerful 6.3-liter naturally aspirated V8 engine harnessing 558hp. Its carbon fiber body overhauls the road car version and has a prominent grille inspired by the classic 300 SL. The race car is also fitted with racing essentials such as a large rear wing, air intakes, splitter, canards and diffusers contributing to its aerodynamics. All of these details are expertly detailed in the model kit to give the modeler the most accurate parts to finish the model. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1/24 TOYOTA GR Supra
300024351€44.99
Article number: 300024351 Product: 1:24 TOYOTA GR Supra The latest addition to the long-running 1/24 Sports Car Series is a stunner – Toyota’s brand new GR Supra, which joins its R/C cousin (Item 58674) in the Tamiya catalog. Upon its global announcement in January 2019, the TOYOTA GR Supra created a worldwide buzz. Designed with beautiful balance, it provides superlative handling and stable corners, while the sensuous long nose, short deck form has a striking double-bubble roof. Combined with impeccable power from a turbocharged inline-six or inline-four engine, the GR Supra is set to define the next generation of performance. • This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. • The dynamic lines of the body are rendered with stunning accuracy. Bumper, A pillar, front grille and other parts are molded separately for a sharp finish. • Features console and dashboard, and seats with separate headrest components. • Can be assembled as Japan, U.S. or Europe spec, with dedicated left- and right-hand drive part positions. • A detailed underside shows off the exhaust system, plus multi-part front and rear suspension. • Features the 19-inch wheels exclusive to the top grade RZ car in Japan. They are two-part designs with separate metal-plated and black components. Tires have realistic tread. • Includes metal transfers, plus masking stickers for window areas.
Military model vehicles 1:35
1/35 Ger. Panther Ausf.D
300035345€59.99
Article number: 300035345 Procuct: 1/35 Ger. Panther Ausf.D The latest addition to the 1/35 Military Miniature Series depicts the German Panther, a WWII AFV developed by Germany to combat the mighty Russian T-34. Given the importance of stopping the T-34 as the Russians turned the tide in WWII, the Panther was a priority and this was emphasized by armored warfare guru Heinz Guderian's role in the design process. The Panther packed a powerful L/70 7.5cm gun (rumored to have taken out a T-34 at 3km) and combined it with excellent mobility and a 55km/h top speed. Just as importantly, it made great use of T-34-inspired sloped armor, up to 80mm in places. As things turned out, development of the Panther was rushed as the German situation worsened, and this led to severe reliability problems in engagements such as the Battle of Kursk in July 1943. Despite that, it proved offensively and defensively highly capable. The Ausf.D was the initial variant of the Panther; 842 were manufactured between January and September 1943. About the Model • This is a 1/35 scale plastic model assembly kit. • This completely newly-tooled kit captures the form of the Panther Ausf.D with sloped armor, and long 7.5cm gun. Tamiya designers studied a real Panther in the Netherlands to ensure stunning accuracy. • Ausf.D-specific features such as smoke dischargers and rear panel layout are authentically depicted. • Advanced slide molding techniques ensure that turret details are accurately rendered. • Belt type tracks give an effective finish and make for a smooth assembly process. • Commander torso figure plus full body crew figure included. 3 marking options include Battle of Kursk unit. • Three detail-up parts sets are available to further enhance the realism of your model. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1/35 Hummel Metal Gun Barrel
300012688€12.79
Article number: 300012688 Product: 1/35 Hummel Metal Gun Barrel ★Add even more detail to your 1/35 scale model of the German Self-Propelled Howitzer Hummel (Late Production) with this piece! ★The barrel is made from turned aluminum, and even features fine rifling detail at the tip.
Military model vehicles 1:35
1/35 Valentine Mk.II/IV
300035352€49.99
Article number: 300035352 Product: 1:35 Brit. Valentine Mk. II/IV This is an all new tooled model of the British Valentine Infantry tank in 1/35 scale. British armor doctrine in the 1930s up to the outbreak of WWII called for 2 types of tank - more mobile cruiser tanks and heavy, slow infantry tanks. The Valentine was a prolifically produced example of the latter (7,315 units, more than 30% of British tank production in WWII). It was based upon existing cruiser tank designs and relatively easy to manufacture, a critical point for the British military after it had lost so much material during the Dunkirk evacuation in 1940. The Valentine would see extensive action in North Africa, particularly the Mk.II and Mk.IV variants (they had different engines) depicted by this kit. Over 4,500 were also handed over to the Soviet Union under the lend-lease agreement, the Red Army using them mainly for recon work. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 Citroen DS Blue PB MB-01
300047502€174.99
Article number: 300047502 Product: 1:10 RC Citroen DS MB-01 Blau Lack. Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better known cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Alfa Rom. Giulia Club Pai. MB-01
300047501€174.99
Article number: 300047501 Product: 1:10 RC Alfa Rom. Giulia Club lack.MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.
On-road RC cars (2WD/4WD)
1:10 RC Audi 90 quattro Racing TT-02
300058744€169.99
This is another 1/10 R/C model assembly kit based on our popular TT-02 chassis! The Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than on the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX) 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Fiat 131 Abarth Olio Fiat MF-01X
300058723€184.99
Article number: 300058723 Product: 1:10 RC Fiat 131 Abarth Olio Fiat MF-01X Tamiya welcomes the Fiat 131 Abarth Rally Olio Fiat as another 1/10 R/C rally car based on the MF-01X chassis. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori made its debut in 1976, and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Fiat Abarth 1000TCR MB-01 paint.
300047492€169.99
Article number: 300047492 Product: 1:10 RC Fiat Abarth 1000TCR MB-01 Lack. Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The body is pre-painted.The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, pre-painted polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Ford Mustang GT4 (TT-02)
300058664€154.99
Article number: 30058664 Product: 1:10 RC Ford Mustang GT4 (TT-02) Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun to drive – a great choice to get started with R/C touring cars! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 459mm. • The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate. • Wheel arches are pre-cut out for a simpler body assembly experience. • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis. • Separately molded plastic components depict rear wing and side mirrors. • Racy 10-spoke wheels are molded in gun metal and paired with slick tires. • Stickers are included to create an original livery, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.
On-road RC cars (2WD/4WD)
1:10 RC MB CLK AMG 2002 TT-02
300058722€154.99
Article number: 300058722 Product: 1:10 RC MB CLK AMG 2002 TT-02 Tamiya is proud to announce the release of the 2002 Mercedes-Benz CLK AMG Racing Version as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The streamlined 2-door coupe Mercedes-Benz CLK had a version with a 4-liter V8 engine capable of 470hp, that was a base for a racecar. It had enlarged front and rear fenders to mount thick tires, and its side sill spoilers and rear wing ensured improved aerodynamics. In the 2002 German Touring Car Masters, the racecar secured the Teams’ Championship. This kit recreates homologation version which inherits the racecar's powerful form with enlarged over fenders and rear wing, without sponsor logos. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC MB CLK-GT-R 1997 TC-01
300058731€274.99
Article number: 300058731 Product: 1:10 RC MB CLK-GT-R 1997 TC-01 Tamiya is delighted to announce that the 1997 Mercedes-Benz CLK-GTR is now paired with the TC-01 chassis. (Item 47437 uses the TT-01 Type-E chassis.) The Mercedes-Benz CLK-GTR car took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, it was actually vastly different. It used a carbon composite monocoque frame with roll cage, a rear 6-liter V12 engine capable of over 600hp, and 6-speed sequential transmission. Its 4-wheel double wishbone suspension featured front and rear pull-rod setups. In the same year, this car took both Manufacturer’s and Driver’s Championships. 4WD assembly kit, TC-01 Chassis, Mercedes Benz CLK-GTR Boddy, 540 Motor, assembly guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC McLaren Senna TT-02
300058711€159.99
Article number: 300058711 Product: 1:10 RC McLaren Senna TT-02 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the McLaren Senna which has already been released as Item 24355 in the 1/24 Sports Car series! Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD
300047484€164.99
Article number: 300047484 Product: 1:10 RC Mercedes-Benz C11 1990 Gr.C 2WD Tamiya welcomes back the 1/10 R/C 1990 Mercedes-Benz C 11 which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R/C fans. Enjoy running this model with various kinds of chassis setup! WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Racing Fighter (DT-03) The Real
300058628€104.99
Article number: 300058628 Product: 1:10 RC Racing Fighter (DT-03) The Real Say hello to the new model on Tamiya's easy-to-assemble, rough and tumble DT-03 buggy chassis! It features a brand new polycarbonate body design with attractive, boxy lines and a stylish rear wing. Customers outside of Japan will be delighted to hear that the export version of this kit exclusively features a torque-tuned motor and CVA oil dampers. About the Model • This is a 1/10 scale R/C model assembly kit. • Features a stylish new body molded in durable and lightweight polycarbonate. Brand new stickers are included to decorate the model. • The DT-03 uses a tough monocoque frame. Big wheelbase (288mm) and tread (front: 221mm, rear: 208mm) measurements give it great performance off-road! • Front arms are at a 25-degree angle for great off-road driving. Dampers are high-performance CVA oil shocks. • A torque-tuned motor is included in the export version ONLY. • Features a sealed rear gearbox with internal gear differential unit, plus a dust cover for R/C equipment. • A wide range of option parts is available to tune and customize your DT-03 chassis car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Lightweight kit with detailed and illustrated assembly instructions, motor, controller Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:10 RC Squash Van 4WD GF-02
300058725€199.99
Article number: 300058725 Product: 1:10 RC Squash Van 4WD GF-02 Tamiya is delighted to announce a new off-road car featuring big tires; the name is the Squash Van, and it is paired with a new gear-driven 4WD GF-02 chassis. While the GF-01 chassis features a comical design, the GF-02 chassis employs a more realistic wheelbase and a frame with ladder / pipe motifs. This R/C assembly kit is inspired by 1950s American panel vans, and offers an excellent drive even on grass or uneven surfaces. The gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensures stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods. 4WD assembly kit, GF-02 Chassis, ESC included, Type 540 Motor, Clear polycarbonate Body,user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
- 22 %
Off-road RC cars
1:10 RC Super Clod Buster Black Edition
300047432€344.99
Article number: 300047432 Product: 1:10 RC Super Clod Buster Black Edition • This is a 1/10 scale R/C model assembly kit. Length: 480mm, width: 380mm, height: 340mm. • The stylish monster truck body is injection molded in black plastic, with great detail and realism. Metalplated parts are included to depict front grille, supercharger air intakes and roll bars. • Plastic bumper and damper components are red, giving a colorful accent. • The model is based around a bathtub chassis frame, endowed with rigid link suspension and two springs on each wheel that realize ground clearance of 55mm and a superb off-road drive. • Four-wheel steering ensures that the model has excellent handling. • Two Type 540 motors and the dedicated twin motor TEU106BK ESC give ample power via front and rear differential gears. • Stickers are a brand new design for this model. 4WD Monstertruck, assembly Kit, 2 motors, 4-Wheel steering, ABS Body (black), incl. ESC, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC The Grasshopper II (2017)
300058643€119.99
Article number: 300058643 Product: 1:10 RC The Grasshopper II (2017) The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model. About the Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC The Hornet 2004 2WD Buggy LWA
300058336€134.99
Article number: 300058336 Product: 1:10 RC The Hornet 2004 2WD Buggy LWA About the model: - Length: 400mm, width: 230mm, height: 150mm. Weight: 874g - Solid bathtub frame with side bumpers - High performance Type 540 motor - Independent swing axle front suspension with friction dampers -Rolling rigid axle rear suspension with oil filled dampers - Sealed rear gearbox to protect diff gear during off-road running -Original 3-piece assembly wheels compatible with optional ball bearings (sold separately) - Straight ribbed racing front tires - Spiked buggy rear tires - Durable, shock absorbent polycarbonate body shell - Reinforced resin bumper - TEU-101BK Electronic Speed Controller
Off-road RC cars
1:10 RC Toyota Land Cruiser 40 CC-02
300058715€264.99
Article number: 300058715 Product: 1:10 RC Toyota Land Cruiser 40 CC-02 Tamiya is delighted to announce the release of the Toyota Land Cruiser 40 as our new R/C model on the cross country CC-02 chassis. The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. The long-selling Land Cruiser 40 series was sold from 1960 to 1984, and employed front / rear rigid axles with leaf springs, and durable ladder frame. This R/C model assembly kit recreates the 1972 Land Cruiser FJ40V which is one of the most popular cars in that series. Included: 4WD assembly Kit, CC-02 Chassis, User Guide, ESC included, Polycarbonat Body, Type 540 Motor, oil filled Damper, ladder frame chassis WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Toyota Supra (JZA80) BT-01 2WD
300058733€154.99
Article number: 300058733 Product: 1:10 RC Toyota Supra (JZA80) BT-01 2WD The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. (Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TT-02R Chassis Kit
300047326€199.99
Article number: 300047326 Product: 1:10 RC TT-02R Chassis Kit This chassis kit gets a further limited edition re-issue - the latest production was in 2022. This refined, race spec TT-02 chassis has a wide range of option parts and components to allow you to compete at the front of the race! Included: 4WD assembly Kit, TT-02 Chassis, R Version with Tuning Parts, fully ball bearings, blue anodized parts WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC VW Beetle Rally (MF-01X)
300058650€174.99
Article number: 300058650 Product: 1:10 RC VW Beetle Rally (MF-01X) This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. What better chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt? About the Model • This is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm. • The model uses the 239mm L wheelbase. • The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts. • Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Off-road RC cars
1:10 RC Wild Willy 2000 (WR-02)
300058242€199.99
Article number: 300058242 Product: 1:10 RC Wild Willy 2000 (WR-02) The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar. WR-02 Chassis: The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly. Requires: 2-channel radio, 7.2 volt battery & charger, and Tamiya TS paint Scope of delivery: Kit including electronic speed controller as well as detailed and illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC XV-01 Lancia Delta HF Integrale
300058569€284.99
Article number: 300058569 Product: 1:10 RC XV-01 Lancia Delta HF Integrale The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s. About the Model • This is a 1/10 scale R/C assembly kit. • The body is recreated faithfully in polycarbonate. • The XV-01 chassis features front-motor belt-driven 4WD. • Metal-plated side mirrors and grille come as separate parts. • The car is appropriately fitted with Rally Block tires, on white wheels. • Type 540 Motor included. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:10 RC XV-02 PRO Chassis Kit
300058707€374.99
Article number: 300058707 Product: 1:10 RC XV-02 PRO Chassis Kit Tamiya is proud to announce this shaft-driven 4WD chassis kit for rally cars, an addition to the XV chassis series that will be a popular addition to the R/C rally series. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Model aircraft kits 1:72
1:100 Space Shuttle Atlantis
300060402€66.99
Article number: 300060402 Product: 1/100 Space Shuttle Atlantis NASA's space shuttle was first launched on April 12, 1981 and the fleet has accomplished numerous historic missions throughout their 30 years of service. The spacecraft conducted the latest research and played an important role in building the largest structure in space thus far, the International Space Station. The final space shuttle mission ended on July 21, 2011 with the flight of the Atlantis and the shuttle fleet is now destined for public display in museums across the United States. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Ducati 916 Desmo. 1993
300014068€35.99
Article number: 300014068 Product: 1:12 Ducati 916 Desmo. 1993 About the Ducati 916 Ducati, the renowned Italian motorcycle manufacturer, is highly regarded by motorcycle enthusiasts the world over. Their current top-of-the-line "916" bike was unveiled to the public during the 1993 Milan Motor Show. In recent years, Ducati has been a dominant force at the World Superbike Championships. Their 916 was developed using the latest racing technology and expertise, and became a very effective base machine fore these Championships. Its 114 horsepower, 916cc, liquid cooled L-twin cylinder engine uses a computer controlled fuel injection system and Ducat's traditional Desmodromic valve operation system. This valve system uses cam mechanics for both opening and closing the valves, while a conventional system closes the valves with springs only. This powerful engine is mounted in a light weight and extremely rigid, chrome molybdenum steel tubular frame. The rear swing arm suspension uses a mono-arm for quick tire changing during competition. Showa's shock absorbers and Brembo brake calipers are used at both ends. The 916 has a 2-stage adjustable caster offset system. Its aerodynamic cowl design is very distinctive, differing from other racer-replica bikes. The front cowl has engine air intake openings and mounts the dual headlamps. The fuel tank is ergonomically sculptured to fit the rider's varying posture during hard riding. The 916 is a true street legal racing machine on the leading edge of performance and styling. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Front Fork Yamaha YZF-R1M
300012684€29.99
Article number: 300012684 Product: 1:12 Front Fork Yamaha YZF-R1M Add an even deeper layer of realism to your 1/12 scale model of the YZF-R1M using this detail-up parts set depicting the bike's font fork! Metal and plastic parts are included to replace kit standard parts and provide an ultra-realistic finish to the model. • The set provides numerous individual parts including inner and outer tubes, plus parts depicting smaller pieces of the fork such as connectors and end caps. • Dedicated metal parts include reservoir tank, outer tubes, gold color fork tops and more. • Damper spring is given a realistic yellow painted finish (kit part is black). Front Fork Kit model, scale 1:12, Aluminum immersion tube and com- pensating holder anodized, mounting material, Instructions, Suitable for 300014133.
Model motorcycle kits 1:12
1:12 Honda RC166 GP Racer 1960
300014113€89.99
Article number: 300014113 Product: 1/12 Honda RC166 GP Racer 1960 The Honda RC166 is known for its excellent top speeds and features a 6-cylinder engine with six exhaust pipes. The bike was made famous by motor sports legend Mike "The Bike" Hailwood, who raced the RC166 to 10 victories and a world championship title. His infamous bike is reproduced as a model and features red and silver FRP cowling, large diameter drum brakes and silver spoke wheels. . Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Honda VFR 750R 1987
300014057€30.99
Article number: 300014057 Product 1:12 Honda VFR 750R 1987 About the Honda VFR750R Honda's release of their limited production, road-going, "works racer" VFR750R made headlines in the motorcycle scene in 1987. The VFR750R is a street-legal counterpart of the formidable RVF750 endurance racer which displayed remarkable potential in the world endurance championships. This bike follows the concept seen in the RVF750, including the use of space-age technology and components such as titanium, carbon-fiber, kevlar, and magnesium. It betters the earlier bikes by a wide margin. The VFR750R also uses a twin-spar aluminum box frame, Pro-Arm (rear swing arm), and a center-lock hub rear wheel. These superlative features and the RVF's racing reputation have made it a collector's item even before the first unit was off the production line. The 748cc, liquid cooled, V4 cylinder 16 valve engine has been kept compact to keep the VFR's overall dimensions very close to the current 500cc Grand Prix racers, for a minimum frontal area. Further, this motorcycle departs from the typical Japanese mass-production practice by using a great deal of human labor on each unit, such as the FRP cowling and windscreen being laid up by hand. The Honda VFR750R is one potent package and has been designed to be very competitive on racing tracks in stock form, yet remain street legal. It will remain a desirable and elusive high performance bike for years to come. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Kawasaki Ninja ZX-12R Street 1999
300014084€42.99
About the Kawasaki Ninja ZX-12R Kawasaki's legacy of cutting-edge sportbikes has inspired motorcycle fans for generations. Recently, the call for 300km/h plus super sports bikes has motivated several manufactures to bring out powerful contenders. Kawasaki answered the call at the 1999 Paris Motorcycle Show, with the impressive debut of their all-new Ninja ZX-12R. This Ninja was reportedly created in the image of a fighter plane, which comes as no surprise considering that its slippery aerodynamics involved the cooperation of the Aerospace Division of Kawasaki Heavy Industries, Ltd. In fact, the ZX-12R spent more time in the wind tunnel during its development phase than any motorcycle in Kawasaki's history. The results are evident: small winglets on the sides of the fairing separate airflow around the bike; small wind deflectors on the lower forks deflect turbulent air from the engine; a long lip on the edge of the fairing further smoothens out airflow. Also, projecting just ahead of the front fairing, a large scoop takes advantage of higher air pressure, heightening intake efficiency. A monocoque frame backbone creates an airbox that allows air to pass through the inside of the bike for cooling in addition to ensuring overall rigidity. The powerplant of the Ninja ZX-12R is a fuel injected 4-cylinder 1,199cc engine that pumps out an abundant 178hp. Its four-into-two-into-one exhaust system features a titanium muffler paired with a catalyzer, which helps eliminate unburned hydrocarbons for cleaner emissions. Kawasaki brilliantly raised the superbike standard in performance, power and aerodynamics with their series flagship, the Ninja ZX-12R.
Model motorcycle kits 1:12
1:12 Suzuki GSX1100 Katana Cust.Tuned
300014065€28.49
Article number: 300014065 Product: 1:12 Suzuki GSX1100 Katana Cust.Tuned Making its sensational debut at the 1980 Cologne Motor Show, the Suzuki GSX1100S Katana came with special parts and a customized finish which has been accurately portrayed by this plastic assembly model kit. ★The air-cooled 4-cylinder DOHC engine and its cooling fins have a precisely reproduced finish. ★Engine parts including the front mounted oil cooler and the Katana's exhaust are included in the set and provide the model with greater realism. ★Custom parts including the front and rear brakes, large diameter front rotor with 4-pod calipers, and small diameter rear floating calipers are realistically reproduced to help capture the ever lasting presence of the Katana. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Yamaha XV1000 Virago
300014044€24.49
Article number: 300014044 Product: 1:12 Yamaha XV1000 Virago About the Yamaha XV1000 Virago The motorcycle, along with the automobile, has played a big role in transporting humans from place to place for many years. Man has always been able to adapt his tools for specific needs, and as the motorcycle became more and more a sport, or leisure transportation vehicle, it has been designed for more specific purposes. The off road, touring, motocross and speed bikes as well as the basic transportation motorcycle can be seen in most countries, but America seems to have a certain styling all its own. This so called "Chopper style" came about during the mid 1960's from the many modified Harley's done by members of the many motorcycle clubs around the country. There are many long straight stretches of good, high speed roadways in America, and to sit back comfortably, with feet resting on forward pedals and sitting on a very relaxing saddle, brought about these modifications. The Yamaha Company of Japan is well known for quality bikes around the world, and they have been making bikes for specific areas for years. The Yamaha XS650 Special released in 1978 had the American look, and since then this company has marketed bikes with similar styling. The XV1000 Virago is their latest, large bore, American styled motorcycle and sure to become popular. Its front wheel caster angle of 32 degrees provides an extended wheel base of 1525mm, making its straight running ability superb. The wide, pull back type of handle bars and the forward placed foot rests, allow the rider to sit up as if he was on a horse. A separate looking, loose cushion seat is almost like sitting on a sofa, and it is positioned at a height of only 715mm. The 70hp 981cc twin cylinder is in the "V" format and transmits its power via an enclosed drive shaft for quiet, maintenance free operation. The bike comes with much chrome and lots of gold plating, but it is done in such a manner that the bike does not look gaudy. It is a luxurious and comfortable Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC EU Truck Scania R470 Highlin Kit
300056318€399.99
Article number: 300056318 Product: 1/14 RC EU Truck Scania R470 Highline Kit It has been a long time in coming, but Tamiya has heard the demand from fans around the world and is now proud to present award-winning truck maker Scania's state-of-the-art R470 Highline as the newest addition to our unique 1/14 scale R/C tractor truck series. Swedish manufacturer Scania has a long history of producing exceptional trucks designed for long-haul transport. The company's R-series made its debut in 2004 and quickly built a highly favorable reputation that led to it being given the prestigious International Truck of the Year award in 2005. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC MB Actros 3363 GigaSpace 6x4
300056348€529.99
Article number: 300056348 Product: 1:14 RC MB Actros 3363 GigaSpace 6x4 This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons! The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter. The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length! Scope of delivery: Kit Mercedes-Benz Actros 3363 6x4 with detailed and illustrated assembly instructions. Suitable LEDs (3mm white) for lamp brackets: Above: 1x 307175097 (2) + 3x 307175099 (1) Below: 2x 307175097 (2) Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Scania 770 S 4x2
300056379€489.99
Following Item 56368 (1/14 R/C Scania 770S 6x4) and Item 56371 (1/14 R/C Scania 770S 8x4/4), Tamiya welcomes the Scania 770 S 4x2 to 1/14 Tractor Truck Series. The Scania 770 S 4x2 is a single front steering, single rear-axle drive four-wheel heavy trailer head equipped with a 16.4-liter V8 turbo engine capable of 770hp, added in 2020 to the Swedish manufacturer Scania’s top-grade S Series. The 4x2 trailer heads are versatile, and are a very popular type of trucks in our line-up. This kit also has accessory parts to recreate a customized version like those which are trendy in Europe. Assembly Kit of Scania 770S, 1/14th scale, Aerodynamic Package, Driver Figure, Aluminium Frame, Manual included. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Scania 770S 6x4 Silver pre-pain.
300056373€589.99
Article number: 300056373 Product: 1:14 RC Scania 770S 6x4 Silver pre-pain. Tamiya welcomes a new addition to 1/14 Tractor Truck Series – this time, the Scania 770 S 6x4 produced by the Swedish manufacturer Scania. The Scania 770 S 6x4 is one of the trailer heads in the Scania’s top-grade S Series – which had undergone a full model change in 2016. This trailer head features a double rear-axle drive 6x4 chassis equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp which was the most powerful in the industry as of 2020. SCANIA 770S 6x4 Model kit, ABS injection moulded body w/ Aero-pack, Aluminum Ladderframe, 2-axles (driven), 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotor Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Military figures 1:16
1:16 Figure General Rommel Africa
300036305€19.49
Article number: 300036305 Product: 1:16 Figure General Rommel Africa This is a 1/16 scale plastic figure assembly kit depicting the "Desert Fox" - German WWII commander Feldmarschall Rommel. ★The figure is depicted in the uniform worn while Rommel was active in fighting in North Africa, with separate parts for collar and medals. ★Goggles are captured realistically using clear parts. Warning! Not suitable for children under 14 years.
Military figures 1:16
1:16 Figure Ger. Infantry Man
300036303€18.99
Article number: 300036303 Product: 1:16 Figure Ger. Infantry Man This is a 1/16 scale plastic figure assembly kit depicting a WWII German infantryman in late-war camouflage. ★The infantryman is captured in action pose, aiming his MP40 with elongated stock. ★Separate parts are also included for various accessories such as ammo and gas mask cases, grenade, shovel and more. Warning! Not suitable for children under 14 years.
Military figures 1:16
1:16 WWII Figure Ger.Infantry Man Winter
300036304€19.49
Article number: 300036304 Product: 1:16 WWII Figure Ger.Infantry Man Winter This is a 1/16 scale plastic figure assembly kit recreating a WWII German infantryman in reversible winter uniform. ★He is depicted in realistic pose with MP44 assault rifle in hand. ★Realistic facial expression and creases in clothing ensure a highly detailed finish. ★Depictions of ammo box, shovel, gas mask case and other accessories add a final accent to the model. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Calsonic Skyline GT-R (R34)
300024219€28.99
Article number: 300024219 Product: 1:24 Calsonic Skyline GT-R (R34) The unrivaled Nissan Skyline GT-R of the 1970's Japanese touring car races valiantly returned to the race circuit in 1990. Equipped with 2.6l, inline 6-cylinder twin turbo engines, two R32 Skyline GT-R's brilliantly triumphed in all six races. Particularly impressive was the bright blue Calsonic Skyline, which achieved five of the six victories to take the series championship. In 1993, the Calsonic Skyline was converted into a GT machine and brought out for the All Japan GT Championships, where it took top honors for three years running. From the middle of the 1995 season, the R33 version of the Skyline GT-R was brought out. The R33 was based on the 4WD production car, but was instead equipped with rear wheel drive. For the 1999 All Japan GT Championships, Nissan brought out a new machine, the R34. Compared to its predecessor, the R33, the R34 was constructed more compactly, with a narrow wheelbase. It was developed to take advantage of the reinforced chassis used on the production model brought out in January of that year. Except for the roof, the body was completely remade in carbon fiber and equipped with a large, curved wing on the rear- just one example of its aerodynamic and stylish form. Undergoing constant improvements since 1990, the inline, 6-cylinder DOHC twin turbo engine of the R34 is maximized with a 6-speed sequential transmission and rear wheel drive. The latest incarnation of the Skyline GT-R, the R34, promises to add more GT Championship Titles to Nissan's illustrious racing history. Calsonic GT-R (R34)
Model car kits 1:24
1:24 Figure-Set Rally Mechanics (5) w/A.
300024266€24.99
Article number: 300024266 Product: 1/24 Figure-Set Rally Mechanics (5) w/A. - Five Figures - Jack and stand, slope board, tool box, part box and more - Multiple team markings Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Honda S2000
300024245€31.49
Article number: 300024245 Product: 1/24 Honda S2000 Honda's first passenger production car, the S500 open two seater sportscar, was first announced in the 1962 Tokyo Motor Show, going on sale the following year. After the production termination of its successor, the S800, Honda moved away from producing front-engine/rear-wheel drive sports cars. September of 1998 saw the sensational rebirth of this type, with the announcement of the S2000. This open two seater features the traditional sports car look with a puposeful long nose/short deck styling. Futuristic headlights wrap around the side, appearing to be pulled back, poised for speed. The naturally aspirated 2.0 liter inline-4 DOHC-VTEC powerplant pumps out over 250hp, yet still manages to reduce toxic exhaust emissions to 1/10th the level of its predecessors. The positioning of the engine is also ideal, sitting just behind the front wheel axle in interest of 50/50 weight distribution. The sturdy body and superior road handling, meshed with a four-wheel double wishbone suspension and a newly developed 6-speed manual transmission, offer high tractability and synthesis between car and driver. The inside of the cabin features bucket seats, state of the art digital indicators, and a red button for starting the engine. Of course, the impact safe design, air bag, and all the other safety features of modern sports cars have also been thoroughly considered. Developed in celebration of Honda's 50th anniversary, the S2000 will surely take it place as the 2000cc sports car to beat in the 21st century. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 NISMO Skyline GT-R Z-tune (R34)
300024282€38.49
Article number: 300024282 Product: 1/24 NISMO Skyline GT-R Z-tune (R34) Tamiya has created an all-new mold to produce the body for this 1/24 scale NISMO GT-R Ztune. JGTC Champion team NISMO has turned its skills towards producing the ultimate road car, and we thought it was only right to do it justice with a truly excellent model. About the GT-R Z-tune The NISMO team took a Nissan Skyline GT-R (R34) base and hand-built it into a totally customized supercar. The resulting GT-R Z-tune made a huge splash during its unveiling at the 2005 Tokyo Auto Salon. Upgrades to internal mechanics include the souped-up 2.8L twin turbo engine with 500hp output, Sachs special suspension system and brakes jointly designed with engineers from Brembo. The lightweight carbon body features front bumper spoiler, hood with louver, side skirt and rear underspoiler. Full of racing-spec parts while featuring excellent power and handling, NISMOs Z-tune has been called the ultimate road-going car, combining luxury with superior performance. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Subaru Impreza WRC '99
300024218€27.99
Article number: 300024218 Product: 1:24 Subaru Impreza WRC '99 The 1997 World Rally Championships saw a relaxing in the rules pertaining to vehicle modification. Subaru was the first team to take advantage of the leeway, bringing out the Impreza WRC. That machine featured all aluminum horizontal four cylinder turbo engine paired with a vertically mounted gearbox. The layout placed the gearbox in a balanced position behind the front axle, heightening manerverability and ultimately contributing to a Mnufactures Championship for that year. The bulk of the improvements to the 1999 model centered around the engine and gearbox. Foremost was the adoption of an electronically controlled throttle system. This system converts the position of the throttle in to electronic signals, heightening throttle response. The Impreza WRC was also equipped with a 6-speed, semi-automatic gearbox. This system enables sudden shifting, such as from 6th to 1st gear. Work is also continuing on the development of an electronically controlled damper system. The Impreza WRC is driven by J. Kankkunen, R. Burns and B. Thiry. Kankkunen and Burns finished in 1st and 2nd place respectively at both the 7th Argentina Rally and the 10th Finland Rally. The 8th Acropolis Rally was also taken by Burns, setting the scene for an intense contest in the latter half of the season.
Model car kits 1:24
1:24 Toyota G.R. TS050 HYBRID
300024349€58.99
Article number: 300024349 Product: 1:24 Toyota G.R. TS050 HYBRID 2018 was a truly landmark year for TOYOTA GAZOO Racing and their TS050 Hybrid car, which made a huge splash in the racing world thanks to a refined design with great aerodynamics and a hybrid powertrain pairing a 2.4-liter engine and lithium-ion battery. Now, following on from Mini 4WD and R/C models, the car is a welcome addition to the impressive stable of racing cars in the Tamiya 1/24 Sports Car Series.
Model car kits 1:24
1:24 Toyota GT86
300024323€49.99
Article number: 300024323 Product: 1:24 Toyota GT86 About the Model ★Length: 177mm, Width: 84mm ★Dynamic body lines of the FR sports car are accurately reproduced. ★Hood may be posed open to showcase the detailed engine compartment with boxer engine. ★Front wheels are linked with steering wheel. ★Manufacturer emblems and mirror surfaces depicted with metal transfers. ★Underbody features suspension and drivetrain details. ★Metal-plated headlight and taillight fixtures add an eye-catching touch.
Model car kits 1:24
1:24 Volkswagen Beetle 1300 1966
300024136€27.99
Article number: 300024136 Product: 1:24 Volkswagen Beetle 1300 1966 Even in this age of sophistication, the popularity of the Volkswagen "Beetle" has not diminished. The original design dates back to the 1930"s when Dr. Ferdinand Porsche provided the design framework for the "People"s Car." Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen"s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector"s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come. Volkswagen 1300 Beetle Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Alum. Gun Barrel Jagdpanzer IV/70 L
300012660€17.79
Article number: 300012660 Product: 1/35 Alum. Gun Barrel Jagdpanzer IV/70 L This detail-up part set is available to add a higher level of realism to Item 35340 1/35 German Jagdpanzer IV /70(V) Lang. The high-precision metal parts in this set recreate barrel and breech parts of the Lang's impressive 70-caliber 7.5cm main gun. •Precise recreation of the 7.5cm gun barrel in aluminum gives a sharp finish, and eliminates the need for removal of parting lines which arises when using resin plastic parts. •Features separate metal parts recreating gun breech, operating wheel, equilibrators and more. •Equilibrators are moving parts with built in poly caps. They allow elevation and depression of the gun barrel. •For use with Item 35340 1/35 German Jagdpanzer IV /70(V) Lang.
Military model vehicles 1:35
1:35 Brit. Tank Churchill Mk.VII (6)
300035210€39.99
Article number: 300035210 Product: 1:35 Brit. Tank Churchill Mk.VII (6) This is a 1/35 scale plastic assembly kit model of the British Infantry Tank Mk.IV Churchill Mk.VIII. Introduced at the end of 1943, the tank demonstrated its worth during the Normandy invasion while supporting Allied infantry units. The traditional form of the tank, including the unique suspension system with multiple small road wheels, has been faithfully reproduced. In addition, the kit comes with figures which depict a commander, gunner, driver, and a farmer. Abundant accessories such as a cart and milk cans are also included to create a simple diorama.
Military model vehicles 1:35
1:35 British Light Utility Car 10HP
300035308€35.49
Article number: 300035308 Product: 1:35 WWII British Light Utility Car 10HP British forces used passenger car chassis, during WWII, as the basis for pick-up style military vehicles. Officially identified as a "Light Utility Car" soldiers called them affectionately by the nickname "Tilly". The vehicle was equipped with a 30hp engine and rear wheel-drive. However, the car did not have sufficient off-road abilities and was soon replaced by 4WD vehicles. As a result, the "Tilly" was used in airbases for liaisons and in other paved areas. The vehicle served in the Dunkirk evacuation, North African and Italian fronts, and Europe from the Normandy invasion on. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Bundeswehr Leopard 2A6 (3)
300035271€63.99
Article number: 300035271 Product: 1/35 Bundeswehr Leopard 2A6 (3) The latest upgrade to the Leopard 2 is a newly designed 55 caliber 120mm smooth bore main gun. Measuring 1.3m longer than the 44 caliber main gun of its predecessor, the Leopard 2 A5, the new gun of the 2 A6 provides higher projectile velocity for increased range and penetration. The 2 A6 retains improvements made to previous Leopard 2 tanks including wedge shaped spaced armor effective against chemical weapons and improved electric gun control and stabilization system. The use of the 2 A6 continues to spread throughout Europe with the Netherlands, Spain and Greece adopting the 2 A6 as their main battle tank. About the Model 1/35 scale plastic assembly kit. Overall length: 314mm Accurately reproduced long 55 caliber 120mm smoothbore main gun adds to sense of power. 2 newly designed half body figures (commander and loader) included in kit. Goggles for figures, headlights and taillights reproduced using transparent parts. Kit features extra road signs for reproduction of realistic diorama. Includes decals to reproduce up to 4 different types of markings, including NATO versions used in Kosovo. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 BW Flak-Panzer Gepard (1)
300035099€26.49
Article number: 300035099 Product: 1:35 BW Flak-Panzer Gepard (1) This is a 1/35 scale plastic model assembly kit depicting the Gepard, a post-WWII anti-aircraft tank operated by West Germany. ★From the 4km-range 35mm cannons to the radar equipment front and rear, the form of the tank is captured in style. ★Features moving barrel and radar depictions, plus opening turret rear hatches. ★Metal net is included in the kit to recreate engine deck grille details. ★Comes with a commander figure in beret. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Ger.Barrel & Jerry Can
300035186€8.69
Article number: 300035186 Product: 1:35 Diorama-Set Ger.Barrel & Jerry Can During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. ★The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. ★Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. ★Use this set as accessory parts to expand dioramas featuring German subjects. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Motorcycle Orderly (2)
300035241€12.99
Article number: 300035241 Product: 1:35 Diorama-Set Motorcycle Orderly (2) During WWII, the German army adopted the use of the DKW NZ350 medium sized motorcycle; it is included with this set along with a sign post and a military police officer figure who is giving directions to the rider figure with an opened map. Parts of the NZ350 including the suspension and engine area as well as separate parts to depict the side bags and exhaust are finished with rich detail. Both figures feature natural poses and realistic expressions. The road signs seen on the post from Normandy, France are printed on the box and can be easily cut out and used when recreating your diorama. Two figures included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set US Military Equipm.Mod.
300035266€13.19
Article number: 300035266 Product: 1:35 Diorama-Set US Military Equipm.Mod. This 1/35 scale set will allow you to display the equipment seen loaded on modern U.S. military vehicles. In addition to individual equipment such as large and small Alice packs, sleeping bags, and sleeping mats, the set also includes a rich selection of 12.7mm and 40mm ammunition cases, jerry cans, and water tanks. Furthermore, the set also includes ration cartons and CIP (Combat Identification Panel) which can be attached to the U.S. Modern Utility Vehicle. This accessory set includes 25 types of equipment (total of 80 pieces) and is suitable for expanding your modern U.S. military diorama It can be used with support vehicles and frontline tanks. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set Ger. Field Commander (5)
300035298€20.49
Article number: 300035298 Product: 1:35 Fig-Set Ger. Field Commander (5) WWII German Commanders This 1/35 scale plastic assembly kit contains five WWII German field commander figures. ★The set includes an high-rank officer pointing out the target holding a map, a commander with a briefcase and a map case, a commander with a MP40 gun, a low-rank officer checking his Luger P08 gun, and a radio operator. ★The MP40 and Luger P08 guns as well as holsters, briefcase, and the radio have a rich finish. About the Uniforms and Equipment The German commanders wore uniforms which had same design as those of soldiers during WWII. However, commanders were allowed to wear tailor-made uniforms made from nicer materials. Likewise, they also wore better quality coats as well as leggings and boots. They usually carried guns such as the Luger P08 and Walther P38, but often used MP40 machine guns to fight against enemies on the frontlines. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set US Infantry Assault (6)
300035192€11.79
Article number: 300035192 Product: 1:35 Fig-Set US Infantry Assault (6) This plastic assembly model set features six (two noncommissioned officers & four infantrymen) U.S. WWII soldiers in a variety of dynamic in-battle poses. ★These figures are depicted wearing authentic M1941 and M1943 field jackets and canvas leggings. ★The tense situation of battle can be clearly seen through the expressions of the models such as the noncommissioned officers giving instructions to their men who are waiting for the order to attack. ★Weapons such as the M1 Garand rifles and Thompson submachine gun have a sharp realistic finish. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Floating Car (4)
300035253€11.29
Article number: 300035253 Product: 1:35 Fig.-Set Floating Car (4) This is a 1/35 scale plastic assembly kit of WWII German tank crew figures which is perfect for displaying with German vehicles such as the Kübelwagen and Schwimmwagen. The set contains 4 figures in realistic pose, including a field commander sitting on the door, a seated driver, a grenadier leader pointing forward, and a tank commander wearing a leather jacket. In addition, the package side features a road sign illustration from the Ardennes front which can be used in the creation of dioramas. Set includes four figures. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Fren. Leclerc Series 2
300035362€64.99
Article number: 300035362 Product: 1:35 Fren. Leclerc Series 2 • This is a 1/35 scale plastic model assembly kit. Length: 306mm. • Road wheels now come as molded plastic components. Please note that other parts are features remain the same as on Item 35279, except for slightly updated instructions and package. • The Leclerc is captured with exceptional detail, including Series 2 specific smoke dischargers, stowage boxes, short and long snorkels, and air conditioning unit. • French developed 120mm smoothbore gun with thermal sleeve is accurately reproduced. • Clear parts recreate headlights, taillights and periscope lenses. • Rear hull includes finely detailed engine grille and surface imperfections reproducing the non-slip finish of the actual tank. Other details include tow cable, external fuel tank, fuel tank pipe stay and fuel tank stays. • Commander's post features rotating sight and a commander figure. • Features 4 marking options, three in the 3-color NATO camouflage, and one in desert colors. See next page. • Compatible with Item 35280, a dedicated photo-etched parts set for the Tamiya 1/35 Leclerc Series 2. With 4 marking options included (these are unchanged from those in Item 35279): Option A: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 3/6 Squadron, France 2004 Option B: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, Rapid Reaction Platoon, France 2004 Option C: 2nd Armored Brigade, 6th - 12th Cuirassier Regiment, 1/12 Squadron, France 2004 Option D: Technical Section of the French Armée de Terre (Army), Qatar 1998
Military model vehicles 1:35
1:35 Ger. 20mm Flakvierling 38
300035091€7.79
Article number: 300035091 Product: 1:35 Ger. 20mm Flakvierling 38 Shooting an impressive 600 rounds per minute and greatly feared by Allied pilots was the German 20mm Flakvierling 38 MITSd.Ah.52 which is now recreated as a plastic assembly model kit. Although its purpose was to provide aerial defense against Allied aircraft attack from a grounded position, it was also seen used with trucks and other land vehicles as well on warships. Features of the model including the skyward aimed gun barrels, ammunition cartridges, operating handles, pedals etc. have all been realistically reproduced. The gun barrels along with its gun sight offer elevation and traverse. Also included with the set is a trailer to allow you the choice of assembling the Flakvierling 38 in transport or being fired. Ger. 2cm Flakvierling 38 Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. 38to Tank Destr. Hetzer (1)
300035285€56.99
Article number: 300035285 Product: 1:35 Ger. 38to Tank Destr. Hetzer (1) Already available as a 1/48 scale MM series kit, Tamiya now responds to the requests of military modellers and announces the release of the German Tank Destroyer Hetzer Mid Production in the 1/35 scale. About the Hetzer In 1943, the German high command ordered development of a new purpose-built tank destroyer to replace all of the interim vehicles like the Marder, and the Hetzer was quickly created to meet this requirement. Based on the Panzerkampfwagen 38(t), the Hetzer housed a crew of 4 in its low, compact hull. It was armed with a powerful Pak 39 L/48 75mm gun in a fixed mounting and featured sloped armor for enhanced protection. 2,584 were produced by May of 1945, and modifications were continually added during production, leading to differences between early, mid, and late production models. About the model •High-quality 1/35 scale assembly kit model of the mid production Jagdpanzer 38(t) Hetzer. •Brand new moldings with new details such as the remote control MG34 machine gun mount on the top of the hull and periscopic binoculars. •Includes both belt type and assembly type caterpillar tracks for more modeling options. •Accessory parts such as a jack and other tools add lifelike detail to the hull. •1 tank crew figure in realistic standing pose included. •4 types of markings also included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Jagdpanzer IV/70 (V) Lang
300035340€59.99
Article number: 300035340 Product: 1:35 Ger. Jagdpanzer IV/70 (V) Lang This is a completely new model of the fearsome German tank destroyer Jagdpanzer IV Lang. It is designed from the ground up to be part of the long catalog of models offered in the Tamiya 1/35 scale line up of model kits. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. December 2014 marks 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII. This model is perfect and right on time to liven up late Second World War dioramas. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Krupp Protze w/ 37mm PAK (4)
300035259€39.99
Article number: 300035259 Product: 1:35 Ger. Krupp Protze w/ 37mm PAK (4) About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm Pak Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland. About the Model ★1/35 scale ★Overall length: 250mm ★Every characteristic of this truck such as the low-profile bonnet, the chassis, the ammunition boxes and the crew seats on the rear part, as well as the spare wheel for the anti-tank gun has been realistically reproduced. ★A 3.7cm Pak anti-tank gun and various accessories are part of the set. ★4 all-new figures and decals for 4 different markings are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Kübelwagen T82 Africa (1)
300035238€19.49
Article number: 300035238 Product: 1:35 Ger. Kübelwagen T82 Africa (1) During WWII, the German Kübelwagen was greatly used at many fronts including North Africa. It was of a simple construction and came powered by a tough air-cooled engine and was greatly trusted by the German soldiers. The Kübelwagen type 82 which was seen at North Africa, featuring balloon type tires which allowed it to perform even on the desert sands, is now realized as a plastic assembly model kit. The car's interior and under chassis area including the suspension arms and engine guard are realistically reproduced. A standing soldier figure wearing shorts and a short sleeved shirt included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. PzKpfw. II Ausf. A/B/C (1)
300035292€47.99
Article number: 300035292 Product: 1:35 Ger. PzKpfw. II Ausf. A/B/C (1) After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy. The Panzerkampfwagen II used the Panzerkampfwagen I's hull and came armed with a 2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II tanks were manufactured. They led the surprise invasion on Poland and were the main tanks used in the attack on France. Later, they were successfully used in reconnaissance missions until the end of the war. About the Model •1/35 model of the German Panzerkampfwagen II tank. •Supplemental armor plate parts can be installed in the same manner as the actual tank. •Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants. •Assembly-type tracks feature single-piece sections for effortless construction. •Comes with a commander figure and three kinds of markings for the French campaign. •Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. PzKpfw.VI Tiger I E Early (1)
300035216€46.99
Article number: 300035216 Product: 1:35 Ger. PzKpfw.VI Tiger I E Early (1) The Tiger I needs little introduction, this legendary 88mm gun-toting AFV being the subject of countless war tales. Early production versions of the Tiger I were rushed from the factories by the end of 1942, bound for the harsh realities of the Eastern Front and the conflict with Soviet Russia, as well as the sweltering climes of North Africa. This model recreates such an early production variant, from the weighty overall design down to parts such as the turret with circular cupola, smoke dischargers, and large pistol port. Hull details such as air cleaners are of course not missed out. The kit also includes six marking options and an authentic figure. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.163 Sturmgeschütz IV (1)
300035087€23.99
Article number: 300035087 Product: 1:35 Ger. SdKfz.163 Sturmgeschütz IV (1) This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ★The powerful, form of the vehicle is captured in style. ★Features optional hull front cement block for armor reinforcement, plus parts recreating Schürzen side armor plates. ★Comes with a commander figure in action pose. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.171 Panther G Late V.(2)
300035176€46.99
Article number: 300035176 Product: 1:35 Ger. SdKfz.171 Panther G Late V.(2) A constant threat on account of its refined design, the Panther was a feared opponent for enemies of the German Army. In fact, a number of Panther variants were produced and perhaps the most refined was the late version of the Type G, which is recreated by this plastic model assembly kit. The model breathtakingly recreates the form of the tank, from the well-armored mantlet to the exhaust flame dampers for night combat, and right down to details such as the heater air intake. Of course, typical late production variant additions such as turret-top parts are all there, as are 2 figures in realistic pose, plus 3 marking options recreating Ardennes Front unit Panthers. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.9 Famo w/ Lowloader(12)
300035246€159.99
Article number: 300035246 Product: 1:35 Ger. SdKfz.9 Famo w/ Lowloader(12) About the Model ★After the impressive debut of the FAMO kit, Tamiya began to receive many requests for variations. Among the several types of FAMO to appear during WWII, the most frequently requested was the Sd.Ah.116 trailer-towing version. ★Stretching over 640mm, Tamiya's new beast-of-burden is 50mm longer than the Dragon Wagon and is the longest kit in the MM series. ★The massive trailer unit consists of both the front and the rear wheeled pieces on either ends of the long platform piece. ★Real rubber tires for heightened realism. ★This kit features ample metal and metal plated parts for various accessory pieces such as a chain for fixing the tank in tow to the platform. ★This kit brings back the eight figures of four poses included in the original "FAMO" kit, plus four all-new figures of three poses acting out a tank loading scene at the rear of the trailer. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Simca S5 Staff Car (1)
300035321€27.99
Article number: 300035321 Product: 1:35 Ger. Simca S5 Staff Car (1) The Simca 5 was a small passenger car which debuted in March 1936. It was almost identical to the Fiat 500 Topolino as the car was actually designed by Fiat. The car was equipped with an independent front suspension, a 4-speed transmission, hydraulically-controlled drum brakes, and a 12-volt electrical system. At the time, the car was meant to be affordable for the French public, in the same way that the later Volkswagen Beetle and Fiat 500 brought inexpensive private motoring to the masses in Germany and Italy respectively. It was also very fuel efficient. Many were in use by the time WWII began, and the German Army captured large numbers of them when they occupied France. These were pressed into military service as staff cars for transporting personnel and liaison duties. Over 46,000 Simca 5s were built by the time production ended in 1946. About the Item • 1/35 scale assembly kit model of the Simca 5 staff car. • The elegant silhouette of the car has been accurately reproduced. • Details such as front & rear suspension have been realistically depicted. • Doors can be depicted in either open or closed position. • Comes with a German Army driver figure as well as 3 marking options. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Sturmtiger 38cm RW61 (1)
300035177€52.49
Article number: 300035177 Product: 1:35 Ger. Sturmtiger 38cm RW61 (1) In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully reproduced as a plastic assembly model kit. The main hatch on the superstructure can be depicted in either open or closed position, the rocket launcher and escape hatch are moveable even after assembly, the loading crane can also rotate, and the heaviness of the tracks is also realistically depicted. Also included in the set is one figure and four rockets. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 German Infantry Mid-WWII (5)
300035371€20.49
Article number: 300035371 Product: 1:35 German Infantry Mid-WWII (5) • This is a 1/35 scale plastic figure assembly kit set. • Contains parts for 5 figures in realistic pose: a non-commissioned officer (NCO) with binoculars, a rifleman with his foot on some rubble, another with cases and one with grenade cases on the ground, plus a machine gunner. • Figures are depicted in mid-WWII M40 uniform, jack boots and suspenders. NCO and kneeling rifleman have a choice of helmet or cap. • A plethora of newly-molded accessories includes Kar98k rifle, MG34 machine gun, MP40 submachine gun and more.
Military model vehicles 1:35
1:35 Hummel (Late Production) (3)
300035367€60.99
Article number: 300035367 Product: 1/35 Hummel (Late Production) Catch the Buzz! The Hummel was developed by German designers in short time, intended to provide a quick boost for troops that had begun to struggle in the aftermath of their invasion of the Soviet Union in 1941. Its chassis was a hybrid using parts from the Pz.Kpfw.III and IV, and the gun was the powerful sFH18/1 15cm piece that fired 43.5kg howitzer rounds distances up to and over 13 kilometers. Hummels joined the fray from 1943 in the showdown Battle of Kursk, and served through the second half of WWII. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 190mm, width: 84mm. ★The model authentically captures the Hummel form with thin fighting compartment armor and late production integrated driving compartment. ★Features coordinated sight and 15cm howitzer elevation. ★Assembly type late production tracks feature one-piece straight sections for realistic depiction of upper run "sag." ★Includes 3 figures depicted in the act of loading shells. ★Comes with 2 marking options, for Eastern and Western Front vehicles.
Military model vehicles 1:35
1:35 Isreali MBT Merkava (1)
300035127€28.49
Article number: 300035127 Product: 1:35 Isreali MBT Merkava (1) Thanks to its manhandling of the Syrian-operated Soviet T-72 during the 1982 Lebanon War, the Merkava became a well-known and feared presence. This precision plastic model assembly kit recreates the Merkava, breathtakingly capturing its form including angled spaced armor across the hull and wedge-shaped cast turret with 105mm rifled gun. Details such as the thermal cover, side skirts, machine gun and more are depicted with aplomb. A commander figure is also included. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 MBT Leopard 2 A7V
300035387€59.99
Article number: 300035387 Product: 1:35 KPz Leopard 2 A7V Nearly twenty years since the release of Item 35271 (1/35 Leopard 2 A6) in 2004, Tamiya is proud to welcome the Leopard 2 A7V with totally new parts into 1/35 Military Miniature Series. The Leopard 2 A7V is an improved version of A7 (A7 is improved version of A6 and the "V" in the A7V designation stands for "verbessert" (improved) ), and features additional hull front armor and side skirts for improved defense. The suspension was also improved to help deal with the tank’s extra weight. The A7V inherits the A6’s L/55 120mm gun, but with the updated shell, the A7V can take on enemy armor up to five kilometers away. Units began receiving the A7V in September, 2021 and A7Vs saw further improvements such as turret-top stowage boxes and main sight visor. It seems with that this venerable tank’s 40-year career is set to carry on into the future thanks to its continued evolution. 1/35th scale, assembly kit, Model of the Leopard 2A7V, tools, paints and glue required Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 US 10-in-1 Cartons WWII
300012689€4.29
Article number: 300012689 Product: 1:35 US 10-in-1 Cartons WWII These detailed depictions of WWII 10-in1 ration cartons were initially a part of Item 25196, but are now to get their own release in the Detail-Up Parts Series. The 10-in1 Ration was supplied to U.S. troops from 1943 to 1945. One sleeved carton contained four individual boxes, each a day’s rations for ten soldiers and including canned food, biscuits, cereal and more. Item Contents/Information • Sheet dimensions: 200mm x 195mm. • Contains cut-out illustrations for sleeve, carton and inner box components. • One sheet can be used to make eight sets, and you can choose to depict the carton sealed up or even removed from the sleeve and open to reveal the inner boxes. • The sheet also features a basic explanation of the 10-in-1 ration in English and Japanese. • An excellent choice to add further detail to WWII-era U.S. subjects such as those below. Kit model, scale 1:35, Cardboard sheet with 8 catering cardboard, sheet size 200x195mm, Suitable for models from the period of the 2nd World War.
Military figures & Accessories 1:35
1:35 US Infantry Scout Set (5)
300035379€20.49
Article number: 300035379 Product: 1:35 US Infantry Scout Set (5) Tamiya is delighted to announce the release of a U.S. infantry set to follow the popular German army set (Item 35371 released in 2019). Various series of the short-sleeve M41 jacket and leggings had been the staple of the American Army uniform around June 1944 when the Invasion of Normandy occured, but from summer in that year onward, the new common uniform was developed for paratrooper, armored and mountain divisions, and the M43 field jacket and 2-buckle boot became common. It’s been 27 years since the last new release of a U.S. infantry set (Item 35192), so do not miss this chance to get these figures in multipurpose pose. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M151A2 Ford MUTT Truck (1)
300035123€13.99
Article number: 300035123 Product: 1/35 US M151A2 Ford MUTT Truck (1) The U.S. Armoured vehicle test course is located in Aberdeen, Maryland, and is one of the most rigorous and demanding coursed in the world. Early in April 1957, a familiar looking small vehicle was seen to be running over the course with comparitive ease, and upon closer inspection it turned out to be the replacement for the well known Willy's "Jeep", the new Ford M151. Outwardly this new vehicle loos very much like its older brother. Both are small, compact, rugged, simple to operate and maintain; however, the 151 incorporates all of the latest advanced features learned during combat operations in conflicts since world war II. Features such as the newly developed OHV engine, light semimonocoque body and 4 wheel independent suspension systems allowed it to outpoint all other submitted replacement vehicles for the ageing WWII Jeep. Development for this replacement vehicle was started by the Ford Motor Company were licensed to produce the vehicle and they delivered approximately 10,000 units a year to the U.S. Army, Navy Air Force and Marines. Shortly after its adoption it was selected by most of the nations of the free world as a replacement for their own light utility vehicles. Some of the advanced features incorporated into the M151 caused problems and defects were detected in the initial shipments, among the most serious was the strength and stability of the rear suspension system which was corrected and improved in 1964 and 1970. The M151A2 now in service has added safety features like stiffer rear suspension, large blinder lamps and a two step windshield wiper, safety glass and an impact absorbing steering wheel. With its extreme versatitliy the basic M151 can be altered into a combat ambulance; radio communications vehicle; 105mm recoilless rifle transport and a launcher for the new tow missile system adopted in the late 70's. Combat experience in VietNam has shown that the Ford M151 Military Utility Tactical Truck (MUTT) is indeed a very versatile go anywhere combat weapon and is likely to remain in service for years to come with military forces worldwide. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US M42 Duster w:3 Figures
300035161€33.99
Article number: 300035161 Product: 1:35 US M42 Duster w:3 Figures The M42 Duster was an anti-aircraft vehicle used in conjunction with tank units, equipped with a pair of 40mm cannons on an open-top turret, and powered by a 500hp engine that let it achieve speeds of up to 70km/h. It was accepted into service with the U.S. Army in 1953 and proved an effective anti- aircraft weapons system. • 1/35 scale plastic model assembly kit. Length: 180mm, width: 93mm. • Gun detail, loader’s seat, rifles and more in the interior. • Three marking options included, offering a choice of U.S., Japan Ground Self Defense Force and former West German Army M42s. • Belt type tracks that can be painted and attached using Tamiya cement. • NEW for this RE-ISSUE: Three figures were originally included in the motorized version of this kit (Item 30027, from 1970). They depict crew in the turret, in the act of locating a target. Updated package and 4-language instruction manual.
Military model vehicles 1:35
1:35 US MBT M1A1 Abrams w/Mine Plow(2)
300035158€49.99
Article number: 300035158 Product: 1:35 US MBT M1A1 Abrams w/Mine Plow(2) Minefields were a constant hazard for invading U.S. forces during the Persian Gulf War of 1991; chief among their countermeasures was the trusty M1A1 tank fitted with a mine plow. This plastic model assembly kit expertly recreates such an M1A1 Abrams with mine guard and plow blade equipment depicted using separate parts. Metal chains and enamel wire are included, to be employed in the recreation of the roller at the front of the vehicle. Modelers can choose to assemble the model with hatches open or closed, and will be delighted by the range of accessories, including spare wheels, ammo cases and more! The kit comes with a full body commander figure and loader torso figure to further enhance its realism. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Med.Tank M4 Sherman Ea.(3)
300035190€35.99
Article number: 300035190 Product: 1:35 US Med.Tank M4 Sherman Ea.(3) This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory. The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch. Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced. Modellers can also enjoy turret interior details such as the main gun breech and radio equipment. Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included. Comes with driver and radio operator torso figures as well as 1 commander figure. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 US Navy PBR 31 MK.II Pibber Vietnam
300035150€47.99
Article number: 300035150 Product: 1:35 US Navy PBR 31 MK.II Pibber Vietnam This high-speed, heavily armed small craft was used heavily by U.S. forces in the Mekong Delta region. It is recreated with aplomb in this plastic model assembly kit, with details accurately captured from the hull form to the interior. The lethal 12.7mm and 7.62mm machine guns, plus the 40mm grenade launcher are realistically depicted along with a host of accessories such as jerry cans, plus 4 figures.
Military model vehicles 1:35
1:35 US Tank M41 Walker Bulldog (3)
300035055€19.49
Article number: 300035055 Product: 1:35 US Panzer M41 Walker Bulldog (3) This is a 1/35 scale plastic model assembly kit depicting the M41 Walker Bulldog. ★The compact form of the 72mm gun-toting M41 is captured in style. ★From accurate surface textures to depictions of weld lines, there is plenty of detail. ★Comes with decals to depict either a U.S. or a Japan Ground Self Defense Force vehicle. ★Includes a commander figure and two soldiers to add further life to your model. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Brit.BSA M20 Mot.c./Mi.Police
300035316€20.49
Article number: 300035316 Product: 1/35 WWII Brit.BSA M20 Mot.c./Mi.Police The Birmingham Small Arms Company has a long history as a firearms manufacturer and was also well-known as the world's largest motorcycle manufacturer during WWII. In 1939, BSA began production of a military version of their M20 commercial motorcycle that was fitted with a Lucas light and other additional equipment. It was powered by a 12hp single-cylinder 500cc side-valve engine and offered superb reliability and ease of maintenance. Modifications were made during the course of the production and late-war motorcycles featured an air filter fitted onto the fuel tank. Over 126,000 units were produced during the war and most of them were deployed with the British Army. They saw service on every front for a wide range of duties including liaison and supply convoy escort. Some were also used by the RAF and British Navy. After the war, the M20 continued to serve throughout 1950s and some were even used until the end of the 1960s. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII Dt. Panzerjäger Nashorn (4)
300035335€70.99
Article number: 300035335 Product: 1:35 WWII Dt. Panzerjäger Nashorn (4) This is a highly detailed model of the WWII German tank destroyer Nashorn. The full size vehicle featured an 8.8cm gun also known as a PAK 43 and it was fitted to the upper surface of a light turret less chassis. Even though the vehicle was lightly armored, the PAK43 weapon was capable of penetrating 190mm of armor at 1,000 meters. The Nashorn saw action with German heavy antitank battalions fighting Soviet and Allied forces during much of the conflict. Due to its relatively low cost and superior mobility compared to heavier tanks it remained in production until the end of the WWII war. Decals included. Features: • The model accurately recreates the powerful form of the Nashorn, thanks to detailed research performed using an actual example of the vehicle in a museum in Russia. • Features faithful reproductions of the 71-caliber 8.8cm gun and complex fighting compartment. • Metal parts are used to ensure that the gun has authentic movement and weight. • Comes with 3 marking options, including winter and Eastern front versions. • 4 included figures depict driver and 3 crew members in a variety of realistic poses. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig-Set Ger.Infant. Winter (5)
300035256€14.99
Article number: 300035256 Product: 1:35 WWII Fig-Set Ger.Infant. Winter (5) In a crouched position, these soldiers are very cautious of their surroundings while pushing forward following a tank. Such a tense frontline scene can now be displayed with this plastic assembly model set which includes five German soldier figures wearing winter uniforms, cotton-made smocks, and realistically reproduced winter overcoats seen during the middle stages of WWII. The noncommissioned officers are depicted carrying weapons such as an MP40 submachine gun and rifles and standing in lower poses than their field commander who has a Walther P38 and a grenade in each hand. Set includes five figures. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Fig.-Set Ger.Tank Grenadie.(8)
300035061€7.19
Article number.: 300035061 Product: 1:35 Figure Set German Pz Grenardiere (8) In an unprecedented variety, TAMIYA is showing plastic models here that are unparalleled in terms of their design, detailing, construction and accuracy of fit. These models stand up to every quality test and give an insight into weapon technology and development. 8 figures Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Ger.Jerry Can Set (12) Early
300035315€6.99
Article number: 300035315 Product: 1:35 WWII Ger.Jerry Can Set (12) Early Originally conceived for use by German forces during WWII, the Jerry Can's design proved to be so good that it was reverse-engineered for use by the Allies. The 20-liter container was tough and compact, allowing them to be easily stowed aboard vehicles. It had a simple but effective lid mechanism with three handles. The early type featured a simple cross-shaped indentation for strength while later types had more complex indentation designs. Set contains 12 early type Jerry Cans, 2 types of storage boxes, a notek light, and a jack with its base. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 WWII Ger.Milit.Insignia Decal Vol.2
300012641€11.79
Article number: 300012641 Product: 1/35 WWII Ger.Milit.Insignia Decal Vol.2 Add further fine details to your 1/35 scale German WWII Infantry figures with this easy-to-use decal set. These are designed with the modeler in mind to save time and stress allowing for a more realistic finish. 1:35
Military model vehicles 1:35
1:35 WWII Ger.SdKfz.171 Panther A (2)
300035065€21.99
Article number: 300035065 Product: 1/35 WWII Dt. SdKfz.171 Panther A (2) In the beginning of 1942, in order to fight against the T-34, the German military ordered a new tank from Dymler-Benz and M.A.N. companies with the following specifications: Weight- 35 tons; speed- 60 km/h; armament 75mm long gun and armour, 60mm thick in front hull, 35mm thick in the rear and 100 mm at the front of the gun turret. Lastly, it was specified that the tank be equipped with a Maiback HL210, water-cooled, V-type 12 cylinder engine. In May of the same year, M.A.N.'s model was chosen without waiting for completion of a prototype tank. However, there were 2 important modifications. First, in order to meet the military's demand, considerably more than the original 35 ton weight was needed. Second, the military ordered a change in the thickness of the frontal armour from 60mm to 80mm. Because of these changes, the engine type had to be chanded from HL210 to HL230. Then, in order to accommodate this engine, a much better gear was needed, but mass production began without this last change, which resulted in frequent gear malfunctions and related trouble. This became the Panther's greatest defect. In the same year, Dymler-Benz and Henschel were ordered to produce the Panther. Therefore, production was greatly increased and a total of 6283 Panther Tanks were produced, second only to P2KW-4 in number. The first mass produced Panther type D was not equipped with a machine gun but after the experience of close battle. A 7.92mm MG 34 was added to the Panther's right front hull armament beginning with its type A. The special feature of the Panther was the left and right driving mechanism. This created an interchangeability of movements, using the torsion bar system. By 1944, the Panther was further improved from Type A to Type G with a change in its side shape. The Panther continued its activities against the Allied Forces throughout the latter half of the war. One of the famed battles it waged during this latter period probably is the one against the new Soviet JS II heavy tank on the eastern front. The Panther at that time, was the main strength tank of the Gross Deutschland, the strongest German Mechanized Division, under the command of General Hasso Von Manteuffel. The Panther reportedly destroyed 350 JS II tanks and 20 other armoured vehicles in the battle. It was a complete one-sided victory for the Panther and one for the book of military history. The Panther, therefore, was an extremely balanced tactical tank and should be called a masterpiece destined to bear the last glory of German war technology. It's glorious name will forever remain in the records of the 2nd World War. Since 1943, during World War II, thee appeared an unusually fast tank on the European Front that silhoueted among its German Mechanized Division. This was the "Panther" medium tank, with its formidable power of attack and fast maneuverability, that soon became an object of terror to men of the Allied Forces. If put to a question, "Which was the best German tank during the war?" The majority of the people, without hesitation will answer the name "Panther". It is known that the PZKW-IV and the Tiger-II tanks were also produced by German technology and were both outstanding tanks. But the PZKW-IV was meant to be replaced by the Panther, and the Panther, showing improved attacking and defensive powers and accurate maneuver ability on the field, soon became the German's main strength tank. The Tiger I with its 88mm gun would seem at first to be superior to the Panther's 75mm gun in attacking power. But when viewed from the point of armour piercing power of the shell, the Panther, with its 70 caliber KWK 42 anti tank gun and sloping side armour provided much stronger in actual fighting than the Tiger I's 56 caliber KWK 36 anti tank gun with vertival side armour. The Tiger II tank, which should be called the 'improved Panther' was much stronger in attacking and defensive power than the Panther. However, considering the number of Panthers produced and used during this time, the Panther tank was still number 1. The main strength German tanks at the start of the war were all unique in the sense that their designs were completely based on German plans and ideas. But the Panther was influenced by the Soviet masterpiece tank T-34 which was seen for the first time on the east European Front. Ger. Panther Med. Tank Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 WWII PzKpfw. II Ausf.F/G (5) SK.121
300035009€14.49
Article number: 300035009 Product: 1/35 WWII PzKpfw. II Ausf.F/G (5) SK.121 In the morning of September 1, 1939, the German forces consisting of the 3rd, 4th, 8th, 10th and the 14th Armies invaded Poland all heading for Warsaw, its capital. This was the beginning of the 2nd World War that had shaken the whole world for six years and the Germans made a good show of their war efforts at the start with this violent surprise offensive by massed air forces and mechanized ground forces in close co-ordination, the so-called "Blitzkrieg". It was none other than the Pzkpfw 11 that had played the key role in this Blitzkrieg which started with the invasion of Poland to be followed by break-through of the Maginot-line 7 months later and ended with the surrender of France. In anticipation of the delay in production of the two main strength tanks of the Pzkpfw III and the Pzkpfw IV then under development, the Ordnance Department decided in 1934 to develop a new tank instead to fill the gap. It gave specifications of the proposed new tank to the following three companies - the Mann, the Krupp and the Henschel. The specifications envisioned a tank weighing less than 10 tons and armed with 2 cm and 7.92 mm machine guns, one each. Among the designs of the rivaling three companies presented, the one by the Mann was selected and the Mann in cooperation with the Daimler-Benz developed a first tank of the a1 type in 1935. When 25 tanks of the same type were produced, the tank was officially named, "Panzer Kampfwagen II". After the first 25, another 25 tanks of the a2 type and 50 of the a3 type were produced in succession by 1936. Tanks of these 3 types thus produced were equipped each with a 6-cylinder, 130HP, May-Bach HL37 engine and credited with a maximum speed of 40km/h. However, it was decried that the horse-power was not enough and the engine was replaced with a May-Bach HL-62 one of 140 HP. The frontal armour, too, was reinforced and a new tank of the b type was produced. In 1937, the Pzkpfw II was further improved and a series of new ones of the c type were produced. The c-type tanks used 5 large sized road wheels suspended only at one end by leaf spring. This suspension system newly introduced became a common feature to all the pzkpfw II produced ever since. Also, the front portion of hull was reshaped into a more roundish form. From 1937 to the beginning of 1940, Pzkpfw II of mass production types, A, B, and C, were manufactured in great numbers. To increase their productivity's, the frontal armour plate was replaced with an angular single-piece one. Pzkpfw II with specifications described above played the key role in the Blitzkrieg. At the start of this Blitzkrieg, the German tanks numbered 2580 in all, of which nearly half amounting to 955 in number were the Pzkpfw II. In 1940, mass production of the F type was started. The new Pzkpfw II was reinforced in its frontal armour (thickened to 35mm) and side (to 20mm). However, the improvement added its weight and its overall weight reached up to 9.5 tons. The main gun was replaced with a 20mm KwK 30 machine gun. The gun used to be an anti-air MG but remodeled into a main gun for a tank. Frontal armour to cover upper hull, also, was changed into a plain single-piece plate. Further, a false look-out window beside the genuine one for the driver and another for the same were newly added. These were the distinct features of the F-type tanks. After the F-type ones, those of the final mass-production type G were produced. Their main guns were much more powerful KWK 38 MGs, and each tank of this type was fixed a sundries-box at the rear of gun turret. These two were main features that clearly distinguished the G type from the preceding ones. A series of the Pzkpfw II succeeding those of the g type were produced until those of the L type appeared. However, respective numbers of the Pzkpfw II of types produced were all small. It is true that judged by the current standard, these Pzkpfw II look quite inferior both in fire and defensive powers. But when compared with those of other countries active at the time, the Pzkpfw II should be ranked as by far the most superior one. Indeed, its nimble mobility matching well with the German application was the driving force of the spectacular victory won by the Germans at the initial period of the World War II. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Zimmerit Dekor-Satz Tiger I
300012647€11.29
Article number: 300012647 Product: 1/35 WWII Zimmerit Dekor-Satz Tiger I Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 35194 1/35 scale German Tiger I Mid Production and Item 35146 German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved.
Military figures & Accessories 1:35
1:35 Zimmerit Sheet KingTiger Henschel
300012648€11.99
Article number: 300012648 Product: 1:35 Zimmerit Sheet KingTiger Henschel Simulating Zimmerit on military models using puttyenhances the model’s presence but at the same time it requires advanced skills and is time consuming. These stickers enable reproduction of Zimmerit on Item 35164 German King Tiger "Production Turret." About the Item • Zimmerit Sticker Sheet x1 • Compatible with 1/35 German King Tiger Production Turret" (35164)
Model ships 1:350
1:350 Musashi 2013
300078031€114.99
Article number: 300078031 Product: 1:350 Musashi 2013 Jap. Battleship The Musashi was the second ship in the Yamato-class which were the largest battleships ever built. Completed in 1942, the Musashi took part in various campaigns before finally meeting her fate at the hands of U.S. Navy aircraft in the Battle of Leyte Gulf. Tamiya"s precision-made assembly kit model recreates this giant battleship in exquisite detail, including her defensive anti-aircraft suite of numerous single 25mm cannons on the main deck. This different anti-aircraft armament makes for an interesting comparison with the Yamato. Tamiya rereleased Musashi in 1981 and this great model kit is available again with new mast parts. - Comes with a display stand. - Comes with newly-designed mast parts.
Military model vehicles 1:48
1:48 Brit. Armo. scout car Dingo II
300032581€17.49
Article number: 300032581 Product: 1:48 Brit. Armo. scout car Dingo II This British armored scout car boasted enviable maneuverability and armor up to 30mm thick on its compact hull. Often referred to by its nickname of "Dingo", delivery of the Mk.I variant began in 1939; the later Mk.II featured various modifications, including an overhaul of the steering system. All told, more than 6,600 "Dingoes" were manufactured until 1945, serving in a range of locations in both reconnaissance and command car roles. About the Model This is a 1/48 scale plastic model assembly kit of the "Dingo" Mk.II. - Length: 69mm, width: 37mm. - The lightweight and compact form with distinctive flat panels is authentically recreated. - The model can be assembled with folding roof in open or closed position. - Suspension is realistically depicted with intuitive parts makeup. - Commander and driver figure are included in realistic action pose. - Contains one set of markings to recreate a vehicle in combat in Europe. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 F-16CJ Fighting Falcon Lockheed Mar
300061098€62.99
Article number: 300061098 Product: 1/48 Lockheed Mar.F-16CJ Fighting Falcon About the F-16CJ The F-16 is one of the world's top lightweight multi-role fighter aircraft. Since first deployment to U.S. Air Force (USAF) units in the late 1970's, total production numbers have exceeded 4,000, making it the second most highly produced jet fighter plane following the F-4 Phantom. The latest F-16 variant deployed to USAF units, the F-16C Block 50, is capable of precision night and all-weather bombing, and features advanced digital electronics for radar and cockpit displays. The slight variant, the F-16CJ (Block 50), is fitted with HARM Targeting System (HTS) and is used specifically for SEAD (Suppression of Enemy Air Defenses) missions. The F-16CJ (Block 50) has flown SEAD missions over Iraq while monitoring the northern and southern no-fly zones and during Operation Iraqi Freedom. About the Model - Model represents the F-16CJ (Block 50) as used for USAF SEAD missions. - Sleek fuselage including aerodynamic blended wing body design accurately reproduced. - Accurately curved bubble top canopy can be assembled in the opened or closed position. - Horizontal stabilizers are movable and flaperons can be modeled in both the up or down positions. - A range of weapons and accessories are included such as HARM, AMRAAM, and Sidewinder missiles (M & X variants), detachable external fuel tanks, ECM pod, and HTS pod. - One pilot figure included and can be depicted with either standard or JHMCS flight helmet. - Detailed markings for 3 aircraft, including the 5th Air Force commander's aircraft stationed at Misawa airbase in 2005, are included.
Model aircraft kits 1:48
1:48 Ger. Focke Wulf Fw190 A-8/A-8R2
300061095€38.49
Article number: 300061095 Product: 1:48 WWII Dt.Focke Wulf Fw190 A-8/A-8R2 Combating the Flying Fortresses In 1944, as the U.S. began their long range strategic bombing campaign in earnest with heavily-armed B-17 and B-24 bombers, the Luftwaffe developed the specialized "bomber-killer" R2 variant of the Fw190 A-8. Tamiya now brings you this formidable fighter in the 1/48 scale, and with all the parts included in this kit you can choose to build either the R2 variant or the A-8. About the Fw190 A-8/R2 The Focke-Wulf Fw190 was one of the Luftwaffe's best front-line fighters of WWII. Of all the different variants, the A-8 armed with four 20mm cannon and two 13mm machine guns was the most widely produced. A sub-variant of the A-8 was the R2, which had two of the 20mm cannons replaced by more powerful 30mm guns and added armor protection for its role in attacking the giant 4-engined Allied bombers. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Ger. Messerschmitt Me262 A-1A
300061087€44.99
Article number: 300061087 Product: 1:48 Ger. Messerschmitt Me262 A-1A About the Messerschmitt Me262 A-1a The revolutionary Messerschmitt Me262 was the first jet powered plane to see service. The construction of pre-production aircraft designated Me262 A-0 started in April 1944 but the fighter production version that should have been the first version to be mass-produced was delayed because of Hitler's strict contrary orders prioritizing the deployment of fighter/bomber A-2a version. Then, in November 1944, the Me262 A-1a fighter version was finally put into production. It was equipped with four 30mm cannons in the nose to counter Allied bombers and escorting fighters. Late production planes were equipped with hooks under the nose to mount rocket launchers and with 24 R4M air-to-air rocket under the wings making the Me262 the most feared German fighter by Allied pilots. About the model - Tamiya presents the plastic assembly kit of the Messerschmitt Me262 that was used by the Luftwaffe during the closing days of WWII. - 1/48 Scale, Overall Length: 221mm, Overall Width: 264mm. The unique form of the Me262 with its engine nacelles under each wing has been accurately replicated. - The 4 X 30mm cannon mounted in the nose and cockpit have been reproduced down to the finest details. Canopy and gun bay access panels can be mounted in either open or closed position. - R4M air-to-air rockets with launchers to be mounted under the wings and W.Gr 21 air-to-air rocket-launchers to be assembled under the nose are part of the kit. - Nose wheel well comes as a die-cast weight. - A pilot figure and decals for 4 different markings are included in the kit. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:48
1:48 Ger. Nachtjäg. Heinkel Uhu He219
300061057€54.99
Article number: 300061057 Product: 1:48 Ger. Nachtjäg. Heinkel Uhu He219 The He 219 was arguably the Luftwaffe's best nightfighter during WWII and was notable for an extraordinary debut mission in June 1943 when a prototype shot down five RAF Lancaster bombers. This kit depicts the final production variant, the A-7, which was equipped with DB 603G engines for improved high-altitude performance. Distinctive features such as the slim fuselage, greenhouse-style canopy, and tricycle landing gear are all accurately reproduced. The cockpit interior even features an integrated nose weight to ensure the model stays balanced when displayed. Two crew figures and three marking options are also included.
Model aircraft kits 1:48
1:48 Ger. V-1 Fiseler Fi103
300061052€14.49
Article number: 300061052 Product: 1:48 Ger. V-1 Fiseler Fi103 Powered by a pulse jet engine, the unmanned V-1 flying bomb developed by Germany during WWII would reach speeds of 640km/h, fly a certain distance, then crash and explode. This kit reproduces the simple form of this weapon and also includes parts to depict a transport trolley.
Model aircraft kits 1:48
1:48 Grumman F-14D Tomcat
300061118€114.99
Article number: 300061118 Product: 1:48 Grumman F-14D Tomcat • This is a 1/48 scale plastic model assembly kit. Fuselage length: 398mm, wingspan: 408mm (with variable sweep wing in fully forward position). • Tamiya designers spent many hours close up with real aircraft to obtain a highly accurate end product. • Captures F-14D-specific features such as the engine afterburner nozzles, vertical stabilizers and even minute panel lines. • A detailed cockpit includes depictions of updated instrument panels and ejection seats. • Model parts depict late variants of Phoenix, Sparrow and Sidewinder air-to-air missiles. Also included are parts for drop tank, laser- and GPS-guided bombs, LANTIRN targeting pod, TARPS reconnaissance pod and jamming pod – a comprehensive line-up. • Features moving depiction of variable sweep wing. 2 sets of parts - interchangeable after completion - depict sealing plates and air bags with wing in fully swept and fully forward positions. • Slide molding was used to ensure highly realistic canopy, air intake side and fuselage side sections. • Poly caps allow movement of horizontal stabilizers. • Comes with realistic figures depicting pilot and RIO (Radar Intercept Officer) in seated pose. • Includes high-quality decals to realize 4 (planned) marking options, plus a handy set of masking stickers for use when painting the canopy.
Model aircraft kits 1:48
1:48 Jap. Mitsub. A6M5/5a Zero Fighter
300061103€49.99
Article number: 300061103 Product: 1:48 WWII Jp.Mitsub.A6M5/5a Zero Fighter The Mitsubishi A6M Zero was the Japanese Navy’s main fighter throughout the course of WWII. In the latter half of the war, the Model 22 was refined to create the Model 52 to counter new U.S. aircraft such as the P-38 Lightning and F4U Corsair. It featured 50cm shorter wings with rounded wingtips, individual exhaust pipes and top speed of 565km/h. A6M5a was produced with a larger capacity (125 rounds) belt-type cannon ammunition system in February 1944. The Model 52 first saw action during the closing stages of the Solomons campaign in the autumn of 1943 and went on to fight in the skies above the Marianas, Iwo Jima, Okinawa, as well as Japan itself, until the end of the war. This is a 1/48 scale assembly plastic model of the Mitsubishi A6M5/5a Zero Fighter. ★Length=190mm, Width=229mm ★Zero fighter’s elongated proportions from nose to tail and the exquisite engine cowling are all accurately reproduced thanks to a complete measurement of the actual plane. ★Highly detailed cockpit and main landing gear well parts. ★Choice of an up or down flaps, as well as open or closed cowl flap. ★A6M5a with belt-type cannon ammunition system can be recreated. Differences from the A6M5 such as wing panels, spinner and wooden drop tank are highly detailed. ★3 types of markings are included. ★In addition to a sitting pilot figure, 4 different types of standing pilot figures are included.
Military model vehicles 1:48
1:48 Tank destroyer Elefant
300032589€33.49
Article number: 300032589 Product: 1:48 Tank destroyer Elefant This is a 1/48 scale assembly model of the German Heavy Tank Destroyer Elephant. The newly tooled 1/48 Elefant has extensive detail, even at this smaller scale, thanks to the extensive research conducted by Tamiya's designers to make the 1/35 scale rendition. The development of the full-size Elefant is an interesting case study in weapons development. Its chassis was developed by Porsche in the design competition for the Tiger I, but while Porsche was sure enough of its success to ready 100 examples of the chassis before the end of the competition, the design was not chosen. The "left over" chassis were turned into the Elefant on the orders of Hitler in 1942 - some 90 examples were built by May 1943. With armor plates, up to 200mm thick and a powerful long-caliber 8.8cm gun, it was a formidable piece of equipment, and served German troops until the end of WWII.
Model aircraft kits 1:48
1:48 US P-38 J Lightning
300061123€75.99
Article number: 300061123 Product: 1:48 US P-38 J Lightning Our legendary 1/48 Aircraft Series welcomes a new addition in the form of the J variant of the Lockheed P-38 Lightning! The Lockheed P-38 Lightning was an American twin engine fighter aircraft produced by Lockheed; it was the first Lockheed fighter aircraft which was officially adopted into service. The P-38’s variants were used during World War II and they reached about 10,000’s production. Equipped with intercoolers under engines, the P-38J Lightning showed 1,450hp at high altitude and maximum 1,600hp, plus longer range courtesy of fuel tanks in wingtip leading edges in addition to the main fuel tank. As a result, the P-38J offered stable and astonishing performance at any altitudes, and gained great renown among American fighter aircraft.
Model motorcycle kits 1:6
1:6 Honda CB750F 1979
300016020€104.99
Article number: 300016020 Product: 1/6 Honda CB750F 1979 This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. ★The beautiful curved lines of the bike have been realistically reproduced. ★The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. ★The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. ★Exhausts also feature a smooth metal plated finish. ★In addition, side covers are removable to showcase the internal mechanisms even after assembly. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:6/1:12/1:24 Cable 0.65mm OD Bla 2m
300012676€4.49
Article number: 300012676 Product: 1:6/1:12/1:24 Cable 0.65mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,65mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Model car kits 1:24
1:6/1:12/1:24 Cable 0.8mm OD Bla 2m
300012677€4.49
Article number: 300012677 Product: 1:6/1:12/1:24 Cable 0.8mm OD Bla 2m This cable features a wire core in vinyl casing. It’s great for reproducing the various piping and cables which appear on Tamiya's highly realistic scale car and motorcycle models. The wire core ensures greater flexibility and durability than standard hollow tubing in Tamiya model kits. • Length: 2 meters. • Please note that using these cables will require the making of holes in the subject model. Vinyl-Cable/Hose with wire core, Diameter 0,80mm, Scale 1:6, 1:12 and 1:24, to replicate ignition wire, wiring harness and pipe cables, different diameter available, Packing contains 2m.
Model ships 1:700
1:700 Brit. Destroyer E-Class WL
300031909€18.49
Article number: 300031909 Product: 1:700 Brit. Zerstörer E-Klasse WL To protect the Empire's shipping lanes, the British Navy built large numbers of destroyers in the years leading up to World War II. The nine ships of the so-called E-class, Exmouth, Echo, Eclipse, Electra, Encounter, Escapade, Escort, Esk and Express, were completed in 1934 and took part in many important operations during World War II, including the hunt for the Bismarck and the Battle of the Java Sea. The dimensions of the E-Class roughly corresponded to its predecessors. However, the ships had enlarged superstructures and also equipment for anti-submarine defence and a mine detection facility on board. The true-to-original TAMIYA kit on a scale of 1:700 contains decorative stickers for all nine E-Class ships. Model kit, Scale 1:700, Waterline, Destroyer, Manual, Decal, Length 143 mm. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Model ships 1:700
1:700 US Hornet Aircraft Carrier WL
300077510€18.79
Article number: 300077510 Product: 1:700 US Hornet Flugzeugträger WL The USS Hornet was completed in 1941 as the third Yorktown-class aircraft carrier. She is best known for her central role in the so-called Doolittle Raid on April 18, 1942, the first US air attack on the Japanese home islands. Only a few months later, in October 1942, the Hornet was badly damaged by Japanese bombers in the battle of the Santa Cruz Islands. She finally sunk on October 27th. Most of the crew could be rescued by the American escort ships, but 111 men died. The detailed TAMIYA model kit contains the aircraft carrier as well as parts for 16 B-25 bombers.
Model aircraft kits 1:72
1:72 Vought F4U-1A Corsair
300060775€24.49
Article number: 300060775 Product: 1/72 Vought F4U-1A Corsair About the Vought F4U-1A Corsair Introduced into service in 1942, the Vought F4U-1 featured inverted gull wings and a massive 2,000hp engine spinning the largest propeller mounted on a fighter at the time. While the fighter's performance and toughness was quite impressive, deficiencies such as inadequate forward visibility, restricted all-round visibility due to the early frame-like canopy, and the tendency for the left and right wings to stall at different speeds led to various improvements being added throughout production, eventually resulting in the F4U-1A version. These improvements included a longer tailwheel leg for better forward visibility, a new canopy for better all-round visibility, and an almost unnoticeable 15cm stall strip fixed to the leading edge of the right wing to ensure both wings would stall at the same speed. About the Model •1/72 scale assembly model kit of the Vought F4U-1A Corsair •Kit depicts a final F4U-1A Corsair production version with all improvements or versions at different stages of the improvement process. •Parts for 1000lb. bomb, external fuel tank, two types of propellers, and two types of tailwheel are included to provide many modelling possibilities •High quality decals for 3 different sets of markings Vought F4U-1A Corsair Warning! Not suitable for children under 14 years.
Model car kits 1:24
Carbon Decal Plain F
300012679€8.19
Article number: 300012679 Product: Carbon Decal Plain F Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier. • Sheet dimension: 130mm x 190mm x1. • Sheet features no pre-marked shapes and can be cut to desired shape and size. • Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale. Wet sliding decor in carbon look, 1/6th, 1/12th and 1/24th scale carbon Structure smooth/fine, 130x190mm sheet size, instructions.
Model motorcycle kits 1:12
Honda CB750F
300014006€24.99
Article number: 300014006 Product 1:12 Honda CB 750F The Honda CB750F Motorcycle appeared on the Japanese market in June 1979 and was shortly to become the best seller in the 750 class. Just ten years prior to their 750F release, Honda opened up the field of multicylinder bikes with their now famous four cylinder CB750. Honda had won several Grand Prix motorcycle races with multi-cylinder bikes, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power, and so shocked the industry that shortly many of the famous makers produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their "Z" series DOHC 4 cylinder 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB750K DOHC with four valves per cylinder, a powerful 68hp, and new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F which had been copied from their racing RCB bike. This styling was new to stock motorcycles in the world. With the low positioned handle bars and rear positioned foot rests, allowed a "slouched" riding position. The style is setting the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, semi-air front suspension system, and FQV damped rear coils. Braking utilizes the dual piston caliper system, with dual discs in front and a single disc at the rear. A newly designed racing type front fender with spoiler has proved to be very popular among the bike enthusiasts. The overall styling of that unveiled in 1979, with the smooth flowing lines from tank to tail light have been retained, and it is likely that this fine motorcycle will stay at the forefront of sales for years to come. Honda CB750F
Model motorcycle kits 1:12
Szuzuki GSX1100S Katana
300014010€24.99
Article number: 300014010 Product: 1:12 Suzuki GSX1100S Katana Making its exciting debut in 1980 at the IFMA trade show in Cologne, Germany and later released to the public in 1981 was the Suzuki GSX1100S Katana. The aggressive form of the Katana designed by Hans Muth is reproduced by this plastic model assembly model kit. The mechanical mood of the 4-cylinder DOHC engine, along with ignition cords, brake pipes, and instrument cables which are reproduced with vinyl tubing, has been precisely captured. In addition, metal screws are included to provided extra strength to parts such as the wheel axles. Solid synthetic rubber tires front and rear have tread patterns, and are mounted onto accurately reproduced renderings of Suzuki's famed star-shaped die-cast wheels to provide the model with a highly realistic presence.
Bundle - 33 %
RC trucks
Tamiya RC Volvo Bundle
BDL-300056312€434.95
Product bundle consisting of: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki / 1/14 Tractor Truck Driver Fig. / TS-47 Chrome Yellow Gloss 100ml Article number: 300056312 Product: 1:14 RC EU Truck Volvo FH12 Globe.420 Ki Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Article number: 300056536 Product: 1/14 Tractor Truck Driver Fig. Add a whole new level of realism to your 1/14 scale tractor truck with this assembly figure, which was originally included in the Grand Hauler (Item 56344). It is now available as a separately-sold Option Part. Figure Parts x1 Can be attached with double-sided tape, or cement. Note that some models may require modification of figure for attachment. Warning! Not suitable for children under 14 years.
Model car kits 1:20
Tyrrell P34 1976 Japan GP w/PE
300020058€49.99
Article number: 300020058 Product: Tyrrell P34 1976 Japan GP w/PE The Tyrrell P34 caused a sensation within the F1 world when it was unveiled in 1975. It sought to enhance braking and cornering performance by reducing the size of the drag-inducing front tires while preserving contact patch area through the use of 4 tires, thereby creating the only 6-wheeled machine in F1 history.The Tyrrell P34 appeared at the 1976 Japanese GP in an overall blue livery, with the car numbers and body side stripes in yellow and sponsor markings written in white. Team and driver names were also written in Japanese specifically for this race. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1/12 Honda Monkey 125
300014134€36.49
Article number: 300014134 Product: 1/12 Honda Monkey 125 This is a new entry into the famed 1/12 Motorcycle Series, as the all-new Honda Monkey 125 – which went on sale in mid-2018 – quickly joins the Tamiya line-up, too! The Monkey line was first sold in Japan in 1967, and soon gained long-lasting worldwide acclaim with its rather diminutive yet cheerful design. The Monkey 125 features a bigger 124cc engine, yet is packed with the Monkey’s trademark cheeky charm – chunky tires, rounded design motifs for headlight, speedo and more, plus gleaming chromed fenders and muffler cover. This playful little monkey looks set to be another worldwide hit, and now you can get your hands on it, in detailedTamiya 1/12! About the Model - This is a 1/12 scale plastic model assembly kit. Length: 142mm, width: 63mm, height: 86mm. - The compact, quirky form of the Monkey 125 is captured with superb accuracy. - Engine, swing arm, front fork and rear fender parts are secured to the frame using screws for a durable finish. - Metal-plated parts are used to depict fenders and light cases. - Depictions of the chunky tires are dedicated parts for this model. - Comes with clear parts, damper springs, vinyl tubing to recreate various lines, and of course decals to recreate markings.
Model motorcycle kits 1:12
1/12 Kawasaki Ninja H2 Carbon
300014136€52.99
Article number: 300014136 Product: 1/12 Kawasaki Ninja H2 Carbon Beast on the Streets 2014 was a vintage year for fans of Japanese motorcycle manufacturer Kawasaki as it saw the announcement of the Ninja H2 at the Milan Motorcycle Shows (EICMA), a bike whose name can be traced back to 1971 and the popular 750-SS/Mach IV (H2) street bike. In the modern H2, Kawasaki designers strove to provide hitherto unexperienced acceleration, and they certainly pulled out all the stops with a powerful combination of a 998cc inline-4 engine and centrifugal supercharger, mounted in an elegant trellis frame and providing an impressive 200hp. The body is also a work of aerodynamic art, with an upper cowl featuring ram air intakes and bottom chin spoiler plus a stylish single headlight. Mirrors have a cut-off design to ensure they contribute aerodynamically, and plenty of electronic rider aids are also on offer. The special Carbon spec of the Ninja H2 released in 2017 had carbon fiber upper cowl, an enhanced 205hp engine and many other upgrades. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 174mm, width: 76mm, height: 96mm. ★Features a realistic depiction of the inline-4 engine and supercharger. ★H2 road bike spec upper cowl with headlight and mirrors, side cowls and rear cowls really capture the bike's aerodynamics in style. ★Metal-plated parts are used to recreate muffler, light cases and more. ★Synthetic rubber tires are given authentic tread patterns. ★Cowls, engine and swingarm are attached to the frame via screws. ★The Kawasaki "river mark" logo is rendered beautifully by a metal transfer. ★Clear parts are employed for headlight and taillight sections. ★Masking stickers are included to aid with demarcation in the painting of the fuel tank.
Model car kits 1:24
1/24 Ford GT
300024346€53.99
Article number: 300024346 Product: 1/24 Ford GT Honed to Perfection Ford’s GT40 was a motorsports legend which dominated the prestigious 24 Hours of Le Mans race with four back-to-back victories between 1966 and 1969. Nearly 50 years on, and 2015 welcomed a newcomer with the legendary GT name, a revolutionary design upon which Ford have unleashed their passion for innovation: the Ford GT. It is based around a carbon fiber monocoque and endowed with a 647hp 3.5-liter EcoBoost V6 engine plus a 7-speed dual-clutch transmission, not to mention an aerodynamically-honed carbon fiber body: the result is a top speed of a cool 347km/h. A competition model took a magnificent class victory in the 2016 running of the 24 Hours of Le Mans. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 200mm, width; 94mm, height: 46mm. ★Refined aerodynamic form is captured with aplomb, with depictions of buttresses, door-side air tunnels and underside design. ★Body rear parts breakdown closely follows that of the actual car for super realism. ★Metal-plated wheels and oil tank depiction give an extra layer of realism. ★Shoulder sections and passenger seat dashboard are separate parts. ★Realistic soft resin tires. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1/24 Lotus Europa Special
300024358€45.99
Article number: 300024358 Product: 1/24 Lotus Europa Special This is a welcome first re-issue in ten years for our model of the Lotus Europa Special (previously Item 24212), with a number of updates to the kit. The Europa is a lightweight masterpiece of a sports car packed with features more likely seen on a racing car in its era: a sleek, low body, midship mounted engine and FRP frame components. Europas were manufactured between 1966 and 1972, and the Special was the final version of the car. It had a "big valve" 126hp 1,558cc four cylinder engine, five-speed transmission and alloy wheels. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 168mm, width: 73mm. • The honed Europa design and low body are authentically captured in 1/24 scale. • With the removal of the hood, the engine can be viewed even after completion. It features twin carburetor, 5- speed transmission, and shift linkage in the rear, plus new air funnels. • New parts are included for a rear wing and RS Watanabe option wheels. • Y-shaped backbone frame is molded together with rear radius arms as one piece. Front double wishbone suspension, stabilizer, rear upright, and engine are all attached onto this frame. • The floor is directly attached to the built up frame, and the body is mounted on top. • Features redesigned decals, plus new photo-etched parts (front grille) and seatbelt stickers. • A new instruction manual is planned. • A realistic cockpit sports instrument panel, high backed seats, 3-spoke steering wheel, and short gear shift. • Lotus logo, emblems and mirror surfaces are recreated by metal transfers.
Model car kits 1:24
1/24 Lotus Super 7 Series II
300024357€29.99
Article number: 300024357 Product: 1/24 Lotus Super 7 Series II The Super 7 is a legendary kit car that has spawned legions of fans since its release in 1957, and lives on today, manufactured by Caterham. Lotus developed and sold Seven cars first, however, and the souped up Super 7 version of the car was powered by a 4-cylinder 1.3-liter Ford Cosworth engine, achieving a top speed of over 160km/h. Simple yet effective designs such as rack and pinon steering and drum brakes made its assembly accessible to the home constructor. • This is a 1/24 scale plastic model assembly kit. Length: 139mm, width: 61mm. • The familiar, cosy form of the car is recreated in detail. • Features a realistic recreation of the Ford Cosworth engine under the opening hood. • Decals have been redesigned for this model, and also included are a new choice of seatbelt stickers. • C Parts are now molded in white for easier painting. • Choose whether to assemble as a road car, or a Clubman racer (with dedicated racing screens and roll bar). • Features a new instruction manual with updated 4-language cover story.
Model car kits 1:24
1/24 Mazda MX-5 RF
300024353€41.99
Article number: 300024353 Product: 1/24 Mazda MX-5 RF Tamiya is delighted to announce a new stablemate for the popular MX-5 (also known as the Miata MX-5 in the US and Roadster in Japan) model Item 24342! This kit recreates the RF model that was originally announced by Mazda in 2016: the initials stand for Retractable Fastback, as the car features a sleek fastback hard-top design with innovative retractable roof. In fact, the actual car's three-piece roof opens and closes in just thirteen seconds, and all at the push of a single button. It also features tweaks to its chassis and suspension to accommodate the heavier top section, while retaining all of Mazda’s vaunted safety features. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 164mm, width: 80mm. • The kit depicts the 2017 model MX-5 RF, complete with options available on top grade models in the Japan market such as Recaro seats, and BBS wheels. • Modelers can choose to assemble the kit as Japanese, US, UK or European market spec, and have the option of depicting the hard top up or down, thanks to new roof and rear/side window parts.
Military figures & Accessories 1:35
1/35 Africa Luftwaffe Art Crew
300035343€15.49
Article number: 300035343 Product: 1/35 DAK Luftwaffe Artillery Crew Increase your diorama options even further with this handy figure and accessory set. It contains parts which were previously only released as components of a larger kit in Items 35283 and 32408. They depict soldiers from an anti-aircraft artillery crew belonging to the Luftwaffe in Rommel’s famed Africa Corps. These men were usually assigned to an 88mm gun and in fact required to take on not only airborne targets but also heavily armored land vehicles such as the Matilda and M3 tanks. Technische Details: Detailed Plastic Kit of Model 1/35 Africa Luftwaffe Art Crew in Scale 1:35 Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 Brummbaer Late Production
300035353€56.99
Article number: 300035353 Product: 1/35 Brummbaer Late Production The Brummbär is a 15cm howitzer-toting assault tank (Sturmpanzer). It was built on the reliable and versatile Pz.Kpfw. IV chassis. It was ordered by Hitler himself, and produced in various incarnations from April 1943 to March 1945. The most numerous was the late production variant depicted by this model. It used the Pz.Kpfw. IV Ausf.J chassis and had a simplified boxy fighting compartment with an extrusion on the top-left to house a machine gun. In a losing battle, its dedicated Assault Tank Battalions fought in Hungary and the former Czechoslovakia. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 Ger.Pioneer & Goliath Set
300035357€19.29
Article number: 300035357 Product: 1/35 Ger.Pioneer & Goliath Set This 1/35 scale model recreates the Goliath. It was a diminutive tracked vehicle about 1.5m long that could carry up to 60kg of light explosives and was remotely controlled via 3 cables that spooled out of its rear. Some 7,564 were produced in all, split between 12V battery and gas engine-powered variants. They were largely deployed by assault pioneer (Sturmpionier) units, and were hoped to give the advantage of surprise. They were used on all fronts including German counters to the allied invasions in Normandy.
Military model vehicles 1:35
1/35 JGSDF Light Armored Veh.
300035368€46.99
Article number: 300035368 Product: 1/35 JGSDF Light Armored Veh. The latest kit to join the extensive 1/35 Military Miniature Series is this new kit of the Light Armored Vehicle, which recreates a domestic spec version of the vehicle such as that depicted in 1/48 by Item 32590 (previouslyreleased Item 35275 was an Iraq PKO spec vehicle). The Light Armored Vehicle is an integral part of Japan Ground Self-Defense Force (JGSDF) infantry units, key to the emphasis placed on mobility by recent policy changes. Around 1,900 in total have been provided to the JGSDF and the JASDF air arm. About the Model • This is a 1/35 scale plastic model assembly kit. Overall length: 128mm. • The unique form of the actual vehicle has been accurately replicated. • Features detailed synthetic rubber depictions of combat tires, transparent parts for headlights and tail lights, and a die-cast one-piece chassis for authentic weighty feel. • Assembly options include rooftop hatch in open or closed position, quadruple smoke dischargers (usually seen on command cars), and MINIMI machine gun. • A busy interior has recreations of seat, dashboard and accessories such as fire extinguisher. • Kit comes with seated driver figure depicted in the latest JGSDF body armor. • 3 marking options for vehicles with domestic JGSDF units are included.
Military model vehicles 1:35
1/35 M3 Stuart Late Production
300035360€40.99
Article number: 300035360 Product: 1:35 US M3 Stuart Späte Produktion This 1/35 scale model faithfully depicts the M3 Stuart tank. It is a complete new kit with updated details compared to the Stuart model that has been offered for decades. The M3 Stuart was manufactured from March 1943 onwards and deployed not only by U.S. forces; it also saw action in Soviet colors. The late production variant of the tank had a rounded turret design with the cupola removed. It used a 37mm main gun, with numerous 7.62mm machine guns: one coaxial to the main gun, one on the front, on the turret and in the side sponson’s on certain variants.
Military figures & Accessories 1:35
1/35 Sheridan Metal Barrel w/ PE-Parts
300012687€17.99
Article number: 300012687 Product: 1/35 Sheridan Metal Barrel w/ PE-Parts Add even more realism to your Vietnam War-era M551 Sheridan with this detailed set including precision gun barrel and photo-etched parts! • Aluminum Gun Barrel x1 • Photo-Etched Part Frets x2 • Turned aluminum depiction of the powerful 152mm gun/launcher barrel features very sharp detailing and no need for cleaning up of seams, etc. • Photo-etched parts recreate anti-RPG net and hull-top engine grilles for a superbly realistic finish. • Compatible with item 35365 US Airborne Tank M551 Sheridan.
Military model vehicles 1:35
1/35 Sherman Easy8 EuroTheater
300035346€52.99
Article number: 300035346 Product: 1/35 Sherman Easy8 EuroTheater This is an all-new kit designed by Tamiya's top designers which recreates the "Easy Eight" variant of the legendary Sherman medium tank. The M4A3E8 was known fondly as the "Easy Eight" by its crews, thanks to the relatively smooth drive afforded by its Horizontal Volute Spring Suspension (HVSS). Another distinguishing feature was its 76mm gun. Some of the 2,500 examples produced were in time to appear in the Battle of the Bulge (Dec. 1944-Jan. 1945), and others even served in the Korean War years after the Allied WWII triumph. Movie buffs will no doubt also recall that the "Easy Eight" was the star of the 2014 hit film "Fury." THE TAMIYA-DESIGNED M4A3E8 KEY FEATURES Slide molded turret and upper hull parts give an unbeatable combination of hassle-free assembly and highly realistic detail levels. Cast metal turret and welded hull surface textures are rendered accurately. The rear showcases sharp, detailed molding on engine grilles and exhausts, as well as the numerous accessories depicted by the kit. Clear parts are used to recreate light lens and cupola vision block parts, further upping the realism of this kit. The single-pin T66 tracks are recreated with minimum fuss and great accuracy, by the included belt-type tracks. Drive sprockets feature fine holes. A commander figure in realistic pose is provided for the cupola. The periscope seen on the hatch underside is depicted using separate parts. Technical data: Scale: 1/35 Length: 214 mm Width: 86 mm Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 US M10 Mid Production
300035350€52.99
Article number: 300035350 Product: 1/35 US M10 Mid Production This is a model of the famed M10 Tank Destroyer, a subject also covered in the 1/48 scale Military Miniature series. This largely newly-tooled model (only machine gun and clear parts are taken over from existing models) gives it the glorious detail of the larger 1/35 scale. The astonishing success of German armor tactics in 1940 prompted U.S. forces to adopt a doctrine requiring dedicated new tank destroyers to counter them. After going down a few different design routes at the start of the process, they eventually hit upon the highly successful M10 design with well-sloped (if rather thin, to keep the vehicle light and maneuverable) armor plate, and the highly capable 3-inch (76.2mm) gun. Over 4,900 were produced, and took part in Operation Torch (the invasion of N. Africa), as well as fighting in Italy and the advance upon Germany that would bring the exhausting conflict to a close. About the model 1/35 scale plastic model assembly kit. Length: 196mm, width: 88mm. Intensive study and measurement of the M10 in the tank museum at Saumur led to this highly detailed depiction of its form complete with sloped armor, right down to auxiliary armor bosses. The open top on the distinctive turret allows viewing of the 3-inch gun breech and realistic interior. Compare and contrast depictions of surface textures such as the cast mantlet and differential cover versus the welded armor plate of the turret sides and upper hull. Belt-type parts recreate T51 tracks. Driver's hatch can be attached in open or closed position, and features periscope depiction. Comes with 3 figures (commander, loader, gunner) in realistic pose, plus 2 marking options for recreating M10s belonging to the 601st and 634th U.S. Tank Destroyer Battalions Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1/35 Wespe Italian Front
300035358€42.99
Article number: 300035358 Product: 1:35 Panzerhaubitz Wespe Italien. Front This model faithfully recreates the German Self-Propelled Howitzer Wespe. It is a classic model from within the Tamiya catalogue, but this version includes updated parts and new marking options for vehicles that fought on the Italian front. Originally designed as a stopgap, with a production run of 676, this Pz.Kpfw.II chassis-based howitzer exceeded German expectations. Intended mainly for infantry support, the Pz.Kpfw.II’s moving turret was replaced with a boxy stationary superstructure equipped with the Type 18/2 10.5cm L/28 howitzer. While the crew of 5 were not blessed with overwhelming protection, their vehicle was a mobile threat to Allied forces nonetheless.
Military model vehicles 1:48
1/48 Churchill MkVII Crocodile
300032594€33.99
Article number: 300032594 Product: 1:48 Brit.Pz. Churchill Mk.VII Crocodile This is a 1/48 scale plastic assembly kit model of the British Tank Churchill Mk.VII Crocodile. The Churchill design was the result of a chastening experience for British forces in early WWII, a more modern design that could be produced quickly to make up for armor shortfalls after the Dunkirk evacuations. The Mk.VII variant was up-gunned with a 75mm gun and had improved armor up to 152mm thick! The Crocodile is one of the most notable "special" variants of the Churchill. It had an 80-plus meter range flamethrower in place of the front machine gun, towing its fuel and compressed nitrogen propellant in a trailer behind.
Military model vehicles 1:48
1/48 JGSDF Type 16 MCV
300032596€31.99
Article number: 300032596 Product: 1:48 JGSDF MCV Type 16 (8x8) (1) This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle intended to provide supporting fire and take on enemy armor as a part of rapid response units. Its domestically designed L/52 105mm rifled gun is a low-recoil piece with perforated muzzle brake and a fire control system to enable accurate firing on the move. Rolled steel turret and hull employ modular and spaced armor estimated to be able to survive frontal hits from 20-30mm class guns and portable anti-tank weapons. Thanks to its 570hp engine, the 26-ton Type 16 has a top speed of around 100km/h and significant range; it looks set to provide a major boost to JGSDF units as its rollout continues. • 1/48 scale plastic model assembly kit. Length: 176mm, width: 63mm. Model has a dedicated parts breakdown for a hassle-free build without sacrificing accuracy. • An accurate rendering is based upon extensive research of the actual Type 16, authentically capturing the modern silhouette with a moving depiction of the 105mm gun. • Features crisp molding on details such as non-slip surfaces, plus multi-piece machine gun and mount. • The 8-wheel suspension is depicted in style, with fixed wheels. Elastomer tires have a realistic tread pattern. • Decals are included to recreate periscope openings and muzzle brake perforations. • Comes with one commander figure and two marking options.
Military model vehicles 1:48
1/48 Panther Ausf.D
300032597€32.99
Article number: 300032597 Product: 1/48 Panther Ausf.D This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7.5cm gun, sloped armor for superior survivability, and excellent maneuverability. Around 840 Ausf.D Panthers were produced between January and September 1943. • 1/48 scale plastic model assembly kit. Length: 186mm, width: 73mm. • The refined design of the Panther Ausf.D is accurately captured, taking in the sloped armor and 7.5cm gun. • Cast mantlet texture and weld lines are depicted with high detail. • Die-cast hull. • Assembly type tracks feature one-piece straight sections. • Parts are included to recreate Schürzen side armor, and accessories like tool racks, gun cleaning rod case, smoke dischargers and more. • Commander torso figure included, plus two marking options for vehicles in the Battle of Kursk.
Model motorcycle kits 1:6
1/6 Link-Type Motorcycle Chain
300012674€44.99
Article number: 300012674 Product: 1/6 Link-Type Motorcycle Chain This assembly-type 1/6 scale chain is designed to go with the 1/6 scale Honda CRF1000L Africa Twin model kit. It promises to add an extra level of unbelievable detail to your masterpiece. •Includes individual assembly chain links consisting of individual plastic plates and metal spacers. •The completed chain will fit neatly onto the drive sprocket in Item 16042 Honda CRF1000L Africa Twin. •Includes a handy jig which aids construction. •Parts included in Item 16042 allow adjustment of the chain tension when it is fitted to the model.
Model aircraft kits 1:72
1/72 Bf-109 G-6 Messerschmitt
300060790€26.99
Article number: 300060790 Product: 1/72 Bf-109 G-6 Messerschmitt In great news for modelers in the compact 1/72 scale, the "Gustav" is to be released as a Tamiya kit! With over 30,000 produced, the Messerschmitt Bf109 is the most prolifically manufactured fighter in history; of its variants, the G-6 was the most numerous at 13,000 aircraft. In response to improving Allied foes in the air, Bf109 G aircraft had the more powerful DB605 engine, and from the G-6 were equipped with dual 13mm MG131 machine guns that required the distinctive bulges on either side of the cockpit cowling known as "Beule." Some were even given a 20mm cannon gondola under each wing for further improved firepower. The Bf109 G-6 was deployed on both the Western and Eastern fronts, in particular dominating Soviet adversaries as it continued in service through to the end of WWII. About the Model - This is a 1/72 scale plastic model assembly kit. - The striking, refined form of the G-6 variant Bf109 is captured, including depictions of the Beule bulges. - This product takes inspiration from the highly accurate 1/48 model (Item 61117). Please note that engine cowlings are depicted closed. - The cockpit is inserted after left and right fuselage halves have been put together. It has an accurate interior with streamlined assembly. - Canopy can be assembled in open or closed state. - Landing gear struts have a solid attachment point for accurate attachment angle and position. - Comes with optional drop tank parts. - 2 marking options are planned - JG51 (with distinctive eye marking on the Beule) and JG54. Detailed Plastic Kit
On-road RC cars (2WD/4WD)
1:10 RC 1000 TCR Berlina Corse (MB-01)
300058721€164.99
Article number: 300058721 Product: 1:10 RC 1000 TCR Berlina Corse (MB-01) Tamiya is delighted to announce that our M-chassis series welcomes a brand new chassis. The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any users, great 2WD performance and rigidity. The new MB-01 chassis continues that tradition, and allows six setups by choosing from three types of wheelbase, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600. The muscular form had front and rear over fenders, a large radiator cover integrated with the front bumper, and horizontally-opened engine hood. A 982cc inline-4 engine capable of over 110hp underpinned its powerful performance. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Alfa Rom. Giulia Spr. Club MB-01
300058732€164.99
Article number: 300058732 Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.
Off-road RC cars
1:10 RC AQROSHOT (DT-03T)
300058610€134.99
Article number: 300058610, Product: 1/10 RC AQROSHOT (DT-03T) In early 2014 Tamiya introduced the new DT-03 off-road chassis. For 2015 Tamiya introduces the DT-03T, which is a TRUCK variant. The platform is intended as an easy-to-get-started model to encourage young drivers to enter the world of R/C. Its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction. The truck variant allows users to tackle bumpy street or parking lot terrain with its taller stance and wide and low profile road hugging equipped tires. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC au TOM'S GR Supra (TT-02)
300058703€164.99
Article number: 300058703 Product: 1:10 RC au TOM'S GR Supra (TT-02) Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG." WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Audi Quattro A2 (TT-02)
300058667€154.99
Article number: 300058667 Product: 1:10 RC Audi Quattro A2 (TT-02) Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. It recreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributing to driver Hannu Mikkola’s eventual Drivers’ Championship. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. • The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Please note that light cases are compatible with separately sold LEDs; fog lamps are not. • 5-spoke wheels are molded in silver, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.
On-road RC cars (2WD/4WD)
1:10 RC Audi R8 LMS 2008 TT-02
300058749€169.99
Tamiya welcomes another racing car – this time, the Audi R8 LMS 2008 – paired with our popular TT- 02 chassis. Based upon the Audi sportscar R8 and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-liter V10 midship engine capable of over 500hp was mounted in a lightweight aluminum space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC BBX 2WD Buggy BB-01
300058719€339.99
Article number: 300058719 Product: 1:10 RC BBX 2WD Buggy BB-01 Tamiya is proud to announce a brand new 1/10 R/C 2WD off-road buggy model featuring the combination of classic design and modern performance. Its brand new chassis is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by the full-size UTVs. The new body is designed by famed Japanese artist Atsushi Arino. Included: 2WD assembly Kit, BB-01 Chassis, Polycarbonat body with driver, CVA oil dampers, oil filled diff, Monocoque chassis frame, ball bearings WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Off-road RC cars
1:10 RC Buggy Sand Scorcher 2010 2WD
300058452€394.99
Article number: 300058452 Product: 1:10 RC Buggy Sand Scorcher 2010 2WD Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you. Chassis layout: Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Citroen DS MB-01
300058734€154.99
Article number: 300058734 Product: 1:10 RC Citroen DS MB-01 Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknown cars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, user guide, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC ENEOS X PRIME GR Supra TT-02
300047514€164.99
Article number: 300047514 Product: 1:10 RC ENEOS X Prime GR Supra TT-02 Here is another 1/10 R/C model assembly kit based on our popular TT-02 chassis. The ENEOS X PRIME GR Supra of ROOKIE Racing with a prominent orange color scheme is one of six GR Supra cars taking part in the Super GT series GT500 class in 2024. The carbon fiber body inspired by the GR Supra street car has aerodynamic devices – which differ for each manufacturer – at the front and rear and on door undersides. Its 2-liter 4-cylinder turbo engine is capable of 550hp and powers the rear wheels. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC F104 PRO II w/Body
300058652€254.99
Article number: 300058652 Product: 1:10 RC F104 PRO II w/Body Power up your R/C formula racing life with this kit, which pairs the lightweight and streamlined direct drive F104 chassis with a new lower deck, and upgrade parts, giving a sharp and responsive drive. An all-new original body is also included! About the Model • This is a 1/10 R/C model assembly kit. Length: 440mm, width: 180mm, height: 88mm, wheelbase: 270mm. • The lightweight F104 chassis is fitted with various upgraded parts to turn it into the F104 PRO II. • FRP double deck chassis has a new lower deck design, and an inline (longitudinal) battery position. • The 1.5mm thick FRP T-bar design with U-shaped cutaway is inherited from the F104WGP. It makes up the rear suspension in concert with friction plates and a TRF damper. • Features front independent coil spring suspension. Alter camber by changing upper mount attachment direction. • Utilizes an aluminum ball differential. Rear wheels can be changed without its being dismantled. • A realistic original polycarbonate body is included. Its design is inspired by 2017 trends, with a sharp, slanting nose and bulging side pontoons. Additional parts are included to create alternative lower side pontoon sections as separate parts for chassis with larger R/C equipment. • Separate parts depict the complex front wing and its low rear counterpart, rear diffuser, mirrors, helmet, etc. • Comes with realistic semi-pneumatic synthetic rubber tires, and marking stickers to decorate the body. • A wide range of Hop-Up Option parts are available to further tune the chassis to your needs.
On-road RC cars (2WD/4WD)
1:10 RC Ford Escort Custom (TT-02)
300058691€154.99
Article number: 300058691 Product: 1:10 RC Ford Escort Custom (TT-02) • This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm. • Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing. • Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires. • Stickers and masking stickers for use in the paint job are also included. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Off-road RC cars
1:10 RC Ford Escort MkII Rally PB MF-01X
300058687€199.99
Article number: 300058687 Product: 1:10 RC Ford Escort MkII Rally PB MF-01X Rally cars are always an exciting subject, accomplished both on asphalt and flat dirt, and Tamiya is delighted to announce the addition of another to our R/C stable: the Ford Escort Mk.II Rally, depicting a car which was RAC Rally champion from 1975-1979. Fittingly, it is based upon the MF-01X chassis, which has dedicated rally parts and is at home on a range of surfaces. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 414mm, wheelbase: 239mm (L). • The classic Escort Mk.II form is breathtakingly recreated in polycarbonate, and pre-painted in White. Separately molded plastic components are included to recreate bumper, side mirrors and fog lamps. • Polycarbonate front and rear light cases are compatible with separately sold 5mm LEDs. • Stickers are included to recreate blue livery sections, sponsor logos and more. • The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension. • Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be converted to S and M wheelbases with separately sold propeller shafts. • A host of Hop-Up Option parts are available to tune the MF-01X chassis.
Off-road RC cars
1:10 RC Ford F-350 HighLift 4x4 3-Speed
300058372€559.99
Article number: 300058372 Product: 1/10 RC Ford F-350 HighLift 4x4 3-Speed Electric R/C assembly kit of one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Ford Focus RS Custom TT-02 paint
300047495€154.99
Article number: 300047495 Product: 1:10 RC Ford Focus RS Custom TT-02 Lack. Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Ford GT Mk.II 2020 (TT-02) PB
300058689€159.99
Article number: 300058689 Product: 1:10 RC Ford GT Mk.II 2020 (TT-02) PB • This is a 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. • The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. • Stickers are included to decorate the body, as are masking stickers for use in the paint job. • Twin five-spoke wheels are in line with the model’s racy look. • The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. • 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. • A wide range of Hop-Up Option parts is available to customize your chassis. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
Off-road RC cars
1:10 RC Golf MK2 GTI 16 Rally MF-01X
300058714€184.99
Article number: 300058714 Product: 1:10 RC Golf MK2 GTI 16 Rally MF-01X Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag. Included: 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Honda NSX 1998 Racing TT-02
300058739€159.99
Article number: 300058739 Product: 1:10 RC Honda NSX 1998 Racing TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Honda NSX Racing Whi PB TT-02
300047506€174.99
Article number: 300047506 Product: 1:10 RC Honda NSX Racing Whi PB TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the 1998 Honda NSX Racing! The NSX - a midship engine sports car released in 1990 – achieved success in races all over the world and also took part in Japanese GT car races from 1996. The 1998 version employed a 3.5-liter V6 engine, and featured improved aerodynamics, low center of gravity, improved brake system and easier maintenance. Four cars were raced that year and achieved five victories. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat Body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Hornet EVO.
300058742€209.99
Article number: 300058742 Product: 1:10 RC Hornet EVO. This year is the 40th anniversary of the original Hornet’s release. To commemorate this anniversary, we are releasing a new version of the Hornet: 1/10 R/C Hornet EVO. You can see the differences between Items 58336 and this model (58742) in the suspension, rear gearbox, bearing and dampers. 2WD assembly kit, ESC included, Type 540 Motor, clear Polycarbonat-body, Ball bearings, CVA Damper, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Hotshot II (2024) 4WD
300058737€229.99
Article number: 300058737 Product: 1:10 RC Hotshot II (2024) 4WD Tamiya welcomes a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987, following Tamiya’s first 4WD buggy Item 58047 Hotshot released in 1985 and Item 58054 Supershot released in 1986. The Hotshot II was a lightweight design thanks to its use of plastic parts. Why not get this nostalgic buggy kit in addition to Item 58695 1/10 R/C Wild One Off-Roader Blockhead Motors? Including ESC. 4WD assembly kit, Vintage Model, ESC included, Type 540 Motor, pre-painted Polycarbonat-body, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:10 RC Hotshot II Blockhead Motors
300058710€269.99
Article number: 300058710 Product: 1:10 RC Hotshot II Blockhead Motors Tamiya welcomes back Item 58062 1/10 R/C Hotshot II - originally released in 1987 - with a twist! The Hotshot II is one of the earliest 4WD buggy models and this had not been re-released until today. Following Item 58695 (1/10 R/C Wild One Off-Roader Blockhead Motors), this is the second model of our Jun Watanabe R/C buggy re-releases. This model is the 4WD buggy based on Item 58062, and the sticker is designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS'' which deals in stickers and apparel, and customizations of Tamiya off road buggy models from the 1980s, also taking part in the design of collaborative fashion, music, and skateboard projects to expand the horizons of R/C cars. Included: 4WD Kit, Blockhead Design, 540er Motor, Electric ESC, pre-painted Body, User Guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Impreza Mexico '04 (TT-01E)
300047372€144.99
Article number: 300047372 Product: 1:10 RC Impreza Mexico '04 (TT-01E) This is a re-issue for the classic Subaru rally body and TT-01 Type-E chassis combination, last produced in 2018! The WRC 2004 rally season saw major rule changes governing aspects such as body design, engine, suspension and more; Subaru would narrowly miss out on the Drivers’ Championship, with star driver Petter Solberg finishing in second to Sébastien Loeb. In the Rally Mexico, third race of the calendar, Solberg set fastest times on 9 of 15 stages but a 5’40" penalty would push him back to an eventual 4th place finish. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 441mm, width: 185mm. • The Impreza from the 2004 Rally Mexico is expertly depicted in durable polycarbonate, with separate molded mirror and wing parts. • Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc. • Dish wheels are molded in gold, and paired with tread pattern racing radial tires. • The TT-01 Type-E chassis features a shaft-driven 4WD system to offer easy handling and great customizability. • A wide range of Hop-Up Options is available to tune the TT-01 Type-E chassis. • Click here to see the item on the official Tamiya homepage. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Lancia 037 Rally (TA02-S)
300058654€234.99
Article number: 300058654 Product: 1:10 RC Lancia 037 Rally (TA02-S) Tamiya is delighted to announce the release of this model, which sees the classic Lancia 037 Rally body (previously used in Items 58040 and 58278) paired with the evergreen TA02 chassis' short wheelbase variant. The 037 Rally was Lancia's 1983 Group B WRC offering and took a 1-2 at the Monte-Carlo Rally as it romped to that year's manufacturers' championship. Its dashing body design was the work of the renowned artists at Pininfarina, and the highly distinctive shell retains popularity even today. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 422mm, width: 186mm, height: 132mm. • The injection molded body offers a highly realistic recreation of the 037 form, and comes with metal-plated light cases for headlights, taillights and fog lamps. Side mirrors and windshield wipers are separate parts. • The interior features a piece including depictions of driver & co-driver, plus dashboard. • The TA02S chassis is a shaft-driven 4WD unit with bathtub frame, a rear ball diff and front gear diff. • Four-wheel independent double-wishbone suspension is paired with CVA oil dampers. • The front bumper and sticker sheet are newly-produced for this model. • Compatible with standard Type 540 motors.
On-road RC cars (2WD/4WD)
1:10 RC Lancia Delta HF Integrale TT-02
300058570€169.99
Article number: 300058570 Product: 1:10 RC Lancia Delta HF Integrale TT-02 The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities. About the Model • This is a 1/10 scale R/C assembly kit. • Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION. • The model’s polycarbonate body accurately recreates that of the real rally car. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • Rally Block tires are fitted to stylish white wheels. • Type 540 Motor included. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:10 RC LandRover Defender 90 CC-02
300058700€294.99
Article number: 300058700 Product: 1:10 RC LandRover Defender 90 CC-02 Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC M-07 Concept Chassis Kit
300058647€194.99
Article number: 300058647 Product: 1:10 RC M-07 Concept Chassis Kit This high-performance front-wheel drive R/C chassis assembly kit is constructed around a rigid monocoque with lower deck and upper frame sections. It offers responsive drive characteristics and fuss-free maintenance of parts such as the easy-access differential, which can be removed from the underside with minimal disassembly. C.V.A. (Constant Volume Adjustable) oil shock-damped 4-wheel double wishbone suspension features dedicated long arms and steering linkage components for a range of setup options. A silky-smooth drivetrain utilizes full ball bearings, oil-filled gear differential unit and universal drive shafts. It can be assembled with a 225mm (M) or 239mm (L) wheelbase, making it compatible with appropriately-sized existing Tamiya M-chassis body parts sets. • 1/10 scale R/C chassis assembly kit. Length: 332mm, width: 164mm. • The core of the chassis is a 1-piece monocoque with integrated upper frame elements similar to the TA-07 Pro. It is designed to offer excellent rigidity with easy maintenance. • Choose between 2 different wheelbases (M: 225mm, L: 239mm), simply by changing rear arm attachment direction. • Newly designed front and rear suspension use long arms for ideal leverage ratio, in tandem with long steering linkage components. Rear toe can be adjusted simply using spacers. • 4-wheel double wishbone suspension is fitted with CVA oil shocks. • The TA06 oil-filled gear differential is used to drive the M-07. It is paired with universal drive shafts and full ball bearings. • Compatible with standard IFMAR (Li-Po cell-type) regulation square-shaped battery packs. • Compatible with Low-Profile servos. • The chassis was designed with easy access to the stabilizers (sold separately) for quick, precise adjustments vital at the racetrack. • Body mounts have a new reinforced design for more secure body attachment. • The chassis gives its driver excellent "feedback," allowing you to judge with clarity how your setup changes have impact. Scope of delivery: Kit for M-07 chassis, instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC MB 190E debis Zakspeed TT-01E
300058656€159.99
Art.No .: 300058656 Item description: 1:10 RC MB 190E debis Zakspeed TT-01E The Mercedes-Benz 190E in the version "debis" drove in the 90s in the German DTM racing series. The 1/10 scale TAMIYA model on the TT-01E chassis has a powerful torque-tuned electric motor and four-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body including decal sheet and the electronic speed controller are perfect for RC hobbyists. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:10 RC MB G-Class G500 (CC-02)
300058675€294.99
Article number: 300058675 Product: 1:10 RC MB G-Class G500 (CC-02) Get ready for a newcomer to the Tamiya off-road chassis line-up – the CC-02 is here! Even better, its first model comes with a brand new body that depicts the Mercedes-Benz G 500, a 2018 addition to the German auto giant's legendary G Class that was powered by a 4-liter V8 twin turbo engine. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 455mm, width: 196mm, height: 207mm. Wheelbase: 267mm. • TLU-01 LED Light Unit and LEDs are included for export only! LED attachment parts are also included. • The boxy form of the G 500 is recreated accurately in polycarbonate, with separately molded parts included for the front grille, side mirrors and spare tire cover. • Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. • A 4WD setup employs the motor longitudinally behind the front axle, with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. • Twenty gear ratios between 11.09:1 and 29.28:1 are possible using separately sold pinion gears, for some serious fine-tuning! • 4-link rigid suspension is employed front and rear, with CVA oil dampers. See over the page for a more detailed introduction to the CC-02!
On-road RC cars (2WD/4WD)
1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E
300058638€159.99
Article number: 300058638 Product: 1:10 RC MB190 E Evo.2 Zakspeed DA TT-01E This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany. Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance. The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Mercedes-AMG GT3 (TT-02)
300058639€159.99
Article number: 300058639 Product: 1:10 RC Mercedes-AMG GT3 (TT-02) Tamiya continue to expand our range of kits on the entry level TT-02 with this stunning new release. It depicts the fabulous body of the Mercedes-AMG GT3 car, which was created for the GT3 class of racing from 2016 onwards. The 6.3-liter V8 powered car has quickly become a modern legend with race results like a clean sweep of the top 4 in a 2016 Nürburgring 24-hour race. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 453mm. • The luxurious, powerful form of the Mercedes-AMG GT3 is recreated in polycarbonate. • Separately molded parts are included in the kit to recreate side mirrors and the distinctive rear wing. • PS-63 Bright Gun Metal (Item 86063) is a new Tamiya Color spray for polycarbonate, formulated especially for this model. It recreates the standard works color (requires a coat of PS-55 Flat Clear on outside of body). • The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis. • Comes with the 12-spoke wheels used in Item 58619. • Stickers are included to recreate the markings of the car, as are masking stickers for use when painting. • An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. • Please note that R/C equipment and battery pack are separately required. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Mitsubishi Lancer Evo V (TT-02)
300058713€154.99
Article number: 300058713 Product: 1:10 RC Mitsubishi Lancer Evo V (TT-02) Tamiya is proud to announce the release of the Mitsubishi Lancer Evolution V as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The Mitsubishi Lancer Evolution 5th generation model took part in global rally races in 1998 and achieved both Maker’s and Driver’s Championships. This car featured a powerful body with bulging fenders, louvers and air intakes on the hood, and rear wing. This kit depicts it as a road car. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Monster Beetle (2015)
300058618€234.99
Article number: 300058618 Product: 1:10 RC Monster Beetle (2015) Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike! About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm. • The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings. • The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers. • Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust. • A large dust cover is included to protect the vital R/C equipment. • The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels. • Includes a driver figure. Included: Assembly kit with pictured user guide, Tamiya ESC (capable of running brushed and brushless motors), electric motor type 540, ABS body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Motul Autech Z 2023 TT-02
300058735€159.99
Article number: 300058735 Product: 1:10 RC Motul Autech Z 2023 TT-02 Tamiya welcomes another release on our popular TT-02 chassis; this time, the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is very different, with a carbon fiber body and a front 550hp-plus 2-liter 4-cylinder single turbo engine. It got off to a great start, winning the opening race of 2023 in Okayama. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Opel Calibra V6 Cliff (TT-01E)
300058701€149.99
Article number: 300058701 Product: 1:10 RC Opel Calibra V6 Cliff (TT-01E) Tamiya welcomes the Opel Calibra V6 Cliff R/C model based upon the TT-01 Type-E chassis. The Opel Calibra V6 Cliff took part in the 1995 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing with the driver JJ. Lehto, the car was powered by a 2.5-liter V6 engine capable of 420 hp. The distinctive, overall black body with the Cliff logo caught people’s eye, and this car showed off strength in the races. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Opel Kadett GT/E Rally MB-01
300058729€154.99
Article number: 300058729 Product: 1:10 RC Opel Kadett GT/E Rally MB-01 Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races. 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases, Manual, clear polycarbonat body WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Peugeot 306 Maxi BT-01
300058746€184.99
Here is another R/C kit paired with the 2WD BT-01 chassis which offers choices of FF/MR/FR drive system; this time, a standard wheelbase, front motor / front wheel drive (FF) setup with the body which recreates the Peugeot 306 Maxi. Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally-aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally in Monte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Porsche 911 Carrera RSR (TT-02)
300058571€164.99
Article number: 300058571 Product: 1:10 RC Porsche 911 Carrera RSR (TT-02) The Porsche 911 Carrera RSR joins the rapidly-expanding TT-02 chassis line-up. It is a legendary Group 4 car which had a body weighing just 900kg with a 300hp-plus horizontally opposed 6-cylinder engine, and still holds a place in fans’ hearts today thanks to its exploits with racing teams the world over. In 1973, the year of its release, it won the European GT Championship, plus the renowned 24 Hours of Daytona and 12 Hours of Sebring races. The works prototype in predominantly silver livery with the Martini stripe also took the checkered flag in the famed Targa Florio race. About the Model • This is a 1/10 scale R/C assembly kit. • The model’s polycarbonate body accurately recreates that of the real car. Rear wing is integrated with body. • Separate parts are included to depict side mirror. • The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis. • A wide range of option parts are becoming available to tune and customize TT-02 chassis machines. • The kit includes decorative and masking stickers. • EXPORT VERSION ONLY includes RS-540 Torque-Tuned Motor. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Porsche Carrera RSR 2.8 BT-01
300058740€179.99
Article number: 300058740 Product: 1:10 RC Porsche Carrera RSR 2.8 BT-01 The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polycarbonat-body, shaft driven, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Porsche Carrera RSR 2.8 La.BT-01
300047507€199.99
The 2WD BT-01 chassis – which offers choices of FF/MR/FR drive system – welcomes another R/C kit; this time, a short wheelbase, midship rear motor / rear wheel drive (MR) setup with the body which recreates the Porsche 911 Carrera RSR 2.8. The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. The Body is Pre-Painted in PS-1 White and PS-31 Smoke (Windows). 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Motor, Polyacarbonate body prepainted, Manual. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Renault Alpine A110 Jaeger M-06
300058708€164.99
Article number: 300058708 Product: 1:10 RC Renault Alpine A110 Jaeger M-06 Tamiya is proud to add a new version of the Alpine A110 with an orange Jägermeister livery to our M-06 chassis series. The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first World Rally champion and its Jägermeister orange livery version achieved a class victory in German circuit races. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Skyline GT-R (R32) (TT-02D)
300058651€234.99
Article number: 300058651 Product: 1:10 RC Skyline GT-R (R32) (TT-02D) Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 452mm. • LEDs are included in export versions of the kit only. • The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428). • Separately molded parts are included in the kit to recreate side mirrors and rear wing. • Features marking stickers to decorate the car. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts. • Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TA08 PRO Chassis Kit
300058693€349.99
Article number: 300058693 Product: 1:10 RC TA08 PRO Chassis Kit • This is a 1/10 scale R/C touring car chassis kit. • Features Stepped-V shaped chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact and facilitate optimum weight distribution. • Positioning spur gear in front of motor produces stable drivability. • 2 belt-driven 4WD uses TRF420 gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size dampers. Universal shafts and full bearings give efficient drive. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. • Please note that the R/C equipment, motor, battery pack, tires and body are sold separately Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Toyo. Ce.GT-Four ST205 blk.TT-02
300047510€174.99
Tamiya welcomes this limited edition version of Item 58743 1/10 R/C Toyota Celica GT-FOUR (ST205) (TT-02) with the polycarbonate body pre-painted in Black (PS-5) with Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat Body. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyo. Celica GT-Four ST205 TT-02
300058743€159.99
Article number: 300058743 Product: 1:10 RC Toyo. Celica GT-Four ST205 TT-02 Tamiya welcomes another classic racing car – this time, the Toyota Celica GT-FOUR (ST205) – paired with our popular TT-02 chassis. Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. It possessed curved, aerodynamic body lines, a distinctive front with four headlights of different sizes, and a 2-liter 4-cylinder DOHC turbo engine capable of 255hp. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior traction. Also, 2,100 Japanese models featuring an arched rear spoiler were produced to the acclaim of Celica fans. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyo. Celica GT-Four TT-02 paint
300047500€154.99
Article number: 300047500 Product: 1:10 RC Toyo. Celica GT-Four TT-02 paint Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyo. Celica GT-Four TT-02 ST185
300058730€154.99
Article number: 300058730 Product: 1:10 RC Toyo. Celica GT-Four TT-02 ST185 Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time. 4WD assembly kit, TT-02 Chassis, ESC included, Type 540 Torque- Tuned Motor, Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyota Supra (JZA80) BT-01 paint
300047505€184.99
Article number: 300047505 Product: 1:10 RC Toyota Supra (JZA80) BT-01 paint The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. (Six setups are available in total.) 2WD assembly kit, BT-01 Chassis, multi-motor-positions, ESC included, Type 540 Torque- Tuned Motor, pre-painted Polycarbonat-body, shaft driven, user guide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC Toyota Supra Drift Spec TT-02D
300058613€194.99
Article number: 300058613 Product: 1/10 R/C Toyota Supra (TT-02D) Drift Spec One of the most recognized Japanese sports cars around the world, the Supra has left its mark both on the race track in the hands of pro drivers and on the streets in the hands of enthusiasts. Now, the Tamiya model (original release: Item 58392) is given a new release on the new Tamiya drift unit, the TT-02D chassis. About the Model • This is a 1/10 scale R/C model assembly kit. • The aggressive form is captured faithfully by the polycarbonate body. • Features separately-molded side mirror and rear wing parts. • Includes carbon pattern decals for engine hood and rear wing. • The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. • Features 24mm width drift-spec tires on metal-plated mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. • The body was originally used on Item 58392. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC TT-02BR Chassis Kit Buggy
300058717€339.99
Article number: 300058710 Product: 1:10 RC TT-02BR Chassis Kit Buggy Tamiya is delighted to announce the release of the TT-02BR chassis in the TT-02B series which is popular among off-road racers. The TT-02BR chassis is an upgraded version of the TT-02B chassis kit with a wealth of parts, plus new aluminum propller joints and carbon fiber damper stays to ensure range of setup adjustments. Included Hop-up Option Parts Aluminum propeller joints *New! / Carbon fiber damper stays *New! Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 54501: TT-02 Aluminum Propeller Shaft Item 54768: 06 Module Hard Coated Aluminum Pinion Gear (17T) Item 54993: TT-02B/DF-03 Aluminum Damper Set Item 53793: DF-02 Two-Way Aluminum Rear Uprights Item 54539: TT-02B Full Turnbuckle Set Item 53791: DF-02 Assembly Universal Shaft Item 53880: Large Dish Wheels (4WD/Front, 62/25) Item 53881: Large Dish Wheels (Rear, 62/35) Item 54211: TRF201 Rear Wing Set Item 54815: TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.) Item 54926: TT-02 Lower Deck (Hard/Black) Included: 4WD assembly Kit, TT-02B Chassis, full ball bearings, 540er Torque-Tuned Motor, including Option Parts, Polycarbonat-body, Shaft driven, doubble wishbone suspension, Spike-tires, tube frame chassis, userguide WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC Volkswagen Beetle (M-06)
300058572€189.99
Article number: 300058572 Product: 1:10 RC Volkswagen Beetle (M-06) The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis. About the Item • This is a 1/10 scale R/C assembly kit. • The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism. • Metal-plated wheels also included. • The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC VW Golf II GTI 16V MB-01
300058748€164.99
Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). The FF drivetrain Golf is one of Volkswagen’s most iconic cars. From its first appearance in 1974, the Volkswagen Golf has continued to develop and lead the worldwide compact car class. In 1986, the Golf II GTI 16V was added to the second-generation model Golf II lineup which had made its debut in 1983. With a 1,781cc inline-4 DOHC 16-valve engine, a tuned car took part in global rally races, in 1986 becoming class champion. Required accessories (not included): RC System with Receiver, Servo; 7.2V NiMH Battery Pack, Charger, Paints for Polycarbonat Body (Tamiya PS-XX). 2WD assembly Kit, MB-01 Chassis, Electronic speed controller, 540 motor, Double wishbone, 3 wheelbases. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:10 RC VW Karmann Ghia (M-06)
300058677€174.99
Article number: 300058677 Product: 1:10 RC VW Karmann Ghia (M-06) The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. • The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and masking stickers for use during the paint job. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
On-road RC cars (2WD/4WD)
1:10 RC VW Type 2 (T1) (M-06)
300058668€184.99
Article number: 300058668 Product: 1:10 RC VW Type 2 (T1) (M-06) This new R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic drive just like the real RR Type 2 T1. About the Model • This is a 1/10 scale R/C model assembly kit. • The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate, with separate molded plastic parts included to create bumper, light cases and side mirrors. • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. • This model utilizes the 239mm wheelbase M-06L chassis. • Stylish metal-plated dish type wheels make for a great look. • A host of Hop-Up Option parts are available to customize the chassis to your driving needs.
On-road RC cars (2WD/4WD)
1:10 RC XM -01 Pro Chassis Kit
300058738€294.99
Article number: 300058738 Product: 1:10 RC XM -01 Pro Chassis Kit This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection! Compatible Hop-Up Option Parts for XM-01 Chassis (NOT included!) 22046: XV-02/TT-02 Ball Differential Set (39T) 22047: XV-02/TT-02 Front Direct Coupling Set (39T) 22048: XV-02 Slipper Clutch Set 22049: XV-02/TT-02 Oil Gear Differential Unit 22050: 06 Module Spur Gear (70T) for XV-02 Gear Differential (Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit.) 22053: XV-02 Aluminum Spur Gear Holder 22055: XV-02 Aluminum Adjustable Suspension Mount (XH) 22056: XV-02 Aluminum Damper Stay Mount 22064: TT-02 Type-SRX Front Direct Cup Joints (Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) or Item 22047 XV-02/TT-02 Front Direct Coupling Set (39T).) 22072: XV-02 Aluminum Steering Arms (L/R) 54802: TB-05 Aluminum Steering Bridge 54884: Aluminum Adjustable Separate Suspension Mounts (A) 4WD assembly kit, XM-01 Chassis, 3-different WB, Chassis-Cover, many Hop-Up parts included, Manual WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Ducati 1199 Panigale S
300014129€54.99
Article number: 300014129 Product: 1/12 Ducati 1199 Panigale S Tamiya has expanded its 1/12 scale motorcycle model series with this all new model of the Ducati 1199 Panigale S. The Ducati 1199 Panigale, which was the base for the bike depicted by this model, was announced at the 2011 Milan Motor Show. It is a breathtaking fusion of beautiful looks and cutting-edge technology, featuring a newly-designed engine, monocoque frame with air box and much more. The 1199 Panigale S features upgrades to its suspension, wheels, lights and other parts for an enhanced riding experience. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Ducati 1199 Panigale S Tricolore
300114132€53.99
Article number: 300114132 Product: 1:12 Ducati 1199 Panigale S Tricolore This scale model assembly kit depicts the Tricolore version of the thoroughbred Ducati 1199 Panigale S. As its name suggests, the Tricolore came in a 3-color scheme: red, white, and green to match the colors of the famous tricolore italiano national flag, in commemoration of the 150th anniversary of Italian reunification. It shared most of the base bike’s revolutionary design, including the 1,198cc L-Twin engine integrated into the monocoque frame and directly connected to the swing arm, damper unit, and so on.
Model motorcycle kits 1:12
1:12 Ducati 888 Superbike ´93
300014063€34.99
Article number: 300014063 Product: 1:12 Ducati 888 Superbike ´93 About the Ducati 888 Superbike Racer On the 26th of September 1993, a young and inspiring motorcycle racer named Tetsuya Harada was adding the final touches to his machine at the Jarama racing circuit, just prior tot he last round of the season. This would make him the first Japanese World Champion since 1977. His closest rival, Loris Capirossi, was ahead in point standings going into this last race, but bad luck plagued him during the dynamic battle for the 250cc GP2 title. Although this was Harada's debut season for the World Grand Prix, he had been working closely with Yamaha for the last couple of seasons, perfecting the works TZM bike, which allowed him to win the 1992 All Japan Championship title. The 1993 Yamaha TZ250M used a 249cc liquid cooled V-twin cylinder engine capable of 94 horsepower. Its crankcase reed valve induction system was combined with an electronically controlled exhaust valve system. The highly sophisticated six-speed gear box used an electronic cut-out gear changing system that eliminated clutch operation and minimized racing stresses. This awesome powerplant was mounted on Yamaha's exceptionally rigid twin-spar box-section aluminum frame that was capable of head angle adjustments. The rear suspension was also of box-sectioned aluminum to withstand the enormous power and traction. The bike rides on Marchesini cast magnesium wheels matched to Dunlop radial tires. The superb stopping power was achieved by front Brembo and rear Nissin Brake systems.
Model motorcycle kits 1:12
1:12 Ducati Desmosedici #65 MotoGP´03
300014101€50.99
Article number: 300014101 Product: 1:12 Ducati Desmosedici #65 MotoGP´03 About the Model Detailed 1/12 assembly model kit of the 2004 Ducati Desmosedici ★Model accurately depicts trademark Ducati style, such as truss-frame and V4 engine with rear suspension swing arm directly attached to crank case. ★Accelerator, clutch and brake wiring masterfully depicted with plastic tubing. ★Synthetic rubber tires look and feel like authentic racing slick tires ★Side and seat cowling can be removed after assembly allowing full display of engine ★Due to sponsor's request, white marking decals are not included with this kit. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Fig. Street Rider
300014137€18.29
Article number: 300014137 Product: 1:12 Fig. Street Rider The 1/12 Motorcycle Series welcomes a brand new, original figure in the form of the Street Rider, a male figure in casual bike gear which is perfectly suited to display with our models in the series, particularly street bikes. It features a number of options with regard to helmet, pose and eyewear. Take this chance to make a little diorama from your latest motorcycle masterpiece! About the Model • This is a 1/12 scale plastic model assembly kit. • The latest 3D scanning techniques ensure that this is a finely molded figure with excellent detail including natural rendering of folds and creases on the clothing. • Included are parts to make either of two different options: i) the rider helmeted and pulling on his gloves, ready to mount the bike; or ii) the rider having just got off the bike, helmet in hand and with a wooly hat on his head. • Features parts to create either half or three-quarter helmet. • Optional sunglasses and helmet visor are also included. • Comes with a screw-affixed base for stable display. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Front Fork Set CBR1000RR-R Fireb.
300012690€30.49
Article number: 300012690 Product: 1:12 Front Fork Set CBR1000RR-R Fireb. ★Make your model even more astounding with this Detail-Up parts set! ★It includes gold color anodized aluminum fork outer tubes and reservoirs, gold color plated brass fork inner tubes, yellow coil spring, plastic fork bottoms and more. Front Fork Kit model, scale 1:12, Aluminum immersion tube and com- pensating holder anodized, mounting material, Instructions, Suitable for 300014138.
Model motorcycle kits 1:12
1:12 Honda CBR 1000-RR-R Fireblade SP
300014138€52.99
Article number: 300014138 Product: 1:12 Honda CBR 1000-RR-R Fireblade SP The Complete Package Announced in 2019, the CBR1000RR-R FIREBLADE SP is a stunning triumph of motorcycle design with a highly circuit-oriented feel, yet providing an accessible ride to road-going owners. There is plenty of race technology borrowed from the RC213V MotoGP bike, a class-leading 217.5hp engine, and state of the art electronics that assist with many aspects of the bike including its suspension. It is adorned with aerodynamic honed cowls, highlighted by triple interior fairing winglets in the side cowls. The Honda works Team HRC is planning to enter the 2020 SBK championship using a bike based upon this masterpiece. About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 176mm, width: 68mm, height: 96mm. ★The aerodynamically honed form of the bike is captured in style, including renderings of the internal winglets in the side cowls. ★Features a detailed depiction of the class leading liquid cooled 4-cylinder engine.
Model motorcycle kits 1:12
1:12 Honda CBR110XX Super Blackbird
300014070€38.49
Article number: 300014070 Product: 1:12 Honda CBR110XX Super Blackbird Capable of hitting speeds in excess of 300km/h is the 1996 released super sports Honda CBR1100XX, which now comes accurately reproduced as a plastic assembly model kit. ★The individualistic aerodynamic form of the CBR's cowling and the high performance liquid-cooled inline 4-cylinder engine, frame, and suspension, have all been precisely modeled. ★The engine and cowling can be attached to the frame with small screws allowing you to further understand the mechanics of the motorcycle. ★Parts such as the dual headlight case, exhaust, and front forks are depicted with metal plated parts to provide the model with greater realism. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Honda NSR500 '84
300014121€67.99
Article number: 300014121 Product: 1/12 Honda NSR500 '84 During the 1983 World Grand Prix season, Honda took the championship with the NS500 but it was clear that the power from the 2-stroke V3 engine would be insufficient for the next season. This led Honda to create the NSR500, which was powered by a more powerful V4 engine. It also featured a unique aluminum frame to house the engine and a radical layout in which the expansion chambers and the fuel tank were positioned above and below the engine respectively. The 1984 season was challenging but the following season saw the NSR500 demonstrate its excellent performance to win the championship. Technical data: Length: 166 mm Width: 52 mm
Model motorcycle kits 1:12
1:12 Kawasaki Ninja ZX-RR #55 2006
300014109€56.99
Article number: 300014109 Product: 1/12 Kawasaki Ninja ZX-RR #55 2006 The Ninja ZX-RR was Kawasaki's first MotoGP machine equipped with a 4-stroke engine, and after overcoming initial teething problems, began to show its potential. With the addition of rider Shinya Nakano in 2004, the team kept improving and became capable of challenging the top teams for race honors. Nakano rode the lime-green, 990cc-engined machine to a second place podium finish at Round 8 in the Netherlands for his best finish of the 2006 MotoGP season. Features: Cowlings can be attached/detached using precison-made screws to showcase accurately reproduced internal details. Rear suspension feature realistic nut fastener. Wrench tool is conveniently included to aid assembly. Brilliant livery can be recreated using Tamiya paints (Light Green & Semi Gloss Black), with sponsor logos provided by beautiful Cartograf decals. Synthetic rubber racing slick tires with Bridgestone markings provide an authentic race feel. Markings for both Shinya Nakano's No.56 and Randy de Puniet's No.17 included Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre.
300014111€56.99
Article number: 300014111 Product: 1:12 Kawasaki ZZR 1400 Ninja/ZX-14 Stre. When Kawasaki announced the ZZR1400 it continued their tradition of producing the strongest bike in the hyper sport category. It attracted much attention due to its impressive design and specifications. The ZZR1400 had such a great road presence and strong character, that it exceeded expected sales forecasts. In America it was given the official name "ZX-14" but is more widely recognized by its nickname "Ninja". The ZX-14 is currently known as the world's most powerful sports motorcycle. The motorcycle also featured a tandem seat fairing and an under diffuser. In addition to the standard coloring, a fire pattern livery was given to the American market for special use. Warning! Not suitable for children under 14 years.
Off-road RC cars
1:12 RC Lunch Box Black Edition
300058546€164.99
Article number: 300058546 Product: 1:12 RC Lunch Box Black Edition If you want to have cool wheelie fun, grab the TAMIYA Lunch Box Black Edition and do fat wheelies thanks to the wheelie bar. The original model appeared in 1987 as a monster that knows no bounds. The current reissue of TAMIYA in the Black Edition is equipped with a black colored ABS body and black rims. Chrome-plated components such as the radiator grille and bumper round off the look. 2-channel RC system with servo, 7.2 V battery pack & charger sold separately. Numerous optional tuning parts available. Scope of delivery: Kit model with detailed illustrated assembly instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC buggys (2WD/4WD)
1:12 RC X-SA Midnight Pumkin
300046705€209.99
Article number: 300046705 Product: 1:12 RC X-SA Midnight Pumpkin Here is a new entry to the X-SA series of models, and yet another Tamiya classic: the Midnight Pumpkin. This is a finished model of the Midnight Pumpkin (as it appeared in Item 58547); all you require to get going with this adaptable, lightweight and beginner-friendly 2WD monster is your own transmitter, receiver, servo and a power source! Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Suzuki GSX1300R Hayabusa Street ´98
300014090€42.99
Article number: 300014090 Product: 1:12 Suzuki GSX1300R Hayabusa Street ´98 About the Suzuki Hayabusa 1300 (GSX1300R) In 1998, the Suzuki Hayabusa 1300 (GSX1300R) was quite the sensation during its debut at the "INTERMOTO 98" show in Germany. The Hayabusa is equipped with a 175hp in line 4-cylinder 4 DOHC valve water-cooled engine. To ensure good airflow to the ram air duct, a unique cowling design with vertically positioned twin headlights was adopted. The Hayabusa also realizes quick and powerful acceleration and performs excellent curving as well as effective braking. For expert and average level riders alike the cutting-edge Suzuki Hayabusa 1300 has proven to be rider friendly, and developed around the concept of the "ultimate sports bike" continues to delight riders all over the world. About the model - 1/12 scale, Overall length: 178mm, Overall width: 71mm. - From its unique shape to the engine, this model accurately reproduces the real Hayabusa. - Parts such as upper cowling and tank are molded as one piece. - For engine, cowling, and swing arms screws are used for reliable attachment to the frame. - Metallic stickers are used to increase realism of the front fork. - Tires are made of real rubber. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Yamaha XV1600 Road Star 1999
300014080€43.49
Article number: 300014080 Product: 1:12 Yamaha XV1600 Road Star 1999 About the Yamaha XV1600 Road Star Yamaha shocked the motorcycle world once again when it brought out the XV1600 Road Star, a unique combination of traditional cruiser design with state of the art technology. The construction of the machine is focused on providing the maximum amount of comfort, performance and style to today's large capacity cruiser customer. The XV1600 is powered by a huge 1,600cc air-cooled V-twin pushrod engine housed in an ultra-long and low chassis. This OHV engine pumps out 46.3kW (62.6PS) at 4,000rpm and features an electric starter. The front suspension of this machine consists of telescopic forks, while the rear consists of a swinging arm monocross. This gorgeous motorcycle was voted "1999 Cruiser Bike of the Year" by Cruising Rider Magazine. About the model - Tamiya has recreated the Road Star in stunning detail as their latest addition to the 1/12 Motorcycle Series. - Overall length: 208mm, overall width 89mm, overall height: 100mm. - Enjoy the fascinating assembly incorporating real screws and two kinds of metal plated parts. The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece. - Kit comes with two kinds of tank emblems (one for the Japanese and American "Road Star" and one for the "Wild Star" as it is called in Europe. - Various decals for stripes and meters are also included in this authentic kit. - Transparent display stand also included. Warning! Not suitable for children under 14 years.
Model motorcycle kits 1:12
1:12 Yamaha XV1600 RoadStar Custom
300014135€48.99
Article number: 300014135 Product: 1:12 Yamaha XV1600 RoadStar Custom Big cruiser bikes are popular across the world, and a lot of owners like nothing more than to customize them to their own unique tastes. This updated assembly kit recreates just such a bike, a customized version of the mighty Yamaha XV1600 Road Star, the standard version of which was released as Item 14080. The XV1600 Road Star featured a 1,600cc V-twin that made it one of the most powerful motorcycles of its day, with telescopic front suspension and a rear shock tucked out of sight for a classic hardtail look to accentuate the low-slung lines, and liberal use of chrome. Customized bikes had side bags, a larger windshield, and many more variations. Item Contents/Information • This is a 1/12 scale plastic model assembly kit. Length: 208mm, width; 89mm, height: 120mm. • A customized version of the low-slung XV1600 Road Star is recreated in style, with metal-plated and clear parts, plus those recreating customized parts. • Comes with decals to recreate two marking options (green & black, or purple) which were available on bikes sold in Japan in 2000, plus masking stickers to help with the paint job. • The delicate fins of the air-cooled engine, spoke wheels and the slender brake and clutch lines all add to the realism of this motorcycle masterpiece.
RC trucks
1:14 RC 40ft Container 3A Semi-Trailer
300056377€569.99
We are delighted to announce the release of the 40-Foot Container 3-Axle Semi-Trailer for Tamiya 1/14 R/C Tractor Truck which features Tamiya original design. Cargo containers designed under ISO specifications are most common for international logistics, and include a 40ft type. This 3-axle semi-trailer with a 40ft. regular height container can be connected to any Tamiya’s 1/14 scale Tractor Truck. 1/14 Assembly Kit, Length: 917mm, Including 40 foot container, 3-axle semi-trailer, Twist Lock system. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:14 RC Buggyra Fat Fox (TT-01E)
300058661€179.99
Article number: 300058661 Product: 1:14 RC Buggyra Fat Fox (TT-01E) Here comes a new addition to the stable of racing trucks in the world of Tamiya R/C! This model recreates the Buggyra Racing Fat Fox piloted in the 2018 season of the European truck racing circuit by 2017 champion Adam Lacko. You’ll be able to have exciting truck races with your friends, just like the real ones thrilling fans on major circuits around Europe this summer! About the Model • This is a 1/14 scale R/C model assembly kit. Length: 420mm, width: 187mm, height: 188mm. • The Buggyra Fat Fox form is captured by a 3-piece polycarbonate body (2 cab components and body) put together using double-sided tape. • Separate polycarbonate rear fender and coupler parts, molded plastic side mirrors and 2-piece rear bumper. • Included stickers recreating the sponsors and livery of the #1 truck for the 2018 season, driven by Adam Lacko. • Black molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts compatible with 5mm taillight LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis.
RC trucks
1:14 RC EU Truck Volvo FH12 Globe.420 Ki
300056312€389.99
Article number: 300056312 Product: 1/14 RC EU Truck Volvo FH12 Globetrotter 420 Kit Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC EUTruck ScaniaR620 6x4 Highl Kit
300056323€474.99
Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kit Trucks are essential components of Article number: 300056323 Product: 1/14 RC EUTruck ScaniaR620 6x4 Highline Kitmany logistics networks around the world. One such truck which can be seen on the roads carrying large loads is the biggest and most powerful Scania truck, the R620. Tamiya is proud to add this wonderful piece of machinery the R620 6x4 to the 1/14 scale R/C Tractor Truck lineup. This massive tractor truck features 3-axle and is approximately 458mm long. Beautifully reproduced cabin tilts forward separately from the fenders, just like the actual truck. The accurately modeled fenders themselves are removable for realistically depicting a low carrying load. Realistic chassis and suspension further add to the imposing form of this unique model. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Grand Hauler (Matte Black)
300056356€499.99
Article number: 300056356 Product: 1:14 RC Grand Hauler (Matte Black) This is a special edition of Item 56344 Grand Hauler, the iconic North American big rig announced in 2015. It is a great option for those without the time or confidence to apply a paint job to their kit, as the body, H, P, and Q14/Q15 parts of the kit are pre-painted Metallic black (Tamiya Color TS-40), and – in a first for the 1/14 R/C Tractor Truck series - given a matte coating which provides a cool look and protection from damage. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, Width: 192mm, height: 330mm. • The boxy, customized Grand Hauler form is a real eye-catcher. Body, H, P, and Q14/Q15 parts are molded in black, pre-painted in Metallic black (TS-40), and given a matte urethane top coat for a stunning finish. • The matte paint job adds further emphasis to the numerous metal-plated parts, which include bumpers, radiator grille, roof-top horn and light bezel parts, side and kerb mirrors, air cleaners, mufflers and more! • The tried and tested Tamiya 3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with separately-sold Multi-Function Control Unit MFC-01 (Item 56511) (or MFC-03, Item 56523) for realistic LED lights and sounds.
RC trucks
1:14 RC Grand Hauler Customized
300056344€479.99
Article number: 300056344 Product: 1/14 R/C Grand Hauler Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm. • The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing. • Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Newly-designed 1/14 scale driver figure included. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC King Hauler Black Edition
300056336€494.99
Article number: 300056336 Product: 1/14 RC King Hauler Black Edition This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor. Tamiya's Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya's Tractor Trucks may be connected to separately-sold semi-trailers. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle
300056325€494.99
Article number: 300056325 Product: 1:14 RC LKW MAN TGX 26.540 XLX 6x4 3Axle The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly. Scope of delivery: Kit MAN TGX 26.540 with detailed and illustrated building instructions Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:14 RC M-B Race Truck Actros MP4 TT-01E
300058683€179.99
Article number: 300058683 Product: 1:14 RC M-B Race Truck Actros MP4 TT-01E The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm. • Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches. • The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler. • Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem. • Includes stickers recreating the sponsors and livery. • Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
RC trucks
1:14 RC MAN TGX 26.540 LightMet. Blue PP
300056370€519.99
Article number: 300056370 Product: 1/14 MAN TGX 26.540 6x4 Light Blue Edition This is a color variation of the R/C Man TGX 26.540 6x4 XLX (original: Item 56325) which depicts a vehicle produced by MAN Company and awarded "The 2008 Truck of the Year." This model is great for those without the time or confidence to apply a paint job to their kit, as cab parts molded in blue are pre-painted in TS-54 Light Metallic Blue and given a urethane coating for a beautiful, lasting finish.
RC trucks
1:14 RC MB Actros 3363 (Pearl Blue)
300056354€559.99
Article number: 300056354 Product: 1:14 RC MB Actros 3363 (Pearl Blue) This is a special edition of the Mercedes-Benz Actros 3363. It features pre-painted Body parts in Pearl Blue (Tamiya Color TS-89) for a cool look, with a durable coating applied to protect the paintwork from damage. About the Mercedes-Benz Actros 3363 6x4 GigaSpace This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons! The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter. The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!
RC trucks
1:14 RC MB Arocs 3348 Tipper Red/Silver
300056361€684.99
Article number: 300056361 Product: 1:14 RC MB Arocs 3348 Tipper Red/Silver This is a special edition of the R/C Mercedes Benz Arocs tipper truck (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as parts come pre-painted in TS-8 Italian red (cab, H, K, and M parts) and TS-17 Gloss aluminum (rear bed and CC parts), and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 576mm, Width: 190mm, height: 267mm. • The Arocs 3348 form is recreated by an injection molded body, with separate side mirrors and visor, etc. • Cab, H, K, and M parts are molded in red PS and pre-painted in Italian red (TS-8), while bed and CC parts are molded in gray ABS and pre-painted in Gloss aluminum (TS-17). All have a urethane top coat. • The 3-axle chassis has a tough ladder frame with aluminum side channels and resin cross members. • Truck bed section is comprised of metal subframe and resin panel sections for superb durability. • Compatible with Electric Actuator Set (Item 56545) for realistic truck bed motion. • TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the bed. • Rear tires, rear fenders and taillights have dedicated tipper truck model designs. • 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. • Metal leaf spring dampers with built-in coil springs provide durable suspension. • Compatible with MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.
RC trucks
1:14 RC MB Arocs 3363 6x4 ClassicSpace
300056352€464.99
Article number: 300056352 Product: 1:14 RC MB Arocs 3363 6x4 ClassicSpace This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons. The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter. Scope of delivery: Kit model with detailed illustrated assembly instructions, 540 electric motor, ABS body, 3-speed manual transmission Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Mercedes B. Actros1851 GigaSpace
300056335€464.99
Article number: 300056335 Product: 1/14 RC Mercedes Benz Actros 1851 GigaSpace The 2012 Truck of the Year award-winning Actros series is the flagship of the worlds leading truck manufacturer, Daimler. Its latest installment, the rear-wheel drive Actros 1851 GigaSpace runs on a 12.8-liter 6-cylinder turbo-charged engine generating 510hp and is used for long-distance haulage, heavy duty distribution haulage, construction haulage and so on. The Tamiya 1/14 scale R/C kit faithfully captures all the detail of the full size rig using ABS plastic for the body parts and a 3-speed, shift on the fly working transmission. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Pole-Trailer Kit w/Tubes
300056310€284.99
Article number: 300056310 Product: 1/14 RC Pole-Trailer Kit w/Tubes The Pole-Trailer is able to carry pipes of various lenghts due to its collapsible pole. The trailer also features an aluminum chassis and 4 highly detailed wheels. 5 plastic pipes of 55mm in diameter and 75cm in length are included. Warning! Not suitable for children under 14 years.
On-road RC cars (2WD/4WD)
1:14 RC Reinert Racing MAN TGS TT-01E
300058642€179.99
Article number: 300058642 Product: 1:14 RC Reinert Racing MAN TGS TT-01E Following on from the success of the groundbreaking Team Hahn Racing MAN TGS model (Item 58632) last year, Tamiya announces the release of a new racing truck product on the TT-01 Type-E chassis. It recreates the #77 truck run by Team Reinert Racing in the 2016 running of the FIA European Truck Racing Championship. About the Model • This is a 1/14 scale R/C model assembly kit. • The form of the MAN TGS racing variant is captured accurately by a 4-piece durable and lightweight polycarbonate body. It includes depictions of details such as engine, turbocharger and frame. • Separately molded parts recreate side mirror, coupler and rear bumper. • Included marking stickers recreate the sponsor livery of the #77 Team Reinert Racing truck for the 2016 season. • Wheels and 70mm diameter radial tires are specifically designed for racing truck models. • Features molded parts to make the model compatible with LEDs in separately-sold Tamiya LED Light Unit. • The TT-01 Type-E chassis features shaft-driven 4WD with easy handling and great customizability. • A wide range of option parts is available to tune the TT-01 Type-E chassis. Scope of delivery: Kit model with detailed illustrated assembly instructions, electronic speed controller, 540 electric motor, polycarbonate body Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC SCANIA 770 S 6x4
300056368€559.99
Article number: 300056368 Product: 1:14 RC SCANIA 770 S 6x4 Tamiya welcomes a new addition to 1/14 Tractor Truck Series – this time, the Scania 770 S 6x4 produced by the Swedish manufacturer Scania. The Scania 770 S 6x4 is one of the trailer heads in the Scania’s top-grade S Series – which had undergone a full model change in 2016. This trailer head features a double rear-axle drive 6x4 chassis equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp which was the most powerful in the industry as of 2020. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
RC trucks
1:14 RC Scania 8x4/4 Gun Metal paint.
300056376€949.99
Article number: 300056376 Product: 1:14 RC Scania 8x4/4 Gun Metal paint. Tamiya is proud to welcome the Scania 770 S 8x4/4 to the 1/14 R/C Tractor Truck Series. The Scania 770 S heavy trailer head is the newest heaviest-class trailer head added to the NEXT GENERATION SCANIA series in 2020. This S series features a V8 turbo engine capable of 770hp. The 8x4/4 means double-axle 4-wheel drive at the rear and double-axle 4-wheel steering at the front. Body-Parts are pre-painted in TS-38 Gun-Metal Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering, lift axle, pre-painted bodyparts WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Scania R470 Silver Edition
300056364€464.99
Article number: 300056364 Product: 1:14 RC Scania R470 Silver Edition This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm. • The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish. • Interior features such as seat and dashboard are depicted. • 2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles. • 3-speed transmission can be controlled via 4ch R/C transmitter. • Highly realistic suspension employs metal leaf springs. • Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. • Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.
RC trucks
1:14 RC Scania R620 6x4 High.blue paint.
300056327€494.99
Article number: 300056327 Product: 1/14 RC Scania R620 6x4 Highome blue painted This is a special edition kit of the 1/14 R/C Scania R620 6x4 Highline. The kit includes body components that are pre-painted in Tamiya Synthetic Lacquer TS-51 Racing Blue paint. The body is also clear coated with a urethane clear topcoat. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Truck Ford Aeromax Kit
300056309€454.99
Article number: 300056309 Product: 1/14 RC Truck Ford Aeromax Kit The massive American rig has joined Tamiya's 1/14 scale tractor truck stable. Tamiya's model of the Ford Aeromax tractor truck boasts both large scale realism and authentic functions. Servo-shifted 3-speed transmission is mounted at the front of the aluminum ladder frame. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Truck XxX/X
300056371€849.99
Article number: 300056371 Product: 1:14 RC SCANIA 770S 8x4/4 Tamiya is proud to welcome the Scania 770 S 8x4/4 to the 1/14 R/C Tractor Truck Series. The Scania 770 S heavy trailer head is the newest heaviest-class trailer head added to the NEXT GENERATION SCANIA series in 2020. This S series features a V8 turbo engine capable of 770hp. The 8x4/4 means double-axle 4-wheel drive at the rear and double-axle 4-wheel steering at the front. Included: Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering, lift axle WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.
RC trucks
1:14 RC US Fuel Tank Trailer 2Axle Galat
300056333€454.99
Article number: 300056333 Product: 1/14 US Fuel Tank Trailer 2Axle "Gallant Eagle" The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC US Truck King Hauler Kit
300056301€484.99
Article number: 300056301 Product: 1/14 RC US Truck King Hauler Kit The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement. Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads. RC Truck King Hauler Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC USTruck Globe Liner Cab Over Kit
300056304€484.99
Article number: 300056304 Product: 1/14 RC US Truck Globe Liner Cab Over BS Tamiya has captured the attractive appearance of tractor trucks in a 1/14 scale electric powered "Globe Liner". The rear double axle drive uses rigid propeller shafts for smooth performance. Globe Liner Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Volvo FH16 Tow Truck 8x4
300056362€1,094.99
Article number: 300056362 Product: 1:14 RC Volvo FH16 Tow Truck 8x4 Our series of ultra-realistic 1/14 scale R/C trucks is a byword for fun, and offers a wide variety of different models and truck types. Now, it is to expand with another brand new type – the tow truck, which makes its living towing heavy duty vehicles such as tractor trucks. It promises a completely different element of enjoyment to predecessors in the series. The FH16 is marketed by Volvo, a renowned actor in the global commercial vehicle market. The FH Series includes a 750hp 16.1-liter turbocharged inline-6 engine FH16 Globetrotter 750 8x4 tow truck. About the Model • This is a 1/14 scale R/C model assembly kit. Length: 750mm, width: 195mm, height: 300mm. • Features a detailed molded plastic depiction of the cab, with photo-etched front grille and interior features. • This model’s front axles feature the first twin steering system seen in the Tamiya 1/14 Truck series. • The rear boom and underlift mechanism features plenty of metal components for excellent durability. Employ the new separately sold Actuator Set (Item 56553) to control them via R/C transmitter. • Ladder frame has aluminum side channels and resin cross members. Power from the front motor is delivered to the two rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering. • Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles. • Three-speed transmission allows shifting via transmitter (only one gear is usable when towing). • Headlights and taillights can be lit up with separately sold LEDs, and the model is compatible with Item 56523 Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03). • Compatible TROP truck option parts: 56523, 56531, 56538, 56548, 56549, 56550, 56551, 56553. Warning notices: Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
RC trucks
1:14 RC Volvo FH16 XL 750 4x2
300056375€484.99
Article number: 300056375 Product: 1:14 RC Volvo FH16 XL 750 4x2 Tamiya welcomes the Volvo FH16 Globetrotter XL 750 4x2 Tractor in our popular 1/14 Tractor Truck series! The FH16 series is the flagship of Swedish manufacturer Volvo Trucks and it was the result of a model change in 2012. The top-class Globetrotter XL offers comfortable interior space and superior aerodynamics, and allows long-distance travel coupled with a high-output 750hp engine. Volvo FH16 XL 750 4x2 Model kit ABS Injection body with aero-pack Aluminum Ladderframe, 1 drive axle, 3-Speed shifting gearbox, metal-plated wheels, Manual, Electricmotr Type 540. WARNING! Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model. When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury. Read and follow the instructions supplied with paints and/or cement, if used (not included in kit). Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. Warning! Not suitable for children under 14 years.
Military figures 1:16
1:16 Figure Wehrmacht Tank Crewman
300036301€15.49
Article number: 300036301 Product: 1:16 Figure Wehrmacht Tank Crewman This is a 1/16 scale plastic figure assembly kit depicting a WWII Wehrmacht tanker. ★Uniform components and decorations are captured with accuracy. ★Comes with two different right arm parts, plus a choice of headgear. ★Separate parts are included to depict details such as the Iron Cross, holster, binoculars and more. Warning! Not suitable for children under 14 years.
RC tanks
1:16 RC Brit. Centurion Mk.III w/Option
300056045€1,094.99
Article number: 300056045 Product: 1:16 RC Brit. Centurion Mk.III w/Option Tamiya is delighted to announce that our 1/16 R/C tank series welcomes a new addition – this time, the Centurion Mk. III. The Centurion was developed as a heavy cruiser tank to counter the powerful German Army’s tanks in the 1942 during the WWII. The Mk. III was perhaps the most polished Centurion variant, equipped with the L/66.7 20 pounder long barrel gun. It was deployed in the Korean War in 1950, and showed off overwhelming strength which saved the Allied forces from crisis many times. The production reached about 2,800 between 1948 and 1956. After the Korean War, the Mk. III were deployed in European countries but also other areas such as India, Israel, and Egypt with their formidable force.
RC tanks
1:16 RC Leopard 2 A7V w/Option Kit
300056047€1,149.99
The Leopard 2A7V is one of the most modern battle tanks in the world and is used in numerous countries. The V stands for "improved" or, more accurately in German "verbessert". The improvements compared to the previous version are considerable: Better visibility through the use of modern optics and camera systems. More firepower through the revision of the 120mm cannon. The communication system has been improved and the Battle Management System (BMS) is used. The chassis has also been reinforced with an additional protection module and additional armor on the front protects the tank better against armor-piercing ammunition. The original weighs an impressive 63.9 tons and is powered by a 1500 hp engine. TAMIYA has now made this tank into a remote-controlled version in 1/16 scale. Here, too, the electronics have been completely redeveloped and the model redesigned compared to its predecessor, the 56020 2A6. The result is a real highlight: Both in terms of detail and the functions, it sets standards in this area. All functions can be controlled via the DMD T-12, such as driving functions, turret rotation, light functions, sounds and also the combination of sound, movement and light when firing a cannon, for example. Assembly Kit of Scania 770S, 1/14th scale, Auxiliary machinery tower, aerodynamic Package, Aluminium Frame, double front Axle steering. Warning! Not suitable for children under 14 years.
RC tanks
1:16 RC Panzer Königstiger Full Option
300056018€779.99
Article number: 300056018 Product: 1/16 RC Panzer Königstiger Full Option Tamiya continues to develop its 1/16 R/C Tank Series. The fourth full-option kit to make its appearance is the German Heavy Tank King Tiger. Not only can the model move forward and backward and turn with a great sense of power, but the turret can be rotated and the 88mm gun raised and lowered. To imitate the firing of the main gun and of front machine gun, light flashes while sound is heard. The sound of the engine has been recorded, with the assistance of the French museum of Saumur, from a real Maybach HL230-P30 engine of the only King Tiger kept in working condition in the world. Not only all stages of engine sound (idling through full throttle) but also all the metallic clanking of the tank tracks have been thoroughly recorded. During the second half of WWII, Zimmerit coating was applied on German tanks to protect them from the threat of magnetic mines. For this kit, the Zimmerit coating has been replicated with a unique relief printed seal. Thanks to this seal, you can now represent accurately a late war King Tiger with great ease. About the German King Tiger (Henschel Turret) The German Heavy Tank King Tiger made its appearance during WWII in 1944. The chassis front armor was 150mm thick with 80mm thick side armor and powered by a 700hp Maybach HL230-P30 engine. The Henschel and Porsche companies came up with rival turret prototypes. The first 50 tanks produced had Porsche turret whereas subsequent tanks were equipped with the Henschel designed production turret that featured many improvements over the first model. The King Tiger was armed with a 71-caliber 88mm gun that had enough power to pierce 150mm thick armor from 2000m away. Between The beginning of production in Summer 1944 and March 1945, 440 units were completed. Due to the havoc wreaked by the King Tiger during the final German offensive on the Ardennes front in December of 1944, the Allied forces that moved in on Berlin would fear the King Tiger up until the very last day of the war. 2 Types of Engine Starting Sounds Besides using electric motor starter in general conditions, the King Tiger's engine was started using a crank starter on cold days to save batteries power. This model realistically replicates both of these procedures. When switching on transmitter first, the crank starting sound is heard, but when you switch on the receiver first, electric motor starting sound is heard. You can now feel like you are part of the tank crew as you decide which procedure to follow based on temperature conditions. The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right.
RC tanks
1:16 RC Panzer Tiger 1 Full Option
300056010€719.99
Article number: 30006010 Product: 1/16 RC Panzer Tiger 1 Full Option Tamiya has put incredible power and versatility of the German Tiger I in your fingertips with this 1/16 scale, fully functional R/C tank. Just some of the many functions this tank is capable of have been recorded in the video clips below. First check out the firing of the main cannon, complete with true to life flash and cannon recoil. The shot is so powerful that it actually causes the tank itself to recoil, just like the full size Tiger I. Then, click on the next image to see the cannon rotate, tracking down the enemy and preparing to fire. Next is the firing of the authentically recreated 7.92mm MG34 machine gun! Finally, take a gander at how the Tiger I moves on its durable resin and metal tracks. *1/16 scale Radio Controlled Assembly Model Kit (overall length: 530mm, overall width: 232mm) *A four-channel RC unit is necessary to operate this kit. Two 7.2V Tamiya Racing Packs (or equivalent) and charger are also required. Powerful Engine Sound Just about every sound the real Tiger I made can be made on Tamiya's 1/16 scale Tiger I. When the tank is switched on, either a manual crank start sound, or an automatic engine start sound is heard. After your engine is turned over, its time to move the tank around. As you accelerate, the engine thundering increases just like the real Tiger I. Stop the tank, and the sound of authentic idling begins. Once you have located your target, rotate the massive turret and listen to the grinding of gears of the real German war machine. The more you control this R/C tank, the more you will feel like the commander of the full size Tiger I ! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right.
RC tanks
1:16 RC US MBT M1A2 Abrams Full Option
300056041€1,099.99
Article number: 300056041 Product: 1:16 RC US MBT M1A2 Abrams Full Option The latest super-realistic model in the 1/16 scale R/C Big Tank Series recreates that modern day U.S. stalwart, the M1A2 Abrams. The Abrams has been around since the early 1980s, with constant upgrades to ensure that it stays at the cutting edge of military technology. M1A2s were introduced from 1992, developed to be chock full of front-line technology and bring the M1 into the digital age. They featured depleted uranium armor, a modified commander’s cupola and more, and saw action in the conflict in Iraq in 2003. About the Model • This is a 1/16 scale R/C model assembly kit. Length: 615mm, width: 231mm, height: 190mm. • Expertly recreated angular Abrams form includes depictions of anti-slip surface textures. • The chassis is powered by a gearbox with Type 540 motors and features metal parts such as lower hull, suspension arms, drive sprockets and more, for excellent durability. • Aluminum gun barrel has traverse and elevation/depression movement, thanks to a servo and Type 130 motor. • Multi-Function Unit is made up of turret and vehicle control units. It allows control of various movements via separately sold transmitter. These include turret rotation and gun elevation. It also ensures that a range of realistic sound and light effects (headlights, taillights, barrel flash) are paired with model actions. • Gun barrel control system can train the main gun in a single direction, which it remains pointed in even as the tank moves or climbs, and the turret rotates. • The included dual speaker offers highly realistic sounds. • Durable resin pre-assembled tracks feature metal pins and connectors. • Compatible with the Battle System (Item 53447) for fun and interactive battles with friends! • Requires a 4-channel transmitter with self-neutral function, battery pack and transmitter batteries. Warning! Not suitable for children under 14 years.
RC tanks
1:16 RC US Panzer Sherman M4 Full Option
300056014€649.99
Article number: 300056014 Product: 1/16 RC US Panzer Sherman M4 Full Option Since Tamiya is behind this R/C M4 Sherman, authenticity in scale, body detailing, and working suspension goes without saying. Acoustic authenticity is also high on the score sheet, through the digitally recorded sounds of a real Continental R975-C4 9-cylinder engine, which roars from the bowls of the tank as it runs. And speaking of the running, you will be able to recreate all the speed and nimbleness of the full-sized M4 Sherman with state-of-the-art R/C technology. Finally, with the addition of "Battle System" infrared tank scoring system, you can reenact one of the most classic military clashes of all time-Tiger vs. Sherman. 2-Channel R/C System for Complete Range of Movement 1. Forward/reverse over wide range of speed. 2. Gradual turning, pivot turning, super pivot turning. 3. Rotation of turret, raising/lowering of cannon. 4. Illuminating head and taillights. 5. Cannon firing (w/light and sound effects). 6. Machine gun firing (w/light and sound effects). *For 3-6, tank must be in stopped position. Roar of the Continental R975-C4 9-cylinder Engine All the power of the real Continental radial engine can be experienced on Tamiya's new R/C M4 Sherman tank. Listen to the deep start-up sound followed by throaty idling, and then hear the auto-choke activate as the engine kicks over. As you put the tank through its paces, the sound of the engine changes, just like the real M4 Sherman. Firing of the cannon, machine gun, raising/lowering of the cannon, etc.-all the action is linked with sound for an unbelievably realistic tank experience. Suddenly, you are the division commander all the power of the legendary U.S. tank is at your fingertips! The front-mounted gearbox contains two Type 380 motors that can operate together or individually to produce forward/reverse running and pivot turning. Metal torsion bars and suspension arms combine with the wide tracks to smoothly absorb bumps and dips in the terrain and provide high maneuverability. In addition, realistic engine sounds accompany the tank as it starts up, drives, and stops to idle. Hull-mounted main gun can be elevated, depressed, and swung to the left and right.
Off-road RC cars
1:18 RC Dynahead 6x6 (G6-01TR)
300058660€314.99
Article number: 300058660 Product: 1:18 RC Dynahead 6x6 (G6-01TR) Tamiya is delighted to announce the latest 6-wheeled beast in our line-up, the Dynahead 6x6, which takes inspiration from the big trucks used in the gruelling offroad world of truck trials. It appears on a new chassis variant named the G6-01TR, based upon the G6-01, with hub reduction axles providing extra height for taking on rougher terrain. With a stylish body penned by self-proclaimed "hyper designer" Takayuki Yamazaki from Japan, (Dual Ridge, etc.) it is sure to be a fun addition to your R/C garage! About the Model • This is a 1/18 scale 6WD R/C model assembly kit. Length: 453mm, width: 244mm, height: 232mm. • Wheelbase: 173+126mm. • The cab-over truck body is a brand new design by Takayuki Yamazaki. • Hub reduction axles raise ground clearance by 15mm; in conjunction with the traction provided by a 37.35:1 gear ratio (with kit-included 18T pinion), the Dynahead 6x6 has awesome off-road and crawling capability! • 5-spoke wheels are paired with V-tread block tires (Item 53854) for superlative bite. • With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable.
Model car kits 1:20
1:20 Lotus Type 79 1978
300020060€67.99
Art.Nr.: 300020060 Artikelbezeichnung: 1:20 Lotus Typ 79 1978 •1/20 scale plastic assembly model kit of the Lotus type 79. •The front and rear upper cowls can be removed after assembly to view the engine and cockpit area. •The monocoque chassis, suspension, and engine have been precisely reproduced. •Synthetic rubber tires included. •Top quality decals to depict the Lotus seen at both British and German GP's, which did not feature JPS markings, are included. •Newly designed tires and metal funnel covers included. •Add further detail to your model with Item 12635 1/20 Lotus Type 79 1978 Photo-Etched Parts Set.
Model car kits 1:20
1:20 Tyrrell P34 Six Wheeler Monaco GP77
300020053€35.49
Art.Nr.: 300020053 Artikelbezeichnung: 1:20 Tyrrell P34 Six Wheeler Monaco GP77 About the Tyrrell P34 In the 1976 F1 World Championships, Tyrrell P34 six-wheeler made its debut and demonstrated outstanding performance throughout the season. In the following season, P34 obtained First National City Bank as its main sponsor and changed its cowl painting to blue and white two-tone. The P34 in this season featured full engine cowling to improve aero-dynamics and was driven by P. Depailler and R. Peterson. Tyrrell encountered trouble when the development of P34's unique front tires stagnated as a result of the tire war between Michelin and Goodyear, but they continued their efforts to win by making minor-alterations to their P34 machines throughout the season. About the Model 1/20 scale assembly model kit depicts Tyrrell P34 as it appeared in the Monaco GP, 1977 with the same half engine cowling of the previous season. Overall length: 201mm, overall width: 101mm Model captures the unique form of the Tyrrell P34 with rear seat cowl, front brake cooling air duct, stabilizer, rear wing side plate, and taillight. Ford Cosworth DFV engine portrayed with the utmost detail. Gear box, ignition, and wheels are all precisely recreated. Driver figure included. Markings included for recreation of two machines: #3, R. Peterson and #4, P. Depailler. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Castrol Celica
300024125€27.99
Article number: 300024125 Product: 1:24 Castrol Celica When the curtain went up on the 1993 World Rally Championships, the "92 title winning Toyota Team of Europe were ready to take on their capable rivals Lancia, Ford, Subaru, Mitsubishi, and the others, making this Monte Carlo Rally a very exciting event for motorsports fans. Toyota"s highly sophisticated Celica GT-Four RC, with driver Didier Auriol at the wheel, showed impressive performance by out-running all competition to dominate this first round of the season. Regarded as one of the most technologically advanced and potent rally racing machines available today, the Celica GT-Four RC is powered by a 2 liter, liquid cooled in-line four cylinder DOHC, turbocharged engine, capable of yielding 299 HP and 45.9kg/m of torque. This tremendous power is channeled via 6-speed gearbox to all four wheels. The electronically controlled torque-splitter distributes 50:50 front/rear power under normal operations, but is capable of automatically shifting to other ratios when the power distribution sensor detects a change in road surface conditions or even driving style. Night running equipment used during Monte Carlo Rally included quadruple spot-lamps plus cornering lamps that made the racer look even more massive.
Model car kits 1:24
1:24 Fig.-Set Campus Friends II
300024356€29.49
Article number: 300024356 Product: 1:24 Fig.-Set Campus Friends II 1983 saw the release of the original Campus Friends Set, a collection of five figures and a scooter that was most useful to modelers given the adaptability of the figures to a range of accompanying models. Now, we have brought that concept into the modern day: newly-scanned figures are paired with a range of accessories more appropriate to the 2020s, with plenty of options to choose from. About the Model • This is a 1/24 scale plastic figure assembly kit. • Parts are included to create five figures (four female, one male); they were designed using cutting edge 3D scanning techniques to recreate subtle details such as creases and wrinkles in clothing. • Natural poses include a figure taking a selfie, and more. • The male figure and one female feature a choice of head parts; two more female figures have a choice of right arm components. • Modern accessories include guitar case, coffee cup, smart phone, and various bags. • Makes a great partner for models in the extensive Tamiya 1/24 Sports Car Series.
Model car kits 1:24
1:24 Ford Mustang GT4
300024354€48.99
Article number: 300024354 Product: 1:24 Ford Mustang GT4 Tamiya is delighted to announce the appearance of the muscular Ford Mustang GT4 in the long-running 1/24 Sports Car Series! The actual car is a race-ready powerhouse featuring honed aerodynamic form with front spoiler, rear wing and diffuser, high performance brakes, lightweight carbon fiber vented engine hood, roof, door panels and more, plus a big 5.2-liter V8 engine in the front. This model recreates the 2019 spec car. About the Model • This is a 1/24 scale plastic model assembly kit. Length: 203mm, width: 81mm, height: 60mm. • The powerful form of the 2019 spec Mustang GT4 is captured in style, thanks to the extensive time spent with a real car by our designers. • Engine hood air intake designs are captured in style, contributing to the overall muscular look of the car. • The underside features depictions of the complex suspension and visible engine sections. • A realistic interior has renderings of the dedicated steering wheel, console panel, roll cage and racing seat. • Separate parts for lights help streamline the painting process. • Comes with decals to recreate either a gun metal color no.17 car, or a white no.18 car. Masking stickers are also included. • Includes metal-plated depictions of side and rear view mirror surfaces.
Model car kits 1:24
1:24 Honda NSX : Acura NSX
300024344€51.99
Article number: 300024344 Product: 1:24 Honda NSX : Acura NSX The 2015 Detroit Auto Show was the stage for a momentous announcement for super sports car fans (and particularly those of the legendary NSX), with the first glimpse of the production version of the long-awaited second generation NSX (NC1). This hi-tech modern car was designed under the lead of Acura, and employs the Super Handling-All Wheel Drive (SH-AWD) hybrid system deploying 3 electric motors in tandem with the 3.5-liter V6. One of the motors is between the engine and the 9-speed dual clutch transmission, while the other two act upon one of the front wheels each, to provide exacting cornering. The car also has four distinct drive modes that provide performance tailored to the conditions. The body and space frame are extremely lightweight, using aluminum and high strength steel extensively. The whole assembly process is taken care of in a brand new Honda manufacturing facility in Ohio, U.S.A. About the Model • This is a 1/24 scale plastic model assembly kit. • Length: 187mm, width: 92mm, height: 51mm. • The model recreates the dynamic NSX form, which was penned with aerodynamics and cooling in mind. • It employs the same frame as the real car, with authentic rendering suspension. • The V6 engine is recreated with impressive detail. • Features a realistic depiction of the cockpit interior with excellent detail such as door interior panels. • Includes decals and stickers to recreate markings, plus window masking stickers. • Metal transfers are used to capture mirror surfaces and emblems. • Contains parts to assemble left- and right-hand drive versions, plus Acura and Honda cars. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Honda S600 Convertible/Hardtop
300024340€45.99
Article number: 300024340 Product: 1/24 Honda S600 Cabrio/Hardtop The Honda S600 is an automobile manufactured by Honda. It was launched in March 1964. It was available as a roadster and as a fastback coupé – introduced in March 1965. The S600 was the first Honda available in two trim levels. During its production run up to 1966, the model styling would remain pretty much the same, with the most notable changes coming to the front grille, bumper, and headlights. The S600 got 57hp out of a 606cc 4-cylinder DOHC engine that could hold its own compared with racing engines, and it featured a motorcycle style chain-driven rear wheel drive. Exports to Europe followed as the S600 quickly gained respect, gaining popularity as a highly lightweight and speedy sports car. It was also to prove a success in races both inside and outside of Japan. The Tamiya model faithfully captures the essence of the S600, thanks to new tooling and updated parts from the S800 model kit. About the model: • This is a 1/24 scale plastic model assembly kit. • The compact, lowdown form of the S600 is covered with accuracy. • This kit is based upon Tamiya’s accurate kit of the S800 (Items 24190, 89657). New parts are included to depict S600-specific features such as the front grille and bumper unit, hood, radiator-top parts, brake and reverse lights, plus wheels. • The unique rear chain-drive unit-based trailing arm suspension is concisely and realistically captured, as is the front double wishbone setup. • Parts are included to recreate the S600 as an open top with folded down roof, or as a hard top. • Decals and metal transfers have been newly designed for this model. Detailed Plastic Kit of model Honda S600 Convertible/Hardtop in scale 1:24 Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Lexux LFA V10 Roadver. w/PE-Parts
300024319€82.99
Article number: 300024319 Product: 1/24 Lexux LFA V10 Roadver. w/PE-Parts Limited to only 500 units worldwide and coming at a bargain price of US$375,000 is Toyota's exotic sports car the Lexus LFA. Developed with the aim of creating a world-class supercar, the ultra-exclusive Lexus LFA is infused with the latest automotive technologies. It features a 4.8-liter V10 engine, a chassis equipped with a rear trans-axle, an interior which incorporates carbon fiber, and a sleek aerodynamic body. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 McLaren Senna
300024355€64.99
Article number: 300024355 Product: 1:24 McLaren Senna Item Contents/Information • This is a 1/24 scale plastic model assembly kit. Length: 198mm, width: 91mm, height: 60mm. • The sleek aerodynamic body’s form is captured in style. Uniquely, it is composed of a single monocoque part onto which body panels are attached individually, allowing a highly realistic depiction of the car. • Parts are designed to be assembled into blocks of the same color, streamlining the painting process. • Features a realistic depiction of the V8 twin turbo engine and visible sections of the complex surrounding engineering. • The model can be assembled as European, U.S. or Japanese spec. • Separate parts for brake calipers and discs ensure that while the wheels (and brake discs) rotate, the caliper remains stationary for super realism. • The dashboard can be assembled in the standard roadgoing or streamlined racing positions. • Metal transfers recreate McLaren logos and more.
Model car kits 1:24
1:24 Mercedes Benz SLR722 McLaren 2006
300024317€73.99
Article number: 300024317 Product: 1/24 Mercedes Benz SLR722 McLaren 2006 In a joint venture with McLaren Automotive, Mercedes designed the SLR or "Sport, Leicht, Rennsport" (sport, light, racing). The original SLR series was released in the 1950s and were based on the W196 F1 car. To revive the series, Mercedes release a new, sleek SLR in 2003. The SLR722 was introduced, in 2006, and named after the 7:22am start time of drivers Moss/Jenkinson car at the 1955 Italian Mille Miglia endurance race. Powered by a 5.4L SOHC V8 supercharged engine, the 722 is capable of 640hp output and can go from 0 to 100 in 3.6 seconds. Because of its power and beauty, the SLR722 has been compared to supercars such as the Enzo Ferrari and Porsche Carrera GT. 1/24 scale plastic assembly model kit of the Mercedes-Benz SLR722. Distinctive features of the SLR722 such as the wheels, body kit etc are accurately reproduced. Synthetic rubber tires. The hood can be opened like the actual car allowing you to see the detailed supercharged V8 engine inside. The doors can be opened to showcase the meticulously recreated interior. Metal transfers to depict the manufacturer emblems are included for extra detail. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Mitsubishi Lancer Evolution VI
300024213€31.49
Article number: 300024213 Product: 1/24 Mitsubishi Lancer Evolution VI ★This is a plastic model assembly kit depicting the car which formed the base for Mitsubishi's 1999 rally challenge. ★From the front bumper designed to boost cooling, to the 2-step rear wing, the form of the car is captured in style. ★Features recreation of the radiator visible through the nylon mesh front grille. ★Choose whether to attach front fog lamps. ★Realistic depictions of suspension and interior. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Nissan 370Z Heritage Edition
300024348€49.99
Article number: 300024348 Product: 1:24 Nissan 370Z Heritage Edition Truly iconic car names are few and far between, but one must surely apply that moniker to the "Z-Car", sold in Japan as the Fairlady Z – from its debut as the 240Z (S30) in 1969 through to the present day, it has delighted sports car fans across the world. The current 370Z design has been tweaked and updated since its first release in 2008, and in May 2018 a special Heritage edition was released with racing stripes and an interior design inspired by the special "Zap" edition of the classic 280Z. Tamiya has faithfully reproduced this heritage edition Z in 1/24 scale with all the detailed edition parts faithfully depicted.
Model car kits 1:24
1:24 Nissan GT-R Streetversion
300024300€70.99
Article number: 300024300 Product: 1:24 Nissan GT-R Streetversion At the 2007 Tokyo Motor Show, much attention was paid to the new Nissan "multi-performance sports car." This model had dropped name Skyline and became simply the Nissan GT-R. Along with the name change, the car also had some other mechanical changes, especially under the hood. Gone is the straight six, and in its place there is a new twin-turbo V6, which has an amazing 480 horse power with 60kg of torque. With amazing speed and cornering ability, the GT-R has reached the super car plateau. Nissan GT-R Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Nissan R390 GT1
300024192€36.49
Article number: 300024192 Product: 1/24 Nissan R390 GT1 About the Nissan R390 GT1 One of the most prestigious and grueling racing events held in the world is the "Le Mans 24 Hour Endurance Race". It has brought excitement and pleasure to motorsports enthusiasts worldwide, ever since it was first held in 1923. In 1997 Nissan Motor Co., Ltd. Entered their latest Nissan R390 GT1 which was developed to vie for this renowned racing event. The R390 GT1 took its name from a car, R380, that excited Japanese motor sports enthusiasts over thirty years ago. Jointly developed by Nissan and TWR (Tom Walkinshaw Racing), the R390 GT1 is the state of the art racing expertise of them. Aerodynamically refined low and sleek body styling is suggestive of Nissan's highly competitive Gr. C machines raced during the 1980's. The 3.5 liter V8 engine, producing an awesome 600 horsepower output, is bolted directly to the carbon composite monocoque and works as a load-carrying element. The tremendous power is delivered to the rear wheels via a transversely mounted, six speed transmission. The four wheel double wishbone suspension system is connected to the horizontally mounted shock absorbers via pushrods and bell cranks to provide optimum road handling performance.
Model car kits 1:24
1:24 Nissan Skyline 2000GT-R Str. Custom
300024335€51.99
Article number: 300024335 Product: 1/24 Nissan Skyline 2000GT-R Str. Custom The hard-top version of the Skyline 2000GT-R was released in 1970 and packed a serious punch with a detuned version of the inline-6 engine seen on the Nissan R380 prototype racing car. The "hakosuka", as it is affectionately known in Japan, is still a Japanese racing legend today, thanks to an incredible 50 total wins achieved in partnership with the 1969 4-door sedan GT-R. Now, it makes an appearance as a production model of the car with parts depicting popular customizations from its day, as well as a realistic driver figure. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Nissan Skyline GT-R (R32) Nismo-Cu.
300024341€38.99
Article number: 300024341 Product: 1:24 Nissan Skyline GT-R (R32) Nismo-Cu. This is a model of the classic Skyline GT-R (R32). This particular kit varies from previous releases as it has brand new parts that depict customizing accessories that were designed and made by Nissan's tuning outfit Nismo. The R32 is the 1989 version of the legendary GT-R. It had a 4WD drivetrain; it was mated to a 280hp engine and it was loaded with cutting-edge design and technological innovations for its day. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Porsche 911GT3 ´99 Streetversion
300024229€35.99
Article number: 300024229 Product: 1/24 Porsche 911GT3 ´99 Streetversion About the Porsche 911 GT3 Since its debut in 1963, the epoch-making Porsche 911 has captivated generations of sports car enthusiasts. Over the years, various models of the 911 have been released, including the 1998 Le Mans-winning 911 GT1. In 1999, the "heart" of that automotive masterpiece, the water-cooled flat-six engine, was inherited by the Porsche 911 GT3. The brainchildren behind that machine are Porsche's development engineers in Weissach, who imbued it with superior agility and handling, without compromising active safety. Capable of accelerating to 100km/h in a mere 4.8 seconds, and with a top speed of 302km/h, the GT3 achieved a new record for production cars when it completed a lap on the northern circuit of Nuerburgring in only 7.56 minutes. The exterior appearance of the GT3 remains true to that of its predecessors, but features a new rear end, discreet side-sills, fixed rear wing, red brake calipers and sporty 18-inch light-alloy wheels. Compared with the 911 Carrera, the four-piston aluminum fixed monobloc brake calipers are larger and sturdier than before, and tightly grip the perforated brake discs. The GT3 cockpit is true reflection of its performance. It features leather-covered bucket seats, which ensure not only ample side support, but also comfort on long journeys and provide about 20kg of weight savings. And since the entire rear-seat section of the car has been dropped, the overall weight of the GT3 was reduced by another 8kg-a true benefit for a sports car of this performance level. Tamiya has recreated this epoch-making sports car in 1/24 scale. The intricate engine is visible when model is viewed from below. The upper surface features a four part rear-wing construction, enhancing the sophistication of the body design. Kit also comes with the Porsche emblem, authentically recreated as a metal transfer. The inside of the detailed cockpit includes a carpet seat for the floor. Glossy metallic parts are used on the wheels, headlight reflectors, door mirrors and muffler. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Porsche 934 Jägermeister
300024328€52.99
Article number: 300024328 Product: 1/24 Porsche Turbo 934 Jägermeister The Porsche Turbo RSR 934 was a descendent of the world-famous Porsche 911 Turbo, and appeared for the first time in the Group 4 GT class in 1976. The rear-mounted 2,994cc turbocharged flat-6 engine was capable of 260hp, making it a top-of-the-line production car at the time. This model, covered in the famous Jagermeister livery, sped to victory in both the European GT Championship and the German Sports Car Championship in its debut season. The Tamiya assembly kit model faithfully captures all the details of this famous racing car in 1/24 scale. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Renault Alpine A110 ´71 Monte Carlo
300024278€47.99
Article number: 300024278 Product: 1/24 Renault Alpine A110 ´71 Monte Carlo In 1997, Tamiya released the street version of the Alpine A110 as a 1/24 scale model, and its perfect duplication of the car's nostalgic design was a big hit. Now, Tamiya presents the rally version of the Alpine A110, representing the car that won the 1971 Monte Carlo Rally. The Alpine was developed by Jean Redele, who initially raced with the Renault 4CV. He soon noticed the limitations of its heavy body, and decided to replace it with his own design made of FRP. Redele drove a modified 4CV, dubbed the Alpine, to victory in the Mille Miglia road race in 1955, and continued to develop new versions based on Renault cars. The Alpine A110 was released in 1963, and was based on the Renault 8. It had a 956cc 4-cylinder engine at the rear and lightweight body shell made of FRP. Front suspension featured the independent double wishbone type, while the rear used swing arms. The A110 proved its ability by dominating road races held throughout the late 60's and early 70's, with its win at the 1971 Monte Carlo Rally undoubtedly crowning the pinnacle of its career. With its successful record and beautiful design, the Alpine A110 is adored by motor sports fans worldwide. Skillful reproduction of the Alpine A110's low and sleek body styling. Overall Length: 161mm. Exquisitely designed decals reproduce the A110's 1971 Monte Carlo Rally markings. Amazingly precise details of car's mechanisms, including rear-mounted inline 4-cylinder engine, front and rear suspension and special rally wheels. Includes dash-mounted odometer and other features specific to the rally version. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Subaru BRZ
300024324€56.99
Article number: 300024324 Product: 1/24 Subaru BRZ This is a 1/24 scale assembly model of the new Subaru BRZ, which was released to the driving public in March 2012. Details of full size subject: The BRZ is a compact, front engine rear-wheel drive sports car powered by one of Subaru's trademark boxer engines, a 2.0-liter 4-cylinder unit. Its lightweight, rigid chassis was designed to give the driver an exciting driving experience and features a low center of gravity as well as a specially-tuned front strut, rear double wishbone suspension setup. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Subaru Impreza WRC 2001
300024240€34.49
Article number: 300024240 Product: 1/24 Subaru Impreza WRC 2001 Soon after the adoption of the new regulations for the World Rally Championships in 1997, Subaru boldly entered their Impreza WRC. That well-balanced machine was equipped with a powerful horizontally opposed 4 cylinder turbo engine, and secured that year's Manufacturers Title. In the following years, various improvements were made to the car in accordance with changes in the production model. The 2001 Impreza adopted a four-door sedan body and first showed itself at the season opener, the Monte Carlo Rally. The unique appearance of the car was highlighted by small compound headlights, spoiler attached to the extreme rear and blister-style fenders. The engine underwent extensive tuning in an effort to boost responsiveness, and major progress was made in regards to electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Subaru's ace driver, Richard Burns, was accompanied by Markko Martin, Petter Solberg, and Toshihiro Arai. Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Taisan Starcard Porsche 911GT2 `95
300024175€32.49
Article number: 300024175 Product: 1/24 Taisan Starcard Porsche 911GT2 `95 About the Taisan Starcard Porsche 911 GT Since its debut back in 1964, the Porsche 911 stable has established an unparalleled esteem, both on streets and in competitions. The "GT2" is a race ready version developed for the world's GT racing events. The traditional 911 styling has been aerodynamically refined, yet retains the unmistakable identity of the series. The rear mounted engine is the hallmark of the 911 series, powered by a water cooled, horizontally opposed six-cylinder unit. This 3.6 liter powerplant is coupled with twin-turbochargers, yielding an awesome 400 plus horsepower output. The six speed gearbox efficiently transmits this abundance of power to the rear wheels. Front MacPherson strut and rear multi-link suspension system has a sophisticated geometry for the utmost control during high speed running. The large, 380mm diameter brake disks are ventilated to take the racing abuse. They are equipped with ABS (anti-lock braking system), for the positive stopping power and safety. The unique front spoiler, with its up-turned ends, is the result of thorough wind tunnel testing. A huge, two tier rear spoiler is equipped with air ducts on both sides. The riveted over fenders add to its aggressive looks. During the 1995 Japanese GT Car Championships, Porsche entered a fleet of their GT2's, including three entries from Team Taisan. Each of Taisan's machines scored a victory during the season, bringing the coveted title to the team. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Model car kits 1:24
1:24 Toyota GT-One TS-020 LeMans ´99
300024222€38.99
Article number: 300024222 Product: 1/24 Toyota GT-One TS-020 LeMans ´99 About the Toyota GT-One TS020 "The Longest Day in France", also known as the 24 Hours of Le Mans endurance race, takes place two hundred kilometers southwest of Paris, in the city of Le Mans. This high-speed circuit is made up of public roads closed off for the race, which stretch to 13.6 kilometers in length-the world's longest circuit track. Throughout the long history of the Le Mans, two or three major manufacturers have always fought for the top honors, but the 1999 race boasted six major contenders. The Toyota GT-One TS020 led the grueling 24 hour event right up until one hour before the finish, when it was struck with an untimely tire blowout, but still managed to finish second. Subtle refinements to the sleek carbon fiber composite body of the GT-One TS020 were conducted in the pursuit of optimal aerodynamics. The 3600cc V8 twin turbo R36V engine also underwent various modifications, improving power, torque, and fuel efficiency. About the Model • 1/24 scale plastic assembly model kit based on the GT-One TS020 of the 1999 Le Mans. • Overall length: 202mm, overall width: 84mm. • This model boasts faithful recreation of innovative aerodynamics. • Highly detailed nose and diffuser-just like the full size car. • Rear cowl is removable, allowing modeler to view the detailed V8 twin turbo engine even after completion. • Kit includes decals for Car no. 1 and 3. • Masking seals are also included for accurate body painting. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 A6M2b Zero Model 21 (Zecke)
300060317€129.99
Article number: 300060317 Product: 1:32 Mits.A6M2b ZERO Fighter 21 About the Mitsubishi A6M2b Zero Fighter Model 21 (Zeke) The Japanese Zero Fighter plane was widely feared and respected by friend, foe and all who came into contact with it. A triumph of aerodynamic engineering and military science, the Zero Model 21 served in the skies across East Asia during early stages of World War II, contributing immensely to the Japanese war effort. It remains today an enduring symbol of that fierce and globe-spanning conflict. About the model •1/32 scale assembly kit of the Model 21 Zero Fighter. Length: 283mm, Width: 375mm. •Accurately reproduced curved cowling and fuselage are modeled from slide molding to accurately depict rivets and surface texture. •Realistically replicated Nakajima "Sakae" type 12 engine features propeller reduction unit, exhaust pipe and other detailed parts. •Both folded and extended wing tips included and can be used interchangeably even after assembly. •Durable and precision detailed metal parts depict landing gear system and pitot tube. •Seat belt incorporates photo-etched parts for extra realism. •Retractable landing gears increase display possibilities, while allowing model to be easily stored in package after assembly. •Features movable landing gears, rudder and flaps. •Includes standing and seated pilot figures and seven types of markings for planes which participated in Pearl Harbor attack. •Includes parts to depict any variation of Mitsubishi and Nakajima-built Zero Model 21. •Comes with wheel chocks and access steps. Includes posable display stand. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 A6M5 Zero Model 52 (Zecke)
300060318€129.99
Article number: 300060318 Product: 1:32 Mitsub.A6M5 Z.Fighter 1:32 scale aircraft offer all the details one would expect from such large models. Accurate detailing of the engine, instrument panel, seat or other cockpit area. Many metal parts have been used to make the product not only beautiful but also stable. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Bo.F-15E Strike Eagle Bunker Buster
300060312€149.99
Article number: 300060312 Product: 1:32 Bo.F-15E Strike Eagle Bunker Buster About the Boeing F-15E Strike Eagle w/"Bunker Buster" The McDonnell Douglas F-15 Eagle is regarded as one of the most capable twin-engine air-superiority fighters in the world today. Ever since its maiden flight in July 1972, this record breaking Mach 2.5 fighter has been a yardstick for jet fighter design. In the early 1980's, the Air Force requested McDonnell Douglas to modify their F-15 fighter into a dual-role aircraft to be known as the F-15E "Strike Eagle" for use as an air-to-air fighter, and for air to ground attack missions. This new version was designed to penetrate deep into enemy territory unescorted, and strike military targets with pinpoint accuracy. The strike eagle employs two highly reliable Pratt & Whitney F100-PW-229 engines and was designed specifically as a two-person crew of pilot and weapons system officer. The LANTRIN (Low Altitude Navigation and Targeting Infra-Red for Night) system enables the Strike Eagle to operate at night and in bad weather. The Strike Eagle can also be employed with up to an 11-ton payload and can carry the GBU-28 Bunker Buster, a guided bomb developed to destroy strengthened underground bunkers. The Strike Eagle was first deployed in December 1989. During the Gulf War in 1991, 2 squadrons of 48 F-15E Strike Eagles demonstrated their power as multi-purpose fighter/attack planes. About the model The popular F-15E Strike Eagle (item 60302) was released in 1993. However, since this items release, the F-15E has come to be equipped with a variety of newly developed weapons systems. Following the changes in times and aviation fighting technology Tamiya has modernized its kit to feature accurate replicas of all the latest weapons systems employed by the F-15E Strike Eagle. Includes parts for replication of the GBU-28 "Bunker Buster", as well as AGM-130 and JDAM guided bombs, and ARAAM air-to-air missiles. 1/32 scale, total length 600, total width 404mm. Faithfully recreates intrepid form of Strike Eagle. Main parts such as fuselage and wings are to be fastened with screws.Radar unit/nose side-access panel, and Vulcan Cannon hatch can all be opened and closed after assembly. Canopy and air brakes can be assembled in either the up or down positions. Cockpit, radar, and Vulcan Cannon are all recreated down to the finest details. Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber.Each landing gear is brilliantly crafted in die-cast, and tires are fashioned with synthetic rubber. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 F-4J PHANTOM II MARINES
300060308€139.99
Article number: 300060308 Product: 1:32 F-4J PHANTOM II MARINES About the McDonnell Douglas F-4J Phantom II Marines When test pilot Robert C. Little prepared to take off in the YF4H-1 prototype on May 27, 1958, few onlookers could have guessed at the success story yet to unfold. Over thirty years from that faithful day, the successors of that prototype, the Phantom series of aircraft, would be protecting the skies over the free world and see adoption by eleven nations including the U.S. Navy, Air Force and Marines. The Phantom II was developed by McDonnell Douglas and first pitted against Vought's F8U-3 Crusader III to see which aircraft would be the Navy's next main carrier-borne fighter. In 1959, the selection was made in favor of the robust Phantom II. The early production model, the F4H-1F, underwent various tests and training exercises, eventually leading to the F4H-1 model, which was deployed to several Navy and Marine divisions. In 1962, in efforts to unify the names of Navy and Air Force aircraft, the F4H-1F and F4H-1 became designated the F-4A and F-4B respectively. Just after its adoption by the Navy, the Phantom II showed the world what it was made of, breaking record after record, including top-speed, altitude, and time-to-climb. To top off these results, the U.S. Navy ran Project LANA, a transcontinental speed race. The roman L stood for the number 50, for "50th Anniversary of Naval Aviation". The contest was to demonstrate the Phantom's shocking speed and reach. Based on this impressive track record, and on comparative tests against Air Force fighters at the time, it was decided that the next main fighter of the Air Force would also be the Navy's Phantom II. The F-4B version was specially tailored to the needs of the Air Force, and became designated the F-4C. Further improvements to that aircraft resulted in the F-4D model. The Navy continued to make improvements to the Phantom II. Mounting the F-4B with an automatic carrier landing system, yet another variant, the F-4G was born. On May 27th, 1966, perhaps the best known of the Navy's Phantoms, the F-4J, made a successful maiden flight. It housed powerful General Electric J-29GE-10 turbo jet engines, the powered-up version of the J-29GE-8 engines used on the F-4B and F-4G. It was also fitted with an AN/AWG-10 radar on its fire-control system and an ASW-11 one-way data-link. Stronger landing gear of vacuum-melted steel fitted with wide tires were added to meet the strict sink rate requirements, and the top and bottom surfaces of the inner wings were slightly bulged out. The Navy's foremost requirement being improved takeoff and landing, the F-4J was added a slot to the stabilator leading edge, which provided tremendous down force at low speeds. This Phantom II was capable of carrying a maximum weapon load of about five tons, which gave it a truly powerful punch. Its main air-to-air armaments consisted of AIM-7 Sparrow and AIM-9 Sidewinder missiles and a 20mm gun pod. AGM-12 Bullpup and AGM-84 Harpoon air-to-surface missiles, as well as various bombs and rockets were also loaded in great numbers. In 1966, the 101st Fighter Squadron of the Navy became the first to be outfitted with the F-4J. Deployment to the Marines soon followed in 1967, with F-4J aircraft outfitting the 334th, 232nd, 235th, and 333rd Fighting Plane Squadrons. As the deployment of the F-4J to the Navy and Marines continued through 1967, U.S. involvement in the Vietnam War was getting deeper and deeper. Back in 1961, the U.S. government decided to send their troops to Vietnam to support the South Vietnamese government, but the chaos only worsened. It was the carrier-borne Phantom II that launched the air battle, engaging the MiGs of the North Vietnamese. In late May of 1968, F-4J aircraft from the Navy's 33rd and 102nd Fighter Squadrons arrived at the Gulf of Tonkin aboard the USS America. The Navy's Phantom II headed for North Vietnam for roles in bomber support and anti-MiG patrol. This jack-of-all-trades aircraft was equipped with Mk.82 bombs and Sidewinder missiles for self-defense, and often served as effective close support for the ground forces of the Marines. The service of the F-4J in Vietnam is highlighted by one particular episode. On September 11 1972, Major Thomas (Bear) Lasseter and Captain John D. Cummings of VMFA-333 "Shamrocks" shot down a MiG-21 near Hanoi, the only time in the war that a MiG was downed by a U.S. Marine aircraft. That F-4J was later downed by a SAM (surface-to-air missile), but the pilots were later rescued. The production of the F-4J ended in late 1972. However, because the development and deployment of its successors, the F-14 Tomcat and F/A-18 Hornet were late, about 250 F-4J planes were equipped with the latest fire control devices and engines, and later designated F-4S. These aircraft remained in Marine use until 1991. Battling in five major conflicts spanning over three decades, and breaking almost every conceivable aviation record, the highly versatile Phantom II earned a special place in warplane history. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 F4U-1 Corsair "Birdcage"
300060324€134.99
Article number: 300060324 Product: 1:32 F4U-1 Corsair "Birdcage" The F4U-1 Corsair® was a truly unique aircraft, with a powerful 2,000hp engine and a massive 4m propeller, not to mention the highly characteristic inverted gullwings. In October of 1940, it was the first American fighter to achieve a speed of 400mph (around 640kph). Initial production models of the aircraft featured a striking canopy called the "Birdcage". The aircraft took part in operations from February 1943, and with its powerful 12.7mm machine guns proved to be a formidable opponent for the Japanese Zero Fighters. In order to capture the aircraft as accurately as possible, Tamiya designers not only inspected, measured and examined the real aircraft at five different museums across North America, they were also given access to Northrop-Grumman's blueprints. The result is a highly detailed and precise 1/32 scale model of the F4U-1 Corsair. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Grumman F-14A Tomcat Black Knights
300060313€164.99
Article number: 300060313 Product: 1:32 Grumman F-14A Tomcat Black Knights About the Grumman F-14A Tomcat "Black Knights" Ever since its first flight in 1970, the U.S. Navy's F-14 Tomcat has been one of the best top Air Defense Fighter. From 1990, in addition to its role as an interceptor, the F-14A, noted for its long range and superior weapons systems was designated as an air-to-ground strike plane. With this new role, the Tomcat was fitted with a new weapons arsenal. Since 1996, the F-14A employs the AN/AAQ-14 targeting pod, referred to as the LANTIRN. This targeting pod gives the F-14A precision bombing capability by procuring targets for nose-mounted infrared laser or other laser guided weapons. The AN/AAQ-14 targeting pod contains a high-resolution, forward-looking infrared sensor (which displays an infrared image of the target to the pilot), a laser designator-rangefinder for precise delivery of laser-guided munitions, target tracking software, and more. The LANTIRN, combined with GBU-16 and GBU-24 guided bombs, enables precision striking with a minute margin of error from several meters down to tens of centimeters. This precision can be realized at long-range. The VF-154 Black Knights is attached to the USS Kittyhawk, homeported at Yokosuka Harbor, Japan. The Black Knights were formed after WWII, and were deployed to both the Korean and Vietnam War. F-14A were employed with the VF-154 from 1984, and used extensively in Operation Desert Shield during the Gulf War in 1990. About the model • Fighter-Bomber Grumman F-14A Tomcat plastic assembly kit. • 1/32 Scale •Overall length: 598mm, Overall width: 612mm. • The form of the aircraft has been accurately rendered. • Kit employs metallic parts and screws to make the wing movable. • A full range of armament including Phoenix missiles, GBU-16 and GBU-24 laser guided bombs are provided as well as a AN/AAQ-14 LANTIRN targeting pod. • Includes 3 figures, 2 pilots and a catapult officer, and decals for 5 aircraft. Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Lockheed Mar.F-16CJ Fighting Falcon
300060315€164.99
Article number: 300060315 Product: 1:32 Lockheed Mar.F-16CJ Fighting Falcon This is the first ever 1/32 scale F-16 model to replicate the characteristic large air intake duct, nicknamed "Big Mouth". The F110-GE-129 jet engine is also replicated in precise detail, and can slide into place on a hook and rail system exactly like the actual aircraft. The entire engine can also be displayed outside the aircraft using the included cart. This model achieves a level of accuracy only possible in such a large-scale work. The upper surfaces of the wings are molded to the main body of the plane in one single piece, creating a "Blended Body" which artfully depicts the F-16's beautiful, streamlined form and proportions. The model features screw-mounted main body and die-cast landing gears with actual rubber tires for extra durability. This model makes use of the newly developed mini poly caps to ensure that missiles, ECM pod and external fuel tanks are removable and interchangeable even after assembly. This way, modelers can enjoy depicting different weapon configurations specific to various F-16 missions. Use of poly caps also enables trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps to move freely after assembly. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Mc Donnell DOUGLAS F-15 EAGL
300060304€124.99
Art.Nr.: 300060304 Product: 1:32 Mc Donnell DOUGLAS F-15 EAGL About the McDonnell Douglas F-15C Eagle At one time during the missile boom years, the U.S. Air Force believed future air battles could be decided by air-to-air missiles rather than guns in the traditional dog-fighting manner. The need for air superiority weapons was relearned during the Vietnam Conflict and led to an Air Force requirement for an all-weather, single-seat, twin-engined fighter. This aircraft was to optimize counter-air operations. The U.S. Air Force requested several manufacturers to study and develop prototypes during the late 1960's under the FX program (Fighter Experimental). McDonnell Douglas was awarded a contract to develop the F-15 Eagle jet fighter in December 1969. The Eagle's advanced aerodynamic design greatly reduced drag at both the low and high lift configurations, and achieved superior maneuverability during varying flight conditions. Making its maiden flight in July 1972, it was deployed in November 1974 as the F-15A Eagle, and had been in active service since then. It is powered by two Pratt & Whitney F100 afterburning turbofan engines developed exclusively for the for the F-15, and is capable of speeds in the Mach 2.5 range. The F-15 can carry a heavy load of devastating weapons, including the internally mounted 20mm M61A-1 Vulcan cannon, with 940 rounds of ammo, the AIM-7 Sparrow radar guided missile and AIM9 Sidewinder short range air-to-air missile. In 1979 an upgraded version of the Eagle was introduced as the F-15C. One notable change was the increase in fuel capacity, but even more fuel was made possible by the conformal fuel tanks, which snuggle between the wings and up against the jet inlet ramps. This increase in fuel capacity enables the Eagle to expand long range operations, such as escorting AWACS and strike aircraft to their targets. The Landing gear has been reinforced to accept the extra fuel weight, allowing a maximum take-off weight of 68,000 lbs (30844 kg). The F100 Pratt & Whitney engines were also upgraded for easier maintenance and increased performance. The F-15C's maximum rate of climb at sea level is more than 50,000ft (15,240m) per minute. As the Premier jet fighter the Eagle continuously receives improvements to keep pace with the changing state of the art. The multi-stage improvement program (MSIP) is organized to enhance the avionics, like the internal ECM system and computer capacity. The APG-63, provides excellent long range navigation and tracking for the Eagles' fighter interdiction role. Owning to its versatility, adaptability and ruggedness, the F-15 Eagle will certainly continue to play its role of an air superiority fighter well into the 21st century. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Mc Donnell Douglas F-4J Phantom II
300060306€129.99
Article number: 300060306 Product: 1:32 Mc Donnell Douglas F-4J Phantom II Originally accepted for Navy service in 1958, the F-4 Phantom II went on to protect the skies of numerous Western nations. This kit depicts the F-4J variant which served with distinction with the Navy during the Vietnam War and was responsible for many victories over North Korean MiGs. The major assemblies are attached with screws and the one-piece fuselage and die-cast metal landing gear legs ensure superb strength. The canopy and air brake may be assembled in either open or closed positions as well. To top it off, an array of ordnance including Sparrow and Sidewinder missiles, two crew figures, and three marking options are also included. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Mc Donnell F4 C/D PHANTOM II
300060305€124.99
Article number: 300060305 Product: 1:32 Mc Donnell F4 C/D PHANTOM II The F-4 Phantom II was originally conceived as a carrier-borne fighter for the Navy in the late 1950s but was eventually also adapted by the Air Force and Marines in addition to the air forces of many other countries. This model kit can depict the first variant used by the Air Force, the F-4C, as well the subsequently upgraded F-4D. The kit features a one-piece fuselage for easy assembly and die-cast metal landing gear legs to ensure a stable stance after the kit is finished. The canopy and airbrake may be assembled in either open or closed positions. A wide range of ordnance, two crew figures, and three marking options are also included. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 North American P-51D Mustang
300060322€134.99
Article number: 300060322 Product: 1:32 North American P-51D Mustang The P-51 Mustang is considered by many to be the best fighter aircraft of WWII. The P-51 Mustang came about when the British Purchasing Commission asked North American Aviation to produce the Curtiss P-40 for the RAF, but North American stated they could build something better. The P-51D is considered by many experts to be the definitive variant of the Mustang as it was the most widely produced. It featured a bubble canopy which gave the pilot superb all-round visibility as well as a heavier armament of six 12.7mm machine guns. Wing racks allowed the carriage of drop tanks to extend range or bombs for ground attack. P-51Ds were instrumental in helping the Allies gain air superiority over Europe, and after Germany's defeat, they continued their role as long-range escorts for B-29s attacking Japan. Many also saw service during the Korean War as fighter-bombers and a few even continued to serve with air forces of less developed nations until the 1980s. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 P-51D / K Mustang Pacific
300060323€164.99
Article number: 300060323 Product: 1:32 P-51D / K Mustang Pacific The P-51D Mustang incorporated advanced features such as a laminar flow wing and an efficient radiator design, and powered by the Packard-built Rolls-Royce Merlin V-1650 engine, it demonstrated superior highaltitude performance. The P-51D was equipped with a Hamilton Standard propeller as standard but shortages of the propeller led to the installation of Aeroproducts propellers on some P-51Ds built at North American's Dallas factory, and these were distinguished by the designation P-51K. Most of the P-51Ks saw combat in the Pacific Theater, although some were also sent to Europe. In addition to the fighter role, some P-51s were equipped with cameras and used as reconnaissance aircraft. Such aircraft which were converted from P-51Ds and P-51Ks were designated F-6Ds and F-6Ks respectively. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 Supermarine Spitfire Mk.VIII
300060320€154.99
Article number: 300060320 Product: 1:32 Supermarine Spitfire Mk.VIII The True Successor to the Mk.V The legendary Spitfire was the representative British fighter of WWII. Many variants were built and among these was the Mk.VIII, a variant developed to be the replacement for the RAF's previous mainstay Spitfire, the Mk.V. The Mk.VIII was fitted with a Rolls-Royce Merlin 60-series engine, larger radiators, and an air filter as standard. Other improvements included fuel tanks added in the wings, retractable tail wheel, shortened ailerons, and enlarged rudder and elevators. From the latter half of 1943, the Mk.VIII were deployed to the Mediterranean and Pacific Theaters and saw service with RAF, USAAF, RCAF, and RAAF units. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.VIII. ★Overall Length: 302mm, Overall Width: 383mm. ★Features of the Mk.VIII, including the retractable tail wheel, shortened ailerons, and wing fuel tanks, have all been accurately reproduced. ★You can select either retracted or deployed landing gear and tail wheel even after assembly. ★Parts to depict standard and extended wingtips included ★Features moveable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★Parts for 30 and 90 gallon fuel tanks included. ★Comes with 3 kinds of markings to depict the aircraft from USAAF, RAAF, and RCAF units. ★Comes with 2 pilot figures, 1 seated and 1 standing.
Model aircraft kits 1:32
1:32 Supermarine Spitfire Mk.XVIe
300060321€149.99
Article number: 300060321 Product: 1:32 Supermarine Spitfire Mk.XVIe A Case of a Good Bubble The legendary Supermarine Spitfire is often credited with saving England during WWII. Among its many variants was the Mk.XVI, which was a Mk.IX airframe that was powered by a Merlin 266 engine license-built by Packard Motor Car Company in the United States. Most Mk.XVIs featured the larger rudder and E Type wing with two 20mm cannons and two 12.7mm machine guns. With the introduction of the teardrop canopy, the rear upper fuel tank capacity was reduced to 33 gal. and that of the forward lower fuel tank was increased to 48 gal. to compensate. 1,054 Mk.XVIs were produced from September 1944 until July 1945. During the war, they were deployed on the European front and served as fighter-bombers. In the post-war period, the Mk.XVI was used by the RAF as well as the Belgian and Greek air forces until the early-1950s. About the Model 1/32 scale plastic assembly kit of the Spitfire Mk.XVIe. ★Overall Length: 302mm, Overall Width: 311mm. ★Distinctive features of the Mk.XVIe, including Packard Merlin 266 engine, E Type wing, teardrop canopy, and modified landing gear legs, are accurately reproduced. ★Canopy may be opened even after assembly. ★Features movable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. ★30 gallon drop tank, two 250lb bombs, and 3 types of markings included. ★Comes with 3 kinds of markings to depict the aircraft from Royal Air Force squadrons as well as the (Pilots) Refresher Flying Unit. ★2 pilot figures, 1 seated and 1 standing, are included. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 US VOUGHT F4U-1A Corsair
300060325€154.99
Article number: 300060325 Product: 1:32 US VOUGHT F4U-1A Corsair This is a highly detailed model recreating the F4U-1A variant of the highly popular Corsair model. Newly-designed parts are included in the kit to accurately capture the modifications which distinguish it from the original F4U-1. The F4U-1A drew on the experience of Navy and US Marine Corps pilots' experience with the original aircraft, making modifications to further improve the performance of this legendary bird. One of the most noticeable alterations was the discarding of the "birdcage" cockpit and its extensive frame sections that hampered visibility; a semi-bubble canopy with minimal frame was installed instead, which improved the pilot's view and made it easier to land the F4U-1A. Additional upgrades included raising the pilot's seat 18cm to help with visibility, and later extending tail wheel struts by 16.5cm. A wedge shaped spoiler was added to the starboard wing to correct the tendency of the port wing to stall first and roll out of control. Such modifications contributed greatly to the F4U-1A's suitability for use from aircraft carriers; although by this time it had been passed over for that duty by the F6F Hellcat. Unlike its predecessor, the F4U-1A would later be used as fighter-bomber, and was given the capability of carrying a drop tank under the fuselage, plus a bomb rack for use on raids supporting ground troops. This combination of fearsome performance in the air and bombing capability made the F4U-1A a vital component as the Allied forces conducted their 'island hopping' strategy progressing through the Solomon Islands. Scope of delivery: Kit, instructions, decor Warning! Not suitable for children under 14 years.
Model aircraft kits 1:32
1:32 US Vought F4U-1D Corsair
300060327€165.00
Article number: 300060327 Product: 1:32 US Vought F4U-1D Corsair This is the D variant of the popular Corsair World War II fighter plane. It uses new parts to recreate features specific to the F4U-1D, which was the first Corsair to be cleared for use on aircraft carriers. This fighter-bomber could carry drop tanks on new hard points under the wing root, and up to 8 rockets under the outer wing. It provided invaluable close support for ground troops during landings in places such as the Philippines and Okinawa, and continued to serve after WWII, in Korea. F4U-1D Specific Detail differences from previous variants: 1. The semi-bubble canopy was altered during production to remove upper side frames and improve visibility. 2. Propeller blades were thicker from the root. 3. Hardpoints under the wing root allowed carrying of bombs and drop tanks. 4. The tail wheel cover had a new fairing to improve aerodynamics. 5. Outer wing sections had extended metal areas with mounts for eight rockets total. 6. Cockpit floor window was scrapped. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Alum. Metal Barrel JGSDF Type 16
300012686€20.49
Article number: 300012686 Product: 1:35 Alum. Metal Barrel JGSDF Type 16 This is a precision metal gun barrel for the Japan Ground Self Defense Force Type 16 MCV model kit. It adds greater realism compared to the standard plastic part found in the model. Kit model, scale 1:35, Aluminum gun barrel, instructions, suitable to 300035361.
Military model vehicles 1:35
1:35 Brit. BT. Matilda Mk.III/IV(3)
300035300€52.99
Article number: 300035300 Product: 1:35 Brit. BT. Matilda Mk.III/IV(3) At the beginning of 1930, the British army made the decision to produce tanks for different roles, with production of the A12 "Matilda" beginning in 1936. At that time, the Matilda had the thickest armor at 60mm, came armed with a 2-pounder cannon, and had thick side skirts which protected the "Japanese type" bogies. Powered by two diesel engines, the Matilda had a top speed of 24km/hr which was deemed appropriate as it matched the walking speed of infantry. At the North African front, thanks to its impenetrable armor, the Matilda completely defeated the opposing Italian forces. Because of the strength of their armor, the Germans began to use 88mm guns which were the only weapons that could penetrate the Matilda. The Matilda was used throughout WWII and was also used by Soviet, Australian, and Allied forces under the Lend-Lease Act. •This is a 1/35 assembly kit model of the British Infantry Tank Matilda which saw action atthe North African Front during WWII. •Length: 174mm, Width: 72mm. •The Matilda's mechanical form has been accurately reproduced. •The number of parts required for the assembly of the gun turret, hull, and the complicated suspension has been minimized for ease of assembly. •Tall and short cupolas and two types of antennas are included in the kit. •Assembly and belt type tracks are included. •Full-size commander figure, as well as a loader and driver torso figures are included.(Total 3) •3 kinds of decals for the North African front are included. •The Matilda would look fantastic alongside other 1/35 vehicles from the North African front such as German Armored Car Sd.Kfz.223 (Item 35268), German Kubelwagen Type82 (Item 35238), German Armored Car Sd.Kfz.222 (Item 35286), Italian Medium TankCarro Armato M13/40 (Item 35296). Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. M10 IIC Achilles
300035366€49.99
Article number: 300035366 Product: 1/35 M10 IIC Achilles Here is the British Achilles tank destroyer, which appears in Tamiya 1/35 scale for the first time! The Achilles was a modification of the M10s which Britain received from the U.S., with the original 3-inch main gun replaced by the fearsome British 17 pounder. The vast majority of M10s were the M10 IIC variant, which was based upon the late-production M10 with distinctive enlarged turret-rear counterweight. Around 1,000 were produced between Spring 1944 and the end of WWII, the Allied forces making good use of it after the Normandy landings, benefiting from the power of the gun which allowed it to tear through Tiger I front armor. About the Model - This is a 1/35 scale plastic model assembly kit. - In-depth study of the real thing has enabled this highly accurate scale depiction of the Achilles. - Features newly-molded parts depicting the upper hull with its sloped armor, late production M10 turret counterweight, and long 17pdr gun. - Interior features excellent detail, including depictions of shell racks and multi-part 17pdr gun breech. - Comes with 3 full body figures – gunner and loader seated in the fighting compartment, and commander seated on the turret edge – plus a driver torso figure. All are brand new! - Lower hull, suspension, wheel and track parts are carried over from the acclaimed Tamiya 1/35 model of the M10 that served as the Achilles’ base. - New sprocket wheel parts depict late M10 components. - 2 planned marking options depict 93rd Anti-Tank Regiment (Italy, 1944) and 75th Anti-Tank Regiment (NW Europe) vehicles.
Military model vehicles 1:35
1:35 Brit. MBT Challenger 1 Mk.III (2)
300035154€44.99
Article number: 300035154 Product: 1:35 Brit. MBT Challenger 1 Mk.III (2) British forces in the 1991 Persian Gulf War were able to rely on a significant asset in the Challenger 1, its awe-inspiring 120mm main gun accounting for numerous Iraqi T-72 tanks, and the crew protected ably by front and side composite and reactive armor. This kit can be assembled to recreate a Challenger 1 used by British forces, or also NATO troops. Nylon mesh is included to recreate the baskets encircling the turret. Two highly realistic figures are included; one depicts a bescarfed commander in desert conditions, while the other captures a commander in the distinctive NATO cold-climate uniform. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. MBT Challenger 2 Desertis.(2)
300035274€63.99
Article number: 300035274 Product: 1/35 Brit. MBT Challenger 2 Desertis.(2) Tamiya presents the British Challenger 2 MBT to the Military Miniature Series, further adding to the 1/35 scale MM Iraq series of models. Great to build and compare with previously released British MBT including the Centurion (89555), Chieftain (35068) and Challenger 1 (35154) or other vehicles active in Iraq such as the U.S. M1A2 Abrams (35269). About the Challenger 2 Compared to the Challenger 1 MBT that saw service during the Gulf War, the Challenger 2 features improved second generation Chobham armor capable of withstanding armor piercing and shape charge rounds. The fire control system was updated with the latest digital technology, including a panoramic Commander's sight with built-in laser rangefinder and a thermal gunner's sight. The 120mm L30 rifled main gun provides improved muzzle velocity and accuracy, and enables the Challenger 2 to discharge armor piercing, HESH, smoke and depleted uranium rounds. Special modifications to tanks deployed to Iraq included reactive armor added to the front, composite armor on the sides, a special cover to reduce exhaust heat, canvas skirts to reduce dust ingestion, Commander's Independent Thermal Viewer (CITV) and Combat Identification Panels (CIP). Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Tank Comet A34
300035380€52.99
Article number: 300035380 Product: 1:35 Brit. Tank Comet A34 Tamiya is proud to welcome the Comet to the 1/35 Military Miniature Series for the first time! At the end of WWII, the British Army developed the Comet – which became a base of later British Army tanks such as the Centurion - as a counter for the powerful German Tiger and Panther tanks. With the hull design based upon the structure of the existing armored cruiser tank Cromwell, the Comet employed a larger turret with a powerful 17-pounder gun. The Comet first saw action in the Operation Varsity in March 1945, and around 900 including ones produced after WWII were built. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Univer. Carrier Mk.II (5)
300035175€21.49
Article number: 300035175 Product: 1:35 Brit. Univer. Carrier Mk.II (5) During WWII, the British army used small sized fully tracked weapon carriers famously known as "Bren Gun Carriers." This 1/35 scale plastic assembly kit model reproduces one of those carriers, the Universal Carrier Mk.II which was the largest produced in the carrier series. The open-top compartment has been realistically reproduced with realistic seats and radio equipment. Kit comes with firearms such as a Bren machine gun, two Enfield rifles, and PIAT anti-tank weapon, as well as a variety of accessories including ammunition cases. Furthermore, 3 figures from European front and 2 figures from North African front are also included in kit. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit. Univers. Carr. Mk.II (3)
300035249€23.99
Article number: 300035249 Product: 1:35 Brit. Univers. Carr. Mk.II (3) During WWII, the British army used various small tracked personnel carriers such as the Universal Carrier Mk.II, which first appeared in 1942. Tamiya's plastic assembly model kit accurately reproduces this vehicle's compact design, suspension, and equipment. Included in the set are three figures to depict a driver, gunner, and radio operator as well as an additional two figures in North African front uniforms. Four kinds of decals are also included to allow you to depict the Universal Carrier Mk.II in a wide variety of battlefield settings including North Africa, Italy, and France. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Brit.Tank Cromwell Mk.IV Cruis.(1)
300035221€43.99
Article number: 300035221 Product: 1:35 Brit.Tank Cromwell Mk.IV Cruis.(1) This is a plastic assembly model kit of the Cromwell Mk.IV Cruiser tank, which served alongside the Churchill infantry tank after the Normandy landings in June, 1944. The distinctive riveted armor and turret have been precisely reproduced. The large road wheels, which allowed the Cromwell to move quickly on the battlefield, have also been accurately rendered. Parts are included to depict features which were unique to Normandy: "Normandy cowl" ducts which prevented the exhaust gases from entering the tank and hedgerow cutters, which were attached to the front of the tank to allow it to move through the thick brush. Five kinds of decals and a tank crewman figure are included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Field Kitchen (4)
300035247€19.49
Article number: 300035247 Product: 1:35 Diorama-Set Field Kitchen (4) This is a plastic model assembly kit of a field kitchen widely used by the German army during WWII. The typical German field kitchen consisted of a large-sized cooking pot and a coffee heater and was connected to a limber which carried cooking materials, various kinds of containers, and emergency rations; the whole package has been realistically reproduced. The limber and trailer can be attached after assembly. Two each of soldier and cook figures are included with the set. A rich assortment of accessories such as milk cartons, bread, cheese, apples etc provide the model with a realistic finish. Four figures included. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set Ger.Engine Maint.Cr.(2)
300035180€16.29
Article number: 300035180 Product: 1:35 Diorama-Set Ger.Engine Maint.Cr.(2) This set will easily allow you to depict a scene of WWII German tank engineers preparing to work on an engine. ★In addition to two engineer figures in overalls, engine parts for a Maybach HL230 engine which powered Tiger I, Panther, and King Tiger tanks are included. ★It also includes accessory parts to depict tools, toolboxes, an oiler, a burner, a drum can etc. to provide your diorama with a greater realistic presence. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Diorama-Set US Infantry-Weapons
300035121€6.49
Article number: 300035121 Product: 1:35 Diorama-Set US Infantry-Weapons This is a 1/35 scale plastic model assembly kit depicting typical WWII U.S. weaponry. ★A comprehensive set includes various pistols, the M1 rifle, M2 carbine, Thompson submachine gun, M2 heavy machine gun, M2 mortar, bazookas, M18 recoilless rifle and various other subjects. ★Also comes with accessories such as ammo cases, rounds, gas marsks and more. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Dt. PzKpfw. I Ausf. B (1)
300035388€31.49
Article number: 300035388 Product: 1:35 Dt. PzKpfw. I Ausf. B (1) Tamiya is proud to welcome the German Tank Panzerkampfwagen I Ausf. B into our 1/35 Military Miniature Series, which means that the main German tanks of WWII are all in our line-up now. Although Germany had been forbidden to develop tanks after the defeat of WWI, it developed the Panzerkampfwagen I under the name of "agricultural tractor" to deflect suspicions of rearmament, and the Pz.Kpfw.I became a massproduced tank. The engine on the Ausf.B was upgraded to 100hp, nearly double the 57hp of the Ausf.A. Also, it had a 40cm longer hull, and a pair of 7.92mm MG13 machine guns were equipped. While the Pz.Kpfw.I was developed for training, it first saw live action in Spain during the Spanish Civil War, and was widely used in various situations such as the invasion of Poland and the Eastern Front. 1/35th scale, assembly kit, Model of the German Tank Panzerkampfwagen I Ausf.B, tools, paints and glue required Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set Brit. Infant. Patrol. (5)
300035223€11.99
Article number: 300035223 Product: 1:35 Fig-Set Brit. Infant. Patrol. (5) This is a 1/35 scale set of five British infantrymen which includes a squad leader, an ammunition loader, and riflemen who are cautiously carrying out a patrol. Set includes each squad member depicted in natural poses with realistic expressions. Accessories such as the Sten sub machine gun, Bren light machine gun, Enfield rifles, haverasacks, and back packs all have a fine finish. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig-Set G. Sol.Field Brief.(5)
300035212€13.99
Article number: 300035212 Product: 1:35 Fig-Set G. Sol.Field Brief.(5) This set depicts German soldiers from the middle stages of WWII in a variety of poses wearing winter uniforms and overcoats standing around a stove discussing battle strategies. ★It includes five figures depicting an officer and a noncommissioned officer looking over an open map, a soldier looking at his watch, another carrying a MG42 machine gun on his shoulder, and a squatting soldier. ★Also included in the set is a German shepherd figure lying down and accessories such as a newspaper and magazine. ★This set would go great in combination with winter-themed dioramas. Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Fig.-Set Ger.Mortar-Troop (4)
300035193€9.79
Article number: 300035193 Product: 1:35 Fig.-Set Ger.Mortar-Troop (4) During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling "fire!" The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit. Scope of delivery: kit, instructions Warning! Not suitable for children under 14 years.
Military figures & Accessories 1:35
1:35 Figure-Set US Army Infant. (4)
300035013€5.49
Article number: 300035013 Product: 1:35 Figure-Set US Army Infant. (4) This is a 1/35 scale plastic model assembly kit depicting U.S. infantry in Western Europe after the Normandy Landings in June 1944. ★Their subjects are captured in realistic pose: lobbing a grenade, cocking firearms and holding a flamethrower. ★Three of the figures are depicted in standard cloth legwear, and one in leather.
Military model vehicles 1:35
1:35 Fr. Citroen Traction Staff Car (1)
300035301€31.49
Article number: 300035301 Product: 1:35 Fr. Citroen Traction Staff Car (1) This famous French sedan was produced from 1934 to 1957 and featured a lightweight monocoque body with a high performance torsion bar spring suspension. It also had a spacious interior and featured a front-wheel drive system and a low center of gravity. The car proved to be very easy to handle and was used by the French Army, the occupying German Army, and the Free French forces. It was also used by German forces through out the European front and as far away as Russia. •Length: 125mm, Width: 48mm. •This is a 1/35 scale assembly kit model of the Citroen Traction 11CV. •The elegant form of the body and fenders has been accurately reproduced. •For easy assembly of the suspension, the number of parts is kept in check. •You can choose to assemble either open or closed front doors. •By assembling open front doors, you can enjoy viewing the the highly detailed interior. •Set includes one driver figure. •Markings for the German Army x 2, French Army x 1, and Civilian vehicle x 1 are included.(Total 4) •This model will look great in a diorama on its own or with other 1/35 scale models. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Fren. Tank R35
300035373€31.49
Article number: 300035373 Product: 1:35 Fren. Tank R35 Length: 114mm. A Doughty Light Tank By the 1930s French military planners could no longer ignore the obsolescence of their masterpiece FT17 tank from late WWI, and work started on a genuine successor to fill the void. One of the answers they came up with was the R35 light tank, which utilized rolled steel lower and three-piece cast upper hull designs and was armed with the short barreled 37mm gun. It was crewed by two. When hostilities with Nazi Germany burst into life in May 1940 the R35 was right in the front line. While it showed its armor was reliable, the 37mm gun was inadequate when it came to taking out German armor. The Fall of France in June 1940 meant that production of the R35 was curtailed to approximately 1,600 units. About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 114mm, width: 55mm. ★The R35 form with distinctive rounded hull and complex turret is accurately depicted. ★Turret utilizes slide molding for superior authenticity and a fulfiling build. ★Realistic gun elevation and traverse ranges add to the realism. ★Assembly type tracks feature one-piece straight sections for realistic depiction of upper run 'sag.' ★A single commander figure is included for installation upon the turret rear hatch. ★Comes with two early WWII marking options.
Military model vehicles 1:35
1:35 French MBT B1 bis (1)
300035282€82.99
Article number: 300035282 Product: 1:35 WWII French MBT B1 bis (1) Defender of the Republic In May 1940, B1 bis tanks stood in the way of German armies determined to strike a crushing against France on her own soil. Introduced as an upgraded version of the original Char B1, which was developed in the nineteen twenties, the B1 bis entered production in 1937. The rivet-joined hull mounted a short-barreled 75mm howitzer, while a small, one-man turret carried a longer-barreled 47mm tank gun. The B1 bis was one of the most heavily armored tanks of its time, with plating that was 60mm thick in places, more than capable of defending against anti-tank fire such as that from 37mm Pak guns. The B1 bis could more than hold its own against individual German tanks, and was greatly feared by enemy soldiers who encountered it. About the Model ★1/35 scale assembly model of the French B1 bis ★Realistically depicts tank's tall profile, 75mm gun and side armor panels covering suspension mechanisms. ★Hull parts are made using slide molding and feature accurately depicted hex bolts. ★Newly-designed track parts require no cement to assemble and snap together easily by hand. ★Commander's and driver's periscopes are moveable, as is the 75mm main gun. ★Choice of two types of fenders and exhausts, combined with 4 sets of markings allows construction of each possible combination. ★Includes realistic metal tow-chain, and 1 tank commander figure. ★Comes with colorful painting guide and four types of marking decals. ★Reverse side of painting guide features an exciting article about the exploits of B1 bis tanks facing German Panzers Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 French Med. Tank SOMUA S35
300035344€55.99
Article number: 300035344 Product: 1:35 French Med. Tank SOMUA S35 The SOMUA S35 was a French Cavalry tank of the Second World War. It was manufactured from 1936 until 1940 to equip armored divisions of the Cavalry. For its day it was a relatively agile medium-weight tank, superior in armor and armament to both its French and foreign competitors, such as the contemporary versions of the German Panzerkampfwagen III. It was constructed from well-sloped, mainly cast, armor sections, that however made it expensive to produce and time-consuming to maintain. While not given a chance to show its full effectiveness during the Battle of France in 1940, the SOMUA showed up strongly in a number of battles with German forces and indeed was used by German forces after the French defeat and even by the Allies after the liberation of France in 1944. It was among the first French tanks developed for use as a cavalry tank, as opposed to the previous infantry roles the tank was largely restricted to under French military doctrine. A cast metal body with armor up to 56mm thick gave excellent protection from German guns, and offensively it could rely on a powerful 47mm gun that repeatedly tore through German tanks. All in all, some 430 SOMUA S35s were produced. Model kit, Scale 1:35, Vehicle, 1 Figure, Manual, Decal, Length 153 mm.
Military model vehicles 1:35
1:35 Ger. 38(t) Ausf.E/F (1)
300035369€35.99
Article number: 300035369 Product: 1:35 Ger. 38(t) Ausf.E/F (1) A brand new face is welcomed to the 1/35 Military Miniatures Series with the addition of the 38(t)! This subject in fact started life as a light tank developed for Czechoslovakia, but was adopted and renamed 38(t) by German forces after their occupation of the country in 1939. It was equipped with a 3.7cm main gun and could reach speeds of up to 42km/h powered by the 125hp engine. A number of variants were produced, of which the Ausf. E/F 38(t)s were manufactured over a one-year period from November 1940; they featured improved armor and were thrown into the conflict with Soviet forces after the start of Operation Barbarossa. • This is a 1/35 scale plastic model assembly kit. • Tamiya designers studied a real 38(t) in the Kubinka Tank Museum, getting the data to make this highlyaccurate model with detail right down to the rivets. • The turret front left sight moves in conjunction with the 3.7cm gun. • Features a realistic recreation of the suspension with large road wheels and upper return rollers. • Assembly type tracks give natural recreation of the upper run ‘sag.’. They feature single piece straight sections. • The kit comes with a figure recreating a commander for placement in the cupola hatch. • Includes two marking options for vehicles with units on the Eastern Front in 1941.
Military model vehicles 1:35
1:35 Ger. Battle Tank IV F L24/75mm
300035374€53.99
Article number: 300035374 Product: 1:35 Ger. Battle Tank IV F L24/75mm Germany’s Pz.Kpfw.IV was a stalwart of the WWII effort, serving from start to finish of the conflict. Manufacture began in 1936 with the Ausf.A, and went through a number of specifications before what was perhaps the definitive short barrelled variant started production in 1941: the Ausf. F. It had reinforced armor and updated hull designs, as well as an L/24 75mm gun. Around 460 rolled off of the production lines, serving on the Eastern front as Nazi Germany grappled with the Soviet Union, and in North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • In-depth research at the German Tank Museum in Munster contributed to this highly accurate kit, which features brand new parts across the board (only the lower hull and wheels are existing designs).
Military model vehicles 1:35
1:35 Ger. Cargo Truck Krupp Protze (3)
300035317€34.99
Article number: 300035317 Product: 1:35 Ger. Cargo Truck Krupp Protze (3) Supporting the German army's mechanized Blitzkrieg during the early stages of WWII was the 6X4 Krupp Protze light truck. Popularly known as the "boxer" due to its air-cooled flat-4 engine, this vehicle provided valuable support for the rapidly moving army by towing artillery pieces and carrying troops and supplies. It's unique sloped engine cover offered excellent forward visibility and the truck was well-liked for its reliability and ease of maintenance Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Floating Car Typ 166 (1)
300035224€18.99
Article number: 300035224 Product: 1:35 Ger. Floating Car Typ 166 (1) This is a plastic assembly model kit of the 4WD Schwimmwagen which earned the trust of German soldiers with excellent performance on bad roads and fording ability. The body with hull-shaped underside has been reproduced via slide molding for a realistic finish and ease of assembly. The windshield is moveable and the screw can be positioned in the down position to allow you to depict a fording scene. Parts to depict the air-cooled four-cylinder engine also included. Interior details such as the flooring & seats, instrument panel, shift lever etc have a rich finish. The folded canvas roof cover also provides the model with great realism. A driver figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Marder I Tank Destroyer
300035370€37.99
Article number: 300035370 Product: 1:35 Ger. Marder I Tank Destroyer This is the latest subject in the long-running Tamiya 1/35 Military Miniature Series. The Marder I was one of the early German efforts to update a military that – despite crushing early successes against Poland and the Allied early in WWII – was in sore need of mechanization. Based upon the French Lorraine supply tractor, it was one of a number of commandeered vehicles pressed into German service. Around 170 were produced from May 1942, and their 7.5cm Pak40 anti-tank gun was a threat to Allied AFVs in France post-Normandy landings, and also on the Eastern Front and even North Africa. About the Model • This is a 1/35 scale plastic model assembly kit. • Tamiya designers worked up close with a specimen in the Musée de Blindés, Saumur. The result is a highly accurate depiction of the compact chassis and bulging upper hull, complete with rivet and weld line details. • Interior features gun breech detail, sights, racks, radio equipment and more. • Assembly type tracks have single piece straight sections. • Bogies have an ergonomic parts breakdown. • Two figures are pictured looking to the skies, hinting at the breakdown of air control from their Luftwaffe after the Normandy landings. • Comes with three marking options, two from Normandy and one from the Eastern Front.
Military model vehicles 1:35
1:35 Ger. Marder III M Normandy
300035364€48.99
Article number: 300035364 Product: 1:35 Ger. Marder III M Normandy About the Model ★This is a 1/35 scale plastic model assembly kit. Length: 149.5mm, width: 61mm. ★The distinctive, compact form of the AFV is captured with aplomb. ★Detailed interior really catches the eye. ★Assembly type tracks feature single piece straight sections. ★12 depictions of shells are included, and can be stowed in the rack. ★Features a photo-etched part to capture the muffler cover. ★Includes four full body figures and one torso, plus two marking options.
Military model vehicles 1:35
1:35 Ger. PzKpfw. III Ausf. L (1)
300035215€43.99
Article number: 300035215 Product: 1:35 Ger. PzKpfw. III Ausf. L (1) From the beginning and through to the middle stages of WWII, the Pz.Kpfw.IIIs along with the Pz.Kpfw.IVs were the core tanks used by German tank divisions. Each variant of the Pz.Kpfw.III including the Ausf.L was highly reliable, came armed with a long barreled 60 caliber 50mm gun and had reinforced armor. This is a 1/35 scale plastic assembly model kit of one such Ausf.L tank. Famous characteristics of the Ausf.L which include the driver's front panel and main gun mantlet have been realistically reproduced. The fighting compartment loading area, turret interior, and commander’s seat have been reproduced. You can also choose to assemble each hatch in either open or closed positions. Accessory parts seen on the hull such as spare tracks and tools feature a precise finish. A tank commander figure is included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.139 Tank De.MarderIII(2)
300035248€45.99
Article number: 300035248 Product: 1:35 Ger. SdKfz.139 Tank De.MarderIII(2) About the Model ★1/35 scale plastic assembly model kit based on the German Tank Destroyer Marder III. ★Overall length: 174mm ★Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction. ★All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated. ★Protective armor and sighting equipment moves with raising and lowering of main gun. ★Crew seats and large clamp for main gun can be modeled in the fighting or moving positions. ★Two crew figures are included in set. Five kinds of battlefield markings are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2)
300035197€43.99
Article number: 300035197 Product: 1:35 Ger. SdKfz.142/1 Sturmgesch.IIIG(2) During WWII, the German army used self-propelled guns in large quantities with one such gun being the German Sturmgeschutz III. This plastic assembly model kit realistically reproduces the form of the Ausf.G early version which was manufactured from December 1942. The distinctive low silhouette of the StuG III, with the fighting compartment mounted onto the Panzer III's hull, features great scale realism. The kit also includes parts to allow you to depict the StuG III with either a 7.5cm anti-tank howitzer or the 10.5cm gun used to support the infantry units. Parts to depict Schürzen armor as well as two figures in relaxed pose feeding and holding a puppy are also included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.161/2 Panzer IV J (1)
300035181€47.99
Article number: 300035181 Product: 1:35 Ger. SdKfz.161/2 Panzer IV J (1) For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schürzen" armor additions. Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension. Additionally, the kit features belt type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1)
300035170€43.99
Article number: 300035170 Product: 1:35 Ger. SdKfz.171 Panther Aus.G Ea.(1) This is a 1/35 scale plastic assembly kit of the Panther tank, which was deployed from 1943 in order to counter the formidable Russian T-34. The kit depicts a Panther Ausf.G, a variant produced from March 1944 which followed the earlier Ausf.D and Ausf.A. The long-barreled 75mm gun has been accurately reproduced and the escape hatch at the rear of the turret may be opened to view the gun breech even after completion. Other hatches on the model may be assembled in either open or closed positions. One tank crew figure and four markings options are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Königstiger Por-T(1)
300035169€47.99
Article number: 300035169 Product: 1:35 Ger. SdKfz.182 Königstiger Por-T(1) During design of the King Tiger, two 88mm gun-toting turret types were developed: the Porsche-produced variant was recognizable by its curved lines; this model accurately captures the form of a Porsche turreted King Tiger, hitting the nail on the head with differences from the competing Henschel ("Production") turret King Tigers, such as the tapered gun barrel and large grille covers. The model offers a choice of open or closed turret and hull hatches, and succinctly recreates the complex interweaved wheel setup. Belt-type tracks and a commander figure are packaged in the model. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.182 Pz VI Kingtiger (1)
300035164€48.99
Article number: 300035164 Product: 1:35 Ger. SdKfz.182 Pz VI Kingtiger (1) With 150mm of frontal armor and 80mm on its sides, the King Tiger was far from a welcome sight for hostile troops; this was rather exacerbated by the awe-inspiring L/71 88mm main gun. This plastic model captures the production turreted King Tiger in all its glory, with masterful depiction of the hull and its weld lines. The opening turret escape hatch allows admiration of the interior and gun breech, even after completion of the kit. Nylon mesh is included in the kit to recreate engine cover nets. Includes belt-type tracks and a realistic commander figure. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3)
300035286€44.99
Article number: 300035286 Product: 1:35 Ger. SdKfz.222 Arm.Veh. Nor.Afr.(3) About the Sd.Kfz.222 Among the many armored cars developed by Germany in WWII, the Sd.Kfz.222 is one of the most widely recognized. This light 4x4 vehicle had a distinctive hull shape thanks to its welded construction, and featured an open turret with mesh covers to protect the 3 crew members against grenades and shrapnel. It was armed with a 20mm cannon and 7.92mm machine gun and its exceptional off-road capability made it an excellent reconnaisance vehicle. About the Model •High-quality 1/35 scale assembly kit model of the Sd.Kfz.222 armored car. •Sharp, angular form of hull and turret accurately reproduced. •Open turret enables depiction of interior details such as the 20mm cannon, which features a metal barrel for enhanced realism. •Photo-etched parts for turret mesh covers included for even more detail. •Parts included for a DKW motorcycle and new parts such as hull-mounted tool box and headlight are also planned. •3 new figures are included in this kit: 1 commander and 1 radio operator located in the turret, and 1 motorcycle rider figure that can be modelled with different facial expressions and poses.
Military model vehicles 1:35
1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4)
300035195€33.99
Article number: 300035195 Product: 1:35 Ger. SdKfz.251/1 Halftr.Per.Car.(4) During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position. Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism. Scope of delivery: kit, instructions, decor Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. SdKfz.9 Famo 18to Halftrack(8)
300035239€89.99
Article number: 300035239 Product: 1:35 Ger. SdKfz.9 Famo 18to Halftrack(8) Art.Nr.: 300035239 Artikelbezeichnung: 1:35 WWII SdKfz.9 Famo 18to Halbkette(8) About the "Famo" In the wake of Blitzkrieg advances made by the Wehrmacht at the outbreak of WWII, the recovery of damaged or broken tanks from the battlefield proved relatively simple. After securing an area, reinforcing divisions could easily send inoperative vehicles back to the homeland for repair via railway. However, in the seesaw battles with the British Army in North Africa and against the Russian Army on the Russian front, the quick replenishment of tank strength became an indispensable element of Wehrmacht battle strategy. The utilization of the 18 ton Heavy Half-Track "Famo" proved fundamental to this strategy. The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops. About the Model ★1/35 plastic assembly kit of the largest half-track in the German Army. ★Overall Length: 243mm, Overall Width: 75mm. ★Highly detailed model captures the size and tank-towing power of the FAMO. ★Realistic treads and suspension. ★Synthetic rubber front tires and steerable front wheels for maximum realism. ★Rear gate and storage doors can be assembled in the open or closed position. ★Tank towing drawbar included. ★Can be assembled with or without engine side panels, revealing fully detailed engine. ★Engine can be assembled outside of FAMO. ★Eight figures (four variations) included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ger. Sturmgeschütz III B (1) StuG.
300035281€52.99
Article number: 300035281 Product: 1/35 WWII Ger.Sturmgeschütz III B (1) Germanys versatile Stug III was originally designed as an assault weapon, however also came to be used as a weapon of defense as the war progressed, providing both assault gun and anti-tank support. Based on the durable Panzer III chassis, the Stug III featured a monoblock structure with an L24 75mm short barreled gun mounted directly to the hull, eliminating the revolving turret and reducing overall height. The Ausf. B was the first truly mass produced Stug III with 250 produced from June 1940. Featuring wide tracks and powered by a 230hp Maybach HL 120 TRM engine the Ausf. B boasted a top speed of 40km/h. The Ausf. B saw action during the Balkans campaign in April 1941 and Operation Barbarossa in June, 1941. The simple construction leading to low costs and easy mass production made the Stug III one of Germanys most produced armored vehicles with over 10,000 produced during WWII.
Military model vehicles 1:35
1:35 German Heavy Tank Destroyer Elefant
300035325€76.99
Article number: 300035325 Product: 1/35 German Heavy Tank Destroyer Elefant This is a 1/35 scale assembly model of the German Heavy Tank Destroyer Elephant. Extensive research was conducted by Tamiya's designers to bring the modeling world the most accurate rendition to date. Historical background In 1941, Porsche created a prototype tank which incorporated radical features including a gasoline-electric hybrid powertrain. In 1943, the tank was transformed into the Ferdinand tank destroyer armed with an 8.8cm PaK 43 L/71 gun housed in a large box-shaped superstructure and 90 units were produced. During the Battle of Kursk, they demonstrated superior anti-armor capability to knock out T-34 and KV-1 tanks at long range, but their slow speed and unreliability resulted in many being immobilized by mechanical troubles. In 1944, 50 surviving Ferdinands were given modifications, including the addition of a machine gun, a commander's cupola, and were re-designated with the name Elefant. The Elefant saw combat on the Italian and Russian fronts, and some fought until the very end of WWII during the Battle of Berlin.
Military model vehicles 1:35
1:35 Israeli Tank M51 105mm
300035323€58.99
Article number: 300035323 Product: 1/35 Israeli Tank M51 105mm During the 1960's, the Israeli Ordnance Corps upgraded their M4A1 Sherman tanks by equipping them with the powerful French 105mm CN-105-F1 tank gun and they were redesignated as M51s. The larger gun meant a muzzle brake was installed to minimize the greater recoil effect and a counterweight was fitted to the rear of the turret. The 460hp diesel engine and the combination of the Horizontal Volute Spring Suspension (HVSS) and wider T80 tracks gave the M51 improved mobility. During the Six-Day War in 1967, the M51s were used against newer T-54/55 tanks as well as JS-3 tanks from Egyptian, Iraqi, and Syrian armies. The M51's 105mm gun could take on these adversaries by using HEAT ammunition. After the war, these M51s continued to serve with distinction until they were finally retired in the early 1980s. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Ital. MTk. Carro Armato M13/40 (2)
300035296€47.99
Article number: 300035296 Product: 1:35 Ital. MTk. Carro Armato M13/40 (2) During WWII, the Italian army used the M13/40 as its main tank. It featured a riveted construction and bogey-style wheels on a leaf spring suspension with a 47mm main gun featuring on Italy's first ever hydraulically operated turret. In addition, the M13/40 was powered by a 125hp V8 liquid-cooled diesel engine which produced a top speed of 30km/h. From July 1940 through to 1943, approximately 800 units were produced. They fought mainly alongside the German African Corps at the North African front. This is a 1/35 scale plastic assembly kit model. - Length: 143mm. The unique riveted form of this tank is faithfully reproduced. - Easy to connect assembly type tracks included. The suspension features a highly realistic finish. - Metal parts for the gun barrel and photo-etched parts for the anti-aircraft gun sight etc are included. - Other highlights of this model are its range of tools and radiator cap. - A standing figure, a sitting tank crewman figure, 3 kinds of decals for the North African front, and a set of badges of rank are included. Warning! Not suitable for children under 14 years.
Military model vehicles 1:35
1:35 Jap. Tank Type 1 w/6 Figures
300035331€40.99
Article number: 300035331 Product: 1:35 Jap. Panzer Type 1 mit 6 Figuren The Type 1 Self-Propelled Gun was produced from 1943, and around 140 were manufactured. Due to severe damage suffered during their transportation to the front line in the Phillipines, a large number of Type 1s never actually made it into battle, but those that did are said to have been rated highly by the opposing U.S. forces. About the Item • 1/35 scale plastic assembly kit model. • Length: 173 cm, Width: 67 cm. • This item features Item 35095 Japan Type 1 Self-Propelled Gun and Item 35090 Japanese Infantry Set. • The roofless fighting compartment and 75mm field gun are recreated in excellent detail. • In addition to gunner and loader figures from Item 35095, 4 soldier figures from Item 35090 are included. • Accessories such as armor-piercing and howitzer rounds are also reproduced in scale form. • Features belt-type tracks. • Includes insignia decals for figures. • Comes in a new packaging.
